Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

1 files changed, 144 insertions, 0 deletions

diff --git a/kernel/drivers/video/console/Kconfig b/kernel/drivers/video/console/Kconfig
new file mode 100644
index 000000000..ba97efc3b
--- /dev/null
+++ b/kernel/drivers/video/console/Kconfig
@@ -0,0 +1,144 @@
+#
+# Video configuration
+#
+
+menu "Console display driver support"
+
+config VGA_CONSOLE
+	bool "VGA text console" if EXPERT || !X86
+	depends on !4xx && !8xx && !SPARC && !M68K && !PARISC && !FRV && \
+		!SUPERH && !BLACKFIN && !AVR32 && !MN10300 && !CRIS && \
+		(!ARM || ARCH_FOOTBRIDGE || ARCH_INTEGRATOR || ARCH_NETWINDER) && \
+		!ARM64
+	default y
+	help
+	  Saying Y here will allow you to use Linux in text mode through a
+	  display that complies with the generic VGA standard. Virtually
+	  everyone wants that.
+
+	  The program SVGATextMode can be used to utilize SVGA video cards to
+	  their full potential in text mode. Download it from
+	  <ftp://ibiblio.org/pub/Linux/utils/console/>.
+
+	  Say Y.
+
+config VGACON_SOFT_SCROLLBACK
+       bool "Enable Scrollback Buffer in System RAM"
+       depends on VGA_CONSOLE
+       default n
+       help
+         The scrollback buffer of the standard VGA console is located in
+	 the VGA RAM.  The size of this RAM is fixed and is quite small.
+	 If you require a larger scrollback buffer, this can be placed in
+	 System RAM which is dynamically allocated during initialization.
+	 Placing the scrollback buffer in System RAM will slightly slow
+	 down the console.
+
+	 If you want this feature, say 'Y' here and enter the amount of
+	 RAM to allocate for this buffer.  If unsure, say 'N'.
+
+config VGACON_SOFT_SCROLLBACK_SIZE
+       int "Scrollback Buffer Size (in KB)"
+       depends on VGACON_SOFT_SCROLLBACK
+       range 1 1024
+       default "64"
+       help
+         Enter the amount of System RAM to allocate for the scrollback
+	 buffer.  Each 64KB will give you approximately 16 80x25
+	 screenfuls of scrollback buffer
+
+config MDA_CONSOLE
+	depends on !M68K && !PARISC && ISA
+	tristate "MDA text console (dual-headed)"
+	---help---
+	  Say Y here if you have an old MDA or monochrome Hercules graphics
+	  adapter in your system acting as a second head ( = video card). You
+	  will then be able to use two monitors with your Linux system. Do not
+	  say Y here if your MDA card is the primary card in your system; the
+	  normal VGA driver will handle it.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called mdacon.
+
+	  If unsure, say N.
+
+config SGI_NEWPORT_CONSOLE
+        tristate "SGI Newport Console support"
+        depends on SGI_IP22 
+        select FONT_SUPPORT
+        help
+          Say Y here if you want the console on the Newport aka XL graphics
+          card of your Indy.  Most people say Y here.
+
+config DUMMY_CONSOLE
+	bool
+	depends on VGA_CONSOLE!=y || SGI_NEWPORT_CONSOLE!=y 
+	default y
+
+config DUMMY_CONSOLE_COLUMNS
+        int "Initial number of console screen columns"
+        depends on DUMMY_CONSOLE && !ARM
+        default 160 if PARISC
+        default 80
+        help
+          On PA-RISC, the default value is 160, which should fit a 1280x1024
+          monitor.
+          Select 80 if you use a 640x480 resolution by default.
+
+config DUMMY_CONSOLE_ROWS
+        int "Initial number of console screen rows"
+        depends on DUMMY_CONSOLE && !ARM
+        default 64 if PARISC
+        default 25
+        help
+          On PA-RISC, the default value is 64, which should fit a 1280x1024
+          monitor.
+          Select 25 if you use a 640x480 resolution by default.
+
+config FRAMEBUFFER_CONSOLE
+	tristate "Framebuffer Console support"
+	depends on FB && !UML
+	select VT_HW_CONSOLE_BINDING
+	select CRC32
+	select FONT_SUPPORT
+	help
+	  Low-level framebuffer-based console driver.
+
+config FRAMEBUFFER_CONSOLE_DETECT_PRIMARY
+       bool "Map the console to the primary display device"
+       depends on FRAMEBUFFER_CONSOLE
+       default n
+       ---help---
+         If this option is selected, the framebuffer console will
+         automatically select the primary display device (if the architecture
+	 supports this feature).  Otherwise, the framebuffer console will
+         always select the first framebuffer driver that is loaded. The latter
+         is the default behavior.
+
+	 You can always override the automatic selection of the primary device
+	 by using the fbcon=map: boot option.
+
+	 If unsure, select n.
+
+config FRAMEBUFFER_CONSOLE_ROTATION
+       bool "Framebuffer Console Rotation"
+       depends on FRAMEBUFFER_CONSOLE
+       help
+         Enable display rotation for the framebuffer console.  This is done
+         in software and may be significantly slower than a normally oriented
+         display.  Note that the rotation is done at the console level only
+         such that other users of the framebuffer will remain normally
+         oriented.
+
+config STI_CONSOLE
+        bool "STI text console"
+        depends on PARISC
+        select FONT_SUPPORT
+        default y
+        help
+          The STI console is the builtin display/keyboard on HP-PARISC
+          machines.  Say Y here to build support for it into your kernel.
+          The alternative is to use your primary serial port as a console.
+
+endmenu
+