summaryrefslogtreecommitdiffstats
path: root/kernel/include/uapi/linux/ethtool.h
diff options
context:
space:
mode:
authorYunhong Jiang <yunhong.jiang@intel.com>2015-08-04 12:17:53 -0700
committerYunhong Jiang <yunhong.jiang@intel.com>2015-08-04 15:44:42 -0700
commit9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 (patch)
tree1c9cafbcd35f783a87880a10f85d1a060db1a563 /kernel/include/uapi/linux/ethtool.h
parent98260f3884f4a202f9ca5eabed40b1354c489b29 (diff)
Add the rt linux 4.1.3-rt3 as base
Import the rt linux 4.1.3-rt3 as OPNFV kvm base. It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and the base is: commit 0917f823c59692d751951bf5ea699a2d1e2f26a2 Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Date: Sat Jul 25 12:13:34 2015 +0200 Prepare v4.1.3-rt3 Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> We lose all the git history this way and it's not good. We should apply another opnfv project repo in future. Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423 Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>
Diffstat (limited to 'kernel/include/uapi/linux/ethtool.h')
-rw-r--r--kernel/include/uapi/linux/ethtool.h1401
1 files changed, 1401 insertions, 0 deletions
diff --git a/kernel/include/uapi/linux/ethtool.h b/kernel/include/uapi/linux/ethtool.h
new file mode 100644
index 000000000..2e49fc880
--- /dev/null
+++ b/kernel/include/uapi/linux/ethtool.h
@@ -0,0 +1,1401 @@
+/*
+ * ethtool.h: Defines for Linux ethtool.
+ *
+ * Copyright (C) 1998 David S. Miller (davem@redhat.com)
+ * Copyright 2001 Jeff Garzik <jgarzik@pobox.com>
+ * Portions Copyright 2001 Sun Microsystems (thockin@sun.com)
+ * Portions Copyright 2002 Intel (eli.kupermann@intel.com,
+ * christopher.leech@intel.com,
+ * scott.feldman@intel.com)
+ * Portions Copyright (C) Sun Microsystems 2008
+ */
+
+#ifndef _UAPI_LINUX_ETHTOOL_H
+#define _UAPI_LINUX_ETHTOOL_H
+
+#include <linux/types.h>
+#include <linux/if_ether.h>
+
+/* All structures exposed to userland should be defined such that they
+ * have the same layout for 32-bit and 64-bit userland.
+ */
+
+/**
+ * struct ethtool_cmd - link control and status
+ * @cmd: Command number = %ETHTOOL_GSET or %ETHTOOL_SSET
+ * @supported: Bitmask of %SUPPORTED_* flags for the link modes,
+ * physical connectors and other link features for which the
+ * interface supports autonegotiation or auto-detection.
+ * Read-only.
+ * @advertising: Bitmask of %ADVERTISED_* flags for the link modes,
+ * physical connectors and other link features that are
+ * advertised through autonegotiation or enabled for
+ * auto-detection.
+ * @speed: Low bits of the speed
+ * @duplex: Duplex mode; one of %DUPLEX_*
+ * @port: Physical connector type; one of %PORT_*
+ * @phy_address: MDIO address of PHY (transceiver); 0 or 255 if not
+ * applicable. For clause 45 PHYs this is the PRTAD.
+ * @transceiver: Historically used to distinguish different possible
+ * PHY types, but not in a consistent way. Deprecated.
+ * @autoneg: Enable/disable autonegotiation and auto-detection;
+ * either %AUTONEG_DISABLE or %AUTONEG_ENABLE
+ * @mdio_support: Bitmask of %ETH_MDIO_SUPPORTS_* flags for the MDIO
+ * protocols supported by the interface; 0 if unknown.
+ * Read-only.
+ * @maxtxpkt: Historically used to report TX IRQ coalescing; now
+ * obsoleted by &struct ethtool_coalesce. Read-only; deprecated.
+ * @maxrxpkt: Historically used to report RX IRQ coalescing; now
+ * obsoleted by &struct ethtool_coalesce. Read-only; deprecated.
+ * @speed_hi: High bits of the speed
+ * @eth_tp_mdix: Ethernet twisted-pair MDI(-X) status; one of
+ * %ETH_TP_MDI_*. If the status is unknown or not applicable, the
+ * value will be %ETH_TP_MDI_INVALID. Read-only.
+ * @eth_tp_mdix_ctrl: Ethernet twisted pair MDI(-X) control; one of
+ * %ETH_TP_MDI_*. If MDI(-X) control is not implemented, reads
+ * yield %ETH_TP_MDI_INVALID and writes may be ignored or rejected.
+ * When written successfully, the link should be renegotiated if
+ * necessary.
+ * @lp_advertising: Bitmask of %ADVERTISED_* flags for the link modes
+ * and other link features that the link partner advertised
+ * through autonegotiation; 0 if unknown or not applicable.
+ * Read-only.
+ *
+ * The link speed in Mbps is split between @speed and @speed_hi. Use
+ * the ethtool_cmd_speed() and ethtool_cmd_speed_set() functions to
+ * access it.
+ *
+ * If autonegotiation is disabled, the speed and @duplex represent the
+ * fixed link mode and are writable if the driver supports multiple
+ * link modes. If it is enabled then they are read-only; if the link
+ * is up they represent the negotiated link mode; if the link is down,
+ * the speed is 0, %SPEED_UNKNOWN or the highest enabled speed and
+ * @duplex is %DUPLEX_UNKNOWN or the best enabled duplex mode.
+ *
+ * Some hardware interfaces may have multiple PHYs and/or physical
+ * connectors fitted or do not allow the driver to detect which are
+ * fitted. For these interfaces @port and/or @phy_address may be
+ * writable, possibly dependent on @autoneg being %AUTONEG_DISABLE.
+ * Otherwise, attempts to write different values may be ignored or
+ * rejected.
+ *
+ * Users should assume that all fields not marked read-only are
+ * writable and subject to validation by the driver. They should use
+ * %ETHTOOL_GSET to get the current values before making specific
+ * changes and then applying them with %ETHTOOL_SSET.
+ *
+ * Drivers that implement set_settings() should validate all fields
+ * other than @cmd that are not described as read-only or deprecated,
+ * and must ignore all fields described as read-only.
+ *
+ * Deprecated fields should be ignored by both users and drivers.
+ */
+struct ethtool_cmd {
+ __u32 cmd;
+ __u32 supported;
+ __u32 advertising;
+ __u16 speed;
+ __u8 duplex;
+ __u8 port;
+ __u8 phy_address;
+ __u8 transceiver;
+ __u8 autoneg;
+ __u8 mdio_support;
+ __u32 maxtxpkt;
+ __u32 maxrxpkt;
+ __u16 speed_hi;
+ __u8 eth_tp_mdix;
+ __u8 eth_tp_mdix_ctrl;
+ __u32 lp_advertising;
+ __u32 reserved[2];
+};
+
+static inline void ethtool_cmd_speed_set(struct ethtool_cmd *ep,
+ __u32 speed)
+{
+
+ ep->speed = (__u16)speed;
+ ep->speed_hi = (__u16)(speed >> 16);
+}
+
+static inline __u32 ethtool_cmd_speed(const struct ethtool_cmd *ep)
+{
+ return (ep->speed_hi << 16) | ep->speed;
+}
+
+/* Device supports clause 22 register access to PHY or peripherals
+ * using the interface defined in <linux/mii.h>. This should not be
+ * set if there are known to be no such peripherals present or if
+ * the driver only emulates clause 22 registers for compatibility.
+ */
+#define ETH_MDIO_SUPPORTS_C22 1
+
+/* Device supports clause 45 register access to PHY or peripherals
+ * using the interface defined in <linux/mii.h> and <linux/mdio.h>.
+ * This should not be set if there are known to be no such peripherals
+ * present.
+ */
+#define ETH_MDIO_SUPPORTS_C45 2
+
+#define ETHTOOL_FWVERS_LEN 32
+#define ETHTOOL_BUSINFO_LEN 32
+#define ETHTOOL_EROMVERS_LEN 32
+
+/**
+ * struct ethtool_drvinfo - general driver and device information
+ * @cmd: Command number = %ETHTOOL_GDRVINFO
+ * @driver: Driver short name. This should normally match the name
+ * in its bus driver structure (e.g. pci_driver::name). Must
+ * not be an empty string.
+ * @version: Driver version string; may be an empty string
+ * @fw_version: Firmware version string; may be an empty string
+ * @erom_version: Expansion ROM version string; may be an empty string
+ * @bus_info: Device bus address. This should match the dev_name()
+ * string for the underlying bus device, if there is one. May be
+ * an empty string.
