diff options
author | 2015-08-04 12:17:53 -0700 | |
---|---|---|
committer | 2015-08-04 15:44:42 -0700 | |
commit | 9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 (patch) | |
tree | 1c9cafbcd35f783a87880a10f85d1a060db1a563 /kernel/tools/testing/ktest/sample.conf | |
parent | 98260f3884f4a202f9ca5eabed40b1354c489b29 (diff) |
Add the rt linux 4.1.3-rt3 as base
Import the rt linux 4.1.3-rt3 as OPNFV kvm base.
It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:
commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Sat Jul 25 12:13:34 2015 +0200
Prepare v4.1.3-rt3
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.
Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>
Diffstat (limited to 'kernel/tools/testing/ktest/sample.conf')
-rw-r--r-- | kernel/tools/testing/ktest/sample.conf | 1288 |
1 files changed, 1288 insertions, 0 deletions
diff --git a/kernel/tools/testing/ktest/sample.conf b/kernel/tools/testing/ktest/sample.conf new file mode 100644 index 000000000..6c58cd8bb --- /dev/null +++ b/kernel/tools/testing/ktest/sample.conf @@ -0,0 +1,1288 @@ +# +# Config file for ktest.pl +# +# Note, all paths must be absolute +# + +# Options set in the beginning of the file are considered to be +# default options. These options can be overriden by test specific +# options, with the following exceptions: +# +# LOG_FILE +# CLEAR_LOG +# POWEROFF_ON_SUCCESS +# REBOOT_ON_SUCCESS +# +# Test specific options are set after the label: +# +# TEST_START +# +# The options after a TEST_START label are specific to that test. +# Each TEST_START label will set up a new test. If you want to +# perform a test more than once, you can add the ITERATE label +# to it followed by the number of times you want that test +# to iterate. If the ITERATE is left off, the test will only +# be performed once. +# +# TEST_START ITERATE 10 +# +# You can skip a test by adding SKIP (before or after the ITERATE +# and number) +# +# TEST_START SKIP +# +# TEST_START SKIP ITERATE 10 +# +# TEST_START ITERATE 10 SKIP +# +# The SKIP label causes the options and the test itself to be ignored. +# This is useful to set up several different tests in one config file, and +# only enabling the ones you want to use for a current test run. +# +# You can add default options anywhere in the file as well +# with the DEFAULTS tag. This allows you to have default options +# after the test options to keep the test options at the top +# of the file. You can even place the DEFAULTS tag between +# test cases (but not in the middle of a single test case) +# +# TEST_START +# MIN_CONFIG = /home/test/config-test1 +# +# DEFAULTS +# MIN_CONFIG = /home/test/config-default +# +# TEST_START ITERATE 10 +# +# The above will run the first test with MIN_CONFIG set to +# /home/test/config-test-1. Then 10 tests will be executed +# with MIN_CONFIG with /home/test/config-default. +# +# You can also disable defaults with the SKIP option +# +# DEFAULTS SKIP +# MIN_CONFIG = /home/test/config-use-sometimes +# +# DEFAULTS +# MIN_CONFIG = /home/test/config-most-times +# +# The above will ignore the first MIN_CONFIG. If you want to +# use the first MIN_CONFIG, remove the SKIP from the first +# DEFAULTS tag and add it to the second. Be careful, options +# may only be declared once per test or default. If you have +# the same option name under the same test or as default +# ktest will fail to execute, and no tests will run. +# +# DEFAULTS OVERRIDE +# +# Options defined in the DEFAULTS section can not be duplicated +# even if they are defined in two different DEFAULT sections. +# This is done to catch mistakes where an option is added but +# the previous option was forgotten about and not commented. +# +# The OVERRIDE keyword can be added to a section to allow this +# section to override other DEFAULT sections values that have +# been defined previously. It will only override options that +# have been defined before its use. Options defined later +# in a non override section will still error. The same option +# can not be defined in the same section even if that section +# is marked OVERRIDE. +# +# +# +# Both TEST_START and DEFAULTS sections can also have the IF keyword +# The value after the IF must evaluate into a 0 or non 0 positive +# integer, and can use the config variables (explained below). +# +# DEFAULTS IF ${IS_X86_32} +# +# The above will process the DEFAULTS section if the config +# variable IS_X86_32 evaluates to a non zero positive integer +# otherwise if it evaluates to zero, it will act the same +# as if the SKIP keyword was used. +# +# The ELSE keyword can be used directly after a section with +# a IF statement. +# +# TEST_START IF ${RUN_NET_TESTS} +# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-network +# +# ELSE +# +# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-normal +# +# +# The ELSE keyword can also contain an IF statement to allow multiple +# if then else sections. But all the sections must be either +# DEFAULT or TEST_START, they can not be a mixture. +# +# TEST_START IF ${RUN_NET_TESTS} +# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-network +# +# ELSE IF ${RUN_DISK_TESTS} +# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-tests +# +# ELSE IF ${RUN_CPU_TESTS} +# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-cpu +# +# ELSE +# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-network +# +# The if statement may also have comparisons that will and for +# == and !