Adding qemu as a submodule of KVMFORNFV

This Patch includes the changes to add qemu as a submodule to
kvmfornfv repo and make use of the updated latest qemu for the
execution of all testcase
Change-Id: I1280af507a857675c7f81d30c95255635667bdd7
Signed-off-by:RajithaY<rajithax.yerrumsetty@intel.com>

3 files changed, 0 insertions, 9762 deletions

diff --git a/qemu/fpu/softfloat-macros.h b/qemu/fpu/softfloat-macros.h
deleted file mode 100644
index 9cc6158cb..000000000
--- a/qemu/fpu/softfloat-macros.h
+++ /dev/null
@@ -1,793 +0,0 @@
-/*
- * QEMU float support macros
- *
- * The code in this source file is derived from release 2a of the SoftFloat
- * IEC/IEEE Floating-point Arithmetic Package. Those parts of the code (and
- * some later contributions) are provided under that license, as detailed below.
- * It has subsequently been modified by contributors to the QEMU Project,
- * so some portions are provided under:
- *  the SoftFloat-2a license
- *  the BSD license
- *  GPL-v2-or-later
- *
- * Any future contributions to this file after December 1st 2014 will be
- * taken to be licensed under the Softfloat-2a license unless specifically
- * indicated otherwise.
- */
-
-/*
-===============================================================================
-This C source fragment is part of the SoftFloat IEC/IEEE Floating-point
-Arithmetic Package, Release 2a.
-
-Written by John R. Hauser.  This work was made possible in part by the
-International Computer Science Institute, located at Suite 600, 1947 Center
-Street, Berkeley, California 94704.  Funding was partially provided by the
-National Science Foundation under grant MIP-9311980.  The original version
-of this code was written as part of a project to build a fixed-point vector
-processor in collaboration with the University of California at Berkeley,
-overseen by Profs. Nelson Morgan and John Wawrzynek.  More information
-is available through the Web page `http://HTTP.CS.Berkeley.EDU/~jhauser/
-arithmetic/SoftFloat.html'.
-
-THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE.  Although reasonable effort
-has been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT
-TIMES RESULT IN INCORRECT BEHAVIOR.  USE OF THIS SOFTWARE IS RESTRICTED TO
-PERSONS AND ORGANIZATIONS WHO CAN AND WILL TAKE FULL RESPONSIBILITY FOR ANY
-AND ALL LOSSES, COSTS, OR OTHER PROBLEMS ARISING FROM ITS USE.
-
-Derivative works are acceptable, even for commercial purposes, so long as
-(1) they include prominent notice that the work is derivative, and (2) they
-include prominent notice akin to these four paragraphs for those parts of
-this code that are retained.
-
-===============================================================================
-*/
-
-/* BSD licensing:
- * Copyright (c) 2006, Fabrice Bellard
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- *
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- *
- * 3. Neither the name of the copyright holder nor the names of its contributors
- * may be used to endorse or promote products derived from this software without
- * specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
- * THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/* Portions of this work are licensed under the terms of the GNU GPL,
- * version 2 or later. See the COPYING file in the top-level directory.
- */
-
-/*----------------------------------------------------------------------------
-| This macro tests for minimum version of the GNU C compiler.
-*----------------------------------------------------------------------------*/
-#if defined(__GNUC__) && defined(__GNUC_MINOR__)
-# define SOFTFLOAT_GNUC_PREREQ(maj, min) \
-         ((__GNUC__ << 16) + __GNUC_MINOR__ >= ((maj) << 16) + (min))
-#else
-# define SOFTFLOAT_GNUC_PREREQ(maj, min) 0
-#endif
-
-
-/*----------------------------------------------------------------------------
-| Shifts `a' right by the number of bits given in `count'.  If any nonzero
-| bits are shifted off, they are ``jammed'' into the least significant bit of
-| the result by setting the least significant bit to 1.  The value of `count'
-| can be arbitrarily large; in particular, if `count' is greater than 32, the
-| result will be either 0 or 1, depending on whether `a' is zero or nonzero.
-| The result is stored in the location pointed to by `zPtr'.
-*----------------------------------------------------------------------------*/
-
-static inline void shift32RightJamming(uint32_t a, int count, uint32_t *zPtr)
-{
-    uint32_t z;
-
-    if ( count == 0 ) {
-        z = a;
-    }
-    else if ( count < 32 ) {
-        z = ( a>>count ) | ( ( a<<( ( - count ) & 31 ) ) != 0 );
-    }
-    else {
-        z = ( a != 0 );
-    }
-    *zPtr = z;
-
-}
-
-/*----------------------------------------------------------------------------
-| Shifts `a' right by the number of bits given in `count'.  If any nonzero
-| bits are shifted off, they are ``jammed'' into the least significant bit of
-| the result by setting the least significant bit to 1.  The value of `count'
-| can be arbitrarily large; in particular, if `count' is greater than 64, the
-| result will be either 0 or 1, depending on whether `a' is zero or nonzero.
-| The result is stored in the location pointed to by `zPtr'.
-*----------------------------------------------------------------------------*/
-
-static inline void shift64RightJamming(uint64_t a, int count, uint64_t *zPtr)
-{
-    uint64_t z;
-
-    if ( count == 0 ) {
-        z = a;
-    }
-    else if ( count < 64 ) {
-        z = ( a>>count ) | ( ( a<<( ( - count ) & 63 ) ) != 0 );
-    }
-    else {
-        z = ( a != 0 );
-    }
-    *zPtr = z;
-
-}
-
-/*----------------------------------------------------------------------------
-| Shifts the 128-bit value formed by concatenating `a0' and `a1' right by 64
-| _plus_ the number of bits given in `count'.  The shifted result is at most
-| 64 nonzero bits; this is stored at the location pointed to by `z0Ptr'.  The
-| bits shifted off form a second 64-bit result as follows:  The _last_ bit
-| shifted off is the most-significant bit of the extra result, and the other
-| 63 bits of the extra result are all zero if and only if _all_but_the_last_
-| bits shifted off were all zero.  This extra result is stored in the location
-| pointed to by `z1Ptr'.  The value of `count' can be arbitrarily large.
-|     (This routine makes more sense if `a0' and `a1' are considered to form a
-| fixed-point value with binary point between `a0' and `a1'.  This fixed-point
-| value is shifted right by the number of bits given in `count', and the
-| integer part of the result is returned at the location pointed to by
-| `z0Ptr'.  The fractional part of the result may be slightly corrupted as
-| described above, and is returned at the location pointed to by `z1Ptr'.)
-*----------------------------------------------------------------------------*/
-
-static inline void
- shift64ExtraRightJamming(
-     uint64_t a0, uint64_t a1, int count, uint64_t *z0Ptr, uint64_t *z1Ptr)
-{
-    uint64_t z0, z1;
-    int8_t negCount = ( - count ) & 63;
-
-    if ( count == 0 ) {
-        z1 = a1;
-        z0 = a0;
-    }
-    else if ( count < 64 ) {
-        z1 = ( a0<<negCount ) | ( a1 != 0 );
-        z0 = a0>>count;
-    }
-    else {
-        if ( count == 64 ) {
-            z1 = a0 | ( a1 != 0 );
-        }
-        else {
-            z1 = ( ( a0 | a1 ) != 0 );
-        }
-        z0 = 0;
-    }
-    *z1Ptr = z1;
-    *z0Ptr = z0;
-
-}
-
-/*----------------------------------------------------------------------------
-| Shifts the 128-bit value formed by concatenating `a0' and `a1' right by the
-| number of bits given in `count'.  Any bits shifted off are lost.  The value
-| of `count' can be arbitrarily large; in particular, if `count' is greater
-| than 128, the result will be 0.  The result is broken into two 64-bit pieces
-| which are stored at the locations pointed to by `z0Ptr' and `z1Ptr'.
-*----------------------------------------------------------------------------*/
-
-static inline void
- shift128Right(
-     uint64_t a0, uint64_t a1, int count, uint64_t *z0Ptr, uint64_t *z1Ptr)
-{
-    uint64_t z0, z1;
-    int8_t negCount = ( - count ) & 63;
-
-    if ( count == 0 ) {
-        z1 = a1;
-        z0 = a0;
-    }
-    else if ( count < 64 ) {
-        z1 = ( a0<<negCount ) | ( a1>>count );
-        z0 = a0>>count;
-    }
-    else {
-        z1 = (count < 128) ? (a0 >> (count & 63)) : 0;
-        z0 = 0;
-    }
-    *z1Ptr = z1;
-    *z0Ptr = z0;
-
-}
-
-/*----------------------------------------------------------------------------
-| Shifts the 128-bit value formed by concatenating `a0' and `a1' right by the
-| number of bits given in `count'.  If any nonzero bits are shifted off, they
-| are ``jammed'' into the least significant bit of the result by setting the
-| least significant bit to 1.  The value of `count' can be arbitrarily large;
-| in particular, if `count' is greater than 128, the result will be either
-| 0 or 1, depending on whether the concatenation of `a0' and `a1' is zero or
-| nonzero.  The result is broken into two 64-bit pieces which are stored at
-| the locations pointed to by `z0Ptr' and `z1Ptr'.
-*----------------------------------------------------------------------------*/
-
-static inline void
- shift128RightJamming(
-     uint64_t a0, uint64_t a1, int count, uint64_t *z0Ptr, uint64_t *z1Ptr)
-{
-    uint64_t z0, z1;
-    int8_t negCount = ( - count ) & 63;
-
-    if ( count == 0 ) {
-        z1 = a1;
-        z0 = a0;
-    }
-    else if ( count < 64 ) {
-        z1 = ( a0<<negCount ) | ( a1>>count ) | ( ( a1<<negCount ) != 0 );
-        z0 = a0>>count;
-    }
-    else {
-        if ( count == 64 ) {
-            z1 = a0 | ( a1 != 0 );
-        }
-        else if ( count < 128 ) {
-            z1 = ( a0>>( count & 63 ) ) | ( ( ( a0<<negCount ) | a1 ) != 0 );
-        }
-        else {
-            z1 = ( ( a0 | a1 ) != 0 );
-        }
-        z0 = 0;
-    }
-    *z1Ptr = z1;
-    *z0Ptr = z0;
-
-}
-
-/*----------------------------------------------------------------------------
-| Shifts the 192-bit value formed by concatenating `a0', `a1', and `a2' right
-| by 64 _plus_ the number of bits given in `count'.  The shifted result is
-| at most 128 nonzero bits; these are broken into two 64-bit pieces which are
-| stored at the locations pointed to by `z0Ptr' and `z1Ptr'.  The bits shifted
-| off form a third 64-bit result as follows:  The _last_ bit shifted off is
-| the most-significant bit of the extra result, and the other 63 bits of the
-| extra result are all zero if and only if _all_but_the_last_ bits shifted off
-| were all zero.  This extra result is stored in the location pointed to by
-| `z2Ptr'.  The value of `count' can be arbitrarily large.
-|     (This routine makes more sense if `a0', `a1', and `a2' are considered
-| to form a fixed-point value with binary point between `a1' and `a2'.  This
-| fixed-point value is shifted right by the number of bits given in `count',
-| and the integer part of the result is returned at the locations pointed to
-| by `z0Ptr' and `z1Ptr'.  The fractional part of the result may be slightly
-| corrupted as described above, and is returned at the location pointed to by
-| `z2Ptr'.)
-*----------------------------------------------------------------------------*/
-
-static inline void
- shift128ExtraRightJamming(
-     uint64_t a0,
-     uint64_t a1,
-     uint64_t a2,
-     int count,
-     uint64_t *z0Ptr,
-     uint64_t *z1Ptr,
-     uint64_t *z2Ptr
- )
-{
-    uint64_t z0, z1, z2;
-    int8_t negCount = ( - count ) & 63;
-
-    if ( count == 0 ) {
-        z2 = a2;
-        z1 = a1;
-        z0 = a0;
-    }
-    else {
-        if ( count < 64 ) {
-            z2 = a1<<negCount;
-            z1 = ( a0<<negCount ) | ( a1>>count );
-            z0 = a0>>count;
-        }
-        else {
-            if ( count == 64 ) {
-                z2 = a1;
-                z1 = a0;
-            }
-            else {
-                a2 |= a1;
-                if ( count < 128 ) {
-                    z2 = a0<<negCount;
-                    z1 = a0>>( count & 63 );
-                }
-                else {
-                    z2 = ( count == 128 ) ? a0 : ( a0 != 0 );
-                    z1 = 0;
-                }
-            }
-            z0 = 0;
-        }
-        z2 |= ( a2 != 0 );
-    }
-    *z2Ptr = z2;
-    *z1Ptr = z1;
-    *z0Ptr = z0;
-
-}
-
-/*----------------------------------------------------------------------------
-| Shifts the 128-bit value formed by concatenating `a0' and `a1' left by the
-| number of bits given in `count'.  Any bits shifted off are lost.  The value
-| of `count' must be less than 64.  The result is broken into two 64-bit
-| pieces which are stored at the locations pointed to by `z0Ptr' and `z1Ptr'.
-*----------------------------------------------------------------------------*/
-
-static inline void
- shortShift128Left(
-     uint64_t a0, uint64_t a1, int count, uint64_t *z0Ptr, uint64_t *z1Ptr)
-{
-
-    *z1Ptr = a1<<count;
-    *z0Ptr =
-        ( count == 0 ) ? a0 : ( a0<<count ) | ( a1>>( ( - count ) & 63 ) );
-
-}
-
-/*----------------------------------------------------------------------------
-| Shifts the 192-bit value formed by concatenating `a0', `a1', and `a2' left
-| by the number of bits given in `count'.  Any bits shifted off are lost.
-| The value of `count' must be less than 64.  The result is broken into three
-| 64-bit pieces which are stored at the locations pointed to by `z0Ptr',
-| `z1Ptr', and `z2Ptr'.
-*----------------------------------------------------------------------------*/
-
-static inline void
- shortShift192Left(
-     uint64_t a0,
-     uint64_t a1,
-     uint64_t a2,
-     int count,
-     uint64_t *z0Ptr,
-     uint64_t *z1Ptr,
-     uint64_t *z2Ptr
- )
-{
-    uint64_t z0, z1, z2;
-    int8_t negCount;
-
-    z2 = a2<<count;
-    z1 = a1<<count;
-    z0 = a0<<count;
-    if ( 0 < count ) {
-        negCount = ( ( - count ) & 63 );
-        z1 |= a2>>negCount;
-        z0 |= a1>>negCount;
-    }
-    *z2Ptr = z2;
-    *z1Ptr = z1;
-    *z0Ptr = z0;
-
-}
-
-/*----------------------------------------------------------------------------
-| Adds the 128-bit value formed by concatenating `a0' and `a1' to the 128-bit
-| value formed by concatenating `b0' and `b1'.  Addition is modulo 2^128, so
-| any carry out is lost.  The result is broken into two 64-bit pieces which
-| are stored at the locations pointed to by `z0Ptr' and `z1Ptr'.
-*----------------------------------------------------------------------------*/
-
-static inline void
- add128(
-     uint64_t a0, uint64_t a1, uint64_t b0, uint64_t b1, uint64_t *z0Ptr, uint64_t *z1Ptr )
-{
-    uint64_t z1;
-
-    z1 = a1 + b1;
-    *z1Ptr = z1;
-    *z0Ptr = a0 + b0 + ( z1 < a1 );
-
-}
-
-/*----------------------------------------------------------------------------
-| Adds the 192-bit value formed by concatenating `a0', `a1', and `a2' to the
-| 192-bit value formed by concatenating `b0', `b1', and `b2'.  Addition is
-| modulo 2^192, so any carry out is lost.  The result is broken into three
-| 64-bit pieces which are stored at the locations pointed to by `z0Ptr',
-| `z1Ptr', and `z2Ptr'.
-*----------------------------------------------------------------------------*/
-
-static inline void
- add192(
-     uint64_t a0,
-     uint64_t a1,
-     uint64_t a2,
-     uint64_t b0,
-     uint64_t b1,
-     uint64_t b2,
-     uint64_t *z0Ptr,
-     uint64_t *z1Ptr,
-     uint64_t *z2Ptr
- )
-{
-    uint64_t z0, z1, z2;
-    int8_t carry0, carry1;
-
-    z2 = a2 + b2;
-    carry1 = ( z2 < a2 );
-    z1 = a1 + b1;
-    carry0 = ( z1 < a1 );
-    z0 = a0 + b0;
-    z1 += carry1;
-    z0 += ( z1 < carry1 );
-    z0 += carry0;
-    *z2Ptr = z2;
-    *z1Ptr = z1;
-    *z0Ptr = z0;
-
-}
-
-/*----------------------------------------------------------------------------
-| Subtracts the 128-bit value formed by concatenating `b0' and `b1' from the
-| 128-bit value formed by concatenating `a0' and `a1'.  Subtraction is modulo
-| 2^128, so any borrow out (carry out) is lost.  The result is broken into two
-| 64-bit pieces which are stored at the locations pointed to by `z0Ptr' and
-| `z1Ptr'.
-*----------------------------------------------------------------------------*/
-
-static inline void
- sub128(
-     uint64_t a0, uint64_t a1, uint64_t b0, uint64_t b1, uint64_t *z0Ptr, uint64_t *z1Ptr )
-{
-
-    *z1Ptr = a1 - b1;
-    *z0Ptr = a0 - b0 - ( a1 < b1 );
-
-}
-
-/*----------------------------------------------------------------------------
-| Subtracts the 192-bit value formed by concatenating `b0', `b1', and `b2'
-| from the 192-bit value formed by concatenating `a0', `a1', and `a2'.
-| Subtraction is modulo 2^192, so any borrow out (carry out) is lost.  The
-| result is broken into three 64-bit pieces which are stored at the locations
-| pointed to by `z0Ptr', `z1Ptr', and `z2Ptr'.
-*----------------------------------------------------------------------------*/
-
-static inline void
- sub192(
-     uint64_t a0,
-     uint64_t a1,
-     uint64_t a2,
-     uint64_t b0,
-     uint64_t b1,
-     uint64_t b2,
-     uint64_t *z0Ptr,
-     uint64_t *z1Ptr,
-     uint64_t *z2Ptr
- )
-{
-    uint64_t z0, z1, z2;
-    int8_t borrow0, borrow1;
-
-    z2 = a2 - b2;
-    borrow1 = ( a2 < b2 );
-    z1 = a1 - b1;
-    borrow0 = ( a1 < b1 );
-    z0 = a0 - b0;
-    z0 -= ( z1 < borrow1 );
-    z1 -= borrow1;
-    z0 -= borrow0;
-    *z2Ptr = z2;
-    *z1Ptr = z1;
-    *z0Ptr = z0;
-
-}
-
-/*----------------------------------------------------------------------------
-| Multiplies `a' by `b' to obtain a 128-bit product.  The product is broken
-| into two 64-bit pieces which are stored at the locations pointed to by
-| `z0Ptr' and `z1Ptr'.
-*----------------------------------------------------------------------------*/
-
-static inline void mul64To128( uint64_t a, uint64_t b, uint64_t *z0Ptr, uint64_t *z1Ptr )
-{
-    uint32_t aHigh, aLow, bHigh, bLow;
-    uint64_t z0, zMiddleA, zMiddleB, z1;
-
-    aLow = a;
-    aHigh = a>>32;
-    bLow = b;
-    bHigh = b>>32;
-    z1 = ( (uint64_t) aLow ) * bLow;
-    zMiddleA = ( (uint64_t) aLow ) * bHigh;
-    zMiddleB = ( (uint64_t) aHigh ) * bLow;
-    z0 = ( (uint64_t) aHigh ) * bHigh;
-    zMiddleA += zMiddleB;
-    z0 += ( ( (uint64_t) ( zMiddleA < zMiddleB ) )<<32 ) + ( zMiddleA>>32 );
-    zMiddleA <<= 32;
-    z1 += zMiddleA;
-    z0 += ( z1 < zMiddleA );
-    *z1Ptr = z1;
-    *z0Ptr = z0;
-
-}
-
-/*----------------------------------------------------------------------------
-| Multiplies the 128-bit value formed by concatenating `a0' and `a1' by
-| `b' to obtain a 192-bit product.  The product is broken into three 64-bit
-| pieces which are stored at the locations pointed to by `z0Ptr', `z1Ptr', and
-| `z2Ptr'.
-*----------------------------------------------------------------------------*/
-
-static inline void
- mul128By64To192(
-     uint64_t a0,
-     uint64_t a1,
-     uint64_t b,
-     uint64_t *z0Ptr,
-     uint64_t *z1Ptr,
-     uint64_t *z2Ptr
- )
-{
-    uint64_t z0, z1, z2, more1;
-
-    mul64To128( a1, b, &z1, &z2 );
-    mul64To128( a0, b, &z0, &more1 );
-    add128( z0, more1, 0, z1, &z0, &z1 );
-    *z2Ptr = z2;
-    *z1Ptr = z1;
-    *z0Ptr = z0;
-
-}
-
-/*----------------------------------------------------------------------------
-| Multiplies the 128-bit value formed by concatenating `a0' and `a1' to the
-| 128-bit value formed by concatenating `b0' and `b1' to obtain a 256-bit
-| product.  The product is broken into four 64-bit pieces which are stored at
-| the locations pointed to by `z0Ptr', `z1Ptr', `z2Ptr', and `z3Ptr'.
-*----------------------------------------------------------------------------*/
-
-static inline void
- mul128To256(
-     uint64_t a0,
-     uint64_t a1,
-     uint64_t b0,
-     uint64_t b1,
-     uint64_t *z0Ptr,
-     uint64_t *z1Ptr,
-     uint64_t *z2Ptr,
-     uint64_t *z3Ptr
- )
-{
-    uint64_t z0, z1, z2, z3;
-    uint64_t more1, more2;
-
-    mul64To128( a1, b1, &z2, &z3 );
-    mul64To128( a1, b0, &z1, &more2 );
-    add128( z1, more2, 0, z2, &z1, &z2 );
-    mul64To128( a0, b0, &z0, &more1 );
-    add128( z0, more1, 0, z1, &z0, &z1 );
-    mul64To128( a0, b1, &more1, &more2 );
-    add128( more1, more2, 0, z2, &more1, &z2 );
-    add128( z0, z1, 0, more1, &z0, &z1 );
-    *z3Ptr = z3;
-    *z2Ptr = z2;
-    *z1Ptr = z1;
-    *z0Ptr = z0;
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns an approximation to the 64-bit integer quotient obtained by dividing
-| `b' into the 128-bit value formed by concatenating `a0' and `a1'.  The
-| divisor `b' must be at least 2^63.  If q is the exact quotient truncated
-| toward zero, the approximation returned lies between q and q + 2 inclusive.
-| If the exact quotient q is larger than 64 bits, the maximum positive 64-bit
-| unsigned integer is returned.
-*----------------------------------------------------------------------------*/
-
-static uint64_t estimateDiv128To64( uint64_t a0, uint64_t a1, uint64_t b )
-{
-    uint64_t b0, b1;
-    uint64_t rem0, rem1, term0, term1;
-    uint64_t z;
-
-    if ( b <= a0 ) return LIT64( 0xFFFFFFFFFFFFFFFF );
-    b0 = b>>32;
-    z = ( b0<<32 <= a0 ) ? LIT64( 0xFFFFFFFF00000000 ) : ( a0 / b0 )<<32;
-    mul64To128( b, z, &term0, &term1 );
-    sub128( a0, a1, term0, term1, &rem0, &rem1 );
-    while ( ( (int64_t) rem0 ) < 0 ) {
-        z -= LIT64( 0x100000000 );
-        b1 = b<<32;
-        add128( rem0, rem1, b0, b1, &rem0, &rem1 );
-    }
-    rem0 = ( rem0<<32 ) | ( rem1>>32 );
-    z |= ( b0<<32 <= rem0 ) ? 0xFFFFFFFF : rem0 / b0;
-    return z;
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns an approximation to the square root of the 32-bit significand given
-| by `a'.  Considered as an integer, `a' must be at least 2^31.  If bit 0 of
-| `aExp' (the least significant bit) is 1, the integer returned approximates
-| 2^31*sqrt(`a'/2^31), where `a' is considered an integer.  If bit 0 of `aExp'
-| is 0, the integer returned approximates 2^31*sqrt(`a'/2^30).  In either
-| case, the approximation returned lies strictly within +/-2 of the exact
-| value.
-*----------------------------------------------------------------------------*/
-
-static uint32_t estimateSqrt32(int aExp, uint32_t a)
-{
-    static const uint16_t sqrtOddAdjustments[] = {
-        0x0004, 0x0022, 0x005D, 0x00B1, 0x011D, 0x019F, 0x0236, 0x02E0,
-        0x039C, 0x0468, 0x0545, 0x0631, 0x072B, 0x0832, 0x0946, 0x0A67
-    };
-    static const uint16_t sqrtEvenAdjustments[] = {
-        0x0A2D, 0x08AF, 0x075A, 0x0629, 0x051A, 0x0429, 0x0356, 0x029E,
-        0x0200, 0x0179, 0x0109, 0x00AF, 0x0068, 0x0034, 0x0012, 0x0002
-    };
-    int8_t index;
-    uint32_t z;
-
-    index = ( a>>27 ) & 15;
-    if ( aExp & 1 ) {
-        z = 0x4000 + ( a>>17 ) - sqrtOddAdjustments[ (int)index ];
-        z = ( ( a / z )<<14 ) + ( z<<15 );
-        a >>= 1;
-    }
-    else {
-        z = 0x8000 + ( a>>17 ) - sqrtEvenAdjustments[ (int)index ];
-        z = a / z + z;
-        z = ( 0x20000 <= z ) ? 0xFFFF8000 : ( z<<15 );
-        if ( z <= a ) return (uint32_t) ( ( (int32_t) a )>>1 );
-    }
-    return ( (uint32_t) ( ( ( (uint64_t) a )<<31 ) / z ) ) + ( z>>1 );
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the number of leading 0 bits before the most-significant 1 bit of
-| `a'.  If `a' is zero, 32 is returned.
-*----------------------------------------------------------------------------*/
-
-static int8_t countLeadingZeros32( uint32_t a )
-{
-#if SOFTFLOAT_GNUC_PREREQ(3, 4)
-    if (a) {
-        return __builtin_clz(a);
-    } else {
-        return 32;
-    }
-#else
-    static const int8_t countLeadingZerosHigh[] = {
-        8, 7, 6, 6, 5, 5, 5, 5, 4, 4, 4, 4, 4, 4, 4, 4,
-        3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3,
-        2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-        2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-        1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
-        1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
-        1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
-        1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
-        0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-        0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-        0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-        0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-        0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-        0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-        0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-        0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
-    };
-    int8_t shiftCount;
-
-    shiftCount = 0;
-    if ( a < 0x10000 ) {
-        shiftCount += 16;
-        a <<= 16;
-    }
-    if ( a < 0x1000000 ) {
-        shiftCount += 8;
-        a <<= 8;
-    }
-    shiftCount += countLeadingZerosHigh[ a>>24 ];
-    return shiftCount;
-#endif
-}
-
-/*----------------------------------------------------------------------------
-| Returns the number of leading 0 bits before the most-significant 1 bit of
-| `a'.  If `a' is zero, 64 is returned.
-*----------------------------------------------------------------------------*/
-
-static int8_t countLeadingZeros64( uint64_t a )
-{
-#if SOFTFLOAT_GNUC_PREREQ(3, 4)
-    if (a) {
-        return __builtin_clzll(a);
-    } else {
-        return 64;
-    }
-#else
-    int8_t shiftCount;
-
-    shiftCount = 0;
-    if ( a < ( (uint64_t) 1 )<<32 ) {
-        shiftCount += 32;
-    }
-    else {
-        a >>= 32;
-    }
-    shiftCount += countLeadingZeros32( a );
-    return shiftCount;
-#endif
-}
-
-/*----------------------------------------------------------------------------
-| Returns 1 if the 128-bit value formed by concatenating `a0' and `a1'
-| is equal to the 128-bit value formed by concatenating `b0' and `b1'.
-| Otherwise, returns 0.
-*----------------------------------------------------------------------------*/
-
-static inline flag eq128( uint64_t a0, uint64_t a1, uint64_t b0, uint64_t b1 )
-{
-
-    return ( a0 == b0 ) && ( a1 == b1 );
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns 1 if the 128-bit value formed by concatenating `a0' and `a1' is less
-| than or equal to the 128-bit value formed by concatenating `b0' and `b1'.
-| Otherwise, returns 0.
-*----------------------------------------------------------------------------*/
-
-static inline flag le128( uint64_t a0, uint64_t a1, uint64_t b0, uint64_t b1 )
-{
-
-    return ( a0 < b0 ) || ( ( a0 == b0 ) && ( a1 <= b1 ) );
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns 1 if the 128-bit value formed by concatenating `a0' and `a1' is less
-| than the 128-bit value formed by concatenating `b0' and `b1'.  Otherwise,
-| returns 0.
-*----------------------------------------------------------------------------*/
-
-static inline flag lt128( uint64_t a0, uint64_t a1, uint64_t b0, uint64_t b1 )
-{
-
-    return ( a0 < b0 ) || ( ( a0 == b0 ) && ( a1 < b1 ) );
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns 1 if the 128-bit value formed by concatenating `a0' and `a1' is
-| not equal to the 128-bit value formed by concatenating `b0' and `b1'.
-| Otherwise, returns 0.
-*----------------------------------------------------------------------------*/
-
-static inline flag ne128( uint64_t a0, uint64_t a1, uint64_t b0, uint64_t b1 )
-{
-
-    return ( a0 != b0 ) || ( a1 != b1 );
-
-}
diff --git a/qemu/fpu/softfloat-specialize.h b/qemu/fpu/softfloat-specialize.h
deleted file mode 100644
index a4cbdad45..000000000
--- a/qemu/fpu/softfloat-specialize.h
+++ /dev/null
@@ -1,1236 +0,0 @@
-/*
- * QEMU float support
- *
- * The code in this source file is derived from release 2a of the SoftFloat
- * IEC/IEEE Floating-point Arithmetic Package. Those parts of the code (and
- * some later contributions) are provided under that license, as detailed below.
- * It has subsequently been modified by contributors to the QEMU Project,
- * so some portions are provided under:
- *  the SoftFloat-2a license
- *  the BSD license
- *  GPL-v2-or-later
- *
- * Any future contributions to this file after December 1st 2014 will be
- * taken to be licensed under the Softfloat-2a license unless specifically
- * indicated otherwise.
- */
-
-/*
-===============================================================================
-This C source fragment is part of the SoftFloat IEC/IEEE Floating-point
-Arithmetic Package, Release 2a.
-
-Written by John R. Hauser.  This work was made possible in part by the
-International Computer Science Institute, located at Suite 600, 1947 Center
-Street, Berkeley, California 94704.  Funding was partially provided by the
-National Science Foundation under grant MIP-9311980.  The original version
-of this code was written as part of a project to build a fixed-point vector
-processor in collaboration with the University of California at Berkeley,
-overseen by Profs. Nelson Morgan and John Wawrzynek.  More information
-is available through the Web page `http://HTTP.CS.Berkeley.EDU/~jhauser/
-arithmetic/SoftFloat.html'.
-
-THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE.  Although reasonable effort
-has been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT
-TIMES RESULT IN INCORRECT BEHAVIOR.  USE OF THIS SOFTWARE IS RESTRICTED TO
-PERSONS AND ORGANIZATIONS WHO CAN AND WILL TAKE FULL RESPONSIBILITY FOR ANY
-AND ALL LOSSES, COSTS, OR OTHER PROBLEMS ARISING FROM ITS USE.
-
-Derivative works are acceptable, even for commercial purposes, so long as
-(1) they include prominent notice that the work is derivative, and (2) they
-include prominent notice akin to these four paragraphs for those parts of
-this code that are retained.
-
-===============================================================================
-*/
-
-/* BSD licensing:
- * Copyright (c) 2006, Fabrice Bellard
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- *
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- *
- * 3. Neither the name of the copyright holder nor the names of its contributors
- * may be used to endorse or promote products derived from this software without
- * specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
- * THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/* Portions of this work are licensed under the terms of the GNU GPL,
- * version 2 or later. See the COPYING file in the top-level directory.
- */
-
-/* Does the target distinguish signaling NaNs from non-signaling NaNs
- * by setting the most significant bit of the mantissa for a signaling NaN?
- * (The more common choice is to have it be zero for SNaN and one for QNaN.)
- */
-#if defined(TARGET_MIPS) || defined(TARGET_SH4) || defined(TARGET_UNICORE32)
-#define SNAN_BIT_IS_ONE 1
-#else
-#define SNAN_BIT_IS_ONE 0
-#endif
-
-#if defined(TARGET_XTENSA)
-/* Define for architectures which deviate from IEEE in not supporting
- * signaling NaNs (so all NaNs are treated as quiet).
- */
-#define NO_SIGNALING_NANS 1
-#endif
-
-/*----------------------------------------------------------------------------
-| The pattern for a default generated half-precision NaN.
-*----------------------------------------------------------------------------*/
-#if defined(TARGET_ARM)
-const float16 float16_default_nan = const_float16(0x7E00);
-#elif SNAN_BIT_IS_ONE
-const float16 float16_default_nan = const_float16(0x7DFF);
-#else
-const float16 float16_default_nan = const_float16(0xFE00);
-#endif
-
-/*----------------------------------------------------------------------------
-| The pattern for a default generated single-precision NaN.
-*----------------------------------------------------------------------------*/
-#if defined(TARGET_SPARC)
-const float32 float32_default_nan = const_float32(0x7FFFFFFF);
-#elif defined(TARGET_PPC) || defined(TARGET_ARM) || defined(TARGET_ALPHA) || \
-      defined(TARGET_XTENSA) || defined(TARGET_S390X) || defined(TARGET_TRICORE)
-const float32 float32_default_nan = const_float32(0x7FC00000);
-#elif SNAN_BIT_IS_ONE
-const float32 float32_default_nan = const_float32(0x7FBFFFFF);
-#else
-const float32 float32_default_nan = const_float32(0xFFC00000);
-#endif
-
-/*----------------------------------------------------------------------------
-| The pattern for a default generated double-precision NaN.
-*----------------------------------------------------------------------------*/
-#if defined(TARGET_SPARC)
-const float64 float64_default_nan = const_float64(LIT64( 0x7FFFFFFFFFFFFFFF ));
-#elif defined(TARGET_PPC) || defined(TARGET_ARM) || defined(TARGET_ALPHA) || \
-      defined(TARGET_S390X)
-const float64 float64_default_nan = const_float64(LIT64( 0x7FF8000000000000 ));
-#elif SNAN_BIT_IS_ONE
-const float64 float64_default_nan = const_float64(LIT64(0x7FF7FFFFFFFFFFFF));
-#else
-const float64 float64_default_nan = const_float64(LIT64( 0xFFF8000000000000 ));
-#endif
-
-/*----------------------------------------------------------------------------
-| The pattern for a default generated extended double-precision NaN.
-*----------------------------------------------------------------------------*/
-#if SNAN_BIT_IS_ONE
-#define floatx80_default_nan_high 0x7FFF
-#define floatx80_default_nan_low  LIT64(0xBFFFFFFFFFFFFFFF)
-#else
-#define floatx80_default_nan_high 0xFFFF
-#define floatx80_default_nan_low  LIT64( 0xC000000000000000 )
-#endif
-
-const floatx80 floatx80_default_nan
-    = make_floatx80_init(floatx80_default_nan_high, floatx80_default_nan_low);
-
-/*----------------------------------------------------------------------------
-| The pattern for a default generated quadruple-precision NaN.  The `high' and
-| `low' values hold the most- and least-significant bits, respectively.
-*----------------------------------------------------------------------------*/
-#if SNAN_BIT_IS_ONE
-#define float128_default_nan_high LIT64(0x7FFF7FFFFFFFFFFF)
-#define float128_default_nan_low  LIT64(0xFFFFFFFFFFFFFFFF)
-#elif defined(TARGET_S390X)
-#define float128_default_nan_high LIT64( 0x7FFF800000000000 )
-#define float128_default_nan_low  LIT64( 0x0000000000000000 )
-#else
-#define float128_default_nan_high LIT64( 0xFFFF800000000000 )
-#define float128_default_nan_low  LIT64( 0x0000000000000000 )
-#endif
-
-const float128 float128_default_nan
-    = make_float128_init(float128_default_nan_high, float128_default_nan_low);
-
-/*----------------------------------------------------------------------------
-| Raises the exceptions specified by `flags'.  Floating-point traps can be
-| defined here if desired.  It is currently not possible for such a trap
-| to substitute a result value.  If traps are not implemented, this routine
-| should be simply `float_exception_flags |= flags;'.
-*----------------------------------------------------------------------------*/
-
-void float_raise(int8_t flags, float_status *status)
-{
-    status->float_exception_flags |= flags;
-}
-
-/*----------------------------------------------------------------------------
-| Internal canonical NaN format.
-*----------------------------------------------------------------------------*/
-typedef struct {
-    flag sign;
-    uint64_t high, low;
-} commonNaNT;
-
-#ifdef NO_SIGNALING_NANS
-int float16_is_quiet_nan(float16 a_)
-{
-    return float16_is_any_nan(a_);
-}
-
-int float16_is_signaling_nan(float16 a_)
-{
-    return 0;
-}
-#else
-/*----------------------------------------------------------------------------
-| Returns 1 if the half-precision floating-point value `a' is a quiet
-| NaN; otherwise returns 0.
-*----------------------------------------------------------------------------*/
-
-int float16_is_quiet_nan(float16 a_)
-{
-    uint16_t a = float16_val(a_);
-#if SNAN_BIT_IS_ONE
-    return (((a >> 9) & 0x3F) == 0x3E) && (a & 0x1FF);
-#else
-    return ((a & ~0x8000) >= 0x7c80);
-#endif
-}
-
-/*----------------------------------------------------------------------------
-| Returns 1 if the half-precision floating-point value `a' is a signaling
-| NaN; otherwise returns 0.
-*----------------------------------------------------------------------------*/
-
-int float16_is_signaling_nan(float16 a_)
-{
-    uint16_t a = float16_val(a_);
-#if SNAN_BIT_IS_ONE
-    return ((a & ~0x8000) >= 0x7c80);
-#else
-    return (((a >> 9) & 0x3F) == 0x3E) && (a & 0x1FF);
-#endif
-}
-#endif
-
-/*----------------------------------------------------------------------------
-| Returns a quiet NaN if the half-precision floating point value `a' is a
-| signaling NaN; otherwise returns `a'.
-*----------------------------------------------------------------------------*/
-float16 float16_maybe_silence_nan(float16 a_)
-{
-    if (float16_is_signaling_nan(a_)) {
-#if SNAN_BIT_IS_ONE
-#  if defined(TARGET_MIPS) || defined(TARGET_SH4) || defined(TARGET_UNICORE32)
-        return float16_default_nan;
-#  else
-#    error Rules for silencing a signaling NaN are target-specific
-#  endif
-#else
-        uint16_t a = float16_val(a_);
-        a |= (1 << 9);
-        return make_float16(a);
-#endif
-    }
-    return a_;
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of converting the half-precision floating-point NaN
-| `a' to the canonical NaN format.  If `a' is a signaling NaN, the invalid
-| exception is raised.
-*----------------------------------------------------------------------------*/
-
-static commonNaNT float16ToCommonNaN(float16 a, float_status *status)
-{
-    commonNaNT z;
-
-    if (float16_is_signaling_nan(a)) {
-        float_raise(float_flag_invalid, status);
-    }
-    z.sign = float16_val(a) >> 15;
-    z.low = 0;
-    z.high = ((uint64_t) float16_val(a))<<54;
-    return z;
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of converting the canonical NaN `a' to the half-
-| precision floating-point format.
-*----------------------------------------------------------------------------*/
-
-static float16 commonNaNToFloat16(commonNaNT a, float_status *status)
-{
-    uint16_t mantissa = a.high>>54;
-
-    if (status->default_nan_mode) {
-        return float16_default_nan;
-    }
-
-    if (mantissa) {
-        return make_float16(((((uint16_t) a.sign) << 15)
-                             | (0x1F << 10) | mantissa));
-    } else {
-        return float16_default_nan;
-    }
-}
-
-#ifdef NO_SIGNALING_NANS
-int float32_is_quiet_nan(float32 a_)
-{
-    return float32_is_any_nan(a_);
-}
-
-int float32_is_signaling_nan(float32 a_)
-{
-    return 0;
-}
-#else
-/*----------------------------------------------------------------------------
-| Returns 1 if the single-precision floating-point value `a' is a quiet
-| NaN; otherwise returns 0.
-*----------------------------------------------------------------------------*/
-
-int float32_is_quiet_nan( float32 a_ )
-{
-    uint32_t a = float32_val(a_);
-#if SNAN_BIT_IS_ONE
-    return (((a >> 22) & 0x1ff) == 0x1fe) && (a & 0x003fffff);
-#else
-    return ((uint32_t)(a << 1) >= 0xff800000);
-#endif
-}
-
-/*----------------------------------------------------------------------------
-| Returns 1 if the single-precision floating-point value `a' is a signaling
-| NaN; otherwise returns 0.
-*----------------------------------------------------------------------------*/
-
-int float32_is_signaling_nan( float32 a_ )
-{
-    uint32_t a = float32_val(a_);
-#if SNAN_BIT_IS_ONE
-    return ((uint32_t)(a << 1) >= 0xff800000);
-#else
-    return ( ( ( a>>22 ) & 0x1FF ) == 0x1FE ) && ( a & 0x003FFFFF );
-#endif
-}
-#endif
-
-/*----------------------------------------------------------------------------
-| Returns a quiet NaN if the single-precision floating point value `a' is a
-| signaling NaN; otherwise returns `a'.
-*----------------------------------------------------------------------------*/
-
-float32 float32_maybe_silence_nan( float32 a_ )
-{
-    if (float32_is_signaling_nan(a_)) {
-#if SNAN_BIT_IS_ONE
-#  if defined(TARGET_MIPS) || defined(TARGET_SH4) || defined(TARGET_UNICORE32)
-        return float32_default_nan;
-#  else
-#    error Rules for silencing a signaling NaN are target-specific
-#  endif
-#else
-        uint32_t a = float32_val(a_);
-        a |= (1 << 22);
-        return make_float32(a);
-#endif
-    }
-    return a_;
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of converting the single-precision floating-point NaN
-| `a' to the canonical NaN format.  If `a' is a signaling NaN, the invalid
-| exception is raised.
-*----------------------------------------------------------------------------*/
-
-static commonNaNT float32ToCommonNaN(float32 a, float_status *status)
-{
-    commonNaNT z;
-
-    if (float32_is_signaling_nan(a)) {
-        float_raise(float_flag_invalid, status);
-    }
-    z.sign = float32_val(a)>>31;
-    z.low = 0;
-    z.high = ( (uint64_t) float32_val(a) )<<41;
-    return z;
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of converting the canonical NaN `a' to the single-
-| precision floating-point format.
-*----------------------------------------------------------------------------*/
-
-static float32 commonNaNToFloat32(commonNaNT a, float_status *status)
-{
-    uint32_t mantissa = a.high>>41;
-
-    if (status->default_nan_mode) {
-        return float32_default_nan;
-    }
-
-    if ( mantissa )
-        return make_float32(
-            ( ( (uint32_t) a.sign )<<31 ) | 0x7F800000 | ( a.high>>41 ) );
-    else
-        return float32_default_nan;
-}
-
-/*----------------------------------------------------------------------------
-| Select which NaN to propagate for a two-input operation.
-| IEEE754 doesn't specify all the details of this, so the
-| algorithm is target-specific.
-| The routine is passed various bits of information about the
-| two NaNs and should return 0 to select NaN a and 1 for NaN b.
-| Note that signalling NaNs are always squashed to quiet NaNs
-| by the caller, by calling floatXX_maybe_silence_nan() before
-| returning them.
-|
-| aIsLargerSignificand is only valid if both a and b are NaNs
-| of some kind, and is true if a has the larger significand,
-| or if both a and b have the same significand but a is
-| positive but b is negative. It is only needed for the x87
-| tie-break rule.
-*----------------------------------------------------------------------------*/
-
-#if defined(TARGET_ARM)
-static int pickNaN(flag aIsQNaN, flag aIsSNaN, flag bIsQNaN, flag bIsSNaN,
-                    flag aIsLargerSignificand)
-{
-    /* ARM mandated NaN propagation rules: take the first of:
-     *  1. A if it is signaling
-     *  2. B if it is signaling
-     *  3. A (quiet)
-     *  4. B (quiet)
-     * A signaling NaN is always quietened before returning it.
