Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

1 files changed, 241 insertions, 0 deletions

diff --git a/kernel/sound/soc/samsung/smdk_wm8580.c b/kernel/sound/soc/samsung/smdk_wm8580.c
new file mode 100644
index 000000000..548bfd993
--- /dev/null
+++ b/kernel/sound/soc/samsung/smdk_wm8580.c
@@ -0,0 +1,241 @@
+/*
+ *  smdk_wm8580.c
+ *
+ *  Copyright (c) 2009 Samsung Electronics Co. Ltd
+ *  Author: Jaswinder Singh <jassisinghbrar@gmail.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#include <linux/module.h>
+#include <sound/soc.h>
+#include <sound/pcm_params.h>
+
+#include <asm/mach-types.h>
+
+#include "../codecs/wm8580.h"
+#include "i2s.h"
+
+/*
+ * Default CFG switch settings to use this driver:
+ *
+ *   SMDK6410: Set CFG1 1-3 Off, CFG2 1-4 On
+ */
+
+/* SMDK has a 12MHZ crystal attached to WM8580 */
+#define SMDK_WM8580_FREQ 12000000
+
+static int smdk_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	unsigned int pll_out;
+	int bfs, rfs, ret;
+
+	switch (params_width(params)) {
+	case 8:
+		bfs = 16;
+		break;
+	case 16:
+		bfs = 32;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* The Fvco for WM8580 PLLs must fall within [90,100]MHz.
+	 * This criterion can't be met if we request PLL output
+	 * as {8000x256, 64000x256, 11025x256}Hz.
+	 * As a wayout, we rather change rfs to a minimum value that
+	 * results in (params_rate(params) * rfs), and itself, acceptable
+	 * to both - the CODEC and the CPU.
+	 */
+	switch (params_rate(params)) {
+	case 16000:
+	case 22050:
+	case 32000:
+	case 44100:
+	case 48000:
+	case 88200:
+	case 96000:
+		rfs = 256;
+		break;
+	case 64000:
+		rfs = 384;
+		break;
+	case 8000:
+	case 11025:
+		rfs = 512;
+		break;
+	default:
+		return -EINVAL;
+	}
+	pll_out = params_rate(params) * rfs;
+
+	/* Set WM8580 to drive MCLK from its PLLA */
+	ret = snd_soc_dai_set_clkdiv(codec_dai, WM8580_MCLK,
+					WM8580_CLKSRC_PLLA);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_soc_dai_set_pll(codec_dai, WM8580_PLLA, 0,
+					SMDK_WM8580_FREQ, pll_out);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_soc_dai_set_sysclk(codec_dai, WM8580_CLKSRC_PLLA,
+				     pll_out, SND_SOC_CLOCK_IN);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+/*
+ * SMDK WM8580 DAI operations.
+ */
+static struct snd_soc_ops smdk_ops = {
+	.hw_params = smdk_hw_params,
+};
+
+/* SMDK Playback widgets */
+static const struct snd_soc_dapm_widget smdk_wm8580_dapm_widgets[] = {
+	SND_SOC_DAPM_HP("Front", NULL),
+	SND_SOC_DAPM_HP("Center+Sub", NULL),
+	SND_SOC_DAPM_HP("Rear", NULL),
+
+	SND_SOC_DAPM_MIC("MicIn", NULL),
+	SND_SOC_DAPM_LINE("LineIn", NULL),
+};
+
+/* SMDK-PAIFTX connections */
+static const struct snd_soc_dapm_route smdk_wm8580_audio_map[] = {
+	/* MicIn feeds AINL */
+	{"AINL", NULL, "MicIn"},
+
+	/* LineIn feeds AINL/R */
+	{"AINL", NULL, "LineIn"},
+	{"AINR", NULL, "LineIn"},
+
+	/* Front Left/Right are fed VOUT1L/R */
+	{"Front", NULL, "VOUT1L"},
+	{"Front", NULL, "VOUT1R"},
+
+	/* Center/Sub are fed VOUT2L/R */
+	{"Center+Sub", NULL, "VOUT2L"},
+	{"Center+Sub", NULL, "VOUT2R"},
+
+	/* Rear Left/Right are fed VOUT3L/R */
+	{"Rear", NULL, "VOUT3L"},
+	{"Rear", NULL, "VOUT3R"},
+};
+
+static int smdk_wm8580_init_paiftx(struct snd_soc_pcm_runtime *rtd)
+{
+	/* Enabling the microphone requires the fitting of a 0R
+	 * resistor to connect the line from the microphone jack.
