Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

1 files changed, 579 insertions, 0 deletions

diff --git a/kernel/drivers/xen/xen-selfballoon.c b/kernel/drivers/xen/xen-selfballoon.c
new file mode 100644
index 000000000..3b2bffde5
--- /dev/null
+++ b/kernel/drivers/xen/xen-selfballoon.c
@@ -0,0 +1,579 @@
+/******************************************************************************
+ * Xen selfballoon driver (and optional frontswap self-shrinking driver)
+ *
+ * Copyright (c) 2009-2011, Dan Magenheimer, Oracle Corp.
+ *
+ * This code complements the cleancache and frontswap patchsets to optimize
+ * support for Xen Transcendent Memory ("tmem").  The policy it implements
+ * is rudimentary and will likely improve over time, but it does work well
+ * enough today.
+ *
+ * Two functionalities are implemented here which both use "control theory"
+ * (feedback) to optimize memory utilization. In a virtualized environment
+ * such as Xen, RAM is often a scarce resource and we would like to ensure
+ * that each of a possibly large number of virtual machines is using RAM
+ * efficiently, i.e. using as little as possible when under light load
+ * and obtaining as much as possible when memory demands are high.
+ * Since RAM needs vary highly dynamically and sometimes dramatically,
+ * "hysteresis" is used, that is, memory target is determined not just
+ * on current data but also on past data stored in the system.
+ *
+ * "Selfballooning" creates memory pressure by managing the Xen balloon
+ * driver to decrease and increase available kernel memory, driven
+ * largely by the target value of "Committed_AS" (see /proc/meminfo).
+ * Since Committed_AS does not account for clean mapped pages (i.e. pages
+ * in RAM that are identical to pages on disk), selfballooning has the
+ * affect of pushing less frequently used clean pagecache pages out of
+ * kernel RAM and, presumably using cleancache, into Xen tmem where
+ * Xen can more efficiently optimize RAM utilization for such pages.
+ *
+ * When kernel memory demand unexpectedly increases faster than Xen, via
+ * the selfballoon driver, is able to (or chooses to) provide usable RAM,
+ * the kernel may invoke swapping.  In most cases, frontswap is able
+ * to absorb this swapping into Xen tmem.  However, due to the fact
+ * that the kernel swap subsystem assumes swapping occurs to a disk,
+ * swapped pages may sit on the disk for a very long time; even if
+ * the kernel knows the page will never be used again.  This is because
+ * the disk space costs very little and can be overwritten when
+ * necessary.  When such stale pages are in frontswap, however, they
+ * are taking up valuable real estate.  "Frontswap selfshrinking" works
+ * to resolve this:  When frontswap activity is otherwise stable
+ * and the guest kernel is not under memory pressure, the "frontswap
+ * selfshrinking" accounts for this by providing pressure to remove some
+ * pages from frontswap and return them to kernel memory.
+ *
+ * For both "selfballooning" and "frontswap-selfshrinking", a worker
+ * thread is used and sysfs tunables are provided to adjust the frequency
+ * and rate of adjustments to achieve the goal, as well as to disable one
+ * or both functions independently.
+ *
+ * While some argue that this functionality can and should be implemented
+ * in userspace, it has been observed that bad things happen (e.g. OOMs).
+ *
+ * System configuration note: Selfballooning should not be enabled on
+ * systems without a sufficiently large swap device configured; for best
+ * results, it is recommended that total swap be increased by the size
+ * of the guest memory. Note, that selfballooning should be disabled by default
+ * if frontswap is not configured.  Similarly selfballooning should be enabled
+ * by default if frontswap is configured and can be disabled with the
+ * "tmem.selfballooning=0" kernel boot option.  Finally, when frontswap is
+ * configured, frontswap-selfshrinking can be disabled  with the
+ * "tmem.selfshrink=0" kernel boot option.
+ *
+ * Selfballooning is disallowed in domain0 and force-disabled.
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/bootmem.h>
+#include <linux/swap.h>
+#include <linux/mm.h>
+#include <linux/mman.h>
+#include <linux/module.h>
+#include <linux/workqueue.h>
+#include <linux/device.h>
+#include <xen/balloon.h>
+#include <xen/tmem.h>
+#include <xen/xen.h>
+
+/* Enable/disable with sysfs. */
+static int xen_selfballooning_enabled __read_mostly;
+
+/*
+ * Controls rate at which memory target (this iteration) approaches
+ * ultimate goal when memory need is increasing (up-hysteresis) or
+ * decreasing (down-hysteresis). Higher values of hysteresis cause
+ * slower increases/decreases. The default values for the various
+ * parameters were deemed reasonable by experimentation, may be
+ * workload-dependent, and can all be adjusted via sysfs.
