Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

1 files changed, 411 insertions, 0 deletions

diff --git a/kernel/sound/soc/sh/ssi.c b/kernel/sound/soc/sh/ssi.c
new file mode 100644
index 000000000..ab13146e4
--- /dev/null
+++ b/kernel/sound/soc/sh/ssi.c
@@ -0,0 +1,411 @@
+/*
+ * Serial Sound Interface (I2S) support for SH7760/SH7780
+ *
+ * Copyright (c) 2007 Manuel Lauss <mano@roarinelk.homelinux.net>
+ *
+ *  licensed under the terms outlined in the file COPYING at the root
+ *  of the linux kernel sources.
+ *
+ * dont forget to set IPSEL/OMSEL register bits (in your board code) to
+ * enable SSI output pins!
+ */
+
+/*
+ * LIMITATIONS:
+ *	The SSI unit has only one physical data line, so full duplex is
+ *	impossible.  This can be remedied  on the  SH7760 by  using the
+ *	other SSI unit for recording; however the SH7780 has only 1 SSI
+ *	unit, and its pins are shared with the AC97 unit,  among others.
+ *
+ * FEATURES:
+ *	The SSI features "compressed mode": in this mode it continuously
+ *	streams PCM data over the I2S lines and uses LRCK as a handshake
+ *	signal.  Can be used to send compressed data (AC3/DTS) to a DSP.
+ *	The number of bits sent over the wire in a frame can be adjusted
+ *	and can be independent from the actual sample bit depth. This is
+ *	useful to support TDM mode codecs like the AD1939 which have a
+ *	fixed TDM slot size, regardless of sample resolution.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/initval.h>
+#include <sound/soc.h>
+#include <asm/io.h>
+
+#define SSICR	0x00
+#define SSISR	0x04
+
+#define CR_DMAEN	(1 << 28)
+#define CR_CHNL_SHIFT	22
+#define CR_CHNL_MASK	(3 << CR_CHNL_SHIFT)
+#define CR_DWL_SHIFT	19
+#define CR_DWL_MASK	(7 << CR_DWL_SHIFT)
+#define CR_SWL_SHIFT	16
+#define CR_SWL_MASK	(7 << CR_SWL_SHIFT)
+#define CR_SCK_MASTER	(1 << 15)	/* bitclock master bit */
+#define CR_SWS_MASTER	(1 << 14)	/* wordselect master bit */
+#define CR_SCKP		(1 << 13)	/* I2Sclock polarity */
+#define CR_SWSP		(1 << 12)	/* LRCK polarity */
+#define CR_SPDP		(1 << 11)
+#define CR_SDTA		(1 << 10)	/* i2s alignment (msb/lsb) */
+#define CR_PDTA		(1 << 9)	/* fifo data alignment */
+#define CR_DEL		(1 << 8)	/* delay data by 1 i2sclk */
+#define CR_BREN		(1 << 7)	/* clock gating in burst mode */
+#define CR_CKDIV_SHIFT	4
+#define CR_CKDIV_MASK	(7 << CR_CKDIV_SHIFT)	/* bitclock divider */
+#define CR_MUTE		(1 << 3)	/* SSI mute */
+#define CR_CPEN		(1 << 2)	/* compressed mode */
+#define CR_TRMD		(1 << 1)	/* transmit/receive select */
+#define CR_EN		(1 << 0)	/* enable SSI */
+
+#define SSIREG(reg)	(*(unsigned long *)(ssi->mmio + (reg)))
+
+struct ssi_priv {
+	unsigned long mmio;
+	unsigned long sysclk;
+	int inuse;
+} ssi_cpu_data[] = {
+#if defined(CONFIG_CPU_SUBTYPE_SH7760)
+	{
+		.mmio	= 0xFE680000,
+	},
+	{
+		.mmio	= 0xFE690000,
+	},
+#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
+	{
+		.mmio	= 0xFFE70000,
+	},
+#else
+#error "Unsupported SuperH SoC"
+#endif
+};
+
+/*
+ * track usage of the SSI; it is simplex-only so prevent attempts of
+ * concurrent playback + capture. FIXME: any locking required?
