summaryrefslogtreecommitdiffstats
path: root/kernel/include/linux/arcdevice.h
diff options
context:
space:
mode:
authorJosé Pekkarinen <jose.pekkarinen@nokia.com>2016-04-11 10:41:07 +0300
committerJosé Pekkarinen <jose.pekkarinen@nokia.com>2016-04-13 08:17:18 +0300
commite09b41010ba33a20a87472ee821fa407a5b8da36 (patch)
treed10dc367189862e7ca5c592f033dc3726e1df4e3 /kernel/include/linux/arcdevice.h
parentf93b97fd65072de626c074dbe099a1fff05ce060 (diff)
These changes are the raw update to linux-4.4.6-rt14. Kernel sources
are taken from kernel.org, and rt patch from the rt wiki download page. During the rebasing, the following patch collided: Force tick interrupt and get rid of softirq magic(I70131fb85). Collisions have been removed because its logic was found on the source already. Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769 Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>
Diffstat (limited to 'kernel/include/linux/arcdevice.h')
-rw-r--r--kernel/include/linux/arcdevice.h342
1 files changed, 0 insertions, 342 deletions
diff --git a/kernel/include/linux/arcdevice.h b/kernel/include/linux/arcdevice.h
deleted file mode 100644
index df0356220..000000000
--- a/kernel/include/linux/arcdevice.h
+++ /dev/null
@@ -1,342 +0,0 @@
-/*
- * INET An implementation of the TCP/IP protocol suite for the LINUX
- * operating system. NET is implemented using the BSD Socket
- * interface as the means of communication with the user level.
- *
- * Definitions used by the ARCnet driver.
- *
- * Authors: Avery Pennarun and David Woodhouse
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- */
-#ifndef _LINUX_ARCDEVICE_H
-#define _LINUX_ARCDEVICE_H
-
-#include <asm/timex.h>
-#include <linux/if_arcnet.h>
-
-#ifdef __KERNEL__
-#include <linux/irqreturn.h>
-
-/*
- * RECON_THRESHOLD is the maximum number of RECON messages to receive
- * within one minute before printing a "cabling problem" warning. The
- * default value should be fine.
- *
- * After that, a "cabling restored" message will be printed on the next IRQ
- * if no RECON messages have been received for 10 seconds.
- *
- * Do not define RECON_THRESHOLD at all if you want to disable this feature.
- */
-#define RECON_THRESHOLD 30
-
-
-/*
- * Define this to the minimum "timeout" value. If a transmit takes longer
- * than TX_TIMEOUT jiffies, Linux will abort the TX and retry. On a large
- * network, or one with heavy network traffic, this timeout may need to be
- * increased. The larger it is, though, the longer it will be between
- * necessary transmits - don't set this too high.
- */
-#define TX_TIMEOUT (HZ * 200 / 1000)
-
-
-/* Display warnings about the driver being an ALPHA version. */
-#undef ALPHA_WARNING
-
-
-/*
- * Debugging bitflags: each option can be enabled individually.
- *
- * Note: only debug flags included in the ARCNET_DEBUG_MAX define will
- * actually be available. GCC will (at least, GCC 2.7.0 will) notice
- * lines using a BUGLVL not in ARCNET_DEBUG_MAX and automatically optimize
- * them out.
- */
-#define D_NORMAL 1 /* important operational info */
-#define D_EXTRA 2 /* useful, but non-vital information */
-#define D_INIT 4 /* show init/probe messages */
-#define D_INIT_REASONS 8 /* show reasons for discarding probes */
-#define D_RECON 32 /* print a message whenever token is lost */
-#define D_PROTO 64 /* debug auto-protocol support */
-/* debug levels below give LOTS of output during normal operation! */
-#define D_DURING 128 /* trace operations (including irq's) */
-#define D_TX 256 /* show tx packets */
-#define D_RX 512 /* show rx packets */
-#define D_SKB 1024 /* show skb's */
-#define D_SKB_SIZE 2048 /* show skb sizes */
-#define D_TIMING 4096 /* show time needed to copy buffers to card */
-#define D_DEBUG 8192 /* Very detailed debug line for line */
-
-#ifndef ARCNET_DEBUG_MAX
-#define ARCNET_DEBUG_MAX (127) /* change to ~0 if you want detailed debugging */
-#endif
-
-#ifndef ARCNET_DEBUG
-#define ARCNET_DEBUG (D_NORMAL|D_EXTRA)
-#endif
-extern int arcnet_debug;
-
-/* macros to simplify debug checking */
-#define BUGLVL(x) if ((ARCNET_DEBUG_MAX)&arcnet_debug&(x))
-#define BUGMSG2(x,msg,args...) do { BUGLVL(x) printk(msg, ## args); } while (0)
-#define BUGMSG(x,msg,args...) \
- BUGMSG2(x, "%s%6s: " msg, \
- x==D_NORMAL ? KERN_WARNING \
- : x < D_DURING ? KERN_INFO : KERN_DEBUG, \
- dev->name , ## args)
-
-/* see how long a function call takes to run, expressed in CPU cycles */
-#define TIME(name, bytes, call) BUGLVL(D_TIMING) { \
- unsigned long _x, _y; \
- _x = get_cycles(); \
- call; \
- _y = get_cycles(); \
- BUGMSG(D_TIMING, \
- "%s: %d bytes in %lu cycles == " \
- "%lu Kbytes/100Mcycle\n",\
- name, bytes, _y - _x, \
- 100000000 / 1024 * bytes / (_y - _x + 1));\
- } \
- else { \
- call;\
- }
-
-
-/*
- * Time needed to reset the card - in ms (milliseconds). This works on my
- * SMC PC100. I can't find a reference that tells me just how long I
- * should wait.
