Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

5 files changed, 3607 insertions, 0 deletions

diff --git a/kernel/tools/lguest/.gitignore b/kernel/tools/lguest/.gitignore
new file mode 100644
index 000000000..115587fd5
--- /dev/null
+++ b/kernel/tools/lguest/.gitignore
@@ -0,0 +1 @@
+lguest
diff --git a/kernel/tools/lguest/Makefile b/kernel/tools/lguest/Makefile
new file mode 100644
index 000000000..a107b5e4d
--- /dev/null
+++ b/kernel/tools/lguest/Makefile
@@ -0,0 +1,13 @@
+# This creates the demonstration utility "lguest" which runs a Linux guest.
+CFLAGS:=-m32 -Wall -Wmissing-declarations -Wmissing-prototypes -O3 -U_FORTIFY_SOURCE -Iinclude
+
+all: lguest
+
+include/linux/virtio_types.h: ../../include/uapi/linux/virtio_types.h
+	mkdir -p include/linux 2>&1 || true
+	ln -sf ../../../../include/uapi/linux/virtio_types.h $@
+
+lguest: include/linux/virtio_types.h
+
+clean:
+	rm -f lguest
diff --git a/kernel/tools/lguest/extract b/kernel/tools/lguest/extract
new file mode 100644
index 000000000..7730bb6e4
--- /dev/null
+++ b/kernel/tools/lguest/extract
@@ -0,0 +1,58 @@
+#! /bin/sh
+
+set -e
+
+PREFIX=$1
+shift
+
+trap 'rm -r $TMPDIR' 0
+TMPDIR=`mktemp -d`
+
+exec 3>/dev/null
+for f; do
+    while IFS="
+" read -r LINE; do
+	case "$LINE" in
+	    *$PREFIX:[0-9]*:\**)
+		NUM=`echo "$LINE" | sed "s/.*$PREFIX:\([0-9]*\).*/\1/"`
+		if [ -f $TMPDIR/$NUM ]; then
+		    echo "$TMPDIR/$NUM already exits prior to $f"
+		    exit 1
+		fi
+		exec 3>>$TMPDIR/$NUM
+		echo $f | sed 's,\.\./,,g' > $TMPDIR/.$NUM
+		/bin/echo "$LINE" | sed -e "s/$PREFIX:[0-9]*//" -e "s/:\*/*/" >&3
+		;;
+	    *$PREFIX:[0-9]*)
+		NUM=`echo "$LINE" | sed "s/.*$PREFIX:\([0-9]*\).*/\1/"`
+		if [ -f $TMPDIR/$NUM ]; then
+		    echo "$TMPDIR/$NUM already exits prior to $f"
+		    exit 1
+		fi
+		exec 3>>$TMPDIR/$NUM
+		echo $f | sed 's,\.\./,,g' > $TMPDIR/.$NUM
+		/bin/echo "$LINE" | sed "s/$PREFIX:[0-9]*//" >&3
+		;;
+	    *:\**)
+		/bin/echo "$LINE" | sed -e "s/:\*/*/" -e "s,/\*\*/,," >&3
+		echo >&3
+		exec 3>/dev/null
+		;;
+	    *)
+		/bin/echo "$LINE" >&3
+		;;
+	esac
+    done < $f
+    echo >&3
+    exec 3>/dev/null
+done
+
+LASTFILE=""
+for f in $TMPDIR/*; do
+    if [ "$LASTFILE" != $(cat $TMPDIR/.$(basename $f) ) ]; then
+	LASTFILE=$(cat $TMPDIR/.$(basename $f) )
+	echo "[ $LASTFILE ]"
+    fi
+    cat $f
+done
+
diff --git a/kernel/tools/lguest/lguest.c b/kernel/tools/lguest/lguest.c
new file mode 100644
index 000000000..e44052483
--- /dev/null
+++ b/kernel/tools/lguest/lguest.c
@@ -0,0 +1,3410 @@
+/*P:100
+ * This is the Launcher code, a simple program which lays out the "physical"
+ * memory for the new Guest by mapping the kernel image and the virtual
+ * devices, then opens /dev/lguest to tell the kernel about the Guest and
+ * control it.
+:*/
+#define _LARGEFILE64_SOURCE
+#define _GNU_SOURCE
+#include <stdio.h>
+#include <string.h>
+#include <unistd.h>
+#include <err.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include <elf.h>
+#include <sys/mman.h>
+#include <sys/param.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/wait.h>
+#include <sys/eventfd.h>
+#include <fcntl.h>
+#include <stdbool.h>
+#include <errno.h>
+#include <ctype.h>
+#include <sys/socket.h>
+#include <sys/ioctl.h>
+#include <sys/time.h>
+#include <time.h>
+#include <netinet/in.h>
+#include <net/if.h>
+#include <linux/sockios.h>
+#include <linux/if_tun.h>
+#include <sys/uio.h>
+#include <termios.h>
+#include <getopt.h>
+#include <assert.h>
+#include <sched.h>
+#include <limits.h>
+#include <stddef.h>
+#include <signal.h>
+#include <pwd.h>
+#include <grp.h>
+#include <sys/user.h>
+#include <linux/pci_regs.h>
+
+#ifndef VIRTIO_F_ANY_LAYOUT
+#define VIRTIO_F_ANY_LAYOUT		27
+#endif
+
+/*L:110
+ * We can ignore the 43 include files we need for this program, but I do want
+ * to draw attention to the use of kernel-style types.
+ *
+ * As Linus said, "C is a Spartan language, and so should your naming be."  I
+ * like these abbreviations, so we define them here.  Note that u64 is always
+ * unsigned long long, which works on all Linux systems: this means that we can
+ * use %llu in printf for any u64.
+ */
+typedef unsigned long long u64;
+typedef uint32_t u32;
+typedef uint16_t u16;
+typedef uint8_t u8;
+/*:*/
+
+#define VIRTIO_CONFIG_NO_LEGACY
+#define VIRTIO_PCI_NO_LEGACY
+#define VIRTIO_BLK_NO_LEGACY
+#define VIRTIO_NET_NO_LEGACY
+
+/* Use in-kernel ones, which defines VIRTIO_F_VERSION_1 */
+#include "../../include/uapi/linux/virtio_config.h"
+#include "../../include/uapi/linux/virtio_net.h"
+#include "../../include/uapi/linux/virtio_blk.h"
+#include "../../include/uapi/linux/virtio_console.h"
+#include "../../include/uapi/linux/virtio_rng.h"
+#include <linux/virtio_ring.h>
+#include "../../include/uapi/linux/virtio_pci.h"
+#include <asm/bootparam.h>
+#include "../../include/linux/lguest_launcher.h"
+
+#define BRIDGE_PFX "bridge:"
+#ifndef SIOCBRADDIF
+#define SIOCBRADDIF	0x89a2		/* add interface to bridge      */
+#endif
+/* We can have up to 256 pages for devices. */
+#define DEVICE_PAGES 256
+/* This will occupy 3 pages: it must be a power of 2. */
+#define VIRTQUEUE_NUM 256
+
+/*L:120
+ * verbose is both a global flag and a macro.  The C preprocessor allows
+ * this, and although I wouldn't recommend it, it works quite nicely here.
+ */
+static bool verbose;
+#define verbose(args...) \
+	do { if (verbose) printf(args); } while(0)
+/*:*/
+
+/* The pointer to the start of guest memory. */
+static void *guest_base;
+/* The maximum guest physical address allowed, and maximum possible. */
+static unsigned long guest_limit, guest_max, guest_mmio;
+/* The /dev/lguest file descriptor. */
+static int lguest_fd;
+
+/* a per-cpu variable indicating whose vcpu is currently running */
+static unsigned int __thread cpu_id;
+
+/* 5 bit device number in the PCI_CONFIG_ADDR => 32 only */
+#define MAX_PCI_DEVICES 32
+
+/* This is our list of devices. */
+struct device_list {
+	/* Counter to assign interrupt numbers. */
+	unsigned int next_irq;
+
+	/* Counter to print out convenient device numbers. */
+	unsigned int device_num;
+
+	/* PCI devices. */
+	struct device *pci[MAX_PCI_DEVICES];
+};
+
+/* The list of Guest devices, based on command line arguments. */
+static struct device_list devices;
+
+struct virtio_pci_cfg_cap {
+	struct virtio_pci_cap cap;
+	u32 pci_cfg_data; /* Data for BAR access. */
+};
+
+struct virtio_pci_mmio {
+	struct virtio_pci_common_cfg cfg;
+	u16 notify;
+	u8 isr;
+	u8 padding;
+	/* Device-specific configuration follows this. */
+};
+
+/* This is the layout (little-endian) of the PCI config space. */
+struct pci_config {
+	u16 vendor_id, device_id;
+	u16 command, status;
+	u8 revid, prog_if, subclass, class;
+	u8 cacheline_size, lat_timer, header_type, bist;
+	u32 bar[6];
+	u32 cardbus_cis_ptr;
+	u16 subsystem_vendor_id, subsystem_device_id;
+	u32 expansion_rom_addr;
+	u8 capabilities, reserved1[3];
+	u32 reserved2;
+	u8 irq_line, irq_pin, min_grant, max_latency;
+
+	/* Now, this is the linked capability list. */
+	struct virtio_pci_cap common;
+	struct virtio_pci_notify_cap notify;
+	struct virtio_pci_cap isr;
+	struct virtio_pci_cap device;
+	struct virtio_pci_cfg_cap cfg_access;
+};
+
+/* The device structure describes a single device. */
+struct device {
+	/* The name of this device, for --verbose. */
+	const char *name;
+
+	/* Any queues attached to this device */
+	struct virtqueue *vq;
+
+	/* Is it operational */
+	bool running;
+
+	/* Has it written FEATURES_OK but not re-checked it? */
+	bool wrote_features_ok;
+
+	/* PCI configuration */
+	union {
+		struct pci_config config;
+		u32 config_words[sizeof(struct pci_config) / sizeof(u32)];
+	};
+
+	/* Features we offer, and those accepted. */
+	u64 features, features_accepted;
+
+	/* Device-specific config hangs off the end of this. */
+	struct virtio_pci_mmio *mmio;
+
+	/* PCI MMIO resources (all in BAR0) */
+	size_t mmio_size;
+	u32 mmio_addr;
+
+	/* Device-specific data. */
+	void *priv;
+};
+
+/* The virtqueue structure describes a queue attached to a device. */
+struct virtqueue {
+	struct virtqueue *next;
+
+	/* Which device owns me. */
+	struct device *dev;
+
+	/* Name for printing errors. */
+	const char *name;
+
+	/* The actual ring of buffers. */
+	struct vring vring;
+
+	/* The information about this virtqueue (we only use queue_size on) */
+	struct virtio_pci_common_cfg pci_config;
+
+	/* Last available index we saw. */
+	u16 last_avail_idx;
+
+	/* How many are used since we sent last irq? */
+	unsigned int pending_used;
+
+	/* Eventfd where Guest notifications arrive. */
+	int eventfd;
+
+	/* Function for the thread which is servicing this virtqueue. */
+	void (*service)(struct virtqueue *vq);
+	pid_t thread;
+};
+
+/* Remember the arguments to the program so we can "reboot" */
+static char **main_args;
+
+/* The original tty settings to restore on exit. */
+static struct termios orig_term;
+
+/*
+ * We have to be careful with barriers: our devices are all run in separate
+ * threads and so we need to make sure that changes visible to the Guest happen
+ * in precise order.
+ */
+#define wmb() __asm__ __volatile__("" : : : "memory")
+#define rmb() __asm__ __volatile__("lock; addl $0,0(%%esp)" : : : "memory")
+#define mb() __asm__ __volatile__("lock; addl $0,0(%%esp)" : : : "memory")
+
+/* Wrapper for the last available index.  Makes it easier to change. */
+#define lg_last_avail(vq)	((vq)->last_avail_idx)
+
+/*
+ * The virtio configuration space is defined to be little-endian.  x86 is
+ * little-endian too, but it's nice to be explicit so we have these helpers.
+ */
+#define cpu_to_le16(v16) (v16)
+#define cpu_to_le32(v32) (v32)
+#define cpu_to_le64(v64) (v64)
+#define le16_to_cpu(v16) (v16)
+#define le32_to_cpu(v32) (v32)
+#define le64_to_cpu(v64) (v64)
+
+/*
+ * A real device would ignore weird/non-compliant driver behaviour.  We
+ * stop and flag it, to help debugging Linux problems.
+ */
+#define bad_driver(d, fmt, ...) \
+	errx(1, "%s: bad driver: " fmt, (d)->name, ## __VA_ARGS__)
+#define bad_driver_vq(vq, fmt, ...)			       \
+	errx(1, "%s vq %s: bad driver: " fmt, (vq)->dev->name, \
+	     vq->name, ## __VA_ARGS__)
+
+/* Is this iovec empty? */
+static bool iov_empty(const struct iovec iov[], unsigned int num_iov)
+{
+	unsigned int i;
+
+	for (i = 0; i < num_iov; i++)
+		if (iov[i].iov_len)
+			return false;
+	return true;
+}
+
+/* Take len bytes from the front of this iovec. */
+static void iov_consume(struct device *d,
+			struct iovec iov[], unsigned num_iov,
+			void *dest, unsigned len)
+{
+	unsigned int i;
+
+	for (i = 0; i < num_iov; i++) {
+		unsigned int used;
+
+		used = iov[i].iov_len < len ? iov[i].iov_len : len;
+		if (dest) {
+			memcpy(dest, iov[i].iov_base, used);
+			dest += used;
+		}
+		iov[i].iov_base += used;
+		iov[i].iov_len -= used;
+		len -= used;
+	}
+	if (len != 0)
+		bad_driver(d, "iovec too short!");
+}
+
+/*L:100
+ * The Launcher code itself takes us out into userspace, that scary place where
+ * pointers run wild and free!  Unfortunately, like most userspace programs,
+ * it's quite boring (which is why everyone likes to hack on the kernel!).
+ * Perhaps if you make up an Lguest Drinking Game at this point, it will get
+ * you through this section.  Or, maybe not.
+ *
+ * The Launcher sets up a big chunk of memory to be the Guest's "physical"
+ * memory and stores it in "guest_base".  In other words, Guest physical ==
+ * Launcher virtual with an offset.
+ *
+ * This can be tough to get your head around, but usually it just means that we
+ * use these trivial conversion functions when the Guest gives us its
+ * "physical" addresses:
+ */
+static void *from_guest_phys(unsigned long addr)
+{
+	return guest_base + addr;
+}
+
+static unsigned long to_guest_phys(const void *addr)
+{
+	return (addr - guest_base);
+}
+
+/*L:130
+ * Loading the Kernel.
+ *
+ * We start with couple of simple helper routines.  open_or_die() avoids
+ * error-checking code cluttering the callers:
+ */
+static int open_or_die(const char *name, int flags)
+{
+	int fd = open(name, flags);
+	if (fd < 0)
+		err(1, "Failed to open %s", name);
+	return fd;
+}
+
+/* map_zeroed_pages() takes a number of pages. */
+static void *map_zeroed_pages(unsigned int num)
+{
+	int fd = open_or_die("/dev/zero", O_RDONLY);
+	void *addr;
+
+	/*
+	 * We use a private mapping (ie. if we write to the page, it will be
+	 * copied). We allocate an extra two pages PROT_NONE to act as guard
+	 * pages against read/write attempts that exceed allocated space.
+	 */
+	addr = mmap(NULL, getpagesize() * (num+2),
+		    PROT_NONE, MAP_PRIVATE, fd, 0);
+
+	if (addr == MAP_FAILED)
+		err(1, "Mmapping %u pages of /dev/zero", num);
+
+	if (mprotect(addr + getpagesize(), getpagesize() * num,
+		     PROT_READ|PROT_WRITE) == -1)
+		err(1, "mprotect rw %u pages failed", num);
+
+	/*
+	 * One neat mmap feature is that you can close the fd, and it
+	 * stays mapped.
+	 */
+	close(fd);
+
+	/* Return address after PROT_NONE page */
+	return addr + getpagesize();
+}
+
+/* Get some bytes which won't be mapped into the guest. */
+static unsigned long get_mmio_region(size_t size)
+{
+	unsigned long addr = guest_mmio;
+	size_t i;
+
+	if (!size)
+		return addr;
+
+	/* Size has to be a power of 2 (and multiple of 16) */
+	for (i = 1; i < size; i <<= 1);
+
+	guest_mmio += i;
+
+	return addr;
+}
+
+/*
+ * This routine is used to load the kernel or initrd.  It tries mmap, but if
+ * that fails (Plan 9's kernel file isn't nicely aligned on page boundaries),
+ * it falls back to reading the memory in.
