Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

3 files changed, 907 insertions, 0 deletions

diff --git a/kernel/tools/perf/config/Makefile b/kernel/tools/perf/config/Makefile
new file mode 100644
index 000000000..59a98c643
--- /dev/null
+++ b/kernel/tools/perf/config/Makefile
@@ -0,0 +1,710 @@
+
+ifeq ($(src-perf),)
+src-perf := $(srctree)/tools/perf
+endif
+
+ifeq ($(obj-perf),)
+obj-perf := $(OUTPUT)
+endif
+
+ifneq ($(obj-perf),)
+obj-perf := $(abspath $(obj-perf))/
+endif
+
+$(shell echo -n > .config-detected)
+detected     = $(shell echo "$(1)=y"       >> .config-detected)
+detected_var = $(shell echo "$(1)=$($(1))" >> .config-detected)
+
+CFLAGS := $(EXTRA_CFLAGS) $(EXTRA_WARNINGS)
+
+include $(src-perf)/config/Makefile.arch
+
+$(call detected_var,ARCH)
+
+NO_PERF_REGS := 1
+
+# Additional ARCH settings for x86
+ifeq ($(ARCH),x86)
+  $(call detected,CONFIG_X86)
+  ifeq (${IS_64_BIT}, 1)
+    CFLAGS += -DHAVE_ARCH_X86_64_SUPPORT
+    ARCH_INCLUDE = ../../arch/x86/lib/memcpy_64.S ../../arch/x86/lib/memset_64.S
+    LIBUNWIND_LIBS = -lunwind -lunwind-x86_64
+    $(call detected,CONFIG_X86_64)
+  else
+    LIBUNWIND_LIBS = -lunwind -lunwind-x86
+  endif
+  NO_PERF_REGS := 0
+endif
+
+ifeq ($(ARCH),arm)
+  NO_PERF_REGS := 0
+  LIBUNWIND_LIBS = -lunwind -lunwind-arm
+endif
+
+ifeq ($(ARCH),arm64)
+  NO_PERF_REGS := 0
+  LIBUNWIND_LIBS = -lunwind -lunwind-aarch64
+endif
+
+ifeq ($(NO_PERF_REGS),0)
+  $(call detected,CONFIG_PERF_REGS)
+endif
+
+# So far there's only x86 and arm libdw unwind support merged in perf.
+# Disable it on all other architectures in case libdw unwind
+# support is detected in system. Add supported architectures
+# to the check.
+ifneq ($(ARCH),$(filter $(ARCH),x86 arm))
+  NO_LIBDW_DWARF_UNWIND := 1
+endif
+
+ifeq ($(LIBUNWIND_LIBS),)
+  NO_LIBUNWIND := 1
+else
+  #
+  # For linking with debug library, run like:
+  #
+  #   make DEBUG=1 LIBUNWIND_DIR=/opt/libunwind/
+  #
+  ifdef LIBUNWIND_DIR
+    LIBUNWIND_CFLAGS  = -I$(LIBUNWIND_DIR)/include
+    LIBUNWIND_LDFLAGS = -L$(LIBUNWIND_DIR)/lib
+  endif
+  LIBUNWIND_LDFLAGS += $(LIBUNWIND_LIBS)
+
+  # Set per-feature check compilation flags
+  FEATURE_CHECK_CFLAGS-libunwind = $(LIBUNWIND_CFLAGS)
+  FEATURE_CHECK_LDFLAGS-libunwind = $(LIBUNWIND_LDFLAGS)
+  FEATURE_CHECK_CFLAGS-libunwind-debug-frame = $(LIBUNWIND_CFLAGS)
+  FEATURE_CHECK_LDFLAGS-libunwind-debug-frame = $(LIBUNWIND_LDFLAGS)
+endif
+
+ifeq ($(NO_PERF_REGS),0)
+  CFLAGS += -DHAVE_PERF_REGS_SUPPORT
+endif
+
+ifndef NO_LIBELF
+  # for linking with debug library, run like:
+  # make DEBUG=1 LIBDW_DIR=/opt/libdw/
+  ifdef LIBDW_DIR
+    LIBDW_CFLAGS  := -I$(LIBDW_DIR)/include
+    LIBDW_LDFLAGS := -L$(LIBDW_DIR)/lib
+  endif
