These changes are the raw update to linux-4.4.6-rt14. Kernel sources

are taken from kernel.org, and rt patch from the rt wiki download page.

During the rebasing, the following patch collided:

Force tick interrupt and get rid of softirq magic(I70131fb85).

Collisions have been removed because its logic was found on the
source already.

Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>

1 files changed, 44 insertions, 27 deletions

diff --git a/kernel/net/mac80211/scan.c b/kernel/net/mac80211/scan.c
index 7bb6a9383..acbe182b7 100644
--- a/kernel/net/mac80211/scan.c
+++ b/kernel/net/mac80211/scan.c
@@ -6,7 +6,7 @@
  * Copyright 2005, Devicescape Software, Inc.
  * Copyright 2006-2007	Jiri Benc <jbenc@suse.cz>
  * Copyright 2007, Michael Wu <flamingice@sourmilk.net>
- * Copyright 2013-2014  Intel Mobile Communications GmbH
+ * Copyright 2013-2015  Intel Mobile Communications GmbH
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -16,7 +16,6 @@
 #include <linux/if_arp.h>
 #include <linux/etherdevice.h>
 #include <linux/rtnetlink.h>
-#include <linux/pm_qos.h>
 #include <net/sch_generic.h>
 #include <linux/slab.h>
 #include <linux/export.h>
@@ -67,25 +66,30 @@ ieee80211_bss_info_update(struct ieee80211_local *local,
 	struct cfg80211_bss *cbss;
 	struct ieee80211_bss *bss;
 	int clen, srlen;
-	enum nl80211_bss_scan_width scan_width;
-	s32 signal = 0;
+	struct cfg80211_inform_bss bss_meta = {};
+	bool signal_valid;
 
-	if (local->hw.flags & IEEE80211_HW_SIGNAL_DBM)
-		signal = rx_status->signal * 100;
-	else if (local->hw.flags & IEEE80211_HW_SIGNAL_UNSPEC)
-		signal = (rx_status->signal * 100) / local->hw.max_signal;
+	if (ieee80211_hw_check(&local->hw, SIGNAL_DBM))
+		bss_meta.signal = rx_status->signal * 100;
+	else if (ieee80211_hw_check(&local->hw, SIGNAL_UNSPEC))
+		bss_meta.signal = (rx_status->signal * 100) / local->hw.max_signal;
 
-	scan_width = NL80211_BSS_CHAN_WIDTH_20;
+	bss_meta.scan_width = NL80211_BSS_CHAN_WIDTH_20;
 	if (rx_status->flag & RX_FLAG_5MHZ)
-		scan_width = NL80211_BSS_CHAN_WIDTH_5;
+		bss_meta.scan_width = NL80211_BSS_CHAN_WIDTH_5;
 	if (rx_status->flag & RX_FLAG_10MHZ)
-		scan_width = NL80211_BSS_CHAN_WIDTH_10;
+		bss_meta.scan_width = NL80211_BSS_CHAN_WIDTH_10;
 
-	cbss = cfg80211_inform_bss_width_frame(local->hw.wiphy, channel,
-					       scan_width, mgmt, len, signal,
-					       GFP_ATOMIC);
+	bss_meta.chan = channel;
+	cbss = cfg80211_inform_bss_frame_data(local->hw.wiphy, &bss_meta,
+					      mgmt, len, GFP_ATOMIC);
 	if (!cbss)
 		return NULL;
+	/* In case the signal is invalid update the status */
+	signal_valid = abs(channel->center_freq - cbss->channel->center_freq)
+		<= local->hw.wiphy->max_adj_channel_rssi_comp;
+	if (!signal_valid)
+		rx_status->flag |= RX_FLAG_NO_SIGNAL_VAL;
 
 	bss = (void *)cbss->priv;
 
@@ -257,7 +261,7 @@ static bool ieee80211_prep_hw_scan(struct ieee80211_local *local)
 	if (test_bit(SCAN_HW_CANCELLED, &local->scanning))
 		return false;
 
-	if (local->hw.flags & IEEE80211_SINGLE_HW_SCAN_ON_ALL_BANDS) {
+	if (ieee80211_hw_check(&local->hw, SINGLE_SCAN_ON_ALL_BANDS)) {
 		for (i = 0; i < req->n_channels; i++) {
 			local->hw_scan_req->req.channels[i] = req->channels[i];
 			bands_used |= BIT(req->channels[i]->band);
@@ -310,6 +314,7 @@ static void __ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted)
 	bool was_scanning = local->scanning;
 	struct cfg80211_scan_request *scan_req;
 	struct ieee80211_sub_if_data *scan_sdata;
+	struct ieee80211_sub_if_data *sdata;
 
 	lockdep_assert_held(&local->mtx);
 