+ * @n_priv_flags: Number of flags valid for %ETHTOOL_GPFLAGS and
+ * %ETHTOOL_SPFLAGS commands; also the number of strings in the
+ * %ETH_SS_PRIV_FLAGS set
+ * @n_stats: Number of u64 statistics returned by the %ETHTOOL_GSTATS
+ * command; also the number of strings in the %ETH_SS_STATS set
+ * @testinfo_len: Number of results returned by the %ETHTOOL_TEST
+ * command; also the number of strings in the %ETH_SS_TEST set
+ * @eedump_len: Size of EEPROM accessible through the %ETHTOOL_GEEPROM
+ * and %ETHTOOL_SEEPROM commands, in bytes
+ * @regdump_len: Size of register dump returned by the %ETHTOOL_GREGS
+ * command, in bytes
+ *
+ * Users can use the %ETHTOOL_GSSET_INFO command to get the number of
+ * strings in any string set (from Linux 2.6.34).
+ *
+ * Drivers should set at most @driver, @version, @fw_version and
+ * @bus_info in their get_drvinfo() implementation. The ethtool
+ * core fills in the other fields using other driver operations.
+ */
+struct ethtool_drvinfo {
+ __u32 cmd;
+ char driver[32];
+ char version[32];
+ char fw_version[ETHTOOL_FWVERS_LEN];
+ char bus_info[ETHTOOL_BUSINFO_LEN];
+ char erom_version[ETHTOOL_EROMVERS_LEN];
+ char reserved2[12];
+ __u32 n_priv_flags;
+ __u32 n_stats;
+ __u32 testinfo_len;
+ __u32 eedump_len;
+ __u32 regdump_len;
+};
+
+#define SOPASS_MAX 6
+
+/**
+ * struct ethtool_wolinfo - Wake-On-Lan configuration
+ * @cmd: Command number = %ETHTOOL_GWOL or %ETHTOOL_SWOL
+ * @supported: Bitmask of %WAKE_* flags for supported Wake-On-Lan modes.
+ * Read-only.
+ * @wolopts: Bitmask of %WAKE_* flags for enabled Wake-On-Lan modes.
+ * @sopass: SecureOn(tm) password; meaningful only if %WAKE_MAGICSECURE
+ * is set in @wolopts.
+ */
+struct ethtool_wolinfo {
+ __u32 cmd;
+ __u32 supported;
+ __u32 wolopts;
+ __u8 sopass[SOPASS_MAX];
+};
+
+/* for passing single values */
+struct ethtool_value {
+ __u32 cmd;
+ __u32 data;
+};
+
+enum tunable_id {
+ ETHTOOL_ID_UNSPEC,
+ ETHTOOL_RX_COPYBREAK,
+ ETHTOOL_TX_COPYBREAK,
+};
+
+enum tunable_type_id {
+ ETHTOOL_TUNABLE_UNSPEC,
+ ETHTOOL_TUNABLE_U8,
+ ETHTOOL_TUNABLE_U16,
+ ETHTOOL_TUNABLE_U32,
+ ETHTOOL_TUNABLE_U64,
+ ETHTOOL_TUNABLE_STRING,
+ ETHTOOL_TUNABLE_S8,
+ ETHTOOL_TUNABLE_S16,
+ ETHTOOL_TUNABLE_S32,
+ ETHTOOL_TUNABLE_S64,
+};
+
+struct ethtool_tunable {
+ __u32 cmd;
+ __u32 id;
+ __u32 type_id;
+ __u32 len;
+ void *data[0];
+};
+
+/**
+ * struct ethtool_regs - hardware register dump
+ * @cmd: Command number = %ETHTOOL_GREGS
+ * @version: Dump format version. This is driver-specific and may
+ * distinguish different chips/revisions. Drivers must use new
+ * version numbers whenever the dump format changes in an
+ * incompatible way.
+ * @len: On entry, the real length of @data. On return, the number of
+ * bytes used.
+ * @data: Buffer for the register dump
+ *
+ * Users should use %ETHTOOL_GDRVINFO to find the maximum length of
+ * a register dump for the interface. They must allocate the buffer
+ * immediately following this structure.
+ */
+struct ethtool_regs {
+ __u32 cmd;
+ __u32 version;
+ __u32 len;
+ __u8 data[0];
+};
+
+/**
+ * struct ethtool_eeprom - EEPROM dump
+ * @cmd: Command number = %ETHTOOL_GEEPROM, %ETHTOOL_GMODULEEEPROM or
+ * %ETHTOOL_SEEPROM
+ * @magic: A 'magic cookie' value to guard against accidental changes.
+ * The value passed in to %ETHTOOL_SEEPROM must match the value
+ * returned by %ETHTOOL_GEEPROM for the same device. This is
+ * unused when @cmd is %ETHTOOL_GMODULEEEPROM.
+ * @offset: Offset within the EEPROM to begin reading/writing, in bytes
+ * @len: On entry, number of bytes to read/write. On successful
+ * return, number of bytes actually read/written. In case of
+ * error, this may indicate at what point the error occurred.
+ * @data: Buffer to read/write from
+ *
+ * Users may use %ETHTOOL_GDRVINFO or %ETHTOOL_GMODULEINFO to find
+ * the length of an on-board or module EEPROM, respectively. They
+ * must allocate the buffer immediately following this structure.
+ */
+struct ethtool_eeprom {
+ __u32 cmd;
+ __u32 magic;
+ __u32 offset;
+ __u32 len;
+ __u8 data[0];
+};
+
+/**
+ * struct ethtool_eee - Energy Efficient Ethernet information
+ * @cmd: ETHTOOL_{G,S}EEE
+ * @supported: Mask of %SUPPORTED_* flags for the speed/duplex combinations
+ * for which there is EEE support.
+ * @advertised: Mask of %ADVERTISED_* flags for the speed/duplex combinations
+ * advertised as eee capable.
+ * @lp_advertised: Mask of %ADVERTISED_* flags for the speed/duplex
+ * combinations advertised by the link partner as eee capable.
+ * @eee_active: Result of the eee auto negotiation.
+ * @eee_enabled: EEE configured mode (enabled/disabled).
+ * @tx_lpi_enabled: Whether the interface should assert its tx lpi, given
+ * that eee was negotiated.
+ * @tx_lpi_timer: Time in microseconds the interface delays prior to asserting
+ * its tx lpi (after reaching 'idle' state). Effective only when eee
+ * was negotiated and tx_lpi_enabled was set.
+ */
+struct ethtool_eee {
+ __u32 cmd;
+ __u32 supported;
+ __u32 advertised;
+ __u32 lp_advertised;
+ __u32 eee_active;
+ __u32 eee_enabled;
+ __u32 tx_lpi_enabled;
+ __u32 tx_lpi_timer;
+ __u32 reserved[2];
+};
+
+/**
+ * struct ethtool_modinfo - plugin module eeprom information
+ * @cmd: %ETHTOOL_GMODULEINFO
+ * @type: Standard the module information conforms to %ETH_MODULE_SFF_xxxx
+ * @eeprom_len: Length of the eeprom
+ *
+ * This structure is used to return the information to
+ * properly size memory for a subsequent call to %ETHTOOL_GMODULEEEPROM.
+ * The type code indicates the eeprom data format
+ */
+struct ethtool_modinfo {
+ __u32 cmd;
+ __u32 type;
+ __u32 eeprom_len;
+ __u32 reserved[8];
+};
+
+/**
+ * struct ethtool_coalesce - coalescing parameters for IRQs and stats updates
+ * @cmd: ETHTOOL_{G,S}COALESCE
+ * @rx_coalesce_usecs: How many usecs to delay an RX interrupt after
+ * a packet arrives.
+ * @rx_max_coalesced_frames: Maximum number of packets to receive
+ * before an RX interrupt.
+ * @rx_coalesce_usecs_irq: Same as @rx_coalesce_usecs, except that
+ * this value applies while an IRQ is being serviced by the host.
+ * @rx_max_coalesced_frames_irq: Same as @rx_max_coalesced_frames,
+ * except that this value applies while an IRQ is being serviced
+ * by the host.
+ * @tx_coalesce_usecs: How many usecs to delay a TX interrupt after
+ * a packet is sent.
+ * @tx_max_coalesced_frames: Maximum number of packets to be sent
+ * before a TX interrupt.
+ * @tx_coalesce_usecs_irq: Same as @tx_coalesce_usecs, except that
+ * this value applies while an IRQ is being serviced by the host.
+ * @tx_max_coalesced_frames_irq: Same as @tx_max_coalesced_frames,
+ * except that this value applies while an IRQ is being serviced
+ * by the host.
+ * @stats_block_coalesce_usecs: How many usecs to delay in-memory
+ * statistics block updates. Some drivers do not have an
+ * in-memory statistic block, and in such cases this value is
+ * ignored. This value must not be zero.