-     */
-    if (aIsSNaN) {
-        return 0;
-    } else if (bIsSNaN) {
-        return 1;
-    } else if (aIsQNaN) {
-        return 0;
-    } else {
-        return 1;
-    }
-}
-#elif defined(TARGET_MIPS)
-static int pickNaN(flag aIsQNaN, flag aIsSNaN, flag bIsQNaN, flag bIsSNaN,
-                    flag aIsLargerSignificand)
-{
-    /* According to MIPS specifications, if one of the two operands is
-     * a sNaN, a new qNaN has to be generated. This is done in
-     * floatXX_maybe_silence_nan(). For qNaN inputs the specifications
-     * says: "When possible, this QNaN result is one of the operand QNaN
-     * values." In practice it seems that most implementations choose
-     * the first operand if both operands are qNaN. In short this gives
-     * the following rules:
-     *  1. A if it is signaling
-     *  2. B if it is signaling
-     *  3. A (quiet)
-     *  4. B (quiet)
-     * A signaling NaN is always silenced before returning it.
-     */
-    if (aIsSNaN) {
-        return 0;
-    } else if (bIsSNaN) {
-        return 1;
-    } else if (aIsQNaN) {
-        return 0;
-    } else {
-        return 1;
-    }
-}
-#elif defined(TARGET_PPC) || defined(TARGET_XTENSA)
-static int pickNaN(flag aIsQNaN, flag aIsSNaN, flag bIsQNaN, flag bIsSNaN,
-                   flag aIsLargerSignificand)
-{
-    /* PowerPC propagation rules:
-     *  1. A if it sNaN or qNaN
-     *  2. B if it sNaN or qNaN
-     * A signaling NaN is always silenced before returning it.
-     */
-    if (aIsSNaN || aIsQNaN) {
-        return 0;
-    } else {
-        return 1;
-    }
-}
-#else
-static int pickNaN(flag aIsQNaN, flag aIsSNaN, flag bIsQNaN, flag bIsSNaN,
-                    flag aIsLargerSignificand)
-{
-    /* This implements x87 NaN propagation rules:
-     * SNaN + QNaN => return the QNaN
-     * two SNaNs => return the one with the larger significand, silenced
-     * two QNaNs => return the one with the larger significand
-     * SNaN and a non-NaN => return the SNaN, silenced
-     * QNaN and a non-NaN => return the QNaN
-     *
-     * If we get down to comparing significands and they are the same,
-     * return the NaN with the positive sign bit (if any).
-     */
-    if (aIsSNaN) {
-        if (bIsSNaN) {
-            return aIsLargerSignificand ? 0 : 1;
-        }
-        return bIsQNaN ? 1 : 0;
-    }
-    else if (aIsQNaN) {
-        if (bIsSNaN || !bIsQNaN)
-            return 0;
-        else {
-            return aIsLargerSignificand ? 0 : 1;
-        }
-    } else {
-        return 1;
-    }
-}
-#endif
-
-/*----------------------------------------------------------------------------
-| Select which NaN to propagate for a three-input operation.
-| For the moment we assume that no CPU needs the 'larger significand'
-| information.
-| Return values : 0 : a; 1 : b; 2 : c; 3 : default-NaN
-*----------------------------------------------------------------------------*/
-#if defined(TARGET_ARM)
-static int pickNaNMulAdd(flag aIsQNaN, flag aIsSNaN, flag bIsQNaN, flag bIsSNaN,
-                         flag cIsQNaN, flag cIsSNaN, flag infzero,
-                         float_status *status)
-{
-    /* For ARM, the (inf,zero,qnan) case sets InvalidOp and returns
-     * the default NaN
-     */
-    if (infzero && cIsQNaN) {
-        float_raise(float_flag_invalid, status);
-        return 3;
-    }
-
-    /* This looks different from the ARM ARM pseudocode, because the ARM ARM
-     * puts the operands to a fused mac operation (a*b)+c in the order c,a,b.
-     */
-    if (cIsSNaN) {
-        return 2;
-    } else if (aIsSNaN) {
-        return 0;
-    } else if (bIsSNaN) {
-        return 1;
-    } else if (cIsQNaN) {
-        return 2;
-    } else if (aIsQNaN) {
-        return 0;
-    } else {
-        return 1;
-    }
-}
-#elif defined(TARGET_MIPS)
-static int pickNaNMulAdd(flag aIsQNaN, flag aIsSNaN, flag bIsQNaN, flag bIsSNaN,
-                         flag cIsQNaN, flag cIsSNaN, flag infzero,
-                         float_status *status)
-{
-    /* For MIPS, the (inf,zero,qnan) case sets InvalidOp and returns
-     * the default NaN
-     */
-    if (infzero) {
-        float_raise(float_flag_invalid, status);
-        return 3;
-    }
-
-    /* Prefer sNaN over qNaN, in the a, b, c order. */
-    if (aIsSNaN) {
-        return 0;
-    } else if (bIsSNaN) {
-        return 1;
-    } else if (cIsSNaN) {
-        return 2;
-    } else if (aIsQNaN) {
-        return 0;
-    } else if (bIsQNaN) {
-        return 1;
-    } else {
-        return 2;
-    }
-}
-#elif defined(TARGET_PPC)
-static int pickNaNMulAdd(flag aIsQNaN, flag aIsSNaN, flag bIsQNaN, flag bIsSNaN,
-                         flag cIsQNaN, flag cIsSNaN, flag infzero,
-                         float_status *status)
-{
-    /* For PPC, the (inf,zero,qnan) case sets InvalidOp, but we prefer
-     * to return an input NaN if we have one (ie c) rather than generating
-     * a default NaN
-     */
-    if (infzero) {
-        float_raise(float_flag_invalid, status);
-        return 2;
-    }
-
-    /* If fRA is a NaN return it; otherwise if fRB is a NaN return it;
-     * otherwise return fRC. Note that muladd on PPC is (fRA * fRC) + frB
-     */
-    if (aIsSNaN || aIsQNaN) {
-        return 0;
-    } else if (cIsSNaN || cIsQNaN) {
-        return 2;
-    } else {
-        return 1;
-    }
-}
-#else
-/* A default implementation: prefer a to b to c.
- * This is unlikely to actually match any real implementation.
- */
-static int pickNaNMulAdd(flag aIsQNaN, flag aIsSNaN, flag bIsQNaN, flag bIsSNaN,
-                         flag cIsQNaN, flag cIsSNaN, flag infzero,
-                         float_status *status)
-{
-    if (aIsSNaN || aIsQNaN) {
-        return 0;
-    } else if (bIsSNaN || bIsQNaN) {
-        return 1;
-    } else {
-        return 2;
-    }
-}
-#endif
-
-/*----------------------------------------------------------------------------
-| Takes two single-precision floating-point values `a' and `b', one of which
-| is a NaN, and returns the appropriate NaN result.  If either `a' or `b' is a
-| signaling NaN, the invalid exception is raised.
-*----------------------------------------------------------------------------*/
-
-static float32 propagateFloat32NaN(float32 a, float32 b, float_status *status)
-{
-    flag aIsQuietNaN, aIsSignalingNaN, bIsQuietNaN, bIsSignalingNaN;
-    flag aIsLargerSignificand;
-    uint32_t av, bv;
-
-    aIsQuietNaN = float32_is_quiet_nan( a );
-    aIsSignalingNaN = float32_is_signaling_nan( a );
-    bIsQuietNaN = float32_is_quiet_nan( b );
-    bIsSignalingNaN = float32_is_signaling_nan( b );
-    av = float32_val(a);
-    bv = float32_val(b);
-
-    if (aIsSignalingNaN | bIsSignalingNaN) {
-        float_raise(float_flag_invalid, status);
-    }
-
-    if (status->default_nan_mode)
-        return float32_default_nan;
-
-    if ((uint32_t)(av<<1) < (uint32_t)(bv<<1)) {
-        aIsLargerSignificand = 0;
-    } else if ((uint32_t)(bv<<1) < (uint32_t)(av<<1)) {
-        aIsLargerSignificand = 1;
-    } else {
-        aIsLargerSignificand = (av < bv) ? 1 : 0;
-    }
-
-    if (pickNaN(aIsQuietNaN, aIsSignalingNaN, bIsQuietNaN, bIsSignalingNaN,
-                aIsLargerSignificand)) {
-        return float32_maybe_silence_nan(b);
-    } else {
-        return float32_maybe_silence_nan(a);
-    }
-}
-
-/*----------------------------------------------------------------------------
-| Takes three single-precision floating-point values `a', `b' and `c', one of
-| which is a NaN, and returns the appropriate NaN result.  If any of  `a',
-| `b' or `c' is a signaling NaN, the invalid exception is raised.
-| The input infzero indicates whether a*b was 0*inf or inf*0 (in which case
-| obviously c is a NaN, and whether to propagate c or some other NaN is
-| implementation defined).
-*----------------------------------------------------------------------------*/
-
-static float32 propagateFloat32MulAddNaN(float32 a, float32 b,
-                                         float32 c, flag infzero,
-                                         float_status *status)
-{
-    flag aIsQuietNaN, aIsSignalingNaN, bIsQuietNaN, bIsSignalingNaN,
-        cIsQuietNaN, cIsSignalingNaN;
-    int which;
-
-    aIsQuietNaN = float32_is_quiet_nan(a);
-    aIsSignalingNaN = float32_is_signaling_nan(a);
-    bIsQuietNaN = float32_is_quiet_nan(b);
-    bIsSignalingNaN = float32_is_signaling_nan(b);
-    cIsQuietNaN = float32_is_quiet_nan(c);
-    cIsSignalingNaN = float32_is_signaling_nan(c);
-
-    if (aIsSignalingNaN | bIsSignalingNaN | cIsSignalingNaN) {
-        float_raise(float_flag_invalid, status);
-    }
-
-    which = pickNaNMulAdd(aIsQuietNaN, aIsSignalingNaN,
-                          bIsQuietNaN, bIsSignalingNaN,
-                          cIsQuietNaN, cIsSignalingNaN, infzero, status);
-
-    if (status->default_nan_mode) {
-        /* Note that this check is after pickNaNMulAdd so that function
-         * has an opportunity to set the Invalid flag.
-         */
-        return float32_default_nan;
-    }
-
-    switch (which) {
-    case 0:
-        return float32_maybe_silence_nan(a);
-    case 1:
-        return float32_maybe_silence_nan(b);
-    case 2:
-        return float32_maybe_silence_nan(c);
-    case 3:
-    default:
-        return float32_default_nan;
-    }
-}
-
-#ifdef NO_SIGNALING_NANS
-int float64_is_quiet_nan(float64 a_)
-{
-    return float64_is_any_nan(a_);
-}
-
-int float64_is_signaling_nan(float64 a_)
-{
-    return 0;
-}
-#else
-/*----------------------------------------------------------------------------
-| Returns 1 if the double-precision floating-point value `a' is a quiet
-| NaN; otherwise returns 0.
-*----------------------------------------------------------------------------*/
-
-int float64_is_quiet_nan( float64 a_ )
-{
-    uint64_t a = float64_val(a_);
-#if SNAN_BIT_IS_ONE
-    return (((a >> 51) & 0xfff) == 0xffe)
-           && (a & 0x0007ffffffffffffULL);
-#else
-    return ((a << 1) >= 0xfff0000000000000ULL);
-#endif
-}
-
-/*----------------------------------------------------------------------------
-| Returns 1 if the double-precision floating-point value `a' is a signaling
-| NaN; otherwise returns 0.
-*----------------------------------------------------------------------------*/
-
-int float64_is_signaling_nan( float64 a_ )
-{
-    uint64_t a = float64_val(a_);
-#if SNAN_BIT_IS_ONE
-    return ((a << 1) >= 0xfff0000000000000ULL);
-#else
-    return
-           ( ( ( a>>51 ) & 0xFFF ) == 0xFFE )
-        && ( a & LIT64( 0x0007FFFFFFFFFFFF ) );
-#endif
-}
-#endif
-
-/*----------------------------------------------------------------------------
-| Returns a quiet NaN if the double-precision floating point value `a' is a
-| signaling NaN; otherwise returns `a'.
-*----------------------------------------------------------------------------*/
-
-float64 float64_maybe_silence_nan( float64 a_ )
-{
-    if (float64_is_signaling_nan(a_)) {
-#if SNAN_BIT_IS_ONE
-#  if defined(TARGET_MIPS) || defined(TARGET_SH4) || defined(TARGET_UNICORE32)
-        return float64_default_nan;
-#  else
-#    error Rules for silencing a signaling NaN are target-specific
-#  endif
-#else
-        uint64_t a = float64_val(a_);
-        a |= LIT64( 0x0008000000000000 );
-        return make_float64(a);
-#endif
-    }
-    return a_;
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of converting the double-precision floating-point NaN
-| `a' to the canonical NaN format.  If `a' is a signaling NaN, the invalid
-| exception is raised.
-*----------------------------------------------------------------------------*/
-
-static commonNaNT float64ToCommonNaN(float64 a, float_status *status)
-{
-    commonNaNT z;
-
-    if (float64_is_signaling_nan(a)) {
-        float_raise(float_flag_invalid, status);
-    }
-    z.sign = float64_val(a)>>63;
-    z.low = 0;
-    z.high = float64_val(a)<<12;
-    return z;
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of converting the canonical NaN `a' to the double-
-| precision floating-point format.
-*----------------------------------------------------------------------------*/
-
-static float64 commonNaNToFloat64(commonNaNT a, float_status *status)
-{
-    uint64_t mantissa = a.high>>12;
-
-    if (status->default_nan_mode) {
-        return float64_default_nan;
-    }
-
-    if ( mantissa )
-        return make_float64(
-              ( ( (uint64_t) a.sign )<<63 )
-            | LIT64( 0x7FF0000000000000 )
-            | ( a.high>>12 ));
-    else
-        return float64_default_nan;
-}
-
-/*----------------------------------------------------------------------------
-| Takes two double-precision floating-point values `a' and `b', one of which
-| is a NaN, and returns the appropriate NaN result.  If either `a' or `b' is a
-| signaling NaN, the invalid exception is raised.
-*----------------------------------------------------------------------------*/
-
-static float64 propagateFloat64NaN(float64 a, float64 b, float_status *status)
-{
-    flag aIsQuietNaN, aIsSignalingNaN, bIsQuietNaN, bIsSignalingNaN;
-    flag aIsLargerSignificand;
-    uint64_t av, bv;
-
-    aIsQuietNaN = float64_is_quiet_nan( a );
-    aIsSignalingNaN = float64_is_signaling_nan( a );
-    bIsQuietNaN = float64_is_quiet_nan( b );
-    bIsSignalingNaN = float64_is_signaling_nan( b );
-    av = float64_val(a);
-    bv = float64_val(b);
-
-    if (aIsSignalingNaN | bIsSignalingNaN) {
-        float_raise(float_flag_invalid, status);
-    }
-
-    if (status->default_nan_mode)
-        return float64_default_nan;
-
-    if ((uint64_t)(av<<1) < (uint64_t)(bv<<1)) {
-        aIsLargerSignificand = 0;
-    } else if ((uint64_t)(bv<<1) < (uint64_t)(av<<1)) {
-        aIsLargerSignificand = 1;
-    } else {
-        aIsLargerSignificand = (av < bv) ? 1 : 0;
-    }
-
-    if (pickNaN(aIsQuietNaN, aIsSignalingNaN, bIsQuietNaN, bIsSignalingNaN,
-                aIsLargerSignificand)) {
-        return float64_maybe_silence_nan(b);
-    } else {
-        return float64_maybe_silence_nan(a);
-    }
-}
-
-/*----------------------------------------------------------------------------
-| Takes three double-precision floating-point values `a', `b' and `c', one of
-| which is a NaN, and returns the appropriate NaN result.  If any of  `a',
-| `b' or `c' is a signaling NaN, the invalid exception is raised.
-| The input infzero indicates whether a*b was 0*inf or inf*0 (in which case
-| obviously c is a NaN, and whether to propagate c or some other NaN is
-| implementation defined).
-*----------------------------------------------------------------------------*/
-
-static float64 propagateFloat64MulAddNaN(float64 a, float64 b,
-                                         float64 c, flag infzero,
-                                         float_status *status)
-{
-    flag aIsQuietNaN, aIsSignalingNaN, bIsQuietNaN, bIsSignalingNaN,
-        cIsQuietNaN, cIsSignalingNaN;
-    int which;
-
-    aIsQuietNaN = float64_is_quiet_nan(a);
-    aIsSignalingNaN = float64_is_signaling_nan(a);
-    bIsQuietNaN = float64_is_quiet_nan(b);
-    bIsSignalingNaN = float64_is_signaling_nan(b);
-    cIsQuietNaN = float64_is_quiet_nan(c);
-    cIsSignalingNaN = float64_is_signaling_nan(c);
-
-    if (aIsSignalingNaN | bIsSignalingNaN | cIsSignalingNaN) {
-        float_raise(float_flag_invalid, status);
-    }
-
-    which = pickNaNMulAdd(aIsQuietNaN, aIsSignalingNaN,
-                          bIsQuietNaN, bIsSignalingNaN,
-                          cIsQuietNaN, cIsSignalingNaN, infzero, status);
-
-    if (status->default_nan_mode) {
-        /* Note that this check is after pickNaNMulAdd so that function
-         * has an opportunity to set the Invalid flag.
-         */
-        return float64_default_nan;
-    }
-
-    switch (which) {
-    case 0:
-        return float64_maybe_silence_nan(a);
-    case 1:
-        return float64_maybe_silence_nan(b);
-    case 2:
-        return float64_maybe_silence_nan(c);
-    case 3:
-    default:
-        return float64_default_nan;
-    }
-}
-
-#ifdef NO_SIGNALING_NANS
-int floatx80_is_quiet_nan(floatx80 a_)
-{
-    return floatx80_is_any_nan(a_);
-}
-
-int floatx80_is_signaling_nan(floatx80 a_)
-{
-    return 0;
-}
-#else
-/*----------------------------------------------------------------------------
-| Returns 1 if the extended double-precision floating-point value `a' is a
-| quiet NaN; otherwise returns 0. This slightly differs from the same
-| function for other types as floatx80 has an explicit bit.
-*----------------------------------------------------------------------------*/
-
-int floatx80_is_quiet_nan( floatx80 a )
-{
-#if SNAN_BIT_IS_ONE
-    uint64_t aLow;
-
-    aLow = a.low & ~0x4000000000000000ULL;
-    return ((a.high & 0x7fff) == 0x7fff)
-        && (aLow << 1)
-        && (a.low == aLow);
-#else
-    return ( ( a.high & 0x7FFF ) == 0x7FFF )
-        && (LIT64( 0x8000000000000000 ) <= ((uint64_t) ( a.low<<1 )));
-#endif
-}
-
-/*----------------------------------------------------------------------------
-| Returns 1 if the extended double-precision floating-point value `a' is a
-| signaling NaN; otherwise returns 0. This slightly differs from the same
-| function for other types as floatx80 has an explicit bit.
-*----------------------------------------------------------------------------*/
-
-int floatx80_is_signaling_nan( floatx80 a )
-{
-#if SNAN_BIT_IS_ONE
-    return ((a.high & 0x7fff) == 0x7fff)
-        && ((a.low << 1) >= 0x8000000000000000ULL);
-#else
-    uint64_t aLow;
-
-    aLow = a.low & ~ LIT64( 0x4000000000000000 );
-    return
-           ( ( a.high & 0x7FFF ) == 0x7FFF )
-        && (uint64_t) ( aLow<<1 )
-        && ( a.low == aLow );
-#endif
-}
-#endif
-
-/*----------------------------------------------------------------------------
-| Returns a quiet NaN if the extended double-precision floating point value
-| `a' is a signaling NaN; otherwise returns `a'.
-*----------------------------------------------------------------------------*/
-
-floatx80 floatx80_maybe_silence_nan( floatx80 a )
-{
-    if (floatx80_is_signaling_nan(a)) {
-#if SNAN_BIT_IS_ONE
-#  if defined(TARGET_MIPS) || defined(TARGET_SH4) || defined(TARGET_UNICORE32)
-        a.low = floatx80_default_nan_low;
-        a.high = floatx80_default_nan_high;
-#  else
-#    error Rules for silencing a signaling NaN are target-specific
-#  endif
-#else
-        a.low |= LIT64( 0xC000000000000000 );
-        return a;
-#endif
-    }
-    return a;
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of converting the extended double-precision floating-
-| point NaN `a' to the canonical NaN format.  If `a' is a signaling NaN, the
-| invalid exception is raised.
-*----------------------------------------------------------------------------*/
-
-static commonNaNT floatx80ToCommonNaN(floatx80 a, float_status *status)
-{
-    commonNaNT z;
-
-    if (floatx80_is_signaling_nan(a)) {
-        float_raise(float_flag_invalid, status);
-    }
-    if ( a.low >> 63 ) {
-        z.sign = a.high >> 15;
-        z.low = 0;
-        z.high = a.low << 1;
-    } else {
-        z.sign = floatx80_default_nan_high >> 15;
-        z.low = 0;
-        z.high = floatx80_default_nan_low << 1;
-    }
-    return z;
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of converting the canonical NaN `a' to the extended
-| double-precision floating-point format.
-*----------------------------------------------------------------------------*/
-
-static floatx80 commonNaNToFloatx80(commonNaNT a, float_status *status)
-{
-    floatx80 z;
-
-    if (status->default_nan_mode) {
-        z.low = floatx80_default_nan_low;
-        z.high = floatx80_default_nan_high;
-        return z;
-    }
-
-    if (a.high >> 1) {
-        z.low = LIT64( 0x8000000000000000 ) | a.high >> 1;
-        z.high = ( ( (uint16_t) a.sign )<<15 ) | 0x7FFF;
-    } else {
-        z.low = floatx80_default_nan_low;
-        z.high = floatx80_default_nan_high;
-    }
-
-    return z;
-}
-
-/*----------------------------------------------------------------------------
-| Takes two extended double-precision floating-point values `a' and `b', one
-| of which is a NaN, and returns the appropriate NaN result.  If either `a' or
-| `b' is a signaling NaN, the invalid exception is raised.
-*----------------------------------------------------------------------------*/
-
-static floatx80 propagateFloatx80NaN(floatx80 a, floatx80 b,
-                                     float_status *status)
-{
-    flag aIsQuietNaN, aIsSignalingNaN, bIsQuietNaN, bIsSignalingNaN;
-    flag aIsLargerSignificand;
-
-    aIsQuietNaN = floatx80_is_quiet_nan( a );
-    aIsSignalingNaN = floatx80_is_signaling_nan( a );
-    bIsQuietNaN = floatx80_is_quiet_nan( b );
-    bIsSignalingNaN = floatx80_is_signaling_nan( b );
-
-    if (aIsSignalingNaN | bIsSignalingNaN) {
-        float_raise(float_flag_invalid, status);
-    }
-
-    if (status->default_nan_mode) {
-        a.low = floatx80_default_nan_low;
-        a.high = floatx80_default_nan_high;
-        return a;
-    }
-
-    if (a.low < b.low) {
-        aIsLargerSignificand = 0;
-    } else if (b.low < a.low) {
-        aIsLargerSignificand = 1;
-    } else {
-        aIsLargerSignificand = (a.high < b.high) ? 1 : 0;
-    }
-
-    if (pickNaN(aIsQuietNaN, aIsSignalingNaN, bIsQuietNaN, bIsSignalingNaN,
-                aIsLargerSignificand)) {
-        return floatx80_maybe_silence_nan(b);
-    } else {
-        return floatx80_maybe_silence_nan(a);
-    }
-}
-
-#ifdef NO_SIGNALING_NANS
-int float128_is_quiet_nan(float128 a_)
-{
-    return float128_is_any_nan(a_);
-}
-
-int float128_is_signaling_nan(float128 a_)
-{
-    return 0;
-}
-#else
-/*----------------------------------------------------------------------------
-| Returns 1 if the quadruple-precision floating-point value `a' is a quiet
-| NaN; otherwise returns 0.
-*----------------------------------------------------------------------------*/
-
-int float128_is_quiet_nan( float128 a )
-{
-#if SNAN_BIT_IS_ONE
-    return (((a.high >> 47) & 0xffff) == 0xfffe)
-        && (a.low || (a.high & 0x00007fffffffffffULL));
-#else
-    return
-        ((a.high << 1) >= 0xffff000000000000ULL)
-        && (a.low || (a.high & 0x0000ffffffffffffULL));
-#endif
-}
-
-/*----------------------------------------------------------------------------
-| Returns 1 if the quadruple-precision floating-point value `a' is a
-| signaling NaN; otherwise returns 0.
-*----------------------------------------------------------------------------*/
-
-int float128_is_signaling_nan( float128 a )
-{
-#if SNAN_BIT_IS_ONE
-    return
-        ((a.high << 1) >= 0xffff000000000000ULL)
-        && (a.low || (a.high & 0x0000ffffffffffffULL));
-#else
-    return
-           ( ( ( a.high>>47 ) & 0xFFFF ) == 0xFFFE )
-        && ( a.low || ( a.high & LIT64( 0x00007FFFFFFFFFFF ) ) );
-#endif
-}
-#endif
-
-/*----------------------------------------------------------------------------
-| Returns a quiet NaN if the quadruple-precision floating point value `a' is
-| a signaling NaN; otherwise returns `a'.
-*----------------------------------------------------------------------------*/
-
-float128 float128_maybe_silence_nan( float128 a )
-{
-    if (float128_is_signaling_nan(a)) {
-#if SNAN_BIT_IS_ONE
-#  if defined(TARGET_MIPS) || defined(TARGET_SH4) || defined(TARGET_UNICORE32)
-        a.low = float128_default_nan_low;
-        a.high = float128_default_nan_high;
-#  else
-#    error Rules for silencing a signaling NaN are target-specific
-#  endif
-#else
-        a.high |= LIT64( 0x0000800000000000 );
-        return a;
-#endif
-    }
-    return a;
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of converting the quadruple-precision floating-point NaN
-| `a' to the canonical NaN format.  If `a' is a signaling NaN, the invalid
-| exception is raised.
-*----------------------------------------------------------------------------*/
-
-static commonNaNT float128ToCommonNaN(float128 a, float_status *status)
-{
-    commonNaNT z;
-
-    if (float128_is_signaling_nan(a)) {
-        float_raise(float_flag_invalid, status);
-    }
-    z.sign = a.high>>63;
-    shortShift128Left( a.high, a.low, 16, &z.high, &z.low );
-    return z;
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of converting the canonical NaN `a' to the quadruple-
-| precision floating-point format.
-*----------------------------------------------------------------------------*/
-
-static float128 commonNaNToFloat128(commonNaNT a, float_status *status)
-{
-    float128 z;
-
-    if (status->default_nan_mode) {
-        z.low = float128_default_nan_low;
-        z.high = float128_default_nan_high;
-        return z;
-    }
-
-    shift128Right( a.high, a.low, 16, &z.high, &z.low );
-    z.high |= ( ( (uint64_t) a.sign )<<63 ) | LIT64( 0x7FFF000000000000 );
-    return z;
-}
-
-/*----------------------------------------------------------------------------
-| Takes two quadruple-precision floating-point values `a' and `b', one of
-| which is a NaN, and returns the appropriate NaN result.  If either `a' or
-| `b' is a signaling NaN, the invalid exception is raised.
-*----------------------------------------------------------------------------*/
-
-static float128 propagateFloat128NaN(float128 a, float128 b,
-                                     float_status *status)
-{
-    flag aIsQuietNaN, aIsSignalingNaN, bIsQuietNaN, bIsSignalingNaN;
-    flag aIsLargerSignificand;
-
-    aIsQuietNaN = float128_is_quiet_nan( a );
-    aIsSignalingNaN = float128_is_signaling_nan( a );
-    bIsQuietNaN = float128_is_quiet_nan( b );
-    bIsSignalingNaN = float128_is_signaling_nan( b );
-
-    if (aIsSignalingNaN | bIsSignalingNaN) {
-        float_raise(float_flag_invalid, status);
-    }
-
-    if (status->default_nan_mode) {
-        a.low = float128_default_nan_low;
-        a.high = float128_default_nan_high;
-        return a;
-    }
-
-    if (lt128(a.high<<1, a.low, b.high<<1, b.low)) {
-        aIsLargerSignificand = 0;
-    } else if (lt128(b.high<<1, b.low, a.high<<1, a.low)) {
-        aIsLargerSignificand = 1;
-    } else {
-        aIsLargerSignificand = (a.high < b.high) ? 1 : 0;
-    }
-
-    if (pickNaN(aIsQuietNaN, aIsSignalingNaN, bIsQuietNaN, bIsSignalingNaN,
-                aIsLargerSignificand)) {
-        return float128_maybe_silence_nan(b);
-    } else {
-        return float128_maybe_silence_nan(a);
-    }
-}
-
diff --git a/qemu/fpu/softfloat.c b/qemu/fpu/softfloat.c
deleted file mode 100644
index 166c48e43..000000000
--- a/qemu/fpu/softfloat.c
+++ /dev/null
@@ -1,7733 +0,0 @@
-/*
- * QEMU float support
- *
- * The code in this source file is derived from release 2a of the SoftFloat
- * IEC/IEEE Floating-point Arithmetic Package. Those parts of the code (and
- * some later contributions) are provided under that license, as detailed below.
- * It has subsequently been modified by contributors to the QEMU Project,
- * so some portions are provided under:
- *  the SoftFloat-2a license
- *  the BSD license
- *  GPL-v2-or-later
- *
- * Any future contributions to this file after December 1st 2014 will be
- * taken to be licensed under the Softfloat-2a license unless specifically
- * indicated otherwise.
- */
-
-/*
-===============================================================================
-This C source file is part of the SoftFloat IEC/IEEE Floating-point
-Arithmetic Package, Release 2a.
-
-Written by John R. Hauser.  This work was made possible in part by the
-International Computer Science Institute, located at Suite 600, 1947 Center
-Street, Berkeley, California 94704.  Funding was partially provided by the
-National Science Foundation under grant MIP-9311980.  The original version
-of this code was written as part of a project to build a fixed-point vector
-processor in collaboration with the University of California at Berkeley,
-overseen by Profs. Nelson Morgan and John Wawrzynek.  More information
-is available through the Web page `http://HTTP.CS.Berkeley.EDU/~jhauser/
-arithmetic/SoftFloat.html'.
-
-THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE.  Although reasonable effort
-has been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT
-TIMES RESULT IN INCORRECT BEHAVIOR.  USE OF THIS SOFTWARE IS RESTRICTED TO
-PERSONS AND ORGANIZATIONS WHO CAN AND WILL TAKE FULL RESPONSIBILITY FOR ANY
-AND ALL LOSSES, COSTS, OR OTHER PROBLEMS ARISING FROM ITS USE.
-
-Derivative works are acceptable, even for commercial purposes, so long as
-(1) they include prominent notice that the work is derivative, and (2) they
-include prominent notice akin to these four paragraphs for those parts of
-this code that are retained.
-
-===============================================================================
-*/
-
-/* BSD licensing:
- * Copyright (c) 2006, Fabrice Bellard
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- *
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- *
- * 3. Neither the name of the copyright holder nor the names of its contributors
- * may be used to endorse or promote products derived from this software without
- * specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
- * THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/* Portions of this work are licensed under the terms of the GNU GPL,
- * version 2 or later. See the COPYING file in the top-level directory.
- */
-
-/* softfloat (and in particular the code in softfloat-specialize.h) is
- * target-dependent and needs the TARGET_* macros.
- */
-#include "qemu/osdep.h"
-
-#include "fpu/softfloat.h"
-
-/* We only need stdlib for abort() */
-
-/*----------------------------------------------------------------------------
-| Primitive arithmetic functions, including multi-word arithmetic, and
-| division and square root approximations.  (Can be specialized to target if
-| desired.)
-*----------------------------------------------------------------------------*/
-#include "softfloat-macros.h"
-
-/*----------------------------------------------------------------------------
-| Functions and definitions to determine:  (1) whether tininess for underflow
-| is detected before or after rounding by default, (2) what (if anything)
-| happens when exceptions are raised, (3) how signaling NaNs are distinguished
-| from quiet NaNs, (4) the default generated quiet NaNs, and (5) how NaNs
-| are propagated from function inputs to output.  These details are target-
-| specific.
-*----------------------------------------------------------------------------*/
-#include "softfloat-specialize.h"
-
-/*----------------------------------------------------------------------------
-| Returns the fraction bits of the half-precision floating-point value `a'.
-*----------------------------------------------------------------------------*/
-
-static inline uint32_t extractFloat16Frac(float16 a)
-{
-    return float16_val(a) & 0x3ff;
-}
-
-/*----------------------------------------------------------------------------
-| Returns the exponent bits of the half-precision floating-point value `a'.
-*----------------------------------------------------------------------------*/
-
-static inline int extractFloat16Exp(float16 a)
-{
-    return (float16_val(a) >> 10) & 0x1f;
-}
-
-/*----------------------------------------------------------------------------
-| Returns the sign bit of the single-precision floating-point value `a'.
-*----------------------------------------------------------------------------*/
-
-static inline flag extractFloat16Sign(float16 a)
-{
-    return float16_val(a)>>15;
-}
-
-/*----------------------------------------------------------------------------
-| Takes a 64-bit fixed-point value `absZ' with binary point between bits 6
-| and 7, and returns the properly rounded 32-bit integer corresponding to the
-| input.  If `zSign' is 1, the input is negated before being converted to an
-| integer.  Bit 63 of `absZ' must be zero.  Ordinarily, the fixed-point input
-| is simply rounded to an integer, with the inexact exception raised if the
-| input cannot be represented exactly as an integer.  However, if the fixed-
-| point input is too large, the invalid exception is raised and the largest
-| positive or negative integer is returned.
-*----------------------------------------------------------------------------*/
-
-static int32_t roundAndPackInt32(flag zSign, uint64_t absZ, float_status *status)
-{
-    int8_t roundingMode;
-    flag roundNearestEven;
-    int8_t roundIncrement, roundBits;
-    int32_t z;
-
-    roundingMode = status->float_rounding_mode;
-    roundNearestEven = ( roundingMode == float_round_nearest_even );
-    switch (roundingMode) {
-    case float_round_nearest_even:
-    case float_round_ties_away:
-        roundIncrement = 0x40;
-        break;
-    case float_round_to_zero:
-        roundIncrement = 0;
-        break;
-    case float_round_up:
-        roundIncrement = zSign ? 0 : 0x7f;
-        break;
-    case float_round_down:
-        roundIncrement = zSign ? 0x7f : 0;
-        break;
-    default:
-        abort();
-    }
-    roundBits = absZ & 0x7F;
-    absZ = ( absZ + roundIncrement )>>7;
-    absZ &= ~ ( ( ( roundBits ^ 0x40 ) == 0 ) & roundNearestEven );
-    z = absZ;
-    if ( zSign ) z = - z;
-    if ( ( absZ>>32 ) || ( z && ( ( z < 0 ) ^ zSign ) ) ) {
-        float_raise(float_flag_invalid, status);
-        return zSign ? (int32_t) 0x80000000 : 0x7FFFFFFF;
-    }
-    if (roundBits) {
-        status->float_exception_flags |= float_flag_inexact;
-    }
-    return z;
-
-}
-
-/*----------------------------------------------------------------------------
-| Takes the 128-bit fixed-point value formed by concatenating `absZ0' and
-| `absZ1', with binary point between bits 63 and 64 (between the input words),
-| and returns the properly rounded 64-bit integer corresponding to the input.
-| If `zSign' is 1, the input is negated before being converted to an integer.
-| Ordinarily, the fixed-point input is simply rounded to an integer, with
-| the inexact exception raised if the input cannot be represented exactly as
-| an integer.  However, if the fixed-point input is too large, the invalid
-| exception is raised and the largest positive or negative integer is
-| returned.
-*----------------------------------------------------------------------------*/
-
-static int64_t roundAndPackInt64(flag zSign, uint64_t absZ0, uint64_t absZ1,
-                               float_status *status)
-{
-    int8_t roundingMode;
-    flag roundNearestEven, increment;
-    int64_t z;
-
-    roundingMode = status->float_rounding_mode;
-    roundNearestEven = ( roundingMode == float_round_nearest_even );
-    switch (roundingMode) {
-    case float_round_nearest_even:
-    case float_round_ties_away:
-        increment = ((int64_t) absZ1 < 0);
-        break;
-    case float_round_to_zero:
-        increment = 0;
-        break;
-    case float_round_up:
-        increment = !zSign && absZ1;
-        break;
-    case float_round_down:
-        increment = zSign && absZ1;
-        break;
-    default:
-        abort();
-    }
-    if ( increment ) {
-        ++absZ0;
-        if ( absZ0 == 0 ) goto overflow;
-        absZ0 &= ~ ( ( (uint64_t) ( absZ1<<1 ) == 0 ) & roundNearestEven );
-    }
-    z = absZ0;
-    if ( zSign ) z = - z;
-    if ( z && ( ( z < 0 ) ^ zSign ) ) {
- overflow:
-        float_raise(float_flag_invalid, status);
-        return
-              zSign ? (int64_t) LIT64( 0x8000000000000000 )
-            : LIT64( 0x7FFFFFFFFFFFFFFF );
-    }
-    if (absZ1) {
-        status->float_exception_flags |= float_flag_inexact;
-    }
-    return z;
-
-}
-
-/*----------------------------------------------------------------------------
-| Takes the 128-bit fixed-point value formed by concatenating `absZ0' and
-| `absZ1', with binary point between bits 63 and 64 (between the input words),
-| and returns the properly rounded 64-bit unsigned integer corresponding to the
-| input.  Ordinarily, the fixed-point input is simply rounded to an integer,
-| with the inexact exception raised if the input cannot be represented exactly
-| as an integer.  However, if the fixed-point input is too large, the invalid
-| exception is raised and the largest unsigned integer is returned.
-*----------------------------------------------------------------------------*/
-
-static int64_t roundAndPackUint64(flag zSign, uint64_t absZ0,
-                                uint64_t absZ1, float_status *status)
-{
-    int8_t roundingMode;
-    flag roundNearestEven, increment;
-
-    roundingMode = status->float_rounding_mode;
-    roundNearestEven = (roundingMode == float_round_nearest_even);
-    switch (roundingMode) {
-    case float_round_nearest_even:
-    case float_round_ties_away:
-        increment = ((int64_t)absZ1 < 0);
-        break;
-    case float_round_to_zero:
-        increment = 0;
-        break;
-    case float_round_up:
-        increment = !zSign && absZ1;
-        break;
-    case float_round_down:
-        increment = zSign && absZ1;
-        break;
-    default:
-        abort();
-    }
-    if (increment) {
-        ++absZ0;
-        if (absZ0 == 0) {
-            float_raise(float_flag_invalid, status);
-            return LIT64(0xFFFFFFFFFFFFFFFF);
-        }
-        absZ0 &= ~(((uint64_t)(absZ1<<1) == 0) & roundNearestEven);
-    }
-
-    if (zSign && absZ0) {
-        float_raise(float_flag_invalid, status);
-        return 0;
-    }
-
-    if (absZ1) {
-        status->float_exception_flags |= float_flag_inexact;
-    }
-    return absZ0;
-}
-
-/*----------------------------------------------------------------------------
-| Returns the fraction bits of the single-precision floating-point value `a'.
-*----------------------------------------------------------------------------*/
-
-static inline uint32_t extractFloat32Frac( float32 a )
-{
-
-    return float32_val(a) & 0x007FFFFF;
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the exponent bits of the single-precision floating-point value `a'.
-*----------------------------------------------------------------------------*/
-
-static inline int extractFloat32Exp(float32 a)
-{
-
-    return ( float32_val(a)>>23 ) & 0xFF;
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the sign bit of the single-precision floating-point value `a'.
-*----------------------------------------------------------------------------*/
-
-static inline flag extractFloat32Sign( float32 a )
-{
-
-    return float32_val(a)>>31;
-
-}
-
-/*----------------------------------------------------------------------------
-| If `a' is denormal and we are in flush-to-zero mode then set the
-| input-denormal exception and return zero. Otherwise just return the value.
-*----------------------------------------------------------------------------*/
-float32 float32_squash_input_denormal(float32 a, float_status *status)
-{
-    if (status->flush_inputs_to_zero) {
-        if (extractFloat32Exp(a) == 0 && extractFloat32Frac(a) != 0) {
-            float_raise(float_flag_input_denormal, status);
-            return make_float32(float32_val(a) & 0x80000000);
-        }
-    }
-    return a;
-}
-
-/*----------------------------------------------------------------------------
-| Normalizes the subnormal single-precision floating-point value represented
-| by the denormalized significand `aSig'.  The normalized exponent and
-| significand are stored at the locations pointed to by `zExpPtr' and
-| `zSigPtr', respectively.
-*----------------------------------------------------------------------------*/
-
-static void
- normalizeFloat32Subnormal(uint32_t aSig, int *zExpPtr, uint32_t *zSigPtr)
-{
-    int8_t shiftCount;
-
-    shiftCount = countLeadingZeros32( aSig ) - 8;
-    *zSigPtr = aSig<<shiftCount;
-    *zExpPtr = 1 - shiftCount;
-
-}
-
-/*----------------------------------------------------------------------------
-| Packs the sign `zSign', exponent `zExp', and significand `zSig' into a
-| single-precision floating-point value, returning the result.  After being
-| shifted into the proper positions, the three fields are simply added
-| together to form the result.  This means that any integer portion of `zSig'
-| will be added into the exponent.  Since a properly normalized significand
-| will have an integer portion equal to 1, the `zExp' input should be 1 less
-| than the desired result exponent whenever `zSig' is a complete, normalized
-| significand.
-*----------------------------------------------------------------------------*/
-
-static inline float32 packFloat32(flag zSign, int zExp, uint32_t zSig)
-{
-
-    return make_float32(
-          ( ( (uint32_t) zSign )<<31 ) + ( ( (uint32_t) zExp )<<23 ) + zSig);
-
-}
-
-/*----------------------------------------------------------------------------
-| Takes an abstract floating-point value having sign `zSign', exponent `zExp',
-| and significand `zSig', and returns the proper single-precision floating-
-| point value corresponding to the abstract input.  Ordinarily, the abstract
-| value is simply rounded and packed into the single-precision format, with
-| the inexact exception raised if the abstract input cannot be represented
-| exactly.  However, if the abstract value is too large, the overflow and
-| inexact exceptions are raised and an infinity or maximal finite value is
-| returned.  If the abstract value is too small, the input value is rounded to
-| a subnormal number, and the underflow and inexact exceptions are raised if
-| the abstract input cannot be represented exactly as a subnormal single-
-| precision floating-point number.
-|     The input significand `zSig' has its binary point between bits 30
-| and 29, which is 7 bits to the left of the usual location.  This shifted
-| significand must be normalized or smaller.  If `zSig' is not normalized,
-| `zExp' must be 0; in that case, the result returned is a subnormal number,
-| and it must not require rounding.  In the usual case that `zSig' is
-| normalized, `zExp' must be 1 less than the ``true'' floating-point exponent.
-| The handling of underflow and overflow follows the IEC/IEEE Standard for
-| Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-static float32 roundAndPackFloat32(flag zSign, int zExp, uint32_t zSig,
-                                   float_status *status)
-{
-    int8_t roundingMode;
-    flag roundNearestEven;
-    int8_t roundIncrement, roundBits;
-    flag isTiny;
-
-    roundingMode = status->float_rounding_mode;
-    roundNearestEven = ( roundingMode == float_round_nearest_even );
-    switch (roundingMode) {
-    case float_round_nearest_even:
-    case float_round_ties_away:
-        roundIncrement = 0x40;
-        break;
-    case float_round_to_zero:
-        roundIncrement = 0;
-        break;
-    case float_round_up:
-        roundIncrement = zSign ? 0 : 0x7f;
-        break;
-    case float_round_down:
-        roundIncrement = zSign ? 0x7f : 0;
-        break;
-    default:
-        abort();
-        break;
-    }
-    roundBits = zSig & 0x7F;
-    if ( 0xFD <= (uint16_t) zExp ) {
-        if (    ( 0xFD < zExp )
-             || (    ( zExp == 0xFD )
-                  && ( (int32_t) ( zSig + roundIncrement ) < 0 ) )
-           ) {
-            float_raise(float_flag_overflow | float_flag_inexact, status);
-            return packFloat32( zSign, 0xFF, - ( roundIncrement == 0 ));
-        }
-        if ( zExp < 0 ) {
-            if (status->flush_to_zero) {
-                float_raise(float_flag_output_denormal, status);
-                return packFloat32(zSign, 0, 0);
-            }
-            isTiny =
-                (status->float_detect_tininess
-                 == float_tininess_before_rounding)
-                || ( zExp < -1 )
-                || ( zSig + roundIncrement < 0x80000000 );
-            shift32RightJamming( zSig, - zExp, &zSig );
-            zExp = 0;
-            roundBits = zSig & 0x7F;
-            if (isTiny && roundBits) {
-                float_raise(float_flag_underflow, status);
-            }
-        }
-    }
-    if (roundBits) {
-        status->float_exception_flags |= float_flag_inexact;
-    }
-    zSig = ( zSig + roundIncrement )>>7;
-    zSig &= ~ ( ( ( roundBits ^ 0x40 ) == 0 ) & roundNearestEven );
-    if ( zSig == 0 ) zExp = 0;
-    return packFloat32( zSign, zExp, zSig );
-
-}
-
-/*----------------------------------------------------------------------------
-| Takes an abstract floating-point value having sign `zSign', exponent `zExp',
-| and significand `zSig', and returns the proper single-precision floating-
-| point value corresponding to the abstract input.  This routine is just like
-| `roundAndPackFloat32' except that `zSig' does not have to be normalized.