=, strings may be used for both sides. +# +# BOX_TYPE := x86_32 +# +# DEFAULTS IF ${BOX_TYPE} == x86_32 +# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-32 +# ELSE +# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-64 +# +# The DEFINED keyword can be used by the IF statements too. +# It returns true if the given config variable or option has been defined +# or false otherwise. +# +# +# DEFAULTS IF DEFINED USE_CC +# CC := ${USE_CC} +# ELSE +# CC := gcc +# +# +# As well as NOT DEFINED. +# +# DEFAULTS IF NOT DEFINED MAKE_CMD +# MAKE_CMD := make ARCH=x86 +# +# +# And/or ops (&&,||) may also be used to make complex conditionals. +# +# TEST_START IF (DEFINED ALL_TESTS || ${MYTEST} == boottest) && ${MACHINE} == gandalf +# +# Notice the use of parentheses. Without any parentheses the above would be +# processed the same as: +# +# TEST_START IF DEFINED ALL_TESTS || (${MYTEST} == boottest && ${MACHINE} == gandalf) +# +# +# +# INCLUDE file +# +# The INCLUDE keyword may be used in DEFAULT sections. This will +# read another config file and process that file as well. The included +# file can include other files, add new test cases or default +# statements. Config variables will be passed to these files and changes +# to config variables will be seen by top level config files. Including +# a file is processed just like the contents of the file was cut and pasted +# into the top level file, except, that include files that end with +# TEST_START sections will have that section ended at the end of +# the include file. That is, an included file is included followed +# by another DEFAULT keyword. +# +# Unlike other files referenced in this config, the file path does not need +# to be absolute. If the file does not start with '/', then the directory +# that the current config file was located in is used. If no config by the +# given name is found there, then the current directory is searched. +# +# INCLUDE myfile +# DEFAULT +# +# is the same as: +# +# INCLUDE myfile +# +# Note, if the include file does not contain a full path, the file is +# searched first by the location of the original include file, and then +# by the location that ktest.pl was executed in. +# + +#### Config variables #### +# +# This config file can also contain "config variables". +# These are assigned with ":=" instead of the ktest option +# assigment "=". +# +# The difference between ktest options and config variables +# is that config variables can be used multiple times, +# where each instance will override the previous instance. +# And that they only live at time of processing this config. +# +# The advantage to config variables are that they can be used +# by any option or any other config variables to define thing +# that you may use over and over again in the options. +# +# For example: +# +# USER := root +# TARGET := mybox +# TEST_CASE := ssh ${USER}@${TARGET} /path/to/my/test +# +# TEST_START +# MIN_CONFIG = config1 +# TEST = ${TEST_CASE} +# +# TEST_START +# MIN_CONFIG = config2 +# TEST = ${TEST_CASE} +# +# TEST_CASE := ssh ${USER}@${TARGET} /path/to/my/test2 +# +# TEST_START +# MIN_CONFIG = config1 +# TEST = ${TEST_CASE} +# +# TEST_START +# MIN_CONFIG = config2 +# TEST = ${TEST_CASE} +# +# TEST_DIR := /home/me/test +# +# BUILD_DIR = ${TEST_DIR}/linux.git +# OUTPUT_DIR = ${TEST_DIR}/test +# +# Note, the config variables are evaluated immediately, thus +# updating TARGET after TEST_CASE has been assigned does nothing +# to TEST_CASE. +# +# As shown in the example, to evaluate a config variable, you +# use the ${X} convention. Simple $X will not work. +# +# If the config variable does not exist, the ${X} will not +# be evaluated. Thus: +# +# MAKE_CMD = PATH=/mypath:${PATH} make +# +# If PATH is not a config variable, then the ${PATH} in +# the MAKE_CMD option will be evaluated by the shell when +# the MAKE_CMD option is passed into shell processing. + +#### Using options in other options #### +# +# Options that are defined in the config file may also be used +# by other options. All options are evaulated at time of +# use (except that config variables are evaluated at config +# processing time). +# +# If an ktest option is used within another option, instead of +# typing it again in that option you can simply use the option +# just like you can config variables. +# +# MACHINE = mybox +# +# TEST = ssh root@${MACHINE} /path/to/test +# +# The option will be used per test case. Thus: +# +# TEST_TYPE = test +# TEST = ssh root@{MACHINE} +# +# TEST_START +# MACHINE = box1 +# +# TEST_START +# MACHINE = box2 +# +# For both test cases, MACHINE will be evaluated at the time +# of the test case. The first test will run ssh root@box1 +# and the second will run ssh root@box2. + +#### Mandatory Default Options #### + +# These options must be in the default section, although most +# may be overridden by test options. + +# The machine hostname that you will test +#MACHINE = target + +# The box is expected to have ssh on normal bootup, provide the user +# (most likely root, since you need privileged operations) +#SSH_USER = root + +# The directory that contains the Linux source code +#BUILD_DIR = /home/test/linux.git + +# The directory that the objects will be built +# (can not be same as BUILD_DIR) +#OUTPUT_DIR = /home/test/build/target + +# The location of the compiled file to copy to the target +# (relative to OUTPUT_DIR) +#BUILD_TARGET = arch/x86/boot/bzImage + +# The place to put your image on the test machine +#TARGET_IMAGE = /boot/vmlinuz-test + +# A script or command to reboot the box +# +# Here is a digital loggers power switch example +#POWER_CYCLE = wget --no-proxy -O /dev/null -q --auth-no-challenge 'http://admin:admin@power/outlet?5=CCL' +# +# Here is an example to reboot a virtual box on the current host +# with the name "Guest". +#POWER_CYCLE = virsh destroy Guest; sleep 5; virsh start Guest + +# The script or command that reads the console +# +# If you use ttywatch server, something like the following would work. +#CONSOLE = nc -d localhost 3001 +# +# For a virtual machine with guest name "Guest". +#CONSOLE = virsh console Guest + +# Signal to send to kill console. +# ktest.pl will create a child process to monitor the console. +# When the console is finished, ktest will kill the child process +# with this signal. +# (default INT) +#CLOSE_CONSOLE_SIGNAL = HUP + +# Required version ending to differentiate the test +# from other linux builds on the system. +#LOCALVERSION = -test + +# For REBOOT_TYPE = grub2, you must specify where the grub.cfg +# file is. This is the file that is searched to find the menu +# option to boot to with GRUB_REBOOT +#GRUB_FILE = /boot/grub2/grub.cfg + +# The tool for REBOOT_TYPE = grub2 to set the next reboot kernel +# to boot into (one shot mode). +# (default grub2_reboot) +#GRUB_REBOOT = grub2_reboot + +# The grub title name for the test kernel to boot +# (Only mandatory if REBOOT_TYPE = grub or grub2) +# +# Note, ktest.pl will not update the grub menu.lst, you need to +# manually add an option for the test. ktest.pl will search +# the grub menu.lst for this option to find what kernel to +# reboot into. +# +# For example, if in the /boot/grub/menu.lst the test kernel title has: +# title Test Kernel +# kernel vmlinuz-test +# +# For grub2, a search of top level "menuentry"s are done. No +# submenu is searched. The menu is found by searching for the +# contents of GRUB_MENU in the line that starts with "menuentry". +# You may want to include the quotes around the option. For example: +# for: menuentry 'Test Kernel' +# do a: GRUB_MENU = 'Test Kernel' +# For customizing, add your entry in /etc/grub.d/40_custom. +# +#GRUB_MENU = Test Kernel + +# For REBOOT_TYPE = syslinux, the name of the syslinux executable +# (on the target) to use to set up the next reboot to boot the +# test kernel. +# (default extlinux) +#SYSLINUX = syslinux + +# For REBOOT_TYPE = syslinux, the path that is passed to to the +# syslinux command where syslinux is installed. +# (default /boot/extlinux) +#SYSLINUX_PATH = /boot/syslinux + +# For REBOOT_TYPE = syslinux, the syslinux label that references the +# test kernel in the syslinux config file. +# (default undefined) +#SYSLINUX_LABEL = "test-kernel" + +# A script to reboot the target into the test kernel +# This and SWITCH_TO_TEST are about the same, except +# SWITCH_TO_TEST is run even for REBOOT_TYPE = grub. +# This may be left undefined. +# (default undefined) +#REBOOT_SCRIPT = + +#### Optional Config Options (all have defaults) #### + +# Start a test setup. If you leave this off, all options +# will be default and the test will run once. +# This is a label and not really an option (it takes no value). +# You can append ITERATE and a number after it to iterate the +# test a number of times, or SKIP to ignore this test. +# +#TEST_START +#TEST_START ITERATE 5 +#TEST_START SKIP + +# Have the following options as default again. Used after tests +# have already been defined by TEST_START. Optionally, you can +# just define all default options before the first TEST_START +# and you do not need this option. +# +# This is a label and not really an option (it takes no value). +# You can append SKIP to this label and the options within this +# section will be ignored. +# +# DEFAULTS +# DEFAULTS SKIP + +# If you want to execute some command before the first test runs +# you can set this option. Note, it can be set as a default option +# or an option in the first test case. All other test cases will +# ignore it. If both the default and first test have this option +# set, then the first test will take precedence. +# +# default (undefined) +#PRE_KTEST = ${SSH} ~/set_up_test + +# If you want to execute some command after all the tests have +# completed, you can set this option. Note, it can be set as a +# default or any test case can override it. If multiple test cases +# set this option, then the last test case that set it will take +# precedence +# +# default (undefined) +#POST_KTEST = ${SSH} ~/dismantle_test + +# The default test type (default test) +# The test types may be: +# build - only build the kernel, do nothing else +# install - build and install, but do nothing else (does not reboot) +# boot - build, install, and boot the kernel +# test - build, boot and if TEST is set, run the test script +# (If TEST is not set, it defaults back to boot) +# bisect - Perform a bisect on the kernel (see BISECT_TYPE below) +# patchcheck - Do a test on a series of commits in git (see PATCHCHECK below) +#TEST_TYPE = test + +# Test to run if there is a successful boot and TEST_TYPE is test. +# Must exit with 0 on success and non zero on error +# default (undefined) +#TEST = ssh user@machine /root/run_test + +# The build type is any make config type or special command +# (default randconfig) +# nobuild - skip the clean and build step +# useconfig:/path/to/config - use the given config and run +# oldconfig on it. +# This option is ignored if TEST_TYPE is patchcheck or bisect +#BUILD_TYPE = randconfig + +# The make command (default make) +# If you are building a 32bit x86 on a 64 bit host +#MAKE_CMD = CC=i386-gcc AS=i386-as make ARCH=i386 + +# Any build options for the make of the kernel (not for other makes, like configs) +# (default "") +#BUILD_OPTIONS = -j20 + +# If you need to do some special handling before installing +# you can add a script with this option. +# The environment variable KERNEL_VERSION will be set to the +# kernel version that is used. +# +# default (undefined) +#PRE_INSTALL = ssh user@target rm -rf '/lib/modules/*-test*' + +# If you need an initrd, you can add a script or code here to install +# it. The environment variable KERNEL_VERSION will be set to the +# kernel version that is used. Remember to add the initrd line +# to your grub menu.lst file. +# +# Here's a couple of examples to use: +#POST_INSTALL = ssh user@target /sbin/mkinitrd --allow-missing -f /boot/initramfs-test.img $KERNEL_VERSION +# +# or on some systems: +#POST_INSTALL = ssh user@target /sbin/dracut -f /boot/initramfs-test.img $KERNEL_VERSION + +# If for some reason you just want to boot the kernel and you do not +# want the test to install anything new. For example, you may just want +# to boot test the same kernel over and over and do not want to go through +# the hassle of installing anything, you can set this option to 1 +# (default 0) +#NO_INSTALL = 1 + +# If there is a command that you want to run before the individual test +# case executes, then you can set this option +# +# default (undefined) +#PRE_TEST = ${SSH} reboot_to_special_kernel + +# If there is a command you want to run after the individual test case +# completes, then you can set this