Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

1 files changed, 1485 insertions, 0 deletions

diff --git a/kernel/sound/soc/fsl/fsl_ssi.c b/kernel/sound/soc/fsl/fsl_ssi.c
new file mode 100644
index 000000000..0d4880421
--- /dev/null
+++ b/kernel/sound/soc/fsl/fsl_ssi.c
@@ -0,0 +1,1485 @@
+/*
+ * Freescale SSI ALSA SoC Digital Audio Interface (DAI) driver
+ *
+ * Author: Timur Tabi <timur@freescale.com>
+ *
+ * Copyright 2007-2010 Freescale Semiconductor, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ *
+ *
+ * Some notes why imx-pcm-fiq is used instead of DMA on some boards:
+ *
+ * The i.MX SSI core has some nasty limitations in AC97 mode. While most
+ * sane processor vendors have a FIFO per AC97 slot, the i.MX has only
+ * one FIFO which combines all valid receive slots. We cannot even select
+ * which slots we want to receive. The WM9712 with which this driver
+ * was developed with always sends GPIO status data in slot 12 which
+ * we receive in our (PCM-) data stream. The only chance we have is to
+ * manually skip this data in the FIQ handler. With sampling rates different
+ * from 48000Hz not every frame has valid receive data, so the ratio
+ * between pcm data and GPIO status data changes. Our FIQ handler is not
+ * able to handle this, hence this driver only works with 48000Hz sampling
+ * rate.
+ * Reading and writing AC97 registers is another challenge. The core
+ * provides us status bits when the read register is updated with *another*
+ * value. When we read the same register two times (and the register still
+ * contains the same value) these status bits are not set. We work
+ * around this by not polling these bits but only wait a fixed delay.
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/initval.h>
+#include <sound/soc.h>
+#include <sound/dmaengine_pcm.h>
+
+#include "fsl_ssi.h"
+#include "imx-pcm.h"
+
+/**
+ * FSLSSI_I2S_RATES: sample rates supported by the I2S
+ *
+ * This driver currently only supports the SSI running in I2S slave mode,
+ * which means the codec determines the sample rate.  Therefore, we tell
+ * ALSA that we support all rates and let the codec driver decide what rates
+ * are really supported.
+ */
+#define FSLSSI_I2S_RATES SNDRV_PCM_RATE_CONTINUOUS
+
+/**
+ * FSLSSI_I2S_FORMATS: audio formats supported by the SSI
+ *
+ * The SSI has a limitation in that the samples must be in the same byte
+ * order as the host CPU.  This is because when multiple bytes are written
+ * to the STX register, the bytes and bits must be written in the same
+ * order.  The STX is a shift register, so all the bits need to be aligned
+ * (bit-endianness must match byte-endianness).  Processors typically write
+ * the bits within a byte in the same order that the bytes of a word are
+ * written in.  So if the host CPU is big-endian, then only big-endian
+ * samples will be written to STX properly.
+ */
+#ifdef __BIG_ENDIAN
+#define FSLSSI_I2S_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_BE | \
+	 SNDRV_PCM_FMTBIT_S18_3BE | SNDRV_PCM_FMTBIT_S20_3BE | \
+	 SNDRV_PCM_FMTBIT_S24_3BE | SNDRV_PCM_FMTBIT_S24_BE)
+#else
+#define FSLSSI_I2S_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE | \
+	 SNDRV_PCM_FMTBIT_S18_3LE | SNDRV_PCM_FMTBIT_S20_3LE | \
+	 SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S24_LE)
+#endif
+
+#define FSLSSI_SIER_DBG_RX_FLAGS (CCSR_SSI_SIER_RFF0_EN | \
+		CCSR_SSI_SIER_RLS_EN | CCSR_SSI_SIER_RFS_EN | \
+		CCSR_SSI_SIER_ROE0_EN | CCSR_SSI_SIER_RFRC_EN)
+#define FSLSSI_SIER_DBG_TX_FLAGS (CCSR_SSI_SIER_TFE0_EN | \
+		CCSR_SSI_SIER_TLS_EN | CCSR_SSI_SIER_TFS_EN | \
+		CCSR_SSI_SIER_TUE0_EN | CCSR_SSI_SIER_TFRC_EN)
+
+enum fsl_ssi_type {
+	FSL_SSI_MCP8610,
+	FSL_SSI_MX21,
+	FSL_SSI_MX35,
+	FSL_SSI_MX51,
+};
+
+struct fsl_ssi_reg_val {
+	u32 sier;
+	u32 srcr;
+	u32 stcr;
+	u32 scr;
+};
+
+struct fsl_ssi_rxtx_reg_val {
+	struct fsl_ssi_reg_val rx;
+	struct fsl_ssi_reg_val tx;
+};
+static const struct regmap_config fsl_ssi_regconfig = {
+	.max_register = CCSR_SSI_SACCDIS,
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.val_format_endian = REGMAP_ENDIAN_NATIVE,
+};
+
+struct fsl_ssi_soc_data {
+	bool imx;
+	bool offline_config;
+	u32 sisr_write_mask;
+};
+
+/**
+ * fsl_ssi_private: per-SSI private data
+ *
+ * @reg: Pointer to the regmap registers
+ * @irq: IRQ of this SSI
+ * @cpu_dai_drv: CPU DAI driver for this device
+ *
+ * @dai_fmt: DAI configuration this device is currently used with
+ * @i2s_mode: i2s and network mode configuration of the device. Is used to
+ * switch between normal and i2s/network mode
+ * mode depending on the number of channels
+ * @use_dma: DMA is used or FIQ with stream filter
+ * @use_dual_fifo: DMA with support for both FIFOs used
+ * @fifo_deph: Depth of the SSI FIFOs
+ * @rxtx_reg_val: Specific register settings for receive/transmit configuration
+ *
+ * @clk: SSI clock
+ * @baudclk: SSI baud clock for master mode
+ * @baudclk_streams: Active streams that are using baudclk
+ * @bitclk_freq: bitclock frequency set by .set_dai_sysclk
+ *
+ * @dma_params_tx: DMA transmit parameters
+ * @dma_params_rx: DMA receive parameters
+ * @ssi_phys: physical address of the SSI registers
+ *
+ * @fiq_params: FIQ stream filtering parameters
+ *
+ * @pdev: Pointer to pdev used for deprecated fsl-ssi sound card
+ *
+ * @dbg_stats: Debugging statistics
+ *
+ * @soc: SoC specifc data
+ */
+struct fsl_ssi_private {
+	struct regmap *regs;
+	int irq;
+	struct snd_soc_dai_driver cpu_dai_drv;
+
+	unsigned int dai_fmt;
+	u8 i2s_mode;
+	bool use_dma;
+	bool use_dual_fifo;
+	bool has_ipg_clk_name;
+	unsigned int fifo_depth;
+	struct fsl_ssi_rxtx_reg_val rxtx_reg_val;
+
+	struct clk *clk;
+	struct clk *baudclk;
+	unsigned int baudclk_streams;
+	unsigned int bitclk_freq;
+
+	/* DMA params */
+	struct snd_dmaengine_dai_dma_data dma_params_tx;
+	struct snd_dmaengine_dai_dma_data dma_params_rx;
+	dma_addr_t ssi_phys;
+
+	/* params for non-dma FIQ stream filtered mode */
+	struct imx_pcm_fiq_params fiq_params;
+
+	/* Used when using fsl-ssi as sound-card. This is only used by ppc and
+	 * should be replaced with simple-sound-card. */
+	struct platform_device *pdev;
+
+	struct fsl_ssi_dbg dbg_stats;
+
+	const struct fsl_ssi_soc_data *soc;
+};
+
+/*
+ * imx51 and later SoCs have a slightly different IP that allows the
+ * SSI configuration while the SSI unit is running.
