Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

16 files changed, 2869 insertions, 0 deletions

diff --git a/kernel/include/linux/mmc/boot.h b/kernel/include/linux/mmc/boot.h
new file mode 100644
index 000000000..23acc3baa
--- /dev/null
+++ b/kernel/include/linux/mmc/boot.h
@@ -0,0 +1,7 @@
+#ifndef LINUX_MMC_BOOT_H
+#define LINUX_MMC_BOOT_H
+
+enum { MMC_PROGRESS_ENTER, MMC_PROGRESS_INIT,
+       MMC_PROGRESS_LOAD, MMC_PROGRESS_DONE };
+
+#endif /* LINUX_MMC_BOOT_H */
diff --git a/kernel/include/linux/mmc/card.h b/kernel/include/linux/mmc/card.h
new file mode 100644
index 000000000..19f0175c0
--- /dev/null
+++ b/kernel/include/linux/mmc/card.h
@@ -0,0 +1,531 @@
+/*
+ *  linux/include/linux/mmc/card.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Card driver specific definitions.
+ */
+#ifndef LINUX_MMC_CARD_H
+#define LINUX_MMC_CARD_H
+
+#include <linux/device.h>
+#include <linux/mmc/core.h>
+#include <linux/mod_devicetable.h>
+
+struct mmc_cid {
+	unsigned int		manfid;
+	char			prod_name[8];
+	unsigned char		prv;
+	unsigned int		serial;
+	unsigned short		oemid;
+	unsigned short		year;
+	unsigned char		hwrev;
+	unsigned char		fwrev;
+	unsigned char		month;
+};
+
+struct mmc_csd {
+	unsigned char		structure;
+	unsigned char		mmca_vsn;
+	unsigned short		cmdclass;
+	unsigned short		tacc_clks;
+	unsigned int		tacc_ns;
+	unsigned int		c_size;
+	unsigned int		r2w_factor;
+	unsigned int		max_dtr;
+	unsigned int		erase_size;		/* In sectors */
+	unsigned int		read_blkbits;
+	unsigned int		write_blkbits;
+	unsigned int		capacity;
+	unsigned int		read_partial:1,
+				read_misalign:1,
+				write_partial:1,
+				write_misalign:1,
+				dsr_imp:1;
+};
+
+struct mmc_ext_csd {
+	u8			rev;
+	u8			erase_group_def;
+	u8			sec_feature_support;
+	u8			rel_sectors;
+	u8			rel_param;
+	u8			part_config;
+	u8			cache_ctrl;
+	u8			rst_n_function;
+	u8			max_packed_writes;
+	u8			max_packed_reads;
+	u8			packed_event_en;
+	unsigned int		part_time;		/* Units: ms */
+	unsigned int		sa_timeout;		/* Units: 100ns */
+	unsigned int		generic_cmd6_time;	/* Units: 10ms */
+	unsigned int            power_off_longtime;     /* Units: ms */
+	u8			power_off_notification;	/* state */
+	unsigned int		hs_max_dtr;
+	unsigned int		hs200_max_dtr;
+#define MMC_HIGH_26_MAX_DTR	26000000
+#define MMC_HIGH_52_MAX_DTR	52000000
+#define MMC_HIGH_DDR_MAX_DTR	52000000
+#define MMC_HS200_MAX_DTR	200000000
+	unsigned int		sectors;
+	unsigned int		hc_erase_size;		/* In sectors */
+	unsigned int		hc_erase_timeout;	/* In milliseconds */
+	unsigned int		sec_trim_mult;	/* Secure trim multiplier  */
+	unsigned int		sec_erase_mult;	/* Secure erase multiplier */
+	unsigned int		trim_timeout;		/* In milliseconds */
+	bool			partition_setting_completed;	/* enable bit */
+	unsigned long long	enhanced_area_offset;	/* Units: Byte */
+	unsigned int		enhanced_area_size;	/* Units: KB */
+	unsigned int		cache_size;		/* Units: KB */
+	bool			hpi_en;			/* HPI enablebit */
+	bool			hpi;			/* HPI support bit */
+	unsigned int		hpi_cmd;		/* cmd used as HPI */
+	bool			bkops;		/* background support bit */
+	bool			man_bkops_en;	/* manual bkops enable bit */
+	unsigned int            data_sector_size;       /* 512 bytes or 4KB */
+	unsigned int            data_tag_unit_size;     /* DATA TAG UNIT size */
+	unsigned int		boot_ro_lock;		/* ro lock support */
+	bool			boot_ro_lockable;
+	bool			ffu_capable;	/* Firmware upgrade support */
+#define MMC_FIRMWARE_LEN 8
+	u8			fwrev[MMC_FIRMWARE_LEN];  /* FW version */
+	u8			raw_exception_status;	/* 54 */
+	u8			raw_partition_support;	/* 160 */
+	u8			raw_rpmb_size_mult;	/* 168 */
+	u8			raw_erased_mem_count;	/* 181 */
+	u8			raw_ext_csd_structure;	/* 194 */
+	u8			raw_card_type;		/* 196 */
+	u8			out_of_int_time;	/* 198 */
+	u8			raw_pwr_cl_52_195;	/* 200 */
+	u8			raw_pwr_cl_26_195;	/* 201 */
+	u8			raw_pwr_cl_52_360;	/* 202 */
+	u8			raw_pwr_cl_26_360;	/* 203 */
+	u8			raw_s_a_timeout;	/* 217 */
+	u8			raw_hc_erase_gap_size;	/* 221 */
+	u8			raw_erase_timeout_mult;	/* 223 */
+	u8			raw_hc_erase_grp_size;	/* 224 */
+	u8			raw_sec_trim_mult;	/* 229 */
+	u8			raw_sec_erase_mult;	/* 230 */
+	u8			raw_sec_feature_support;/* 231 */
+	u8			raw_trim_mult;		/* 232 */
+	u8			raw_pwr_cl_200_195;	/* 236 */
+	u8			raw_pwr_cl_200_360;	/* 237 */
+	u8			raw_pwr_cl_ddr_52_195;	/* 238 */
+	u8			raw_pwr_cl_ddr_52_360;	/* 239 */
+	u8			raw_pwr_cl_ddr_200_360;	/* 253 */
+	u8			raw_bkops_status;	/* 246 */
+	u8			raw_sectors[4];		/* 212 - 4 bytes */
+
+	unsigned int            feature_support;
+#define MMC_DISCARD_FEATURE	BIT(0)                  /* CMD38 feature */
+};
+
+struct sd_scr {
+	unsigned char		sda_vsn;
+	unsigned char		sda_spec3;
+	unsigned char		bus_widths;
+#define SD_SCR_BUS_WIDTH_1	(1<<0)
+#define SD_SCR_BUS_WIDTH_4	(1<<2)
+	unsigned char		cmds;
+#define SD_SCR_CMD20_SUPPORT   (1<<0)
+#define SD_SCR_CMD23_SUPPORT   (1<<1)
+};
+
+struct sd_ssr {
+	unsigned int		au;			/* In sectors */
+	unsigned int		erase_timeout;		/* In milliseconds */
+	unsigned int		erase_offset;		/* In milliseconds */
+};
+
+struct sd_switch_caps {
+	unsigned int		hs_max_dtr;
+	unsigned int		uhs_max_dtr;
+#define HIGH_SPEED_MAX_DTR	50000000
+#define UHS_SDR104_MAX_DTR	208000000
+#define UHS_SDR50_MAX_DTR	100000000
+#define UHS_DDR50_MAX_DTR	50000000
+#define UHS_SDR25_MAX_DTR	UHS_DDR50_MAX_DTR
+#define UHS_SDR12_MAX_DTR	25000000
+	unsigned int		sd3_bus_mode;
+#define UHS_SDR12_BUS_SPEED	0
+#define HIGH_SPEED_BUS_SPEED	1
+#define UHS_SDR25_BUS_SPEED	1
+#define UHS_SDR50_BUS_SPEED	2
+#define UHS_SDR104_BUS_SPEED	3
+#define UHS_DDR50_BUS_SPEED	4
+
+#define SD_MODE_HIGH_SPEED	(1 << HIGH_SPEED_BUS_SPEED)
+#define SD_MODE_UHS_SDR12	(1 << UHS_SDR12_BUS_SPEED)
+#define SD_MODE_UHS_SDR25	(1 << UHS_SDR25_BUS_SPEED)
+#define SD_MODE_UHS_SDR50	(1 << UHS_SDR50_BUS_SPEED)
+#define SD_MODE_UHS_SDR104	(1 << UHS_SDR104_BUS_SPEED)
+#define SD_MODE_UHS_DDR50	(1 << UHS_DDR50_BUS_SPEED)
+	unsigned int		sd3_drv_type;
+#define SD_DRIVER_TYPE_B	0x01
+#define SD_DRIVER_TYPE_A	0x02
+#define SD_DRIVER_TYPE_C	0x04
+#define SD_DRIVER_TYPE_D	0x08
+	unsigned int		sd3_curr_limit;
+#define SD_SET_CURRENT_LIMIT_200	0
+#define SD_SET_CURRENT_LIMIT_400	1
+#define SD_SET_CURRENT_LIMIT_600	2
+#define SD_SET_CURRENT_LIMIT_800	3
+#define SD_SET_CURRENT_NO_CHANGE	(-1)
+
+#define SD_MAX_CURRENT_200	(1 << SD_SET_CURRENT_LIMIT_200)
+#define SD_MAX_CURRENT_400	(1 << SD_SET_CURRENT_LIMIT_400)
+#define SD_MAX_CURRENT_600	(1 << SD_SET_CURRENT_LIMIT_600)
+#define SD_MAX_CURRENT_800	(1 << SD_SET_CURRENT_LIMIT_800)
+};
+
+struct sdio_cccr {
+	unsigned int		sdio_vsn;
+	unsigned int		sd_vsn;
+	unsigned int		multi_block:1,
+				low_speed:1,
+				wide_bus:1,
+				high_power:1,
+				high_speed:1,
+				disable_cd:1;
+};
+
+struct sdio_cis {
+	unsigned short		vendor;
+	unsigned short		device;
+	unsigned short		blksize;
+	unsigned int		max_dtr;
+};
+
+struct mmc_host;
+struct mmc_ios;
+struct sdio_func;
+struct sdio_func_tuple;
+
+#define SDIO_MAX_FUNCS		7
+
+enum mmc_blk_status {
+	MMC_BLK_SUCCESS = 0,
+	MMC_BLK_PARTIAL,
+	MMC_BLK_CMD_ERR,
+	MMC_BLK_RETRY,
+	MMC_BLK_ABORT,
+	MMC_BLK_DATA_ERR,
+	MMC_BLK_ECC_ERR,
+	MMC_BLK_NOMEDIUM,
+	MMC_BLK_NEW_REQUEST,
+};
+
+/* The number of MMC physical partitions.  These consist of:
+ * boot partitions (2), general purpose partitions (4) and
+ * RPMB partition (1) in MMC v4.4.
+ */
+#define MMC_NUM_BOOT_PARTITION	2
+#define MMC_NUM_GP_PARTITION	4
+#define MMC_NUM_PHY_PARTITION	7
+#define MAX_MMC_PART_NAME_LEN	20
+
+/*
+ * MMC Physical partitions
+ */
+struct mmc_part {
+	unsigned int	size;	/* partition size (in bytes) */
+	unsigned int	part_cfg;	/* partition type */
+	char	name[MAX_MMC_PART_NAME_LEN];
+	bool	force_ro;	/* to make boot parts RO by default */
+	unsigned int	area_type;
+#define MMC_BLK_DATA_AREA_MAIN	(1<<0)
+#define MMC_BLK_DATA_AREA_BOOT	(1<<1)
+#define MMC_BLK_DATA_AREA_GP	(1<<2)
+#define MMC_BLK_DATA_AREA_RPMB	(1<<3)
+};
+
+/*
+ * MMC device
+ */
+struct mmc_card {
+	struct mmc_host		*host;		/* the host this device belongs to */
+	struct device		dev;		/* the device */
+	u32			ocr;		/* the current OCR setting */
+	unsigned int		rca;		/* relative card address of device */
+	unsigned int		type;		/* card type */
+#define MMC_TYPE_MMC		0		/* MMC card */
+#define MMC_TYPE_SD		1		/* SD card */
+#define MMC_TYPE_SDIO		2		/* SDIO card */
+#define MMC_TYPE_SD_COMBO	3		/* SD combo (IO+mem) card */
+	unsigned int		state;		/* (our) card state */
+#define MMC_STATE_PRESENT	(1<<0)		/* present in sysfs */
+#define MMC_STATE_READONLY	(1<<1)		/* card is read-only */
+#define MMC_STATE_BLOCKADDR	(1<<2)		/* card uses block-addressing */
+#define MMC_CARD_SDXC		(1<<3)		/* card is SDXC */
+#define MMC_CARD_REMOVED	(1<<4)		/* card has been removed */
+#define MMC_STATE_DOING_BKOPS	(1<<5)		/* card is doing BKOPS */
+#define MMC_STATE_SUSPENDED	(1<<6)		/* card is suspended */
+	unsigned int		quirks; 	/* card quirks */
+#define MMC_QUIRK_LENIENT_FN0	(1<<0)		/* allow SDIO FN0 writes outside of the VS CCCR range */
+#define MMC_QUIRK_BLKSZ_FOR_BYTE_MODE (1<<1)	/* use func->cur_blksize */
+						/* for byte mode */
+#define MMC_QUIRK_NONSTD_SDIO	(1<<2)		/* non-standard SDIO card attached */
+						/* (missing CIA registers) */
+#define MMC_QUIRK_BROKEN_CLK_GATING (1<<3)	/* clock gating the sdio bus will make card fail */
+#define MMC_QUIRK_NONSTD_FUNC_IF (1<<4)		/* SDIO card has nonstd function interfaces */
+#define MMC_QUIRK_DISABLE_CD	(1<<5)		/* disconnect CD/DAT[3] resistor */
+#define MMC_QUIRK_INAND_CMD38	(1<<6)		/* iNAND devices have broken CMD38 */
+#define MMC_QUIRK_BLK_NO_CMD23	(1<<7)		/* Avoid CMD23 for regular multiblock */
+#define MMC_QUIRK_BROKEN_BYTE_MODE_512 (1<<8)	/* Avoid sending 512 bytes in */
+						/* byte mode */
+#define MMC_QUIRK_LONG_READ_TIME (1<<9)		/* Data read time > CSD says */
+#define MMC_QUIRK_SEC_ERASE_TRIM_BROKEN (1<<10)	/* Skip secure for erase/trim */
+#define MMC_QUIRK_BROKEN_IRQ_POLLING	(1<<11)	/* Polling SDIO_CCCR_INTx could create a fake interrupt */
+
+	unsigned int		erase_size;	/* erase size in sectors */
+ 	unsigned int		erase_shift;	/* if erase unit is power 2 */
+ 	unsigned int		pref_erase;	/* in sectors */
+ 	u8			erased_byte;	/* value of erased bytes */
+
+	u32			raw_cid[4];	/* raw card CID */
+	u32			raw_csd[4];	/* raw card CSD */
+	u32			raw_scr[2];	/* raw card SCR */
+	struct mmc_cid		cid;		/* card identification */
+	struct mmc_csd		csd;		/* card specific */
+	struct mmc_ext_csd	ext_csd;	/* mmc v4 extended card specific */
+	struct sd_scr		scr;		/* extra SD information */
+	struct sd_ssr		ssr;		/* yet more SD information */
+	struct sd_switch_caps	sw_caps;	/* switch (CMD6) caps */
+
+	unsigned int		sdio_funcs;	/* number of SDIO functions */
+	struct sdio_cccr	cccr;		/* common card info */
+	struct sdio_cis		cis;		/* common tuple info */
+	struct sdio_func	*sdio_func[SDIO_MAX_FUNCS]; /* SDIO functions (devices) */
+	struct sdio_func	*sdio_single_irq; /* SDIO function when only one IRQ active */
+	unsigned		num_info;	/* number of info strings */
+	const char		**info;		/* info strings */
+	struct sdio_func_tuple	*tuples;	/* unknown common tuples */
+
+	unsigned int		sd_bus_speed;	/* Bus Speed Mode set for the card */
+	unsigned int		mmc_avail_type;	/* supported device type by both host and card */
+
+	struct dentry		*debugfs_root;
+	struct mmc_part	part[MMC_NUM_PHY_PARTITION]; /* physical partitions */
+	unsigned int    nr_parts;
+};
+
+/*
+ * This function fill contents in mmc_part.
+ */
+static inline void mmc_part_add(struct mmc_card *card, unsigned int size,
+			unsigned int part_cfg, char *name, int idx, bool ro,
+			int area_type)
+{
+	card->part[card->nr_parts].size = size;
+	card->part[card->nr_parts].part_cfg = part_cfg;
+	sprintf(card->part[card->nr_parts].name, name, idx);
+	card->part[card->nr_parts].force_ro = ro;
+	card->part[card->nr_parts].area_type = area_type;
+	card->nr_parts++;
+}
+
+static inline bool mmc_large_sector(struct mmc_card *card)
+{
+	return card->ext_csd.data_sector_size == 4096;
+}
+
+/*
+ *  The world is not perfect and supplies us with broken mmc/sdio devices.
