diff options
| author |   Yunhong Jiang <yunhong.jiang@intel.com> | 2015-08-04 12:17:53 -0700 |
|---|---|---|
| committer | Yunhong Jiang <yunhong.jiang@intel.com> | 2015-08-04 15:44:42 -0700 |
| commit | 9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 (patch) | |
| tree | 1c9cafbcd35f783a87880a10f85d1a060db1a563 /kernel/drivers/usb/storage | |
| parent | 98260f3884f4a202f9ca5eabed40b1354c489b29 (diff) | |
Add the rt linux 4.1.3-rt3 as base
Import the rt linux 4.1.3-rt3 as OPNFV kvm base.
It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:
commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Sat Jul 25 12:13:34 2015 +0200
Prepare v4.1.3-rt3
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.
Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>
Diffstat (limited to 'kernel/drivers/usb/storage')
49 files changed, 22979 insertions, 0 deletions
diff --git a/kernel/drivers/usb/storage/Kconfig b/kernel/drivers/usb/storage/Kconfig new file mode 100644 index 000000000..ec84758f0 --- /dev/null +++ b/kernel/drivers/usb/storage/Kconfig @@ -0,0 +1,214 @@ +# +# USB Storage driver configuration +# + +comment "NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may" +comment "also be needed; see USB_STORAGE Help for more info" + +config USB_STORAGE + tristate "USB Mass Storage support" + depends on SCSI + ---help--- + Say Y here if you want to connect USB mass storage devices to your + computer's USB port. This is the driver you need for USB + floppy drives, USB hard disks, USB tape drives, USB CD-ROMs, + USB flash devices, and memory sticks, along with + similar devices. This driver may also be used for some cameras + and card readers. + + This option depends on 'SCSI' support being enabled, but you + probably also need 'SCSI device support: SCSI disk support' + (BLK_DEV_SD) for most USB storage devices. + + To compile this driver as a module, choose M here: the + module will be called usb-storage. + +config USB_STORAGE_DEBUG + bool "USB Mass Storage verbose debug" + depends on USB_STORAGE + help + Say Y here in order to have the USB Mass Storage code generate + verbose debugging messages. + +config USB_STORAGE_REALTEK + tristate "Realtek Card Reader support" + depends on USB_STORAGE + help + Say Y here to include additional code to support the power-saving function + for Realtek RTS51xx USB card readers. + + If this driver is compiled as a module, it will be named ums-realtek. + +config REALTEK_AUTOPM + bool "Realtek Card Reader autosuspend support" + depends on USB_STORAGE_REALTEK && PM + default y + +config USB_STORAGE_DATAFAB + tristate "Datafab Compact Flash Reader support" + depends on USB_STORAGE + help + Support for certain Datafab CompactFlash readers. + Datafab has a web page at <http://www.datafab.com/>. + + If this driver is compiled as a module, it will be named ums-datafab. + +config USB_STORAGE_FREECOM + tristate "Freecom USB/ATAPI Bridge support" + depends on USB_STORAGE + help + Support for the Freecom USB to IDE/ATAPI adaptor. + Freecom has a web page at <http://www.freecom.de/>. + + If this driver is compiled as a module, it will be named ums-freecom. + +config USB_STORAGE_ISD200 + tristate "ISD-200 USB/ATA Bridge support" + depends on USB_STORAGE + ---help--- + Say Y here if you want to use USB Mass Store devices based + on the In-Systems Design ISD-200 USB/ATA bridge. + + Some of the products that use this chip are: + + - Archos Jukebox 6000 + - ISD SmartCable for Storage + - Taiwan Skymaster CD530U/DEL-0241 IDE bridge + - Sony CRX10U CD-R/RW drive + - CyQ've CQ8060A CDRW drive + - Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U) + + If this driver is compiled as a module, it will be named ums-isd200. + +config USB_STORAGE_USBAT + tristate "USBAT/USBAT02-based storage support" + depends on USB_STORAGE + help + Say Y here to include additional code to support storage devices + based on the SCM/Shuttle USBAT/USBAT02 processors. + + Devices reported to work with this driver include: + - CompactFlash reader included with Kodak DC3800 camera + - Dane-Elec Zmate CompactFlash reader + - Delkin Efilm reader2 + - HP 8200e/8210e/8230e CD-Writer Plus drives + - I-JAM JS-50U + - Jessops CompactFlash JESDCFRU BLACK + - Kingston Technology PCREAD-USB/CF + - Maxell UA4 CompactFlash reader + - Memorex UCF-100 + - Microtech ZiO! ICS-45 CF2 + - RCA LYRA MP3 portable + - Sandisk ImageMate SDDR-05b + + If this driver is compiled as a module, it will be named ums-usbat. + +config USB_STORAGE_SDDR09 + tristate "SanDisk SDDR-09 (and other SmartMedia, including DPCM) support" + depends on USB_STORAGE + help + Say Y here to include additional code to support the Sandisk SDDR-09 + SmartMedia reader in the USB Mass Storage driver. + Also works for the Microtech Zio! CompactFlash/SmartMedia reader. + + If this driver is compiled as a module, it will be named ums-sddr09. + +config USB_STORAGE_SDDR55 + tristate "SanDisk SDDR-55 SmartMedia support" + depends on USB_STORAGE + help + Say Y here to include additional code to support the Sandisk SDDR-55 + SmartMedia reader in the USB Mass Storage driver. + + If this driver is compiled as a module, it will be named ums-sddr55. + +config USB_STORAGE_JUMPSHOT + tristate "Lexar Jumpshot Compact Flash Reader" + depends on USB_STORAGE + help + Say Y here to include additional code to support the Lexar Jumpshot + USB CompactFlash reader. + + If this driver is compiled as a module, it will be named ums-jumpshot. + +config USB_STORAGE_ALAUDA + tristate "Olympus MAUSB-10/Fuji DPC-R1 support" + depends on USB_STORAGE + help + Say Y here to include additional code to support the Olympus MAUSB-10 + and Fujifilm DPC-R1 USB Card reader/writer devices. + + These devices are based on the Alauda chip and support both + XD and SmartMedia cards. + + If this driver is compiled as a module, it will be named ums-alauda. + +config USB_STORAGE_ONETOUCH + tristate "Support OneTouch Button on Maxtor Hard Drives" + depends on USB_STORAGE + depends on INPUT=y || INPUT=USB_STORAGE + help + Say Y here to include additional code to support the Maxtor OneTouch + USB hard drive's onetouch button. + + This code registers the button on the front of Maxtor OneTouch USB + hard drive's as an input device. An action can be associated with + this input in any keybinding software. (e.g. gnome's keyboard short- + cuts) + + If this driver is compiled as a module, it will be named ums-onetouch. + +config USB_STORAGE_KARMA + tristate "Support for Rio Karma music player" + depends on USB_STORAGE + help + Say Y here to include additional code to support the Rio Karma + USB interface. + + This code places the Rio Karma into mass storage mode, enabling + it to be mounted as an ordinary filesystem. Performing an eject + on the resulting scsi device node returns the Karma to normal + operation. + + If this driver is compiled as a module, it will be named ums-karma. + +config USB_STORAGE_CYPRESS_ATACB + tristate "SAT emulation on Cypress USB/ATA Bridge with ATACB" + depends on USB_STORAGE + ---help--- + Say Y here if you want to use SAT (ata pass through) on devices based + on the Cypress USB/ATA bridge supporting ATACB. This will allow you + to use tools to tune and monitor your drive (like hdparm or smartctl). + + If you say no here your device will still work with the standard usb + mass storage class. + + If this driver is compiled as a module, it will be named ums-cypress. + +config USB_STORAGE_ENE_UB6250 + tristate "USB ENE card reader support" + depends on SCSI + depends on USB_STORAGE + ---help--- + Say Y here if you wish to control a ENE SD/MS Card reader. + Note that this driver does not support SM cards. + + This option depends on 'SCSI' support being enabled, but you + probably also need 'SCSI device support: SCSI disk support' + (BLK_DEV_SD) for most USB storage devices. + + To compile this driver as a module, choose M here: the + module will be called ums-eneub6250. + +config USB_UAS + tristate "USB Attached SCSI" + depends on SCSI && USB_STORAGE + help + The USB Attached SCSI protocol is supported by some USB + storage devices. It permits higher performance by supporting + multiple outstanding commands. + + If you don't know whether you have a UAS device, it is safe to + say 'Y' or 'M' here and the kernel will use the right driver. + + If you compile this driver as a module, it will be named uas. diff --git a/kernel/drivers/usb/storage/Makefile b/kernel/drivers/usb/storage/Makefile new file mode 100644 index 000000000..4cd55481b --- /dev/null +++ b/kernel/drivers/usb/storage/Makefile @@ -0,0 +1,44 @@ +# +# Makefile for the USB Mass Storage device drivers. +# +# 15 Aug 2000, Christoph Hellwig <hch@infradead.org> +# Rewritten to use lists instead of if-statements. +# + +ccflags-y := -Idrivers/scsi + +obj-$(CONFIG_USB_UAS) += uas.o +obj-$(CONFIG_USB_STORAGE) += usb-storage.o + +usb-storage-y := scsiglue.o protocol.o transport.o usb.o +usb-storage-y += initializers.o sierra_ms.o option_ms.o +usb-storage-y += usual-tables.o +usb-storage-$(CONFIG_USB_STORAGE_DEBUG) += debug.o + +obj-$(CONFIG_USB_STORAGE_ALAUDA) += ums-alauda.o +obj-$(CONFIG_USB_STORAGE_CYPRESS_ATACB) += ums-cypress.o +obj-$(CONFIG_USB_STORAGE_DATAFAB) += ums-datafab.o +obj-$(CONFIG_USB_STORAGE_ENE_UB6250) += ums-eneub6250.o +obj-$(CONFIG_USB_STORAGE_FREECOM) += ums-freecom.o +obj-$(CONFIG_USB_STORAGE_ISD200) += ums-isd200.o +obj-$(CONFIG_USB_STORAGE_JUMPSHOT) += ums-jumpshot.o +obj-$(CONFIG_USB_STORAGE_KARMA) += ums-karma.o +obj-$(CONFIG_USB_STORAGE_ONETOUCH) += ums-onetouch.o +obj-$(CONFIG_USB_STORAGE_REALTEK) += ums-realtek.o +obj-$(CONFIG_USB_STORAGE_SDDR09) += ums-sddr09.o +obj-$(CONFIG_USB_STORAGE_SDDR55) += ums-sddr55.o +obj-$(CONFIG_USB_STORAGE_USBAT) += ums-usbat.o + +ums-alauda-y := alauda.o +ums-cypress-y := cypress_atacb.o +ums-datafab-y := datafab.o +ums-eneub6250-y := ene_ub6250.o +ums-freecom-y := freecom.o +ums-isd200-y := isd200.o +ums-jumpshot-y := jumpshot.o +ums-karma-y := karma.o +ums-onetouch-y := onetouch.o +ums-realtek-y := realtek_cr.o +ums-sddr09-y := sddr09.o +ums-sddr55-y := sddr55.o +ums-usbat-y := shuttle_usbat.o diff --git a/kernel/drivers/usb/storage/alauda.c b/kernel/drivers/usb/storage/alauda.c new file mode 100644 index 000000000..4b55ab66a --- /dev/null +++ b/kernel/drivers/usb/storage/alauda.c @@ -0,0 +1,1269 @@ +/* + * Driver for Alauda-based card readers + * + * Current development and maintenance by: + * (c) 2005 Daniel Drake <dsd@gentoo.org> + * + * The 'Alauda' is a chip manufacturered by RATOC for OEM use. + * + * Alauda implements a vendor-specific command set to access two media reader + * ports (XD, SmartMedia). This driver converts SCSI commands to the commands + * which are accepted by these devices. + * + * The driver was developed through reverse-engineering, with the help of the + * sddr09 driver which has many similarities, and with some help from the + * (very old) vendor-supplied GPL sma03 driver. + * + * For protocol info, see http://alauda.sourceforge.net + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/slab.h> + +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_device.h> + +#include "usb.h" +#include "transport.h" +#include "protocol.h" +#include "debug.h" + +MODULE_DESCRIPTION("Driver for Alauda-based card readers"); +MODULE_AUTHOR("Daniel Drake <dsd@gentoo.org>"); +MODULE_LICENSE("GPL"); + +/* + * Status bytes + */ +#define ALAUDA_STATUS_ERROR 0x01 +#define ALAUDA_STATUS_READY 0x40 + +/* + * Control opcodes (for request field) + */ +#define ALAUDA_GET_XD_MEDIA_STATUS 0x08 +#define ALAUDA_GET_SM_MEDIA_STATUS 0x98 +#define ALAUDA_ACK_XD_MEDIA_CHANGE 0x0a +#define ALAUDA_ACK_SM_MEDIA_CHANGE 0x9a +#define ALAUDA_GET_XD_MEDIA_SIG 0x86 +#define ALAUDA_GET_SM_MEDIA_SIG 0x96 + +/* + * Bulk command identity (byte 0) + */ +#define ALAUDA_BULK_CMD 0x40 + +/* + * Bulk opcodes (byte 1) + */ +#define ALAUDA_BULK_GET_REDU_DATA 0x85 +#define ALAUDA_BULK_READ_BLOCK 0x94 +#define ALAUDA_BULK_ERASE_BLOCK 0xa3 +#define ALAUDA_BULK_WRITE_BLOCK 0xb4 +#define ALAUDA_BULK_GET_STATUS2 0xb7 +#define ALAUDA_BULK_RESET_MEDIA 0xe0 + +/* + * Port to operate on (byte 8) + */ +#define ALAUDA_PORT_XD 0x00 +#define ALAUDA_PORT_SM 0x01 + +/* + * LBA and PBA are unsigned ints. Special values. + */ +#define UNDEF 0xffff +#define SPARE 0xfffe +#define UNUSABLE 0xfffd + +struct alauda_media_info { + unsigned long capacity; /* total media size in bytes */ + unsigned int pagesize; /* page size in bytes */ + unsigned int blocksize; /* number of pages per block */ + unsigned int uzonesize; /* number of usable blocks per zone */ + unsigned int zonesize; /* number of blocks per zone */ + unsigned int blockmask; /* mask to get page from address */ + + unsigned char pageshift; + unsigned char blockshift; + unsigned char zoneshift; + + u16 **lba_to_pba; /* logical to physical block map */ + u16 **pba_to_lba; /* physical to logical block map */ +}; + +struct alauda_info { + struct alauda_media_info port[2]; + int wr_ep; /* endpoint to write data out of */ + + unsigned char sense_key; + unsigned long sense_asc; /* additional sense code */ + unsigned long sense_ascq; /* additional sense