+  FEATURE_CHECK_CFLAGS-libdw-dwarf-unwind := $(LIBDW_CFLAGS)
+  FEATURE_CHECK_LDFLAGS-libdw-dwarf-unwind := $(LIBDW_LDFLAGS) -ldw
+endif
+
+ifdef LIBBABELTRACE
+  # for linking with debug library, run like:
+  # make DEBUG=1 LIBBABELTRACE_DIR=/opt/libbabeltrace/
+  ifdef LIBBABELTRACE_DIR
+    LIBBABELTRACE_CFLAGS  := -I$(LIBBABELTRACE_DIR)/include
+    LIBBABELTRACE_LDFLAGS := -L$(LIBBABELTRACE_DIR)/lib
+  endif
+  FEATURE_CHECK_CFLAGS-libbabeltrace := $(LIBBABELTRACE_CFLAGS)
+  FEATURE_CHECK_LDFLAGS-libbabeltrace := $(LIBBABELTRACE_LDFLAGS) -lbabeltrace-ctf
+endif
+
+# include ARCH specific config
+-include $(src-perf)/arch/$(ARCH)/Makefile
+
+include $(src-perf)/config/utilities.mak
+
+ifeq ($(call get-executable,$(FLEX)),)
+  dummy := $(error Error: $(FLEX) is missing on this system, please install it)
+endif
+
+ifeq ($(call get-executable,$(BISON)),)
+  dummy := $(error Error: $(BISON) is missing on this system, please install it)
+endif
+
+# Treat warnings as errors unless directed not to
+ifneq ($(WERROR),0)
+  CFLAGS += -Werror
+endif
+
+ifndef DEBUG
+  DEBUG := 0
+endif
+
+ifeq ($(DEBUG),0)
+  CFLAGS += -O6
+endif
+
+ifdef PARSER_DEBUG
+  PARSER_DEBUG_BISON := -t
+  PARSER_DEBUG_FLEX  := -d
+  CFLAGS             += -DPARSER_DEBUG
+  $(call detected_var,PARSER_DEBUG_BISON)
+  $(call detected_var,PARSER_DEBUG_FLEX)
+endif
+
+ifndef NO_LIBPYTHON
+  # Try different combinations to accommodate systems that only have
+  # python[2][-config] in weird combinations but always preferring
+  # python2 and python2-config as per pep-0394. If we catch a
+  # python[-config] in version 3, the version check will kill it.
+  PYTHON2 := $(if $(call get-executable,python2),python2,python)
+  override PYTHON := $(call get-executable-or-default,PYTHON,$(PYTHON2))
+  PYTHON2_CONFIG := \
+    $(if $(call get-executable,$(PYTHON)-config),$(PYTHON)-config,python-config)
+  override PYTHON_CONFIG := \
+    $(call get-executable-or-default,PYTHON_CONFIG,$(PYTHON2_CONFIG))
+
+  PYTHON_CONFIG_SQ := $(call shell-sq,$(PYTHON_CONFIG))
+
+  PYTHON_EMBED_LDOPTS := $(shell $(PYTHON_CONFIG_SQ) --ldflags 2>/dev/null)
+  PYTHON_EMBED_CCOPTS := $(shell $(PYTHON_CONFIG_SQ) --cflags 2>/dev/null)
+
+  FEATURE_CHECK_CFLAGS-libpython := $(PYTHON_EMBED_CCOPTS)
+  FEATURE_CHECK_LDFLAGS-libpython := $(PYTHON_EMBED_LDOPTS)
+  FEATURE_CHECK_CFLAGS-libpython-version := $(PYTHON_EMBED_CCOPTS)
+  FEATURE_CHECK_LDFLAGS-libpython-version := $(PYTHON_EMBED_LDOPTS)
+endif
+
+CFLAGS += -fno-omit-frame-pointer
+CFLAGS += -ggdb3
+CFLAGS += -funwind-tables
+CFLAGS += -Wall
+CFLAGS += -Wextra
+CFLAGS += -std=gnu99
+
+# Enforce a non-executable stack, as we may regress (again) in the future by
+# adding assembler files missing the .GNU-stack linker note.
