Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

1 files changed, 155 insertions, 0 deletions

diff --git a/kernel/include/linux/usb/musb.h b/kernel/include/linux/usb/musb.h
new file mode 100644
index 000000000..a4ee1b582
--- /dev/null
+++ b/kernel/include/linux/usb/musb.h
@@ -0,0 +1,155 @@
+/*
+ * This is used to for host and peripheral modes of the driver for
+ * Inventra (Multidrop) Highspeed Dual-Role Controllers:  (M)HDRC.
+ *
+ * Board initialization should put one of these into dev->platform_data,
+ * probably on some platform_device named "musb-hdrc".  It encapsulates
+ * key configuration differences between boards.
+ */
+
+#ifndef __LINUX_USB_MUSB_H
+#define __LINUX_USB_MUSB_H
+
+/* The USB role is defined by the connector used on the board, so long as
+ * standards are being followed.  (Developer boards sometimes won't.)
+ */
+enum musb_mode {
+	MUSB_UNDEFINED = 0,
+	MUSB_HOST,		/* A or Mini-A connector */
+	MUSB_PERIPHERAL,	/* B or Mini-B connector */
+	MUSB_OTG		/* Mini-AB connector */
+};
+
+struct clk;
+
+enum musb_fifo_style {
+	FIFO_RXTX,
+	FIFO_TX,
+	FIFO_RX
+} __attribute__ ((packed));
+
+enum musb_buf_mode {
+	BUF_SINGLE,
+	BUF_DOUBLE
+} __attribute__ ((packed));
+
+struct musb_fifo_cfg {
+	u8			hw_ep_num;
+	enum musb_fifo_style	style;
+	enum musb_buf_mode	mode;
+	u16			maxpacket;
+};
+
+#define MUSB_EP_FIFO(ep, st, m, pkt)		\
+{						\
+	.hw_ep_num	= ep,			\
+	.style		= st,			\
+	.mode		= m,			\
+	.maxpacket	= pkt,			\
+}
+
+#define MUSB_EP_FIFO_SINGLE(ep, st, pkt)	\
+	MUSB_EP_FIFO(ep, st, BUF_SINGLE, pkt)
+
+#define MUSB_EP_FIFO_DOUBLE(ep, st, pkt)	\
+	MUSB_EP_FIFO(ep, st, BUF_DOUBLE, pkt)
+
+struct musb_hdrc_eps_bits {
+	const char	name[16];
+	u8		bits;
+};
+
+struct musb_hdrc_config {
+	struct musb_fifo_cfg	*fifo_cfg;	/* board fifo configuration */
+	unsigned		fifo_cfg_size;	/* size of the fifo configuration */
+
+	/* MUSB configuration-specific details */
+	unsigned	multipoint:1;	/* multipoint device */
+	unsigned	dyn_fifo:1 __deprecated; /* supports dynamic fifo sizing */
+	unsigned	soft_con:1 __deprecated; /* soft connect required */
+	unsigned	utm_16:1 __deprecated; /* utm data witdh is 16 bits */
+	unsigned	big_endian:1;	/* true if CPU uses big-endian */
+	unsigned	mult_bulk_tx:1;	/* Tx ep required for multbulk pkts */
+	unsigned	mult_bulk_rx:1;	/* Rx ep required for multbulk pkts */
+	unsigned	high_iso_tx:1;	/* Tx ep required for HB iso */
+	unsigned	high_iso_rx:1;	/* Rx ep required for HD iso */
+	unsigned	dma:1 __deprecated; /* supports DMA */
+	unsigned	vendor_req:1 __deprecated; /* vendor registers required */
+
+	/* need to explicitly de-assert the port reset after resume? */
+	unsigned	host_port_deassert_reset_at_resume:1;
+
+	u8		num_eps;	/* number of endpoints _with_ ep0 */
+	u8		dma_channels __deprecated; /* number of dma channels */
+	u8		dyn_fifo_size;	/* dynamic size in bytes */
+	u8		vendor_ctrl __deprecated; /* vendor control reg width */
+	u8		vendor_stat __deprecated; /* vendor status reg witdh */
+	u8		dma_req_chan __deprecated; /* bitmask for required dma channels */
+	u8		ram_bits;	/* ram address size */
+
+	struct musb_hdrc_eps_bits *eps_bits __deprecated;
+#ifdef CONFIG_BLACKFIN
+	/* A GPIO controlling VRSEL in Blackfin */
+	unsigned int	gpio_vrsel;
+	unsigned int	gpio_vrsel_active;
+	/* musb CLKIN in Blackfin in MHZ */
+	unsigned char   clkin;
+#endif
+
+};
+
+struct musb_hdrc_platform_data {
+	/* MUSB_HOST, MUSB_PERIPHERAL, or MUSB_OTG */
+	u8		mode;
+
+	/* for clk_get() */
+	const char	*clock;
+
+	/* (HOST or OTG) switch VBUS on/off */
+	int		(*set_vbus)(struct device *dev, int is_on);
+
+	/* (HOST or OTG) mA/2 power supplied on (default = 8mA) */
+	u8		power;
+
+	/* (PERIPHERAL) mA/2 max power consumed (default = 100mA) */
+	u8		min_power;
+
+	/* (HOST or OTG) msec/2 after VBUS on till power good */
+	u8		potpgt;
+
+	/* (HOST or OTG) program PHY for external Vbus */
+	unsigned	extvbus:1;
+
+	/* Power the device on or off */
+	int		(*set_power)(int state);
+
+	/* MUSB configuration-specific details */
+	struct musb_hdrc_config	*config;
+
+	/* Architecture specific board data	*/
+	void		*board_data;
+
+	/* Platform specific struct musb_ops pointer */
+	const void	*platform_ops;
+};
+
+
+/* TUSB 6010 support */
+
+#define	TUSB6010_OSCCLK_60	16667	/* psec/clk @ 60.0 MHz */
+#define	TUSB6010_REFCLK_24	41667	/* psec/clk @ 24.0 MHz XI */
+#define	TUSB6010_REFCLK_19	52083	/* psec/clk @ 19.2 MHz CLKIN */
+
+#ifdef	CONFIG_ARCH_OMAP2
+
+extern int __init tusb6010_setup_interface(
+		struct musb_hdrc_platform_data *data,
+		unsigned ps_refclk, unsigned waitpin,
+		unsigned async_cs, unsigned sync_cs,
+		unsigned irq, unsigned dmachan);
+
+extern int tusb6010_platform_retime(unsigned is_refclk);
+
+#endif	/* OMAP2 */
+
+#endif /* __LINUX_USB_MUSB_H */