+ *  For at least some of these bugs we need a work-around.
+ */
+
+struct mmc_fixup {
+	/* CID-specific fields. */
+	const char *name;
+
+	/* Valid revision range */
+	u64 rev_start, rev_end;
+
+	unsigned int manfid;
+	unsigned short oemid;
+
+	/* SDIO-specfic fields. You can use SDIO_ANY_ID here of course */
+	u16 cis_vendor, cis_device;
+
+	void (*vendor_fixup)(struct mmc_card *card, int data);
+	int data;
+};
+
+#define CID_MANFID_ANY (-1u)
+#define CID_OEMID_ANY ((unsigned short) -1)
+#define CID_NAME_ANY (NULL)
+
+#define END_FIXUP { NULL }
+
+#define _FIXUP_EXT(_name, _manfid, _oemid, _rev_start, _rev_end,	\
+		   _cis_vendor, _cis_device,				\
+		   _fixup, _data)					\
+	{						   \
+		.name = (_name),			   \
+		.manfid = (_manfid),			   \
+		.oemid = (_oemid),			   \
+		.rev_start = (_rev_start),		   \
+		.rev_end = (_rev_end),			   \
+		.cis_vendor = (_cis_vendor),		   \
+		.cis_device = (_cis_device),		   \
+		.vendor_fixup = (_fixup),		   \
+		.data = (_data),			   \
+	 }
+
+#define MMC_FIXUP_REV(_name, _manfid, _oemid, _rev_start, _rev_end,	\
+		      _fixup, _data)					\
+	_FIXUP_EXT(_name, _manfid,					\
+		   _oemid, _rev_start, _rev_end,			\
+		   SDIO_ANY_ID, SDIO_ANY_ID,				\
+		   _fixup, _data)					\
+
+#define MMC_FIXUP(_name, _manfid, _oemid, _fixup, _data) \
+	MMC_FIXUP_REV(_name, _manfid, _oemid, 0, -1ull, _fixup, _data)
+
+#define SDIO_FIXUP(_vendor, _device, _fixup, _data)			\
+	_FIXUP_EXT(CID_NAME_ANY, CID_MANFID_ANY,			\
+		    CID_OEMID_ANY, 0, -1ull,				\
+		   _vendor, _device,					\
+		   _fixup, _data)					\
+
+#define cid_rev(hwrev, fwrev, year, month)	\
+	(((u64) hwrev) << 40 |                  \
+	 ((u64) fwrev) << 32 |                  \
+	 ((u64) year) << 16 |                   \
+	 ((u64) month))
+
+#define cid_rev_card(card)		  \
+	cid_rev(card->cid.hwrev,	  \
+		    card->cid.fwrev,      \
+		    card->cid.year,	  \
+		    card->cid.month)
+
+/*
+ * Unconditionally quirk add/remove.
+ */
+
+static inline void __maybe_unused add_quirk(struct mmc_card *card, int data)
+{
+	card->quirks |= data;
+}
+
+static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data)
+{
+	card->quirks &= ~data;
+}
+
+#define mmc_card_mmc(c)		((c)->type == MMC_TYPE_MMC)
+#define mmc_card_sd(c)		((c)->type == MMC_TYPE_SD)
+#define mmc_card_sdio(c)	((c)->type == MMC_TYPE_SDIO)
+
+#define mmc_card_present(c)	((c)->state & MMC_STATE_PRESENT)
+#define mmc_card_readonly(c)	((c)->state & MMC_STATE_READONLY)
+#define mmc_card_blockaddr(c)	((c)->state & MMC_STATE_BLOCKADDR)
+#define mmc_card_ext_capacity(c) ((c)->state & MMC_CARD_SDXC)
+#define mmc_card_removed(c)	((c) && ((c)->state & MMC_CARD_REMOVED))
+#define mmc_card_doing_bkops(c)	((c)->state & MMC_STATE_DOING_BKOPS)
+#define mmc_card_suspended(c)	((c)->state & MMC_STATE_SUSPENDED)
+
+#define mmc_card_set_present(c)	((c)->state |= MMC_STATE_PRESENT)
+#define mmc_card_set_readonly(c) ((c)->state |= MMC_STATE_READONLY)
+#define mmc_card_set_blockaddr(c) ((c)->state |= MMC_STATE_BLOCKADDR)
+#define mmc_card_set_ext_capacity(c) ((c)->state |= MMC_CARD_SDXC)
+#define mmc_card_set_removed(c) ((c)->state |= MMC_CARD_REMOVED)
+#define mmc_card_set_doing_bkops(c)	((c)->state |= MMC_STATE_DOING_BKOPS)
+#define mmc_card_clr_doing_bkops(c)	((c)->state &= ~MMC_STATE_DOING_BKOPS)
+#define mmc_card_set_suspended(c) ((c)->state |= MMC_STATE_SUSPENDED)
+#define mmc_card_clr_suspended(c) ((c)->state &= ~MMC_STATE_SUSPENDED)
+
+/*
+ * Quirk add/remove for MMC products.
+ */
+
+static inline void __maybe_unused add_quirk_mmc(struct mmc_card *card, int data)
+{
+	if (mmc_card_mmc(card))
+		card->quirks |= data;
+}
+
+static inline void __maybe_unused remove_quirk_mmc(struct mmc_card *card,
+						   int data)
+{
+	if (mmc_card_mmc(card))
+		card->quirks &= ~data;
+}
+
+/*
+ * Quirk add/remove for SD products.
+ */
+
+static inline void __maybe_unused add_quirk_sd(struct mmc_card *card, int data)
+{
+	if (mmc_card_sd(card))
+		card->quirks |= data;
+}
+
+static inline void __maybe_unused remove_quirk_sd(struct mmc_card *card,
+						   int data)
+{
+	if (mmc_card_sd(card))
+		card->quirks &= ~data;
+}
+
+static inline int mmc_card_lenient_fn0(const struct mmc_card *c)
+{
+	return c->quirks & MMC_QUIRK_LENIENT_FN0;
+}
+
+static inline int mmc_blksz_for_byte_mode(const struct mmc_card *c)
+{
+	return c->quirks & MMC_QUIRK_BLKSZ_FOR_BYTE_MODE;
+}
+
+static inline int mmc_card_disable_cd(const struct mmc_card *c)
+{
+	return c->quirks & MMC_QUIRK_DISABLE_CD;
+}
+
+static inline int mmc_card_nonstd_func_interface(const struct mmc_card *c)
+{
+	return c->quirks & MMC_QUIRK_NONSTD_FUNC_IF;
+}
+
+static inline int mmc_card_broken_byte_mode_512(const struct mmc_card *c)
+{
+	return c->quirks & MMC_QUIRK_BROKEN_BYTE_MODE_512;
+}
+
+static inline int mmc_card_long_read_time(const struct mmc_card *c)
+{
+	return c->quirks & MMC_QUIRK_LONG_READ_TIME;
+}
+
+static inline int mmc_card_broken_irq_polling(const struct mmc_card *c)
+{
+	return c->quirks & MMC_QUIRK_BROKEN_IRQ_POLLING;
+}
+
+#define mmc_card_name(c)	((c)->cid.prod_name)
+#define mmc_card_id(c)		(dev_name(&(c)->dev))
+
+#define mmc_dev_to_card(d)	container_of(d, struct mmc_card, dev)
+
+/*
+ * MMC device driver (e.g., Flash card, I/O card...)
+ */
+struct mmc_driver {
+	struct device_driver drv;
+	int (*probe)(struct mmc_card *);
+	void (*remove)(struct mmc_card *);
+	void (*shutdown)(struct mmc_card *);
+};
+
+extern int mmc_register_driver(struct mmc_driver *);
+extern void mmc_unregister_driver(struct mmc_driver *);
+
+extern void mmc_fixup_device(struct mmc_card *card,
+			     const struct mmc_fixup *table);
+
+#endif /* LINUX_MMC_CARD_H */
diff --git a/kernel/include/linux/mmc/core.h b/kernel/include/linux/mmc/core.h
new file mode 100644
index 000000000..de722d4e9
--- /dev/null
+++ b/kernel/include/linux/mmc/core.h
@@ -0,0 +1,215 @@
+/*
+ *  linux/include/linux/mmc/core.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef LINUX_MMC_CORE_H
+#define LINUX_MMC_CORE_H
+
+#include <linux/interrupt.h>
+#include <linux/completion.h>
+
+struct request;
+struct mmc_data;
+struct mmc_request;
+
+struct mmc_command {
+	u32			opcode;
+	u32			arg;
+#define MMC_CMD23_ARG_REL_WR	(1 << 31)
+#define MMC_CMD23_ARG_PACKED	((0 << 31) | (1 << 30))
+#define MMC_CMD23_ARG_TAG_REQ	(1 << 29)
+	u32			resp[4];
+	unsigned int		flags;		/* expected response type */
+#define MMC_RSP_PRESENT	(1 << 0)
+#define MMC_RSP_136	(1 << 1)		/* 136 bit response */
+#define MMC_RSP_CRC	(1 << 2)		/* expect valid crc */
+#define MMC_RSP_BUSY	(1 << 3)		/* card may send busy */
+#define MMC_RSP_OPCODE	(1 << 4)		/* response contains opcode */
+
+#define MMC_CMD_MASK	(3 << 5)		/* non-SPI command type */
+#define MMC_CMD_AC	(0 << 5)
+#define MMC_CMD_ADTC	(1 << 5)
+#define MMC_CMD_BC	(2 << 5)
+#define MMC_CMD_BCR	(3 << 5)
+
+#define MMC_RSP_SPI_S1	(1 << 7)		/* one status byte */
+#define MMC_RSP_SPI_S2	(1 << 8)		/* second byte */
+#define MMC_RSP_SPI_B4	(1 << 9)		/* four data bytes */
+#define MMC_RSP_SPI_BUSY (1 << 10)		/* card may send busy */
+
+/*
+ * These are the native response types, and correspond to valid bit
+ * patterns of the above flags.  One additional valid pattern
+ * is all zeros, which means we don't expect a response.
+ */
+#define MMC_RSP_NONE	(0)
+#define MMC_RSP_R1	(MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
+#define MMC_RSP_R1B	(MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE|MMC_RSP_BUSY)
+#define MMC_RSP_R2	(MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC)
+#define MMC_RSP_R3	(MMC_RSP_PRESENT)
+#define MMC_RSP_R4	(MMC_RSP_PRESENT)
+#define MMC_RSP_R5	(MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
+#define MMC_RSP_R6	(MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
+#define MMC_RSP_R7	(MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
+
+#define mmc_resp_type(cmd)	((cmd)->flags & (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC|MMC_RSP_BUSY|MMC_RSP_OPCODE))
+
+/*
+ * These are the SPI response types for MMC, SD, and SDIO cards.
+ * Commands return R1, with maybe more info.  Zero is an error type;
+ * callers must always provide the appropriate MMC_RSP_SPI_Rx flags.
+ */
+#define MMC_RSP_SPI_R1	(MMC_RSP_SPI_S1)
+#define MMC_RSP_SPI_R1B	(MMC_RSP_SPI_S1|MMC_RSP_SPI_BUSY)
+#define MMC_RSP_SPI_R2	(MMC_RSP_SPI_S1|MMC_RSP_SPI_S2)
+#define MMC_RSP_SPI_R3	(MMC_RSP_SPI_S1|MMC_RSP_SPI_B4)
+#define MMC_RSP_SPI_R4	(MMC_RSP_SPI_S1|MMC_RSP_SPI_B4)
+#define MMC_RSP_SPI_R5	(MMC_RSP_SPI_S1|MMC_RSP_SPI_S2)
+#define MMC_RSP_SPI_R7	(MMC_RSP_SPI_S1|MMC_RSP_SPI_B4)
+
+#define mmc_spi_resp_type(cmd)	((cmd)->flags & \
+		(MMC_RSP_SPI_S1|MMC_RSP_SPI_BUSY|MMC_RSP_SPI_S2|MMC_RSP_SPI_B4))
+
+/*
+ * These are the command types.
+ */
+#define mmc_cmd_type(cmd)	((cmd)->flags & MMC_CMD_MASK)
+
+	unsigned int		retries;	/* max number of retries */
+	int			error;		/* command error */
+
+/*
+ * Standard errno values are used for errors, but some have specific
+ * meaning in the MMC layer:
+ *
+ * ETIMEDOUT    Card took too long to respond
+ * EILSEQ       Basic format problem with the received or sent data
+ *              (e.g. CRC check failed, incorrect opcode in response
+ *              or bad end bit)
+ * EINVAL       Request cannot be performed because of restrictions
+ *              in hardware and/or the driver
+ * ENOMEDIUM    Host can determine that the slot is empty and is
+ *              actively failing requests
+ */
+
+	unsigned int		busy_timeout;	/* busy detect timeout in ms */
+	/* Set this flag only for blocking sanitize request */
+	bool			sanitize_busy;
+
+	struct mmc_data		*data;		/* data segment associated with cmd */
+	struct mmc_request	*mrq;		/* associated request */
+};
+
+struct mmc_data {
+	unsigned int		timeout_ns;	/* data timeout (in ns, max 80ms) */
+	unsigned int		timeout_clks;	/* data timeout (in clocks) */
+	unsigned int		blksz;		/* data block size */
+	unsigned int		blocks;		/* number of blocks */
+	int			error;		/* data error */
+	unsigned int		flags;
+
+#define MMC_DATA_WRITE	(1 << 8)
+#define MMC_DATA_READ	(1 << 9)
+#define MMC_DATA_STREAM	(1 << 10)
+
+	unsigned int		bytes_xfered;
+
+	struct mmc_command	*stop;		/* stop command */
+	struct mmc_request	*mrq;		/* associated request */
+
+	unsigned int		sg_len;		/* size of scatter list */
+	struct scatterlist	*sg;		/* I/O scatter list */
+	s32			host_cookie;	/* host private data */
+};
+
+struct mmc_host;
+struct mmc_request {
+	struct mmc_command	*sbc;		/* SET_BLOCK_COUNT for multiblock */
+	struct mmc_command	*cmd;
+	struct mmc_data		*data;
+	struct mmc_command	*stop;
+
+	struct completion	completion;
+	void			(*done)(struct mmc_request *);/* completion function */
+	struct mmc_host		*host;
+};
+
+struct mmc_card;
+struct mmc_async_req;
+
+extern int mmc_stop_bkops(struct mmc_card *);
+extern int mmc_read_bkops_status(struct mmc_card *);
+extern struct mmc_async_req *mmc_start_req(struct mmc_host *,
+					   struct mmc_async_req *, int *);
+extern int mmc_interrupt_hpi(struct mmc_card *);
+extern void mmc_wait_for_req(struct mmc_host *, struct mmc_request *);
+extern int mmc_wait_for_cmd(struct mmc_host *, struct mmc_command *, int);
+extern int mmc_app_cmd(struct mmc_host *, struct mmc_card *);
+extern int mmc_wait_for_app_cmd(struct mmc_host *, struct mmc_card *,
+	struct mmc_command *, int);
+extern void mmc_start_bkops(struct mmc_card *card, bool from_exception);
+extern int __mmc_switch(struct mmc_card *, u8, u8, u8, unsigned int, bool,
+			bool, bool);
+extern int mmc_switch(struct mmc_card *, u8, u8, u8, unsigned int);
+extern int mmc_send_tuning(struct mmc_host *host);
+extern int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd);
+
+#define MMC_ERASE_ARG		0x00000000
+#define MMC_SECURE_ERASE_ARG	0x80000000
+#define MMC_TRIM_ARG		0x00000001
+#define MMC_DISCARD_ARG		0x00000003
+#define MMC_SECURE_TRIM1_ARG	0x80000001
+#define MMC_SECURE_TRIM2_ARG	0x80008000
+
+#define MMC_SECURE_ARGS		0x80000000
+#define MMC_TRIM_ARGS		0x00008001
+
+extern int mmc_erase(struct mmc_card *card, unsigned int from, unsigned int nr,
+		     unsigned int arg);
+extern int mmc_can_erase(struct mmc_card *card);
+extern int mmc_can_trim(struct mmc_card *card);
+extern int mmc_can_discard(struct mmc_card *card);
+extern int mmc_can_sanitize(struct mmc_card *card);
+extern int mmc_can_secure_erase_trim(struct mmc_card *card);
+extern int mmc_erase_group_aligned(struct mmc_card *card, unsigned int from,
+				   unsigned int nr);
+extern unsigned int mmc_calc_max_discard(struct mmc_card *card);
+
+extern int mmc_set_blocklen(struct mmc_card *card, unsigned int blocklen);
+extern int mmc_set_blockcount(struct mmc_card *card, unsigned int blockcount,
+			      bool is_rel_write);
+extern int mmc_hw_reset(struct mmc_host *host);
+extern int mmc_can_reset(struct mmc_card *card);
+
+extern void mmc_set_data_timeout(struct mmc_data *, const struct mmc_card *);
+extern unsigned int mmc_align_data_size(struct mmc_card *, unsigned int);
+
+extern int __mmc_claim_host(struct mmc_host *host, atomic_t *abort);
+extern void mmc_release_host(struct mmc_host *host);
+
+extern void mmc_get_card(struct mmc_card *card);
+extern void mmc_put_card(struct mmc_card *card);
+
+extern int mmc_flush_cache(struct mmc_card *);
+
+extern int mmc_detect_card_removed(struct mmc_host *host);
+
+/**
+ *	mmc_claim_host - exclusively claim a host
+ *	@host: mmc host to claim
+ *
+ *	Claim a host for a set of operations.
