diff options
author | 2016-04-11 10:41:07 +0300 | |
---|---|---|
committer | 2016-04-13 08:17:18 +0300 | |
commit | e09b41010ba33a20a87472ee821fa407a5b8da36 (patch) | |
tree | d10dc367189862e7ca5c592f033dc3726e1df4e3 /kernel/mm/page-writeback.c | |
parent | f93b97fd65072de626c074dbe099a1fff05ce060 (diff) |
These changes are the raw update to linux-4.4.6-rt14. Kernel sources
are taken from kernel.org, and rt patch from the rt wiki download page.
During the rebasing, the following patch collided:
Force tick interrupt and get rid of softirq magic(I70131fb85).
Collisions have been removed because its logic was found on the
source already.
Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>
Diffstat (limited to 'kernel/mm/page-writeback.c')
-rw-r--r-- | kernel/mm/page-writeback.c | 1251 |
1 files changed, 816 insertions, 435 deletions
diff --git a/kernel/mm/page-writeback.c b/kernel/mm/page-writeback.c index eb59f7eea..d15d88c8e 100644 --- a/kernel/mm/page-writeback.c +++ b/kernel/mm/page-writeback.c @@ -2,7 +2,7 @@ * mm/page-writeback.c * * Copyright (C) 2002, Linus Torvalds. - * Copyright (C) 2007 Red Hat, Inc., Peter Zijlstra <pzijlstr@redhat.com> + * Copyright (C) 2007 Red Hat, Inc., Peter Zijlstra * * Contains functions related to writing back dirty pages at the * address_space level. @@ -122,31 +122,28 @@ EXPORT_SYMBOL(laptop_mode); /* End of sysctl-exported parameters */ -unsigned long global_dirty_limit; +struct wb_domain global_wb_domain; -/* - * Scale the writeback cache size proportional to the relative writeout speeds. - * - * We do this by keeping a floating proportion between BDIs, based on page - * writeback completions [end_page_writeback()]. Those devices that write out - * pages fastest will get the larger share, while the slower will get a smaller - * share. - * - * We use page writeout completions because we are interested in getting rid of - * dirty pages. Having them written out is the primary goal. - * - * We introduce a concept of time, a period over which we measure these events, - * because demand can/will vary over time. The length of this period itself is - * measured in page writeback completions. - * - */ -static struct fprop_global writeout_completions; +/* consolidated parameters for balance_dirty_pages() and its subroutines */ +struct dirty_throttle_control { +#ifdef CONFIG_CGROUP_WRITEBACK + struct wb_domain *dom; + struct dirty_throttle_control *gdtc; /* only set in memcg dtc's */ +#endif + struct bdi_writeback *wb; + struct fprop_local_percpu *wb_completions; -static void writeout_period(unsigned long t); -/* Timer for aging of writeout_completions */ -static struct timer_list writeout_period_timer = - TIMER_DEFERRED_INITIALIZER(writeout_period, 0, 0); -static unsigned long writeout_period_time = 0; + unsigned long avail; /* dirtyable */ + unsigned long dirty; /* file_dirty + write + nfs */ + unsigned long thresh; /* dirty threshold */ + unsigned long bg_thresh; /* dirty background threshold */ + + unsigned long wb_dirty; /* per-wb counterparts */ + unsigned long wb_thresh; + unsigned long wb_bg_thresh; + + unsigned long pos_ratio; +}; /* * Length of period for aging writeout fractions of bdis. This is an @@ -155,6 +152,102 @@ static unsigned long writeout_period_time = 0; */ #define VM_COMPLETIONS_PERIOD_LEN (3*HZ) +#ifdef CONFIG_CGROUP_WRITEBACK + +#define GDTC_INIT(__wb) .wb = (__wb), \ + .dom = &global_wb_domain, \ + .wb_completions = &(__wb)->completions + +#define GDTC_INIT_NO_WB .dom = &global_wb_domain + +#define MDTC_INIT(__wb, __gdtc) .wb = (__wb), \ + .dom = mem_cgroup_wb_domain(__wb), \ + .wb_completions = &(__wb)->memcg_completions, \ + .gdtc = __gdtc + +static bool mdtc_valid(struct dirty_throttle_control *dtc) +{ + return dtc->dom; +} + +static struct wb_domain *dtc_dom(struct dirty_throttle_control *dtc) +{ + return dtc->dom; +} + +static struct dirty_throttle_control *mdtc_gdtc(struct dirty_throttle_control *mdtc) +{ + return mdtc->gdtc; +} + +static struct fprop_local_percpu *wb_memcg_completions(struct bdi_writeback *wb) +{ + return &wb->memcg_completions; +} + +static void wb_min_max_ratio(struct bdi_writeback *wb, + unsigned long *minp, unsigned long *maxp) +{ + unsigned long this_bw = wb->avg_write_bandwidth; + unsigned long tot_bw = atomic_long_read(&wb->bdi->tot_write_bandwidth); + unsigned long long min = wb->bdi->min_ratio; + unsigned long long max = wb->bdi->max_ratio; + + /* + * @wb may already be clean by the time control reaches here and + * the total may not include its bw. + */ + if (this_bw < tot_bw) { + if (min) { + min *= this_bw; + do_div(min, tot_bw); + } + if (max < 100) { + max *= this_bw; + do_div(max, tot_bw); + } + } + + *minp = min; + *maxp = max; +} + +#else /* CONFIG_CGROUP_WRITEBACK */ + +#define GDTC_INIT(__wb) .wb = (__wb), \ + .wb_completions = &(__wb)->completions +#define GDTC_INIT_NO_WB +#define MDTC_INIT(__wb, __gdtc) + +static bool mdtc_valid(struct dirty_throttle_control *dtc) +{ + return false; +} + +static struct wb_domain *dtc_dom(struct dirty_throttle_control *dtc) +{ + return &global_wb_domain; +} + +static struct dirty_throttle_control *mdtc_gdtc(struct dirty_throttle_control *mdtc) +{ + return NULL; +} + +static struct fprop_local_percpu *wb_memcg_completions(struct bdi_writeback *wb) +{ + return NULL; +} + +static void wb_min_max_ratio(struct bdi_writeback *wb, + unsigned long *minp, unsigned long *maxp) +{ + *minp = wb->bdi->min_ratio; + *maxp = wb->bdi->max_ratio; +} + +#endif /* CONFIG_CGROUP_WRITEBACK */ + /* * In a memory zone, there is a certain amount of pages we consider * available for the page cache, which is essentially the number of @@ -250,42 +343,88 @@ static unsigned long global_dirtyable_memory(void) return x + 1; /* Ensure that we never return 0 */ } -/* - * global_dirty_limits - background-writeback and dirty-throttling thresholds +/** + * domain_dirty_limits - calculate thresh and bg_thresh for a wb_domain + * @dtc: dirty_throttle_control of interest * - * Calculate the dirty thresholds based on sysctl parameters - * - vm.dirty_background_ratio or vm.dirty_background_bytes - * - vm.dirty_ratio or vm.dirty_bytes - * The dirty limits will be lifted by 1/4 for PF_LESS_THROTTLE (ie. nfsd) and + * Calculate @dtc->thresh and ->bg_thresh considering + * vm_dirty_{bytes|ratio} and dirty_background_{bytes|ratio}. The caller + * must ensure that @dtc->avail is set before calling this function. The + * dirty limits will be lifted by 1/4 for PF_LESS_THROTTLE (ie. nfsd) and * real-time tasks. */ -void global_dirty_limits(unsigned long *pbackground, unsigned long *pdirty) +static void domain_dirty_limits(struct dirty_throttle_control *dtc) { - const unsigned long available_memory = global_dirtyable_memory(); - unsigned long background; - unsigned long dirty; + const unsigned long available_memory = dtc->avail; + struct dirty_throttle_control *gdtc = mdtc_gdtc(dtc); + unsigned long bytes = vm_dirty_bytes; + unsigned long bg_bytes = dirty_background_bytes; + unsigned long ratio = vm_dirty_ratio; + unsigned long bg_ratio = dirty_background_ratio; + unsigned long thresh; + unsigned long bg_thresh; struct task_struct *tsk; - if (vm_dirty_bytes) - dirty = DIV_ROUND_UP(vm_dirty_bytes, PAGE_SIZE); + /* gdtc is !NULL iff @dtc is for memcg domain */ + if (gdtc) { + unsigned long global_avail = gdtc->avail; + + /* + * The byte settings can't be applied directly to memcg + * domains. Convert them to ratios by scaling against + * globally available memory. + */ + if (bytes) + ratio = min(DIV_ROUND_UP(bytes, PAGE_SIZE) * 100 / + global_avail, 100UL); + if (bg_bytes) + bg_ratio = min(DIV_ROUND_UP(bg_bytes, PAGE_SIZE) * 100 / + global_avail, 100UL); + bytes = bg_bytes = 0; + } + + if (bytes) + thresh = DIV_ROUND_UP(bytes, PAGE_SIZE); else - dirty = (vm_dirty_ratio * available_memory) / 100; + thresh = (ratio * available_memory) / 100; - if (dirty_background_bytes) - background = DIV_ROUND_UP(dirty_background_bytes, PAGE_SIZE); + if (bg_bytes) + bg_thresh = DIV_ROUND_UP(bg_bytes, PAGE_SIZE); else - background = (dirty_background_ratio * available_memory) / 100; + bg_thresh = (bg_ratio * available_memory) / 100; - if (background >= dirty) - background = dirty / 2; + if (bg_thresh >= thresh) + bg_thresh = thresh / 2; tsk = current; if (tsk->flags & PF_LESS_THROTTLE || rt_task(tsk)) { - background += background / 4; - dirty += dirty / 4; + bg_thresh += bg_thresh / 4; + thresh += thresh / 4; } - *pbackground = background; - *pdirty = dirty; - trace_global_dirty_state(background, dirty); + dtc->thresh = thresh; + dtc->bg_thresh = bg_thresh; + + /* we should eventually report the domain in the TP */ + if (!gdtc) + trace_global_dirty_state(bg_thresh, thresh); +} + +/** + * global_dirty_limits - background-writeback and dirty-throttling thresholds + * @pbackground: out parameter for bg_thresh + * @pdirty: out parameter for thresh + * + * Calculate bg_thresh and thresh for global_wb_domain. See + * domain_dirty_limits() for details. + */ +void global_dirty_limits(unsigned long *pbackground, unsigned long *pdirty) +{ + struct dirty_throttle_control gdtc = { GDTC_INIT_NO_WB }; + + gdtc.avail = global_dirtyable_memory(); + domain_dirty_limits(&gdtc); + + *pbackground = gdtc.bg_thresh; + *pdirty = gdtc.thresh; } /** @@ -392,47 +531,52 @@ static unsigned long wp_next_time(unsigned long cur_time) return cur_time; } -/* - * Increment the BDI's writeout completion count and the global writeout - * completion count. Called from test_clear_page_writeback(). - */ -static inline void __bdi_writeout_inc(struct backing_dev_info *bdi) +static void wb_domain_writeout_inc(struct wb_domain *dom, + struct fprop_local_percpu *completions, + unsigned int max_prop_frac) { - __inc_bdi_stat(bdi, BDI_WRITTEN); - __fprop_inc_percpu_max(&writeout_completions, &bdi->completions, - bdi->max_prop_frac); + __fprop_inc_percpu_max(&dom->completions, completions, + max_prop_frac); /* First event after period switching was turned off? */ - if (!unlikely(writeout_period_time)) { + if (!unlikely(dom->period_time)) { /* * We can race with other __bdi_writeout_inc calls here but * it does not cause any harm since the resulting time when * timer will fire and what is in writeout_period_time will be * roughly the same. */ - writeout_period_time = wp_next_time(jiffies); - mod_timer(&writeout_period_timer, writeout_period_time); + dom->period_time = wp_next_time(jiffies); + mod_timer(&dom->period_timer, dom->period_time); } } -void bdi_writeout_inc(struct backing_dev_info *bdi) +/* + * Increment @wb's writeout completion count and the global writeout + * completion count. Called from test_clear_page_writeback(). + */ +static inline void __wb_writeout_inc(struct bdi_writeback *wb) { - unsigned long flags; + struct wb_domain *cgdom; - local_irq_save(flags); - __bdi_writeout_inc(bdi); - local_irq_restore(flags); + __inc_wb_stat(wb, WB_WRITTEN); + wb_domain_writeout_inc(&global_wb_domain, &wb->completions, + wb->bdi->max_prop_frac); + + cgdom = mem_cgroup_wb_domain(wb); + if (cgdom) + wb_domain_writeout_inc(cgdom, wb_memcg_completions(wb), + wb->bdi->max_prop_frac); } -EXPORT_SYMBOL_GPL(bdi_writeout_inc); -/* - * Obtain an accurate fraction of the BDI's portion. - */ -static void bdi_writeout_fraction(struct backing_dev_info *bdi, - long *numerator, long *denominator) +void wb_writeout_inc(struct bdi_writeback *wb) { - fprop_fraction_percpu(&writeout_completions, &bdi->completions, - numerator, denominator); + unsigned long flags; + + local_irq_save(flags); + __wb_writeout_inc(wb); + local_irq_restore(flags); } +EXPORT_SYMBOL_GPL(wb_writeout_inc); /* * On idle system, we can be called long after we scheduled because we use @@ -440,22 +584,46 @@ static void bdi_writeout_fraction(struct backing_dev_info *bdi, */ static void writeout_period(unsigned long t) { - int miss_periods = (jiffies - writeout_period_time) / + struct wb_domain *dom = (void *)t; + int miss_periods = (jiffies - dom->period_time) / VM_COMPLETIONS_PERIOD_LEN; - if (fprop_new_period(&writeout_completions, miss_periods + 1)) { - writeout_period_time = wp_next_time(writeout_period_time + + if (fprop_new_period(&dom->completions, miss_periods + 1)) { + dom->period_time = wp_next_time(dom->period_time + miss_periods * VM_COMPLETIONS_PERIOD_LEN); - mod_timer(&writeout_period_timer, writeout_period_time); + mod_timer(&dom->period_timer, dom->period_time); } else { /* * Aging has zeroed all fractions. Stop wasting CPU on period * updates. */ - writeout_period_time = 0; + dom->period_time = 0; } } +int wb_domain_init(struct wb_domain *dom, gfp_t gfp) +{ + memset(dom, 0, sizeof(*dom)); + + spin_lock_init(&dom->lock); + + init_timer_deferrable(&dom->period_timer); + dom->period_timer.function = writeout_period; + dom->period_timer.data = (unsigned long)dom; + + dom->dirty_limit_tstamp = jiffies; + + return fprop_global_init(&dom->completions, gfp); +} + +#ifdef CONFIG_CGROUP_WRITEBACK +void wb_domain_exit(struct wb_domain *dom) +{ + del_timer_sync(&dom->period_timer); + fprop_global_destroy(&dom->completions); +} +#endif + /* * bdi_min_ratio keeps the sum of the minimum dirty shares of all * registered backing devices, which, for obvious reasons, can not @@ -510,17 +678,32 @@ static unsigned long dirty_freerun_ceiling(unsigned long thresh, return (thresh + bg_thresh) / 2; } -static unsigned long hard_dirty_limit(unsigned long thresh) +static unsigned long hard_dirty_limit(struct wb_domain *dom, + unsigned long thresh) +{ + return max(thresh, dom->dirty_limit); +} + +/* + * Memory which can be further allocated to a memcg domain is capped by + * system-wide clean memory excluding the amount being used in the domain. + */ +static void mdtc_calc_avail(struct dirty_throttle_control *mdtc, + unsigned long filepages, unsigned long headroom) { - return max(thresh, global_dirty_limit); + struct dirty_throttle_control *gdtc = mdtc_gdtc(mdtc); + unsigned long clean = filepages - min(filepages, mdtc->dirty); + unsigned long global_clean = gdtc->avail - min(gdtc->avail, gdtc->dirty); + unsigned long other_clean = global_clean - min(global_clean, clean); + + mdtc->avail = filepages + min(headroom, other_clean); } /** - * bdi_dirty_limit - @bdi's share of dirty throttling threshold - * @bdi: the backing_dev_info to query - * @dirty: global dirty limit in pages + * __wb_calc_thresh - @wb's share of dirty throttling threshold + * @dtc: dirty_throttle_context of interest * - * Returns @bdi's dirty limit in pages. The term "dirty" in the context of + * Returns @wb's dirty limit in pages. The term "dirty" in the context of * dirty balancing includes all PG_dirty, PG_writeback and NFS unstable pages. * * Note that balance_dirty_pages() will only seriously take it as a hard limit @@ -528,34 +711,47 @@ static unsigned long hard_dirty_limit(unsigned long thresh) * control. For example, when the device is completely stalled due to some error * conditions, or when there are 1000 dd tasks writing to a slow 10MB/s USB key. * In the other normal situations, it acts more gently by throttling the tasks - * more (rather than completely block them) when the bdi dirty pages go high. + * more (rather than completely block them) when the wb dirty pages go high. * * It allocates high/low dirty limits to fast/slow devices, in order to prevent * - starving fast devices * - piling up dirty pages (that will take long time to sync) on slow devices * - * The bdi's share of dirty limit will be adapting to its throughput and + * The wb's share of dirty limit will be adapting to its throughput and * bounded by the bdi->min_ratio and/or bdi->max_ratio parameters, if set. */ -unsigned long bdi_dirty_limit(struct backing_dev_info *bdi, unsigned long dirty) +static unsigned long __wb_calc_thresh(struct dirty_throttle_control *dtc) { - u64 bdi_dirty; + struct wb_domain *dom = dtc_dom(dtc); + unsigned long thresh = dtc->thresh; + u64 wb_thresh; long numerator, denominator; + unsigned long wb_min_ratio, wb_max_ratio; /* - * Calculate this BDI's share of the dirty ratio. + * Calculate this BDI's share of the thresh ratio. */ - bdi_writeout_fraction(bdi, &numerator, &denominator); + fprop_fraction_percpu(&dom->completions, dtc->wb_completions, + &numerator, &denominator); + + wb_thresh = (thresh * (100 - bdi_min_ratio)) / 100; + wb_thresh *= numerator; + do_div(wb_thresh, denominator); - bdi_dirty = (dirty * (100 - bdi_min_ratio)) / 100; - bdi_dirty *= numerator; - do_div(bdi_dirty, denominator); + wb_min_max_ratio(dtc->wb, &wb_min_ratio, &wb_max_ratio); - bdi_dirty += (dirty * bdi->min_ratio) / 100; - if (bdi_dirty > (dirty * bdi->max_ratio) / 100) - bdi_dirty = dirty * bdi->max_ratio / 100; + wb_thresh += (thresh * wb_min_ratio) / 100; + if (wb_thresh > (thresh * wb_max_ratio) / 100) + wb_thresh = thresh * wb_max_ratio / 100; - return bdi_dirty; + return wb_thresh; +} + +unsigned long wb_calc_thresh(struct bdi_writeback *wb, unsigned long thresh) +{ + struct dirty_throttle_control gdtc = { GDTC_INIT(wb), + .thresh = thresh }; + return __wb_calc_thresh(&gdtc); } /* @@ -594,7 +790,7 @@ static long long pos_ratio_polynom(unsigned long setpoint, * * (o) global/bdi setpoints * - * We want the dirty pages be balanced around the global/bdi setpoints. + * We want the dirty pages be balanced around the global/wb setpoints. * When the number of dirty pages is higher/lower than the setpoint, the * dirty position control ratio (and hence task dirty ratelimit) will be * decreased/increased to bring the dirty pages back to the setpoint. @@ -604,8 +800,8 @@ static long long pos_ratio_polynom(unsigned long setpoint, * if (dirty < setpoint) scale up pos_ratio * if (dirty > setpoint) scale down pos_ratio * - * if (bdi_dirty < bdi_setpoint) scale up pos_ratio - * if (bdi_dirty > bdi_setpoint) scale down pos_ratio + * if (wb_dirty < wb_setpoint) scale up pos_ratio + * if (wb_dirty > wb_setpoint) scale down pos_ratio * * task_ratelimit = dirty_ratelimit * pos_ratio >> RATELIMIT_CALC_SHIFT * @@ -630,7 +826,7 @@ static long long pos_ratio_polynom(unsigned long setpoint, * 0 +------------.------------------.----------------------*-------------> * freerun^ setpoint^ limit^ dirty pages * - * (o) bdi control line + * (o) wb control line * * ^ pos_ratio * | @@ -656,33 +852,32 @@ static long long pos_ratio_polynom(unsigned long setpoint, * | . . * | . . * 0 +----------------------.-------------------------------.-------------> - * bdi_setpoint^ x_intercept^ + * wb_setpoint^ x_intercept^ * - * The bdi control line won't drop below pos_ratio=1/4, so that bdi_dirty can + * The wb control line won't drop below pos_ratio=1/4, so that wb_dirty can * be smoothly throttled down to normal if it starts high in situations like * - start writing to a slow SD card and a fast disk at the same time. The SD - * card's bdi_dirty may rush to many times higher than bdi_setpoint. - * - the bdi dirty thresh drops quickly due to change of JBOD workload + * card's wb_dirty may rush to many times higher than wb_setpoint. + * - the wb dirty thresh drops quickly due to change of JBOD workload */ -static unsigned long bdi_position_ratio(struct backing_dev_info *bdi, - unsigned long thresh, - unsigned long bg_thresh, - unsigned long dirty, - unsigned long bdi_thresh, - unsigned long bdi_dirty) -{ - unsigned long write_bw = bdi->avg_write_bandwidth; - unsigned long freerun = dirty_freerun_ceiling(thresh, bg_thresh); - unsigned long limit = hard_dirty_limit(thresh); +static void wb_position_ratio(struct dirty_throttle_control *dtc) +{ + struct bdi_writeback *wb = dtc->wb; + unsigned long write_bw = wb->avg_write_bandwidth; + unsigned long freerun = dirty_freerun_ceiling(dtc->thresh, dtc->bg_thresh); + unsigned long limit = hard_dirty_limit(dtc_dom(dtc), dtc->thresh); + unsigned long wb_thresh = dtc->wb_thresh; unsigned long x_intercept; unsigned long setpoint; /* dirty pages' target balance point */ - unsigned long bdi_setpoint; + unsigned long wb_setpoint; unsigned long span; long long pos_ratio; /* for scaling up/down the rate limit */ long x; - if (unlikely(dirty >= limit)) - return 0; + dtc->pos_ratio = 0; + + if (unlikely(dtc->dirty >= limit)) + return; /* * global setpoint @@ -690,165 +885,167 @@ static unsigned long bdi_position_ratio(struct backing_dev_info *bdi, * See comment for pos_ratio_polynom(). */ setpoint = (freerun + limit) / 2; - pos_ratio = pos_ratio_polynom(setpoint, dirty, limit); + pos_ratio = pos_ratio_polynom(setpoint, dtc->dirty, limit); /* * The strictlimit feature is a tool preventing mistrusted filesystems * from growing a large number of dirty pages before throttling. For - * such filesystems balance_dirty_pages always checks bdi counters - * against bdi limits. Even if global "nr_dirty" is under "freerun". + * such filesystems balance_dirty_pages always checks wb counters + * against wb limits. Even if global "nr_dirty" is under "freerun". * This is especially important for fuse which sets bdi->max_ratio to * 1% by default. Without strictlimit feature, fuse writeback may * consume arbitrary amount of RAM because it is accounted in * NR_WRITEBACK_TEMP which is not involved in calculating "nr_dirty". * - * Here, in bdi_position_ratio(), we calculate pos_ratio based on - * two values: bdi_dirty and bdi_thresh. Let's consider an example: + * Here, in wb_position_ratio(), we calculate pos_ratio based on + * two values: wb_dirty and wb_thresh. Let's consider an example: * total amount of RAM is 16GB, bdi->max_ratio is equal to 1%, global * limits are set by default to 10% and 20% (background and throttle). - * Then bdi_thresh is 1% of 20% of 16GB. This amounts to ~8K pages. - * bdi_dirty_limit(bdi, bg_thresh) is about ~4K pages. bdi_setpoint is - * about ~6K pages (as the average of background and throttle bdi + * Then wb_thresh is 1% of 20% of 16GB. This amounts to ~8K pages. + * wb_calc_thresh(wb, bg_thresh) is about ~4K pages. wb_setpoint is + * about ~6K pages (as the average of background and throttle wb * limits). The 3rd order polynomial will provide positive feedback if - * bdi_dirty is under bdi_setpoint and vice versa. + * wb_dirty is under wb_setpoint and vice versa. * * Note, that we cannot use global counters in these calculations - * because we want to throttle process writing to a strictlimit BDI + * because we want to throttle process writing to a strictlimit wb * much earlier than global "freerun" is reached (~23MB vs. ~2.3GB * in the example above). */ - if (unlikely(bdi->capabilities & BDI_CAP_STRICTLIMIT)) { - long long bdi_pos_ratio; - unsigned long bdi_bg_thresh; + if (unlikely(wb->bdi->capabilities & BDI_CAP_STRICTLIMIT)) { + long long wb_pos_ratio; - if (bdi_dirty < 8) - return min_t(long long, pos_ratio * 2, - 2 << RATELIMIT_CALC_SHIFT); + if (dtc->wb_dirty < 8) { + dtc->pos_ratio = min_t(long long, pos_ratio * 2, + 2 << RATELIMIT_CALC_SHIFT); + return; + } - if (bdi_dirty >= bdi_thresh) - return 0; + if (dtc->wb_dirty >= wb_thresh) + return; - bdi_bg_thresh = div_u64((u64)bdi_thresh * bg_thresh, thresh); - bdi_setpoint = dirty_freerun_ceiling(bdi_thresh, - bdi_bg_thresh); + wb_setpoint = dirty_freerun_ceiling(wb_thresh, + dtc->wb_bg_thresh); - if (bdi_setpoint == 0 || bdi_setpoint == bdi_thresh) - return 0; + if (wb_setpoint == 0 || wb_setpoint == wb_thresh) + return; - bdi_pos_ratio = pos_ratio_polynom(bdi_setpoint, bdi_dirty, - bdi_thresh); + wb_pos_ratio = pos_ratio_polynom(wb_setpoint, dtc->wb_dirty, + wb_thresh); /* - * Typically, for strictlimit case, bdi_setpoint << setpoint - * and pos_ratio >> bdi_pos_ratio. In the other words global + * Typically, for strictlimit case, wb_setpoint << setpoint + * and pos_ratio >> wb_pos_ratio. In the other words global * state ("dirty") is not limiting factor and we have to - * make decision based on bdi counters. But there is an + * make decision based on wb counters. But there is an * important case when global pos_ratio should get precedence: * global limits are exceeded (e.g. due to activities on other - * BDIs) while given strictlimit BDI is below limit. + * wb's) while given strictlimit wb is below limit. * - * "pos_ratio * bdi_pos_ratio" would work for the case above, + * "pos_ratio * wb_pos_ratio" would work for the case above, * but it would look too non-natural for the case of all - * activity in the system coming from a single strictlimit BDI + * activity in the system coming from a single strictlimit wb * with bdi->max_ratio == 100%. * * Note that min() below somewhat changes the dynamics of the * control system. Normally, pos_ratio value can be well over 3 - * (when globally we are at freerun and bdi is well below bdi + * (when globally we are at freerun and wb is well below wb * setpoint). Now the maximum pos_ratio in the same situation * is 2. We might want to tweak this if we observe the control * system is too slow to adapt. */ - return min(pos_ratio, bdi_pos_ratio); + dtc->pos_ratio = min(pos_ratio, wb_pos_ratio); + return; } /* * We have computed basic pos_ratio above based on global situation. If - * the bdi is over/under its share of dirty pages, we want to scale + * the wb is over/under its share of dirty pages, we want to scale * pos_ratio further down/up. That is done by the following mechanism. */ /* - * bdi setpoint + * wb setpoint * - * f(bdi_dirty) := 1.0 + k * (bdi_dirty - bdi_setpoint) + * f(wb_dirty) := 1.0 + k * (wb_dirty - wb_setpoint) * - * x_intercept - bdi_dirty + * x_intercept - wb_dirty * := -------------------------- - * x_intercept - bdi_setpoint + * x_intercept - wb_setpoint * - * The main bdi control line is a linear function that subjects to + * The main wb control line is a linear function that subjects to * - * (1) f(bdi_setpoint) = 1.0 - * (2) k = - 1 / (8 * write_bw) (in single bdi case) - * or equally: x_intercept = bdi_setpoint + 8 * write_bw + * (1) f(wb_setpoint) = 1.0 + * (2) k = - 1 / (8 * write_bw) (in single wb case) + * or equally: x_intercept = wb_setpoint + 8 * write_bw * - * For single bdi case, the dirty pages are observed to fluctuate + * For single wb case, the dirty pages are observed to fluctuate * regularly within range - * [bdi_setpoint - write_bw/2, bdi_setpoint + write_bw/2] + * [wb_setpoint - write_bw/2, wb_setpoint + write_bw/2] * for various filesystems, where (2) can yield in a reasonable 12.5% * fluctuation range for pos_ratio. * - * For JBOD case, bdi_thresh (not bdi_dirty!) could fluctuate up to its + * For JBOD case, wb_thresh (not wb_dirty!) could fluctuate up to its * own size, so move the slope over accordingly and choose a slope that - * yields 100% pos_ratio fluctuation on suddenly doubled bdi_thresh. + * yields 100% pos_ratio fluctuation on suddenly doubled wb_thresh. */ - if (unlikely(bdi_thresh > thresh)) - bdi_thresh = thresh; + if (unlikely(wb_thresh > dtc->thresh)) + wb_thresh = dtc->thresh; /* - * It's very possible that bdi_thresh is close to 0 not because the + * It's very possible that wb_thresh is close to 0 not because the * device is slow, but that it has remained inactive for long time. * Honour such devices a reasonable good (hopefully IO efficient) * threshold, so that the occasional writes won't be blocked and active * writes can rampup the threshold quickly. */ - bdi_thresh = max(bdi_thresh, (limit - dirty) / 8); + wb_thresh = max(wb_thresh, (limit - dtc->dirty) / 8); /* - * scale global setpoint to bdi's: - * bdi_setpoint = setpoint * bdi_thresh / thresh + * scale global setpoint to wb's: + * wb_setpoint = setpoint * wb_thresh / thresh */ - x = div_u64((u64)bdi_thresh << 16, thresh | 1); - bdi_setpoint = setpoint * (u64)x >> 16; + x = div_u64((u64)wb_thresh << 16, dtc->thresh | 1); + wb_setpoint = setpoint * (u64)x >> 16; /* - * Use span=(8*write_bw) in single bdi case as indicated by - * (thresh - bdi_thresh ~= 0) and transit to bdi_thresh in JBOD case. + * Use span=(8*write_bw) in single wb case as indicated by + * (thresh - wb_thresh ~= 0) and transit to wb_thresh in JBOD case. * - * bdi_thresh thresh - bdi_thresh - * span = ---------- * (8 * write_bw) + ------------------- * bdi_thresh - * thresh thresh + * wb_thresh thresh - wb_thresh + * span = --------- * (8 * write_bw) + ------------------ * wb_thresh + * thresh thresh */ - span = (thresh - bdi_thresh + 8 * write_bw) * (u64)x >> 16; - x_intercept = bdi_setpoint + span; + span = (dtc->thresh - wb_thresh + 8 * write_bw) * (u64)x >> 16; + x_intercept = wb_setpoint + span; - if (bdi_dirty < x_intercept - span / 4) { - pos_ratio = div64_u64(pos_ratio * (x_intercept - bdi_dirty), - (x_intercept - bdi_setpoint) | 1); + if (dtc->wb_dirty < x_intercept - span / 4) { + pos_ratio = div64_u64(pos_ratio * (x_intercept - dtc->wb_dirty), + (x_intercept - wb_setpoint) | 1); } else pos_ratio /= 4; /* - * bdi reserve area, safeguard against dirty pool underrun and disk idle + * wb reserve area, safeguard against dirty pool underrun and disk idle * It may push the desired control point of global dirty pages higher * than setpoint. */ - x_intercept = bdi_thresh / 2; - if (bdi_dirty < x_intercept) { - if (bdi_dirty > x_intercept / 8) - pos_ratio = div_u64(pos_ratio * x_intercept, bdi_dirty); + x_intercept = wb_thresh / 2; + if (dtc->wb_dirty < x_intercept) { + if (dtc->wb_dirty > x_intercept / 8) + pos_ratio = div_u64(pos_ratio * x_intercept, + dtc->wb_dirty); else pos_ratio *= 8; } - return pos_ratio; + dtc->pos_ratio = pos_ratio; } -static void bdi_update_write_bandwidth(struct backing_dev_info *bdi, - unsigned long elapsed, - unsigned long written) +static void wb_update_write_bandwidth(struct bdi_writeback *wb, + unsigned long elapsed, + unsigned long written) { const unsigned long period = roundup_pow_of_two(3 * HZ); - unsigned long avg = bdi->avg_write_bandwidth; - unsigned long old = bdi->write_bandwidth; + unsigned long avg = wb->avg_write_bandwidth; + unsigned long old = wb->write_bandwidth; u64 bw; /* @@ -861,14 +1058,14 @@ static void bdi_update_write_bandwidth(struct backing_dev_info *bdi, * @written may have decreased due to account_page_redirty(). * Avoid underflowing @bw calculation. */ - bw = written - min(written, bdi->written_stamp); + bw = written - min(written, wb->written_stamp); bw *= HZ; if (unlikely(elapsed > period)) { do_div(bw, elapsed); avg = bw; goto out; } - bw += (u64)bdi->write_bandwidth * (period - elapsed); + bw += (u64)wb->write_bandwidth * (period - elapsed); bw >>= ilog2(period); /* @@ -881,21 +1078,22 @@ static void bdi_update_write_bandwidth(struct backing_dev_info *bdi, avg += (old - avg) >> 3; out: - bdi->write_bandwidth = bw; - bdi->avg_write_bandwidth = avg; + /* keep avg > 0 to guarantee that tot > 0 if there are dirty wbs */ + avg = max(avg, 1LU); + if (wb_has_dirty_io(wb)) { + long delta = avg - wb->avg_write_bandwidth; + WARN_ON_ONCE(atomic_long_add_return(delta, + &wb->bdi->tot_write_bandwidth) <= 0); + } + wb->write_bandwidth = bw; + wb->avg_write_bandwidth = avg; } -/* - * The global dirtyable memory and dirty threshold could be suddenly knocked - * down by a large amount (eg. on the startup of KVM in a swapless system). - * This may throw the system into deep dirty exceeded state and throttle - * heavy/light dirtiers alike. To retain good responsiveness, maintain - * global_dirty_limit for tracking slowly down to the knocked down dirty - * threshold. - */ -static void update_dirty_limit(unsigned long thresh, unsigned long dirty) +static void update_dirty_limit(struct dirty_throttle_control *dtc) { - unsigned long limit = global_dirty_limit; + struct wb_domain *dom = dtc_dom(dtc); + unsigned long thresh = dtc->thresh; + unsigned long limit = dom->dirty_limit; /* * Follow up in one step. @@ -908,63 +1106,57 @@ static void update_dirty_limit(unsigned long thresh, unsigned long dirty) /* * Follow down slowly. Use the higher one as the target, because thresh * may drop below dirty. This is exactly the reason to introduce - * global_dirty_limit which is guaranteed to lie above the dirty pages. + * dom->dirty_limit which is guaranteed to lie above the dirty pages. */ - thresh = max(thresh, dirty); + thresh = max(thresh, dtc->dirty); if (limit > thresh) { limit -= (limit - thresh) >> 5; goto update; } return; update: - global_dirty_limit = limit; + dom->dirty_limit = limit; } -static void global_update_bandwidth(unsigned long thresh, - unsigned long dirty, +static void domain_update_bandwidth(struct dirty_throttle_control *dtc, unsigned long now) { - static DEFINE_SPINLOCK(dirty_lock); - static unsigned long update_time = INITIAL_JIFFIES; + struct wb_domain *dom = dtc_dom(dtc); /* * check locklessly first to optimize away locking for the most time */ - if (time_before(now, update_time + BANDWIDTH_INTERVAL)) + if (time_before(now, dom->dirty_limit_tstamp + BANDWIDTH_INTERVAL)) return; - spin_lock(&dirty_lock); - if (time_after_eq(now, update_time + BANDWIDTH_INTERVAL)) { - update_dirty_limit(thresh, dirty); - update_time = now; + spin_lock(&dom->lock); + if (time_after_eq(now, dom->dirty_limit_tstamp + BANDWIDTH_INTERVAL)) { + update_dirty_limit(dtc); + dom->dirty_limit_tstamp = now; } - spin_unlock(&dirty_lock); + spin_unlock(&dom->lock); } /* - * Maintain