These changes are the raw update to linux-4.4.6-rt14. Kernel sources

are taken from kernel.org, and rt patch from the rt wiki download page.

During the rebasing, the following patch collided:

Force tick interrupt and get rid of softirq magic(I70131fb85).

Collisions have been removed because its logic was found on the
source already.

Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>

1 files changed, 3 insertions, 288 deletions

diff --git a/kernel/include/scsi/scsi.h b/kernel/include/scsi/scsi.h
index d0a66aa18..e0a3398b1 100644
--- a/kernel/include/scsi/scsi.h
+++ b/kernel/include/scsi/scsi.h
@@ -1,9 +1,6 @@
 /*
  * This header file contains public constants and structures used by
- * the scsi code for linux.
- *
- * For documentation on the OPCODES, MESSAGES, and SENSE values,
- * please consult the SCSI standard.
+ * the SCSI initiator code.
  */
 #ifndef _SCSI_SCSI_H
 #define _SCSI_SCSI_H
@@ -11,6 +8,8 @@
 #include <linux/types.h>
 #include <linux/scatterlist.h>
 #include <linux/kernel.h>
+#include <scsi/scsi_common.h>
+#include <scsi/scsi_proto.h>
 
 struct scsi_cmnd;
 
@@ -49,187 +48,6 @@ enum scsi_timeouts {
  */
 #define SCAN_WILD_CARD	~0
 
-/*
- *      SCSI opcodes
- */
-
-#define TEST_UNIT_READY       0x00
-#define REZERO_UNIT           0x01
-#define REQUEST_SENSE         0x03
-#define FORMAT_UNIT           0x04
-#define READ_BLOCK_LIMITS     0x05
-#define REASSIGN_BLOCKS       0x07
-#define INITIALIZE_ELEMENT_STATUS 0x07
-#define READ_6                0x08
-#define WRITE_6               0x0a
-#define SEEK_6                0x0b
-#define READ_REVERSE          0x0f
-#define WRITE_FILEMARKS       0x10
-#define SPACE                 0x11
-#define INQUIRY               0x12
-#define RECOVER_BUFFERED_DATA 0x14
-#define MODE_SELECT           0x15
-#define RESERVE               0x16
-#define RELEASE               0x17
-#define COPY                  0x18
-#define ERASE                 0x19
-#define MODE_SENSE            0x1a
-#define START_STOP            0x1b
-#define RECEIVE_DIAGNOSTIC    0x1c
-#define SEND_DIAGNOSTIC       0x1d
-#define ALLOW_MEDIUM_REMOVAL  0x1e
-
-#define READ_FORMAT_CAPACITIES 0x23
-#define SET_WINDOW            0x24
-#define READ_CAPACITY         0x25
-#define READ_10               0x28
-#define WRITE_10              0x2a
-#define SEEK_10               0x2b
-#define POSITION_TO_ELEMENT   0x2b
-#define WRITE_VERIFY          0x2e
-#define VERIFY                0x2f
-#define SEARCH_HIGH           0x30
-#define SEARCH_EQUAL          0x31
-#define SEARCH_LOW            0x32
-#define SET_LIMITS            0x33
-#define PRE_FETCH             0x34
-#define READ_POSITION         0x34
-#define SYNCHRONIZE_CACHE     0x35
-#define LOCK_UNLOCK_CACHE     0x36
-#define READ_DEFECT_DATA      0x37
-#define MEDIUM_SCAN           0x38
-#define COMPARE               0x39
-#define COPY_VERIFY           0x3a
-#define WRITE_BUFFER          0x3b
-#define READ_BUFFER           0x3c
-#define UPDATE_BLOCK          0x3d
-#define READ_LONG             0x3e
-#define WRITE_LONG            0x3f
-#define CHANGE_DEFINITION     0x40
-#define WRITE_SAME            0x41
-#define UNMAP		      0x42
-#define READ_TOC              0x43
-#define READ_HEADER           0x44
-#define GET_EVENT_STATUS_NOTIFICATION 0x4a
-#define LOG_SELECT            0x4c
-#define LOG_SENSE             0x4d
-#define XDWRITEREAD_10        0x53
-#define MODE_SELECT_10        0x55
-#define RESERVE_10            0x56
-#define RELEASE_10            0x57
-#define MODE_SENSE_10         0x5a
-#define PERSISTENT_RESERVE_IN 0x5e
-#define PERSISTENT_RESERVE_OUT 0x5f
-#define VARIABLE_LENGTH_CMD   0x7f
-#define REPORT_LUNS           0xa0
-#define SECURITY_PROTOCOL_IN  0xa2