+ */
+static void map_at(int fd, void *addr, unsigned long offset, unsigned long len)
+{
+	ssize_t r;
+
+	/*
+	 * We map writable even though for some segments are marked read-only.
+	 * The kernel really wants to be writable: it patches its own
+	 * instructions.
+	 *
+	 * MAP_PRIVATE means that the page won't be copied until a write is
+	 * done to it.  This allows us to share untouched memory between
+	 * Guests.
+	 */
+	if (mmap(addr, len, PROT_READ|PROT_WRITE,
+		 MAP_FIXED|MAP_PRIVATE, fd, offset) != MAP_FAILED)
+		return;
+
+	/* pread does a seek and a read in one shot: saves a few lines. */
+	r = pread(fd, addr, len, offset);
+	if (r != len)
+		err(1, "Reading offset %lu len %lu gave %zi", offset, len, r);
+}
+
+/*
+ * This routine takes an open vmlinux image, which is in ELF, and maps it into
+ * the Guest memory.  ELF = Embedded Linking Format, which is the format used
+ * by all modern binaries on Linux including the kernel.
+ *
+ * The ELF headers give *two* addresses: a physical address, and a virtual
+ * address.  We use the physical address; the Guest will map itself to the
+ * virtual address.
+ *
+ * We return the starting address.
+ */
+static unsigned long map_elf(int elf_fd, const Elf32_Ehdr *ehdr)
+{
+	Elf32_Phdr phdr[ehdr->e_phnum];
+	unsigned int i;
+
+	/*
+	 * Sanity checks on the main ELF header: an x86 executable with a
+	 * reasonable number of correctly-sized program headers.
+	 */
+	if (ehdr->e_type != ET_EXEC
+	    || ehdr->e_machine != EM_386
+	    || ehdr->e_phentsize != sizeof(Elf32_Phdr)
+	    || ehdr->e_phnum < 1 || ehdr->e_phnum > 65536U/sizeof(Elf32_Phdr))
+		errx(1, "Malformed elf header");
+
+	/*
+	 * An ELF executable contains an ELF header and a number of "program"
+	 * headers which indicate which parts ("segments") of the program to
+	 * load where.
+	 */
+
+	/* We read in all the program headers at once: */
+	if (lseek(elf_fd, ehdr->e_phoff, SEEK_SET) < 0)
+		err(1, "Seeking to program headers");
+	if (read(elf_fd, phdr, sizeof(phdr)) != sizeof(phdr))
+		err(1, "Reading program headers");
+
+	/*
+	 * Try all the headers: there are usually only three.  A read-only one,
+	 * a read-write one, and a "note" section which we don't load.
+	 */
+	for (i = 0; i < ehdr->e_phnum; i++) {
+		/* If this isn't a loadable segment, we ignore it */
+		if (phdr[i].p_type != PT_LOAD)
+			continue;
+
+		verbose("Section %i: size %i addr %p\n",
+			i, phdr[i].p_memsz, (void *)phdr[i].p_paddr);
+
+		/* We map this section of the file at its physical address. */
+		map_at(elf_fd, from_guest_phys(phdr[i].p_paddr),
+		       phdr[i].p_offset, phdr[i].p_filesz);
+	}
+
+	/* The entry point is given in the ELF header. */
+	return ehdr->e_entry;
+}
+
+/*L:150
+ * A bzImage, unlike an ELF file, is not meant to be loaded.  You're supposed
+ * to jump into it and it will unpack itself.  We used to have to perform some
+ * hairy magic because the unpacking code scared me.
+ *
+ * Fortunately, Jeremy Fitzhardinge convinced me it wasn't that hard and wrote
+ * a small patch to jump over the tricky bits in the Guest, so now we just read
+ * the funky header so we know where in the file to load, and away we go!
+ */
+static unsigned long load_bzimage(int fd)
+{
+	struct boot_params boot;
+	int r;
+	/* Modern bzImages get loaded at 1M. */
+	void *p = from_guest_phys(0x100000);
+
+	/*
+	 * Go back to the start of the file and read the header.  It should be
+	 * a Linux boot header (see Documentation/x86/boot.txt)
+	 */
+	lseek(fd, 0, SEEK_SET);
+	read(fd, &boot, sizeof(boot));
+
+	/* Inside the setup_hdr, we expect the magic "HdrS" */
+	if (memcmp(&boot.hdr.header, "HdrS", 4) != 0)
+		errx(1, "This doesn't look like a bzImage to me");
+
+	/* Skip over the extra sectors of the header. */
+	lseek(fd, (boot.hdr.setup_sects+1) * 512, SEEK_SET);
+
+	/* Now read everything into memory. in nice big chunks. */
+	while ((r = read(fd, p, 65536)) > 0)
+		p += r;
+
+	/* Finally, code32_start tells us where to enter the kernel. */
+	return boot.hdr.code32_start;
+}
+
+/*L:140
+ * Loading the kernel is easy when it's a "vmlinux", but most kernels
+ * come wrapped up in the self-decompressing "bzImage" format.  With a little
+ * work, we can load those, too.
+ */
+static unsigned long load_kernel(int fd)
+{
+	Elf32_Ehdr hdr;
+
+	/* Read in the first few bytes. */
+	if (read(fd, &hdr, sizeof(hdr)) != sizeof(hdr))
+		err(1, "Reading kernel");
+
+	/* If it's an ELF file, it starts with "\177ELF" */
+	if (memcmp(hdr.e_ident, ELFMAG, SELFMAG) == 0)
+		return map_elf(fd, &hdr);
+
+	/* Otherwise we assume it's a bzImage, and try to load it. */
+	return load_bzimage(fd);
+}
+
+/*
+ * This is a trivial little helper to align pages.  Andi Kleen hated it because
+ * it calls getpagesize() twice: "it's dumb code."
+ *
+ * Kernel guys get really het up about optimization, even when it's not
+ * necessary.  I leave this code as a reaction against that.
+ */
+static inline unsigned long page_align(unsigned long addr)
+{
+	/* Add upwards and truncate downwards. */
+	return ((addr + getpagesize()-1) & ~(getpagesize()-1));
+}
+
+/*L:180
+ * An "initial ram disk" is a disk image loaded into memory along with the
+ * kernel which the kernel can use to boot from without needing any drivers.
+ * Most distributions now use this as standard: the initrd contains the code to
+ * load the appropriate driver modules for the current machine.
+ *
+ * Importantly, James Morris works for RedHat, and Fedora uses initrds for its
+ * kernels.  He sent me this (and tells me when I break it).
+ */
+static unsigned long load_initrd(const char *name, unsigned long mem)
+{
+	int ifd;
+	struct stat st;
+	unsigned long len;
+
+	ifd = open_or_die(name, O_RDONLY);
+	/* fstat() is needed to get the file size. */
+	if (fstat(ifd, &st) < 0)
+		err(1, "fstat() on initrd '%s'", name);
+
+	/*
+	 * We map the initrd at the top of memory, but mmap wants it to be
+	 * page-aligned, so we round the size up for that.
+	 */
+	len = page_align(st.st_size);
+	map_at(ifd, from_guest_phys(mem - len), 0, st.st_size);
+	/*
+	 * Once a file is mapped, you can close the file descriptor.  It's a
+	 * little odd, but quite useful.
+	 */
+	close(ifd);
+	verbose("mapped initrd %s size=%lu @ %p\n", name, len, (void*)mem-len);
+
+	/* We return the initrd size. */
+	return len;
+}
+/*:*/
+
+/*
+ * Simple routine to roll all the commandline arguments together with spaces
+ * between them.
+ */
+static void concat(char *dst, char *args[])
+{
+	unsigned int i, len = 0;
+
+	for (i = 0; args[i]; i++) {
+		if (i) {
+			strcat(dst+len, " ");
+			len++;
+		}
+		strcpy(dst+len, args[i]);
+		len += strlen(args[i]);
+	}
+	/* In case it's empty. */
+	dst[len] = '\0';
+}
+
+/*L:185
+ * This is where we actually tell the kernel to initialize the Guest.  We
+ * saw the arguments it expects when we looked at initialize() in lguest_user.c:
+ * the base of Guest "physical" memory, the top physical page to allow and the
+ * entry point for the Guest.
+ */
+static void tell_kernel(unsigned long start)
+{
+	unsigned long args[] = { LHREQ_INITIALIZE,
+				 (unsigned long)guest_base,
+				 guest_limit / getpagesize(), start,
+				 (guest_mmio+getpagesize()-1) / getpagesize() };
+	verbose("Guest: %p - %p (%#lx, MMIO %#lx)\n",
+		guest_base, guest_base + guest_limit,
+		guest_limit, guest_mmio);
+	lguest_fd = open_or_die("/dev/lguest", O_RDWR);
+	if (write(lguest_fd, args, sizeof(args)) < 0)
+		err(1, "Writing to /dev/lguest");
+}
+/*:*/
+
+/*L:200
+ * Device Handling.
+ *
+ * When the Guest gives us a buffer, it sends an array of addresses and sizes.
+ * We need to make sure it's not trying to reach into the Launcher itself, so
+ * we have a convenient routine which checks it and exits with an error message
+ * if something funny is going on:
+ */
+static void *_check_pointer(struct device *d,
+			    unsigned long addr, unsigned int size,
+			    unsigned int line)
+{
+	/*
+	 * Check if the requested address and size exceeds the allocated memory,
+	 * or addr + size wraps around.
+	 */
+	if ((addr + size) > guest_limit || (addr + size) < addr)
+		bad_driver(d, "%s:%i: Invalid address %#lx",
+			   __FILE__, line, addr);
+	/*
+	 * We return a pointer for the caller's convenience, now we know it's
+	 * safe to use.
+	 */
+	return from_guest_phys(addr);
+}
+/* A macro which transparently hands the line number to the real function. */
+#define check_pointer(d,addr,size) _check_pointer(d, addr, size, __LINE__)
+
+/*
+ * Each buffer in the virtqueues is actually a chain of descriptors.  This
+ * function returns the next descriptor in the chain, or vq->vring.num if we're
+ * at the end.
+ */
+static unsigned next_desc(struct device *d, struct vring_desc *desc,
+			  unsigned int i, unsigned int max)
+{
+	unsigned int next;
+
+	/* If this descriptor says it doesn't chain, we're done. */
+	if (!(desc[i].flags & VRING_DESC_F_NEXT))
+		return max;
+
+	/* Check they're not leading us off end of descriptors. */
+	next = desc[i].next;
+	/* Make sure compiler knows to grab that: we don't want it changing! */
+	wmb();
+
+	if (next >= max)
+		bad_driver(d, "Desc next is %u", next);
+
+	return next;
+}
+
+/*
+ * This actually sends the interrupt for this virtqueue, if we've used a
+ * buffer.
+ */
+static void trigger_irq(struct virtqueue *vq)
+{
+	unsigned long buf[] = { LHREQ_IRQ, vq->dev->config.irq_line };
+
+	/* Don't inform them if nothing used. */
+	if (!vq->pending_used)
+		return;
+	vq->pending_used = 0;
+
+	/*
+	 * 2.4.7.1:
+	 *
+	 *  If the VIRTIO_F_EVENT_IDX feature bit is not negotiated:
+	 *    The driver MUST set flags to 0 or 1. 
+	 */
+	if (vq->vring.avail->flags > 1)
+		bad_driver_vq(vq, "avail->flags = %u\n", vq->vring.avail->flags);
+
+	/*
+	 * 2.4.7.2:
+	 *
+	 *  If the VIRTIO_F_EVENT_IDX feature bit is not negotiated:
+	 *
+	 *     - The device MUST ignore the used_event value.
+	 *     - After the device writes a descriptor index into the used ring:
+	 *         - If flags is 1, the device SHOULD NOT send an interrupt.
+	 *         - If flags is 0, the device MUST send an interrupt.
+	 */
+	if (vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT) {
+		return;
+	}
+
+	/*
+	 * 4.1.4.5.1:
+	 *
+	 *  If MSI-X capability is disabled, the device MUST set the Queue
+	 *  Interrupt bit in ISR status before sending a virtqueue notification
+	 *  to the driver.
+	 */
+	vq->dev->mmio->isr = 0x1;
+
+	/* Send the Guest an interrupt tell them we used something up. */
+	if (write(lguest_fd, buf, sizeof(buf)) != 0)
+		err(1, "Triggering irq %i", vq->dev->config.irq_line);
+}
+
+/*
+ * This looks in the virtqueue for the first available buffer, and converts
+ * it to an iovec for convenient access.  Since descriptors consist of some
+ * number of output then some number of input descriptors, it's actually two
+ * iovecs, but we pack them into one and note how many of each there were.
+ *
+ * This function waits if necessary, and returns the descriptor number found.
+ */
+static unsigned wait_for_vq_desc(struct virtqueue *vq,
+				 struct iovec iov[],
+				 unsigned int *out_num, unsigned int *in_num)
+{
+	unsigned int i, head, max;
+	struct vring_desc *desc;
+	u16 last_avail = lg_last_avail(vq);
+
+	/*
+	 * 2.4.7.1:
+	 *
+	 *   The driver MUST handle spurious interrupts from the device.
+	 *
+	 * That's why this is a while loop.
+	 */
+
+	/* There's nothing available? */
+	while (last_avail == vq->vring.avail->idx) {
+		u64 event;
+
+		/*
+		 * Since we're about to sleep, now is a good time to tell the
+		 * Guest about what we've used up to now.
+		 */
+		trigger_irq(vq);
+
+		/* OK, now we need to know about added descriptors. */
+		vq->vring.used->flags &= ~VRING_USED_F_NO_NOTIFY;
+
+		/*
+		 * They could have slipped one in as we were doing that: make
+		 * sure it's written, then check again.
+		 */
+		mb();
+		if (last_avail != vq->vring.avail->idx) {
+			vq->vring.used->flags |= VRING_USED_F_NO_NOTIFY;
+			break;
+		}
+
+		/* Nothing new?  Wait for eventfd to tell us they refilled. */
+		if (read(vq->eventfd, &event, sizeof(event)) != sizeof(event))
+			errx(1, "Event read failed?");
+
+		/* We don't need to be notified again. */
+		vq->vring.used->flags |= VRING_USED_F_NO_NOTIFY;
+	}
+
+	/* Check it isn't doing very strange things with descriptor numbers. */
+	if ((u16)(vq->vring.avail->idx - last_avail) > vq->vring.num)
+		bad_driver_vq(vq, "Guest moved used index from %u to %u",
+			      last_avail, vq->vring.avail->idx);
+
+	/* 
+	 * Make sure we read the descriptor number *after* we read the ring
+	 * update; don't let the cpu or compiler change the order.
+	 */
+	rmb();
+
+	/*
+	 * Grab the next descriptor number they're advertising, and increment
+	 * the index we've seen.
+	 */
+	head = vq->vring.avail->ring[last_avail % vq->vring.num];
+	lg_last_avail(vq)++;
+
+	/* If their number is silly, that's a fatal mistake. */
+	if (head >= vq->vring.num)
+		bad_driver_vq(vq, "Guest says index %u is available", head);
+
+	/* When we start there are none of either input nor output. */
+	*out_num = *in_num = 0;
+
+	max = vq->vring.num;
+	desc = vq->vring.desc;
+	i = head;
+
+	/*
+	 * We have to read the descriptor after we read the descriptor number,
+	 * but there's a data dependency there so the CPU shouldn't reorder
+	 * that: no rmb() required.
+	 */
+
+	do {
+		/*
+		 * If this is an indirect entry, then this buffer contains a
+		 * descriptor table which we handle as if it's any normal
+		 * descriptor chain.
+		 */
+		if (desc[i].flags & VRING_DESC_F_INDIRECT) {
+			/* 2.4.5.3.1:
+			 *
+			 *  The driver MUST NOT set the VIRTQ_DESC_F_INDIRECT
+			 *  flag unless the VIRTIO_F_INDIRECT_DESC feature was
+			 *  negotiated.
+			 */
+			if (!(vq->dev->features_accepted &
+			      (1<<VIRTIO_RING_F_INDIRECT_DESC)))
+				bad_driver_vq(vq, "vq indirect not negotiated");
+
+			/*
+			 * 2.4.5.3.1:
+			 *
+			 *   The driver MUST NOT set the VIRTQ_DESC_F_INDIRECT
+			 *   flag within an indirect descriptor (ie. only one
+			 *   table per descriptor).