+LDFLAGS += -Wl,-z,noexecstack
+
+EXTLIBS = -lpthread -lrt -lm -ldl
+
+include $(srctree)/tools/build/Makefile.feature
+
+ifeq ($(feature-stackprotector-all), 1)
+  CFLAGS += -fstack-protector-all
+endif
+
+ifeq ($(DEBUG),0)
+  ifeq ($(feature-fortify-source), 1)
+    CFLAGS += -D_FORTIFY_SOURCE=2
+  endif
+endif
+
+CFLAGS += -I$(src-perf)/util/include
+CFLAGS += -I$(src-perf)/arch/$(ARCH)/include
+CFLAGS += -I$(srctree)/tools/include/
+CFLAGS += -I$(srctree)/arch/$(ARCH)/include/uapi
+CFLAGS += -I$(srctree)/arch/$(ARCH)/include
+CFLAGS += -I$(srctree)/include/uapi
+CFLAGS += -I$(srctree)/include
+
+# $(obj-perf)      for generated common-cmds.h
+# $(obj-perf)/util for generated bison/flex headers
+ifneq ($(OUTPUT),)
+CFLAGS += -I$(obj-perf)/util
+CFLAGS += -I$(obj-perf)
+endif
+
+CFLAGS += -I$(src-perf)/util
+CFLAGS += -I$(src-perf)
+CFLAGS += -I$(srctree)/tools/lib/
+
+CFLAGS += -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE
+
+ifeq ($(feature-sync-compare-and-swap), 1)
+  CFLAGS += -DHAVE_SYNC_COMPARE_AND_SWAP_SUPPORT
+endif
+
+ifeq ($(feature-pthread-attr-setaffinity-np), 1)
+  CFLAGS += -DHAVE_PTHREAD_ATTR_SETAFFINITY_NP
+endif
+
+ifndef NO_BIONIC
+  $(call feature_check,bionic)
+  ifeq ($(feature-bionic), 1)
+    BIONIC := 1
+    EXTLIBS := $(filter-out -lrt,$(EXTLIBS))
+    EXTLIBS := $(filter-out -lpthread,$(EXTLIBS))
+  endif
+endif
+
+ifdef NO_LIBELF
+  NO_DWARF := 1
+  NO_DEMANGLE := 1
+  NO_LIBUNWIND := 1
+  NO_LIBDW_DWARF_UNWIND := 1
+else
+  ifeq ($(feature-libelf), 0)
+    ifeq ($(feature-glibc), 1)
+      LIBC_SUPPORT := 1
+    endif
+    ifeq ($(BIONIC),1)
+      LIBC_SUPPORT := 1
+    endif
+    ifeq ($(LIBC_SUPPORT),1)
+      msg := $(warning No libelf found, disables 'probe' tool, please install elfutils-libelf-devel/libelf-dev);
+
+      NO_LIBELF := 1
+      NO_DWARF := 1
+      NO_DEMANGLE := 1
+      NO_LIBUNWIND := 1
+      NO_LIBDW_DWARF_UNWIND := 1
+    else
+      ifneq ($(filter s% -static%,$(LDFLAGS),),)
+        msg := $(error No static glibc found, please install glibc-static);
+      else
+        msg := $(error No gnu/libc-version.h found, please install glibc-dev[el]);
+      endif
+    endif
+  else
+    ifndef NO_LIBDW_DWARF_UNWIND
+      ifneq ($(feature-libdw-dwarf-unwind),1)
+        NO_LIBDW_DWARF_UNWIND := 1
+        msg := $(warning No libdw DWARF unwind found, Please install elfutils-devel/libdw-dev >= 0.158 and/or set LIBDW_DIR);
+      endif
+    endif
+    ifneq ($(feature-dwarf), 1)
+      msg := $(warning No libdw.h found or old libdw.h found or elfutils is older than 0.138, disables dwarf support. Please install new elfutils-devel/libdw-dev);
+      NO_DWARF := 1
+    endif # Dwarf support
+  endif # libelf support
+endif # NO_LIBELF
+
+ifndef NO_LIBELF
+  CFLAGS += -DHAVE_LIBELF_SUPPORT
+  EXTLIBS += -lelf
+  $(call detected,CONFIG_LIBELF)
+
+  ifeq ($(feature-libelf-mmap), 1)
+    CFLAGS += -DHAVE_LIBELF_MMAP_SUPPORT
+  endif
+
+  ifeq ($(feature-libelf-getphdrnum), 1)
+    CFLAGS += -DHAVE_ELF_GETPHDRNUM_SUPPORT
+  endif
+
+  # include ARCH specific config
+  -include $(src-perf)/arch/$(ARCH)/Makefile
+
+  ifndef NO_DWARF
+    ifeq ($(origin PERF_HAVE_DWARF_REGS), undefined)
+      msg := $(warning DWARF register mappings have not been defined for architecture $(ARCH), DWARF support disabled);
+      NO_DWARF := 1
+    else
+      CFLAGS += -DHAVE_DWARF_SUPPORT $(LIBDW_CFLAGS)
+      LDFLAGS += $(LIBDW_LDFLAGS)
+      EXTLIBS += -ldw
+      $(call detected,CONFIG_DWARF)
+    endif # PERF_HAVE_DWARF_REGS
+  endif # NO_DWARF
+endif # NO_LIBELF
+
+ifeq ($(ARCH),powerpc)
+  ifndef NO_DWARF
+    CFLAGS += -DHAVE_SKIP_CALLCHAIN_IDX
+  endif
+endif
+
+ifndef NO_LIBUNWIND
+  ifneq ($(feature-libunwind), 1)
+    msg := $(warning No libunwind found. Please install libunwind-dev[el] >= 1.1 and/or set LIBUNWIND_DIR);
+    NO_LIBUNWIND := 1
+  endif
+endif
+
+dwarf-post-unwind := 1
+dwarf-post-unwind-text := BUG
+
+# setup DWARF post unwinder
+ifdef NO_LIBUNWIND
+  ifdef NO_LIBDW_DWARF_UNWIND
+    msg := $(warning Disabling post unwind, no support found.);
+    dwarf-post-unwind := 0
+  else
+    dwarf-post-unwind-text := libdw
+    $(call detected,CONFIG_LIBDW_DWARF_UNWIND)
+  endif
+else
+  dwarf-post-unwind-text := libunwind
+  $(call detected,CONFIG_LIBUNWIND)
+  # Enable libunwind support by default.