+ *
+ * More important, it is necessary on those SoCs to configure the
+ * sperate TX/RX DMA bits just before starting the stream
+ * (fsl_ssi_trigger). The SDMA unit has to be configured before fsl_ssi
+ * sends any DMA requests to the SDMA unit, otherwise it is not defined
+ * how the SDMA unit handles the DMA request.
+ *
+ * SDMA units are present on devices starting at imx35 but the imx35
+ * reference manual states that the DMA bits should not be changed
+ * while the SSI unit is running (SSIEN). So we support the necessary
+ * online configuration of fsl-ssi starting at imx51.
+ */
+
+static struct fsl_ssi_soc_data fsl_ssi_mpc8610 = {
+	.imx = false,
+	.offline_config = true,
+	.sisr_write_mask = CCSR_SSI_SISR_RFRC | CCSR_SSI_SISR_TFRC |
+			CCSR_SSI_SISR_ROE0 | CCSR_SSI_SISR_ROE1 |
+			CCSR_SSI_SISR_TUE0 | CCSR_SSI_SISR_TUE1,
+};
+
+static struct fsl_ssi_soc_data fsl_ssi_imx21 = {
+	.imx = true,
+	.offline_config = true,
+	.sisr_write_mask = 0,
+};
+
+static struct fsl_ssi_soc_data fsl_ssi_imx35 = {
+	.imx = true,
+	.offline_config = true,
+	.sisr_write_mask = CCSR_SSI_SISR_RFRC | CCSR_SSI_SISR_TFRC |
+			CCSR_SSI_SISR_ROE0 | CCSR_SSI_SISR_ROE1 |
+			CCSR_SSI_SISR_TUE0 | CCSR_SSI_SISR_TUE1,
+};
+
+static struct fsl_ssi_soc_data fsl_ssi_imx51 = {
+	.imx = true,
+	.offline_config = false,
+	.sisr_write_mask = CCSR_SSI_SISR_ROE0 | CCSR_SSI_SISR_ROE1 |
+		CCSR_SSI_SISR_TUE0 | CCSR_SSI_SISR_TUE1,
+};
+
+static const struct of_device_id fsl_ssi_ids[] = {
+	{ .compatible = "fsl,mpc8610-ssi", .data = &fsl_ssi_mpc8610 },
+	{ .compatible = "fsl,imx51-ssi", .data = &fsl_ssi_imx51 },
+	{ .compatible = "fsl,imx35-ssi", .data = &fsl_ssi_imx35 },
+	{ .compatible = "fsl,imx21-ssi", .data = &fsl_ssi_imx21 },
+	{}
+};
+MODULE_DEVICE_TABLE(of, fsl_ssi_ids);
+
+static bool fsl_ssi_is_ac97(struct fsl_ssi_private *ssi_private)
+{
+	return !!(ssi_private->dai_fmt & SND_SOC_DAIFMT_AC97);
+}
+
+static bool fsl_ssi_is_i2s_master(struct fsl_ssi_private *ssi_private)
+{
+	return (ssi_private->dai_fmt & SND_SOC_DAIFMT_MASTER_MASK) ==
+		SND_SOC_DAIFMT_CBS_CFS;
+}
+
+static bool fsl_ssi_is_i2s_cbm_cfs(struct fsl_ssi_private *ssi_private)
+{
+	return (ssi_private->dai_fmt & SND_SOC_DAIFMT_MASTER_MASK) ==
+		SND_SOC_DAIFMT_CBM_CFS;
+}
+/**
+ * fsl_ssi_isr: SSI interrupt handler
+ *
+ * Although it's possible to use the interrupt handler to send and receive
+ * data to/from the SSI, we use the DMA instead.  Programming is more
+ * complicated, but the performance is much better.
+ *
+ * This interrupt handler is used only to gather statistics.
+ *
+ * @irq: IRQ of the SSI device
+ * @dev_id: pointer to the ssi_private structure for this SSI device
+ */
+static irqreturn_t fsl_ssi_isr(int irq, void *dev_id)
+{
+	struct fsl_ssi_private *ssi_private = dev_id;
+	struct regmap *regs = ssi_private->regs;
+	__be32 sisr;
+	__be32 sisr2;
+
+	/* We got an interrupt, so read the status register to see what we
+	   were interrupted for.  We mask it with the Interrupt Enable register
+	   so that we only check for events that we're interested in.
+	 */
+	regmap_read(regs, CCSR_SSI_SISR, &sisr);
+
+	sisr2 = sisr & ssi_private->soc->sisr_write_mask;
+	/* Clear the bits that we set */
+	if (sisr2)
+		regmap_write(regs, CCSR_SSI_SISR, sisr2);
+
+	fsl_ssi_dbg_isr(&ssi_private->dbg_stats, sisr);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Enable/Disable all rx/tx config flags at once.
+ */
+static void fsl_ssi_rxtx_config(struct fsl_ssi_private *ssi_private,
+		bool enable)
+{
+	struct regmap *regs = ssi_private->regs;
+	struct fsl_ssi_rxtx_reg_val *vals = &ssi_private->rxtx_reg_val;
+
+	if (enable) {
+		regmap_update_bits(regs, CCSR_SSI_SIER,
+				vals->rx.sier | vals->tx.sier,
+				vals->rx.sier | vals->tx.sier);
+		regmap_update_bits(regs, CCSR_SSI_SRCR,
+				vals->rx.srcr | vals->tx.srcr,
+				vals->rx.srcr | vals->tx.srcr);
+		regmap_update_bits(regs, CCSR_SSI_STCR,
+				vals->rx.stcr | vals->tx.stcr,
+				vals->rx.stcr | vals->tx.stcr);
+	} else {
+		regmap_update_bits(regs, CCSR_SSI_SRCR,
+				vals->rx.srcr | vals->tx.srcr, 0);
+		regmap_update_bits(regs, CCSR_SSI_STCR,
+				vals->rx.stcr | vals->tx.stcr, 0);
+		regmap_update_bits(regs, CCSR_SSI_SIER,
+				vals->rx.sier | vals->tx.sier, 0);
+	}
+}
+
+/*
+ * Calculate the bits that have to be disabled for the current stream that is
+ * getting disabled. This keeps the bits enabled that are necessary for the
+ * second stream to work if 'stream_active' is true.
+ *
+ * Detailed calculation:
+ * These are the values that need to be active after disabling. For non-active
+ * second stream, this is 0:
+ *	vals_stream * !!stream_active
+ *
+ * The following computes the overall differences between the setup for the
+ * to-disable stream and the active stream, a simple XOR:
+ *	vals_disable ^ (vals_stream * !!(stream_active))
+ *
+ * The full expression adds a mask on all values we care about
+ */
+#define fsl_ssi_disable_val(vals_disable, vals_stream, stream_active) \
+	((vals_disable) & \
+	 ((vals_disable) ^ ((vals_stream) * (u32)!!(stream_active))))
+
+/*
+ * Enable/Disable a ssi configuration. You have to pass either
+ * ssi_private->rxtx_reg_val.rx or tx as vals parameter.