+ * @use_adaptive_rx_coalesce: Enable adaptive RX coalescing.
+ * @use_adaptive_tx_coalesce: Enable adaptive TX coalescing.
+ * @pkt_rate_low: Threshold for low packet rate (packets per second).
+ * @rx_coalesce_usecs_low: How many usecs to delay an RX interrupt after
+ * a packet arrives, when the packet rate is below @pkt_rate_low.
+ * @rx_max_coalesced_frames_low: Maximum number of packets to be received
+ * before an RX interrupt, when the packet rate is below @pkt_rate_low.
+ * @tx_coalesce_usecs_low: How many usecs to delay a TX interrupt after
+ * a packet is sent, when the packet rate is below @pkt_rate_low.
+ * @tx_max_coalesced_frames_low: Maximum nuumber of packets to be sent before
+ * a TX interrupt, when the packet rate is below @pkt_rate_low.
+ * @pkt_rate_high: Threshold for high packet rate (packets per second).
+ * @rx_coalesce_usecs_high: How many usecs to delay an RX interrupt after
+ * a packet arrives, when the packet rate is above @pkt_rate_high.
+ * @rx_max_coalesced_frames_high: Maximum number of packets to be received
+ * before an RX interrupt, when the packet rate is above @pkt_rate_high.
+ * @tx_coalesce_usecs_high: How many usecs to delay a TX interrupt after
+ * a packet is sent, when the packet rate is above @pkt_rate_high.
+ * @tx_max_coalesced_frames_high: Maximum number of packets to be sent before
+ * a TX interrupt, when the packet rate is above @pkt_rate_high.
+ * @rate_sample_interval: How often to do adaptive coalescing packet rate
+ * sampling, measured in seconds. Must not be zero.
+ *
+ * Each pair of (usecs, max_frames) fields specifies that interrupts
+ * should be coalesced until
+ * (usecs > 0 && time_since_first_completion >= usecs) ||
+ * (max_frames > 0 && completed_frames >= max_frames)
+ *
+ * It is illegal to set both usecs and max_frames to zero as this
+ * would cause interrupts to never be generated. To disable
+ * coalescing, set usecs = 0 and max_frames = 1.
+ *
+ * Some implementations ignore the value of max_frames and use the
+ * condition time_since_first_completion >= usecs
+ *
+ * This is deprecated. Drivers for hardware that does not support
+ * counting completions should validate that max_frames == !rx_usecs.
+ *
+ * Adaptive RX/TX coalescing is an algorithm implemented by some
+ * drivers to improve latency under low packet rates and improve
+ * throughput under high packet rates. Some drivers only implement
+ * one of RX or TX adaptive coalescing. Anything not implemented by
+ * the driver causes these values to be silently ignored.
+ *
+ * When the packet rate is below @pkt_rate_high but above
+ * @pkt_rate_low (both measured in packets per second) the
+ * normal {rx,tx}_* coalescing parameters are used.
+ */
+struct ethtool_coalesce {
+ __u32 cmd;
+ __u32 rx_coalesce_usecs;
+ __u32 rx_max_coalesced_frames;
+ __u32 rx_coalesce_usecs_irq;
+ __u32 rx_max_coalesced_frames_irq;
+ __u32 tx_coalesce_usecs;
+ __u32 tx_max_coalesced_frames;
+ __u32 tx_coalesce_usecs_irq;
+ __u32 tx_max_coalesced_frames_irq;
+ __u32 stats_block_coalesce_usecs;
+ __u32 use_adaptive_rx_coalesce;
+ __u32 use_adaptive_tx_coalesce;
+ __u32 pkt_rate_low;
+ __u32 rx_coalesce_usecs_low;
+ __u32 rx_max_coalesced_frames_low;
+ __u32 tx_coalesce_usecs_low;
+ __u32 tx_max_coalesced_frames_low;
+ __u32 pkt_rate_high;
+ __u32 rx_coalesce_usecs_high;
+ __u32 rx_max_coalesced_frames_high;
+ __u32 tx_coalesce_usecs_high;
+ __u32 tx_max_coalesced_frames_high;
+ __u32 rate_sample_interval;
+};
+
+/**
+ * struct ethtool_ringparam - RX/TX ring parameters
+ * @cmd: Command number = %ETHTOOL_GRINGPARAM or %ETHTOOL_SRINGPARAM
+ * @rx_max_pending: Maximum supported number of pending entries per
+ * RX ring. Read-only.
+ * @rx_mini_max_pending: Maximum supported number of pending entries
+ * per RX mini ring. Read-only.
+ * @rx_jumbo_max_pending: Maximum supported number of pending entries
+ * per RX jumbo ring. Read-only.
+ * @tx_max_pending: Maximum supported number of pending entries per
+ * TX ring. Read-only.
+ * @rx_pending: Current maximum number of pending entries per RX ring
+ * @rx_mini_pending: Current maximum number of pending entries per RX
+ * mini ring
+ * @rx_jumbo_pending: Current maximum number of pending entries per RX
+ * jumbo ring
+ * @tx_pending: Current maximum supported number of pending entries
+ * per TX ring
+ *
+ * If the interface does not have separate RX mini and/or jumbo rings,
+ * @rx_mini_max_pending and/or @rx_jumbo_max_pending will be 0.
+ *
+ * There may also be driver-dependent minimum values for the number
+ * of entries per ring.
+ */
+struct ethtool_ringparam {
+ __u32 cmd;
+ __u32 rx_max_pending;
+ __u32 rx_mini_max_pending;
+ __u32 rx_jumbo_max_pending;
+ __u32 tx_max_pending;
+ __u32 rx_pending;
+ __u32 rx_mini_pending;
+ __u32 rx_jumbo_pending;
+ __u32 tx_pending;
+};
+
+/**
+ * struct ethtool_channels - configuring number of network channel
+ * @cmd: ETHTOOL_{G,S}CHANNELS
+ * @max_rx: Read only. Maximum number of receive channel the driver support.
+ * @max_tx: Read only. Maximum number of transmit channel the driver support.
+ * @max_other: Read only. Maximum number of other channel the driver support.
+ * @max_combined: Read only. Maximum number of combined channel the driver
+ * support. Set of queues RX, TX or other.
+ * @rx_count: Valid values are in the range 1 to the max_rx.
+ * @tx_count: Valid values are in the range 1 to the max_tx.
+ * @other_count: Valid values are in the range 1 to the max_other.
+ * @combined_count: Valid values are in the range 1 to the max_combined.
+ *
+ * This can be used to configure RX, TX and other channels.
+ */
+
+struct ethtool_channels {
+ __u32 cmd;
+ __u32 max_rx;
+ __u32 max_tx;
+ __u32 max_other;
+ __u32 max_combined;
+ __u32 rx_count;
+ __u32 tx_count;
+ __u32 other_count;
+ __u32 combined_count;
+};
+
+/**
+ * struct ethtool_pauseparam - Ethernet pause (flow control) parameters
+ * @cmd: Command number = %ETHTOOL_GPAUSEPARAM or %ETHTOOL_SPAUSEPARAM
+ * @autoneg: Flag to enable autonegotiation of pause frame use
+ * @rx_pause: Flag to enable reception of pause frames
+ * @tx_pause: Flag to enable transmission of pause frames
+ *
+ * Drivers should reject a non-zero setting of @autoneg when
+ * autoneogotiation is disabled (or not supported) for the link.
+ *
+ * If the link is autonegotiated, drivers should use
+ * mii_advertise_flowctrl() or similar code to set the advertised
+ * pause frame capabilities based on the @rx_pause and @tx_pause flags,
+ * even if @autoneg is zero. They should also allow the advertised
+ * pause frame capabilities to be controlled directly through the
+ * advertising field of &struct ethtool_cmd.
+ *
+ * If @autoneg is non-zero, the MAC is configured to send and/or
+ * receive pause frames according to the result of autonegotiation.
+ * Otherwise, it is configured directly based on the @rx_pause and
+ * @tx_pause flags.