@@ -326,7 +331,7 @@ static void __ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted)
 		return;
 
 	if (hw_scan && !aborted &&
-	    !(local->hw.flags & IEEE80211_SINGLE_HW_SCAN_ON_ALL_BANDS) &&
+	    !ieee80211_hw_check(&local->hw, SINGLE_SCAN_ON_ALL_BANDS) &&
 	    ieee80211_prep_hw_scan(local)) {
 		int rc;
 
@@ -369,7 +374,16 @@ static void __ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted)
 
 	ieee80211_mlme_notify_scan_completed(local);
 	ieee80211_ibss_notify_scan_completed(local);
-	ieee80211_mesh_notify_scan_completed(local);
+
+	/* Requeue all the work that might have been ignored while
+	 * the scan was in progress; if there was none this will
+	 * just be a no-op for the particular interface.
+	 */
+	list_for_each_entry_rcu(sdata, &local->interfaces, list) {
+		if (ieee80211_sdata_running(sdata))
+			ieee80211_queue_work(&sdata->local->hw, &sdata->work);
+	}
+
 	if (was_scanning)
 		ieee80211_start_next_roc(local);
 }
@@ -520,7 +534,7 @@ static int __ieee80211_start_scan(struct ieee80211_sub_if_data *sdata,
 
 		local->hw_scan_ies_bufsize = local->scan_ies_len + req->ie_len;
 
-		if (local->hw.flags & IEEE80211_SINGLE_HW_SCAN_ON_ALL_BANDS) {
+		if (ieee80211_hw_check(&local->hw, SINGLE_SCAN_ON_ALL_BANDS)) {
 			int i, n_bands = 0;
 			u8 bands_counted = 0;
 
@@ -593,8 +607,8 @@ static int __ieee80211_start_scan(struct ieee80211_sub_if_data *sdata,
 		/* We need to ensure power level is at max for scanning. */
 		ieee80211_hw_config(local, 0);
 
-		if ((req->channels[0]->flags &
-		     IEEE80211_CHAN_NO_IR) ||
+		if ((req->channels[0]->flags & (IEEE80211_CHAN_NO_IR |
+						IEEE80211_CHAN_RADAR)) ||
 		    !req->n_ssids) {
 			next_delay = IEEE80211_PASSIVE_CHANNEL_TIME;
 		} else {
@@ -641,7 +655,7 @@ ieee80211_scan_get_channel_time(struct ieee80211_channel *chan)
 	 * TODO: channel switching also consumes quite some time,
 	 * add that delay as well to get a better estimation
 	 */
-	if (chan->flags & IEEE80211_CHAN_NO_IR)
+	if (chan->flags & (IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_RADAR))
 		return IEEE80211_PASSIVE_CHANNEL_TIME;
 	return IEEE80211_PROBE_DELAY + IEEE80211_CHANNEL_TIME;
 }
@@ -773,7 +787,8 @@ static void ieee80211_scan_state_set_channel(struct ieee80211_local *local,
 	 *
 	 * In any case, it is not necessary for a passive scan.
 	 */
-	if (chan->flags & IEEE80211_CHAN_NO_IR || !scan_req->n_ssids) {
+	if ((chan->flags & (IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_RADAR)) ||
+	    !scan_req->n_ssids) {
 		*next_delay = IEEE80211_PASSIVE_CHANNEL_TIME;
 		local->next_scan_state = SCAN_DECISION;
 		return;
@@ -1136,10 +1151,10 @@ int ieee80211_request_sched_scan_start(struct ieee80211_sub_if_data *sdata,
 	return ret;
 }
 
-int ieee80211_request_sched_scan_stop(struct ieee80211_sub_if_data *sdata)
+int ieee80211_request_sched_scan_stop(struct ieee80211_local *local)
 {
-	struct ieee80211_local *local = sdata->local;
-	int ret = 0;
+	struct ieee80211_sub_if_data *sched_scan_sdata;
+	int ret = -ENOENT;
 
 	mutex_lock(&local->mtx);
 
@@ -1151,8 +1166,10 @@ int ieee80211_request_sched_scan_stop(struct ieee80211_sub_if_data *sdata)
 	/* We don't want to restart sched scan anymore. */
 	RCU_INIT_POINTER(local->sched_scan_req, NULL);
 
-	if (rcu_access_pointer(local->sched_scan_sdata)) {
-		ret = drv_sched_scan_stop(local, sdata);
+	sched_scan_sdata = rcu_dereference_protected(local->sched_scan_sdata,
+						lockdep_is_held(&local->mtx));
+	if (sched_scan_sdata) {
+		ret = drv_sched_scan_stop(local, sched_scan_sdata);
 		if (!ret)
 			RCU_INIT_POINTER(local->sched_scan_sdata, NULL);
 	}