summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/video/fbdev/Kconfig
diff options
context:
space:
mode:
authorYunhong Jiang <yunhong.jiang@intel.com>2015-08-04 12:17:53 -0700
committerYunhong Jiang <yunhong.jiang@intel.com>2015-08-04 15:44:42 -0700
commit9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 (patch)
tree1c9cafbcd35f783a87880a10f85d1a060db1a563 /kernel/drivers/video/fbdev/Kconfig
parent98260f3884f4a202f9ca5eabed40b1354c489b29 (diff)
Add the rt linux 4.1.3-rt3 as base
Import the rt linux 4.1.3-rt3 as OPNFV kvm base. It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and the base is: commit 0917f823c59692d751951bf5ea699a2d1e2f26a2 Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Date: Sat Jul 25 12:13:34 2015 +0200 Prepare v4.1.3-rt3 Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> We lose all the git history this way and it's not good. We should apply another opnfv project repo in future. Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423 Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>
Diffstat (limited to 'kernel/drivers/video/fbdev/Kconfig')
-rw-r--r--kernel/drivers/video/fbdev/Kconfig2483
1 files changed, 2483 insertions, 0 deletions
diff --git a/kernel/drivers/video/fbdev/Kconfig b/kernel/drivers/video/fbdev/Kconfig
new file mode 100644
index 000000000..109462303
--- /dev/null
+++ b/kernel/drivers/video/fbdev/Kconfig
@@ -0,0 +1,2483 @@
+#
+# fbdev configuration
+#
+
+menuconfig FB
+ tristate "Support for frame buffer devices"
+ select FB_CMDLINE
+ ---help---
+ The frame buffer device provides an abstraction for the graphics
+ hardware. It represents the frame buffer of some video hardware and
+ allows application software to access the graphics hardware through
+ a well-defined interface, so the software doesn't need to know
+ anything about the low-level (hardware register) stuff.
+
+ Frame buffer devices work identically across the different
+ architectures supported by Linux and make the implementation of
+ application programs easier and more portable; at this point, an X
+ server exists which uses the frame buffer device exclusively.
+ On several non-X86 architectures, the frame buffer device is the
+ only way to use the graphics hardware.
+
+ The device is accessed through special device nodes, usually located
+ in the /dev directory, i.e. /dev/fb*.
+
+ You need an utility program called fbset to make full use of frame
+ buffer devices. Please read <file:Documentation/fb/framebuffer.txt>
+ and the Framebuffer-HOWTO at
+ <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.3.html> for more
+ information.
+
+ Say Y here and to the driver for your graphics board below if you
+ are compiling a kernel for a non-x86 architecture.
+
+ If you are compiling for the x86 architecture, you can say Y if you
+ want to play with it, but it is not essential. Please note that
+ running graphical applications that directly touch the hardware
+ (e.g. an accelerated X server) and that are not frame buffer
+ device-aware may cause unexpected results. If unsure, say N.
+
+config FIRMWARE_EDID
+ bool "Enable firmware EDID"
+ depends on FB
+ default n
+ ---help---
+ This enables access to the EDID transferred from the firmware.
+ On the i386, this is from the Video BIOS. Enable this if DDC/I2C
+ transfers do not work for your driver and if you are using
+ nvidiafb, i810fb or savagefb.
+
+ In general, choosing Y for this option is safe. If you
+ experience extremely long delays while booting before you get
+ something on your display, try setting this to N. Matrox cards in
+ combination with certain motherboards and monitors are known to
+ suffer from this problem.
+
+config FB_CMDLINE
+ bool
+
+config FB_DDC
+ tristate
+ depends on FB
+ select I2C_ALGOBIT
+ select I2C
+ default n
+
+config FB_BOOT_VESA_SUPPORT
+ bool
+ depends on FB
+ default n
+ ---help---
+ If true, at least one selected framebuffer driver can take advantage
+ of VESA video modes set at an early boot stage via the vga= parameter.
+
+config FB_CFB_FILLRECT
+ tristate
+ depends on FB
+ default n
+ ---help---
+ Include the cfb_fillrect function for generic software rectangle
+ filling. This is used by drivers that don't provide their own
+ (accelerated) version.
+
+config FB_CFB_COPYAREA
+ tristate
+ depends on FB
+ default n
+ ---help---
+ Include the cfb_copyarea function for generic software area copying.
+ This is used by drivers that don't provide their own (accelerated)
+ version.
+
+config FB_CFB_IMAGEBLIT
+ tristate
+ depends on FB
+ default n
+ ---help---
+ Include the cfb_imageblit function for generic software image
+ blitting. This is used by drivers that don't provide their own
+ (accelerated) version.
+
+config FB_CFB_REV_PIXELS_IN_BYTE
+ bool
+ depends on FB
+ default n
+ ---help---
+ Allow generic frame-buffer functions to work on displays with 1, 2
+ and 4 bits per pixel depths which has opposite order of pixels in
+ byte order to bytes in long order.
+
+config FB_SYS_FILLRECT
+ tristate
+ depends on FB
+ default n
+ ---help---
+ Include the sys_fillrect function for generic software rectangle
+ filling. This is used by drivers that don't provide their own
+ (accelerated) version and the framebuffer is in system RAM.
+
+config FB_SYS_COPYAREA
+ tristate
+ depends on FB
+ default n
+ ---help---
+ Include the sys_copyarea function for generic software area copying.
+ This is used by drivers that don't provide their own (accelerated)
+ version and the framebuffer is in system RAM.
+
+config FB_SYS_IMAGEBLIT
+ tristate
+ depends on FB
+ default n
+ ---help---
+ Include the sys_imageblit function for generic software image
+ blitting. This is used by drivers that don't provide their own
+ (accelerated) version and the framebuffer is in system RAM.
+
+menuconfig FB_FOREIGN_ENDIAN
+ bool "Framebuffer foreign endianness support"
+ depends on FB
+ ---help---
+ This menu will let you enable support for the framebuffers with
+ non-native endianness (e.g. Little-Endian framebuffer on a
+ Big-Endian machine). Most probably you don't have such hardware,
+ so it's safe to say "n" here.
+
+choice
+ prompt "Choice endianness support"
+ depends on FB_FOREIGN_ENDIAN
+
+config FB_BOTH_ENDIAN
+ bool "Support for Big- and Little-Endian framebuffers"
+
+config FB_BIG_ENDIAN
+ bool "Support for Big-Endian framebuffers only"
+
+config FB_LITTLE_ENDIAN
+ bool "Support for Little-Endian framebuffers only"
+
+endchoice
+
+config FB_SYS_FOPS
+ tristate
+ depends on FB
+ default n
+
+config FB_DEFERRED_IO
+ bool
+ depends on FB
+
+config FB_HECUBA
+ tristate
+ depends on FB
+ depends on FB_DEFERRED_IO
+
+config FB_SVGALIB
+ tristate
+ depends on FB
+ default n
+ ---help---
+ Common utility functions useful to fbdev drivers of VGA-based
+ cards.
+
+config FB_MACMODES
+ tristate
+ depends on FB
+ default n
+
+config FB_BACKLIGHT
+ bool
+ depends on FB
+ select BACKLIGHT_LCD_SUPPORT
+ select BACKLIGHT_CLASS_DEVICE
+ default n
+
+config FB_MODE_HELPERS
+ bool "Enable Video Mode Handling Helpers"
+ depends on FB
+ default n
+ ---help---
+ This enables functions for handling video modes using the
+ Generalized Timing Formula and the EDID parser. A few drivers rely
+ on this feature such as the radeonfb, rivafb, and the i810fb. If
+ your driver does not take advantage of this feature, choosing Y will
+ just increase the kernel size by about 5K.
+
+config FB_TILEBLITTING
+ bool "Enable Tile Blitting Support"
+ depends on FB
+ default n
+ ---help---
+ This enables tile blitting. Tile blitting is a drawing technique
+ where the screen is divided into rectangular sections (tiles), whereas
+ the standard blitting divides the screen into pixels. Because the
+ default drawing element is a tile, drawing functions will be passed
+ parameters in terms of number of tiles instead of number of pixels.
+ For example, to draw a single character, instead of using bitmaps,
+ an index to an array of bitmaps will be used. To clear or move a
+ rectangular section of a screen, the rectangle will be described in
+ terms of number of tiles in the x- and y-axis.
+
+ This is particularly important to one driver, matroxfb. If
+ unsure, say N.
+
+comment "Frame buffer hardware drivers"
+ depends on FB
+
+config FB_GRVGA
+ tristate "Aeroflex Gaisler framebuffer support"
+ depends on FB && SPARC
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ This enables support for the SVGACTRL framebuffer in the GRLIB IP library from Aeroflex Gaisler.
+
+config FB_CIRRUS
+ tristate "Cirrus Logic support"
+ depends on FB && (ZORRO || PCI)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ This enables support for Cirrus Logic GD542x/543x based boards on
+ Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum.
+
+ If you have a PCI-based system, this enables support for these
+ chips: GD-543x, GD-544x, GD-5480.
+
+ Please read the file <file:Documentation/fb/cirrusfb.txt>.
+
+ Say N unless you have such a graphics board or plan to get one
+ before you next recompile the kernel.
+
+config FB_PM2
+ tristate "Permedia2 support"
+ depends on FB && ((AMIGA && BROKEN) || PCI)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for cards based on
+ the 3D Labs Permedia, Permedia 2 and Permedia 2V chips.
+ The driver was tested on the following cards:
+ Diamond FireGL 1000 PRO AGP
+ ELSA Gloria Synergy PCI
+ Appian Jeronimo PRO (both heads) PCI
+ 3DLabs Oxygen ACX aka EONtronics Picasso P2 PCI
+ Techsource Raptor GFX-8P (aka Sun PGX-32) on SPARC
+ ASK Graphic Blaster Exxtreme AGP
+
+ To compile this driver as a module, choose M here: the
+ module will be called pm2fb.