+ */
+static unsigned int selfballoon_downhysteresis __read_mostly = 8;
+static unsigned int selfballoon_uphysteresis __read_mostly = 1;
+
+/* In HZ, controls frequency of worker invocation. */
+static unsigned int selfballoon_interval __read_mostly = 5;
+
+/*
+ * Minimum usable RAM in MB for selfballooning target for balloon.
+ * If non-zero, it is added to totalreserve_pages and self-ballooning
+ * will not balloon below the sum.  If zero, a piecewise linear function
+ * is calculated as a minimum and added to totalreserve_pages.  Note that
+ * setting this value indiscriminately may cause OOMs and crashes.
+ */
+static unsigned int selfballoon_min_usable_mb;
+
+/*
+ * Amount of RAM in MB to add to the target number of pages.
+ * Can be used to reserve some more room for caches and the like.
+ */
+static unsigned int selfballoon_reserved_mb;
+
+static void selfballoon_process(struct work_struct *work);
+static DECLARE_DELAYED_WORK(selfballoon_worker, selfballoon_process);
+
+#ifdef CONFIG_FRONTSWAP
+#include <linux/frontswap.h>
+
+/* Enable/disable with sysfs. */
+static bool frontswap_selfshrinking __read_mostly;
+
+/*
+ * The default values for the following parameters were deemed reasonable
+ * by experimentation, may be workload-dependent, and can all be
+ * adjusted via sysfs.
+ */
+
+/* Control rate for frontswap shrinking. Higher hysteresis is slower. */
+static unsigned int frontswap_hysteresis __read_mostly = 20;
+
+/*
+ * Number of selfballoon worker invocations to wait before observing that
+ * frontswap selfshrinking should commence. Note that selfshrinking does
+ * not use a separate worker thread.
+ */
+static unsigned int frontswap_inertia __read_mostly = 3;
+
+/* Countdown to next invocation of frontswap_shrink() */
+static unsigned long frontswap_inertia_counter;
+
+/*
+ * Invoked by the selfballoon worker thread, uses current number of pages
+ * in frontswap (frontswap_curr_pages()), previous status, and control
+ * values (hysteresis and inertia) to determine if frontswap should be
+ * shrunk and what the new frontswap size should be.  Note that
+ * frontswap_shrink is essentially a partial swapoff that immediately
+ * transfers pages from the "swap device" (frontswap) back into kernel
+ * RAM; despite the name, frontswap "shrinking" is very different from
+ * the "shrinker" interface used by the kernel MM subsystem to reclaim
+ * memory.
+ */
+static void frontswap_selfshrink(void)
+{
+	static unsigned long cur_frontswap_pages;
+	static unsigned long last_frontswap_pages;
+	static unsigned long tgt_frontswap_pages;
+
+	last_frontswap_pages = cur_frontswap_pages;
+	cur_frontswap_pages = frontswap_curr_pages();
+	if (!cur_frontswap_pages ||
+			(cur_frontswap_pages > last_frontswap_pages)) {
+		frontswap_inertia_counter = frontswap_inertia;
+		return;
+	}
+	if (frontswap_inertia_counter && --frontswap_inertia_counter)
+		return;
+	if (cur_frontswap_pages <= frontswap_hysteresis)
+		tgt_frontswap_pages = 0;
+	else
+		tgt_frontswap_pages = cur_frontswap_pages -
+			(cur_frontswap_pages / frontswap_hysteresis);
+	frontswap_shrink(tgt_frontswap_pages);
+	frontswap_inertia_counter = frontswap_inertia;
+}
+
+#endif /* CONFIG_FRONTSWAP */
+
+#define MB2PAGES(mb)	((mb) << (20 - PAGE_SHIFT))
+#define PAGES2MB(pages) ((pages) >> (20 - PAGE_SHIFT))
+
+/*
+ * Use current balloon size, the goal (vm_committed_as), and hysteresis
+ * parameters to set a new target balloon size
+ */
+static void selfballoon_process(struct work_struct *work)
+{
+	unsigned long cur_pages, goal_pages, tgt_pages, floor_pages;