-#define MAINTENANCE_IN        0xa3
-#define MAINTENANCE_OUT       0xa4
-#define MOVE_MEDIUM           0xa5
-#define EXCHANGE_MEDIUM       0xa6
-#define READ_12               0xa8
-#define SERVICE_ACTION_OUT_12 0xa9
-#define WRITE_12              0xaa
-#define READ_MEDIA_SERIAL_NUMBER 0xab /* Obsolete with SPC-2 */
-#define SERVICE_ACTION_IN_12  0xab
-#define WRITE_VERIFY_12       0xae
-#define VERIFY_12	      0xaf
-#define SEARCH_HIGH_12        0xb0
-#define SEARCH_EQUAL_12       0xb1
-#define SEARCH_LOW_12         0xb2
-#define SECURITY_PROTOCOL_OUT 0xb5
-#define READ_ELEMENT_STATUS   0xb8
-#define SEND_VOLUME_TAG       0xb6
-#define WRITE_LONG_2          0xea
-#define EXTENDED_COPY         0x83
-#define RECEIVE_COPY_RESULTS  0x84
-#define ACCESS_CONTROL_IN     0x86
-#define ACCESS_CONTROL_OUT    0x87
-#define READ_16               0x88
-#define COMPARE_AND_WRITE     0x89
-#define WRITE_16              0x8a
-#define READ_ATTRIBUTE        0x8c
-#define WRITE_ATTRIBUTE	      0x8d
-#define VERIFY_16	      0x8f
-#define SYNCHRONIZE_CACHE_16  0x91
-#define WRITE_SAME_16	      0x93
-#define SERVICE_ACTION_BIDIRECTIONAL 0x9d
-#define SERVICE_ACTION_IN_16  0x9e
-#define SERVICE_ACTION_OUT_16 0x9f
-/* values for service action in */
-#define	SAI_READ_CAPACITY_16  0x10
-#define SAI_GET_LBA_STATUS    0x12
-#define SAI_REPORT_REFERRALS  0x13
-/* values for VARIABLE_LENGTH_CMD service action codes
- * see spc4r17 Section D.3.5, table D.7 and D.8 */
-#define VLC_SA_RECEIVE_CREDENTIAL 0x1800
-/* values for maintenance in */
-#define MI_REPORT_IDENTIFYING_INFORMATION 0x05
-#define MI_REPORT_TARGET_PGS  0x0a
-#define MI_REPORT_ALIASES     0x0b
-#define MI_REPORT_SUPPORTED_OPERATION_CODES 0x0c
-#define MI_REPORT_SUPPORTED_TASK_MANAGEMENT_FUNCTIONS 0x0d
-#define MI_REPORT_PRIORITY    0x0e
-#define MI_REPORT_TIMESTAMP   0x0f
-#define MI_MANAGEMENT_PROTOCOL_IN 0x10
-/* value for MI_REPORT_TARGET_PGS ext header */
-#define MI_EXT_HDR_PARAM_FMT  0x20
-/* values for maintenance out */
-#define MO_SET_IDENTIFYING_INFORMATION 0x06
-#define MO_SET_TARGET_PGS     0x0a
-#define MO_CHANGE_ALIASES     0x0b
-#define MO_SET_PRIORITY       0x0e
-#define MO_SET_TIMESTAMP      0x0f
-#define MO_MANAGEMENT_PROTOCOL_OUT 0x10
-/* values for variable length command */
-#define XDREAD_32	      0x03
-#define XDWRITE_32	      0x04
-#define XPWRITE_32	      0x06
-#define XDWRITEREAD_32	      0x07
-#define READ_32		      0x09
-#define VERIFY_32	      0x0a
-#define WRITE_32	      0x0b
-#define WRITE_SAME_32	      0x0d
-
-/* Values for T10/04-262r7 */
-#define	ATA_16		      0x85	/* 16-byte pass-thru */
-#define	ATA_12		      0xa1	/* 12-byte pass-thru */
-
-/* Vendor specific CDBs start here */
-#define VENDOR_SPECIFIC_CDB 0xc0
-
-/*
- *	SCSI command lengths
- */
-
-#define SCSI_MAX_VARLEN_CDB_SIZE 260
-
-/* defined in T10 SCSI Primary Commands-2 (SPC2) */
-struct scsi_varlen_cdb_hdr {
-	__u8 opcode;        /* opcode always == VARIABLE_LENGTH_CMD */
-	__u8 control;
-	__u8 misc[5];
-	__u8 additional_cdb_length;         /* total cdb length - 8 */
-	__be16 service_action;
-	/* service specific data follows */
-};
-
-static inline unsigned
-scsi_varlen_cdb_length(const void *hdr)
-{
-	return ((struct scsi_varlen_cdb_hdr *)hdr)->additional_cdb_length + 8;
-}
-
-extern const unsigned char scsi_command_size_tbl[8];
-#define COMMAND_SIZE(opcode) scsi_command_size_tbl[((opcode) >> 5) & 7]
-
-static inline unsigned
-scsi_command_size(const unsigned char *cmnd)
-{
-	return (cmnd[0] == VARIABLE_LENGTH_CMD) ?
-		scsi_varlen_cdb_length(cmnd) : COMMAND_SIZE(cmnd[0]);
-}
-
 #ifdef CONFIG_ACPI
 struct acpi_bus_type;
 
@@ -240,22 +58,6 @@ extern void
 scsi_unregister_acpi_bus_type(struct acpi_bus_type *bus);
 #endif
 
