These changes are the raw update to linux-4.4.6-rt14. Kernel sources

are taken from kernel.org, and rt patch from the rt wiki download page.

During the rebasing, the following patch collided:

Force tick interrupt and get rid of softirq magic(I70131fb85).

Collisions have been removed because its logic was found on the
source already.

Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>

17 files changed, 1309 insertions, 75 deletions

diff --git a/kernel/tools/perf/Documentation/callchain-overhead-calculation.txt b/kernel/tools/perf/Documentation/callchain-overhead-calculation.txt
new file mode 100644
index 000000000..1a7579271
--- /dev/null
+++ b/kernel/tools/perf/Documentation/callchain-overhead-calculation.txt
@@ -0,0 +1,108 @@
+Overhead calculation
+--------------------
+The overhead can be shown in two columns as 'Children' and 'Self' when
+perf collects callchains.  The 'self' overhead is simply calculated by
+adding all period values of the entry - usually a function (symbol).
+This is the value that perf shows traditionally and sum of all the
+'self' overhead values should be 100%.
+
+The 'children' overhead is calculated by adding all period values of
+the child functions so that it can show the total overhead of the
+higher level functions even if they don't directly execute much.
+'Children' here means functions that are called from another (parent)
+function.
+
+It might be confusing that the sum of all the 'children' overhead
+values exceeds 100% since each of them is already an accumulation of
+'self' overhead of its child functions.  But with this enabled, users
+can find which function has the most overhead even if samples are
+spread over the children.
+
+Consider the following example; there are three functions like below.
+
+-----------------------
+void foo(void) {
+    /* do something */
+}
+
+void bar(void) {
+    /* do something */
+    foo();
+}
+
+int main(void) {
+    bar()
+    return 0;
+}
+-----------------------
+
+In this case 'foo' is a child of 'bar', and 'bar' is an immediate
+child of 'main' so 'foo' also is a child of 'main'.  In other words,
+'main' is a parent of 'foo' and 'bar', and 'bar' is a parent of 'foo'.
+
+Suppose all samples are recorded in 'foo' and 'bar' only.  When it's
+recorded with callchains the output will show something like below
+in the usual (self-overhead-only) output of perf report:
+
+----------------------------------
+Overhead  Symbol
+........  .....................
+  60.00%  foo
+          |
+          --- foo
+              bar
+              main
+              __libc_start_main
+
+  40.00%  bar
+          |
+          --- bar
+              main
+              __libc_start_main
+----------------------------------
+
+When the --children option is enabled, the 'self' overhead values of
+child functions (i.e. 'foo' and 'bar') are added to the parents to
+calculate the 'children' overhead.  In this case the report could be
+displayed as:
+
+-------------------------------------------
+Children      Self  Symbol
+........  ........  ....................
+ 100.00%     0.00%  __libc_start_main
+          |
+          --- __libc_start_main
+
+ 100.00%     0.00%  main
+          |
+          --- main
+              __libc_start_main
+
+ 100.00%    40.00%  bar
+          |
+          --- bar
+              main
+              __libc_start_main
+
+  60.00%    60.00%  foo
+          |
+          --- foo
+              bar
+              main
+              __libc_start_main
+-------------------------------------------
+
+In the above output, the 'self' overhead of 'foo' (60%) was add to the
+'children' overhead of 'bar', 'main' and '\_\_libc_start_main'.
+Likewise, the 'self' overhead of 'bar' (40%) was added to the
+'children' overhead of 'main' and '\_\_libc_start_main'.
+
+So '\_\_libc_start_main' and 'main' are shown first since they have
+same (100%) 'children' overhead (even though they have zero 'self'
+overhead) and they are the parents of 'foo' and 'bar'.
+
+Since v3.16 the 'children' overhead is shown by default and the output
+is sorted by its values. The 'children' overhead is disabled by
+specifying --no-children option on the command line or by adding
+'report.children = false' or 'top.children = false' in the perf config
+file.
diff --git a/kernel/tools/perf/Documentation/intel-bts.txt b/kernel/tools/perf/Documentation/intel-bts.txt
new file mode 100644
index 000000000..8bdc93bd7
--- /dev/null
+++ b/kernel/tools/perf/Documentation/intel-bts.txt
@@ -0,0 +1,86 @@
+Intel Branch Trace Store
+========================
+
+Overview
+========
+
+Intel BTS could be regarded as a predecessor to Intel PT and has some
+similarities because it can also identify every branch a program takes.  A
+notable difference is that Intel BTS has no timing information and as a
+consequence the present implementation is limited to per-thread recording.
+
+While decoding Intel BTS does not require walking the object code, the object
+code is still needed to pair up calls and returns correctly, consequently much
+of the Intel PT documentation applies also to Intel BTS.  Refer to the Intel PT
+documentation and consider that the PMU 'intel_bts' can usually be used in
+place of 'intel_pt' in the examples provided, with the proviso that per-thread
+recording must also be stipulated i.e. the --per-thread option for
+'perf record'.
+
+
+perf record
+===========
+
+new event
+---------
+
+The Intel BTS kernel driver creates a new PMU for Intel BTS.  The perf record
+option is:
+
+	-e intel_bts//
+
+Currently Intel BTS is limited to per-thread tracing so the --per-thread option
+is also needed.
+
+
+snapshot option
+---------------
+
+The snapshot option is the same as Intel PT (refer Intel PT documentation).
+
+
+auxtrace mmap size option
+-----------------------
+
+The mmap size option is the same as Intel PT (refer Intel PT documentation).
+
+
+perf script
+===========
+
+By default, perf script will decode trace data found in the perf.data file.
+This can be further controlled by option --itrace.  The --itrace option is
+the same as Intel PT (refer Intel PT documentation) except that neither
+"instructions" events nor "transactions" events (and consequently call
+chains) are supported.
+
+To disable trace decoding entirely, use the option --no-itrace.
+
+
+dump option
+-----------
+
+perf script has an option (-D) to "dump" the events i.e. display the binary
+data.
+
+When -D is used, Intel BTS packets are displayed.
+
+To disable the display of Intel BTS packets, combine the -D option with
+--no-itrace.
+
+
+perf report
+===========
+
+By default, perf report will decode trace data found in the perf.data file.
+This can be further controlled by new option --itrace exactly the same as
+perf script.
+
+
+perf inject
+===========
+
+perf inject also accepts the --itrace option in which case tracing data is
+removed and replaced with the synthesized events. e.g.
+
+	perf inject --itrace -i perf.data -o perf.data.new
diff --git a/kernel/tools/perf/Documentation/intel-pt.txt b/kernel/tools/perf/Documentation/intel-pt.txt
new file mode 100644
index 000000000..be764f9ec
--- /dev/null
+++ b/kernel/tools/perf/Documentation/intel-pt.txt
@@ -0,0 +1,795 @@
+Intel Processor Trace
+=====================
+
+Overview
+========
+
+Intel Processor Trace (Intel PT) is an extension of Intel Architecture that
+collects information about software execution such as control flow, execution
+modes and timings and formats it into highly compressed binary packets.
+Technical details are documented in the Intel 64 and IA-32 Architectures
+Software Developer Manuals, Chapter 36 Intel Processor Trace.
+
+Intel PT is first supported in Intel Core M and 5th generation Intel Core
+processors that are based on the Intel micro-architecture code name Broadwell.
+
+Trace data is collected by 'perf record' and stored within the perf.data file.
+See below for options to 'perf record'.
+
+Trace data must be 'decoded' which involves walking the object code and matching
+the trace data packets. For example a TNT packet only tells whether a
+conditional branch was taken or not taken, so to make use of that packet the
+decoder must know precisely which instruction was being executed.
+
+Decoding is done on-the-fly.  The decoder outputs samples in the same format as
+samples output by perf hardware events, for example as though the "instructions"
+or "branches" events had been recorded.  Presently 3 tools support this:
+'perf script', 'perf report' and 'perf inject'.  See below for more information
+on using those tools.
+
+The main distinguishing feature of Intel PT is that the decoder can determine
+the exact flow of software execution.  Intel PT can be used to understand why
+and how did software get to a certain point, or behave a certain way.  The
+software does not have to be recompiled, so Intel PT works with debug or release
+builds, however the executed images are needed - which makes use in JIT-compiled
+environments, or with self-modified code, a challenge.  Also symbols need to be
+provided to make sense of addresses.
+
+A limitation of Intel PT is that it produces huge amounts of trace data
+(hundreds of megabytes per second per core) which takes a long time to decode,
+for example two or three orders of magnitude longer than it took to collect.
+Another limitation is the performance impact of tracing, something that will
+vary depending on the use-case and architecture.
+
+
+Quickstart
+==========
+
+It is important to start small.  That is because it is easy to capture vastly
+more data than can possibly be processed.
+