+ */
+static void fsl_ssi_config(struct fsl_ssi_private *ssi_private, bool enable,
+		struct fsl_ssi_reg_val *vals)
+{
+	struct regmap *regs = ssi_private->regs;
+	struct fsl_ssi_reg_val *avals;
+	int nr_active_streams;
+	u32 scr_val;
+	int keep_active;
+
+	regmap_read(regs, CCSR_SSI_SCR, &scr_val);
+
+	nr_active_streams = !!(scr_val & CCSR_SSI_SCR_TE) +
+				!!(scr_val & CCSR_SSI_SCR_RE);
+
+	if (nr_active_streams - 1 > 0)
+		keep_active = 1;
+	else
+		keep_active = 0;
+
+	/* Find the other direction values rx or tx which we do not want to
+	 * modify */
+	if (&ssi_private->rxtx_reg_val.rx == vals)
+		avals = &ssi_private->rxtx_reg_val.tx;
+	else
+		avals = &ssi_private->rxtx_reg_val.rx;
+
+	/* If vals should be disabled, start with disabling the unit */
+	if (!enable) {
+		u32 scr = fsl_ssi_disable_val(vals->scr, avals->scr,
+				keep_active);
+		regmap_update_bits(regs, CCSR_SSI_SCR, scr, 0);
+	}
+
+	/*
+	 * We are running on a SoC which does not support online SSI
+	 * reconfiguration, so we have to enable all necessary flags at once
+	 * even if we do not use them later (capture and playback configuration)
+	 */
+	if (ssi_private->soc->offline_config) {
+		if ((enable && !nr_active_streams) ||
+				(!enable && !keep_active))
+			fsl_ssi_rxtx_config(ssi_private, enable);
+
+		goto config_done;
+	}
+
+	/*
+	 * Configure single direction units while the SSI unit is running
+	 * (online configuration)
+	 */
+	if (enable) {
+		regmap_update_bits(regs, CCSR_SSI_SIER, vals->sier, vals->sier);
+		regmap_update_bits(regs, CCSR_SSI_SRCR, vals->srcr, vals->srcr);
+		regmap_update_bits(regs, CCSR_SSI_STCR, vals->stcr, vals->stcr);
+	} else {
+		u32 sier;
+		u32 srcr;
+		u32 stcr;
+
+		/*
+		 * Disabling the necessary flags for one of rx/tx while the
+		 * other stream is active is a little bit more difficult. We
+		 * have to disable only those flags that differ between both
+		 * streams (rx XOR tx) and that are set in the stream that is
+		 * disabled now. Otherwise we could alter flags of the other
+		 * stream
+		 */
+
+		/* These assignments are simply vals without bits set in avals*/
+		sier = fsl_ssi_disable_val(vals->sier, avals->sier,
+				keep_active);
+		srcr = fsl_ssi_disable_val(vals->srcr, avals->srcr,
+				keep_active);
+		stcr = fsl_ssi_disable_val(vals->stcr, avals->stcr,
+				keep_active);
+
+		regmap_update_bits(regs, CCSR_SSI_SRCR, srcr, 0);
+		regmap_update_bits(regs, CCSR_SSI_STCR, stcr, 0);
+		regmap_update_bits(regs, CCSR_SSI_SIER, sier, 0);
+	}
+
+config_done:
+	/* Enabling of subunits is done after configuration */
+	if (enable)
+		regmap_update_bits(regs, CCSR_SSI_SCR, vals->scr, vals->scr);
+}
+
+
+static void fsl_ssi_rx_config(struct fsl_ssi_private *ssi_private, bool enable)
+{
+	fsl_ssi_config(ssi_private, enable, &ssi_private->rxtx_reg_val.rx);
+}
+
+static void fsl_ssi_tx_config(struct fsl_ssi_private *ssi_private, bool enable)
+{
+	fsl_ssi_config(ssi_private, enable, &ssi_private->rxtx_reg_val.tx);
+}
+
+/*
+ * Setup rx/tx register values used to enable/disable the streams. These will
+ * be used later in fsl_ssi_config to setup the streams without the need to
+ * check for all different SSI modes.
+ */
+static void fsl_ssi_setup_reg_vals(struct fsl_ssi_private *ssi_private)
+{
+	struct fsl_ssi_rxtx_reg_val *reg = &ssi_private->rxtx_reg_val;
+
+	reg->rx.sier = CCSR_SSI_SIER_RFF0_EN;
+	reg->rx.srcr = CCSR_SSI_SRCR_RFEN0;
+	reg->rx.scr = 0;
+	reg->tx.sier = CCSR_SSI_SIER_TFE0_EN;
+	reg->tx.stcr = CCSR_SSI_STCR_TFEN0;
+	reg->tx.scr = 0;
+
+	if (!fsl_ssi_is_ac97(ssi_private)) {
+		reg->rx.scr = CCSR_SSI_SCR_SSIEN | CCSR_SSI_SCR_RE;
+		reg->rx.sier |= CCSR_SSI_SIER_RFF0_EN;
+		reg->tx.scr = CCSR_SSI_SCR_SSIEN | CCSR_SSI_SCR_TE;
+		reg->tx.sier |= CCSR_SSI_SIER_TFE0_EN;
+	}
+
+	if (ssi_private->use_dma) {
+		reg->rx.sier |= CCSR_SSI_SIER_RDMAE;
+		reg->tx.sier |= CCSR_SSI_SIER_TDMAE;
+	} else {
+		reg->rx.sier |= CCSR_SSI_SIER_RIE;
+		reg->tx.sier |= CCSR_SSI_SIER_TIE;
+	}
+
+	reg->rx.sier |= FSLSSI_SIER_DBG_RX_FLAGS;
+	reg->tx.sier |= FSLSSI_SIER_DBG_TX_FLAGS;
+}
+
+static void fsl_ssi_setup_ac97(struct fsl_ssi_private *ssi_private)
+{
+	struct regmap *regs = ssi_private->regs;
+
+	/*
+	 * Setup the clock control register
+	 */
+	regmap_write(regs, CCSR_SSI_STCCR,
+			CCSR_SSI_SxCCR_WL(17) | CCSR_SSI_SxCCR_DC(13));
+	regmap_write(regs, CCSR_SSI_SRCCR,
+			CCSR_SSI_SxCCR_WL(17) | CCSR_SSI_SxCCR_DC(13));
+
+	/*
+	 * Enable AC97 mode and startup the SSI
+	 */
+	regmap_write(regs, CCSR_SSI_SACNT,
+			CCSR_SSI_SACNT_AC97EN | CCSR_SSI_SACNT_FV);
+	regmap_write(regs, CCSR_SSI_SACCDIS, 0xff);
+	regmap_write(regs, CCSR_SSI_SACCEN, 0x300);
+
+	/*
+	 * Enable SSI, Transmit and Receive. AC97 has to communicate with the
+	 * codec before a stream is started.
+	 */
+	regmap_update_bits(regs, CCSR_SSI_SCR,
+			CCSR_SSI_SCR_SSIEN | CCSR_SSI_SCR_TE | CCSR_SSI_SCR_RE,
+			CCSR_SSI_SCR_SSIEN | CCSR_SSI_SCR_TE | CCSR_SSI_SCR_RE);
+
+	regmap_write(regs, CCSR_SSI_SOR, CCSR_SSI_SOR_WAIT(3));
+}
+
+/**
+ * fsl_ssi_startup: create a new substream
+ *
+ * This is the first function called when a stream is opened.
+ *
+ * If this is the first stream open, then grab the IRQ and program most of
+ * the SSI registers.
