Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

1 files changed, 89 insertions, 0 deletions

diff --git a/kernel/include/linux/usb/tegra_usb_phy.h b/kernel/include/linux/usb/tegra_usb_phy.h
new file mode 100644
index 000000000..1de16c324
--- /dev/null
+++ b/kernel/include/linux/usb/tegra_usb_phy.h
@@ -0,0 +1,89 @@
+/*
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __TEGRA_USB_PHY_H
+#define __TEGRA_USB_PHY_H
+
+#include <linux/clk.h>
+#include <linux/usb/otg.h>
+
+/*
+ * utmi_pll_config_in_car_module: true if the UTMI PLL configuration registers
+ *     should be set up by clk-tegra, false if by the PHY code
+ * has_hostpc: true if the USB controller has the HOSTPC extension, which
+ *     changes the location of the PHCD and PTS fields
+ * requires_usbmode_setup: true if the USBMODE register needs to be set to
+ *      enter host mode
+ * requires_extra_tuning_parameters: true if xcvr_hsslew, hssquelch_level
+ *      and hsdiscon_level should be set for adequate signal quality
+ */
+
+struct tegra_phy_soc_config {
+	bool utmi_pll_config_in_car_module;
+	bool has_hostpc;
+	bool requires_usbmode_setup;
+	bool requires_extra_tuning_parameters;
+};
+
+struct tegra_utmip_config {
+	u8 hssync_start_delay;
+	u8 elastic_limit;
+	u8 idle_wait_delay;
+	u8 term_range_adj;
+	bool xcvr_setup_use_fuses;
+	u8 xcvr_setup;
+	u8 xcvr_lsfslew;
+	u8 xcvr_lsrslew;
+	u8 xcvr_hsslew;
+	u8 hssquelch_level;
+	u8 hsdiscon_level;
+};
+
+enum tegra_usb_phy_port_speed {
+	TEGRA_USB_PHY_PORT_SPEED_FULL = 0,
+	TEGRA_USB_PHY_PORT_SPEED_LOW,
+	TEGRA_USB_PHY_PORT_SPEED_HIGH,
+};
+
+struct tegra_xtal_freq;
+
+struct tegra_usb_phy {
+	int instance;
+	const struct tegra_xtal_freq *freq;
+	void __iomem *regs;
+	void __iomem *pad_regs;
+	struct clk *clk;
+	struct clk *pll_u;
+	struct clk *pad_clk;
+	struct regulator *vbus;
+	enum usb_dr_mode mode;
+	void *config;
+	const struct tegra_phy_soc_config *soc_config;
+	struct usb_phy *ulpi;
+	struct usb_phy u_phy;
+	bool is_legacy_phy;
+	bool is_ulpi_phy;
+	int reset_gpio;
+};
+
+void tegra_usb_phy_preresume(struct usb_phy *phy);
+
+void tegra_usb_phy_postresume(struct usb_phy *phy);
+
+void tegra_ehci_phy_restore_start(struct usb_phy *phy,
+				 enum tegra_usb_phy_port_speed port_speed);
+
+void tegra_ehci_phy_restore_end(struct usb_phy *phy);
+
+#endif /* __TEGRA_USB_PHY_H */