+ */
+static inline void mmc_claim_host(struct mmc_host *host)
+{
+	__mmc_claim_host(host, NULL);
+}
+
+struct device_node;
+extern u32 mmc_vddrange_to_ocrmask(int vdd_min, int vdd_max);
+extern int mmc_of_parse_voltage(struct device_node *np, u32 *mask);
+
+#endif /* LINUX_MMC_CORE_H */
diff --git a/kernel/include/linux/mmc/dw_mmc.h b/kernel/include/linux/mmc/dw_mmc.h
new file mode 100644
index 000000000..12111993a
--- /dev/null
+++ b/kernel/include/linux/mmc/dw_mmc.h
@@ -0,0 +1,271 @@
+/*
+ * Synopsys DesignWare Multimedia Card Interface driver
+ *  (Based on NXP driver for lpc 31xx)
+ *
+ * Copyright (C) 2009 NXP Semiconductors
+ * Copyright (C) 2009, 2010 Imagination Technologies Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef LINUX_MMC_DW_MMC_H
+#define LINUX_MMC_DW_MMC_H
+
+#include <linux/scatterlist.h>
+#include <linux/mmc/core.h>
+
+#define MAX_MCI_SLOTS	2
+
+enum dw_mci_state {
+	STATE_IDLE = 0,
+	STATE_SENDING_CMD,
+	STATE_SENDING_DATA,
+	STATE_DATA_BUSY,
+	STATE_SENDING_STOP,
+	STATE_DATA_ERROR,
+	STATE_SENDING_CMD11,
+	STATE_WAITING_CMD11_DONE,
+};
+
+enum {
+	EVENT_CMD_COMPLETE = 0,
+	EVENT_XFER_COMPLETE,
+	EVENT_DATA_COMPLETE,
+	EVENT_DATA_ERROR,
+	EVENT_XFER_ERROR
+};
+
+struct mmc_data;
+
+/**
+ * struct dw_mci - MMC controller state shared between all slots
+ * @lock: Spinlock protecting the queue and associated data.
+ * @regs: Pointer to MMIO registers.
+ * @fifo_reg: Pointer to MMIO registers for data FIFO
+ * @sg: Scatterlist entry currently being processed by PIO code, if any.
+ * @sg_miter: PIO mapping scatterlist iterator.
+ * @cur_slot: The slot which is currently using the controller.
+ * @mrq: The request currently being processed on @cur_slot,
+ *	or NULL if the controller is idle.
+ * @cmd: The command currently being sent to the card, or NULL.
+ * @data: The data currently being transferred, or NULL if no data
+ *	transfer is in progress.
+ * @use_dma: Whether DMA channel is initialized or not.
+ * @using_dma: Whether DMA is in use for the current transfer.
+ * @dma_64bit_address: Whether DMA supports 64-bit address mode or not.
+ * @sg_dma: Bus address of DMA buffer.
+ * @sg_cpu: Virtual address of DMA buffer.
+ * @dma_ops: Pointer to platform-specific DMA callbacks.
+ * @cmd_status: Snapshot of SR taken upon completion of the current
+ *	command. Only valid when EVENT_CMD_COMPLETE is pending.
+ * @data_status: Snapshot of SR taken upon completion of the current
+ *	data transfer. Only valid when EVENT_DATA_COMPLETE or
+ *	EVENT_DATA_ERROR is pending.
+ * @stop_cmdr: Value to be loaded into CMDR when the stop command is
+ *	to be sent.
+ * @dir_status: Direction of current transfer.
+ * @tasklet: Tasklet running the request state machine.
+ * @card_tasklet: Tasklet handling card detect.
+ * @pending_events: Bitmask of events flagged by the interrupt handler
+ *	to be processed by the tasklet.
+ * @completed_events: Bitmask of events which the state machine has
+ *	processed.
+ * @state: Tasklet state.
+ * @queue: List of slots waiting for access to the controller.
+ * @bus_hz: The rate of @mck in Hz. This forms the basis for MMC bus
+ *	rate and timeout calculations.
+ * @current_speed: Configured rate of the controller.
+ * @num_slots: Number of slots available.
+ * @verid: Denote Version ID.
+ * @dev: Device associated with the MMC controller.
+ * @pdata: Platform data associated with the MMC controller.
+ * @drv_data: Driver specific data for identified variant of the controller
+ * @priv: Implementation defined private data.
+ * @biu_clk: Pointer to bus interface unit clock instance.
+ * @ciu_clk: Pointer to card interface unit clock instance.
+ * @slot: Slots sharing this MMC controller.
+ * @fifo_depth: depth of FIFO.
+ * @data_shift: log2 of FIFO item size.
+ * @part_buf_start: Start index in part_buf.
+ * @part_buf_count: Bytes of partial data in part_buf.
+ * @part_buf: Simple buffer for partial fifo reads/writes.
+ * @push_data: Pointer to FIFO push function.
+ * @pull_data: Pointer to FIFO pull function.
+ * @quirks: Set of quirks that apply to specific versions of the IP.
+ * @irq_flags: The flags to be passed to request_irq.
+ * @irq: The irq value to be passed to request_irq.
+ * @sdio_id0: Number of slot0 in the SDIO interrupt registers.
+ *
+ * Locking
+ * =======
+ *
+ * @lock is a softirq-safe spinlock protecting @queue as well as
+ * @cur_slot, @mrq and @state. These must always be updated
+ * at the same time while holding @lock.
+ *
+ * @irq_lock is an irq-safe spinlock protecting the INTMASK register
+ * to allow the interrupt handler to modify it directly.  Held for only long
+ * enough to read-modify-write INTMASK and no other locks are grabbed when
+ * holding this one.
+ *
+ * The @mrq field of struct dw_mci_slot is also protected by @lock,
+ * and must always be written at the same time as the slot is added to
+ * @queue.
+ *
+ * @pending_events and @completed_events are accessed using atomic bit
+ * operations, so they don't need any locking.
+ *
+ * None of the fields touched by the interrupt handler need any
+ * locking. However, ordering is important: Before EVENT_DATA_ERROR or
+ * EVENT_DATA_COMPLETE is set in @pending_events, all data-related
+ * interrupts must be disabled and @data_status updated with a
+ * snapshot of SR. Similarly, before EVENT_CMD_COMPLETE is set, the
+ * CMDRDY interrupt must be disabled and @cmd_status updated with a
+ * snapshot of SR, and before EVENT_XFER_COMPLETE can be set, the
+ * bytes_xfered field of @data must be written. This is ensured by
+ * using barriers.
+ */
+struct dw_mci {
+	spinlock_t		lock;
+	spinlock_t		irq_lock;
+	void __iomem		*regs;
+	void __iomem		*fifo_reg;
+
+	struct scatterlist	*sg;
+	struct sg_mapping_iter	sg_miter;
+
+	struct dw_mci_slot	*cur_slot;
+	struct mmc_request	*mrq;
+	struct mmc_command	*cmd;
+	struct mmc_data		*data;
+	struct mmc_command	stop_abort;
+	unsigned int		prev_blksz;
+	unsigned char		timing;
+
+	/* DMA interface members*/
+	int			use_dma;
+	int			using_dma;
+	int			dma_64bit_address;
+
+	dma_addr_t		sg_dma;
+	void			*sg_cpu;
+	const struct dw_mci_dma_ops	*dma_ops;
+#ifdef CONFIG_MMC_DW_IDMAC
+	unsigned int		ring_size;
+#else
+	struct dw_mci_dma_data	*dma_data;
+#endif
+	u32			cmd_status;
+	u32			data_status;
+	u32			stop_cmdr;
+	u32			dir_status;
+	struct tasklet_struct	tasklet;
+	unsigned long		pending_events;
+	unsigned long		completed_events;
+	enum dw_mci_state	state;
+	struct list_head	queue;
+
+	u32			bus_hz;
+	u32			current_speed;
+	u32			num_slots;
+	u32			fifoth_val;
+	u16			verid;
+	struct device		*dev;
+	struct dw_mci_board	*pdata;
+	const struct dw_mci_drv_data	*drv_data;
+	void			*priv;
+	struct clk		*biu_clk;
+	struct clk		*ciu_clk;
+	struct dw_mci_slot	*slot[MAX_MCI_SLOTS];
+
+	/* FIFO push and pull */
+	int			fifo_depth;
+	int			data_shift;
+	u8			part_buf_start;
+	u8			part_buf_count;
+	union {
+		u16		part_buf16;
+		u32		part_buf32;
+		u64		part_buf;
+	};
+	void (*push_data)(struct dw_mci *host, void *buf, int cnt);
+	void (*pull_data)(struct dw_mci *host, void *buf, int cnt);
+
+	/* Workaround flags */
+	u32			quirks;
+
+	bool			vqmmc_enabled;
+	unsigned long		irq_flags; /* IRQ flags */
+	int			irq;
+
+	int			sdio_id0;
+
+	struct timer_list       cmd11_timer;
+};
+
+/* DMA ops for Internal/External DMAC interface */
+struct dw_mci_dma_ops {
+	/* DMA Ops */
+	int (*init)(struct dw_mci *host);
+	void (*start)(struct dw_mci *host, unsigned int sg_len);
+	void (*complete)(struct dw_mci *host);
+	void (*stop)(struct dw_mci *host);
+	void (*cleanup)(struct dw_mci *host);
+	void (*exit)(struct dw_mci *host);
+};
+
+/* IP Quirks/flags. */
+/* DTO fix for command transmission with IDMAC configured */
+#define DW_MCI_QUIRK_IDMAC_DTO			BIT(0)
+/* delay needed between retries on some 2.11a implementations */
+#define DW_MCI_QUIRK_RETRY_DELAY		BIT(1)
+/* High Speed Capable - Supports HS cards (up to 50MHz) */
+#define DW_MCI_QUIRK_HIGHSPEED			BIT(2)
+/* Unreliable card detection */
+#define DW_MCI_QUIRK_BROKEN_CARD_DETECTION	BIT(3)
+/* No write protect */
+#define DW_MCI_QUIRK_NO_WRITE_PROTECT		BIT(4)
+
+/* Slot level quirks */
+/* This slot has no write protect */
+#define DW_MCI_SLOT_QUIRK_NO_WRITE_PROTECT	BIT(0)
+
+struct dma_pdata;
+
+struct block_settings {
+	unsigned short	max_segs;	/* see blk_queue_max_segments */
+	unsigned int	max_blk_size;	/* maximum size of one mmc block */
+	unsigned int	max_blk_count;	/* maximum number of blocks in one req*/
+	unsigned int	max_req_size;	/* maximum number of bytes in one req*/
+	unsigned int	max_seg_size;	/* see blk_queue_max_segment_size */
+};
+
+/* Board platform data */
+struct dw_mci_board {
+	u32 num_slots;
+
+	u32 quirks; /* Workaround / Quirk flags */
+	unsigned int bus_hz; /* Clock speed at the cclk_in pad */
+
+	u32 caps;	/* Capabilities */
+	u32 caps2;	/* More capabilities */
+	u32 pm_caps;	/* PM capabilities */
+	/*
+	 * Override fifo depth. If 0, autodetect it from the FIFOTH register,
+	 * but note that this may not be reliable after a bootloader has used
+	 * it.
+	 */
+	unsigned int fifo_depth;
+
+	/* delay in mS before detecting cards after interrupt */
+	u32 detect_delay_ms;
+
+	struct dw_mci_dma_ops *dma_ops;
+	struct dma_pdata *data;
+	struct block_settings *blk_settings;
+};
+
+#endif /* LINUX_MMC_DW_MMC_H */
diff --git a/kernel/include/linux/mmc/host.h b/kernel/include/linux/mmc/host.h
new file mode 100644
index 000000000..b5bedaec6
--- /dev/null
+++ b/kernel/include/linux/mmc/host.h
@@ -0,0 +1,516 @@
+/*
+ *  linux/include/linux/mmc/host.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Host driver specific definitions.
+ */
+#ifndef LINUX_MMC_HOST_H
+#define LINUX_MMC_HOST_H
+
+#include <linux/leds.h>
+#include <linux/mutex.h>
+#include <linux/sched.h>
+#include <linux/device.h>
+#include <linux/fault-inject.h>
+
+#include <linux/mmc/core.h>
+#include <linux/mmc/card.h>
+#include <linux/mmc/pm.h>
+
+struct mmc_ios {
+	unsigned int	clock;			/* clock rate */
+	unsigned short	vdd;
+
+/* vdd stores the bit number of the selected voltage range from below. */
+
+	unsigned char	bus_mode;		/* command output mode */
+
+#define MMC_BUSMODE_OPENDRAIN	1
+#define MMC_BUSMODE_PUSHPULL	2
+
+	unsigned char	chip_select;		/* SPI chip select */
+
+#define MMC_CS_DONTCARE		0
+#define MMC_CS_HIGH		1
+#define MMC_CS_LOW		2
+
+	unsigned char	power_mode;		/* power supply mode */
+
+#define MMC_POWER_OFF		0
+#define MMC_POWER_UP		1
+#define MMC_POWER_ON		2
+#define MMC_POWER_UNDEFINED	3
+
+	unsigned char	bus_width;		/* data bus width */
+
+#define MMC_BUS_WIDTH_1		0
+#define MMC_BUS_WIDTH_4		2
+#define MMC_BUS_WIDTH_8		3
+
+	unsigned char	timing;			/* timing specification used */
+
+#define MMC_TIMING_LEGACY	0
+#define MMC_TIMING_MMC_HS	1
+#define MMC_TIMING_SD_HS	2
+#define MMC_TIMING_UHS_SDR12	3
+#define MMC_TIMING_UHS_SDR25	4
+#define MMC_TIMING_UHS_SDR50	5
+#define MMC_TIMING_UHS_SDR104	6
+#define MMC_TIMING_UHS_DDR50	7
+#define MMC_TIMING_MMC_DDR52	8
+#define MMC_TIMING_MMC_HS200	9
+#define MMC_TIMING_MMC_HS400	10
+
+	unsigned char	signal_voltage;		/* signalling voltage (1.8V or 3.3V) */
+
+#define MMC_SIGNAL_VOLTAGE_330	0
+#define MMC_SIGNAL_VOLTAGE_180	1
+#define MMC_SIGNAL_VOLTAGE_120	2
+
+	unsigned char	drv_type;		/* driver type (A, B, C, D) */
+
+#define MMC_SET_DRIVER_TYPE_B	0
+#define MMC_SET_DRIVER_TYPE_A	1
+#define MMC_SET_DRIVER_TYPE_C	2
+#define MMC_SET_DRIVER_TYPE_D	3
+};
+
+struct mmc_host_ops {
+	/*
+	 * It is optional for the host to implement pre_req and post_req in
+	 * order to support double buffering of requests (prepare one
+	 * request while another request is active).
+	 * pre_req() must always be followed by a post_req().
+	 * To undo a call made to pre_req(), call post_req() with
+	 * a nonzero err condition.
+	 */
+	void	(*post_req)(struct mmc_host *host, struct mmc_request *req,
+			    int err);
+	void	(*pre_req)(struct mmc_host *host, struct mmc_request *req,
+			   bool is_first_req);
+	void	(*request)(struct mmc_host *host, struct mmc_request *req);
+	/*
+	 * Avoid calling these three functions too often or in a "fast path",
+	 * since underlaying controller might implement them in an expensive
+	 * and/or slow way.
+	 *
+	 * Also note that these functions might sleep, so don't call them
+	 * in the atomic contexts!
+	 *
+	 * Return values for the get_ro callback should be:
+	 *   0 for a read/write card
+	 *   1 for a read-only card
+	 *   -ENOSYS when not supported (equal to NULL callback)
+	 *   or a negative errno value when something bad happened
+	 *
+	 * Return values for the get_cd callback should be:
+	 *   0 for a absent card
+	 *   1 for a present card
+	 *   -ENOSYS when not supported (equal to NULL callback)
+	 *   or a negative errno value when something bad happened
+	 */
+	void	(*set_ios)(struct mmc_host *host, struct mmc_ios *ios);
+	int	(*get_ro)(struct mmc_host *host);
+	int	(*get_cd)(struct mmc_host *host);
+
+	void	(*enable_sdio_irq)(struct mmc_host *host, int enable);
+
+	/* optional callback for HC quirks */
+	void	(*init_card)(struct mmc_host *host, struct mmc_card *card);
+
+	int	(*start_signal_voltage_switch)(struct mmc_host *host, struct mmc_ios *ios);
+
+	/* Check if the card is pulling dat[0:3] low */
+	int	(*card_busy)(struct mmc_host *host);
+
+	/* The tuning command opcode value is different for SD and eMMC cards */
+	int	(*execute_tuning)(struct mmc_host *host, u32 opcode);
+
+	/* Prepare HS400 target operating frequency depending host driver */
+	int	(*prepare_hs400_tuning)(struct mmc_host *host, struct mmc_ios *ios);
+	int	(*select_drive_strength)(unsigned int max_dtr, int host_drv, int card_drv);
+	void	(*hw_reset)(struct mmc_host *host);
+	void	(*card_event)(struct mmc_host *host);
+
+	/*
+	 * Optional callback to support controllers with HW issues for multiple
+	 * I/O. Returns the number of supported blocks for the request.