bdi->dirty_ratelimit, the base dirty throttle rate. + * Maintain wb->dirty_ratelimit, the base dirty throttle rate. * - * Normal bdi tasks will be curbed at or below it in long term. + * Normal wb tasks will be curbed at or below it in long term. * Obviously it should be around (write_bw / N) when there are N dd tasks. */ -static void bdi_update_dirty_ratelimit(struct backing_dev_info *bdi, - unsigned long thresh, - unsigned long bg_thresh, - unsigned long dirty, - unsigned long bdi_thresh, - unsigned long bdi_dirty, - unsigned long dirtied, - unsigned long elapsed) -{ - unsigned long freerun = dirty_freerun_ceiling(thresh, bg_thresh); - unsigned long limit = hard_dirty_limit(thresh); +static void wb_update_dirty_ratelimit(struct dirty_throttle_control *dtc, + unsigned long dirtied, + unsigned long elapsed) +{ + struct bdi_writeback *wb = dtc->wb; + unsigned long dirty = dtc->dirty; + unsigned long freerun = dirty_freerun_ceiling(dtc->thresh, dtc->bg_thresh); + unsigned long limit = hard_dirty_limit(dtc_dom(dtc), dtc->thresh); unsigned long setpoint = (freerun + limit) / 2; - unsigned long write_bw = bdi->avg_write_bandwidth; - unsigned long dirty_ratelimit = bdi->dirty_ratelimit; + unsigned long write_bw = wb->avg_write_bandwidth; + unsigned long dirty_ratelimit = wb->dirty_ratelimit; unsigned long dirty_rate; unsigned long task_ratelimit; unsigned long balanced_dirty_ratelimit; - unsigned long pos_ratio; unsigned long step; unsigned long x; @@ -972,20 +1164,18 @@ static void bdi_update_dirty_ratelimit(struct backing_dev_info *bdi, * The dirty rate will match the writeout rate in long term, except * when dirty pages are truncated by userspace or re-dirtied by FS. */ - dirty_rate = (dirtied - bdi->dirtied_stamp) * HZ / elapsed; + dirty_rate = (dirtied - wb->dirtied_stamp) * HZ / elapsed; - pos_ratio = bdi_position_ratio(bdi, thresh, bg_thresh, dirty, - bdi_thresh, bdi_dirty); /* * task_ratelimit reflects each dd's dirty rate for the past 200ms. */ task_ratelimit = (u64)dirty_ratelimit * - pos_ratio >> RATELIMIT_CALC_SHIFT; + dtc->pos_ratio >> RATELIMIT_CALC_SHIFT; task_ratelimit++; /* it helps rampup dirty_ratelimit from tiny values */ /* * A linear estimation of the "balanced" throttle rate. The theory is, - * if there are N dd tasks, each throttled at task_ratelimit, the bdi's + * if there are N dd tasks, each throttled at task_ratelimit, the wb's * dirty_rate will be measured to be (N * task_ratelimit). So the below * formula will yield the balanced rate limit (write_bw / N). * @@ -1024,7 +1214,7 @@ static void bdi_update_dirty_ratelimit(struct backing_dev_info *bdi, /* * We could safely do this and return immediately: * - * bdi->dirty_ratelimit = balanced_dirty_ratelimit; + * wb->dirty_ratelimit = balanced_dirty_ratelimit; * * However to get a more stable dirty_ratelimit, the below elaborated * code makes use of task_ratelimit to filter out singular points and @@ -1058,32 +1248,31 @@ static void bdi_update_dirty_ratelimit(struct backing_dev_info *bdi, step = 0; /* - * For strictlimit case, calculations above were based on bdi counters - * and limits (starting from pos_ratio = bdi_position_ratio() and up to + * For strictlimit case, calculations above were based on wb counters + * and limits (starting from pos_ratio = wb_position_ratio() and up to * balanced_dirty_ratelimit = task_ratelimit * write_bw / dirty_rate). - * Hence, to calculate "step" properly, we have to use bdi_dirty as - * "dirty" and bdi_setpoint as "setpoint". + * Hence, to calculate "step" properly, we have to use wb_dirty as + * "dirty" and wb_setpoint as "setpoint". * - * We rampup dirty_ratelimit forcibly if bdi_dirty is low because - * it's possible that bdi_thresh is close to zero due to inactivity - * of backing device (see the implementation of bdi_dirty_limit()). + * We rampup dirty_ratelimit forcibly if wb_dirty is low because + * it's possible that wb_thresh is close to zero due to inactivity + * of backing device. */ - if (unlikely(bdi->capabilities & BDI_CAP_STRICTLIMIT)) { - dirty = bdi_dirty; - if (bdi_dirty < 8) - setpoint = bdi_dirty + 1; + if (unlikely(wb->bdi->capabilities & BDI_CAP_STRICTLIMIT)) { + dirty = dtc->wb_dirty; + if (dtc->wb_dirty < 8) + setpoint = dtc->wb_dirty + 1; else - setpoint = (bdi_thresh + - bdi_dirty_limit(bdi, bg_thresh)) / 2; + setpoint = (dtc->wb_thresh + dtc->wb_bg_thresh) / 2; } if (dirty < setpoint) { - x = min3(bdi->balanced_dirty_ratelimit, + x = min3(wb->balanced_dirty_ratelimit, balanced_dirty_ratelimit, task_ratelimit); if (dirty_ratelimit < x) step = x - dirty_ratelimit; } else { - x = max3(bdi->balanced_dirty_ratelimit, + x = max3(wb->balanced_dirty_ratelimit, balanced_dirty_ratelimit, task_ratelimit); if (dirty_ratelimit > x) step = dirty_ratelimit - x; @@ -1105,69 +1294,67 @@ static void bdi_update_dirty_ratelimit(struct backing_dev_info *bdi, else dirty_ratelimit -= step; - bdi->dirty_ratelimit = max(dirty_ratelimit, 1UL); - bdi->balanced_dirty_ratelimit = balanced_dirty_ratelimit; + wb->dirty_ratelimit = max(dirty_ratelimit, 1UL); + wb->balanced_dirty_ratelimit = balanced_dirty_ratelimit; - trace_bdi_dirty_ratelimit(bdi, dirty_rate, task_ratelimit); + trace_bdi_dirty_ratelimit(wb, dirty_rate, task_ratelimit); } -void __bdi_update_bandwidth(struct backing_dev_info *bdi, - unsigned long thresh, - unsigned long bg_thresh, - unsigned long dirty, - unsigned long bdi_thresh, - unsigned long bdi_dirty, - unsigned long start_time) +static void __wb_update_bandwidth(struct dirty_throttle_control *gdtc, + struct dirty_throttle_control *mdtc, + unsigned long start_time, + bool update_ratelimit) { + struct bdi_writeback *wb = gdtc->wb; unsigned long now = jiffies; - unsigned long elapsed = now - bdi->bw_time_stamp; + unsigned long elapsed = now - wb->bw_time_stamp; unsigned long dirtied; unsigned long written; + lockdep_assert_held(&wb->list_lock); + /* * rate-limit, only update once every 200ms. */ if (elapsed < BANDWIDTH_INTERVAL) return; - dirtied = percpu_counter_read(&bdi->bdi_stat[BDI_DIRTIED]); - written = percpu_counter_read(&bdi->bdi_stat[BDI_WRITTEN]); + dirtied = percpu_counter_read(&wb->stat[WB_DIRTIED]); + written = percpu_counter_read(&wb->stat[WB_WRITTEN]); /* * Skip quiet periods when disk bandwidth is under-utilized. * (at least 1s idle time between two flusher runs) */ - if (elapsed > HZ && time_before(bdi->bw_time_stamp, start_time)) + if (elapsed > HZ && time_before(wb->bw_time_stamp, start_time)) goto snapshot; - if (thresh) { - global_update_bandwidth(thresh, dirty, now); - bdi_update_dirty_ratelimit(bdi, thresh, bg_thresh, dirty, - bdi_thresh, bdi_dirty, - dirtied, elapsed); + if (update_ratelimit) { + domain_update_bandwidth(gdtc, now); + wb_update_dirty_ratelimit(gdtc, dirtied, elapsed); + + /* + * @mdtc is always NULL if !CGROUP_WRITEBACK but the + * compiler has no way to figure that out. Help it. + */ + if (IS_ENABLED(CONFIG_CGROUP_WRITEBACK) && mdtc) { + domain_update_bandwidth(mdtc, now); + wb_update_dirty_ratelimit(mdtc, dirtied, elapsed); + } } - bdi_update_write_bandwidth(bdi, elapsed, written); + wb_update_write_bandwidth(wb, elapsed, written); snapshot: - bdi->dirtied_stamp = dirtied; - bdi->written_stamp = written; - bdi->bw_time_stamp = now; + wb->dirtied_stamp = dirtied; + wb->written_stamp = written; + wb->bw_time_stamp = now; } -static void bdi_update_bandwidth(struct backing_dev_info *bdi, - unsigned long thresh, - unsigned long bg_thresh, - unsigned long dirty, - unsigned long bdi_thresh, - unsigned long bdi_dirty, - unsigned long start_time) +void wb_update_bandwidth(struct bdi_writeback *wb, unsigned long start_time) { - if (time_is_after_eq_jiffies(bdi->bw_time_stamp + BANDWIDTH_INTERVAL)) - return; - spin_lock(&bdi->wb.list_lock); - __bdi_update_bandwidth(bdi, thresh, bg_thresh, dirty, - bdi_thresh, bdi_dirty, start_time); - spin_unlock(&bdi->wb.list_lock); + struct dirty_throttle_control gdtc = { GDTC_INIT(wb) }; + + __wb_update_bandwidth(&gdtc, NULL, start_time, false); } /* @@ -1187,10 +1374,10 @@ static unsigned long dirty_poll_interval(unsigned long dirty, return 1; } -static unsigned long bdi_max_pause(struct backing_dev_info *bdi, - unsigned long bdi_dirty) +static unsigned long wb_max_pause(struct bdi_writeback *wb, + unsigned long wb_dirty) { - unsigned long bw = bdi->avg_write_bandwidth; + unsigned long bw = wb->avg_write_bandwidth; unsigned long t; /* @@ -1200,20 +1387,20 @@ static unsigned long bdi_max_pause(struct backing_dev_info *bdi, * * 8 serves as the safety ratio. */ - t = bdi_dirty / (1 + bw / roundup_pow_of_two(1 + HZ / 8)); + t = wb_dirty / (1 + bw / roundup_pow_of_two(1 + HZ / 8)); t++; return min_t(unsigned long, t, MAX_PAUSE); } -static long bdi_min_pause(struct backing_dev_info *bdi, - long max_pause, - unsigned long task_ratelimit, - unsigned long dirty_ratelimit, - int *nr_dirtied_pause) +static long wb_min_pause(struct bdi_writeback *wb, + long max_pause, + unsigned long task_ratelimit, + unsigned long dirty_ratelimit, + int *nr_dirtied_pause) { - long hi = ilog2(bdi->avg_write_bandwidth); - long lo = ilog2(bdi->dirty_ratelimit); + long hi = ilog2(wb->avg_write_bandwidth); + long lo = ilog2(wb->dirty_ratelimit); long t; /* target pause */ long pause; /* estimated next pause */ int pages; /* target nr_dirtied_pause */ @@ -1281,34 +1468,27 @@ static long bdi_min_pause(struct backing_dev_info *bdi, return pages >= DIRTY_POLL_THRESH ? 