+	 */
+	snd_soc_dapm_disable_pin(&rtd->card->dapm, "MicIn");
+
+	return 0;
+}
+
+enum {
+	PRI_PLAYBACK = 0,
+	PRI_CAPTURE,
+	SEC_PLAYBACK,
+};
+
+#define SMDK_DAI_FMT (SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | \
+	SND_SOC_DAIFMT_CBM_CFM)
+
+static struct snd_soc_dai_link smdk_dai[] = {
+	[PRI_PLAYBACK] = { /* Primary Playback i/f */
+		.name = "WM8580 PAIF RX",
+		.stream_name = "Playback",
+		.cpu_dai_name = "samsung-i2s.0",
+		.codec_dai_name = "wm8580-hifi-playback",
+		.platform_name = "samsung-i2s.0",
+		.codec_name = "wm8580.0-001b",
+		.dai_fmt = SMDK_DAI_FMT,
+		.ops = &smdk_ops,
+	},
+	[PRI_CAPTURE] = { /* Primary Capture i/f */
+		.name = "WM8580 PAIF TX",
+		.stream_name = "Capture",
+		.cpu_dai_name = "samsung-i2s.0",
+		.codec_dai_name = "wm8580-hifi-capture",
+		.platform_name = "samsung-i2s.0",
+		.codec_name = "wm8580.0-001b",
+		.dai_fmt = SMDK_DAI_FMT,
+		.init = smdk_wm8580_init_paiftx,
+		.ops = &smdk_ops,
+	},
+	[SEC_PLAYBACK] = { /* Sec_Fifo Playback i/f */
+		.name = "Sec_FIFO TX",
+		.stream_name = "Playback",
+		.cpu_dai_name = "samsung-i2s-sec",
+		.codec_dai_name = "wm8580-hifi-playback",
+		.platform_name = "samsung-i2s-sec",
+		.codec_name = "wm8580.0-001b",
+		.dai_fmt = SMDK_DAI_FMT,
+		.ops = &smdk_ops,
+	},
+};
+
+static struct snd_soc_card smdk = {
+	.name = "SMDK-I2S",
+	.owner = THIS_MODULE,
+	.dai_link = smdk_dai,
+	.num_links = 2,
+
+	.dapm_widgets = smdk_wm8580_dapm_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(smdk_wm8580_dapm_widgets),
+	.dapm_routes = smdk_wm8580_audio_map,
+	.num_dapm_routes = ARRAY_SIZE(smdk_wm8580_audio_map),
+};
+
+static struct platform_device *smdk_snd_device;
+
+static int __init smdk_audio_init(void)
+{
+	int ret;
+	char *str;
+
+	if (machine_is_smdkc100()
+			|| machine_is_smdkv210() || machine_is_smdkc110()) {
+		smdk.num_links = 3;
+	} else if (machine_is_smdk6410()) {
+		str = (char *)smdk_dai[PRI_PLAYBACK].cpu_dai_name;
+		str[strlen(str) - 1] = '2';
+		str = (char *)smdk_dai[PRI_CAPTURE].cpu_dai_name;
+		str[strlen(str) - 1] = '2';
+	}
+
+	smdk_snd_device = platform_device_alloc("soc-audio", -1);
+	if (!smdk_snd_device)
+		return -ENOMEM;
+
+	platform_set_drvdata(smdk_snd_device, &smdk);
+	ret = platform_device_add(smdk_snd_device);
+
+	if (ret)
+		platform_device_put(smdk_snd_device);
+
+	return ret;
+}
+module_init(smdk_audio_init);
+
+static void __exit smdk_audio_exit(void)
+{
+	platform_device_unregister(smdk_snd_device);
+}
+module_exit(smdk_audio_exit);
+
+MODULE_AUTHOR("Jaswinder Singh, jassisinghbrar@gmail.com");
+MODULE_DESCRIPTION("ALSA SoC SMDK WM8580");
+MODULE_LICENSE("GPL");