+	 */
+	int	(*multi_io_quirk)(struct mmc_card *card,
+				  unsigned int direction, int blk_size);
+};
+
+struct mmc_card;
+struct device;
+
+struct mmc_async_req {
+	/* active mmc request */
+	struct mmc_request	*mrq;
+	/*
+	 * Check error status of completed mmc request.
+	 * Returns 0 if success otherwise non zero.
+	 */
+	int (*err_check) (struct mmc_card *, struct mmc_async_req *);
+};
+
+/**
+ * struct mmc_slot - MMC slot functions
+ *
+ * @cd_irq:		MMC/SD-card slot hotplug detection IRQ or -EINVAL
+ * @handler_priv:	MMC/SD-card slot context
+ *
+ * Some MMC/SD host controllers implement slot-functions like card and
+ * write-protect detection natively. However, a large number of controllers
+ * leave these functions to the CPU. This struct provides a hook to attach
+ * such slot-function drivers.
+ */
+struct mmc_slot {
+	int cd_irq;
+	void *handler_priv;
+};
+
+/**
+ * mmc_context_info - synchronization details for mmc context
+ * @is_done_rcv		wake up reason was done request
+ * @is_new_req		wake up reason was new request
+ * @is_waiting_last_req	mmc context waiting for single running request
+ * @wait		wait queue
+ * @lock		lock to protect data fields
+ */
+struct mmc_context_info {
+	bool			is_done_rcv;
+	bool			is_new_req;
+	bool			is_waiting_last_req;
+	wait_queue_head_t	wait;
+	spinlock_t		lock;
+};
+
+struct regulator;
+struct mmc_pwrseq;
+
+struct mmc_supply {
+	struct regulator *vmmc;		/* Card power supply */
+	struct regulator *vqmmc;	/* Optional Vccq supply */
+};
+
+struct mmc_host {
+	struct device		*parent;
+	struct device		class_dev;
+	int			index;
+	const struct mmc_host_ops *ops;
+	struct mmc_pwrseq	*pwrseq;
+	unsigned int		f_min;
+	unsigned int		f_max;
+	unsigned int		f_init;
+	u32			ocr_avail;
+	u32			ocr_avail_sdio;	/* SDIO-specific OCR */
+	u32			ocr_avail_sd;	/* SD-specific OCR */
+	u32			ocr_avail_mmc;	/* MMC-specific OCR */
+	struct notifier_block	pm_notify;
+	u32			max_current_330;
+	u32			max_current_300;
+	u32			max_current_180;
+
+#define MMC_VDD_165_195		0x00000080	/* VDD voltage 1.65 - 1.95 */
+#define MMC_VDD_20_21		0x00000100	/* VDD voltage 2.0 ~ 2.1 */
+#define MMC_VDD_21_22		0x00000200	/* VDD voltage 2.1 ~ 2.2 */
+#define MMC_VDD_22_23		0x00000400	/* VDD voltage 2.2 ~ 2.3 */
+#define MMC_VDD_23_24		0x00000800	/* VDD voltage 2.3 ~ 2.4 */
+#define MMC_VDD_24_25		0x00001000	/* VDD voltage 2.4 ~ 2.5 */
+#define MMC_VDD_25_26		0x00002000	/* VDD voltage 2.5 ~ 2.6 */
+#define MMC_VDD_26_27		0x00004000	/* VDD voltage 2.6 ~ 2.7 */
+#define MMC_VDD_27_28		0x00008000	/* VDD voltage 2.7 ~ 2.8 */
+#define MMC_VDD_28_29		0x00010000	/* VDD voltage 2.8 ~ 2.9 */
+#define MMC_VDD_29_30		0x00020000	/* VDD voltage 2.9 ~ 3.0 */
+#define MMC_VDD_30_31		0x00040000	/* VDD voltage 3.0 ~ 3.1 */
+#define MMC_VDD_31_32		0x00080000	/* VDD voltage 3.1 ~ 3.2 */
+#define MMC_VDD_32_33		0x00100000	/* VDD voltage 3.2 ~ 3.3 */
+#define MMC_VDD_33_34		0x00200000	/* VDD voltage 3.3 ~ 3.4 */
+#define MMC_VDD_34_35		0x00400000	/* VDD voltage 3.4 ~ 3.5 */
+#define MMC_VDD_35_36		0x00800000	/* VDD voltage 3.5 ~ 3.6 */
+
+	u32			caps;		/* Host capabilities */
+
+#define MMC_CAP_4_BIT_DATA	(1 << 0)	/* Can the host do 4 bit transfers */
+#define MMC_CAP_MMC_HIGHSPEED	(1 << 1)	/* Can do MMC high-speed timing */
+#define MMC_CAP_SD_HIGHSPEED	(1 << 2)	/* Can do SD high-speed timing */
+#define MMC_CAP_SDIO_IRQ	(1 << 3)	/* Can signal pending SDIO IRQs */
+#define MMC_CAP_SPI		(1 << 4)	/* Talks only SPI protocols */
+#define MMC_CAP_NEEDS_POLL	(1 << 5)	/* Needs polling for card-detection */
+#define MMC_CAP_8_BIT_DATA	(1 << 6)	/* Can the host do 8 bit transfers */
+#define MMC_CAP_AGGRESSIVE_PM	(1 << 7)	/* Suspend (e)MMC/SD at idle  */
+#define MMC_CAP_NONREMOVABLE	(1 << 8)	/* Nonremovable e.g. eMMC */
+#define MMC_CAP_WAIT_WHILE_BUSY	(1 << 9)	/* Waits while card is busy */
+#define MMC_CAP_ERASE		(1 << 10)	/* Allow erase/trim commands */
+#define MMC_CAP_1_8V_DDR	(1 << 11)	/* can support */
+						/* DDR mode at 1.8V */
+#define MMC_CAP_1_2V_DDR	(1 << 12)	/* can support */
+						/* DDR mode at 1.2V */
+#define MMC_CAP_POWER_OFF_CARD	(1 << 13)	/* Can power off after boot */
+#define MMC_CAP_BUS_WIDTH_TEST	(1 << 14)	/* CMD14/CMD19 bus width ok */
+#define MMC_CAP_UHS_SDR12	(1 << 15)	/* Host supports UHS SDR12 mode */
+#define MMC_CAP_UHS_SDR25	(1 << 16)	/* Host supports UHS SDR25 mode */
+#define MMC_CAP_UHS_SDR50	(1 << 17)	/* Host supports UHS SDR50 mode */
+#define MMC_CAP_UHS_SDR104	(1 << 18)	/* Host supports UHS SDR104 mode */
+#define MMC_CAP_UHS_DDR50	(1 << 19)	/* Host supports UHS DDR50 mode */
+#define MMC_CAP_RUNTIME_RESUME	(1 << 20)	/* Resume at runtime_resume. */
+#define MMC_CAP_DRIVER_TYPE_A	(1 << 23)	/* Host supports Driver Type A */
+#define MMC_CAP_DRIVER_TYPE_C	(1 << 24)	/* Host supports Driver Type C */
+#define MMC_CAP_DRIVER_TYPE_D	(1 << 25)	/* Host supports Driver Type D */
+#define MMC_CAP_CMD23		(1 << 30)	/* CMD23 supported. */
+#define MMC_CAP_HW_RESET	(1 << 31)	/* Hardware reset */
+
+	u32			caps2;		/* More host capabilities */
+
+#define MMC_CAP2_BOOTPART_NOACC	(1 << 0)	/* Boot partition no access */
+#define MMC_CAP2_FULL_PWR_CYCLE	(1 << 2)	/* Can do full power cycle */
+#define MMC_CAP2_HS200_1_8V_SDR	(1 << 5)        /* can support */
+#define MMC_CAP2_HS200_1_2V_SDR	(1 << 6)        /* can support */
+#define MMC_CAP2_HS200		(MMC_CAP2_HS200_1_8V_SDR | \
+				 MMC_CAP2_HS200_1_2V_SDR)
+#define MMC_CAP2_HC_ERASE_SZ	(1 << 9)	/* High-capacity erase size */
+#define MMC_CAP2_CD_ACTIVE_HIGH	(1 << 10)	/* Card-detect signal active high */
+#define MMC_CAP2_RO_ACTIVE_HIGH	(1 << 11)	/* Write-protect signal active high */
+#define MMC_CAP2_PACKED_RD	(1 << 12)	/* Allow packed read */
+#define MMC_CAP2_PACKED_WR	(1 << 13)	/* Allow packed write */
+#define MMC_CAP2_PACKED_CMD	(MMC_CAP2_PACKED_RD | \
+				 MMC_CAP2_PACKED_WR)
+#define MMC_CAP2_NO_PRESCAN_POWERUP (1 << 14)	/* Don't power up before scan */
+#define MMC_CAP2_HS400_1_8V	(1 << 15)	/* Can support HS400 1.8V */
+#define MMC_CAP2_HS400_1_2V	(1 << 16)	/* Can support HS400 1.2V */
+#define MMC_CAP2_HS400		(MMC_CAP2_HS400_1_8V | \
+				 MMC_CAP2_HS400_1_2V)
+#define MMC_CAP2_HSX00_1_2V	(MMC_CAP2_HS200_1_2V_SDR | MMC_CAP2_HS400_1_2V)
+#define MMC_CAP2_SDIO_IRQ_NOTHREAD (1 << 17)
+
+	mmc_pm_flag_t		pm_caps;	/* supported pm features */
+
+#ifdef CONFIG_MMC_CLKGATE
+	int			clk_requests;	/* internal reference counter */
+	unsigned int		clk_delay;	/* number of MCI clk hold cycles */
+	bool			clk_gated;	/* clock gated */
+	struct delayed_work	clk_gate_work; /* delayed clock gate */
+	unsigned int		clk_old;	/* old clock value cache */
+	spinlock_t		clk_lock;	/* lock for clk fields */
+	struct mutex		clk_gate_mutex;	/* mutex for clock gating */
+	struct device_attribute clkgate_delay_attr;
+	unsigned long           clkgate_delay;
+#endif
+
+	/* host specific block data */
+	unsigned int		max_seg_size;	/* see blk_queue_max_segment_size */
+	unsigned short		max_segs;	/* see blk_queue_max_segments */
+	unsigned short		unused;
+	unsigned int		max_req_size;	/* maximum number of bytes in one req */
+	unsigned int		max_blk_size;	/* maximum size of one mmc block */
+	unsigned int		max_blk_count;	/* maximum number of blocks in one req */
+	unsigned int		max_busy_timeout; /* max busy timeout in ms */
+
+	/* private data */
+	spinlock_t		lock;		/* lock for claim and bus ops */
+
+	struct mmc_ios		ios;		/* current io bus settings */
+
+	/* group bitfields together to minimize padding */
+	unsigned int		use_spi_crc:1;
+	unsigned int		claimed:1;	/* host exclusively claimed */
+	unsigned int		bus_dead:1;	/* bus has been released */
+#ifdef CONFIG_MMC_DEBUG
+	unsigned int		removed:1;	/* host is being removed */
+#endif
+
+	int			rescan_disable;	/* disable card detection */
+	int			rescan_entered;	/* used with nonremovable devices */
+
+	bool			trigger_card_event; /* card_event necessary */
+
+	struct mmc_card		*card;		/* device attached to this host */
+
+	wait_queue_head_t	wq;
+	struct task_struct	*claimer;	/* task that has host claimed */
+	int			claim_cnt;	/* "claim" nesting count */
+
+	struct delayed_work	detect;
+	int			detect_change;	/* card detect flag */
+	struct mmc_slot		slot;
+
+	const struct mmc_bus_ops *bus_ops;	/* current bus driver */
+	unsigned int		bus_refs;	/* reference counter */
+
+	unsigned int		sdio_irqs;
+	struct task_struct	*sdio_irq_thread;
+	bool			sdio_irq_pending;
+	atomic_t		sdio_irq_thread_abort;
+
+	mmc_pm_flag_t		pm_flags;	/* requested pm features */
+
+	struct led_trigger	*led;		/* activity led */
+
+#ifdef CONFIG_REGULATOR
+	bool			regulator_enabled; /* regulator state */
+#endif
+	struct mmc_supply	supply;
+
+	struct dentry		*debugfs_root;
+
+	struct mmc_async_req	*areq;		/* active async req */
+	struct mmc_context_info	context_info;	/* async synchronization info */
+
+#ifdef CONFIG_FAIL_MMC_REQUEST
+	struct fault_attr	fail_mmc_request;
+#endif
+
+	unsigned int		actual_clock;	/* Actual HC clock rate */
+
+	unsigned int		slotno;	/* used for sdio acpi binding */
+
+	int			dsr_req;	/* DSR value is valid */
+	u32			dsr;	/* optional driver stage (DSR) value */
+
+	unsigned long		private[0] ____cacheline_aligned;
+};
+
+struct mmc_host *mmc_alloc_host(int extra, struct device *);
+int mmc_add_host(struct mmc_host *);
+void mmc_remove_host(struct mmc_host *);
+void mmc_free_host(struct mmc_host *);
+int mmc_of_parse(struct mmc_host *host);
+
+static inline void *mmc_priv(struct mmc_host *host)
+{
+	return (void *)host->private;
+}
+
+#define mmc_host_is_spi(host)	((host)->caps & MMC_CAP_SPI)
+
+#define mmc_dev(x)	((x)->parent)
+#define mmc_classdev(x)	(&(x)->class_dev)
+#define mmc_hostname(x)	(dev_name(&(x)->class_dev))
+
+int mmc_power_save_host(struct mmc_host *host);
+int mmc_power_restore_host(struct mmc_host *host);
+
+void mmc_detect_change(struct mmc_host *, unsigned long delay);
+void mmc_request_done(struct mmc_host *, struct mmc_request *);
+
+static inline void mmc_signal_sdio_irq(struct mmc_host *host)
+{
+	host->ops->enable_sdio_irq(host, 0);
+	host->sdio_irq_pending = true;
+	wake_up_process(host->sdio_irq_thread);
+}
+
+void sdio_run_irqs(struct mmc_host *host);
+
+#ifdef CONFIG_REGULATOR
+int mmc_regulator_get_ocrmask(struct regulator *supply);
+int mmc_regulator_set_ocr(struct mmc_host *mmc,
+			struct regulator *supply,
+			unsigned short vdd_bit);
+#else
+static inline int mmc_regulator_get_ocrmask(struct regulator *supply)
+{
+	return 0;
+}
+
+static inline int mmc_regulator_set_ocr(struct mmc_host *mmc,
+				 struct regulator *supply,
+				 unsigned short vdd_bit)
+{
+	return 0;
+}
+#endif
+
+int mmc_regulator_get_supply(struct mmc_host *mmc);
+
+int mmc_pm_notify(struct notifier_block *notify_block, unsigned long, void *);
+
+static inline int mmc_card_is_removable(struct mmc_host *host)
+{
+	return !(host->caps & MMC_CAP_NONREMOVABLE);
+}
+
+static inline int mmc_card_keep_power(struct mmc_host *host)
+{
+	return host->pm_flags & MMC_PM_KEEP_POWER;
+}
+
+static inline int mmc_card_wake_sdio_irq(struct mmc_host *host)
+{
+	return host->pm_flags & MMC_PM_WAKE_SDIO_IRQ;
+}
+
+static inline int mmc_host_cmd23(struct mmc_host *host)
+{
+	return host->caps & MMC_CAP_CMD23;
+}
+
+static inline int mmc_boot_partition_access(struct mmc_host *host)
+{
+	return !(host->caps2 & MMC_CAP2_BOOTPART_NOACC);
+}
+
+static inline int mmc_host_uhs(struct mmc_host *host)
+{
+	return host->caps &
+		(MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25 |
+		 MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR104 |
+		 MMC_CAP_UHS_DDR50);
+}
+
+static inline int mmc_host_packed_wr(struct mmc_host *host)
+{
+	return host->caps2 & MMC_CAP2_PACKED_WR;
+}
+
+#ifdef CONFIG_MMC_CLKGATE
+void mmc_host_clk_hold(struct mmc_host *host);
+void mmc_host_clk_release(struct mmc_host *host);
+unsigned int mmc_host_clk_rate(struct mmc_host *host);
+
+#else
+static inline void mmc_host_clk_hold(struct mmc_host *host)
+{
+}
+
+static inline void mmc_host_clk_release(struct mmc_host *host)
+{
+}
+
+static inline unsigned int mmc_host_clk_rate(struct mmc_host *host)
+{
+	return host->ios.clock;
+}
+#endif
+
+static inline int mmc_card_hs(struct mmc_card *card)
+{
+	return card->host->ios.timing == MMC_TIMING_SD_HS ||
+		card->host->ios.timing == MMC_TIMING_MMC_HS;
+}
+
+static inline int mmc_card_uhs(struct mmc_card *card)
+{
+	return card->host->ios.timing >= MMC_TIMING_UHS_SDR12 &&
+		card->host->ios.timing <= MMC_TIMING_UHS_DDR50;
+}
+
+static inline bool mmc_card_hs200(struct mmc_card *card)
+{
+	return card->host->ios.timing == MMC_TIMING_MMC_HS200;
+}
+
+static inline bool mmc_card_ddr52(struct mmc_card *card)
+{
+	return card->host->ios.timing == MMC_TIMING_MMC_DDR52;
+}
+
+static inline bool mmc_card_hs400(struct mmc_card *card)
+{
+	return card->host->ios.timing == MMC_TIMING_MMC_HS400;
+}
+
+#endif /* LINUX_MMC_HOST_H */
diff --git a/kernel/include/linux/mmc/mmc.h b/kernel/include/linux/mmc/mmc.h
new file mode 100644
index 000000000..124f56211
--- /dev/null
+++ b/kernel/include/linux/mmc/mmc.h
@@ -0,0 +1,444 @@
+/*
+ * Header for MultiMediaCard (MMC)
+ *
+ * Copyright 2002 Hewlett-Packard Company
+ *
+ * Use consistent with the GNU GPL is permitted,
+ * provided that this copyright notice is
+ * preserved in its entirety in all copies and derived works.