+ */
+struct ethtool_pauseparam {
+ __u32 cmd;
+ __u32 autoneg;
+ __u32 rx_pause;
+ __u32 tx_pause;
+};
+
+#define ETH_GSTRING_LEN 32
+
+/**
+ * enum ethtool_stringset - string set ID
+ * @ETH_SS_TEST: Self-test result names, for use with %ETHTOOL_TEST
+ * @ETH_SS_STATS: Statistic names, for use with %ETHTOOL_GSTATS
+ * @ETH_SS_PRIV_FLAGS: Driver private flag names, for use with
+ * %ETHTOOL_GPFLAGS and %ETHTOOL_SPFLAGS
+ * @ETH_SS_NTUPLE_FILTERS: Previously used with %ETHTOOL_GRXNTUPLE;
+ * now deprecated
+ * @ETH_SS_FEATURES: Device feature names
+ * @ETH_SS_RSS_HASH_FUNCS: RSS hush function names
+ */
+enum ethtool_stringset {
+ ETH_SS_TEST = 0,
+ ETH_SS_STATS,
+ ETH_SS_PRIV_FLAGS,
+ ETH_SS_NTUPLE_FILTERS,
+ ETH_SS_FEATURES,
+ ETH_SS_RSS_HASH_FUNCS,
+};
+
+/**
+ * struct ethtool_gstrings - string set for data tagging
+ * @cmd: Command number = %ETHTOOL_GSTRINGS
+ * @string_set: String set ID; one of &enum ethtool_stringset
+ * @len: On return, the number of strings in the string set
+ * @data: Buffer for strings. Each string is null-padded to a size of
+ * %ETH_GSTRING_LEN.
+ *
+ * Users must use %ETHTOOL_GSSET_INFO to find the number of strings in
+ * the string set. They must allocate a buffer of the appropriate
+ * size immediately following this structure.
+ */
+struct ethtool_gstrings {
+ __u32 cmd;
+ __u32 string_set;
+ __u32 len;
+ __u8 data[0];
+};
+
+/**
+ * struct ethtool_sset_info - string set information
+ * @cmd: Command number = %ETHTOOL_GSSET_INFO
+ * @sset_mask: On entry, a bitmask of string sets to query, with bits
+ * numbered according to &enum ethtool_stringset. On return, a
+ * bitmask of those string sets queried that are supported.
+ * @data: Buffer for string set sizes. On return, this contains the
+ * size of each string set that was queried and supported, in
+ * order of ID.
+ *
+ * Example: The user passes in @sset_mask = 0x7 (sets 0, 1, 2) and on
+ * return @sset_mask == 0x6 (sets 1, 2). Then @data[0] contains the
+ * size of set 1 and @data[1] contains the size of set 2.
+ *
+ * Users must allocate a buffer of the appropriate size (4 * number of
+ * sets queried) immediately following this structure.
+ */
+struct ethtool_sset_info {
+ __u32 cmd;
+ __u32 reserved;
+ __u64 sset_mask;
+ __u32 data[0];
+};
+
+/**
+ * enum ethtool_test_flags - flags definition of ethtool_test
+ * @ETH_TEST_FL_OFFLINE: if set perform online and offline tests, otherwise
+ * only online tests.
+ * @ETH_TEST_FL_FAILED: Driver set this flag if test fails.
+ * @ETH_TEST_FL_EXTERNAL_LB: Application request to perform external loopback
+ * test.
+ * @ETH_TEST_FL_EXTERNAL_LB_DONE: Driver performed the external loopback test
+ */
+
+enum ethtool_test_flags {
+ ETH_TEST_FL_OFFLINE = (1 << 0),
+ ETH_TEST_FL_FAILED = (1 << 1),
+ ETH_TEST_FL_EXTERNAL_LB = (1 << 2),
+ ETH_TEST_FL_EXTERNAL_LB_DONE = (1 << 3),
+};
+
+/**
+ * struct ethtool_test - device self-test invocation
+ * @cmd: Command number = %ETHTOOL_TEST
+ * @flags: A bitmask of flags from &enum ethtool_test_flags. Some
+ * flags may be set by the user on entry; others may be set by
+ * the driver on return.
+ * @len: On return, the number of test results
+ * @data: Array of test results
+ *
+ * Users must use %ETHTOOL_GSSET_INFO or %ETHTOOL_GDRVINFO to find the
+ * number of test results that will be returned. They must allocate a
+ * buffer of the appropriate size (8 * number of results) immediately
+ * following this structure.
+ */
+struct ethtool_test {
+ __u32 cmd;
+ __u32 flags;
+ __u32 reserved;
+ __u32 len;
+ __u64 data[0];
+};
+
+/**
+ * struct ethtool_stats - device-specific statistics
+ * @cmd: Command number = %ETHTOOL_GSTATS
+ * @n_stats: On return, the number of statistics
+ * @data: Array of statistics
+ *
+ * Users must use %ETHTOOL_GSSET_INFO or %ETHTOOL_GDRVINFO to find the
+ * number of statistics that will be returned. They must allocate a
+ * buffer of the appropriate size (8 * number of statistics)
+ * immediately following this structure.
+ */
+struct ethtool_stats {
+ __u32 cmd;
+ __u32 n_stats;
+ __u64 data[0];
+};
+
+/**
+ * struct ethtool_perm_addr - permanent hardware address
+ * @cmd: Command number = %ETHTOOL_GPERMADDR
+ * @size: On entry, the size of the buffer. On return, the size of the
+ * address. The command fails if the buffer is too small.
+ * @data: Buffer for the address
+ *
+ * Users must allocate the buffer immediately following this structure.
+ * A buffer size of %MAX_ADDR_LEN should be sufficient for any address
+ * type.
+ */
+struct ethtool_perm_addr {
+ __u32 cmd;
+ __u32 size;
+ __u8 data[0];
+};
+
+/* boolean flags controlling per-interface behavior characteristics.
+ * When reading, the flag indicates whether or not a certain behavior
+ * is enabled/present. When writing, the flag indicates whether
+ * or not the driver should turn on (set) or off (clear) a behavior.
+ *
+ * Some behaviors may read-only (unconditionally absent or present).
+ * If such is the case, return EINVAL in the set-flags operation if the
+ * flag differs from the read-only value.
+ */
+enum ethtool_flags {
+ ETH_FLAG_TXVLAN = (1 << 7), /* TX VLAN offload enabled */
+ ETH_FLAG_RXVLAN = (1 << 8), /* RX VLAN offload enabled */
+ ETH_FLAG_LRO = (1 << 15), /* LRO is enabled */
+ ETH_FLAG_NTUPLE = (1 << 27), /* N-tuple filters enabled */
+ ETH_FLAG_RXHASH = (1 << 28),
+};
+
+/* The following structures are for supporting RX network flow
+ * classification and RX n-tuple configuration. Note, all multibyte
+ * fields, e.g., ip4src, ip4dst, psrc, pdst, spi, etc. are expected to
+ * be in network byte order.
+ */
+
+/**
+ * struct ethtool_tcpip4_spec - flow specification for TCP/IPv4 etc.
+ * @ip4src: Source host
+ * @ip4dst: Destination host
+ * @psrc: Source port
+ * @pdst: Destination port
+ * @tos: Type-of-service
+ *
+ * This can be used to specify a TCP/IPv4, UDP/IPv4 or SCTP/IPv4 flow.
+ */
+struct ethtool_tcpip4_spec {
+ __be32 ip4src;
+ __be32 ip4dst;
+ __be16 psrc;
+ __be16 pdst;
+ __u8 tos;
+};
+
+/**
+ * struct ethtool_ah_espip4_spec - flow specification for IPsec/IPv4
+ * @ip4src: Source host
+ * @ip4dst: Destination host
+ * @spi: Security parameters index
+ * @tos: Type-of-service
+ *
+ * This can be used to specify an IPsec transport or tunnel over IPv4.
+ */
+struct ethtool_ah_espip4_spec {
+ __be32 ip4src;
+ __be32 ip4dst;
+ __be32 spi;
+ __u8 tos;
+};
+
+#define ETH_RX_NFC_IP4 1
+
+/**
+ * struct ethtool_usrip4_spec - general flow specification for IPv4
+ * @ip4src: Source host
+ * @ip4dst: Destination host
+ * @l4_4_bytes: First 4 bytes of transport (layer 4) header
+ * @tos: Type-of-service
+ * @ip_ver: Value must be %ETH_RX_NFC_IP4; mask must be 0
+ * @proto: Transport protocol number; mask must be 0
+ */
+struct ethtool_usrip4_spec {
+ __be32 ip4src;
+ __be32 ip4dst;
+ __be32 l4_4_bytes;
+ __u8 tos;
+ __u8 ip_ver;
+ __u8 proto;
+};
+
+union ethtool_flow_union {
+ struct ethtool_tcpip4_spec tcp_ip4_spec;
+ struct ethtool_tcpip4_spec udp_ip4_spec;
+ struct ethtool_tcpip4_spec sctp_ip4_spec;
+ struct ethtool_ah_espip4_spec ah_ip4_spec;
+ struct ethtool_ah_espip4_spec esp_ip4_spec;
+ struct ethtool_usrip4_spec usr_ip4_spec;
+ struct ethhdr ether_spec;
+ __u8 hdata[52];
+};
+
+/**
+ * struct ethtool_flow_ext - additional RX flow fields
+ * @h_dest: destination MAC address
+ * @vlan_etype: VLAN EtherType
+ * @vlan_tci: VLAN tag control information
+ * @data: user defined data
+ *
+ * Note, @vlan_etype, @vlan_tci, and @data are only valid if %FLOW_EXT
+ * is set in &struct ethtool_rx_flow_spec @flow_type.