+			 */
+			if (desc != vq->vring.desc)
+				bad_driver_vq(vq, "Indirect within indirect");
+
+			/*
+			 * Proposed update VIRTIO-134 spells this out:
+			 *
+			 *   A driver MUST NOT set both VIRTQ_DESC_F_INDIRECT
+			 *   and VIRTQ_DESC_F_NEXT in flags.
+			 */
+			if (desc[i].flags & VRING_DESC_F_NEXT)
+				bad_driver_vq(vq, "indirect and next together");
+
+			if (desc[i].len % sizeof(struct vring_desc))
+				bad_driver_vq(vq,
+					      "Invalid size for indirect table");
+			/*
+			 * 2.4.5.3.2:
+			 *
+			 *  The device MUST ignore the write-only flag
+			 *  (flags&VIRTQ_DESC_F_WRITE) in the descriptor that
+			 *  refers to an indirect table.
+			 *
+			 * We ignore it here: :)
+			 */
+
+			max = desc[i].len / sizeof(struct vring_desc);
+			desc = check_pointer(vq->dev, desc[i].addr, desc[i].len);
+			i = 0;
+
+			/* 2.4.5.3.1:
+			 *
+			 *  A driver MUST NOT create a descriptor chain longer
+			 *  than the Queue Size of the device.
+			 */
+			if (max > vq->pci_config.queue_size)
+				bad_driver_vq(vq,
+					      "indirect has too many entries");
+		}
+
+		/* Grab the first descriptor, and check it's OK. */
+		iov[*out_num + *in_num].iov_len = desc[i].len;
+		iov[*out_num + *in_num].iov_base
+			= check_pointer(vq->dev, desc[i].addr, desc[i].len);
+		/* If this is an input descriptor, increment that count. */
+		if (desc[i].flags & VRING_DESC_F_WRITE)
+			(*in_num)++;
+		else {
+			/*
+			 * If it's an output descriptor, they're all supposed
+			 * to come before any input descriptors.
+			 */
+			if (*in_num)
+				bad_driver_vq(vq,
+					      "Descriptor has out after in");
+			(*out_num)++;
+		}
+
+		/* If we've got too many, that implies a descriptor loop. */
+		if (*out_num + *in_num > max)
+			bad_driver_vq(vq, "Looped descriptor");
+	} while ((i = next_desc(vq->dev, desc, i, max)) != max);
+
+	return head;
+}
+
+/*
+ * After we've used one of their buffers, we tell the Guest about it.  Sometime
+ * later we'll want to send them an interrupt using trigger_irq(); note that
+ * wait_for_vq_desc() does that for us if it has to wait.
+ */
+static void add_used(struct virtqueue *vq, unsigned int head, int len)
+{
+	struct vring_used_elem *used;
+
+	/*
+	 * The virtqueue contains a ring of used buffers.  Get a pointer to the
+	 * next entry in that used ring.
+	 */
+	used = &vq->vring.used->ring[vq->vring.used->idx % vq->vring.num];
+	used->id = head;
+	used->len = len;
+	/* Make sure buffer is written before we update index. */
+	wmb();
+	vq->vring.used->idx++;
+	vq->pending_used++;
+}
+
+/* And here's the combo meal deal.  Supersize me! */
+static void add_used_and_trigger(struct virtqueue *vq, unsigned head, int len)
+{
+	add_used(vq, head, len);
+	trigger_irq(vq);
+}
+
+/*
+ * The Console
+ *
+ * We associate some data with the console for our exit hack.
+ */
+struct console_abort {
+	/* How many times have they hit ^C? */
+	int count;
+	/* When did they start? */
+	struct timeval start;
+};
+
+/* This is the routine which handles console input (ie. stdin). */
+static void console_input(struct virtqueue *vq)
+{
+	int len;
+	unsigned int head, in_num, out_num;
+	struct console_abort *abort = vq->dev->priv;
+	struct iovec iov[vq->vring.num];
+
+	/* Make sure there's a descriptor available. */
+	head = wait_for_vq_desc(vq, iov, &out_num, &in_num);
+	if (out_num)
+		bad_driver_vq(vq, "Output buffers in console in queue?");
+
+	/* Read into it.  This is where we usually wait. */
+	len = readv(STDIN_FILENO, iov, in_num);
+	if (len <= 0) {
+		/* Ran out of input? */
+		warnx("Failed to get console input, ignoring console.");
+		/*
+		 * For simplicity, dying threads kill the whole Launcher.  So
+		 * just nap here.
+		 */
+		for (;;)
+			pause();
+	}
+
+	/* Tell the Guest we used a buffer. */
+	add_used_and_trigger(vq, head, len);
+
+	/*
+	 * Three ^C within one second?  Exit.
+	 *
+	 * This is such a hack, but works surprisingly well.  Each ^C has to
+	 * be in a buffer by itself, so they can't be too fast.  But we check
+	 * that we get three within about a second, so they can't be too
+	 * slow.
+	 */
+	if (len != 1 || ((char *)iov[0].iov_base)[0] != 3) {
+		abort->count = 0;
+		return;
+	}
+
+	abort->count++;
+	if (abort->count == 1)
+		gettimeofday(&abort->start, NULL);
+	else if (abort->count == 3) {
+		struct timeval now;
+		gettimeofday(&now, NULL);
+		/* Kill all Launcher processes with SIGINT, like normal ^C */
+		if (now.tv_sec <= abort->start.tv_sec+1)
+			kill(0, SIGINT);
+		abort->count = 0;
+	}
+}
+
+/* This is the routine which handles console output (ie. stdout). */
+static void console_output(struct virtqueue *vq)
+{
+	unsigned int head, out, in;
+	struct iovec iov[vq->vring.num];
+
+	/* We usually wait in here, for the Guest to give us something. */
+	head = wait_for_vq_desc(vq, iov, &out, &in);
+	if (in)
+		bad_driver_vq(vq, "Input buffers in console output queue?");
+
+	/* writev can return a partial write, so we loop here. */
+	while (!iov_empty(iov, out)) {
+		int len = writev(STDOUT_FILENO, iov, out);
+		if (len <= 0) {
+			warn("Write to stdout gave %i (%d)", len, errno);
+			break;
+		}
+		iov_consume(vq->dev, iov, out, NULL, len);
+	}
+
+	/*
+	 * We're finished with that buffer: if we're going to sleep,
+	 * wait_for_vq_desc() will prod the Guest with an interrupt.
+	 */
+	add_used(vq, head, 0);
+}
+
+/*
+ * The Network
+ *
+ * Handling output for network is also simple: we get all the output buffers
+ * and write them to /dev/net/tun.
+ */
+struct net_info {
+	int tunfd;
+};
+
+static void net_output(struct virtqueue *vq)
+{
+	struct net_info *net_info = vq->dev->priv;
+	unsigned int head, out, in;
+	struct iovec iov[vq->vring.num];
+
+	/* We usually wait in here for the Guest to give us a packet. */
+	head = wait_for_vq_desc(vq, iov, &out, &in);
+	if (in)
+		bad_driver_vq(vq, "Input buffers in net output queue?");
+	/*
+	 * Send the whole thing through to /dev/net/tun.  It expects the exact
+	 * same format: what a coincidence!
+	 */
+	if (writev(net_info->tunfd, iov, out) < 0)
+		warnx("Write to tun failed (%d)?", errno);
+
+	/*
+	 * Done with that one; wait_for_vq_desc() will send the interrupt if
+	 * all packets are processed.
+	 */
+	add_used(vq, head, 0);
+}
+
+/*
+ * Handling network input is a bit trickier, because I've tried to optimize it.
+ *
+ * First we have a helper routine which tells is if from this file descriptor
+ * (ie. the /dev/net/tun device) will block:
+ */
+static bool will_block(int fd)
+{
+	fd_set fdset;
+	struct timeval zero = { 0, 0 };
+	FD_ZERO(&fdset);
+	FD_SET(fd, &fdset);
+	return select(fd+1, &fdset, NULL, NULL, &zero) != 1;
+}
+
+/*
+ * This handles packets coming in from the tun device to our Guest.  Like all
+ * service routines, it gets called again as soon as it returns, so you don't
+ * see a while(1) loop here.
+ */
+static void net_input(struct virtqueue *vq)
+{
+	int len;
+	unsigned int head, out, in;
+	struct iovec iov[vq->vring.num];
+	struct net_info *net_info = vq->dev->priv;
+
+	/*
+	 * Get a descriptor to write an incoming packet into.  This will also
+	 * send an interrupt if they're out of descriptors.
+	 */
+	head = wait_for_vq_desc(vq, iov, &out, &in);
+	if (out)
+		bad_driver_vq(vq, "Output buffers in net input queue?");
+
+	/*
+	 * If it looks like we'll block reading from the tun device, send them
+	 * an interrupt.
+	 */
+	if (vq->pending_used && will_block(net_info->tunfd))
+		trigger_irq(vq);
+
+	/*
+	 * Read in the packet.  This is where we normally wait (when there's no
+	 * incoming network traffic).
+	 */
+	len = readv(net_info->tunfd, iov, in);
+	if (len <= 0)
+		warn("Failed to read from tun (%d).", errno);
+
+	/*
+	 * Mark that packet buffer as used, but don't interrupt here.  We want
+	 * to wait until we've done as much work as we can.
+	 */
+	add_used(vq, head, len);
+}
+/*:*/
+
+/* This is the helper to create threads: run the service routine in a loop. */
+static int do_thread(void *_vq)
+{
+	struct virtqueue *vq = _vq;
+
+	for (;;)
+		vq->service(vq);
+	return 0;
+}
+
+/*
+ * When a child dies, we kill our entire process group with SIGTERM.  This
+ * also has the side effect that the shell restores the console for us!
+ */
+static void kill_launcher(int signal)
+{
+	kill(0, SIGTERM);
+}
+
+static void reset_vq_pci_config(struct virtqueue *vq)
+{
+	vq->pci_config.queue_size = VIRTQUEUE_NUM;
+	vq->pci_config.queue_enable = 0;
+}
+
+static void reset_device(struct device *dev)
+{
+	struct virtqueue *vq;
+
+	verbose("Resetting device %s\n", dev->name);
+
+	/* Clear any features they've acked. */
+	dev->features_accepted = 0;
+
+	/* We're going to be explicitly killing threads, so ignore them. */
+	signal(SIGCHLD, SIG_IGN);
+
+	/*
+	 * 4.1.4.3.1:
+	 *
+	 *   The device MUST present a 0 in queue_enable on reset. 
+	 *
+	 * This means we set it here, and reset the saved ones in every vq.
+	 */
+	dev->mmio->cfg.queue_enable = 0;
+
+	/* Get rid of the virtqueue threads */
+	for (vq = dev->vq; vq; vq = vq->next) {
+		vq->last_avail_idx = 0;
+		reset_vq_pci_config(vq);
+		if (vq->thread != (pid_t)-1) {
+			kill(vq->thread, SIGTERM);
+			waitpid(vq->thread, NULL, 0);
+			vq->thread = (pid_t)-1;
+		}
+	}
+	dev->running = false;
+	dev->wrote_features_ok = false;
+
+	/* Now we care if threads die. */
+	signal(SIGCHLD, (void *)kill_launcher);
+}
+
+static void cleanup_devices(void)
+{
+	unsigned int i;
+
+	for (i = 1; i < MAX_PCI_DEVICES; i++) {
+		struct device *d = devices.pci[i];
+		if (!d)
+			continue;
+		reset_device(d);
+	}
+
+	/* If we saved off the original terminal settings, restore them now. */
+	if (orig_term.c_lflag & (ISIG|ICANON|ECHO))
+		tcsetattr(STDIN_FILENO, TCSANOW, &orig_term);
+}
+
+/*L:217
+ * We do PCI.  This is mainly done to let us test the kernel virtio PCI
+ * code.
+ */
+
+/* Linux expects a PCI host bridge: ours is a dummy, and first on the bus. */
+static struct device pci_host_bridge;
+
+static void init_pci_host_bridge(void)
+{
+	pci_host_bridge.name = "PCI Host Bridge";
+	pci_host_bridge.config.class = 0x06; /* bridge */
+	pci_host_bridge.config.subclass = 0; /* host bridge */
+	devices.pci[0] = &pci_host_bridge;
+}
+
+/* The IO ports used to read the PCI config space. */
+#define PCI_CONFIG_ADDR 0xCF8
+#define PCI_CONFIG_DATA 0xCFC
+
+/*
+ * Not really portable, but does help readability: this is what the Guest
+ * writes to the PCI_CONFIG_ADDR IO port.
+ */
+union pci_config_addr {
+	struct {
+		unsigned mbz: 2;
+		unsigned offset: 6;
+		unsigned funcnum: 3;
+		unsigned devnum: 5;
+		unsigned busnum: 8;
+		unsigned reserved: 7;
+		unsigned enabled : 1;
+	} bits;
+	u32 val;
+};
+
+/*
+ * We cache what they wrote to the address port, so we know what they're
+ * talking about when they access the data port.
+ */
+static union pci_config_addr pci_config_addr;
+
+static struct device *find_pci_device(unsigned int index)
+{
+	return devices.pci[index];
+}
+
+/* PCI can do 1, 2 and 4 byte reads; we handle that here. */
+static void ioread(u16 off, u32 v, u32 mask, u32 *val)
+{
+	assert(off < 4);
+	assert(mask == 0xFF || mask == 0xFFFF || mask == 0xFFFFFFFF);
+	*val = (v >> (off * 8)) & mask;
+}
+
+/* PCI can do 1, 2 and 4 byte writes; we handle that here. */
+static void iowrite(u16 off, u32 v, u32 mask, u32 *dst)
+{
+	assert(off < 4);
+	assert(mask == 0xFF || mask == 0xFFFF || mask == 0xFFFFFFFF);
+	*dst &= ~(mask << (off * 8));
+	*dst |= (v & mask) << (off * 8);
+}
+
+/*
+ * Where PCI_CONFIG_DATA accesses depends on the previous write to
+ * PCI_CONFIG_ADDR.
+ */
+static struct device *dev_and_reg(u32 *reg)
+{
+	if (!pci_config_addr.bits.enabled)
+		return NULL;
+
+	if (pci_config_addr.bits.funcnum != 0)
+		return NULL;
+
+	if (pci_config_addr.bits.busnum != 0)
+		return NULL;
+
+	if (pci_config_addr.bits.offset * 4 >= sizeof(struct pci_config))
+		return NULL;
+
+	*reg = pci_config_addr.bits.offset;
+	return find_pci_device(pci_config_addr.bits.devnum);
+}
+
+/*
+ * We can get invalid combinations of values while they're writing, so we
+ * only fault if they try to write with some invalid bar/offset/length.
+ */
+static bool valid_bar_access(struct device *d,
+			     struct virtio_pci_cfg_cap *cfg_access)
+{
+	/* We only have 1 bar (BAR0) */
+	if (cfg_access->cap.bar != 0)
+		return false;
+
+	/* Check it's within BAR0. */
+	if (cfg_access->cap.offset >= d->mmio_size
+	    || cfg_access->cap.offset + cfg_access->cap.length > d->mmio_size)
+		return false;
+
+	/* Check length is 1, 2 or 4. */
+	if (cfg_access->cap.length != 1
+	    && cfg_access->cap.length != 2
+	    && cfg_access->cap.length != 4)
+		return false;
+
+	/*
+	 * 4.1.4.7.2:
+	 *
+	 *  The driver MUST NOT write a cap.offset which is not a multiple of
+	 *  cap.length (ie. all accesses MUST be aligned).
+	 */
+	if (cfg_access->cap.offset % cfg_access->cap.length != 0)
+		return false;
+
+	/* Return pointer into word in BAR0. */
+	return true;
+}
+
+/* Is this accessing the PCI config address port?. */
+static bool is_pci_addr_port(u16 port)
+{
+	return port >= PCI_CONFIG_ADDR && port < PCI_CONFIG_ADDR + 4;
+}
+
+static bool pci_addr_iowrite(u16 port, u32 mask, u32 val)
+{
+	iowrite(port - PCI_CONFIG_ADDR, val, mask,
+		&pci_config_addr.val);
+	verbose("PCI%s: %#x/%x: bus %u dev %u func %u reg %u\n",
+		pci_config_addr.bits.enabled ? "" : " DISABLED",
+		val, mask,
+		pci_config_addr.bits.busnum,
+		pci_config_addr.bits.devnum,
+		pci_config_addr.bits.funcnum,
+		pci_config_addr.bits.offset);
+	return true;
+}
+
+static void pci_addr_ioread(u16 port, u32 mask, u32 *val)
+{
+	ioread(port - PCI_CONFIG_ADDR, pci_config_addr.val, mask, val);
+}
+
+/* Is this accessing the PCI config data port?. */
+static bool is_pci_data_port(u16 port)
+{
+	return port >= PCI_CONFIG_DATA && port < PCI_CONFIG_DATA + 4;
+}
+
+static void emulate_mmio_write(struct device *d, u32 off, u32 val, u32 mask);
+
+static bool pci_data_iowrite(u16 port, u32 mask, u32 val)
+{
+	u32 reg, portoff;
+	struct device *d = dev_and_reg(&reg);
+
+	/* Complain if they don't belong to a device. */
+	if (!d)
+		return false;
+
+	/* They can do 1 byte writes, etc. */
+	portoff = port - PCI_CONFIG_DATA;
+
+	/*
+	 * PCI uses a weird way to determine the BAR size: the OS
+	 * writes all 1's, and sees which ones stick.