+ */
+static int fsl_ssi_startup(struct snd_pcm_substream *substream,
+			   struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct fsl_ssi_private *ssi_private =
+		snd_soc_dai_get_drvdata(rtd->cpu_dai);
+	int ret;
+
+	ret = clk_prepare_enable(ssi_private->clk);
+	if (ret)
+		return ret;
+
+	/* When using dual fifo mode, it is safer to ensure an even period
+	 * size. If appearing to an odd number while DMA always starts its
+	 * task from fifo0, fifo1 would be neglected at the end of each
+	 * period. But SSI would still access fifo1 with an invalid data.
+	 */
+	if (ssi_private->use_dual_fifo)
+		snd_pcm_hw_constraint_step(substream->runtime, 0,
+				SNDRV_PCM_HW_PARAM_PERIOD_SIZE, 2);
+
+	return 0;
+}
+
+/**
+ * fsl_ssi_shutdown: shutdown the SSI
+ *
+ */
+static void fsl_ssi_shutdown(struct snd_pcm_substream *substream,
+				struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct fsl_ssi_private *ssi_private =
+		snd_soc_dai_get_drvdata(rtd->cpu_dai);
+
+	clk_disable_unprepare(ssi_private->clk);
+
+}
+
+/**
+ * fsl_ssi_set_bclk - configure Digital Audio Interface bit clock
+ *
+ * Note: This function can be only called when using SSI as DAI master
+ *
+ * Quick instruction for parameters:
+ * freq: Output BCLK frequency = samplerate * 32 (fixed) * channels
+ * dir: SND_SOC_CLOCK_OUT -> TxBCLK, SND_SOC_CLOCK_IN -> RxBCLK.
+ */
+static int fsl_ssi_set_bclk(struct snd_pcm_substream *substream,
+		struct snd_soc_dai *cpu_dai,
+		struct snd_pcm_hw_params *hw_params)
+{
+	struct fsl_ssi_private *ssi_private = snd_soc_dai_get_drvdata(cpu_dai);
+	struct regmap *regs = ssi_private->regs;
+	int synchronous = ssi_private->cpu_dai_drv.symmetric_rates, ret;
+	u32 pm = 999, div2, psr, stccr, mask, afreq, factor, i;
+	unsigned long clkrate, baudrate, tmprate;
+	u64 sub, savesub = 100000;
+	unsigned int freq;
+	bool baudclk_is_used;
+
+	/* Prefer the explicitly set bitclock frequency */
+	if (ssi_private->bitclk_freq)
+		freq = ssi_private->bitclk_freq;
+	else
+		freq = params_channels(hw_params) * 32 * params_rate(hw_params);
+
+	/* Don't apply it to any non-baudclk circumstance */
+	if (IS_ERR(ssi_private->baudclk))
+		return -EINVAL;
+
+	baudclk_is_used = ssi_private->baudclk_streams & ~(BIT(substream->stream));
+
+	/* It should be already enough to divide clock by setting pm alone */
+	psr = 0;
+	div2 = 0;
+
+	factor = (div2 + 1) * (7 * psr + 1) * 2;
+
+	for (i = 0; i < 255; i++) {
+		tmprate = freq * factor * (i + 1);
+
+		if (baudclk_is_used)
+			clkrate = clk_get_rate(ssi_private->baudclk);
+		else
+			clkrate = clk_round_rate(ssi_private->baudclk, tmprate);
+
+		/*
+		 * Hardware limitation: The bclk rate must be
+		 * never greater than 1/5 IPG clock rate
+		 */
+		if (clkrate * 5 > clk_get_rate(ssi_private->clk))
+			continue;
+
+		clkrate /= factor;
+		afreq = clkrate / (i + 1);
+
+		if (freq == afreq)
+			sub = 0;
+		else if (freq / afreq == 1)
+			sub = freq - afreq;
+		else if (afreq / freq == 1)
+			sub = afreq - freq;
+		else
+			continue;
+
+		/* Calculate the fraction */
+		sub *= 100000;
+		do_div(sub, freq);
+
+		if (sub < savesub) {
+			baudrate = tmprate;
+			savesub = sub;
+			pm = i;
+		}
+
+		/* We are lucky */
+		if (savesub == 0)
+			break;
+	}
+
+	/* No proper pm found if it is still remaining the initial value */
+	if (pm == 999) {
+		dev_err(cpu_dai->dev, "failed to handle the required sysclk\n");
+		return -EINVAL;
+	}
+
+	stccr = CCSR_SSI_SxCCR_PM(pm + 1) | (div2 ? CCSR_SSI_SxCCR_DIV2 : 0) |
+		(psr ? CCSR_SSI_SxCCR_PSR : 0);
+	mask = CCSR_SSI_SxCCR_PM_MASK | CCSR_SSI_SxCCR_DIV2 |
+		CCSR_SSI_SxCCR_PSR;
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK || synchronous)
+		regmap_update_bits(regs, CCSR_SSI_STCCR, mask, stccr);
+	else
+		regmap_update_bits(regs, CCSR_SSI_SRCCR, mask, stccr);
+
+	if (!baudclk_is_used) {
+		ret = clk_set_rate(ssi_private->baudclk, baudrate);
+		if (ret) {
+			dev_err(cpu_dai->dev, "failed to set baudclk rate\n");
+			return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+
+static int fsl_ssi_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
+		int clk_id, unsigned int freq, int dir)
+{
+	struct fsl_ssi_private *ssi_private = snd_soc_dai_get_drvdata(cpu_dai);
+
+	ssi_private->bitclk_freq = freq;
+
+	return 0;
+}
+
+/**
+ * fsl_ssi_hw_params - program the sample size
+ *
+ * Most of the SSI registers have been programmed in the startup function,
+ * but the word length must be programmed here.  Unfortunately, programming
+ * the SxCCR.WL bits requires the SSI to be temporarily disabled.  This can
+ * cause a problem with supporting simultaneous playback and capture.  If
+ * the SSI is already playing a stream, then that stream may be temporarily
+ * stopped when you start capture.
+ *
+ * Note: The SxCCR.DC and SxCCR.PM bits are only used if the SSI is the
+ * clock master.
+ */
+static int fsl_ssi_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *hw_params, struct snd_soc_dai *cpu_dai)
+{
+	struct fsl_ssi_private *ssi_private = snd_soc_dai_get_drvdata(cpu_dai);
+	struct regmap *regs = ssi_private->regs;
+	unsigned int channels = params_channels(hw_params);
+	unsigned int sample_size =
+		snd_pcm_format_width(params_format(hw_params));
+	u32 wl = CCSR_SSI_SxCCR_WL(sample_size);
+	int ret;
+	u32 scr_val;
+	int enabled;
+
+	regmap_read(regs, CCSR_SSI_SCR, &scr_val);
+	enabled = scr_val & CCSR_SSI_SCR_SSIEN;
+
+	/*
+	 * If we're in synchronous mode, and the SSI is already enabled,
+	 * then STCCR is already set properly.