+ *
+ * HEWLETT-PACKARD COMPANY MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
+ * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
+ * FITNESS FOR ANY PARTICULAR PURPOSE.
+ *
+ * Many thanks to Alessandro Rubini and Jonathan Corbet!
+ *
+ * Based strongly on code by:
+ *
+ * Author: Yong-iL Joh <tolkien@mizi.com>
+ *
+ * Author:  Andrew Christian
+ *          15 May 2002
+ */
+
+#ifndef LINUX_MMC_MMC_H
+#define LINUX_MMC_MMC_H
+
+/* Standard MMC commands (4.1)           type  argument     response */
+   /* class 1 */
+#define MMC_GO_IDLE_STATE         0   /* bc                          */
+#define MMC_SEND_OP_COND          1   /* bcr  [31:0] OCR         R3  */
+#define MMC_ALL_SEND_CID          2   /* bcr                     R2  */
+#define MMC_SET_RELATIVE_ADDR     3   /* ac   [31:16] RCA        R1  */
+#define MMC_SET_DSR               4   /* bc   [31:16] RCA            */
+#define MMC_SLEEP_AWAKE		  5   /* ac   [31:16] RCA 15:flg R1b */
+#define MMC_SWITCH                6   /* ac   [31:0] See below   R1b */
+#define MMC_SELECT_CARD           7   /* ac   [31:16] RCA        R1  */
+#define MMC_SEND_EXT_CSD          8   /* adtc                    R1  */
+#define MMC_SEND_CSD              9   /* ac   [31:16] RCA        R2  */
+#define MMC_SEND_CID             10   /* ac   [31:16] RCA        R2  */
+#define MMC_READ_DAT_UNTIL_STOP  11   /* adtc [31:0] dadr        R1  */
+#define MMC_STOP_TRANSMISSION    12   /* ac                      R1b */
+#define MMC_SEND_STATUS          13   /* ac   [31:16] RCA        R1  */
+#define MMC_BUS_TEST_R           14   /* adtc                    R1  */
+#define MMC_GO_INACTIVE_STATE    15   /* ac   [31:16] RCA            */
+#define MMC_BUS_TEST_W           19   /* adtc                    R1  */
+#define MMC_SPI_READ_OCR         58   /* spi                  spi_R3 */
+#define MMC_SPI_CRC_ON_OFF       59   /* spi  [0:0] flag      spi_R1 */
+
+  /* class 2 */
+#define MMC_SET_BLOCKLEN         16   /* ac   [31:0] block len   R1  */
+#define MMC_READ_SINGLE_BLOCK    17   /* adtc [31:0] data addr   R1  */
+#define MMC_READ_MULTIPLE_BLOCK  18   /* adtc [31:0] data addr   R1  */
+#define MMC_SEND_TUNING_BLOCK    19   /* adtc                    R1  */
+#define MMC_SEND_TUNING_BLOCK_HS200	21	/* adtc R1  */
+
+  /* class 3 */
+#define MMC_WRITE_DAT_UNTIL_STOP 20   /* adtc [31:0] data addr   R1  */
+
+  /* class 4 */
+#define MMC_SET_BLOCK_COUNT      23   /* adtc [31:0] data addr   R1  */
+#define MMC_WRITE_BLOCK          24   /* adtc [31:0] data addr   R1  */
+#define MMC_WRITE_MULTIPLE_BLOCK 25   /* adtc                    R1  */
+#define MMC_PROGRAM_CID          26   /* adtc                    R1  */
+#define MMC_PROGRAM_CSD          27   /* adtc                    R1  */
+
+  /* class 6 */
+#define MMC_SET_WRITE_PROT       28   /* ac   [31:0] data addr   R1b */
+#define MMC_CLR_WRITE_PROT       29   /* ac   [31:0] data addr   R1b */
+#define MMC_SEND_WRITE_PROT      30   /* adtc [31:0] wpdata addr R1  */
+
+  /* class 5 */
+#define MMC_ERASE_GROUP_START    35   /* ac   [31:0] data addr   R1  */
+#define MMC_ERASE_GROUP_END      36   /* ac   [31:0] data addr   R1  */
+#define MMC_ERASE                38   /* ac                      R1b */
+
+  /* class 9 */
+#define MMC_FAST_IO              39   /* ac   <Complex>          R4  */
+#define MMC_GO_IRQ_STATE         40   /* bcr                     R5  */
+
+  /* class 7 */
+#define MMC_LOCK_UNLOCK          42   /* adtc                    R1b */
+
+  /* class 8 */
+#define MMC_APP_CMD              55   /* ac   [31:16] RCA        R1  */
+#define MMC_GEN_CMD              56   /* adtc [0] RD/WR          R1  */
+
+static inline bool mmc_op_multi(u32 opcode)
+{
+	return opcode == MMC_WRITE_MULTIPLE_BLOCK ||
+	       opcode == MMC_READ_MULTIPLE_BLOCK;
+}
+
+/*
+ * MMC_SWITCH argument format:
+ *
+ *	[31:26] Always 0
+ *	[25:24] Access Mode
+ *	[23:16] Location of target Byte in EXT_CSD
+ *	[15:08] Value Byte
+ *	[07:03] Always 0
+ *	[02:00] Command Set
+ */
+
+/*
+  MMC status in R1, for native mode (SPI bits are different)
+  Type
+	e : error bit
+	s : status bit
+	r : detected and set for the actual command response
+	x : detected and set during command execution. the host must poll
+            the card by sending status command in order to read these bits.
+  Clear condition
+	a : according to the card state
+	b : always related to the previous command. Reception of
+            a valid command will clear it (with a delay of one command)
+	c : clear by read
+ */
+
+#define R1_OUT_OF_RANGE		(1 << 31)	/* er, c */
+#define R1_ADDRESS_ERROR	(1 << 30)	/* erx, c */
+#define R1_BLOCK_LEN_ERROR	(1 << 29)	/* er, c */
+#define R1_ERASE_SEQ_ERROR      (1 << 28)	/* er, c */
+#define R1_ERASE_PARAM		(1 << 27)	/* ex, c */
+#define R1_WP_VIOLATION		(1 << 26)	/* erx, c */
+#define R1_CARD_IS_LOCKED	(1 << 25)	/* sx, a */
+#define R1_LOCK_UNLOCK_FAILED	(1 << 24)	/* erx, c */
+#define R1_COM_CRC_ERROR	(1 << 23)	/* er, b */
+#define R1_ILLEGAL_COMMAND	(1 << 22)	/* er, b */
+#define R1_CARD_ECC_FAILED	(1 << 21)	/* ex, c */
+#define R1_CC_ERROR		(1 << 20)	/* erx, c */
+#define R1_ERROR		(1 << 19)	/* erx, c */
+#define R1_UNDERRUN		(1 << 18)	/* ex, c */
+#define R1_OVERRUN		(1 << 17)	/* ex, c */
+#define R1_CID_CSD_OVERWRITE	(1 << 16)	/* erx, c, CID/CSD overwrite */
+#define R1_WP_ERASE_SKIP	(1 << 15)	/* sx, c */
+#define R1_CARD_ECC_DISABLED	(1 << 14)	/* sx, a */
+#define R1_ERASE_RESET		(1 << 13)	/* sr, c */
+#define R1_STATUS(x)            (x & 0xFFFFE000)
+#define R1_CURRENT_STATE(x)	((x & 0x00001E00) >> 9)	/* sx, b (4 bits) */
+#define R1_READY_FOR_DATA	(1 << 8)	/* sx, a */
+#define R1_SWITCH_ERROR		(1 << 7)	/* sx, c */
+#define R1_EXCEPTION_EVENT	(1 << 6)	/* sr, a */
+#define R1_APP_CMD		(1 << 5)	/* sr, c */
+
+#define R1_STATE_IDLE	0
+#define R1_STATE_READY	1
+#define R1_STATE_IDENT	2
+#define R1_STATE_STBY	3
+#define R1_STATE_TRAN	4
+#define R1_STATE_DATA	5
+#define R1_STATE_RCV	6
+#define R1_STATE_PRG	7
+#define R1_STATE_DIS	8
+
+/*
+ * MMC/SD in SPI mode reports R1 status always, and R2 for SEND_STATUS
+ * R1 is the low order byte; R2 is the next highest byte, when present.
+ */
+#define R1_SPI_IDLE		(1 << 0)
+#define R1_SPI_ERASE_RESET	(1 << 1)
+#define R1_SPI_ILLEGAL_COMMAND	(1 << 2)
+#define R1_SPI_COM_CRC		(1 << 3)
+#define R1_SPI_ERASE_SEQ	(1 << 4)
+#define R1_SPI_ADDRESS		(1 << 5)
+#define R1_SPI_PARAMETER	(1 << 6)
+/* R1 bit 7 is always zero */
+#define R2_SPI_CARD_LOCKED	(1 << 8)
+#define R2_SPI_WP_ERASE_SKIP	(1 << 9)	/* or lock/unlock fail */
+#define R2_SPI_LOCK_UNLOCK_FAIL	R2_SPI_WP_ERASE_SKIP
+#define R2_SPI_ERROR		(1 << 10)
+#define R2_SPI_CC_ERROR		(1 << 11)
+#define R2_SPI_CARD_ECC_ERROR	(1 << 12)
+#define R2_SPI_WP_VIOLATION	(1 << 13)
+#define R2_SPI_ERASE_PARAM	(1 << 14)
+#define R2_SPI_OUT_OF_RANGE	(1 << 15)	/* or CSD overwrite */
+#define R2_SPI_CSD_OVERWRITE	R2_SPI_OUT_OF_RANGE
+
+/* These are unpacked versions of the actual responses */
+
+struct _mmc_csd {
+	u8  csd_structure;
+	u8  spec_vers;
+	u8  taac;
+	u8  nsac;
+	u8  tran_speed;
+	u16 ccc;
+	u8  read_bl_len;
+	u8  read_bl_partial;
+	u8  write_blk_misalign;
+	u8  read_blk_misalign;
+	u8  dsr_imp;
+	u16 c_size;
+	u8  vdd_r_curr_min;
+	u8  vdd_r_curr_max;
+	u8  vdd_w_curr_min;
+	u8  vdd_w_curr_max;
+	u8  c_size_mult;
+	union {
+		struct { /* MMC system specification version 3.1 */
+			u8  erase_grp_size;
+			u8  erase_grp_mult;
+		} v31;
+		struct { /* MMC system specification version 2.2 */
+			u8  sector_size;
+			u8  erase_grp_size;
+		} v22;
+	} erase;
+	u8  wp_grp_size;
+	u8  wp_grp_enable;
+	u8  default_ecc;
+	u8  r2w_factor;
+	u8  write_bl_len;
+	u8  write_bl_partial;
+	u8  file_format_grp;
+	u8  copy;
+	u8  perm_write_protect;
+	u8  tmp_write_protect;
+	u8  file_format;
+	u8  ecc;
+};
+
+/*
+ * OCR bits are mostly in host.h
+ */
+#define MMC_CARD_BUSY	0x80000000	/* Card Power up status bit */
+
+/*
+ * Card Command Classes (CCC)
+ */
+#define CCC_BASIC		(1<<0)	/* (0) Basic protocol functions */
+					/* (CMD0,1,2,3,4,7,9,10,12,13,15) */
+					/* (and for SPI, CMD58,59) */
+#define CCC_STREAM_READ		(1<<1)	/* (1) Stream read commands */
+					/* (CMD11) */
+#define CCC_BLOCK_READ		(1<<2)	/* (2) Block read commands */
+					/* (CMD16,17,18) */
+#define CCC_STREAM_WRITE	(1<<3)	/* (3) Stream write commands */
+					/* (CMD20) */
+#define CCC_BLOCK_WRITE		(1<<4)	/* (4) Block write commands */
+					/* (CMD16,24,25,26,27) */
+#define CCC_ERASE		(1<<5)	/* (5) Ability to erase blocks */
+					/* (CMD32,33,34,35,36,37,38,39) */
+#define CCC_WRITE_PROT		(1<<6)	/* (6) Able to write protect blocks */
+					/* (CMD28,29,30) */
+#define CCC_LOCK_CARD		(1<<7)	/* (7) Able to lock down card */
+					/* (CMD16,CMD42) */
+#define CCC_APP_SPEC		(1<<8)	/* (8) Application specific */
+					/* (CMD55,56,57,ACMD*) */
+#define CCC_IO_MODE		(1<<9)	/* (9) I/O mode */
+					/* (CMD5,39,40,52,53) */
+#define CCC_SWITCH		(1<<10)	/* (10) High speed switch */
+					/* (CMD6,34,35,36,37,50) */
+					/* (11) Reserved */
+					/* (CMD?) */
+
+/*
+ * CSD field definitions
+ */
+
+#define CSD_STRUCT_VER_1_0  0           /* Valid for system specification 1.0 - 1.2 */
+#define CSD_STRUCT_VER_1_1  1           /* Valid for system specification 1.4 - 2.2 */
+#define CSD_STRUCT_VER_1_2  2           /* Valid for system specification 3.1 - 3.2 - 3.31 - 4.0 - 4.1 */
+#define CSD_STRUCT_EXT_CSD  3           /* Version is coded in CSD_STRUCTURE in EXT_CSD */
+
+#define CSD_SPEC_VER_0      0           /* Implements system specification 1.0 - 1.2 */
+#define CSD_SPEC_VER_1      1           /* Implements system specification 1.4 */
+#define CSD_SPEC_VER_2      2           /* Implements system specification 2.0 - 2.2 */
+#define CSD_SPEC_VER_3      3           /* Implements system specification 3.1 - 3.2 - 3.31 */
+#define CSD_SPEC_VER_4      4           /* Implements system specification 4.0 - 4.1 */
+
+/*
+ * EXT_CSD fields
+ */
+
+#define EXT_CSD_FLUSH_CACHE		32      /* W */
+#define EXT_CSD_CACHE_CTRL		33      /* R/W */
+#define EXT_CSD_POWER_OFF_NOTIFICATION	34	/* R/W */
+#define EXT_CSD_PACKED_FAILURE_INDEX	35	/* RO */
+#define EXT_CSD_PACKED_CMD_STATUS	36	/* RO */
+#define EXT_CSD_EXP_EVENTS_STATUS	54	/* RO, 2 bytes */
+#define EXT_CSD_EXP_EVENTS_CTRL		56	/* R/W, 2 bytes */
+#define EXT_CSD_DATA_SECTOR_SIZE	61	/* R */
+#define EXT_CSD_GP_SIZE_MULT		143	/* R/W */
+#define EXT_CSD_PARTITION_SETTING_COMPLETED 155	/* R/W */
+#define EXT_CSD_PARTITION_ATTRIBUTE	156	/* R/W */
+#define EXT_CSD_PARTITION_SUPPORT	160	/* RO */
+#define EXT_CSD_HPI_MGMT		161	/* R/W */
+#define EXT_CSD_RST_N_FUNCTION		162	/* R/W */
+#define EXT_CSD_BKOPS_EN		163	/* R/W */
+#define EXT_CSD_BKOPS_START		164	/* W */
+#define EXT_CSD_SANITIZE_START		165     /* W */
+#define EXT_CSD_WR_REL_PARAM		166	/* RO */
+#define EXT_CSD_RPMB_MULT		168	/* RO */
+#define EXT_CSD_FW_CONFIG		169	/* R/W */
+#define EXT_CSD_BOOT_WP			173	/* R/W */
+#define EXT_CSD_ERASE_GROUP_DEF		175	/* R/W */
+#define EXT_CSD_PART_CONFIG		179	/* R/W */
+#define EXT_CSD_ERASED_MEM_CONT		181	/* RO */
+#define EXT_CSD_BUS_WIDTH		183	/* R/W */
+#define EXT_CSD_HS_TIMING		185	/* R/W */
+#define EXT_CSD_POWER_CLASS		187	/* R/W */
+#define EXT_CSD_REV			192	/* RO */
+#define EXT_CSD_STRUCTURE		194	/* RO */
+#define EXT_CSD_CARD_TYPE		196	/* RO */