+ * @h_dest is valid if %FLOW_MAC_EXT is set.
+ */
+struct ethtool_flow_ext {
+ __u8 padding[2];
+ unsigned char h_dest[ETH_ALEN];
+ __be16 vlan_etype;
+ __be16 vlan_tci;
+ __be32 data[2];
+};
+
+/**
+ * struct ethtool_rx_flow_spec - classification rule for RX flows
+ * @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW
+ * @h_u: Flow fields to match (dependent on @flow_type)
+ * @h_ext: Additional fields to match
+ * @m_u: Masks for flow field bits to be matched
+ * @m_ext: Masks for additional field bits to be matched
+ * Note, all additional fields must be ignored unless @flow_type
+ * includes the %FLOW_EXT or %FLOW_MAC_EXT flag
+ * (see &struct ethtool_flow_ext description).
+ * @ring_cookie: RX ring/queue index to deliver to, or %RX_CLS_FLOW_DISC
+ * if packets should be discarded
+ * @location: Location of rule in the table. Locations must be
+ * numbered such that a flow matching multiple rules will be
+ * classified according to the first (lowest numbered) rule.
+ */
+struct ethtool_rx_flow_spec {
+ __u32 flow_type;
+ union ethtool_flow_union h_u;
+ struct ethtool_flow_ext h_ext;
+ union ethtool_flow_union m_u;
+ struct ethtool_flow_ext m_ext;
+ __u64 ring_cookie;
+ __u32 location;
+};
+
+/**
+ * struct ethtool_rxnfc - command to get or set RX flow classification rules
+ * @cmd: Specific command number - %ETHTOOL_GRXFH, %ETHTOOL_SRXFH,
+ * %ETHTOOL_GRXRINGS, %ETHTOOL_GRXCLSRLCNT, %ETHTOOL_GRXCLSRULE,
+ * %ETHTOOL_GRXCLSRLALL, %ETHTOOL_SRXCLSRLDEL or %ETHTOOL_SRXCLSRLINS
+ * @flow_type: Type of flow to be affected, e.g. %TCP_V4_FLOW
+ * @data: Command-dependent value
+ * @fs: Flow classification rule
+ * @rule_cnt: Number of rules to be affected
+ * @rule_locs: Array of used rule locations
+ *
+ * For %ETHTOOL_GRXFH and %ETHTOOL_SRXFH, @data is a bitmask indicating
+ * the fields included in the flow hash, e.g. %RXH_IP_SRC. The following
+ * structure fields must not be used.
+ *
+ * For %ETHTOOL_GRXRINGS, @data is set to the number of RX rings/queues
+ * on return.
+ *
+ * For %ETHTOOL_GRXCLSRLCNT, @rule_cnt is set to the number of defined
+ * rules on return. If @data is non-zero on return then it is the
+ * size of the rule table, plus the flag %RX_CLS_LOC_SPECIAL if the
+ * driver supports any special location values. If that flag is not
+ * set in @data then special location values should not be used.
+ *
+ * For %ETHTOOL_GRXCLSRULE, @fs.@location specifies the location of an
+ * existing rule on entry and @fs contains the rule on return.
+ *
+ * For %ETHTOOL_GRXCLSRLALL, @rule_cnt specifies the array size of the
+ * user buffer for @rule_locs on entry. On return, @data is the size
+ * of the rule table, @rule_cnt is the number of defined rules, and
+ * @rule_locs contains the locations of the defined rules. Drivers
+ * must use the second parameter to get_rxnfc() instead of @rule_locs.
+ *
+ * For %ETHTOOL_SRXCLSRLINS, @fs specifies the rule to add or update.
+ * @fs.@location either specifies the location to use or is a special
+ * location value with %RX_CLS_LOC_SPECIAL flag set. On return,
+ * @fs.@location is the actual rule location.
+ *
+ * For %ETHTOOL_SRXCLSRLDEL, @fs.@location specifies the location of an
+ * existing rule on entry.
+ *
+ * A driver supporting the special location values for
+ * %ETHTOOL_SRXCLSRLINS may add the rule at any suitable unused
+ * location, and may remove a rule at a later location (lower
+ * priority) that matches exactly the same set of flows. The special
+ * values are %RX_CLS_LOC_ANY, selecting any location;
+ * %RX_CLS_LOC_FIRST, selecting the first suitable location (maximum
+ * priority); and %RX_CLS_LOC_LAST, selecting the last suitable
+ * location (minimum priority). Additional special values may be
+ * defined in future and drivers must return -%EINVAL for any
+ * unrecognised value.
+ */
+struct ethtool_rxnfc {
+ __u32 cmd;
+ __u32 flow_type;
+ __u64 data;
+ struct ethtool_rx_flow_spec fs;
+ __u32 rule_cnt;
+ __u32 rule_locs[0];
+};
+
+
+/**
+ * struct ethtool_rxfh_indir - command to get or set RX flow hash indirection
+ * @cmd: Specific command number - %ETHTOOL_GRXFHINDIR or %ETHTOOL_SRXFHINDIR
+ * @size: On entry, the array size of the user buffer, which may be zero.
+ * On return from %ETHTOOL_GRXFHINDIR, the array size of the hardware
+ * indirection table.
+ * @ring_index: RX ring/queue index for each hash value
+ *
+ * For %ETHTOOL_GRXFHINDIR, a @size of zero means that only the size
+ * should be returned. For %ETHTOOL_SRXFHINDIR, a @size of zero means
+ * the table should be reset to default values. This last feature
+ * is not supported by the original implementations.
+ */
+struct ethtool_rxfh_indir {
+ __u32 cmd;
+ __u32 size;
+ __u32 ring_index[0];
+};
+
+/**
+ * struct ethtool_rxfh - command to get/set RX flow hash indir or/and hash key.
+ * @cmd: Specific command number - %ETHTOOL_GRSSH or %ETHTOOL_SRSSH
+ * @rss_context: RSS context identifier.
+ * @indir_size: On entry, the array size of the user buffer for the
+ * indirection table, which may be zero, or (for %ETHTOOL_SRSSH),
+ * %ETH_RXFH_INDIR_NO_CHANGE. On return from %ETHTOOL_GRSSH,
+ * the array size of the hardware indirection table.
+ * @key_size: On entry, the array size of the user buffer for the hash key,
+ * which may be zero. On return from %ETHTOOL_GRSSH, the size of the
+ * hardware hash key.
+ * @hfunc: Defines the current RSS hash function used by HW (or to be set to).
+ * Valid values are one of the %ETH_RSS_HASH_*.
+ * @rsvd: Reserved for future extensions.
+ * @rss_config: RX ring/queue index for each hash value i.e., indirection table
+ * of @indir_size __u32 elements, followed by hash key of @key_size
+ * bytes.
+ *
+ * For %ETHTOOL_GRSSH, a @indir_size and key_size of zero means that only the
+ * size should be returned. For %ETHTOOL_SRSSH, an @indir_size of
+ * %ETH_RXFH_INDIR_NO_CHANGE means that indir table setting is not requested
+ * and a @indir_size of zero means the indir table should be reset to default
+ * values. An hfunc of zero means that hash function setting is not requested.
+ */
+struct ethtool_rxfh {
+ __u32 cmd;
+ __u32 rss_context;
+ __u32 indir_size;
+ __u32 key_size;
+ __u8 hfunc;
+ __u8 rsvd8[3];
+ __u32 rsvd32;
+ __u32 rss_config[0];
+};
+#define ETH_RXFH_INDIR_NO_CHANGE 0xffffffff
+
+/**
+ * struct ethtool_rx_ntuple_flow_spec - specification for RX flow filter
+ * @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW
+ * @h_u: Flow field values to match (dependent on @flow_type)
+ * @m_u: Masks for flow field value bits to be ignored
+ * @vlan_tag: VLAN tag to match
+ * @vlan_tag_mask: Mask for VLAN tag bits to be ignored
+ * @data: Driver-dependent data to match
+ * @data_mask: Mask for driver-dependent data bits to be ignored
+ * @action: RX ring/queue index to deliver to (non-negative) or other action
+ * (negative, e.g. %ETHTOOL_RXNTUPLE_ACTION_DROP)
+ *
+ * For flow types %TCP_V4_FLOW, %UDP_V4_FLOW and %SCTP_V4_FLOW, where
+ * a field value and mask are both zero this is treated as if all mask
+ * bits are set i.e. the field is ignored.