option. +# +# default (undefined) +#POST_TEST = cd ${BUILD_DIR}; git reset --hard + +# If there is a script that you require to run before the build is done +# you can specify it with PRE_BUILD. +# +# One example may be if you must add a temporary patch to the build to +# fix a unrelated bug to perform a patchcheck test. This will apply the +# patch before each build that is made. Use the POST_BUILD to do a git reset --hard +# to remove the patch. +# +# (default undef) +#PRE_BUILD = cd ${BUILD_DIR} && patch -p1 < /tmp/temp.patch + +# To specify if the test should fail if the PRE_BUILD fails, +# PRE_BUILD_DIE needs to be set to 1. Otherwise the PRE_BUILD +# result is ignored. +# (default 0) +# PRE_BUILD_DIE = 1 + +# If there is a script that should run after the build is done +# you can specify it with POST_BUILD. +# +# As the example in PRE_BUILD, POST_BUILD can be used to reset modifications +# made by the PRE_BUILD. +# +# (default undef) +#POST_BUILD = cd ${BUILD_DIR} && git reset --hard + +# To specify if the test should fail if the POST_BUILD fails, +# POST_BUILD_DIE needs to be set to 1. Otherwise the POST_BUILD +# result is ignored. +# (default 0) +#POST_BUILD_DIE = 1 + +# Way to reboot the box to the test kernel. +# Only valid options so far are "grub", "grub2", "syslinux" and "script" +# (default grub) +# If you specify grub, it will assume grub version 1 +# and will search in /boot/grub/menu.lst for the title $GRUB_MENU +# and select that target to reboot to the kernel. If this is not +# your setup, then specify "script" and have a command or script +# specified in REBOOT_SCRIPT to boot to the target. +# +# For REBOOT_TYPE = grub2, you must define both GRUB_MENU and +# GRUB_FILE. +# +# For REBOOT_TYPE = syslinux, you must define SYSLINUX_LABEL, and +# perhaps modify SYSLINUX (default extlinux) and SYSLINUX_PATH +# (default /boot/extlinux) +# +# The entry in /boot/grub/menu.lst must be entered in manually. +# The test will not modify that file. +#REBOOT_TYPE = grub + +# If you are using a machine that doesn't boot with grub, and +# perhaps gets its kernel from a remote server (tftp), then +# you can use this option to update the target image with the +# test image. +# +# You could also do the same with POST_INSTALL, but the difference +# between that option and this option is that POST_INSTALL runs +# after the install, where this one runs just before a reboot. +# (default undefined) +#SWITCH_TO_TEST = cp ${OUTPUT_DIR}/${BUILD_TARGET} ${TARGET_IMAGE} + +# If you are using a machine that doesn't boot with grub, and +# perhaps gets its kernel from a remote server (tftp), then +# you can use this option to update the target image with the +# the known good image to reboot safely back into. +# +# This option holds a command that will execute before needing +# to reboot to a good known image. +# (default undefined) +#SWITCH_TO_GOOD = ssh ${SSH_USER}/${MACHINE} cp good_image ${TARGET_IMAGE} + +# The min config that is needed to build for the machine +# A nice way to create this is with the following: +# +# $ ssh target +# $ lsmod > mymods +# $ scp mymods host:/tmp +# $ exit +# $ cd linux.git +# $ rm .config +# $ make LSMOD=mymods localyesconfig +# $ grep '^CONFIG' .config > /home/test/config-min +# +# If you want even less configs: +# +# log in directly to target (do not ssh) +# +# $ su +# # lsmod | cut -d' ' -f1 | xargs rmmod +# +# repeat the above several times +# +# # lsmod > mymods +# # reboot +# +# May need to reboot to get your network back to copy the mymods +# to the host, and then remove the previous .config and run the +# localyesconfig again. The CONFIG_MIN generated like this will +# not guarantee network activity to the box so the TEST_TYPE of +# test may fail. +# +# You might also want to set: +# CONFIG_CMDLINE="<your options here>" +# randconfig may set the above and override your real command +# line options. +# (default undefined) +#MIN_CONFIG = /home/test/config-min + +# Sometimes there's options that just break the boot and +# you do not care about. Here are a few: +# # CONFIG_STAGING is not set +# Staging drivers are horrible, and can break the build. +# # CONFIG_SCSI_DEBUG is not set +# SCSI_DEBUG may change your root partition +# # CONFIG_KGDB_SERIAL_CONSOLE is not set +# KGDB may cause oops waiting for a connection that's not there. +# This option points to the file containing config options that will be prepended +# to the MIN_CONFIG (or be the MIN_CONFIG if it is not set) +# +# Note, config options in MIN_CONFIG will override these options. +# +# (default undefined) +#ADD_CONFIG = /home/test/config-broken + +# The location on the host where to write temp files +# (default /tmp/ktest/${MACHINE}) +#TMP_DIR = /tmp/ktest/${MACHINE} + +# Optional log file to write the status (recommended) +# Note, this is a DEFAULT section only option. +# (default undefined) +#LOG_FILE = /home/test/logfiles/target.log + +# Remove old logfile if it exists before starting all tests. +# Note, this is a DEFAULT section only option. +# (default 0) +#CLEAR_LOG = 0 + +# Line to define a successful boot up in console output. +# This is what the line contains, not the entire line. If you need +# the entire line to match, then use regural expression syntax like: +# (do not add any quotes around it) +# +# SUCCESS_LINE = ^MyBox Login:$ +# +# (default "login:") +#SUCCESS_LINE = login: + +# To speed up between reboots, defining a line that the +# default kernel produces that represents that the default +# kernel has successfully booted and can be used to pass +# a new test kernel to it. Otherwise ktest.pl will wait till +# SLEEP_TIME to continue. +# (default undefined) +#REBOOT_SUCCESS_LINE = login: + +# In case the console constantly fills the screen, having +# a specified time to stop the test after success is recommended. +# (in seconds) +# (default 10) +#STOP_AFTER_SUCCESS = 10 + +# In case the console constantly fills the screen, having +# a specified time to stop the test after failure is recommended. +# (in seconds) +# (default 