+
+config FB_PM2_FIFO_DISCONNECT
+ bool "enable FIFO disconnect feature"
+ depends on FB_PM2 && PCI
+ help
+ Support the Permedia2 FIFO disconnect feature.
+
+config FB_ARMCLCD
+ tristate "ARM PrimeCell PL110 support"
+ depends on ARM || ARM64 || COMPILE_TEST
+ depends on FB && ARM_AMBA
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_MODE_HELPERS if OF
+ select VIDEOMODE_HELPERS if OF
+ help
+ This framebuffer device driver is for the ARM PrimeCell PL110
+ Colour LCD controller. ARM PrimeCells provide the building
+ blocks for System on a Chip devices.
+
+ If you want to compile this as a module (=code which can be
+ inserted into and removed from the running kernel), say M
+ here and read <file:Documentation/kbuild/modules.txt>. The module
+ will be called amba-clcd.
+
+# Helper logic selected only by the ARM Versatile platform family.
+config PLAT_VERSATILE_CLCD
+ def_bool ARCH_VERSATILE || ARCH_REALVIEW || ARCH_VEXPRESS
+ depends on ARM
+ depends on FB_ARMCLCD && FB=y
+
+config FB_ACORN
+ bool "Acorn VIDC support"
+ depends on (FB = y) && ARM && ARCH_ACORN
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the Acorn VIDC graphics
+ hardware found in Acorn RISC PCs and other ARM-based machines. If
+ unsure, say N.
+
+config FB_CLPS711X_OLD
+ tristate
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+
+config FB_CLPS711X
+ tristate "CLPS711X LCD support"
+ depends on FB && (ARCH_CLPS711X || COMPILE_TEST)
+ select FB_CLPS711X_OLD if ARCH_CLPS711X && !ARCH_MULTIPLATFORM
+ select BACKLIGHT_LCD_SUPPORT
+ select FB_MODE_HELPERS
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select LCD_CLASS_DEVICE
+ select VIDEOMODE_HELPERS
+ help
+ Say Y to enable the Framebuffer driver for the Cirrus Logic
+ CLPS711X CPUs.
+
+config FB_SA1100
+ bool "SA-1100 LCD support"
+ depends on (FB = y) && ARM && ARCH_SA1100
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is a framebuffer device for the SA-1100 LCD Controller.
+ See <http://www.linux-fbdev.org/> for information on framebuffer
+ devices.
+
+ If you plan to use the LCD display with your SA-1100 system, say
+ Y here.
+
+config FB_IMX
+ tristate "Freescale i.MX1/21/25/27 LCD support"
+ depends on FB && ARCH_MXC
+ select BACKLIGHT_LCD_SUPPORT
+ select LCD_CLASS_DEVICE
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_MODE_HELPERS
+ select VIDEOMODE_HELPERS
+
+config FB_CYBER2000
+ tristate "CyberPro 2000/2010/5000 support"
+ depends on FB && PCI && (BROKEN || !SPARC64)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This enables support for the Integraphics CyberPro 20x0 and 5000
+ VGA chips used in the Rebel.com Netwinder and other machines.
+ Say Y if you have a NetWinder or a graphics card containing this
+ device, otherwise say N.
+
+config FB_CYBER2000_DDC
+ bool "DDC for CyberPro support"
+ depends on FB_CYBER2000
+ select FB_DDC
+ default y
+ help
+ Say Y here if you want DDC support for your CyberPro graphics
+ card. This is only I2C bus support, driver does not use EDID.
+
+config FB_CYBER2000_I2C
+ bool "CyberPro 2000/2010/5000 I2C support"
+ depends on FB_CYBER2000 && I2C && ARCH_NETWINDER
+ depends on I2C=y || FB_CYBER2000=m
+ select I2C_ALGOBIT
+ help
+ Enable support for the I2C video decoder interface on the
+ Integraphics CyberPro 20x0 and 5000 VGA chips. This is used
+ on the Netwinder machines for the SAA7111 video capture.
+
+config FB_APOLLO
+ bool
+ depends on (FB = y) && APOLLO
+ default y
+ select FB_CFB_FILLRECT
+ select FB_CFB_IMAGEBLIT
+
+config FB_Q40
+ bool
+ depends on (FB = y) && Q40
+ default y
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+
+config FB_AMIGA
+ tristate "Amiga native chipset support"
+ depends on FB && AMIGA
+ help
+ This is the frame buffer device driver for the builtin graphics
+ chipset found in Amigas.
+
+ To compile this driver as a module, choose M here: the
+ module will be called amifb.
+
+config FB_AMIGA_OCS
+ bool "Amiga OCS chipset support"
+ depends on FB_AMIGA
+ help
+ This enables support for the original Agnus and Denise video chips,
+ found in the Amiga 1000 and most A500's and A2000's. If you intend
+ to run Linux on any of these systems, say Y; otherwise say N.
+
+config FB_AMIGA_ECS
+ bool "Amiga ECS chipset support"
+ depends on FB_AMIGA
+ help
+ This enables support for the Enhanced Chip Set, found in later
+ A500's, later A2000's, the A600, the A3000, the A3000T and CDTV. If
+ you intend to run Linux on any of these systems, say Y; otherwise
+ say N.
+
+config FB_AMIGA_AGA
+ bool "Amiga AGA chipset support"
+ depends on FB_AMIGA
+ help
+ This enables support for the Advanced Graphics Architecture (also
+ known as the AGA or AA) Chip Set, found in the A1200, A4000, A4000T
+ and CD32. If you intend to run Linux on any of these systems, say Y;
+ otherwise say N.
+
+config FB_FM2
+ bool "Amiga FrameMaster II/Rainbow II support"
+ depends on (FB = y) && ZORRO
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the Amiga FrameMaster
+ card from BSC (exhibited 1992 but not shipped as a CBM product).
+
+config FB_ARC
+ tristate "Arc Monochrome LCD board support"
+ depends on FB && X86
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
+ help
+ This enables support for the Arc Monochrome LCD board. The board
+ is based on the KS-108 lcd controller and is typically a matrix
+ of 2*n chips. This driver was tested with a 128x64 panel. This
+ driver supports it for use with x86 SBCs through a 16 bit GPIO
+ interface (8 bit data, 8 bit control). If you anticipate using
+ this driver, say Y or M; otherwise say N. You must specify the
+ GPIO IO address to be used for setting control and data.
+
+config FB_ATARI
+ bool "Atari native chipset support"
+ depends on (FB = y) && ATARI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the builtin graphics
+ chipset found in Ataris.
+
+config FB_OF
+ bool "Open Firmware frame buffer device support"
+ depends on (FB = y) && PPC && (!PPC_PSERIES || PCI)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_MACMODES
+ help
+ Say Y if you want support with Open Firmware for your graphics
+ board.
+
+config FB_CONTROL
+ bool "Apple \"control\" display support"
+ depends on (FB = y) && PPC_PMAC && PPC32
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_MACMODES
+ help
+ This driver supports a frame buffer for the graphics adapter in the
+ Power Macintosh 7300 and others.
+
+config FB_PLATINUM
+ bool "Apple \"platinum\" display support"
+ depends on (FB = y) && PPC_PMAC && PPC32
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_MACMODES
+ help
+ This driver supports a frame buffer for the "platinum" graphics
+ adapter in some Power Macintoshes.
+
+config FB_VALKYRIE
+ bool "Apple \"valkyrie\" display support"
+ depends on (FB = y) && (MAC || (PPC_PMAC && PPC32))
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_MACMODES
+ help
+ This driver supports a frame buffer for the "valkyrie" graphics
+ adapter in some Power Macintoshes.
+
+config FB_CT65550
+ bool "Chips 65550 display support"
+ depends on (FB = y) && PPC32 && PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the Chips & Technologies
+ 65550 graphics chip in PowerBooks.
+
+config FB_ASILIANT
+ bool "Asiliant (Chips) 69000 display support"
+ depends on (FB = y) && PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the Asiliant 69030 chipset
+
+config FB_IMSTT
+ bool "IMS Twin Turbo display support"
+ depends on (FB = y) && PCI
+ select FB_CFB_IMAGEBLIT
+ select FB_MACMODES if PPC
+ help
+ The IMS Twin Turbo is a PCI-based frame buffer card bundled with
+ many Macintosh and compatible computers.
+
+config FB_VGA16
+ tristate "VGA 16-color graphics support"
+ depends on FB && (X86 || PPC)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select VGASTATE
+ select FONT_8x16 if FRAMEBUFFER_CONSOLE
+ help
+ This is the frame buffer device driver for VGA 16 color graphic
+ cards. Say Y if you have such a card.
+
+ To compile this driver as a module, choose M here: the
+ module will be called vga16fb.
+
+config FB_BF54X_LQ043
+ tristate "SHARP LQ043 TFT LCD (BF548 EZKIT)"
+ depends on FB && (BF54x) && !BF542
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the framebuffer device driver for a SHARP LQ043T1DG01 TFT LCD
+
+config FB_BFIN_T350MCQB
+ tristate "Varitronix COG-T350MCQB TFT LCD display (BF527 EZKIT)"
+ depends on FB && BLACKFIN
+ select BFIN_GPTIMERS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the framebuffer device driver for a Varitronix VL-PS-COG-T350MCQB-01 display TFT LCD
+ This display is a QVGA 320x240 24-bit RGB display interfaced by an 8-bit wide PPI
+ It uses PPI[0..7] PPI_FS1, PPI_FS2 and PPI_CLK.