+	 */
+	if (&d->config_words[reg] == &d->config.bar[0]) {
+		int i;
+
+		iowrite(portoff, val, mask, &d->config.bar[0]);
+		for (i = 0; (1 << i) < d->mmio_size; i++)
+			d->config.bar[0] &= ~(1 << i);
+		return true;
+	} else if ((&d->config_words[reg] > &d->config.bar[0]
+		    && &d->config_words[reg] <= &d->config.bar[6])
+		   || &d->config_words[reg] == &d->config.expansion_rom_addr) {
+		/* Allow writing to any other BAR, or expansion ROM */
+		iowrite(portoff, val, mask, &d->config_words[reg]);
+		return true;
+		/* We let them overide latency timer and cacheline size */
+	} else if (&d->config_words[reg] == (void *)&d->config.cacheline_size) {
+		/* Only let them change the first two fields. */
+		if (mask == 0xFFFFFFFF)
+			mask = 0xFFFF;
+		iowrite(portoff, val, mask, &d->config_words[reg]);
+		return true;
+	} else if (&d->config_words[reg] == (void *)&d->config.command
+		   && mask == 0xFFFF) {
+		/* Ignore command writes. */
+		return true;
+	} else if (&d->config_words[reg]
+		   == (void *)&d->config.cfg_access.cap.bar
+		   || &d->config_words[reg]
+		   == &d->config.cfg_access.cap.length
+		   || &d->config_words[reg]
+		   == &d->config.cfg_access.cap.offset) {
+
+		/*
+		 * The VIRTIO_PCI_CAP_PCI_CFG capability
+		 * provides a backdoor to access the MMIO
+		 * regions without mapping them.  Weird, but
+		 * useful.
+		 */
+		iowrite(portoff, val, mask, &d->config_words[reg]);
+		return true;
+	} else if (&d->config_words[reg] == &d->config.cfg_access.pci_cfg_data) {
+		u32 write_mask;
+
+		/*
+		 * 4.1.4.7.1:
+		 *
+		 *  Upon detecting driver write access to pci_cfg_data, the
+		 *  device MUST execute a write access at offset cap.offset at
+		 *  BAR selected by cap.bar using the first cap.length bytes
+		 *  from pci_cfg_data.
+		 */
+
+		/* Must be bar 0 */
+		if (!valid_bar_access(d, &d->config.cfg_access))
+			return false;
+
+		iowrite(portoff, val, mask, &d->config.cfg_access.pci_cfg_data);
+
+		/*
+		 * Now emulate a write.  The mask we use is set by
+		 * len, *not* this write!
+		 */
+		write_mask = (1ULL<<(8*d->config.cfg_access.cap.length)) - 1;
+		verbose("Window writing %#x/%#x to bar %u, offset %u len %u\n",
+			d->config.cfg_access.pci_cfg_data, write_mask,
+			d->config.cfg_access.cap.bar,
+			d->config.cfg_access.cap.offset,
+			d->config.cfg_access.cap.length);
+
+		emulate_mmio_write(d, d->config.cfg_access.cap.offset,
+				   d->config.cfg_access.pci_cfg_data,
+				   write_mask);
+		return true;
+	}
+
+	/*
+	 * 4.1.4.1:
+	 *
+	 *  The driver MUST NOT write into any field of the capability
+	 *  structure, with the exception of those with cap_type
+	 *  VIRTIO_PCI_CAP_PCI_CFG...
+	 */
+	return false;
+}
+
+static u32 emulate_mmio_read(struct device *d, u32 off, u32 mask);
+
+static void pci_data_ioread(u16 port, u32 mask, u32 *val)
+{
+	u32 reg;
+	struct device *d = dev_and_reg(&reg);
+
+	if (!d)
+		return;
+
+	/* Read through the PCI MMIO access window is special */
+	if (&d->config_words[reg] == &d->config.cfg_access.pci_cfg_data) {
+		u32 read_mask;
+
+		/*
+		 * 4.1.4.7.1:
+		 *
+		 *  Upon detecting driver read access to pci_cfg_data, the
+		 *  device MUST execute a read access of length cap.length at
+		 *  offset cap.offset at BAR selected by cap.bar and store the
+		 *  first cap.length bytes in pci_cfg_data.
+		 */
+		/* Must be bar 0 */
+		if (!valid_bar_access(d, &d->config.cfg_access))
+			bad_driver(d,
+			     "Invalid cfg_access to bar%u, offset %u len %u",
+			     d->config.cfg_access.cap.bar,
+			     d->config.cfg_access.cap.offset,
+			     d->config.cfg_access.cap.length);
+
+		/*
+		 * Read into the window.  The mask we use is set by
+		 * len, *not* this read!
+		 */
+		read_mask = (1ULL<<(8*d->config.cfg_access.cap.length))-1;
+		d->config.cfg_access.pci_cfg_data
+			= emulate_mmio_read(d,
+					    d->config.cfg_access.cap.offset,
+					    read_mask);
+		verbose("Window read %#x/%#x from bar %u, offset %u len %u\n",
+			d->config.cfg_access.pci_cfg_data, read_mask,
+			d->config.cfg_access.cap.bar,
+			d->config.cfg_access.cap.offset,
+			d->config.cfg_access.cap.length);
+	}
+	ioread(port - PCI_CONFIG_DATA, d->config_words[reg], mask, val);
+}
+
+/*L:216
+ * This is where we emulate a handful of Guest instructions.  It's ugly
+ * and we used to do it in the kernel but it grew over time.
+ */
+
+/*
+ * We use the ptrace syscall's pt_regs struct to talk about registers
+ * to lguest: these macros convert the names to the offsets.
+ */
+#define getreg(name) getreg_off(offsetof(struct user_regs_struct, name))
+#define setreg(name, val) \
+	setreg_off(offsetof(struct user_regs_struct, name), (val))
+
+static u32 getreg_off(size_t offset)
+{
+	u32 r;
+	unsigned long args[] = { LHREQ_GETREG, offset };
+
+	if (pwrite(lguest_fd, args, sizeof(args), cpu_id) < 0)
+		err(1, "Getting register %u", offset);
+	if (pread(lguest_fd, &r, sizeof(r), cpu_id) != sizeof(r))
+		err(1, "Reading register %u", offset);
+
+	return r;
+}
+
+static void setreg_off(size_t offset, u32 val)
+{
+	unsigned long args[] = { LHREQ_SETREG, offset, val };
+
+	if (pwrite(lguest_fd, args, sizeof(args), cpu_id) < 0)
+		err(1, "Setting register %u", offset);
+}
+
+/* Get register by instruction encoding */
+static u32 getreg_num(unsigned regnum, u32 mask)
+{
+	/* 8 bit ops use regnums 4-7 for high parts of word */
+	if (mask == 0xFF && (regnum & 0x4))
+		return getreg_num(regnum & 0x3, 0xFFFF) >> 8;
+
+	switch (regnum) {
+	case 0: return getreg(eax) & mask;
+	case 1: return getreg(ecx) & mask;
+	case 2: return getreg(edx) & mask;
+	case 3: return getreg(ebx) & mask;
+	case 4: return getreg(esp) & mask;
+	case 5: return getreg(ebp) & mask;
+	case 6: return getreg(esi) & mask;
+	case 7: return getreg(edi) & mask;
+	}
+	abort();
+}
+
+/* Set register by instruction encoding */
+static void setreg_num(unsigned regnum, u32 val, u32 mask)
+{
+	/* Don't try to set bits out of range */
+	assert(~(val & ~mask));
+
+	/* 8 bit ops use regnums 4-7 for high parts of word */
+	if (mask == 0xFF && (regnum & 0x4)) {
+		/* Construct the 16 bits we want. */
+		val = (val << 8) | getreg_num(regnum & 0x3, 0xFF);
+		setreg_num(regnum & 0x3, val, 0xFFFF);
+		return;
+	}
+
+	switch (regnum) {
+	case 0: setreg(eax, val | (getreg(eax) & ~mask)); return;
+	case 1: setreg(ecx, val | (getreg(ecx) & ~mask)); return;
+	case 2: setreg(edx, val | (getreg(edx) & ~mask)); return;
+	case 3: setreg(ebx, val | (getreg(ebx) & ~mask)); return;
+	case 4: setreg(esp, val | (getreg(esp) & ~mask)); return;
+	case 5: setreg(ebp, val | (getreg(ebp) & ~mask)); return;
+	case 6: setreg(esi, val | (getreg(esi) & ~mask)); return;
+	case 7: setreg(edi, val | (getreg(edi) & ~mask)); return;
+	}
+	abort();
+}
+
+/* Get bytes of displacement appended to instruction, from r/m encoding */
+static u32 insn_displacement_len(u8 mod_reg_rm)
+{
+	/* Switch on the mod bits */
+	switch (mod_reg_rm >> 6) {
+	case 0:
+		/* If mod == 0, and r/m == 101, 16-bit displacement follows */
+		if ((mod_reg_rm & 0x7) == 0x5)
+			return 2;
+		/* Normally, mod == 0 means no literal displacement */
+		return 0;
+	case 1:
+		/* One byte displacement */
+		return 1;
+	case 2:
+		/* Four byte displacement */
+		return 4;
+	case 3:
+		/* Register mode */
+		return 0;
+	}
+	abort();
+}
+
+static void emulate_insn(const u8 insn[])
+{
+	unsigned long args[] = { LHREQ_TRAP, 13 };
+	unsigned int insnlen = 0, in = 0, small_operand = 0, byte_access;
+	unsigned int eax, port, mask;
+	/*
+	 * Default is to return all-ones on IO port reads, which traditionally
+	 * means "there's nothing there".
+	 */
+	u32 val = 0xFFFFFFFF;
+
+	/*
+	 * This must be the Guest kernel trying to do something, not userspace!
+	 * The bottom two bits of the CS segment register are the privilege
+	 * level.
+	 */
+	if ((getreg(xcs) & 3) != 0x1)
+		goto no_emulate;
+
+	/* Decoding x86 instructions is icky. */
+
+	/*
+	 * Around 2.6.33, the kernel started using an emulation for the
+	 * cmpxchg8b instruction in early boot on many configurations.  This
+	 * code isn't paravirtualized, and it tries to disable interrupts.
+	 * Ignore it, which will Mostly Work.
+	 */
+	if (insn[insnlen] == 0xfa) {
+		/* "cli", or Clear Interrupt Enable instruction.  Skip it. */
+		insnlen = 1;
+		goto skip_insn;
+	}
+
+	/*
+	 * 0x66 is an "operand prefix".  It means a 16, not 32 bit in/out.
+	 */
+	if (insn[insnlen] == 0x66) {
+		small_operand = 1;
+		/* The instruction is 1 byte so far, read the next byte. */
+		insnlen = 1;
+	}
+
+	/* If the lower bit isn't set, it's a single byte access */
+	byte_access = !(insn[insnlen] & 1);
+
+	/*
+	 * Now we can ignore the lower bit and decode the 4 opcodes
+	 * we need to emulate.
+	 */
+	switch (insn[insnlen] & 0xFE) {
+	case 0xE4: /* in     <next byte>,%al */
+		port = insn[insnlen+1];
+		insnlen += 2;
+		in = 1;
+		break;
+	case 0xEC: /* in     (%dx),%al */
+		port = getreg(edx) & 0xFFFF;
+		insnlen += 1;
+		in = 1;
+		break;
+	case 0xE6: /* out    %al,<next byte> */
+		port = insn[insnlen+1];
+		insnlen += 2;
+		break;
+	case 0xEE: /* out    %al,(%dx) */
+		port = getreg(edx) & 0xFFFF;
+		insnlen += 1;
+		break;
+	default:
+		/* OK, we don't know what this is, can't emulate. */
+		goto no_emulate;
+	}
+
+	/* Set a mask of the 1, 2 or 4 bytes, depending on size of IO */
+	if (byte_access)
+		mask = 0xFF;
+	else if (small_operand)
+		mask = 0xFFFF;
+	else
+		mask = 0xFFFFFFFF;
+
+	/*
+	 * If it was an "IN" instruction, they expect the result to be read
+	 * into %eax, so we change %eax.
+	 */
+	eax = getreg(eax);
+
+	if (in) {
+		/* This is the PS/2 keyboard status; 1 means ready for output */
+		if (port == 0x64)
+			val = 1;
+		else if (is_pci_addr_port(port))
+			pci_addr_ioread(port, mask, &val);
+		else if (is_pci_data_port(port))
+			pci_data_ioread(port, mask, &val);
+
+		/* Clear the bits we're about to read */
+		eax &= ~mask;
+		/* Copy bits in from val. */
+		eax |= val & mask;
+		/* Now update the register. */
+		setreg(eax, eax);
+	} else {
+		if (is_pci_addr_port(port)) {
+			if (!pci_addr_iowrite(port, mask, eax))
+				goto bad_io;
+		} else if (is_pci_data_port(port)) {
+			if (!pci_data_iowrite(port, mask, eax))
+				goto bad_io;
+		}
+		/* There are many other ports, eg. CMOS clock, serial
+		 * and parallel ports, so we ignore them all. */
+	}
+
+	verbose("IO %s of %x to %u: %#08x\n",
+		in ? "IN" : "OUT", mask, port, eax);
+skip_insn:
+	/* Finally, we've "done" the instruction, so move past it. */
+	setreg(eip, getreg(eip) + insnlen);
+	return;
+
+bad_io:
+	warnx("Attempt to %s port %u (%#x mask)",
+	      in ? "read from" : "write to", port, mask);
+
+no_emulate:
+	/* Inject trap into Guest. */
+	if (write(lguest_fd, args, sizeof(args)) < 0)
+		err(1, "Reinjecting trap 13 for fault at %#x", getreg(eip));
+}
+
+static struct device *find_mmio_region(unsigned long paddr, u32 *off)
+{
+	unsigned int i;
+
+	for (i = 1; i < MAX_PCI_DEVICES; i++) {
+		struct device *d = devices.pci[i];
+
+		if (!d)
+			continue;
+		if (paddr < d->mmio_addr)
+			continue;
+		if (paddr >= d->mmio_addr + d->mmio_size)
+			continue;
+		*off = paddr - d->mmio_addr;
+		return d;
+	}
+	return NULL;
+}
+
+/* FIXME: Use vq array. */
+static struct virtqueue *vq_by_num(struct device *d, u32 num)
+{
+	struct virtqueue *vq = d->vq;
+
+	while (num-- && vq)
+		vq = vq->next;
+
+	return vq;
+}
+
+static void save_vq_config(const struct virtio_pci_common_cfg *cfg,
+			   struct virtqueue *vq)
+{
+	vq->pci_config = *cfg;
+}
+
+static void restore_vq_config(struct virtio_pci_common_cfg *cfg,
+			      struct virtqueue *vq)
+{
+	/* Only restore the per-vq part */
+	size_t off = offsetof(struct virtio_pci_common_cfg, queue_size);
+
+	memcpy((void *)cfg + off, (void *)&vq->pci_config + off,
+	       sizeof(*cfg) - off);
+}
+
+/*
+ * 4.1.4.3.2:
+ *
+ *  The driver MUST configure the other virtqueue fields before
+ *  enabling the virtqueue with queue_enable.
+ *
+ * When they enable the virtqueue, we check that their setup is valid.
+ */
+static void check_virtqueue(struct device *d, struct virtqueue *vq)
+{
+	/* Because lguest is 32 bit, all the descriptor high bits must be 0 */
+	if (vq->pci_config.queue_desc_hi
+	    || vq->pci_config.queue_avail_hi
+	    || vq->pci_config.queue_used_hi)
+		bad_driver_vq(vq, "invalid 64-bit queue address");
+
+	/*
+	 * 2.4.1:
+	 *
+	 *  The driver MUST ensure that the physical address of the first byte
+	 *  of each virtqueue part is a multiple of the specified alignment
+	 *  value in the above table.