1 + t / 2 : t; } -static inline void bdi_dirty_limits(struct backing_dev_info *bdi, - unsigned long dirty_thresh, - unsigned long background_thresh, - unsigned long *bdi_dirty, - unsigned long *bdi_thresh, - unsigned long *bdi_bg_thresh) +static inline void wb_dirty_limits(struct dirty_throttle_control *dtc) { - unsigned long bdi_reclaimable; + struct bdi_writeback *wb = dtc->wb; + unsigned long wb_reclaimable; /* - * bdi_thresh is not treated as some limiting factor as + * wb_thresh is not treated as some limiting factor as * dirty_thresh, due to reasons - * - in JBOD setup, bdi_thresh can fluctuate a lot + * - in JBOD setup, wb_thresh can fluctuate a lot * - in a system with HDD and USB key, the USB key may somehow - * go into state (bdi_dirty >> bdi_thresh) either because - * bdi_dirty starts high, or because bdi_thresh drops low. + * go into state (wb_dirty >> wb_thresh) either because + * wb_dirty starts high, or because wb_thresh drops low. * In this case we don't want to hard throttle the USB key - * dirtiers for 100 seconds until bdi_dirty drops under - * bdi_thresh. Instead the auxiliary bdi control line in - * bdi_position_ratio() will let the dirtier task progress - * at some rate <= (write_bw / 2) for bringing down bdi_dirty. + * dirtiers for 100 seconds until wb_dirty drops under + * wb_thresh. Instead the auxiliary wb control line in + * wb_position_ratio() will let the dirtier task progress + * at some rate <= (write_bw / 2) for bringing down wb_dirty. */ - *bdi_thresh = bdi_dirty_limit(bdi, dirty_thresh); - - if (bdi_bg_thresh) - *bdi_bg_thresh = dirty_thresh ? div_u64((u64)*bdi_thresh * - background_thresh, - dirty_thresh) : 0; + dtc->wb_thresh = __wb_calc_thresh(dtc); + dtc->wb_bg_thresh = dtc->thresh ? + div_u64((u64)dtc->wb_thresh * dtc->bg_thresh, dtc->thresh) : 0; /* * In order to avoid the stacked BDI deadlock we need @@ -1320,14 +1500,12 @@ static inline void bdi_dirty_limits(struct backing_dev_info *bdi, * actually dirty; with m+n sitting in the percpu * deltas. */ - if (*bdi_thresh < 2 * bdi_stat_error(bdi)) { - bdi_reclaimable = bdi_stat_sum(bdi, BDI_RECLAIMABLE); - *bdi_dirty = bdi_reclaimable + - bdi_stat_sum(bdi, BDI_WRITEBACK); + if (dtc->wb_thresh < 2 * wb_stat_error(wb)) { + wb_reclaimable = wb_stat_sum(wb, WB_RECLAIMABLE); + dtc->wb_dirty = wb_reclaimable + wb_stat_sum(wb, WB_WRITEBACK); } else { - bdi_reclaimable = bdi_stat(bdi, BDI_RECLAIMABLE); - *bdi_dirty = bdi_reclaimable + - bdi_stat(bdi, BDI_WRITEBACK); + wb_reclaimable = wb_stat(wb, WB_RECLAIMABLE); + dtc->wb_dirty = wb_reclaimable + wb_stat(wb, WB_WRITEBACK); } } @@ -1339,12 +1517,16 @@ static inline void bdi_dirty_limits(struct backing_dev_info *bdi, * perform some writeout. */ static void balance_dirty_pages(struct address_space *mapping, + struct bdi_writeback *wb, unsigned long pages_dirtied) { + struct dirty_throttle_control gdtc_stor = { GDTC_INIT(wb) }; + struct dirty_throttle_control mdtc_stor = { MDTC_INIT(wb, &gdtc_stor) }; + struct dirty_throttle_control * const gdtc = &gdtc_stor; + struct dirty_throttle_control * const mdtc = mdtc_valid(&mdtc_stor) ? + &mdtc_stor : NULL; + struct dirty_throttle_control *sdtc; unsigned long nr_reclaimable; /* = file_dirty + unstable_nfs */ - unsigned long nr_dirty; /* = file_dirty + writeback + unstable_nfs */ - unsigned long background_thresh; - unsigned long dirty_thresh; long period; long pause; long max_pause; @@ -1353,18 +1535,16 @@ static void balance_dirty_pages(struct address_space *mapping, bool dirty_exceeded = false; unsigned long task_ratelimit; unsigned long dirty_ratelimit; - unsigned long pos_ratio; - struct backing_dev_info *bdi = inode_to_bdi(mapping->host); + struct backing_dev_info *bdi = wb->bdi; bool strictlimit = bdi->capabilities & BDI_CAP_STRICTLIMIT; unsigned long start_time = jiffies; for (;;) { unsigned long now = jiffies; - unsigned long uninitialized_var(bdi_thresh); - unsigned long thresh; - unsigned long uninitialized_var(bdi_dirty); - unsigned long dirty; - unsigned long bg_thresh; + unsigned long dirty, thresh, bg_thresh; + unsigned long m_dirty = 0; /* stop bogus uninit warnings */ + unsigned long m_thresh = 0; + unsigned long m_bg_thresh = 0; /* * Unstable writes are a feature of certain networked @@ -1374,65 +1554,127 @@ static void balance_dirty_pages(struct address_space *mapping, */ nr_reclaimable = global_page_state(NR_FILE_DIRTY) + global_page_state(NR_UNSTABLE_NFS); - nr_dirty = nr_reclaimable + global_page_state(NR_WRITEBACK); + gdtc->avail = global_dirtyable_memory(); + gdtc->dirty = nr_reclaimable + global_page_state(NR_WRITEBACK); - global_dirty_limits(&background_thresh, &dirty_thresh); + domain_dirty_limits(gdtc); if (unlikely(strictlimit)) { - bdi_dirty_limits(bdi, dirty_thresh, background_thresh, - &bdi_dirty, &bdi_thresh, &bg_thresh); + wb_dirty_limits(gdtc); - dirty = bdi_dirty; - thresh = bdi_thresh; + dirty = gdtc->wb_dirty; + thresh = gdtc->wb_thresh; + bg_thresh = gdtc->wb_bg_thresh; } else { - dirty = nr_dirty; - thresh = dirty_thresh; - bg_thresh = background_thresh; + dirty = gdtc->dirty; + thresh = gdtc->thresh; + bg_thresh = gdtc->bg_thresh; + } + + if (mdtc) { + unsigned long filepages, headroom, writeback; + + /* + * If @wb belongs to !root memcg, repeat the same + * basic calculations for the memcg domain. + */ + mem_cgroup_wb_stats(wb, &filepages, &headroom, + &mdtc->dirty, &writeback); + mdtc->dirty += writeback; + mdtc_calc_avail(mdtc, filepages, headroom); + + domain_dirty_limits(mdtc); + + if (unlikely(strictlimit)) { + wb_dirty_limits(mdtc); + m_dirty = mdtc->wb_dirty; + m_thresh = mdtc->wb_thresh; + m_bg_thresh = mdtc->wb_bg_thresh; + } else { + m_dirty = mdtc->dirty; + m_thresh = mdtc->thresh; + m_bg_thresh = mdtc->bg_thresh; + } } /* * Throttle it only when the background writeback cannot * catch-up. This avoids (excessively) small writeouts - * when the bdi limits are ramping up in case of !strictlimit. + * when the wb limits are ramping up in case of !strictlimit. * - * In strictlimit case make decision based on the bdi counters - * and limits. Small writeouts when the bdi limits are ramping + * In strictlimit case make decision based on the wb counters + * and limits. Small writeouts when the wb limits are ramping * up are the price we consciously pay for strictlimit-ing. + * + * If memcg domain is in effect, @dirty should be under + * both global and memcg freerun ceilings. */ - if (dirty <= dirty_freerun_ceiling(thresh, bg_thresh)) { + if (dirty <= dirty_freerun_ceiling(thresh, bg_thresh) && + (!mdtc || + m_dirty <= dirty_freerun_ceiling(m_thresh, m_bg_thresh))) { + unsigned long intv = dirty_poll_interval(dirty, thresh); + unsigned long m_intv = ULONG_MAX; + current->dirty_paused_when = now; current->nr_dirtied = 0; - current->nr_dirtied_pause = - dirty_poll_interval(dirty, thresh); + if (mdtc) + m_intv = dirty_poll_interval(m_dirty, m_thresh); + current->nr_dirtied_pause = min(intv, m_intv); break; } - if (unlikely(!writeback_in_progress(bdi))) - bdi_start_background_writeback(bdi); + if (unlikely(!writeback_in_progress(wb))) + wb_start_background_writeback(wb); + /* + * Calculate global