+	 */
+	if (enabled && ssi_private->cpu_dai_drv.symmetric_rates)
+		return 0;
+
+	if (fsl_ssi_is_i2s_master(ssi_private)) {
+		ret = fsl_ssi_set_bclk(substream, cpu_dai, hw_params);
+		if (ret)
+			return ret;
+
+		/* Do not enable the clock if it is already enabled */
+		if (!(ssi_private->baudclk_streams & BIT(substream->stream))) {
+			ret = clk_prepare_enable(ssi_private->baudclk);
+			if (ret)
+				return ret;
+
+			ssi_private->baudclk_streams |= BIT(substream->stream);
+		}
+	}
+
+	if (!fsl_ssi_is_ac97(ssi_private)) {
+		u8 i2smode;
+		/*
+		 * Switch to normal net mode in order to have a frame sync
+		 * signal every 32 bits instead of 16 bits
+		 */
+		if (fsl_ssi_is_i2s_cbm_cfs(ssi_private) && sample_size == 16)
+			i2smode = CCSR_SSI_SCR_I2S_MODE_NORMAL |
+				CCSR_SSI_SCR_NET;
+		else
+			i2smode = ssi_private->i2s_mode;
+
+		regmap_update_bits(regs, CCSR_SSI_SCR,
+				CCSR_SSI_SCR_NET | CCSR_SSI_SCR_I2S_MODE_MASK,
+				channels == 1 ? 0 : i2smode);
+	}
+
+	/*
+	 * FIXME: The documentation says that SxCCR[WL] should not be
+	 * modified while the SSI is enabled.  The only time this can
+	 * happen is if we're trying to do simultaneous playback and
+	 * capture in asynchronous mode.  Unfortunately, I have been enable
+	 * to get that to work at all on the P1022DS.  Therefore, we don't
+	 * bother to disable/enable the SSI when setting SxCCR[WL], because
+	 * the SSI will stop anyway.  Maybe one day, this will get fixed.
+	 */
+
+	/* In synchronous mode, the SSI uses STCCR for capture */
+	if ((substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ||
+	    ssi_private->cpu_dai_drv.symmetric_rates)
+		regmap_update_bits(regs, CCSR_SSI_STCCR, CCSR_SSI_SxCCR_WL_MASK,
+				wl);
+	else
+		regmap_update_bits(regs, CCSR_SSI_SRCCR, CCSR_SSI_SxCCR_WL_MASK,
+				wl);
+
+	return 0;
+}
+
+static int fsl_ssi_hw_free(struct snd_pcm_substream *substream,
+		struct snd_soc_dai *cpu_dai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct fsl_ssi_private *ssi_private =
+		snd_soc_dai_get_drvdata(rtd->cpu_dai);
+
+	if (fsl_ssi_is_i2s_master(ssi_private) &&
+			ssi_private->baudclk_streams & BIT(substream->stream)) {
+		clk_disable_unprepare(ssi_private->baudclk);
+		ssi_private->baudclk_streams &= ~BIT(substream->stream);
+	}
+
+	return 0;
+}
+
+static int _fsl_ssi_set_dai_fmt(struct device *dev,
+				struct fsl_ssi_private *ssi_private,
+				unsigned int fmt)
+{
+	struct regmap *regs = ssi_private->regs;
+	u32 strcr = 0, stcr, srcr, scr, mask;
+	u8 wm;
+
+	ssi_private->dai_fmt = fmt;
+
+	if (fsl_ssi_is_i2s_master(ssi_private) && IS_ERR(ssi_private->baudclk)) {
+		dev_err(dev, "baudclk is missing which is necessary for master mode\n");
+		return -EINVAL;
+	}
+
+	fsl_ssi_setup_reg_vals(ssi_private);
+
+	regmap_read(regs, CCSR_SSI_SCR, &scr);
+	scr &= ~(CCSR_SSI_SCR_SYN | CCSR_SSI_SCR_I2S_MODE_MASK);
+	scr |= CCSR_SSI_SCR_SYNC_TX_FS;
+
+	mask = CCSR_SSI_STCR_TXBIT0 | CCSR_SSI_STCR_TFDIR | CCSR_SSI_STCR_TXDIR |
+		CCSR_SSI_STCR_TSCKP | CCSR_SSI_STCR_TFSI | CCSR_SSI_STCR_TFSL |
+		CCSR_SSI_STCR_TEFS;
+	regmap_read(regs, CCSR_SSI_STCR, &stcr);
+	regmap_read(regs, CCSR_SSI_SRCR, &srcr);
+	stcr &= ~mask;
+	srcr &= ~mask;
+
+	ssi_private->i2s_mode = CCSR_SSI_SCR_NET;
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_I2S:
+		switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+		case SND_SOC_DAIFMT_CBM_CFS:
+		case SND_SOC_DAIFMT_CBS_CFS:
+			ssi_private->i2s_mode |= CCSR_SSI_SCR_I2S_MODE_MASTER;
+			regmap_update_bits(regs, CCSR_SSI_STCCR,
+					CCSR_SSI_SxCCR_DC_MASK,
+					CCSR_SSI_SxCCR_DC(2));
+			regmap_update_bits(regs, CCSR_SSI_SRCCR,
+					CCSR_SSI_SxCCR_DC_MASK,
+					CCSR_SSI_SxCCR_DC(2));
+			break;
+		case SND_SOC_DAIFMT_CBM_CFM:
+			ssi_private->i2s_mode |= CCSR_SSI_SCR_I2S_MODE_SLAVE;
+			break;
+		default:
+			return -EINVAL;
+		}
+
+		/* Data on rising edge of bclk, frame low, 1clk before data */
+		strcr |= CCSR_SSI_STCR_TFSI | CCSR_SSI_STCR_TSCKP |
+			CCSR_SSI_STCR_TXBIT0 | CCSR_SSI_STCR_TEFS;
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		/* Data on rising edge of bclk, frame high */
+		strcr |= CCSR_SSI_STCR_TXBIT0 | CCSR_SSI_STCR_TSCKP;
+		break;
+	case SND_SOC_DAIFMT_DSP_A:
+		/* Data on rising edge of bclk, frame high, 1clk before data */
+		strcr |= CCSR_SSI_STCR_TFSL | CCSR_SSI_STCR_TSCKP |
+			CCSR_SSI_STCR_TXBIT0 | CCSR_SSI_STCR_TEFS;
+		break;
+	case SND_SOC_DAIFMT_DSP_B:
+		/* Data on rising edge of bclk, frame high */
+		strcr |= CCSR_SSI_STCR_TFSL | CCSR_SSI_STCR_TSCKP |
+			CCSR_SSI_STCR_TXBIT0;
+		break;
+	case SND_SOC_DAIFMT_AC97:
+		ssi_private->i2s_mode |= CCSR_SSI_SCR_I2S_MODE_NORMAL;
+		break;
+	default:
+		return -EINVAL;
+	}
+	scr |= ssi_private->i2s_mode;
+
+	/* DAI clock inversion */
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_NB_NF:
+		/* Nothing to do for both normal cases */
+		break;
+	case SND_SOC_DAIFMT_IB_NF:
+		/* Invert bit clock */
+		strcr ^= CCSR_SSI_STCR_TSCKP;
+		break;
+	case SND_SOC_DAIFMT_NB_IF:
+		/* Invert frame clock */
+		strcr ^= CCSR_SSI_STCR_TFSI;
+		break;
+	case SND_SOC_DAIFMT_IB_IF:
+		/* Invert both clocks */
+		strcr ^= CCSR_SSI_STCR_TSCKP;
+		strcr ^= CCSR_SSI_STCR_TFSI;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* DAI clock master masks */
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBS_CFS:
+		strcr |= CCSR_SSI_STCR_TFDIR | CCSR_SSI_STCR_TXDIR;
+		scr |= CCSR_SSI_SCR_SYS_CLK_EN;
+		break;
+	case SND_SOC_DAIFMT_CBM_CFM:
+		scr &= ~CCSR_SSI_SCR_SYS_CLK_EN;
+		break;
+	case SND_SOC_DAIFMT_CBM_CFS:
+		strcr &= ~CCSR_SSI_STCR_TXDIR;
+		strcr |= CCSR_SSI_STCR_TFDIR;
+		scr &= ~CCSR_SSI_SCR_SYS_CLK_EN;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	stcr |= strcr;
+	srcr |= strcr;
+
+	if (ssi_private->cpu_dai_drv.symmetric_rates) {
+		/* Need to clear RXDIR when using SYNC mode */
+		srcr &= ~CCSR_SSI_SRCR_RXDIR;
+		scr |= CCSR_SSI_SCR_SYN;
+	}
+
+	regmap_write(regs, CCSR_SSI_STCR, stcr);
+	regmap_write(regs, CCSR_SSI_SRCR, srcr);
+	regmap_write(regs, CCSR_SSI_SCR, scr);
+
+	/*
+	 * Set the watermark for transmit FIFI 0 and receive FIFO 0. We don't
+	 * use FIFO 1. We program the transmit water to signal a DMA transfer
+	 * if there are only two (or fewer) elements left in the FIFO. Two
+	 * elements equals one frame (left channel, right channel). This value,
+	 * however, depends on the depth of the transmit buffer.
