These changes are the raw update to linux-4.4.6-rt14. Kernel sources

are taken from kernel.org, and rt patch from the rt wiki download page.

During the rebasing, the following patch collided:

Force tick interrupt and get rid of softirq magic(I70131fb85).

Collisions have been removed because its logic was found on the
source already.

Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>

1 files changed, 53 insertions, 5 deletions

diff --git a/kernel/sound/usb/midi.c b/kernel/sound/usb/midi.c
index 417ebb11c..b21b76690 100644
--- a/kernel/sound/usb/midi.c
+++ b/kernel/sound/usb/midi.c
@@ -174,6 +174,8 @@ struct snd_usb_midi_in_endpoint {
 		u8 running_status_length;
 	} ports[0x10];
 	u8 seen_f5;
+	bool in_sysex;
+	u8 last_cin;
 	u8 error_resubmit;
 	int current_port;
 };
@@ -468,6 +470,39 @@ static void snd_usbmidi_maudio_broken_running_status_input(
 }
 
 /*
+ * QinHeng CH345 is buggy: every second packet inside a SysEx has not CIN 4
+ * but the previously seen CIN, but still with three data bytes.
+ */
+static void ch345_broken_sysex_input(struct snd_usb_midi_in_endpoint *ep,
+				     uint8_t *buffer, int buffer_length)
+{
+	unsigned int i, cin, length;
+
+	for (i = 0; i + 3 < buffer_length; i += 4) {
+		if (buffer[i] == 0 && i > 0)
+			break;
+		cin = buffer[i] & 0x0f;
+		if (ep->in_sysex &&
+		    cin == ep->last_cin &&
+		    (buffer[i + 1 + (cin == 0x6)] & 0x80) == 0)
+			cin = 0x4;
+#if 0
+		if (buffer[i + 1] == 0x90) {
+			/*
+			 * Either a corrupted running status or a real note-on
+			 * message; impossible to detect reliably.
+			 */
+		}
+#endif
+		length = snd_usbmidi_cin_length[cin];
+		snd_usbmidi_input_data(ep, 0, &buffer[i + 1], length);
+		ep->in_sysex = cin == 0x4;
+		if (!ep->in_sysex)
+			ep->last_cin = cin;
+	}
+}
+
+/*
  * CME protocol: like the standard protocol, but SysEx commands are sent as a
  * single USB packet preceded by a 0x0F byte.
  */
@@ -660,6 +695,12 @@ static struct usb_protocol_ops snd_usbmidi_cme_ops = {
 	.output_packet = snd_usbmidi_output_standard_packet,
 };
 
+static struct usb_protocol_ops snd_usbmidi_ch345_broken_sysex_ops = {
+	.input = ch345_broken_sysex_input,
+	.output = snd_usbmidi_standard_output,
+	.output_packet = snd_usbmidi_output_standard_packet,
+};
+
 /*
  * AKAI MPD16 protocol:
  *
@@ -1341,6 +1382,7 @@ static int snd_usbmidi_out_endpoint_create(struct snd_usb_midi *umidi,
 		 * Various chips declare a packet size larger than 4 bytes, but
 		 * do not actually work with larger packets:
 		 */
+	case USB_ID(0x0a67, 0x5011): /* Medeli DD305 */
 	case USB_ID(0x0a92, 0x1020): /* ESI M4U */
 	case USB_ID(0x1430, 0x474b): /* RedOctane GH MIDI INTERFACE */
 	case USB_ID(0x15ca, 0x0101): /* Textech USB Midi Cable */
@@ -1903,11 +1945,14 @@ static void snd_usbmidi_switch_roland_altsetting(struct snd_usb_midi *umidi)
 
 	hostif = &intf->altsetting[1];
 	intfd = get_iface_desc(hostif);
+       /* If either or both of the endpoints support interrupt transfer,
+        * then use the alternate setting
+        */
 	if (intfd->bNumEndpoints != 2 ||
-	    (get_endpoint(hostif, 0)->bmAttributes &
-	     USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_BULK ||
-	    (get_endpoint(hostif, 1)->bmAttributes &
-	     USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_INT)
+	    !((get_endpoint(hostif, 0)->bmAttributes &
+	       USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT ||
+	      (get_endpoint(hostif, 1)->bmAttributes &
+	       USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT))
 		return;
 
 	dev_dbg(&umidi->dev->dev, "switching to altsetting %d with int ep\n",
@@ -2375,6 +2420,10 @@ int snd_usbmidi_create(struct snd_card *card,
 
 		err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints);
 		break;
+	case QUIRK_MIDI_CH345:
+		umidi->usb_protocol_ops = &snd_usbmidi_ch345_broken_sysex_ops;
+		err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints);
+		break;
 	default:
 		dev_err(&umidi->dev->dev, "invalid quirk type %d\n",
 			quirk->type);
@@ -2405,7 +2454,6 @@ int snd_usbmidi_create(struct snd_card *card,
 	else
 		err = snd_usbmidi_create_endpoints(umidi, endpoints);
 	if (err < 0) {
-		snd_usbmidi_free(umidi);
 		return err;
 	}