Upgrade to 4.4.50-rt62

The current kernel is based on rt kernel v4.4.6-rt14. We will upgrade it
to 4.4.50-rt62.
The command to achieve it is:
a) Clone a git repo from
git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-stable-rt.git

b) Get the diff between this two changesets:
git diff 640eca2901f3435e616157b11379d3223a44b391
705619beeea1b0b48219a683fd1a901a86fdaf5e

where the two commits are:
[yjiang5@jnakajim-build linux-stable-rt]$ git show --oneline --name-only
640eca2901f3435e616157b11379d3223a44b391
640eca2901f3 v4.4.6-rt14
localversion-rt
[yjiang5@jnakajim-build linux-stable-rt]$ git show --oneline --name-only
705619beeea1b0b48219a683fd1a901a86fdaf5e
705619beeea1 Linux 4.4.50-rt62
localversion-rt

c) One patch has been backported thus revert the patch before applying.

 filterdiff -p1 -x scripts/package/Makefile
~/tmp/v4.4.6-rt14-4.4.50-rt62.diff  |patch -p1 --dry-run

Upstream status: backport

Change-Id: I244d57a32f6066e5a5b9915f9fbf99e7bbca6e01
Signed-off-by: Yunhong Jiang <yunhong.jiang@linux.intel.com>

4 files changed, 23 insertions, 6 deletions

diff --git a/kernel/include/linux/mfd/88pm80x.h b/kernel/include/linux/mfd/88pm80x.h
index d409ceb22..c118a7ec9 100644
--- a/kernel/include/linux/mfd/88pm80x.h
+++ b/kernel/include/linux/mfd/88pm80x.h
@@ -350,7 +350,7 @@ static inline int pm80x_dev_suspend(struct device *dev)
 	int irq = platform_get_irq(pdev, 0);
 
 	if (device_may_wakeup(dev))
-		set_bit((1 << irq), &chip->wu_flag);
+		set_bit(irq, &chip->wu_flag);
 
 	return 0;
 }
@@ -362,7 +362,7 @@ static inline int pm80x_dev_resume(struct device *dev)
 	int irq = platform_get_irq(pdev, 0);
 
 	if (device_may_wakeup(dev))
-		clear_bit((1 << irq), &chip->wu_flag);
+		clear_bit(irq, &chip->wu_flag);
 
 	return 0;
 }
diff --git a/kernel/include/linux/mfd/cros_ec.h b/kernel/include/linux/mfd/cros_ec.h
index 494682ce4..3ab3cede2 100644
--- a/kernel/include/linux/mfd/cros_ec.h
+++ b/kernel/include/linux/mfd/cros_ec.h
@@ -224,6 +224,21 @@ int cros_ec_cmd_xfer(struct cros_ec_device *ec_dev,
 		     struct cros_ec_command *msg);
 
 /**
+ * cros_ec_cmd_xfer_status - Send a command to the ChromeOS EC
+ *
+ * This function is identical to cros_ec_cmd_xfer, except it returns success
+ * status only if both the command was transmitted successfully and the EC
+ * replied with success status. It's not necessary to check msg->result when
+ * using this function.
+ *
+ * @ec_dev: EC device
+ * @msg: Message to write
+ * @return: Num. of bytes transferred on success, <0 on failure
+ */
+int cros_ec_cmd_xfer_status(struct cros_ec_device *ec_dev,
+			    struct cros_ec_command *msg);
+
+/**
  * cros_ec_remove - Remove a ChromeOS EC
  *
  * Call this to deregister a ChromeOS EC, then clean up any private data.
diff --git a/kernel/include/linux/mfd/samsung/s2mps11.h b/kernel/include/linux/mfd/samsung/s2mps11.h
index b288965e8..2c14eeca4 100644
--- a/kernel/include/linux/mfd/samsung/s2mps11.h
+++ b/kernel/include/linux/mfd/samsung/s2mps11.h
@@ -173,10 +173,12 @@ enum s2mps11_regulators {
 
 #define S2MPS11_LDO_VSEL_MASK	0x3F
 #define S2MPS11_BUCK_VSEL_MASK	0xFF
+#define S2MPS11_BUCK9_VSEL_MASK	0x1F
 #define S2MPS11_ENABLE_MASK	(0x03 << S2MPS11_ENABLE_SHIFT)
 #define S2MPS11_ENABLE_SHIFT	0x06
 #define S2MPS11_LDO_N_VOLTAGES	(S2MPS11_LDO_VSEL_MASK + 1)
 #define S2MPS11_BUCK_N_VOLTAGES (S2MPS11_BUCK_VSEL_MASK + 1)
+#define S2MPS11_BUCK9_N_VOLTAGES (S2MPS11_BUCK9_VSEL_MASK + 1)
 #define S2MPS11_RAMP_DELAY	25000		/* uV/us */
 
 #define S2MPS11_CTRL1_PWRHOLD_MASK	BIT(4)
diff --git a/kernel/include/linux/mfd/ti_am335x_tscadc.h b/kernel/include/linux/mfd/ti_am335x_tscadc.h
index 1fd50dcfe..175c82699 100644
--- a/kernel/include/linux/mfd/ti_am335x_tscadc.h
+++ b/kernel/include/linux/mfd/ti_am335x_tscadc.h
@@ -138,16 +138,16 @@
 /*
  * time in us for processing a single channel, calculated as follows:
  *
- * num cycles = open delay + (sample delay + conv time) * averaging
+ * max num cycles = open delay + (sample delay + conv time) * averaging
  *
- * num cycles: 152 + (1 + 13) * 16 = 376
+ * max num cycles: 262143 + (255 + 13) * 16 = 266431
  *
  * clock frequency: 26MHz / 8 = 3.25MHz
  * clock period: 1 / 3.25MHz = 308ns
  *
- * processing time: 376 * 308ns = 116us
+ * max processing time: 266431 * 308ns = 83ms(approx)
  */
-#define IDLE_TIMEOUT 116 /* microsec */
+#define IDLE_TIMEOUT 83 /* milliseconds */
 
 #define TSCADC_CELLS		2