+The simplest thing to do with Intel PT is userspace profiling of small programs.
+Data is captured with 'perf record' e.g. to trace 'ls' userspace-only:
+
+	perf record -e intel_pt//u ls
+
+And profiled with 'perf report' e.g.
+
+	perf report
+
+To also trace kernel space presents a problem, namely kernel self-modifying
+code.  A fairly good kernel image is available in /proc/kcore but to get an
+accurate image a copy of /proc/kcore needs to be made under the same conditions
+as the data capture.  A script perf-with-kcore can do that, but beware that the
+script makes use of 'sudo' to copy /proc/kcore.  If you have perf installed
+locally from the source tree you can do:
+
+	~/libexec/perf-core/perf-with-kcore record pt_ls -e intel_pt// -- ls
+
+which will create a directory named 'pt_ls' and put the perf.data file and
+copies of /proc/kcore, /proc/kallsyms and /proc/modules into it.  Then to use
+'perf report' becomes:
+
+	~/libexec/perf-core/perf-with-kcore report pt_ls
+
+Because samples are synthesized after-the-fact, the sampling period can be
+selected for reporting. e.g. sample every microsecond
+
+	~/libexec/perf-core/perf-with-kcore report pt_ls --itrace=i1usge
+
+See the sections below for more information about the --itrace option.
+
+Beware the smaller the period, the more samples that are produced, and the
+longer it takes to process them.
+
+Also note that the coarseness of Intel PT timing information will start to
+distort the statistical value of the sampling as the sampling period becomes
+smaller.
+
+To represent software control flow, "branches" samples are produced.  By default
+a branch sample is synthesized for every single branch.  To get an idea what
+data is available you can use the 'perf script' tool with no parameters, which
+will list all the samples.
+
+	perf record -e intel_pt//u ls
+	perf script
+
+An interesting field that is not printed by default is 'flags' which can be
+displayed as follows:
+
+	perf script -Fcomm,tid,pid,time,cpu,event,trace,ip,sym,dso,addr,symoff,flags
+
+The flags are "bcrosyiABEx" which stand for branch, call, return, conditional,
+system, asynchronous, interrupt, transaction abort, trace begin, trace end, and
+in transaction, respectively.
+
+While it is possible to create scripts to analyze the data, an alternative
+approach is available to export the data to a postgresql database.  Refer to
+script export-to-postgresql.py for more details, and to script
+call-graph-from-postgresql.py for an example of using the database.
+
+As mentioned above, it is easy to capture too much data.  One way to limit the
+data captured is to use 'snapshot' mode which is explained further below.
+Refer to 'new snapshot option' and 'Intel PT modes of operation' further below.
+
+Another problem that will be experienced is decoder errors.  They can be caused
+by inability to access the executed image, self-modified or JIT-ed code, or the
+inability to match side-band information (such as context switches and mmaps)
+which results in the decoder not knowing what code was executed.
+
+There is also the problem of perf not being able to copy the data fast enough,
+resulting in data lost because the buffer was full.  See 'Buffer handling' below
+for more details.
+
+
+perf record
+===========
+
+new event
+---------
+
+The Intel PT kernel driver creates a new PMU for Intel PT.  PMU events are
+selected by providing the PMU name followed by the "config" separated by slashes.
+An enhancement has been made to allow default "config" e.g. the option
+
+	-e intel_pt//
+
+will use a default config value.  Currently that is the same as
+
+	-e intel_pt/tsc,noretcomp=0/
+
+which is the same as
+
+	-e intel_pt/tsc=1,noretcomp=0/
+
+Note there are now new config terms - see section 'config terms' further below.
+
+The config terms are listed in /sys/devices/intel_pt/format.  They are bit
+fields within the config member of the struct perf_event_attr which is
+passed to the kernel by the perf_event_open system call.  They correspond to bit
+fields in the IA32_RTIT_CTL MSR.  Here is a list of them and their definitions:
+
+	$ grep -H . /sys/bus/event_source/devices/intel_pt/format/*
+	/sys/bus/event_source/devices/intel_pt/format/cyc:config:1
+	/sys/bus/event_source/devices/intel_pt/format/cyc_thresh:config:19-22
+	/sys/bus/event_source/devices/intel_pt/format/mtc:config:9
+	/sys/bus/event_source/devices/intel_pt/format/mtc_period:config:14-17
+	/sys/bus/event_source/devices/intel_pt/format/noretcomp:config:11
+	/sys/bus/event_source/devices/intel_pt/format/psb_period:config:24-27
+	/sys/bus/event_source/devices/intel_pt/format/tsc:config:10
+
+Note that the default config must be overridden for each term i.e.
+
+	-e intel_pt/noretcomp=0/
+
+is the same as:
+
+	-e intel_pt/tsc=1,noretcomp=0/
+
+So, to disable TSC packets use:
+
+	-e intel_pt/tsc=0/
+
+It is also possible to specify the config value explicitly:
+
+	-e intel_pt/config=0x400/
+
+Note that, as with all events, the event is suffixed with event modifiers:
+
+	u	userspace
+	k	kernel
+	h	hypervisor
+	G	guest
+	H	host
+	p	precise ip
+
+'h', 'G' and 'H' are for virtualization which is not supported by Intel PT.
+'p' is also not relevant to Intel PT.  So only options 'u' and 'k' are
+meaningful for Intel PT.
+
+perf_event_attr is displayed if the -vv option is used e.g.
+
+	------------------------------------------------------------
+	perf_event_attr:
+	type                             6
+	size                             112
+	config                           0x400
+	{ sample_period, sample_freq }   1
+	sample_type                      IP|TID|TIME|CPU|IDENTIFIER
+	read_format                      ID
+	disabled                         1
+	inherit                          1
+	exclude_kernel                   1
+	exclude_hv                       1
+	enable_on_exec                   1
+	sample_id_all                    1
+	------------------------------------------------------------
+	sys_perf_event_open: pid 31104  cpu 0  group_fd -1  flags 0x8
+	sys_perf_event_open: pid 31104  cpu 1  group_fd -1  flags 0x8
+	sys_perf_event_open: pid 31104  cpu 2  group_fd -1  flags 0x8
+	sys_perf_event_open: pid 31104  cpu 3  group_fd -1  flags 0x8
+	------------------------------------------------------------
+
+
+config terms
+------------
+
+The June 2015 version of Intel 64 and IA-32 Architectures Software Developer
+Manuals, Chapter 36 Intel Processor Trace, defined new Intel PT features.
+Some of the features are reflect in new config terms.  All the config terms are
+described below.
+
+tsc		Always supported.  Produces TSC timestamp packets to provide
+		timing information.  In some cases it is possible to decode
+		without timing information, for example a per-thread context
+		that does not overlap executable memory maps.
+
+		The default config selects tsc (i.e. tsc=1).
+
+noretcomp	Always supported.  Disables "return compression" so a TIP packet
+		is produced when a function returns.  Causes more packets to be
+		produced but might make decoding more reliable.
+
+		The default config does not select noretcomp (i.e. noretcomp=0).
+
+psb_period	Allows the frequency of PSB packets to be specified.
+
+		The PSB packet is a synchronization packet that provides a
+		starting point for decoding or recovery from errors.
+
+		Support for psb_period is indicated by:
+
+			/sys/bus/event_source/devices/intel_pt/caps/psb_cyc
+
+		which contains "1" if the feature is supported and "0"
+		otherwise.
+
+		Valid values are given by:
+
+			/sys/bus/event_source/devices/intel_pt/caps/psb_periods
+
+		which contains a hexadecimal value, the bits of which represent
+		valid values e.g. bit 2 set means value 2 is valid.
+
+		The psb_period value is converted to the approximate number of
+		trace bytes between PSB packets as:
+
+			2 ^ (value + 11)
+
+		e.g. value 3 means 16KiB bytes between PSBs
+
+		If an invalid value is entered, the error message
+		will give a list of valid values e.g.
+
+			$ perf record -e intel_pt/psb_period=15/u uname
+			Invalid psb_period for intel_pt. Valid values are: 0-5
+
+		If MTC packets are selected, the default config selects a value
+		of 3 (i.e. psb_period=3) or the nearest lower value that is
+		supported (0 is always supported).  Otherwise the default is 0.
+
+		If decoding is expected to be reliable and the buffer is large
+		then a large PSB period can be used.
+
+		Because a TSC packet is produced with PSB, the PSB period can
+		also affect the granularity to timing information in the absence
+		of MTC or CYC.
+
+mtc		Produces MTC timing packets.
+
+		MTC packets provide finer grain timestamp information than TSC
+		packets.  MTC packets record time using the hardware crystal
+		clock (CTC) which is related to TSC packets using a TMA packet.
+
+		Support for this feature is indicated by:
+
+			/sys/bus/event_source/devices/intel_pt/caps/mtc
+
+		which contains "1" if the feature is supported and
+		"0" otherwise.
+
+		The frequency of MTC packets can also be specified - see
+		mtc_period below.
+
+mtc_period	Specifies how frequently MTC packets are produced - see mtc
+		above for how to determine if MTC packets are supported.
+
+		Valid values are given by:
+
+			/sys/bus/event_source/devices/intel_pt/caps/mtc_periods
+
+		which contains a hexadecimal value, the bits of which represent
+		valid values e.g. bit 2 set means value 2 is valid.
+
+		The mtc_period value is converted to the MTC frequency as:
+
+			CTC-frequency / (2 ^ value)
+
+		e.g. value 3 means one eighth of CTC-frequency
+
+		Where CTC is the hardware crystal clock, the frequency of which
+		can be related to TSC via values provided in cpuid leaf 0x15.