+	 */
+	if (vq->pci_config.queue_desc_lo % 16
+	    || vq->pci_config.queue_avail_lo % 2
+	    || vq->pci_config.queue_used_lo % 4)
+		bad_driver_vq(vq, "invalid alignment in queue addresses");
+
+	/* Initialize the virtqueue and check they're all in range. */
+	vq->vring.num = vq->pci_config.queue_size;
+	vq->vring.desc = check_pointer(vq->dev,
+				       vq->pci_config.queue_desc_lo,
+				       sizeof(*vq->vring.desc) * vq->vring.num);
+	vq->vring.avail = check_pointer(vq->dev,
+					vq->pci_config.queue_avail_lo,
+					sizeof(*vq->vring.avail)
+					+ (sizeof(vq->vring.avail->ring[0])
+					   * vq->vring.num));
+	vq->vring.used = check_pointer(vq->dev,
+				       vq->pci_config.queue_used_lo,
+				       sizeof(*vq->vring.used)
+				       + (sizeof(vq->vring.used->ring[0])
+					  * vq->vring.num));
+
+	/*
+	 * 2.4.9.1:
+	 *
+	 *   The driver MUST initialize flags in the used ring to 0
+	 *   when allocating the used ring.
+	 */
+	if (vq->vring.used->flags != 0)
+		bad_driver_vq(vq, "invalid initial used.flags %#x",
+			      vq->vring.used->flags);
+}
+
+static void start_virtqueue(struct virtqueue *vq)
+{
+	/*
+	 * Create stack for thread.  Since the stack grows upwards, we point
+	 * the stack pointer to the end of this region.
+	 */
+	char *stack = malloc(32768);
+
+	/* Create a zero-initialized eventfd. */
+	vq->eventfd = eventfd(0, 0);
+	if (vq->eventfd < 0)
+		err(1, "Creating eventfd");
+
+	/*
+	 * CLONE_VM: because it has to access the Guest memory, and SIGCHLD so
+	 * we get a signal if it dies.
+	 */
+	vq->thread = clone(do_thread, stack + 32768, CLONE_VM | SIGCHLD, vq);
+	if (vq->thread == (pid_t)-1)
+		err(1, "Creating clone");
+}
+
+static void start_virtqueues(struct device *d)
+{
+	struct virtqueue *vq;
+
+	for (vq = d->vq; vq; vq = vq->next) {
+		if (vq->pci_config.queue_enable)
+			start_virtqueue(vq);
+	}
+}
+
+static void emulate_mmio_write(struct device *d, u32 off, u32 val, u32 mask)
+{
+	struct virtqueue *vq;
+
+	switch (off) {
+	case offsetof(struct virtio_pci_mmio, cfg.device_feature_select):
+		/*
+		 * 4.1.4.3.1:
+		 *
+		 * The device MUST present the feature bits it is offering in
+		 * device_feature, starting at bit device_feature_select ∗ 32
+		 * for any device_feature_select written by the driver
+		 */
+		if (val == 0)
+			d->mmio->cfg.device_feature = d->features;
+		else if (val == 1)
+			d->mmio->cfg.device_feature = (d->features >> 32);
+		else
+			d->mmio->cfg.device_feature = 0;
+		goto feature_write_through32;
+	case offsetof(struct virtio_pci_mmio, cfg.guest_feature_select):
+		if (val > 1)
+			bad_driver(d, "Unexpected driver select %u", val);
+		goto feature_write_through32;
+	case offsetof(struct virtio_pci_mmio, cfg.guest_feature):
+		if (d->mmio->cfg.guest_feature_select == 0) {
+			d->features_accepted &= ~((u64)0xFFFFFFFF);
+			d->features_accepted |= val;
+		} else {
+			assert(d->mmio->cfg.guest_feature_select == 1);
+			d->features_accepted &= 0xFFFFFFFF;
+			d->features_accepted |= ((u64)val) << 32;
+		}
+		/*
+		 * 2.2.1:
+		 *
+		 *   The driver MUST NOT accept a feature which the device did
+		 *   not offer
+		 */
+		if (d->features_accepted & ~d->features)
+			bad_driver(d, "over-accepted features %#llx of %#llx",
+				   d->features_accepted, d->features);
+		goto feature_write_through32;
+	case offsetof(struct virtio_pci_mmio, cfg.device_status): {
+		u8 prev;
+
+		verbose("%s: device status -> %#x\n", d->name, val);
+		/*
+		 * 4.1.4.3.1:
+		 * 
+		 *  The device MUST reset when 0 is written to device_status,
+		 *  and present a 0 in device_status once that is done.
+		 */
+		if (val == 0) {
+			reset_device(d);
+			goto write_through8;
+		}
+
+		/* 2.1.1: The driver MUST NOT clear a device status bit. */
+		if (d->mmio->cfg.device_status & ~val)
+			bad_driver(d, "unset of device status bit %#x -> %#x",
+				   d->mmio->cfg.device_status, val);
+
+		/*
+		 * 2.1.2:
+		 *
+		 *  The device MUST NOT consume buffers or notify the driver
+		 *  before DRIVER_OK.
+		 */
+		if (val & VIRTIO_CONFIG_S_DRIVER_OK
+		    && !(d->mmio->cfg.device_status & VIRTIO_CONFIG_S_DRIVER_OK))
+			start_virtqueues(d);
+
+		/*
+		 * 3.1.1:
+		 *
+		 *   The driver MUST follow this sequence to initialize a device:
+		 *   - Reset the device.
+		 *   - Set the ACKNOWLEDGE status bit: the guest OS has
+                 *     notice the device.
+		 *   - Set the DRIVER status bit: the guest OS knows how
+                 *     to drive the device.
+		 *   - Read device feature bits, and write the subset
+		 *     of feature bits understood by the OS and driver
+		 *     to the device. During this step the driver MAY
+		 *     read (but MUST NOT write) the device-specific
+		 *     configuration fields to check that it can
+		 *     support the device before accepting it.
+		 *   - Set the FEATURES_OK status bit.  The driver
+		 *     MUST not accept new feature bits after this
+		 *     step.
+		 *   - Re-read device status to ensure the FEATURES_OK
+		 *     bit is still set: otherwise, the device does
+		 *     not support our subset of features and the
+		 *     device is unusable.
+		 *   - Perform device-specific setup, including
+		 *     discovery of virtqueues for the device,
+		 *     optional per-bus setup, reading and possibly
+		 *     writing the device’s virtio configuration
+		 *     space, and population of virtqueues.
+		 *   - Set the DRIVER_OK status bit. At this point the
+                 *     device is “live”.
+		 */
+		prev = 0;
+		switch (val & ~d->mmio->cfg.device_status) {
+		case VIRTIO_CONFIG_S_DRIVER_OK:
+			prev |= VIRTIO_CONFIG_S_FEATURES_OK; /* fall thru */
+		case VIRTIO_CONFIG_S_FEATURES_OK:
+			prev |= VIRTIO_CONFIG_S_DRIVER; /* fall thru */
+		case VIRTIO_CONFIG_S_DRIVER:
+			prev |= VIRTIO_CONFIG_S_ACKNOWLEDGE; /* fall thru */
+		case VIRTIO_CONFIG_S_ACKNOWLEDGE:
+			break;
+		default:
+			bad_driver(d, "unknown device status bit %#x -> %#x",
+				   d->mmio->cfg.device_status, val);
+		}
+		if (d->mmio->cfg.device_status != prev)
+			bad_driver(d, "unexpected status transition %#x -> %#x",
+				   d->mmio->cfg.device_status, val);
+
+		/* If they just wrote FEATURES_OK, we make sure they read */
+		switch (val & ~d->mmio->cfg.device_status) {
+		case VIRTIO_CONFIG_S_FEATURES_OK:
+			d->wrote_features_ok = true;
+			break;
+		case VIRTIO_CONFIG_S_DRIVER_OK:
+			if (d->wrote_features_ok)
+				bad_driver(d, "did not re-read FEATURES_OK");
+			break;
+		}
+		goto write_through8;
+	}
+	case offsetof(struct virtio_pci_mmio, cfg.queue_select):
+		vq = vq_by_num(d, val);
+		/*
+		 * 4.1.4.3.1:
+		 *
+		 *  The device MUST present a 0 in queue_size if the virtqueue
+		 *  corresponding to the current queue_select is unavailable.
+		 */
+		if (!vq) {
+			d->mmio->cfg.queue_size = 0;
+			goto write_through16;
+		}
+		/* Save registers for old vq, if it was a valid vq */
+		if (d->mmio->cfg.queue_size)
+			save_vq_config(&d->mmio->cfg,
+				       vq_by_num(d, d->mmio->cfg.queue_select));
+		/* Restore the registers for the queue they asked for */
+		restore_vq_config(&d->mmio->cfg, vq);
+		goto write_through16;
+	case offsetof(struct virtio_pci_mmio, cfg.queue_size):
+		/*
+		 * 4.1.4.3.2:
+		 *
+		 *  The driver MUST NOT write a value which is not a power of 2
+		 *  to queue_size.
+		 */
+		if (val & (val-1))
+			bad_driver(d, "invalid queue size %u", val);
+		if (d->mmio->cfg.queue_enable)
+			bad_driver(d, "changing queue size on live device");
+		goto write_through16;
+	case offsetof(struct virtio_pci_mmio, cfg.queue_msix_vector):
+		bad_driver(d, "attempt to set MSIX vector to %u", val);
+	case offsetof(struct virtio_pci_mmio, cfg.queue_enable): {
+		struct virtqueue *vq = vq_by_num(d, d->mmio->cfg.queue_select);
+
+		/*
+		 * 4.1.4.3.2:
+		 *
+		 *  The driver MUST NOT write a 0 to queue_enable.
+		 */
+		if (val != 1)
+			bad_driver(d, "setting queue_enable to %u", val);
+
+		/*
+		 * 3.1.1:
+		 *
+		 *  7. Perform device-specific setup, including discovery of
+		 *     virtqueues for the device, optional per-bus setup,
+		 *     reading and possibly writing the device’s virtio
+		 *     configuration space, and population of virtqueues.
+		 *  8. Set the DRIVER_OK status bit.
+		 *
+		 * All our devices require all virtqueues to be enabled, so
+		 * they should have done that before setting DRIVER_OK.
+		 */
+		if (d->mmio->cfg.device_status & VIRTIO_CONFIG_S_DRIVER_OK)
+			bad_driver(d, "enabling vq after DRIVER_OK");
+
+		d->mmio->cfg.queue_enable = val;
+		save_vq_config(&d->mmio->cfg, vq);
+		check_virtqueue(d, vq);
+		goto write_through16;
+	}
+	case offsetof(struct virtio_pci_mmio, cfg.queue_notify_off):
+		bad_driver(d, "attempt to write to queue_notify_off");
+	case offsetof(struct virtio_pci_mmio, cfg.queue_desc_lo):
+	case offsetof(struct virtio_pci_mmio, cfg.queue_desc_hi):
+	case offsetof(struct virtio_pci_mmio, cfg.queue_avail_lo):
+	case offsetof(struct virtio_pci_mmio, cfg.queue_avail_hi):
+	case offsetof(struct virtio_pci_mmio, cfg.queue_used_lo):
+	case offsetof(struct virtio_pci_mmio, cfg.queue_used_hi):
+		/*
+		 * 4.1.4.3.2:
+		 *
+		 *  The driver MUST configure the other virtqueue fields before
+		 *  enabling the virtqueue with queue_enable.
+		 */
+		if (d->mmio->cfg.queue_enable)
+			bad_driver(d, "changing queue on live device");
+
+		/*
+		 * 3.1.1:
+		 *
+		 *  The driver MUST follow this sequence to initialize a device:
+		 *...
+		 *  5. Set the FEATURES_OK status bit. The driver MUST not
+		 *  accept new feature bits after this step.
+		 */
+		if (!(d->mmio->cfg.device_status & VIRTIO_CONFIG_S_FEATURES_OK))
+			bad_driver(d, "setting up vq before FEATURES_OK");
+
+		/*
+		 *  6. Re-read device status to ensure the FEATURES_OK bit is
+		 *     still set...
+		 */
+		if (d->wrote_features_ok)
+			bad_driver(d, "didn't re-read FEATURES_OK before setup");
+
+		goto write_through32;
+	case offsetof(struct virtio_pci_mmio, notify):
+		vq = vq_by_num(d, val);
+		if (!vq)
+			bad_driver(d, "Invalid vq notification on %u", val);
+		/* Notify the process handling this vq by adding 1 to eventfd */
+		write(vq->eventfd, "\1\0\0\0\0\0\0\0", 8);
+		goto write_through16;
+	case offsetof(struct virtio_pci_mmio, isr):
+		bad_driver(d, "Unexpected write to isr");
+	/* Weird corner case: write to emerg_wr of console */
+	case sizeof(struct virtio_pci_mmio)
+		+ offsetof(struct virtio_console_config, emerg_wr):
+		if (strcmp(d->name, "console") == 0) {
+			char c = val;
+			write(STDOUT_FILENO, &c, 1);
+			goto write_through32;
+		}
+		/* Fall through... */
+	default:
+		/*
+		 * 4.1.4.3.2:
+		 *
+		 *   The driver MUST NOT write to device_feature, num_queues,
+		 *   config_generation or queue_notify_off.
+		 */
+		bad_driver(d, "Unexpected write to offset %u", off);
+	}
+
+feature_write_through32:
+	/*
+	 * 3.1.1:
+	 *
+	 *   The driver MUST follow this sequence to initialize a device:
+	 *...
+	 *   - Set the DRIVER status bit: the guest OS knows how
+	 *     to drive the device.
+	 *   - Read device feature bits, and write the subset
+	 *     of feature bits understood by the OS and driver
+	 *     to the device.
+	 *...
+	 *   - Set the FEATURES_OK status bit. The driver MUST not
+	 *     accept new feature bits after this step.
+	 */
+	if (!(d->mmio->cfg.device_status & VIRTIO_CONFIG_S_DRIVER))
+		bad_driver(d, "feature write before VIRTIO_CONFIG_S_DRIVER");
+	if (d->mmio->cfg.device_status & VIRTIO_CONFIG_S_FEATURES_OK)
+		bad_driver(d, "feature write after VIRTIO_CONFIG_S_FEATURES_OK");
+
+	/*
+	 * 4.1.3.1:
+	 *
+	 *  The driver MUST access each field using the “natural” access
+	 *  method, i.e. 32-bit accesses for 32-bit fields, 16-bit accesses for
+	 *  16-bit fields and 8-bit accesses for 8-bit fields.
+	 */
+write_through32:
+	if (mask != 0xFFFFFFFF) {
+		bad_driver(d, "non-32-bit write to offset %u (%#x)",
+			   off, getreg(eip));
+		return;
+	}
+	memcpy((char *)d->mmio + off, &val, 4);
+	return;
+
+write_through16:
+	if (mask != 0xFFFF)
+		bad_driver(d, "non-16-bit write to offset %u (%#x)",
+			   off, getreg(eip));
+	memcpy((char *)d->mmio + off, &val, 2);
+	return;
+
+write_through8:
+	if (mask != 0xFF)
+		bad_driver(d, "non-8-bit write to offset %u (%#x)",
+			   off, getreg(eip));
+	memcpy((char *)d->mmio + off, &val, 1);
+	return;
+}
+
+static u32 emulate_mmio_read(struct device *d, u32 off, u32 mask)
+{
+	u8 isr;
+	u32 val = 0;
+
+	switch (off) {
+	case offsetof(struct virtio_pci_mmio, cfg.device_feature_select):
+	case offsetof(struct virtio_pci_mmio, cfg.device_feature):
+	case offsetof(struct virtio_pci_mmio, cfg.guest_feature_select):
+	case offsetof(struct virtio_pci_mmio, cfg.guest_feature):
+		/*
+		 * 3.1.1:
+		 *
+		 *   The driver MUST follow this sequence to initialize a device:
+		 *...
+		 *   - Set the DRIVER status bit: the guest OS knows how
+		 *     to drive the device.
+		 *   - Read device feature bits, and write the subset
+		 *     of feature bits understood by the OS and driver
+		 *     to the device.