60) +#STOP_AFTER_FAILURE = 60 + +# In case the console constantly fills the screen, having +# a specified time to stop the test if it never succeeds nor fails +# is recommended. +# Note: this is ignored if a success or failure is detected. +# (in seconds) +# (default 600, -1 is to never stop) +#STOP_TEST_AFTER = 600 + +# Stop testing if a build fails. If set, the script will end if +# a failure is detected, otherwise it will save off the .config, +# dmesg and bootlog in a directory called +# MACHINE-TEST_TYPE_BUILD_TYPE-fail-yyyymmddhhmmss +# if the STORE_FAILURES directory is set. +# (default 1) +# Note, even if this is set to zero, there are some errors that still +# stop the tests. +#DIE_ON_FAILURE = 1 + +# Directory to store failure directories on failure. If this is not +# set, DIE_ON_FAILURE=0 will not save off the .config, dmesg and +# bootlog. This option is ignored if DIE_ON_FAILURE is not set. +# (default undefined) +#STORE_FAILURES = /home/test/failures + +# Directory to store success directories on success. If this is not +# set, the .config, dmesg and bootlog will not be saved if a +# test succeeds. +# (default undefined) +#STORE_SUCCESSES = /home/test/successes + +# Build without doing a make mrproper, or removing .config +# (default 0) +#BUILD_NOCLEAN = 0 + +# As the test reads the console, after it hits the SUCCESS_LINE +# the time it waits for the monitor to settle down between reads +# can usually be lowered. +# (in seconds) (default 1) +#BOOTED_TIMEOUT = 1 + +# The timeout in seconds when we consider the box hung after +# the console stop producing output. Be sure to leave enough +# time here to get pass a reboot. Some machines may not produce +# any console output for a long time during a reboot. You do +# not want the test to fail just because the system was in +# the process of rebooting to the test kernel. +# (default 120) +#TIMEOUT = 120 + +# In between tests, a reboot of the box may occur, and this +# is the time to wait for the console after it stops producing +# output. Some machines may not produce a large lag on reboot +# so this should accommodate it. +# The difference between this and TIMEOUT, is that TIMEOUT happens +# when rebooting to the test kernel. This sleep time happens +# after a test has completed and we are about to start running +# another test. If a reboot to the reliable kernel happens, +# we wait SLEEP_TIME for the console to stop producing output +# before starting the next test. +# +# You can speed up reboot times even more by setting REBOOT_SUCCESS_LINE. +# (default 60) +#SLEEP_TIME = 60 + +# The time in between bisects to sleep (in seconds) +# (default 60) +#BISECT_SLEEP_TIME = 60 + +# The max wait time (in seconds) for waiting for the console to finish. +# If for some reason, the console is outputting content without +# ever finishing, this will cause ktest to get stuck. This +# option is the max time ktest will wait for the monitor (console) +# to settle down before continuing. +# (default 1800) +#MAX_MONITOR_WAIT + +# The time in between patch checks to sleep (in seconds) +# (default 60) +#PATCHCHECK_SLEEP_TIME = 60 + +# Reboot the target box on error (default 0) +#REBOOT_ON_ERROR = 0 + +# Power off the target on error (ignored if REBOOT_ON_ERROR is set) +# Note, this is a DEFAULT section only option. +# (default 0) +#POWEROFF_ON_ERROR = 0 + +# Power off the target after all tests have completed successfully +# Note, this is a DEFAULT section only option. +# (default 0) +#POWEROFF_ON_SUCCESS = 0 + +# Reboot the target after all test completed successfully (default 1) +# (ignored if POWEROFF_ON_SUCCESS is set) +#REBOOT_ON_SUCCESS = 1 + +# In case there are isses with rebooting, you can specify this +# to always powercycle after this amount of time after calling +# reboot. +# Note, POWERCYCLE_AFTER_REBOOT = 0 does NOT disable it. It just +# makes it powercycle immediately after rebooting. Do not define +# it if you do not want it. +# (default undefined) +#POWERCYCLE_AFTER_REBOOT = 5 + +# In case there's isses with halting, you can specify this +# to always poweroff after this amount of time after calling +# halt. +# Note, POWEROFF_AFTER_HALT = 0 does NOT disable it. It just +# makes it poweroff immediately after halting. Do not define +# it if you do not want it. +# (default undefined) +#POWEROFF_AFTER_HALT = 20 + +# A script or command to power off the box (default undefined) +# Needed for POWEROFF_ON_ERROR and SUCCESS +# +# Example for digital loggers power switch: +#POWER_OFF = wget --no-proxy -O /dev/null -q --auth-no-challenge 'http://admin:admin@power/outlet?5=OFF' +# +# Example for a virtual guest call "Guest". +#POWER_OFF = virsh destroy Guest + +# To have the build fail on "new" warnings, create a file that +# contains a list of all known warnings (they must match exactly +# to the line with 'warning:', 'error:' or 'Error:'. If the option +# WARNINGS_FILE is set, then that file will be read, and if the +# build detects a warning, it will examine this file and if the +# warning does not exist in it, it will fail the build. +# +# Note, if this option is defined to a file that does not exist +# then any warning will fail the build. +# (see make_warnings_file below) +# +# (optional, default undefined) +#WARNINGS_FILE = ${OUTPUT_DIR}/warnings_file + +# The way to execute a command on the target +# (default ssh $SSH_USER@$MACHINE $SSH_COMMAND";) +# The variables SSH_USER, MACHINE and SSH_COMMAND are defined +#SSH_EXEC = ssh $SSH_USER@$MACHINE $SSH_COMMAND"; + +# The way to copy a file to the target (install and modules) +# (default scp $SRC_FILE $SSH_USER@$MACHINE:$DST_FILE) +# The variables SSH_USER, MACHINE are defined by the config +# SRC_FILE and DST_FILE are ktest internal variables and +# should only have '$' and not the '${}' notation. +# (default scp $SRC_FILE ${SSH_USER}@${MACHINE}:$DST_FILE) +#SCP_TO_TARGET = echo skip scp for $SRC_FILE $DST_FILE + +# If install needs to be different than modules, then this +# option will override the SCP_TO_TARGET for