+
+		If an invalid value is entered, the error message
+		will give a list of valid values e.g.
+
+			$ perf record -e intel_pt/mtc_period=15/u uname
+			Invalid mtc_period for intel_pt. Valid values are: 0,3,6,9
+
+		The default value is 3 or the nearest lower value
+		that is supported (0 is always supported).
+
+cyc		Produces CYC timing packets.
+
+		CYC packets provide even finer grain timestamp information than
+		MTC and TSC packets.  A CYC packet contains the number of CPU
+		cycles since the last CYC packet. Unlike MTC and TSC packets,
+		CYC packets are only sent when another packet is also sent.
+
+		Support for this feature is indicated by:
+
+			/sys/bus/event_source/devices/intel_pt/caps/psb_cyc
+
+		which contains "1" if the feature is supported and
+		"0" otherwise.
+
+		The number of CYC packets produced can be reduced by specifying
+		a threshold - see cyc_thresh below.
+
+cyc_thresh	Specifies how frequently CYC packets are produced - see cyc
+		above for how to determine if CYC packets are supported.
+
+		Valid cyc_thresh values are given by:
+
+			/sys/bus/event_source/devices/intel_pt/caps/cycle_thresholds
+
+		which contains a hexadecimal value, the bits of which represent
+		valid values e.g. bit 2 set means value 2 is valid.
+
+		The cyc_thresh value represents the minimum number of CPU cycles
+		that must have passed before a CYC packet can be sent.  The
+		number of CPU cycles is:
+
+			2 ^ (value - 1)
+
+		e.g. value 4 means 8 CPU cycles must pass before a CYC packet
+		can be sent.  Note a CYC packet is still only sent when another
+		packet is sent, not at, e.g. every 8 CPU cycles.
+
+		If an invalid value is entered, the error message
+		will give a list of valid values e.g.
+
+			$ perf record -e intel_pt/cyc,cyc_thresh=15/u uname
+			Invalid cyc_thresh for intel_pt. Valid values are: 0-12
+
+		CYC packets are not requested by default.
+
+
+new snapshot option
+-------------------
+
+The difference between full trace and snapshot from the kernel's perspective is
+that in full trace we don't overwrite trace data that the user hasn't collected
+yet (and indicated that by advancing aux_tail), whereas in snapshot mode we let
+the trace run and overwrite older data in the buffer so that whenever something
+interesting happens, we can stop it and grab a snapshot of what was going on
+around that interesting moment.
+
+To select snapshot mode a new option has been added:
+
+	-S
+
+Optionally it can be followed by the snapshot size e.g.
+
+	-S0x100000
+
+The default snapshot size is the auxtrace mmap size.  If neither auxtrace mmap size
+nor snapshot size is specified, then the default is 4MiB for privileged users
+(or if /proc/sys/kernel/perf_event_paranoid < 0), 128KiB for unprivileged users.
+If an unprivileged user does not specify mmap pages, the mmap pages will be
+reduced as described in the 'new auxtrace mmap size option' section below.
+
+The snapshot size is displayed if the option -vv is used e.g.
+
+	Intel PT snapshot size: %zu
+
+
+new auxtrace mmap size option
+---------------------------
+
+Intel PT buffer size is specified by an addition to the -m option e.g.
+
+	-m,16
+
+selects a buffer size of 16 pages i.e. 64KiB.
+
+Note that the existing functionality of -m is unchanged.  The auxtrace mmap size
+is specified by the optional addition of a comma and the value.
+
+The default auxtrace mmap size for Intel PT is 4MiB/page_size for privileged users
+(or if /proc/sys/kernel/perf_event_paranoid < 0), 128KiB for unprivileged users.
+If an unprivileged user does not specify mmap pages, the mmap pages will be
+reduced from the default 512KiB/page_size to 256KiB/page_size, otherwise the
+user is likely to get an error as they exceed their mlock limit (Max locked
+memory as shown in /proc/self/limits).  Note that perf does not count the first
+512KiB (actually /proc/sys/kernel/perf_event_mlock_kb minus 1 page) per cpu
+against the mlock limit so an unprivileged user is allowed 512KiB per cpu plus
+their mlock limit (which defaults to 64KiB but is not multiplied by the number
+of cpus).
+
+In full-trace mode, powers of two are allowed for buffer size, with a minimum
+size of 2 pages.  In snapshot mode, it is the same but the minimum size is
+1 page.
+
+The mmap size and auxtrace mmap size are displayed if the -vv option is used e.g.
+
+	mmap length 528384
+	auxtrace mmap length 4198400
+
+
+Intel PT modes of operation
+---------------------------
+
+Intel PT can be used in 2 modes:
+	full-trace mode
+	snapshot mode
+
+Full-trace mode traces continuously e.g.
+
+	perf record -e intel_pt//u uname
+
+Snapshot mode captures the available data when a signal is sent e.g.
+
+	perf record -v -e intel_pt//u -S ./loopy 1000000000 &
+	[1] 11435
+	kill -USR2 11435
+	Recording AUX area tracing snapshot
+
+Note that the signal sent is SIGUSR2.
+Note that "Recording AUX area tracing snapshot" is displayed because the -v
+option is used.
+
+The 2 modes cannot be used together.
+
+
+Buffer handling
+---------------
+
+There may be buffer limitations (i.e. single ToPa entry) which means that actual
+buffer sizes are limited to powers of 2 up to 4MiB (MAX_ORDER).  In order to
+provide other sizes, and in particular an arbitrarily large size, multiple
+buffers are logically concatenated.  However an interrupt must be used to switch
+between buffers.  That has two potential problems:
+	a) the interrupt may not be handled in time so that the current buffer
+	becomes full and some trace data is lost.
+	b) the interrupts may slow the system and affect the performance
+	results.
+
+If trace data is lost, the driver sets 'truncated' in the PERF_RECORD_AUX event
+which the tools report as an error.
+
+In full-trace mode, the driver waits for data to be copied out before allowing
+the (logical) buffer to wrap-around.  If data is not copied out quickly enough,
+again 'truncated' is set in the PERF_RECORD_AUX event.  If the driver has to
+wait, the intel_pt event gets disabled.  Because it is difficult to know when
+that happens, perf tools always re-enable the intel_pt event after copying out
+data.
+
+
+Intel PT and build ids
+----------------------
+
+By default "perf record" post-processes the event stream to find all build ids
+for executables for all addresses sampled.  Deliberately, Intel PT is not
+decoded for that purpose (it would take too long).  Instead the build ids for
+all executables encountered (due to mmap, comm or task events) are included
+in the perf.data file.
+
+To see buildids included in the perf.data file use the command:
+
+	perf buildid-list
+
+If the perf.data file contains Intel PT data, that is the same as:
+
+	perf buildid-list --with-hits
+
+
+Snapshot mode and event disabling
+---------------------------------
+
+In order to make a snapshot, the intel_pt event is disabled using an IOCTL,
+namely PERF_EVENT_IOC_DISABLE.  However doing that can also disable the
+collection of side-band information.  In order to prevent that,  a dummy
+software event has been introduced that permits tracking events (like mmaps) to
+continue to be recorded while intel_pt is disabled.  That is important to ensure
+there is complete side-band information to allow the decoding of subsequent
+snapshots.
+
+A test has been created for that.  To find the test:
+
+	perf test list
+	...
+	23: Test using a dummy software event to keep tracking
+
+To run the test:
+
+	perf test 23
+	23: Test using a dummy software event to keep tracking     : Ok
+
+
+perf record modes (nothing new here)
+------------------------------------
+
+perf record essentially operates in one of three modes:
+	per thread
+	per cpu
+	workload only
+
+"per thread" mode is selected by -t or by --per-thread (with -p or -u or just a
+workload).
+"per cpu" is selected by -C or -a.
+"workload only" mode is selected by not using the other options but providing a
+command to run (i.e. the workload).
+
+In per-thread mode an exact list of threads is traced.  There is no inheritance.
+Each thread has its own event buffer.
+
+In per-cpu mode all processes (or processes from the selected cgroup i.e. -G
+option, or processes selected with -p or -u) are traced.  Each cpu has its own
+buffer. Inheritance is allowed.
+
+In workload-only mode, the workload is traced but with per-cpu buffers.
+Inheritance is allowed.  Note that you can now trace a workload in per-thread
+mode by using the --per-thread option.
+
+
+Privileged vs non-privileged users
+----------------------------------
+
+Unless /proc/sys/kernel/perf_event_paranoid is set to -1, unprivileged users
+have memory limits imposed upon them.  That affects what buffer sizes they can
+have as outlined above.
+
+Unless /proc/sys/kernel/perf_event_paranoid is set to -1, unprivileged users are
+not permitted to use tracepoints which means there is insufficient side-band
+information to decode Intel PT in per-cpu mode, and potentially workload-only
+mode too if the workload creates new processes.
+
+Note also, that to use tracepoints, read-access to debugfs is required.  So if
+debugfs is not mounted or the user does not have read-access, it will again not
+be possible to decode Intel PT in per-cpu mode.
+
+
+sched_switch tracepoint
+-----------------------
+
+The sched_switch tracepoint is used to provide side-band data for Intel PT
+decoding.  sched_switch events are automatically added. e.g. the second event
+shown below
+
+	$ perf record -vv -e intel_pt//u uname
+	------------------------------------------------------------
+	perf_event_attr:
+	type                             6
+	size                             112
+	config                           0x400