-| Bit 31 of `zSig' must be zero, and `zExp' must be 1 less than the ``true''
-| floating-point exponent.
-*----------------------------------------------------------------------------*/
-
-static float32
- normalizeRoundAndPackFloat32(flag zSign, int zExp, uint32_t zSig,
-                              float_status *status)
-{
-    int8_t shiftCount;
-
-    shiftCount = countLeadingZeros32( zSig ) - 1;
-    return roundAndPackFloat32(zSign, zExp - shiftCount, zSig<<shiftCount,
-                               status);
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the fraction bits of the double-precision floating-point value `a'.
-*----------------------------------------------------------------------------*/
-
-static inline uint64_t extractFloat64Frac( float64 a )
-{
-
-    return float64_val(a) & LIT64( 0x000FFFFFFFFFFFFF );
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the exponent bits of the double-precision floating-point value `a'.
-*----------------------------------------------------------------------------*/
-
-static inline int extractFloat64Exp(float64 a)
-{
-
-    return ( float64_val(a)>>52 ) & 0x7FF;
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the sign bit of the double-precision floating-point value `a'.
-*----------------------------------------------------------------------------*/
-
-static inline flag extractFloat64Sign( float64 a )
-{
-
-    return float64_val(a)>>63;
-
-}
-
-/*----------------------------------------------------------------------------
-| If `a' is denormal and we are in flush-to-zero mode then set the
-| input-denormal exception and return zero. Otherwise just return the value.
-*----------------------------------------------------------------------------*/
-float64 float64_squash_input_denormal(float64 a, float_status *status)
-{
-    if (status->flush_inputs_to_zero) {
-        if (extractFloat64Exp(a) == 0 && extractFloat64Frac(a) != 0) {
-            float_raise(float_flag_input_denormal, status);
-            return make_float64(float64_val(a) & (1ULL << 63));
-        }
-    }
-    return a;
-}
-
-/*----------------------------------------------------------------------------
-| Normalizes the subnormal double-precision floating-point value represented
-| by the denormalized significand `aSig'.  The normalized exponent and
-| significand are stored at the locations pointed to by `zExpPtr' and
-| `zSigPtr', respectively.
-*----------------------------------------------------------------------------*/
-
-static void
- normalizeFloat64Subnormal(uint64_t aSig, int *zExpPtr, uint64_t *zSigPtr)
-{
-    int8_t shiftCount;
-
-    shiftCount = countLeadingZeros64( aSig ) - 11;
-    *zSigPtr = aSig<<shiftCount;
-    *zExpPtr = 1 - shiftCount;
-
-}
-
-/*----------------------------------------------------------------------------
-| Packs the sign `zSign', exponent `zExp', and significand `zSig' into a
-| double-precision floating-point value, returning the result.  After being
-| shifted into the proper positions, the three fields are simply added
-| together to form the result.  This means that any integer portion of `zSig'
-| will be added into the exponent.  Since a properly normalized significand
-| will have an integer portion equal to 1, the `zExp' input should be 1 less
-| than the desired result exponent whenever `zSig' is a complete, normalized
-| significand.
-*----------------------------------------------------------------------------*/
-
-static inline float64 packFloat64(flag zSign, int zExp, uint64_t zSig)
-{
-
-    return make_float64(
-        ( ( (uint64_t) zSign )<<63 ) + ( ( (uint64_t) zExp )<<52 ) + zSig);
-
-}
-
-/*----------------------------------------------------------------------------
-| Takes an abstract floating-point value having sign `zSign', exponent `zExp',
-| and significand `zSig', and returns the proper double-precision floating-
-| point value corresponding to the abstract input.  Ordinarily, the abstract
-| value is simply rounded and packed into the double-precision format, with
-| the inexact exception raised if the abstract input cannot be represented
-| exactly.  However, if the abstract value is too large, the overflow and
-| inexact exceptions are raised and an infinity or maximal finite value is
-| returned.  If the abstract value is too small, the input value is rounded to
-| a subnormal number, and the underflow and inexact exceptions are raised if
-| the abstract input cannot be represented exactly as a subnormal double-
-| precision floating-point number.
-|     The input significand `zSig' has its binary point between bits 62
-| and 61, which is 10 bits to the left of the usual location.  This shifted
-| significand must be normalized or smaller.  If `zSig' is not normalized,
-| `zExp' must be 0; in that case, the result returned is a subnormal number,
-| and it must not require rounding.  In the usual case that `zSig' is
-| normalized, `zExp' must be 1 less than the ``true'' floating-point exponent.
-| The handling of underflow and overflow follows the IEC/IEEE Standard for
-| Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-static float64 roundAndPackFloat64(flag zSign, int zExp, uint64_t zSig,
-                                   float_status *status)
-{
-    int8_t roundingMode;
-    flag roundNearestEven;
-    int roundIncrement, roundBits;
-    flag isTiny;
-
-    roundingMode = status->float_rounding_mode;
-    roundNearestEven = ( roundingMode == float_round_nearest_even );
-    switch (roundingMode) {
-    case float_round_nearest_even:
-    case float_round_ties_away:
-        roundIncrement = 0x200;
-        break;
-    case float_round_to_zero:
-        roundIncrement = 0;
-        break;
-    case float_round_up:
-        roundIncrement = zSign ? 0 : 0x3ff;
-        break;
-    case float_round_down:
-        roundIncrement = zSign ? 0x3ff : 0;
-        break;
-    default:
-        abort();
-    }
-    roundBits = zSig & 0x3FF;
-    if ( 0x7FD <= (uint16_t) zExp ) {
-        if (    ( 0x7FD < zExp )
-             || (    ( zExp == 0x7FD )
-                  && ( (int64_t) ( zSig + roundIncrement ) < 0 ) )
-           ) {
-            float_raise(float_flag_overflow | float_flag_inexact, status);
-            return packFloat64( zSign, 0x7FF, - ( roundIncrement == 0 ));
-        }
-        if ( zExp < 0 ) {
-            if (status->flush_to_zero) {
-                float_raise(float_flag_output_denormal, status);
-                return packFloat64(zSign, 0, 0);
-            }
-            isTiny =
-                   (status->float_detect_tininess
-                    == float_tininess_before_rounding)
-                || ( zExp < -1 )
-                || ( zSig + roundIncrement < LIT64( 0x8000000000000000 ) );
-            shift64RightJamming( zSig, - zExp, &zSig );
-            zExp = 0;
-            roundBits = zSig & 0x3FF;
-            if (isTiny && roundBits) {
-                float_raise(float_flag_underflow, status);
-            }
-        }
-    }
-    if (roundBits) {
-        status->float_exception_flags |= float_flag_inexact;
-    }
-    zSig = ( zSig + roundIncrement )>>10;
-    zSig &= ~ ( ( ( roundBits ^ 0x200 ) == 0 ) & roundNearestEven );
-    if ( zSig == 0 ) zExp = 0;
-    return packFloat64( zSign, zExp, zSig );
-
-}
-
-/*----------------------------------------------------------------------------
-| Takes an abstract floating-point value having sign `zSign', exponent `zExp',
-| and significand `zSig', and returns the proper double-precision floating-
-| point value corresponding to the abstract input.  This routine is just like
-| `roundAndPackFloat64' except that `zSig' does not have to be normalized.
-| Bit 63 of `zSig' must be zero, and `zExp' must be 1 less than the ``true''
-| floating-point exponent.
-*----------------------------------------------------------------------------*/
-
-static float64
- normalizeRoundAndPackFloat64(flag zSign, int zExp, uint64_t zSig,
-                              float_status *status)
-{
-    int8_t shiftCount;
-
-    shiftCount = countLeadingZeros64( zSig ) - 1;
-    return roundAndPackFloat64(zSign, zExp - shiftCount, zSig<<shiftCount,
-                               status);
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the fraction bits of the extended double-precision floating-point
-| value `a'.
-*----------------------------------------------------------------------------*/
-
-static inline uint64_t extractFloatx80Frac( floatx80 a )
-{
-
-    return a.low;
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the exponent bits of the extended double-precision floating-point
-| value `a'.
-*----------------------------------------------------------------------------*/
-
-static inline int32_t extractFloatx80Exp( floatx80 a )
-{
-
-    return a.high & 0x7FFF;
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the sign bit of the extended double-precision floating-point value
-| `a'.
-*----------------------------------------------------------------------------*/
-
-static inline flag extractFloatx80Sign( floatx80 a )
-{
-
-    return a.high>>15;
-
-}
-
-/*----------------------------------------------------------------------------
-| Normalizes the subnormal extended double-precision floating-point value
-| represented by the denormalized significand `aSig'.  The normalized exponent
-| and significand are stored at the locations pointed to by `zExpPtr' and
-| `zSigPtr', respectively.
-*----------------------------------------------------------------------------*/
-
-static void
- normalizeFloatx80Subnormal( uint64_t aSig, int32_t *zExpPtr, uint64_t *zSigPtr )
-{
-    int8_t shiftCount;
-
-    shiftCount = countLeadingZeros64( aSig );
-    *zSigPtr = aSig<<shiftCount;
-    *zExpPtr = 1 - shiftCount;
-
-}
-
-/*----------------------------------------------------------------------------
-| Packs the sign `zSign', exponent `zExp', and significand `zSig' into an
-| extended double-precision floating-point value, returning the result.
-*----------------------------------------------------------------------------*/
-
-static inline floatx80 packFloatx80( flag zSign, int32_t zExp, uint64_t zSig )
-{
-    floatx80 z;
-
-    z.low = zSig;
-    z.high = ( ( (uint16_t) zSign )<<15 ) + zExp;
-    return z;
-
-}
-
-/*----------------------------------------------------------------------------
-| Takes an abstract floating-point value having sign `zSign', exponent `zExp',
-| and extended significand formed by the concatenation of `zSig0' and `zSig1',
-| and returns the proper extended double-precision floating-point value
-| corresponding to the abstract input.  Ordinarily, the abstract value is
-| rounded and packed into the extended double-precision format, with the
-| inexact exception raised if the abstract input cannot be represented
-| exactly.  However, if the abstract value is too large, the overflow and
-| inexact exceptions are raised and an infinity or maximal finite value is
-| returned.  If the abstract value is too small, the input value is rounded to
-| a subnormal number, and the underflow and inexact exceptions are raised if
-| the abstract input cannot be represented exactly as a subnormal extended
-| double-precision floating-point number.
-|     If `roundingPrecision' is 32 or 64, the result is rounded to the same
-| number of bits as single or double precision, respectively.  Otherwise, the
-| result is rounded to the full precision of the extended double-precision
-| format.
-|     The input significand must be normalized or smaller.  If the input
-| significand is not normalized, `zExp' must be 0; in that case, the result
-| returned is a subnormal number, and it must not require rounding.  The
-| handling of underflow and overflow follows the IEC/IEEE Standard for Binary
-| Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-static floatx80 roundAndPackFloatx80(int8_t roundingPrecision, flag zSign,
-                                     int32_t zExp, uint64_t zSig0, uint64_t zSig1,
-                                     float_status *status)
-{
-    int8_t roundingMode;
-    flag roundNearestEven, increment, isTiny;
-    int64_t roundIncrement, roundMask, roundBits;
-
-    roundingMode = status->float_rounding_mode;
-    roundNearestEven = ( roundingMode == float_round_nearest_even );
-    if ( roundingPrecision == 80 ) goto precision80;
-    if ( roundingPrecision == 64 ) {
-        roundIncrement = LIT64( 0x0000000000000400 );
-        roundMask = LIT64( 0x00000000000007FF );
-    }
-    else if ( roundingPrecision == 32 ) {
-        roundIncrement = LIT64( 0x0000008000000000 );
-        roundMask = LIT64( 0x000000FFFFFFFFFF );
-    }
-    else {
-        goto precision80;
-    }
-    zSig0 |= ( zSig1 != 0 );
-    switch (roundingMode) {
-    case float_round_nearest_even:
-    case float_round_ties_away:
-        break;
-    case float_round_to_zero:
-        roundIncrement = 0;
-        break;
-    case float_round_up:
-        roundIncrement = zSign ? 0 : roundMask;
-        break;
-    case float_round_down:
-        roundIncrement = zSign ? roundMask : 0;
-        break;
-    default:
-        abort();
-    }
-    roundBits = zSig0 & roundMask;
-    if ( 0x7FFD <= (uint32_t) ( zExp - 1 ) ) {
-        if (    ( 0x7FFE < zExp )
-             || ( ( zExp == 0x7FFE ) && ( zSig0 + roundIncrement < zSig0 ) )
-           ) {
-            goto overflow;
-        }
-        if ( zExp <= 0 ) {
-            if (status->flush_to_zero) {
-                float_raise(float_flag_output_denormal, status);
-                return packFloatx80(zSign, 0, 0);
-            }
-            isTiny =
-                   (status->float_detect_tininess
-                    == float_tininess_before_rounding)
-                || ( zExp < 0 )
-                || ( zSig0 <= zSig0 + roundIncrement );
-            shift64RightJamming( zSig0, 1 - zExp, &zSig0 );
-            zExp = 0;
-            roundBits = zSig0 & roundMask;
-            if (isTiny && roundBits) {
-                float_raise(float_flag_underflow, status);
-            }
-            if (roundBits) {
-                status->float_exception_flags |= float_flag_inexact;
-            }
-            zSig0 += roundIncrement;
-            if ( (int64_t) zSig0 < 0 ) zExp = 1;
-            roundIncrement = roundMask + 1;
-            if ( roundNearestEven && ( roundBits<<1 == roundIncrement ) ) {
-                roundMask |= roundIncrement;
-            }
-            zSig0 &= ~ roundMask;
-            return packFloatx80( zSign, zExp, zSig0 );
-        }
-    }
-    if (roundBits) {
-        status->float_exception_flags |= float_flag_inexact;
-    }
-    zSig0 += roundIncrement;
-    if ( zSig0 < roundIncrement ) {
-        ++zExp;
-        zSig0 = LIT64( 0x8000000000000000 );
-    }
-    roundIncrement = roundMask + 1;
-    if ( roundNearestEven && ( roundBits<<1 == roundIncrement ) ) {
-        roundMask |= roundIncrement;
-    }
-    zSig0 &= ~ roundMask;
-    if ( zSig0 == 0 ) zExp = 0;
-    return packFloatx80( zSign, zExp, zSig0 );
- precision80:
-    switch (roundingMode) {
-    case float_round_nearest_even:
-    case float_round_ties_away:
-        increment = ((int64_t)zSig1 < 0);
-        break;
-    case float_round_to_zero:
-        increment = 0;
-        break;
-    case float_round_up:
-        increment = !zSign && zSig1;
-        break;
-    case float_round_down:
-        increment = zSign && zSig1;
-        break;
-    default:
-        abort();
-    }
-    if ( 0x7FFD <= (uint32_t) ( zExp - 1 ) ) {
-        if (    ( 0x7FFE < zExp )
-             || (    ( zExp == 0x7FFE )
-                  && ( zSig0 == LIT64( 0xFFFFFFFFFFFFFFFF ) )
-                  && increment
-                )
-           ) {
-            roundMask = 0;
- overflow:
-            float_raise(float_flag_overflow | float_flag_inexact, status);
-            if (    ( roundingMode == float_round_to_zero )
-                 || ( zSign && ( roundingMode == float_round_up ) )
-                 || ( ! zSign && ( roundingMode == float_round_down ) )
-               ) {
-                return packFloatx80( zSign, 0x7FFE, ~ roundMask );
-            }
-            return packFloatx80( zSign, 0x7FFF, LIT64( 0x8000000000000000 ) );
-        }
-        if ( zExp <= 0 ) {
-            isTiny =
-                   (status->float_detect_tininess
-                    == float_tininess_before_rounding)
-                || ( zExp < 0 )
-                || ! increment
-                || ( zSig0 < LIT64( 0xFFFFFFFFFFFFFFFF ) );
-            shift64ExtraRightJamming( zSig0, zSig1, 1 - zExp, &zSig0, &zSig1 );
-            zExp = 0;
-            if (isTiny && zSig1) {
-                float_raise(float_flag_underflow, status);
-            }
-            if (zSig1) {
-                status->float_exception_flags |= float_flag_inexact;
-            }
-            switch (roundingMode) {
-            case float_round_nearest_even:
-            case float_round_ties_away:
-                increment = ((int64_t)zSig1 < 0);
-                break;
-            case float_round_to_zero:
-                increment = 0;
-                break;
-            case float_round_up:
-                increment = !zSign && zSig1;
-                break;
-            case float_round_down:
-                increment = zSign && zSig1;
-                break;
-            default:
-                abort();
-            }
-            if ( increment ) {
-                ++zSig0;
-                zSig0 &=
-                    ~ ( ( (uint64_t) ( zSig1<<1 ) == 0 ) & roundNearestEven );
-                if ( (int64_t) zSig0 < 0 ) zExp = 1;
-            }
-            return packFloatx80( zSign, zExp, zSig0 );
-        }
-    }
-    if (zSig1) {
-        status->float_exception_flags |= float_flag_inexact;
-    }
-    if ( increment ) {
-        ++zSig0;
-        if ( zSig0 == 0 ) {
-            ++zExp;
-            zSig0 = LIT64( 0x8000000000000000 );
-        }
-        else {
-            zSig0 &= ~ ( ( (uint64_t) ( zSig1<<1 ) == 0 ) & roundNearestEven );
-        }
-    }
-    else {
-        if ( zSig0 == 0 ) zExp = 0;
-    }
-    return packFloatx80( zSign, zExp, zSig0 );
-
-}
-
-/*----------------------------------------------------------------------------
-| Takes an abstract floating-point value having sign `zSign', exponent
-| `zExp', and significand formed by the concatenation of `zSig0' and `zSig1',
-| and returns the proper extended double-precision floating-point value
-| corresponding to the abstract input.  This routine is just like
-| `roundAndPackFloatx80' except that the input significand does not have to be
-| normalized.
-*----------------------------------------------------------------------------*/
-
-static floatx80 normalizeRoundAndPackFloatx80(int8_t roundingPrecision,
-                                              flag zSign, int32_t zExp,
-                                              uint64_t zSig0, uint64_t zSig1,
-                                              float_status *status)
-{
-    int8_t shiftCount;
-
-    if ( zSig0 == 0 ) {
-        zSig0 = zSig1;
-        zSig1 = 0;
-        zExp -= 64;
-    }
-    shiftCount = countLeadingZeros64( zSig0 );
-    shortShift128Left( zSig0, zSig1, shiftCount, &zSig0, &zSig1 );
-    zExp -= shiftCount;
-    return roundAndPackFloatx80(roundingPrecision, zSign, zExp,
-                                zSig0, zSig1, status);
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the least-significant 64 fraction bits of the quadruple-precision
-| floating-point value `a'.
-*----------------------------------------------------------------------------*/
-
-static inline uint64_t extractFloat128Frac1( float128 a )
-{
-
-    return a.low;
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the most-significant 48 fraction bits of the quadruple-precision
-| floating-point value `a'.
-*----------------------------------------------------------------------------*/
-
-static inline uint64_t extractFloat128Frac0( float128 a )
-{
-
-    return a.high & LIT64( 0x0000FFFFFFFFFFFF );
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the exponent bits of the quadruple-precision floating-point value
-| `a'.
-*----------------------------------------------------------------------------*/
-
-static inline int32_t extractFloat128Exp( float128 a )
-{
-
-    return ( a.high>>48 ) & 0x7FFF;
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the sign bit of the quadruple-precision floating-point value `a'.
-*----------------------------------------------------------------------------*/
-
-static inline flag extractFloat128Sign( float128 a )
-{
-
-    return a.high>>63;
-
-}
-
-/*----------------------------------------------------------------------------
-| Normalizes the subnormal quadruple-precision floating-point value
-| represented by the denormalized significand formed by the concatenation of
-| `aSig0' and `aSig1'.  The normalized exponent is stored at the location
-| pointed to by `zExpPtr'.  The most significant 49 bits of the normalized
-| significand are stored at the location pointed to by `zSig0Ptr', and the
-| least significant 64 bits of the normalized significand are stored at the
-| location pointed to by `zSig1Ptr'.
-*----------------------------------------------------------------------------*/
-
-static void
- normalizeFloat128Subnormal(
-     uint64_t aSig0,
-     uint64_t aSig1,
-     int32_t *zExpPtr,
-     uint64_t *zSig0Ptr,
-     uint64_t *zSig1Ptr
- )
-{
-    int8_t shiftCount;
-
-    if ( aSig0 == 0 ) {
-        shiftCount = countLeadingZeros64( aSig1 ) - 15;
-        if ( shiftCount < 0 ) {
-            *zSig0Ptr = aSig1>>( - shiftCount );
-            *zSig1Ptr = aSig1<<( shiftCount & 63 );
-        }
-        else {
-            *zSig0Ptr = aSig1<<shiftCount;
-            *zSig1Ptr = 0;
-        }
-        *zExpPtr = - shiftCount - 63;
-    }
-    else {
-        shiftCount = countLeadingZeros64( aSig0 ) - 15;
-        shortShift128Left( aSig0, aSig1, shiftCount, zSig0Ptr, zSig1Ptr );
-        *zExpPtr = 1 - shiftCount;
-    }
-
-}
-
-/*----------------------------------------------------------------------------
-| Packs the sign `zSign', the exponent `zExp', and the significand formed
-| by the concatenation of `zSig0' and `zSig1' into a quadruple-precision
-| floating-point value, returning the result.  After being shifted into the
-| proper positions, the three fields `zSign', `zExp', and `zSig0' are simply
-| added together to form the most significant 32 bits of the result.  This
-| means that any integer portion of `zSig0' will be added into the exponent.
-| Since a properly normalized significand will have an integer portion equal
-| to 1, the `zExp' input should be 1 less than the desired result exponent
-| whenever `zSig0' and `zSig1' concatenated form a complete, normalized
-| significand.
-*----------------------------------------------------------------------------*/
-
-static inline float128
- packFloat128( flag zSign, int32_t zExp, uint64_t zSig0, uint64_t zSig1 )
-{
-    float128 z;
-
-    z.low = zSig1;
-    z.high = ( ( (uint64_t) zSign )<<63 ) + ( ( (uint64_t) zExp )<<48 ) + zSig0;
-    return z;
-
-}
-
-/*----------------------------------------------------------------------------
-| Takes an abstract floating-point value having sign `zSign', exponent `zExp',
-| and extended significand formed by the concatenation of `zSig0', `zSig1',
-| and `zSig2', and returns the proper quadruple-precision floating-point value
-| corresponding to the abstract input.  Ordinarily, the abstract value is
-| simply rounded and packed into the quadruple-precision format, with the
-| inexact exception raised if the abstract input cannot be represented
-| exactly.  However, if the abstract value is too large, the overflow and
-| inexact exceptions are raised and an infinity or maximal finite value is
-| returned.  If the abstract value is too small, the input value is rounded to
-| a subnormal number, and the underflow and inexact exceptions are raised if
-| the abstract input cannot be represented exactly as a subnormal quadruple-
-| precision floating-point number.
-|     The input significand must be normalized or smaller.  If the input
-| significand is not normalized, `zExp' must be 0; in that case, the result
-| returned is a subnormal number, and it must not require rounding.  In the
-| usual case that the input significand is normalized, `zExp' must be 1 less
-| than the ``true'' floating-point exponent.  The handling of underflow and
-| overflow follows the IEC/IEEE Standard for Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-static float128 roundAndPackFloat128(flag zSign, int32_t zExp,
-                                     uint64_t zSig0, uint64_t zSig1,
-                                     uint64_t zSig2, float_status *status)
-{
-    int8_t roundingMode;
-    flag roundNearestEven, increment, isTiny;
-
-    roundingMode = status->float_rounding_mode;
-    roundNearestEven = ( roundingMode == float_round_nearest_even );
-    switch (roundingMode) {
-    case float_round_nearest_even:
-    case float_round_ties_away:
-        increment = ((int64_t)zSig2 < 0);
-        break;
-    case float_round_to_zero:
-        increment = 0;
-        break;
-    case float_round_up:
-        increment = !zSign && zSig2;
-        break;
-    case float_round_down:
-        increment = zSign && zSig2;
-        break;
-    default:
-        abort();
-    }
-    if ( 0x7FFD <= (uint32_t) zExp ) {
-        if (    ( 0x7FFD < zExp )
-             || (    ( zExp == 0x7FFD )
-                  && eq128(
-                         LIT64( 0x0001FFFFFFFFFFFF ),
-                         LIT64( 0xFFFFFFFFFFFFFFFF ),
-                         zSig0,
-                         zSig1
-                     )
-                  && increment
-                )
-           ) {
-            float_raise(float_flag_overflow | float_flag_inexact, status);
-            if (    ( roundingMode == float_round_to_zero )
-                 || ( zSign && ( roundingMode == float_round_up ) )
-                 || ( ! zSign && ( roundingMode == float_round_down ) )
-               ) {
-                return
-                    packFloat128(
-                        zSign,
-                        0x7FFE,
-                        LIT64( 0x0000FFFFFFFFFFFF ),
-                        LIT64( 0xFFFFFFFFFFFFFFFF )
-                    );
-            }
-            return packFloat128( zSign, 0x7FFF, 0, 0 );
-        }
-        if ( zExp < 0 ) {
-            if (status->flush_to_zero) {
-                float_raise(float_flag_output_denormal, status);
-                return packFloat128(zSign, 0, 0, 0);
-            }
-            isTiny =
-                   (status->float_detect_tininess
-                    == float_tininess_before_rounding)
-                || ( zExp < -1 )
-                || ! increment
-                || lt128(
-                       zSig0,
-                       zSig1,
-                       LIT64( 0x0001FFFFFFFFFFFF ),
-                       LIT64( 0xFFFFFFFFFFFFFFFF )
-                   );
-            shift128ExtraRightJamming(
-                zSig0, zSig1, zSig2, - zExp, &zSig0, &zSig1, &zSig2 );
-            zExp = 0;
-            if (isTiny && zSig2) {
-                float_raise(float_flag_underflow, status);
-            }
-            switch (roundingMode) {
-            case float_round_nearest_even:
-            case float_round_ties_away:
-                increment = ((int64_t)zSig2 < 0);
-                break;
-            case float_round_to_zero:
-                increment = 0;
-                break;
-            case float_round_up:
-                increment = !zSign && zSig2;
-                break;
-            case float_round_down:
-                increment = zSign && zSig2;
-                break;
-            default:
-                abort();
-            }
-        }
-    }
-    if (zSig2) {
-        status->float_exception_flags |= float_flag_inexact;
-    }
-    if ( increment ) {
-        add128( zSig0, zSig1, 0, 1, &zSig0, &zSig1 );
-        zSig1 &= ~ ( ( zSig2 + zSig2 == 0 ) & roundNearestEven );
-    }
-    else {
-        if ( ( zSig0 | zSig1 ) == 0 ) zExp = 0;
-    }
-    return packFloat128( zSign, zExp, zSig0, zSig1 );
-
-}
-
-/*----------------------------------------------------------------------------
-| Takes an abstract floating-point value having sign `zSign', exponent `zExp',
-| and significand formed by the concatenation of `zSig0' and `zSig1', and
-| returns the proper quadruple-precision floating-point value corresponding
-| to the abstract input.  This routine is just like `roundAndPackFloat128'
-| except that the input significand has fewer bits and does not have to be
-| normalized.  In all cases, `zExp' must be 1 less than the ``true'' floating-
-| point exponent.
-*----------------------------------------------------------------------------*/
-
-static float128 normalizeRoundAndPackFloat128(flag zSign, int32_t zExp,
-                                              uint64_t zSig0, uint64_t zSig1,
-                                              float_status *status)
-{
-    int8_t shiftCount;
-    uint64_t zSig2;
-
-    if ( zSig0 == 0 ) {
-        zSig0 = zSig1;
-        zSig1 = 0;
-        zExp -= 64;
-    }
-    shiftCount = countLeadingZeros64( zSig0 ) - 15;
-    if ( 0 <= shiftCount ) {
-        zSig2 = 0;
-        shortShift128Left( zSig0, zSig1, shiftCount, &zSig0, &zSig1 );
-    }
-    else {
-        shift128ExtraRightJamming(
-            zSig0, zSig1, 0, - shiftCount, &zSig0, &zSig1, &zSig2 );
-    }
-    zExp -= shiftCount;
-    return roundAndPackFloat128(zSign, zExp, zSig0, zSig1, zSig2, status);
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of converting the 32-bit two's complement integer `a'
-| to the single-precision floating-point format.  The conversion is performed
-| according to the IEC/IEEE Standard for Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-float32 int32_to_float32(int32_t a, float_status *status)
-{
-    flag zSign;
-
-    if ( a == 0 ) return float32_zero;
-    if ( a == (int32_t) 0x80000000 ) return packFloat32( 1, 0x9E, 0 );
-    zSign = ( a < 0 );
-    return normalizeRoundAndPackFloat32(zSign, 0x9C, zSign ? -a : a, status);
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of converting the 32-bit two's complement integer `a'
-| to the double-precision floating-point format.  The conversion is performed
-| according to the IEC/IEEE Standard for Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-float64 int32_to_float64(int32_t a, float_status *status)
-{
-    flag zSign;
-    uint32_t absA;
-    int8_t shiftCount;
-    uint64_t zSig;
-
-    if ( a == 0 ) return float64_zero;
-    zSign = ( a < 0 );
-    absA = zSign ? - a : a;
-    shiftCount = countLeadingZeros32( absA ) + 21;
-    zSig = absA;
-    return packFloat64( zSign, 0x432 - shiftCount, zSig<<shiftCount );
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of converting the 32-bit two's complement integer `a'
-| to the extended double-precision floating-point format.  The conversion
-| is performed according to the IEC/IEEE Standard for Binary Floating-Point
-| Arithmetic.
-*----------------------------------------------------------------------------*/
-
-floatx80 int32_to_floatx80(int32_t a, float_status *status)
-{
-    flag zSign;
-    uint32_t absA;
-    int8_t shiftCount;
-    uint64_t zSig;
-
-    if ( a == 0 ) return packFloatx80( 0, 0, 0 );
-    zSign = ( a < 0 );
-    absA = zSign ? - a : a;
-    shiftCount = countLeadingZeros32( absA ) + 32;
-    zSig = absA;
-    return packFloatx80( zSign, 0x403E - shiftCount, zSig<<shiftCount );
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of converting the 32-bit two's complement integer `a' to
-| the quadruple-precision floating-point format.  The conversion is performed
-| according to the IEC/IEEE Standard for Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-float128 int32_to_float128(int32_t a, float_status *status)
-{
-    flag zSign;
-    uint32_t absA;
-    int8_t shiftCount;
-    uint64_t zSig0;
-
-    if ( a == 0 ) return packFloat128( 0, 0, 0, 0 );
-    zSign = ( a < 0 );
-    absA = zSign ? - a : a;
-    shiftCount = countLeadingZeros32( absA ) + 17;
-    zSig0 = absA;
-    return packFloat128( zSign, 0x402E - shiftCount, zSig0<<shiftCount, 0 );
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of converting the 64-bit two's complement integer `a'
-| to the single-precision floating-point format.  The conversion is performed
-| according to the IEC/IEEE Standard for Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-float32 int64_to_float32(int64_t a, float_status *status)
-{
-    flag zSign;
-    uint64_t absA;
-    int8_t shiftCount;
-
-    if ( a == 0 ) return float32_zero;
-    zSign = ( a < 0 );
-    absA = zSign ? - a : a;
-    shiftCount = countLeadingZeros64( absA ) - 40;
-    if ( 0 <= shiftCount ) {
-        return packFloat32( zSign, 0x95 - shiftCount, absA<<shiftCount );
-    }
-    else {
-        shiftCount += 7;
-        if ( shiftCount < 0 ) {
-            shift64RightJamming( absA, - shiftCount, &absA );
-        }
-        else {
-            absA <<= shiftCount;
-        }
-        return roundAndPackFloat32(zSign, 0x9C - shiftCount, absA, status);
-    }
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of converting the 64-bit two's complement integer `a'
-| to the double-precision floating-point format.  The conversion is performed
-| according to the IEC/IEEE Standard for Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-float64 int64_to_float64(int64_t a, float_status *status)
-{
-    flag zSign;
-
-    if ( a == 0 ) return float64_zero;
-    if ( a == (int64_t) LIT64( 0x8000000000000000 ) ) {
-        return packFloat64( 1, 0x43E, 0 );
-    }
-    zSign = ( a < 0 );
-    return normalizeRoundAndPackFloat64(zSign, 0x43C, zSign ? -a : a, status);
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of converting the 64-bit two's complement integer `a'
-| to the extended double-precision floating-point format.  The conversion
-| is performed according to the IEC/IEEE Standard for Binary Floating-Point
-| Arithmetic.
-*----------------------------------------------------------------------------*/
-
-floatx80 int64_to_floatx80(int64_t a, float_status *status)
-{
-    flag zSign;
-    uint64_t absA;
-    int8_t shiftCount;
-
-    if ( a == 0 ) return packFloatx80( 0, 0, 0 );
-    zSign = ( a < 0 );
-    absA = zSign ? - a : a;
-    shiftCount = countLeadingZeros64( absA );
-    return packFloatx80( zSign, 0x403E - shiftCount, absA<<shiftCount );
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of converting the 64-bit two's complement integer `a' to
-| the quadruple-precision floating-point format.  The conversion is performed
-| according to the IEC/IEEE Standard for Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-float128 int64_to_float128(int64_t a, float_status *status)
-{
-    flag zSign;
-    uint64_t absA;
-    int8_t shiftCount;
-    int32_t zExp;
-    uint64_t zSig0, zSig1;
-
-    if ( a == 0 ) return packFloat128( 0, 0, 0, 0 );
-    zSign = ( a < 0 );
-    absA = zSign ? - a : a;
-    shiftCount = countLeadingZeros64( absA ) + 49;
-    zExp = 0x406E - shiftCount;
-    if ( 64 <= shiftCount ) {
-        zSig1 = 0;
-        zSig0 = absA;
-        shiftCount -= 64;
-    }
-    else {
-        zSig1 = absA;
-        zSig0 = 0;
-    }
-    shortShift128Left( zSig0, zSig1, shiftCount, &zSig0, &zSig1 );
-    return packFloat128( zSign, zExp, zSig0, zSig1 );
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of converting the 64-bit unsigned integer `a'
-| to the single-precision floating-point format.  The conversion is performed
-| according to the IEC/IEEE Standard for Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-float32 uint64_to_float32(uint64_t a, float_status *status)
-{
-    int shiftcount;
-
-    if (a == 0) {
-        return float32_zero;
-    }
-
-    /* Determine (left) shift needed to put first set bit into bit posn 23
-     * (since packFloat32() expects the binary point between bits 23 and 22);
-     * this is the fast case for smallish numbers.
-     */
-    shiftcount = countLeadingZeros64(a) - 40;
-    if (shiftcount >= 0) {
-        return packFloat32(0, 0x95 - shiftcount, a << shiftcount);
-    }
-    /* Otherwise we need to do a round-and-pack. roundAndPackFloat32()
-     * expects the binary point between bits 30 and 29, hence the + 7.
-     */
-    shiftcount += 7;
-    if (shiftcount < 0) {
-        shift64RightJamming(a, -shiftcount, &a);
-    } else {
-        a <<= shiftcount;
-    }
-
-    return roundAndPackFloat32(0, 0x9c - shiftcount, a, status);
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of converting the 64-bit unsigned integer `a'
-| to the double-precision floating-point format.  The conversion is performed
-| according to the IEC/IEEE Standard for Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-float64 uint64_to_float64(uint64_t a, float_status *status)
-{
-    int exp = 0x43C;
-    int shiftcount;
-
-    if (a == 0) {
-        return float64_zero;
-    }
-
-    shiftcount = countLeadingZeros64(a) - 1;
-    if (shiftcount < 0) {
-        shift64RightJamming(a, -shiftcount, &a);
-    } else {
-        a <<= shiftcount;
-    }
-    return roundAndPackFloat64(0, exp - shiftcount, a, status);
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of converting the 64-bit unsigned integer `a'
-| to the quadruple-precision floating-point format.  The conversion is performed
-| according to the IEC/IEEE Standard for Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-float128 uint64_to_float128(uint64_t a, float_status *status)
-{
-    if (a == 0) {
-        return float128_zero;
-    }
-    return normalizeRoundAndPackFloat128(0, 0x406E, a, 0, status);
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of converting the single-precision floating-point value
-| `a' to the 32-bit two's complement integer format.  The conversion is
-| performed according to the IEC/IEEE Standard for Binary Floating-Point
-| Arithmetic---which means in particular that the conversion is rounded
-| according to the current rounding mode.  If `a' is a NaN, the largest
-| positive integer is returned.  Otherwise, if the conversion overflows, the
-| largest integer with the same sign as `a' is returned.
-*----------------------------------------------------------------------------*/
-
-int32_t float32_to_int32(float32 a, float_status *status)
-{
-    flag aSign;
-    int aExp;
-    int shiftCount;
-    uint32_t aSig;
-    uint64_t aSig64;
-
-    a = float32_squash_input_denormal(a, status);
-    aSig = extractFloat32Frac( a );
-    aExp = extractFloat32Exp( a );
-    aSign = extractFloat32Sign( a );
-    if ( ( aExp == 0xFF ) && aSig ) aSign = 0;
-    if ( aExp ) aSig |= 0x00800000;
-    shiftCount = 0xAF - aExp;
-    aSig64 = aSig;
-    aSig64 <<= 32;
-    if ( 0 < shiftCount ) shift64RightJamming( aSig64, shiftCount, &aSig64 );
-    return roundAndPackInt32(aSign, aSig64, status);
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of converting the single-precision floating-point value
-| `a' to the 32-bit two's complement integer format.  The conversion is
-| performed according to the IEC/IEEE Standard for Binary Floating-Point
-| Arithmetic, except that the conversion is always rounded toward zero.
-| If `a' is a NaN, the largest positive integer is returned.  Otherwise, if
-| the conversion overflows, the largest integer with the same sign as `a' is
-| returned.
-*----------------------------------------------------------------------------*/
-
-int32_t float32_to_int32_round_to_zero(float32 a, float_status *status)
-{
-    flag aSign;
-    int aExp;
-    int shiftCount;
-    uint32_t aSig;
-    int32_t z;
-    a = float32_squash_input_denormal(a, status);
-
-    aSig = extractFloat32Frac( a );
-    aExp = extractFloat32Exp( a );
-    aSign = extractFloat32Sign( a );
-    shiftCount = aExp - 0x9E;
-    if ( 0 <= shiftCount ) {
-        if ( float32_val(a) != 0xCF000000 ) {
-            float_raise(float_flag_invalid, status);
-            if ( ! aSign || ( ( aExp == 0xFF ) && aSig ) ) return 0x7FFFFFFF;
-        }
-        return (int32_t) 0x80000000;
-    }
-    else if ( aExp <= 0x7E ) {
-        if (aExp | aSig) {
-            status->float_exception_flags |= float_flag_inexact;
-        }
-        return 0;
-    }
-    aSig = ( aSig | 0x00800000 )<<8;
-    z = aSig>>( - shiftCount );
-    if ( (uint32_t) ( aSig<<( shiftCount & 31 ) ) ) {
-        status->float_exception_flags |= float_flag_inexact;
-    }
-    if ( aSign ) z = - z;
-    return z;
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of converting the single-precision floating-point value
-| `a' to the 16-bit two's complement integer format.  The conversion is
-| performed according to the IEC/IEEE Standard for Binary Floating-Point
-| Arithmetic, except that the conversion is always rounded toward zero.
-| If `a' is a NaN, the largest positive integer is returned.  Otherwise, if
-| the conversion overflows, the largest integer with the same sign as `a' is
-| returned.
-*----------------------------------------------------------------------------*/
-
-int16_t float32_to_int16_round_to_zero(float32 a, float_status *status)
-{
-    flag aSign;
-    int aExp;
-    int shiftCount;
-    uint32_t aSig;
-    int32_t z;
-
-    aSig = extractFloat32Frac( a );
-    aExp = extractFloat32Exp( a );
-    aSign = extractFloat32Sign( a );
-    shiftCount = aExp - 0x8E;
-    if ( 0 <= shiftCount ) {
-        if ( float32_val(a) != 0xC7000000 ) {
-            float_raise(float_flag_invalid, status);
-            if ( ! aSign || ( ( aExp == 0xFF ) && aSig ) ) {
-                return 0x7FFF;
-            }
-        }
-        return (int32_t) 0xffff8000;
-    }
-    else if ( aExp <= 0x7E ) {
-        if ( aExp | aSig ) {
-            status->float_exception_flags |= float_flag_inexact;
-        }
-        return 0;
-    }
-    shiftCount -= 0x10;
-    aSig = ( aSig | 0x00800000 )<<8;
-    z = aSig>>( - shiftCount );
-    if ( (uint32_t) ( aSig<<( shiftCount & 31 ) ) ) {
-        status->float_exception_flags |= float_flag_inexact;
-    }
-    if ( aSign ) {
-        z = - z;
-    }
-    return z;
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of converting the single-precision floating-point value
-| `a' to the 64-bit two's complement integer format.  The conversion is
-| performed according to the IEC/IEEE Standard for Binary Floating-Point
-| Arithmetic---which means in particular that the conversion is rounded
-| according to the current rounding mode.  If `a' is a NaN, the largest
-| positive integer is returned.  Otherwise, if the conversion overflows, the
-| largest integer with the same sign as `a' is returned.
-*----------------------------------------------------------------------------*/
-
-int64_t float32_to_int64(float32 a, float_status *status)
-{
-    flag aSign;
-    int aExp;
-    int shiftCount;
-    uint32_t aSig;
-    uint64_t aSig64, aSigExtra;
-    a = float32_squash_input_denormal(a, status);
-
-    aSig = extractFloat32Frac( a );
-    aExp = extractFloat32Exp( a );
-    aSign = extractFloat32Sign( a );
-    shiftCount = 0xBE - aExp;
-    if ( shiftCount < 0 ) {
-        float_raise(float_flag_invalid, status);
-        if ( ! aSign || ( ( aExp == 0xFF ) && aSig ) ) {
-            return LIT64( 0x7FFFFFFFFFFFFFFF );
-        }
-        return (int64_t) LIT64( 0x8000000000000000 );
-    }
-    if ( aExp ) aSig |= 0x00800000;
-    aSig64 = aSig;
-    aSig64 <<= 40;
-    shift64ExtraRightJamming( aSig64, 0, shiftCount, &aSig64, &aSigExtra );
-    return roundAndPackInt64(aSign, aSig64, aSigExtra, status);
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of converting the single-precision floating-point value
-| `a' to the 64-bit unsigned integer format.  The conversion is
-| performed according to the IEC/IEEE Standard for Binary Floating-Point
-| Arithmetic---which means in particular that the conversion is rounded
-| according to the current rounding mode.  If `a' is a NaN, the largest
-| unsigned integer is returned.  Otherwise, if the conversion overflows, the
-| largest unsigned integer is returned.  If the 'a' is negative, the result
-| is rounded and zero is returned; values that do not round to zero will
-| raise the inexact exception flag.