+
+config FB_BFIN_LQ035Q1
+ tristate "SHARP LQ035Q1DH02 TFT LCD"
+ depends on FB && BLACKFIN && SPI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select BFIN_GPTIMERS
+ help
+ This is the framebuffer device driver for a SHARP LQ035Q1DH02 TFT display found on
+ the Blackfin Landscape LCD EZ-Extender Card.
+ This display is a QVGA 320x240 18-bit RGB display interfaced by an 16-bit wide PPI
+ It uses PPI[0..15] PPI_FS1, PPI_FS2 and PPI_CLK.
+
+ To compile this driver as a module, choose M here: the
+ module will be called bfin-lq035q1-fb.
+
+config FB_BF537_LQ035
+ tristate "SHARP LQ035 TFT LCD (BF537 STAMP)"
+ depends on FB && (BF534 || BF536 || BF537) && I2C_BLACKFIN_TWI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select BFIN_GPTIMERS
+ help
+ This is the framebuffer device for a SHARP LQ035Q7DB03 TFT LCD
+ attached to a BF537.
+
+ To compile this driver as a module, choose M here: the
+ module will be called bf537-lq035.
+
+config FB_BFIN_7393
+ tristate "Blackfin ADV7393 Video encoder"
+ depends on FB && BLACKFIN
+ select I2C
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the framebuffer device for a ADV7393 video encoder
+ attached to a Blackfin on the PPI port.
+ If your Blackfin board has a ADV7393 select Y.
+
+ To compile this driver as a module, choose M here: the
+ module will be called bfin_adv7393fb.
+
+choice
+ prompt "Video mode support"
+ depends on FB_BFIN_7393
+ default NTSC
+
+config NTSC
+ bool 'NTSC 720x480'
+
+config PAL
+ bool 'PAL 720x576'
+
+config NTSC_640x480
+ bool 'NTSC 640x480 (Experimental)'
+
+config PAL_640x480
+ bool 'PAL 640x480 (Experimental)'
+
+config NTSC_YCBCR
+ bool 'NTSC 720x480 YCbCR input'
+
+config PAL_YCBCR
+ bool 'PAL 720x576 YCbCR input'
+
+endchoice
+
+choice
+ prompt "Size of ADV7393 frame buffer memory Single/Double Size"
+ depends on (FB_BFIN_7393)
+ default ADV7393_1XMEM
+
+config ADV7393_1XMEM
+ bool 'Single'
+
+config ADV7393_2XMEM
+ bool 'Double'
+endchoice
+
+config FB_STI
+ tristate "HP STI frame buffer device support"
+ depends on FB && PARISC
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select STI_CONSOLE
+ select VT
+ default y
+ ---help---
+ STI refers to the HP "Standard Text Interface" which is a set of
+ BIOS routines contained in a ROM chip in HP PA-RISC based machines.
+ Enabling this option will implement the linux framebuffer device
+ using calls to the STI BIOS routines for initialisation.
+
+ If you enable this option, you will get a planar framebuffer device
+ /dev/fb which will work on the most common HP graphic cards of the
+ NGLE family, including the artist chips (in the 7xx and Bxxx series),
+ HCRX, HCRX24, CRX, CRX24 and VisEG series.
+
+ It is safe to enable this option, so you should probably say "Y".
+
+config FB_MAC
+ bool "Generic Macintosh display support"
+ depends on (FB = y) && MAC
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_MACMODES
+
+config FB_HP300
+ bool
+ depends on (FB = y) && DIO
+ select FB_CFB_IMAGEBLIT
+ default y
+
+config FB_TGA
+ tristate "TGA/SFB+ framebuffer support"
+ depends on FB && (ALPHA || TC)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select BITREVERSE
+ ---help---
+ This is the frame buffer device driver for generic TGA and SFB+
+ graphic cards. These include DEC ZLXp-E1, -E2 and -E3 PCI cards,
+ also known as PBXGA-A, -B and -C, and DEC ZLX-E1, -E2 and -E3
+ TURBOchannel cards, also known as PMAGD-A, -B and -C.
+
+ Due to hardware limitations ZLX-E2 and E3 cards are not supported
+ for DECstation 5000/200 systems. Additionally due to firmware
+ limitations these cards may cause troubles with booting DECstation
+ 5000/240 and /260 systems, but are fully supported under Linux if
+ you manage to get it going. ;-)
+
+ Say Y if you have one of those.
+
+config FB_UVESA
+ tristate "Userspace VESA VGA graphics support"
+ depends on FB && CONNECTOR
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_MODE_HELPERS
+ help
+ This is the frame buffer driver for generic VBE 2.0 compliant
+ graphic cards. It can also take advantage of VBE 3.0 features,
+ such as refresh rate adjustment.
+
+ This driver generally provides more features than vesafb but
+ requires a userspace helper application called 'v86d'. See
+ <file:Documentation/fb/uvesafb.txt> for more information.
+
+ If unsure, say N.
+
+config FB_VESA
+ bool "VESA VGA graphics support"
+ depends on (FB = y) && X86
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_BOOT_VESA_SUPPORT
+ help
+ This is the frame buffer device driver for generic VESA 2.0
+ compliant graphic cards. The older VESA 1.2 cards are not supported.
+ You will get a boot time penguin logo at no additional cost. Please
+ read <file:Documentation/fb/vesafb.txt>. If unsure, say Y.
+
+config FB_EFI
+ bool "EFI-based Framebuffer Support"
+ depends on (FB = y) && X86 && EFI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the EFI frame buffer device driver. If the firmware on
+ your platform is EFI 1.10 or UEFI 2.0, select Y to add support for
+ using the EFI framebuffer as your console.
+
+config FB_N411
+ tristate "N411 Apollo/Hecuba devkit support"
+ depends on FB && X86 && MMU
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
+ select FB_DEFERRED_IO
+ select FB_HECUBA
+ help
+ This enables support for the Apollo display controller in its
+ Hecuba form using the n411 devkit.
+
+config FB_HGA
+ tristate "Hercules mono graphics support"
+ depends on FB && X86
+ help
+ Say Y here if you have a Hercules mono graphics card.
+
+ To compile this driver as a module, choose M here: the
+ module will be called hgafb.
+
+ As this card technology is at least 25 years old,
+ most people will answer N here.
+
+config FB_GBE
+ bool "SGI Graphics Backend frame buffer support"
+ depends on (FB = y) && SGI_IP32
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for SGI Graphics Backend.
+ This chip is used in SGI O2 and Visual Workstation 320/540.
+
+config FB_GBE_MEM
+ int "Video memory size in MB"
+ depends on FB_GBE
+ default 4
+ help
+ This is the amount of memory reserved for the framebuffer,
+ which can be any value between 1MB and 8MB.
+
+config FB_SBUS
+ bool "SBUS and UPA framebuffers"
+ depends on (FB = y) && SPARC
+ help
+ Say Y if you want support for SBUS or UPA based frame buffer device.
+
+config FB_BW2
+ bool "BWtwo support"
+ depends on (FB = y) && (SPARC && FB_SBUS)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the BWtwo frame buffer.
+
+config FB_CG3
+ bool "CGthree support"
+ depends on (FB = y) && (SPARC && FB_SBUS)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the CGthree frame buffer.
+
+config FB_CG6
+ bool "CGsix (GX,TurboGX) support"
+ depends on (FB = y) && (SPARC && FB_SBUS)
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the CGsix (GX, TurboGX)
+ frame buffer.
+
+config FB_FFB
+ bool "Creator/Creator3D/Elite3D support"
+ depends on FB_SBUS && SPARC64
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the Creator, Creator3D,
+ and Elite3D graphics boards.
+
+config FB_TCX
+ bool "TCX (SS4/SS5 only) support"
+ depends on FB_SBUS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the TCX 24/8bit frame
+ buffer.
+
+config FB_CG14
+ bool "CGfourteen (SX) support"
+ depends on FB_SBUS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the CGfourteen frame
+ buffer on Desktop SPARCsystems with the SX graphics option.
+
+config FB_P9100
+ bool "P9100 (Sparcbook 3 only) support"
+ depends on FB_SBUS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the P9100 card
+ supported on Sparcbook 3 machines.
+
+config FB_LEO
+ bool "Leo (ZX) support"
+ depends on FB_SBUS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the SBUS-based Sun ZX
+ (leo) frame buffer cards.
+
+config FB_IGA
+ bool "IGA 168x display support"
+ depends on (FB = y) && SPARC32
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the framebuffer device for the INTERGRAPHICS 1680 and
+ successor frame buffer cards.
+
+config FB_XVR500
+ bool "Sun XVR-500 3DLABS Wildcat support"
+ depends on (FB = y) && PCI && SPARC64
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the framebuffer device for the Sun XVR-500 and similar
+ graphics cards based upon the 3DLABS Wildcat chipset. The driver
+ only works on sparc64 systems where the system firmware has
+ mostly initialized the card already. It is treated as a
+ completely dumb framebuffer device.
+
+config FB_XVR2500
+ bool "Sun XVR-2500 3DLABS Wildcat support"
+ depends on (FB = y) && PCI && SPARC64
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the framebuffer device for the Sun XVR-2500 and similar
+ graphics cards based upon the 3DLABS Wildcat chipset. The driver
+ only works on sparc64 systems where the system firmware has
+ mostly initialized the card already. It is treated as a
+ completely dumb framebuffer device.
+
+config FB_XVR1000
+ bool "Sun XVR-1000 support"
+ depends on (FB = y) && SPARC64
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the framebuffer device for the Sun XVR-1000 and similar
+ graphics cards. The driver only works on sparc64 systems where
+ the system firmware has mostly initialized the card already. It
+ is treated as a completely dumb framebuffer device.