+	 *
+	 * We set the watermark on the same level as the DMA burstsize.  For
+	 * fiq it is probably better to use the biggest possible watermark
+	 * size.
+	 */
+	if (ssi_private->use_dma)
+		wm = ssi_private->fifo_depth - 2;
+	else
+		wm = ssi_private->fifo_depth;
+
+	regmap_write(regs, CCSR_SSI_SFCSR,
+			CCSR_SSI_SFCSR_TFWM0(wm) | CCSR_SSI_SFCSR_RFWM0(wm) |
+			CCSR_SSI_SFCSR_TFWM1(wm) | CCSR_SSI_SFCSR_RFWM1(wm));
+
+	if (ssi_private->use_dual_fifo) {
+		regmap_update_bits(regs, CCSR_SSI_SRCR, CCSR_SSI_SRCR_RFEN1,
+				CCSR_SSI_SRCR_RFEN1);
+		regmap_update_bits(regs, CCSR_SSI_STCR, CCSR_SSI_STCR_TFEN1,
+				CCSR_SSI_STCR_TFEN1);
+		regmap_update_bits(regs, CCSR_SSI_SCR, CCSR_SSI_SCR_TCH_EN,
+				CCSR_SSI_SCR_TCH_EN);
+	}
+
+	if (fmt & SND_SOC_DAIFMT_AC97)
+		fsl_ssi_setup_ac97(ssi_private);
+
+	return 0;
+
+}
+
+/**
+ * fsl_ssi_set_dai_fmt - configure Digital Audio Interface Format.
+ */
+static int fsl_ssi_set_dai_fmt(struct snd_soc_dai *cpu_dai, unsigned int fmt)
+{
+	struct fsl_ssi_private *ssi_private = snd_soc_dai_get_drvdata(cpu_dai);
+
+	return _fsl_ssi_set_dai_fmt(cpu_dai->dev, ssi_private, fmt);
+}
+
+/**
+ * fsl_ssi_set_dai_tdm_slot - set TDM slot number
+ *
+ * Note: This function can be only called when using SSI as DAI master
+ */
+static int fsl_ssi_set_dai_tdm_slot(struct snd_soc_dai *cpu_dai, u32 tx_mask,
+				u32 rx_mask, int slots, int slot_width)
+{
+	struct fsl_ssi_private *ssi_private = snd_soc_dai_get_drvdata(cpu_dai);
+	struct regmap *regs = ssi_private->regs;
+	u32 val;
+
+	/* The slot number should be >= 2 if using Network mode or I2S mode */
+	regmap_read(regs, CCSR_SSI_SCR, &val);
+	val &= CCSR_SSI_SCR_I2S_MODE_MASK | CCSR_SSI_SCR_NET;
+	if (val && slots < 2) {
+		dev_err(cpu_dai->dev, "slot number should be >= 2 in I2S or NET\n");
+		return -EINVAL;
+	}
+
+	regmap_update_bits(regs, CCSR_SSI_STCCR, CCSR_SSI_SxCCR_DC_MASK,
+			CCSR_SSI_SxCCR_DC(slots));
+	regmap_update_bits(regs, CCSR_SSI_SRCCR, CCSR_SSI_SxCCR_DC_MASK,
+			CCSR_SSI_SxCCR_DC(slots));
+
+	/* The register SxMSKs needs SSI to provide essential clock due to
+	 * hardware design. So we here temporarily enable SSI to set them.
+	 */
+	regmap_read(regs, CCSR_SSI_SCR, &val);
+	val &= CCSR_SSI_SCR_SSIEN;
+	regmap_update_bits(regs, CCSR_SSI_SCR, CCSR_SSI_SCR_SSIEN,
+			CCSR_SSI_SCR_SSIEN);
+
+	regmap_write(regs, CCSR_SSI_STMSK, ~tx_mask);
+	regmap_write(regs, CCSR_SSI_SRMSK, ~rx_mask);
+
+	regmap_update_bits(regs, CCSR_SSI_SCR, CCSR_SSI_SCR_SSIEN, val);
+
+	return 0;
+}
+
+/**
+ * fsl_ssi_trigger: start and stop the DMA transfer.
+ *
+ * This function is called by ALSA to start, stop, pause, and resume the DMA
+ * transfer of data.
+ *
+ * The DMA channel is in external master start and pause mode, which
+ * means the SSI completely controls the flow of data.