-*----------------------------------------------------------------------------*/
-
-uint64_t float32_to_uint64(float32 a, float_status *status)
-{
-    flag aSign;
-    int aExp;
-    int shiftCount;
-    uint32_t aSig;
-    uint64_t aSig64, aSigExtra;
-    a = float32_squash_input_denormal(a, status);
-
-    aSig = extractFloat32Frac(a);
-    aExp = extractFloat32Exp(a);
-    aSign = extractFloat32Sign(a);
-    if ((aSign) && (aExp > 126)) {
-        float_raise(float_flag_invalid, status);
-        if (float32_is_any_nan(a)) {
-            return LIT64(0xFFFFFFFFFFFFFFFF);
-        } else {
-            return 0;
-        }
-    }
-    shiftCount = 0xBE - aExp;
-    if (aExp) {
-        aSig |= 0x00800000;
-    }
-    if (shiftCount < 0) {
-        float_raise(float_flag_invalid, status);
-        return LIT64(0xFFFFFFFFFFFFFFFF);
-    }
-
-    aSig64 = aSig;
-    aSig64 <<= 40;
-    shift64ExtraRightJamming(aSig64, 0, shiftCount, &aSig64, &aSigExtra);
-    return roundAndPackUint64(aSign, aSig64, aSigExtra, status);
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of converting the single-precision floating-point value
-| `a' to the 64-bit unsigned integer format.  The conversion is
-| performed according to the IEC/IEEE Standard for Binary Floating-Point
-| Arithmetic, except that the conversion is always rounded toward zero.  If
-| `a' is a NaN, the largest unsigned integer is returned.  Otherwise, if the
-| conversion overflows, the largest unsigned integer is returned.  If the
-| 'a' is negative, the result is rounded and zero is returned; values that do
-| not round to zero will raise the inexact flag.
-*----------------------------------------------------------------------------*/
-
-uint64_t float32_to_uint64_round_to_zero(float32 a, float_status *status)
-{
-    signed char current_rounding_mode = status->float_rounding_mode;
-    set_float_rounding_mode(float_round_to_zero, status);
-    int64_t v = float32_to_uint64(a, status);
-    set_float_rounding_mode(current_rounding_mode, status);
-    return v;
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of converting the single-precision floating-point value
-| `a' to the 64-bit two's complement integer format.  The conversion is
-| performed according to the IEC/IEEE Standard for Binary Floating-Point
-| Arithmetic, except that the conversion is always rounded toward zero.  If
-| `a' is a NaN, the largest positive integer is returned.  Otherwise, if the
-| conversion overflows, the largest integer with the same sign as `a' is
-| returned.
-*----------------------------------------------------------------------------*/
-
-int64_t float32_to_int64_round_to_zero(float32 a, float_status *status)
-{
-    flag aSign;
-    int aExp;
-    int shiftCount;
-    uint32_t aSig;
-    uint64_t aSig64;
-    int64_t z;
-    a = float32_squash_input_denormal(a, status);
-
-    aSig = extractFloat32Frac( a );
-    aExp = extractFloat32Exp( a );
-    aSign = extractFloat32Sign( a );
-    shiftCount = aExp - 0xBE;
-    if ( 0 <= shiftCount ) {
-        if ( float32_val(a) != 0xDF000000 ) {
-            float_raise(float_flag_invalid, status);
-            if ( ! aSign || ( ( aExp == 0xFF ) && aSig ) ) {
-                return LIT64( 0x7FFFFFFFFFFFFFFF );
-            }
-        }
-        return (int64_t) LIT64( 0x8000000000000000 );
-    }
-    else if ( aExp <= 0x7E ) {
-        if (aExp | aSig) {
-            status->float_exception_flags |= float_flag_inexact;
-        }
-        return 0;
-    }
-    aSig64 = aSig | 0x00800000;
-    aSig64 <<= 40;
-    z = aSig64>>( - shiftCount );
-    if ( (uint64_t) ( aSig64<<( shiftCount & 63 ) ) ) {
-        status->float_exception_flags |= float_flag_inexact;
-    }
-    if ( aSign ) z = - z;
-    return z;
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of converting the single-precision floating-point value
-| `a' to the double-precision floating-point format.  The conversion is
-| performed according to the IEC/IEEE Standard for Binary Floating-Point
-| Arithmetic.
-*----------------------------------------------------------------------------*/
-
-float64 float32_to_float64(float32 a, float_status *status)
-{
-    flag aSign;
-    int aExp;
-    uint32_t aSig;
-    a = float32_squash_input_denormal(a, status);
-
-    aSig = extractFloat32Frac( a );
-    aExp = extractFloat32Exp( a );
-    aSign = extractFloat32Sign( a );
-    if ( aExp == 0xFF ) {
-        if (aSig) {
-            return commonNaNToFloat64(float32ToCommonNaN(a, status), status);
-        }
-        return packFloat64( aSign, 0x7FF, 0 );
-    }
-    if ( aExp == 0 ) {
-        if ( aSig == 0 ) return packFloat64( aSign, 0, 0 );
-        normalizeFloat32Subnormal( aSig, &aExp, &aSig );
-        --aExp;
-    }
-    return packFloat64( aSign, aExp + 0x380, ( (uint64_t) aSig )<<29 );
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of converting the single-precision floating-point value
-| `a' to the extended double-precision floating-point format.  The conversion
-| is performed according to the IEC/IEEE Standard for Binary Floating-Point
-| Arithmetic.
-*----------------------------------------------------------------------------*/
-
-floatx80 float32_to_floatx80(float32 a, float_status *status)
-{
-    flag aSign;
-    int aExp;
-    uint32_t aSig;
-
-    a = float32_squash_input_denormal(a, status);
-    aSig = extractFloat32Frac( a );
-    aExp = extractFloat32Exp( a );
-    aSign = extractFloat32Sign( a );
-    if ( aExp == 0xFF ) {
-        if (aSig) {
-            return commonNaNToFloatx80(float32ToCommonNaN(a, status), status);
-        }
-        return packFloatx80( aSign, 0x7FFF, LIT64( 0x8000000000000000 ) );
-    }
-    if ( aExp == 0 ) {
-        if ( aSig == 0 ) return packFloatx80( aSign, 0, 0 );
-        normalizeFloat32Subnormal( aSig, &aExp, &aSig );
-    }
-    aSig |= 0x00800000;
-    return packFloatx80( aSign, aExp + 0x3F80, ( (uint64_t) aSig )<<40 );
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of converting the single-precision floating-point value
-| `a' to the double-precision floating-point format.  The conversion is
-| performed according to the IEC/IEEE Standard for Binary Floating-Point
-| Arithmetic.
-*----------------------------------------------------------------------------*/
-
-float128 float32_to_float128(float32 a, float_status *status)
-{
-    flag aSign;
-    int aExp;
-    uint32_t aSig;
-
-    a = float32_squash_input_denormal(a, status);
-    aSig = extractFloat32Frac( a );
-    aExp = extractFloat32Exp( a );
-    aSign = extractFloat32Sign( a );
-    if ( aExp == 0xFF ) {
-        if (aSig) {
-            return commonNaNToFloat128(float32ToCommonNaN(a, status), status);
-        }
-        return packFloat128( aSign, 0x7FFF, 0, 0 );
-    }
-    if ( aExp == 0 ) {
-        if ( aSig == 0 ) return packFloat128( aSign, 0, 0, 0 );
-        normalizeFloat32Subnormal( aSig, &aExp, &aSig );
-        --aExp;
-    }
-    return packFloat128( aSign, aExp + 0x3F80, ( (uint64_t) aSig )<<25, 0 );
-
-}
-
-/*----------------------------------------------------------------------------
-| Rounds the single-precision floating-point value `a' to an integer, and
-| returns the result as a single-precision floating-point value.  The
-| operation is performed according to the IEC/IEEE Standard for Binary
-| Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-float32 float32_round_to_int(float32 a, float_status *status)
-{
-    flag aSign;
-    int aExp;
-    uint32_t lastBitMask, roundBitsMask;
-    uint32_t z;
-    a = float32_squash_input_denormal(a, status);
-
-    aExp = extractFloat32Exp( a );
-    if ( 0x96 <= aExp ) {
-        if ( ( aExp == 0xFF ) && extractFloat32Frac( a ) ) {
-            return propagateFloat32NaN(a, a, status);
-        }
-        return a;
-    }
-    if ( aExp <= 0x7E ) {
-        if ( (uint32_t) ( float32_val(a)<<1 ) == 0 ) return a;
-        status->float_exception_flags |= float_flag_inexact;
-        aSign = extractFloat32Sign( a );
-        switch (status->float_rounding_mode) {
-         case float_round_nearest_even:
-            if ( ( aExp == 0x7E ) && extractFloat32Frac( a ) ) {
-                return packFloat32( aSign, 0x7F, 0 );
-            }
-            break;
-        case float_round_ties_away:
-            if (aExp == 0x7E) {
-                return packFloat32(aSign, 0x7F, 0);
-            }
-            break;
-         case float_round_down:
-            return make_float32(aSign ? 0xBF800000 : 0);
-         case float_round_up:
-            return make_float32(aSign ? 0x80000000 : 0x3F800000);
-        }
-        return packFloat32( aSign, 0, 0 );
-    }
-    lastBitMask = 1;
-    lastBitMask <<= 0x96 - aExp;
-    roundBitsMask = lastBitMask - 1;
-    z = float32_val(a);
-    switch (status->float_rounding_mode) {
-    case float_round_nearest_even:
-        z += lastBitMask>>1;
-        if ((z & roundBitsMask) == 0) {
-            z &= ~lastBitMask;
-        }
-        break;
-    case float_round_ties_away:
-        z += lastBitMask >> 1;
-        break;
-    case float_round_to_zero:
-        break;
-    case float_round_up:
-        if (!extractFloat32Sign(make_float32(z))) {
-            z += roundBitsMask;
-        }
-        break;
-    case float_round_down:
-        if (extractFloat32Sign(make_float32(z))) {
-            z += roundBitsMask;
-        }
-        break;
-    default:
-        abort();
-    }
-    z &= ~ roundBitsMask;
-    if (z != float32_val(a)) {
-        status->float_exception_flags |= float_flag_inexact;
-    }
-    return make_float32(z);
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of adding the absolute values of the single-precision
-| floating-point values `a' and `b'.  If `zSign' is 1, the sum is negated
-| before being returned.  `zSign' is ignored if the result is a NaN.
-| The addition is performed according to the IEC/IEEE Standard for Binary
-| Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-static float32 addFloat32Sigs(float32 a, float32 b, flag zSign,
-                              float_status *status)
-{
-    int aExp, bExp, zExp;
-    uint32_t aSig, bSig, zSig;
-    int expDiff;
-
-    aSig = extractFloat32Frac( a );
-    aExp = extractFloat32Exp( a );
-    bSig = extractFloat32Frac( b );
-    bExp = extractFloat32Exp( b );
-    expDiff = aExp - bExp;
-    aSig <<= 6;
-    bSig <<= 6;
-    if ( 0 < expDiff ) {
-        if ( aExp == 0xFF ) {
-            if (aSig) {
-                return propagateFloat32NaN(a, b, status);
-            }
-            return a;
-        }
-        if ( bExp == 0 ) {
-            --expDiff;
-        }
-        else {
-            bSig |= 0x20000000;
-        }
-        shift32RightJamming( bSig, expDiff, &bSig );
-        zExp = aExp;
-    }
-    else if ( expDiff < 0 ) {
-        if ( bExp == 0xFF ) {
-            if (bSig) {
-                return propagateFloat32NaN(a, b, status);
-            }
-            return packFloat32( zSign, 0xFF, 0 );
-        }
-        if ( aExp == 0 ) {
-            ++expDiff;
-        }
-        else {
-            aSig |= 0x20000000;
-        }
-        shift32RightJamming( aSig, - expDiff, &aSig );
-        zExp = bExp;
-    }
-    else {
-        if ( aExp == 0xFF ) {
-            if (aSig | bSig) {
-                return propagateFloat32NaN(a, b, status);
-            }
-            return a;
-        }
-        if ( aExp == 0 ) {
-            if (status->flush_to_zero) {
-                if (aSig | bSig) {
-                    float_raise(float_flag_output_denormal, status);
-                }
-                return packFloat32(zSign, 0, 0);
-            }
-            return packFloat32( zSign, 0, ( aSig + bSig )>>6 );
-        }
-        zSig = 0x40000000 + aSig + bSig;
-        zExp = aExp;
-        goto roundAndPack;
-    }
-    aSig |= 0x20000000;
-    zSig = ( aSig + bSig )<<1;
-    --zExp;
-    if ( (int32_t) zSig < 0 ) {
-        zSig = aSig + bSig;
-        ++zExp;
-    }
- roundAndPack:
-    return roundAndPackFloat32(zSign, zExp, zSig, status);
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of subtracting the absolute values of the single-
-| precision floating-point values `a' and `b'.  If `zSign' is 1, the
-| difference is negated before being returned.  `zSign' is ignored if the
-| result is a NaN.  The subtraction is performed according to the IEC/IEEE
-| Standard for Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-static float32 subFloat32Sigs(float32 a, float32 b, flag zSign,
-                              float_status *status)
-{
-    int aExp, bExp, zExp;
-    uint32_t aSig, bSig, zSig;
-    int expDiff;
-
-    aSig = extractFloat32Frac( a );
-    aExp = extractFloat32Exp( a );
-    bSig = extractFloat32Frac( b );
-    bExp = extractFloat32Exp( b );
-    expDiff = aExp - bExp;
-    aSig <<= 7;
-    bSig <<= 7;
-    if ( 0 < expDiff ) goto aExpBigger;
-    if ( expDiff < 0 ) goto bExpBigger;
-    if ( aExp == 0xFF ) {
-        if (aSig | bSig) {
-            return propagateFloat32NaN(a, b, status);
-        }
-        float_raise(float_flag_invalid, status);
-        return float32_default_nan;
-    }
-    if ( aExp == 0 ) {
-        aExp = 1;
-        bExp = 1;
-    }
-    if ( bSig < aSig ) goto aBigger;
-    if ( aSig < bSig ) goto bBigger;
-    return packFloat32(status->float_rounding_mode == float_round_down, 0, 0);
- bExpBigger:
-    if ( bExp == 0xFF ) {
-        if (bSig) {
-            return propagateFloat32NaN(a, b, status);
-        }
-        return packFloat32( zSign ^ 1, 0xFF, 0 );
-    }
-    if ( aExp == 0 ) {
-        ++expDiff;
-    }
-    else {
-        aSig |= 0x40000000;
-    }
-    shift32RightJamming( aSig, - expDiff, &aSig );
-    bSig |= 0x40000000;
- bBigger:
-    zSig = bSig - aSig;
-    zExp = bExp;
-    zSign ^= 1;
-    goto normalizeRoundAndPack;
- aExpBigger:
-    if ( aExp == 0xFF ) {
-        if (aSig) {
-            return propagateFloat32NaN(a, b, status);
-        }
-        return a;
-    }
-    if ( bExp == 0 ) {
-        --expDiff;
-    }
-    else {
-        bSig |= 0x40000000;
-    }
-    shift32RightJamming( bSig, expDiff, &bSig );
-    aSig |= 0x40000000;
- aBigger:
-    zSig = aSig - bSig;
-    zExp = aExp;
- normalizeRoundAndPack:
-    --zExp;
-    return normalizeRoundAndPackFloat32(zSign, zExp, zSig, status);
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of adding the single-precision floating-point values `a'
-| and `b'.  The operation is performed according to the IEC/IEEE Standard for
-| Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-float32 float32_add(float32 a, float32 b, float_status *status)
-{
-    flag aSign, bSign;
-    a = float32_squash_input_denormal(a, status);
-    b = float32_squash_input_denormal(b, status);
-
-    aSign = extractFloat32Sign( a );
-    bSign = extractFloat32Sign( b );
-    if ( aSign == bSign ) {
-        return addFloat32Sigs(a, b, aSign, status);
-    }
-    else {
-        return subFloat32Sigs(a, b, aSign, status);
-    }
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of subtracting the single-precision floating-point values
-| `a' and `b'.  The operation is performed according to the IEC/IEEE Standard
-| for Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-float32 float32_sub(float32 a, float32 b, float_status *status)
-{
-    flag aSign, bSign;
-    a = float32_squash_input_denormal(a, status);
-    b = float32_squash_input_denormal(b, status);
-
-    aSign = extractFloat32Sign( a );
-    bSign = extractFloat32Sign( b );
-    if ( aSign == bSign ) {
-        return subFloat32Sigs(a, b, aSign, status);
-    }
-    else {
-        return addFloat32Sigs(a, b, aSign, status);
-    }
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of multiplying the single-precision floating-point values
-| `a' and `b'.  The operation is performed according to the IEC/IEEE Standard
-| for Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-float32 float32_mul(float32 a, float32 b, float_status *status)
-{
-    flag aSign, bSign, zSign;
-    int aExp, bExp, zExp;
-    uint32_t aSig, bSig;
-    uint64_t zSig64;
-    uint32_t zSig;
-
-    a = float32_squash_input_denormal(a, status);
-    b = float32_squash_input_denormal(b, status);
-
-    aSig = extractFloat32Frac( a );
-    aExp = extractFloat32Exp( a );
-    aSign = extractFloat32Sign( a );
-    bSig = extractFloat32Frac( b );
-    bExp = extractFloat32Exp( b );
-    bSign = extractFloat32Sign( b );
-    zSign = aSign ^ bSign;
-    if ( aExp == 0xFF ) {
-        if ( aSig || ( ( bExp == 0xFF ) && bSig ) ) {
-            return propagateFloat32NaN(a, b, status);
-        }
-        if ( ( bExp | bSig ) == 0 ) {
-            float_raise(float_flag_invalid, status);
-            return float32_default_nan;
-        }
-        return packFloat32( zSign, 0xFF, 0 );
-    }
-    if ( bExp == 0xFF ) {
-        if (bSig) {
-            return propagateFloat32NaN(a, b, status);
-        }
-        if ( ( aExp | aSig ) == 0 ) {
-            float_raise(float_flag_invalid, status);
-            return float32_default_nan;
-        }
-        return packFloat32( zSign, 0xFF, 0 );
-    }
-    if ( aExp == 0 ) {
-        if ( aSig == 0 ) return packFloat32( zSign, 0, 0 );
-        normalizeFloat32Subnormal( aSig, &aExp, &aSig );
-    }
-    if ( bExp == 0 ) {
-        if ( bSig == 0 ) return packFloat32( zSign, 0, 0 );
-        normalizeFloat32Subnormal( bSig, &bExp, &bSig );
-    }
-    zExp = aExp + bExp - 0x7F;
-    aSig = ( aSig | 0x00800000 )<<7;
-    bSig = ( bSig | 0x00800000 )<<8;
-    shift64RightJamming( ( (uint64_t) aSig ) * bSig, 32, &zSig64 );
-    zSig = zSig64;
-    if ( 0 <= (int32_t) ( zSig<<1 ) ) {
-        zSig <<= 1;
-        --zExp;
-    }
-    return roundAndPackFloat32(zSign, zExp, zSig, status);
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of dividing the single-precision floating-point value `a'
-| by the corresponding value `b'.  The operation is performed according to the
-| IEC/IEEE Standard for Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-float32 float32_div(float32 a, float32 b, float_status *status)
-{
-    flag aSign, bSign, zSign;
-    int aExp, bExp, zExp;
-    uint32_t aSig, bSig, zSig;
-    a = float32_squash_input_denormal(a, status);
-    b = float32_squash_input_denormal(b, status);
-
-    aSig = extractFloat32Frac( a );
-    aExp = extractFloat32Exp( a );
-    aSign = extractFloat32Sign( a );
-    bSig = extractFloat32Frac( b );
-    bExp = extractFloat32Exp( b );
-    bSign = extractFloat32Sign( b );
-    zSign = aSign ^ bSign;
-    if ( aExp == 0xFF ) {
-        if (aSig) {
-            return propagateFloat32NaN(a, b, status);
-        }
-        if ( bExp == 0xFF ) {
-            if (bSig) {
-                return propagateFloat32NaN(a, b, status);
-            }
-            float_raise(float_flag_invalid, status);
-            return float32_default_nan;
-        }
-        return packFloat32( zSign, 0xFF, 0 );
-    }
-    if ( bExp == 0xFF ) {
-        if (bSig) {
-            return propagateFloat32NaN(a, b, status);
-        }
-        return packFloat32( zSign, 0, 0 );
-    }
-    if ( bExp == 0 ) {
-        if ( bSig == 0 ) {
-            if ( ( aExp | aSig ) == 0 ) {
-                float_raise(float_flag_invalid, status);
-                return float32_default_nan;
-            }
-            float_raise(float_flag_divbyzero, status);
-            return packFloat32( zSign, 0xFF, 0 );
-        }
-        normalizeFloat32Subnormal( bSig, &bExp, &bSig );
-    }
-    if ( aExp == 0 ) {
-        if ( aSig == 0 ) return packFloat32( zSign, 0, 0 );
-        normalizeFloat32Subnormal( aSig, &aExp, &aSig );
-    }
-    zExp = aExp - bExp + 0x7D;
-    aSig = ( aSig | 0x00800000 )<<7;
-    bSig = ( bSig | 0x00800000 )<<8;
-    if ( bSig <= ( aSig + aSig ) ) {
-        aSig >>= 1;
-        ++zExp;
-    }
-    zSig = ( ( (uint64_t) aSig )<<32 ) / bSig;
-    if ( ( zSig & 0x3F ) == 0 ) {
-        zSig |= ( (uint64_t) bSig * zSig != ( (uint64_t) aSig )<<32 );
-    }
-    return roundAndPackFloat32(zSign, zExp, zSig, status);
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the remainder of the single-precision floating-point value `a'
-| with respect to the corresponding value `b'.  The operation is performed
-| according to the IEC/IEEE Standard for Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-float32 float32_rem(float32 a, float32 b, float_status *status)
-{
-    flag aSign, zSign;
-    int aExp, bExp, expDiff;
-    uint32_t aSig, bSig;
-    uint32_t q;
-    uint64_t aSig64, bSig64, q64;
-    uint32_t alternateASig;
-    int32_t sigMean;
-    a = float32_squash_input_denormal(a, status);
-    b = float32_squash_input_denormal(b, status);
-
-    aSig = extractFloat32Frac( a );
-    aExp = extractFloat32Exp( a );
-    aSign = extractFloat32Sign( a );
-    bSig = extractFloat32Frac( b );
-    bExp = extractFloat32Exp( b );
-    if ( aExp == 0xFF ) {
-        if ( aSig || ( ( bExp == 0xFF ) && bSig ) ) {
-            return propagateFloat32NaN(a, b, status);
-        }
-        float_raise(float_flag_invalid, status);
-        return float32_default_nan;
-    }
-    if ( bExp == 0xFF ) {
-        if (bSig) {
-            return propagateFloat32NaN(a, b, status);
-        }
-        return a;
-    }
-    if ( bExp == 0 ) {
-        if ( bSig == 0 ) {
-            float_raise(float_flag_invalid, status);
-            return float32_default_nan;
-        }
-        normalizeFloat32Subnormal( bSig, &bExp, &bSig );
-    }
-    if ( aExp == 0 ) {
-        if ( aSig == 0 ) return a;
-        normalizeFloat32Subnormal( aSig, &aExp, &aSig );
-    }
-    expDiff = aExp - bExp;
-    aSig |= 0x00800000;
-    bSig |= 0x00800000;
-    if ( expDiff < 32 ) {
-        aSig <<= 8;
-        bSig <<= 8;
-        if ( expDiff < 0 ) {
-            if ( expDiff < -1 ) return a;
-            aSig >>= 1;
-        }
-        q = ( bSig <= aSig );
-        if ( q ) aSig -= bSig;
-        if ( 0 < expDiff ) {
-            q = ( ( (uint64_t) aSig )<<32 ) / bSig;
-            q >>= 32 - expDiff;
-            bSig >>= 2;
-            aSig = ( ( aSig>>1 )<<( expDiff - 1 ) ) - bSig * q;
-        }
-        else {
-            aSig >>= 2;
-            bSig >>= 2;
-        }
-    }
-    else {
-        if ( bSig <= aSig ) aSig -= bSig;
-        aSig64 = ( (uint64_t) aSig )<<40;
-        bSig64 = ( (uint64_t) bSig )<<40;
-        expDiff -= 64;
-        while ( 0 < expDiff ) {
-            q64 = estimateDiv128To64( aSig64, 0, bSig64 );
-            q64 = ( 2 < q64 ) ? q64 - 2 : 0;
-            aSig64 = - ( ( bSig * q64 )<<38 );
-            expDiff -= 62;
-        }
-        expDiff += 64;
-        q64 = estimateDiv128To64( aSig64, 0, bSig64 );
-        q64 = ( 2 < q64 ) ? q64 - 2 : 0;
-        q = q64>>( 64 - expDiff );
-        bSig <<= 6;
-        aSig = ( ( aSig64>>33 )<<( expDiff - 1 ) ) - bSig * q;
-    }
-    do {
-        alternateASig = aSig;
-        ++q;
-        aSig -= bSig;
-    } while ( 0 <= (int32_t) aSig );
-    sigMean = aSig + alternateASig;
-    if ( ( sigMean < 0 ) || ( ( sigMean == 0 ) && ( q & 1 ) ) ) {
-        aSig = alternateASig;
-    }
-    zSign = ( (int32_t) aSig < 0 );
-    if ( zSign ) aSig = - aSig;
-    return normalizeRoundAndPackFloat32(aSign ^ zSign, bExp, aSig, status);
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of multiplying the single-precision floating-point values
-| `a' and `b' then adding 'c', with no intermediate rounding step after the
-| multiplication.  The operation is performed according to the IEC/IEEE
-| Standard for Binary Floating-Point Arithmetic 754-2008.
-| The flags argument allows the caller to select negation of the
-| addend, the intermediate product, or the final result. (The difference
-| between this and having the caller do a separate negation is that negating
-| externally will flip the sign bit on NaNs.)
-*----------------------------------------------------------------------------*/
-
-float32 float32_muladd(float32 a, float32 b, float32 c, int flags,
-                       float_status *status)
-{
-    flag aSign, bSign, cSign, zSign;
-    int aExp, bExp, cExp, pExp, zExp, expDiff;
-    uint32_t aSig, bSig, cSig;
-    flag pInf, pZero, pSign;
-    uint64_t pSig64, cSig64, zSig64;
-    uint32_t pSig;
-    int shiftcount;
-    flag signflip, infzero;
-
-    a = float32_squash_input_denormal(a, status);
-    b = float32_squash_input_denormal(b, status);
-    c = float32_squash_input_denormal(c, status);
-    aSig = extractFloat32Frac(a);
-    aExp = extractFloat32Exp(a);
-    aSign = extractFloat32Sign(a);
-    bSig = extractFloat32Frac(b);
-    bExp = extractFloat32Exp(b);
-    bSign = extractFloat32Sign(b);
-    cSig = extractFloat32Frac(c);
-    cExp = extractFloat32Exp(c);
-    cSign = extractFloat32Sign(c);
-
-    infzero = ((aExp == 0 && aSig == 0 && bExp == 0xff && bSig == 0) ||
-               (aExp == 0xff && aSig == 0 && bExp == 0 && bSig == 0));
-
-    /* It is implementation-defined whether the cases of (0,inf,qnan)
-     * and (inf,0,qnan) raise InvalidOperation or not (and what QNaN
-     * they return if they do), so we have to hand this information
-     * off to the target-specific pick-a-NaN routine.
-     */
-    if (((aExp == 0xff) && aSig) ||
-        ((bExp == 0xff) && bSig) ||
-        ((cExp == 0xff) && cSig)) {
-        return propagateFloat32MulAddNaN(a, b, c, infzero, status);
-    }
-
-    if (infzero) {
-        float_raise(float_flag_invalid, status);
-        return float32_default_nan;
-    }
-
-    if (flags & float_muladd_negate_c) {
-        cSign ^= 1;
-    }
-
-    signflip = (flags & float_muladd_negate_result) ? 1 : 0;
-
-    /* Work out the sign and type of the product */
-    pSign = aSign ^ bSign;
-    if (flags & float_muladd_negate_product) {
-        pSign ^= 1;
-    }
-    pInf = (aExp == 0xff) || (bExp == 0xff);
-    pZero = ((aExp | aSig) == 0) || ((bExp | bSig) == 0);
-
-    if (cExp == 0xff) {
-        if (pInf && (pSign ^ cSign)) {
-            /* addition of opposite-signed infinities => InvalidOperation */
-            float_raise(float_flag_invalid, status);
-            return float32_default_nan;
-        }
-        /* Otherwise generate an infinity of the same sign */
-        return packFloat32(cSign ^ signflip, 0xff, 0);
-    }
-
-    if (pInf) {
-        return packFloat32(pSign ^ signflip, 0xff, 0);
-    }
-
-    if (pZero) {
-        if (cExp == 0) {
-            if (cSig == 0) {
-                /* Adding two exact zeroes */
-                if (pSign == cSign) {
-                    zSign = pSign;
-                } else if (status->float_rounding_mode == float_round_down) {
-                    zSign = 1;
-                } else {
-                    zSign = 0;
-                }
-                return packFloat32(zSign ^ signflip, 0, 0);
-            }
-            /* Exact zero plus a denorm */
-            if (status->flush_to_zero) {
-                float_raise(float_flag_output_denormal, status);
-                return packFloat32(cSign ^ signflip, 0, 0);
-            }
-        }
-        /* Zero plus something non-zero : just return the something */
-        if (flags & float_muladd_halve_result) {
-            if (cExp == 0) {
-                normalizeFloat32Subnormal(cSig, &cExp, &cSig);
-            }
-            /* Subtract one to halve, and one again because roundAndPackFloat32
-             * wants one less than the true exponent.
-             */
-            cExp -= 2;
-            cSig = (cSig | 0x00800000) << 7;
-            return roundAndPackFloat32(cSign ^ signflip, cExp, cSig, status);
-        }
-        return packFloat32(cSign ^ signflip, cExp, cSig);
-    }
-
-    if (aExp == 0) {
-        normalizeFloat32Subnormal(aSig, &aExp, &aSig);
-    }
-    if (bExp == 0) {
-        normalizeFloat32Subnormal(bSig, &bExp, &bSig);
-    }
-
-    /* Calculate the actual result a * b + c */
-
-    /* Multiply first; this is easy. */
-    /* NB: we subtract 0x7e where float32_mul() subtracts 0x7f
-     * because we want the true exponent, not the "one-less-than"
-     * flavour that roundAndPackFloat32() takes.
-     */
-    pExp = aExp + bExp - 0x7e;
-    aSig = (aSig | 0x00800000) << 7;
-    bSig = (bSig | 0x00800000) << 8;
-    pSig64 = (uint64_t)aSig * bSig;
-    if ((int64_t)(pSig64 << 1) >= 0) {
-        pSig64 <<= 1;
-        pExp--;
-    }
-
-    zSign = pSign ^ signflip;
-
-    /* Now pSig64 is the significand of the multiply, with the explicit bit in
-     * position 62.
-     */
-    if (cExp == 0) {
-        if (!cSig) {
-            /* Throw out the special case of c being an exact zero now */
-            shift64RightJamming(pSig64, 32, &pSig64);
-            pSig = pSig64;
-            if (flags & float_muladd_halve_result) {
-                pExp--;
-            }
-            return roundAndPackFloat32(zSign, pExp - 1,
-                                       pSig, status);
-        }
-        normalizeFloat32Subnormal(cSig, &cExp, &cSig);
-    }
-
-    cSig64 = (uint64_t)cSig << (62 - 23);
-    cSig64 |= LIT64(0x4000000000000000);
-    expDiff = pExp - cExp;
-
-    if (pSign == cSign) {
-        /* Addition */
-        if (expDiff > 0) {
-            /* scale c to match p */
-            shift64RightJamming(cSig64, expDiff, &cSig64);
-            zExp = pExp;
-        } else if (expDiff < 0) {
-            /* scale p to match c */
-            shift64RightJamming(pSig64, -expDiff, &pSig64);
-            zExp = cExp;
-        } else {
-            /* no scaling needed */
-            zExp = cExp;
-        }
-        /* Add significands and make sure explicit bit ends up in posn 62 */
-        zSig64 = pSig64 + cSig64;
-        if ((int64_t)zSig64 < 0) {
-            shift64RightJamming(zSig64, 1, &zSig64);
-        } else {
-            zExp--;
-        }
-    } else {
-        /* Subtraction */
-        if (expDiff > 0) {
-            shift64RightJamming(cSig64, expDiff, &cSig64);
-            zSig64 = pSig64 - cSig64;
-            zExp = pExp;
-        } else if (expDiff < 0) {
-            shift64RightJamming(pSig64, -expDiff, &pSig64);
-            zSig64 = cSig64 - pSig64;
-            zExp = cExp;
-            zSign ^= 1;
-        } else {
-            zExp = pExp;
-            if (cSig64 < pSig64) {
-                zSig64 = pSig64 - cSig64;
-            } else if (pSig64 < cSig64) {
-                zSig64 = cSig64 - pSig64;
-                zSign ^= 1;
-            } else {
-                /* Exact zero */
-                zSign = signflip;
-                if (status->float_rounding_mode == float_round_down) {
-                    zSign ^= 1;
-                }
-                return packFloat32(zSign, 0, 0);
-            }
-        }
-        --zExp;
-        /* Normalize to put the explicit bit back into bit 62. */
-        shiftcount = countLeadingZeros64(zSig64) - 1;
-        zSig64 <<= shiftcount;
-        zExp -= shiftcount;
-    }
-    if (flags & float_muladd_halve_result) {
-        zExp--;
-    }
-
-    shift64RightJamming(zSig64, 32, &zSig64);
-    return roundAndPackFloat32(zSign, zExp, zSig64, status);
-}
-
-
-/*----------------------------------------------------------------------------
-| Returns the square root of the single-precision floating-point value `a'.
-| The operation is performed according to the IEC/IEEE Standard for Binary
-| Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-float32 float32_sqrt(float32 a, float_status *status)
-{
-    flag aSign;
-    int aExp, zExp;
-    uint32_t aSig, zSig;
-    uint64_t rem, term;
-    a = float32_squash_input_denormal(a, status);
-
-    aSig = extractFloat32Frac( a );
-    aExp = extractFloat32Exp( a );
-    aSign = extractFloat32Sign( a );
-    if ( aExp == 0xFF ) {
-        if (aSig) {
-            return propagateFloat32NaN(a, float32_zero, status);
-        }
-        if ( ! aSign ) return a;
-        float_raise(float_flag_invalid, status);
-        return float32_default_nan;
-    }
-    if ( aSign ) {
-        if ( ( aExp | aSig ) == 0 ) return a;
-        float_raise(float_flag_invalid, status);
-        return float32_default_nan;
-    }
-    if ( aExp == 0 ) {
-        if ( aSig == 0 ) return float32_zero;
-        normalizeFloat32Subnormal( aSig, &aExp, &aSig );
-    }
-    zExp = ( ( aExp - 0x7F )>>1 ) + 0x7E;
-    aSig = ( aSig | 0x00800000 )<<8;
-    zSig = estimateSqrt32( aExp, aSig ) + 2;
-    if ( ( zSig & 0x7F ) <= 5 ) {
-        if ( zSig < 2 ) {
-            zSig = 0x7FFFFFFF;
-            goto roundAndPack;
-        }
-        aSig >>= aExp & 1;
-        term = ( (uint64_t) zSig ) * zSig;
-        rem = ( ( (uint64_t) aSig )<<32 ) - term;
-        while ( (int64_t) rem < 0 ) {
-            --zSig;
-            rem += ( ( (uint64_t) zSig )<<1 ) | 1;
-        }
-        zSig |= ( rem != 0 );
-    }
-    shift32RightJamming( zSig, 1, &zSig );
- roundAndPack:
-    return roundAndPackFloat32(0, zExp, zSig, status);
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the binary exponential of the single-precision floating-point value
-| `a'. The operation is performed according to the IEC/IEEE Standard for
-| Binary Floating-Point Arithmetic.
-|
-| Uses the following identities:
-|
-| 1. -------------------------------------------------------------------------
-|      x    x*ln(2)
-|     2  = e
-|
-| 2. -------------------------------------------------------------------------
-|                      2     3     4     5           n
-|      x        x     x     x     x     x           x
-|     e  = 1 + --- + --- + --- + --- + --- + ... + --- + ...
-|               1!    2!    3!    4!    5!          n!
-*----------------------------------------------------------------------------*/
-
-static const float64 float32_exp2_coefficients[15] =
-{
-    const_float64( 0x3ff0000000000000ll ), /*  1 */
-    const_float64( 0x3fe0000000000000ll ), /*  2 */
-    const_float64( 0x3fc5555555555555ll ), /*  3 */
-    const_float64( 0x3fa5555555555555ll ), /*  4 */
-    const_float64( 0x3f81111111111111ll ), /*  5 */
-    const_float64( 0x3f56c16c16c16c17ll ), /*  6 */
-    const_float64( 0x3f2a01a01a01a01all ), /*  7 */
-    const_float64( 0x3efa01a01a01a01all ), /*  8 */
-    const_float64( 0x3ec71de3a556c734ll ), /*  9 */
-    const_float64( 0x3e927e4fb7789f5cll ), /* 10 */
-    const_float64( 0x3e5ae64567f544e4ll ), /* 11 */
-    const_float64( 0x3e21eed8eff8d898ll ), /* 12 */
-    const_float64( 0x3de6124613a86d09ll ), /* 13 */
-    const_float64( 0x3da93974a8c07c9dll ), /* 14 */
-    const_float64( 0x3d6ae7f3e733b81fll ), /* 15 */
-};
-
-float32 float32_exp2(float32 a, float_status *status)
-{
-    flag aSign;
-    int aExp;
-    uint32_t aSig;
-    float64 r, x, xn;
-    int i;
-    a = float32_squash_input_denormal(a, status);
-
-    aSig = extractFloat32Frac( a );
-    aExp = extractFloat32Exp( a );
-    aSign = extractFloat32Sign( a );
-
-    if ( aExp == 0xFF) {
-        if (aSig) {
-            return propagateFloat32NaN(a, float32_zero, status);
-        }
-        return (aSign) ? float32_zero : a;
-    }
-    if (aExp == 0) {
-        if (aSig == 0) return float32_one;
-    }
-
-    float_raise(float_flag_inexact, status);
-
-    /* ******************************* */
-    /* using float64 for approximation */
-    /* ******************************* */
-    x = float32_to_float64(a, status);
-    x = float64_mul(x, float64_ln2, status);
-
-    xn = x;
-    r = float64_one;
-    for (i = 0 ; i < 15 ; i++) {
-        float64 f;
-
-        f = float64_mul(xn, float32_exp2_coefficients[i], status);
-        r = float64_add(r, f, status);
-
-        xn = float64_mul(xn, x, status);
-    }
-
-    return float64_to_float32(r, status);
-}
-
-/*----------------------------------------------------------------------------
-| Returns the binary log of the single-precision floating-point value `a'.
-| The operation is performed according to the IEC/IEEE Standard for Binary
-| Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-float32 float32_log2(float32 a, float_status *status)
-{
-    flag aSign, zSign;
-    int aExp;
-    uint32_t aSig, zSig, i;
-
-    a = float32_squash_input_denormal(a, status);
-    aSig = extractFloat32Frac( a );
-    aExp = extractFloat32Exp( a );
-    aSign = extractFloat32Sign( a );
-
-    if ( aExp == 0 ) {
-        if ( aSig == 0 ) return packFloat32( 1, 0xFF, 0 );
-        normalizeFloat32Subnormal( aSig, &aExp, &aSig );
-    }
-    if ( aSign ) {
-        float_raise(float_flag_invalid, status);
-        return float32_default_nan;
-    }
-    if ( aExp == 0xFF ) {
-        if (aSig) {
-            return propagateFloat32NaN(a, float32_zero, status);
-        }
-        return a;
-    }
-
-    aExp -= 0x7F;
-    aSig |= 0x00800000;
-    zSign = aExp < 0;
-    zSig = aExp << 23;
-
-    for (i = 1 << 22; i > 0; i >>= 1) {
-        aSig = ( (uint64_t)aSig * aSig ) >> 23;
-        if ( aSig & 0x01000000 ) {
-            aSig >>= 1;
-            zSig |= i;
-        }
-    }
-
-    if ( zSign )
-        zSig = -zSig;
-
-    return normalizeRoundAndPackFloat32(zSign, 0x85, zSig, status);
-}
-
-/*----------------------------------------------------------------------------
-| Returns 1 if the single-precision floating-point value `a' is equal to
-| the corresponding value `b', and 0 otherwise.  The invalid exception is
-| raised if either operand is a NaN.  Otherwise, the comparison is performed
-| according to the IEC/IEEE Standard for Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-int float32_eq(float32 a, float32 b, float_status *status)
-{
-    uint32_t av, bv;
-    a = float32_squash_input_denormal(a, status);
-    b = float32_squash_input_denormal(b, status);
-
-    if (    ( ( extractFloat32Exp( a ) == 0xFF ) && extractFloat32Frac( a ) )
-         || ( ( extractFloat32Exp( b ) == 0xFF ) && extractFloat32Frac( b ) )
-       ) {
-        float_raise(float_flag_invalid, status);
-        return 0;
-    }
-    av = float32_val(a);
-    bv = float32_val(b);
-    return ( av == bv ) || ( (uint32_t) ( ( av | bv )<<1 ) == 0 );
-}
-
-/*----------------------------------------------------------------------------
-| Returns 1 if the single-precision floating-point value `a' is less than
-| or equal to the corresponding value `b', and 0 otherwise.  The invalid
-| exception is raised if either operand is a NaN.  The comparison is performed
-| according to the IEC/IEEE Standard for Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-int float32_le(float32 a, float32 b, float_status *status)
-{
-    flag aSign, bSign;
-    uint32_t av, bv;
-    a = float32_squash_input_denormal(a, status);
-    b = float32_squash_input_denormal(b, status);
-
-    if (    ( ( extractFloat32Exp( a ) == 0xFF ) && extractFloat32Frac( a ) )
-         || ( ( extractFloat32Exp( b ) == 0xFF ) && extractFloat32Frac( b ) )
-       ) {
-        float_raise(float_flag_invalid, status);
-        return 0;
-    }
-    aSign = extractFloat32Sign( a );
-    bSign = extractFloat32Sign( b );
-    av = float32_val(a);
-    bv = float32_val(b);
-    if ( aSign != bSign ) return aSign || ( (uint32_t) ( ( av | bv )<<1 ) == 0 );
-    return ( av == bv ) || ( aSign ^ ( av < bv ) );
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns 1 if the single-precision floating-point value `a' is less than
-| the corresponding value `b', and 0 otherwise.  The invalid exception is
-| raised if either operand is a NaN.  The comparison is performed according
-| to the IEC/IEEE Standard for Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-int float32_lt(float32 a, float32 b, float_status *status)
-{
-    flag aSign, bSign;
-    uint32_t av, bv;
-    a = float32_squash_input_denormal(a, status);
-    b = float32_squash_input_denormal(b, status);
-
-    if (    ( ( extractFloat32Exp( a ) == 0xFF ) && extractFloat32Frac( a ) )
-         || ( ( extractFloat32Exp( b ) == 0xFF ) && extractFloat32Frac( b ) )
-       ) {
-        float_raise(float_flag_invalid, status);
-        return 0;
-    }
-    aSign = extractFloat32Sign( a );
-    bSign = extractFloat32Sign( b );
-    av = float32_val(a);
-    bv = float32_val(b);
-    if ( aSign != bSign ) return aSign && ( (uint32_t) ( ( av | bv )<<1 ) != 0 );
-    return ( av != bv ) && ( aSign ^ ( av < bv ) );
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns 1 if the single-precision floating-point values `a' and `b' cannot
-| be compared, and 0 otherwise.  The invalid exception is raised if either
-| operand is a NaN.  The comparison is performed according to the IEC/IEEE
-| Standard for Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-int float32_unordered(float32 a, float32 b, float_status *status)
-{
-    a = float32_squash_input_denormal(a, status);
-    b = float32_squash_input_denormal(b, status);
-
-    if (    ( ( extractFloat32Exp( a ) == 0xFF ) && extractFloat32Frac( a ) )
-         || ( ( extractFloat32Exp( b ) == 0xFF ) && extractFloat32Frac( b ) )
-       ) {
-        float_raise(float_flag_invalid, status);
-        return 1;
-    }
-    return 0;
-}
-
-/*----------------------------------------------------------------------------
-| Returns 1 if the single-precision floating-point value `a' is equal to
-| the corresponding value `b', and 0 otherwise.  Quiet NaNs do not cause an
-| exception.  The comparison is performed according to the IEC/IEEE Standard
-| for Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-int float32_eq_quiet(float32 a, float32 b, float_status *status)
-{
-    a = float32_squash_input_denormal(a, status);
-    b = float32_squash_input_denormal(b, status);
-
-    if (    ( ( extractFloat32Exp( a ) == 0xFF ) && extractFloat32Frac( a ) )
-         || ( ( extractFloat32Exp( b ) == 0xFF ) && extractFloat32Frac( b ) )
-       ) {
-        if ( float32_is_signaling_nan( a ) || float32_is_signaling_nan( b ) ) {
-            float_raise(float_flag_invalid, status);
-        }
-        return 0;
-    }
-    return ( float32_val(a) == float32_val(b) ) ||
-            ( (uint32_t) ( ( float32_val(a) | float32_val(b) )<<1 ) == 0 );
-}
-
-/*----------------------------------------------------------------------------
-| Returns 1 if the single-precision floating-point value `a' is less than or
-| equal to the corresponding value `b', and 0 otherwise.  Quiet NaNs do not
-| cause an exception.  Otherwise, the comparison is performed according to the
-| IEC/IEEE Standard for Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-int float32_le_quiet(float32 a, float32 b, float_status *status)
-{
-    flag aSign, bSign;
-    uint32_t av, bv;
-    a = float32_squash_input_denormal(a, status);
-    b = float32_squash_input_denormal(b, status);
-
-    if (    ( ( extractFloat32Exp( a ) == 0xFF ) && extractFloat32Frac( a ) )
-         || ( ( extractFloat32Exp( b ) == 0xFF ) && extractFloat32Frac( b ) )
-       ) {
-        if ( float32_is_signaling_nan( a ) || float32_is_signaling_nan( b ) ) {
-            float_raise(float_flag_invalid, status);
-        }
-        return 0;
-    }
-    aSign = extractFloat32Sign( a );
-    bSign = extractFloat32Sign( b );
-    av = float32_val(a);
-    bv = float32_val(b);
-    if ( aSign != bSign ) return aSign || ( (uint32_t) ( ( av | bv )<<1 ) == 0 );
-    return ( av == bv ) || ( aSign ^ ( av < bv ) );
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns 1 if the single-precision floating-point value `a' is less than
-| the corresponding value `b', and 0 otherwise.  Quiet NaNs do not cause an
-| exception.  Otherwise, the comparison is performed according to the IEC/IEEE
-| Standard for Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-int float32_lt_quiet(float32 a, float32 b, float_status *status)
-{
-    flag aSign, bSign;
-    uint32_t av, bv;
-    a = float32_squash_input_denormal(a, status);
-    b = float32_squash_input_denormal(b, status);
-
-    if (    ( ( extractFloat32Exp( a ) == 0xFF ) && extractFloat32Frac( a ) )
-         || ( ( extractFloat32Exp( b ) == 0xFF ) && extractFloat32Frac( b ) )
-       ) {
-        if ( float32_is_signaling_nan( a ) || float32_is_signaling_nan( b ) ) {
-            float_raise(float_flag_invalid, status);
-        }
-        return 0;
-    }
-    aSign = extractFloat32Sign( a );
-    bSign = extractFloat32Sign( b );
-    av = float32_val(a);
-    bv = float32_val(b);
-    if ( aSign != bSign ) return aSign && ( (uint32_t) ( ( av | bv )<<1 ) != 0 );
-    return ( av != bv ) && ( aSign ^ ( av < bv ) );
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns 1 if the single-precision floating-point values `a' and `b' cannot
-| be compared, and 0 otherwise.  Quiet NaNs do not cause an exception.  The
-| comparison is performed according to the IEC/IEEE Standard for Binary
-| Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-int float32_unordered_quiet(float32 a, float32 b, float_status *status)
-{
-    a = float32_squash_input_denormal(a, status);
-    b = float32_squash_input_denormal(b, status);
-
-    if (    ( ( extractFloat32Exp( a ) == 0xFF ) && extractFloat32Frac( a ) )
-         || ( ( extractFloat32Exp( b ) == 0xFF ) && extractFloat32Frac( b ) )
-       ) {
-        if ( float32_is_signaling_nan( a ) || float32_is_signaling_nan( b ) ) {
-            float_raise(float_flag_invalid, status);
-        }
-        return 1;
-    }
-    return 0;
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of converting the double-precision floating-point value
-| `a' to the 32-bit two's complement integer format.  The conversion is
-| performed according to the IEC/IEEE Standard for Binary Floating-Point
-| Arithmetic---which means in particular that the conversion is rounded
-| according to the current rounding mode.  If `a' is a NaN, the largest
-| positive integer is returned.  Otherwise, if the conversion overflows, the
-| largest integer with the same sign as `a' is returned.