+	{ sample_period, sample_freq }   1
+	sample_type                      IP|TID|TIME|CPU|IDENTIFIER
+	read_format                      ID
+	disabled                         1
+	inherit                          1
+	exclude_kernel                   1
+	exclude_hv                       1
+	enable_on_exec                   1
+	sample_id_all                    1
+	------------------------------------------------------------
+	sys_perf_event_open: pid 31104  cpu 0  group_fd -1  flags 0x8
+	sys_perf_event_open: pid 31104  cpu 1  group_fd -1  flags 0x8
+	sys_perf_event_open: pid 31104  cpu 2  group_fd -1  flags 0x8
+	sys_perf_event_open: pid 31104  cpu 3  group_fd -1  flags 0x8
+	------------------------------------------------------------
+	perf_event_attr:
+	type                             2
+	size                             112
+	config                           0x108
+	{ sample_period, sample_freq }   1
+	sample_type                      IP|TID|TIME|CPU|PERIOD|RAW|IDENTIFIER
+	read_format                      ID
+	inherit                          1
+	sample_id_all                    1
+	exclude_guest                    1
+	------------------------------------------------------------
+	sys_perf_event_open: pid -1  cpu 0  group_fd -1  flags 0x8
+	sys_perf_event_open: pid -1  cpu 1  group_fd -1  flags 0x8
+	sys_perf_event_open: pid -1  cpu 2  group_fd -1  flags 0x8
+	sys_perf_event_open: pid -1  cpu 3  group_fd -1  flags 0x8
+	------------------------------------------------------------
+	perf_event_attr:
+	type                             1
+	size                             112
+	config                           0x9
+	{ sample_period, sample_freq }   1
+	sample_type                      IP|TID|TIME|IDENTIFIER
+	read_format                      ID
+	disabled                         1
+	inherit                          1
+	exclude_kernel                   1
+	exclude_hv                       1
+	mmap                             1
+	comm                             1
+	enable_on_exec                   1
+	task                             1
+	sample_id_all                    1
+	mmap2                            1
+	comm_exec                        1
+	------------------------------------------------------------
+	sys_perf_event_open: pid 31104  cpu 0  group_fd -1  flags 0x8
+	sys_perf_event_open: pid 31104  cpu 1  group_fd -1  flags 0x8
+	sys_perf_event_open: pid 31104  cpu 2  group_fd -1  flags 0x8
+	sys_perf_event_open: pid 31104  cpu 3  group_fd -1  flags 0x8
+	mmap size 528384B
+	AUX area mmap length 4194304
+	perf event ring buffer mmapped per cpu
+	Synthesizing auxtrace information
+	Linux
+	[ perf record: Woken up 1 times to write data ]
+	[ perf record: Captured and wrote 0.042 MB perf.data ]
+
+Note, the sched_switch event is only added if the user is permitted to use it
+and only in per-cpu mode.
+
+Note also, the sched_switch event is only added if TSC packets are requested.
+That is because, in the absence of timing information, the sched_switch events
+cannot be matched against the Intel PT trace.
+
+
+perf script
+===========
+
+By default, perf script will decode trace data found in the perf.data file.
+This can be further controlled by new option --itrace.
+
+
+New --itrace option
+-------------------
+
+Having no option is the same as
+
+	--itrace
+
+which, in turn, is the same as
+
+	--itrace=ibxe
+
+The letters are:
+
+	i	synthesize "instructions" events
+	b	synthesize "branches" events
+	x	synthesize "transactions" events
+	c	synthesize branches events (calls only)
+	r	synthesize branches events (returns only)
+	e	synthesize tracing error events
+	d	create a debug log
+	g	synthesize a call chain (use with i or x)
+	l	synthesize last branch entries (use with i or x)
+
+"Instructions" events look like they were recorded by "perf record -e
+instructions".
+
+"Branches" events look like they were recorded by "perf record -e branches". "c"
+and "r" can be combined to get calls and returns.
+
+"Transactions" events correspond to the start or end of transactions. The
+'flags' field can be used in perf script to determine whether the event is a
+tranasaction start, commit or abort.
+
+Error events are new.  They show where the decoder lost the trace.  Error events
+are quite important.  Users must know if what they are seeing is a complete
+picture or not.
+
+The "d" option will cause the creation of a file "intel_pt.log" containing all
+decoded packets and instructions.  Note that this option slows down the decoder
+and that the resulting file may be very large.
+
+In addition, the period of the "instructions" event can be specified. e.g.
+
+	--itrace=i10us
+
+sets the period to 10us i.e. one  instruction sample is synthesized for each 10
+microseconds of trace.  Alternatives to "us" are "ms" (milliseconds),
+"ns" (nanoseconds), "t" (TSC ticks) or "i" (instructions).
+
+"ms", "us" and "ns" are converted to TSC ticks.
+
+The timing information included with Intel PT does not give the time of every
+instruction.  Consequently, for the purpose of sampling, the decoder estimates
+the time since the last timing packet based on 1 tick per instruction.  The time
+on the sample is *not* adjusted and reflects the last known value of TSC.
+
+For Intel PT, the default period is 100us.
+
+Setting it to a zero period means "as often as possible".
+
+In the case of Intel PT that is the same as a period of 1 and a unit of
+'instructions' (i.e. --itrace=i1i).
+
+Also the call chain size (default 16, max. 1024) for instructions or
+transactions events can be specified. e.g.
+
+	--itrace=ig32
+	--itrace=xg32
+
+Also the number of last branch entries (default 64, max. 1024) for instructions or
+transactions events can be specified. e.g.
+
+       --itrace=il10
+       --itrace=xl10
+
+Note that last branch entries are cleared for each sample, so there is no overlap
+from one sample to the next.
+
+To disable trace decoding entirely, use the option --no-itrace.
+
+
+dump option
+-----------
+
+perf script has an option (-D) to "dump" the events i.e. display the binary
+data.
+
+When -D is used, Intel PT packets are displayed.  The packet decoder does not
+pay attention to PSB packets, but just decodes the bytes - so the packets seen
+by the actual decoder may not be identical in places where the data is corrupt.
+One example of that would be when the buffer-switching interrupt has been too
+slow, and the buffer has been filled completely.  In that case, the last packet
+in the buffer might be truncated and immediately followed by a PSB as the trace
+continues in the next buffer.
+
+To disable the display of Intel PT packets, combine the -D option with
+--no-itrace.
+
+
+perf report
+===========
+
+By default, perf report will decode trace data found in the perf.data file.
+This can be further controlled by new option --itrace exactly the same as
+perf script, with the exception that the default is --itrace=igxe.
+
+
+perf inject
+===========
+
+perf inject also accepts the --itrace option in which case tracing data is
+removed and replaced with the synthesized events. e.g.
+
+	perf inject --itrace -i perf.data -o perf.data.new
+
+Below is an example of using Intel PT with autofdo.  It requires autofdo
+(https://github.com/google/autofdo) and gcc version 5.  The bubble
+sort example is from the AutoFDO tutorial (https://gcc.gnu.org/wiki/AutoFDO/Tutorial)
+amended to take the number of elements as a parameter.
+
+	$ gcc-5 -O3 sort.c -o sort_optimized
+	$ ./sort_optimized 30000
+	Bubble sorting array of 30000 elements
+	2254 ms
+
+	$ cat ~/.perfconfig
+	[intel-pt]
+		mispred-all
+
+	$ perf record -e intel_pt//u ./sort 3000
+	Bubble sorting array of 3000 elements
+	58 ms
+	[ perf record: Woken up 2 times to write data ]
+	[ perf record: Captured and wrote 3.939 MB perf.data ]
+	$ perf inject -i perf.data -o inj --itrace=i100usle --strip
+	$ ./create_gcov --binary=./sort --profile=inj --gcov=sort.gcov -gcov_version=1
+	$ gcc-5 -O3 -fauto-profile=sort.gcov sort.c -o sort_autofdo
+	$ ./sort_autofdo 30000
+	Bubble sorting array of 30000 elements
+	2155 ms
+
+Note there is currently no advantage to using Intel PT instead of LBR, but
+that may change in the future if greater use is made of the data.
diff --git a/kernel/tools/perf/Documentation/itrace.txt b/kernel/tools/perf/Documentation/itrace.txt
new file mode 100644
index 000000000..65453f4c7
--- /dev/null
+++ b/kernel/tools/perf/Documentation/itrace.txt
@@ -0,0 +1,26 @@
+		i	synthesize instructions events
+		b	synthesize branches events
+		c	synthesize branches events (calls only)
+		r	synthesize branches events (returns only)
+		x	synthesize transactions events
+		e	synthesize error events
+		d	create a debug log
+		g	synthesize a call chain (use with i or x)
+		l	synthesize last branch entries (use with i or x)
+
+	The default is all events i.e. the same as --itrace=ibxe
+
+	In addition, the period (default 100000) for instructions events
+	can be specified in units of:
+
+		i	instructions
+		t	ticks
+		ms	milliseconds
+		us	microseconds
+		ns	nanoseconds (default)
+
+	Also the call chain size (default 16, max. 1024) for instructions or
+	transactions events can be specified.
+
+	Also the number of last branch entries (default 64, max. 1024) for
+	instructions or transactions events can be specified.
diff --git a/kernel/tools/perf/Documentation/perf-bench.txt b/kernel/tools/perf/Documentation/perf-bench.txt
index f6480cbf3..34750fc32 100644
--- a/kernel/tools/perf/Documentation/perf-bench.txt
+++ b/kernel/tools/perf/Documentation/perf-bench.txt
@@ -82,7 +82,7 @@ Be multi thread instead of multi process
 Specify number of groups
 