+		 */
+		if (!(d->mmio->cfg.device_status & VIRTIO_CONFIG_S_DRIVER))
+			bad_driver(d,
+				   "feature read before VIRTIO_CONFIG_S_DRIVER");
+		goto read_through32;
+	case offsetof(struct virtio_pci_mmio, cfg.msix_config):
+		bad_driver(d, "read of msix_config");
+	case offsetof(struct virtio_pci_mmio, cfg.num_queues):
+		goto read_through16;
+	case offsetof(struct virtio_pci_mmio, cfg.device_status):
+		/* As they did read, any write of FEATURES_OK is now fine. */
+		d->wrote_features_ok = false;
+		goto read_through8;
+	case offsetof(struct virtio_pci_mmio, cfg.config_generation):
+		/*
+		 * 4.1.4.3.1:
+		 *
+		 *  The device MUST present a changed config_generation after
+		 *  the driver has read a device-specific configuration value
+		 *  which has changed since any part of the device-specific
+		 *  configuration was last read.
+		 *
+		 * This is simple: none of our devices change config, so this
+		 * is always 0.
+		 */
+		goto read_through8;
+	case offsetof(struct virtio_pci_mmio, notify):
+		/*
+		 * 3.1.1:
+		 *
+		 *   The driver MUST NOT notify the device before setting
+		 *   DRIVER_OK.
+		 */
+		if (!(d->mmio->cfg.device_status & VIRTIO_CONFIG_S_DRIVER_OK))
+			bad_driver(d, "notify before VIRTIO_CONFIG_S_DRIVER_OK");
+		goto read_through16;
+	case offsetof(struct virtio_pci_mmio, isr):
+		if (mask != 0xFF)
+			bad_driver(d, "non-8-bit read from offset %u (%#x)",
+				   off, getreg(eip));
+		isr = d->mmio->isr;
+		/*
+		 * 4.1.4.5.1:
+		 *
+		 *  The device MUST reset ISR status to 0 on driver read. 
+		 */
+		d->mmio->isr = 0;
+		return isr;
+	case offsetof(struct virtio_pci_mmio, padding):
+		bad_driver(d, "read from padding (%#x)", getreg(eip));
+	default:
+		/* Read from device config space, beware unaligned overflow */
+		if (off > d->mmio_size - 4)
+			bad_driver(d, "read past end (%#x)", getreg(eip));
+
+		/*
+		 * 3.1.1:
+		 *  The driver MUST follow this sequence to initialize a device:
+		 *...
+		 *  3. Set the DRIVER status bit: the guest OS knows how to
+		 *  drive the device.
+		 *  4. Read device feature bits, and write the subset of
+		 *  feature bits understood by the OS and driver to the
+		 *  device. During this step the driver MAY read (but MUST NOT
+		 *  write) the device-specific configuration fields to check
+		 *  that it can support the device before accepting it.
+		 */
+		if (!(d->mmio->cfg.device_status & VIRTIO_CONFIG_S_DRIVER))
+			bad_driver(d,
+				   "config read before VIRTIO_CONFIG_S_DRIVER");
+
+		if (mask == 0xFFFFFFFF)
+			goto read_through32;
+		else if (mask == 0xFFFF)
+			goto read_through16;
+		else
+			goto read_through8;
+	}
+
+	/*
+	 * 4.1.3.1:
+	 *
+	 *  The driver MUST access each field using the “natural” access
+	 *  method, i.e. 32-bit accesses for 32-bit fields, 16-bit accesses for
+	 *  16-bit fields and 8-bit accesses for 8-bit fields.
+	 */
+read_through32:
+	if (mask != 0xFFFFFFFF)
+		bad_driver(d, "non-32-bit read to offset %u (%#x)",
+			   off, getreg(eip));
+	memcpy(&val, (char *)d->mmio + off, 4);
+	return val;
+
+read_through16:
+	if (mask != 0xFFFF)
+		bad_driver(d, "non-16-bit read to offset %u (%#x)",
+			   off, getreg(eip));
+	memcpy(&val, (char *)d->mmio + off, 2);
+	return val;
+
+read_through8:
+	if (mask != 0xFF)
+		bad_driver(d, "non-8-bit read to offset %u (%#x)",
+			   off, getreg(eip));
+	memcpy(&val, (char *)d->mmio + off, 1);
+	return val;
+}
+
+static void emulate_mmio(unsigned long paddr, const u8 *insn)
+{
+	u32 val, off, mask = 0xFFFFFFFF, insnlen = 0;
+	struct device *d = find_mmio_region(paddr, &off);
+	unsigned long args[] = { LHREQ_TRAP, 14 };
+
+	if (!d) {
+		warnx("MMIO touching %#08lx (not a device)", paddr);
+		goto reinject;
+	}
+
+	/* Prefix makes it a 16 bit op */
+	if (insn[0] == 0x66) {
+		mask = 0xFFFF;
+		insnlen++;
+	}
+
+	/* iowrite */
+	if (insn[insnlen] == 0x89) {
+		/* Next byte is r/m byte: bits 3-5 are register. */
+		val = getreg_num((insn[insnlen+1] >> 3) & 0x7, mask);
+		emulate_mmio_write(d, off, val, mask);
+		insnlen += 2 + insn_displacement_len(insn[insnlen+1]);
+	} else if (insn[insnlen] == 0x8b) { /* ioread */
+		/* Next byte is r/m byte: bits 3-5 are register. */
+		val = emulate_mmio_read(d, off, mask);
+		setreg_num((insn[insnlen+1] >> 3) & 0x7, val, mask);
+		insnlen += 2 + insn_displacement_len(insn[insnlen+1]);
+	} else if (insn[0] == 0x88) { /* 8-bit iowrite */
+		mask = 0xff;
+		/* Next byte is r/m byte: bits 3-5 are register. */
+		val = getreg_num((insn[1] >> 3) & 0x7, mask);
+		emulate_mmio_write(d, off, val, mask);
+		insnlen = 2 + insn_displacement_len(insn[1]);
+	} else if (insn[0] == 0x8a) { /* 8-bit ioread */
+		mask = 0xff;
+		val = emulate_mmio_read(d, off, mask);
+		setreg_num((insn[1] >> 3) & 0x7, val, mask);
+		insnlen = 2 + insn_displacement_len(insn[1]);
+	} else {
+		warnx("Unknown MMIO instruction touching %#08lx:"
+		     " %02x %02x %02x %02x at %u",
+		     paddr, insn[0], insn[1], insn[2], insn[3], getreg(eip));
+	reinject:
+		/* Inject trap into Guest. */
+		if (write(lguest_fd, args, sizeof(args)) < 0)
+			err(1, "Reinjecting trap 14 for fault at %#x",
+			    getreg(eip));
+		return;
+	}
+
+	/* Finally, we've "done" the instruction, so move past it. */
+	setreg(eip, getreg(eip) + insnlen);
+}
+
+/*L:190
+ * Device Setup
+ *
+ * All devices need a descriptor so the Guest knows it exists, and a "struct
+ * device" so the Launcher can keep track of it.  We have common helper
+ * routines to allocate and manage them.
+ */
+static void add_pci_virtqueue(struct device *dev,
+			      void (*service)(struct virtqueue *),
+			      const char *name)
+{
+	struct virtqueue **i, *vq = malloc(sizeof(*vq));
+
+	/* Initialize the virtqueue */
+	vq->next = NULL;
+	vq->last_avail_idx = 0;
+	vq->dev = dev;
+	vq->name = name;
+
+	/*
+	 * This is the routine the service thread will run, and its Process ID
+	 * once it's running.
+	 */
+	vq->service = service;
+	vq->thread = (pid_t)-1;
+
+	/* Initialize the configuration. */
+	reset_vq_pci_config(vq);
+	vq->pci_config.queue_notify_off = 0;
+
+	/* Add one to the number of queues */
+	vq->dev->mmio->cfg.num_queues++;
+
+	/*
+	 * Add to tail of list, so dev->vq is first vq, dev->vq->next is
+	 * second.
+	 */
+	for (i = &dev->vq; *i; i = &(*i)->next);
+	*i = vq;
+}
+
+/* The Guest accesses the feature bits via the PCI common config MMIO region */
+static void add_pci_feature(struct device *dev, unsigned bit)
+{
+	dev->features |= (1ULL << bit);
+}
+
+/* For devices with no config. */
+static void no_device_config(struct device *dev)
+{
+	dev->mmio_addr = get_mmio_region(dev->mmio_size);
+
+	dev->config.bar[0] = dev->mmio_addr;
+	/* Bottom 4 bits must be zero */
+	assert(~(dev->config.bar[0] & 0xF));
+}
+
+/* This puts the device config into BAR0 */
+static void set_device_config(struct device *dev, const void *conf, size_t len)
+{
+	/* Set up BAR 0 */
+	dev->mmio_size += len;
+	dev->mmio = realloc(dev->mmio, dev->mmio_size);
+	memcpy(dev->mmio + 1, conf, len);
+
+	/*
+	 * 4.1.4.6:
+	 *
+	 *  The device MUST present at least one VIRTIO_PCI_CAP_DEVICE_CFG
+	 *  capability for any device type which has a device-specific
+	 *  configuration.
+	 */
+	/* Hook up device cfg */
+	dev->config.cfg_access.cap.cap_next
+		= offsetof(struct pci_config, device);
+
+	/*
+	 * 4.1.4.6.1:
+	 *
+	 *  The offset for the device-specific configuration MUST be 4-byte
+	 *  aligned.
+	 */
+	assert(dev->config.cfg_access.cap.cap_next % 4 == 0);
+
+	/* Fix up device cfg field length. */
+	dev->config.device.length = len;
+
+	/* The rest is the same as the no-config case */
+	no_device_config(dev);
+}
+
+static void init_cap(struct virtio_pci_cap *cap, size_t caplen, int type,
+		     size_t bar_offset, size_t bar_bytes, u8 next)
+{
+	cap->cap_vndr = PCI_CAP_ID_VNDR;
+	cap->cap_next = next;
+	cap->cap_len = caplen;
+	cap->cfg_type = type;
+	cap->bar = 0;
+	memset(cap->padding, 0, sizeof(cap->padding));
+	cap->offset = bar_offset;
+	cap->length = bar_bytes;
+}
+
+/*
+ * This sets up the pci_config structure, as defined in the virtio 1.0
+ * standard (and PCI standard).
+ */
+static void init_pci_config(struct pci_config *pci, u16 type,
+			    u8 class, u8 subclass)
+{
+	size_t bar_offset, bar_len;
+
+	/*
+	 * 4.1.4.4.1:
+	 *
+	 *  The device MUST either present notify_off_multiplier as an even
+	 *  power of 2, or present notify_off_multiplier as 0.
+	 *
+	 * 2.1.2:
+	 *
+	 *   The device MUST initialize device status to 0 upon reset. 
+	 */
+	memset(pci, 0, sizeof(*pci));
+
+	/* 4.1.2.1: Devices MUST have the PCI Vendor ID 0x1AF4 */
+	pci->vendor_id = 0x1AF4;
+	/* 4.1.2.1: ... PCI Device ID calculated by adding 0x1040 ... */
+	pci->device_id = 0x1040 + type;
+
+	/*
+	 * PCI have specific codes for different types of devices.
+	 * Linux doesn't care, but it's a good clue for people looking
+	 * at the device.
+	 */
+	pci->class = class;
+	pci->subclass = subclass;
+
+	/*
+	 * 4.1.2.1:
+	 *
+	 *  Non-transitional devices SHOULD have a PCI Revision ID of 1 or
+	 *  higher
+	 */
+	pci->revid = 1;
+
+	/*
+	 * 4.1.2.1:
+	 *
+	 *  Non-transitional devices SHOULD have a PCI Subsystem Device ID of
+	 *  0x40 or higher.
+	 */
+	pci->subsystem_device_id = 0x40;
+
+	/* We use our dummy interrupt controller, and irq_line is the irq */
+	pci->irq_line = devices.next_irq++;
+	pci->irq_pin = 0;
+
+	/* Support for extended capabilities. */
+	pci->status = (1 << 4);
+
+	/* Link them in. */
+	/*
+	 * 4.1.4.3.1:
+	 *
+	 *  The device MUST present at least one common configuration
+	 *  capability.
+	 */
+	pci->capabilities = offsetof(struct pci_config, common);
+
+	/* 4.1.4.3.1 ... offset MUST be 4-byte aligned. */
+	assert(pci->capabilities % 4 == 0);
+
+	bar_offset = offsetof(struct virtio_pci_mmio, cfg);
+	bar_len = sizeof(((struct virtio_pci_mmio *)0)->cfg);
+	init_cap(&pci->common, sizeof(pci->common), VIRTIO_PCI_CAP_COMMON_CFG,
+		 bar_offset, bar_len,
+		 offsetof(struct pci_config, notify));
+
+	/*
+	 * 4.1.4.4.1:
+	 *
+	 *  The device MUST present at least one notification capability.
+	 */
+	bar_offset += bar_len;
+	bar_len = sizeof(((struct virtio_pci_mmio *)0)->notify);
+
+	/*
+	 * 4.1.4.4.1:
+	 *
+	 *  The cap.offset MUST be 2-byte aligned.
+	 */
+	assert(pci->common.cap_next % 2 == 0);
+
+	/* FIXME: Use a non-zero notify_off, for per-queue notification? */
+	/*
+	 * 4.1.4.4.1:
+	 *
+	 *  The value cap.length presented by the device MUST be at least 2 and
+	 *  MUST be large enough to support queue notification offsets for all
+	 *  supported queues in all possible configurations.
+	 */
+	assert(bar_len >= 2);
+
+	init_cap(&pci->notify.cap, sizeof(pci->notify),
+		 VIRTIO_PCI_CAP_NOTIFY_CFG,
+		 bar_offset, bar_len,
+		 offsetof(struct pci_config, isr));
+
+	bar_offset += bar_len;
+	bar_len = sizeof(((struct virtio_pci_mmio *)0)->isr);
+	/*
+	 * 4.1.4.5.1:
+	 *
+	 *  The device MUST present at least one VIRTIO_PCI_CAP_ISR_CFG
+	 *  capability.
+	 */
+	init_cap(&pci->isr, sizeof(pci->isr),
+		 VIRTIO_PCI_CAP_ISR_CFG,
+		 bar_offset, bar_len,
+		 offsetof(struct pci_config, cfg_access));
+
+	/*
+	 * 4.1.4.7.1:
+	 *
+	 * The device MUST present at least one VIRTIO_PCI_CAP_PCI_CFG
+	 * capability.
+	 */
+	/* This doesn't have any presence in the BAR */
+	init_cap(&pci->cfg_access.cap, sizeof(pci->cfg_access),
+		 VIRTIO_PCI_CAP_PCI_CFG,
+		 0, 0, 0);
+
+	bar_offset += bar_len + sizeof(((struct virtio_pci_mmio *)0)->padding);
+	assert(bar_offset == sizeof(struct virtio_pci_mmio));
+
+	/*
+	 * This gets sewn in and length set in set_device_config().
+	 * Some devices don't have a device configuration interface, so
+	 * we never expose this if we don't call set_device_config().
+	 */
+	init_cap(&pci->device, sizeof(pci->device), VIRTIO_PCI_CAP_DEVICE_CFG,
+		 bar_offset, 0, 0);
+}
+
+/*
+ * This routine does all the creation and setup of a new device, but we don't
+ * actually place the MMIO region until we know the size (if any) of the
+ * device-specific config.  And we don't actually start the service threads
+ * until later.
+ *
+ * See what I mean about userspace being boring?
+ */
+static struct device *new_pci_device(const char *name, u16 type,
+				     u8 class, u8 subclass)
+{
+	struct device *dev = malloc(sizeof(*dev));
+
+	/* Now we populate the fields one at a time. */
+	dev->name = name;
+	dev->vq = NULL;
+	dev->running = false;
+	dev->wrote_features_ok = false;
+	dev->mmio_size = sizeof(struct virtio_pci_mmio);
+	dev->mmio = calloc(1, dev->mmio_size);
+	dev->features = (u64)1 << VIRTIO_F_VERSION_1;
+	dev->features_accepted = 0;
+
+	if (devices.device_num + 1 >= MAX_PCI_DEVICES)
+		errx(1, "Can only handle 31 PCI devices");
+
+	init_pci_config(&dev->config, type, class, subclass);
+	assert(!devices.pci[devices.device_num+1]);
+	devices.pci[++devices.device_num] = dev;
+
+	return dev;
+}
+
+/*
+ * Our first setup routine is the console.  It's a fairly simple device, but
+ * UNIX tty handling makes it uglier than it could be.