code qualifier */ +}; + +#define short_pack(lsb,msb) ( ((u16)(lsb)) | ( ((u16)(msb))<<8 ) ) +#define LSB_of(s) ((s)&0xFF) +#define MSB_of(s) ((s)>>8) + +#define MEDIA_PORT(us) us->srb->device->lun +#define MEDIA_INFO(us) ((struct alauda_info *)us->extra)->port[MEDIA_PORT(us)] + +#define PBA_LO(pba) ((pba & 0xF) << 5) +#define PBA_HI(pba) (pba >> 3) +#define PBA_ZONE(pba) (pba >> 11) + +static int init_alauda(struct us_data *us); + + +/* + * The table of devices + */ +#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ + vendorName, productName, useProtocol, useTransport, \ + initFunction, flags) \ +{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ + .driver_info = (flags) } + +static struct usb_device_id alauda_usb_ids[] = { +# include "unusual_alauda.h" + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, alauda_usb_ids); + +#undef UNUSUAL_DEV + +/* + * The flags table + */ +#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \ + vendor_name, product_name, use_protocol, use_transport, \ + init_function, Flags) \ +{ \ + .vendorName = vendor_name, \ + .productName = product_name, \ + .useProtocol = use_protocol, \ + .useTransport = use_transport, \ + .initFunction = init_function, \ +} + +static struct us_unusual_dev alauda_unusual_dev_list[] = { +# include "unusual_alauda.h" + { } /* Terminating entry */ +}; + +#undef UNUSUAL_DEV + + +/* + * Media handling + */ + +struct alauda_card_info { + unsigned char id; /* id byte */ + unsigned char chipshift; /* 1<<cs bytes total capacity */ + unsigned char pageshift; /* 1<<ps bytes in a page */ + unsigned char blockshift; /* 1<<bs pages per block */ + unsigned char zoneshift; /* 1<<zs blocks per zone */ +}; + +static struct alauda_card_info alauda_card_ids[] = { + /* NAND flash */ + { 0x6e, 20, 8, 4, 8}, /* 1 MB */ + { 0xe8, 20, 8, 4, 8}, /* 1 MB */ + { 0xec, 20, 8, 4, 8}, /* 1 MB */ + { 0x64, 21, 8, 4, 9}, /* 2 MB */ + { 0xea, 21, 8, 4, 9}, /* 2 MB */ + { 0x6b, 22, 9, 4, 9}, /* 4 MB */ + { 0xe3, 22, 9, 4, 9}, /* 4 MB */ + { 0xe5, 22, 9, 4, 9}, /* 4 MB */ + { 0xe6, 23, 9, 4, 10}, /* 8 MB */ + { 0x73, 24, 9, 5, 10}, /* 16 MB */ + { 0x75, 25, 9, 5, 10}, /* 32 MB */ + { 0x76, 26, 9, 5, 10}, /* 64 MB */ + { 0x79, 27, 9, 5, 10}, /* 128 MB */ + { 0x71, 28, 9, 5, 10}, /* 256 MB */ + + /* MASK ROM */ + { 0x5d, 21, 9, 4, 8}, /* 2 MB */ + { 0xd5, 22, 9, 4, 9}, /* 4 MB */ + { 0xd6, 23, 9, 4, 10}, /* 8 MB */ + { 0x57, 24, 9, 4, 11}, /* 16 MB */ + { 0x58, 25, 9, 4, 12}, /* 32 MB */ + { 0,} +}; + +static struct alauda_card_info *alauda_card_find_id(unsigned char id) +{ + int i; + + for (i = 0; alauda_card_ids[i].id != 0; i++) + if (alauda_card_ids[i].id == id) + return &(alauda_card_ids[i]); + return NULL; +} + +/* + * ECC computation. + */ + +static unsigned char parity[256]; +static unsigned char ecc2[256]; + +static void nand_init_ecc(void) +{ + int i, j, a; + + parity[0] = 0; + for (i = 1; i < 256; i++) + parity[i] = (parity[i&(i-1)] ^ 1); + + for (i = 0; i < 256; i++) { + a = 0; + for (j = 0; j < 8; j++) { + if (i & (1<<j)) { + if ((j & 1) == 0) + a ^= 0x04; + if ((j & 2) == 0) + a ^= 0x10; + if ((j & 4) == 0) + a ^= 0x40; + } + } + ecc2[i] = ~(a ^ (a<<1) ^ (parity[i] ? 0xa8 : 0)); + } +} + +/* compute 3-byte ecc on 256 bytes */ +static void nand_compute_ecc(unsigned char *data, unsigned char *ecc) +{ + int i, j, a; + unsigned char par = 0, bit, bits[8] = {0}; + + /* collect 16 checksum bits */ + for (i = 0; i < 256; i++) { + par ^= data[i]; + bit = parity[data[i]]; + for (j = 0; j < 8; j++) + if ((i & (1<<j)) == 0) + bits[j] ^= bit; + } + + /* put 4+4+4 = 12 bits in the ecc */ + a = (bits[3] << 6) + (bits[2] << 4) + (bits[1] << 2) + bits[0]; + ecc[0] = ~(a ^ (a<<1) ^ (parity[par] ? 0xaa : 0)); + + a = (bits[7] << 6) + (bits[6] << 4) + (bits[5] << 2) + bits[4]; + ecc[1] = ~(a ^ (a<<1) ^ (parity[par] ? 0xaa : 0)); + + ecc[2] = ecc2[par]; +} + +static int nand_compare_ecc(unsigned char *data, unsigned char *ecc) +{ + return (data[0] == ecc[0] && data[1] == ecc[1] && data[2] == ecc[2]); +} + +static void nand_store_ecc(unsigned char *data, unsigned char *ecc) +{ + memcpy(data, ecc, 3); +} + +/* + * Alauda driver + */ + +/* + * Forget our PBA <---> LBA mappings for a particular port + */ +static void alauda_free_maps (struct alauda_media_info *media_info) +{ + unsigned int shift = media_info->zoneshift + + media_info->blockshift + media_info->pageshift; + unsigned int num_zones = media_info->capacity >> shift; + unsigned int i; + + if (media_info->lba_to_pba != NULL) + for (i = 0; i < num_zones; i++) { + kfree(media_info->lba_to_pba[i]); + media_info->lba_to_pba[i] = NULL; + } + + if (media_info->pba_to_lba != NULL) + for (i = 0; i < num_zones; i++) { + kfree(media_info->pba_to_lba[i]); + media_info->pba_to_lba[i] = NULL; + } +} + +/* + * Returns 2 bytes of status data + * The first byte describes media status, and second byte describes door status + */ +static int alauda_get_media_status(struct us_data *us, unsigned char *data) +{ + int rc; + unsigned char command; + + if (MEDIA_PORT(us) == ALAUDA_PORT_XD) + command = ALAUDA_GET_XD_MEDIA_STATUS; + else + command = ALAUDA_GET_SM_MEDIA_STATUS; + + rc = usb_stor_ctrl_transfer(us, us->recv_ctrl_pipe, + command, 0xc0, 0, 1, data, 2); + + usb_stor_dbg(us, "Media status %02X %02X\n", data[0], data[1]); + + return rc; +} + +/* + * Clears the "media was changed" bit so that we know when it changes again + * in the future. + */ +static int alauda_ack_media(struct us_data *us) +{ + unsigned char command; + + if (MEDIA_PORT(us) == ALAUDA_PORT_XD) + command = ALAUDA_ACK_XD_MEDIA_CHANGE; + else + command = ALAUDA_ACK_SM_MEDIA_CHANGE; + + return usb_stor_ctrl_transfer(us, us->send_ctrl_pipe, + command, 0x40, 0, 1, NULL, 0); +} + +/* + * Retrieves a 4-byte media signature, which indicates manufacturer, capacity, + * and some other details. + */ +static int alauda_get_media_signature(struct us_data *us, unsigned char *data) +{ + unsigned char command; + + if (MEDIA_PORT(us) == ALAUDA_PORT_XD) + command = ALAUDA_GET_XD_MEDIA_SIG; + else + command = ALAUDA_GET_SM_MEDIA_SIG; + + return usb_stor_ctrl_transfer(us, us->recv_ctrl_pipe, + command, 0xc0, 0, 0, data, 4); +} + +/* + * Resets the media status (but not the whole device?) + */ +static int alauda_reset_media(struct us_data *us) +{ + unsigned char *command = us->iobuf; + + memset(command, 0, 9); + command[0] = ALAUDA_BULK_CMD; + command[1] = ALAUDA_BULK_RESET_MEDIA; + command[8] = MEDIA_PORT(us); + + return usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, + command, 9, NULL); +} + +/* + * Examines the media and deduces capacity, etc. + */ +static int alauda_init_media(struct us_data *us) +{ + unsigned char *data = us->iobuf; + int ready = 0; + struct alauda_card_info *media_info; + unsigned int num_zones; + + while (ready == 0) { + msleep(20); + + if (alauda_get_media_status(us, data) != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + if (data[0] & 0x10) + ready = 1; + } + + usb_stor_dbg(us, "We are ready for action!\n"); + + if (alauda_ack_media(us) != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + msleep(10); + + if (alauda_get_media_status(us, data) != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + if (data[0] != 0x14) { + usb_stor_dbg(us, "Media not ready after ack\n"); + return USB_STOR_TRANSPORT_ERROR; + } + + if (alauda_get_media_signature(us, data) != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + usb_stor_dbg(us, "Media signature: %4ph\n", data); + media_info = alauda_card_find_id(data[1]); + if (media_info == NULL) { + pr_warn("alauda_init_media: Unrecognised media signature: %4ph\n", + data); + return USB_STOR_TRANSPORT_ERROR; + } + + MEDIA_INFO(us).capacity = 1 << media_info->chipshift; + usb_stor_dbg(us, "Found media with capacity: %ldMB\n", + MEDIA_INFO(us).capacity >> 20); + + MEDIA_INFO(us).pageshift = media_info->pageshift; + MEDIA_INFO(us).blockshift = media_info->blockshift; + MEDIA_INFO(us).zoneshift = media_info->zoneshift; + + MEDIA_INFO(us).pagesize = 1 << media_info->pageshift; + MEDIA_INFO(us).blocksize = 1 << media_info->blockshift; + MEDIA_INFO(us).zonesize = 1 << media_info->zoneshift; + + MEDIA_INFO(us).uzonesize = ((1 << media_info->zoneshift) / 128) * 125; + MEDIA_INFO(us).blockmask = MEDIA_INFO(us).blocksize - 1; + + num_zones = MEDIA_INFO(us).capacity >> (MEDIA_INFO(us).zoneshift + + MEDIA_INFO(us).blockshift + MEDIA_INFO(us).pageshift); + MEDIA_INFO(us).pba_to_lba = kcalloc(num_zones, sizeof(u16*), GFP_NOIO); + MEDIA_INFO(us).lba_to_pba = kcalloc(num_zones, sizeof(u16*), GFP_NOIO); + + if (alauda_reset_media(us) != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + return USB_STOR_TRANSPORT_GOOD; +} + +/* + * Examines the media status and does the right thing when the media has gone, + * appeared, or changed. + */ +static int alauda_check_media(struct us_data *us) +{ + struct alauda_info *info = (struct alauda_info *) us->extra; + unsigned char status[2]; + int rc; + + rc = alauda_get_media_status(us, status); + + /* Check for no media or door open */ + if ((status[0] & 0x80) || ((status[0] & 0x1F) == 0x10) + || ((status[1] & 0x01) == 0)) { + usb_stor_dbg(us, "No media, or door open\n"); + alauda_free_maps(&MEDIA_INFO(us)); + info->sense_key = 0x02; + info->sense_asc = 0x3A; + info->sense_ascq = 0x00; + return USB_STOR_TRANSPORT_FAILED; + } + + /* Check for media change */ + if (status[0] & 0x08) { + usb_stor_dbg(us, "Media change detected\n"); + alauda_free_maps(&MEDIA_INFO(us)); + alauda_init_media(us); + + info->sense_key = UNIT_ATTENTION; + info->sense_asc = 0x28; + info->sense_ascq = 0x00; + return USB_STOR_TRANSPORT_FAILED; + } + + return USB_STOR_TRANSPORT_GOOD; +} + +/* + * Checks the status from the 2nd status register + * Returns 3 bytes of status data, only the first is known + */ +static int alauda_check_status2(struct us_data *us) +{ + int rc; + unsigned char command[] = { + ALAUDA_BULK_CMD, ALAUDA_BULK_GET_STATUS2, + 0, 0, 0, 0, 3, 0, MEDIA_PORT(us) + }; + unsigned char data[3]; + + rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, + command, 9, NULL); + if (rc != USB_STOR_XFER_GOOD) + return rc; + + rc = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, + data, 3, NULL); + if (rc != USB_STOR_XFER_GOOD) + return rc; + + usb_stor_dbg(us, "%3ph\n", data); + if (data[0] & ALAUDA_STATUS_ERROR) + return USB_STOR_XFER_ERROR; + + return USB_STOR_XFER_GOOD; +} + +/* + * Gets the redundancy data for the first page of a PBA + * Returns 16 bytes. + */ +static int alauda_get_redu_data(struct us_data *us, u16 pba, unsigned char *data) +{ + int rc; + unsigned char command[] = { + ALAUDA_BULK_CMD, ALAUDA_BULK_GET_REDU_DATA, + PBA_HI(pba), PBA_ZONE(pba), 0, PBA_LO(pba), 0, 0, MEDIA_PORT(us) + }; + + rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, + command, 9, NULL); + if (rc != USB_STOR_XFER_GOOD) + return rc; + + return usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, + data, 16, NULL); +} + +/* + * Finds the first unused PBA in a zone + * Returns the absolute PBA of an unused PBA, or 0 if none found. + */ +static u16 alauda_find_unused_pba(struct alauda_media_info *info, + unsigned int zone) +{ + u16 *pba_to_lba = info->pba_to_lba[zone]; + unsigned int i; + + for (i = 0; i < info->zonesize; i++) + if (pba_to_lba[i] == UNDEF) + return (zone << info->zoneshift) + i; + + return 0; +} + +/* + * Reads the redundancy data for all PBA's in a zone + * Produces lba <--> pba mappings + */ +static int alauda_read_map(struct us_data *us, unsigned int zone) +{ + unsigned char *data = us->iobuf; + int result; + int i, j; + unsigned int zonesize = MEDIA_INFO(us).zonesize; + unsigned int uzonesize = MEDIA_INFO(us).uzonesize; + unsigned int lba_offset, lba_real, blocknum; + unsigned int zone_base_lba = zone * uzonesize; + unsigned int zone_base_pba = zone * zonesize; + u16 *lba_to_pba = kcalloc(zonesize, sizeof(u16), GFP_NOIO); + u16 *pba_to_lba = kcalloc(zonesize, sizeof(u16), GFP_NOIO); + if (lba_to_pba == NULL || pba_to_lba == NULL) { + result = USB_STOR_TRANSPORT_ERROR; + goto error; + } + + usb_stor_dbg(us, "Mapping blocks for zone %d\n", zone); + + /* 1024 PBA's per zone */ + for (i = 0; i < zonesize; i++) + lba_to_pba[i] = pba_to_lba[i] = UNDEF; + + for (i = 0; i < zonesize; i++) { + blocknum = zone_base_pba + i; + + result = alauda_get_redu_data(us, blocknum, data); + if (result != USB_STOR_XFER_GOOD) { + result = USB_STOR_TRANSPORT_ERROR; + goto error; + } + + /* special PBAs have control field 0^16 */ + for (j = 0; j < 16; j++) + if (data[j] != 0) + goto nonz; + pba_to_lba[i] = UNUSABLE; + usb_stor_dbg(us, "PBA %d has no logical mapping\n", blocknum); + continue; + + nonz: + /* unwritten PBAs have control field FF^16 */ + for (j = 0; j < 16; j++) + if (data[j] != 0xff) + goto nonff; + continue; + + nonff: + /* normal PBAs start with six FFs */ + if (j < 6) { + usb_stor_dbg(us, "PBA %d has no logical mapping: reserved area = %02X%02X%02X%02X data status %02X block status %02X\n", + blocknum, + data[0], data[1], data[2], data[3], + data[4], data[5]); + pba_to_lba[i] = UNUSABLE; + continue; + } + + if ((data[6] >> 4) != 0x01) { + usb_stor_dbg(us, "PBA %d has