+  ifndef NO_LIBDW_DWARF_UNWIND
+    NO_LIBDW_DWARF_UNWIND := 1
+  endif
+endif
+
+ifeq ($(dwarf-post-unwind),1)
+  CFLAGS += -DHAVE_DWARF_UNWIND_SUPPORT
+  $(call detected,CONFIG_DWARF_UNWIND)
+else
+  NO_DWARF_UNWIND := 1
+endif
+
+ifndef NO_LIBUNWIND
+  ifeq ($(ARCH),$(filter $(ARCH),arm arm64))
+    $(call feature_check,libunwind-debug-frame)
+    ifneq ($(feature-libunwind-debug-frame), 1)
+      msg := $(warning No debug_frame support found in libunwind);
+      CFLAGS += -DNO_LIBUNWIND_DEBUG_FRAME
+    endif
+  else
+    # non-ARM has no dwarf_find_debug_frame() function:
+    CFLAGS += -DNO_LIBUNWIND_DEBUG_FRAME
+  endif
+  CFLAGS  += -DHAVE_LIBUNWIND_SUPPORT
+  EXTLIBS += $(LIBUNWIND_LIBS)
+  CFLAGS  += $(LIBUNWIND_CFLAGS)
+  LDFLAGS += $(LIBUNWIND_LDFLAGS)
+endif
+
+ifndef NO_LIBAUDIT
+  ifneq ($(feature-libaudit), 1)
+    msg := $(warning No libaudit.h found, disables 'trace' tool, please install audit-libs-devel or libaudit-dev);
+    NO_LIBAUDIT := 1
+  else
+    CFLAGS += -DHAVE_LIBAUDIT_SUPPORT
+    EXTLIBS += -laudit
+    $(call detected,CONFIG_AUDIT)
+  endif
+endif
+
+ifdef NO_NEWT
+  NO_SLANG=1
+endif
+
+ifndef NO_SLANG
+  ifneq ($(feature-libslang), 1)
+    msg := $(warning slang not found, disables TUI support. Please install slang-devel or libslang-dev);
+    NO_SLANG := 1
+  else
+    # Fedora has /usr/include/slang/slang.h, but ubuntu /usr/include/slang.h
+    CFLAGS += -I/usr/include/slang
+    CFLAGS += -DHAVE_SLANG_SUPPORT
+    EXTLIBS += -lslang
+    $(call detected,CONFIG_SLANG)
+  endif
+endif
+
+ifndef NO_GTK2
+  FLAGS_GTK2=$(CFLAGS) $(LDFLAGS) $(EXTLIBS) $(shell $(PKG_CONFIG) --libs --cflags gtk+-2.0 2>/dev/null)
+  ifneq ($(feature-gtk2), 1)
+    msg := $(warning GTK2 not found, disables GTK2 support. Please install gtk2-devel or libgtk2.0-dev);
+    NO_GTK2 := 1
+  else
+    ifeq ($(feature-gtk2-infobar), 1)
+      GTK_CFLAGS := -DHAVE_GTK_INFO_BAR_SUPPORT
+    endif
+    CFLAGS += -DHAVE_GTK2_SUPPORT
+    GTK_CFLAGS += $(shell $(PKG_CONFIG) --cflags gtk+-2.0 2>/dev/null)
+    GTK_LIBS := $(shell $(PKG_CONFIG) --libs gtk+-2.0 2>/dev/null)
+    EXTLIBS += -ldl
+  endif
+endif
+
+grep-libs  = $(filter -l%,$(1))
+strip-libs = $(filter-out -l%,$(1))
+
+ifdef NO_LIBPERL
+  CFLAGS += -DNO_LIBPERL
+else
+  PERL_EMBED_LDOPTS = $(shell perl -MExtUtils::Embed -e ldopts 2>/dev/null)
+  PERL_EMBED_LDFLAGS = $(call strip-libs,$(PERL_EMBED_LDOPTS))
+  PERL_EMBED_LIBADD = $(call grep-libs,$(PERL_EMBED_LDOPTS))
+  PERL_EMBED_CCOPTS = `perl -MExtUtils::Embed -e ccopts 2>/dev/null`
+  FLAGS_PERL_EMBED=$(PERL_EMBED_CCOPTS) $(PERL_EMBED_LDOPTS)
+
+  ifneq ($(feature-libperl), 1)
+    CFLAGS += -DNO_LIBPERL
+    NO_LIBPERL := 1
+    msg := $(warning Missing perl devel files. Disabling perl scripting support, please install perl-ExtUtils-Embed/libperl-dev);
+  else
+    LDFLAGS += $(PERL_EMBED_LDFLAGS)
+    EXTLIBS += $(PERL_EMBED_LIBADD)
+    $(call detected,CONFIG_LIBPERL)
+  endif
+endif
+
+ifeq ($(feature-timerfd), 1)
+  CFLAGS += -DHAVE_TIMERFD_SUPPORT
+else
+  msg := $(warning No timerfd support. Disables 'perf kvm stat live');
+endif
+
+disable-python = $(eval $(disable-python_code))
+define disable-python_code
+  CFLAGS += -DNO_LIBPYTHON
+  $(warning $1)
+  NO_LIBPYTHON := 1
+endef
+
+ifdef NO_LIBPYTHON
+  $(call disable-python,Python support disabled by user)
+else
+
+  ifndef PYTHON
+    $(call disable-python,No python interpreter was found: disables Python support - please install python-devel/python-dev)