+
+config FB_PVR2
+ tristate "NEC PowerVR 2 display support"
+ depends on FB && SH_DREAMCAST
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Say Y here if you have a PowerVR 2 card in your box. If you plan to
+ run linux on your Dreamcast, you will have to say Y here.
+ This driver may or may not work on other PowerVR 2 cards, but is
+ totally untested. Use at your own risk. If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called pvr2fb.
+
+ You can pass several parameters to the driver at boot time or at
+ module load time. The parameters look like "video=pvr2:XXX", where
+ the meaning of XXX can be found at the end of the main source file
+ (<file:drivers/video/pvr2fb.c>). Please see the file
+ <file:Documentation/fb/pvr2fb.txt>.
+
+config FB_OPENCORES
+ tristate "OpenCores VGA/LCD core 2.0 framebuffer support"
+ depends on FB && HAS_DMA
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This enables support for the OpenCores VGA/LCD core.
+
+ The OpenCores VGA/LCD core is typically used together with
+ softcore CPUs (e.g. OpenRISC or Microblaze) or hard processor
+ systems (e.g. Altera socfpga or Xilinx Zynq) on FPGAs.
+
+ The source code and specification for the core is available at
+ <http://opencores.org/project,vga_lcd>
+
+config FB_S1D13XXX
+ tristate "Epson S1D13XXX framebuffer support"
+ depends on FB
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ Support for S1D13XXX framebuffer device family (currently only
+ working with S1D13806). Product specs at
+ <http://vdc.epson.com/>
+
+config FB_ATMEL
+ tristate "AT91/AT32 LCD Controller support"
+ depends on FB && HAVE_FB_ATMEL
+ select FB_BACKLIGHT
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_MODE_HELPERS
+ select VIDEOMODE_HELPERS
+ help
+ This enables support for the AT91/AT32 LCD Controller.
+
+config FB_NVIDIA
+ tristate "nVidia Framebuffer Support"
+ depends on FB && PCI
+ select FB_BACKLIGHT if FB_NVIDIA_BACKLIGHT
+ select FB_MODE_HELPERS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select BITREVERSE
+ select VGASTATE
+ help
+ This driver supports graphics boards with the nVidia chips, TNT
+ and newer. For very old chipsets, such as the RIVA128, then use
+ the rivafb.
+ Say Y if you have such a graphics board.
+
+ To compile this driver as a module, choose M here: the
+ module will be called nvidiafb.
+
+config FB_NVIDIA_I2C
+ bool "Enable DDC Support"
+ depends on FB_NVIDIA
+ select FB_DDC
+ help
+ This enables I2C support for nVidia Chipsets. This is used
+ only for getting EDID information from the attached display
+ allowing for robust video mode handling and switching.
+
+ Because fbdev-2.6 requires that drivers must be able to
+ independently validate video mode parameters, you should say Y
+ here.
+
+config FB_NVIDIA_DEBUG
+ bool "Lots of debug output"
+ depends on FB_NVIDIA
+ default n
+ help
+ Say Y here if you want the nVidia driver to output all sorts
+ of debugging information to provide to the maintainer when
+ something goes wrong.
+
+config FB_NVIDIA_BACKLIGHT
+ bool "Support for backlight control"
+ depends on FB_NVIDIA
+ default y
+ help
+ Say Y here if you want to control the backlight of your display.
+
+config FB_RIVA
+ tristate "nVidia Riva support"
+ depends on FB && PCI
+ select FB_BACKLIGHT if FB_RIVA_BACKLIGHT
+ select FB_MODE_HELPERS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select BITREVERSE
+ select VGASTATE
+ help
+ This driver supports graphics boards with the nVidia Riva/Geforce
+ chips.
+ Say Y if you have such a graphics board.
+
+ To compile this driver as a module, choose M here: the
+ module will be called rivafb.
+
+config FB_RIVA_I2C
+ bool "Enable DDC Support"
+ depends on FB_RIVA
+ select FB_DDC
+ help
+ This enables I2C support for nVidia Chipsets. This is used
+ only for getting EDID information from the attached display
+ allowing for robust video mode handling and switching.
+
+ Because fbdev-2.6 requires that drivers must be able to
+ independently validate video mode parameters, you should say Y
+ here.
+
+config FB_RIVA_DEBUG
+ bool "Lots of debug output"
+ depends on FB_RIVA
+ default n
+ help
+ Say Y here if you want the Riva driver to output all sorts
+ of debugging information to provide to the maintainer when
+ something goes wrong.
+
+config FB_RIVA_BACKLIGHT
+ bool "Support for backlight control"
+ depends on FB_RIVA
+ default y
+ help
+ Say Y here if you want to control the backlight of your display.
+
+config FB_I740
+ tristate "Intel740 support"
+ depends on FB && PCI
+ select FB_MODE_HELPERS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select VGASTATE
+ select FB_DDC
+ help
+ This driver supports graphics cards based on Intel740 chip.
+
+config FB_I810
+ tristate "Intel 810/815 support"
+ depends on FB && PCI && X86_32 && AGP_INTEL
+ select FB_MODE_HELPERS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select VGASTATE
+ help
+ This driver supports the on-board graphics built in to the Intel 810
+ and 815 chipsets. Say Y if you have and plan to use such a board.
+
+ To compile this driver as a module, choose M here: the
+ module will be called i810fb.
+
+ For more information, please read
+ <file:Documentation/fb/intel810.txt>
+
+config FB_I810_GTF
+ bool "use VESA Generalized Timing Formula"
+ depends on FB_I810
+ help
+ If you say Y, then the VESA standard, Generalized Timing Formula
+ or GTF, will be used to calculate the required video timing values
+ per video mode. Since the GTF allows nondiscrete timings
+ (nondiscrete being a range of values as opposed to discrete being a
+ set of values), you'll be able to use any combination of horizontal
+ and vertical resolutions, and vertical refresh rates without having
+ to specify your own timing parameters. This is especially useful
+ to maximize the performance of an aging display, or if you just
+ have a display with nonstandard dimensions. A VESA compliant
+ monitor is recommended, but can still work with non-compliant ones.
+ If you need or want this, then select this option. The timings may
+ not be compliant with Intel's recommended values. Use at your own
+ risk.
+
+ If you say N, the driver will revert to discrete video timings
+ using a set recommended by Intel in their documentation.
+
+ If unsure, say N.
+
+config FB_I810_I2C
+ bool "Enable DDC Support"
+ depends on FB_I810 && FB_I810_GTF
+ select FB_DDC
+ help
+
+config FB_LE80578
+ tristate "Intel LE80578 (Vermilion) support"
+ depends on FB && PCI && X86
+ select FB_MODE_HELPERS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This driver supports the LE80578 (Vermilion Range) chipset
+
+config FB_CARILLO_RANCH
+ tristate "Intel Carillo Ranch support"
+ depends on FB_LE80578 && FB && PCI && X86
+ help
+ This driver supports the LE80578 (Carillo Ranch) board
+
+config FB_INTEL
+ tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G/945GM/965G/965GM support"
+ depends on FB && PCI && X86 && AGP_INTEL && EXPERT
+ select FB_MODE_HELPERS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_BOOT_VESA_SUPPORT if FB_INTEL = y
+ depends on !DRM_I915
+ help
+ This driver supports the on-board graphics built in to the Intel
+ 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets.
+ Say Y if you have and plan to use such a board.
+
+ To make FB_INTELFB=Y work you need to say AGP_INTEL=y too.
+
+ To compile this driver as a module, choose M here: the
+ module will be called intelfb.
+
+ For more information, please read <file:Documentation/fb/intelfb.txt>
+
+config FB_INTEL_DEBUG
+ bool "Intel driver Debug Messages"
+ depends on FB_INTEL
+ ---help---
+ Say Y here if you want the Intel driver to output all sorts
+ of debugging information to provide to the maintainer when
+ something goes wrong.
+
+config FB_INTEL_I2C
+ bool "DDC/I2C for Intel framebuffer support"
+ depends on FB_INTEL
+ select FB_DDC
+ default y
+ help
+ Say Y here if you want DDC/I2C support for your on-board Intel graphics.
+
+config FB_MATROX
+ tristate "Matrox acceleration"
+ depends on FB && PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_TILEBLITTING
+ select FB_MACMODES if PPC_PMAC
+ ---help---
+ Say Y here if you have a Matrox Millennium, Matrox Millennium II,
+ Matrox Mystique, Matrox Mystique 220, Matrox Productiva G100, Matrox
+ Mystique G200, Matrox Millennium G200, Matrox Marvel G200 video,
+ Matrox G400, G450 or G550 card in your box.
+
+ To compile this driver as a module, choose M here: the
+ module will be called matroxfb.
+
+ You can pass several parameters to the driver at boot time or at
+ module load time. The parameters look like "video=matroxfb:XXX", and
+ are described in <file:Documentation/fb/matroxfb.txt>.
+
+config FB_MATROX_MILLENIUM
+ bool "Millennium I/II support"
+ depends on FB_MATROX
+ help
+ Say Y here if you have a Matrox Millennium or Matrox Millennium II
+ video card. If you select "Advanced lowlevel driver options" below,
+ you should check 4 bpp packed pixel, 8 bpp packed pixel, 16 bpp
+ packed pixel, 24 bpp packed pixel and 32 bpp packed pixel. You can
+ also use font widths different from 8.
+
+config FB_MATROX_MYSTIQUE
+ bool "Mystique support"
+ depends on FB_MATROX
+ help
+ Say Y here if you have a Matrox Mystique or Matrox Mystique 220
+ video card. If you select "Advanced lowlevel driver options" below,
+ you should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp
+ packed pixel and 32 bpp packed pixel. You can also use font widths
+ different from 8.
