These changes are the raw update to linux-4.4.6-rt14. Kernel sources

are taken from kernel.org, and rt patch from the rt wiki download page.

During the rebasing, the following patch collided:

Force tick interrupt and get rid of softirq magic(I70131fb85).

Collisions have been removed because its logic was found on the
source already.

Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>

1 files changed, 99 insertions, 13 deletions

diff --git a/kernel/include/linux/device.h b/kernel/include/linux/device.h
index 6558af90c..b8f411b57 100644
--- a/kernel/include/linux/device.h
+++ b/kernel/include/linux/device.h
@@ -196,12 +196,41 @@ extern struct kset *bus_get_kset(struct bus_type *bus);
 extern struct klist *bus_get_device_klist(struct bus_type *bus);
 
 /**
+ * enum probe_type - device driver probe type to try
+ *	Device drivers may opt in for special handling of their
+ *	respective probe routines. This tells the core what to
+ *	expect and prefer.
+ *
+ * @PROBE_DEFAULT_STRATEGY: Used by drivers that work equally well
+ *	whether probed synchronously or asynchronously.
+ * @PROBE_PREFER_ASYNCHRONOUS: Drivers for "slow" devices which
+ *	probing order is not essential for booting the system may
+ *	opt into executing their probes asynchronously.
+ * @PROBE_FORCE_SYNCHRONOUS: Use this to annotate drivers that need
+ *	their probe routines to run synchronously with driver and
+ *	device registration (with the exception of -EPROBE_DEFER
+ *	handling - re-probing always ends up being done asynchronously).
+ *
+ * Note that the end goal is to switch the kernel to use asynchronous
+ * probing by default, so annotating drivers with
+ * %PROBE_PREFER_ASYNCHRONOUS is a temporary measure that allows us
+ * to speed up boot process while we are validating the rest of the
+ * drivers.
+ */
+enum probe_type {
+	PROBE_DEFAULT_STRATEGY,
+	PROBE_PREFER_ASYNCHRONOUS,
+	PROBE_FORCE_SYNCHRONOUS,
+};
+
+/**
  * struct device_driver - The basic device driver structure
  * @name:	Name of the device driver.
  * @bus:	The bus which the device of this driver belongs to.
  * @owner:	The module owner.
  * @mod_name:	Used for built-in modules.
  * @suppress_bind_attrs: Disables bind/unbind via sysfs.
+ * @probe_type:	Type of the probe (synchronous or asynchronous) to use.
  * @of_match_table: The open firmware table.
  * @acpi_match_table: The ACPI match table.
  * @probe:	Called to query the existence of a specific device,
@@ -235,6 +264,7 @@ struct device_driver {
 	const char		*mod_name;	/* used for built-in modules */
 
 	bool suppress_bind_attrs;	/* disables bind/unbind via sysfs */
+	enum probe_type probe_type;
 
 	const struct of_device_id	*of_match_table;
 	const struct acpi_device_id	*acpi_match_table;
@@ -311,7 +341,7 @@ struct subsys_interface {
 	struct bus_type *subsys;
 	struct list_head node;
 	int (*add_dev)(struct device *dev, struct subsys_interface *sif);
-	int (*remove_dev)(struct device *dev, struct subsys_interface *sif);
+	void (*remove_dev)(struct device *dev, struct subsys_interface *sif);
 };
 
 int subsys_interface_register(struct subsys_interface *sif);
@@ -574,13 +604,21 @@ typedef void (*dr_release_t)(struct device *dev, void *res);
 typedef int (*dr_match_t)(struct device *dev, void *res, void *match_data);
 
 #ifdef CONFIG_DEBUG_DEVRES
-extern void *__devres_alloc(dr_release_t release, size_t size, gfp_t gfp,
-			     const char *name);
+extern void *__devres_alloc_node(dr_release_t release, size_t size, gfp_t gfp,
+				 int nid, const char *name);
 #define devres_alloc(release, size, gfp) \
-	__devres_alloc(release, size, gfp, #release)
+	__devres_alloc_node(release, size, gfp, NUMA_NO_NODE, #release)
+#define devres_alloc_node(release, size, gfp, nid) \
+	__devres_alloc_node(release, size, gfp, nid, #release)
 #else
-extern void *devres_alloc(dr_release_t release, size_t size, gfp_t gfp);
+extern void *devres_alloc_node(dr_release_t release, size_t size, gfp_t gfp,
+			       int nid);
+static inline void *devres_alloc(dr_release_t release, size_t size, gfp_t gfp)
+{
+	return devres_alloc_node(release, size, gfp, NUMA_NO_NODE);
+}
 #endif
+
 extern void devres_for_each_res(struct device *dev, dr_release_t release,
 				dr_match_t match, void *match_data,
 				void (*fn)(struct device *, void *, void *),
@@ -607,8 +645,9 @@ extern int devres_release_group(struct device *dev, void *id);
 