+  else
+    PYTHON_WORD := $(call shell-wordify,$(PYTHON))
+
+    ifndef PYTHON_CONFIG
+      $(call disable-python,No 'python-config' tool was found: disables Python support - please install python-devel/python-dev)
+    else
+
+      PYTHON_CONFIG_SQ := $(call shell-sq,$(PYTHON_CONFIG))
+
+      PYTHON_EMBED_LDOPTS := $(shell $(PYTHON_CONFIG_SQ) --ldflags 2>/dev/null)
+      PYTHON_EMBED_LDFLAGS := $(call strip-libs,$(PYTHON_EMBED_LDOPTS))
+      PYTHON_EMBED_LIBADD := $(call grep-libs,$(PYTHON_EMBED_LDOPTS))
+      PYTHON_EMBED_CCOPTS := $(shell $(PYTHON_CONFIG_SQ) --cflags 2>/dev/null)
+      FLAGS_PYTHON_EMBED := $(PYTHON_EMBED_CCOPTS) $(PYTHON_EMBED_LDOPTS)
+
+      ifneq ($(feature-libpython), 1)
+        $(call disable-python,No 'Python.h' (for Python 2.x support) was found: disables Python support - please install python-devel/python-dev)
+      else
+
+        ifneq ($(feature-libpython-version), 1)
+          $(warning Python 3 is not yet supported; please set)
+          $(warning PYTHON and/or PYTHON_CONFIG appropriately.)
+          $(warning If you also have Python 2 installed, then)
+          $(warning try something like:)
+          $(warning $(and ,))
+          $(warning $(and ,)  make PYTHON=python2)
+          $(warning $(and ,))
+          $(warning Otherwise, disable Python support entirely:)
+          $(warning $(and ,))
+          $(warning $(and ,)  make NO_LIBPYTHON=1)
+          $(warning $(and ,))
+          $(error   $(and ,))
+        else
+          LDFLAGS += $(PYTHON_EMBED_LDFLAGS)
+          EXTLIBS += $(PYTHON_EMBED_LIBADD)
+          LANG_BINDINGS += $(obj-perf)python/perf.so
+          $(call detected,CONFIG_LIBPYTHON)
+        endif
+      endif
+    endif
+  endif
+endif
+
+ifeq ($(feature-libbfd), 1)
+  EXTLIBS += -lbfd
+
+  # call all detections now so we get correct
+  # status in VF output
+  $(call feature_check,liberty)
+  $(call feature_check,liberty-z)
+  $(call feature_check,cplus-demangle)
+
+  ifeq ($(feature-liberty), 1)
+    EXTLIBS += -liberty
+  else
+    ifeq ($(feature-liberty-z), 1)
+      EXTLIBS += -liberty -lz
+    endif
+  endif
+endif
+
+ifdef NO_DEMANGLE
+  CFLAGS += -DNO_DEMANGLE
+else
+  ifdef HAVE_CPLUS_DEMANGLE_SUPPORT
+    EXTLIBS += -liberty
+    CFLAGS += -DHAVE_CPLUS_DEMANGLE_SUPPORT
+  else
+    ifneq ($(feature-libbfd), 1)
+      ifneq ($(feature-liberty), 1)
+        ifneq ($(feature-liberty-z), 1)
+          # we dont have neither HAVE_CPLUS_DEMANGLE_SUPPORT
+          # or any of 'bfd iberty z' trinity
+          ifeq ($(feature-cplus-demangle), 1)
+            EXTLIBS += -liberty
+            CFLAGS += -DHAVE_CPLUS_DEMANGLE_SUPPORT
+          else
+            msg := $(warning No bfd.h/libbfd found, please install binutils-dev[el]/zlib-static/libiberty-dev to gain symbol demangling)
+            CFLAGS += -DNO_DEMANGLE
+          endif
+        endif
+      endif
+    endif
+  endif
+endif
+
+ifneq ($(filter -lbfd,$(EXTLIBS)),)
+  CFLAGS += -DHAVE_LIBBFD_SUPPORT
+endif
+
+ifndef NO_ZLIB
+  ifeq ($(feature-zlib), 1)
+    CFLAGS += -DHAVE_ZLIB_SUPPORT
+    EXTLIBS += -lz
+    $(call detected,CONFIG_ZLIB)
+  else
+    NO_ZLIB := 1
+  endif
+endif
+
+ifndef NO_LZMA
+  ifeq ($(feature-lzma), 1)
+    CFLAGS += -DHAVE_LZMA_SUPPORT
+    EXTLIBS += -llzma
+    $(call detected,CONFIG_LZMA)
+  else
+    msg := $(warning No liblzma found, disables xz kernel module decompression, please install xz-devel/liblzma-dev);
+    NO_LZMA := 1
+  endif
+endif