+#define EXT_CSD_OUT_OF_INTERRUPT_TIME	198	/* RO */
+#define EXT_CSD_PART_SWITCH_TIME        199     /* RO */
+#define EXT_CSD_PWR_CL_52_195		200	/* RO */
+#define EXT_CSD_PWR_CL_26_195		201	/* RO */
+#define EXT_CSD_PWR_CL_52_360		202	/* RO */
+#define EXT_CSD_PWR_CL_26_360		203	/* RO */
+#define EXT_CSD_SEC_CNT			212	/* RO, 4 bytes */
+#define EXT_CSD_S_A_TIMEOUT		217	/* RO */
+#define EXT_CSD_REL_WR_SEC_C		222	/* RO */
+#define EXT_CSD_HC_WP_GRP_SIZE		221	/* RO */
+#define EXT_CSD_ERASE_TIMEOUT_MULT	223	/* RO */
+#define EXT_CSD_HC_ERASE_GRP_SIZE	224	/* RO */
+#define EXT_CSD_BOOT_MULT		226	/* RO */
+#define EXT_CSD_SEC_TRIM_MULT		229	/* RO */
+#define EXT_CSD_SEC_ERASE_MULT		230	/* RO */
+#define EXT_CSD_SEC_FEATURE_SUPPORT	231	/* RO */
+#define EXT_CSD_TRIM_MULT		232	/* RO */
+#define EXT_CSD_PWR_CL_200_195		236	/* RO */
+#define EXT_CSD_PWR_CL_200_360		237	/* RO */
+#define EXT_CSD_PWR_CL_DDR_52_195	238	/* RO */
+#define EXT_CSD_PWR_CL_DDR_52_360	239	/* RO */
+#define EXT_CSD_BKOPS_STATUS		246	/* RO */
+#define EXT_CSD_POWER_OFF_LONG_TIME	247	/* RO */
+#define EXT_CSD_GENERIC_CMD6_TIME	248	/* RO */
+#define EXT_CSD_CACHE_SIZE		249	/* RO, 4 bytes */
+#define EXT_CSD_PWR_CL_DDR_200_360	253	/* RO */
+#define EXT_CSD_FIRMWARE_VERSION	254	/* RO, 8 bytes */
+#define EXT_CSD_SUPPORTED_MODE		493	/* RO */
+#define EXT_CSD_TAG_UNIT_SIZE		498	/* RO */
+#define EXT_CSD_DATA_TAG_SUPPORT	499	/* RO */
+#define EXT_CSD_MAX_PACKED_WRITES	500	/* RO */
+#define EXT_CSD_MAX_PACKED_READS	501	/* RO */
+#define EXT_CSD_BKOPS_SUPPORT		502	/* RO */
+#define EXT_CSD_HPI_FEATURES		503	/* RO */
+
+/*
+ * EXT_CSD field definitions
+ */
+
+#define EXT_CSD_WR_REL_PARAM_EN		(1<<2)
+
+#define EXT_CSD_BOOT_WP_B_PWR_WP_DIS	(0x40)
+#define EXT_CSD_BOOT_WP_B_PERM_WP_DIS	(0x10)
+#define EXT_CSD_BOOT_WP_B_PERM_WP_EN	(0x04)
+#define EXT_CSD_BOOT_WP_B_PWR_WP_EN	(0x01)
+
+#define EXT_CSD_PART_CONFIG_ACC_MASK	(0x7)
+#define EXT_CSD_PART_CONFIG_ACC_BOOT0	(0x1)
+#define EXT_CSD_PART_CONFIG_ACC_RPMB	(0x3)
+#define EXT_CSD_PART_CONFIG_ACC_GP0	(0x4)
+
+#define EXT_CSD_PART_SETTING_COMPLETED	(0x1)
+#define EXT_CSD_PART_SUPPORT_PART_EN	(0x1)
+
+#define EXT_CSD_CMD_SET_NORMAL		(1<<0)
+#define EXT_CSD_CMD_SET_SECURE		(1<<1)
+#define EXT_CSD_CMD_SET_CPSECURE	(1<<2)
+
+#define EXT_CSD_CARD_TYPE_HS_26	(1<<0)	/* Card can run at 26MHz */
+#define EXT_CSD_CARD_TYPE_HS_52	(1<<1)	/* Card can run at 52MHz */
+#define EXT_CSD_CARD_TYPE_HS	(EXT_CSD_CARD_TYPE_HS_26 | \
+				 EXT_CSD_CARD_TYPE_HS_52)
+#define EXT_CSD_CARD_TYPE_DDR_1_8V  (1<<2)   /* Card can run at 52MHz */
+					     /* DDR mode @1.8V or 3V I/O */
+#define EXT_CSD_CARD_TYPE_DDR_1_2V  (1<<3)   /* Card can run at 52MHz */
+					     /* DDR mode @1.2V I/O */
+#define EXT_CSD_CARD_TYPE_DDR_52       (EXT_CSD_CARD_TYPE_DDR_1_8V  \
+					| EXT_CSD_CARD_TYPE_DDR_1_2V)
+#define EXT_CSD_CARD_TYPE_HS200_1_8V	(1<<4)	/* Card can run at 200MHz */
+#define EXT_CSD_CARD_TYPE_HS200_1_2V	(1<<5)	/* Card can run at 200MHz */
+						/* SDR mode @1.2V I/O */
+#define EXT_CSD_CARD_TYPE_HS200		(EXT_CSD_CARD_TYPE_HS200_1_8V | \
+					 EXT_CSD_CARD_TYPE_HS200_1_2V)
+#define EXT_CSD_CARD_TYPE_HS400_1_8V	(1<<6)	/* Card can run at 200MHz DDR, 1.8V */
+#define EXT_CSD_CARD_TYPE_HS400_1_2V	(1<<7)	/* Card can run at 200MHz DDR, 1.2V */
+#define EXT_CSD_CARD_TYPE_HS400		(EXT_CSD_CARD_TYPE_HS400_1_8V | \
+					 EXT_CSD_CARD_TYPE_HS400_1_2V)
+
+#define EXT_CSD_BUS_WIDTH_1	0	/* Card is in 1 bit mode */
+#define EXT_CSD_BUS_WIDTH_4	1	/* Card is in 4 bit mode */
+#define EXT_CSD_BUS_WIDTH_8	2	/* Card is in 8 bit mode */
+#define EXT_CSD_DDR_BUS_WIDTH_4	5	/* Card is in 4 bit DDR mode */
+#define EXT_CSD_DDR_BUS_WIDTH_8	6	/* Card is in 8 bit DDR mode */
+
+#define EXT_CSD_TIMING_BC	0	/* Backwards compatility */
+#define EXT_CSD_TIMING_HS	1	/* High speed */
+#define EXT_CSD_TIMING_HS200	2	/* HS200 */
+#define EXT_CSD_TIMING_HS400	3	/* HS400 */
+
+#define EXT_CSD_SEC_ER_EN	BIT(0)
+#define EXT_CSD_SEC_BD_BLK_EN	BIT(2)
+#define EXT_CSD_SEC_GB_CL_EN	BIT(4)
+#define EXT_CSD_SEC_SANITIZE	BIT(6)  /* v4.5 only */
+
+#define EXT_CSD_RST_N_EN_MASK	0x3
+#define EXT_CSD_RST_N_ENABLED	1	/* RST_n is enabled on card */
+
+#define EXT_CSD_NO_POWER_NOTIFICATION	0
+#define EXT_CSD_POWER_ON		1
+#define EXT_CSD_POWER_OFF_SHORT		2
+#define EXT_CSD_POWER_OFF_LONG		3
+
+#define EXT_CSD_PWR_CL_8BIT_MASK	0xF0	/* 8 bit PWR CLS */
+#define EXT_CSD_PWR_CL_4BIT_MASK	0x0F	/* 8 bit PWR CLS */
+#define EXT_CSD_PWR_CL_8BIT_SHIFT	4
+#define EXT_CSD_PWR_CL_4BIT_SHIFT	0
+
+#define EXT_CSD_PACKED_EVENT_EN	BIT(3)
+
+/*
+ * EXCEPTION_EVENT_STATUS field
+ */
+#define EXT_CSD_URGENT_BKOPS		BIT(0)
+#define EXT_CSD_DYNCAP_NEEDED		BIT(1)
+#define EXT_CSD_SYSPOOL_EXHAUSTED	BIT(2)
+#define EXT_CSD_PACKED_FAILURE		BIT(3)
+
+#define EXT_CSD_PACKED_GENERIC_ERROR	BIT(0)
+#define EXT_CSD_PACKED_INDEXED_ERROR	BIT(1)
+
+/*
+ * BKOPS status level
+ */
+#define EXT_CSD_BKOPS_LEVEL_2		0x2
+
+/*
+ * BKOPS modes
+ */
+#define EXT_CSD_MANUAL_BKOPS_MASK	0x01
+
+/*
+ * MMC_SWITCH access modes
+ */
+
+#define MMC_SWITCH_MODE_CMD_SET		0x00	/* Change the command set */
+#define MMC_SWITCH_MODE_SET_BITS	0x01	/* Set bits which are 1 in value */
+#define MMC_SWITCH_MODE_CLEAR_BITS	0x02	/* Clear bits which are 1 in value */
+#define MMC_SWITCH_MODE_WRITE_BYTE	0x03	/* Set target to value */
+
+#endif /* LINUX_MMC_MMC_H */
diff --git a/kernel/include/linux/mmc/pm.h b/kernel/include/linux/mmc/pm.h
new file mode 100644
index 000000000..4a139204c
--- /dev/null
+++ b/kernel/include/linux/mmc/pm.h
@@ -0,0 +1,30 @@
+/*
+ * linux/include/linux/mmc/pm.h
+ *
+ * Author:	Nicolas Pitre
+ * Copyright:	(C) 2009 Marvell Technology Group Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef LINUX_MMC_PM_H
+#define LINUX_MMC_PM_H
+
+/*
+ * These flags are used to describe power management features that
+ * some cards (typically SDIO cards) might wish to benefit from when
+ * the host system is being suspended.  There are several layers of
+ * abstractions involved, from the host controller driver, to the MMC core
+ * code, to the SDIO core code, to finally get to the actual SDIO function
+ * driver.  This file is therefore used for common definitions shared across
+ * all those layers.
+ */
+
+typedef unsigned int mmc_pm_flag_t;
+
+#define MMC_PM_KEEP_POWER	(1 << 0)	/* preserve card power during suspend */
+#define MMC_PM_WAKE_SDIO_IRQ	(1 << 1)	/* wake up host system on SDIO IRQ assertion */
+
+#endif /* LINUX_MMC_PM_H */
diff --git a/kernel/include/linux/mmc/sd.h b/kernel/include/linux/mmc/sd.h
new file mode 100644
index 000000000..1ebcf9ba1
--- /dev/null
+++ b/kernel/include/linux/mmc/sd.h
@@ -0,0 +1,94 @@
+/*
+ *  include/linux/mmc/sd.h
+ *
+ *  Copyright (C) 2005-2007 Pierre Ossman, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#ifndef LINUX_MMC_SD_H
+#define LINUX_MMC_SD_H
+
+/* SD commands                           type  argument     response */
+  /* class 0 */
+/* This is basically the same command as for MMC with some quirks. */
+#define SD_SEND_RELATIVE_ADDR     3   /* bcr                     R6  */
+#define SD_SEND_IF_COND           8   /* bcr  [11:0] See below   R7  */
+#define SD_SWITCH_VOLTAGE         11  /* ac                      R1  */
+
+  /* class 10 */
+#define SD_SWITCH                 6   /* adtc [31:0] See below   R1  */
+
+  /* class 5 */
+#define SD_ERASE_WR_BLK_START    32   /* ac   [31:0] data addr   R1  */
+#define SD_ERASE_WR_BLK_END      33   /* ac   [31:0] data addr   R1  */
+
+  /* Application commands */
+#define SD_APP_SET_BUS_WIDTH      6   /* ac   [1:0] bus width    R1  */
+#define SD_APP_SD_STATUS         13   /* adtc                    R1  */
+#define SD_APP_SEND_NUM_WR_BLKS  22   /* adtc                    R1  */
+#define SD_APP_OP_COND           41   /* bcr  [31:0] OCR         R3  */
+#define SD_APP_SEND_SCR          51   /* adtc                    R1  */
+
+/* OCR bit definitions */
+#define SD_OCR_S18R		(1 << 24)    /* 1.8V switching request */
+#define SD_ROCR_S18A		SD_OCR_S18R  /* 1.8V switching accepted by card */
+#define SD_OCR_XPC		(1 << 28)    /* SDXC power control */
+#define SD_OCR_CCS		(1 << 30)    /* Card Capacity Status */
+
+/*
+ * SD_SWITCH argument format:
+ *
+ *      [31] Check (0) or switch (1)
+ *      [30:24] Reserved (0)
+ *      [23:20] Function group 6
+ *      [19:16] Function group 5
+ *      [15:12] Function group 4
+ *      [11:8] Function group 3
+ *      [7:4] Function group 2
+ *      [3:0] Function group 1
+ */
+
+/*
+ * SD_SEND_IF_COND argument format:
+ *
+ *	[31:12] Reserved (0)
+ *	[11:8] Host Voltage Supply Flags
+ *	[7:0] Check Pattern (0xAA)
+ */
+
+/*
+ * SCR field definitions
+ */
+
+#define SCR_SPEC_VER_0		0	/* Implements system specification 1.0 - 1.01 */
+#define SCR_SPEC_VER_1		1	/* Implements system specification 1.10 */
+#define SCR_SPEC_VER_2		2	/* Implements system specification 2.00-3.0X */
+
+/*
+ * SD bus widths
+ */
+#define SD_BUS_WIDTH_1		0
+#define SD_BUS_WIDTH_4		2
+
+/*
+ * SD_SWITCH mode
+ */
+#define SD_SWITCH_CHECK		0
+#define SD_SWITCH_SET		1
+
+/*
+ * SD_SWITCH function groups
+ */
+#define SD_SWITCH_GRP_ACCESS	0
+
+/*
+ * SD_SWITCH access modes
+ */
+#define SD_SWITCH_ACCESS_DEF	0
+#define SD_SWITCH_ACCESS_HS	1
+
+#endif /* LINUX_MMC_SD_H */
diff --git a/kernel/include/linux/mmc/sdhci-pci-data.h b/kernel/include/linux/mmc/sdhci-pci-data.h
new file mode 100644
index 000000000..8959604a1
--- /dev/null
+++ b/kernel/include/linux/mmc/sdhci-pci-data.h
@@ -0,0 +1,18 @@
+#ifndef LINUX_MMC_SDHCI_PCI_DATA_H
+#define LINUX_MMC_SDHCI_PCI_DATA_H
+
+struct pci_dev;
+
+struct sdhci_pci_data {
+	struct pci_dev	*pdev;
+	int		slotno;
+	int		rst_n_gpio; /* Set to -EINVAL if unused */
+	int		cd_gpio;    /* Set to -EINVAL if unused */
+	int		(*setup)(struct sdhci_pci_data *data);
+	void		(*cleanup)(struct sdhci_pci_data *data);
+};
+
+extern struct sdhci_pci_data *(*sdhci_pci_get_data)(struct pci_dev *pdev,
+				int slotno);
+
+#endif
diff --git a/kernel/include/linux/mmc/sdio.h b/kernel/include/linux/mmc/sdio.h
new file mode 100644
index 000000000..17446d3c3
--- /dev/null
+++ b/kernel/include/linux/mmc/sdio.h
@@ -0,0 +1,193 @@
+/*
+ *  include/linux/mmc/sdio.h
+ *
+ *  Copyright 2006-2007 Pierre Ossman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#ifndef LINUX_MMC_SDIO_H
+#define LINUX_MMC_SDIO_H
+
+/* SDIO commands                         type  argument     response */
+#define SD_IO_SEND_OP_COND          5 /* bcr  [23:0] OCR         R4  */
+#define SD_IO_RW_DIRECT            52 /* ac   [31:0] See below   R5  */
+#define SD_IO_RW_EXTENDED          53 /* adtc [31:0] See below   R5  */
+
+/*
+ * SD_IO_RW_DIRECT argument format:
+ *
+ *      [31] R/W flag
+ *      [30:28] Function number
+ *      [27] RAW flag
+ *      [25:9] Register address
+ *      [7:0] Data
+ */
+
+/*
+ * SD_IO_RW_EXTENDED argument format:
+ *
+ *      [31] R/W flag
+ *      [30:28] Function number
+ *      [27] Block mode
+ *      [26] Increment address
+ *      [25:9] Register address
+ *      [8:0] Byte/block count
+ */
+
+#define R4_18V_PRESENT (1<<24)
+#define R4_MEMORY_PRESENT (1 << 27)
+
+/*
+  SDIO status in R5
+  Type
+	e : error bit
+	s : status bit
+	r : detected and set for the actual command response
+	x : detected and set during command execution. the host must poll
+            the card by sending status command in order to read these bits.