+
+config FB_MATROX_G
+ bool "G100/G200/G400/G450/G550 support"
+ depends on FB_MATROX
+ ---help---
+ Say Y here if you have a Matrox G100, G200, G400, G450 or G550 based
+ video card. If you select "Advanced lowlevel driver options", you
+ should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp packed
+ pixel and 32 bpp packed pixel. You can also use font widths
+ different from 8.
+
+ If you need support for G400 secondary head, you must say Y to
+ "Matrox I2C support" and "G400 second head support" right below.
+ G450/G550 secondary head and digital output are supported without
+ additional modules.
+
+ The driver starts in monitor mode. You must use the matroxset tool
+ (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to
+ swap primary and secondary head outputs, or to change output mode.
+ Secondary head driver always start in 640x480 resolution and you
+ must use fbset to change it.
+
+ Do not forget that second head supports only 16 and 32 bpp
+ packed pixels, so it is a good idea to compile them into the kernel
+ too. You can use only some font widths, as the driver uses generic
+ painting procedures (the secondary head does not use acceleration
+ engine).
+
+ G450/G550 hardware can display TV picture only from secondary CRTC,
+ and it performs no scaling, so picture must have 525 or 625 lines.
+
+config FB_MATROX_I2C
+ tristate "Matrox I2C support"
+ depends on FB_MATROX
+ select FB_DDC
+ ---help---
+ This drivers creates I2C buses which are needed for accessing the
+ DDC (I2C) bus present on all Matroxes, an I2C bus which
+ interconnects Matrox optional devices, like MGA-TVO on G200 and
+ G400, and the secondary head DDC bus, present on G400 only.
+
+ You can say Y or M here if you want to experiment with monitor
+ detection code. You must say Y or M here if you want to use either
+ second head of G400 or MGA-TVO on G200 or G400.
+
+ If you compile it as module, it will create a module named
+ i2c-matroxfb.
+
+config FB_MATROX_MAVEN
+ tristate "G400 second head support"
+ depends on FB_MATROX_G && FB_MATROX_I2C
+ ---help---
+ WARNING !!! This support does not work with G450 !!!
+
+ Say Y or M here if you want to use a secondary head (meaning two
+ monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary
+ head is not compatible with accelerated XFree 3.3.x SVGA servers -
+ secondary head output is blanked while you are in X. With XFree
+ 3.9.17 preview you can use both heads if you use SVGA over fbdev or
+ the fbdev driver on first head and the fbdev driver on second head.
+
+ If you compile it as module, two modules are created,
+ matroxfb_crtc2 and matroxfb_maven. Matroxfb_maven is needed for
+ both G200 and G400, matroxfb_crtc2 is needed only by G400. You must
+ also load i2c-matroxfb to get it to run.
+
+ The driver starts in monitor mode and you must use the matroxset
+ tool (available at
+ <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to
+ PAL or NTSC or to swap primary and secondary head outputs.
+ Secondary head driver also always start in 640x480 resolution, you
+ must use fbset to change it.
+
+ Also do not forget that second head supports only 16 and 32 bpp
+ packed pixels, so it is a good idea to compile them into the kernel
+ too. You can use only some font widths, as the driver uses generic
+ painting procedures (the secondary head does not use acceleration
+ engine).
+
+config FB_RADEON
+ tristate "ATI Radeon display support"
+ depends on FB && PCI
+ select FB_BACKLIGHT if FB_RADEON_BACKLIGHT
+ select FB_MODE_HELPERS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_MACMODES if PPC
+ help
+ Choose this option if you want to use an ATI Radeon graphics card as
+ a framebuffer device. There are both PCI and AGP versions. You
+ don't need to choose this to run the Radeon in plain VGA mode.
+
+ There is a product page at
+ http://products.amd.com/en-us/GraphicCardResult.aspx
+
+config FB_RADEON_I2C
+ bool "DDC/I2C for ATI Radeon support"
+ depends on FB_RADEON
+ select FB_DDC
+ default y
+ help
+ Say Y here if you want DDC/I2C support for your Radeon board.
+
+config FB_RADEON_BACKLIGHT
+ bool "Support for backlight control"
+ depends on FB_RADEON
+ default y
+ help
+ Say Y here if you want to control the backlight of your display.
+
+config FB_RADEON_DEBUG
+ bool "Lots of debug output from Radeon driver"
+ depends on FB_RADEON
+ default n
+ help
+ Say Y here if you want the Radeon driver to output all sorts
+ of debugging information to provide to the maintainer when
+ something goes wrong.
+
+config FB_ATY128
+ tristate "ATI Rage128 display support"
+ depends on FB && PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_BACKLIGHT if FB_ATY128_BACKLIGHT
+ select FB_MACMODES if PPC_PMAC
+ help
+ This driver supports graphics boards with the ATI Rage128 chips.
+ Say Y if you have such a graphics board and read
+ <file:Documentation/fb/aty128fb.txt>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called aty128fb.
+
+config FB_ATY128_BACKLIGHT
+ bool "Support for backlight control"
+ depends on FB_ATY128
+ default y
+ help
+ Say Y here if you want to control the backlight of your display.
+
+config FB_ATY
+ tristate "ATI Mach64 display support" if PCI || ATARI
+ depends on FB && !SPARC32
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_BACKLIGHT if FB_ATY_BACKLIGHT
+ select FB_MACMODES if PPC
+ help
+ This driver supports graphics boards with the ATI Mach64 chips.
+ Say Y if you have such a graphics board.
+
+ To compile this driver as a module, choose M here: the
+ module will be called atyfb.
+
+config FB_ATY_CT
+ bool "Mach64 CT/VT/GT/LT (incl. 3D RAGE) support"
+ depends on PCI && FB_ATY
+ default y if SPARC64 && PCI
+ help
+ Say Y here to support use of ATI's 64-bit Rage boards (or other
+ boards based on the Mach64 CT, VT, GT, and LT chipsets) as a
+ framebuffer device. The ATI product support page for these boards
+ is at <http://support.ati.com/products/pc/mach64/mach64.html>.
+
+config FB_ATY_GENERIC_LCD
+ bool "Mach64 generic LCD support"
+ depends on FB_ATY_CT
+ help
+ Say Y if you have a laptop with an ATI Rage LT PRO, Rage Mobility,
+ Rage XC, or Rage XL chipset.
+
+config FB_ATY_GX
+ bool "Mach64 GX support" if PCI
+ depends on FB_ATY
+ default y if ATARI
+ help
+ Say Y here to support use of the ATI Mach64 Graphics Expression
+ board (or other boards based on the Mach64 GX chipset) as a
+ framebuffer device. The ATI product support page for these boards
+ is at
+ <http://support.ati.com/products/pc/mach64/graphics_xpression.html>.
+
+config FB_ATY_BACKLIGHT
+ bool "Support for backlight control"
+ depends on FB_ATY
+ default y
+ help
+ Say Y here if you want to control the backlight of your display.
+
+config FB_S3
+ tristate "S3 Trio/Virge support"
+ depends on FB && PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_TILEBLITTING
+ select FB_SVGALIB
+ select VGASTATE
+ select FONT_8x16 if FRAMEBUFFER_CONSOLE
+ ---help---
+ Driver for graphics boards with S3 Trio / S3 Virge chip.
+
+config FB_S3_DDC
+ bool "DDC for S3 support"
+ depends on FB_S3
+ select FB_DDC
+ default y
+ help
+ Say Y here if you want DDC support for your S3 graphics card.
+
+config FB_SAVAGE
+ tristate "S3 Savage support"
+ depends on FB && PCI
+ select FB_MODE_HELPERS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select VGASTATE
+ help
+ This driver supports notebooks and computers with S3 Savage PCI/AGP
+ chips.
+
+ Say Y if you have such a graphics card.
+
+ To compile this driver as a module, choose M here; the module
+ will be called savagefb.
+
+config FB_SAVAGE_I2C
+ bool "Enable DDC2 Support"
+ depends on FB_SAVAGE
+ select FB_DDC
+ help
+ This enables I2C support for S3 Savage Chipsets. This is used
+ only for getting EDID information from the attached display
+ allowing for robust video mode handling and switching.
+
+ Because fbdev-2.6 requires that drivers must be able to
+ independently validate video mode parameters, you should say Y
+ here.
+
+config FB_SAVAGE_ACCEL
+ bool "Enable Console Acceleration"
+ depends on FB_SAVAGE
+ default n
+ help
+ This option will compile in console acceleration support. If
+ the resulting framebuffer console has bothersome glitches, then
+ choose N here.
+
+config FB_SIS
+ tristate "SiS/XGI display support"
+ depends on FB && PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_BOOT_VESA_SUPPORT if FB_SIS = y
+ help
+ This is the frame buffer device driver for the SiS 300, 315, 330
+ and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets.
+ Specs available at <http://www.sis.com> and <http://www.xgitech.com>.
+
+ To compile this driver as a module, choose M here; the module
+ will be called sisfb.
+
+config FB_SIS_300
+ bool "SiS 300 series support"
+ depends on FB_SIS
+ help
+ Say Y here to support use of the SiS 300/305, 540, 630 and 730.
+
+config FB_SIS_315
+ bool "SiS 315/330/340 series and XGI support"
+ depends on FB_SIS
+ help
+ Say Y here to support use of the SiS 315, 330 and 340 series
+ (315/H/PRO, 55x, 650, 651, 740, 330, 661, 741, 760, 761) as well
+ as XGI V3XT, V5, V8 and Z7.