+
+ifndef NO_BACKTRACE
+  ifeq ($(feature-backtrace), 1)
+    CFLAGS += -DHAVE_BACKTRACE_SUPPORT
+  endif
+endif
+
+ifndef NO_LIBNUMA
+  ifeq ($(feature-libnuma), 0)
+    msg := $(warning No numa.h found, disables 'perf bench numa mem' benchmark, please install numactl-devel/libnuma-devel/libnuma-dev);
+    NO_LIBNUMA := 1
+  else
+    CFLAGS += -DHAVE_LIBNUMA_SUPPORT
+    EXTLIBS += -lnuma
+    $(call detected,CONFIG_NUMA)
+  endif
+endif
+
+ifdef HAVE_KVM_STAT_SUPPORT
+    CFLAGS += -DHAVE_KVM_STAT_SUPPORT
+endif
+
+ifeq (${IS_64_BIT}, 1)
+  ifndef NO_PERF_READ_VDSO32
+    $(call feature_check,compile-32)
+    ifeq ($(feature-compile-32), 1)
+      CFLAGS += -DHAVE_PERF_READ_VDSO32
+    else
+      NO_PERF_READ_VDSO32 := 1
+    endif
+  endif
+  ifneq ($(ARCH), x86)
+    NO_PERF_READ_VDSOX32 := 1
+  endif
+  ifndef NO_PERF_READ_VDSOX32
+    $(call feature_check,compile-x32)
+    ifeq ($(feature-compile-x32), 1)
+      CFLAGS += -DHAVE_PERF_READ_VDSOX32
+    else
+      NO_PERF_READ_VDSOX32 := 1
+    endif
+  endif
+else
+  NO_PERF_READ_VDSO32 := 1
+  NO_PERF_READ_VDSOX32 := 1
+endif
+
+ifdef LIBBABELTRACE
+  $(call feature_check,libbabeltrace)
+  ifeq ($(feature-libbabeltrace), 1)
+    CFLAGS += -DHAVE_LIBBABELTRACE_SUPPORT $(LIBBABELTRACE_CFLAGS)
+    LDFLAGS += $(LIBBABELTRACE_LDFLAGS)
+    EXTLIBS += -lbabeltrace-ctf
+    $(call detected,CONFIG_LIBBABELTRACE)
+  else
+    msg := $(warning No libbabeltrace found, disables 'perf data' CTF format support, please install libbabeltrace-dev[el]/libbabeltrace-ctf-dev);
+  endif
+endif
+
+# Among the variables below, these:
+#   perfexecdir
+#   template_dir
+#   mandir
+#   infodir
+#   htmldir
+#   ETC_PERFCONFIG (but not sysconfdir)
+# can be specified as a relative path some/where/else;
+# this is interpreted as relative to $(prefix) and "perf" at
+# runtime figures out where they are based on the path to the executable.
+# This can help installing the suite in a relocatable way.
+
+# Make the path relative to DESTDIR, not to prefix
+ifndef DESTDIR
+prefix ?= $(HOME)
+endif
+bindir_relative = bin
+bindir = $(prefix)/$(bindir_relative)
+mandir = share/man
+infodir = share/info
+perfexecdir = libexec/perf-core
+sharedir = $(prefix)/share
+template_dir = share/perf-core/templates
+htmldir = share/doc/perf-doc
+ifeq ($(prefix),/usr)
+sysconfdir = /etc
+ETC_PERFCONFIG = $(sysconfdir)/perfconfig
+else
+sysconfdir = $(prefix)/etc
+ETC_PERFCONFIG = etc/perfconfig
+endif
+ifndef lib
+ifeq ($(ARCH)$(IS_64_BIT), x861)
+lib = lib64
+else
+lib = lib
+endif
+endif # lib
+libdir = $(prefix)/$(lib)
+
+# Shell quote (do not use $(call) to accommodate ancient setups);
+ETC_PERFCONFIG_SQ = $(subst ','\'',$(ETC_PERFCONFIG))
+DESTDIR_SQ = $(subst ','\'',$(DESTDIR))
+bindir_SQ = $(subst ','\'',$(bindir))
+mandir_SQ = $(subst ','\'',$(mandir))
+infodir_SQ = $(subst ','\'',$(infodir))
+perfexecdir_SQ = $(subst ','\'',$(perfexecdir))
+template_dir_SQ = $(subst ','\'',$(template_dir))
+htmldir_SQ = $(subst ','\'',$(htmldir))
+prefix_SQ = $(subst ','\'',$(prefix))
+sysconfdir_SQ = $(subst ','\'',$(sysconfdir))
+libdir_SQ = $(subst ','\'',$(libdir))
+
+ifneq ($(filter /%,$(firstword $(perfexecdir))),)
+perfexec_instdir = $(perfexecdir)
+else
+perfexec_instdir = $(prefix)/$(perfexecdir)
+endif
+perfexec_instdir_SQ = $(subst ','\'',$(perfexec_instdir))
+
+# If we install to $(HOME) we keep the traceevent default:
+# $(HOME)/.traceevent/plugins
+# Otherwise we install plugins into the global $(libdir).