+  Clear condition
+	a : according to the card state
+	b : always related to the previous command. Reception of
+            a valid command will clear it (with a delay of one command)
+	c : clear by read
+ */
+
+#define R5_COM_CRC_ERROR	(1 << 15)	/* er, b */
+#define R5_ILLEGAL_COMMAND	(1 << 14)	/* er, b */
+#define R5_ERROR		(1 << 11)	/* erx, c */
+#define R5_FUNCTION_NUMBER	(1 << 9)	/* er, c */
+#define R5_OUT_OF_RANGE		(1 << 8)	/* er, c */
+#define R5_STATUS(x)		(x & 0xCB00)
+#define R5_IO_CURRENT_STATE(x)	((x & 0x3000) >> 12) /* s, b */
+
+/*
+ * Card Common Control Registers (CCCR)
+ */
+
+#define SDIO_CCCR_CCCR		0x00
+
+#define  SDIO_CCCR_REV_1_00	0	/* CCCR/FBR Version 1.00 */
+#define  SDIO_CCCR_REV_1_10	1	/* CCCR/FBR Version 1.10 */
+#define  SDIO_CCCR_REV_1_20	2	/* CCCR/FBR Version 1.20 */
+#define  SDIO_CCCR_REV_3_00	3	/* CCCR/FBR Version 3.00 */
+
+#define  SDIO_SDIO_REV_1_00	0	/* SDIO Spec Version 1.00 */
+#define  SDIO_SDIO_REV_1_10	1	/* SDIO Spec Version 1.10 */
+#define  SDIO_SDIO_REV_1_20	2	/* SDIO Spec Version 1.20 */
+#define  SDIO_SDIO_REV_2_00	3	/* SDIO Spec Version 2.00 */
+#define  SDIO_SDIO_REV_3_00	4	/* SDIO Spec Version 3.00 */
+
+#define SDIO_CCCR_SD		0x01
+
+#define  SDIO_SD_REV_1_01	0	/* SD Physical Spec Version 1.01 */
+#define  SDIO_SD_REV_1_10	1	/* SD Physical Spec Version 1.10 */
+#define  SDIO_SD_REV_2_00	2	/* SD Physical Spec Version 2.00 */
+#define  SDIO_SD_REV_3_00	3	/* SD Physical Spev Version 3.00 */
+
+#define SDIO_CCCR_IOEx		0x02
+#define SDIO_CCCR_IORx		0x03
+
+#define SDIO_CCCR_IENx		0x04	/* Function/Master Interrupt Enable */
+#define SDIO_CCCR_INTx		0x05	/* Function Interrupt Pending */
+
+#define SDIO_CCCR_ABORT		0x06	/* function abort/card reset */
+
+#define SDIO_CCCR_IF		0x07	/* bus interface controls */
+
+#define  SDIO_BUS_WIDTH_MASK	0x03	/* data bus width setting */
+#define  SDIO_BUS_WIDTH_1BIT	0x00
+#define  SDIO_BUS_WIDTH_RESERVED 0x01
+#define  SDIO_BUS_WIDTH_4BIT	0x02
+#define  SDIO_BUS_ECSI		0x20	/* Enable continuous SPI interrupt */
+#define  SDIO_BUS_SCSI		0x40	/* Support continuous SPI interrupt */
+
+#define  SDIO_BUS_ASYNC_INT	0x20
+
+#define  SDIO_BUS_CD_DISABLE     0x80	/* disable pull-up on DAT3 (pin 1) */
+
+#define SDIO_CCCR_CAPS		0x08
+
+#define  SDIO_CCCR_CAP_SDC	0x01	/* can do CMD52 while data transfer */
+#define  SDIO_CCCR_CAP_SMB	0x02	/* can do multi-block xfers (CMD53) */
+#define  SDIO_CCCR_CAP_SRW	0x04	/* supports read-wait protocol */
+#define  SDIO_CCCR_CAP_SBS	0x08	/* supports suspend/resume */
+#define  SDIO_CCCR_CAP_S4MI	0x10	/* interrupt during 4-bit CMD53 */
+#define  SDIO_CCCR_CAP_E4MI	0x20	/* enable ints during 4-bit CMD53 */
+#define  SDIO_CCCR_CAP_LSC	0x40	/* low speed card */
+#define  SDIO_CCCR_CAP_4BLS	0x80	/* 4 bit low speed card */
+
+#define SDIO_CCCR_CIS		0x09	/* common CIS pointer (3 bytes) */
+
+/* Following 4 regs are valid only if SBS is set */
+#define SDIO_CCCR_SUSPEND	0x0c
+#define SDIO_CCCR_SELx		0x0d
+#define SDIO_CCCR_EXECx		0x0e
+#define SDIO_CCCR_READYx	0x0f
+
+#define SDIO_CCCR_BLKSIZE	0x10
+
+#define SDIO_CCCR_POWER		0x12
+
+#define  SDIO_POWER_SMPC	0x01	/* Supports Master Power Control */
+#define  SDIO_POWER_EMPC	0x02	/* Enable Master Power Control */
+
+#define SDIO_CCCR_SPEED		0x13
+
+#define  SDIO_SPEED_SHS		0x01	/* Supports High-Speed mode */
+#define  SDIO_SPEED_BSS_SHIFT	1
+#define  SDIO_SPEED_BSS_MASK	(7<<SDIO_SPEED_BSS_SHIFT)
+#define  SDIO_SPEED_SDR12	(0<<SDIO_SPEED_BSS_SHIFT)
+#define  SDIO_SPEED_SDR25	(1<<SDIO_SPEED_BSS_SHIFT)
+#define  SDIO_SPEED_SDR50	(2<<SDIO_SPEED_BSS_SHIFT)
+#define  SDIO_SPEED_SDR104	(3<<SDIO_SPEED_BSS_SHIFT)
+#define  SDIO_SPEED_DDR50	(4<<SDIO_SPEED_BSS_SHIFT)
+#define  SDIO_SPEED_EHS		SDIO_SPEED_SDR25	/* Enable High-Speed */
+
+#define SDIO_CCCR_UHS		0x14
+#define  SDIO_UHS_SDR50		0x01
+#define  SDIO_UHS_SDR104	0x02
+#define  SDIO_UHS_DDR50		0x04
+
+#define SDIO_CCCR_DRIVE_STRENGTH 0x15
+#define  SDIO_SDTx_MASK		0x07
+#define  SDIO_DRIVE_SDTA	(1<<0)
+#define  SDIO_DRIVE_SDTC	(1<<1)
+#define  SDIO_DRIVE_SDTD	(1<<2)
+#define  SDIO_DRIVE_DTSx_MASK	0x03
+#define  SDIO_DRIVE_DTSx_SHIFT	4
+#define  SDIO_DTSx_SET_TYPE_B	(0 << SDIO_DRIVE_DTSx_SHIFT)
+#define  SDIO_DTSx_SET_TYPE_A	(1 << SDIO_DRIVE_DTSx_SHIFT)
+#define  SDIO_DTSx_SET_TYPE_C	(2 << SDIO_DRIVE_DTSx_SHIFT)
+#define  SDIO_DTSx_SET_TYPE_D	(3 << SDIO_DRIVE_DTSx_SHIFT)
+/*
+ * Function Basic Registers (FBR)
+ */
+
+#define SDIO_FBR_BASE(f)	((f) * 0x100) /* base of function f's FBRs */
+
+#define SDIO_FBR_STD_IF		0x00
+
+#define  SDIO_FBR_SUPPORTS_CSA	0x40	/* supports Code Storage Area */
+#define  SDIO_FBR_ENABLE_CSA	0x80	/* enable Code Storage Area */
+
+#define SDIO_FBR_STD_IF_EXT	0x01
+
+#define SDIO_FBR_POWER		0x02
+
+#define  SDIO_FBR_POWER_SPS	0x01	/* Supports Power Selection */
+#define  SDIO_FBR_POWER_EPS	0x02	/* Enable (low) Power Selection */
+
+#define SDIO_FBR_CIS		0x09	/* CIS pointer (3 bytes) */
+
+
+#define SDIO_FBR_CSA		0x0C	/* CSA pointer (3 bytes) */
+
+#define SDIO_FBR_CSA_DATA	0x0F
+
+#define SDIO_FBR_BLKSIZE	0x10	/* block size (2 bytes) */
+
+#endif /* LINUX_MMC_SDIO_H */
diff --git a/kernel/include/linux/mmc/sdio_func.h b/kernel/include/linux/mmc/sdio_func.h
new file mode 100644
index 000000000..aab032a6a
--- /dev/null
+++ b/kernel/include/linux/mmc/sdio_func.h
@@ -0,0 +1,162 @@
+/*
+ *  include/linux/mmc/sdio_func.h
+ *
+ *  Copyright 2007-2008 Pierre Ossman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#ifndef LINUX_MMC_SDIO_FUNC_H
+#define LINUX_MMC_SDIO_FUNC_H
+
+#include <linux/device.h>
+#include <linux/mod_devicetable.h>
+
+#include <linux/mmc/pm.h>
+
+struct mmc_card;
+struct sdio_func;
+
+typedef void (sdio_irq_handler_t)(struct sdio_func *);
+
+/*
+ * SDIO function CIS tuple (unknown to the core)
+ */
+struct sdio_func_tuple {
+	struct sdio_func_tuple *next;
+	unsigned char code;
+	unsigned char size;
+	unsigned char data[0];
+};
+
+/*
+ * SDIO function devices
+ */
+struct sdio_func {
+	struct mmc_card		*card;		/* the card this device belongs to */
+	struct device		dev;		/* the device */
+	sdio_irq_handler_t	*irq_handler;	/* IRQ callback */
+	unsigned int		num;		/* function number */
+
+	unsigned char		class;		/* standard interface class */
+	unsigned short		vendor;		/* vendor id */
+	unsigned short		device;		/* device id */
+
+	unsigned		max_blksize;	/* maximum block size */
+	unsigned		cur_blksize;	/* current block size */
+
+	unsigned		enable_timeout;	/* max enable timeout in msec */
+
+	unsigned int		state;		/* function state */
+#define SDIO_STATE_PRESENT	(1<<0)		/* present in sysfs */
+
+	u8			tmpbuf[4];	/* DMA:able scratch buffer */
+
+	unsigned		num_info;	/* number of info strings */
+	const char		**info;		/* info strings */
+
+	struct sdio_func_tuple *tuples;
+};
+
+#define sdio_func_present(f)	((f)->state & SDIO_STATE_PRESENT)
+
+#define sdio_func_set_present(f) ((f)->state |= SDIO_STATE_PRESENT)
+
+#define sdio_func_id(f)		(dev_name(&(f)->dev))
+
+#define sdio_get_drvdata(f)	dev_get_drvdata(&(f)->dev)
+#define sdio_set_drvdata(f,d)	dev_set_drvdata(&(f)->dev, d)
+#define dev_to_sdio_func(d)	container_of(d, struct sdio_func, dev)
+
+/*
+ * SDIO function device driver
+ */
+struct sdio_driver {
+	char *name;
+	const struct sdio_device_id *id_table;
+
+	int (*probe)(struct sdio_func *, const struct sdio_device_id *);
+	void (*remove)(struct sdio_func *);
+
+	struct device_driver drv;
+};
+
+/**
+ * SDIO_DEVICE - macro used to describe a specific SDIO device
+ * @vend: the 16 bit manufacturer code
+ * @dev: the 16 bit function id
+ *
+ * This macro is used to create a struct sdio_device_id that matches a
+ * specific device. The class field will be set to SDIO_ANY_ID.
+ */
+#define SDIO_DEVICE(vend,dev) \
+	.class = SDIO_ANY_ID, \
+	.vendor = (vend), .device = (dev)
+
+/**
+ * SDIO_DEVICE_CLASS - macro used to describe a specific SDIO device class
+ * @dev_class: the 8 bit standard interface code
+ *
+ * This macro is used to create a struct sdio_device_id that matches a
+ * specific standard SDIO function type.  The vendor and device fields will
+ * be set to SDIO_ANY_ID.
+ */
+#define SDIO_DEVICE_CLASS(dev_class) \
+	.class = (dev_class), \
+	.vendor = SDIO_ANY_ID, .device = SDIO_ANY_ID
+
+extern int sdio_register_driver(struct sdio_driver *);
+extern void sdio_unregister_driver(struct sdio_driver *);
+
+/*
+ * SDIO I/O operations
+ */
+extern void sdio_claim_host(struct sdio_func *func);
+extern void sdio_release_host(struct sdio_func *func);
+
+extern int sdio_enable_func(struct sdio_func *func);
+extern int sdio_disable_func(struct sdio_func *func);
+
+extern int sdio_set_block_size(struct sdio_func *func, unsigned blksz);
+
+extern int sdio_claim_irq(struct sdio_func *func, sdio_irq_handler_t *handler);
+extern int sdio_release_irq(struct sdio_func *func);
+
+extern unsigned int sdio_align_size(struct sdio_func *func, unsigned int sz);
+
+extern u8 sdio_readb(struct sdio_func *func, unsigned int addr, int *err_ret);
+extern u16 sdio_readw(struct sdio_func *func, unsigned int addr, int *err_ret);
+extern u32 sdio_readl(struct sdio_func *func, unsigned int addr, int *err_ret);
+
+extern int sdio_memcpy_fromio(struct sdio_func *func, void *dst,
+	unsigned int addr, int count);
+extern int sdio_readsb(struct sdio_func *func, void *dst,
+	unsigned int addr, int count);
+
+extern void sdio_writeb(struct sdio_func *func, u8 b,
+	unsigned int addr, int *err_ret);
+extern void sdio_writew(struct sdio_func *func, u16 b,
+	unsigned int addr, int *err_ret);
+extern void sdio_writel(struct sdio_func *func, u32 b,
+	unsigned int addr, int *err_ret);
+
+extern u8 sdio_writeb_readb(struct sdio_func *func, u8 write_byte,
+	unsigned int addr, int *err_ret);
+
+extern int sdio_memcpy_toio(struct sdio_func *func, unsigned int addr,
+	void *src, int count);
+extern int sdio_writesb(struct sdio_func *func, unsigned int addr,
+	void *src, int count);
+
+extern unsigned char sdio_f0_readb(struct sdio_func *func,
+	unsigned int addr, int *err_ret);
+extern void sdio_f0_writeb(struct sdio_func *func, unsigned char b,
+	unsigned int addr, int *err_ret);
+
+extern mmc_pm_flag_t sdio_get_host_pm_caps(struct sdio_func *func);
+extern int sdio_set_host_pm_flags(struct sdio_func *func, mmc_pm_flag_t flags);
+
+#endif /* LINUX_MMC_SDIO_FUNC_H */
diff --git a/kernel/include/linux/mmc/sdio_ids.h b/kernel/include/linux/mmc/sdio_ids.h
new file mode 100644
index 000000000..83430f2ea
--- /dev/null
+++ b/kernel/include/linux/mmc/sdio_ids.h
@@ -0,0 +1,61 @@
+/*
+ * SDIO Classes, Interface Types, Manufacturer IDs, etc.
+ */
+
+#ifndef LINUX_MMC_SDIO_IDS_H
+#define LINUX_MMC_SDIO_IDS_H
+
+/*
+ * Standard SDIO Function Interfaces
+ */
+
+#define SDIO_CLASS_NONE		0x00	/* Not a SDIO standard interface */
+#define SDIO_CLASS_UART		0x01	/* standard UART interface */
+#define SDIO_CLASS_BT_A		0x02	/* Type-A BlueTooth std interface */
+#define SDIO_CLASS_BT_B		0x03	/* Type-B BlueTooth std interface */
+#define SDIO_CLASS_GPS		0x04	/* GPS standard interface */
+#define SDIO_CLASS_CAMERA	0x05	/* Camera standard interface */
+#define SDIO_CLASS_PHS		0x06	/* PHS standard interface */
+#define SDIO_CLASS_WLAN		0x07	/* WLAN interface */
+#define SDIO_CLASS_ATA		0x08	/* Embedded SDIO-ATA std interface */
+#define SDIO_CLASS_BT_AMP	0x09	/* Type-A Bluetooth AMP interface */
+
+/*
+ * Vendors and devices.  Sort key: vendor first, device next.