-*----------------------------------------------------------------------------*/
-
-int32_t float64_to_int32(float64 a, float_status *status)
-{
-    flag aSign;
-    int aExp;
-    int shiftCount;
-    uint64_t aSig;
-    a = float64_squash_input_denormal(a, status);
-
-    aSig = extractFloat64Frac( a );
-    aExp = extractFloat64Exp( a );
-    aSign = extractFloat64Sign( a );
-    if ( ( aExp == 0x7FF ) && aSig ) aSign = 0;
-    if ( aExp ) aSig |= LIT64( 0x0010000000000000 );
-    shiftCount = 0x42C - aExp;
-    if ( 0 < shiftCount ) shift64RightJamming( aSig, shiftCount, &aSig );
-    return roundAndPackInt32(aSign, aSig, status);
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of converting the double-precision floating-point value
-| `a' to the 32-bit two's complement integer format.  The conversion is
-| performed according to the IEC/IEEE Standard for Binary Floating-Point
-| Arithmetic, except that the conversion is always rounded toward zero.
-| If `a' is a NaN, the largest positive integer is returned.  Otherwise, if
-| the conversion overflows, the largest integer with the same sign as `a' is
-| returned.
-*----------------------------------------------------------------------------*/
-
-int32_t float64_to_int32_round_to_zero(float64 a, float_status *status)
-{
-    flag aSign;
-    int aExp;
-    int shiftCount;
-    uint64_t aSig, savedASig;
-    int32_t z;
-    a = float64_squash_input_denormal(a, status);
-
-    aSig = extractFloat64Frac( a );
-    aExp = extractFloat64Exp( a );
-    aSign = extractFloat64Sign( a );
-    if ( 0x41E < aExp ) {
-        if ( ( aExp == 0x7FF ) && aSig ) aSign = 0;
-        goto invalid;
-    }
-    else if ( aExp < 0x3FF ) {
-        if (aExp || aSig) {
-            status->float_exception_flags |= float_flag_inexact;
-        }
-        return 0;
-    }
-    aSig |= LIT64( 0x0010000000000000 );
-    shiftCount = 0x433 - aExp;
-    savedASig = aSig;
-    aSig >>= shiftCount;
-    z = aSig;
-    if ( aSign ) z = - z;
-    if ( ( z < 0 ) ^ aSign ) {
- invalid:
-        float_raise(float_flag_invalid, status);
-        return aSign ? (int32_t) 0x80000000 : 0x7FFFFFFF;
-    }
-    if ( ( aSig<<shiftCount ) != savedASig ) {
-        status->float_exception_flags |= float_flag_inexact;
-    }
-    return z;
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of converting the double-precision floating-point value
-| `a' to the 16-bit two's complement integer format.  The conversion is
-| performed according to the IEC/IEEE Standard for Binary Floating-Point
-| Arithmetic, except that the conversion is always rounded toward zero.
-| If `a' is a NaN, the largest positive integer is returned.  Otherwise, if
-| the conversion overflows, the largest integer with the same sign as `a' is
-| returned.
-*----------------------------------------------------------------------------*/
-
-int16_t float64_to_int16_round_to_zero(float64 a, float_status *status)
-{
-    flag aSign;
-    int aExp;
-    int shiftCount;
-    uint64_t aSig, savedASig;
-    int32_t z;
-
-    aSig = extractFloat64Frac( a );
-    aExp = extractFloat64Exp( a );
-    aSign = extractFloat64Sign( a );
-    if ( 0x40E < aExp ) {
-        if ( ( aExp == 0x7FF ) && aSig ) {
-            aSign = 0;
-        }
-        goto invalid;
-    }
-    else if ( aExp < 0x3FF ) {
-        if ( aExp || aSig ) {
-            status->float_exception_flags |= float_flag_inexact;
-        }
-        return 0;
-    }
-    aSig |= LIT64( 0x0010000000000000 );
-    shiftCount = 0x433 - aExp;
-    savedASig = aSig;
-    aSig >>= shiftCount;
-    z = aSig;
-    if ( aSign ) {
-        z = - z;
-    }
-    if ( ( (int16_t)z < 0 ) ^ aSign ) {
- invalid:
-        float_raise(float_flag_invalid, status);
-        return aSign ? (int32_t) 0xffff8000 : 0x7FFF;
-    }
-    if ( ( aSig<<shiftCount ) != savedASig ) {
-        status->float_exception_flags |= float_flag_inexact;
-    }
-    return z;
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of converting the double-precision floating-point value
-| `a' to the 64-bit two's complement integer format.  The conversion is
-| performed according to the IEC/IEEE Standard for Binary Floating-Point
-| Arithmetic---which means in particular that the conversion is rounded
-| according to the current rounding mode.  If `a' is a NaN, the largest
-| positive integer is returned.  Otherwise, if the conversion overflows, the
-| largest integer with the same sign as `a' is returned.
-*----------------------------------------------------------------------------*/
-
-int64_t float64_to_int64(float64 a, float_status *status)
-{
-    flag aSign;
-    int aExp;
-    int shiftCount;
-    uint64_t aSig, aSigExtra;
-    a = float64_squash_input_denormal(a, status);
-
-    aSig = extractFloat64Frac( a );
-    aExp = extractFloat64Exp( a );
-    aSign = extractFloat64Sign( a );
-    if ( aExp ) aSig |= LIT64( 0x0010000000000000 );
-    shiftCount = 0x433 - aExp;
-    if ( shiftCount <= 0 ) {
-        if ( 0x43E < aExp ) {
-            float_raise(float_flag_invalid, status);
-            if (    ! aSign
-                 || (    ( aExp == 0x7FF )
-                      && ( aSig != LIT64( 0x0010000000000000 ) ) )
-               ) {
-                return LIT64( 0x7FFFFFFFFFFFFFFF );
-            }
-            return (int64_t) LIT64( 0x8000000000000000 );
-        }
-        aSigExtra = 0;
-        aSig <<= - shiftCount;
-    }
-    else {
-        shift64ExtraRightJamming( aSig, 0, shiftCount, &aSig, &aSigExtra );
-    }
-    return roundAndPackInt64(aSign, aSig, aSigExtra, status);
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of converting the double-precision floating-point value
-| `a' to the 64-bit two's complement integer format.  The conversion is
-| performed according to the IEC/IEEE Standard for Binary Floating-Point
-| Arithmetic, except that the conversion is always rounded toward zero.
-| If `a' is a NaN, the largest positive integer is returned.  Otherwise, if
-| the conversion overflows, the largest integer with the same sign as `a' is
-| returned.
-*----------------------------------------------------------------------------*/
-
-int64_t float64_to_int64_round_to_zero(float64 a, float_status *status)
-{
-    flag aSign;
-    int aExp;
-    int shiftCount;
-    uint64_t aSig;
-    int64_t z;
-    a = float64_squash_input_denormal(a, status);
-
-    aSig = extractFloat64Frac( a );
-    aExp = extractFloat64Exp( a );
-    aSign = extractFloat64Sign( a );
-    if ( aExp ) aSig |= LIT64( 0x0010000000000000 );
-    shiftCount = aExp - 0x433;
-    if ( 0 <= shiftCount ) {
-        if ( 0x43E <= aExp ) {
-            if ( float64_val(a) != LIT64( 0xC3E0000000000000 ) ) {
-                float_raise(float_flag_invalid, status);
-                if (    ! aSign
-                     || (    ( aExp == 0x7FF )
-                          && ( aSig != LIT64( 0x0010000000000000 ) ) )
-                   ) {
-                    return LIT64( 0x7FFFFFFFFFFFFFFF );
-                }
-            }
-            return (int64_t) LIT64( 0x8000000000000000 );
-        }
-        z = aSig<<shiftCount;
-    }
-    else {
-        if ( aExp < 0x3FE ) {
-            if (aExp | aSig) {
-                status->float_exception_flags |= float_flag_inexact;
-            }
-            return 0;
-        }
-        z = aSig>>( - shiftCount );
-        if ( (uint64_t) ( aSig<<( shiftCount & 63 ) ) ) {
-            status->float_exception_flags |= float_flag_inexact;
-        }
-    }
-    if ( aSign ) z = - z;
-    return z;
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of converting the double-precision floating-point value
-| `a' to the single-precision floating-point format.  The conversion is
-| performed according to the IEC/IEEE Standard for Binary Floating-Point
-| Arithmetic.
-*----------------------------------------------------------------------------*/
-
-float32 float64_to_float32(float64 a, float_status *status)
-{
-    flag aSign;
-    int aExp;
-    uint64_t aSig;
-    uint32_t zSig;
-    a = float64_squash_input_denormal(a, status);
-
-    aSig = extractFloat64Frac( a );
-    aExp = extractFloat64Exp( a );
-    aSign = extractFloat64Sign( a );
-    if ( aExp == 0x7FF ) {
-        if (aSig) {
-            return commonNaNToFloat32(float64ToCommonNaN(a, status), status);
-        }
-        return packFloat32( aSign, 0xFF, 0 );
-    }
-    shift64RightJamming( aSig, 22, &aSig );
-    zSig = aSig;
-    if ( aExp || zSig ) {
-        zSig |= 0x40000000;
-        aExp -= 0x381;
-    }
-    return roundAndPackFloat32(aSign, aExp, zSig, status);
-
-}
-
-
-/*----------------------------------------------------------------------------
-| Packs the sign `zSign', exponent `zExp', and significand `zSig' into a
-| half-precision floating-point value, returning the result.  After being
-| shifted into the proper positions, the three fields are simply added
-| together to form the result.  This means that any integer portion of `zSig'
-| will be added into the exponent.  Since a properly normalized significand
-| will have an integer portion equal to 1, the `zExp' input should be 1 less
-| than the desired result exponent whenever `zSig' is a complete, normalized
-| significand.
-*----------------------------------------------------------------------------*/
-static float16 packFloat16(flag zSign, int zExp, uint16_t zSig)
-{
-    return make_float16(
-        (((uint32_t)zSign) << 15) + (((uint32_t)zExp) << 10) + zSig);
-}
-
-/*----------------------------------------------------------------------------
-| Takes an abstract floating-point value having sign `zSign', exponent `zExp',
-| and significand `zSig', and returns the proper half-precision floating-
-| point value corresponding to the abstract input.  Ordinarily, the abstract
-| value is simply rounded and packed into the half-precision format, with
-| the inexact exception raised if the abstract input cannot be represented
-| exactly.  However, if the abstract value is too large, the overflow and
-| inexact exceptions are raised and an infinity or maximal finite value is
-| returned.  If the abstract value is too small, the input value is rounded to
-| a subnormal number, and the underflow and inexact exceptions are raised if
-| the abstract input cannot be represented exactly as a subnormal half-
-| precision floating-point number.
-| The `ieee' flag indicates whether to use IEEE standard half precision, or
-| ARM-style "alternative representation", which omits the NaN and Inf
-| encodings in order to raise the maximum representable exponent by one.
-|     The input significand `zSig' has its binary point between bits 22
-| and 23, which is 13 bits to the left of the usual location.  This shifted
-| significand must be normalized or smaller.  If `zSig' is not normalized,
-| `zExp' must be 0; in that case, the result returned is a subnormal number,
-| and it must not require rounding.  In the usual case that `zSig' is
-| normalized, `zExp' must be 1 less than the ``true'' floating-point exponent.
-| Note the slightly odd position of the binary point in zSig compared with the
-| other roundAndPackFloat functions. This should probably be fixed if we
-| need to implement more float16 routines than just conversion.
-| The handling of underflow and overflow follows the IEC/IEEE Standard for
-| Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-static float16 roundAndPackFloat16(flag zSign, int zExp,
-                                   uint32_t zSig, flag ieee,
-                                   float_status *status)
-{
-    int maxexp = ieee ? 29 : 30;
-    uint32_t mask;
-    uint32_t increment;
-    bool rounding_bumps_exp;
-    bool is_tiny = false;
-
-    /* Calculate the mask of bits of the mantissa which are not
-     * representable in half-precision and will be lost.
-     */
-    if (zExp < 1) {
-        /* Will be denormal in halfprec */
-        mask = 0x00ffffff;
-        if (zExp >= -11) {
-            mask >>= 11 + zExp;
-        }
-    } else {
-        /* Normal number in halfprec */
-        mask = 0x00001fff;
-    }
-
-    switch (status->float_rounding_mode) {
-    case float_round_nearest_even:
-        increment = (mask + 1) >> 1;
-        if ((zSig & mask) == increment) {
-            increment = zSig & (increment << 1);
-        }
-        break;
-    case float_round_ties_away:
-        increment = (mask + 1) >> 1;
-        break;
-    case float_round_up:
-        increment = zSign ? 0 : mask;
-        break;
-    case float_round_down:
-        increment = zSign ? mask : 0;
-        break;
-    default: /* round_to_zero */
-        increment = 0;
-        break;
-    }
-
-    rounding_bumps_exp = (zSig + increment >= 0x01000000);
-
-    if (zExp > maxexp || (zExp == maxexp && rounding_bumps_exp)) {
-        if (ieee) {
-            float_raise(float_flag_overflow | float_flag_inexact, status);
-            return packFloat16(zSign, 0x1f, 0);
-        } else {
-            float_raise(float_flag_invalid, status);
-            return packFloat16(zSign, 0x1f, 0x3ff);
-        }
-    }
-
-    if (zExp < 0) {
-        /* Note that flush-to-zero does not affect half-precision results */
-        is_tiny =
-            (status->float_detect_tininess == float_tininess_before_rounding)
-            || (zExp < -1)
-            || (!rounding_bumps_exp);
-    }
-    if (zSig & mask) {
-        float_raise(float_flag_inexact, status);
-        if (is_tiny) {
-            float_raise(float_flag_underflow, status);
-        }
-    }
-
-    zSig += increment;
-    if (rounding_bumps_exp) {
-        zSig >>= 1;
-        zExp++;
-    }
-
-    if (zExp < -10) {
-        return packFloat16(zSign, 0, 0);
-    }
-    if (zExp < 0) {
-        zSig >>= -zExp;
-        zExp = 0;
-    }
-    return packFloat16(zSign, zExp, zSig >> 13);
-}
-
-static void normalizeFloat16Subnormal(uint32_t aSig, int *zExpPtr,
-                                      uint32_t *zSigPtr)
-{
-    int8_t shiftCount = countLeadingZeros32(aSig) - 21;
-    *zSigPtr = aSig << shiftCount;
-    *zExpPtr = 1 - shiftCount;
-}
-
-/* Half precision floats come in two formats: standard IEEE and "ARM" format.
-   The latter gains extra exponent range by omitting the NaN/Inf encodings.  */
-
-float32 float16_to_float32(float16 a, flag ieee, float_status *status)
-{
-    flag aSign;
-    int aExp;
-    uint32_t aSig;
-
-    aSign = extractFloat16Sign(a);
-    aExp = extractFloat16Exp(a);
-    aSig = extractFloat16Frac(a);
-
-    if (aExp == 0x1f && ieee) {
-        if (aSig) {
-            return commonNaNToFloat32(float16ToCommonNaN(a, status), status);
-        }
-        return packFloat32(aSign, 0xff, 0);
-    }
-    if (aExp == 0) {
-        if (aSig == 0) {
-            return packFloat32(aSign, 0, 0);
-        }
-
-        normalizeFloat16Subnormal(aSig, &aExp, &aSig);
-        aExp--;
-    }
-    return packFloat32( aSign, aExp + 0x70, aSig << 13);
-}
-
-float16 float32_to_float16(float32 a, flag ieee, float_status *status)
-{
-    flag aSign;
-    int aExp;
-    uint32_t aSig;
-
-    a = float32_squash_input_denormal(a, status);
-
-    aSig = extractFloat32Frac( a );
-    aExp = extractFloat32Exp( a );
-    aSign = extractFloat32Sign( a );
-    if ( aExp == 0xFF ) {
-        if (aSig) {
-            /* Input is a NaN */
-            if (!ieee) {
-                float_raise(float_flag_invalid, status);
-                return packFloat16(aSign, 0, 0);
-            }
-            return commonNaNToFloat16(
-                float32ToCommonNaN(a, status), status);
-        }
-        /* Infinity */
-        if (!ieee) {
-            float_raise(float_flag_invalid, status);
-            return packFloat16(aSign, 0x1f, 0x3ff);
-        }
-        return packFloat16(aSign, 0x1f, 0);
-    }
-    if (aExp == 0 && aSig == 0) {
-        return packFloat16(aSign, 0, 0);
-    }
-    /* Decimal point between bits 22 and 23. Note that we add the 1 bit
-     * even if the input is denormal; however this is harmless because
-     * the largest possible single-precision denormal is still smaller
-     * than the smallest representable half-precision denormal, and so we
-     * will end up ignoring aSig and returning via the "always return zero"
-     * codepath.
-     */
-    aSig |= 0x00800000;
-    aExp -= 0x71;
-
-    return roundAndPackFloat16(aSign, aExp, aSig, ieee, status);
-}
-
-float64 float16_to_float64(float16 a, flag ieee, float_status *status)
-{
-    flag aSign;
-    int aExp;
-    uint32_t aSig;
-
-    aSign = extractFloat16Sign(a);
-    aExp = extractFloat16Exp(a);
-    aSig = extractFloat16Frac(a);
-
-    if (aExp == 0x1f && ieee) {
-        if (aSig) {
-            return commonNaNToFloat64(
-                float16ToCommonNaN(a, status), status);
-        }
-        return packFloat64(aSign, 0x7ff, 0);
-    }
-    if (aExp == 0) {
-        if (aSig == 0) {
-            return packFloat64(aSign, 0, 0);
-        }
-
-        normalizeFloat16Subnormal(aSig, &aExp, &aSig);
-        aExp--;
-    }
-    return packFloat64(aSign, aExp + 0x3f0, ((uint64_t)aSig) << 42);
-}
-
-float16 float64_to_float16(float64 a, flag ieee, float_status *status)
-{
-    flag aSign;
-    int aExp;
-    uint64_t aSig;
-    uint32_t zSig;
-
-    a = float64_squash_input_denormal(a, status);
-
-    aSig = extractFloat64Frac(a);
-    aExp = extractFloat64Exp(a);
-    aSign = extractFloat64Sign(a);
-    if (aExp == 0x7FF) {
-        if (aSig) {
-            /* Input is a NaN */
-            if (!ieee) {
-                float_raise(float_flag_invalid, status);
-                return packFloat16(aSign, 0, 0);
-            }
-            return commonNaNToFloat16(
-                float64ToCommonNaN(a, status), status);
-        }
-        /* Infinity */
-        if (!ieee) {
-            float_raise(float_flag_invalid, status);
-            return packFloat16(aSign, 0x1f, 0x3ff);
-        }
-        return packFloat16(aSign, 0x1f, 0);
-    }
-    shift64RightJamming(aSig, 29, &aSig);
-    zSig = aSig;
-    if (aExp == 0 && zSig == 0) {
-        return packFloat16(aSign, 0, 0);
-    }
-    /* Decimal point between bits 22 and 23. Note that we add the 1 bit
-     * even if the input is denormal; however this is harmless because
-     * the largest possible single-precision denormal is still smaller
-     * than the smallest representable half-precision denormal, and so we
-     * will end up ignoring aSig and returning via the "always return zero"
-     * codepath.
-     */
-    zSig |= 0x00800000;
-    aExp -= 0x3F1;
-
-    return roundAndPackFloat16(aSign, aExp, zSig, ieee, status);
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of converting the double-precision floating-point value
-| `a' to the extended double-precision floating-point format.  The conversion
-| is performed according to the IEC/IEEE Standard for Binary Floating-Point
-| Arithmetic.
-*----------------------------------------------------------------------------*/
-
-floatx80 float64_to_floatx80(float64 a, float_status *status)
-{
-    flag aSign;
-    int aExp;
-    uint64_t aSig;
-
-    a = float64_squash_input_denormal(a, status);
-    aSig = extractFloat64Frac( a );
-    aExp = extractFloat64Exp( a );
-    aSign = extractFloat64Sign( a );
-    if ( aExp == 0x7FF ) {
-        if (aSig) {
-            return commonNaNToFloatx80(float64ToCommonNaN(a, status), status);
-        }
-        return packFloatx80( aSign, 0x7FFF, LIT64( 0x8000000000000000 ) );
-    }
-    if ( aExp == 0 ) {
-        if ( aSig == 0 ) return packFloatx80( aSign, 0, 0 );
-        normalizeFloat64Subnormal( aSig, &aExp, &aSig );
-    }
-    return
-        packFloatx80(
-            aSign, aExp + 0x3C00, ( aSig | LIT64( 0x0010000000000000 ) )<<11 );
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of converting the double-precision floating-point value
-| `a' to the quadruple-precision floating-point format.  The conversion is
-| performed according to the IEC/IEEE Standard for Binary Floating-Point
-| Arithmetic.
-*----------------------------------------------------------------------------*/
-
-float128 float64_to_float128(float64 a, float_status *status)
-{
-    flag aSign;
-    int aExp;
-    uint64_t aSig, zSig0, zSig1;
-
-    a = float64_squash_input_denormal(a, status);
-    aSig = extractFloat64Frac( a );
-    aExp = extractFloat64Exp( a );
-    aSign = extractFloat64Sign( a );
-    if ( aExp == 0x7FF ) {
-        if (aSig) {
-            return commonNaNToFloat128(float64ToCommonNaN(a, status), status);
-        }
-        return packFloat128( aSign, 0x7FFF, 0, 0 );
-    }
-    if ( aExp == 0 ) {
-        if ( aSig == 0 ) return packFloat128( aSign, 0, 0, 0 );
-        normalizeFloat64Subnormal( aSig, &aExp, &aSig );
-        --aExp;
-    }
-    shift128Right( aSig, 0, 4, &zSig0, &zSig1 );
-    return packFloat128( aSign, aExp + 0x3C00, zSig0, zSig1 );
-
-}
-
-/*----------------------------------------------------------------------------
-| Rounds the double-precision floating-point value `a' to an integer, and
-| returns the result as a double-precision floating-point value.  The
-| operation is performed according to the IEC/IEEE Standard for Binary
-| Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-float64 float64_round_to_int(float64 a, float_status *status)
-{
-    flag aSign;
-    int aExp;
-    uint64_t lastBitMask, roundBitsMask;
-    uint64_t z;
-    a = float64_squash_input_denormal(a, status);
-
-    aExp = extractFloat64Exp( a );
-    if ( 0x433 <= aExp ) {
-        if ( ( aExp == 0x7FF ) && extractFloat64Frac( a ) ) {
-            return propagateFloat64NaN(a, a, status);
-        }
-        return a;
-    }
-    if ( aExp < 0x3FF ) {
-        if ( (uint64_t) ( float64_val(a)<<1 ) == 0 ) return a;
-        status->float_exception_flags |= float_flag_inexact;
-        aSign = extractFloat64Sign( a );
-        switch (status->float_rounding_mode) {
-         case float_round_nearest_even:
-            if ( ( aExp == 0x3FE ) && extractFloat64Frac( a ) ) {
-                return packFloat64( aSign, 0x3FF, 0 );
-            }
-            break;
-        case float_round_ties_away:
-            if (aExp == 0x3FE) {
-                return packFloat64(aSign, 0x3ff, 0);
-            }
-            break;
-         case float_round_down:
-            return make_float64(aSign ? LIT64( 0xBFF0000000000000 ) : 0);
-         case float_round_up:
-            return make_float64(
-            aSign ? LIT64( 0x8000000000000000 ) : LIT64( 0x3FF0000000000000 ));
-        }
-        return packFloat64( aSign, 0, 0 );
-    }
-    lastBitMask = 1;
-    lastBitMask <<= 0x433 - aExp;
-    roundBitsMask = lastBitMask - 1;
-    z = float64_val(a);
-    switch (status->float_rounding_mode) {
-    case float_round_nearest_even:
-        z += lastBitMask >> 1;
-        if ((z & roundBitsMask) == 0) {
-            z &= ~lastBitMask;
-        }
-        break;
-    case float_round_ties_away:
-        z += lastBitMask >> 1;
-        break;
-    case float_round_to_zero:
-        break;
-    case float_round_up:
-        if (!extractFloat64Sign(make_float64(z))) {
-            z += roundBitsMask;
-        }
-        break;
-    case float_round_down:
-        if (extractFloat64Sign(make_float64(z))) {
-            z += roundBitsMask;
-        }
-        break;
-    default:
-        abort();
-    }
-    z &= ~ roundBitsMask;
-    if (z != float64_val(a)) {
-        status->float_exception_flags |= float_flag_inexact;
-    }
-    return make_float64(z);
-
-}
-
-float64 float64_trunc_to_int(float64 a, float_status *status)
-{
-    int oldmode;
-    float64 res;
-    oldmode = status->float_rounding_mode;
-    status->float_rounding_mode = float_round_to_zero;
-    res = float64_round_to_int(a, status);
-    status->float_rounding_mode = oldmode;
-    return res;
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of adding the absolute values of the double-precision
-| floating-point values `a' and `b'.  If `zSign' is 1, the sum is negated
-| before being returned.  `zSign' is ignored if the result is a NaN.
-| The addition is performed according to the IEC/IEEE Standard for Binary
-| Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-static float64 addFloat64Sigs(float64 a, float64 b, flag zSign,
-                              float_status *status)
-{
-    int aExp, bExp, zExp;
-    uint64_t aSig, bSig, zSig;
-    int expDiff;
-
-    aSig = extractFloat64Frac( a );
-    aExp = extractFloat64Exp( a );
-    bSig = extractFloat64Frac( b );
-    bExp = extractFloat64Exp( b );
-    expDiff = aExp - bExp;
-    aSig <<= 9;
-    bSig <<= 9;
-    if ( 0 < expDiff ) {
-        if ( aExp == 0x7FF ) {
-            if (aSig) {
-                return propagateFloat64NaN(a, b, status);
-            }
-            return a;
-        }
-        if ( bExp == 0 ) {
-            --expDiff;
-        }
-        else {
-            bSig |= LIT64( 0x2000000000000000 );
-        }
-        shift64RightJamming( bSig, expDiff, &bSig );
-        zExp = aExp;
-    }
-    else if ( expDiff < 0 ) {
-        if ( bExp == 0x7FF ) {
-            if (bSig) {
-                return propagateFloat64NaN(a, b, status);
-            }
-            return packFloat64( zSign, 0x7FF, 0 );
-        }
-        if ( aExp == 0 ) {
-            ++expDiff;
-        }
-        else {
-            aSig |= LIT64( 0x2000000000000000 );
-        }
-        shift64RightJamming( aSig, - expDiff, &aSig );
-        zExp = bExp;
-    }
-    else {
-        if ( aExp == 0x7FF ) {
-            if (aSig | bSig) {
-                return propagateFloat64NaN(a, b, status);
-            }
-            return a;
-        }
-        if ( aExp == 0 ) {
-            if (status->flush_to_zero) {
-                if (aSig | bSig) {
-                    float_raise(float_flag_output_denormal, status);
-                }
-                return packFloat64(zSign, 0, 0);
-            }
-            return packFloat64( zSign, 0, ( aSig + bSig )>>9 );
-        }
-        zSig = LIT64( 0x4000000000000000 ) + aSig + bSig;
-        zExp = aExp;
-        goto roundAndPack;
-    }
-    aSig |= LIT64( 0x2000000000000000 );
-    zSig = ( aSig + bSig )<<1;
-    --zExp;
-    if ( (int64_t) zSig < 0 ) {
-        zSig = aSig + bSig;
-        ++zExp;
-    }
- roundAndPack:
-    return roundAndPackFloat64(zSign, zExp, zSig, status);
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of subtracting the absolute values of the double-
-| precision floating-point values `a' and `b'.  If `zSign' is 1, the
-| difference is negated before being returned.  `zSign' is ignored if the
-| result is a NaN.  The subtraction is performed according to the IEC/IEEE
-| Standard for Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-static float64 subFloat64Sigs(float64 a, float64 b, flag zSign,
-                              float_status *status)
-{
-    int aExp, bExp, zExp;
-    uint64_t aSig, bSig, zSig;
-    int expDiff;
-
-    aSig = extractFloat64Frac( a );
-    aExp = extractFloat64Exp( a );
-    bSig = extractFloat64Frac( b );
-    bExp = extractFloat64Exp( b );
-    expDiff = aExp - bExp;
-    aSig <<= 10;
-    bSig <<= 10;
-    if ( 0 < expDiff ) goto aExpBigger;
-    if ( expDiff < 0 ) goto bExpBigger;
-    if ( aExp == 0x7FF ) {
-        if (aSig | bSig) {
-            return propagateFloat64NaN(a, b, status);
-        }
-        float_raise(float_flag_invalid, status);
-        return float64_default_nan;
-    }
-    if ( aExp == 0 ) {
-        aExp = 1;
-        bExp = 1;
-    }
-    if ( bSig < aSig ) goto aBigger;
-    if ( aSig < bSig ) goto bBigger;
-    return packFloat64(status->float_rounding_mode == float_round_down, 0, 0);
- bExpBigger:
-    if ( bExp == 0x7FF ) {
-        if (bSig) {
-            return propagateFloat64NaN(a, b, status);
-        }
-        return packFloat64( zSign ^ 1, 0x7FF, 0 );
-    }
-    if ( aExp == 0 ) {
-        ++expDiff;
-    }
-    else {
-        aSig |= LIT64( 0x4000000000000000 );
-    }
-    shift64RightJamming( aSig, - expDiff, &aSig );
-    bSig |= LIT64( 0x4000000000000000 );
- bBigger:
-    zSig = bSig - aSig;
-    zExp = bExp;
-    zSign ^= 1;
-    goto normalizeRoundAndPack;
- aExpBigger:
-    if ( aExp == 0x7FF ) {
-        if (aSig) {
-            return propagateFloat64NaN(a, b, status);
-        }
-        return a;
-    }
-    if ( bExp == 0 ) {
-        --expDiff;
-    }
-    else {
-        bSig |= LIT64( 0x4000000000000000 );
-    }
-    shift64RightJamming( bSig, expDiff, &bSig );
-    aSig |= LIT64( 0x4000000000000000 );
- aBigger:
-    zSig = aSig - bSig;
-    zExp = aExp;
- normalizeRoundAndPack:
-    --zExp;
-    return normalizeRoundAndPackFloat64(zSign, zExp, zSig, status);
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of adding the double-precision floating-point values `a'
-| and `b'.  The operation is performed according to the IEC/IEEE Standard for
-| Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-float64 float64_add(float64 a, float64 b, float_status *status)
-{
-    flag aSign, bSign;
-    a = float64_squash_input_denormal(a, status);
-    b = float64_squash_input_denormal(b, status);
-
-    aSign = extractFloat64Sign( a );
-    bSign = extractFloat64Sign( b );
-    if ( aSign == bSign ) {
-        return addFloat64Sigs(a, b, aSign, status);
-    }
-    else {
-        return subFloat64Sigs(a, b, aSign, status);
-    }
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of subtracting the double-precision floating-point values
-| `a' and `b'.  The operation is performed according to the IEC/IEEE Standard
-| for Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-float64 float64_sub(float64 a, float64 b, float_status *status)
-{
-    flag aSign, bSign;
-    a = float64_squash_input_denormal(a, status);
-    b = float64_squash_input_denormal(b, status);
-
-    aSign = extractFloat64Sign( a );
-    bSign = extractFloat64Sign( b );
-    if ( aSign == bSign ) {
-        return subFloat64Sigs(a, b, aSign, status);
-    }
-    else {
-        return addFloat64Sigs(a, b, aSign, status);
-    }
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of multiplying the double-precision floating-point values
-| `a' and `b'.  The operation is performed according to the IEC/IEEE Standard
-| for Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-float64 float64_mul(float64 a, float64 b, float_status *status)
-{
-    flag aSign, bSign, zSign;
-    int aExp, bExp, zExp;
-    uint64_t aSig, bSig, zSig0, zSig1;
-
-    a = float64_squash_input_denormal(a, status);
-    b = float64_squash_input_denormal(b, status);
-
-    aSig = extractFloat64Frac( a );
-    aExp = extractFloat64Exp( a );
-    aSign = extractFloat64Sign( a );
-    bSig = extractFloat64Frac( b );
-    bExp = extractFloat64Exp( b );
-    bSign = extractFloat64Sign( b );
-    zSign = aSign ^ bSign;
-    if ( aExp == 0x7FF ) {
-        if ( aSig || ( ( bExp == 0x7FF ) && bSig ) ) {
-            return propagateFloat64NaN(a, b, status);
-        }
-        if ( ( bExp | bSig ) == 0 ) {
-            float_raise(float_flag_invalid, status);
-            return float64_default_nan;
-        }
-        return packFloat64( zSign, 0x7FF, 0 );
-    }
-    if ( bExp == 0x7FF ) {
-        if (bSig) {
-            return propagateFloat64NaN(a, b, status);
-        }
-        if ( ( aExp | aSig ) == 0 ) {
-            float_raise(float_flag_invalid, status);
-            return float64_default_nan;
-        }
-        return packFloat64( zSign, 0x7FF, 0 );
-    }
-    if ( aExp == 0 ) {
-        if ( aSig == 0 ) return packFloat64( zSign, 0, 0 );
-        normalizeFloat64Subnormal( aSig, &aExp, &aSig );
-    }
-    if ( bExp == 0 ) {
-        if ( bSig == 0 ) return packFloat64( zSign, 0, 0 );
-        normalizeFloat64Subnormal( bSig, &bExp, &bSig );
-    }
-    zExp = aExp + bExp - 0x3FF;
-    aSig = ( aSig | LIT64( 0x0010000000000000 ) )<<10;
-    bSig = ( bSig | LIT64( 0x0010000000000000 ) )<<11;
-    mul64To128( aSig, bSig, &zSig0, &zSig1 );
-    zSig0 |= ( zSig1 != 0 );
-    if ( 0 <= (int64_t) ( zSig0<<1 ) ) {
-        zSig0 <<= 1;
-        --zExp;
-    }
-    return roundAndPackFloat64(zSign, zExp, zSig0, status);
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of dividing the double-precision floating-point value `a'
-| by the corresponding value `b'.  The operation is performed according to
-| the IEC/IEEE Standard for Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-float64 float64_div(float64 a, float64 b, float_status *status)
-{
-    flag aSign, bSign, zSign;
-    int aExp, bExp, zExp;
-    uint64_t aSig, bSig, zSig;
-    uint64_t rem0, rem1;
-    uint64_t term0, term1;
-    a = float64_squash_input_denormal(a, status);
-    b = float64_squash_input_denormal(b, status);
-
-    aSig = extractFloat64Frac( a );
-    aExp = extractFloat64Exp( a );
-    aSign = extractFloat64Sign( a );
-    bSig = extractFloat64Frac( b );
-    bExp = extractFloat64Exp( b );
-    bSign = extractFloat64Sign( b );
-    zSign = aSign ^ bSign;
-    if ( aExp == 0x7FF ) {
-        if (aSig) {
-            return propagateFloat64NaN(a, b, status);
-        }
-        if ( bExp == 0x7FF ) {
-            if (bSig) {
-                return propagateFloat64NaN(a, b, status);
-            }
-            float_raise(float_flag_invalid, status);
-            return float64_default_nan;
-        }
-        return packFloat64( zSign, 0x7FF, 0 );
-    }
-    if ( bExp == 0x7FF ) {
-        if (bSig) {
-            return propagateFloat64NaN(a, b, status);
-        }
-        return packFloat64( zSign, 0, 0 );
-    }
-    if ( bExp == 0 ) {
-        if ( bSig == 0 ) {
-            if ( ( aExp | aSig ) == 0 ) {
-                float_raise(float_flag_invalid, status);
-                return float64_default_nan;
-            }
-            float_raise(float_flag_divbyzero, status);
-            return packFloat64( zSign, 0x7FF, 0 );
-        }
-        normalizeFloat64Subnormal( bSig, &bExp, &bSig );
-    }
-    if ( aExp == 0 ) {
-        if ( aSig == 0 ) return packFloat64( zSign, 0, 0 );
-        normalizeFloat64Subnormal( aSig, &aExp, &aSig );
-    }
-    zExp = aExp - bExp + 0x3FD;
-    aSig = ( aSig | LIT64( 0x0010000000000000 ) )<<10;
-    bSig = ( bSig | LIT64( 0x0010000000000000 ) )<<11;
-    if ( bSig <= ( aSig + aSig ) ) {
-        aSig >>= 1;
-        ++zExp;
-    }
-    zSig = estimateDiv128To64( aSig, 0, bSig );
-    if ( ( zSig & 0x1FF ) <= 2 ) {
-        mul64To128( bSig, zSig, &term0, &term1 );
-        sub128( aSig, 0, term0, term1, &rem0, &rem1 );
-        while ( (int64_t) rem0 < 0 ) {
-            --zSig;
-            add128( rem0, rem1, 0, bSig, &rem0, &rem1 );
-        }
-        zSig |= ( rem1 != 0 );
-    }
-    return roundAndPackFloat64(zSign, zExp, zSig, status);
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the remainder of the double-precision floating-point value `a'
-| with respect to the corresponding value `b'.  The operation is performed
-| according to the IEC/IEEE Standard for Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-float64 float64_rem(float64 a, float64 b, float_status *status)
-{
-    flag aSign, zSign;
-    int aExp, bExp, expDiff;
-    uint64_t aSig, bSig;
-    uint64_t q, alternateASig;
-    int64_t sigMean;
-
-    a = float64_squash_input_denormal(a, status);
-    b = float64_squash_input_denormal(b, status);
-    aSig = extractFloat64Frac( a );
-    aExp = extractFloat64Exp( a );
-    aSign = extractFloat64Sign( a );
-    bSig = extractFloat64Frac( b );
-    bExp = extractFloat64Exp( b );
-    if ( aExp == 0x7FF ) {
-        if ( aSig || ( ( bExp == 0x7FF ) && bSig ) ) {
-            return propagateFloat64NaN(a, b, status);
-        }
-        float_raise(float_flag_invalid, status);
-        return float64_default_nan;
-    }
-    if ( bExp == 0x7FF ) {
-        if (bSig) {
-            return propagateFloat64NaN(a, b, status);
-        }
-        return a;
-    }
-    if ( bExp == 0 ) {
-        if ( bSig == 0 ) {
-            float_raise(float_flag_invalid, status);
-            return float64_default_nan;
-        }
-        normalizeFloat64Subnormal( bSig, &bExp, &bSig );
-    }
-    if ( aExp == 0 ) {
-        if ( aSig == 0 ) return a;
-        normalizeFloat64Subnormal( aSig, &aExp, &aSig );
-    }
-    expDiff = aExp - bExp;
-    aSig = ( aSig | LIT64( 0x0010000000000000 ) )<<11;
-    bSig = ( bSig | LIT64( 0x0010000000000000 ) )<<11;
-    if ( expDiff < 0 ) {
-        if ( expDiff < -1 ) return a;
-        aSig >>= 1;
-    }
-    q = ( bSig <= aSig );
-    if ( q ) aSig -= bSig;
-    expDiff -= 64;
-    while ( 0 < expDiff ) {
-        q = estimateDiv128To64( aSig, 0, bSig );
-        q = ( 2 < q ) ? q - 2 : 0;
-        aSig = - ( ( bSig>>2 ) * q );
-        expDiff -= 62;
-    }
-    expDiff += 64;
-    if ( 0 < expDiff ) {
-        q = estimateDiv128To64( aSig, 0, bSig );
-        q = ( 2 < q ) ? q - 2 : 0;
-        q >>= 64 - expDiff;
-        bSig >>= 2;
-        aSig = ( ( aSig>>1 )<<( expDiff - 1 ) ) - bSig * q;
-    }
-    else {
-        aSig >>= 2;
-        bSig >>= 2;
-    }
-    do {
-        alternateASig = aSig;
-        ++q;
-        aSig -= bSig;
-    } while ( 0 <= (int64_t) aSig );
-    sigMean = aSig + alternateASig;
-    if ( ( sigMean < 0 ) || ( ( sigMean == 0 ) && ( q & 1 ) ) ) {
-        aSig = alternateASig;
-    }
-    zSign = ( (int64_t) aSig < 0 );
-    if ( zSign ) aSig = - aSig;
-    return normalizeRoundAndPackFloat64(aSign ^ zSign, bExp, aSig, status);
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of multiplying the double-precision floating-point values
-| `a' and `b' then adding 'c', with no intermediate rounding step after the
-| multiplication.  The operation is performed according to the IEC/IEEE
-| Standard for Binary Floating-Point Arithmetic 754-2008.
-| The flags argument allows the caller to select negation of the
-| addend, the intermediate product, or the final result. (The difference
-| between this and having the caller do a separate negation is that negating
-| externally will flip the sign bit on NaNs.)