+ */
+static int ssi_startup(struct snd_pcm_substream *substream,
+		       struct snd_soc_dai *dai)
+{
+	struct ssi_priv *ssi = &ssi_cpu_data[dai->id];
+	if (ssi->inuse) {
+		pr_debug("ssi: already in use!\n");
+		return -EBUSY;
+	} else
+		ssi->inuse = 1;
+	return 0;
+}
+
+static void ssi_shutdown(struct snd_pcm_substream *substream,
+			 struct snd_soc_dai *dai)
+{
+	struct ssi_priv *ssi = &ssi_cpu_data[dai->id];
+
+	ssi->inuse = 0;
+}
+
+static int ssi_trigger(struct snd_pcm_substream *substream, int cmd,
+		       struct snd_soc_dai *dai)
+{
+	struct ssi_priv *ssi = &ssi_cpu_data[dai->id];
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+		SSIREG(SSICR) |= CR_DMAEN | CR_EN;
+		break;
+	case SNDRV_PCM_TRIGGER_STOP:
+		SSIREG(SSICR) &= ~(CR_DMAEN | CR_EN);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int ssi_hw_params(struct snd_pcm_substream *substream,
+			 struct snd_pcm_hw_params *params,
+			 struct snd_soc_dai *dai)
+{
+	struct ssi_priv *ssi = &ssi_cpu_data[dai->id];
+	unsigned long ssicr = SSIREG(SSICR);
+	unsigned int bits, channels, swl, recv, i;
+
+	channels = params_channels(params);
+	bits = params->msbits;
+	recv = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ? 0 : 1;
+
+	pr_debug("ssi_hw_params() enter\nssicr was    %08lx\n", ssicr);
+	pr_debug("bits: %u channels: %u\n", bits, channels);
+
+	ssicr &= ~(CR_TRMD | CR_CHNL_MASK | CR_DWL_MASK | CR_PDTA |
+		   CR_SWL_MASK);
+
+	/* direction (send/receive) */
+	if (!recv)
+		ssicr |= CR_TRMD;	/* transmit */
+
+	/* channels */
+	if ((channels < 2) || (channels > 8) || (channels & 1)) {
+		pr_debug("ssi: invalid number of channels\n");
+		return -EINVAL;
+	}
+	ssicr |= ((channels >> 1) - 1) << CR_CHNL_SHIFT;
+
+	/* DATA WORD LENGTH (DWL): databits in audio sample */
+	i = 0;
+	switch (bits) {
+	case 32: ++i;
+	case 24: ++i;
+	case 22: ++i;
+	case 20: ++i;
+	case 18: ++i;
+	case 16: ++i;
+		 ssicr |= i << CR_DWL_SHIFT;
+	case 8:	 break;
+	default:
+		pr_debug("ssi: invalid sample width\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * SYSTEM WORD LENGTH: size in bits of half a frame over the I2S
+	 * wires. This is usually bits_per_sample x channels/2;  i.e. in
+	 * Stereo mode  the SWL equals DWL.  SWL can  be bigger than the
+	 * product of (channels_per_slot x samplebits), e.g.  for codecs
+	 * like the AD1939 which  only accept 32bit wide TDM slots.  For
+	 * "standard" I2S operation we set SWL = chans / 2 * DWL here.
+	 * Waiting for ASoC to get TDM support ;-)
+	 */
+	if ((bits > 16) && (bits <= 24)) {
+		bits = 24;	/* these are padded by the SSI */
+		/*ssicr |= CR_PDTA;*/ /* cpu/data endianness ? */
+	}
+	i = 0;
+	swl = (bits * channels) / 2;
+	switch (swl) {
+	case 256: ++i;
+	case 128: ++i;
+	case 64:  ++i;
+	case 48:  ++i;
+	case 32:  ++i;
+	case 16:  ++i;
+		  ssicr |= i << CR_SWL_SHIFT;
+	case 8:   break;
+	default:
+		pr_debug("ssi: invalid system word length computed\n");
+		return -EINVAL;
+	}
+
+	SSIREG(SSICR) = ssicr;
+
+	pr_debug("ssi_hw_params() leave\nssicr is now %08lx\n", ssicr);
+	return 0;
+}
+
+static int ssi_set_sysclk(struct snd_soc_dai *cpu_dai, int clk_id,
+			  unsigned int freq, int dir)
+{
+	struct ssi_priv *ssi = &ssi_cpu_data[cpu_dai->id];
+
+	ssi->sysclk = freq;
+
+	return 0;
+}
+
+/*
+ * This divider is used to generate the SSI_SCK (I2S bitclock) from the
+ * clock at the HAC_BIT_CLK ("oversampling clock") pin.