domain's pos_ratio and select the + * global dtc by default. + */ if (!strictlimit) - bdi_dirty_limits(bdi, dirty_thresh, background_thresh, - &bdi_dirty, &bdi_thresh, NULL); - - dirty_exceeded = (bdi_dirty > bdi_thresh) && - ((nr_dirty > dirty_thresh) || strictlimit); - if (dirty_exceeded && !bdi->dirty_exceeded) - bdi->dirty_exceeded = 1; - - bdi_update_bandwidth(bdi, dirty_thresh, background_thresh, - nr_dirty, bdi_thresh, bdi_dirty, - start_time); - - dirty_ratelimit = bdi->dirty_ratelimit; - pos_ratio = bdi_position_ratio(bdi, dirty_thresh, - background_thresh, nr_dirty, - bdi_thresh, bdi_dirty); - task_ratelimit = ((u64)dirty_ratelimit * pos_ratio) >> + wb_dirty_limits(gdtc); + + dirty_exceeded = (gdtc->wb_dirty > gdtc->wb_thresh) && + ((gdtc->dirty > gdtc->thresh) || strictlimit); + + wb_position_ratio(gdtc); + sdtc = gdtc; + + if (mdtc) { + /* + * If memcg domain is in effect, calculate its + * pos_ratio. @wb should satisfy constraints from + * both global and memcg domains. Choose the one + * w/ lower pos_ratio. + */ + if (!strictlimit) + wb_dirty_limits(mdtc); + + dirty_exceeded |= (mdtc->wb_dirty > mdtc->wb_thresh) && + ((mdtc->dirty > mdtc->thresh) || strictlimit); + + wb_position_ratio(mdtc); + if (mdtc->pos_ratio < gdtc->pos_ratio) + sdtc = mdtc; + } + + if (dirty_exceeded && !wb->dirty_exceeded) + wb->dirty_exceeded = 1; + + if (time_is_before_jiffies(wb->bw_time_stamp + + BANDWIDTH_INTERVAL)) { + spin_lock(&wb->list_lock); + __wb_update_bandwidth(gdtc, mdtc, start_time, true); + spin_unlock(&wb->list_lock); + } + + /* throttle according to the chosen dtc */ + dirty_ratelimit = wb->dirty_ratelimit; + task_ratelimit = ((u64)dirty_ratelimit * sdtc->pos_ratio) >> RATELIMIT_CALC_SHIFT; - max_pause = bdi_max_pause(bdi, bdi_dirty); - min_pause = bdi_min_pause(bdi, max_pause, - task_ratelimit, dirty_ratelimit, - &nr_dirtied_pause); + max_pause = wb_max_pause(wb, sdtc->wb_dirty); + min_pause = wb_min_pause(wb, max_pause, + task_ratelimit, dirty_ratelimit, + &nr_dirtied_pause); if (unlikely(task_ratelimit == 0)) { period = max_pause; @@ -1451,12 +1693,12 @@ static void balance_dirty_pages(struct address_space *mapping, * do a reset, as it may be a light dirtier. */ if (pause < min_pause) { - trace_balance_dirty_pages(bdi, - dirty_thresh, - background_thresh, - nr_dirty, - bdi_thresh, - bdi_dirty, + trace_balance_dirty_pages(wb, + sdtc->thresh, + sdtc->bg_thresh, + sdtc->dirty, + sdtc->wb_thresh, + sdtc->wb_dirty, dirty_ratelimit, task_ratelimit, pages_dirtied, @@ -1480,12 +1722,12 @@ static void balance_dirty_pages(struct address_space *mapping, } pause: - trace_balance_dirty_pages(bdi, - dirty_thresh, - background_thresh, - nr_dirty, - bdi_thresh, - bdi_dirty, + trace_balance_dirty_pages(wb, + sdtc->thresh, + sdtc->bg_thresh, + sdtc->dirty, + sdtc->wb_thresh, + sdtc->wb_dirty, dirty_ratelimit, task_ratelimit, pages_dirtied, @@ -1500,33 +1742,33 @@ pause: current->nr_dirtied_pause = nr_dirtied_pause; /* - * This is typically equal to (nr_dirty < dirty_thresh) and can - * also keep "1000+ dd on a slow USB stick" under control. + * This is typically equal to (dirty < thresh) and can also + * keep "1000+ dd on a slow USB stick" under control. */ if (task_ratelimit) break; /* * In the case of an unresponding NFS server and the NFS dirty - * pages exceeds dirty_thresh, give the other good bdi's a pipe + * pages exceeds dirty_thresh, give the other good wb's a pipe * to go through, so that tasks on them still remain responsive. * * In theory 1 page is enough to keep the comsumer-producer * pipe going: the flusher cleans 1 page => the task dirties 1 - * more page. However bdi_dirty has accounting errors. So use - * the larger and more IO friendly bdi_stat_error. + * more page. However wb_dirty has accounting errors. So use + * the larger and more IO friendly wb_stat_error. */ - if (bdi_dirty <= bdi_stat_error(bdi)) + if (sdtc->wb_dirty <= wb_stat_error(wb)) break; if (fatal_signal_pending(current)) break; } - if (!dirty_exceeded && bdi->dirty_exceeded) - bdi->dirty_exceeded = 0; + if (!dirty_exceeded && wb->dirty_exceeded) + wb->dirty_exceeded = 0; - if (writeback_in_progress(bdi)) + if (writeback_in_progress(wb)) return; /* @@ -1540,8 +1782,8 @@ pause: if (laptop_mode) return; - if (nr_reclaimable > background_thresh) - bdi_start_background_writeback(bdi); + if (nr_reclaimable > gdtc->bg_thresh) + wb_start_background_writeback(wb); } static DEFINE_PER_CPU(int, bdp_ratelimits); @@ -1577,15 +1819,22 @@ DEFINE_PER_CPU(int, dirty_throttle_leaks) = 0; */ void balance_dirty_pages_ratelimited(struct address_space *mapping) { - struct backing_dev_info *bdi = inode_to_bdi(mapping->host); + struct inode *inode = mapping->host; + struct backing_dev_info *bdi = inode_to_bdi(inode); + struct bdi_writeback *wb = NULL; int ratelimit; int *p; if (!bdi_cap_account_dirty(bdi)) return; + if (inode_cgwb_enabled(inode)) + wb = wb_get_create_current(bdi, GFP_KERNEL); + if (!wb) + wb = &bdi->wb; + ratelimit = current->nr_dirtied_pause; - if (bdi->dirty_exceeded) + if (wb->dirty_exceeded) ratelimit = min(ratelimit, 32 >> (PAGE_SHIFT - 10)); preempt_disable(); @@ -1617,10 +1866,60 @@ void balance_dirty_pages_ratelimited(struct address_space *mapping) preempt_enable(); if (unlikely(current->nr_dirtied >= ratelimit)) - balance_dirty_pages(mapping, current->nr_dirtied); + balance_dirty_pages(mapping, wb, current->nr_dirtied); + + wb_put(wb); } EXPORT_SYMBOL(balance_dirty_pages_ratelimited); +/** + * wb_over_bg_thresh - does @wb need to be written back? + * @wb: bdi_writeback of interest + * + * Determines whether background writeback should keep writing @wb or it's + * clean enough. Returns %true if writeback should continue. + */ +bool wb_over_bg_thresh(struct bdi_writeback *wb) +{ + struct dirty_throttle_control gdtc_stor = { GDTC_INIT(wb) }; + struct dirty_throttle_control mdtc_stor = { MDTC_INIT(wb, &gdtc_stor) }; + struct dirty_throttle_control * const gdtc = &gdtc_stor; + struct dirty_throttle_control * const mdtc = mdtc_valid(&mdtc_stor) ? + &mdtc_stor : NULL; + + /* + * Similar to balance_dirty_pages() but ignores pages being written + * as we're trying to decide whether to put more under writeback. + */ + gdtc->avail = global_dirtyable_memory(); + gdtc->dirty = global_page_state(NR_FILE_DIRTY) + + global_page_state(NR_UNSTABLE_NFS); + domain_dirty_limits(gdtc); + + if (gdtc->dirty > gdtc->bg_thresh) + return true; + + if (wb_stat(wb, WB_RECLAIMABLE) > __wb_calc_thresh(gdtc)) + return true; + + if (mdtc) { + unsigned long filepages, headroom, writeback; + + mem_cgroup_wb_stats(wb, &filepages, &headroom, &mdtc->dirty, + &writeback); + mdtc_calc_avail(mdtc, filepages, headroom); + domain_dirty_limits(mdtc); /* ditto, ignore writeback */ + + if (mdtc->dirty > mdtc->bg_thresh) + return true; + + if (wb_stat(wb, WB_RECLAIMABLE) > __wb_calc_thresh(mdtc)) + return true; + } + + return false; +} + void throttle_vm_writeout(gfp_t gfp_mask) { unsigned long background_thresh; @@ -1628,7 +1927,7 @@ void throttle_vm_writeout(gfp_t gfp_mask) for ( ; ; ) { global_dirty_limits(&background_thresh, &dirty_thresh); - dirty_thresh = hard_dirty_limit(dirty_thresh); + dirty_thresh = hard_dirty_limit(&global_wb_domain, dirty_thresh); /* * Boost the allowable dirty threshold a bit for page @@ -1667,14 +1966,21 @@ void laptop_mode_timer_fn(unsigned long data) struct request_queue *q = (struct request_queue *)data; int nr_pages = global_page_state(NR_FILE_DIRTY) + global_page_state(NR_UNSTABLE_NFS); + struct bdi_writeback *wb; /* * We want to write everything out, not just down to the dirty * threshold */ - if (bdi_has_dirty_io(&q->backing_dev_info)) - bdi_start_writeback(&q->backing_dev_info, nr_pages, - WB_REASON_LAPTOP_TIMER); + if (!bdi_has_dirty_io(&q->backing_dev_info)) + return; + + rcu_read_lock(); + list_for_each_entry_rcu(wb, &q->backing_dev_info.wb_list, bdi_node) + if (wb_has_dirty_io(wb)) + wb_start_writeback(wb, nr_pages, true, + WB_REASON_LAPTOP_TIMER); + rcu_read_unlock(); } /* @@ -1718,10 +2024,12 @@ void laptop_sync_completion(void) void writeback_set_ratelimit(void) { + struct wb_domain *dom = &global_wb_domain; unsigned long background_thresh; unsigned long dirty_thresh; + global_dirty_limits(&background_thresh, &dirty_thresh); - global_dirty_limit = dirty_thresh; + dom->dirty_limit = dirty_thresh; ratelimit_pages = dirty_thresh / (num_online_cpus() * 32); if (ratelimit_pages < 16) ratelimit_pages = 16; @@ -1767,10 +2075,10 @@ static struct notifier_block ratelimit_nb = { */ void __init page_writeback_init(void) { + BUG_ON(wb_domain_init(&global_wb_domain, GFP_KERNEL)); + writeback_set_ratelimit(); register_cpu_notifier(&ratelimit_nb); - - fprop_global_init(&writeout_completions, GFP_KERNEL); } /** @@ -2090,19 +2398,29 @@ int __set_page_dirty_no_writeback(struct page *page) /* * Helper function for set_page_dirty family. + * + * Caller must hold mem_cgroup_begin_page_stat(). + * * NOTE: This relies on being atomic wrt interrupts. */ -void account_page_dirtied(struct page *page, struct address_space *mapping) +void account_page_dirtied(struct page *page, struct address_space *mapping, + struct mem_cgroup *memcg) { + struct inode *inode = mapping->host; + trace_writeback_dirty_page(page, mapping); if (mapping_cap_account_dirty(mapping)) { - struct backing_dev_info *bdi = inode_to_bdi(mapping->host); + struct bdi_writeback *wb; + + inode_attach_wb(inode, page); + wb = inode_to_wb(inode); + mem_cgroup_inc_page_stat(memcg, MEM_CGROUP_STAT_DIRTY); __inc_zone_page_state(page, NR_FILE_DIRTY); __inc_zone_page_state(page, NR_DIRTIED); - __inc_bdi_stat(bdi, BDI_RECLAIMABLE); - __inc_bdi_stat(bdi, BDI_DIRTIED); + __inc_wb_stat(wb, WB_RECLAIMABLE); + __inc_wb_stat(wb, WB_DIRTIED); task_io_account_write(PAGE_CACHE_SIZE); current->nr_dirtied++; this_cpu_inc(bdp_ratelimits); @@ -2113,21 +2431,18 @@ EXPORT_SYMBOL(account_page_dirtied); /* * Helper function for deaccounting dirty page without writeback. * - * Doing this should *normally* only ever be done when a page - * is truncated, and is not actually mapped anywhere at all. However, - * fs/buffer.c does this when it notices that somebody has cleaned - * out all the buffers on a page without actually doing it through - * the VM. Can you say "ext3 is horribly ugly"? Thought you could. + * Caller must hold mem_cgroup_begin_page_stat(). */ -void account_page_cleaned(struct page *page, struct address_space *mapping) +void account_page_cleaned(struct page *page, struct address_space *mapping, + struct mem_cgroup *memcg, struct bdi_writeback *wb) { if (mapping_cap_account_dirty(mapping)) { + mem_cgroup_dec_page_stat(memcg, MEM_CGROUP_STAT_DIRTY); dec_zone_page_state(page, NR_FILE_DIRTY); - dec_bdi_stat(inode_to_bdi(mapping->host), BDI_RECLAIMABLE); + dec_wb_stat(wb, WB_RECLAIMABLE); task_io_account_cancelled_write(PAGE_CACHE_SIZE); } } -EXPORT_SYMBOL(account_page_cleaned); /* * For address_spaces which do not use buffers. Just tag the page as dirty in @@ -2143,26 +2458,34 @@ EXPORT_SYMBOL(account_page_cleaned); */ int __set_page_dirty_nobuffers(struct page *page) { + struct mem_cgroup *memcg; + + memcg = mem_cgroup_begin_page_stat(page); if (!TestSetPageDirty(page)) { struct address_space *mapping = page_mapping(page); unsigned long flags; - if (!mapping) + if (!mapping) { + mem_cgroup_end_page_stat(memcg); return 1; + } spin_lock_irqsave(&mapping->tree_lock, flags); BUG_ON(page_mapping(page) != mapping); WARN_ON_ONCE(!PagePrivate(page) && !PageUptodate(page)); - account_page_dirtied(page, mapping); + account_page_dirtied(page, mapping, memcg); radix_tree_tag_set(&mapping->page_tree, page_index(page), PAGECACHE_TAG_DIRTY); spin_unlock_irqrestore(&mapping->tree_lock, flags); + mem_cgroup_end_page_stat(memcg); + if (mapping->host) { /* !PageAnon && !swapper_space */ __mark_inode_dirty(mapping->host, I_DIRTY_PAGES); } return 1; } + mem_cgroup_end_page_stat(memcg); return 0; } EXPORT_SYMBOL(__set_page_dirty_nobuffers); @@ -2177,10 +2500,17 @@ EXPORT_SYMBOL(__set_page_dirty_nobuffers); void account_page_redirty(struct page *page) { struct address_space *mapping = page->mapping; + if (mapping && mapping_cap_account_dirty(mapping)) { + struct inode *inode = mapping->host; + struct bdi_writeback *wb; + bool locked; + + wb = unlocked_inode_to_wb_begin(inode, &locked); current->nr_dirtied--; dec_zone_page_state(page, NR_DIRTIED); - dec_bdi_stat(inode_to_bdi(mapping->host), BDI_DIRTIED); + dec_wb_stat(wb, WB_DIRTIED); + unlocked_inode_to_wb_end(inode, locked); } } EXPORT_SYMBOL(account_page_redirty); @@ -2266,6 +2596,43 @@ int set_page_dirty_lock(struct page *page) EXPORT_SYMBOL(set_page_dirty_lock); /* + * This cancels just the dirty bit on the kernel page itself, it does NOT + * actually remove dirty bits on any mmap's that may be around. It also + * leaves the page tagged dirty, so any sync activity will still find it on + * the dirty lists, and in particular, clear_page_dirty_for_io() will still + * look at the dirty bits in the VM. + * + * Doing this should *normally* only ever be done when a page is truncated, + * and is not actually mapped anywhere at all. However, fs/buffer.c does + * this when it notices that somebody has cleaned out all the buffers on a + * page without actually doing it through the VM. Can you say "ext3 is + * horribly ugly"? Thought you could. + */ +void cancel_dirty_page(struct page *page) +{ + struct address_space *mapping = page_mapping(page); + + if (mapping_cap_account_dirty(mapping)) { + struct inode *inode = mapping->host; + struct bdi_writeback *wb; + struct mem_cgroup *memcg; + bool locked; + + memcg = mem_cgroup_begin_page_stat(page); + wb = unlocked_inode_to_wb_begin(inode, &locked); + + if (TestClearPageDirty(page)) + account_page_cleaned(page, mapping, memcg, wb); + + unlocked_inode_to_wb_end(inode, locked); + mem_cgroup_end_page_stat(memcg); + } else { + ClearPageDirty(page); + } +} +EXPORT_SYMBOL(cancel_dirty_page); + +/* * Clear a page's dirty flag, while caring for dirty memory accounting. * Returns true if the page was previously dirty. * @@ -2282,10 +2649,16 @@ EXPORT_SYMBOL(set_page_dirty_lock); int clear_page_dirty_for_io(struct page *page) { struct address_space *mapping = page_mapping(page); + int ret = 0; BUG_ON(!PageLocked(page)); if (mapping && mapping_cap_account_dirty(mapping)) { + struct inode *inode = mapping->host; + struct bdi_writeback *wb; + struct mem_cgroup *memcg; + bool locked; + /* * Yes, Virginia, this is indeed insane. * @@ -2321,13 +2694,17 @@ int clear_page_dirty_for_io(struct page *page) * always locked coming in here, so we get the desired * exclusion. */ + memcg = mem_cgroup_begin_page_stat(page); + wb = unlocked_inode_to_wb_begin(inode, &locked); if (TestClearPageDirty(page)) { + mem_cgroup_dec_page_stat(memcg, MEM_CGROUP_STAT_DIRTY); dec_zone_page_state(page, NR_FILE_DIRTY); - dec_bdi_stat(inode_to_bdi(mapping->host), - BDI_RECLAIMABLE); - return 1; + dec_wb_stat(wb, WB_RECLAIMABLE); + ret = 1; } - return 0; + unlocked_inode_to_wb_end(inode, locked); + mem_cgroup_end_page_stat(memcg); + return ret; } return TestClearPageDirty(page); } @@ -2341,7 +2718,8 @@ int test_clear_page_writeback(struct page *page) memcg = mem_cgroup_begin_page_stat(page); if (mapping) { - struct backing_dev_info *bdi = inode_to_bdi(mapping->host); + struct inode *inode = mapping->host; + struct backing_dev_info *bdi = inode_to_bdi(inode); unsigned long flags; spin_lock_irqsave(&mapping->tree_lock, flags); @@ -2351,8 +2729,10 @@ int test_clear_page_writeback(struct page *page) page_index(page), PAGECACHE_TAG_WRITEBACK); if (bdi_cap_account_writeback(bdi)) { - __dec_bdi_stat(bdi, BDI_WRITEBACK); - __bdi_writeout_inc(bdi); + struct bdi_writeback *wb = inode_to_wb(inode); + + __dec_wb_stat(wb, WB_WRITEBACK); + __wb_writeout_inc(wb); } } spin_unlock_irqrestore(&mapping->tree_lock, flags); @@ -2376,7 +2756,8 @@ int __test_set_page_writeback(struct page *page, bool keep_write) memcg = mem_cgroup_begin_page_stat(page); if (mapping) { - struct backing_dev_info *bdi = inode_to_bdi(mapping->host); + struct inode *inode = mapping->host; + struct backing_dev_info *bdi = inode_to_bdi(inode); unsigned long flags; spin_lock_irqsave(&mapping->tree_lock, flags); @@ -2386,7 +2767,7 @@ int __test_set_page_writeback(struct page *page, bool keep_write) page_index(page), PAGECACHE_TAG_WRITEBACK); if (bdi_cap_account_writeback(bdi)) - __inc_bdi_stat(bdi, BDI_WRITEBACK); + __inc_wb_stat(inode_to_wb(inode), WB_WRITEBACK); } if (!PageDirty(page)) radix_tree_tag_clear(&mapping->page_tree, |