+	unsigned long useful_pages;
+	bool reset_timer = false;
+
+	if (xen_selfballooning_enabled) {
+		cur_pages = totalram_pages;
+		tgt_pages = cur_pages; /* default is no change */
+		goal_pages = vm_memory_committed() +
+				totalreserve_pages +
+				MB2PAGES(selfballoon_reserved_mb);
+#ifdef CONFIG_FRONTSWAP
+		/* allow space for frontswap pages to be repatriated */
+		if (frontswap_selfshrinking && frontswap_enabled)
+			goal_pages += frontswap_curr_pages();
+#endif
+		if (cur_pages > goal_pages)
+			tgt_pages = cur_pages -
+				((cur_pages - goal_pages) /
+				  selfballoon_downhysteresis);
+		else if (cur_pages < goal_pages)
+			tgt_pages = cur_pages +
+				((goal_pages - cur_pages) /
+				  selfballoon_uphysteresis);
+		/* else if cur_pages == goal_pages, no change */
+		useful_pages = max_pfn - totalreserve_pages;
+		if (selfballoon_min_usable_mb != 0)
+			floor_pages = totalreserve_pages +
+					MB2PAGES(selfballoon_min_usable_mb);
+		/* piecewise linear function ending in ~3% slope */
+		else if (useful_pages < MB2PAGES(16))
+			floor_pages = max_pfn; /* not worth ballooning */
+		else if (useful_pages < MB2PAGES(64))
+			floor_pages = totalreserve_pages + MB2PAGES(16) +
+					((useful_pages - MB2PAGES(16)) >> 1);
+		else if (useful_pages < MB2PAGES(512))
+			floor_pages = totalreserve_pages + MB2PAGES(40) +
+					((useful_pages - MB2PAGES(40)) >> 3);
+		else /* useful_pages >= MB2PAGES(512) */
+			floor_pages = totalreserve_pages + MB2PAGES(99) +
+					((useful_pages - MB2PAGES(99)) >> 5);
+		if (tgt_pages < floor_pages)
+			tgt_pages = floor_pages;
+		balloon_set_new_target(tgt_pages +
+			balloon_stats.current_pages - totalram_pages);
+		reset_timer = true;
+	}
+#ifdef CONFIG_FRONTSWAP
+	if (frontswap_selfshrinking && frontswap_enabled) {
+		frontswap_selfshrink();
+		reset_timer = true;
+	}
+#endif
+	if (reset_timer)
+		schedule_delayed_work(&selfballoon_worker,
+			selfballoon_interval * HZ);
+}
+
+#ifdef CONFIG_SYSFS
+
+#include <linux/capability.h>
+
+#define SELFBALLOON_SHOW(name, format, args...)				\
+	static ssize_t show_##name(struct device *dev,	\
+					  struct device_attribute *attr, \
+					  char *buf) \
+	{ \
+		return sprintf(buf, format, ##args); \
+	}
+
+SELFBALLOON_SHOW(selfballooning, "%d\n", xen_selfballooning_enabled);
+
+static ssize_t store_selfballooning(struct device *dev,
+			    struct device_attribute *attr,
+			    const char *buf,
+			    size_t count)
+{
+	bool was_enabled = xen_selfballooning_enabled;
+	unsigned long tmp;
+	int err;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+
+	err = kstrtoul(buf, 10, &tmp);
+	if (err)
+		return err;
+	if ((tmp != 0) && (tmp != 1))
+		return -EINVAL;
+
+	xen_selfballooning_enabled = !!tmp;
+	if (!was_enabled && xen_selfballooning_enabled)
+		schedule_delayed_work(&selfballoon_worker,
+			selfballoon_interval * HZ);
+
+	return count;
+}
+
+static DEVICE_ATTR(selfballooning, S_IRUGO | S_IWUSR,
+		   show_selfballooning, store_selfballooning);
+
+SELFBALLOON_SHOW(selfballoon_interval, "%d\n", selfballoon_interval);
+
+static ssize_t store_selfballoon_interval(struct device *dev,
+					  struct device_attribute *attr,
+					  const char *buf,
+					  size_t count)
+{
+	unsigned long val;
+	int err;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+	err = kstrtoul(buf, 10, &val);
+	if (err)
+		return err;
+	if (val == 0)
+		return -EINVAL;
+	selfballoon_interval = val;
+	return count;
+}
+
+static DEVICE_ATTR(selfballoon_interval, S_IRUGO | S_IWUSR,