+ */
+struct ethtool_rx_ntuple_flow_spec {
+ __u32 flow_type;
+ union {
+ struct ethtool_tcpip4_spec tcp_ip4_spec;
+ struct ethtool_tcpip4_spec udp_ip4_spec;
+ struct ethtool_tcpip4_spec sctp_ip4_spec;
+ struct ethtool_ah_espip4_spec ah_ip4_spec;
+ struct ethtool_ah_espip4_spec esp_ip4_spec;
+ struct ethtool_usrip4_spec usr_ip4_spec;
+ struct ethhdr ether_spec;
+ __u8 hdata[72];
+ } h_u, m_u;
+
+ __u16 vlan_tag;
+ __u16 vlan_tag_mask;
+ __u64 data;
+ __u64 data_mask;
+
+ __s32 action;
+#define ETHTOOL_RXNTUPLE_ACTION_DROP (-1) /* drop packet */
+#define ETHTOOL_RXNTUPLE_ACTION_CLEAR (-2) /* clear filter */
+};
+
+/**
+ * struct ethtool_rx_ntuple - command to set or clear RX flow filter
+ * @cmd: Command number - %ETHTOOL_SRXNTUPLE
+ * @fs: Flow filter specification
+ */
+struct ethtool_rx_ntuple {
+ __u32 cmd;
+ struct ethtool_rx_ntuple_flow_spec fs;
+};
+
+#define ETHTOOL_FLASH_MAX_FILENAME 128
+enum ethtool_flash_op_type {
+ ETHTOOL_FLASH_ALL_REGIONS = 0,
+};
+
+/* for passing firmware flashing related parameters */
+struct ethtool_flash {
+ __u32 cmd;
+ __u32 region;
+ char data[ETHTOOL_FLASH_MAX_FILENAME];
+};
+
+/**
+ * struct ethtool_dump - used for retrieving, setting device dump
+ * @cmd: Command number - %ETHTOOL_GET_DUMP_FLAG, %ETHTOOL_GET_DUMP_DATA, or
+ * %ETHTOOL_SET_DUMP
+ * @version: FW version of the dump, filled in by driver
+ * @flag: driver dependent flag for dump setting, filled in by driver during
+ * get and filled in by ethtool for set operation.
+ * flag must be initialized by macro ETH_FW_DUMP_DISABLE value when
+ * firmware dump is disabled.
+ * @len: length of dump data, used as the length of the user buffer on entry to
+ * %ETHTOOL_GET_DUMP_DATA and this is returned as dump length by driver
+ * for %ETHTOOL_GET_DUMP_FLAG command
+ * @data: data collected for get dump data operation
+ */
+struct ethtool_dump {
+ __u32 cmd;
+ __u32 version;
+ __u32 flag;
+ __u32 len;
+ __u8 data[0];
+};
+
+#define ETH_FW_DUMP_DISABLE 0
+
+/* for returning and changing feature sets */
+
+/**
+ * struct ethtool_get_features_block - block with state of 32 features
+ * @available: mask of changeable features
+ * @requested: mask of features requested to be enabled if possible
+ * @active: mask of currently enabled features
+ * @never_changed: mask of features not changeable for any device
+ */
+struct ethtool_get_features_block {
+ __u32 available;
+ __u32 requested;
+ __u32 active;
+ __u32 never_changed;
+};
+
+/**
+ * struct ethtool_gfeatures - command to get state of device's features
+ * @cmd: command number = %ETHTOOL_GFEATURES
+ * @size: On entry, the number of elements in the features[] array;
+ * on return, the number of elements in features[] needed to hold
+ * all features
+ * @features: state of features
+ */
+struct ethtool_gfeatures {
+ __u32 cmd;
+ __u32 size;
+ struct ethtool_get_features_block features[0];
+};
+
+/**
+ * struct ethtool_set_features_block - block with request for 32 features
+ * @valid: mask of features to be changed
+ * @requested: values of features to be changed
+ */
+struct ethtool_set_features_block {
+ __u32 valid;
+ __u32 requested;
+};
+
+/**
+ * struct ethtool_sfeatures - command to request change in device's features
+ * @cmd: command number = %ETHTOOL_SFEATURES
+ * @size: array size of the features[] array
+ * @features: feature change masks
+ */
+struct ethtool_sfeatures {
+ __u32 cmd;
+ __u32 size;
+ struct ethtool_set_features_block features[0];
+};
+
+/**
+ * struct ethtool_ts_info - holds a device's timestamping and PHC association
+ * @cmd: command number = %ETHTOOL_GET_TS_INFO
+ * @so_timestamping: bit mask of the sum of the supported SO_TIMESTAMPING flags
+ * @phc_index: device index of the associated PHC, or -1 if there is none
+ * @tx_types: bit mask of the supported hwtstamp_tx_types enumeration values
+ * @rx_filters: bit mask of the supported hwtstamp_rx_filters enumeration values
+ *
+ * The bits in the 'tx_types' and 'rx_filters' fields correspond to
+ * the 'hwtstamp_tx_types' and 'hwtstamp_rx_filters' enumeration values,
+ * respectively. For example, if the device supports HWTSTAMP_TX_ON,
+ * then (1 << HWTSTAMP_TX_ON) in 'tx_types' will be set.
+ */
+struct ethtool_ts_info {
+ __u32 cmd;
+ __u32 so_timestamping;
+ __s32 phc_index;
+ __u32 tx_types;
+ __u32 tx_reserved[3];
+ __u32 rx_filters;
+ __u32 rx_reserved[3];
+};
+
+/*
+ * %ETHTOOL_SFEATURES changes features present in features[].valid to the
+ * values of corresponding bits in features[].requested. Bits in .requested
+ * not set in .valid or not changeable are ignored.
+ *
+ * Returns %EINVAL when .valid contains undefined or never-changeable bits
+ * or size is not equal to required number of features words (32-bit blocks).
+ * Returns >= 0 if request was completed; bits set in the value mean:
+ * %ETHTOOL_F_UNSUPPORTED - there were bits set in .valid that are not
+ * changeable (not present in %ETHTOOL_GFEATURES' features[].available)
+ * those bits were ignored.
+ * %ETHTOOL_F_WISH - some or all changes requested were recorded but the
+ * resulting state of bits masked by .valid is not equal to .requested.
+ * Probably there are other device-specific constraints on some features
+ * in the set. When %ETHTOOL_F_UNSUPPORTED is set, .valid is considered
+ * here as though ignored bits were cleared.
+ * %ETHTOOL_F_COMPAT - some or all changes requested were made by calling
+ * compatibility functions. Requested offload state cannot be properly
+ * managed by kernel.
+ *
+ * Meaning of bits in the masks are obtained by %ETHTOOL_GSSET_INFO (number of
+ * bits in the arrays - always multiple of 32) and %ETHTOOL_GSTRINGS commands
+ * for ETH_SS_FEATURES string set. First entry in the table corresponds to least
+ * significant bit in features[0] fields. Empty strings mark undefined features.