-/*
- *  SCSI Architecture Model (SAM) Status codes. Taken from SAM-3 draft
- *  T10/1561-D Revision 4 Draft dated 7th November 2002.
- */
-#define SAM_STAT_GOOD            0x00
-#define SAM_STAT_CHECK_CONDITION 0x02
-#define SAM_STAT_CONDITION_MET   0x04
-#define SAM_STAT_BUSY            0x08
-#define SAM_STAT_INTERMEDIATE    0x10
-#define SAM_STAT_INTERMEDIATE_CONDITION_MET 0x14
-#define SAM_STAT_RESERVATION_CONFLICT 0x18
-#define SAM_STAT_COMMAND_TERMINATED 0x22	/* obsolete in SAM-3 */
-#define SAM_STAT_TASK_SET_FULL   0x28
-#define SAM_STAT_ACA_ACTIVE      0x30
-#define SAM_STAT_TASK_ABORTED    0x40
-
 /** scsi_status_is_good - check the status return.
  *
  * @status: the status passed up from the driver (including host and
@@ -279,86 +81,6 @@ static inline int scsi_status_is_good(int status)
 		(status == SAM_STAT_COMMAND_TERMINATED));
 }
 
-/*
- *  Status codes. These are deprecated as they are shifted 1 bit right
- *  from those found in the SCSI standards. This causes confusion for
- *  applications that are ported to several OSes. Prefer SAM Status codes
- *  above.
- */
-
-#define GOOD                 0x00
-#define CHECK_CONDITION      0x01
-#define CONDITION_GOOD       0x02
-#define BUSY                 0x04
-#define INTERMEDIATE_GOOD    0x08
-#define INTERMEDIATE_C_GOOD  0x0a
-#define RESERVATION_CONFLICT 0x0c
-#define COMMAND_TERMINATED   0x11
-#define QUEUE_FULL           0x14
-#define ACA_ACTIVE           0x18
-#define TASK_ABORTED         0x20
-
-#define STATUS_MASK          0xfe
-
-/*
- *  SENSE KEYS
- */
-
-#define NO_SENSE            0x00
-#define RECOVERED_ERROR     0x01
-#define NOT_READY           0x02
-#define MEDIUM_ERROR        0x03
-#define HARDWARE_ERROR      0x04
-#define ILLEGAL_REQUEST     0x05
-#define UNIT_ATTENTION      0x06
-#define DATA_PROTECT        0x07
-#define BLANK_CHECK         0x08
-#define COPY_ABORTED        0x0a
-#define ABORTED_COMMAND     0x0b
-#define VOLUME_OVERFLOW     0x0d
-#define MISCOMPARE          0x0e
-
-
-/*
- *  DEVICE TYPES
- *  Please keep them in 0x%02x format for $MODALIAS to work
- */
-
-#define TYPE_DISK           0x00
-#define TYPE_TAPE           0x01
-#define TYPE_PRINTER        0x02
-#define TYPE_PROCESSOR      0x03    /* HP scanners use this */
-#define TYPE_WORM           0x04    /* Treated as ROM by our system */
-#define TYPE_ROM            0x05
-#define TYPE_SCANNER        0x06
-#define TYPE_MOD            0x07    /* Magneto-optical disk - 
-				     * - treated as TYPE_DISK */
-#define TYPE_MEDIUM_CHANGER 0x08
-#define TYPE_COMM           0x09    /* Communications device */
-#define TYPE_RAID           0x0c
-#define TYPE_ENCLOSURE      0x0d    /* Enclosure Services Device */
-#define TYPE_RBC	    0x0e
-#define TYPE_OSD            0x11
-#define TYPE_ZBC            0x14
-#define TYPE_WLUN           0x1e    /* well-known logical unit */
-#define TYPE_NO_LUN         0x7f
-
-/* SCSI protocols; these are taken from SPC-3 section 7.5 */
-enum scsi_protocol {
-	SCSI_PROTOCOL_FCP = 0,	/* Fibre Channel */
-	SCSI_PROTOCOL_SPI = 1,	/* parallel SCSI */
-	SCSI_PROTOCOL_SSA = 2,	/* Serial Storage Architecture - Obsolete */
-	SCSI_PROTOCOL_SBP = 3,	/* firewire */
-	SCSI_PROTOCOL_SRP = 4,	/* Infiniband RDMA */
-	SCSI_PROTOCOL_ISCSI = 5,
-	SCSI_PROTOCOL_SAS = 6,
-	SCSI_PROTOCOL_ADT = 7,	/* Media Changers */
-	SCSI_PROTOCOL_ATA = 8,
-	SCSI_PROTOCOL_UNSPEC = 0xf, /* No specific protocol */
-};
-
-/* Returns a human-readable name for the device */
-extern const char * scsi_device_type(unsigned type);
 
 /*
  * standard mode-select header prepended to all mode-select commands
@@ -380,13 +102,6 @@ struct ccs_modesel_head {
 };
 
 /*
- * ScsiLun: 8 byte LUN.
- */
-struct scsi_lun {
-	__u8 scsi_lun[8];
-};
-
-/*
  * The Well Known LUNS (SAM-3) in our int representation of a LUN
  */
 #define SCSI_W_LUN_BASE 0xc100