+		   show_selfballoon_interval, store_selfballoon_interval);
+
+SELFBALLOON_SHOW(selfballoon_downhys, "%d\n", selfballoon_downhysteresis);
+
+static ssize_t store_selfballoon_downhys(struct device *dev,
+					 struct device_attribute *attr,
+					 const char *buf,
+					 size_t count)
+{
+	unsigned long val;
+	int err;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+	err = kstrtoul(buf, 10, &val);
+	if (err)
+		return err;
+	if (val == 0)
+		return -EINVAL;
+	selfballoon_downhysteresis = val;
+	return count;
+}
+
+static DEVICE_ATTR(selfballoon_downhysteresis, S_IRUGO | S_IWUSR,
+		   show_selfballoon_downhys, store_selfballoon_downhys);
+
+
+SELFBALLOON_SHOW(selfballoon_uphys, "%d\n", selfballoon_uphysteresis);
+
+static ssize_t store_selfballoon_uphys(struct device *dev,
+				       struct device_attribute *attr,
+				       const char *buf,
+				       size_t count)
+{
+	unsigned long val;
+	int err;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+	err = kstrtoul(buf, 10, &val);
+	if (err)
+		return err;
+	if (val == 0)
+		return -EINVAL;
+	selfballoon_uphysteresis = val;
+	return count;
+}
+
+static DEVICE_ATTR(selfballoon_uphysteresis, S_IRUGO | S_IWUSR,
+		   show_selfballoon_uphys, store_selfballoon_uphys);
+
+SELFBALLOON_SHOW(selfballoon_min_usable_mb, "%d\n",
+				selfballoon_min_usable_mb);
+
+static ssize_t store_selfballoon_min_usable_mb(struct device *dev,
+					       struct device_attribute *attr,
+					       const char *buf,
+					       size_t count)
+{
+	unsigned long val;
+	int err;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+	err = kstrtoul(buf, 10, &val);
+	if (err)
+		return err;
+	if (val == 0)
+		return -EINVAL;
+	selfballoon_min_usable_mb = val;
+	return count;
+}
+
+static DEVICE_ATTR(selfballoon_min_usable_mb, S_IRUGO | S_IWUSR,
+		   show_selfballoon_min_usable_mb,
+		   store_selfballoon_min_usable_mb);
+
+SELFBALLOON_SHOW(selfballoon_reserved_mb, "%d\n",
+				selfballoon_reserved_mb);
+
+static ssize_t store_selfballoon_reserved_mb(struct device *dev,
+					     struct device_attribute *attr,
+					     const char *buf,
+					     size_t count)
+{
+	unsigned long val;
+	int err;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+	err = kstrtoul(buf, 10, &val);
+	if (err)
+		return err;
+	if (val == 0)
+		return -EINVAL;
+	selfballoon_reserved_mb = val;
+	return count;
+}
+
+static DEVICE_ATTR(selfballoon_reserved_mb, S_IRUGO | S_IWUSR,
+		   show_selfballoon_reserved_mb,
+		   store_selfballoon_reserved_mb);
+
+
+#ifdef CONFIG_FRONTSWAP
+SELFBALLOON_SHOW(frontswap_selfshrinking, "%d\n", frontswap_selfshrinking);
+
+static ssize_t store_frontswap_selfshrinking(struct device *dev,
+					     struct device_attribute *attr,
+					     const char *buf,
+					     size_t count)
+{
+	bool was_enabled = frontswap_selfshrinking;
+	unsigned long tmp;
+	int err;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+	err = kstrtoul(buf, 10, &tmp);
+	if (err)
+		return err;
+	if ((tmp != 0) && (tmp != 1))
+		return -EINVAL;
+	frontswap_selfshrinking = !!tmp;
+	if (!was_enabled && !xen_selfballooning_enabled &&
+	     frontswap_selfshrinking)
+		schedule_delayed_work(&selfballoon_worker,
+			selfballoon_interval * HZ);
+
+	return count;
+}
+
+static DEVICE_ATTR(frontswap_selfshrinking, S_IRUGO | S_IWUSR,
+		   show_frontswap_selfshrinking, store_frontswap_selfshrinking);
+
+SELFBALLOON_SHOW(frontswap_inertia, "%d\n", frontswap_inertia);
+
+static ssize_t store_frontswap_inertia(struct device *dev,
+				       struct device_attribute *attr,
+				       const char *buf,