installation. +# (default ${SCP_TO_TARGET} ) +#SCP_TO_TARGET_INSTALL = scp $SRC_FILE tftp@tftpserver:$DST_FILE + +# The nice way to reboot the target +# (default ssh $SSH_USER@$MACHINE reboot) +# The variables SSH_USER and MACHINE are defined. +#REBOOT = ssh $SSH_USER@$MACHINE reboot + +# The way triple faults are detected is by testing the kernel +# banner. If the kernel banner for the kernel we are testing is +# found, and then later a kernel banner for another kernel version +# is found, it is considered that we encountered a triple fault, +# and there is no panic or callback, but simply a reboot. +# To disable this (because it did a false positive) set the following +# to 0. +# (default 1) +#DETECT_TRIPLE_FAULT = 0 + +# All options in the config file should be either used by ktest +# or could be used within a value of another option. If an option +# in the config file is not used, ktest will warn about it and ask +# if you want to continue. +# +# If you don't care if there are non-used options, enable this +# option. Be careful though, a non-used option is usually a sign +# of an option name being typed incorrectly. +# (default 0) +#IGNORE_UNUSED = 1 + +# When testing a kernel that happens to have WARNINGs, and call +# traces, ktest.pl will detect these and fail a boot or test run +# due to warnings. By setting this option, ktest will ignore +# call traces, and will not fail a test if the kernel produces +# an oops. Use this option with care. +# (default 0) +#IGNORE_ERRORS = 1 + +#### Per test run options #### +# The following options are only allowed in TEST_START sections. +# They are ignored in the DEFAULTS sections. +# +# All of these are optional and undefined by default, although +# some of these options are required for TEST_TYPE of patchcheck +# and bisect. +# +# +# CHECKOUT = branch +# +# If the BUILD_DIR is a git repository, then you can set this option +# to checkout the given branch before running the TEST. If you +# specify this for the first run, that branch will be used for +# all preceding tests until a new CHECKOUT is set. +# +# +# TEST_NAME = name +# +# If you want the test to have a name that is displayed in +# the test result banner at the end of the test, then use this +# option. This is useful to search for the RESULT keyword and +# not have to translate a test number to a test in the config. +# +# For TEST_TYPE = patchcheck +# +# This expects the BUILD_DIR to be a git repository, and +# will checkout the PATCHCHECK_START commit. +# +# The option BUILD_TYPE will be ignored. +# +# The MIN_CONFIG will be used for all builds of the patchcheck. The build type +# used for patchcheck is oldconfig. +# +# PATCHCHECK_START is required and is the first patch to +# test (the SHA1 of the commit). You may also specify anything +# that git checkout allows (branch name, tage, HEAD~3). +# +# PATCHCHECK_END is the last patch to check (default HEAD) +# +# PATCHCHECK_CHERRY if set to non zero, then git cherry will be +# performed against PATCHCHECK_START and PATCHCHECK_END. That is +# +# git cherry ${PATCHCHECK_START} ${PATCHCHECK_END} +# +# Then the changes found will be tested. +# +# Note, PATCHCHECK_CHERRY requires PATCHCHECK_END to be defined. +# (default 0) +# +# PATCHCHECK_TYPE is required and is the type of test to run: +# build, boot, test. +# +# Note, the build test will look for warnings, if a warning occurred +# in a file that a commit touches, the build will fail, unless +# IGNORE_WARNINGS is set for the given commit's sha1 +# +# IGNORE_WARNINGS can be used to disable the failure of patchcheck +# on a particuler commit (SHA1). You can add more than one commit +# by adding a list of SHA1s that are space delimited. +# +# If BUILD_NOCLEAN is set, then make mrproper will not be run on +# any of the builds, just like all other TEST_TYPE tests. But +# what makes patchcheck different from the other tests, is if +# BUILD_NOCLEAN is not set, only the first and last patch run +# make mrproper. This helps speed up the test. +# +# Example: +# TEST_START +# TEST_TYPE = patchcheck +# CHECKOUT = mybranch +# PATCHCHECK_TYPE = boot +# PATCHCHECK_START = 747e94ae3d1b4c9bf5380e569f614eb9040b79e7 +# PATCHCHECK_END = HEAD~2 +# IGNORE_WARNINGS = 42f9c6b69b54946ffc0515f57d01dc7f5c0e4712 0c17ca2c7187f431d8ffc79e81addc730f33d128 +# +# +# +# For TEST_TYPE = bisect +# +# You can specify a git bisect if the BUILD_DIR is a git repository. +# The MIN_CONFIG will be used for all builds of the bisect. The build type +# used for bisecting is oldconfig. +# +# The option BUILD_TYPE will be ignored. +# +# BISECT_TYPE is the type of test to perform: +# build - bad fails to build +# boot - bad builds but fails to boot +# test - bad boots but fails a test +# +# BISECT_GOOD is the commit (SHA1) to label as good (accepts all git good commit types) +# BISECT_BAD is the commit to label as bad (accepts all git bad commit types) +# +# The above three options are required for a bisect operation. +# +# BISECT_REPLAY = /path/to/replay/file (optional, default undefined) +# +# If an operation failed in the bisect that was not expected to +# fail. Then the test ends. The state of the BUILD_DIR will be +# left off at where the failure occurred. You can examine the +# reason for the failure, and perhaps even find a git commit +# that would work to continue with. You can run: +# +# git bisect log > /path/to/replay/file +# +# The adding: +# +# BISECT_REPLAY= /path/to/replay/file +# +# And running the test again. The test will perform the initial +# git bisect start, git bisect good, and git bisect bad, and +# then it will run git bisect replay on this file, before +# continuing with the bisect. +# +# BISECT_START = commit (optional, default undefined) +# +# As with BISECT_REPLAY, if the test failed on a commit that +# just happen to have a bad commit in the middle of the bisect, +# and you need to skip it. If BISECT_START is defined, it +# will checkout that commit after doing the initial git bisect start, +# git bisect good, git bisect bad, and running the git bisect