- */
-#define RESETtime (300)
-
-/*
- * These are the max/min lengths of packet payload, not including the
- * arc_hardware header, but definitely including the soft header.
- *
- * Note: packet sizes 254, 255, 256 are impossible because of the way
- * ARCnet registers work That's why RFC1201 defines "exception" packets.
- * In non-RFC1201 protocols, we have to just tack some extra bytes on the
- * end.
- */
-#define MTU 253 /* normal packet max size */
-#define MinTU 257 /* extended packet min size */
-#define XMTU 508 /* extended packet max size */
-
-/* status/interrupt mask bit fields */
-#define TXFREEflag 0x01 /* transmitter available */
-#define TXACKflag 0x02 /* transmitted msg. ackd */
-#define RECONflag 0x04 /* network reconfigured */
-#define TESTflag 0x08 /* test flag */
-#define EXCNAKflag 0x08 /* excesive nak flag */
-#define RESETflag 0x10 /* power-on-reset */
-#define RES1flag 0x20 /* reserved - usually set by jumper */
-#define RES2flag 0x40 /* reserved - usually set by jumper */
-#define NORXflag 0x80 /* receiver inhibited */
-
-/* Flags used for IO-mapped memory operations */
-#define AUTOINCflag 0x40 /* Increase location with each access */
-#define IOMAPflag 0x02 /* (for 90xx) Use IO mapped memory, not mmap */
-#define ENABLE16flag 0x80 /* (for 90xx) Enable 16-bit mode */
-
-/* in the command register, the following bits have these meanings:
- * 0-2 command
- * 3-4 page number (for enable rcv/xmt command)
- * 7 receive broadcasts
- */
-#define NOTXcmd 0x01 /* disable transmitter */
-#define NORXcmd 0x02 /* disable receiver */
-#define TXcmd 0x03 /* enable transmitter */
-#define RXcmd 0x04 /* enable receiver */
-#define CONFIGcmd 0x05 /* define configuration */
-#define CFLAGScmd 0x06 /* clear flags */
-#define TESTcmd 0x07 /* load test flags */
-
-/* flags for "clear flags" command */
-#define RESETclear 0x08 /* power-on-reset */
-#define CONFIGclear 0x10 /* system reconfigured */
-
-#define EXCNAKclear 0x0E /* Clear and acknowledge the excive nak bit */
-
-/* flags for "load test flags" command */
-#define TESTload 0x08 /* test flag (diagnostic) */
-
-/* byte deposited into first address of buffers on reset */
-#define TESTvalue 0321 /* that's octal for 0xD1 :) */
-
-/* for "enable receiver" command */
-#define RXbcasts 0x80 /* receive broadcasts */
-
-/* flags for "define configuration" command */
-#define NORMALconf 0x00 /* 1-249 byte packets */
-#define EXTconf 0x08 /* 250-504 byte packets */
-
-/* card feature flags, set during auto-detection.
- * (currently only used by com20020pci)
- */
-#define ARC_IS_5MBIT 1 /* card default speed is 5MBit */
-#define ARC_CAN_10MBIT 2 /* card uses COM20022, supporting 10MBit,
- but default is 2.5MBit. */
-
-
-/* information needed to define an encapsulation driver */
-struct ArcProto {
- char suffix; /* a for RFC1201, e for ether-encap, etc. */
- int mtu; /* largest possible packet */
- int is_ip; /* This is a ip plugin - not a raw thing */
-
- void (*rx) (struct net_device * dev, int bufnum,
- struct archdr * pkthdr, int length);
- int (*build_header) (struct sk_buff * skb, struct net_device *dev,
- unsigned short ethproto, uint8_t daddr);
-
- /* these functions return '1' if the skb can now be freed */
- int (*prepare_tx) (struct net_device * dev, struct archdr * pkt, int length,
- int bufnum);
- int (*continue_tx) (struct net_device * dev, int bufnum);
- int (*ack_tx) (struct net_device * dev, int acked);
-};
-
-extern struct ArcProto *arc_proto_map[256], *arc_proto_default,
- *arc_bcast_proto, *arc_raw_proto;
-
-
-/*
- * "Incoming" is information needed for each address that could be sending
- * to us. Mostly for partially-received split packets.