+
+config FB_VIA
+ tristate "VIA UniChrome (Pro) and Chrome9 display support"
+ depends on FB && PCI && X86 && GPIOLIB && I2C
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select I2C_ALGOBIT
+ help
+ This is the frame buffer device driver for Graphics chips of VIA
+ UniChrome (Pro) Family (CLE266,PM800/CN400,P4M800CE/P4M800Pro/
+ CN700/VN800,CX700/VX700,P4M890) and Chrome9 Family (K8M890,CN896
+ /P4M900,VX800)
+ Say Y if you have a VIA UniChrome graphics board.
+
+ To compile this driver as a module, choose M here: the
+ module will be called viafb.
+
+if FB_VIA
+
+config FB_VIA_DIRECT_PROCFS
+ bool "direct hardware access via procfs (DEPRECATED)(DANGEROUS)"
+ depends on FB_VIA
+ default n
+ help
+ Allow direct hardware access to some output registers via procfs.
+ This is dangerous but may provide the only chance to get the
+ correct output device configuration.
+ Its use is strongly discouraged.
+
+config FB_VIA_X_COMPATIBILITY
+ bool "X server compatibility"
+ depends on FB_VIA
+ default n
+ help
+ This option reduces the functionality (power saving, ...) of the
+ framebuffer to avoid negative impact on the OpenChrome X server.
+ If you use any X server other than fbdev you should enable this
+ otherwise it should be safe to disable it and allow using all
+ features.
+
+endif
+
+config FB_NEOMAGIC
+ tristate "NeoMagic display support"
+ depends on FB && PCI
+ select FB_MODE_HELPERS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select VGASTATE
+ help
+ This driver supports notebooks with NeoMagic PCI chips.
+ Say Y if you have such a graphics card.
+
+ To compile this driver as a module, choose M here: the
+ module will be called neofb.
+
+config FB_KYRO
+ tristate "IMG Kyro support"
+ depends on FB && PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ Say Y here if you have a STG4000 / Kyro / PowerVR 3 based
+ graphics board.
+
+ To compile this driver as a module, choose M here: the
+ module will be called kyrofb.
+
+config FB_3DFX
+ tristate "3Dfx Banshee/Voodoo3/Voodoo5 display support"
+ depends on FB && PCI
+ select FB_CFB_IMAGEBLIT
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_MODE_HELPERS
+ help
+ This driver supports graphics boards with the 3Dfx Banshee,
+ Voodoo3 or VSA-100 (aka Voodoo4/5) chips. Say Y if you have
+ such a graphics board.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tdfxfb.
+
+config FB_3DFX_ACCEL
+ bool "3Dfx Acceleration functions"
+ depends on FB_3DFX
+ ---help---
+ This will compile the 3Dfx Banshee/Voodoo3/VSA-100 frame buffer
+ device driver with acceleration functions.
+
+config FB_3DFX_I2C
+ bool "Enable DDC/I2C support"
+ depends on FB_3DFX
+ select FB_DDC
+ default y
+ help
+ Say Y here if you want DDC/I2C support for your 3dfx Voodoo3.
+
+config FB_VOODOO1
+ tristate "3Dfx Voodoo Graphics (sst1) support"
+ depends on FB && PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Say Y here if you have a 3Dfx Voodoo Graphics (Voodoo1/sst1) or
+ Voodoo2 (cvg) based graphics card.
+
+ To compile this driver as a module, choose M here: the
+ module will be called sstfb.
+
+ WARNING: Do not use any application that uses the 3D engine
+ (namely glide) while using this driver.
+ Please read the <file:Documentation/fb/sstfb.txt> for supported
+ options and other important info support.
+
+config FB_VT8623
+ tristate "VIA VT8623 support"
+ depends on FB && PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_TILEBLITTING
+ select FB_SVGALIB
+ select VGASTATE
+ select FONT_8x16 if FRAMEBUFFER_CONSOLE
+ ---help---
+ Driver for CastleRock integrated graphics core in the
+ VIA VT8623 [Apollo CLE266] chipset.
+
+config FB_TRIDENT
+ tristate "Trident/CyberXXX/CyberBlade support"
+ depends on FB && PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ This is the frame buffer device driver for Trident PCI/AGP chipsets.
+ Supported chipset families are TGUI 9440/96XX, 3DImage, Blade3D
+ and Blade XP.
+ There are also integrated versions of these chips called CyberXXXX,
+ CyberImage or CyberBlade. These chips are mostly found in laptops
+ but also on some motherboards including early VIA EPIA motherboards.
+ For more information, read <file:Documentation/fb/tridentfb.txt>
+
+ Say Y if you have such a graphics board.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tridentfb.
+
+config FB_ARK
+ tristate "ARK 2000PV support"
+ depends on FB && PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_TILEBLITTING
+ select FB_SVGALIB
+ select VGASTATE
+ select FONT_8x16 if FRAMEBUFFER_CONSOLE
+ ---help---
+ Driver for PCI graphics boards with ARK 2000PV chip
+ and ICS 5342 RAMDAC.
+
+config FB_PM3
+ tristate "Permedia3 support"
+ depends on FB && PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the 3DLabs Permedia3
+ chipset, used in Formac ProFormance III, 3DLabs Oxygen VX1 &
+ similar boards, 3DLabs Permedia3 Create!, Appian Jeronimo 2000
+ and maybe other boards.
+
+config FB_CARMINE
+ tristate "Fujitsu carmine frame buffer support"
+ depends on FB && PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the Fujitsu Carmine chip.
+ The driver provides two independent frame buffer devices.
+
+choice
+ depends on FB_CARMINE
+ prompt "DRAM timing"
+ default FB_CARMINE_DRAM_EVAL
+
+config FB_CARMINE_DRAM_EVAL
+ bool "Eval board timings"
+ help
+ Use timings which work on the eval card.
+
+config CARMINE_DRAM_CUSTOM
+ bool "Custom board timings"
+ help
+ Use custom board timings.
+endchoice
+
+config FB_AU1100
+ bool "Au1100 LCD Driver"
+ depends on (FB = y) && MIPS_ALCHEMY
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the framebuffer driver for the AMD Au1100 SOC. It can drive
+ various panels and CRTs by passing in kernel cmd line option
+ au1100fb:panel=<name>.
+
+config FB_AU1200
+ bool "Au1200/Au1300 LCD Driver"
+ depends on (FB = y) && MIPS_ALCHEMY
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
+ help
+ This is the framebuffer driver for the Au1200/Au1300 SOCs.
+ It can drive various panels and CRTs by passing in kernel cmd line
+ option au1200fb:panel=<name>.
+
+config FB_VT8500
+ bool "VIA VT8500 framebuffer support"
+ depends on (FB = y) && ARM && ARCH_VT8500
+ select FB_SYS_FILLRECT if (!FB_WMT_GE_ROPS)
+ select FB_SYS_COPYAREA if (!FB_WMT_GE_ROPS)
+ select FB_SYS_IMAGEBLIT
+ select FB_MODE_HELPERS
+ select VIDEOMODE_HELPERS
+ help
+ This is the framebuffer driver for VIA VT8500 integrated LCD
+ controller.
+
+config FB_WM8505
+ bool "Wondermedia WM8xxx-series frame buffer support"
+ depends on (FB = y) && ARM && ARCH_VT8500
+ select FB_SYS_FILLRECT if (!FB_WMT_GE_ROPS)
+ select FB_SYS_COPYAREA if (!FB_WMT_GE_ROPS)
+ select FB_SYS_IMAGEBLIT
+ select FB_MODE_HELPERS
+ select VIDEOMODE_HELPERS
+ help
+ This is the framebuffer driver for WonderMedia WM8xxx-series
+ integrated LCD controller. This driver covers the WM8505, WM8650
+ and WM8850 SoCs.
+
+config FB_WMT_GE_ROPS
+ bool "VT8500/WM8xxx accelerated raster ops support"
+ depends on (FB = y) && (FB_VT8500 || FB_WM8505)
+ default n
+ help
+ This adds support for accelerated raster operations on the
+ VIA VT8500 and Wondermedia 85xx series SoCs.
+
+source "drivers/video/fbdev/geode/Kconfig"
+
+config FB_HIT
+ tristate "HD64461 Frame Buffer support"
+ depends on FB && HD64461
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the Hitachi HD64461 LCD
+ frame buffer card.
+
+config FB_PMAG_AA
+ bool "PMAG-AA TURBOchannel framebuffer support"
+ depends on (FB = y) && TC
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1)
+ used mainly in the MIPS-based DECstation series.
+
+config FB_PMAG_BA
+ tristate "PMAG-BA TURBOchannel framebuffer support"
+ depends on FB && TC
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8)
+ used mainly in the MIPS-based DECstation series.
+
+config FB_PMAGB_B
+ tristate "PMAGB-B TURBOchannel framebuffer support"
+ depends on FB && TC
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ Support for the PMAGB-B TURBOchannel framebuffer card used mainly
+ in the MIPS-based DECstation series. The card is currently only
+ supported in 1280x1024x8 mode.
+
+config FB_MAXINE
+ bool "Maxine (Personal DECstation) onboard framebuffer support"
+ depends on (FB = y) && MACH_DECSTATION
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ Support for the onboard framebuffer (1024x768x8) in the Personal
+ DECstation series (Personal DECstation 5000/20, /25, /33, /50,
+ Codename "Maxine").
+
+config FB_G364
+ bool "G364 frame buffer support"
+ depends on (FB = y) && (MIPS_MAGNUM_4000 || OLIVETTI_M700)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ The G364 driver is the framebuffer used in MIPS Magnum 4000 and
+ Olivetti M700-10 systems.