replay +# if the BISECT_REPLAY is set. +# +# BISECT_SKIP = 1 (optional, default 0) +# +# If BISECT_TYPE is set to test but the build fails, ktest will +# simply fail the test and end their. You could use BISECT_REPLAY +# and BISECT_START to resume after you found a new starting point, +# or you could set BISECT_SKIP to 1. If BISECT_SKIP is set to 1, +# when something other than the BISECT_TYPE fails, ktest.pl will +# run "git bisect skip" and try again. +# +# BISECT_FILES = <path> (optional, default undefined) +# +# To just run the git bisect on a specific path, set BISECT_FILES. +# For example: +# +# BISECT_FILES = arch/x86 kernel/time +# +# Will run the bisect with "git bisect start -- arch/x86 kernel/time" +# +# BISECT_REVERSE = 1 (optional, default 0) +# +# In those strange instances where it was broken forever +# and you are trying to find where it started to work! +# Set BISECT_GOOD to the commit that was last known to fail +# Set BISECT_BAD to the commit that is known to start working. +# With BISECT_REVERSE = 1, The test will consider failures as +# good, and success as bad. +# +# BISECT_MANUAL = 1 (optional, default 0) +# +# In case there's a problem with automating the bisect for +# whatever reason. (Can't reboot, want to inspect each iteration) +# Doing a BISECT_MANUAL will have the test wait for you to +# tell it if the test passed or failed after each iteration. +# This is basicall the same as running git bisect yourself +# but ktest will rebuild and install the kernel for you. +# +# BISECT_CHECK = 1 (optional, default 0) +# +# Just to be sure the good is good and bad is bad, setting +# BISECT_CHECK to 1 will start the bisect by first checking +# out BISECT_BAD and makes sure it fails, then it will check +# out BISECT_GOOD and makes sure it succeeds before starting +# the bisect (it works for BISECT_REVERSE too). +# +# You can limit the test to just check BISECT_GOOD or +# BISECT_BAD with BISECT_CHECK = good or +# BISECT_CHECK = bad, respectively. +# +# BISECT_TRIES = 5 (optional, default 1) +# +# For those cases that it takes several tries to hit a bug, +# the BISECT_TRIES is useful. It is the number of times the +# test is ran before it says the kernel is good. The first failure +# will stop trying and mark the current SHA1 as bad. +# +# Note, as with all race bugs, there's no guarantee that if +# it succeeds, it is really a good bisect. But it helps in case +# the bug is some what reliable. +# +# You can set BISECT_TRIES to zero, and all tests will be considered +# good, unless you also set BISECT_MANUAL. +# +# BISECT_RET_GOOD = 0 (optional, default undefined) +# +# In case the specificed test returns something other than just +# 0 for good, and non-zero for bad, you can override 0 being +# good by defining BISECT_RET_GOOD. +# +# BISECT_RET_BAD = 1 (optional, default undefined) +# +# In case the specificed test returns something other than just +# 0 for good, and non-zero for bad, you can override non-zero being +# bad by defining BISECT_RET_BAD. +# +# BISECT_RET_ABORT = 255 (optional, default undefined) +# +# If you need to abort the bisect if the test discovers something +# that was wrong, you can define BISECT_RET_ABORT to be the error +# code returned by the test in order to abort the bisect. +# +# BISECT_RET_SKIP = 2 (optional, default undefined) +# +# If the test detects that the current commit is neither good +# nor bad, but something else happened (another bug detected) +# you can specify BISECT_RET_SKIP to an error code that the +# test returns when it should skip the current commit. +# +# BISECT_RET_DEFAULT = good (optional, default undefined) +# +# You can override the default of what to do when the above +# options are not hit. This may be one of, "good", "bad", +# "abort" or "skip" (without the quotes). +# +# Note, if you do not define any of the previous BISECT_RET_* +# and define BISECT_RET_DEFAULT, all bisects results will do +# what the BISECT_RET_DEFAULT has. +# +# +# Example: +# TEST_START +# TEST_TYPE = bisect +# BISECT_GOOD = v2.6.36 +# BISECT_BAD = b5153163ed580e00c67bdfecb02b2e3843817b3e +# BISECT_TYPE = build +# MIN_CONFIG = /home/test/config-bisect +# +# +# +# For TEST_TYPE = config_bisect +# +# In those cases that you have two different configs. One of them +# work, the other does not, and you do not know what config causes +# the problem. +# The TEST_TYPE config_bisect will bisect the bad config looking for +# what config causes the failure. +# +# The way it works is this: +# +# You can specify a good config with CONFIG_BISECT_GOOD, otherwise it +# will use the MIN_CONFIG, and if that's not specified, it will use +# the config that comes with "make defconfig". +# +# It runs both the good and bad configs through a make oldconfig to +# make sure that they are set up for the kernel that is checked out. +# +# It then reads the configs that are set, as well as the ones that are +# not set for both the good and bad configs, and then compares them. +# It will set half of the good configs within the bad config (note, +# "set" means to make the bad config match the good config, a config +# in the good config that is off, will be turned off in the bad +# config. That is considered a "set"). +# +# It tests this new config and if it works, it becomes the new good +# config, otherwise it becomes the new bad config. It continues this +# process until there's only one config left and it will report that +# config. +# +# The "bad config" can also be a config that is needed to boot but was +# disabled because it depended on something that wasn't set. +# +# During this process, it saves the current good and bad configs in +# ${TMP_DIR}/good_config and ${TMP_DIR}/bad_config respectively. +# If you stop the test, you can copy them to a new location to +# reuse them again. +# +# Although the MIN_CONFIG may be the config it starts with, the +# MIN_CONFIG is ignored. +# +# The option BUILD_TYPE will be ignored. +# +# CONFIG_BISECT_TYPE is the type of test to perform: +# build - bad fails to build +# boot - bad