+ */
+static void setup_console(void)
+{
+	struct device *dev;
+	struct virtio_console_config conf;
+
+	/* If we can save the initial standard input settings... */
+	if (tcgetattr(STDIN_FILENO, &orig_term) == 0) {
+		struct termios term = orig_term;
+		/*
+		 * Then we turn off echo, line buffering and ^C etc: We want a
+		 * raw input stream to the Guest.
+		 */
+		term.c_lflag &= ~(ISIG|ICANON|ECHO);
+		tcsetattr(STDIN_FILENO, TCSANOW, &term);
+	}
+
+	dev = new_pci_device("console", VIRTIO_ID_CONSOLE, 0x07, 0x00);
+
+	/* We store the console state in dev->priv, and initialize it. */
+	dev->priv = malloc(sizeof(struct console_abort));
+	((struct console_abort *)dev->priv)->count = 0;
+
+	/*
+	 * The console needs two virtqueues: the input then the output.  When
+	 * they put something the input queue, we make sure we're listening to
+	 * stdin.  When they put something in the output queue, we write it to
+	 * stdout.
+	 */
+	add_pci_virtqueue(dev, console_input, "input");
+	add_pci_virtqueue(dev, console_output, "output");
+
+	/* We need a configuration area for the emerg_wr early writes. */
+	add_pci_feature(dev, VIRTIO_CONSOLE_F_EMERG_WRITE);
+	set_device_config(dev, &conf, sizeof(conf));
+
+	verbose("device %u: console\n", devices.device_num);
+}
+/*:*/
+
+/*M:010
+ * Inter-guest networking is an interesting area.  Simplest is to have a
+ * --sharenet=<name> option which opens or creates a named pipe.  This can be
+ * used to send packets to another guest in a 1:1 manner.
+ *
+ * More sophisticated is to use one of the tools developed for project like UML
+ * to do networking.
+ *
+ * Faster is to do virtio bonding in kernel.  Doing this 1:1 would be
+ * completely generic ("here's my vring, attach to your vring") and would work
+ * for any traffic.  Of course, namespace and permissions issues need to be
+ * dealt with.  A more sophisticated "multi-channel" virtio_net.c could hide
+ * multiple inter-guest channels behind one interface, although it would
+ * require some manner of hotplugging new virtio channels.
+ *
+ * Finally, we could use a virtio network switch in the kernel, ie. vhost.
+:*/
+
+static u32 str2ip(const char *ipaddr)
+{
+	unsigned int b[4];
+
+	if (sscanf(ipaddr, "%u.%u.%u.%u", &b[0], &b[1], &b[2], &b[3]) != 4)
+		errx(1, "Failed to parse IP address '%s'", ipaddr);
+	return (b[0] << 24) | (b[1] << 16) | (b[2] << 8) | b[3];
+}
+
+static void str2mac(const char *macaddr, unsigned char mac[6])
+{
+	unsigned int m[6];
+	if (sscanf(macaddr, "%02x:%02x:%02x:%02x:%02x:%02x",
+		   &m[0], &m[1], &m[2], &m[3], &m[4], &m[5]) != 6)
+		errx(1, "Failed to parse mac address '%s'", macaddr);
+	mac[0] = m[0];
+	mac[1] = m[1];
+	mac[2] = m[2];
+	mac[3] = m[3];
+	mac[4] = m[4];
+	mac[5] = m[5];
+}
+
+/*
+ * This code is "adapted" from libbridge: it attaches the Host end of the
+ * network device to the bridge device specified by the command line.
+ *
+ * This is yet another James Morris contribution (I'm an IP-level guy, so I
+ * dislike bridging), and I just try not to break it.
+ */
+static void add_to_bridge(int fd, const char *if_name, const char *br_name)
+{
+	int ifidx;
+	struct ifreq ifr;
+
+	if (!*br_name)
+		errx(1, "must specify bridge name");
+
+	ifidx = if_nametoindex(if_name);
+	if (!ifidx)
+		errx(1, "interface %s does not exist!", if_name);
+
+	strncpy(ifr.ifr_name, br_name, IFNAMSIZ);
+	ifr.ifr_name[IFNAMSIZ-1] = '\0';
+	ifr.ifr_ifindex = ifidx;
+	if (ioctl(fd, SIOCBRADDIF, &ifr) < 0)
+		err(1, "can't add %s to bridge %s", if_name, br_name);
+}
+
+/*
+ * This sets up the Host end of the network device with an IP address, brings
+ * it up so packets will flow, the copies the MAC address into the hwaddr
+ * pointer.
+ */
+static void configure_device(int fd, const char *tapif, u32 ipaddr)
+{
+	struct ifreq ifr;
+	struct sockaddr_in sin;
+
+	memset(&ifr, 0, sizeof(ifr));
+	strcpy(ifr.ifr_name, tapif);
+
+	/* Don't read these incantations.  Just cut & paste them like I did! */
+	sin.sin_family = AF_INET;
+	sin.sin_addr.s_addr = htonl(ipaddr);
+	memcpy(&ifr.ifr_addr, &sin, sizeof(sin));
+	if (ioctl(fd, SIOCSIFADDR, &ifr) != 0)
+		err(1, "Setting %s interface address", tapif);
+	ifr.ifr_flags = IFF_UP;
+	if (ioctl(fd, SIOCSIFFLAGS, &ifr) != 0)
+		err(1, "Bringing interface %s up", tapif);
+}
+
+static int get_tun_device(char tapif[IFNAMSIZ])
+{
+	struct ifreq ifr;
+	int vnet_hdr_sz;
+	int netfd;
+
+	/* Start with this zeroed.  Messy but sure. */
+	memset(&ifr, 0, sizeof(ifr));
+
+	/*
+	 * We open the /dev/net/tun device and tell it we want a tap device.  A
+	 * tap device is like a tun device, only somehow different.  To tell
+	 * the truth, I completely blundered my way through this code, but it
+	 * works now!
+	 */
+	netfd = open_or_die("/dev/net/tun", O_RDWR);
+	ifr.ifr_flags = IFF_TAP | IFF_NO_PI | IFF_VNET_HDR;
+	strcpy(ifr.ifr_name, "tap%d");
+	if (ioctl(netfd, TUNSETIFF, &ifr) != 0)
+		err(1, "configuring /dev/net/tun");
+
+	if (ioctl(netfd, TUNSETOFFLOAD,
+		  TUN_F_CSUM|TUN_F_TSO4|TUN_F_TSO6|TUN_F_TSO_ECN) != 0)
+		err(1, "Could not set features for tun device");
+
+	/*
+	 * We don't need checksums calculated for packets coming in this
+	 * device: trust us!
+	 */
+	ioctl(netfd, TUNSETNOCSUM, 1);
+
+	/*
+	 * In virtio before 1.0 (aka legacy virtio), we added a 16-bit
+	 * field at the end of the network header iff
+	 * VIRTIO_NET_F_MRG_RXBUF was negotiated.  For virtio 1.0,
+	 * that became the norm, but we need to tell the tun device
+	 * about our expanded header (which is called
+	 * virtio_net_hdr_mrg_rxbuf in the legacy system).
+	 */
+	vnet_hdr_sz = sizeof(struct virtio_net_hdr_v1);
+	if (ioctl(netfd, TUNSETVNETHDRSZ, &vnet_hdr_sz) != 0)
+		err(1, "Setting tun header size to %u", vnet_hdr_sz);
+
+	memcpy(tapif, ifr.ifr_name, IFNAMSIZ);
+	return netfd;
+}
+
+/*L:195
+ * Our network is a Host<->Guest network.  This can either use bridging or
+ * routing, but the principle is the same: it uses the "tun" device to inject
+ * packets into the Host as if they came in from a normal network card.  We
+ * just shunt packets between the Guest and the tun device.
+ */
+static void setup_tun_net(char *arg)
+{
+	struct device *dev;
+	struct net_info *net_info = malloc(sizeof(*net_info));
+	int ipfd;
+	u32 ip = INADDR_ANY;
+	bool bridging = false;
+	char tapif[IFNAMSIZ], *p;
+	struct virtio_net_config conf;
+
+	net_info->tunfd = get_tun_device(tapif);
+
+	/* First we create a new network device. */
+	dev = new_pci_device("net", VIRTIO_ID_NET, 0x02, 0x00);
+	dev->priv = net_info;
+
+	/* Network devices need a recv and a send queue, just like console. */
+	add_pci_virtqueue(dev, net_input, "rx");
+	add_pci_virtqueue(dev, net_output, "tx");
+
+	/*
+	 * We need a socket to perform the magic network ioctls to bring up the
+	 * tap interface, connect to the bridge etc.  Any socket will do!
+	 */
+	ipfd = socket(PF_INET, SOCK_DGRAM, IPPROTO_IP);
+	if (ipfd < 0)
+		err(1, "opening IP socket");
+
+	/* If the command line was --tunnet=bridge:<name> do bridging. */
+	if (!strncmp(BRIDGE_PFX, arg, strlen(BRIDGE_PFX))) {
+		arg += strlen(BRIDGE_PFX);
+		bridging = true;
+	}
+
+	/* A mac address may follow the bridge name or IP address */
+	p = strchr(arg, ':');
+	if (p) {
+		str2mac(p+1, conf.mac);
+		add_pci_feature(dev, VIRTIO_NET_F_MAC);
+		*p = '\0';
+	}
+
+	/* arg is now either an IP address or a bridge name */
+	if (bridging)
+		add_to_bridge(ipfd, tapif, arg);
+	else
+		ip = str2ip(arg);
+
+	/* Set up the tun device. */
+	configure_device(ipfd, tapif, ip);
+
+	/* Expect Guest to handle everything except UFO */
+	add_pci_feature(dev, VIRTIO_NET_F_CSUM);
+	add_pci_feature(dev, VIRTIO_NET_F_GUEST_CSUM);
+	add_pci_feature(dev, VIRTIO_NET_F_GUEST_TSO4);
+	add_pci_feature(dev, VIRTIO_NET_F_GUEST_TSO6);
+	add_pci_feature(dev, VIRTIO_NET_F_GUEST_ECN);
+	add_pci_feature(dev, VIRTIO_NET_F_HOST_TSO4);
+	add_pci_feature(dev, VIRTIO_NET_F_HOST_TSO6);
+	add_pci_feature(dev, VIRTIO_NET_F_HOST_ECN);
+	/* We handle indirect ring entries */
+	add_pci_feature(dev, VIRTIO_RING_F_INDIRECT_DESC);
+	set_device_config(dev, &conf, sizeof(conf));
+
+	/* We don't need the socket any more; setup is done. */
+	close(ipfd);
+
+	if (bridging)
+		verbose("device %u: tun %s attached to bridge: %s\n",
+			devices.device_num, tapif, arg);
+	else
+		verbose("device %u: tun %s: %s\n",
+			devices.device_num, tapif, arg);
+}
+/*:*/
+
+/* This hangs off device->priv. */
+struct vblk_info {
+	/* The size of the file. */
+	off64_t len;
+
+	/* The file descriptor for the file. */
+	int fd;
+
+};
+
+/*L:210
+ * The Disk
+ *
+ * The disk only has one virtqueue, so it only has one thread.  It is really
+ * simple: the Guest asks for a block number and we read or write that position
+ * in the file.
+ *
+ * Before we serviced each virtqueue in a separate thread, that was unacceptably
+ * slow: the Guest waits until the read is finished before running anything
+ * else, even if it could have been doing useful work.
+ *
+ * We could have used async I/O, except it's reputed to suck so hard that
+ * characters actually go missing from your code when you try to use it.
+ */
+static void blk_request(struct virtqueue *vq)
+{
+	struct vblk_info *vblk = vq->dev->priv;
+	unsigned int head, out_num, in_num, wlen;
+	int ret, i;
+	u8 *in;
+	struct virtio_blk_outhdr out;
+	struct iovec iov[vq->vring.num];
+	off64_t off;
+
+	/*
+	 * Get the next request, where we normally wait.  It triggers the
+	 * interrupt to acknowledge previously serviced requests (if any).
+	 */
+	head = wait_for_vq_desc(vq, iov, &out_num, &in_num);
+
+	/* Copy the output header from the front of the iov (adjusts iov) */
+	iov_consume(vq->dev, iov, out_num, &out, sizeof(out));
+
+	/* Find and trim end of iov input array, for our status byte. */
+	in = NULL;
+	for (i = out_num + in_num - 1; i >= out_num; i--) {
+		if (iov[i].iov_len > 0) {
+			in = iov[i].iov_base + iov[i].iov_len - 1;
+			iov[i].iov_len--;
+			break;
+		}
+	}
+	if (!in)
+		bad_driver_vq(vq, "Bad virtblk cmd with no room for status");
+
+	/*
+	 * For historical reasons, block operations are expressed in 512 byte
+	 * "sectors".
+	 */
+	off = out.sector * 512;
+
+	if (out.type & VIRTIO_BLK_T_OUT) {
+		/*
+		 * Write
+		 *
+		 * Move to the right location in the block file.  This can fail
+		 * if they try to write past end.
+		 */
+		if (lseek64(vblk->fd, off, SEEK_SET) != off)
+			err(1, "Bad seek to sector %llu", out.sector);
+
+		ret = writev(vblk->fd, iov, out_num);
+		verbose("WRITE to sector %llu: %i\n", out.sector, ret);
+
+		/*
+		 * Grr... Now we know how long the descriptor they sent was, we
+		 * make sure they didn't try to write over the end of the block
+		 * file (possibly extending it).
+		 */
+		if (ret > 0 && off + ret > vblk->len) {
+			/* Trim it back to the correct length */
+			ftruncate64(vblk->fd, vblk->len);
+			/* Die, bad Guest, die. */
+			bad_driver_vq(vq, "Write past end %llu+%u", off, ret);
+		}
+
+		wlen = sizeof(*in);
+		*in = (ret >= 0 ? VIRTIO_BLK_S_OK : VIRTIO_BLK_S_IOERR);
+	} else if (out.type & VIRTIO_BLK_T_FLUSH) {
+		/* Flush */
+		ret = fdatasync(vblk->fd);
+		verbose("FLUSH fdatasync: %i\n", ret);
+		wlen = sizeof(*in);
+		*in = (ret >= 0 ? VIRTIO_BLK_S_OK : VIRTIO_BLK_S_IOERR);
+	} else {
+		/*
+		 * Read
+		 *
+		 * Move to the right location in the block file.  This can fail
+		 * if they try to read past end.
+		 */
+		if (lseek64(vblk->fd, off, SEEK_SET) != off)
+			err(1, "Bad seek to sector %llu", out.sector);
+
+		ret = readv(vblk->fd, iov + out_num, in_num);
+		if (ret >= 0) {
+			wlen = sizeof(*in) + ret;
+			*in = VIRTIO_BLK_S_OK;
+		} else {
+			wlen = sizeof(*in);
+			*in = VIRTIO_BLK_S_IOERR;
+		}
+	}
+
+	/* Finished that request. */
+	add_used(vq, head, wlen);
+}
+
+/*L:198 This actually sets up a virtual block device. */
+static void setup_block_file(const char *filename)
+{
+	struct device *dev;
+	struct vblk_info *vblk;
+	struct virtio_blk_config conf;
+
+	/* Create the device. */
+	dev = new_pci_device("block", VIRTIO_ID_BLOCK, 0x01, 0x80);
+
+	/* The device has one virtqueue, where the Guest places requests. */
+	add_pci_virtqueue(dev, blk_request, "request");
+
+	/* Allocate the room for our own bookkeeping */
+	vblk = dev->priv = malloc(sizeof(*vblk));
+
+	/* First we open the file and store the length. */
+	vblk->fd = open_or_die(filename, O_RDWR|O_LARGEFILE);
+	vblk->len = lseek64(vblk->fd, 0, SEEK_END);
+
+	/* Tell Guest how many sectors this device has. */
+	conf.capacity = cpu_to_le64(vblk->len / 512);
+
+	/*
+	 * Tell Guest not to put in too many descriptors at once: two are used
+	 * for the in and out elements.
+	 */
+	add_pci_feature(dev, VIRTIO_BLK_F_SEG_MAX);
+	conf.seg_max = cpu_to_le32(VIRTQUEUE_NUM - 2);
+
+	set_device_config(dev, &conf, sizeof(struct virtio_blk_config));
+
+	verbose("device %u: virtblock %llu sectors\n",
+		devices.device_num, le64_to_cpu(conf.capacity));
+}
+
+/*L:211
+ * Our random number generator device reads from /dev/urandom into the Guest's
+ * input buffers.  The usual case is that the Guest doesn't want random numbers
+ * and so has no buffers although /dev/urandom is still readable, whereas
+ * console is the reverse.