+ */
+static int ssi_set_clkdiv(struct snd_soc_dai *dai, int did, int div)
+{
+	struct ssi_priv *ssi = &ssi_cpu_data[dai->id];
+	unsigned long ssicr;
+	int i;
+
+	i = 0;
+	ssicr = SSIREG(SSICR) & ~CR_CKDIV_MASK;
+	switch (div) {
+	case 16: ++i;
+	case 8:  ++i;
+	case 4:  ++i;
+	case 2:  ++i;
+		 SSIREG(SSICR) = ssicr | (i << CR_CKDIV_SHIFT);
+	case 1:  break;
+	default:
+		pr_debug("ssi: invalid sck divider %d\n", div);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int ssi_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
+{
+	struct ssi_priv *ssi = &ssi_cpu_data[dai->id];
+	unsigned long ssicr = SSIREG(SSICR);
+
+	pr_debug("ssi_set_fmt()\nssicr was    0x%08lx\n", ssicr);
+
+	ssicr &= ~(CR_DEL | CR_PDTA | CR_BREN | CR_SWSP | CR_SCKP |
+		   CR_SWS_MASTER | CR_SCK_MASTER);
+
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_I2S:
+		break;
+	case SND_SOC_DAIFMT_RIGHT_J:
+		ssicr |= CR_DEL | CR_PDTA;
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		ssicr |= CR_DEL;
+		break;
+	default:
+		pr_debug("ssi: unsupported format\n");
+		return -EINVAL;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_CLOCK_MASK) {
+	case SND_SOC_DAIFMT_CONT:
+		break;
+	case SND_SOC_DAIFMT_GATED:
+		ssicr |= CR_BREN;
+		break;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_NB_NF:
+		ssicr |= CR_SCKP;	/* sample data at low clkedge */
+		break;
+	case SND_SOC_DAIFMT_NB_IF:
+		ssicr |= CR_SCKP | CR_SWSP;
+		break;
+	case SND_SOC_DAIFMT_IB_NF:
+		break;
+	case SND_SOC_DAIFMT_IB_IF:
+		ssicr |= CR_SWSP;	/* word select starts low */
+		break;
+	default:
+		pr_debug("ssi: invalid inversion\n");
+		return -EINVAL;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBM_CFM:
+		break;
+	case SND_SOC_DAIFMT_CBS_CFM:
+		ssicr |= CR_SCK_MASTER;
+		break;
+	case SND_SOC_DAIFMT_CBM_CFS:
+		ssicr |= CR_SWS_MASTER;
+		break;
+	case SND_SOC_DAIFMT_CBS_CFS:
+		ssicr |= CR_SWS_MASTER | CR_SCK_MASTER;
+		break;
+	default:
+		pr_debug("ssi: invalid master/slave configuration\n");
+		return -EINVAL;
+	}
+
+	SSIREG(SSICR) = ssicr;
+	pr_debug("ssi_set_fmt() leave\nssicr is now 0x%08lx\n", ssicr);
+
+	return 0;
+}
+
+/* the SSI depends on an external clocksource (at HAC_BIT_CLK) even in
+ * Master mode,  so really this is board specific;  the SSI can do any
+ * rate with the right bitclk and divider settings.
+ */
+#define SSI_RATES	\
+	SNDRV_PCM_RATE_8000_192000
+
+/* the SSI can do 8-32 bit samples, with 8 possible channels */
+#define SSI_FMTS	\
+	(SNDRV_PCM_FMTBIT_S8      | SNDRV_PCM_FMTBIT_U8      |	\
+	 SNDRV_PCM_FMTBIT_S16_LE  | SNDRV_PCM_FMTBIT_U16_LE  |	\
+	 SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_U20_3LE |	\
+	 SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_U24_3LE |	\
+	 SNDRV_PCM_FMTBIT_S32_LE  | SNDRV_PCM_FMTBIT_U32_LE)
+
+static const struct snd_soc_dai_ops ssi_dai_ops = {
+	.startup	= ssi_startup,
+	.shutdown	= ssi_shutdown,
+	.trigger	= ssi_trigger,
+	.hw_params	= ssi_hw_params,
+	.set_sysclk	= ssi_set_sysclk,
+	.set_clkdiv	= ssi_set_clkdiv,
+	.set_fmt	= ssi_set_fmt,
+};
+
+static struct snd_soc_dai_driver sh4_ssi_dai[] = {
+{
+	.name			= "ssi-dai.0",
+	.playback = {
+		.rates		= SSI_RATES,
+		.formats	= SSI_FMTS,
+		.channels_min	= 2,
+		.channels_max	= 8,
+	},
+	.capture = {
+		.rates		= SSI_RATES,
+		.formats	= SSI_FMTS,
+		.channels_min	= 2,
+		.channels_max	= 8,
+	},
+	.ops = &ssi_dai_ops,
+},
+#ifdef CONFIG_CPU_SUBTYPE_SH7760
+{
+	.name			= "ssi-dai.1",
+	.playback = {
+		.rates		= SSI_RATES,
+		.formats	= SSI_FMTS,
+		.channels_min	= 2,
+		.channels_max	= 8,
+	},
+	.capture = {
+		.rates		= SSI_RATES,
+		.formats	= SSI_FMTS,
+		.channels_min	= 2,
+		.channels_max	= 8,
+	},
+	.ops = &ssi_dai_ops,
+},
+#endif
+};
+
+static const struct snd_soc_component_driver sh4_ssi_component = {
+	.name		= "sh4-ssi",
+};
+
+static int sh4_soc_dai_probe(struct platform_device *pdev)
+{
+	return snd_soc_register_component(&pdev->dev, &sh4_ssi_component,
+					  sh4_ssi_dai, ARRAY_SIZE(sh4_ssi_dai));
+}
+
+static int sh4_soc_dai_remove(struct platform_device *pdev)
+{
+	snd_soc_unregister_component(&pdev->dev);
+	return 0;
+}
+
+static struct platform_driver sh4_ssi_driver = {
+	.driver = {
+			.name = "sh4-ssi-dai",
+	},
+
+	.probe = sh4_soc_dai_probe,
+	.remove = sh4_soc_dai_remove,
+};
+
+module_platform_driver(sh4_ssi_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("SuperH onchip SSI (I2S) audio driver");
+MODULE_AUTHOR("Manuel Lauss <mano@roarinelk.homelinux.net>");