builds but fails to boot +# test - bad boots but fails a test +# +# CONFIG_BISECT is the config that failed to boot +# +# If BISECT_MANUAL is set, it will pause between iterations. +# This is useful to use just ktest.pl just for the config bisect. +# If you set it to build, it will run the bisect and you can +# control what happens in between iterations. It will ask you if +# the test succeeded or not and continue the config bisect. +# +# CONFIG_BISECT_GOOD (optional) +# If you have a good config to start with, then you +# can specify it with CONFIG_BISECT_GOOD. Otherwise +# the MIN_CONFIG is the base, if MIN_CONFIG is not set +# It will build a config with "make defconfig" +# +# CONFIG_BISECT_CHECK (optional) +# Set this to 1 if you want to confirm that the config ktest +# generates (the bad config with the min config) is still bad. +# It may be that the min config fixes what broke the bad config +# and the test will not return a result. +# Set it to "good" to test only the good config and set it +# to "bad" to only test the bad config. +# +# Example: +# TEST_START +# TEST_TYPE = config_bisect +# CONFIG_BISECT_TYPE = build +# CONFIG_BISECT = /home/test/config-bad +# MIN_CONFIG = /home/test/config-min +# BISECT_MANUAL = 1 +# +# +# +# For TEST_TYPE = make_min_config +# +# After doing a make localyesconfig, your kernel configuration may +# not be the most useful minimum configuration. Having a true minimum +# config that you can use against other configs is very useful if +# someone else has a config that breaks on your code. By only forcing +# those configurations that are truly required to boot your machine +# will give you less of a chance that one of your set configurations +# will make the bug go away. This will give you a better chance to +# be able to reproduce the reported bug matching the broken config. +# +# Note, this does take some time, and may require you to run the +# test over night, or perhaps over the weekend. But it also allows +# you to interrupt it, and gives you the current minimum config +# that was found till that time. +# +# Note, this test automatically assumes a BUILD_TYPE of oldconfig +# and its test type acts like boot. +# TODO: add a test version that makes the config do more than just +# boot, like having network access. +# +# To save time, the test does not just grab any option and test +# it. The Kconfig files are examined to determine the dependencies +# of the configs. If a config is chosen that depends on another +# config, that config will be checked first. By checking the +# parents first, we can eliminate whole groups of configs that +# may have been enabled. +# +# For example, if a USB device config is chosen and depends on CONFIG_USB, +# the CONFIG_USB will be tested before the device. If CONFIG_USB is +# found not to be needed, it, as well as all configs that depend on +# it, will be disabled and removed from the current min_config. +# +# OUTPUT_MIN_CONFIG is the path and filename of the file that will +# be created from the MIN_CONFIG. If you interrupt the test, set +# this file as your new min config, and use it to continue the test. +# This file does not need to exist on start of test. +# This file is not created until a config is found that can be removed. +# If this file exists, you will be prompted if you want to use it +# as the min_config (overriding MIN_CONFIG) if START_MIN_CONFIG +# is not defined. +# (required field) +# +# START_MIN_CONFIG is the config to use to start the test with. +# you can set this as the same OUTPUT_MIN_CONFIG, but if you do +# the OUTPUT_MIN_CONFIG file must exist. +# (default MIN_CONFIG) +# +# IGNORE_CONFIG is used to specify a config file that has configs that +# you already know must be set. Configs are written here that have +# been tested and proved to be required. It is best to define this +# file if you intend on interrupting the test and running it where +# it left off. New configs that it finds will be written to this file +# and will not be tested again in later runs. +# (optional) +# +# MIN_CONFIG_TYPE can be either 'boot' or 'test'. With 'boot' it will +# test if the created config can just boot the machine. If this is +# set to 'test', then the TEST option must be defined and the created +# config will not only boot the target, but also make sure that the +# config lets the test succeed. This is useful to make sure the final +# config that is generated allows network activity (ssh). +# (optional) +# +# USE_OUTPUT_MIN_CONFIG set this to 1 if you do not want to be prompted +# about using the OUTPUT_MIN_CONFIG as the MIN_CONFIG as the starting +# point. Set it to 0 if you want to always just use the given MIN_CONFIG. +# If it is not defined, it will prompt you to pick which config +# to start with (MIN_CONFIG or OUTPUT_MIN_CONFIG). +# +# Example: +# +# TEST_TYPE = make_min_config +# OUTPUT_MIN_CONFIG = /path/to/config-new-min +# START_MIN_CONFIG = /path/to/config-min +# IGNORE_CONFIG = /path/to/config-tested +# MIN_CONFIG_TYPE = test +# TEST = ssh ${USER}@${MACHINE} echo hi +# +# +# +# +# For TEST_TYPE = make_warnings_file +# +# If you want the build to fail when a new warning is discovered +# you set the WARNINGS_FILE to point to a file of known warnings. +# +# The test "make_warnings_file" will let you create a new warnings +# file before you run other tests, like patchcheck. +# +# What this test does is to run just a build, you still need to +# specify BUILD_TYPE to tell the test what type of config to use. +# A BUILD_TYPE of nobuild will fail this test. +# +# The test will do the build and scan for all warnings. Any warning +# it discovers will be saved in the WARNINGS_FILE (required) option. +# +# It is recommended (but not necessary) to make sure BUILD_NOCLEAN is +# off, so that a full build is done (make mrproper is performed). +# That way, all warnings will be captured. +# +# Example: +# +# TEST_TYPE = make_warnings_file +# WARNINGS_FILE = ${OUTPUT_DIR} +# BUILD_TYPE = useconfig:oldconfig +# CHECKOUT = v3.8 +# BUILD_NOCLEAN = 0 +# |