+ifdef DESTDIR
+plugindir=$(libdir)/traceevent/plugins
+plugindir_SQ= $(subst ','\'',$(plugindir))
+endif
+
+print_var = $(eval $(print_var_code)) $(info $(MSG))
+define print_var_code
+    MSG = $(shell printf '...%30s: %s' $(1) $($(1)))
+endef
+
+ifeq ($(VF),1)
+  $(call print_var,prefix)
+  $(call print_var,bindir)
+  $(call print_var,libdir)
+  $(call print_var,sysconfdir)
+  $(call print_var,LIBUNWIND_DIR)
+  $(call print_var,LIBDW_DIR)
+  $(info )
+endif
+
+$(call detected_var,bindir_SQ)
+$(call detected_var,PYTHON_WORD)
+ifneq ($(OUTPUT),)
+$(call detected_var,OUTPUT)
+endif
+$(call detected_var,htmldir_SQ)
+$(call detected_var,infodir_SQ)
+$(call detected_var,mandir_SQ)
+$(call detected_var,ETC_PERFCONFIG_SQ)
+$(call detected_var,prefix_SQ)
+$(call detected_var,perfexecdir_SQ)
+$(call detected_var,LIBDIR)
+$(call detected_var,GTK_CFLAGS)
+$(call detected_var,PERL_EMBED_CCOPTS)
+$(call detected_var,PYTHON_EMBED_CCOPTS)
diff --git a/kernel/tools/perf/config/Makefile.arch b/kernel/tools/perf/config/Makefile.arch
new file mode 100644
index 000000000..e11fbd6fa
--- /dev/null
+++ b/kernel/tools/perf/config/Makefile.arch
@@ -0,0 +1,18 @@
+ifndef ARCH
+ARCH := $(shell uname -m 2>/dev/null || echo not)
+endif
+
+ARCH := $(shell echo $(ARCH) | sed -e s/i.86/x86/ -e s/x86_64/x86/ \
+                                  -e s/sun4u/sparc/ -e s/sparc64/sparc/ \
+                                  -e /arm64/!s/arm.*/arm/ -e s/sa110/arm/ \
+                                  -e s/s390x/s390/ -e s/parisc64/parisc/ \
+                                  -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
+                                  -e s/sh[234].*/sh/ -e s/aarch64.*/arm64/ \
+                                  -e s/tile.*/tile/ )
+
+LP64 := $(shell echo __LP64__ | ${CC} ${CFLAGS} -E -x c - | tail -n 1)
+ifeq ($(LP64), 1)
+  IS_64_BIT := 1
+else
+  IS_64_BIT := 0
+endif
diff --git a/kernel/tools/perf/config/utilities.mak b/kernel/tools/perf/config/utilities.mak
new file mode 100644
index 000000000..c16ce8330
--- /dev/null
+++ b/kernel/tools/perf/config/utilities.mak
@@ -0,0 +1,179 @@
+# This allows us to work with the newline character:
+define newline
+
+
+endef
+newline := $(newline)
+
+# nl-escape
+#
+# Usage: escape = $(call nl-escape[,escape])
+#
+# This is used as the common way to specify
+# what should replace a newline when escaping
+# newlines; the default is a bizarre string.
+#
+nl-escape = $(if $(1),$(1),m822df3020w6a44id34bt574ctac44eb9f4n)
+
+# escape-nl
+#
+# Usage: escaped-text = $(call escape-nl,text[,escape])
+#
+# GNU make's $(shell ...) function converts to a
+# single space each newline character in the output
+# produced during the expansion; this may not be
+# desirable.
+#
+# The only solution is to change each newline into
+# something that won't be converted, so that the
+# information can be recovered later with
+# $(call unescape-nl...)
+#
+escape-nl = $(subst $(newline),$(call nl-escape,$(2)),$(1))
+
+# unescape-nl
+#
+# Usage: text = $(call unescape-nl,escaped-text[,escape])
+#
+# See escape-nl.
+#
+unescape-nl = $(subst $(call nl-escape,$(2)),$(newline),$(1))
+
+# shell-escape-nl
+#
+# Usage: $(shell some-command | $(call shell-escape-nl[,escape]))
+#
+# Use this to escape newlines from within a shell call;
+# the default escape is a bizarre string.