 -l::
---loop=::
+--nr_loops=::
 Specify number of loops
 
 Example of *messaging*
@@ -139,64 +139,48 @@ Suite for evaluating performance of simple memory copy in various ways.
 Options of *memcpy*
 ^^^^^^^^^^^^^^^^^^^
 -l::
---length::
-Specify length of memory to copy (default: 1MB).
+--size::
+Specify size of memory to copy (default: 1MB).
 Available units are B, KB, MB, GB and TB (case insensitive).
 
--r::
---routine::
-Specify routine to copy (default: default).
-Available routines are depend on the architecture.
+-f::
+--function::
+Specify function to copy (default: default).
+Available functions are depend on the architecture.
 On x86-64, x86-64-unrolled, x86-64-movsq and x86-64-movsb are supported.
 
--i::
---iterations::
+-l::
+--nr_loops::
 Repeat memcpy invocation this number of times.
 
 -c::
---cycle::
+--cycles::
 Use perf's cpu-cycles event instead of gettimeofday syscall.
 
--o::
---only-prefault::
-Show only the result with page faults before memcpy.
-
--n::
---no-prefault::
-Show only the result without page faults before memcpy.
-
 *memset*::
 Suite for evaluating performance of simple memory set in various ways.
 
 Options of *memset*
 ^^^^^^^^^^^^^^^^^^^
 -l::
---length::
-Specify length of memory to set (default: 1MB).
+--size::
+Specify size of memory to set (default: 1MB).
 Available units are B, KB, MB, GB and TB (case insensitive).
 
--r::
---routine::
-Specify routine to set (default: default).
-Available routines are depend on the architecture.
+-f::
+--function::
+Specify function to set (default: default).
+Available functions are depend on the architecture.
 On x86-64, x86-64-unrolled, x86-64-stosq and x86-64-stosb are supported.
 
--i::
---iterations::
+-l::
+--nr_loops::
 Repeat memset invocation this number of times.
 
 -c::
---cycle::
+--cycles::
 Use perf's cpu-cycles event instead of gettimeofday syscall.
 