+ *
+ * The same logic applies, however.
+ */
+struct rng_info {
+	int rfd;
+};
+
+static void rng_input(struct virtqueue *vq)
+{
+	int len;
+	unsigned int head, in_num, out_num, totlen = 0;
+	struct rng_info *rng_info = vq->dev->priv;
+	struct iovec iov[vq->vring.num];
+
+	/* First we need a buffer from the Guests's virtqueue. */
+	head = wait_for_vq_desc(vq, iov, &out_num, &in_num);
+	if (out_num)
+		bad_driver_vq(vq, "Output buffers in rng?");
+
+	/*
+	 * Just like the console write, we loop to cover the whole iovec.
+	 * In this case, short reads actually happen quite a bit.
+	 */
+	while (!iov_empty(iov, in_num)) {
+		len = readv(rng_info->rfd, iov, in_num);
+		if (len <= 0)
+			err(1, "Read from /dev/urandom gave %i", len);
+		iov_consume(vq->dev, iov, in_num, NULL, len);
+		totlen += len;
+	}
+
+	/* Tell the Guest about the new input. */
+	add_used(vq, head, totlen);
+}
+
+/*L:199
+ * This creates a "hardware" random number device for the Guest.
+ */
+static void setup_rng(void)
+{
+	struct device *dev;
+	struct rng_info *rng_info = malloc(sizeof(*rng_info));
+
+	/* Our device's private info simply contains the /dev/urandom fd. */
+	rng_info->rfd = open_or_die("/dev/urandom", O_RDONLY);
+
+	/* Create the new device. */
+	dev = new_pci_device("rng", VIRTIO_ID_RNG, 0xff, 0);
+	dev->priv = rng_info;
+
+	/* The device has one virtqueue, where the Guest places inbufs. */
+	add_pci_virtqueue(dev, rng_input, "input");
+
+	/* We don't have any configuration space */
+	no_device_config(dev);
+
+	verbose("device %u: rng\n", devices.device_num);
+}
+/* That's the end of device setup. */
+
+/*L:230 Reboot is pretty easy: clean up and exec() the Launcher afresh. */
+static void __attribute__((noreturn)) restart_guest(void)
+{
+	unsigned int i;
+
+	/*
+	 * Since we don't track all open fds, we simply close everything beyond
+	 * stderr.
+	 */
+	for (i = 3; i < FD_SETSIZE; i++)
+		close(i);
+
+	/* Reset all the devices (kills all threads). */
+	cleanup_devices();
+
+	execv(main_args[0], main_args);
+	err(1, "Could not exec %s", main_args[0]);
+}
+
+/*L:220
+ * Finally we reach the core of the Launcher which runs the Guest, serves
+ * its input and output, and finally, lays it to rest.
+ */
+static void __attribute__((noreturn)) run_guest(void)
+{
+	for (;;) {
+		struct lguest_pending notify;
+		int readval;
+
+		/* We read from the /dev/lguest device to run the Guest. */
+		readval = pread(lguest_fd, &notify, sizeof(notify), cpu_id);
+		if (readval == sizeof(notify)) {
+			if (notify.trap == 13) {
+				verbose("Emulating instruction at %#x\n",
+					getreg(eip));
+				emulate_insn(notify.insn);
+			} else if (notify.trap == 14) {
+				verbose("Emulating MMIO at %#x\n",
+					getreg(eip));
+				emulate_mmio(notify.addr, notify.insn);
+			} else
+				errx(1, "Unknown trap %i addr %#08x\n",
+				     notify.trap, notify.addr);
+		/* ENOENT means the Guest died.  Reading tells us why. */
+		} else if (errno == ENOENT) {
+			char reason[1024] = { 0 };
+			pread(lguest_fd, reason, sizeof(reason)-1, cpu_id);
+			errx(1, "%s", reason);
+		/* ERESTART means that we need to reboot the guest */
+		} else if (errno == ERESTART) {
+			restart_guest();
+		/* Anything else means a bug or incompatible change. */
+		} else
+			err(1, "Running guest failed");
+	}
+}
+/*L:240
+ * This is the end of the Launcher.  The good news: we are over halfway
+ * through!  The bad news: the most fiendish part of the code still lies ahead
+ * of us.
+ *
+ * Are you ready?  Take a deep breath and join me in the core of the Host, in
+ * "make Host".
+:*/
+
+static struct option opts[] = {
+	{ "verbose", 0, NULL, 'v' },
+	{ "tunnet", 1, NULL, 't' },
+	{ "block", 1, NULL, 'b' },
+	{ "rng", 0, NULL, 'r' },
+	{ "initrd", 1, NULL, 'i' },
+	{ "username", 1, NULL, 'u' },
+	{ "chroot", 1, NULL, 'c' },
+	{ NULL },
+};
+static void usage(void)
+{
+	errx(1, "Usage: lguest [--verbose] "
+	     "[--tunnet=(<ipaddr>:<macaddr>|bridge:<bridgename>:<macaddr>)\n"
+	     "|--block=<filename>|--initrd=<filename>]...\n"
+	     "<mem-in-mb> vmlinux [args...]");
+}
+
+/*L:105 The main routine is where the real work begins: */
+int main(int argc, char *argv[])
+{
+	/* Memory, code startpoint and size of the (optional) initrd. */
+	unsigned long mem = 0, start, initrd_size = 0;
+	/* Two temporaries. */
+	int i, c;
+	/* The boot information for the Guest. */
+	struct boot_params *boot;
+	/* If they specify an initrd file to load. */
+	const char *initrd_name = NULL;
+
+	/* Password structure for initgroups/setres[gu]id */
+	struct passwd *user_details = NULL;
+
+	/* Directory to chroot to */
+	char *chroot_path = NULL;
+
+	/* Save the args: we "reboot" by execing ourselves again. */
+	main_args = argv;
+
+	/*
+	 * First we initialize the device list.  We remember next interrupt
+	 * number to use for devices (1: remember that 0 is used by the timer).
+	 */
+	devices.next_irq = 1;
+
+	/* We're CPU 0.  In fact, that's the only CPU possible right now. */
+	cpu_id = 0;
+
+	/*
+	 * We need to know how much memory so we can set up the device
+	 * descriptor and memory pages for the devices as we parse the command
+	 * line.  So we quickly look through the arguments to find the amount
+	 * of memory now.
+	 */
+	for (i = 1; i < argc; i++) {
+		if (argv[i][0] != '-') {
+			mem = atoi(argv[i]) * 1024 * 1024;
+			/*
+			 * We start by mapping anonymous pages over all of
+			 * guest-physical memory range.  This fills it with 0,
+			 * and ensures that the Guest won't be killed when it
+			 * tries to access it.
+			 */
+			guest_base = map_zeroed_pages(mem / getpagesize()
+						      + DEVICE_PAGES);
+			guest_limit = mem;
+			guest_max = guest_mmio = mem + DEVICE_PAGES*getpagesize();
+			break;
+		}
+	}
+
+	/* We always have a console device, and it's always device 1. */
+	setup_console();
+
+	/* The options are fairly straight-forward */
+	while ((c = getopt_long(argc, argv, "v", opts, NULL)) != EOF) {
+		switch (c) {
+		case 'v':
+			verbose = true;
+			break;
+		case 't':
+			setup_tun_net(optarg);
+			break;
+		case 'b':
+			setup_block_file(optarg);
+			break;
+		case 'r':
+			setup_rng();
+			break;
+		case 'i':
+			initrd_name = optarg;
+			break;
+		case 'u':
+			user_details = getpwnam(optarg);
+			if (!user_details)
+				err(1, "getpwnam failed, incorrect username?");
+			break;
+		case 'c':
+			chroot_path = optarg;
+			break;
+		default:
+			warnx("Unknown argument %s", argv[optind]);
+			usage();
+		}
+	}
+	/*
+	 * After the other arguments we expect memory and kernel image name,
+	 * followed by command line arguments for the kernel.
+	 */
+	if (optind + 2 > argc)
+		usage();
+
+	verbose("Guest base is at %p\n", guest_base);
+
+	/* Initialize the (fake) PCI host bridge device. */
+	init_pci_host_bridge();
+
+	/* Now we load the kernel */
+	start = load_kernel(open_or_die(argv[optind+1], O_RDONLY));
+
+	/* Boot information is stashed at physical address 0 */
+	boot = from_guest_phys(0);
+
+	/* Map the initrd image if requested (at top of physical memory) */
+	if (initrd_name) {
+		initrd_size = load_initrd(initrd_name, mem);
+		/*
+		 * These are the location in the Linux boot header where the
+		 * start and size of the initrd are expected to be found.
+		 */
+		boot->hdr.ramdisk_image = mem - initrd_size;
+		boot->hdr.ramdisk_size = initrd_size;
+		/* The bootloader type 0xFF means "unknown"; that's OK. */
+		boot->hdr.type_of_loader = 0xFF;
+	}
+
+	/*
+	 * The Linux boot header contains an "E820" memory map: ours is a
+	 * simple, single region.
+	 */
+	boot->e820_entries = 1;
+	boot->e820_map[0] = ((struct e820entry) { 0, mem, E820_RAM });
+	/*
+	 * The boot header contains a command line pointer: we put the command
+	 * line after the boot header.
+	 */
+	boot->hdr.cmd_line_ptr = to_guest_phys(boot + 1);
+	/* We use a simple helper to copy the arguments separated by spaces. */
+	concat((char *)(boot + 1), argv+optind+2);
+
+	/* Set kernel alignment to 16M (CONFIG_PHYSICAL_ALIGN) */
+	boot->hdr.kernel_alignment = 0x1000000;
+
+	/* Boot protocol version: 2.07 supports the fields for lguest. */
+	boot->hdr.version = 0x207;
+
+	/* The hardware_subarch value of "1" tells the Guest it's an lguest. */
+	boot->hdr.hardware_subarch = 1;
+
+	/* Tell the entry path not to try to reload segment registers. */
+	boot->hdr.loadflags |= KEEP_SEGMENTS;
+
+	/* We tell the kernel to initialize the Guest. */
+	tell_kernel(start);
+
+	/* Ensure that we terminate if a device-servicing child dies. */
+	signal(SIGCHLD, kill_launcher);
+
+	/* If we exit via err(), this kills all the threads, restores tty. */
+	atexit(cleanup_devices);
+
+	/* If requested, chroot to a directory */
+	if (chroot_path) {
+		if (chroot(chroot_path) != 0)
+			err(1, "chroot(\"%s\") failed", chroot_path);
+
+		if (chdir("/") != 0)
+			err(1, "chdir(\"/\") failed");
+
+		verbose("chroot done\n");
+	}
+
+	/* If requested, drop privileges */
+	if (user_details) {
+		uid_t u;
+		gid_t g;
+
+		u = user_details->pw_uid;
+		g = user_details->pw_gid;
+
+		if (initgroups(user_details->pw_name, g) != 0)
+			err(1, "initgroups failed");
+
+		if (setresgid(g, g, g) != 0)
+			err(1, "setresgid failed");
+
+		if (setresuid(u, u, u) != 0)
+			err(1, "setresuid failed");
+
+		verbose("Dropping privileges completed\n");
+	}
+
+	/* Finally, run the Guest.  This doesn't return. */
+	run_guest();
+}
+/*:*/
+
+/*M:999
+ * Mastery is done: you now know everything I do.
+ *
+ * But surely you have seen code, features and bugs in your wanderings which
+ * you now yearn to attack?  That is the real game, and I look forward to you
+ * patching and forking lguest into the Your-Name-Here-visor.
+ *
+ * Farewell, and good coding!
+ * Rusty Russell.
+ */
diff --git a/kernel/tools/lguest/lguest.txt b/kernel/tools/lguest/lguest.txt
new file mode 100644
index 000000000..06e1f4649
--- /dev/null
+++ b/kernel/tools/lguest/lguest.txt
@@ -0,0 +1,125 @@
+      __
+ (___()'`;  Rusty's Remarkably Unreliable Guide to Lguest
+ /,    /`      - or, A Young Coder's Illustrated Hypervisor
+ \\"--\\    http://lguest.ozlabs.org
+
+Lguest is designed to be a minimal 32-bit x86 hypervisor for the Linux kernel,
+for Linux developers and users to experiment with virtualization with the
+minimum of complexity.  Nonetheless, it should have sufficient features to
+make it useful for specific tasks, and, of course, you are encouraged to fork
+and enhance it (see drivers/lguest/README).
+
+Features:
+
+- Kernel module which runs in a normal kernel.
+- Simple I/O model for communication.
+- Simple program to create new guests.
+- Logo contains cute puppies: http://lguest.ozlabs.org
+
+Developer features:
+
+- Fun to hack on.
+- No ABI: being tied to a specific kernel anyway, you can change anything.
+- Many opportunities for improvement or feature implementation.
+
+Running Lguest:
+
+- The easiest way to run lguest is to use same kernel as guest and host.
+  You can configure them differently, but usually it's easiest not to.
+
+  You will need to configure your kernel with the following options:
+
+  "Processor type and features":
+     "Paravirtualized guest support" = Y
+        "Lguest guest support" = Y
+     "High Memory Support" = off/4GB
+     "Alignment value to which kernel should be aligned" = 0x100000
+        (CONFIG_PARAVIRT=y, CONFIG_LGUEST_GUEST=y, CONFIG_HIGHMEM64G=n and
+         CONFIG_PHYSICAL_ALIGN=0x100000)
+
+  "Device Drivers":
+     "Block devices"
+        "Virtio block driver" = M/Y
+     "Network device support"
+        "Universal TUN/TAP device driver support" = M/Y
+        "Virtio network driver" = M/Y
+           (CONFIG_VIRTIO_BLK=m, CONFIG_VIRTIO_NET=m and CONFIG_TUN=m)
+
+  "Virtualization"
+     "Linux hypervisor example code" = M/Y
+        (CONFIG_LGUEST=m)
+
+- A tool called "lguest" is available in this directory: type "make"
+  to build it.  If you didn't build your kernel in-tree, use "make
+  O=<builddir>".
+
+- Create or find a root disk image.  There are several useful ones
+  around, such as the xm-test tiny root image at
+	  http://xm-test.xensource.com/ramdisks/initrd-1.1-i386.img
+
+  For more serious work, I usually use a distribution ISO image and
+  install it under qemu, then make multiple copies:
+
+	  dd if=/dev/zero of=rootfile bs=1M count=2048
+	  qemu -cdrom image.iso -hda rootfile -net user -net nic -boot d
+
+  Make sure that you install a getty on /dev/hvc0 if you want to log in on the
+  console!
+
+- "modprobe lg" if you built it as a module.
+
+- Run an lguest as root:
+
+      tools/lguest/lguest 64 vmlinux --tunnet=192.168.19.1 \
+        --block=rootfile root=/dev/vda
+
+   Explanation:
+    64: the amount of memory to use, in MB.
+
+    vmlinux: the kernel image found in the top of your build directory.  You
+       can also use a standard bzImage.
+
+    --tunnet=192.168.19.1: configures a "tap" device for networking with this
+       IP address.
+
+    --block=rootfile: a file or block device which becomes /dev/vda
+       inside the guest.
+
+    root=/dev/vda: this (and anything else on the command line) are
+       kernel boot parameters.
+
+- Configuring networking.  I usually have the host masquerade, using
+  "iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE" and "echo 1 >
+  /proc/sys/net/ipv4/ip_forward".  In this example, I would configure
+  eth0 inside the guest at 192.168.19.2.
+
+  Another method is to bridge the tap device to an external interface
+  using --tunnet=bridge:<bridgename>, and perhaps run dhcp on the guest
+  to obtain an IP address.  The bridge needs to be configured first:
+  this option simply adds the tap interface to it.
+
+  A simple example on my system:
+
+    ifconfig eth0 0.0.0.0
+    brctl addbr lg0
+    ifconfig lg0 up
+    brctl addif lg0 eth0
+    dhclient lg0
+
+  Then use --tunnet=bridge:lg0 when launching the guest.
+
+  See:
+  
+    http://www.linuxfoundation.org/collaborate/workgroups/networking/bridge
+    
+  for general information on how to get bridging to work.
+
+- Random number generation. Using the --rng option will provide a
+  /dev/hwrng in the guest that will read from the host's /dev/random.
+  Use this option in conjunction with rng-tools (see ../hw_random.txt)
+  to provide entropy to the guest kernel's /dev/random.
+
+There is a helpful mailing list at http://ozlabs.org/mailman/listinfo/lguest
+
+Good luck!
+Rusty Russell rusty@rustcorp.com.au.