-*----------------------------------------------------------------------------*/
-
-float64 float64_muladd(float64 a, float64 b, float64 c, int flags,
-                       float_status *status)
-{
-    flag aSign, bSign, cSign, zSign;
-    int aExp, bExp, cExp, pExp, zExp, expDiff;
-    uint64_t aSig, bSig, cSig;
-    flag pInf, pZero, pSign;
-    uint64_t pSig0, pSig1, cSig0, cSig1, zSig0, zSig1;
-    int shiftcount;
-    flag signflip, infzero;
-
-    a = float64_squash_input_denormal(a, status);
-    b = float64_squash_input_denormal(b, status);
-    c = float64_squash_input_denormal(c, status);
-    aSig = extractFloat64Frac(a);
-    aExp = extractFloat64Exp(a);
-    aSign = extractFloat64Sign(a);
-    bSig = extractFloat64Frac(b);
-    bExp = extractFloat64Exp(b);
-    bSign = extractFloat64Sign(b);
-    cSig = extractFloat64Frac(c);
-    cExp = extractFloat64Exp(c);
-    cSign = extractFloat64Sign(c);
-
-    infzero = ((aExp == 0 && aSig == 0 && bExp == 0x7ff && bSig == 0) ||
-               (aExp == 0x7ff && aSig == 0 && bExp == 0 && bSig == 0));
-
-    /* It is implementation-defined whether the cases of (0,inf,qnan)
-     * and (inf,0,qnan) raise InvalidOperation or not (and what QNaN
-     * they return if they do), so we have to hand this information
-     * off to the target-specific pick-a-NaN routine.
-     */
-    if (((aExp == 0x7ff) && aSig) ||
-        ((bExp == 0x7ff) && bSig) ||
-        ((cExp == 0x7ff) && cSig)) {
-        return propagateFloat64MulAddNaN(a, b, c, infzero, status);
-    }
-
-    if (infzero) {
-        float_raise(float_flag_invalid, status);
-        return float64_default_nan;
-    }
-
-    if (flags & float_muladd_negate_c) {
-        cSign ^= 1;
-    }
-
-    signflip = (flags & float_muladd_negate_result) ? 1 : 0;
-
-    /* Work out the sign and type of the product */
-    pSign = aSign ^ bSign;
-    if (flags & float_muladd_negate_product) {
-        pSign ^= 1;
-    }
-    pInf = (aExp == 0x7ff) || (bExp == 0x7ff);
-    pZero = ((aExp | aSig) == 0) || ((bExp | bSig) == 0);
-
-    if (cExp == 0x7ff) {
-        if (pInf && (pSign ^ cSign)) {
-            /* addition of opposite-signed infinities => InvalidOperation */
-            float_raise(float_flag_invalid, status);
-            return float64_default_nan;
-        }
-        /* Otherwise generate an infinity of the same sign */
-        return packFloat64(cSign ^ signflip, 0x7ff, 0);
-    }
-
-    if (pInf) {
-        return packFloat64(pSign ^ signflip, 0x7ff, 0);
-    }
-
-    if (pZero) {
-        if (cExp == 0) {
-            if (cSig == 0) {
-                /* Adding two exact zeroes */
-                if (pSign == cSign) {
-                    zSign = pSign;
-                } else if (status->float_rounding_mode == float_round_down) {
-                    zSign = 1;
-                } else {
-                    zSign = 0;
-                }
-                return packFloat64(zSign ^ signflip, 0, 0);
-            }
-            /* Exact zero plus a denorm */
-            if (status->flush_to_zero) {
-                float_raise(float_flag_output_denormal, status);
-                return packFloat64(cSign ^ signflip, 0, 0);
-            }
-        }
-        /* Zero plus something non-zero : just return the something */
-        if (flags & float_muladd_halve_result) {
-            if (cExp == 0) {
-                normalizeFloat64Subnormal(cSig, &cExp, &cSig);
-            }
-            /* Subtract one to halve, and one again because roundAndPackFloat64
-             * wants one less than the true exponent.
-             */
-            cExp -= 2;
-            cSig = (cSig | 0x0010000000000000ULL) << 10;
-            return roundAndPackFloat64(cSign ^ signflip, cExp, cSig, status);
-        }
-        return packFloat64(cSign ^ signflip, cExp, cSig);
-    }
-
-    if (aExp == 0) {
-        normalizeFloat64Subnormal(aSig, &aExp, &aSig);
-    }
-    if (bExp == 0) {
-        normalizeFloat64Subnormal(bSig, &bExp, &bSig);
-    }
-
-    /* Calculate the actual result a * b + c */
-
-    /* Multiply first; this is easy. */
-    /* NB: we subtract 0x3fe where float64_mul() subtracts 0x3ff
-     * because we want the true exponent, not the "one-less-than"
-     * flavour that roundAndPackFloat64() takes.
-     */
-    pExp = aExp + bExp - 0x3fe;
-    aSig = (aSig | LIT64(0x0010000000000000))<<10;
-    bSig = (bSig | LIT64(0x0010000000000000))<<11;
-    mul64To128(aSig, bSig, &pSig0, &pSig1);
-    if ((int64_t)(pSig0 << 1) >= 0) {
-        shortShift128Left(pSig0, pSig1, 1, &pSig0, &pSig1);
-        pExp--;
-    }
-
-    zSign = pSign ^ signflip;
-
-    /* Now [pSig0:pSig1] is the significand of the multiply, with the explicit
-     * bit in position 126.
-     */
-    if (cExp == 0) {
-        if (!cSig) {
-            /* Throw out the special case of c being an exact zero now */
-            shift128RightJamming(pSig0, pSig1, 64, &pSig0, &pSig1);
-            if (flags & float_muladd_halve_result) {
-                pExp--;
-            }
-            return roundAndPackFloat64(zSign, pExp - 1,
-                                       pSig1, status);
-        }
-        normalizeFloat64Subnormal(cSig, &cExp, &cSig);
-    }
-
-    /* Shift cSig and add the explicit bit so [cSig0:cSig1] is the
-     * significand of the addend, with the explicit bit in position 126.
-     */
-    cSig0 = cSig << (126 - 64 - 52);
-    cSig1 = 0;
-    cSig0 |= LIT64(0x4000000000000000);
-    expDiff = pExp - cExp;
-
-    if (pSign == cSign) {
-        /* Addition */
-        if (expDiff > 0) {
-            /* scale c to match p */
-            shift128RightJamming(cSig0, cSig1, expDiff, &cSig0, &cSig1);
-            zExp = pExp;
-        } else if (expDiff < 0) {
-            /* scale p to match c */
-            shift128RightJamming(pSig0, pSig1, -expDiff, &pSig0, &pSig1);
-            zExp = cExp;
-        } else {
-            /* no scaling needed */
-            zExp = cExp;
-        }
-        /* Add significands and make sure explicit bit ends up in posn 126 */
-        add128(pSig0, pSig1, cSig0, cSig1, &zSig0, &zSig1);
-        if ((int64_t)zSig0 < 0) {
-            shift128RightJamming(zSig0, zSig1, 1, &zSig0, &zSig1);
-        } else {
-            zExp--;
-        }
-        shift128RightJamming(zSig0, zSig1, 64, &zSig0, &zSig1);
-        if (flags & float_muladd_halve_result) {
-            zExp--;
-        }
-        return roundAndPackFloat64(zSign, zExp, zSig1, status);
-    } else {
-        /* Subtraction */
-        if (expDiff > 0) {
-            shift128RightJamming(cSig0, cSig1, expDiff, &cSig0, &cSig1);
-            sub128(pSig0, pSig1, cSig0, cSig1, &zSig0, &zSig1);
-            zExp = pExp;
-        } else if (expDiff < 0) {
-            shift128RightJamming(pSig0, pSig1, -expDiff, &pSig0, &pSig1);
-            sub128(cSig0, cSig1, pSig0, pSig1, &zSig0, &zSig1);
-            zExp = cExp;
-            zSign ^= 1;
-        } else {
-            zExp = pExp;
-            if (lt128(cSig0, cSig1, pSig0, pSig1)) {
-                sub128(pSig0, pSig1, cSig0, cSig1, &zSig0, &zSig1);
-            } else if (lt128(pSig0, pSig1, cSig0, cSig1)) {
-                sub128(cSig0, cSig1, pSig0, pSig1, &zSig0, &zSig1);
-                zSign ^= 1;
-            } else {
-                /* Exact zero */
-                zSign = signflip;
-                if (status->float_rounding_mode == float_round_down) {
-                    zSign ^= 1;
-                }
-                return packFloat64(zSign, 0, 0);
-            }
-        }
-        --zExp;
-        /* Do the equivalent of normalizeRoundAndPackFloat64() but
-         * starting with the significand in a pair of uint64_t.
-         */
-        if (zSig0) {
-            shiftcount = countLeadingZeros64(zSig0) - 1;
-            shortShift128Left(zSig0, zSig1, shiftcount, &zSig0, &zSig1);
-            if (zSig1) {
-                zSig0 |= 1;
-            }
-            zExp -= shiftcount;
-        } else {
-            shiftcount = countLeadingZeros64(zSig1);
-            if (shiftcount == 0) {
-                zSig0 = (zSig1 >> 1) | (zSig1 & 1);
-                zExp -= 63;
-            } else {
-                shiftcount--;
-                zSig0 = zSig1 << shiftcount;
-                zExp -= (shiftcount + 64);
-            }
-        }
-        if (flags & float_muladd_halve_result) {
-            zExp--;
-        }
-        return roundAndPackFloat64(zSign, zExp, zSig0, status);
-    }
-}
-
-/*----------------------------------------------------------------------------
-| Returns the square root of the double-precision floating-point value `a'.
-| The operation is performed according to the IEC/IEEE Standard for Binary
-| Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-float64 float64_sqrt(float64 a, float_status *status)
-{
-    flag aSign;
-    int aExp, zExp;
-    uint64_t aSig, zSig, doubleZSig;
-    uint64_t rem0, rem1, term0, term1;
-    a = float64_squash_input_denormal(a, status);
-
-    aSig = extractFloat64Frac( a );
-    aExp = extractFloat64Exp( a );
-    aSign = extractFloat64Sign( a );
-    if ( aExp == 0x7FF ) {
-        if (aSig) {
-            return propagateFloat64NaN(a, a, status);
-        }
-        if ( ! aSign ) return a;
-        float_raise(float_flag_invalid, status);
-        return float64_default_nan;
-    }
-    if ( aSign ) {
-        if ( ( aExp | aSig ) == 0 ) return a;
-        float_raise(float_flag_invalid, status);
-        return float64_default_nan;
-    }
-    if ( aExp == 0 ) {
-        if ( aSig == 0 ) return float64_zero;
-        normalizeFloat64Subnormal( aSig, &aExp, &aSig );
-    }
-    zExp = ( ( aExp - 0x3FF )>>1 ) + 0x3FE;
-    aSig |= LIT64( 0x0010000000000000 );
-    zSig = estimateSqrt32( aExp, aSig>>21 );
-    aSig <<= 9 - ( aExp & 1 );
-    zSig = estimateDiv128To64( aSig, 0, zSig<<32 ) + ( zSig<<30 );
-    if ( ( zSig & 0x1FF ) <= 5 ) {
-        doubleZSig = zSig<<1;
-        mul64To128( zSig, zSig, &term0, &term1 );
-        sub128( aSig, 0, term0, term1, &rem0, &rem1 );
-        while ( (int64_t) rem0 < 0 ) {
-            --zSig;
-            doubleZSig -= 2;
-            add128( rem0, rem1, zSig>>63, doubleZSig | 1, &rem0, &rem1 );
-        }
-        zSig |= ( ( rem0 | rem1 ) != 0 );
-    }
-    return roundAndPackFloat64(0, zExp, zSig, status);
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the binary log of the double-precision floating-point value `a'.
-| The operation is performed according to the IEC/IEEE Standard for Binary
-| Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-float64 float64_log2(float64 a, float_status *status)
-{
-    flag aSign, zSign;
-    int aExp;
-    uint64_t aSig, aSig0, aSig1, zSig, i;
-    a = float64_squash_input_denormal(a, status);
-
-    aSig = extractFloat64Frac( a );
-    aExp = extractFloat64Exp( a );
-    aSign = extractFloat64Sign( a );
-
-    if ( aExp == 0 ) {
-        if ( aSig == 0 ) return packFloat64( 1, 0x7FF, 0 );
-        normalizeFloat64Subnormal( aSig, &aExp, &aSig );
-    }
-    if ( aSign ) {
-        float_raise(float_flag_invalid, status);
-        return float64_default_nan;
-    }
-    if ( aExp == 0x7FF ) {
-        if (aSig) {
-            return propagateFloat64NaN(a, float64_zero, status);
-        }
-        return a;
-    }
-
-    aExp -= 0x3FF;
-    aSig |= LIT64( 0x0010000000000000 );
-    zSign = aExp < 0;
-    zSig = (uint64_t)aExp << 52;
-    for (i = 1LL << 51; i > 0; i >>= 1) {
-        mul64To128( aSig, aSig, &aSig0, &aSig1 );
-        aSig = ( aSig0 << 12 ) | ( aSig1 >> 52 );
-        if ( aSig & LIT64( 0x0020000000000000 ) ) {
-            aSig >>= 1;
-            zSig |= i;
-        }
-    }
-
-    if ( zSign )
-        zSig = -zSig;
-    return normalizeRoundAndPackFloat64(zSign, 0x408, zSig, status);
-}
-
-/*----------------------------------------------------------------------------
-| Returns 1 if the double-precision floating-point value `a' is equal to the
-| corresponding value `b', and 0 otherwise.  The invalid exception is raised
-| if either operand is a NaN.  Otherwise, the comparison is performed
-| according to the IEC/IEEE Standard for Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-int float64_eq(float64 a, float64 b, float_status *status)
-{
-    uint64_t av, bv;
-    a = float64_squash_input_denormal(a, status);
-    b = float64_squash_input_denormal(b, status);
-
-    if (    ( ( extractFloat64Exp( a ) == 0x7FF ) && extractFloat64Frac( a ) )
-         || ( ( extractFloat64Exp( b ) == 0x7FF ) && extractFloat64Frac( b ) )
-       ) {
-        float_raise(float_flag_invalid, status);
-        return 0;
-    }
-    av = float64_val(a);
-    bv = float64_val(b);
-    return ( av == bv ) || ( (uint64_t) ( ( av | bv )<<1 ) == 0 );
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns 1 if the double-precision floating-point value `a' is less than or
-| equal to the corresponding value `b', and 0 otherwise.  The invalid
-| exception is raised if either operand is a NaN.  The comparison is performed
-| according to the IEC/IEEE Standard for Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-int float64_le(float64 a, float64 b, float_status *status)
-{
-    flag aSign, bSign;
-    uint64_t av, bv;
-    a = float64_squash_input_denormal(a, status);
-    b = float64_squash_input_denormal(b, status);
-
-    if (    ( ( extractFloat64Exp( a ) == 0x7FF ) && extractFloat64Frac( a ) )
-         || ( ( extractFloat64Exp( b ) == 0x7FF ) && extractFloat64Frac( b ) )
-       ) {
-        float_raise(float_flag_invalid, status);
-        return 0;
-    }
-    aSign = extractFloat64Sign( a );
-    bSign = extractFloat64Sign( b );
-    av = float64_val(a);
-    bv = float64_val(b);
-    if ( aSign != bSign ) return aSign || ( (uint64_t) ( ( av | bv )<<1 ) == 0 );
-    return ( av == bv ) || ( aSign ^ ( av < bv ) );
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns 1 if the double-precision floating-point value `a' is less than
-| the corresponding value `b', and 0 otherwise.  The invalid exception is
-| raised if either operand is a NaN.  The comparison is performed according
-| to the IEC/IEEE Standard for Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-int float64_lt(float64 a, float64 b, float_status *status)
-{
-    flag aSign, bSign;
-    uint64_t av, bv;
-
-    a = float64_squash_input_denormal(a, status);
-    b = float64_squash_input_denormal(b, status);
-    if (    ( ( extractFloat64Exp( a ) == 0x7FF ) && extractFloat64Frac( a ) )
-         || ( ( extractFloat64Exp( b ) == 0x7FF ) && extractFloat64Frac( b ) )
-       ) {
-        float_raise(float_flag_invalid, status);
-        return 0;
-    }
-    aSign = extractFloat64Sign( a );
-    bSign = extractFloat64Sign( b );
-    av = float64_val(a);
-    bv = float64_val(b);
-    if ( aSign != bSign ) return aSign && ( (uint64_t) ( ( av | bv )<<1 ) != 0 );
-    return ( av != bv ) && ( aSign ^ ( av < bv ) );
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns 1 if the double-precision floating-point values `a' and `b' cannot
-| be compared, and 0 otherwise.  The invalid exception is raised if either
-| operand is a NaN.  The comparison is performed according to the IEC/IEEE
-| Standard for Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-int float64_unordered(float64 a, float64 b, float_status *status)
-{
-    a = float64_squash_input_denormal(a, status);
-    b = float64_squash_input_denormal(b, status);
-
-    if (    ( ( extractFloat64Exp( a ) == 0x7FF ) && extractFloat64Frac( a ) )
-         || ( ( extractFloat64Exp( b ) == 0x7FF ) && extractFloat64Frac( b ) )
-       ) {
-        float_raise(float_flag_invalid, status);
-        return 1;
-    }
-    return 0;
-}
-
-/*----------------------------------------------------------------------------
-| Returns 1 if the double-precision floating-point value `a' is equal to the
-| corresponding value `b', and 0 otherwise.  Quiet NaNs do not cause an
-| exception.The comparison is performed according to the IEC/IEEE Standard
-| for Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-int float64_eq_quiet(float64 a, float64 b, float_status *status)
-{
-    uint64_t av, bv;
-    a = float64_squash_input_denormal(a, status);
-    b = float64_squash_input_denormal(b, status);
-
-    if (    ( ( extractFloat64Exp( a ) == 0x7FF ) && extractFloat64Frac( a ) )
-         || ( ( extractFloat64Exp( b ) == 0x7FF ) && extractFloat64Frac( b ) )
-       ) {
-        if ( float64_is_signaling_nan( a ) || float64_is_signaling_nan( b ) ) {
-            float_raise(float_flag_invalid, status);
-        }
-        return 0;
-    }
-    av = float64_val(a);
-    bv = float64_val(b);
-    return ( av == bv ) || ( (uint64_t) ( ( av | bv )<<1 ) == 0 );
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns 1 if the double-precision floating-point value `a' is less than or
-| equal to the corresponding value `b', and 0 otherwise.  Quiet NaNs do not
-| cause an exception.  Otherwise, the comparison is performed according to the
-| IEC/IEEE Standard for Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-int float64_le_quiet(float64 a, float64 b, float_status *status)
-{
-    flag aSign, bSign;
-    uint64_t av, bv;
-    a = float64_squash_input_denormal(a, status);
-    b = float64_squash_input_denormal(b, status);
-
-    if (    ( ( extractFloat64Exp( a ) == 0x7FF ) && extractFloat64Frac( a ) )
-         || ( ( extractFloat64Exp( b ) == 0x7FF ) && extractFloat64Frac( b ) )
-       ) {
-        if ( float64_is_signaling_nan( a ) || float64_is_signaling_nan( b ) ) {
-            float_raise(float_flag_invalid, status);
-        }
-        return 0;
-    }
-    aSign = extractFloat64Sign( a );
-    bSign = extractFloat64Sign( b );
-    av = float64_val(a);
-    bv = float64_val(b);
-    if ( aSign != bSign ) return aSign || ( (uint64_t) ( ( av | bv )<<1 ) == 0 );
-    return ( av == bv ) || ( aSign ^ ( av < bv ) );
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns 1 if the double-precision floating-point value `a' is less than
-| the corresponding value `b', and 0 otherwise.  Quiet NaNs do not cause an
-| exception.  Otherwise, the comparison is performed according to the IEC/IEEE
-| Standard for Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-int float64_lt_quiet(float64 a, float64 b, float_status *status)
-{
-    flag aSign, bSign;
-    uint64_t av, bv;
-    a = float64_squash_input_denormal(a, status);
-    b = float64_squash_input_denormal(b, status);
-
-    if (    ( ( extractFloat64Exp( a ) == 0x7FF ) && extractFloat64Frac( a ) )
-         || ( ( extractFloat64Exp( b ) == 0x7FF ) && extractFloat64Frac( b ) )
-       ) {
-        if ( float64_is_signaling_nan( a ) || float64_is_signaling_nan( b ) ) {
-            float_raise(float_flag_invalid, status);
-        }
-        return 0;
-    }
-    aSign = extractFloat64Sign( a );
-    bSign = extractFloat64Sign( b );
-    av = float64_val(a);
-    bv = float64_val(b);
-    if ( aSign != bSign ) return aSign && ( (uint64_t) ( ( av | bv )<<1 ) != 0 );
-    return ( av != bv ) && ( aSign ^ ( av < bv ) );
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns 1 if the double-precision floating-point values `a' and `b' cannot
-| be compared, and 0 otherwise.  Quiet NaNs do not cause an exception.  The
-| comparison is performed according to the IEC/IEEE Standard for Binary
-| Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-int float64_unordered_quiet(float64 a, float64 b, float_status *status)
-{
-    a = float64_squash_input_denormal(a, status);
-    b = float64_squash_input_denormal(b, status);
-
-    if (    ( ( extractFloat64Exp( a ) == 0x7FF ) && extractFloat64Frac( a ) )
-         || ( ( extractFloat64Exp( b ) == 0x7FF ) && extractFloat64Frac( b ) )
-       ) {
-        if ( float64_is_signaling_nan( a ) || float64_is_signaling_nan( b ) ) {
-            float_raise(float_flag_invalid, status);
-        }
-        return 1;
-    }
-    return 0;
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of converting the extended double-precision floating-
-| point value `a' to the 32-bit two's complement integer format.  The
-| conversion is performed according to the IEC/IEEE Standard for Binary
-| Floating-Point Arithmetic---which means in particular that the conversion
-| is rounded according to the current rounding mode.  If `a' is a NaN, the
-| largest positive integer is returned.  Otherwise, if the conversion
-| overflows, the largest integer with the same sign as `a' is returned.
-*----------------------------------------------------------------------------*/
-
-int32_t floatx80_to_int32(floatx80 a, float_status *status)
-{
-    flag aSign;
-    int32_t aExp, shiftCount;
-    uint64_t aSig;
-
-    aSig = extractFloatx80Frac( a );
-    aExp = extractFloatx80Exp( a );
-    aSign = extractFloatx80Sign( a );
-    if ( ( aExp == 0x7FFF ) && (uint64_t) ( aSig<<1 ) ) aSign = 0;
-    shiftCount = 0x4037 - aExp;
-    if ( shiftCount <= 0 ) shiftCount = 1;
-    shift64RightJamming( aSig, shiftCount, &aSig );
-    return roundAndPackInt32(aSign, aSig, status);
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of converting the extended double-precision floating-
-| point value `a' to the 32-bit two's complement integer format.  The
-| conversion is performed according to the IEC/IEEE Standard for Binary
-| Floating-Point Arithmetic, except that the conversion is always rounded
-| toward zero.  If `a' is a NaN, the largest positive integer is returned.
-| Otherwise, if the conversion overflows, the largest integer with the same
-| sign as `a' is returned.
-*----------------------------------------------------------------------------*/
-
-int32_t floatx80_to_int32_round_to_zero(floatx80 a, float_status *status)
-{
-    flag aSign;
-    int32_t aExp, shiftCount;
-    uint64_t aSig, savedASig;
-    int32_t z;
-
-    aSig = extractFloatx80Frac( a );
-    aExp = extractFloatx80Exp( a );
-    aSign = extractFloatx80Sign( a );
-    if ( 0x401E < aExp ) {
-        if ( ( aExp == 0x7FFF ) && (uint64_t) ( aSig<<1 ) ) aSign = 0;
-        goto invalid;
-    }
-    else if ( aExp < 0x3FFF ) {
-        if (aExp || aSig) {
-            status->float_exception_flags |= float_flag_inexact;
-        }
-        return 0;
-    }
-    shiftCount = 0x403E - aExp;
-    savedASig = aSig;
-    aSig >>= shiftCount;
-    z = aSig;
-    if ( aSign ) z = - z;
-    if ( ( z < 0 ) ^ aSign ) {
- invalid:
-        float_raise(float_flag_invalid, status);
-        return aSign ? (int32_t) 0x80000000 : 0x7FFFFFFF;
-    }
-    if ( ( aSig<<shiftCount ) != savedASig ) {
-        status->float_exception_flags |= float_flag_inexact;
-    }
-    return z;
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of converting the extended double-precision floating-
-| point value `a' to the 64-bit two's complement integer format.  The
-| conversion is performed according to the IEC/IEEE Standard for Binary
-| Floating-Point Arithmetic---which means in particular that the conversion
-| is rounded according to the current rounding mode.  If `a' is a NaN,
-| the largest positive integer is returned.  Otherwise, if the conversion
-| overflows, the largest integer with the same sign as `a' is returned.
-*----------------------------------------------------------------------------*/
-
-int64_t floatx80_to_int64(floatx80 a, float_status *status)
-{
-    flag aSign;
-    int32_t aExp, shiftCount;
-    uint64_t aSig, aSigExtra;
-
-    aSig = extractFloatx80Frac( a );
-    aExp = extractFloatx80Exp( a );
-    aSign = extractFloatx80Sign( a );
-    shiftCount = 0x403E - aExp;
-    if ( shiftCount <= 0 ) {
-        if ( shiftCount ) {
-            float_raise(float_flag_invalid, status);
-            if (    ! aSign
-                 || (    ( aExp == 0x7FFF )
-                      && ( aSig != LIT64( 0x8000000000000000 ) ) )
-               ) {
-                return LIT64( 0x7FFFFFFFFFFFFFFF );
-            }
-            return (int64_t) LIT64( 0x8000000000000000 );
-        }
-        aSigExtra = 0;
-    }
-    else {
-        shift64ExtraRightJamming( aSig, 0, shiftCount, &aSig, &aSigExtra );
-    }
-    return roundAndPackInt64(aSign, aSig, aSigExtra, status);
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of converting the extended double-precision floating-
-| point value `a' to the 64-bit two's complement integer format.  The
-| conversion is performed according to the IEC/IEEE Standard for Binary
-| Floating-Point Arithmetic, except that the conversion is always rounded
-| toward zero.  If `a' is a NaN, the largest positive integer is returned.
-| Otherwise, if the conversion overflows, the largest integer with the same
-| sign as `a' is returned.
-*----------------------------------------------------------------------------*/
-
-int64_t floatx80_to_int64_round_to_zero(floatx80 a, float_status *status)
-{
-    flag aSign;
-    int32_t aExp, shiftCount;
-    uint64_t aSig;
-    int64_t z;
-
-    aSig = extractFloatx80Frac( a );
-    aExp = extractFloatx80Exp( a );
-    aSign = extractFloatx80Sign( a );
-    shiftCount = aExp - 0x403E;
-    if ( 0 <= shiftCount ) {
-        aSig &= LIT64( 0x7FFFFFFFFFFFFFFF );
-        if ( ( a.high != 0xC03E ) || aSig ) {
-            float_raise(float_flag_invalid, status);
-            if ( ! aSign || ( ( aExp == 0x7FFF ) && aSig ) ) {
-                return LIT64( 0x7FFFFFFFFFFFFFFF );
-            }
-        }
-        return (int64_t) LIT64( 0x8000000000000000 );
-    }
-    else if ( aExp < 0x3FFF ) {
-        if (aExp | aSig) {
-            status->float_exception_flags |= float_flag_inexact;
-        }
-        return 0;
-    }
-    z = aSig>>( - shiftCount );
-    if ( (uint64_t) ( aSig<<( shiftCount & 63 ) ) ) {
-        status->float_exception_flags |= float_flag_inexact;
-    }
-    if ( aSign ) z = - z;
-    return z;
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of converting the extended double-precision floating-
-| point value `a' to the single-precision floating-point format.  The
-| conversion is performed according to the IEC/IEEE Standard for Binary
-| Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-float32 floatx80_to_float32(floatx80 a, float_status *status)
-{
-    flag aSign;
-    int32_t aExp;
-    uint64_t aSig;
-
-    aSig = extractFloatx80Frac( a );
-    aExp = extractFloatx80Exp( a );
-    aSign = extractFloatx80Sign( a );
-    if ( aExp == 0x7FFF ) {
-        if ( (uint64_t) ( aSig<<1 ) ) {
-            return commonNaNToFloat32(floatx80ToCommonNaN(a, status), status);
-        }
-        return packFloat32( aSign, 0xFF, 0 );
-    }
-    shift64RightJamming( aSig, 33, &aSig );
-    if ( aExp || aSig ) aExp -= 0x3F81;
-    return roundAndPackFloat32(aSign, aExp, aSig, status);
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of converting the extended double-precision floating-
-| point value `a' to the double-precision floating-point format.  The
-| conversion is performed according to the IEC/IEEE Standard for Binary
-| Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-float64 floatx80_to_float64(floatx80 a, float_status *status)
-{
-    flag aSign;
-    int32_t aExp;
-    uint64_t aSig, zSig;
-
-    aSig = extractFloatx80Frac( a );
-    aExp = extractFloatx80Exp( a );
-    aSign = extractFloatx80Sign( a );
-    if ( aExp == 0x7FFF ) {
-        if ( (uint64_t) ( aSig<<1 ) ) {
-            return commonNaNToFloat64(floatx80ToCommonNaN(a, status), status);
-        }
-        return packFloat64( aSign, 0x7FF, 0 );
-    }
-    shift64RightJamming( aSig, 1, &zSig );
-    if ( aExp || aSig ) aExp -= 0x3C01;
-    return roundAndPackFloat64(aSign, aExp, zSig, status);
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of converting the extended double-precision floating-
-| point value `a' to the quadruple-precision floating-point format.  The
-| conversion is performed according to the IEC/IEEE Standard for Binary
-| Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-float128 floatx80_to_float128(floatx80 a, float_status *status)
-{
-    flag aSign;
-    int aExp;
-    uint64_t aSig, zSig0, zSig1;
-
-    aSig = extractFloatx80Frac( a );
-    aExp = extractFloatx80Exp( a );
-    aSign = extractFloatx80Sign( a );
-    if ( ( aExp == 0x7FFF ) && (uint64_t) ( aSig<<1 ) ) {
-        return commonNaNToFloat128(floatx80ToCommonNaN(a, status), status);
-    }
-    shift128Right( aSig<<1, 0, 16, &zSig0, &zSig1 );
-    return packFloat128( aSign, aExp, zSig0, zSig1 );
-
-}
-
-/*----------------------------------------------------------------------------
-| Rounds the extended double-precision floating-point value `a' to an integer,
-| and returns the result as an extended quadruple-precision floating-point
-| value.  The operation is performed according to the IEC/IEEE Standard for
-| Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-floatx80 floatx80_round_to_int(floatx80 a, float_status *status)
-{
-    flag aSign;
-    int32_t aExp;
-    uint64_t lastBitMask, roundBitsMask;
-    floatx80 z;
-
-    aExp = extractFloatx80Exp( a );
-    if ( 0x403E <= aExp ) {
-        if ( ( aExp == 0x7FFF ) && (uint64_t) ( extractFloatx80Frac( a )<<1 ) ) {
-            return propagateFloatx80NaN(a, a, status);
-        }
-        return a;
-    }
-    if ( aExp < 0x3FFF ) {
-        if (    ( aExp == 0 )
-             && ( (uint64_t) ( extractFloatx80Frac( a )<<1 ) == 0 ) ) {
-            return a;
-        }
-        status->float_exception_flags |= float_flag_inexact;
-        aSign = extractFloatx80Sign( a );
-        switch (status->float_rounding_mode) {
-         case float_round_nearest_even:
-            if ( ( aExp == 0x3FFE ) && (uint64_t) ( extractFloatx80Frac( a )<<1 )
-               ) {
-                return
-                    packFloatx80( aSign, 0x3FFF, LIT64( 0x8000000000000000 ) );
-            }
-            break;
-        case float_round_ties_away:
-            if (aExp == 0x3FFE) {
-                return packFloatx80(aSign, 0x3FFF, LIT64(0x8000000000000000));
-            }
-            break;
-         case float_round_down:
-            return
-                  aSign ?
-                      packFloatx80( 1, 0x3FFF, LIT64( 0x8000000000000000 ) )
-                : packFloatx80( 0, 0, 0 );
-         case float_round_up:
-            return
-                  aSign ? packFloatx80( 1, 0, 0 )
-                : packFloatx80( 0, 0x3FFF, LIT64( 0x8000000000000000 ) );
-        }
-        return packFloatx80( aSign, 0, 0 );
-    }
-    lastBitMask = 1;
-    lastBitMask <<= 0x403E - aExp;
-    roundBitsMask = lastBitMask - 1;
-    z = a;
-    switch (status->float_rounding_mode) {
-    case float_round_nearest_even:
-        z.low += lastBitMask>>1;
-        if ((z.low & roundBitsMask) == 0) {
-            z.low &= ~lastBitMask;
-        }
-        break;
-    case float_round_ties_away:
-        z.low += lastBitMask >> 1;
-        break;
-    case float_round_to_zero:
-        break;
-    case float_round_up:
-        if (!extractFloatx80Sign(z)) {
-            z.low += roundBitsMask;
-        }
-        break;
-    case float_round_down:
-        if (extractFloatx80Sign(z)) {
-            z.low += roundBitsMask;
-        }
-        break;
-    default:
-        abort();
-    }
-    z.low &= ~ roundBitsMask;
-    if ( z.low == 0 ) {
-        ++z.high;
-        z.low = LIT64( 0x8000000000000000 );
-    }
-    if (z.low != a.low) {
-        status->float_exception_flags |= float_flag_inexact;
-    }
-    return z;
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of adding the absolute values of the extended double-
-| precision floating-point values `a' and `b'.  If `zSign' is 1, the sum is
-| negated before being returned.  `zSign' is ignored if the result is a NaN.