invalid address field %02X%02X/%02X%02X\n", + blocknum, data[6], data[7], + data[11], data[12]); + pba_to_lba[i] = UNUSABLE; + continue; + } + + /* check even parity */ + if (parity[data[6] ^ data[7]]) { + printk(KERN_WARNING + "alauda_read_map: Bad parity in LBA for block %d" + " (%02X %02X)\n", i, data[6], data[7]); + pba_to_lba[i] = UNUSABLE; + continue; + } + + lba_offset = short_pack(data[7], data[6]); + lba_offset = (lba_offset & 0x07FF) >> 1; + lba_real = lba_offset + zone_base_lba; + + /* + * Every 1024 physical blocks ("zone"), the LBA numbers + * go back to zero, but are within a higher block of LBA's. + * Also, there is a maximum of 1000 LBA's per zone. + * In other words, in PBA 1024-2047 you will find LBA 0-999 + * which are really LBA 1000-1999. This allows for 24 bad + * or special physical blocks per zone. + */ + + if (lba_offset >= uzonesize) { + printk(KERN_WARNING + "alauda_read_map: Bad low LBA %d for block %d\n", + lba_real, blocknum); + continue; + } + + if (lba_to_pba[lba_offset] != UNDEF) { + printk(KERN_WARNING + "alauda_read_map: " + "LBA %d seen for PBA %d and %d\n", + lba_real, lba_to_pba[lba_offset], blocknum); + continue; + } + + pba_to_lba[i] = lba_real; + lba_to_pba[lba_offset] = blocknum; + continue; + } + + MEDIA_INFO(us).lba_to_pba[zone] = lba_to_pba; + MEDIA_INFO(us).pba_to_lba[zone] = pba_to_lba; + result = 0; + goto out; + +error: + kfree(lba_to_pba); + kfree(pba_to_lba); +out: + return result; +} + +/* + * Checks to see whether we have already mapped a certain zone + * If we haven't, the map is generated + */ +static void alauda_ensure_map_for_zone(struct us_data *us, unsigned int zone) +{ + if (MEDIA_INFO(us).lba_to_pba[zone] == NULL + || MEDIA_INFO(us).pba_to_lba[zone] == NULL) + alauda_read_map(us, zone); +} + +/* + * Erases an entire block + */ +static int alauda_erase_block(struct us_data *us, u16 pba) +{ + int rc; + unsigned char command[] = { + ALAUDA_BULK_CMD, ALAUDA_BULK_ERASE_BLOCK, PBA_HI(pba), + PBA_ZONE(pba), 0, PBA_LO(pba), 0x02, 0, MEDIA_PORT(us) + }; + unsigned char buf[2]; + + usb_stor_dbg(us, "Erasing PBA %d\n", pba); + + rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, + command, 9, NULL); + if (rc != USB_STOR_XFER_GOOD) + return rc; + + rc = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, + buf, 2, NULL); + if (rc != USB_STOR_XFER_GOOD) + return rc; + + usb_stor_dbg(us, "Erase result: %02X %02X\n", buf[0], buf[1]); + return rc; +} + +/* + * Reads data from a certain offset page inside a PBA, including interleaved + * redundancy data. Returns (pagesize+64)*pages bytes in data. + */ +static int alauda_read_block_raw(struct us_data *us, u16 pba, + unsigned int page, unsigned int pages, unsigned char *data) +{ + int rc; + unsigned char command[] = { + ALAUDA_BULK_CMD, ALAUDA_BULK_READ_BLOCK, PBA_HI(pba), + PBA_ZONE(pba), 0, PBA_LO(pba) + page, pages, 0, MEDIA_PORT(us) + }; + + usb_stor_dbg(us, "pba %d page %d count %d\n", pba, page, pages); + + rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, + command, 9, NULL); + if (rc != USB_STOR_XFER_GOOD) + return rc; + + return usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, + data, (MEDIA_INFO(us).pagesize + 64) * pages, NULL); +} + +/* + * Reads data from a certain offset page inside a PBA, excluding redundancy + * data. Returns pagesize*pages bytes in data. Note that data must be big enough + * to hold (pagesize+64)*pages bytes of data, but you can ignore those 'extra' + * trailing bytes outside this function. + */ +static int alauda_read_block(struct us_data *us, u16 pba, + unsigned int page, unsigned int pages, unsigned char *data) +{ + int i, rc; + unsigned int pagesize = MEDIA_INFO(us).pagesize; + + rc = alauda_read_block_raw(us, pba, page, pages, data); + if (rc != USB_STOR_XFER_GOOD) + return rc; + + /* Cut out the redundancy data */ + for (i = 0; i < pages; i++) { + int dest_offset = i * pagesize; + int src_offset = i * (pagesize + 64); + memmove(data + dest_offset, data + src_offset, pagesize); + } + + return rc; +} + +/* + * Writes an entire block of data and checks status after write. + * Redundancy data must be already included in data. Data should be + * (pagesize+64)*blocksize bytes in length. + */ +static int alauda_write_block(struct us_data *us, u16 pba, unsigned char *data) +{ + int rc; + struct alauda_info *info = (struct alauda_info *) us->extra; + unsigned char command[] = { + ALAUDA_BULK_CMD, ALAUDA_BULK_WRITE_BLOCK, PBA_HI(pba), + PBA_ZONE(pba), 0, PBA_LO(pba), 32, 0, MEDIA_PORT(us) + }; + + usb_stor_dbg(us, "pba %d\n", pba); + + rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, + command, 9, NULL); + if (rc != USB_STOR_XFER_GOOD) + return rc; + + rc = usb_stor_bulk_transfer_buf(us, info->wr_ep, data, + (MEDIA_INFO(us).pagesize + 64) * MEDIA_INFO(us).blocksize, + NULL); + if (rc != USB_STOR_XFER_GOOD) + return rc; + + return alauda_check_status2(us); +} + +/* + * Write some data to a specific LBA. + */ +static int alauda_write_lba(struct us_data *us, u16 lba, + unsigned int page, unsigned int pages, + unsigned char *ptr, unsigned char *blockbuffer) +{ + u16 pba, lbap, new_pba; + unsigned char *bptr, *cptr, *xptr; + unsigned char ecc[3]; + int i, result; + unsigned int uzonesize = MEDIA_INFO(us).uzonesize; + unsigned int zonesize = MEDIA_INFO(us).zonesize; + unsigned int pagesize = MEDIA_INFO(us).pagesize; + unsigned int blocksize = MEDIA_INFO(us).blocksize; + unsigned int lba_offset = lba % uzonesize; + unsigned int new_pba_offset; + unsigned int zone = lba / uzonesize; + + alauda_ensure_map_for_zone(us, zone); + + pba = MEDIA_INFO(us).lba_to_pba[zone][lba_offset]; + if (pba == 1) { + /* Maybe it is impossible to write to PBA 1. + Fake success, but don't do anything. */ + printk(KERN_WARNING + "alauda_write_lba: avoid writing to pba 1\n"); + return USB_STOR_TRANSPORT_GOOD; + } + + new_pba = alauda_find_unused_pba(&MEDIA_INFO(us), zone); + if (!new_pba) { + printk(KERN_WARNING + "alauda_write_lba: Out of unused blocks\n"); + return USB_STOR_TRANSPORT_ERROR; + } + + /* read old contents */ + if (pba != UNDEF) { + result = alauda_read_block_raw(us, pba, 0, + blocksize, blockbuffer); + if (result != USB_STOR_XFER_GOOD) + return result; + } else { + memset(blockbuffer, 0, blocksize * (pagesize + 64)); + } + + lbap = (lba_offset << 1) | 0x1000; + if (parity[MSB_of(lbap) ^ LSB_of(lbap)]) + lbap ^= 1; + + /* check old contents and fill lba */ + for (i = 0; i < blocksize; i++) { + bptr = blockbuffer + (i * (pagesize + 64)); + cptr = bptr + pagesize; + nand_compute_ecc(bptr, ecc); + if (!nand_compare_ecc(cptr+13, ecc)) { + usb_stor_dbg(us, "Warning: bad ecc in page %d- of pba %d\n", + i, pba); + nand_store_ecc(cptr+13, ecc); + } + nand_compute_ecc(bptr + (pagesize / 2), ecc); + if (!nand_compare_ecc(cptr+8, ecc)) { + usb_stor_dbg(us, "Warning: bad ecc in page %d+ of pba %d\n", + i, pba); + nand_store_ecc(cptr+8, ecc); + } + cptr[6] = cptr[11] = MSB_of(lbap); + cptr[7] = cptr[12] = LSB_of(lbap); + } + + /* copy in new stuff and compute ECC */ + xptr = ptr; + for (i = page; i < page+pages; i++) { + bptr = blockbuffer + (i * (pagesize + 64)); + cptr = bptr + pagesize; + memcpy(bptr, xptr, pagesize); + xptr += pagesize; + nand_compute_ecc(bptr, ecc); + nand_store_ecc(cptr+13, ecc); + nand_compute_ecc(bptr + (pagesize / 2), ecc); + nand_store_ecc(cptr+8, ecc); + } + + result = alauda_write_block(us, new_pba, blockbuffer); + if (result != USB_STOR_XFER_GOOD) + return result; + + new_pba_offset = new_pba - (zone * zonesize); + MEDIA_INFO(us).pba_to_lba[zone][new_pba_offset] = lba; + MEDIA_INFO(us).lba_to_pba[zone][lba_offset] = new_pba; + usb_stor_dbg(us, "Remapped LBA %d to PBA %d\n", lba, new_pba); + + if (pba != UNDEF) { + unsigned int pba_offset = pba - (zone * zonesize); + result = alauda_erase_block(us, pba); + if (result != USB_STOR_XFER_GOOD) + return result; + MEDIA_INFO(us).pba_to_lba[zone][pba_offset] = UNDEF; + } + + return USB_STOR_TRANSPORT_GOOD; +} + +/* + * Read data from a specific sector address + */ +static int alauda_read_data(struct us_data *us, unsigned long address, + unsigned int sectors) +{ + unsigned char *buffer; + u16 lba, max_lba; + unsigned int page, len, offset; + unsigned int blockshift = MEDIA_INFO(us).blockshift; + unsigned int pageshift = MEDIA_INFO(us).pageshift; + unsigned int blocksize = MEDIA_INFO(us).blocksize; + unsigned int pagesize = MEDIA_INFO(us).pagesize; + unsigned int uzonesize = MEDIA_INFO(us).uzonesize; + struct scatterlist *sg; + int result; + + /* + * Since we only read in one block at a time, we have to create + * a bounce buffer and move the data a piece at a time between the + * bounce buffer and the actual transfer buffer. + * We make this buffer big enough to hold temporary redundancy data, + * which we use when reading the data blocks. + */ + + len = min(sectors, blocksize) * (pagesize + 64); + buffer = kmalloc(len, GFP_NOIO); + if (buffer == NULL) { + printk(KERN_WARNING "alauda_read_data: Out of memory\n"); + return USB_STOR_TRANSPORT_ERROR; + } + + /* Figure out the initial LBA and page */ + lba = address >> blockshift; + page = (address & MEDIA_INFO(us).blockmask); + max_lba = MEDIA_INFO(us).capacity >> (blockshift + pageshift); + + result = USB_STOR_TRANSPORT_GOOD; + offset = 0; + sg = NULL; + + while (sectors > 0) { + unsigned int zone = lba / uzonesize; /* integer division */ + unsigned int lba_offset = lba - (zone * uzonesize); + unsigned int pages; + u16 pba; + alauda_ensure_map_for_zone(us, zone); + + /* Not overflowing capacity? */ + if (lba >= max_lba) { + usb_stor_dbg(us, "Error: Requested lba %u exceeds maximum %u\n", + lba, max_lba); + result = USB_STOR_TRANSPORT_ERROR; + break; + } + + /* Find number of pages we can read in this block */ + pages = min(sectors, blocksize - page); + len = pages << pageshift; + + /* Find where this lba lives on disk */ + pba = MEDIA_INFO(us).lba_to_pba[zone][lba_offset]; + + if (pba == UNDEF) { /* this lba was never written */ + usb_stor_dbg(us, "Read %d zero pages (LBA %d) page %d\n", + pages, lba, page); + + /* This is not really an error. It just means + that the block has never been written. + Instead of returning USB_STOR_TRANSPORT_ERROR + it is better to return all zero data. */ + + memset(buffer, 0, len); + } else { + usb_stor_dbg(us, "Read %d pages, from PBA %d (LBA %d) page %d\n", + pages, pba, lba, page); + + result = alauda_read_block(us, pba, page, pages, buffer); + if (result != USB_STOR_TRANSPORT_GOOD) + break; + } + + /* Store the data in the transfer buffer */ + usb_stor_access_xfer_buf(buffer, len, us->srb, + &sg, &offset, TO_XFER_BUF); + + page = 0; + lba++; + sectors -= pages; + } + + kfree(buffer); + return result; +} + +/* + * Write data to a specific sector address + */ +static int alauda_write_data(struct us_data *us, unsigned long address, + unsigned int sectors) +{ + unsigned char *buffer, *blockbuffer; + unsigned int page, len, offset; + unsigned int blockshift = MEDIA_INFO(us).blockshift; + unsigned int pageshift = MEDIA_INFO(us).pageshift; + unsigned int blocksize = MEDIA_INFO(us).blocksize; + unsigned int pagesize = MEDIA_INFO(us).pagesize; + struct scatterlist *sg; + u16 lba, max_lba; + int result; + + /* + * Since we don't write the user data directly to the device, + * we have to create a bounce buffer and move the data a piece + * at a time between the bounce buffer and the actual transfer buffer. + */ + + len = min(sectors, blocksize) * pagesize; + buffer = kmalloc(len, GFP_NOIO); + if (buffer == NULL) { + printk(KERN_WARNING "alauda_write_data: Out of memory\n"); + return USB_STOR_TRANSPORT_ERROR; + } + + /* + * We also need a temporary block buffer, where we read in the old data, + * overwrite parts with the new data, and manipulate the redundancy data + */ + blockbuffer = kmalloc((pagesize + 64) * blocksize, GFP_NOIO); + if (blockbuffer == NULL) { + printk(KERN_WARNING "alauda_write_data: Out of memory\n"); + kfree(buffer); + return USB_STOR_TRANSPORT_ERROR; + } + + /* Figure out the initial LBA and page */ + lba = address >> blockshift; + page = (address & MEDIA_INFO(us).blockmask); + max_lba = MEDIA_INFO(us).capacity >> (pageshift + blockshift); + + result = USB_STOR_TRANSPORT_GOOD; + offset = 0; + sg = NULL; + + while (sectors > 0) { + /* Write as many sectors as possible in this block */ + unsigned int pages = min(sectors, blocksize - page); + len = pages << pageshift; + + /* Not overflowing capacity? */ + if (lba >= max_lba) { + usb_stor_dbg(us, "Requested lba %u exceeds maximum %u\n", + lba, max_lba); + result = USB_STOR_TRANSPORT_ERROR; + break; + } + + /* Get the data from the transfer buffer */ + usb_stor_access_xfer_buf(buffer, len, us->srb, + &sg, &offset, FROM_XFER_BUF); + + result = alauda_write_lba(us, lba, page, pages, buffer, + blockbuffer); + if (result != USB_STOR_TRANSPORT_GOOD) + break; + + page = 0; + lba++; + sectors -= pages; + } + + kfree(buffer); + kfree(blockbuffer); + return result; +} + +/* + * Our interface with the rest of the world + */ + +static void alauda_info_destructor(void *extra) +{ + struct alauda_info *info = (struct alauda_info *) extra; + int port; + + if (!info) + return; + + for (port = 0; port < 2; port++) { + struct alauda_media_info *media_info = &info->port[port]; + + alauda_free_maps(media_info); + kfree(media_info->lba_to_pba); + kfree(media_info->pba_to_lba); + } +} + +/* + * Initialize alauda_info struct and find the data-write endpoint + */ +static int init_alauda(struct us_data *us) +{ + struct alauda_info *info; + struct usb_host_interface *altsetting = us->pusb_intf->cur_altsetting; + nand_init_ecc(); + + us->extra = kzalloc(sizeof(struct alauda_info), GFP_NOIO); + if (!us->extra) + return USB_STOR_TRANSPORT_ERROR; + + info = (struct alauda_info *) us->extra; + us->extra_destructor = alauda_info_destructor; + + info->wr_ep = usb_sndbulkpipe(us->pusb_dev, + altsetting->endpoint[0].desc.bEndpointAddress + & USB_ENDPOINT_NUMBER_MASK); + + return USB_STOR_TRANSPORT_GOOD; +} + +static int alauda_transport(struct scsi_cmnd *srb, struct us_data *us) +{ + int rc; + struct alauda_info *info = (struct alauda_info *) us->extra; + unsigned char *ptr = us->iobuf; + static unsigned char inquiry_response[36] = { + 0x00, 0x80, 0x00, 0x01, 0x1F, 0x00, 0x00, 0x00 + }; + + if (srb->cmnd[0] == INQUIRY) { + usb_stor_dbg(us, "INQUIRY - Returning bogus response\n"); + memcpy(ptr, inquiry_response, sizeof(inquiry_response)); + fill_inquiry_response(us, ptr, 36); + return USB_STOR_TRANSPORT_GOOD; + } + + if (srb->cmnd[0] == TEST_UNIT_READY) { + usb_stor_dbg(us, "TEST_UNIT_READY\n"); + return alauda_check_media(us); + } + + if (srb->cmnd[0] == READ_CAPACITY) { + unsigned int num_zones; + unsigned long capacity; + + rc = alauda_check_media(us); + if (rc != USB_STOR_TRANSPORT_GOOD) + return rc; + + num_zones = MEDIA_INFO(us).capacity >> (MEDIA_INFO(us).zoneshift + + MEDIA_INFO(us).blockshift + MEDIA_INFO(us).pageshift); + + capacity = num_zones * MEDIA_INFO(us).uzonesize + * MEDIA_INFO(us).blocksize; + + /* Report capacity and page size */ + ((__be32 *) ptr)[0] = cpu_to_be32(capacity - 1); + ((__be32 *) ptr)[1] = cpu_to_be32(512); + + usb_stor_set_xfer_buf(ptr, 8, srb); + return USB_STOR_TRANSPORT_GOOD; + } + + if (srb->cmnd[0] == READ_10) { + unsigned int page, pages; + + rc = alauda_check_media(us); + if (rc != USB_STOR_TRANSPORT_GOOD) + return rc; + + page = short_pack(srb->cmnd[3], srb->cmnd[2]); + page <<= 16; + page |= short_pack(srb->cmnd[5], srb->cmnd[4]); + pages = short_pack(srb->cmnd[8], srb->cmnd[7]); + + usb_stor_dbg(us, "READ_10: page %d pagect %d\n", page, pages); + + return alauda_read_data(us, page, pages); + } + + if (srb->cmnd[0] == WRITE_10) { + unsigned int page, pages; + + rc = alauda_check_media(us); + if (rc != USB_STOR_TRANSPORT_GOOD) + return rc; + + page = short_pack(srb->cmnd[3], srb->cmnd[2]); + page <<= 16; + page |= short_pack(srb->cmnd[5], srb->cmnd[4]); + pages = short_pack(srb->cmnd[8], srb->cmnd[7]); + + usb_stor_dbg(us, "WRITE_10: page %d pagect %d\n", page, pages); + + return alauda_write_data(us, page, pages); + } + + if (srb->cmnd[0] == REQUEST_SENSE) { + usb_stor_dbg(us, "REQUEST_SENSE\n"); + + memset(ptr, 0, 18); + ptr[0] = 0xF0; + ptr[2] = info->sense_key; + ptr[7] = 11; + ptr[12] = info->sense_asc; + ptr[13] = info->sense_ascq; + usb_stor_set_xfer_buf(ptr, 18, srb); + + return USB_STOR_TRANSPORT_GOOD; + } + + if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) { + /* sure. whatever. not like we can stop the user from popping + the media out of the device (no locking doors, etc) */ + return USB_STOR_TRANSPORT_GOOD; + } + + usb_stor_dbg(us, "Gah! Unknown command: %d (0x%x)\n", + srb->cmnd[0], srb->cmnd[0]); + info->sense_key = 0x05; + info->sense_asc = 0x20; + info->sense_ascq = 0x00; + return USB_STOR_TRANSPORT_FAILED; +} + +static int alauda_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct us_data *us; + int result; + + result = usb_stor_probe1(&us, intf, id, + (id - alauda_usb_ids) + alauda_unusual_dev_list); + if (result) + return result; + + us->transport_name = "Alauda Control/Bulk"; + us->transport = alauda_transport; + us->transport_reset = usb_stor_Bulk_reset; + us->max_lun = 1; + + result = usb_stor_probe2(us); + return result; +} + +static struct usb_driver alauda_driver = { + .name = "ums-alauda", + .probe = alauda_probe, + .disconnect = usb_stor_disconnect, + .suspend = usb_stor_suspend, + .resume = usb_stor_resume, + .reset_resume = usb_stor_reset_resume, + .pre_reset = usb_stor_pre_reset, + .post_reset = usb_stor_post_reset, + .id_table = alauda_usb_ids, + .soft_unbind = 1, + .no_dynamic_id = 1, +}; + +module_usb_driver(alauda_driver); diff --git a/kernel/drivers/usb/storage/cypress_atacb.c b/kernel/drivers/usb/storage/cypress_atacb.c new file mode 100644 index 000000000..b3466d139 --- /dev/null +++ b/kernel/drivers/usb/storage/cypress_atacb.c @@ -0,0 +1,289 @@ +/* + * Support for emulating SAT (ata pass through) on devices based + * on the Cypress USB/ATA bridge supporting ATACB. + * + * Copyright (c) 2008 Matthieu Castet (castet.matthieu@free.fr) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_eh.h> +#include <linux/ata.h> + +#include "usb.h" +#include "protocol.h" +#include "scsiglue.h" +#include "debug.h" + +MODULE_DESCRIPTION("SAT support for Cypress USB/ATA bridges with ATACB"); +MODULE_AUTHOR("Matthieu Castet <castet.matthieu@free.fr>"); +MODULE_LICENSE("GPL"); + +/* + * The table of devices + */ +#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ + vendorName, productName, useProtocol, useTransport, \ + initFunction, flags) \ +{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ + .driver_info = (flags) } + +static struct usb_device_id cypress_usb_ids[] = { +# include "unusual_cypress.h" + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, cypress_usb_ids); + +#undef UNUSUAL_DEV + +/* + * The flags table + */ +#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \ + vendor_name, product_name, use_protocol, use_transport, \ + init_function, Flags) \ +{ \ + .vendorName = vendor_name, \ + .productName = product_name, \ + .useProtocol = use_protocol, \ + .useTransport = use_transport, \ + .initFunction = init_function, \ +} + +static struct us_unusual_dev cypress_unusual_dev_list[] = { +# include "unusual_cypress.h" + { } /* Terminating entry */ +}; + +#undef UNUSUAL_DEV + + +/* + * ATACB is a protocol used on cypress usb<->ata bridge to + * send raw ATA command over mass storage + * There is a ATACB2 protocol that support LBA48 on newer chip. + * More info that be found on cy7c68310_8.pdf and cy7c68300c_8.pdf + * datasheet from cypress.com. + */ +static void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us) +{ + unsigned char save_cmnd[MAX_COMMAND_SIZE]; + + if (likely(srb->cmnd[0] != ATA_16 && srb->cmnd[0] != ATA_12)) { + usb_stor_transparent_scsi_command(srb, us); + return; + } + + memcpy(save_cmnd, srb->cmnd, sizeof(save_cmnd)); + memset(srb->cmnd, 0, MAX_COMMAND_SIZE); + + /* check if we support the command */ + if (save_cmnd[1] >> 5) /* MULTIPLE_COUNT */ + goto invalid_fld; + /* check protocol */ + switch ((save_cmnd[1] >> 1) & 0xf) { + case 3: /*no DATA */ + case 4: /* PIO in */ + case 5: /* PIO out */ + break; + default: + goto invalid_fld; + } + + /* first build the ATACB command */ + srb->cmd_len = 16; + + srb->cmnd[0] = 0x24; /* bVSCBSignature : vendor-specific command + this value can change, but most(all ?) manufacturers + keep the cypress default : 0x24 */ + srb->cmnd[1] = 0x24; /* bVSCBSubCommand : 0x24 for ATACB */ + + srb->cmnd[3] = 0xff - 1; /* features, sector count, lba low, lba med + lba high, device, command are valid */ + srb->cmnd[4] = 1; /* TransferBlockCount : 512 */ + + if (save_cmnd[0] == ATA_16) { + srb->cmnd[ 6] = save_cmnd[ 4]; /* features */ + srb->cmnd[ 7] = save_cmnd[ 6]; /* sector count */ + srb->cmnd[ 8] = save_cmnd[ 8]; /* lba low */ + srb->cmnd[ 9] = save_cmnd[10]; /* lba med */ + srb->cmnd[10] = save_cmnd[12]; /* lba high */ + srb->cmnd[11] = save_cmnd[13]; /* device */ + srb->cmnd[12] = save_cmnd[14]; /* command */ + + if (save_cmnd[1] & 0x01) {/* extended bit set for LBA48 */ + /* this could be supported by atacb2 */ + if (save_cmnd[3] || save_cmnd[5] || save_cmnd[7] || save_cmnd[9] + || save_cmnd[11]) + goto invalid_fld; + } + } else { /* ATA12 */ + srb->cmnd[ 6] = save_cmnd[3]; /* features */ + srb->cmnd[ 7] = save_cmnd[4]; /* sector count */ + srb->cmnd[ 8] = save_cmnd[5]; /* lba low */ + srb->cmnd[ 9] = save_cmnd[6]; /* lba med */ + srb->cmnd[10] = save_cmnd[7]; /* lba high */ + srb->cmnd[11] = save_cmnd[8]; /* device */ + srb->cmnd[12] = save_cmnd[9]; /* command */ + + } + /* Filter SET_FEATURES - XFER MODE command */ + if ((srb->cmnd[12] == ATA_CMD_SET_FEATURES) + && (srb->cmnd[6] == SETFEATURES_XFER)) + goto invalid_fld; + + if (srb->cmnd[12] == ATA_CMD_ID_ATA || srb->cmnd[12] == ATA_CMD_ID_ATAPI) + srb->cmnd[2] |= (1<<7); /* set IdentifyPacketDevice for these cmds */ + + + usb_stor_transparent_scsi_command(srb, us); + + /* if the device doesn't support ATACB + */ + if (srb->result == SAM_STAT_CHECK_CONDITION && + memcmp(srb->sense_buffer, usb_stor_sense_invalidCDB, + sizeof(usb_stor_sense_invalidCDB)) == 0) { + usb_stor_dbg(us, "cypress atacb not supported ???\n"); + goto end; + } + + /* if ck_cond flags is set, and there wasn't critical error, + * build the special sense + */ + if ((srb->result != (DID_ERROR << 16) && + srb->result != (DID_ABORT << 16)) && + save_cmnd[2] & 0x20) { + struct scsi_eh_save ses; + unsigned char regs[8]; + unsigned char *sb = srb->sense_buffer; + unsigned char *desc = sb + 8; + int tmp_result; + + /* build the command for + * reading the ATA registers */ + scsi_eh_prep_cmnd(srb, &ses, NULL, 0, sizeof(regs)); + + /* we use the same command as before, but we set + * the read taskfile bit, for not executing atacb command, + * but reading register selected in srb->cmnd[4] + */ + srb->cmd_len = 16; + srb->cmnd = ses.cmnd; + srb->cmnd[2] = 1; + + usb_stor_transparent_scsi_command(srb, us); + memcpy(regs, srb->sense_buffer, sizeof(regs)); + tmp_result = srb->result; + scsi_eh_restore_cmnd(srb, &ses); + /* we fail to get registers, report invalid command */ + if (tmp_result != SAM_STAT_GOOD) + goto invalid_fld; + + /* build the sense */ + memset(sb, 0, SCSI_SENSE_BUFFERSIZE); + + /* set sk, asc for a good command */ + sb[1] = RECOVERED_ERROR; + sb[2] = 0; /* ATA PASS THROUGH INFORMATION AVAILABLE */ + sb[3] = 0x1D; + + /* XXX we should generate sk, asc, ascq from status and error + * regs + * (see 11.1 Error translation ATA device error to SCSI error + * map, and ata_to_sense_error from libata.) + */ + + /* Sense data is current and format is descriptor. */ + sb[0] = 0x72; + desc[0] = 0x09; /* ATA_RETURN_DESCRIPTOR */ + + /* set length of additional sense data */ + sb[7] = 14; + desc[1] = 12; + + /* Copy registers into sense buffer. */ + desc[ 2] = 0x00; + desc[ 3] = regs[1]; /* features */ + desc[ 5] = regs[2]; /* sector count */ + desc[ 7] = regs[3]; /* lba low */ + desc[ 9] = regs[4]; /* lba med */ + desc[11] = regs[5]; /* lba high */ + desc[12] = regs[6]; /* device */ + desc[13] = regs[7]; /* command */ + + srb->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; + } + goto end; +invalid_fld: + srb->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; + + memcpy(srb->sense_buffer, + usb_stor_sense_invalidCDB, + sizeof(usb_stor_sense_invalidCDB)); +end: + memcpy(srb->cmnd, save_cmnd, sizeof(save_cmnd)); + if (srb->cmnd[0] == ATA_12) + srb->cmd_len = 12; +} + + +static int cypress_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct us_data *us; + int result; + struct usb_device *device; + + result = usb_stor_probe1(&us, intf, id, + (id - cypress_usb_ids) + cypress_unusual_dev_list); + if (result) + return result; + + /* Among CY7C68300 chips, the A revision does not support Cypress ATACB + * Filter out this revision from EEPROM default descriptor values + */ + device = interface_to_usbdev(intf); + if (device->descriptor.iManufacturer != 0x38 || + device->descriptor.iProduct != 0x4e || + device->descriptor.iSerialNumber != 0x64) { + us->protocol_name = "Transparent SCSI with Cypress ATACB"; + us->proto_handler = cypress_atacb_passthrough; + } else { + us->protocol_name = "Transparent SCSI"; + us->proto_handler = usb_stor_transparent_scsi_command; + } + + result = usb_stor_probe2(us); + return result; +} + +static struct usb_driver cypress_driver = { + .name = "ums-cypress", + .probe = cypress_probe, + .disconnect = usb_stor_disconnect, + .suspend = usb_stor_suspend, + .resume = usb_stor_resume, + .reset_resume = usb_stor_reset_resume, + .pre_reset = usb_stor_pre_reset, + .post_reset = usb_stor_post_reset, + .id_table = cypress_usb_ids, + .soft_unbind = 1, + .no_dynamic_id = 1, +}; + +module_usb_driver(cypress_driver); diff --git a/kernel/drivers/usb/storage/datafab.c b/kernel/drivers/usb/storage/datafab.c new file mode 100644 index 000000000..7b17c2169 --- /dev/null +++ b/kernel/drivers/usb/storage/datafab.c @@ -0,0 +1,758 @@ +/* Driver for Datafab USB Compact Flash reader + * + * datafab driver v0.1: + * + * First release + * + * Current development and maintenance by: + * (c) 2000 Jimmie Mayfield (mayfield+datafab@sackheads.org) + * + * Many thanks to Robert Baruch for the SanDisk SmartMedia reader driver + * which I used as a template for this driver. + * + * Some bugfixes and scatter-gather code by Gregory P. Smith + * (greg-usb@electricrain.com) + * + * Fix for media change by Joerg Schneider (js@joergschneider.com) + * + * Other contributors: + * (c) 2002 Alan Stern <stern@rowland.