+ */
+static int fsl_ssi_trigger(struct snd_pcm_substream *substream, int cmd,
+			   struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct fsl_ssi_private *ssi_private = snd_soc_dai_get_drvdata(rtd->cpu_dai);
+	struct regmap *regs = ssi_private->regs;
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+			fsl_ssi_tx_config(ssi_private, true);
+		else
+			fsl_ssi_rx_config(ssi_private, true);
+		break;
+
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+			fsl_ssi_tx_config(ssi_private, false);
+		else
+			fsl_ssi_rx_config(ssi_private, false);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	if (fsl_ssi_is_ac97(ssi_private)) {
+		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+			regmap_write(regs, CCSR_SSI_SOR, CCSR_SSI_SOR_TX_CLR);
+		else
+			regmap_write(regs, CCSR_SSI_SOR, CCSR_SSI_SOR_RX_CLR);
+	}
+
+	return 0;
+}
+
+static int fsl_ssi_dai_probe(struct snd_soc_dai *dai)
+{
+	struct fsl_ssi_private *ssi_private = snd_soc_dai_get_drvdata(dai);
+
+	if (ssi_private->soc->imx && ssi_private->use_dma) {
+		dai->playback_dma_data = &ssi_private->dma_params_tx;
+		dai->capture_dma_data = &ssi_private->dma_params_rx;
+	}
+
+	return 0;
+}
+
+static const struct snd_soc_dai_ops fsl_ssi_dai_ops = {
+	.startup	= fsl_ssi_startup,
+	.shutdown       = fsl_ssi_shutdown,
+	.hw_params	= fsl_ssi_hw_params,
+	.hw_free	= fsl_ssi_hw_free,
+	.set_fmt	= fsl_ssi_set_dai_fmt,
+	.set_sysclk	= fsl_ssi_set_dai_sysclk,
+	.set_tdm_slot	= fsl_ssi_set_dai_tdm_slot,
+	.trigger	= fsl_ssi_trigger,
+};
+
+/* Template for the CPU dai driver structure */
+static struct snd_soc_dai_driver fsl_ssi_dai_template = {
+	.probe = fsl_ssi_dai_probe,
+	.playback = {
+		.stream_name = "CPU-Playback",
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = FSLSSI_I2S_RATES,
+		.formats = FSLSSI_I2S_FORMATS,
+	},
+	.capture = {
+		.stream_name = "CPU-Capture",
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = FSLSSI_I2S_RATES,
+		.formats = FSLSSI_I2S_FORMATS,
+	},
+	.ops = &fsl_ssi_dai_ops,
+};
+
+static const struct snd_soc_component_driver fsl_ssi_component = {
+	.name		= "fsl-ssi",
+};
+
+static struct snd_soc_dai_driver fsl_ssi_ac97_dai = {
+	.bus_control = true,
+	.playback = {
+		.stream_name = "AC97 Playback",
+		.channels_min = 2,
+		.channels_max = 2,
+		.rates = SNDRV_PCM_RATE_8000_48000,
+		.formats = SNDRV_PCM_FMTBIT_S16_LE,
+	},
+	.capture = {
+		.stream_name = "AC97 Capture",
+		.channels_min = 2,
+		.channels_max = 2,
+		.rates = SNDRV_PCM_RATE_48000,
+		.formats = SNDRV_PCM_FMTBIT_S16_LE,
+	},
+	.ops = &fsl_ssi_dai_ops,
+};
+
+
+static struct fsl_ssi_private *fsl_ac97_data;
+
+static void fsl_ssi_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
+		unsigned short val)
+{
+	struct regmap *regs = fsl_ac97_data->regs;
+	unsigned int lreg;
+	unsigned int lval;
+
+	if (reg > 0x7f)
+		return;
+
+
+	lreg = reg <<  12;
+	regmap_write(regs, CCSR_SSI_SACADD, lreg);
+
+	lval = val << 4;
+	regmap_write(regs, CCSR_SSI_SACDAT, lval);
+
+	regmap_update_bits(regs, CCSR_SSI_SACNT, CCSR_SSI_SACNT_RDWR_MASK,
+			CCSR_SSI_SACNT_WR);
+	udelay(100);
+}
+
+static unsigned short fsl_ssi_ac97_read(struct snd_ac97 *ac97,
+		unsigned short reg)
+{
+	struct regmap *regs = fsl_ac97_data->regs;
+
+	unsigned short val = -1;
+	u32 reg_val;
+	unsigned int lreg;
+
+	lreg = (reg & 0x7f) <<  12;
+	regmap_write(regs, CCSR_SSI_SACADD, lreg);
+	regmap_update_bits(regs, CCSR_SSI_SACNT, CCSR_SSI_SACNT_RDWR_MASK,
+			CCSR_SSI_SACNT_RD);
+
+	udelay(100);
+
+	regmap_read(regs, CCSR_SSI_SACDAT, &reg_val);
+	val = (reg_val >> 4) & 0xffff;
+
+	return val;
+}
+
+static struct snd_ac97_bus_ops fsl_ssi_ac97_ops = {
+	.read		= fsl_ssi_ac97_read,
+	.write		= fsl_ssi_ac97_write,
+};
+
+/**
+ * Make every character in a string lower-case
+ */
+static void make_lowercase(char *s)
+{
+	char *p = s;
+	char c;
+
+	while ((c = *p)) {
+		if ((c >= 'A') && (c <= 'Z'))
+			*p = c + ('a' - 'A');
+		p++;
+	}
+}
+
+static int fsl_ssi_imx_probe(struct platform_device *pdev,
+		struct fsl_ssi_private *ssi_private, void __iomem *iomem)
+{
+	struct device_node *np = pdev->dev.of_node;
+	u32 dmas[4];
+	int ret;
+
+	if (ssi_private->has_ipg_clk_name)
+		ssi_private->clk = devm_clk_get(&pdev->dev, "ipg");
+	else
+		ssi_private->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(ssi_private->clk)) {
+		ret = PTR_ERR(ssi_private->clk);
+		dev_err(&pdev->dev, "could not get clock: %d\n", ret);
+		return ret;
+	}
+
+	if (!ssi_private->has_ipg_clk_name) {
+		ret = clk_prepare_enable(ssi_private->clk);
+		if (ret) {
+			dev_err(&pdev->dev, "clk_prepare_enable failed: %d\n", ret);
+			return ret;
+		}
+	}
+
+	/* For those SLAVE implementations, we ingore non-baudclk cases
+	 * and, instead, abandon MASTER mode that needs baud clock.
+	 */
+	ssi_private->baudclk = devm_clk_get(&pdev->dev, "baud");
+	if (IS_ERR(ssi_private->baudclk))
+		dev_dbg(&pdev->dev, "could not get baud clock: %ld\n",
+			 PTR_ERR(ssi_private->baudclk));
+
+	/*
+	 * We have burstsize be "fifo_depth - 2" to match the SSI
+	 * watermark setting in fsl_ssi_startup().
+	 */
+	ssi_private->dma_params_tx.maxburst = ssi_private->fifo_depth - 2;
+	ssi_private->dma_params_rx.maxburst = ssi_private->fifo_depth - 2;
+	ssi_private->dma_params_tx.addr = ssi_private->ssi_phys + CCSR_SSI_STX0;
+	ssi_private->dma_params_rx.addr = ssi_private->ssi_phys + CCSR_SSI_SRX0;
+
+	ret = of_property_read_u32_array(np, "dmas", dmas, 4);
+	if (ssi_private->use_dma && !ret && dmas[2] == IMX_DMATYPE_SSI_DUAL) {
+		ssi_private->use_dual_fifo = true;
+		/* When using dual fifo mode, we need to keep watermark
+		 * as even numbers due to dma script limitation.
+		 */
+		ssi_private->dma_params_tx.maxburst &= ~0x1;
+		ssi_private->dma_params_rx.maxburst &= ~0x1;
+	}
+
+	if (!ssi_private->use_dma) {
+
+		/*
+		 * Some boards use an incompatible codec. To get it
+		 * working, we are using imx-fiq-pcm-audio, that
+		 * can handle those codecs. DMA is not possible in this
+		 * situation.
+		 */
+
+		ssi_private->fiq_params.irq = ssi_private->irq;
+		ssi_private->fiq_params.base = iomem;
+		ssi_private->fiq_params.dma_params_rx =
+			&ssi_private->dma_params_rx;
+		ssi_private->fiq_params.dma_params_tx =
+			&ssi_private->dma_params_tx;
+
+		ret = imx_pcm_fiq_init(pdev, &ssi_private->fiq_params);
+		if (ret)
+			goto error_pcm;
+	} else {
+		ret = imx_pcm_dma_init(pdev);
+		if (ret)
+			goto error_pcm;
+	}
+
+	return 0;
+
+error_pcm:
+
+	if (!ssi_private->has_ipg_clk_name)
+		clk_disable_unprepare(ssi_private->clk);
+	return ret;
+}
+
+static void fsl_ssi_imx_clean(struct platform_device *pdev,
+		struct fsl_ssi_private *ssi_private)
+{
+	if (!ssi_private->use_dma)
+		imx_pcm_fiq_exit(pdev);
+	if (!ssi_private->has_ipg_clk_name)
+		clk_disable_unprepare(ssi_private->clk);
+}
+
+static int fsl_ssi_probe(struct platform_device *pdev)
+{
+	struct fsl_ssi_private *ssi_private;
+	int ret = 0;
+	struct device_node *np = pdev->dev.of_node;
+	const struct of_device_id *of_id;
+	const char *p, *sprop;
+	const uint32_t *iprop;
+	struct resource *res;
+	void __iomem *iomem;
+	char name[64];
+
+	/* SSIs that are not connected on the board should have a
+	 *      status = "disabled"
+	 * property in their device tree nodes.