+#
+# NOTE: The escape is used directly as a string constant
+#       in an `awk' program that is delimited by shell
+#       single-quotes, so be wary of the characters
+#       that are chosen.
+#
+define shell-escape-nl
+awk 'NR==1 {t=$$0} NR>1 {t=t "$(nl-escape)" $$0} END {printf t}'
+endef
+
+# shell-unescape-nl
+#
+# Usage: $(shell some-command | $(call shell-unescape-nl[,escape]))
+#
+# Use this to unescape newlines from within a shell call;
+# the default escape is a bizarre string.
+#
+# NOTE: The escape is used directly as an extended regular
+#       expression constant in an `awk' program that is
+#       delimited by shell single-quotes, so be wary
+#       of the characters that are chosen.
+#
+# (The bash shell has a bug where `{gsub(...),...}' is
+#  misinterpreted as a brace expansion; this can be
+#  overcome by putting a space between `{' and `gsub').
+#
+define shell-unescape-nl
+awk 'NR==1 {t=$$0} NR>1 {t=t "\n" $$0} END { gsub(/$(nl-escape)/,"\n",t); printf t }'
+endef
+
+# escape-for-shell-sq
+#
+# Usage: embeddable-text = $(call escape-for-shell-sq,text)
+#
+# This function produces text that is suitable for
+# embedding in a shell string that is delimited by
+# single-quotes.
+#
+escape-for-shell-sq =  $(subst ','\'',$(1))
+
+# shell-sq
+#
+# Usage: single-quoted-and-escaped-text = $(call shell-sq,text)
+#
+shell-sq = '$(escape-for-shell-sq)'
+
+# shell-wordify
+#
+# Usage: wordified-text = $(call shell-wordify,text)
+#
+# For instance:
+#
+#  |define text
+#  |hello
+#  |world
+#  |endef
+#  |
+#  |target:
+#  |	echo $(call shell-wordify,$(text))
+#
+# At least GNU make gets confused by expanding a newline
+# within the context of a command line of a makefile rule
+# (this is in constrast to a `$(shell ...)' function call,
+# which can handle it just fine).
+#
+# This function avoids the problem by producing a string
+# that works as a shell word, regardless of whether or
+# not it contains a newline.
+#
+# If the text to be wordified contains a newline, then
+# an intrictate shell command substitution is constructed
+# to render the text as a single line; when the shell
+# processes the resulting escaped text, it transforms
+# it into the original unescaped text.
+#
+# If the text does not contain a newline, then this function
+# produces the same results as the `$(shell-sq)' function.
+#
+shell-wordify = $(if $(findstring $(newline),$(1)),$(_sw-esc-nl),$(shell-sq))
+define _sw-esc-nl
+"$$(echo $(call escape-nl,$(shell-sq),$(2)) | $(call shell-unescape-nl,$(2)))"
+endef
+
+# is-absolute
+#
+# Usage: bool-value = $(call is-absolute,path)
+#
+is-absolute = $(shell echo $(shell-sq) | grep -q ^/ && echo y)
+
+# lookup
+#
+# Usage: absolute-executable-path-or-empty = $(call lookup,path)
+#
+# (It's necessary to use `sh -c' because GNU make messes up by
+#  trying too hard and getting things wrong).
+#
+lookup = $(call unescape-nl,$(shell sh -c $(_l-sh)))
+_l-sh = $(call shell-sq,command -v $(shell-sq) | $(call shell-escape-nl,))
+
+# is-executable
+#
+# Usage: bool-value = $(call is-executable,path)
+#
+# (It's necessary to use `sh -c' because GNU make messes up by
+#  trying too hard and getting things wrong).
+#
+is-executable = $(call _is-executable-helper,$(shell-sq))
+_is-executable-helper = $(shell sh -c $(_is-executable-sh))
+_is-executable-sh = $(call shell-sq,test -f $(1) -a -x $(1) && echo y)
+
+# get-executable
+#
+# Usage: absolute-executable-path-or-empty = $(call get-executable,path)
+#
+# The goal is to get an absolute path for an executable;
+# the `command -v' is defined by POSIX, but it's not
+# necessarily very portable, so it's only used if
+# relative path resolution is requested, as determined
+# by the presence of a leading `/'.
+#
+get-executable = $(if $(1),$(if $(is-absolute),$(_ge-abspath),$(lookup)))
+_ge-abspath = $(if $(is-executable),$(1))
+
+# get-supplied-or-default-executable
+#
+# Usage: absolute-executable-path-or-empty = $(call get-executable-or-default,variable,default)
+#
+define get-executable-or-default
+$(if $($(1)),$(call _ge_attempt,$($(1)),$(1)),$(call _ge_attempt,$(2)))
+endef
+_ge_attempt = $(if $(get-executable),$(get-executable),$(call _gea_err,$(2)))
+_gea_err  = $(if $(1),$(error Please set '$(1)' appropriately))