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* + * This driver attempts to support USB CompactFlash reader/writer devices + * based on Datafab USB-to-ATA chips. It was specifically developed for the + * Datafab MDCFE-B USB CompactFlash reader but has since been found to work + * with a variety of Datafab-based devices from a number of manufacturers. + * I've received a report of this driver working with a Datafab-based + * SmartMedia device though please be aware that I'm personally unable to + * test SmartMedia support. + * + * This driver supports reading and writing. If you're truly paranoid, + * however, you can force the driver into a write-protected state by setting + * the WP enable bits in datafab_handle_mode_sense(). See the comments + * in that routine. + */ + +#include <linux/errno.h> +#include <linux/module.h> +#include <linux/slab.h> + +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> + +#include "usb.h" +#include "transport.h" +#include "protocol.h" +#include "debug.h" + +MODULE_DESCRIPTION("Driver for Datafab USB Compact Flash reader"); +MODULE_AUTHOR("Jimmie Mayfield <mayfield+datafab@sackheads.org>"); +MODULE_LICENSE("GPL"); + +struct datafab_info { + unsigned long sectors; /* total sector count */ + unsigned long ssize; /* sector size in bytes */ + signed char lun; /* used for dual-slot readers */ + + /* the following aren't used yet */ + unsigned char sense_key; + unsigned long sense_asc; /* additional sense code */ + unsigned long sense_ascq; /* additional sense code qualifier */ +}; + +static int datafab_determine_lun(struct us_data *us, + struct datafab_info *info); + + +/* + * The table of devices + */ +#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ + vendorName, productName, useProtocol, useTransport, \ + initFunction, flags) \ +{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ + .driver_info = (flags) } + +static struct usb_device_id datafab_usb_ids[] = { +# include "unusual_datafab.h" + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, datafab_usb_ids); + +#undef UNUSUAL_DEV + +/* + * The flags table + */ +#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \ + vendor_name, product_name, use_protocol, use_transport, \ + init_function, Flags) \ +{ \ + .vendorName = vendor_name, \ + .productName = product_name, \ + .useProtocol = use_protocol, \ + .useTransport = use_transport, \ + .initFunction = init_function, \ +} + +static struct us_unusual_dev datafab_unusual_dev_list[] = { +# include "unusual_datafab.h" + { } /* Terminating entry */ +}; + +#undef UNUSUAL_DEV + + +static inline int +datafab_bulk_read(struct us_data *us, unsigned char *data, unsigned int len) { + if (len == 0) + return USB_STOR_XFER_GOOD; + + usb_stor_dbg(us, "len = %d\n", len); + return usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, + data, len, NULL); +} + + +static inline int +datafab_bulk_write(struct us_data *us, unsigned char *data, unsigned int len) { + if (len == 0) + return USB_STOR_XFER_GOOD; + + usb_stor_dbg(us, "len = %d\n", len); + return usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, + data, len, NULL); +} + + +static int datafab_read_data(struct us_data *us, + struct datafab_info *info, + u32 sector, + u32 sectors) +{ + unsigned char *command = us->iobuf; + unsigned char *buffer; + unsigned char thistime; + unsigned int totallen, alloclen; + int len, result; + unsigned int sg_offset = 0; + struct scatterlist *sg = NULL; + + // we're working in LBA mode. according to the ATA spec, + // we can support up to 28-bit addressing. I don't know if Datafab + // supports beyond 24-bit addressing. It's kind of hard to test + // since it requires > 8GB CF card. + // + if (sectors > 0x0FFFFFFF) + return USB_STOR_TRANSPORT_ERROR; + + if (info->lun == -1) { + result = datafab_determine_lun(us, info); + if (result != USB_STOR_TRANSPORT_GOOD) + return result; + } + + totallen = sectors * info->ssize; + + // Since we don't read more than 64 KB at a time, we have to create + // a bounce buffer and move the data a piece at a time between the + // bounce buffer and the actual transfer buffer. + + alloclen = min(totallen, 65536u); + buffer = kmalloc(alloclen, GFP_NOIO); + if (buffer == NULL) + return USB_STOR_TRANSPORT_ERROR; + + do { + // loop, never allocate or transfer more than 64k at once + // (min(128k, 255*info->ssize) is the real limit) + + len = min(totallen, alloclen); + thistime = (len / info->ssize) & 0xff; + + command[0] = 0; + command[1] = thistime; + command[2] = sector & 0xFF; + command[3] = (sector >> 8) & 0xFF; + command[4] = (sector >> 16) & 0xFF; + + command[5] = 0xE0 + (info->lun << 4); + command[5] |= (sector >> 24) & 0x0F; + command[6] = 0x20; + command[7] = 0x01; + + // send the read command + result = datafab_bulk_write(us, command, 8); + if (result != USB_STOR_XFER_GOOD) + goto leave; + + // read the result + result = datafab_bulk_read(us, buffer, len); + if (result != USB_STOR_XFER_GOOD) + goto leave; + + // Store the data in the transfer buffer + usb_stor_access_xfer_buf(buffer, len, us->srb, + &sg, &sg_offset, TO_XFER_BUF); + + sector += thistime; + totallen -= len; + } while (totallen > 0); + + kfree(buffer); + return USB_STOR_TRANSPORT_GOOD; + + leave: + kfree(buffer); + return USB_STOR_TRANSPORT_ERROR; +} + + +static int datafab_write_data(struct us_data *us, + struct datafab_info *info, + u32 sector, + u32 sectors) +{ + unsigned char *command = us->iobuf; + unsigned char *reply = us->iobuf; + unsigned char *buffer; + unsigned char thistime; + unsigned int totallen, alloclen; + int len, result; + unsigned int sg_offset = 0; + struct scatterlist *sg = NULL; + + // we're working in LBA mode. according to the ATA spec, + // we can support up to 28-bit addressing. I don't know if Datafab + // supports beyond 24-bit addressing. It's kind of hard to test + // since it requires > 8GB CF card. + // + if (sectors > 0x0FFFFFFF) + return USB_STOR_TRANSPORT_ERROR; + + if (info->lun == -1) { + result = datafab_determine_lun(us, info); + if (result != USB_STOR_TRANSPORT_GOOD) + return result; + } + + totallen = sectors * info->ssize; + + // Since we don't write more than 64 KB at a time, we have to create + // a bounce buffer and move the data a piece at a time between the + // bounce buffer and the actual transfer buffer. + + alloclen = min(totallen, 65536u); + buffer = kmalloc(alloclen, GFP_NOIO); + if (buffer == NULL) + return USB_STOR_TRANSPORT_ERROR; + + do { + // loop, never allocate or transfer more than 64k at once + // (min(128k, 255*info->ssize) is the real limit) + + len = min(totallen, alloclen); + thistime = (len / info->ssize) & 0xff; + + // Get the data from the transfer buffer + usb_stor_access_xfer_buf(buffer, len, us->srb, + &sg, &sg_offset, FROM_XFER_BUF); + + command[0] = 0; + command[1] = thistime; + command[2] = sector & 0xFF; + command[3] = (sector >> 8) & 0xFF; + command[4] = (sector >> 16) & 0xFF; + + command[5] = 0xE0 + (info->lun << 4); + command[5] |= (sector >> 24) & 0x0F; + command[6] = 0x30; + command[7] = 0x02; + + // send the command + result = datafab_bulk_write(us, command, 8); + if (result != USB_STOR_XFER_GOOD) + goto leave; + + // send the data + result = datafab_bulk_write(us, buffer, len); + if (result != USB_STOR_XFER_GOOD) + goto leave; + + // read the result + result = datafab_bulk_read(us, reply, 2); + if (result != USB_STOR_XFER_GOOD) + goto leave; + + if (reply[0] != 0x50 && reply[1] != 0) { + usb_stor_dbg(us, "Gah! write return code: %02x %02x\n", + reply[0], reply[1]); + result = USB_STOR_TRANSPORT_ERROR; + goto leave; + } + + sector += thistime; + totallen -= len; + } while (totallen > 0); + + kfree(buffer); + return USB_STOR_TRANSPORT_GOOD; + + leave: + kfree(buffer); + return USB_STOR_TRANSPORT_ERROR; +} + + +static int datafab_determine_lun(struct us_data *us, + struct datafab_info *info) +{ + // Dual-slot readers can be thought of as dual-LUN devices. + // We need to determine which card slot is being used. + // We'll send an IDENTIFY DEVICE command and see which LUN responds... + // + // There might be a better way of doing this? + + static unsigned char scommand[8] = { 0, 1, 0, 0, 0, 0xa0, 0xec, 1 }; + unsigned char *command = us->iobuf; + unsigned char *buf; + int count = 0, rc; + + if (!info) + return USB_STOR_TRANSPORT_ERROR; + + memcpy(command, scommand, 8); + buf = kmalloc(512, GFP_NOIO); + if (!buf) + return USB_STOR_TRANSPORT_ERROR; + + usb_stor_dbg(us, "locating...\n"); + + // we'll try 3 times before giving up... + // + while (count++ < 3) { + command[5] = 0xa0; + + rc = datafab_bulk_write(us, command, 8); + if (rc != USB_STOR_XFER_GOOD) { + rc = USB_STOR_TRANSPORT_ERROR; + goto leave; + } + + rc = datafab_bulk_read(us, buf, 512); + if (rc == USB_STOR_XFER_GOOD) { + info->lun = 0; + rc = USB_STOR_TRANSPORT_GOOD; + goto leave; + } + + command[5] = 0xb0; + + rc = datafab_bulk_write(us, command, 8); + if (rc != USB_STOR_XFER_GOOD) { + rc = USB_STOR_TRANSPORT_ERROR; + goto leave; + } + + rc = datafab_bulk_read(us, buf, 512); + if (rc == USB_STOR_XFER_GOOD) { + info->lun = 1; + rc = USB_STOR_TRANSPORT_GOOD; + goto leave; + } + + msleep(20); + } + + rc = USB_STOR_TRANSPORT_ERROR; + + leave: + kfree(buf); + return rc; +} + +static int datafab_id_device(struct us_data *us, + struct datafab_info *info) +{ + // this is a variation of the ATA "IDENTIFY DEVICE" command...according + // to the ATA spec, 'Sector Count' isn't used but the Windows driver + // sets this bit so we do too... + // + static unsigned char scommand[8] = { 0, 1, 0, 0, 0, 0xa0, 0xec, 1 }; + unsigned char *command = us->iobuf; + unsigned char *reply; + int rc; + + if (!info) + return USB_STOR_TRANSPORT_ERROR; + + if (info->lun == -1) { + rc = datafab_determine_lun(us, info); + if (rc != USB_STOR_TRANSPORT_GOOD) + return rc; + } + + memcpy(command, scommand, 8); + reply = kmalloc(512, GFP_NOIO); + if (!reply) + return USB_STOR_TRANSPORT_ERROR; + + command[5] += (info->lun << 4); + + rc = datafab_bulk_write(us, command, 8); + if (rc != USB_STOR_XFER_GOOD) { + rc = USB_STOR_TRANSPORT_ERROR; + goto leave; + } + + // we'll go ahead and extract the media capacity while we're here... + // + rc = datafab_bulk_read(us, reply, 512); + if (rc == USB_STOR_XFER_GOOD) { + // capacity is at word offset 57-58 + // + info->sectors = ((u32)(reply[117]) << 24) | + ((u32)(reply[116]) << 16) | + ((u32)(reply[115]) << 8) | + ((u32)(reply[114]) ); + rc = USB_STOR_TRANSPORT_GOOD; + goto leave; + } + + rc = USB_STOR_TRANSPORT_ERROR; + + leave: + kfree(reply); + return rc; +} + + +static int datafab_handle_mode_sense(struct us_data *us, + struct scsi_cmnd * srb, + int sense_6) +{ + static unsigned char rw_err_page[12] = { + 0x1, 0xA, 0x21, 1, 0, 0, 0, 0, 1, 0, 0, 0 + }; + static unsigned char cache_page[12] = { + 0x8, 0xA, 0x1, 0, 0, 0, 0, 0, 0, 0, 0, 0 + }; + static unsigned char rbac_page[12] = { + 0x1B, 0xA, 0, 0x81, 0, 0, 0, 0, 0, 0, 0, 0 + }; + static unsigned char timer_page[8] = { + 0x1C, 0x6, 0, 0, 0, 0 + }; + unsigned char pc, page_code; + unsigned int i = 0; + struct datafab_info *info = (struct datafab_info *) (us->extra); + unsigned char *ptr = us->iobuf; + + // most of this stuff is just a hack to get things working. the + // datafab reader doesn't present a SCSI interface so we + // fudge the SCSI commands... + // + + pc = srb->cmnd[2] >> 6; + page_code = srb->cmnd[2] & 0x3F; + + switch (pc) { + case 0x0: + usb_stor_dbg(us, "Current values\n"); + break; + case 0x1: + usb_stor_dbg(us, "Changeable values\n"); + break; + case 0x2: + usb_stor_dbg(us, "Default values\n"); + break; + case 0x3: + usb_stor_dbg(us, "Saves values\n"); + break; + } + + memset(ptr, 0, 8); + if (sense_6) { + ptr[2] = 0x00; // WP enable: 0x80 + i = 4; + } else { + ptr[3] = 0x00; // WP enable: 0x80 + i = 8; + } + + switch (page_code) { + default: + // vendor-specific mode + info->sense_key = 0x05; + info->sense_asc = 0x24; + info->sense_ascq = 0x00; + return USB_STOR_TRANSPORT_FAILED; + + case 0x1: + memcpy(ptr + i, rw_err_page, sizeof(rw_err_page)); + i += sizeof(rw_err_page); + break; + + case 0x8: + memcpy(ptr + i, cache_page, sizeof(cache_page)); + i += sizeof(cache_page); + break; + + case 0x1B: + memcpy(ptr + i, rbac_page, sizeof(rbac_page)); + i += sizeof(rbac_page); + break; + + case 0x1C: + memcpy(ptr + i, timer_page, sizeof(timer_page)); + i += sizeof(timer_page); + break; + + case 0x3F: // retrieve all pages + memcpy(ptr + i, timer_page, sizeof(timer_page)); + i += sizeof(timer_page); + memcpy(ptr + i, rbac_page, sizeof(rbac_page)); + i += sizeof(rbac_page); + memcpy(ptr + i, cache_page, sizeof(cache_page)); + i += sizeof(cache_page); + memcpy(ptr + i, rw_err_page, sizeof(rw_err_page)); + i += sizeof(rw_err_page); + break; + } + + if (sense_6) + ptr[0] = i - 1; + else + ((__be16 *) ptr)[0] = cpu_to_be16(i - 