+ */
+enum ethtool_sfeatures_retval_bits {
+ ETHTOOL_F_UNSUPPORTED__BIT,
+ ETHTOOL_F_WISH__BIT,
+ ETHTOOL_F_COMPAT__BIT,
+};
+
+#define ETHTOOL_F_UNSUPPORTED (1 << ETHTOOL_F_UNSUPPORTED__BIT)
+#define ETHTOOL_F_WISH (1 << ETHTOOL_F_WISH__BIT)
+#define ETHTOOL_F_COMPAT (1 << ETHTOOL_F_COMPAT__BIT)
+
+
+/* CMDs currently supported */
+#define ETHTOOL_GSET 0x00000001 /* Get settings. */
+#define ETHTOOL_SSET 0x00000002 /* Set settings. */
+#define ETHTOOL_GDRVINFO 0x00000003 /* Get driver info. */
+#define ETHTOOL_GREGS 0x00000004 /* Get NIC registers. */
+#define ETHTOOL_GWOL 0x00000005 /* Get wake-on-lan options. */
+#define ETHTOOL_SWOL 0x00000006 /* Set wake-on-lan options. */
+#define ETHTOOL_GMSGLVL 0x00000007 /* Get driver message level */
+#define ETHTOOL_SMSGLVL 0x00000008 /* Set driver msg level. */
+#define ETHTOOL_NWAY_RST 0x00000009 /* Restart autonegotiation. */
+/* Get link status for host, i.e. whether the interface *and* the
+ * physical port (if there is one) are up (ethtool_value). */
+#define ETHTOOL_GLINK 0x0000000a
+#define ETHTOOL_GEEPROM 0x0000000b /* Get EEPROM data */
+#define ETHTOOL_SEEPROM 0x0000000c /* Set EEPROM data. */
+#define ETHTOOL_GCOALESCE 0x0000000e /* Get coalesce config */
+#define ETHTOOL_SCOALESCE 0x0000000f /* Set coalesce config. */
+#define ETHTOOL_GRINGPARAM 0x00000010 /* Get ring parameters */
+#define ETHTOOL_SRINGPARAM 0x00000011 /* Set ring parameters. */
+#define ETHTOOL_GPAUSEPARAM 0x00000012 /* Get pause parameters */
+#define ETHTOOL_SPAUSEPARAM 0x00000013 /* Set pause parameters. */
+#define ETHTOOL_GRXCSUM 0x00000014 /* Get RX hw csum enable (ethtool_value) */
+#define ETHTOOL_SRXCSUM 0x00000015 /* Set RX hw csum enable (ethtool_value) */
+#define ETHTOOL_GTXCSUM 0x00000016 /* Get TX hw csum enable (ethtool_value) */
+#define ETHTOOL_STXCSUM 0x00000017 /* Set TX hw csum enable (ethtool_value) */
+#define ETHTOOL_GSG 0x00000018 /* Get scatter-gather enable
+ * (ethtool_value) */
+#define ETHTOOL_SSG 0x00000019 /* Set scatter-gather enable
+ * (ethtool_value). */
+#define ETHTOOL_TEST 0x0000001a /* execute NIC self-test. */
+#define ETHTOOL_GSTRINGS 0x0000001b /* get specified string set */
+#define ETHTOOL_PHYS_ID 0x0000001c /* identify the NIC */
+#define ETHTOOL_GSTATS 0x0000001d /* get NIC-specific statistics */
+#define ETHTOOL_GTSO 0x0000001e /* Get TSO enable (ethtool_value) */
+#define ETHTOOL_STSO 0x0000001f /* Set TSO enable (ethtool_value) */
+#define ETHTOOL_GPERMADDR 0x00000020 /* Get permanent hardware address */
+#define ETHTOOL_GUFO 0x00000021 /* Get UFO enable (ethtool_value) */
+#define ETHTOOL_SUFO 0x00000022 /* Set UFO enable (ethtool_value) */
+#define ETHTOOL_GGSO 0x00000023 /* Get GSO enable (ethtool_value) */
+#define ETHTOOL_SGSO 0x00000024 /* Set GSO enable (ethtool_value) */
+#define ETHTOOL_GFLAGS 0x00000025 /* Get flags bitmap(ethtool_value) */
+#define ETHTOOL_SFLAGS 0x00000026 /* Set flags bitmap(ethtool_value) */
+#define ETHTOOL_GPFLAGS 0x00000027 /* Get driver-private flags bitmap */
+#define ETHTOOL_SPFLAGS 0x00000028 /* Set driver-private flags bitmap */
+
+#define ETHTOOL_GRXFH 0x00000029 /* Get RX flow hash configuration */
+#define ETHTOOL_SRXFH 0x0000002a /* Set RX flow hash configuration */
+#define ETHTOOL_GGRO 0x0000002b /* Get GRO enable (ethtool_value) */
+#define ETHTOOL_SGRO 0x0000002c /* Set GRO enable (ethtool_value) */
+#define ETHTOOL_GRXRINGS 0x0000002d /* Get RX rings available for LB */
+#define ETHTOOL_GRXCLSRLCNT 0x0000002e /* Get RX class rule count */
+#define ETHTOOL_GRXCLSRULE 0x0000002f /* Get RX classification rule */
+#define ETHTOOL_GRXCLSRLALL 0x00000030 /* Get all RX classification rule */
+#define ETHTOOL_SRXCLSRLDEL 0x00000031 /* Delete RX classification rule */
+#define ETHTOOL_SRXCLSRLINS 0x00000032 /* Insert RX classification rule */
+#define ETHTOOL_FLASHDEV 0x00000033 /* Flash firmware to device */
+#define ETHTOOL_RESET 0x00000034 /* Reset hardware */
+#define ETHTOOL_SRXNTUPLE 0x00000035 /* Add an n-tuple filter to device */
+#define ETHTOOL_GRXNTUPLE 0x00000036 /* deprecated */
+#define ETHTOOL_GSSET_INFO 0x00000037 /* Get string set info */
+#define ETHTOOL_GRXFHINDIR 0x00000038 /* Get RX flow hash indir'n table */
+#define ETHTOOL_SRXFHINDIR 0x00000039 /* Set RX flow hash indir'n table */
+
+#define ETHTOOL_GFEATURES 0x0000003a /* Get device offload settings */
+#define ETHTOOL_SFEATURES 0x0000003b /* Change device offload settings */
+#define ETHTOOL_GCHANNELS 0x0000003c /* Get no of channels */
+#define ETHTOOL_SCHANNELS 0x0000003d /* Set no of channels */
+#define ETHTOOL_SET_DUMP 0x0000003e /* Set dump settings */
+#define ETHTOOL_GET_DUMP_FLAG 0x0000003f /* Get dump settings */
+#define ETHTOOL_GET_DUMP_DATA 0x00000040 /* Get dump data */
+#define ETHTOOL_GET_TS_INFO 0x00000041 /* Get time stamping and PHC info */
+#define ETHTOOL_GMODULEINFO 0x00000042 /* Get plug-in module information */
+#define ETHTOOL_GMODULEEEPROM 0x00000043 /* Get plug-in module eeprom */
+#define ETHTOOL_GEEE 0x00000044 /* Get EEE settings */
+#define ETHTOOL_SEEE 0x00000045 /* Set EEE settings */
+
+#define ETHTOOL_GRSSH 0x00000046 /* Get RX flow hash configuration */
+#define ETHTOOL_SRSSH 0x00000047 /* Set RX flow hash configuration */
+#define ETHTOOL_GTUNABLE 0x00000048 /* Get tunable configuration */
+#define ETHTOOL_STUNABLE 0x00000049 /* Set tunable configuration */
+
+/* compatibility with older code */
+#define SPARC_ETH_GSET ETHTOOL_GSET
+#define SPARC_ETH_SSET ETHTOOL_SSET
+
+#define SUPPORTED_10baseT_Half (1 << 0)
+#define SUPPORTED_10baseT_Full (1 << 1)
+#define SUPPORTED_100baseT_Half (1 << 2)
+#define SUPPORTED_100baseT_Full (1 << 3)
+#define SUPPORTED_1000baseT_Half (1 << 4)
+#define SUPPORTED_1000baseT_Full (1 << 5)
+#define SUPPORTED_Autoneg (1 << 6)
+#define SUPPORTED_TP (1 << 7)
+#define SUPPORTED_AUI (1 << 8)
+#define SUPPORTED_MII (1 << 9)
+#define SUPPORTED_FIBRE (1 << 10)
+#define SUPPORTED_BNC (1 << 11)
+#define SUPPORTED_10000baseT_Full (1 << 12)
+#define SUPPORTED_Pause (1 << 13)
+#define SUPPORTED_Asym_Pause (1 << 14)
+#define SUPPORTED_2500baseX_Full (1 << 15)
+#define SUPPORTED_Backplane (1 << 16)
+#define SUPPORTED_1000baseKX_Full (1 << 17)
+#define SUPPORTED_10000baseKX4_Full (1 << 18)
+#define SUPPORTED_10000baseKR_Full (1 << 19)
+#define SUPPORTED_10000baseR_FEC (1 << 20)
+#define SUPPORTED_20000baseMLD2_Full (1 << 21)
+#define SUPPORTED_20000baseKR2_Full (1 << 22)
+#define SUPPORTED_40000baseKR4_Full (1 << 23)
+#define SUPPORTED_40000baseCR4_Full (1 << 24)
+#define SUPPORTED_40000baseSR4_Full (1 << 25)
+#define SUPPORTED_40000baseLR4_Full (1 << 26)
+#define SUPPORTED_56000baseKR4_Full (1 << 27)
+#define SUPPORTED_56000baseCR4_Full (1 << 28)
+#define SUPPORTED_56000baseSR4_Full (1 << 29)
+#define SUPPORTED_56000baseLR4_Full (1 << 30)
+
+#define ADVERTISED_10baseT_Half (1 << 0)
+#define ADVERTISED_10baseT_Full (1 << 1)
+#define ADVERTISED_100baseT_Half (1 << 2)
+#define ADVERTISED_100baseT_Full (1 << 3)
+#define ADVERTISED_1000baseT_Half (1 << 4)
+#define ADVERTISED_1000baseT_Full (1 << 5)
+#define ADVERTISED_Autoneg (1 << 6)
+#define ADVERTISED_TP (1 << 7)
+#define ADVERTISED_AUI (1 << 8)
+#define ADVERTISED_MII (1 << 9)
+#define ADVERTISED_FIBRE (1 << 10)
+#define ADVERTISED_BNC (1 << 11)
+#define ADVERTISED_10000baseT_Full (1 << 12)
+#define ADVERTISED_Pause (1 << 13)
+#define ADVERTISED_Asym_Pause (1 << 14)
+#define ADVERTISED_2500baseX_Full (1 << 15)
+#define ADVERTISED_Backplane (1 << 16)
+#define ADVERTISED_1000baseKX_Full (1 << 17)
+#define ADVERTISED_10000baseKX4_Full (1 << 18)
+#define ADVERTISED_10000baseKR_Full (1 << 19)
+#define ADVERTISED_10000baseR_FEC (1 << 20)
+#define ADVERTISED_20000baseMLD2_Full (1 << 21)
+#define ADVERTISED_20000baseKR2_Full (1 << 22)
+#define ADVERTISED_40000baseKR4_Full (1 << 23)
+#define ADVERTISED_40000baseCR4_Full (1 << 24)
+#define ADVERTISED_40000baseSR4_Full (1 << 25)
+#define ADVERTISED_40000baseLR4_Full (1 << 26)
+#define ADVERTISED_56000baseKR4_Full (1 << 27)
+#define ADVERTISED_56000baseCR4_Full (1 << 28)
+#define ADVERTISED_56000baseSR4_Full (1 << 29)
+#define ADVERTISED_56000baseLR4_Full (1 << 30)
+
+/* The following are all involved in forcing a particular link
+ * mode for the device for setting things. When getting the
+ * devices settings, these indicate the current mode and whether
+ * it was forced up into this mode or autonegotiated.