-| The addition is performed according to the IEC/IEEE Standard for Binary
-| Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-static floatx80 addFloatx80Sigs(floatx80 a, floatx80 b, flag zSign,
-                                float_status *status)
-{
-    int32_t aExp, bExp, zExp;
-    uint64_t aSig, bSig, zSig0, zSig1;
-    int32_t expDiff;
-
-    aSig = extractFloatx80Frac( a );
-    aExp = extractFloatx80Exp( a );
-    bSig = extractFloatx80Frac( b );
-    bExp = extractFloatx80Exp( b );
-    expDiff = aExp - bExp;
-    if ( 0 < expDiff ) {
-        if ( aExp == 0x7FFF ) {
-            if ((uint64_t)(aSig << 1)) {
-                return propagateFloatx80NaN(a, b, status);
-            }
-            return a;
-        }
-        if ( bExp == 0 ) --expDiff;
-        shift64ExtraRightJamming( bSig, 0, expDiff, &bSig, &zSig1 );
-        zExp = aExp;
-    }
-    else if ( expDiff < 0 ) {
-        if ( bExp == 0x7FFF ) {
-            if ((uint64_t)(bSig << 1)) {
-                return propagateFloatx80NaN(a, b, status);
-            }
-            return packFloatx80( zSign, 0x7FFF, LIT64( 0x8000000000000000 ) );
-        }
-        if ( aExp == 0 ) ++expDiff;
-        shift64ExtraRightJamming( aSig, 0, - expDiff, &aSig, &zSig1 );
-        zExp = bExp;
-    }
-    else {
-        if ( aExp == 0x7FFF ) {
-            if ( (uint64_t) ( ( aSig | bSig )<<1 ) ) {
-                return propagateFloatx80NaN(a, b, status);
-            }
-            return a;
-        }
-        zSig1 = 0;
-        zSig0 = aSig + bSig;
-        if ( aExp == 0 ) {
-            normalizeFloatx80Subnormal( zSig0, &zExp, &zSig0 );
-            goto roundAndPack;
-        }
-        zExp = aExp;
-        goto shiftRight1;
-    }
-    zSig0 = aSig + bSig;
-    if ( (int64_t) zSig0 < 0 ) goto roundAndPack;
- shiftRight1:
-    shift64ExtraRightJamming( zSig0, zSig1, 1, &zSig0, &zSig1 );
-    zSig0 |= LIT64( 0x8000000000000000 );
-    ++zExp;
- roundAndPack:
-    return roundAndPackFloatx80(status->floatx80_rounding_precision,
-                                zSign, zExp, zSig0, zSig1, status);
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of subtracting the absolute values of the extended
-| double-precision floating-point values `a' and `b'.  If `zSign' is 1, the
-| difference is negated before being returned.  `zSign' is ignored if the
-| result is a NaN.  The subtraction is performed according to the IEC/IEEE
-| Standard for Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-static floatx80 subFloatx80Sigs(floatx80 a, floatx80 b, flag zSign,
-                                float_status *status)
-{
-    int32_t aExp, bExp, zExp;
-    uint64_t aSig, bSig, zSig0, zSig1;
-    int32_t expDiff;
-    floatx80 z;
-
-    aSig = extractFloatx80Frac( a );
-    aExp = extractFloatx80Exp( a );
-    bSig = extractFloatx80Frac( b );
-    bExp = extractFloatx80Exp( b );
-    expDiff = aExp - bExp;
-    if ( 0 < expDiff ) goto aExpBigger;
-    if ( expDiff < 0 ) goto bExpBigger;
-    if ( aExp == 0x7FFF ) {
-        if ( (uint64_t) ( ( aSig | bSig )<<1 ) ) {
-            return propagateFloatx80NaN(a, b, status);
-        }
-        float_raise(float_flag_invalid, status);
-        z.low = floatx80_default_nan_low;
-        z.high = floatx80_default_nan_high;
-        return z;
-    }
-    if ( aExp == 0 ) {
-        aExp = 1;
-        bExp = 1;
-    }
-    zSig1 = 0;
-    if ( bSig < aSig ) goto aBigger;
-    if ( aSig < bSig ) goto bBigger;
-    return packFloatx80(status->float_rounding_mode == float_round_down, 0, 0);
- bExpBigger:
-    if ( bExp == 0x7FFF ) {
-        if ((uint64_t)(bSig << 1)) {
-            return propagateFloatx80NaN(a, b, status);
-        }
-        return packFloatx80( zSign ^ 1, 0x7FFF, LIT64( 0x8000000000000000 ) );
-    }
-    if ( aExp == 0 ) ++expDiff;
-    shift128RightJamming( aSig, 0, - expDiff, &aSig, &zSig1 );
- bBigger:
-    sub128( bSig, 0, aSig, zSig1, &zSig0, &zSig1 );
-    zExp = bExp;
-    zSign ^= 1;
-    goto normalizeRoundAndPack;
- aExpBigger:
-    if ( aExp == 0x7FFF ) {
-        if ((uint64_t)(aSig << 1)) {
-            return propagateFloatx80NaN(a, b, status);
-        }
-        return a;
-    }
-    if ( bExp == 0 ) --expDiff;
-    shift128RightJamming( bSig, 0, expDiff, &bSig, &zSig1 );
- aBigger:
-    sub128( aSig, 0, bSig, zSig1, &zSig0, &zSig1 );
-    zExp = aExp;
- normalizeRoundAndPack:
-    return normalizeRoundAndPackFloatx80(status->floatx80_rounding_precision,
-                                         zSign, zExp, zSig0, zSig1, status);
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of adding the extended double-precision floating-point
-| values `a' and `b'.  The operation is performed according to the IEC/IEEE
-| Standard for Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-floatx80 floatx80_add(floatx80 a, floatx80 b, float_status *status)
-{
-    flag aSign, bSign;
-
-    aSign = extractFloatx80Sign( a );
-    bSign = extractFloatx80Sign( b );
-    if ( aSign == bSign ) {
-        return addFloatx80Sigs(a, b, aSign, status);
-    }
-    else {
-        return subFloatx80Sigs(a, b, aSign, status);
-    }
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of subtracting the extended double-precision floating-
-| point values `a' and `b'.  The operation is performed according to the
-| IEC/IEEE Standard for Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-floatx80 floatx80_sub(floatx80 a, floatx80 b, float_status *status)
-{
-    flag aSign, bSign;
-
-    aSign = extractFloatx80Sign( a );
-    bSign = extractFloatx80Sign( b );
-    if ( aSign == bSign ) {
-        return subFloatx80Sigs(a, b, aSign, status);
-    }
-    else {
-        return addFloatx80Sigs(a, b, aSign, status);
-    }
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of multiplying the extended double-precision floating-
-| point values `a' and `b'.  The operation is performed according to the
-| IEC/IEEE Standard for Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-floatx80 floatx80_mul(floatx80 a, floatx80 b, float_status *status)
-{
-    flag aSign, bSign, zSign;
-    int32_t aExp, bExp, zExp;
-    uint64_t aSig, bSig, zSig0, zSig1;
-    floatx80 z;
-
-    aSig = extractFloatx80Frac( a );
-    aExp = extractFloatx80Exp( a );
-    aSign = extractFloatx80Sign( a );
-    bSig = extractFloatx80Frac( b );
-    bExp = extractFloatx80Exp( b );
-    bSign = extractFloatx80Sign( b );
-    zSign = aSign ^ bSign;
-    if ( aExp == 0x7FFF ) {
-        if (    (uint64_t) ( aSig<<1 )
-             || ( ( bExp == 0x7FFF ) && (uint64_t) ( bSig<<1 ) ) ) {
-            return propagateFloatx80NaN(a, b, status);
-        }
-        if ( ( bExp | bSig ) == 0 ) goto invalid;
-        return packFloatx80( zSign, 0x7FFF, LIT64( 0x8000000000000000 ) );
-    }
-    if ( bExp == 0x7FFF ) {
-        if ((uint64_t)(bSig << 1)) {
-            return propagateFloatx80NaN(a, b, status);
-        }
-        if ( ( aExp | aSig ) == 0 ) {
- invalid:
-            float_raise(float_flag_invalid, status);
-            z.low = floatx80_default_nan_low;
-            z.high = floatx80_default_nan_high;
-            return z;
-        }
-        return packFloatx80( zSign, 0x7FFF, LIT64( 0x8000000000000000 ) );
-    }
-    if ( aExp == 0 ) {
-        if ( aSig == 0 ) return packFloatx80( zSign, 0, 0 );
-        normalizeFloatx80Subnormal( aSig, &aExp, &aSig );
-    }
-    if ( bExp == 0 ) {
-        if ( bSig == 0 ) return packFloatx80( zSign, 0, 0 );
-        normalizeFloatx80Subnormal( bSig, &bExp, &bSig );
-    }
-    zExp = aExp + bExp - 0x3FFE;
-    mul64To128( aSig, bSig, &zSig0, &zSig1 );
-    if ( 0 < (int64_t) zSig0 ) {
-        shortShift128Left( zSig0, zSig1, 1, &zSig0, &zSig1 );
-        --zExp;
-    }
-    return roundAndPackFloatx80(status->floatx80_rounding_precision,
-                                zSign, zExp, zSig0, zSig1, status);
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of dividing the extended double-precision floating-point
-| value `a' by the corresponding value `b'.  The operation is performed
-| according to the IEC/IEEE Standard for Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-floatx80 floatx80_div(floatx80 a, floatx80 b, float_status *status)
-{
-    flag aSign, bSign, zSign;
-    int32_t aExp, bExp, zExp;
-    uint64_t aSig, bSig, zSig0, zSig1;
-    uint64_t rem0, rem1, rem2, term0, term1, term2;
-    floatx80 z;
-
-    aSig = extractFloatx80Frac( a );
-    aExp = extractFloatx80Exp( a );
-    aSign = extractFloatx80Sign( a );
-    bSig = extractFloatx80Frac( b );
-    bExp = extractFloatx80Exp( b );
-    bSign = extractFloatx80Sign( b );
-    zSign = aSign ^ bSign;
-    if ( aExp == 0x7FFF ) {
-        if ((uint64_t)(aSig << 1)) {
-            return propagateFloatx80NaN(a, b, status);
-        }
-        if ( bExp == 0x7FFF ) {
-            if ((uint64_t)(bSig << 1)) {
-                return propagateFloatx80NaN(a, b, status);
-            }
-            goto invalid;
-        }
-        return packFloatx80( zSign, 0x7FFF, LIT64( 0x8000000000000000 ) );
-    }
-    if ( bExp == 0x7FFF ) {
-        if ((uint64_t)(bSig << 1)) {
-            return propagateFloatx80NaN(a, b, status);
-        }
-        return packFloatx80( zSign, 0, 0 );
-    }
-    if ( bExp == 0 ) {
-        if ( bSig == 0 ) {
-            if ( ( aExp | aSig ) == 0 ) {
- invalid:
-                float_raise(float_flag_invalid, status);
-                z.low = floatx80_default_nan_low;
-                z.high = floatx80_default_nan_high;
-                return z;
-            }
-            float_raise(float_flag_divbyzero, status);
-            return packFloatx80( zSign, 0x7FFF, LIT64( 0x8000000000000000 ) );
-        }
-        normalizeFloatx80Subnormal( bSig, &bExp, &bSig );
-    }
-    if ( aExp == 0 ) {
-        if ( aSig == 0 ) return packFloatx80( zSign, 0, 0 );
-        normalizeFloatx80Subnormal( aSig, &aExp, &aSig );
-    }
-    zExp = aExp - bExp + 0x3FFE;
-    rem1 = 0;
-    if ( bSig <= aSig ) {
-        shift128Right( aSig, 0, 1, &aSig, &rem1 );
-        ++zExp;
-    }
-    zSig0 = estimateDiv128To64( aSig, rem1, bSig );
-    mul64To128( bSig, zSig0, &term0, &term1 );
-    sub128( aSig, rem1, term0, term1, &rem0, &rem1 );
-    while ( (int64_t) rem0 < 0 ) {
-        --zSig0;
-        add128( rem0, rem1, 0, bSig, &rem0, &rem1 );
-    }
-    zSig1 = estimateDiv128To64( rem1, 0, bSig );
-    if ( (uint64_t) ( zSig1<<1 ) <= 8 ) {
-        mul64To128( bSig, zSig1, &term1, &term2 );
-        sub128( rem1, 0, term1, term2, &rem1, &rem2 );
-        while ( (int64_t) rem1 < 0 ) {
-            --zSig1;
-            add128( rem1, rem2, 0, bSig, &rem1, &rem2 );
-        }
-        zSig1 |= ( ( rem1 | rem2 ) != 0 );
-    }
-    return roundAndPackFloatx80(status->floatx80_rounding_precision,
-                                zSign, zExp, zSig0, zSig1, status);
-}
-
-/*----------------------------------------------------------------------------
-| Returns the remainder of the extended double-precision floating-point value
-| `a' with respect to the corresponding value `b'.  The operation is performed
-| according to the IEC/IEEE Standard for Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-floatx80 floatx80_rem(floatx80 a, floatx80 b, float_status *status)
-{
-    flag aSign, zSign;
-    int32_t aExp, bExp, expDiff;
-    uint64_t aSig0, aSig1, bSig;
-    uint64_t q, term0, term1, alternateASig0, alternateASig1;
-    floatx80 z;
-
-    aSig0 = extractFloatx80Frac( a );
-    aExp = extractFloatx80Exp( a );
-    aSign = extractFloatx80Sign( a );
-    bSig = extractFloatx80Frac( b );
-    bExp = extractFloatx80Exp( b );
-    if ( aExp == 0x7FFF ) {
-        if (    (uint64_t) ( aSig0<<1 )
-             || ( ( bExp == 0x7FFF ) && (uint64_t) ( bSig<<1 ) ) ) {
-            return propagateFloatx80NaN(a, b, status);
-        }
-        goto invalid;
-    }
-    if ( bExp == 0x7FFF ) {
-        if ((uint64_t)(bSig << 1)) {
-            return propagateFloatx80NaN(a, b, status);
-        }
-        return a;
-    }
-    if ( bExp == 0 ) {
-        if ( bSig == 0 ) {
- invalid:
-            float_raise(float_flag_invalid, status);
-            z.low = floatx80_default_nan_low;
-            z.high = floatx80_default_nan_high;
-            return z;
-        }
-        normalizeFloatx80Subnormal( bSig, &bExp, &bSig );
-    }
-    if ( aExp == 0 ) {
-        if ( (uint64_t) ( aSig0<<1 ) == 0 ) return a;
-        normalizeFloatx80Subnormal( aSig0, &aExp, &aSig0 );
-    }
-    bSig |= LIT64( 0x8000000000000000 );
-    zSign = aSign;
-    expDiff = aExp - bExp;
-    aSig1 = 0;
-    if ( expDiff < 0 ) {
-        if ( expDiff < -1 ) return a;
-        shift128Right( aSig0, 0, 1, &aSig0, &aSig1 );
-        expDiff = 0;
-    }
-    q = ( bSig <= aSig0 );
-    if ( q ) aSig0 -= bSig;
-    expDiff -= 64;
-    while ( 0 < expDiff ) {
-        q = estimateDiv128To64( aSig0, aSig1, bSig );
-        q = ( 2 < q ) ? q - 2 : 0;
-        mul64To128( bSig, q, &term0, &term1 );
-        sub128( aSig0, aSig1, term0, term1, &aSig0, &aSig1 );
-        shortShift128Left( aSig0, aSig1, 62, &aSig0, &aSig1 );
-        expDiff -= 62;
-    }
-    expDiff += 64;
-    if ( 0 < expDiff ) {
-        q = estimateDiv128To64( aSig0, aSig1, bSig );
-        q = ( 2 < q ) ? q - 2 : 0;
-        q >>= 64 - expDiff;
-        mul64To128( bSig, q<<( 64 - expDiff ), &term0, &term1 );
-        sub128( aSig0, aSig1, term0, term1, &aSig0, &aSig1 );
-        shortShift128Left( 0, bSig, 64 - expDiff, &term0, &term1 );
-        while ( le128( term0, term1, aSig0, aSig1 ) ) {
-            ++q;
-            sub128( aSig0, aSig1, term0, term1, &aSig0, &aSig1 );
-        }
-    }
-    else {
-        term1 = 0;
-        term0 = bSig;
-    }
-    sub128( term0, term1, aSig0, aSig1, &alternateASig0, &alternateASig1 );
-    if (    lt128( alternateASig0, alternateASig1, aSig0, aSig1 )
-         || (    eq128( alternateASig0, alternateASig1, aSig0, aSig1 )
-              && ( q & 1 ) )
-       ) {
-        aSig0 = alternateASig0;
-        aSig1 = alternateASig1;
-        zSign = ! zSign;
-    }
-    return
-        normalizeRoundAndPackFloatx80(
-            80, zSign, bExp + expDiff, aSig0, aSig1, status);
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the square root of the extended double-precision floating-point
-| value `a'.  The operation is performed according to the IEC/IEEE Standard
-| for Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-floatx80 floatx80_sqrt(floatx80 a, float_status *status)
-{
-    flag aSign;
-    int32_t aExp, zExp;
-    uint64_t aSig0, aSig1, zSig0, zSig1, doubleZSig0;
-    uint64_t rem0, rem1, rem2, rem3, term0, term1, term2, term3;
-    floatx80 z;
-
-    aSig0 = extractFloatx80Frac( a );
-    aExp = extractFloatx80Exp( a );
-    aSign = extractFloatx80Sign( a );
-    if ( aExp == 0x7FFF ) {
-        if ((uint64_t)(aSig0 << 1)) {
-            return propagateFloatx80NaN(a, a, status);
-        }
-        if ( ! aSign ) return a;
-        goto invalid;
-    }
-    if ( aSign ) {
-        if ( ( aExp | aSig0 ) == 0 ) return a;
- invalid:
-        float_raise(float_flag_invalid, status);
-        z.low = floatx80_default_nan_low;
-        z.high = floatx80_default_nan_high;
-        return z;
-    }
-    if ( aExp == 0 ) {
-        if ( aSig0 == 0 ) return packFloatx80( 0, 0, 0 );
-        normalizeFloatx80Subnormal( aSig0, &aExp, &aSig0 );
-    }
-    zExp = ( ( aExp - 0x3FFF )>>1 ) + 0x3FFF;
-    zSig0 = estimateSqrt32( aExp, aSig0>>32 );
-    shift128Right( aSig0, 0, 2 + ( aExp & 1 ), &aSig0, &aSig1 );
-    zSig0 = estimateDiv128To64( aSig0, aSig1, zSig0<<32 ) + ( zSig0<<30 );
-    doubleZSig0 = zSig0<<1;
-    mul64To128( zSig0, zSig0, &term0, &term1 );
-    sub128( aSig0, aSig1, term0, term1, &rem0, &rem1 );
-    while ( (int64_t) rem0 < 0 ) {
-        --zSig0;
-        doubleZSig0 -= 2;
-        add128( rem0, rem1, zSig0>>63, doubleZSig0 | 1, &rem0, &rem1 );
-    }
-    zSig1 = estimateDiv128To64( rem1, 0, doubleZSig0 );
-    if ( ( zSig1 & LIT64( 0x3FFFFFFFFFFFFFFF ) ) <= 5 ) {
-        if ( zSig1 == 0 ) zSig1 = 1;
-        mul64To128( doubleZSig0, zSig1, &term1, &term2 );
-        sub128( rem1, 0, term1, term2, &rem1, &rem2 );
-        mul64To128( zSig1, zSig1, &term2, &term3 );
-        sub192( rem1, rem2, 0, 0, term2, term3, &rem1, &rem2, &rem3 );
-        while ( (int64_t) rem1 < 0 ) {
-            --zSig1;
-            shortShift128Left( 0, zSig1, 1, &term2, &term3 );
-            term3 |= 1;
-            term2 |= doubleZSig0;
-            add192( rem1, rem2, rem3, 0, term2, term3, &rem1, &rem2, &rem3 );
-        }
-        zSig1 |= ( ( rem1 | rem2 | rem3 ) != 0 );
-    }
-    shortShift128Left( 0, zSig1, 1, &zSig0, &zSig1 );
-    zSig0 |= doubleZSig0;
-    return roundAndPackFloatx80(status->floatx80_rounding_precision,
-                                0, zExp, zSig0, zSig1, status);
-}
-
-/*----------------------------------------------------------------------------
-| Returns 1 if the extended double-precision floating-point value `a' is equal
-| to the corresponding value `b', and 0 otherwise.  The invalid exception is
-| raised if either operand is a NaN.  Otherwise, the comparison is performed
-| according to the IEC/IEEE Standard for Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-int floatx80_eq(floatx80 a, floatx80 b, float_status *status)
-{
-
-    if (    (    ( extractFloatx80Exp( a ) == 0x7FFF )
-              && (uint64_t) ( extractFloatx80Frac( a )<<1 ) )
-         || (    ( extractFloatx80Exp( b ) == 0x7FFF )
-              && (uint64_t) ( extractFloatx80Frac( b )<<1 ) )
-       ) {
-        float_raise(float_flag_invalid, status);
-        return 0;
-    }
-    return
-           ( a.low == b.low )
-        && (    ( a.high == b.high )
-             || (    ( a.low == 0 )
-                  && ( (uint16_t) ( ( a.high | b.high )<<1 ) == 0 ) )
-           );
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns 1 if the extended double-precision floating-point value `a' is
-| less than or equal to the corresponding value `b', and 0 otherwise.  The
-| invalid exception is raised if either operand is a NaN.  The comparison is
-| performed according to the IEC/IEEE Standard for Binary Floating-Point
-| Arithmetic.
-*----------------------------------------------------------------------------*/
-
-int floatx80_le(floatx80 a, floatx80 b, float_status *status)
-{
-    flag aSign, bSign;
-
-    if (    (    ( extractFloatx80Exp( a ) == 0x7FFF )
-              && (uint64_t) ( extractFloatx80Frac( a )<<1 ) )
-         || (    ( extractFloatx80Exp( b ) == 0x7FFF )
-              && (uint64_t) ( extractFloatx80Frac( b )<<1 ) )
-       ) {
-        float_raise(float_flag_invalid, status);
-        return 0;
-    }
-    aSign = extractFloatx80Sign( a );
-    bSign = extractFloatx80Sign( b );
-    if ( aSign != bSign ) {
-        return
-               aSign
-            || (    ( ( (uint16_t) ( ( a.high | b.high )<<1 ) ) | a.low | b.low )
-                 == 0 );
-    }
-    return
-          aSign ? le128( b.high, b.low, a.high, a.low )
-        : le128( a.high, a.low, b.high, b.low );
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns 1 if the extended double-precision floating-point value `a' is
-| less than the corresponding value `b', and 0 otherwise.  The invalid
-| exception is raised if either operand is a NaN.  The comparison is performed
-| according to the IEC/IEEE Standard for Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-int floatx80_lt(floatx80 a, floatx80 b, float_status *status)
-{
-    flag aSign, bSign;
-
-    if (    (    ( extractFloatx80Exp( a ) == 0x7FFF )
-              && (uint64_t) ( extractFloatx80Frac( a )<<1 ) )
-         || (    ( extractFloatx80Exp( b ) == 0x7FFF )
-              && (uint64_t) ( extractFloatx80Frac( b )<<1 ) )
-       ) {
-        float_raise(float_flag_invalid, status);
-        return 0;
-    }
-    aSign = extractFloatx80Sign( a );
-    bSign = extractFloatx80Sign( b );
-    if ( aSign != bSign ) {
-        return
-               aSign
-            && (    ( ( (uint16_t) ( ( a.high | b.high )<<1 ) ) | a.low | b.low )
-                 != 0 );
-    }
-    return
-          aSign ? lt128( b.high, b.low, a.high, a.low )
-        : lt128( a.high, a.low, b.high, b.low );
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns 1 if the extended double-precision floating-point values `a' and `b'
-| cannot be compared, and 0 otherwise.  The invalid exception is raised if
-| either operand is a NaN.   The comparison is performed according to the
-| IEC/IEEE Standard for Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-int floatx80_unordered(floatx80 a, floatx80 b, float_status *status)
-{
-    if (    (    ( extractFloatx80Exp( a ) == 0x7FFF )
-              && (uint64_t) ( extractFloatx80Frac( a )<<1 ) )
-         || (    ( extractFloatx80Exp( b ) == 0x7FFF )
-              && (uint64_t) ( extractFloatx80Frac( b )<<1 ) )
-       ) {
-        float_raise(float_flag_invalid, status);
-        return 1;
-    }
-    return 0;
-}
-
-/*----------------------------------------------------------------------------
-| Returns 1 if the extended double-precision floating-point value `a' is
-| equal to the corresponding value `b', and 0 otherwise.  Quiet NaNs do not
-| cause an exception.  The comparison is performed according to the IEC/IEEE
-| Standard for Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-int floatx80_eq_quiet(floatx80 a, floatx80 b, float_status *status)
-{
-
-    if (    (    ( extractFloatx80Exp( a ) == 0x7FFF )
-              && (uint64_t) ( extractFloatx80Frac( a )<<1 ) )
-         || (    ( extractFloatx80Exp( b ) == 0x7FFF )
-              && (uint64_t) ( extractFloatx80Frac( b )<<1 ) )
-       ) {
-        if (    floatx80_is_signaling_nan( a )
-             || floatx80_is_signaling_nan( b ) ) {
-            float_raise(float_flag_invalid, status);
-        }
-        return 0;
-    }
-    return
-           ( a.low == b.low )
-        && (    ( a.high == b.high )
-             || (    ( a.low == 0 )
-                  && ( (uint16_t) ( ( a.high | b.high )<<1 ) == 0 ) )
-           );
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns 1 if the extended double-precision floating-point value `a' is less
-| than or equal to the corresponding value `b', and 0 otherwise.  Quiet NaNs
-| do not cause an exception.  Otherwise, the comparison is performed according
-| to the IEC/IEEE Standard for Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-int floatx80_le_quiet(floatx80 a, floatx80 b, float_status *status)
-{
-    flag aSign, bSign;
-
-    if (    (    ( extractFloatx80Exp( a ) == 0x7FFF )
-              && (uint64_t) ( extractFloatx80Frac( a )<<1 ) )
-         || (    ( extractFloatx80Exp( b ) == 0x7FFF )
-              && (uint64_t) ( extractFloatx80Frac( b )<<1 ) )
-       ) {
-        if (    floatx80_is_signaling_nan( a )
-             || floatx80_is_signaling_nan( b ) ) {
-            float_raise(float_flag_invalid, status);
-        }
-        return 0;
-    }
-    aSign = extractFloatx80Sign( a );
-    bSign = extractFloatx80Sign( b );
-    if ( aSign != bSign ) {
-        return
-               aSign
-            || (    ( ( (uint16_t) ( ( a.high | b.high )<<1 ) ) | a.low | b.low )
-                 == 0 );
-    }
-    return
-          aSign ? le128( b.high, b.low, a.high, a.low )
-        : le128( a.high, a.low, b.high, b.low );
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns 1 if the extended double-precision floating-point value `a' is less
-| than the corresponding value `b', and 0 otherwise.  Quiet NaNs do not cause
-| an exception.  Otherwise, the comparison is performed according to the
-| IEC/IEEE Standard for Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-int floatx80_lt_quiet(floatx80 a, floatx80 b, float_status *status)
-{
-    flag aSign, bSign;
-
-    if (    (    ( extractFloatx80Exp( a ) == 0x7FFF )
-              && (uint64_t) ( extractFloatx80Frac( a )<<1 ) )
-         || (    ( extractFloatx80Exp( b ) == 0x7FFF )
-              && (uint64_t) ( extractFloatx80Frac( b )<<1 ) )
-       ) {
-        if (    floatx80_is_signaling_nan( a )
-             || floatx80_is_signaling_nan( b ) ) {
-            float_raise(float_flag_invalid, status);
-        }
-        return 0;
-    }
-    aSign = extractFloatx80Sign( a );
-    bSign = extractFloatx80Sign( b );
-    if ( aSign != bSign ) {
-        return
-               aSign
-            && (    ( ( (uint16_t) ( ( a.high | b.high )<<1 ) ) | a.low | b.low )
-                 != 0 );
-    }
-    return
-          aSign ? lt128( b.high, b.low, a.high, a.low )
-        : lt128( a.high, a.low, b.high, b.low );
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns 1 if the extended double-precision floating-point values `a' and `b'
-| cannot be compared, and 0 otherwise.  Quiet NaNs do not cause an exception.
-| The comparison is performed according to the IEC/IEEE Standard for Binary
-| Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-int floatx80_unordered_quiet(floatx80 a, floatx80 b, float_status *status)
-{
-    if (    (    ( extractFloatx80Exp( a ) == 0x7FFF )
-              && (uint64_t) ( extractFloatx80Frac( a )<<1 ) )
-         || (    ( extractFloatx80Exp( b ) == 0x7FFF )
-              && (uint64_t) ( extractFloatx80Frac( b )<<1 ) )
-       ) {
-        if (    floatx80_is_signaling_nan( a )
-             || floatx80_is_signaling_nan( b ) ) {
-            float_raise(float_flag_invalid, status);
-        }
-        return 1;
-    }
-    return 0;
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of converting the quadruple-precision floating-point
-| value `a' to the 32-bit two's complement integer format.  The conversion
-| is performed according to the IEC/IEEE Standard for Binary Floating-Point
-| Arithmetic---which means in particular that the conversion is rounded
-| according to the current rounding mode.  If `a' is a NaN, the largest
-| positive integer is returned.  Otherwise, if the conversion overflows, the
-| largest integer with the same sign as `a' is returned.
-*----------------------------------------------------------------------------*/
-
-int32_t float128_to_int32(float128 a, float_status *status)
-{
-    flag aSign;
-    int32_t aExp, shiftCount;
-    uint64_t aSig0, aSig1;
-
-    aSig1 = extractFloat128Frac1( a );
-    aSig0 = extractFloat128Frac0( a );
-    aExp = extractFloat128Exp( a );
-    aSign = extractFloat128Sign( a );
-    if ( ( aExp == 0x7FFF ) && ( aSig0 | aSig1 ) ) aSign = 0;
-    if ( aExp ) aSig0 |= LIT64( 0x0001000000000000 );
-    aSig0 |= ( aSig1 != 0 );
-    shiftCount = 0x4028 - aExp;
-    if ( 0 < shiftCount ) shift64RightJamming( aSig0, shiftCount, &aSig0 );
-    return roundAndPackInt32(aSign, aSig0, status);
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of converting the quadruple-precision floating-point
-| value `a' to the 32-bit two's complement integer format.  The conversion
-| is performed according to the IEC/IEEE Standard for Binary Floating-Point
-| Arithmetic, except that the conversion is always rounded toward zero.  If
-| `a' is a NaN, the largest positive integer is returned.  Otherwise, if the
-| conversion overflows, the largest integer with the same sign as `a' is
-| returned.
-*----------------------------------------------------------------------------*/
-
-int32_t float128_to_int32_round_to_zero(float128 a, float_status *status)
-{
-    flag aSign;
-    int32_t aExp, shiftCount;
-    uint64_t aSig0, aSig1, savedASig;
-    int32_t z;
-
-    aSig1 = extractFloat128Frac1( a );
-    aSig0 = extractFloat128Frac0( a );
-    aExp = extractFloat128Exp( a );
-    aSign = extractFloat128Sign( a );
-    aSig0 |= ( aSig1 != 0 );
-    if ( 0x401E < aExp ) {
-        if ( ( aExp == 0x7FFF ) && aSig0 ) aSign = 0;
-        goto invalid;
-    }
-    else if ( aExp < 0x3FFF ) {
-        if (aExp || aSig0) {
-            status->float_exception_flags |= float_flag_inexact;
-        }
-        return 0;
-    }
-    aSig0 |= LIT64( 0x0001000000000000 );
-    shiftCount = 0x402F - aExp;
-    savedASig = aSig0;
-    aSig0 >>= shiftCount;
-    z = aSig0;
-    if ( aSign ) z = - z;
-    if ( ( z < 0 ) ^ aSign ) {
- invalid:
-        float_raise(float_flag_invalid, status);
-        return aSign ? (int32_t) 0x80000000 : 0x7FFFFFFF;
-    }
-    if ( ( aSig0<<shiftCount ) != savedASig ) {
-        status->float_exception_flags |= float_flag_inexact;
-    }
-    return z;
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of converting the quadruple-precision floating-point
-| value `a' to the 64-bit two's complement integer format.  The conversion
-| is performed according to the IEC/IEEE Standard for Binary Floating-Point
-| Arithmetic---which means in particular that the conversion is rounded
-| according to the current rounding mode.  If `a' is a NaN, the largest
-| positive integer is returned.  Otherwise, if the conversion overflows, the
-| largest integer with the same sign as `a' is returned.
-*----------------------------------------------------------------------------*/
-
-int64_t float128_to_int64(float128 a, float_status *status)
-{
-    flag aSign;
-    int32_t aExp, shiftCount;
-    uint64_t aSig0, aSig1;
-
-    aSig1 = extractFloat128Frac1( a );
-    aSig0 = extractFloat128Frac0( a );
-    aExp = extractFloat128Exp( a );
-    aSign = extractFloat128Sign( a );
-    if ( aExp ) aSig0 |= LIT64( 0x0001000000000000 );
-    shiftCount = 0x402F - aExp;
-    if ( shiftCount <= 0 ) {
-        if ( 0x403E < aExp ) {
-            float_raise(float_flag_invalid, status);
-            if (    ! aSign
-                 || (    ( aExp == 0x7FFF )
-                      && ( aSig1 || ( aSig0 != LIT64( 0x0001000000000000 ) ) )
-                    )
-               ) {
-                return LIT64( 0x7FFFFFFFFFFFFFFF );
-            }
-            return (int64_t) LIT64( 0x8000000000000000 );
-        }
-        shortShift128Left( aSig0, aSig1, - shiftCount, &aSig0, &aSig1 );
-    }
-    else {
-        shift64ExtraRightJamming( aSig0, aSig1, shiftCount, &aSig0, &aSig1 );
-    }
-    return roundAndPackInt64(aSign, aSig0, aSig1, status);
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of converting the quadruple-precision floating-point
-| value `a' to the 64-bit two's complement integer format.  The conversion
-| is performed according to the IEC/IEEE Standard for Binary Floating-Point
-| Arithmetic, except that the conversion is always rounded toward zero.
-| If `a' is a NaN, the largest positive integer is returned.  Otherwise, if
-| the conversion overflows, the largest integer with the same sign as `a' is
-| returned.
-*----------------------------------------------------------------------------*/
-
-int64_t float128_to_int64_round_to_zero(float128 a, float_status *status)
-{
-    flag aSign;
-    int32_t aExp, shiftCount;
-    uint64_t aSig0, aSig1;
-    int64_t z;
-
-    aSig1 = extractFloat128Frac1( a );
-    aSig0 = extractFloat128Frac0( a );
-    aExp = extractFloat128Exp( a );
-    aSign = extractFloat128Sign( a );
-    if ( aExp ) aSig0 |= LIT64( 0x0001000000000000 );
-    shiftCount = aExp - 0x402F;
-    if ( 0 < shiftCount ) {
-        if ( 0x403E <= aExp ) {
-            aSig0 &= LIT64( 0x0000FFFFFFFFFFFF );
-            if (    ( a.high == LIT64( 0xC03E000000000000 ) )
-                 && ( aSig1 < LIT64( 0x0002000000000000 ) ) ) {
-                if (aSig1) {
-                    status->float_exception_flags |= float_flag_inexact;
-                }
-            }
-            else {
-                float_raise(float_flag_invalid, status);
-                if ( ! aSign || ( ( aExp == 0x7FFF ) && ( aSig0 | aSig1 ) ) ) {
-                    return LIT64( 0x7FFFFFFFFFFFFFFF );
-                }
-            }
-            return (int64_t) LIT64( 0x8000000000000000 );
-        }
-        z = ( aSig0<<shiftCount ) | ( aSig1>>( ( - shiftCount ) & 63 ) );
-        if ( (uint64_t) ( aSig1<<shiftCount ) ) {
-            status->float_exception_flags |= float_flag_inexact;
-        }
-    }
-    else {
-        if ( aExp < 0x3FFF ) {
-            if ( aExp | aSig0 | aSig1 ) {
-                status->float_exception_flags |= float_flag_inexact;
-            }
-            return 0;
-        }
-        z = aSig0>>( - shiftCount );
-        if (    aSig1
-             || ( shiftCount && (uint64_t) ( aSig0<<( shiftCount & 63 ) ) ) ) {
-            status->float_exception_flags |= float_flag_inexact;
-        }
-    }
-    if ( aSign ) z = - z;
-    return z;
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of converting the quadruple-precision floating-point
-| value `a' to the single-precision floating-point format.  The conversion
-| is performed according to the IEC/IEEE Standard for Binary Floating-Point
-| Arithmetic.
-*----------------------------------------------------------------------------*/
-
-float32 float128_to_float32(float128 a, float_status *status)
-{
-    flag aSign;
-    int32_t aExp;
-    uint64_t aSig0, aSig1;
-    uint32_t zSig;
-
-    aSig1 = extractFloat128Frac1( a );
-    aSig0 = extractFloat128Frac0( a );
-    aExp = extractFloat128Exp( a );
-    aSign = extractFloat128Sign( a );
-    if ( aExp == 0x7FFF ) {
-        if ( aSig0 | aSig1 ) {
-            return commonNaNToFloat32(float128ToCommonNaN(a, status), status);
-        }
-        return packFloat32( aSign, 0xFF, 0 );
-    }
-    aSig0 |= ( aSig1 != 0 );
-    shift64RightJamming( aSig0, 18, &aSig0 );
-    zSig = aSig0;
-    if ( aExp || zSig ) {
-        zSig |= 0x40000000;
-        aExp -= 0x3F81;
-    }
-    return roundAndPackFloat32(aSign, aExp, zSig, status);
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of converting the quadruple-precision floating-point
-| value `a' to the double-precision floating-point format.  The conversion
-| is performed according to the IEC/IEEE Standard for Binary Floating-Point
-| Arithmetic.
-*----------------------------------------------------------------------------*/
-
-float64 float128_to_float64(float128 a, float_status *status)
-{
-    flag aSign;
-    int32_t aExp;
-    uint64_t aSig0, aSig1;
-
-    aSig1 = extractFloat128Frac1( a );
-    aSig0 = extractFloat128Frac0( a );
-    aExp = extractFloat128Exp( a );
-    aSign = extractFloat128Sign( a );
-    if ( aExp == 0x7FFF ) {
-        if ( aSig0 | aSig1 ) {
-            return commonNaNToFloat64(float128ToCommonNaN(a, status), status);
-        }
-        return packFloat64( aSign, 0x7FF, 0 );
-    }
-    shortShift128Left( aSig0, aSig1, 14, &aSig0, &aSig1 );
-    aSig0 |= ( aSig1 != 0 );
-    if ( aExp || aSig0 ) {
-        aSig0 |= LIT64( 0x4000000000000000 );
-        aExp -= 0x3C01;
-    }
-    return roundAndPackFloat64(aSign, aExp, aSig0, status);
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of converting the quadruple-precision floating-point
-| value `a' to the extended double-precision floating-point format.  The
-| conversion is performed according to the IEC/IEEE Standard for Binary
-| Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-floatx80 float128_to_floatx80(float128 a, float_status *status)
-{
-    flag aSign;
-    int32_t aExp;
-    uint64_t aSig0, aSig1;
-
-    aSig1 = extractFloat128Frac1( a );
-    aSig0 = extractFloat128Frac0( a );
-    aExp = extractFloat128Exp( a );
-    aSign = extractFloat128Sign( a );
-    if ( aExp == 0x7FFF ) {
-        if ( aSig0 | aSig1 ) {
-            return commonNaNToFloatx80(float128ToCommonNaN(a, status), status);
-        }
-        return packFloatx80( aSign, 0x7FFF, LIT64( 0x8000000000000000 ) );
-    }
-    if ( aExp == 0 ) {
-        if ( ( aSig0 | aSig1 ) == 0 ) return packFloatx80( aSign, 0, 0 );
-        normalizeFloat128Subnormal( aSig0, aSig1, &aExp, &aSig0, &aSig1 );
-    }
-    else {
-        aSig0 |= LIT64( 0x0001000000000000 );
-    }
-    shortShift128Left( aSig0, aSig1, 15, &aSig0, &aSig1 );
-    return roundAndPackFloatx80(80, aSign, aExp, aSig0, aSig1, status);
-
-}
-
-/*----------------------------------------------------------------------------
-| Rounds the quadruple-precision floating-point value `a' to an integer, and
-| returns the result as a quadruple-precision floating-point value.  The
-| operation is performed according to the IEC/IEEE Standard for Binary
-| Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-float128 float128_round_to_int(float128 a, float_status *status)
-{
-    flag aSign;
-    int32_t aExp;
-    uint64_t lastBitMask, roundBitsMask;
-    float128 z;
-
-    aExp = extractFloat128Exp( a );
-    if ( 0x402F <= aExp ) {
-        if ( 0x406F <= aExp ) {
-            if (    ( aExp == 0x7FFF )
-                 && ( extractFloat128Frac0( a ) | extractFloat128Frac1( a ) )
-               ) {
-                return propagateFloat128NaN(a, a, status);
-            }
-            return a;
-        }
-        lastBitMask = 1;
-        lastBitMask = ( lastBitMask<<( 0x406E - aExp ) )<<1;
-        roundBitsMask = lastBitMask - 1;
-        z = a;
-        switch (status->float_rounding_mode) {
-        case float_round_nearest_even:
-            if ( lastBitMask ) {
-                add128( z.high, z.low, 0, lastBitMask>>1, &z.high, &z.low );
-                if ( ( z.low & roundBitsMask ) == 0 ) z.low &= ~ lastBitMask;
-            }
-            else {
-                if ( (int64_t) z.low < 0 ) {
-                    ++z.high;
-                    if ( (uint64_t) ( z.low<<1 ) == 0 ) z.high &= ~1;
-                }
-            }
-            break;
-        case float_round_ties_away:
-            if (lastBitMask) {
-                add128(z.high, z.low, 0, lastBitMask >> 1, &z.high, &z.low);
-            } else {
-                if ((int64_t) z.low < 0) {
-                    ++z.high;
-                }
-            }
-            break;
-        case float_round_to_zero:
-            break;
-        case float_round_up:
-            if (!extractFloat128Sign(z)) {
-                add128(z.high, z.low, 0, roundBitsMask, &z.high, &z.low);
-            }
-            break;
-        case float_round_down:
-            if (extractFloat128Sign(z)) {
-                add128(z.high, z.low, 0, roundBitsMask, &z.high, &z.low);
-            }
-            break;
-        default:
-            abort();
-        }
-        z.low &= ~ roundBitsMask;
-    }
-    else {
-        if ( aExp < 0x3FFF ) {
-            if ( ( ( (uint64_t) ( a.high<<1 ) ) | a.low ) == 0 ) return a;
-            status->float_exception_flags |= float_flag_inexact;
-            aSign = extractFloat128Sign( a );
-            switch (status->float_rounding_mode) {
-             case float_round_nearest_even:
-                if (    ( aExp == 0x3FFE )
-                     && (   extractFloat128Frac0( a )
-                          | extractFloat128Frac1( a ) )
-                   ) {
-                    return packFloat128( aSign, 0x3FFF, 0, 0 );
-                }
-                break;
-            case float_round_ties_away:
-                if (aExp == 0x3FFE) {
-                    return packFloat128(aSign, 0x3FFF, 0, 0);
-                }
-                break;
-             case float_round_down:
-                return
-                      aSign ? packFloat128( 1, 0x3FFF, 0, 0 )
-                    : packFloat128( 0, 0, 0, 0 );
-             case float_round_up:
-                return
-                      aSign ? packFloat128( 1, 0, 0, 0 )
-                    : packFloat128( 0, 0x3FFF, 0, 0 );
-            }
-            return packFloat128( aSign, 0, 0, 0 );
-        }
-        lastBitMask = 1;
-        lastBitMask <<= 0x402F - aExp;
-        roundBitsMask = lastBitMask - 1;
-        z.low = 0;
-        z.high = a.high;
-        switch (status->float_rounding_mode) {
-        case float_round_nearest_even:
-            z.high += lastBitMask>>1;
-            if ( ( ( z.high & roundBitsMask ) | a.low ) == 0 ) {
-                z.high &= ~ lastBitMask;
-            }
-            break;
-        case float_round_ties_away:
-            z.high += lastBitMask>>1;
-            break;
-        case float_round_to_zero:
-            break;
-        case float_round_up:
-            if (!extractFloat128Sign(z)) {
-                z.high |= ( a.low != 0 );
-                z.high += roundBitsMask;
-            }
-            break;
-        case float_round_down:
-            if (extractFloat128Sign(z)) {
-                z.high |= (a.low != 0);
-                z.high += roundBitsMask;
-            }
-            break;
-        default:
-            abort();
-        }
-        z.high &= ~ roundBitsMask;
-    }
-    if ( ( z.low != a.low ) || ( z.high != a.high ) ) {
-        status->float_exception_flags |= float_flag_inexact;
-    }
-    return z;
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of adding the absolute values of the quadruple-precision
-| floating-point values `a' and `b'.  If `zSign' is 1, the sum is negated
-| before being returned.  `zSign' is ignored if the result is a NaN.