--o::
---only-prefault::
-Show only the result with page faults before memset.
-
--n::
---no-prefault::
-Show only the result without page faults before memset.
-
 SUITES FOR 'numa'
 ~~~~~~~~~~~~~~~~~
 *mem*::
@@ -210,9 +194,16 @@ Suite for evaluating hash tables.
 *wake*::
 Suite for evaluating wake calls.
 
+*wake-parallel*::
+Suite for evaluating parallel wake calls.
+
 *requeue*::
 Suite for evaluating requeue calls.
 
+*lock-pi*::
+Suite for evaluating futex lock_pi calls.
+
+
 SEE ALSO
 --------
 linkperf:perf[1]
diff --git a/kernel/tools/perf/Documentation/perf-inject.txt b/kernel/tools/perf/Documentation/perf-inject.txt
index dc7442cf3..0b1cedeef 100644
--- a/kernel/tools/perf/Documentation/perf-inject.txt
+++ b/kernel/tools/perf/Documentation/perf-inject.txt
@@ -44,6 +44,15 @@ OPTIONS
 --kallsyms=<file>::
 	kallsyms pathname
 
+--itrace::
+	Decode Instruction Tracing data, replacing it with synthesized events.
+	Options are:
+
+include::itrace.txt[]
+
+--strip::
+	Use with --itrace to strip out non-synthesized events.
+
 SEE ALSO
 --------
 linkperf:perf-record[1], linkperf:perf-report[1], linkperf:perf-archive[1]
diff --git a/kernel/tools/perf/Documentation/perf-kmem.txt b/kernel/tools/perf/Documentation/perf-kmem.txt
index 23219c65c..ff0f433b3 100644
--- a/kernel/tools/perf/Documentation/perf-kmem.txt
+++ b/kernel/tools/perf/Documentation/perf-kmem.txt
@@ -37,7 +37,11 @@ OPTIONS
 
 -s <key[,key2...]>::
 --sort=<key[,key2...]>::
-	Sort the output (default: frag,hit,bytes)
+	Sort the output (default: 'frag,hit,bytes' for slab and 'bytes,hit'
+	for page).  Available sort keys are 'ptr, callsite, bytes, hit,
+	pingpong, frag' for slab and 'page, callsite, bytes, hit, order,
+	migtype, gfp' for page.  This option should be preceded by one of the
+	mode selection options - i.e. --slab, --page, --alloc and/or --caller.
 
 -l <num>::
 --line=<num>::
@@ -52,6 +56,11 @@ OPTIONS
 --page::
 	Analyze page allocator events
 
+--live::
+	Show live page stat.  The perf kmem shows total allocation stat by
+	default, but this option shows live (currently allocated) pages
+	instead.  (This option works with --page option only)
+
 SEE ALSO
 --------
 linkperf:perf-record[1]
diff --git a/kernel/tools/perf/Documentation/perf-kvm.txt b/kernel/tools/perf/Documentation/perf-kvm.txt
index 6252e7760..6a5bb2b17 100644
--- a/kernel/tools/perf/Documentation/perf-kvm.txt
+++ b/kernel/tools/perf/Documentation/perf-kvm.txt
@@ -151,6 +151,12 @@ STAT LIVE OPTIONS
        Show events other than HLT (x86 only) or Wait state (s390 only)
        that take longer than duration usecs.
 
+--proc-map-timeout::
+	When processing pre-existing threads /proc/XXX/mmap, it may take
+	a long time, because the file may be huge. A time out is needed
+	in such cases.
+	This option sets the time out limit. The default value is 500 ms.
+
 SEE ALSO
 --------
 linkperf:perf-top[1], linkperf:perf-record[1], linkperf:perf-report[1],
diff --git a/kernel/tools/perf/Documentation/perf-list.txt b/kernel/tools/perf/Documentation/perf-list.txt
index bada8933f..79483f40e 100644
--- a/kernel/tools/perf/Documentation/perf-list.txt
+++ b/kernel/tools/perf/Documentation/perf-list.txt
@@ -30,6 +30,7 @@ counted. The following modifiers exist:
  G - guest counting (in KVM guests)
  H - host counting (not in KVM guests)
  p - precise level
+ P - use maximum detected precise level
  S - read sample value (PERF_SAMPLE_READ)
  D - pin the event to the PMU
 
@@ -125,6 +126,8 @@ To limit the list use:
 . If none of the above is matched, it will apply the supplied glob to all
   events, printing the ones that match.
 
+. As a last resort, it will do a substring search in all event names.
+
 One or more types can be used at the same time, listing the events for the
 types specified.
 
diff --git a/kernel/tools/perf/Documentation/perf-probe.txt b/kernel/tools/perf/Documentation/perf-probe.txt
index 239609c09..3a8a9ba2b 100644
--- a/kernel/tools/perf/Documentation/perf-probe.txt
+++ b/kernel/tools/perf/Documentation/perf-probe.txt
@@ -14,11 +14,13 @@ or
 or
 'perf probe' [options] --del='[GROUP:]EVENT' [...]
 or
-'perf probe' --list
+'perf probe' --list[=[GROUP:]EVENT]
 or
 'perf probe' [options] --line='LINE'
 or
 'perf probe' [options] --vars='PROBEPOINT'
+or
+'perf probe' [options] --funcs
 
 DESCRIPTION
 -----------
@@ -64,8 +66,8 @@ OPTIONS
 	classes(e.g. [a-z], [!A-Z]).
 
 -l::
---list::
-	List up current probe events.
+--list[=[GROUP:]EVENT]::
+	List up current probe events. This can also accept filtering patterns of event names.
 
 -L::
 --line=::
@@ -81,10 +83,15 @@ OPTIONS
 	(Only for --vars) Show external defined variables in addition to local
 	variables.
 
+--no-inlines::
+	(Only for --add) Search only for non-inlined functions. The functions
+	which do not have instances are ignored.
+
 -F::
---funcs::
+--funcs[=FILTER]::
 	Show available functions in given module or kernel. With -x/--exec,
 	can also list functions in a user space executable / shared library.
+	This also can accept a FILTER rule argument.
 
 --filter=FILTER::
 	(Only for --vars and --funcs) Set filter. FILTER is a combination of glob
@@ -148,7 +155,7 @@ Each probe argument follows below syntax.
  [NAME=]LOCALVAR|$retval|%REG|@SYMBOL[:TYPE]
 
 'NAME' specifies the name of this argument (optional). You can use the name of local variable, local data structure member (e.g. var->field, var.field2), local array with fixed index (e.g. array[1], var->array[0], var->pointer[2]), or kprobe-tracer argument format (e.g. $retval, %ax, etc). Note that the name of this argument will be set as the last member name if you specify a local data structure member (e.g. field2 for 'var->field1.field2'.)
-'$vars' special argument is also available for NAME, it is expanded to the local variables which can access at given probe point.
+'$vars' and '$params' special arguments are also available for NAME, '$vars' is expanded to the local variables (including function parameters) which can access at given probe point. '$params' is expanded to only the function parameters.
 'TYPE' casts the type of this argument (optional). If omitted, perf probe automatically set the type based on debuginfo. You can specify 'string' type only for the local variable or structure member which is an array of or a pointer to 'char' or 'unsigned char' type.
 
 On x86 systems %REG is always the short form of the register: for example %AX. %RAX or %EAX is not valid.
diff --git a/kernel/tools/perf/Documentation/perf-record.txt b/kernel/tools/perf/Documentation/perf-record.txt
index 4847a793d..e630a7d2c 100644
--- a/kernel/tools/perf/Documentation/perf-record.txt
+++ b/kernel/tools/perf/Documentation/perf-record.txt
@@ -45,6 +45,21 @@ OPTIONS
           param1 and param2 are defined as formats for the PMU in:
           /sys/bus/event_sources/devices/<pmu>/format/*
 
+	  There are also some params which are not defined in .../<pmu>/format/*.
+	  These params can be used to overload default config values per event.
+	  Here is a list of the params.
+	  - 'period': Set event sampling period
+	  - 'freq': Set event sampling frequency
+	  - 'time': Disable/enable time stamping. Acceptable values are 1 for
+		    enabling time stamping. 0 for disabling time stamping.
+		    The default is 1.
+	  - 'call-graph': Disable/enable callgraph. Acceptable str are "fp" for
+			 FP mode, "dwarf" for DWARF mode, "lbr" for LBR mode and
+			 "no" for disable callgraph.
+	  - 'stack-size': user stack size for dwarf mode
+	  Note: If user explicitly sets options which conflict with the params,
+	  the value set by the params will be overridden.
+
         - a hardware breakpoint event in the form of '\mem:addr[/len][:access]'
           where addr is the address in memory you want to break in.
           Access is the memory access type (read, write, execute) it can
@@ -61,7 +76,16 @@ OPTIONS
 	  "perf report" to view group events together.
 
 --filter=<filter>::
-        Event filter.
+        Event filter. This option should follow a event selector (-e) which
+	selects tracepoint event(s). Multiple '--filter' options are combined
+	using '&&'.
+
+--exclude-perf::
+	Don't record events issued by perf itself. This option should follow
+	a event selector (-e) which selects tracepoint event(s). It adds a
+	filter expression 'common_pid != $PERFPID' to filters. If other
+	'--filter' exists, the new filter expression will be combined with
+	them by '&&'.
 
 -a::
 --all-cpus::
@@ -108,6 +132,8 @@ OPTIONS
 	Number of mmap data pages (must be a power of two) or size
 	specification with appended unit character - B/K/M/G. The
 	size is rounded up to have nearest pages power of two value.
+	Also, by adding a comma, the number of mmap pages for AUX
+	area tracing can be specified.
 
 --group::
 	Put all events in a single event group.  This precedes the --event
@@ -118,7 +144,7 @@ OPTIONS
 
 --call-graph::
 	Setup and enable call-graph (stack chain/backtrace) recording,
-	implies -g.
+	implies -g.  Default is "fp".
 
 	Allows specifying "fp" (frame pointer) or "dwarf"
 	(DWARF's CFI - Call Frame Information) or "lbr"
@@ -128,13 +154,18 @@ OPTIONS