+
+config FB_68328
+ bool "Motorola 68328 native frame buffer support"
+ depends on (FB = y) && (M68328 || M68EZ328 || M68VZ328)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ Say Y here if you want to support the built-in frame buffer of
+ the Motorola 68328 CPU family.
+
+config FB_PXA168
+ tristate "PXA168/910 LCD framebuffer support"
+ depends on FB && (CPU_PXA168 || CPU_PXA910)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Frame buffer driver for the built-in LCD controller in the Marvell
+ MMP processor.
+
+config FB_PXA
+ tristate "PXA LCD framebuffer support"
+ depends on FB && ARCH_PXA
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Frame buffer driver for the built-in LCD controller in the Intel
+ PXA2x0 processor.
+
+ This driver is also available as a module ( = code which can be
+ inserted and removed from the running kernel whenever you want). The
+ module will be called pxafb. If you want to compile it as a module,
+ say M here and read <file:Documentation/kbuild/modules.txt>.
+
+ If unsure, say N.
+
+config FB_PXA_OVERLAY
+ bool "Support PXA27x/PXA3xx Overlay(s) as framebuffer"
+ default n
+ depends on FB_PXA && (PXA27x || PXA3xx)
+
+config FB_PXA_SMARTPANEL
+ bool "PXA Smartpanel LCD support"
+ default n
+ depends on FB_PXA
+
+config FB_PXA_PARAMETERS
+ bool "PXA LCD command line parameters"
+ default n
+ depends on FB_PXA
+ ---help---
+ Enable the use of kernel command line or module parameters
+ to configure the physical properties of the LCD panel when
+ using the PXA LCD driver.
+
+ This option allows you to override the panel parameters
+ supplied by the platform in order to support multiple
+ different models of flatpanel. If you will only be using a
+ single model of flatpanel then you can safely leave this
+ option disabled.
+
+ <file:Documentation/fb/pxafb.txt> describes the available parameters.
+
+config PXA3XX_GCU
+ tristate "PXA3xx 2D graphics accelerator driver"
+ depends on FB_PXA
+ help
+ Kernelspace driver for the 2D graphics controller unit (GCU)
+ found on PXA3xx processors. There is a counterpart driver in the
+ DirectFB suite, see http://www.directfb.org/
+
+ If you compile this as a module, it will be called pxa3xx_gcu.
+
+config FB_MBX
+ tristate "2700G LCD framebuffer support"
+ depends on FB && ARCH_PXA
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Framebuffer driver for the Intel 2700G (Marathon) Graphics
+ Accelerator
+
+config FB_MBX_DEBUG
+ bool "Enable debugging info via debugfs"
+ depends on FB_MBX && DEBUG_FS
+ default n
+ ---help---
+ Enable this if you want debugging information using the debug
+ filesystem (debugfs)
+
+ If unsure, say N.
+
+config FB_FSL_DIU
+ tristate "Freescale DIU framebuffer support"
+ depends on FB && FSL_SOC
+ select FB_MODE_HELPERS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select PPC_LIB_RHEAP
+ ---help---
+ Framebuffer driver for the Freescale SoC DIU
+
+config FB_W100
+ tristate "W100 frame buffer support"
+ depends on FB && ARCH_PXA
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Frame buffer driver for the w100 as found on the Sharp SL-Cxx series.
+ It can also drive the w3220 chip found on iPAQ hx4700.
+
+ This driver is also available as a module ( = code which can be
+ inserted and removed from the running kernel whenever you want). The
+ module will be called w100fb. If you want to compile it as a module,
+ say M here and read <file:Documentation/kbuild/modules.txt>.
+
+ If unsure, say N.
+
+config FB_SH_MOBILE_LCDC
+ tristate "SuperH Mobile LCDC framebuffer support"
+ depends on FB && (SUPERH || ARCH_SHMOBILE) && HAVE_CLK
+ depends on FB_SH_MOBILE_MERAM || !FB_SH_MOBILE_MERAM
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
+ select FB_DEFERRED_IO
+ select FB_BACKLIGHT
+ select SH_MIPI_DSI if SH_LCD_MIPI_DSI
+ ---help---
+ Frame buffer driver for the on-chip SH-Mobile LCD controller.
+
+config FB_SH_MOBILE_HDMI
+ tristate "SuperH Mobile HDMI controller support"
+ depends on FB_SH_MOBILE_LCDC
+ select FB_MODE_HELPERS
+ select SOUND
+ select SND
+ select SND_SOC
+ ---help---
+ Driver for the on-chip SH-Mobile HDMI controller.
+
+config FB_TMIO
+ tristate "Toshiba Mobile IO FrameBuffer support"
+ depends on FB && (MFD_TMIO || COMPILE_TEST)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Frame buffer driver for the Toshiba Mobile IO integrated as found
+ on the Sharp SL-6000 series
+
+ This driver is also available as a module ( = code which can be
+ inserted and removed from the running kernel whenever you want). The
+ module will be called tmiofb. If you want to compile it as a module,
+ say M here and read <file:Documentation/kbuild/modules.txt>.
+
+ If unsure, say N.
+
+config FB_TMIO_ACCELL
+ bool "tmiofb acceleration"
+ depends on FB_TMIO
+ default y
+
+config FB_S3C
+ tristate "Samsung S3C framebuffer support"
+ depends on FB && (CPU_S3C2416 || ARCH_S3C64XX || \
+ ARCH_S5PV210 || ARCH_EXYNOS)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Frame buffer driver for the built-in FB controller in the Samsung
+ SoC line from the S3C2443 onwards, including the S3C2416, S3C2450,
+ and the S3C64XX series such as the S3C6400 and S3C6410.
+
+ These chips all have the same basic framebuffer design with the
+ actual capabilities depending on the chip. For instance the S3C6400
+ and S3C6410 support 4 hardware windows whereas the S3C24XX series
+ currently only have two.
+
+ Currently the support is only for the S3C6400 and S3C6410 SoCs.
+
+config FB_S3C_DEBUG_REGWRITE
+ bool "Debug register writes"
+ depends on FB_S3C
+ ---help---
+ Show all register writes via pr_debug()
+
+config FB_S3C2410
+ tristate "S3C2410 LCD framebuffer support"
+ depends on FB && ARCH_S3C24XX
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Frame buffer driver for the built-in LCD controller in the Samsung
+ S3C2410 processor.
+
+ This driver is also available as a module ( = code which can be
+ inserted and removed from the running kernel whenever you want). The
+ module will be called s3c2410fb. If you want to compile it as a module,
+ say M here and read <file:Documentation/kbuild/modules.txt>.
+
+ If unsure, say N.
+config FB_S3C2410_DEBUG
+ bool "S3C2410 lcd debug messages"
+ depends on FB_S3C2410
+ help
+ Turn on debugging messages. Note that you can set/unset at run time
+ through sysfs
+
+config FB_NUC900
+ tristate "NUC900 LCD framebuffer support"
+ depends on FB && ARCH_W90X900
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Frame buffer driver for the built-in LCD controller in the Nuvoton
+ NUC900 processor
+
+config GPM1040A0_320X240
+ bool "Giantplus Technology GPM1040A0 320x240 Color TFT LCD"
+ depends on FB_NUC900
+
+config FB_SM501
+ tristate "Silicon Motion SM501 framebuffer support"
+ depends on FB && MFD_SM501
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Frame buffer driver for the CRT and LCD controllers in the Silicon
+ Motion SM501.
+
+ This driver is also available as a module ( = code which can be
+ inserted and removed from the running kernel whenever you want). The
+ module will be called sm501fb. If you want to compile it as a module,
+ say M here and read <file:Documentation/kbuild/modules.txt>.
+
+ If unsure, say N.
+
+config FB_SMSCUFX
+ tristate "SMSC UFX6000/7000 USB Framebuffer support"
+ depends on FB && USB
+ select FB_MODE_HELPERS
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
+ select FB_DEFERRED_IO
+ ---help---
+ This is a kernel framebuffer driver for SMSC UFX USB devices.
+ Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
+ mplayer -vo fbdev. Supports both UFX6000 (USB 2.0) and UFX7000
+ (USB 3.0) devices.
+ To compile as a module, choose M here: the module name is smscufx.
+
+config FB_UDL
+ tristate "Displaylink USB Framebuffer support"
+ depends on FB && USB
+ select FB_MODE_HELPERS
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
+ select FB_DEFERRED_IO
+ ---help---
+ This is a kernel framebuffer driver for DisplayLink USB devices.
+ Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
+ mplayer -vo fbdev. Supports all USB 2.0 era DisplayLink devices.
+ To compile as a module, choose M here: the module name is udlfb.
+
+config FB_IBM_GXT4500
+ tristate "Framebuffer support for IBM GXT4000P/4500P/6000P/6500P adaptors"
+ depends on FB && PPC
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Say Y here to enable support for the IBM GXT4000P/6000P and
+ GXT4500P/6500P display adaptor based on Raster Engine RC1000,
+ found on some IBM System P (pSeries) machines. This driver
+ doesn't use Geometry Engine GT1000.
+
+config FB_PS3
+ tristate "PS3 GPU framebuffer driver"
+ depends on FB && PS3_PS3AV
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
+ ---help---
+ Include support for the virtual frame buffer in the PS3 platform.
+
+config FB_PS3_DEFAULT_SIZE_M
+ int "PS3 default frame buffer size (in MiB)"
+ depends on FB_PS3
+ default 9
+ ---help---
+ This is the default size (in MiB) of the virtual frame buffer in
+ the PS3.
