Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

1 files changed, 35 insertions, 0 deletions

diff --git a/kernel/net/x25/Kconfig b/kernel/net/x25/Kconfig
new file mode 100644
index 000000000..e2fa133f9
--- /dev/null
+++ b/kernel/net/x25/Kconfig
@@ -0,0 +1,35 @@
+#
+# CCITT X.25 Packet Layer
+#
+
+config X25
+	tristate "CCITT X.25 Packet Layer"
+	---help---
+	  X.25 is a set of standardized network protocols, similar in scope to
+	  frame relay; the one physical line from your box to the X.25 network
+	  entry point can carry several logical point-to-point connections
+	  (called "virtual circuits") to other computers connected to the X.25
+	  network. Governments, banks, and other organizations tend to use it
+	  to connect to each other or to form Wide Area Networks (WANs). Many
+	  countries have public X.25 networks. X.25 consists of two
+	  protocols: the higher level Packet Layer Protocol (PLP) (say Y here
+	  if you want that) and the lower level data link layer protocol LAPB
+	  (say Y to "LAPB Data Link Driver" below if you want that).
+
+	  You can read more about X.25 at <http://www.sangoma.com/tutorials/x25/> and
+	  <http://docwiki.cisco.com/wiki/X.25>.
+	  Information about X.25 for Linux is contained in the files
+	  <file:Documentation/networking/x25.txt> and
+	  <file:Documentation/networking/x25-iface.txt>.
+
+	  One connects to an X.25 network either with a dedicated network card
+	  using the X.21 protocol (not yet supported by Linux) or one can do
+	  X.25 over a standard telephone line using an ordinary modem (say Y
+	  to "X.25 async driver" below) or over Ethernet using an ordinary
+	  Ethernet card and the LAPB over Ethernet (say Y to "LAPB Data Link
+	  Driver" and "LAPB over Ethernet driver" below).
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called x25. If unsure, say N.
+
+