Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

1 files changed, 123 insertions, 0 deletions

diff --git a/kernel/sound/soc/omap/Kconfig b/kernel/sound/soc/omap/Kconfig
new file mode 100644
index 000000000..6768e4f7d
--- /dev/null
+++ b/kernel/sound/soc/omap/Kconfig
@@ -0,0 +1,123 @@
+config SND_OMAP_SOC
+	tristate "SoC Audio for the Texas Instruments OMAP chips"
+	depends on (ARCH_OMAP && DMA_OMAP) || (ARM && COMPILE_TEST)
+	select SND_DMAENGINE_PCM
+
+config SND_OMAP_SOC_DMIC
+	tristate
+
+config SND_OMAP_SOC_MCBSP
+	tristate
+
+config SND_OMAP_SOC_MCPDM
+	tristate
+
+config SND_OMAP_SOC_HDMI_AUDIO
+	tristate "HDMI audio support for OMAP4+ based SoCs"
+	depends on SND_OMAP_SOC
+	help
+	  For HDMI audio to work OMAPDSS HDMI support should be
+	  enabled.
+	  The hdmi audio driver implements cpu-dai component using the
+	  callbacks provided by OMAPDSS and registers the component
+	  under DSS HDMI device. Omap-pcm is registered for platform
+	  component also under DSS HDMI device. Dummy codec is used as
+	  as codec component. The hdmi audio driver implements also
+	  the card and registers it under its own platform device.
+	  The device for the dirver is registered by OMAPDSS hdmi
+	  driver.
+
+config SND_OMAP_SOC_N810
+	tristate "SoC Audio support for Nokia N810"
+	depends on SND_OMAP_SOC && MACH_NOKIA_N810 && I2C
+	depends on OMAP_MUX
+	select SND_OMAP_SOC_MCBSP
+	select SND_SOC_TLV320AIC3X
+	help
+	  Say Y if you want to add support for SoC audio on Nokia N810.
+
+config SND_OMAP_SOC_RX51
+	tristate "SoC Audio support for Nokia N900 (RX-51)"
+	depends on SND_OMAP_SOC && ARM && I2C
+	select SND_OMAP_SOC_MCBSP
+	select SND_SOC_TLV320AIC3X
+	select SND_SOC_TPA6130A2
+	depends on GPIOLIB
+	help
+	  Say Y if you want to add support for SoC audio on Nokia N900
+	  cellphone.
+
+config SND_OMAP_SOC_AMS_DELTA
+	tristate "SoC Audio support for Amstrad E3 (Delta) videophone"
+	depends on SND_OMAP_SOC && MACH_AMS_DELTA && TTY
+	select SND_OMAP_SOC_MCBSP
+	select SND_SOC_CX20442
+	help
+	  Say Y  if you want to add support  for SoC audio device  connected to
+	  a handset and a speakerphone found on Amstrad E3 (Delta) videophone.
+
+	  Note that in order to get those devices fully supported,  you have to
+	  build  the kernel  with  standard  serial port  driver  included  and
+	  configured for at least 4 ports.  Then, from userspace, you must load
+	  a line discipline #19 on the modem (ttyS3) serial line.  The simplest
+	  way to achieve this is to install util-linux-ng  and use the included
+	  ldattach  utility.  This  can be  started  automatically  from  udev,
+	  a simple rule like this one should do the trick (it does for me):
+	  	ACTION=="add", KERNEL=="controlC0", \
+				RUN+="/usr/sbin/ldattach 19 /dev/ttyS3"
+
+config SND_OMAP_SOC_OSK5912
+	tristate "SoC Audio support for omap osk5912"
+	depends on SND_OMAP_SOC && MACH_OMAP_OSK && I2C
+	select SND_OMAP_SOC_MCBSP
+	select SND_SOC_TLV320AIC23_I2C
+	help
+	  Say Y if you want to add support for SoC audio on osk5912.
+
+config SND_OMAP_SOC_AM3517EVM
+	tristate "SoC Audio support for OMAP3517 / AM3517 EVM"
+	depends on SND_OMAP_SOC && MACH_OMAP3517EVM && I2C
+	select SND_OMAP_SOC_MCBSP
+	select SND_SOC_TLV320AIC23_I2C
+	help
+	  Say Y if you want to add support for SoC audio on the OMAP3517 / AM3517
+	  EVM.
+
+config SND_OMAP_SOC_OMAP_TWL4030
+	tristate "SoC Audio support for TI SoC based boards with twl4030 codec"
+	depends on TWL4030_CORE && SND_OMAP_SOC
+	select SND_OMAP_SOC_MCBSP
+	select SND_SOC_TWL4030
+	help
+	  Say Y if you want to add support for SoC audio on TI SoC based boards
+	  using twl4030 as c codec. This driver currently supports:
+	  - Beagleboard or Devkit8000
+	  - Gumstix Overo or CompuLab CM-T35/CM-T3730
+	  - IGEP v2
+	  - OMAP3EVM
+	  - SDP3430
+	  - Zoom2
+
+config SND_OMAP_SOC_OMAP_ABE_TWL6040
+	tristate "SoC Audio support for OMAP boards using ABE and twl6040 codec"
+	depends on TWL6040_CORE && SND_OMAP_SOC && (ARCH_OMAP4 || SOC_OMAP5 || COMPILE_TEST)
+	select SND_OMAP_SOC_DMIC
+	select SND_OMAP_SOC_MCPDM
+	select SND_SOC_TWL6040
+	select SND_SOC_DMIC
+	select COMMON_CLK_PALMAS if MFD_PALMAS
+	help
+	  Say Y if you want to add support for SoC audio on OMAP boards using
+	  ABE and twl6040 codec. This driver currently supports:
+	  - SDP4430/Blaze boards
+	  - PandaBoard (4430)
+	  - PandaBoardES (4460)
+	  - omap5-uevm (5432)
+
+config SND_OMAP_SOC_OMAP3_PANDORA
+	tristate "SoC Audio support for OMAP3 Pandora"
+	depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP3_PANDORA
+	select SND_OMAP_SOC_MCBSP
+	select SND_SOC_TWL4030
+	help
+	  Say Y if you want to add support for SoC audio on the OMAP3 Pandora.