+ */
+
+/* The forced speed, 10Mb, 100Mb, gigabit, [2.5|10|20|40|56]GbE. */
+#define SPEED_10 10
+#define SPEED_100 100
+#define SPEED_1000 1000
+#define SPEED_2500 2500
+#define SPEED_10000 10000
+#define SPEED_20000 20000
+#define SPEED_40000 40000
+#define SPEED_56000 56000
+
+#define SPEED_UNKNOWN -1
+
+/* Duplex, half or full. */
+#define DUPLEX_HALF 0x00
+#define DUPLEX_FULL 0x01
+#define DUPLEX_UNKNOWN 0xff
+
+/* Which connector port. */
+#define PORT_TP 0x00
+#define PORT_AUI 0x01
+#define PORT_MII 0x02
+#define PORT_FIBRE 0x03
+#define PORT_BNC 0x04
+#define PORT_DA 0x05
+#define PORT_NONE 0xef
+#define PORT_OTHER 0xff
+
+/* Which transceiver to use. */
+#define XCVR_INTERNAL 0x00 /* PHY and MAC are in the same package */
+#define XCVR_EXTERNAL 0x01 /* PHY and MAC are in different packages */
+#define XCVR_DUMMY1 0x02
+#define XCVR_DUMMY2 0x03
+#define XCVR_DUMMY3 0x04
+
+/* Enable or disable autonegotiation. */
+#define AUTONEG_DISABLE 0x00
+#define AUTONEG_ENABLE 0x01
+
+/* MDI or MDI-X status/control - if MDI/MDI_X/AUTO is set then
+ * the driver is required to renegotiate link
+ */
+#define ETH_TP_MDI_INVALID 0x00 /* status: unknown; control: unsupported */
+#define ETH_TP_MDI 0x01 /* status: MDI; control: force MDI */
+#define ETH_TP_MDI_X 0x02 /* status: MDI-X; control: force MDI-X */
+#define ETH_TP_MDI_AUTO 0x03 /* control: auto-select */
+
+/* Wake-On-Lan options. */
+#define WAKE_PHY (1 << 0)
+#define WAKE_UCAST (1 << 1)
+#define WAKE_MCAST (1 << 2)
+#define WAKE_BCAST (1 << 3)
+#define WAKE_ARP (1 << 4)
+#define WAKE_MAGIC (1 << 5)
+#define WAKE_MAGICSECURE (1 << 6) /* only meaningful if WAKE_MAGIC */
+
+/* L2-L4 network traffic flow types */
+#define TCP_V4_FLOW 0x01 /* hash or spec (tcp_ip4_spec) */
+#define UDP_V4_FLOW 0x02 /* hash or spec (udp_ip4_spec) */
+#define SCTP_V4_FLOW 0x03 /* hash or spec (sctp_ip4_spec) */
+#define AH_ESP_V4_FLOW 0x04 /* hash only */
+#define TCP_V6_FLOW 0x05 /* hash only */
+#define UDP_V6_FLOW 0x06 /* hash only */
+#define SCTP_V6_FLOW 0x07 /* hash only */
+#define AH_ESP_V6_FLOW 0x08 /* hash only */
+#define AH_V4_FLOW 0x09 /* hash or spec (ah_ip4_spec) */
+#define ESP_V4_FLOW 0x0a /* hash or spec (esp_ip4_spec) */
+#define AH_V6_FLOW 0x0b /* hash only */
+#define ESP_V6_FLOW 0x0c /* hash only */
+#define IP_USER_FLOW 0x0d /* spec only (usr_ip4_spec) */
+#define IPV4_FLOW 0x10 /* hash only */
+#define IPV6_FLOW 0x11 /* hash only */
+#define ETHER_FLOW 0x12 /* spec only (ether_spec) */
+/* Flag to enable additional fields in struct ethtool_rx_flow_spec */
+#define FLOW_EXT 0x80000000
+#define FLOW_MAC_EXT 0x40000000
+
+/* L3-L4 network traffic flow hash options */
+#define RXH_L2DA (1 << 1)
+#define RXH_VLAN (1 << 2)
+#define RXH_L3_PROTO (1 << 3)
+#define RXH_IP_SRC (1 << 4)
+#define RXH_IP_DST (1 << 5)
+#define RXH_L4_B_0_1 (1 << 6) /* src port in case of TCP/UDP/SCTP */
+#define RXH_L4_B_2_3 (1 << 7) /* dst port in case of TCP/UDP/SCTP */
+#define RXH_DISCARD (1 << 31)
+
+#define RX_CLS_FLOW_DISC 0xffffffffffffffffULL
+
+/* Special RX classification rule insert location values */
+#define RX_CLS_LOC_SPECIAL 0x80000000 /* flag */
+#define RX_CLS_LOC_ANY 0xffffffff
+#define RX_CLS_LOC_FIRST 0xfffffffe
+#define RX_CLS_LOC_LAST 0xfffffffd
+
+/* EEPROM Standards for plug in modules */
+#define ETH_MODULE_SFF_8079 0x1
+#define ETH_MODULE_SFF_8079_LEN 256
+#define ETH_MODULE_SFF_8472 0x2
+#define ETH_MODULE_SFF_8472_LEN 512
+#define ETH_MODULE_SFF_8636 0x3
+#define ETH_MODULE_SFF_8636_LEN 256
+#define ETH_MODULE_SFF_8436 0x4
+#define ETH_MODULE_SFF_8436_LEN 256
+
+/* Reset flags */
+/* The reset() operation must clear the flags for the components which
+ * were actually reset. On successful return, the flags indicate the
+ * components which were not reset, either because they do not exist
+ * in the hardware or because they cannot be reset independently. The
+ * driver must never reset any components that were not requested.
+ */
+enum ethtool_reset_flags {
+ /* These flags represent components dedicated to the interface
+ * the command is addressed to. Shift any flag left by
+ * ETH_RESET_SHARED_SHIFT to reset a shared component of the
+ * same type.
+ */
+ ETH_RESET_MGMT = 1 << 0, /* Management processor */
+ ETH_RESET_IRQ = 1 << 1, /* Interrupt requester */
+ ETH_RESET_DMA = 1 << 2, /* DMA engine */
+ ETH_RESET_FILTER = 1 << 3, /* Filtering/flow direction */
+ ETH_RESET_OFFLOAD = 1 << 4, /* Protocol offload */
+ ETH_RESET_MAC = 1 << 5, /* Media access controller */
+ ETH_RESET_PHY = 1 << 6, /* Transceiver/PHY */
+ ETH_RESET_RAM = 1 << 7, /* RAM shared between
+ * multiple components */
+
+ ETH_RESET_DEDICATED = 0x0000ffff, /* All components dedicated to
+ * this interface */
+ ETH_RESET_ALL = 0xffffffff, /* All components used by this
+ * interface, even if shared */
+};
+#define ETH_RESET_SHARED_SHIFT 16
+
+#endif /* _UAPI_LINUX_ETHTOOL_H */