 /* managed devm_k.alloc/kfree for device drivers */
 extern void *devm_kmalloc(struct device *dev, size_t size, gfp_t gfp);
-extern char *devm_kvasprintf(struct device *dev, gfp_t gfp, const char *fmt,
-			     va_list ap);
+extern __printf(3, 0)
+char *devm_kvasprintf(struct device *dev, gfp_t gfp, const char *fmt,
+		      va_list ap);
 extern __printf(3, 4)
 char *devm_kasprintf(struct device *dev, gfp_t gfp, const char *fmt, ...);
 static inline void *devm_kzalloc(struct device *dev, size_t size, gfp_t gfp)
@@ -683,6 +722,8 @@ struct device_dma_parameters {
  * 		along with subsystem-level and driver-level callbacks.
  * @pins:	For device pin management.
  *		See Documentation/pinctrl.txt for details.
+ * @msi_list:	Hosts MSI descriptors
+ * @msi_domain: The generic MSI domain this device is using.
  * @numa_node:	NUMA node this device is close to.
  * @dma_mask:	Dma mask (if dma'ble device).
  * @coherent_dma_mask: Like dma_mask, but for alloc_coherent mapping as not all
@@ -743,9 +784,15 @@ struct device {
 	struct dev_pm_info	power;
 	struct dev_pm_domain	*pm_domain;
 
+#ifdef CONFIG_GENERIC_MSI_IRQ_DOMAIN
+	struct irq_domain	*msi_domain;
+#endif
 #ifdef CONFIG_PINCTRL
 	struct dev_pin_info	*pins;
 #endif
+#ifdef CONFIG_GENERIC_MSI_IRQ
+	struct list_head	msi_list;
+#endif
 
 #ifdef CONFIG_NUMA
 	int		numa_node;	/* NUMA node this device is close to */
@@ -830,6 +877,22 @@ static inline void set_dev_node(struct device *dev, int node)
 }
 #endif
 
+static inline struct irq_domain *dev_get_msi_domain(const struct device *dev)
+{
+#ifdef CONFIG_GENERIC_MSI_IRQ_DOMAIN
+	return dev->msi_domain;
+#else
+	return NULL;
+#endif
+}
+
+static inline void dev_set_msi_domain(struct device *dev, struct irq_domain *d)
+{
+#ifdef CONFIG_GENERIC_MSI_IRQ_DOMAIN
+	dev->msi_domain = d;
+#endif
+}
+
 static inline void *dev_get_drvdata(const struct device *dev)
 {
 	return dev->driver_data;
@@ -928,6 +991,8 @@ extern int __must_check device_add(struct device *dev);
 extern void device_del(struct device *dev);
 extern int device_for_each_child(struct device *dev, void *data,
 		     int (*fn)(struct device *dev, void *data));
+extern int device_for_each_child_reverse(struct device *dev, void *data,
+		     int (*fn)(struct device *dev, void *data));
 extern struct device *device_find_child(struct device *dev, void *data,
 				int (*match)(struct device *dev, void *data));
 extern int device_rename(struct device *dev, const char *new_name);
@@ -975,17 +1040,16 @@ extern int __must_check device_bind_driver(struct device *dev);
 extern void device_release_driver(struct device *dev);
 extern int  __must_check device_attach(struct device *dev);
 extern int __must_check driver_attach(struct device_driver *drv);
+extern void device_initial_probe(struct device *dev);
 extern int __must_check device_reprobe(struct device *dev);
 
 /*
  * Easy functions for dynamically creating devices on the fly
  */
-extern struct device *device_create_vargs(struct class *cls,
-					  struct device *parent,
-					  dev_t devt,
-					  void *drvdata,
-					  const char *fmt,
-					  va_list vargs);
+extern __printf(5, 0)
+struct device *device_create_vargs(struct class *cls, struct device *parent,
+				   dev_t devt, void *drvdata,
+				   const char *fmt, va_list vargs);
 extern __printf(5, 6)
 struct device *device_create(struct class *cls, struct device *parent,
 			     dev_t devt, void *drvdata,
@@ -1269,4 +1333,26 @@ static void __exit __driver##_exit(void) \
 } \
 module_exit(__driver##_exit);
 
+/**
+ * builtin_driver() - Helper macro for drivers that don't do anything
+ * special in init and have no exit. This eliminates some boilerplate.
+ * Each driver may only use this macro once, and calling it replaces
+ * device_initcall (or in some cases, the legacy __initcall).  This is
+ * meant to be a direct parallel of module_driver() above but without
+ * the __exit stuff that is not used for builtin cases.
+ *
+ * @__driver: driver name
+ * @__register: register function for this driver type
+ * @...: Additional arguments to be passed to __register
+ *
+ * Use this macro to construct bus specific macros for registering
+ * drivers, and do not use it on its own.
+ */
+#define builtin_driver(__driver, __register, ...) \
+static int __init __driver##_init(void) \
+{ \
+	return __register(&(__driver) , ##__VA_ARGS__); \
+} \
+device_initcall(__driver##_init);
+
 #endif /* _DEVICE_H_ */