+	 */
+	if (!of_device_is_available(np))
+		return -ENODEV;
+
+	of_id = of_match_device(fsl_ssi_ids, &pdev->dev);
+	if (!of_id || !of_id->data)
+		return -EINVAL;
+
+	ssi_private = devm_kzalloc(&pdev->dev, sizeof(*ssi_private),
+			GFP_KERNEL);
+	if (!ssi_private) {
+		dev_err(&pdev->dev, "could not allocate DAI object\n");
+		return -ENOMEM;
+	}
+
+	ssi_private->soc = of_id->data;
+
+	sprop = of_get_property(np, "fsl,mode", NULL);
+	if (sprop) {
+		if (!strcmp(sprop, "ac97-slave"))
+			ssi_private->dai_fmt = SND_SOC_DAIFMT_AC97;
+	}
+
+	ssi_private->use_dma = !of_property_read_bool(np,
+			"fsl,fiq-stream-filter");
+
+	if (fsl_ssi_is_ac97(ssi_private)) {
+		memcpy(&ssi_private->cpu_dai_drv, &fsl_ssi_ac97_dai,
+				sizeof(fsl_ssi_ac97_dai));
+
+		fsl_ac97_data = ssi_private;
+
+		snd_soc_set_ac97_ops_of_reset(&fsl_ssi_ac97_ops, pdev);
+	} else {
+		/* Initialize this copy of the CPU DAI driver structure */
+		memcpy(&ssi_private->cpu_dai_drv, &fsl_ssi_dai_template,
+		       sizeof(fsl_ssi_dai_template));
+	}
+	ssi_private->cpu_dai_drv.name = dev_name(&pdev->dev);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	iomem = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(iomem))
+		return PTR_ERR(iomem);
+	ssi_private->ssi_phys = res->start;
+
+	ret = of_property_match_string(np, "clock-names", "ipg");
+	if (ret < 0) {
+		ssi_private->has_ipg_clk_name = false;
+		ssi_private->regs = devm_regmap_init_mmio(&pdev->dev, iomem,
+			&fsl_ssi_regconfig);
+	} else {
+		ssi_private->has_ipg_clk_name = true;
+		ssi_private->regs = devm_regmap_init_mmio_clk(&pdev->dev,
+			"ipg", iomem, &fsl_ssi_regconfig);
+	}
+	if (IS_ERR(ssi_private->regs)) {
+		dev_err(&pdev->dev, "Failed to init register map\n");
+		return PTR_ERR(ssi_private->regs);
+	}
+
+	ssi_private->irq = platform_get_irq(pdev, 0);
+	if (ssi_private->irq < 0) {
+		dev_err(&pdev->dev, "no irq for node %s\n", pdev->name);
+		return ssi_private->irq;
+	}
+
+	/* Are the RX and the TX clocks locked? */
+	if (!of_find_property(np, "fsl,ssi-asynchronous", NULL)) {
+		ssi_private->cpu_dai_drv.symmetric_rates = 1;
+		ssi_private->cpu_dai_drv.symmetric_channels = 1;
+		ssi_private->cpu_dai_drv.symmetric_samplebits = 1;
+	}
+
+	/* Determine the FIFO depth. */
+	iprop = of_get_property(np, "fsl,fifo-depth", NULL);
+	if (iprop)
+		ssi_private->fifo_depth = be32_to_cpup(iprop);
+	else
+                /* Older 8610 DTs didn't have the fifo-depth property */
+		ssi_private->fifo_depth = 8;
+
+	dev_set_drvdata(&pdev->dev, ssi_private);
+
+	if (ssi_private->soc->imx) {
+		ret = fsl_ssi_imx_probe(pdev, ssi_private, iomem);
+		if (ret)
+			return ret;
+	}
+
+	ret = devm_snd_soc_register_component(&pdev->dev, &fsl_ssi_component,
+					      &ssi_private->cpu_dai_drv, 1);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register DAI: %d\n", ret);
+		goto error_asoc_register;
+	}
+
+	if (ssi_private->use_dma) {
+		ret = devm_request_irq(&pdev->dev, ssi_private->irq,
+					fsl_ssi_isr, 0, dev_name(&pdev->dev),
+					ssi_private);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "could not claim irq %u\n",
+					ssi_private->irq);
+			goto error_asoc_register;
+		}
+	}
+
+	ret = fsl_ssi_debugfs_create(&ssi_private->dbg_stats, &pdev->dev);
+	if (ret)
+		goto error_asoc_register;
+
+	/*
+	 * If codec-handle property is missing from SSI node, we assume
+	 * that the machine driver uses new binding which does not require
+	 * SSI driver to trigger machine driver's probe.
+	 */
+	if (!of_get_property(np, "codec-handle", NULL))
+		goto done;
+
+	/* Trigger the machine driver's probe function.  The platform driver
+	 * name of the machine driver is taken from /compatible property of the
+	 * device tree.  We also pass the address of the CPU DAI driver
+	 * structure.
+	 */
+	sprop = of_get_property(of_find_node_by_path("/"), "compatible", NULL);
+	/* Sometimes the compatible name has a "fsl," prefix, so we strip it. */
+	p = strrchr(sprop, ',');
+	if (p)
+		sprop = p + 1;
+	snprintf(name, sizeof(name), "snd-soc-%s", sprop);
+	make_lowercase(name);
+
+	ssi_private->pdev =
+		platform_device_register_data(&pdev->dev, name, 0, NULL, 0);
+	if (IS_ERR(ssi_private->pdev)) {
+		ret = PTR_ERR(ssi_private->pdev);
+		dev_err(&pdev->dev, "failed to register platform: %d\n", ret);
+		goto error_sound_card;
+	}
+
+done:
+	if (ssi_private->dai_fmt)
+		_fsl_ssi_set_dai_fmt(&pdev->dev, ssi_private,
+				     ssi_private->dai_fmt);
+
+	return 0;
+
+error_sound_card:
+	fsl_ssi_debugfs_remove(&ssi_private->dbg_stats);
+
+error_asoc_register:
+	if (ssi_private->soc->imx)
+		fsl_ssi_imx_clean(pdev, ssi_private);
+
+	return ret;
+}
+
+static int fsl_ssi_remove(struct platform_device *pdev)
+{
+	struct fsl_ssi_private *ssi_private = dev_get_drvdata(&pdev->dev);
+
+	fsl_ssi_debugfs_remove(&ssi_private->dbg_stats);
+
+	if (ssi_private->pdev)
+		platform_device_unregister(ssi_private->pdev);
+
+	if (ssi_private->soc->imx)
+		fsl_ssi_imx_clean(pdev, ssi_private);
+
+	return 0;
+}
+
+static struct platform_driver fsl_ssi_driver = {
+	.driver = {
+		.name = "fsl-ssi-dai",
+		.of_match_table = fsl_ssi_ids,
+	},
+	.probe = fsl_ssi_probe,
+	.remove = fsl_ssi_remove,
+};
+
+module_platform_driver(fsl_ssi_driver);
+
+MODULE_ALIAS("platform:fsl-ssi-dai");
+MODULE_AUTHOR("Timur Tabi <timur@freescale.com>");
+MODULE_DESCRIPTION("Freescale Synchronous Serial Interface (SSI) ASoC Driver");
+MODULE_LICENSE("GPL v2");