+				       size_t count)
+{
+	unsigned long val;
+	int err;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+	err = kstrtoul(buf, 10, &val);
+	if (err)
+		return err;
+	if (val == 0)
+		return -EINVAL;
+	frontswap_inertia = val;
+	frontswap_inertia_counter = val;
+	return count;
+}
+
+static DEVICE_ATTR(frontswap_inertia, S_IRUGO | S_IWUSR,
+		   show_frontswap_inertia, store_frontswap_inertia);
+
+SELFBALLOON_SHOW(frontswap_hysteresis, "%d\n", frontswap_hysteresis);
+
+static ssize_t store_frontswap_hysteresis(struct device *dev,
+					  struct device_attribute *attr,
+					  const char *buf,
+					  size_t count)
+{
+	unsigned long val;
+	int err;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+	err = kstrtoul(buf, 10, &val);
+	if (err)
+		return err;
+	if (val == 0)
+		return -EINVAL;
+	frontswap_hysteresis = val;
+	return count;
+}
+
+static DEVICE_ATTR(frontswap_hysteresis, S_IRUGO | S_IWUSR,
+		   show_frontswap_hysteresis, store_frontswap_hysteresis);
+
+#endif /* CONFIG_FRONTSWAP */
+
+static struct attribute *selfballoon_attrs[] = {
+	&dev_attr_selfballooning.attr,
+	&dev_attr_selfballoon_interval.attr,
+	&dev_attr_selfballoon_downhysteresis.attr,
+	&dev_attr_selfballoon_uphysteresis.attr,
+	&dev_attr_selfballoon_min_usable_mb.attr,
+	&dev_attr_selfballoon_reserved_mb.attr,
+#ifdef CONFIG_FRONTSWAP
+	&dev_attr_frontswap_selfshrinking.attr,
+	&dev_attr_frontswap_hysteresis.attr,
+	&dev_attr_frontswap_inertia.attr,
+#endif
+	NULL
+};
+
+static const struct attribute_group selfballoon_group = {
+	.name = "selfballoon",
+	.attrs = selfballoon_attrs
+};
+#endif
+
+int register_xen_selfballooning(struct device *dev)
+{
+	int error = -1;
+
+#ifdef CONFIG_SYSFS
+	error = sysfs_create_group(&dev->kobj, &selfballoon_group);
+#endif
+	return error;
+}
+EXPORT_SYMBOL(register_xen_selfballooning);
+
+int xen_selfballoon_init(bool use_selfballooning, bool use_frontswap_selfshrink)
+{
+	bool enable = false;
+	unsigned long reserve_pages;
+
+	if (!xen_domain())
+		return -ENODEV;
+
+	if (xen_initial_domain()) {
+		pr_info("Xen selfballooning driver disabled for domain0\n");
+		return -ENODEV;
+	}
+
+	xen_selfballooning_enabled = tmem_enabled && use_selfballooning;
+	if (xen_selfballooning_enabled) {
+		pr_info("Initializing Xen selfballooning driver\n");
+		enable = true;
+	}
+#ifdef CONFIG_FRONTSWAP
+	frontswap_selfshrinking = tmem_enabled && use_frontswap_selfshrink;
+	if (frontswap_selfshrinking) {
+		pr_info("Initializing frontswap selfshrinking driver\n");
+		enable = true;
+	}
+#endif
+	if (!enable)
+		return -ENODEV;
+
+	/*
+	 * Give selfballoon_reserved_mb a default value(10% of total ram pages)
+	 * to make selfballoon not so aggressive.
+	 *
+	 * There are mainly two reasons:
+	 * 1) The original goal_page didn't consider some pages used by kernel
+	 *    space, like slab pages and memory used by device drivers.
+	 *
+	 * 2) The balloon driver may not give back memory to guest OS fast
+	 *    enough when the workload suddenly aquries a lot of physical memory.
+	 *
+	 * In both cases, the guest OS will suffer from memory pressure and
+	 * OOM killer may be triggered.
+	 * By reserving extra 10% of total ram pages, we can keep the system
+	 * much more reliably and response faster in some cases.
+	 */
+	if (!selfballoon_reserved_mb) {
+		reserve_pages = totalram_pages / 10;
+		selfballoon_reserved_mb = PAGES2MB(reserve_pages);
+	}
+	schedule_delayed_work(&selfballoon_worker, selfballoon_interval * HZ);
+
+	return 0;
+}
+EXPORT_SYMBOL(xen_selfballoon_init);