- */
-struct Incoming {
- struct sk_buff *skb; /* packet data buffer */
- __be16 sequence; /* sequence number of assembly */
- uint8_t lastpacket, /* number of last packet (from 1) */
- numpackets; /* number of packets in split */
-};
-
-
-/* only needed for RFC1201 */
-struct Outgoing {
- struct ArcProto *proto; /* protocol driver that owns this:
- * if NULL, no packet is pending.
- */
- struct sk_buff *skb; /* buffer from upper levels */
- struct archdr *pkt; /* a pointer into the skb */
- uint16_t length, /* bytes total */
- dataleft, /* bytes left */
- segnum, /* segment being sent */
- numsegs; /* number of segments */
-};
-
-
-struct arcnet_local {
- uint8_t config, /* current value of CONFIG register */
- timeout, /* Extended timeout for COM20020 */
- backplane, /* Backplane flag for COM20020 */
- clockp, /* COM20020 clock divider */
- clockm, /* COM20020 clock multiplier flag */
- setup, /* Contents of setup1 register */
- setup2, /* Contents of setup2 register */
- intmask; /* current value of INTMASK register */
- uint8_t default_proto[256]; /* default encap to use for each host */
- int cur_tx, /* buffer used by current transmit, or -1 */
- next_tx, /* buffer where a packet is ready to send */
- cur_rx; /* current receive buffer */
- int lastload_dest, /* can last loaded packet be acked? */
- lasttrans_dest; /* can last TX'd packet be acked? */
- int timed_out; /* need to process TX timeout and drop packet */
- unsigned long last_timeout; /* time of last reported timeout */
- char *card_name; /* card ident string */
- int card_flags; /* special card features */
-
-
- /* On preemtive and SMB a lock is needed */
- spinlock_t lock;
-
- /*
- * Buffer management: an ARCnet card has 4 x 512-byte buffers, each of
- * which can be used for either sending or receiving. The new dynamic
- * buffer management routines use a simple circular queue of available
- * buffers, and take them as they're needed. This way, we simplify
- * situations in which we (for example) want to pre-load a transmit
- * buffer, or start receiving while we copy a received packet to
- * memory.
- *
- * The rules: only the interrupt handler is allowed to _add_ buffers to
- * the queue; thus, this doesn't require a lock. Both the interrupt
- * handler and the transmit function will want to _remove_ buffers, so
- * we need to handle the situation where they try to do it at the same
- * time.
- *
- * If next_buf == first_free_buf, the queue is empty. Since there are
- * only four possible buffers, the queue should never be full.
- */
- atomic_t buf_lock;
- int buf_queue[5];
- int next_buf, first_free_buf;
-
- /* network "reconfiguration" handling */
- unsigned long first_recon; /* time of "first" RECON message to count */
- unsigned long last_recon; /* time of most recent RECON */
- int num_recons; /* number of RECONs between first and last. */
- int network_down; /* do we think the network is down? */
-
- int excnak_pending; /* We just got an excesive nak interrupt */
-
- struct {
- uint16_t sequence; /* sequence number (incs with each packet) */
- __be16 aborted_seq;
-
- struct Incoming incoming[256]; /* one from each address */
- } rfc1201;
-
- /* really only used by rfc1201, but we'll pretend it's not */
- struct Outgoing outgoing; /* packet currently being sent */
-
- /* hardware-specific functions */
- struct {
- struct module *owner;
- void (*command) (struct net_device * dev, int cmd);
- int (*status) (struct net_device * dev);
- void (*intmask) (struct net_device * dev, int mask);
- int (*reset) (struct net_device * dev, int really_reset);
- void (*open) (struct net_device * dev);
- void (*close) (struct net_device * dev);
-
- void (*copy_to_card) (struct net_device * dev, int bufnum, int offset,
- void *buf, int count);
- void (*copy_from_card) (struct net_device * dev, int bufnum, int offset,
- void *buf, int count);
- } hw;
-
- void __iomem *mem_start; /* pointer to ioremap'ed MMIO */
-};
-
-
-#define ARCRESET(x) (lp->hw.reset(dev, (x)))
-#define ACOMMAND(x) (lp->hw.command(dev, (x)))
-#define ASTATUS() (lp->hw.status(dev))
-#define AINTMASK(x) (lp->hw.intmask(dev, (x)))
-
-
-
-#if ARCNET_DEBUG_MAX & D_SKB
-void arcnet_dump_skb(struct net_device *dev, struct sk_buff *skb, char *desc);
-#else
-#define arcnet_dump_skb(dev,skb,desc) ;
-#endif
-
-void arcnet_unregister_proto(struct ArcProto *proto);
-irqreturn_t arcnet_interrupt(int irq, void *dev_id);
-struct net_device *alloc_arcdev(const char *name);
-
-int arcnet_open(struct net_device *dev);
-int arcnet_close(struct net_device *dev);
-netdev_tx_t arcnet_send_packet(struct sk_buff *skb,
- struct net_device *dev);
-void arcnet_timeout(struct net_device *dev);
-
-#endif /* __KERNEL__ */
-#endif /* _LINUX_ARCDEVICE_H */