 	In some systems, where binaries are build with gcc
 	--fomit-frame-pointer, using the "fp" method will produce bogus
 	call graphs, using "dwarf", if available (perf tools linked to
-	the libunwind library) should be used instead.
+	the libunwind or libdw library) should be used instead.
 	Using the "lbr" method doesn't require any compiler options. It
 	will produce call graphs from the hardware LBR registers. The
 	main limition is that it is only available on new Intel
 	platforms, such as Haswell. It can only get user call chain. It
 	doesn't work with branch stack sampling at the same time.
 
+	When "dwarf" recording is used, perf also records (user) stack dump
+	when sampled.  Default size of the stack dump is 8192 (bytes).
+	User can change the size by passing the size after comma like
+	"--call-graph dwarf,4096".
+
 -q::
 --quiet::
 	Don't print any message, useful for scripting.
@@ -145,16 +176,21 @@ OPTIONS
 
 -s::
 --stat::
-	Per thread counts.
+	Record per-thread event counts.  Use it with 'perf report -T' to see
+	the values.
 
 -d::
 --data::
-	Sample addresses.
+	Record the sample addresses.
 
 -T::
 --timestamp::
-	Sample timestamps. Use it with 'perf report -D' to see the timestamps,
-	for instance.
+	Record the sample timestamps. Use it with 'perf report -D' to see the
+	timestamps, for instance.
+
+-P::
+--period::
+	Record the sample period.
 
 -n::
 --no-samples::
@@ -205,6 +241,7 @@ following filters are defined:
         - any_call: any function call or system call
         - any_ret: any function return or system call return
         - ind_call: any indirect branch
+        - call: direct calls, including far (to/from kernel) calls
         - u:  only when the branch target is at the user level
         - k: only when the branch target is in the kernel
         - hv: only when the target is at the hypervisor level
@@ -245,7 +282,11 @@ filter out the startup phase of the program, which is often very different.
 --intr-regs::
 Capture machine state (registers) at interrupt, i.e., on counter overflows for
 each sample. List of captured registers depends on the architecture. This option
-is off by default.
+is off by default. It is possible to select the registers to sample using their
+symbolic names, e.g. on x86, ax, si. To list the available registers use
+--intr-regs=\?. To name registers, pass a comma separated list such as
+--intr-regs=ax,bx. The list of register is architecture dependent.
+
 
 --running-time::
 Record running and enabled time for read events (:S)
@@ -257,6 +298,28 @@ records. See clock_gettime(). In particular CLOCK_MONOTONIC and
 CLOCK_MONOTONIC_RAW are supported, some events might also allow
 CLOCK_BOOTTIME, CLOCK_REALTIME and CLOCK_TAI.
 
+-S::
+--snapshot::
+Select AUX area tracing Snapshot Mode. This option is valid only with an
+AUX area tracing event. Optionally the number of bytes to capture per
+snapshot can be specified. In Snapshot Mode, trace data is captured only when
+signal SIGUSR2 is received.
+
+--proc-map-timeout::
+When processing pre-existing threads /proc/XXX/mmap, it may take a long time,
+because the file may be huge. A time out is needed in such cases.
+This option sets the time out limit. The default value is 500 ms.
+
+--switch-events::
+Record context switch events i.e. events of type PERF_RECORD_SWITCH or
+PERF_RECORD_SWITCH_CPU_WIDE.
+
+--clang-path::
+Path to clang binary to use for compiling BPF scriptlets.
+
+--clang-opt::
+Options passed to clang when compiling BPF scriptlets.
+
 SEE ALSO
 --------
 linkperf:perf-stat[1], linkperf:perf-list[1]
diff --git a/kernel/tools/perf/Documentation/perf-report.txt b/kernel/tools/perf/Documentation/perf-report.txt
index 4879cf638..5ce8da1e1 100644
--- a/kernel/tools/perf/Documentation/perf-report.txt
+++ b/kernel/tools/perf/Documentation/perf-report.txt
@@ -29,12 +29,13 @@ OPTIONS
 --show-nr-samples::
 	Show the number of samples for each symbol
 
---showcpuutilization::
+--show-cpu-utilization::
         Show sample percentage for different cpu modes.
 
 -T::
 --threads::
-	Show per-thread event counters
+	Show per-thread event counters.  The input data file should be recorded
+	with -s option.
 -c::
 --comms=::
 	Only consider symbols in these comms. CSV that understands
@@ -67,7 +68,7 @@ OPTIONS
 --sort=::
 	Sort histogram entries by given key(s) - multiple keys can be specified
 	in CSV format.  Following sort keys are available:
-	pid, comm, dso, symbol, parent, cpu, srcline, weight, local_weight.
+	pid, comm, dso, symbol, parent, cpu, socket, srcline, weight, local_weight.
 
 	Each key has following meaning:
 
@@ -78,8 +79,11 @@ OPTIONS
 	- parent: name of function matched to the parent regex filter. Unmatched
 	entries are displayed as "[other]".
 	- cpu: cpu number the task ran at the time of sample
+	- socket: processor socket number the task ran at the time of sample
 	- srcline: filename and line number executed at the time of sample.  The
 	DWARF debugging info must be provided.
+	- srcfile: file name of the source file of the same. Requires dwarf
+	information.
 	- weight: Event specific weight, e.g. memory latency or transaction
 	abort cost. This is the global weight.
 	- local_weight: Local weight version of the weight above.
@@ -108,6 +112,7 @@ OPTIONS
 	- mispredict: "N" for predicted branch, "Y" for mispredicted branch
 	- in_tx: branch in TSX transaction
 	- abort: TSX transaction abort.
+	- cycles: Cycles in basic block
 
 	And default sort keys are changed to comm, dso_from, symbol_from, dso_to
 	and symbol_to, see '--branch-stack'.
@@ -164,41 +169,54 @@ OPTIONS
 --dump-raw-trace::
         Dump raw trace in ASCII.
 
--g [type,min[,limit],order[,key][,branch]]::
---call-graph::
-        Display call chains using type, min percent threshold, optional print
-	limit and order.
-	type can be either:
+-g::
+--call-graph=<print_type,threshold[,print_limit],order,sort_key,branch>::
+        Display call chains using type, min percent threshold, print limit,
+	call order, sort key and branch.  Note that ordering of parameters is not
+	fixed so any parement can be given in an arbitraty order.  One exception
+	is the print_limit which should be preceded by threshold.
+
+	print_type can be either:
 	- flat: single column, linear exposure of call chains.
-	- graph: use a graph tree, displaying absolute overhead rates.
+	- graph: use a graph tree, displaying absolute overhead rates. (default)
 	- fractal: like graph, but displays relative rates. Each branch of
-		 the tree is considered as a new profiled object. +
+		 the tree is considered as a new profiled object.
+	- none: disable call chain display.
+
+	threshold is a percentage value which specifies a minimum percent to be
+	included in the output call graph.  Default is 0.5 (%).
+
+	print_limit is only applied when stdio interface is used.  It's to limit
+	number of call graph entries in a single hist entry.  Note that it needs
+	to be given after threshold (but not necessarily consecutive).
+	Default is 0 (unlimited).
 
 	order can be either:
 	- callee: callee based call graph.
 	- caller: inverted caller based call graph.
+	Default is 'caller' when --children is used, otherwise 'callee'.
 
-	key can be:
-	- function: compare on functions
+	sort_key can be:
+	- function: compare on functions (default)
 	- address: compare on individual code addresses
 
 	branch can be:
-	- branch: include last branch information in callgraph
-	when available. Usually more convenient to use --branch-history
-	for this.
-
-	Default: fractal,0.5,callee,function.
+	- branch: include last branch information in callgraph when available.
+	          Usually more convenient to use --branch-history for this.
 
 --children::
 	Accumulate callchain of children to parent entry so that then can
 	show up in the output.  The output will have a new "Children" column
 	and will be sorted on the data.  It requires callchains are recorded.
+	See the `overhead calculation' section for more details.
 
 --max-stack::
 	Set the stack depth limit when parsing the callchain, anything
 	beyond the specified depth will be ignored. This is a trade-off
 	between information loss and faster processing especially for
 	workloads that can have a very long callchain stack.
+	Note that when using the --itrace option the synthesized callchain size
+	will override this value if the synthesized callchain size is bigger.
 
 	Default: 127
 
@@ -323,6 +341,32 @@ OPTIONS
 --header-only::
 	Show only perf.data header (forces --stdio).
 
+--itrace::
+	Options for decoding instruction tracing data. The options are:
+
+include::itrace.txt[]
+
+	To disable decoding entirely, use --no-itrace.
+
+--full-source-path::
+	Show the full path for source files for srcline output.
+
+--show-ref-call-graph::
+	When multiple events are sampled, it may not be needed to collect
+	callgraphs for all of them. The sample sites are usually nearby,
+	and it's enough to collect the callgraphs on a reference event.
+	So user can use "call-graph=no" event modifier to disable callgraph
+	for other events to reduce the overhead.
+	However, perf report cannot show callgraphs for the event which