-| The addition is performed according to the IEC/IEEE Standard for Binary
-| Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-static float128 addFloat128Sigs(float128 a, float128 b, flag zSign,
-                                float_status *status)
-{
-    int32_t aExp, bExp, zExp;
-    uint64_t aSig0, aSig1, bSig0, bSig1, zSig0, zSig1, zSig2;
-    int32_t expDiff;
-
-    aSig1 = extractFloat128Frac1( a );
-    aSig0 = extractFloat128Frac0( a );
-    aExp = extractFloat128Exp( a );
-    bSig1 = extractFloat128Frac1( b );
-    bSig0 = extractFloat128Frac0( b );
-    bExp = extractFloat128Exp( b );
-    expDiff = aExp - bExp;
-    if ( 0 < expDiff ) {
-        if ( aExp == 0x7FFF ) {
-            if (aSig0 | aSig1) {
-                return propagateFloat128NaN(a, b, status);
-            }
-            return a;
-        }
-        if ( bExp == 0 ) {
-            --expDiff;
-        }
-        else {
-            bSig0 |= LIT64( 0x0001000000000000 );
-        }
-        shift128ExtraRightJamming(
-            bSig0, bSig1, 0, expDiff, &bSig0, &bSig1, &zSig2 );
-        zExp = aExp;
-    }
-    else if ( expDiff < 0 ) {
-        if ( bExp == 0x7FFF ) {
-            if (bSig0 | bSig1) {
-                return propagateFloat128NaN(a, b, status);
-            }
-            return packFloat128( zSign, 0x7FFF, 0, 0 );
-        }
-        if ( aExp == 0 ) {
-            ++expDiff;
-        }
-        else {
-            aSig0 |= LIT64( 0x0001000000000000 );
-        }
-        shift128ExtraRightJamming(
-            aSig0, aSig1, 0, - expDiff, &aSig0, &aSig1, &zSig2 );
-        zExp = bExp;
-    }
-    else {
-        if ( aExp == 0x7FFF ) {
-            if ( aSig0 | aSig1 | bSig0 | bSig1 ) {
-                return propagateFloat128NaN(a, b, status);
-            }
-            return a;
-        }
-        add128( aSig0, aSig1, bSig0, bSig1, &zSig0, &zSig1 );
-        if ( aExp == 0 ) {
-            if (status->flush_to_zero) {
-                if (zSig0 | zSig1) {
-                    float_raise(float_flag_output_denormal, status);
-                }
-                return packFloat128(zSign, 0, 0, 0);
-            }
-            return packFloat128( zSign, 0, zSig0, zSig1 );
-        }
-        zSig2 = 0;
-        zSig0 |= LIT64( 0x0002000000000000 );
-        zExp = aExp;
-        goto shiftRight1;
-    }
-    aSig0 |= LIT64( 0x0001000000000000 );
-    add128( aSig0, aSig1, bSig0, bSig1, &zSig0, &zSig1 );
-    --zExp;
-    if ( zSig0 < LIT64( 0x0002000000000000 ) ) goto roundAndPack;
-    ++zExp;
- shiftRight1:
-    shift128ExtraRightJamming(
-        zSig0, zSig1, zSig2, 1, &zSig0, &zSig1, &zSig2 );
- roundAndPack:
-    return roundAndPackFloat128(zSign, zExp, zSig0, zSig1, zSig2, status);
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of subtracting the absolute values of the quadruple-
-| precision floating-point values `a' and `b'.  If `zSign' is 1, the
-| difference is negated before being returned.  `zSign' is ignored if the
-| result is a NaN.  The subtraction is performed according to the IEC/IEEE
-| Standard for Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-static float128 subFloat128Sigs(float128 a, float128 b, flag zSign,
-                                float_status *status)
-{
-    int32_t aExp, bExp, zExp;
-    uint64_t aSig0, aSig1, bSig0, bSig1, zSig0, zSig1;
-    int32_t expDiff;
-    float128 z;
-
-    aSig1 = extractFloat128Frac1( a );
-    aSig0 = extractFloat128Frac0( a );
-    aExp = extractFloat128Exp( a );
-    bSig1 = extractFloat128Frac1( b );
-    bSig0 = extractFloat128Frac0( b );
-    bExp = extractFloat128Exp( b );
-    expDiff = aExp - bExp;
-    shortShift128Left( aSig0, aSig1, 14, &aSig0, &aSig1 );
-    shortShift128Left( bSig0, bSig1, 14, &bSig0, &bSig1 );
-    if ( 0 < expDiff ) goto aExpBigger;
-    if ( expDiff < 0 ) goto bExpBigger;
-    if ( aExp == 0x7FFF ) {
-        if ( aSig0 | aSig1 | bSig0 | bSig1 ) {
-            return propagateFloat128NaN(a, b, status);
-        }
-        float_raise(float_flag_invalid, status);
-        z.low = float128_default_nan_low;
-        z.high = float128_default_nan_high;
-        return z;
-    }
-    if ( aExp == 0 ) {
-        aExp = 1;
-        bExp = 1;
-    }
-    if ( bSig0 < aSig0 ) goto aBigger;
-    if ( aSig0 < bSig0 ) goto bBigger;
-    if ( bSig1 < aSig1 ) goto aBigger;
-    if ( aSig1 < bSig1 ) goto bBigger;
-    return packFloat128(status->float_rounding_mode == float_round_down,
-                        0, 0, 0);
- bExpBigger:
-    if ( bExp == 0x7FFF ) {
-        if (bSig0 | bSig1) {
-            return propagateFloat128NaN(a, b, status);
-        }
-        return packFloat128( zSign ^ 1, 0x7FFF, 0, 0 );
-    }
-    if ( aExp == 0 ) {
-        ++expDiff;
-    }
-    else {
-        aSig0 |= LIT64( 0x4000000000000000 );
-    }
-    shift128RightJamming( aSig0, aSig1, - expDiff, &aSig0, &aSig1 );
-    bSig0 |= LIT64( 0x4000000000000000 );
- bBigger:
-    sub128( bSig0, bSig1, aSig0, aSig1, &zSig0, &zSig1 );
-    zExp = bExp;
-    zSign ^= 1;
-    goto normalizeRoundAndPack;
- aExpBigger:
-    if ( aExp == 0x7FFF ) {
-        if (aSig0 | aSig1) {
-            return propagateFloat128NaN(a, b, status);
-        }
-        return a;
-    }
-    if ( bExp == 0 ) {
-        --expDiff;
-    }
-    else {
-        bSig0 |= LIT64( 0x4000000000000000 );
-    }
-    shift128RightJamming( bSig0, bSig1, expDiff, &bSig0, &bSig1 );
-    aSig0 |= LIT64( 0x4000000000000000 );
- aBigger:
-    sub128( aSig0, aSig1, bSig0, bSig1, &zSig0, &zSig1 );
-    zExp = aExp;
- normalizeRoundAndPack:
-    --zExp;
-    return normalizeRoundAndPackFloat128(zSign, zExp - 14, zSig0, zSig1,
-                                         status);
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of adding the quadruple-precision floating-point values
-| `a' and `b'.  The operation is performed according to the IEC/IEEE Standard
-| for Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-float128 float128_add(float128 a, float128 b, float_status *status)
-{
-    flag aSign, bSign;
-
-    aSign = extractFloat128Sign( a );
-    bSign = extractFloat128Sign( b );
-    if ( aSign == bSign ) {
-        return addFloat128Sigs(a, b, aSign, status);
-    }
-    else {
-        return subFloat128Sigs(a, b, aSign, status);
-    }
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of subtracting the quadruple-precision floating-point
-| values `a' and `b'.  The operation is performed according to the IEC/IEEE
-| Standard for Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-float128 float128_sub(float128 a, float128 b, float_status *status)
-{
-    flag aSign, bSign;
-
-    aSign = extractFloat128Sign( a );
-    bSign = extractFloat128Sign( b );
-    if ( aSign == bSign ) {
-        return subFloat128Sigs(a, b, aSign, status);
-    }
-    else {
-        return addFloat128Sigs(a, b, aSign, status);
-    }
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of multiplying the quadruple-precision floating-point
-| values `a' and `b'.  The operation is performed according to the IEC/IEEE
-| Standard for Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-float128 float128_mul(float128 a, float128 b, float_status *status)
-{
-    flag aSign, bSign, zSign;
-    int32_t aExp, bExp, zExp;
-    uint64_t aSig0, aSig1, bSig0, bSig1, zSig0, zSig1, zSig2, zSig3;
-    float128 z;
-
-    aSig1 = extractFloat128Frac1( a );
-    aSig0 = extractFloat128Frac0( a );
-    aExp = extractFloat128Exp( a );
-    aSign = extractFloat128Sign( a );
-    bSig1 = extractFloat128Frac1( b );
-    bSig0 = extractFloat128Frac0( b );
-    bExp = extractFloat128Exp( b );
-    bSign = extractFloat128Sign( b );
-    zSign = aSign ^ bSign;
-    if ( aExp == 0x7FFF ) {
-        if (    ( aSig0 | aSig1 )
-             || ( ( bExp == 0x7FFF ) && ( bSig0 | bSig1 ) ) ) {
-            return propagateFloat128NaN(a, b, status);
-        }
-        if ( ( bExp | bSig0 | bSig1 ) == 0 ) goto invalid;
-        return packFloat128( zSign, 0x7FFF, 0, 0 );
-    }
-    if ( bExp == 0x7FFF ) {
-        if (bSig0 | bSig1) {
-            return propagateFloat128NaN(a, b, status);
-        }
-        if ( ( aExp | aSig0 | aSig1 ) == 0 ) {
- invalid:
-            float_raise(float_flag_invalid, status);
-            z.low = float128_default_nan_low;
-            z.high = float128_default_nan_high;
-            return z;
-        }
-        return packFloat128( zSign, 0x7FFF, 0, 0 );
-    }
-    if ( aExp == 0 ) {
-        if ( ( aSig0 | aSig1 ) == 0 ) return packFloat128( zSign, 0, 0, 0 );
-        normalizeFloat128Subnormal( aSig0, aSig1, &aExp, &aSig0, &aSig1 );
-    }
-    if ( bExp == 0 ) {
-        if ( ( bSig0 | bSig1 ) == 0 ) return packFloat128( zSign, 0, 0, 0 );
-        normalizeFloat128Subnormal( bSig0, bSig1, &bExp, &bSig0, &bSig1 );
-    }
-    zExp = aExp + bExp - 0x4000;
-    aSig0 |= LIT64( 0x0001000000000000 );
-    shortShift128Left( bSig0, bSig1, 16, &bSig0, &bSig1 );
-    mul128To256( aSig0, aSig1, bSig0, bSig1, &zSig0, &zSig1, &zSig2, &zSig3 );
-    add128( zSig0, zSig1, aSig0, aSig1, &zSig0, &zSig1 );
-    zSig2 |= ( zSig3 != 0 );
-    if ( LIT64( 0x0002000000000000 ) <= zSig0 ) {
-        shift128ExtraRightJamming(
-            zSig0, zSig1, zSig2, 1, &zSig0, &zSig1, &zSig2 );
-        ++zExp;
-    }
-    return roundAndPackFloat128(zSign, zExp, zSig0, zSig1, zSig2, status);
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of dividing the quadruple-precision floating-point value
-| `a' by the corresponding value `b'.  The operation is performed according to
-| the IEC/IEEE Standard for Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-float128 float128_div(float128 a, float128 b, float_status *status)
-{
-    flag aSign, bSign, zSign;
-    int32_t aExp, bExp, zExp;
-    uint64_t aSig0, aSig1, bSig0, bSig1, zSig0, zSig1, zSig2;
-    uint64_t rem0, rem1, rem2, rem3, term0, term1, term2, term3;
-    float128 z;
-
-    aSig1 = extractFloat128Frac1( a );
-    aSig0 = extractFloat128Frac0( a );
-    aExp = extractFloat128Exp( a );
-    aSign = extractFloat128Sign( a );
-    bSig1 = extractFloat128Frac1( b );
-    bSig0 = extractFloat128Frac0( b );
-    bExp = extractFloat128Exp( b );
-    bSign = extractFloat128Sign( b );
-    zSign = aSign ^ bSign;
-    if ( aExp == 0x7FFF ) {
-        if (aSig0 | aSig1) {
-            return propagateFloat128NaN(a, b, status);
-        }
-        if ( bExp == 0x7FFF ) {
-            if (bSig0 | bSig1) {
-                return propagateFloat128NaN(a, b, status);
-            }
-            goto invalid;
-        }
-        return packFloat128( zSign, 0x7FFF, 0, 0 );
-    }
-    if ( bExp == 0x7FFF ) {
-        if (bSig0 | bSig1) {
-            return propagateFloat128NaN(a, b, status);
-        }
-        return packFloat128( zSign, 0, 0, 0 );
-    }
-    if ( bExp == 0 ) {
-        if ( ( bSig0 | bSig1 ) == 0 ) {
-            if ( ( aExp | aSig0 | aSig1 ) == 0 ) {
- invalid:
-                float_raise(float_flag_invalid, status);
-                z.low = float128_default_nan_low;
-                z.high = float128_default_nan_high;
-                return z;
-            }
-            float_raise(float_flag_divbyzero, status);
-            return packFloat128( zSign, 0x7FFF, 0, 0 );
-        }
-        normalizeFloat128Subnormal( bSig0, bSig1, &bExp, &bSig0, &bSig1 );
-    }
-    if ( aExp == 0 ) {
-        if ( ( aSig0 | aSig1 ) == 0 ) return packFloat128( zSign, 0, 0, 0 );
-        normalizeFloat128Subnormal( aSig0, aSig1, &aExp, &aSig0, &aSig1 );
-    }
-    zExp = aExp - bExp + 0x3FFD;
-    shortShift128Left(
-        aSig0 | LIT64( 0x0001000000000000 ), aSig1, 15, &aSig0, &aSig1 );
-    shortShift128Left(
-        bSig0 | LIT64( 0x0001000000000000 ), bSig1, 15, &bSig0, &bSig1 );
-    if ( le128( bSig0, bSig1, aSig0, aSig1 ) ) {
-        shift128Right( aSig0, aSig1, 1, &aSig0, &aSig1 );
-        ++zExp;
-    }
-    zSig0 = estimateDiv128To64( aSig0, aSig1, bSig0 );
-    mul128By64To192( bSig0, bSig1, zSig0, &term0, &term1, &term2 );
-    sub192( aSig0, aSig1, 0, term0, term1, term2, &rem0, &rem1, &rem2 );
-    while ( (int64_t) rem0 < 0 ) {
-        --zSig0;
-        add192( rem0, rem1, rem2, 0, bSig0, bSig1, &rem0, &rem1, &rem2 );
-    }
-    zSig1 = estimateDiv128To64( rem1, rem2, bSig0 );
-    if ( ( zSig1 & 0x3FFF ) <= 4 ) {
-        mul128By64To192( bSig0, bSig1, zSig1, &term1, &term2, &term3 );
-        sub192( rem1, rem2, 0, term1, term2, term3, &rem1, &rem2, &rem3 );
-        while ( (int64_t) rem1 < 0 ) {
-            --zSig1;
-            add192( rem1, rem2, rem3, 0, bSig0, bSig1, &rem1, &rem2, &rem3 );
-        }
-        zSig1 |= ( ( rem1 | rem2 | rem3 ) != 0 );
-    }
-    shift128ExtraRightJamming( zSig0, zSig1, 0, 15, &zSig0, &zSig1, &zSig2 );
-    return roundAndPackFloat128(zSign, zExp, zSig0, zSig1, zSig2, status);
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns the remainder of the quadruple-precision floating-point value `a'
-| with respect to the corresponding value `b'.  The operation is performed
-| according to the IEC/IEEE Standard for Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-float128 float128_rem(float128 a, float128 b, float_status *status)
-{
-    flag aSign, zSign;
-    int32_t aExp, bExp, expDiff;
-    uint64_t aSig0, aSig1, bSig0, bSig1, q, term0, term1, term2;
-    uint64_t allZero, alternateASig0, alternateASig1, sigMean1;
-    int64_t sigMean0;
-    float128 z;
-
-    aSig1 = extractFloat128Frac1( a );
-    aSig0 = extractFloat128Frac0( a );
-    aExp = extractFloat128Exp( a );
-    aSign = extractFloat128Sign( a );
-    bSig1 = extractFloat128Frac1( b );
-    bSig0 = extractFloat128Frac0( b );
-    bExp = extractFloat128Exp( b );
-    if ( aExp == 0x7FFF ) {
-        if (    ( aSig0 | aSig1 )
-             || ( ( bExp == 0x7FFF ) && ( bSig0 | bSig1 ) ) ) {
-            return propagateFloat128NaN(a, b, status);
-        }
-        goto invalid;
-    }
-    if ( bExp == 0x7FFF ) {
-        if (bSig0 | bSig1) {
-            return propagateFloat128NaN(a, b, status);
-        }
-        return a;
-    }
-    if ( bExp == 0 ) {
-        if ( ( bSig0 | bSig1 ) == 0 ) {
- invalid:
-            float_raise(float_flag_invalid, status);
-            z.low = float128_default_nan_low;
-            z.high = float128_default_nan_high;
-            return z;
-        }
-        normalizeFloat128Subnormal( bSig0, bSig1, &bExp, &bSig0, &bSig1 );
-    }
-    if ( aExp == 0 ) {
-        if ( ( aSig0 | aSig1 ) == 0 ) return a;
-        normalizeFloat128Subnormal( aSig0, aSig1, &aExp, &aSig0, &aSig1 );
-    }
-    expDiff = aExp - bExp;
-    if ( expDiff < -1 ) return a;
-    shortShift128Left(
-        aSig0 | LIT64( 0x0001000000000000 ),
-        aSig1,
-        15 - ( expDiff < 0 ),
-        &aSig0,
-        &aSig1
-    );
-    shortShift128Left(
-        bSig0 | LIT64( 0x0001000000000000 ), bSig1, 15, &bSig0, &bSig1 );
-    q = le128( bSig0, bSig1, aSig0, aSig1 );
-    if ( q ) sub128( aSig0, aSig1, bSig0, bSig1, &aSig0, &aSig1 );
-    expDiff -= 64;
-    while ( 0 < expDiff ) {
-        q = estimateDiv128To64( aSig0, aSig1, bSig0 );
-        q = ( 4 < q ) ? q - 4 : 0;
-        mul128By64To192( bSig0, bSig1, q, &term0, &term1, &term2 );
-        shortShift192Left( term0, term1, term2, 61, &term1, &term2, &allZero );
-        shortShift128Left( aSig0, aSig1, 61, &aSig0, &allZero );
-        sub128( aSig0, 0, term1, term2, &aSig0, &aSig1 );
-        expDiff -= 61;
-    }
-    if ( -64 < expDiff ) {
-        q = estimateDiv128To64( aSig0, aSig1, bSig0 );
-        q = ( 4 < q ) ? q - 4 : 0;
-        q >>= - expDiff;
-        shift128Right( bSig0, bSig1, 12, &bSig0, &bSig1 );
-        expDiff += 52;
-        if ( expDiff < 0 ) {
-            shift128Right( aSig0, aSig1, - expDiff, &aSig0, &aSig1 );
-        }
-        else {
-            shortShift128Left( aSig0, aSig1, expDiff, &aSig0, &aSig1 );
-        }
-        mul128By64To192( bSig0, bSig1, q, &term0, &term1, &term2 );
-        sub128( aSig0, aSig1, term1, term2, &aSig0, &aSig1 );
-    }
-    else {
-        shift128Right( aSig0, aSig1, 12, &aSig0, &aSig1 );
-        shift128Right( bSig0, bSig1, 12, &bSig0, &bSig1 );
-    }
-    do {
-        alternateASig0 = aSig0;
-        alternateASig1 = aSig1;
-        ++q;
-        sub128( aSig0, aSig1, bSig0, bSig1, &aSig0, &aSig1 );
-    } while ( 0 <= (int64_t) aSig0 );
-    add128(
-        aSig0, aSig1, alternateASig0, alternateASig1, (uint64_t *)&sigMean0, &sigMean1 );
-    if (    ( sigMean0 < 0 )
-         || ( ( ( sigMean0 | sigMean1 ) == 0 ) && ( q & 1 ) ) ) {
-        aSig0 = alternateASig0;
-        aSig1 = alternateASig1;
-    }
-    zSign = ( (int64_t) aSig0 < 0 );
-    if ( zSign ) sub128( 0, 0, aSig0, aSig1, &aSig0, &aSig1 );
-    return normalizeRoundAndPackFloat128(aSign ^ zSign, bExp - 4, aSig0, aSig1,
-                                         status);
-}
-
-/*----------------------------------------------------------------------------
-| Returns the square root of the quadruple-precision floating-point value `a'.
-| The operation is performed according to the IEC/IEEE Standard for Binary
-| Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-float128 float128_sqrt(float128 a, float_status *status)
-{
-    flag aSign;
-    int32_t aExp, zExp;
-    uint64_t aSig0, aSig1, zSig0, zSig1, zSig2, doubleZSig0;
-    uint64_t rem0, rem1, rem2, rem3, term0, term1, term2, term3;
-    float128 z;
-
-    aSig1 = extractFloat128Frac1( a );
-    aSig0 = extractFloat128Frac0( a );
-    aExp = extractFloat128Exp( a );
-    aSign = extractFloat128Sign( a );
-    if ( aExp == 0x7FFF ) {
-        if (aSig0 | aSig1) {
-            return propagateFloat128NaN(a, a, status);
-        }
-        if ( ! aSign ) return a;
-        goto invalid;
-    }
-    if ( aSign ) {
-        if ( ( aExp | aSig0 | aSig1 ) == 0 ) return a;
- invalid:
-        float_raise(float_flag_invalid, status);
-        z.low = float128_default_nan_low;
-        z.high = float128_default_nan_high;
-        return z;
-    }
-    if ( aExp == 0 ) {
-        if ( ( aSig0 | aSig1 ) == 0 ) return packFloat128( 0, 0, 0, 0 );
-        normalizeFloat128Subnormal( aSig0, aSig1, &aExp, &aSig0, &aSig1 );
-    }
-    zExp = ( ( aExp - 0x3FFF )>>1 ) + 0x3FFE;
-    aSig0 |= LIT64( 0x0001000000000000 );
-    zSig0 = estimateSqrt32( aExp, aSig0>>17 );
-    shortShift128Left( aSig0, aSig1, 13 - ( aExp & 1 ), &aSig0, &aSig1 );
-    zSig0 = estimateDiv128To64( aSig0, aSig1, zSig0<<32 ) + ( zSig0<<30 );
-    doubleZSig0 = zSig0<<1;
-    mul64To128( zSig0, zSig0, &term0, &term1 );
-    sub128( aSig0, aSig1, term0, term1, &rem0, &rem1 );
-    while ( (int64_t) rem0 < 0 ) {
-        --zSig0;
-        doubleZSig0 -= 2;
-        add128( rem0, rem1, zSig0>>63, doubleZSig0 | 1, &rem0, &rem1 );
-    }
-    zSig1 = estimateDiv128To64( rem1, 0, doubleZSig0 );
-    if ( ( zSig1 & 0x1FFF ) <= 5 ) {
-        if ( zSig1 == 0 ) zSig1 = 1;
-        mul64To128( doubleZSig0, zSig1, &term1, &term2 );
-        sub128( rem1, 0, term1, term2, &rem1, &rem2 );
-        mul64To128( zSig1, zSig1, &term2, &term3 );
-        sub192( rem1, rem2, 0, 0, term2, term3, &rem1, &rem2, &rem3 );
-        while ( (int64_t) rem1 < 0 ) {
-            --zSig1;
-            shortShift128Left( 0, zSig1, 1, &term2, &term3 );
-            term3 |= 1;
-            term2 |= doubleZSig0;
-            add192( rem1, rem2, rem3, 0, term2, term3, &rem1, &rem2, &rem3 );
-        }
-        zSig1 |= ( ( rem1 | rem2 | rem3 ) != 0 );
-    }
-    shift128ExtraRightJamming( zSig0, zSig1, 0, 14, &zSig0, &zSig1, &zSig2 );
-    return roundAndPackFloat128(0, zExp, zSig0, zSig1, zSig2, status);
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns 1 if the quadruple-precision floating-point value `a' is equal to
-| the corresponding value `b', and 0 otherwise.  The invalid exception is
-| raised if either operand is a NaN.  Otherwise, the comparison is performed
-| according to the IEC/IEEE Standard for Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-int float128_eq(float128 a, float128 b, float_status *status)
-{
-
-    if (    (    ( extractFloat128Exp( a ) == 0x7FFF )
-              && ( extractFloat128Frac0( a ) | extractFloat128Frac1( a ) ) )
-         || (    ( extractFloat128Exp( b ) == 0x7FFF )
-              && ( extractFloat128Frac0( b ) | extractFloat128Frac1( b ) ) )
-       ) {
-        float_raise(float_flag_invalid, status);
-        return 0;
-    }
-    return
-           ( a.low == b.low )
-        && (    ( a.high == b.high )
-             || (    ( a.low == 0 )
-                  && ( (uint64_t) ( ( a.high | b.high )<<1 ) == 0 ) )
-           );
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns 1 if the quadruple-precision floating-point value `a' is less than
-| or equal to the corresponding value `b', and 0 otherwise.  The invalid
-| exception is raised if either operand is a NaN.  The comparison is performed
-| according to the IEC/IEEE Standard for Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-int float128_le(float128 a, float128 b, float_status *status)
-{
-    flag aSign, bSign;
-
-    if (    (    ( extractFloat128Exp( a ) == 0x7FFF )
-              && ( extractFloat128Frac0( a ) | extractFloat128Frac1( a ) ) )
-         || (    ( extractFloat128Exp( b ) == 0x7FFF )
-              && ( extractFloat128Frac0( b ) | extractFloat128Frac1( b ) ) )
-       ) {
-        float_raise(float_flag_invalid, status);
-        return 0;
-    }
-    aSign = extractFloat128Sign( a );
-    bSign = extractFloat128Sign( b );
-    if ( aSign != bSign ) {
-        return
-               aSign
-            || (    ( ( (uint64_t) ( ( a.high | b.high )<<1 ) ) | a.low | b.low )
-                 == 0 );
-    }
-    return
-          aSign ? le128( b.high, b.low, a.high, a.low )
-        : le128( a.high, a.low, b.high, b.low );
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns 1 if the quadruple-precision floating-point value `a' is less than
-| the corresponding value `b', and 0 otherwise.  The invalid exception is
-| raised if either operand is a NaN.  The comparison is performed according
-| to the IEC/IEEE Standard for Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-int float128_lt(float128 a, float128 b, float_status *status)
-{
-    flag aSign, bSign;
-
-    if (    (    ( extractFloat128Exp( a ) == 0x7FFF )
-              && ( extractFloat128Frac0( a ) | extractFloat128Frac1( a ) ) )
-         || (    ( extractFloat128Exp( b ) == 0x7FFF )
-              && ( extractFloat128Frac0( b ) | extractFloat128Frac1( b ) ) )
-       ) {
-        float_raise(float_flag_invalid, status);
-        return 0;
-    }
-    aSign = extractFloat128Sign( a );
-    bSign = extractFloat128Sign( b );
-    if ( aSign != bSign ) {
-        return
-               aSign
-            && (    ( ( (uint64_t) ( ( a.high | b.high )<<1 ) ) | a.low | b.low )
-                 != 0 );
-    }
-    return
-          aSign ? lt128( b.high, b.low, a.high, a.low )
-        : lt128( a.high, a.low, b.high, b.low );
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns 1 if the quadruple-precision floating-point values `a' and `b' cannot
-| be compared, and 0 otherwise.  The invalid exception is raised if either
-| operand is a NaN. The comparison is performed according to the IEC/IEEE
-| Standard for Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-int float128_unordered(float128 a, float128 b, float_status *status)
-{
-    if (    (    ( extractFloat128Exp( a ) == 0x7FFF )
-              && ( extractFloat128Frac0( a ) | extractFloat128Frac1( a ) ) )
-         || (    ( extractFloat128Exp( b ) == 0x7FFF )
-              && ( extractFloat128Frac0( b ) | extractFloat128Frac1( b ) ) )
-       ) {
-        float_raise(float_flag_invalid, status);
-        return 1;
-    }
-    return 0;
-}
-
-/*----------------------------------------------------------------------------
-| Returns 1 if the quadruple-precision floating-point value `a' is equal to
-| the corresponding value `b', and 0 otherwise.  Quiet NaNs do not cause an
-| exception.  The comparison is performed according to the IEC/IEEE Standard
-| for Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-int float128_eq_quiet(float128 a, float128 b, float_status *status)
-{
-
-    if (    (    ( extractFloat128Exp( a ) == 0x7FFF )
-              && ( extractFloat128Frac0( a ) | extractFloat128Frac1( a ) ) )
-         || (    ( extractFloat128Exp( b ) == 0x7FFF )
-              && ( extractFloat128Frac0( b ) | extractFloat128Frac1( b ) ) )
-       ) {
-        if (    float128_is_signaling_nan( a )
-             || float128_is_signaling_nan( b ) ) {
-            float_raise(float_flag_invalid, status);
-        }
-        return 0;
-    }
-    return
-           ( a.low == b.low )
-        && (    ( a.high == b.high )
-             || (    ( a.low == 0 )
-                  && ( (uint64_t) ( ( a.high | b.high )<<1 ) == 0 ) )
-           );
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns 1 if the quadruple-precision floating-point value `a' is less than
-| or equal to the corresponding value `b', and 0 otherwise.  Quiet NaNs do not
-| cause an exception.  Otherwise, the comparison is performed according to the
-| IEC/IEEE Standard for Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-int float128_le_quiet(float128 a, float128 b, float_status *status)
-{
-    flag aSign, bSign;
-
-    if (    (    ( extractFloat128Exp( a ) == 0x7FFF )
-              && ( extractFloat128Frac0( a ) | extractFloat128Frac1( a ) ) )
-         || (    ( extractFloat128Exp( b ) == 0x7FFF )
-              && ( extractFloat128Frac0( b ) | extractFloat128Frac1( b ) ) )
-       ) {
-        if (    float128_is_signaling_nan( a )
-             || float128_is_signaling_nan( b ) ) {
-            float_raise(float_flag_invalid, status);
-        }
-        return 0;
-    }
-    aSign = extractFloat128Sign( a );
-    bSign = extractFloat128Sign( b );
-    if ( aSign != bSign ) {
-        return
-               aSign
-            || (    ( ( (uint64_t) ( ( a.high | b.high )<<1 ) ) | a.low | b.low )
-                 == 0 );
-    }
-    return
-          aSign ? le128( b.high, b.low, a.high, a.low )
-        : le128( a.high, a.low, b.high, b.low );
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns 1 if the quadruple-precision floating-point value `a' is less than
-| the corresponding value `b', and 0 otherwise.  Quiet NaNs do not cause an
-| exception.  Otherwise, the comparison is performed according to the IEC/IEEE
-| Standard for Binary Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-int float128_lt_quiet(float128 a, float128 b, float_status *status)
-{
-    flag aSign, bSign;
-
-    if (    (    ( extractFloat128Exp( a ) == 0x7FFF )
-              && ( extractFloat128Frac0( a ) | extractFloat128Frac1( a ) ) )
-         || (    ( extractFloat128Exp( b ) == 0x7FFF )
-              && ( extractFloat128Frac0( b ) | extractFloat128Frac1( b ) ) )
-       ) {
-        if (    float128_is_signaling_nan( a )
-             || float128_is_signaling_nan( b ) ) {
-            float_raise(float_flag_invalid, status);
-        }
-        return 0;
-    }
-    aSign = extractFloat128Sign( a );
-    bSign = extractFloat128Sign( b );
-    if ( aSign != bSign ) {
-        return
-               aSign
-            && (    ( ( (uint64_t) ( ( a.high | b.high )<<1 ) ) | a.low | b.low )
-                 != 0 );
-    }
-    return
-          aSign ? lt128( b.high, b.low, a.high, a.low )
-        : lt128( a.high, a.low, b.high, b.low );
-
-}
-
-/*----------------------------------------------------------------------------
-| Returns 1 if the quadruple-precision floating-point values `a' and `b' cannot
-| be compared, and 0 otherwise.  Quiet NaNs do not cause an exception.  The
-| comparison is performed according to the IEC/IEEE Standard for Binary
-| Floating-Point Arithmetic.
-*----------------------------------------------------------------------------*/
-
-int float128_unordered_quiet(float128 a, float128 b, float_status *status)
-{
-    if (    (    ( extractFloat128Exp( a ) == 0x7FFF )
-              && ( extractFloat128Frac0( a ) | extractFloat128Frac1( a ) ) )
-         || (    ( extractFloat128Exp( b ) == 0x7FFF )
-              && ( extractFloat128Frac0( b ) | extractFloat128Frac1( b ) ) )
-       ) {
-        if (    float128_is_signaling_nan( a )
-             || float128_is_signaling_nan( b ) ) {
-            float_raise(float_flag_invalid, status);
-        }
-        return 1;
-    }
-    return 0;
-}
-
-/* misc functions */
-float32 uint32_to_float32(uint32_t a, float_status *status)
-{
-    return int64_to_float32(a, status);
-}
-
-float64 uint32_to_float64(uint32_t a, float_status *status)
-{
-    return int64_to_float64(a, status);
-}
-
-uint32_t float32_to_uint32(float32 a, float_status *status)
-{
-    int64_t v;
-    uint32_t res;
-    int old_exc_flags = get_float_exception_flags(status);
-
-    v = float32_to_int64(a, status);
-    if (v < 0) {
-        res = 0;
-    } else if (v > 0xffffffff) {
-        res = 0xffffffff;
-    } else {
-        return v;
-    }
-    set_float_exception_flags(old_exc_flags, status);
-    float_raise(float_flag_invalid, status);
-    return res;
-}
-
-uint32_t float32_to_uint32_round_to_zero(float32 a, float_status *status)
-{
-    int64_t v;
-    uint32_t res;
-    int old_exc_flags = get_float_exception_flags(status);
-
-    v = float32_to_int64_round_to_zero(a, status);
-    if (v < 0) {
-        res = 0;
-    } else if (v > 0xffffffff) {
-        res = 0xffffffff;
-    } else {
-        return v;
-    }
-    set_float_exception_flags(old_exc_flags, status);
-    float_raise(float_flag_invalid, status);
-    return res;
-}
-
-int16_t float32_to_int16(float32 a, float_status *status)
-{
-    int32_t v;
-    int16_t res;
-    int old_exc_flags = get_float_exception_flags(status);
-
-    v = float32_to_int32(a, status);
-    if (v < -0x8000) {
-        res = -0x8000;
-    } else if (v > 0x7fff) {
-        res = 0x7fff;
-    } else {
-        return v;
-    }
-
-    set_float_exception_flags(old_exc_flags, status);
-    float_raise(float_flag_invalid, status);
-    return res;
-}
-
-uint16_t float32_to_uint16(float32 a, float_status *status)
-{
-    int32_t v;
-    uint16_t res;
-    int old_exc_flags = get_float_exception_flags(status);
-
-    v = float32_to_int32(a, status);
-    if (v < 0) {
-        res = 0;
-    } else if (v > 0xffff) {
-        res = 0xffff;
-    } else {
-        return v;
-    }
-
-    set_float_exception_flags(old_exc_flags, status);
-    float_raise(float_flag_invalid, status);
-    return res;
-}
-
-uint16_t float32_to_uint16_round_to_zero(float32 a, float_status *status)
-{
-    int64_t v;
-    uint16_t res;
-    int old_exc_flags = get_float_exception_flags(status);
-
-    v = float32_to_int64_round_to_zero(a, status);
-    if (v < 0) {
-        res = 0;
-    } else if (v > 0xffff) {
-        res = 0xffff;
-    } else {
-        return v;
-    }
-    set_float_exception_flags(old_exc_flags, status);
-    float_raise(float_flag_invalid, status);
-    return res;
-}
-
-uint32_t float64_to_uint32(float64 a, float_status *status)
-{
-    uint64_t v;
-    uint32_t res;
-    int old_exc_flags = get_float_exception_flags(status);
-
-    v = float64_to_uint64(a, status);
-    if (v > 0xffffffff) {
-        res = 0xffffffff;
-    } else {
-        return v;
-    }
-    set_float_exception_flags(old_exc_flags, status);
-    float_raise(float_flag_invalid, status);
-    return res;
-}
-
-uint32_t float64_to_uint32_round_to_zero(float64 a, float_status *status)
-{
-    uint64_t v;
-    uint32_t res;
-    int old_exc_flags = get_float_exception_flags(status);
-
-    v = float64_to_uint64_round_to_zero(a, status);
-    if (v > 0xffffffff) {
-        res = 0xffffffff;
-    } else {
-        return v;
-    }
-    set_float_exception_flags(old_exc_flags, status);
-    float_raise(float_flag_invalid, status);
-    return res;
-}
-
-int16_t float64_to_int16(float64 a, float_status *status)
-{
-    int64_t v;
-    int16_t res;
-    int old_exc_flags = get_float_exception_flags(status);
-
-    v = float64_to_int32(a, status);
-    if (v < -0x8000) {
-        res = -0x8000;
-    } else if (v > 0x7fff) {
-        res = 0x7fff;
-    } else {
-        return v;
-    }
-
-    set_float_exception_flags(old_exc_flags, status);
-    float_raise(float_flag_invalid, status);
-    return res;
-}
-
-uint16_t float64_to_uint16(float64 a, float_status *status)
-{
-    int64_t v;
-    uint16_t res;
-    int old_exc_flags = get_float_exception_flags(status);
-
-    v = float64_to_int32(a, status);
-    if (v < 0) {
-        res = 0;
-    } else if (v > 0xffff) {
-        res = 0xffff;
-    } else {
-        return v;
-    }
-
-    set_float_exception_flags(old_exc_flags, status);
-    float_raise(float_flag_invalid, status);
-    return res;
-}
-
-uint16_t float64_to_uint16_round_to_zero(float64 a, float_status *status)
-{
-    int64_t v;
-    uint16_t res;
-    int old_exc_flags = get_float_exception_flags(status);
-
-    v = float64_to_int64_round_to_zero(a, status);
-    if (v < 0) {
-        res = 0;
-    } else if (v > 0xffff) {
-        res = 0xffff;
-    } else {
-        return v;
-    }
-    set_float_exception_flags(old_exc_flags, status);
-    float_raise(float_flag_invalid, status);
-    return res;
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of converting the double-precision floating-point value
-| `a' to the 64-bit unsigned integer format.  The conversion is
-| performed according to the IEC/IEEE Standard for Binary Floating-Point
-| Arithmetic---which means in particular that the conversion is rounded
-| according to the current rounding mode.  If `a' is a NaN, the largest
-| positive integer is returned.  If the conversion overflows, the
-| largest unsigned integer is returned.  If 'a' is negative, the value is
-| rounded and zero is returned; negative values that do not round to zero
-| will raise the inexact exception.
-*----------------------------------------------------------------------------*/
-
-uint64_t float64_to_uint64(float64 a, float_status *status)
-{
-    flag aSign;
-    int aExp;
-    int shiftCount;
-    uint64_t aSig, aSigExtra;
-    a = float64_squash_input_denormal(a, status);
-
-    aSig = extractFloat64Frac(a);
-    aExp = extractFloat64Exp(a);
-    aSign = extractFloat64Sign(a);
-    if (aSign && (aExp > 1022)) {
-        float_raise(float_flag_invalid, status);
-        if (float64_is_any_nan(a)) {
-            return LIT64(0xFFFFFFFFFFFFFFFF);
-        } else {
-            return 0;
-        }
-    }
-    if (aExp) {
-        aSig |= LIT64(0x0010000000000000);
-    }
-    shiftCount = 0x433 - aExp;
-    if (shiftCount <= 0) {
-        if (0x43E < aExp) {
-            float_raise(float_flag_invalid, status);
-            return LIT64(0xFFFFFFFFFFFFFFFF);
-        }
-        aSigExtra = 0;
-        aSig <<= -shiftCount;
-    } else {
-        shift64ExtraRightJamming(aSig, 0, shiftCount, &aSig, &aSigExtra);
-    }
-    return roundAndPackUint64(aSign, aSig, aSigExtra, status);
-}
-
-uint64_t float64_to_uint64_round_to_zero(float64 a, float_status *status)
-{
-    signed char current_rounding_mode = status->float_rounding_mode;
-    set_float_rounding_mode(float_round_to_zero, status);
-    int64_t v = float64_to_uint64(a, status);
-    set_float_rounding_mode(current_rounding_mode, status);
-    return v;
-}
-
-#define COMPARE(s, nan_exp)                                                  \
-static inline int float ## s ## _compare_internal(float ## s a, float ## s b,\
-                                      int is_quiet, float_status *status)    \
-{                                                                            \
-    flag aSign, bSign;                                                       \
-    uint ## s ## _t av, bv;                                                  \
-    a = float ## s ## _squash_input_denormal(a, status);                     \
-    b = float ## s ## _squash_input_denormal(b, status);                     \
-                                                                             \
-    if (( ( extractFloat ## s ## Exp( a ) == nan_exp ) &&                    \
-         extractFloat ## s ## Frac( a ) ) ||                                 \
-        ( ( extractFloat ## s ## Exp( b ) == nan_exp ) &&                    \
-          extractFloat ## s ## Frac( b ) )) {                                \
-        if (!is_quiet ||                                                     \
-            float ## s ## _is_signaling_nan( a ) ||                          \
-            float ## s ## _is_signaling_nan( b ) ) {                         \
-            float_raise(float_flag_invalid, status);                         \
-        }                                                                    \
-        return float_relation_unordered;                                     \
-    }                                                                        \
-    aSign = extractFloat ## s ## Sign( a );                                  \
-    bSign = extractFloat ## s ## Sign( b );                                  \
-    av = float ## s ## _val(a);                                              \
-    bv = float ## s ## _val(b);                                              \
-    if ( aSign != bSign ) {                                                  \
-        if ( (uint ## s ## _t) ( ( av | bv )<<1 ) == 0 ) {                   \
-            /* zero case */                                                  \
-            return float_relation_equal;                                     \
-        } else {                                                             \
-            return 1 - (2 * aSign);                                          \
-        }                                                                    \
-    } else {                                                                 \
-        if (av == bv) {                                                      \
-            return float_relation_equal;                                     \
-        } else {                                                             \
-            return 1 - 2 * (aSign ^ ( av < bv ));                            \
-        }                                                                    \
-    }                                                                        \
-}                                                                            \
-                                                                             \
-int float ## s ## _compare(float ## s a, float ## s b, float_status *status) \
-{                                                                            \
-    return float ## s ## _compare_internal(a, b, 0, status);                 \
-}                                                                            \
-                                                                             \
-int float ## s ## _compare_quiet(float ## s a, float ## s b,                 \
-                                 float_status *status)                       \
-{                                                                            \
-    return float ## s ## _compare_internal(a, b, 1, status);                 \
-}
-
-COMPARE(32, 0xff)
-COMPARE(64, 0x7ff)
-
-static inline int floatx80_compare_internal(floatx80 a, floatx80 b,
-                                            int is_quiet, float_status *status)
-{
-    flag aSign, bSign;
-
-    if (( ( extractFloatx80Exp( a ) == 0x7fff ) &&
-          ( extractFloatx80Frac( a )<<1 ) ) ||
-        ( ( extractFloatx80Exp( b ) == 0x7fff ) &&
-          ( extractFloatx80Frac( b )<<1 ) )) {
-        if (!is_quiet ||
-            floatx80_is_signaling_nan( a ) ||
-            floatx80_is_signaling_nan( b ) ) {
-            float_raise(float_flag_invalid, status);
-        }
-        return float_relation_unordered;
-    }
-    aSign = extractFloatx80Sign( a );
-    bSign = extractFloatx80Sign( b );
-    if ( aSign != bSign ) {
-
-        if ( ( ( (uint16_t) ( ( a.high | b.high ) << 1 ) ) == 0) &&
-             ( ( a.low | b.low ) == 0 ) ) {
-            /* zero case */
-            return float_relation_equal;
-        } else {
-            return 1 - (2 * aSign);
-        }
-    } else {
-        if (a.low == b.low && a.high == b.high) {
-            return float_relation_equal;
-        } else {
-            return 1 - 2 * (aSign ^ ( lt128( a.high, a.low, b.high, b.low ) ));
-        }
-    }
-}
-
-int floatx80_compare(floatx80 a, floatx80 b, float_status *status)
-{
-    return floatx80_compare_internal(a, b, 0, status);
-}
-
-int floatx80_compare_quiet(floatx80 a, floatx80 b, float_status *status)
-{
-    return floatx80_compare_internal(a, b, 1, status);
-}
-
-static inline int float128_compare_internal(float128 a, float128 b,
-                                            int is_quiet, float_status *status)
-{
-    flag aSign, bSign;
-
-    if (( ( extractFloat128Exp( a ) == 0x7fff ) &&
-          ( extractFloat128Frac0( a ) | extractFloat128Frac1( a ) ) ) ||
-        ( ( extractFloat128Exp( b ) == 0x7fff ) &&
-          ( extractFloat128Frac0( b ) | extractFloat128Frac1( b ) ) )) {
-        if (!is_quiet ||
-            float128_is_signaling_nan( a ) ||
-            float128_is_signaling_nan( b ) ) {
-            float_raise(float_flag_invalid, status);
-        }
-        return float_relation_unordered;
-    }
-    aSign = extractFloat128Sign( a );
-    bSign = extractFloat128Sign( b );
-    if ( aSign != bSign ) {
-        if ( ( ( ( a.high | b.high )<<1 ) | a.low | b.low ) == 0 ) {
-            /* zero case */
-            return float_relation_equal;
-        } else {
-            return 1 - (2 * aSign);
-        }
-    } else {
-        if (a.low == b.low && a.high == b.high) {
-            return float_relation_equal;
-        } else {
-            return 1 - 2 * (aSign ^ ( lt128( a.high, a.low, b.high, b.low ) ));
-        }
-    }
-}
-
-int float128_compare(float128 a, float128 b, float_status *status)
-{
-    return float128_compare_internal(a, b, 0, status);
-}
-
-int float128_compare_quiet(float128 a, float128 b, float_status *status)
-{
-    return float128_compare_internal(a, b, 1, status);
-}
-
-/* min() and max() functions. These can't be implemented as
- * 'compare and pick one input' because that would mishandle
- * NaNs and +0 vs -0.
- *
- * minnum() and maxnum() functions. These are similar to the min()
- * and max() functions but if one of the arguments is a QNaN and
- * the other is numerical then the numerical argument is returned.
- * minnum() and maxnum correspond to the IEEE 754-2008 minNum()
- * and maxNum() operations. min() and max() are the typical min/max
- * semantics provided by many CPUs which predate that specification.
- *
- * minnummag() and maxnummag() functions correspond to minNumMag()
- * and minNumMag() from the IEEE-754 2008.
- */
-#define MINMAX(s)                                                       \
-static inline float ## s float ## s ## _minmax(float ## s a, float ## s b,     \
-                                               int ismin, int isieee,   \
-                                               int ismag,               \
-                                               float_status *status)    \
-{                                                                       \
-    flag aSign, bSign;                                                  \
-    uint ## s ## _t av, bv, aav, abv;                                   \
-    a = float ## s ## _squash_input_denormal(a, status);                \
-    b = float ## s ## _squash_input_denormal(b, status);                \
-    if (float ## s ## _is_any_nan(a) ||                                 \
-        float ## s ## _is_any_nan(b)) {                                 \
-        if (isieee) {                                                   \
-            if (float ## s ## _is_quiet_nan(a) &&                       \
-                !float ## s ##_is_any_nan(b)) {                         \
-                return b;                                               \
-            } else if (float ## s ## _is_quiet_nan(b) &&                \
-                       !float ## s ## _is_any_nan(a)) {                 \
-                return a;                                               \
-            }                                                           \
-        }                                                               \
-        return propagateFloat ## s ## NaN(a, b, status);                \
-    }                                                                   \
-    aSign = extractFloat ## s ## Sign(a);                               \
-    bSign = extractFloat ## s ## Sign(b);                               \
-    av = float ## s ## _val(a);                                         \
-    bv = float ## s ## _val(b);                                         \
-    if (ismag) {                                                        \
-        aav = float ## s ## _abs(av);                                   \
-        abv = float ## s ## _abs(bv);                                   \
-        if (aav != abv) {                                               \
-            if (ismin) {                                                \
-                return (aav < abv) ? a : b;                             \
-            } else {                                                    \
-                return (aav < abv) ? b : a;                             \
-            }                                                           \
-        }                                                               \
-    }                                                                   \
-    if (aSign != bSign) {                                               \
-        if (ismin) {                                                    \
-            return aSign ? a : b;                                       \
-        } else {                                                        \
-            return aSign ? b : a;                                       \
-        }                                                               \
-    } else {                                                            \
-        if (ismin) {                                                    \
-            return (aSign ^ (av < bv)) ? a : b;                         \
-        } else {                                                        \
-            return (aSign ^ (av < bv)) ? b : a;                         \
-        }                                                               \
-    }                                                                   \
-}                                                                       \
-                                                                        \
-float ## s float ## s ## _min(float ## s a, float ## s b,               \
-                              float_status *status)                     \
-{                                                                       \
-    return float ## s ## _minmax(a, b, 1, 0, 0, status);                \
-}                                                                       \
-                                                                        \
-float ## s float ## s ## _max(float ## s a, float ## s b,               \
-                              float_status *status)                     \
-{                                                                       \
-    return float ## s ## _minmax(a, b, 0, 0, 0, status);                \
-}                                                                       \
-                                                                        \
-float ## s float ## s ## _minnum(float ## s a, float ## s b,            \
-                                 float_status *status)                  \
-{                                                                       \
-    return float ## s ## _minmax(a, b, 1, 1, 0, status);                \
-}                                                                       \
-                                                                        \
-float ## s float ## s ## _maxnum(float ## s a, float ## s b,            \
-                                 float_status *status)                  \
-{                                                                       \
-    return float ## s ## _minmax(a, b, 0, 1, 0, status);                \
-}                                                                       \
-                                                                        \
-float ## s float ## s ## _minnummag(float ## s a, float ## s b,         \
-                                    float_status *status)               \
-{                                                                       \
-    return float ## s ## _minmax(a, b, 1, 1, 1, status);                \
-}                                                                       \
-                                                                        \
-float ## s float ## s ## _maxnummag(float ## s a, float ## s b,         \
-                                    float_status *status)               \
-{                                                                       \
-    return float ## s ## _minmax(a, b, 0, 1, 1, status);                \
-}
-
-MINMAX(32)
-MINMAX(64)
-
-
-/* Multiply A by 2 raised to the power N.  */
-float32 float32_scalbn(float32 a, int n, float_status *status)
-{
-    flag aSign;
-    int16_t aExp;
-    uint32_t aSig;
-
-    a = float32_squash_input_denormal(a, status);
-    aSig = extractFloat32Frac( a );
-    aExp = extractFloat32Exp( a );
-    aSign = extractFloat32Sign( a );
-
-    if ( aExp == 0xFF ) {
-        if ( aSig ) {
-            return propagateFloat32NaN(a, a, status);
-        }
-        return a;
-    }
-    if (aExp != 0) {
-        aSig |= 0x00800000;
-    } else if (aSig == 0) {
-        return a;
-    } else {
-        aExp++;
-    }
-
-    if (n > 0x200) {
-        n = 0x200;
-    } else if (n < -0x200) {
-        n = -0x200;
-    }
-
-    aExp += n - 1;
-    aSig <<= 7;
-    return normalizeRoundAndPackFloat32(aSign, aExp, aSig, status);
-}
-
-float64 float64_scalbn(float64 a, int n, float_status *status)
-{
-    flag aSign;
-    int16_t aExp;
-    uint64_t aSig;
-
-    a = float64_squash_input_denormal(a, status);
-    aSig = extractFloat64Frac( a );
-    aExp = extractFloat64Exp( a );
-    aSign = extractFloat64Sign( a );
-
-    if ( aExp == 0x7FF ) {
-        if ( aSig ) {
-            return propagateFloat64NaN(a, a, status);
-        }
-        return a;
-    }
-    if (aExp != 0) {
-        aSig |= LIT64( 0x0010000000000000 );
-    } else if (aSig == 0) {
-        return a;
-    } else {
-        aExp++;
-    }
-
-    if (n > 0x1000) {
-        n = 0x1000;
-    } else if (n < -0x1000) {
-        n = -0x1000;
-    }
-
-    aExp += n - 1;
-    aSig <<= 10;
-    return normalizeRoundAndPackFloat64(aSign, aExp, aSig, status);
-}
-
-floatx80 floatx80_scalbn(floatx80 a, int n, float_status *status)
-{
-    flag aSign;
-    int32_t aExp;
-    uint64_t aSig;
-
-    aSig = extractFloatx80Frac( a );
-    aExp = extractFloatx80Exp( a );
-    aSign = extractFloatx80Sign( a );
-
-    if ( aExp == 0x7FFF ) {
-        if ( aSig<<1 ) {
-            return propagateFloatx80NaN(a, a, status);
-        }
-        return a;
-    }
-
-    if (aExp == 0) {
-        if (aSig == 0) {
-            return a;
-        }
-        aExp++;
-    }
-
-    if (n > 0x10000) {
-        n = 0x10000;
-    } else if (n < -0x10000) {
-        n = -0x10000;
-    }
-
-    aExp += n;
-    return normalizeRoundAndPackFloatx80(status->floatx80_rounding_precision,
-                                         aSign, aExp, aSig, 0, status);
-}
-
-float128 float128_scalbn(float128 a, int n, float_status *status)
-{
-    flag aSign;
-    int32_t aExp;
-    uint64_t aSig0, aSig1;
-
-    aSig1 = extractFloat128Frac1( a );
-    aSig0 = extractFloat128Frac0( a );
-    aExp = extractFloat128Exp( a );
-    aSign = extractFloat128Sign( a );
-    if ( aExp == 0x7FFF ) {
-        if ( aSig0 | aSig1 ) {
-            return propagateFloat128NaN(a, a, status);
-        }
-        return a;
-    }
-    if (aExp != 0) {
-        aSig0 |= LIT64( 0x0001000000000000 );
-    } else if (aSig0 == 0 && aSig1 == 0) {
-        return a;
-    } else {
-        aExp++;
-    }
-
-    if (n > 0x10000) {
-        n = 0x10000;
-    } else if (n < -0x10000) {
-        n = -0x10000;
-    }
-
-    aExp += n - 1;
-    return normalizeRoundAndPackFloat128( aSign, aExp, aSig0, aSig1
-                                         , status);
-
-}