+ The default value can be overridden on the kernel command line
+ using the "ps3fb" option (e.g. "ps3fb=9M");
+
+config FB_XILINX
+ tristate "Xilinx frame buffer support"
+ depends on FB && (XILINX_VIRTEX || MICROBLAZE || ARCH_ZYNQ)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Include support for the Xilinx ML300/ML403 reference design
+ framebuffer. ML300 carries a 640*480 LCD display on the board,
+ ML403 uses a standard DB15 VGA connector.
+
+config FB_GOLDFISH
+ tristate "Goldfish Framebuffer"
+ depends on FB && HAS_DMA && (GOLDFISH || COMPILE_TEST)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Framebuffer driver for Goldfish Virtual Platform
+
+config FB_COBALT
+ tristate "Cobalt server LCD frame buffer support"
+ depends on FB && (MIPS_COBALT || MIPS_SEAD3)
+
+config FB_SH7760
+ bool "SH7760/SH7763/SH7720/SH7721 LCDC support"
+ depends on FB && (CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7763 \
+ || CPU_SUBTYPE_SH7720 || CPU_SUBTYPE_SH7721)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Support for the SH7760/SH7763/SH7720/SH7721 integrated
+ (D)STN/TFT LCD Controller.
+ Supports display resolutions up to 1024x1024 pixel, grayscale and
+ color operation, with depths ranging from 1 bpp to 8 bpp monochrome
+ and 8, 15 or 16 bpp color; 90 degrees clockwise display rotation for
+ panels <= 320 pixel horizontal resolution.
+
+config FB_DA8XX
+ tristate "DA8xx/OMAP-L1xx/AM335x Framebuffer support"
+ depends on FB && (ARCH_DAVINCI_DA8XX || SOC_AM33XX)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_CFB_REV_PIXELS_IN_BYTE
+ select FB_MODE_HELPERS
+ select VIDEOMODE_HELPERS
+ ---help---
+ This is the frame buffer device driver for the TI LCD controller
+ found on DA8xx/OMAP-L1xx/AM335x SoCs.
+ If unsure, say N.
+
+config FB_VIRTUAL
+ tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
+ depends on FB
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
+ ---help---
+ This is a `virtual' frame buffer device. It operates on a chunk of
+ unswappable kernel memory instead of on the memory of a graphics
+ board. This means you cannot see any output sent to this frame
+ buffer device, while it does consume precious memory. The main use
+ of this frame buffer device is testing and debugging the frame
+ buffer subsystem. Do NOT enable it for normal systems! To protect
+ the innocent, it has to be enabled explicitly at boot time using the
+ kernel option `video=vfb:'.
+
+ To compile this driver as a module, choose M here: the
+ module will be called vfb. In order to load it, you must use
+ the vfb_enable=1 option.
+
+ If unsure, say N.
+
+config XEN_FBDEV_FRONTEND
+ tristate "Xen virtual frame buffer support"
+ depends on FB && XEN
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
+ select FB_DEFERRED_IO
+ select INPUT_XEN_KBDDEV_FRONTEND if INPUT_MISC
+ select XEN_XENBUS_FRONTEND
+ default y
+ help
+ This driver implements the front-end of the Xen virtual
+ frame buffer driver. It communicates with a back-end
+ in another domain.
+
+config FB_METRONOME
+ tristate "E-Ink Metronome/8track controller support"
+ depends on FB
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
+ select FB_DEFERRED_IO
+ help
+ This driver implements support for the E-Ink Metronome
+ controller. The pre-release name for this device was 8track
+ and could also have been called by some vendors as PVI-nnnn.
+
+config FB_MB862XX
+ tristate "Fujitsu MB862xx GDC support"
+ depends on FB
+ depends on PCI || (OF && PPC)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Frame buffer driver for Fujitsu Carmine/Coral-P(A)/Lime controllers.
+
+choice
+ prompt "GDC variant"
+ depends on FB_MB862XX
+
+config FB_MB862XX_PCI_GDC
+ bool "Carmine/Coral-P(A) GDC"
+ depends on PCI
+ ---help---
+ This enables framebuffer support for Fujitsu Carmine/Coral-P(A)
+ PCI graphics controller devices.
+
+config FB_MB862XX_LIME
+ bool "Lime GDC"
+ depends on OF && PPC
+ select FB_FOREIGN_ENDIAN
+ select FB_LITTLE_ENDIAN
+ ---help---
+ Framebuffer support for Fujitsu Lime GDC on host CPU bus.
+
+endchoice
+
+config FB_MB862XX_I2C
+ bool "Support I2C bus on MB862XX GDC"
+ depends on FB_MB862XX && I2C
+ depends on FB_MB862XX=m || I2C=y
+ default y
+ help
+ Selecting this option adds Coral-P(A)/Lime GDC I2C bus adapter
+ driver to support accessing I2C devices on controller's I2C bus.
+ These are usually some video decoder chips.
+
+config FB_EP93XX
+ tristate "EP93XX frame buffer support"
+ depends on FB && ARCH_EP93XX
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Framebuffer driver for the Cirrus Logic EP93XX series of processors.
+ This driver is also available as a module. The module will be called
+ ep93xx-fb.
+
+config FB_PRE_INIT_FB
+ bool "Don't reinitialize, use bootloader's GDC/Display configuration"
+ depends on FB && FB_MB862XX_LIME
+ ---help---
+ Select this option if display contents should be inherited as set by
+ the bootloader.
+
+config FB_MSM
+ tristate "MSM Framebuffer support"
+ depends on FB && ARCH_MSM
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+
+config FB_MX3
+ tristate "MX3 Framebuffer support"
+ depends on FB && MX3_IPU
+ select BACKLIGHT_CLASS_DEVICE
+ select BACKLIGHT_LCD_SUPPORT
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ default y
+ help
+ This is a framebuffer device for the i.MX31 LCD Controller. So
+ far only synchronous displays are supported. If you plan to use
+ an LCD display with your i.MX31 system, say Y here.
+
+config FB_BROADSHEET
+ tristate "E-Ink Broadsheet/Epson S1D13521 controller support"
+ depends on FB
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
+ select FB_DEFERRED_IO
+ help
+ This driver implements support for the E-Ink Broadsheet
+ controller. The release name for this device was Epson S1D13521
+ and could also have been called by other names when coupled with
+ a bridge adapter.
+
+config FB_AUO_K190X
+ tristate "AUO-K190X EPD controller support"
+ depends on FB
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
+ select FB_DEFERRED_IO
+ help
+ Provides support for epaper controllers from the K190X series
+ of AUO. These controllers can be used to drive epaper displays
+ from Sipix.
+
+ This option enables the common support, shared by the individual
+ controller drivers. You will also have to enable the driver
+ for the controller type used in your device.
+
+config FB_AUO_K1900
+ tristate "AUO-K1900 EPD controller support"
+ depends on FB && FB_AUO_K190X
+ help
+ This driver implements support for the AUO K1900 epd-controller.
+ This controller can drive Sipix epaper displays but can only do
+ serial updates, reducing the number of possible frames per second.
+
+config FB_AUO_K1901
+ tristate "AUO-K1901 EPD controller support"
+ depends on FB && FB_AUO_K190X
+ help
+ This driver implements support for the AUO K1901 epd-controller.
+ This controller can drive Sipix epaper displays and supports
+ concurrent updates, making higher frames per second possible.
+
+config FB_JZ4740
+ tristate "JZ4740 LCD framebuffer support"
+ depends on FB && MACH_JZ4740
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ help
+ Framebuffer support for the JZ4740 SoC.
+
+config FB_MXS
+ tristate "MXS LCD framebuffer support"
+ depends on FB && (ARCH_MXS || ARCH_MXC)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_MODE_HELPERS
+ select VIDEOMODE_HELPERS
+ help
+ Framebuffer support for the MXS SoC.
+
+config FB_PUV3_UNIGFX
+ tristate "PKUnity v3 Unigfx framebuffer support"
+ depends on FB && UNICORE32 && ARCH_PUV3
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
+ help
+ Choose this option if you want to use the Unigfx device as a
+ framebuffer device. Without the support of PCI & AGP.
+
+config FB_HYPERV
+ tristate "Microsoft Hyper-V Synthetic Video support"
+ depends on FB && HYPERV
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This framebuffer driver supports Microsoft Hyper-V Synthetic Video.
+
+config FB_SIMPLE
+ bool "Simple framebuffer support"
+ depends on (FB = y)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ Say Y if you want support for a simple frame-buffer.
+
+ This driver assumes that the display hardware has been initialized
+ before the kernel boots, and the kernel will simply render to the
+ pre-allocated frame buffer surface.
+
+ Configuration re: surface address, size, and format must be provided
+ through device tree, or plain old platform data.
+
+source "drivers/video/fbdev/omap/Kconfig"
+source "drivers/video/fbdev/omap2/Kconfig"
+source "drivers/video/fbdev/exynos/Kconfig"
+source "drivers/video/fbdev/mmp/Kconfig"
+
+config FB_SH_MOBILE_MERAM
+ tristate "SuperH Mobile MERAM read ahead support"
+ depends on (SUPERH || ARCH_SHMOBILE)
+ select GENERIC_ALLOCATOR
+ ---help---
+ Enable MERAM support for the SuperH controller.
+
+ This will allow for caching of the framebuffer to provide more
+ reliable access under heavy main memory bus traffic situations.
+ Up to 4 memory channels can be configured, allowing 4 RGB or
+ 2 YCbCr framebuffers to be configured.
+
+config FB_SSD1307
+ tristate "Solomon SSD1307 framebuffer support"
+ depends on FB && I2C
+ depends on OF
+ depends on GPIOLIB
+ select FB_SYS_FOPS
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_DEFERRED_IO
+ select PWM
+ help
+ This driver implements support for the Solomon SSD1307
+ OLED controller over I2C.