+ */
+#define SDIO_VENDOR_ID_BROADCOM			0x02d0
+#define SDIO_DEVICE_ID_BROADCOM_43143		0xa887
+#define SDIO_DEVICE_ID_BROADCOM_43241		0x4324
+#define SDIO_DEVICE_ID_BROADCOM_4329		0x4329
+#define SDIO_DEVICE_ID_BROADCOM_4330		0x4330
+#define SDIO_DEVICE_ID_BROADCOM_4334		0x4334
+#define SDIO_DEVICE_ID_BROADCOM_43340		0xa94c
+#define SDIO_DEVICE_ID_BROADCOM_43341		0xa94d
+#define SDIO_DEVICE_ID_BROADCOM_4335_4339	0x4335
+#define SDIO_DEVICE_ID_BROADCOM_43362		0xa962
+#define SDIO_DEVICE_ID_BROADCOM_43430		0xa9a6
+#define SDIO_DEVICE_ID_BROADCOM_4345		0x4345
+#define SDIO_DEVICE_ID_BROADCOM_4354		0x4354
+
+#define SDIO_VENDOR_ID_INTEL			0x0089
+#define SDIO_DEVICE_ID_INTEL_IWMC3200WIMAX	0x1402
+#define SDIO_DEVICE_ID_INTEL_IWMC3200WIFI	0x1403
+#define SDIO_DEVICE_ID_INTEL_IWMC3200TOP	0x1404
+#define SDIO_DEVICE_ID_INTEL_IWMC3200GPS	0x1405
+#define SDIO_DEVICE_ID_INTEL_IWMC3200BT		0x1406
+#define SDIO_DEVICE_ID_INTEL_IWMC3200WIMAX_2G5	0x1407
+
+#define SDIO_VENDOR_ID_MARVELL			0x02df
+#define SDIO_DEVICE_ID_MARVELL_LIBERTAS		0x9103
+#define SDIO_DEVICE_ID_MARVELL_8688WLAN		0x9104
+#define SDIO_DEVICE_ID_MARVELL_8688BT		0x9105
+
+#define SDIO_VENDOR_ID_SIANO			0x039a
+#define SDIO_DEVICE_ID_SIANO_NOVA_B0		0x0201
+#define SDIO_DEVICE_ID_SIANO_NICE		0x0202
+#define SDIO_DEVICE_ID_SIANO_VEGA_A0		0x0300
+#define SDIO_DEVICE_ID_SIANO_VENICE		0x0301
+#define SDIO_DEVICE_ID_SIANO_NOVA_A0		0x1100
+#define SDIO_DEVICE_ID_SIANO_STELLAR 		0x5347
+
+#endif /* LINUX_MMC_SDIO_IDS_H */
diff --git a/kernel/include/linux/mmc/sh_mmcif.h b/kernel/include/linux/mmc/sh_mmcif.h
new file mode 100644
index 000000000..ccd8fb2ca
--- /dev/null
+++ b/kernel/include/linux/mmc/sh_mmcif.h
@@ -0,0 +1,218 @@
+/*
+ * include/linux/mmc/sh_mmcif.h
+ *
+ * platform data for eMMC driver
+ *
+ * Copyright (C) 2010 Renesas Solutions Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ *
+ */
+
+#ifndef LINUX_MMC_SH_MMCIF_H
+#define LINUX_MMC_SH_MMCIF_H
+
+#include <linux/io.h>
+#include <linux/platform_device.h>
+
+/*
+ * MMCIF : CE_CLK_CTRL [19:16]
+ * 1000 : Peripheral clock / 512
+ * 0111 : Peripheral clock / 256
+ * 0110 : Peripheral clock / 128
+ * 0101 : Peripheral clock / 64
+ * 0100 : Peripheral clock / 32
+ * 0011 : Peripheral clock / 16
+ * 0010 : Peripheral clock / 8
+ * 0001 : Peripheral clock / 4
+ * 0000 : Peripheral clock / 2
+ * 1111 : Peripheral clock (sup_pclk set '1')
+ */
+
+struct sh_mmcif_plat_data {
+	int (*get_cd)(struct platform_device *pdef);
+	unsigned int		slave_id_tx;	/* embedded slave_id_[tr]x */
+	unsigned int		slave_id_rx;
+	bool			use_cd_gpio : 1;
+	bool			ccs_unsupported : 1;
+	bool			clk_ctrl2_present : 1;
+	unsigned int		cd_gpio;
+	u8			sup_pclk;	/* 1 :SH7757, 0: SH7724/SH7372 */
+	unsigned long		caps;
+	u32			ocr;
+};
+
+#define MMCIF_CE_CMD_SET	0x00000000
+#define MMCIF_CE_ARG		0x00000008
+#define MMCIF_CE_ARG_CMD12	0x0000000C
+#define MMCIF_CE_CMD_CTRL	0x00000010
+#define MMCIF_CE_BLOCK_SET	0x00000014
+#define MMCIF_CE_CLK_CTRL	0x00000018
+#define MMCIF_CE_BUF_ACC	0x0000001C
+#define MMCIF_CE_RESP3		0x00000020
+#define MMCIF_CE_RESP2		0x00000024
+#define MMCIF_CE_RESP1		0x00000028
+#define MMCIF_CE_RESP0		0x0000002C
+#define MMCIF_CE_RESP_CMD12	0x00000030
+#define MMCIF_CE_DATA		0x00000034
+#define MMCIF_CE_INT		0x00000040
+#define MMCIF_CE_INT_MASK	0x00000044
+#define MMCIF_CE_HOST_STS1	0x00000048
+#define MMCIF_CE_HOST_STS2	0x0000004C
+#define MMCIF_CE_CLK_CTRL2	0x00000070
+#define MMCIF_CE_VERSION	0x0000007C
+
+/* CE_BUF_ACC */
+#define BUF_ACC_DMAWEN		(1 << 25)
+#define BUF_ACC_DMAREN		(1 << 24)
+#define BUF_ACC_BUSW_32		(0 << 17)
+#define BUF_ACC_BUSW_16		(1 << 17)
+#define BUF_ACC_ATYP		(1 << 16)
+
+/* CE_CLK_CTRL */
+#define CLK_ENABLE		(1 << 24) /* 1: output mmc clock */
+#define CLK_CLEAR		(0xf << 16)
+#define CLK_SUP_PCLK		(0xf << 16)
+#define CLKDIV_4		(1 << 16) /* mmc clock frequency.
+					   * n: bus clock/(2^(n+1)) */
+#define CLKDIV_256		(7 << 16) /* mmc clock frequency. (see above) */
+#define SRSPTO_256		(2 << 12) /* resp timeout */
+#define SRBSYTO_29		(0xf << 8) /* resp busy timeout */
+#define SRWDTO_29		(0xf << 4) /* read/write timeout */
+#define SCCSTO_29		(0xf << 0) /* ccs timeout */
+
+/* CE_VERSION */
+#define SOFT_RST_ON		(1 << 31)
+#define SOFT_RST_OFF		0
+
+static inline u32 sh_mmcif_readl(void __iomem *addr, int reg)
+{
+	return __raw_readl(addr + reg);
+}
+
+static inline void sh_mmcif_writel(void __iomem *addr, int reg, u32 val)
+{
+	__raw_writel(val, addr + reg);
+}
+
+#define SH_MMCIF_BBS 512 /* boot block size */
+
+static inline void sh_mmcif_boot_cmd_send(void __iomem *base,
+					  unsigned long cmd, unsigned long arg)
+{
+	sh_mmcif_writel(base, MMCIF_CE_INT, 0);
+	sh_mmcif_writel(base, MMCIF_CE_ARG, arg);
+	sh_mmcif_writel(base, MMCIF_CE_CMD_SET, cmd);
+}
+
+static inline int sh_mmcif_boot_cmd_poll(void __iomem *base, unsigned long mask)
+{
+	unsigned long tmp;
+	int cnt;
+
+	for (cnt = 0; cnt < 1000000; cnt++) {
+		tmp = sh_mmcif_readl(base, MMCIF_CE_INT);
+		if (tmp & mask) {
+			sh_mmcif_writel(base, MMCIF_CE_INT, tmp & ~mask);
+			return 0;
+		}
+	}
+
+	return -1;
+}
+
+static inline int sh_mmcif_boot_cmd(void __iomem *base,
+				    unsigned long cmd, unsigned long arg)
+{
+	sh_mmcif_boot_cmd_send(base, cmd, arg);
+	return sh_mmcif_boot_cmd_poll(base, 0x00010000);
+}
+
+static inline int sh_mmcif_boot_do_read_single(void __iomem *base,
+					       unsigned int block_nr,
+					       unsigned long *buf)
+{
+	int k;
+
+	/* CMD13 - Status */
+	sh_mmcif_boot_cmd(base, 0x0d400000, 0x00010000);
+
+	if (sh_mmcif_readl(base, MMCIF_CE_RESP0) != 0x0900)
+		return -1;
+
+	/* CMD17 - Read */
+	sh_mmcif_boot_cmd(base, 0x11480000, block_nr * SH_MMCIF_BBS);
+	if (sh_mmcif_boot_cmd_poll(base, 0x00100000) < 0)
+		return -1;
+
+	for (k = 0; k < (SH_MMCIF_BBS / 4); k++)
+		buf[k] = sh_mmcif_readl(base, MMCIF_CE_DATA);
+
+	return 0;
+}
+
+static inline int sh_mmcif_boot_do_read(void __iomem *base,
+					unsigned long first_block,
+					unsigned long nr_blocks,
+					void *buf)
+{
+	unsigned long k;
+	int ret = 0;
+
+	/* In data transfer mode: Set clock to Bus clock/4 (about 20Mhz) */
+	sh_mmcif_writel(base, MMCIF_CE_CLK_CTRL,
+			CLK_ENABLE | CLKDIV_4 | SRSPTO_256 |
+			SRBSYTO_29 | SRWDTO_29 | SCCSTO_29);
+
+	/* CMD9 - Get CSD */
+	sh_mmcif_boot_cmd(base, 0x09806000, 0x00010000);
+
+	/* CMD7 - Select the card */
+	sh_mmcif_boot_cmd(base, 0x07400000, 0x00010000);
+
+	/* CMD16 - Set the block size */
+	sh_mmcif_boot_cmd(base, 0x10400000, SH_MMCIF_BBS);
+
+	for (k = 0; !ret && k < nr_blocks; k++)
+		ret = sh_mmcif_boot_do_read_single(base, first_block + k,
+						   buf + (k * SH_MMCIF_BBS));
+
+	return ret;
+}
+
+static inline void sh_mmcif_boot_init(void __iomem *base)
+{
+	/* reset */
+	sh_mmcif_writel(base, MMCIF_CE_VERSION, SOFT_RST_ON);
+	sh_mmcif_writel(base, MMCIF_CE_VERSION, SOFT_RST_OFF);
+
+	/* byte swap */
+	sh_mmcif_writel(base, MMCIF_CE_BUF_ACC, BUF_ACC_ATYP);
+
+	/* Set block size in MMCIF hardware */
+	sh_mmcif_writel(base, MMCIF_CE_BLOCK_SET, SH_MMCIF_BBS);
+
+	/* Enable the clock, set it to Bus clock/256 (about 325Khz). */
+	sh_mmcif_writel(base, MMCIF_CE_CLK_CTRL,
+			CLK_ENABLE | CLKDIV_256 | SRSPTO_256 |
+			SRBSYTO_29 | SRWDTO_29 | SCCSTO_29);
+
+	/* CMD0 */
+	sh_mmcif_boot_cmd(base, 0x00000040, 0);
+
+	/* CMD1 - Get OCR */
+	do {
+		sh_mmcif_boot_cmd(base, 0x01405040, 0x40300000); /* CMD1 */
+	} while ((sh_mmcif_readl(base, MMCIF_CE_RESP0) & 0x80000000)
+		 != 0x80000000);
+
+	/* CMD2 - Get CID */
+	sh_mmcif_boot_cmd(base, 0x02806040, 0);
+
+	/* CMD3 - Set card relative address */
+	sh_mmcif_boot_cmd(base, 0x03400040, 0x00010000);
+}
+
+#endif /* LINUX_MMC_SH_MMCIF_H */
diff --git a/kernel/include/linux/mmc/sh_mobile_sdhi.h b/kernel/include/linux/mmc/sh_mobile_sdhi.h
new file mode 100644
index 000000000..95d6f0314
--- /dev/null
+++ b/kernel/include/linux/mmc/sh_mobile_sdhi.h
@@ -0,0 +1,10 @@
+#ifndef LINUX_MMC_SH_MOBILE_SDHI_H
+#define LINUX_MMC_SH_MOBILE_SDHI_H
+
+#include <linux/types.h>
+
+#define SH_MOBILE_SDHI_IRQ_CARD_DETECT	"card_detect"
+#define SH_MOBILE_SDHI_IRQ_SDCARD	"sdcard"
+#define SH_MOBILE_SDHI_IRQ_SDIO		"sdio"
+
+#endif /* LINUX_MMC_SH_MOBILE_SDHI_H */
diff --git a/kernel/include/linux/mmc/slot-gpio.h b/kernel/include/linux/mmc/slot-gpio.h
new file mode 100644
index 000000000..3945a8c9d
--- /dev/null
+++ b/kernel/include/linux/mmc/slot-gpio.h
@@ -0,0 +1,33 @@
+/*
+ * Generic GPIO card-detect helper header
+ *
+ * Copyright (C) 2011, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef MMC_SLOT_GPIO_H
+#define MMC_SLOT_GPIO_H
+
+struct mmc_host;
+
+int mmc_gpio_get_ro(struct mmc_host *host);
+int mmc_gpio_request_ro(struct mmc_host *host, unsigned int gpio);
+
+int mmc_gpio_get_cd(struct mmc_host *host);
+int mmc_gpio_request_cd(struct mmc_host *host, unsigned int gpio,
+			unsigned int debounce);
+
+int mmc_gpiod_request_cd(struct mmc_host *host, const char *con_id,
+			 unsigned int idx, bool override_active_level,
+			 unsigned int debounce, bool *gpio_invert);
+int mmc_gpiod_request_ro(struct mmc_host *host, const char *con_id,
+			 unsigned int idx, bool override_active_level,
+			 unsigned int debounce, bool *gpio_invert);
+void mmc_gpio_set_cd_isr(struct mmc_host *host,
+			 irqreturn_t (*isr)(int irq, void *dev_id));
+void mmc_gpiod_request_cd_irq(struct mmc_host *host);
+
+#endif
diff --git a/kernel/include/linux/mmc/tmio.h b/kernel/include/linux/mmc/tmio.h
new file mode 100644
index 000000000..84d9053b5
--- /dev/null
+++ b/kernel/include/linux/mmc/tmio.h
@@ -0,0 +1,66 @@
+/*
+ * include/linux/mmc/tmio.h
+ *
+ * Copyright (C) 2007 Ian Molton
+ * Copyright (C) 2004 Ian Molton
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Driver for the MMC / SD / SDIO cell found in:
+ *
+ * TC6393XB TC6391XB TC6387XB T7L66XB ASIC3
+ */
+#ifndef LINUX_MMC_TMIO_H
+#define LINUX_MMC_TMIO_H
+
+#define CTL_SD_CMD 0x00
+#define CTL_ARG_REG 0x04
+#define CTL_STOP_INTERNAL_ACTION 0x08
+#define CTL_XFER_BLK_COUNT 0xa
+#define CTL_RESPONSE 0x0c
+#define CTL_STATUS 0x1c
+#define CTL_STATUS2 0x1e
+#define CTL_IRQ_MASK 0x20
+#define CTL_SD_CARD_CLK_CTL 0x24
+#define CTL_SD_XFER_LEN 0x26
+#define CTL_SD_MEM_CARD_OPT 0x28
+#define CTL_SD_ERROR_DETAIL_STATUS 0x2c
+#define CTL_SD_DATA_PORT 0x30
+#define CTL_TRANSACTION_CTL 0x34
+#define CTL_SDIO_STATUS 0x36
+#define CTL_SDIO_IRQ_MASK 0x38
+#define CTL_DMA_ENABLE 0xd8
+#define CTL_RESET_SD 0xe0
+#define CTL_VERSION 0xe2
+#define CTL_SDIO_REGS 0x100
+#define CTL_CLK_AND_WAIT_CTL 0x138
+#define CTL_RESET_SDIO 0x1e0
+
+/* Definitions for values the CTRL_STATUS register can take. */
+#define TMIO_STAT_CMDRESPEND    0x00000001
+#define TMIO_STAT_DATAEND       0x00000004
+#define TMIO_STAT_CARD_REMOVE   0x00000008
+#define TMIO_STAT_CARD_INSERT   0x00000010
+#define TMIO_STAT_SIGSTATE      0x00000020
+#define TMIO_STAT_WRPROTECT     0x00000080
+#define TMIO_STAT_CARD_REMOVE_A 0x00000100
+#define TMIO_STAT_CARD_INSERT_A 0x00000200
+#define TMIO_STAT_SIGSTATE_A    0x00000400
+#define TMIO_STAT_CMD_IDX_ERR   0x00010000
+#define TMIO_STAT_CRCFAIL       0x00020000
+#define TMIO_STAT_STOPBIT_ERR   0x00040000
+#define TMIO_STAT_DATATIMEOUT   0x00080000
+#define TMIO_STAT_RXOVERFLOW    0x00100000
+#define TMIO_STAT_TXUNDERRUN    0x00200000
+#define TMIO_STAT_CMDTIMEOUT    0x00400000
+#define TMIO_STAT_RXRDY         0x01000000
+#define TMIO_STAT_TXRQ          0x02000000
+#define TMIO_STAT_ILL_FUNC      0x20000000
+#define TMIO_STAT_CMD_BUSY      0x40000000
+#define TMIO_STAT_ILL_ACCESS    0x80000000
+
+#define TMIO_BBS		512		/* Boot block size */
+
+#endif /* LINUX_MMC_TMIO_H */