+	disable the callgraph.
+	This option extends the perf report to show reference callgraphs,
+	which collected by reference event, in no callgraph event.
+
+--socket-filter::
+	Only report the samples on the processor socket that match with this filter
+
+include::callchain-overhead-calculation.txt[]
+
 SEE ALSO
 --------
 linkperf:perf-stat[1], linkperf:perf-annotate[1]
diff --git a/kernel/tools/perf/Documentation/perf-script.txt b/kernel/tools/perf/Documentation/perf-script.txt
index 79445750f..382ddfb45 100644
--- a/kernel/tools/perf/Documentation/perf-script.txt
+++ b/kernel/tools/perf/Documentation/perf-script.txt
@@ -112,10 +112,11 @@ OPTIONS
 --debug-mode::
         Do various checks like samples ordering and lost events.
 
--f::
+-F::
 --fields::
         Comma separated list of fields to print. Options are:
-        comm, tid, pid, time, cpu, event, trace, ip, sym, dso, addr, symoff, srcline, period.
+        comm, tid, pid, time, cpu, event, trace, ip, sym, dso, addr, symoff,
+	srcline, period, iregs, brstack, brstacksym, flags.
         Field list can be prepended with the type, trace, sw or hw,
         to indicate to which event type the field list applies.
         e.g., -f sw:comm,tid,time,ip,sym  and -f trace:time,cpu,trace
@@ -165,9 +166,25 @@ OPTIONS
 
 	At this point usage is displayed, and perf-script exits.
 
+	The flags field is synthesized and may have a value when Instruction
+	Trace decoding. The flags are "bcrosyiABEx" which stand for branch,
+	call, return, conditional, system, asynchronous, interrupt,
+	transaction abort, trace begin, trace end, and in transaction,
+	respectively.
+
 	Finally, a user may not set fields to none for all event types.
 	i.e., -f "" is not allowed.
 
+	The brstack output includes branch related information with raw addresses using the
+	/v/v/v/v/ syntax in the following order:
+	FROM: branch source instruction
+	TO  : branch target instruction
+        M/P/-: M=branch target mispredicted or branch direction was mispredicted, P=target predicted or direction predicted, -=not supported
+	X/- : X=branch inside a transactional region, -=not in transaction region or not supported
+	A/- : A=TSX abort entry, -=not aborted region or not supported
+
+	The brstacksym is identical to brstack, except that the FROM and TO addresses are printed in a symbolic form if possible.
+
 -k::
 --vmlinux=<file>::
         vmlinux pathname
@@ -215,12 +232,36 @@ OPTIONS
 --show-mmap-events
 	Display mmap related events (e.g. MMAP, MMAP2).
 
+--show-switch-events
+	Display context switch events i.e. events of type PERF_RECORD_SWITCH or
+	PERF_RECORD_SWITCH_CPU_WIDE.
+
+--demangle::
+	Demangle symbol names to human readable form. It's enabled by default,
+	disable with --no-demangle.
+
+--demangle-kernel::
+	Demangle kernel symbol names to human readable form (for C++ kernels).
+
 --header
 	Show perf.data header.
 
 --header-only
 	Show only perf.data header.
 
+--itrace::
+	Options for decoding instruction tracing data. The options are:
+
+include::itrace.txt[]
+
+	To disable decoding entirely, use --no-itrace.
+
+--full-source-path::
+	Show the full path for source files for srcline output.
+
+--ns::
+	Use 9 decimal places when displaying time (i.e. show the nanoseconds)
+
 SEE ALSO
 --------
 linkperf:perf-record[1], linkperf:perf-script-perl[1],
diff --git a/kernel/tools/perf/Documentation/perf-stat.txt b/kernel/tools/perf/Documentation/perf-stat.txt
index 04e150d83..4e074a660 100644
--- a/kernel/tools/perf/Documentation/perf-stat.txt
+++ b/kernel/tools/perf/Documentation/perf-stat.txt
@@ -128,8 +128,9 @@ perf stat --repeat 10 --null --sync --pre 'make -s O=defconfig-build/clean' -- m
 
 -I msecs::
 --interval-print msecs::
-	Print count deltas every N milliseconds (minimum: 100ms)
-	example: perf stat -I 1000 -e cycles -a sleep 5
+Print count deltas every N milliseconds (minimum: 10ms)
+The overhead percentage could be high in some cases, for instance with small, sub 100ms intervals.  Use with caution.
+	example: 'perf stat -I 1000 -e cycles -a sleep 5'
 
 --per-socket::
 Aggregate counts per processor socket for system-wide mode measurements.  This
@@ -144,6 +145,10 @@ is a useful mode to detect imbalance between physical cores.  To enable this mod
 use --per-core in addition to -a. (system-wide).  The output includes the
 core number and the number of online logical processors on that physical processor.
 
+--per-thread::
+Aggregate counts per monitored threads, when monitoring threads (-t option)
+or processes (-p option).
+
 -D msecs::
 --delay msecs::
 After starting the program, wait msecs before measuring. This is useful to
diff --git a/kernel/tools/perf/Documentation/perf-top.txt b/kernel/tools/perf/Documentation/perf-top.txt
index 3265b1070..556cec09b 100644
--- a/kernel/tools/perf/Documentation/perf-top.txt
+++ b/kernel/tools/perf/Documentation/perf-top.txt
@@ -160,15 +160,16 @@ Default is to monitor all CPUS.
 -g::
 	Enables call-graph (stack chain/backtrace) recording.
 
---call-graph::
+--call-graph [mode,type,min[,limit],order[,key][,branch]]::
 	Setup and enable call-graph (stack chain/backtrace) recording,
-	implies -g.
+	implies -g.  See `--call-graph` section in perf-record and
+	perf-report man pages for details.
 
 --children::
 	Accumulate callchain of children to parent entry so that then can
 	show up in the output.  The output will have a new "Children" column
 	and will be sorted on the data.  It requires -g/--call-graph option
-	enabled.
+	enabled.  See the `overhead calculation' section for more details.
 
 --max-stack::
 	Set the stack depth limit when parsing the callchain, anything
@@ -201,6 +202,33 @@ Default is to monitor all CPUS.
 	Force each column width to the provided list, for large terminal
 	readability.  0 means no limit (default behavior).
 
+--proc-map-timeout::
+	When processing pre-existing threads /proc/XXX/mmap, it may take
+	a long time, because the file may be huge. A time out is needed
+	in such cases.
+	This option sets the time out limit. The default value is 500 ms.
+
+
+-b::
+--branch-any::
+	Enable taken branch stack sampling. Any type of taken branch may be sampled.
+	This is a shortcut for --branch-filter any. See --branch-filter for more infos.
+
+-j::
+--branch-filter::
+	Enable taken branch stack sampling. Each sample captures a series of consecutive
+	taken branches. The number of branches captured with each sample depends on the
+	underlying hardware, the type of branches of interest, and the executed code.
+	It is possible to select the types of branches captured by enabling filters.
+	For a full list of modifiers please see the perf record manpage.
+
+	The option requires at least one branch type among any, any_call, any_ret, ind_call, cond.
+	The privilege levels may be omitted, in which case, the privilege levels of the associated
+	event are applied to the branch filter. Both kernel (k) and hypervisor (hv) privilege
+	levels are subject to permissions.  When sampling on multiple events, branch stack sampling
+	is enabled for all the sampling events. The sampled branch type is the same for all events.
+	The various filters must be specified as a comma separated list: --branch-filter any_ret,u,k
+	Note that this feature may not be available on all processors.
 
 INTERACTIVE PROMPTING KEYS
 --------------------------
@@ -234,6 +262,7 @@ INTERACTIVE PROMPTING KEYS
 
 Pressing any unmapped key displays a menu, and prompts for input.
 
+include::callchain-overhead-calculation.txt[]
 
 SEE ALSO
 --------
diff --git a/kernel/tools/perf/Documentation/perf-trace.txt b/kernel/tools/perf/Documentation/perf-trace.txt
index ba03fd5d1..13293de88 100644
--- a/kernel/tools/perf/Documentation/perf-trace.txt
+++ b/kernel/tools/perf/Documentation/perf-trace.txt
@@ -35,7 +35,7 @@ OPTIONS
 
 -e::
 --expr::
-	List of events to show, currently only syscall names.
+	List of syscalls to show, currently only syscall names.
 	Prefixing with ! shows all syscalls but the ones specified.  You may
 	need to escape it.
 
@@ -62,7 +62,6 @@ OPTIONS
 --verbose=::
         Verbosity level.
 
--i::
 --no-inherit::
 	Child tasks do not inherit counters.
 
@@ -121,6 +120,11 @@ the thread executes on the designated CPUs. Default is to monitor all CPUs.
 --event::
 	Trace other events, see 'perf list' for a complete list.
 
+--proc-map-timeout::
+	When processing pre-existing threads /proc/XXX/mmap, it may take a long time,
+	because the file may be huge. A time out is needed in such cases.
+	This option sets the time out limit. The default value is 500 ms.
+
 PAGEFAULTS
 ----------
 
diff --git a/kernel/tools/perf/Documentation/perf.txt b/kernel/tools/perf/Documentation/perf.txt
index 2b1317763..864e37597 100644
--- a/kernel/tools/perf/Documentation/perf.txt
+++ b/kernel/tools/perf/Documentation/perf.txt
@@ -27,6 +27,14 @@ OPTIONS
 	Setup buildid cache directory. It has higher priority than
 	buildid.dir config file option.
 
+-v::
+--version::
+  Display perf version.
+
+-h::
+--help::
+  Run perf help command.
+
 DESCRIPTION
 -----------
 Performance counters for Linux are a new kernel-based subsystem