2); + usb_stor_set_xfer_buf(ptr, i, srb); + + return USB_STOR_TRANSPORT_GOOD; +} + +static void datafab_info_destructor(void *extra) +{ + // this routine is a placeholder... + // currently, we don't allocate any extra memory so we're okay +} + + +// Transport for the Datafab MDCFE-B +// +static int datafab_transport(struct scsi_cmnd *srb, struct us_data *us) +{ + struct datafab_info *info; + int rc; + unsigned long block, blocks; + unsigned char *ptr = us->iobuf; + static unsigned char inquiry_reply[8] = { + 0x00, 0x80, 0x00, 0x01, 0x1F, 0x00, 0x00, 0x00 + }; + + if (!us->extra) { + us->extra = kzalloc(sizeof(struct datafab_info), GFP_NOIO); + if (!us->extra) + return USB_STOR_TRANSPORT_ERROR; + + us->extra_destructor = datafab_info_destructor; + ((struct datafab_info *)us->extra)->lun = -1; + } + + info = (struct datafab_info *) (us->extra); + + if (srb->cmnd[0] == INQUIRY) { + usb_stor_dbg(us, "INQUIRY - Returning bogus response\n"); + memcpy(ptr, inquiry_reply, sizeof(inquiry_reply)); + fill_inquiry_response(us, ptr, 36); + return USB_STOR_TRANSPORT_GOOD; + } + + if (srb->cmnd[0] == READ_CAPACITY) { + info->ssize = 0x200; // hard coded 512 byte sectors as per ATA spec + rc = datafab_id_device(us, info); + if (rc != USB_STOR_TRANSPORT_GOOD) + return rc; + + usb_stor_dbg(us, "READ_CAPACITY: %ld sectors, %ld bytes per sector\n", + info->sectors, info->ssize); + + // build the reply + // we need the last sector, not the number of sectors + ((__be32 *) ptr)[0] = cpu_to_be32(info->sectors - 1); + ((__be32 *) ptr)[1] = cpu_to_be32(info->ssize); + usb_stor_set_xfer_buf(ptr, 8, srb); + + return USB_STOR_TRANSPORT_GOOD; + } + + if (srb->cmnd[0] == MODE_SELECT_10) { + usb_stor_dbg(us, "Gah! MODE_SELECT_10\n"); + return USB_STOR_TRANSPORT_ERROR; + } + + // don't bother implementing READ_6 or WRITE_6. + // + if (srb->cmnd[0] == READ_10) { + block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) | + ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5])); + + blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8])); + + usb_stor_dbg(us, "READ_10: read block 0x%04lx count %ld\n", + block, blocks); + return datafab_read_data(us, info, block, blocks); + } + + if (srb->cmnd[0] == READ_12) { + // we'll probably never see a READ_12 but we'll do it anyway... + // + block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) | + ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5])); + + blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) | + ((u32)(srb->cmnd[8]) << 8) | ((u32)(srb->cmnd[9])); + + usb_stor_dbg(us, "READ_12: read block 0x%04lx count %ld\n", + block, blocks); + return datafab_read_data(us, info, block, blocks); + } + + if (srb->cmnd[0] == WRITE_10) { + block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) | + ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5])); + + blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8])); + + usb_stor_dbg(us, "WRITE_10: write block 0x%04lx count %ld\n", + block, blocks); + return datafab_write_data(us, info, block, blocks); + } + + if (srb->cmnd[0] == WRITE_12) { + // we'll probably never see a WRITE_12 but we'll do it anyway... + // + block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) | + ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5])); + + blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) | + ((u32)(srb->cmnd[8]) << 8) | ((u32)(srb->cmnd[9])); + + usb_stor_dbg(us, "WRITE_12: write block 0x%04lx count %ld\n", + block, blocks); + return datafab_write_data(us, info, block, blocks); + } + + if (srb->cmnd[0] == TEST_UNIT_READY) { + usb_stor_dbg(us, "TEST_UNIT_READY\n"); + return datafab_id_device(us, info); + } + + if (srb->cmnd[0] == REQUEST_SENSE) { + usb_stor_dbg(us, "REQUEST_SENSE - Returning faked response\n"); + + // this response is pretty bogus right now. eventually if necessary + // we can set the correct sense data. so far though it hasn't been + // necessary + // + memset(ptr, 0, 18); + ptr[0] = 0xF0; + ptr[2] = info->sense_key; + ptr[7] = 11; + ptr[12] = info->sense_asc; + ptr[13] = info->sense_ascq; + usb_stor_set_xfer_buf(ptr, 18, srb); + + return USB_STOR_TRANSPORT_GOOD; + } + + if (srb->cmnd[0] == MODE_SENSE) { + usb_stor_dbg(us, "MODE_SENSE_6 detected\n"); + return datafab_handle_mode_sense(us, srb, 1); + } + + if (srb->cmnd[0] == MODE_SENSE_10) { + usb_stor_dbg(us, "MODE_SENSE_10 detected\n"); + return datafab_handle_mode_sense(us, srb, 0); + } + + if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) { + // sure. whatever. not like we can stop the user from + // popping the media out of the device (no locking doors, etc) + // + return USB_STOR_TRANSPORT_GOOD; + } + + if (srb->cmnd[0] == START_STOP) { + /* this is used by sd.c'check_scsidisk_media_change to detect + media change */ + usb_stor_dbg(us, "START_STOP\n"); + /* the first datafab_id_device after a media change returns + an error (determined experimentally) */ + rc = datafab_id_device(us, info); + if (rc == USB_STOR_TRANSPORT_GOOD) { + info->sense_key = NO_SENSE; + srb->result = SUCCESS; + } else { + info->sense_key = UNIT_ATTENTION; + srb->result = SAM_STAT_CHECK_CONDITION; + } + return rc; + } + + usb_stor_dbg(us, "Gah! Unknown command: %d (0x%x)\n", + srb->cmnd[0], srb->cmnd[0]); + info->sense_key = 0x05; + info->sense_asc = 0x20; + info->sense_ascq = 0x00; + return USB_STOR_TRANSPORT_FAILED; +} + +static int datafab_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct us_data *us; + int result; + + result = usb_stor_probe1(&us, intf, id, + (id - datafab_usb_ids) + datafab_unusual_dev_list); + if (result) + return result; + + us->transport_name = "Datafab Bulk-Only"; + us->transport = datafab_transport; + us->transport_reset = usb_stor_Bulk_reset; + us->max_lun = 1; + + result = usb_stor_probe2(us); + return result; +} + +static struct usb_driver datafab_driver = { + .name = "ums-datafab", + .probe = datafab_probe, + .disconnect = usb_stor_disconnect, + .suspend = usb_stor_suspend, + .resume = usb_stor_resume, + .reset_resume = usb_stor_reset_resume, + .pre_reset = usb_stor_pre_reset, + .post_reset = usb_stor_post_reset, + .id_table = datafab_usb_ids, + .soft_unbind = 1, + .no_dynamic_id = 1, +}; + +module_usb_driver(datafab_driver); diff --git a/kernel/drivers/usb/storage/debug.c b/kernel/drivers/usb/storage/debug.c new file mode 100644 index 000000000..57bf3ad41 --- /dev/null +++ b/kernel/drivers/usb/storage/debug.c @@ -0,0 +1,194 @@ +/* Driver for USB Mass Storage compliant devices + * Debugging Functions Source Code File + * + * Current development and maintenance by: + * (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net) + * + * Developed with the assistance of: + * (c) 2002 Alan Stern <stern@rowland.org> + * + * Initial work by: + * (c) 1999 Michael Gee (michael@linuxspecific.com) + * + * This driver is based on the 'USB Mass Storage Class' document. This + * describes in detail the protocol used to communicate with such + * devices. Clearly, the designers had SCSI and ATAPI commands in + * mind when they created this document. The commands are all very + * similar to commands in the SCSI-II and ATAPI specifications. + * + * It is important to note that in a number of cases this class + * exhibits class-specific exemptions from the USB specification. + * Notably the usage of NAK, STALL and ACK differs from the norm, in + * that they are used to communicate wait, failed and OK on commands. + * + * Also, for certain devices, the interrupt endpoint is used to convey + * status of a command. + * + * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more + * information about this driver. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/device.h> +#include <linux/cdrom.h> +#include <linux/export.h> +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_dbg.h> + +#include "usb.h" +#include "debug.h" +#include "scsi.h" + + +void usb_stor_show_command(const struct us_data *us, struct scsi_cmnd *srb) +{ + char *what = NULL; + int i; + + switch (srb->cmnd[0]) { + case TEST_UNIT_READY: what = "TEST_UNIT_READY"; break; + case REZERO_UNIT: what = "REZERO_UNIT"; break; + case REQUEST_SENSE: what = "REQUEST_SENSE"; break; + case FORMAT_UNIT: what = "FORMAT_UNIT"; break; + case READ_BLOCK_LIMITS: what = "READ_BLOCK_LIMITS"; break; + case REASSIGN_BLOCKS: what = "REASSIGN_BLOCKS"; break; + case READ_6: what = "READ_6"; break; + case WRITE_6: what = "WRITE_6"; break; + case SEEK_6: what = "SEEK_6"; break; + case READ_REVERSE: what = "READ_REVERSE"; break; + case WRITE_FILEMARKS: what = "WRITE_FILEMARKS"; break; + case SPACE: what = "SPACE"; break; + case INQUIRY: what = "INQUIRY"; break; + case RECOVER_BUFFERED_DATA: what = "RECOVER_BUFFERED_DATA"; break; + case MODE_SELECT: what = "MODE_SELECT"; break; + case RESERVE: what = "RESERVE"; break; + case RELEASE: what = "RELEASE"; break; + case COPY: what = "COPY"; break; + case ERASE: what = "ERASE"; break; + case MODE_SENSE: what = "MODE_SENSE"; break; + case START_STOP: what = "START_STOP"; break; + case RECEIVE_DIAGNOSTIC: what = "RECEIVE_DIAGNOSTIC"; break; + case SEND_DIAGNOSTIC: what = "SEND_DIAGNOSTIC"; break; + case ALLOW_MEDIUM_REMOVAL: what = "ALLOW_MEDIUM_REMOVAL"; break; + case SET_WINDOW: what = "SET_WINDOW"; break; + case READ_CAPACITY: what = "READ_CAPACITY"; break; + case READ_10: what = "READ_10"; break; + case WRITE_10: what = "WRITE_10"; break; + case SEEK_10: what = "SEEK_10"; break; + case WRITE_VERIFY: what = "WRITE_VERIFY"; break; + case VERIFY: what = "VERIFY"; break; + case SEARCH_HIGH: what = "SEARCH_HIGH"; break; + case SEARCH_EQUAL: what = "SEARCH_EQUAL"; break; + case SEARCH_LOW: what = "SEARCH_LOW"; break; + case SET_LIMITS: what = "SET_LIMITS"; break; + case READ_POSITION: what = "READ_POSITION"; break; + case SYNCHRONIZE_CACHE: what = "SYNCHRONIZE_CACHE"; break; + case LOCK_UNLOCK_CACHE: what = "LOCK_UNLOCK_CACHE"; break; + case READ_DEFECT_DATA: what = "READ_DEFECT_DATA"; break; + case MEDIUM_SCAN: what = "MEDIUM_SCAN"; break; + case COMPARE: what = "COMPARE"; break; + case COPY_VERIFY: what = "COPY_VERIFY"; break; + case WRITE_BUFFER: what = "WRITE_BUFFER"; break; + case READ_BUFFER: what = "READ_BUFFER"; break; + case UPDATE_BLOCK: what = "UPDATE_BLOCK"; break; + case READ_LONG: what = "READ_LONG"; break; + case WRITE_LONG: what = "WRITE_LONG"; break; + case CHANGE_DEFINITION: what = "CHANGE_DEFINITION"; break; + case WRITE_SAME: what = "WRITE_SAME"; break; + case GPCMD_READ_SUBCHANNEL: what = "READ SUBCHANNEL"; break; + case READ_TOC: what = "READ_TOC"; break; + case GPCMD_READ_HEADER: what = "READ HEADER"; break; + case GPCMD_PLAY_AUDIO_10: what = "PLAY AUDIO (10)"; break; + case GPCMD_PLAY_AUDIO_MSF: what = "PLAY AUDIO MSF"; break; + case GPCMD_GET_EVENT_STATUS_NOTIFICATION: + what = "GET EVENT/STATUS NOTIFICATION"; break; + case GPCMD_PAUSE_RESUME: what = "PAUSE/RESUME"; break; + case LOG_SELECT: what = "LOG_SELECT"; break; + case LOG_SENSE: what = "LOG_SENSE"; break; + case GPCMD_STOP_PLAY_SCAN: what = "STOP PLAY/SCAN"; break; + case GPCMD_READ_DISC_INFO: what = "READ DISC INFORMATION"; break; + case GPCMD_READ_TRACK_RZONE_INFO: + what = "READ TRACK INFORMATION"; break; + case GPCMD_RESERVE_RZONE_TRACK: what = "RESERVE TRACK"; break; + case GPCMD_SEND_OPC: what = "SEND OPC"; break; + case MODE_SELECT_10: what = "MODE_SELECT_10"; break; + case GPCMD_REPAIR_RZONE_TRACK: what = "REPAIR TRACK"; break; + case 0x59: what = "READ MASTER CUE"; break; + case MODE_SENSE_10: what = "MODE_SENSE_10"; break; + case GPCMD_CLOSE_TRACK: what = "CLOSE TRACK/SESSION"; break; + case 0x5C: what = "READ BUFFER CAPACITY"; break; + case 0x5D: what = "SEND CUE SHEET"; break; + case GPCMD_BLANK: what = "BLANK"; break; + case REPORT_LUNS: what = "REPORT LUNS"; break; + case MOVE_MEDIUM: what = "MOVE_MEDIUM or PLAY AUDIO (12)"; break; + case READ_12: what = "READ_12"; break; + case WRITE_12: what = "WRITE_12"; break; + case WRITE_VERIFY_12: what = "WRITE_VERIFY_12"; break; + case SEARCH_HIGH_12: what = "SEARCH_HIGH_12"; break; + case SEARCH_EQUAL_12: what = "SEARCH_EQUAL_12"; break; + case SEARCH_LOW_12: what = "SEARCH_LOW_12"; break; + case SEND_VOLUME_TAG: what = "SEND_VOLUME_TAG"; break; + case READ_ELEMENT_STATUS: what = "READ_ELEMENT_STATUS"; break; + case GPCMD_READ_CD_MSF: what = "READ CD MSF"; break; + case GPCMD_SCAN: what = "SCAN"; break; + case GPCMD_SET_SPEED: what = "SET CD SPEED"; break; + case GPCMD_MECHANISM_STATUS: what = "MECHANISM STATUS"; break; + case GPCMD_READ_CD: what = "READ CD"; break; + case 0xE1: what = "WRITE CONTINUE"; break; + case WRITE_LONG_2: what = "WRITE_LONG_2"; break; + default: what = "(unknown command)"; break; + } + usb_stor_dbg(us, "Command %s (%d bytes)\n", what, srb->cmd_len); + usb_stor_dbg(us, "bytes: "); + for (i = 0; i < srb->cmd_len && i < 16; i++) + US_DEBUGPX(" %02x", srb->cmnd[i]); + US_DEBUGPX("\n"); +} + +void usb_stor_show_sense(const struct us_data *us, + unsigned char key, + unsigned char asc, + unsigned char ascq) +{ + const char *what, *keystr, *fmt; + + keystr = scsi_sense_key_string(key); + what = scsi_extd_sense_format(asc, ascq, &fmt); + + if (keystr == NULL) + keystr = "(Unknown Key)"; + if (what == NULL) + what = "(unknown ASC/ASCQ)"; + + usb_stor_dbg(us, "%s: ", keystr); + if (fmt) + US_DEBUGPX("%s (%s%x)\n", what, fmt, ascq); + else + US_DEBUGPX("%s\n", what); +} + +void usb_stor_dbg(const struct us_data *us, const char *fmt, ...) +{ + va_list args; + + va_start(args, fmt); + + dev_vprintk_emit(LOGLEVEL_DEBUG, &us->pusb_dev->dev, fmt, args); + + va_end(args); +} +EXPORT_SYMBOL_GPL(usb_stor_dbg); diff --git a/kernel/drivers/usb/storage/debug.h b/kernel/drivers/usb/storage/debug.h new file mode 100644 index 000000000..f52520306 --- /dev/null +++ b/kernel/drivers/usb/storage/debug.h @@ -0,0 +1,71 @@ +/* Driver for USB Mass Storage compliant devices + * Debugging Functions Header File + * + * Current development and maintenance by: + * (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net) + * + * Initial work by: + * (c) 1999 Michael Gee (michael@linuxspecific.com) + * + * This driver is based on the 'USB Mass Storage Class' document. This + * describes in detail the protocol used to communicate with such + * devices. Clearly, the designers had SCSI and ATAPI commands in + * mind when they created this document. The commands are all very + * similar to commands in the SCSI-II and ATAPI specifications. + * + * It is important to note that in a number of cases this class + * exhibits class-specific exemptions from the USB specification. + * Notably the usage of NAK, STALL and ACK differs from the norm, in + * that they are used to communicate wait, failed and OK on commands. + * + * Also, for certain devices, the interrupt endpoint is used to convey + * status of a command. + * + * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more + * information about this driver. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _DEBUG_H_ +#define _DEBUG_H_ + +#include <linux/kernel.h> + +#define USB_STORAGE "usb-storage: " + +#ifdef CONFIG_USB_STORAGE_DEBUG +void usb_stor_show_command(const struct us_data *us, struct scsi_cmnd *srb); +void usb_stor_show_sense(const struct us_data *us, unsigned char key, + unsigned char asc, unsigned char ascq); +__printf(2, 3) void usb_stor_dbg(const struct us_data *us, + const char *fmt, ...); + +#define US_DEBUGPX(fmt, ...) printk(fmt, ##__VA_ARGS__) +#define US_DEBUG(x) x +#else +__printf(2, 3) +static inline void _usb_stor_dbg(const struct us_data *us, + const char *fmt, ...) +{ +} +#define usb_stor_dbg(us, fmt, ...) \ + do { if (0) _usb_stor_dbg(us, fmt, ##__VA_ARGS__); } while (0) +#define US_DEBUGPX(fmt, ...) \ + do { if (0) printk(fmt, ##__VA_ARGS__); } while (0) +#define US_DEBUG(x) +#endif + +#endif diff --git a/kernel/drivers/usb/storage/ene_ub6250.c b/kernel/drivers/usb/storage/ene_ub6250.c new file mode 100644 index 000000000..56f782bef --- /dev/null +++ b/kernel/drivers/usb/storage/ene_ub6250.c @@ -0,0 +1,2420 @@ +/* + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include <linux/jiffies.h> +#include <linux/errno.h> +#include <linux/module.h> +#include <linux/slab.h> + +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> + +#include <linux/firmware.h> + +#include "usb.h" +#include "transport.h" +#include "protocol.h" +#include "debug.h" + +#define SD_INIT1_FIRMWARE "ene-ub6250/sd_init1.bin" +#define SD_INIT2_FIRMWARE "ene-ub6250/sd_init2.bin" +#define SD_RW_FIRMWARE "ene-ub6250/sd_rdwr.bin" +#define MS_INIT_FIRMWARE "ene-ub6250/ms_init.bin" +#define MSP_RW_FIRMWARE "ene-ub6250/msp_rdwr.bin" +#define MS_RW_FIRMWARE "ene-ub6250/ms_rdwr.bin" + +MODULE_DESCRIPTION("Driver for ENE UB6250 reader"); +MODULE_LICENSE("GPL"); +MODULE_FIRMWARE(SD_INIT1_FIRMWARE); +MODULE_FIRMWARE(SD_INIT2_FIRMWARE); +MODULE_FIRMWARE(SD_RW_FIRMWARE); +MODULE_FIRMWARE(MS_INIT_FIRMWARE); +MODULE_FIRMWARE(MSP_RW_FIRMWARE); +MODULE_FIRMWARE(MS_RW_FIRMWARE); + +/* + * The table of devices + */ +#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ + vendorName, productName, useProtocol, useTransport, \ + initFunction, flags) \ +{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ + .driver_info = (flags)} + +static struct usb_device_id ene_ub6250_usb_ids[] = { +# include "unusual_ene_ub6250.h" + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, ene_ub6250_usb_ids); + +#undef UNUSUAL_DEV + +/* + * The flags table + */ +#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \ + vendor_name, product_name, use_protocol, use_transport, \ + init_function, Flags) \ +{ \ + .vendorName = vendor_name, \ + .productName = product_name, \ + .useProtocol = use_protocol, \ + .useTransport = use_transport, \ + .initFunction = init_function, \ +} + +static struct us_unusual_dev ene_ub6250_unusual_dev_list[] = { +# include "unusual_ene_ub6250.h" + { } /* Terminating entry */ +}; + +#undef UNUSUAL_DEV + + + +/* ENE bin code len */ +#define ENE_BIN_CODE_LEN 0x800 +/* EnE HW Register */ +#define REG_CARD_STATUS 0xFF83 +#define REG_HW_TRAP1 0xFF89 + +/* SRB Status */ +#define SS_SUCCESS 0x00 /* No Sense */ +#define SS_NOT_READY 0x02 +#define SS_MEDIUM_ERR 0x03 +#define SS_HW_ERR 0x04 +#define SS_ILLEGAL_REQUEST 0x05 +#define SS_UNIT_ATTENTION 0x06 + +/* ENE Load FW Pattern */ +#define SD_INIT1_PATTERN 1 +#define SD_INIT2_PATTERN 2 +#define SD_RW_PATTERN 3 +#define MS_INIT_PATTERN 4 +#define MSP_RW_PATTERN 5 +#define MS_RW_PATTERN 6 +#define SM_INIT_PATTERN 7 +#define SM_RW_PATTERN 8 + +#define FDIR_WRITE 0 +#define FDIR_READ 1 + +/* For MS Card */ + +/* Status Register 1 */ +#define MS_REG_ST1_MB 0x80 /* media busy */ +#define MS_REG_ST1_FB1 0x40 /* flush busy 1 */ +#define MS_REG_ST1_DTER 0x20 /* error on data(corrected) */ +#define MS_REG_ST1_UCDT 0x10 /* unable to correct data */ +#define MS_REG_ST1_EXER 0x08 /* error on extra(corrected) */ +#define MS_REG_ST1_UCEX 0x04 /* unable to correct extra */ +#define MS_REG_ST1_FGER 0x02 /* error on overwrite flag(corrected) */ +#define MS_REG_ST1_UCFG 0x01 /* unable to correct overwrite flag */ +#define MS_REG_ST1_DEFAULT (MS_REG_ST1_MB | MS_REG_ST1_FB1 | MS_REG_ST1_DTER | MS_REG_ST1_UCDT | MS_REG_ST1_EXER | MS_REG_ST1_UCEX | MS_REG_ST1_FGER | MS_REG_ST1_UCFG) + +/* Overwrite Area */ +#define MS_REG_OVR_BKST 0x80 /* block status */ +#define MS_REG_OVR_BKST_OK MS_REG_OVR_BKST /* OK */ +#define MS_REG_OVR_BKST_NG 0x00 /* NG */ +#define MS_REG_OVR_PGST0 0x40 /* page status */ +#define MS_REG_OVR_PGST1 0x20 +#define MS_REG_OVR_PGST_MASK (MS_REG_OVR_PGST0 | MS_REG_OVR_PGST1) +#define MS_REG_OVR_PGST_OK (MS_REG_OVR_PGST0 | MS_REG_OVR_PGST1) /* OK */ +#define MS_REG_OVR_PGST_NG MS_REG_OVR_PGST1 /* NG */ +#define MS_REG_OVR_PGST_DATA_ERROR 0x00 /* data error */ +#define MS_REG_OVR_UDST 0x10 /* update status */ +#define MS_REG_OVR_UDST_UPDATING 0x00 /* updating */ +#define MS_REG_OVR_UDST_NO_UPDATE MS_REG_OVR_UDST +#define MS_REG_OVR_RESERVED 0x08 +#define MS_REG_OVR_DEFAULT (MS_REG_OVR_BKST_OK | MS_REG_OVR_PGST_OK | MS_REG_OVR_UDST_NO_UPDATE | MS_REG_OVR_RESERVED) + +/* Management Flag */ +#define MS_REG_MNG_SCMS0 0x20 /* serial copy management system */ +#define MS_REG_MNG_SCMS1 0x10 +#define MS_REG_MNG_SCMS_MASK (MS_REG_MNG_SCMS0 | MS_REG_MNG_SCMS1) +#define MS_REG_MNG_SCMS_COPY_OK (MS_REG_MNG_SCMS0 | MS_REG_MNG_SCMS1) +#define MS_REG_MNG_SCMS_ONE_COPY MS_REG_MNG_SCMS1 +#define MS_REG_MNG_SCMS_NO_COPY 0x00 +#define MS_REG_MNG_ATFLG 0x08 /* address transfer table flag */ +#define MS_REG_MNG_ATFLG_OTHER MS_REG_MNG_ATFLG /* other */ +#define MS_REG_MNG_ATFLG_ATTBL 0x00 /* address transfer table */ +#define MS_REG_MNG_SYSFLG 0x04 /* system flag */ +#define MS_REG_MNG_SYSFLG_USER MS_REG_MNG_SYSFLG /* user block */ +#define MS_REG_MNG_SYSFLG_BOOT 0x00 /* system block */ +#define MS_REG_MNG_RESERVED 0xc3 +#define MS_REG_MNG_DEFAULT (MS_REG_MNG_SCMS_COPY_OK | MS_REG_MNG_ATFLG_OTHER | MS_REG_MNG_SYSFLG_USER | MS_REG_MNG_RESERVED) + + +#define MS_MAX_PAGES_PER_BLOCK 32 +#define MS_MAX_INITIAL_ERROR_BLOCKS 10 +#define MS_LIB_BITS_PER_BYTE 8 + +#define MS_SYSINF_FORMAT_FAT 1 +#define MS_SYSINF_USAGE_GENERAL 0 + +#define MS_SYSINF_MSCLASS_TYPE_1 1 +#define MS_SYSINF_PAGE_SIZE MS_BYTES_PER_PAGE /* fixed */ + +#define MS_SYSINF_CARDTYPE_RDONLY 1 +#define MS_SYSINF_CARDTYPE_RDWR 2 +#define MS_SYSINF_CARDTYPE_HYBRID 3 +#define MS_SYSINF_SECURITY 0x01 +#define MS_SYSINF_SECURITY_NO_SUPPORT MS_SYSINF_SECURITY +#define MS_SYSINF_SECURITY_SUPPORT 0 + +#define MS_SYSINF_RESERVED1 1 +#define MS_SYSINF_RESERVED2 1 + +#define MS_SYSENT_TYPE_INVALID_BLOCK 0x01 +#define MS_SYSENT_TYPE_CIS_IDI 0x0a /* CIS/IDI */ + +#define SIZE_OF_KIRO 1024 +#define BYTE_MASK 0xff + +/* ms error code */ +#define MS_STATUS_WRITE_PROTECT 0x0106 +#define MS_STATUS_SUCCESS 0x0000 +#define MS_ERROR_FLASH_READ 0x8003 +#define MS_ERROR_FLASH_ERASE 0x8005 +#define MS_LB_ERROR 0xfff0 +#define MS_LB_BOOT_BLOCK 0xfff1 +#define MS_LB_INITIAL_ERROR 0xfff2 +#define MS_STATUS_SUCCESS_WITH_ECC 0xfff3 +#define MS_LB_ACQUIRED_ERROR 0xfff4 +#define MS_LB_NOT_USED_ERASED 0xfff5 +#define MS_NOCARD_ERROR 0xfff8 +#define MS_NO_MEMORY_ERROR 0xfff9 +#define MS_STATUS_INT_ERROR 0xfffa +#define MS_STATUS_ERROR 0xfffe +#define MS_LB_NOT_USED 0xffff + +#define MS_REG_MNG_SYSFLG 0x04 /* system flag */ +#define MS_REG_MNG_SYSFLG_USER MS_REG_MNG_SYSFLG /* user block */ + +#define MS_BOOT_BLOCK_ID 0x0001 +#define MS_BOOT_BLOCK_FORMAT_VERSION 0x0100 +#define MS_BOOT_BLOCK_DATA_ENTRIES 2 + +#define MS_NUMBER_OF_SYSTEM_ENTRY 4 +#define MS_NUMBER_OF_BOOT_BLOCK 2 +#define MS_BYTES_PER_PAGE 512 +#define MS_LOGICAL_BLOCKS_PER_SEGMENT 496 +#define MS_LOGICAL_BLOCKS_IN_1ST_SEGMENT 494 + +#define MS_PHYSICAL_BLOCKS_PER_SEGMENT 0x200 /* 512 */ +#define MS_PHYSICAL_BLOCKS_PER_SEGMENT_MASK 0x1ff + +/* overwrite area */ +#define MS_REG_OVR_BKST 0x80 /* block status */ +#define MS_REG_OVR_BKST_OK MS_REG_OVR_BKST /* OK */ +#define MS_REG_OVR_BKST_NG 0x00 /* NG */ + +/* Status Register 1 */ +#define MS_REG_ST1_DTER 0x20 /* error on data(corrected) */ +#define MS_REG_ST1_EXER 0x08 /* error on extra(corrected) */ +#define MS_REG_ST1_FGER 0x02 /* error on overwrite flag(corrected) */ + +/* MemoryStick Register */ +/* Status Register 0 */ +#define MS_REG_ST0_WP 0x01 /* write protected */ +#define MS_REG_ST0_WP_ON MS_REG_ST0_WP + +#define MS_LIB_CTRL_RDONLY 0 +#define MS_LIB_CTRL_WRPROTECT 1 + +/*dphy->log table */ +#define ms_libconv_to_logical(pdx, PhyBlock) (((PhyBlock) >= (pdx)->MS_Lib.NumberOfPhyBlock) ? MS_STATUS_ERROR : (pdx)->MS_Lib.Phy2LogMap[PhyBlock]) +#define ms_libconv_to_physical(pdx, LogBlock) (((LogBlock) >= (pdx)->MS_Lib.NumberOfLogBlock) ? MS_STATUS_ERROR : (pdx)->MS_Lib.Log2PhyMap[LogBlock]) + +#define ms_lib_ctrl_set(pdx, Flag) ((pdx)->MS_Lib.flags |= (1 << (Flag))) +#define ms_lib_ctrl_reset(pdx, Flag) ((pdx)->MS_Lib.flags &= ~(1 << (Flag))) +#define ms_lib_ctrl_check(pdx, Flag) ((pdx)->MS_Lib.flags & (1 << (Flag))) + +#define ms_lib_iswritable(pdx) ((ms_lib_ctrl_check((pdx), MS_LIB_CTRL_RDONLY) == 0) && (ms_lib_ctrl_check(pdx, MS_LIB_CTRL_WRPROTECT) == 0)) +#define ms_lib_clear_pagemap(pdx) memset((pdx)->MS_Lib.pagemap, 0, sizeof((pdx)->MS_Lib.pagemap)) +#define memstick_logaddr(logadr1, logadr0) ((((u16)(logadr1)) << 8) | (logadr0)) + + +struct SD_STATUS { + u8 Insert:1; + u8 Ready:1; + u8 MediaChange:1; + u8 IsMMC:1; + u8 HiCapacity:1; + u8 HiSpeed:1; + u8 WtP:1; + u8 Reserved:1; +}; + +struct MS_STATUS { + u8 Insert:1; + u8 Ready:1; + u8 MediaChange:1; + u8 IsMSPro:1; + u8 IsMSPHG:1; + u8 Reserved1:1; + u8 WtP:1; + u8 Reserved2:1; +}; + +struct SM_STATUS { + u8 Insert:1; + u8 Ready:1; + u8 MediaChange:1; + u8 Reserved:3; + u8 WtP:1; + u8 IsMS:1; +}; + +struct ms_bootblock_cis { + u8 bCistplDEVICE[6]; /* 0 */ + u8 bCistplDEVICE0C[6]; /* 6 */ + u8 bCistplJEDECC[4]; /* 12 */ + u8 bCistplMANFID[6]; /* 16 */ + u8 bCistplVER1[32]; /* 22 */ + u8 bCistplFUNCID[4]; /* 54 */ + u8 bCistplFUNCE0[4]; /* 58 */ + u8 bCistplFUNCE1[5]; /* 62 */ + u8 bCistplCONF[7]; /* 67 */ + u8 bCistplCFTBLENT0[10];/* 74 */ + u8 bCistplCFTBLENT1[8]; /* 84 */ + u8 bCistplCFTBLENT2[12];/* 92 */ + u8 bCistplCFTBLENT3[8]; /* 104 */ + u8 bCistplCFTBLENT4[17];/* 112 */ + u8 bCistplCFTBLENT5[8]; /* 129 */ + u8 bCistplCFTBLENT6[17];/* 137 */ + u8 bCistplCFTBLENT7[8]; /* 154 */ + u8 bCistplNOLINK[3]; /* 162 */ +} ; + +struct ms_bootblock_idi { +#define MS_IDI_GENERAL_CONF 0x848A + u16 wIDIgeneralConfiguration; /* 0 */ + u16 wIDInumberOfCylinder; /* 1 */ + u16 wIDIreserved0; /* 2 */ + u16 wIDInumberOfHead; /* 3 */ + u16 wIDIbytesPerTrack; /* 4 */ + u16 wIDIbytesPerSector; /* 5 */ + u16 wIDIsectorsPerTrack; /* 6 */ + u16 wIDItotalSectors[2]; /* 7-8 high,low */ + u16 wIDIreserved1[11]; /* 9-19 */ + u16 wIDIbufferType; /* 20 */ + u16 wIDIbufferSize; /* 21 */ + u16 wIDIlongCmdECC; /* 22 */ + u16 wIDIfirmVersion[4]; /* 23-26 */ + u16 wIDImodelName[20]; /* 27-46 */ + u16 wIDIreserved2; /* 47 */ + u16 wIDIlongWordSupported; /* 48 */ + u16 wIDIdmaSupported; /* 49 */ + u16 wIDIreserved3; /* 50 */ + u16 wIDIpioTiming; /* 51 */ + u16 wIDIdmaTiming; /* 52 */ + u16 wIDItransferParameter; /* 53 */ + u16 wIDIformattedCylinder; /* 54 */ + u16 wIDIformattedHead; /* 55 */ + u16 wIDIformattedSectorsPerTrack;/* 56 */ + u16 wIDIformattedTotalSectors[2];/* 57-58 */ + u16 wIDImultiSector; /* 59 */ + u16 wIDIlbaSectors[2]; /* 60-61 */ + u16 wIDIsingleWordDMA; /* 62 */ + u16 wIDImultiWordDMA; /* 63 */ + u16 wIDIreserved4[192]; /* 64-255 */ +}; + +struct ms_bootblock_sysent_rec { + u32 dwStart; + u32 dwSize; + u8 bType; + u8 bReserved[3]; +}; + +struct ms_bootblock_sysent { + struct ms_bootblock_sysent_rec entry[MS_NUMBER_OF_SYSTEM_ENTRY]; +}; + +struct ms_bootblock_sysinf { + u8 bMsClass; /* must be 1 */ + u8 bCardType; /* see below */ + u16 wBlockSize; /* n KB */ + u16 wBlockNumber; /* number of physical block */ + u16 wTotalBlockNumber; /* number of logical block */ + u16 wPageSize; /* must be 0x200 */ + u8 bExtraSize; /* 0x10 */ + u8 bSecuritySupport; + u8 bAssemblyDate[8]; + u8 bFactoryArea[4]; + u8 bAssemblyMakerCode; + u8 bAssemblyMachineCode[3]; + u16 wMemoryMakerCode; + u16 wMemoryDeviceCode; + u16 wMemorySize; + u8 bReserved1; + u8 bReserved2; + u8 bVCC; + u8 bVPP; + u16 wControllerChipNumber; + u16 wControllerFunction; /* New MS */ + u8 bReserved3[9]; /* New MS */ + u8 bParallelSupport; /* New MS */ + u16 wFormatValue; /* New MS */ + u8 bFormatType; + u8 bUsage; + u8 bDeviceType; + u8 bReserved4[22]; + u8 bFUValue3; + u8 bFUValue4; + u8 bReserved5[15]; +}; + +struct ms_bootblock_header { + u16 wBlockID; + u16 wFormatVersion; + u8 bReserved1[184]; + u8 bNumberOfDataEntry; + u8 bReserved2[179]; +}; + +struct ms_bootblock_page0 { + struct ms_bootblock_header header; + struct ms_bootblock_sysent sysent; + struct ms_bootblock_sysinf sysinf; +}; + +struct ms_bootblock_cis_idi { + union { + struct ms_bootblock_cis cis; + u8 dmy[256]; + } cis; + + union { + struct ms_bootblock_idi idi; + u8 dmy[256]; + } idi; + +}; + +/* ENE MS Lib struct */ +struct ms_lib_type_extdat { + u8 reserved; + u8 intr; + u8 status0; + u8 status1; + u8 ovrflg; + u8 mngflg; + u16 logadr; +}; + +struct ms_lib_ctrl { + u32 flags; + u32 BytesPerSector; + u32 NumberOfCylinder; + u32 SectorsPerCylinder; + u16 cardType; /* R/W, RO, Hybrid */ + u16 blockSize; + u16 PagesPerBlock; + u16 NumberOfPhyBlock; + u16 NumberOfLogBlock; + u16 NumberOfSegment; + u16 *Phy2LogMap; /* phy2log table */ + u16 *Log2PhyMap; /* log2phy table */ + u16 wrtblk; + unsigned char *pagemap[(MS_MAX_PAGES_PER_BLOCK + (MS_LIB_BITS_PER_BYTE-1)) / MS_LIB_BITS_PER_BYTE]; + unsigned char *blkpag; + struct ms_lib_type_extdat *blkext; + unsigned char copybuf[512]; +}; + + +/* SD Block Length */ +/* 2^9 = 512 Bytes, The HW maximum read/write data length */ +#define SD_BLOCK_LEN 9 + +struct ene_ub6250_info { + /* for 6250 code */ + struct SD_STATUS SD_Status; + struct MS_STATUS MS_Status; + struct SM_STATUS SM_Status; + + /* ----- SD Control Data ---------------- */ + /*SD_REGISTER SD_Regs; */ + u16 SD_Block_Mult; + u8 SD_READ_BL_LEN; + u16 SD_C_SIZE; + u8 SD_C_SIZE_MULT; + + /* SD/MMC New spec. */ + u8 SD_SPEC_VER; + u8 SD_CSD_VER; + u8 SD20_HIGH_CAPACITY; + u32 HC_C_SIZE; + u8 MMC_SPEC_VER; + u8 MMC_BusWidth; + u8 MMC_HIGH_CAPACITY; + + /*----- MS Control Data ---------------- */ + bool MS_SWWP; + u32 MSP_TotalBlock; + struct ms_lib_ctrl MS_Lib; + bool MS_IsRWPage; + u16 MS_Model; + + /*----- SM Control Data ---------------- */ + u8 SM_DeviceID; + u8 SM_CardID; + + unsigned char *testbuf; + u8 BIN_FLAG; + u32 bl_num; + int SrbStatus; + + /*------Power Managerment ---------------*/ + bool Power_IsResum; +}; + +static int ene_sd_init(struct us_data *us); +static int ene_ms_init(struct us_data *us); +static int ene_load_bincode(struct us_data *us, unsigned char flag); + +static void ene_ub6250_info_destructor(void *extra) +{ + if (!extra) + return; +} + +static int ene_send_scsi_cmd(struct us_data *us, u8 fDir, void *buf, int use_sg) +{ + struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf; + struct bulk_cs_wrap *bcs = (struct bulk_cs_wrap *) us->iobuf; + + int result; + unsigned int residue; + unsigned int cswlen = 0, partial = 0; + unsigned int transfer_length = bcb->DataTransferLength; + + /* usb_stor_dbg(us, "transport --- ene_send_scsi_cmd\n"); */ + /* send cmd to out endpoint */ + result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, + bcb, US_BULK_CB_WRAP_LEN, NULL); + if (result != USB_STOR_XFER_GOOD) { + usb_stor_dbg(us, "send cmd to out endpoint fail ---\n"); + return USB_STOR_TRANSPORT_ERROR; + } + + if (buf) { + unsigned int pipe = fDir; + + if (fDir == FDIR_READ) + pipe = us->recv_bulk_pipe; + else + pipe = us->send_bulk_pipe; + + /* Bulk */ + if (use_sg) { + result = usb_stor_bulk_srb(us, pipe, us->srb); + } else { + result = usb_stor_bulk_transfer_sg(us, pipe, buf, + transfer_length, 0, &partial); + } + if (result != USB_STOR_XFER_GOOD) { + usb_stor_dbg(us, "data transfer fail ---\n"); + return USB_STOR_TRANSPORT_ERROR; + } + } + + /* Get CSW for device status */ + result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, bcs, + US_BULK_CS_WRAP_LEN, &cswlen); + + if (result == USB_STOR_XFER_SHORT && cswlen == 0) { + usb_stor_dbg(us, "Received 0-length CSW; retrying...\n"); + result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, + bcs, US_BULK_CS_WRAP_LEN, &cswlen); + } + + if (result == USB_STOR_XFER_STALLED) { + /* get the status again */ + usb_stor_dbg(us, "Attempting to get CSW (2nd try)...\n"); + result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, + bcs, US_BULK_CS_WRAP_LEN, NULL); + } + + if (result != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + /* check bulk status */ + residue = le32_to_cpu(bcs->Residue); + + /* try to compute the actual residue, based on how much data + * was really transferred and what the device tells us */ + if (residue && !(us->fflags & US_FL_IGNORE_RESIDUE)) { + residue = min(residue, transfer_length); + if (us->srb != NULL) + scsi_set_resid(us->srb, max(scsi_get_resid(us->srb), + (int)residue)); + } + + if (bcs->Status != US_BULK_STAT_OK) + return USB_STOR_TRANSPORT_ERROR; + + return USB_STOR_TRANSPORT_GOOD; +} + +static int sd_scsi_test_unit_ready(struct us_data *us, struct scsi_cmnd *srb) +{ + struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra; + + if (info->SD_Status.Insert && info->SD_Status.Ready) + return USB_STOR_TRANSPORT_GOOD; + else { + ene_sd_init(us); + return USB_STOR_TRANSPORT_GOOD; + } + + return USB_STOR_TRANSPORT_GOOD; +} + +static int sd_scsi_inquiry(struct us_data *us, struct scsi_cmnd *srb) +{ + unsigned char data_ptr[36] = { + 0x00, 0x80, 0x02, 0x00, 0x1F, 0x00, 0x00, 0x00, 0x55, + 0x53, 0x42, 0x32, 0x2E, 0x30, 0x20, 0x20, 0x43, 0x61, + 0x72, 0x64, 0x52, 0x65, 0x61, 0x64, 0x65, 0x72, 0x20, + 0x20, 0x20, 0x20, 0x20, 0x20, 0x30, 0x31, 0x30, 0x30 }; + + usb_stor_set_xfer_buf(data_ptr, 36, srb); + return USB_STOR_TRANSPORT_GOOD; +} + +static int sd_scsi_mode_sense(struct us_data *us, struct scsi_cmnd *srb) +{ + struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra; + unsigned char mediaNoWP[12] = { + 0x0b, 0x00, 0x00, 0x08, 0x00, 0x00, + 0x71, 0xc0, 0x00, 0x00, 0x02, 0x00 }; + unsigned char mediaWP[12] = { + 0x0b, 0x00, 0x80, 0x08, 0x00, 0x00, + 0x71, 0xc0, 0x00, 0x00, 0x02, 0x00 }; + + if (info->SD_Status.WtP) + usb_stor_set_xfer_buf(mediaWP, 12, srb); + else + usb_stor_set_xfer_buf(mediaNoWP, 12, srb); + + + return USB_STOR_TRANSPORT_GOOD; +} + +static int sd_scsi_read_capacity(struct us_data *us, struct scsi_cmnd *srb) +{ + u32 bl_num; + u32 bl_len; + unsigned int offset = 0; + unsigned char buf[8]; + struct scatterlist *sg = NULL; + struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra; + + usb_stor_dbg(us, "sd_scsi_read_capacity\n"); + if (info->SD_Status.HiCapacity) { + bl_len = 0x200; + if (info->SD_Status.IsMMC) + bl_num = info->HC_C_SIZE-1; + else + bl_num = (info->HC_C_SIZE + 1) * 1024 - 1; + } else { + bl_len = 1 << (info->SD_READ_BL_LEN); + bl_num = info->SD_Block_Mult * (info->SD_C_SIZE + 1) + * (1 << (info->SD_C_SIZE_MULT + 2)) - 1; + } + info->bl_num = bl_num; + usb_stor_dbg(us, "bl_len = %x\n", bl_len); + usb_stor_dbg(us, "bl_num = %x\n", bl_num); + + /*srb->request_bufflen = 8; */ + buf[0] = (bl_num >> 24) & 0xff; + buf[1] = (bl_num >> 16) & 0xff; + buf[2] = (bl_num >> 8) & 0xff; + buf[3] = (bl_num >> 0) & 0xff; + buf[4] = (bl_len >> 24) & 0xff; + buf[5] = (bl_len >> 16) & 0xff; + buf[6] = (bl_len >> 8) & 0xff; + buf[7] = (bl_len >> 0) & 0xff; + + usb_stor_access_xfer_buf(buf, 8, srb, &sg, &offset, TO_XFER_BUF); + + return USB_STOR_TRANSPORT_GOOD; +} + +static int sd_scsi_read(struct us_data *us, struct scsi_cmnd *srb) +{ + int result; + unsigned char *cdb = srb->cmnd; + struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf; + struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra; + + u32 bn = ((cdb[2] << 24) & 0xff000000) | ((cdb[3] << 16) & 0x00ff0000) | + ((cdb[4] << 8) & 0x0000ff00) | ((cdb[5] << 0) & 0x000000ff); + u16 blen = ((cdb[7] << 8) & 0xff00) | ((cdb[8] << 0) & 0x00ff); + u32 bnByte = bn * 0x200; + u32 blenByte = blen * 0x200; + + if (bn > info->bl_num) + return USB_STOR_TRANSPORT_ERROR; + + result = ene_load_bincode(us, SD_RW_PATTERN); + if (result != USB_STOR_XFER_GOOD) { + usb_stor_dbg(us, "Load SD RW pattern Fail !!\n"); + return USB_STOR_TRANSPORT_ERROR; + } + + if (info->SD_Status.HiCapacity) + bnByte = bn; + + /* set up the command wrapper */ + memset(bcb, 0, sizeof(struct bulk_cb_wrap)); + bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN); + bcb->DataTransferLength = blenByte; + bcb->Flags = US_BULK_FLAG_IN; + bcb->CDB[0] = 0xF1; + bcb->CDB[5] = (unsigned char)(bnByte); + bcb->CDB[4] = (unsigned char)(bnByte>>8); + bcb->CDB[3] = (unsigned char)(bnByte>>16); + bcb->CDB[2] = (unsigned char)(bnByte>>24); + + result = ene_send_scsi_cmd(us, FDIR_READ, scsi_sglist(srb), 1); + return result; +} + +static int sd_scsi_write(struct us_data *us, struct scsi_cmnd *srb) +{ + int result; + unsigned char *cdb = srb->cmnd; + struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf; + struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra; + + u32 bn = ((cdb[2] << 24) & 0xff000000) | ((cdb[3] << 16) & 0x00ff0000) | + ((cdb[4] << 8) & 0x0000ff00) | ((cdb[5] << 0) & 0x000000ff); + u16 blen = ((cdb[7] << 8) & 0xff00) | ((cdb[8] << 0) & 0x00ff); + u32 bnByte = bn * 0x200; + u32 blenByte = blen * 0x200; + + if (bn > info->bl_num) + return USB_STOR_TRANSPORT_ERROR; + + result = ene_load_bincode(us, SD_RW_PATTERN); + if (result != USB_STOR_XFER_GOOD) { + usb_stor_dbg(us, "Load SD RW pattern Fail !!\n"); + return USB_STOR_TRANSPORT_ERROR; + } + + if (info->SD_Status.HiCapacity) + bnByte = bn; + + /* set up the command wrapper */ + memset(bcb, 0, sizeof(struct bulk_cb_wrap)); + bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN); + bcb->DataTransferLength = blenByte; + bcb->Flags = 0x00; + bcb->CDB[0] = 0xF0; + bcb->CDB[5] = (unsigned char)(bnByte); + bcb->CDB[4] = (unsigned char)(bnByte>>8); + bcb->CDB[3] = (unsigned char)(bnByte>>16); + bcb->CDB[2] = (unsigned char)(bnByte>>24); + + result = ene_send_scsi_cmd(us, FDIR_WRITE, scsi_sglist(srb), 1); + return result; +} + +/* + * ENE MS Card + */ + +static int ms_lib_set_logicalpair(struct us_data *us, u16 logblk, u16 phyblk) +{ + struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra; + + if ((logblk >= info->MS_Lib.NumberOfLogBlock) || (phyblk >= info->MS_Lib.NumberOfPhyBlock)) + return (u32)-1; + + info->MS_Lib.Phy2LogMap[phyblk] = logblk; + info->MS_Lib.Log2PhyMap[logblk] = phyblk; + + return 0; +} + +static int ms_lib_set_logicalblockmark(struct us_data *us, u16 phyblk, u16 mark) +{ + struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra; + + if (phyblk >= info->MS_Lib.NumberOfPhyBlock) + return (u32)-1; + + info->MS_Lib.Phy2LogMap[phyblk] = mark; + + return 0; +} + +static int ms_lib_set_initialerrorblock(struct us_data *us, u16 phyblk) +{ + return ms_lib_set_logicalblockmark(us, phyblk, MS_LB_INITIAL_ERROR); +} + +static int ms_lib_set_bootblockmark(struct us_data *us, u16 phyblk) +{ + return ms_lib_set_logicalblockmark(us, phyblk, MS_LB_BOOT_BLOCK); +} + +static int ms_lib_free_logicalmap(struct us_data *us) +{ + struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra; + + kfree(info->MS_Lib.Phy2LogMap); + info->MS_Lib.Phy2LogMap = NULL; + + kfree(info->MS_Lib.Log2PhyMap); + info->MS_Lib.Log2PhyMap = NULL; + + return 0; +} + +static int ms_lib_alloc_logicalmap(struct us_data *us) +{ + u32 i; + struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra; + + info->MS_Lib.Phy2LogMap = kmalloc(info->MS_Lib.NumberOfPhyBlock * sizeof(u16), GFP_KERNEL); + info->MS_Lib.Log2PhyMap = kmalloc(info->MS_Lib.NumberOfLogBlock * sizeof(u16), GFP_KERNEL); + + if ((info->MS_Lib.Phy2LogMap == NULL) || (info->MS_Lib.Log2PhyMap == NULL)) { + ms_lib_free_logicalmap(us); + return (u32)-1; + } + + for (i = 0; i < info->MS_Lib.NumberOfPhyBlock; i++) + info->MS_Lib.Phy2LogMap[i] = MS_LB_NOT_USED; + + for (i = 0; i < info->MS_Lib.NumberOfLogBlock; i++) + info->MS_Lib.Log2PhyMap[i] = MS_LB_NOT_USED; + + return 0; +} + +static void ms_lib_clear_writebuf(struct us_data *us) +{ + int i; + struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra; + + info->MS_Lib.wrtblk = (u16)-1; + ms_lib_clear_pagemap(info); + + if (info->MS_Lib.blkpag) + memset(info->MS_Lib.blkpag, 0xff, info->MS_Lib.PagesPerBlock * info->MS_Lib.BytesPerSector); + + if (info->MS_Lib.blkext) { + for (i = 0; i < info->MS_Lib.PagesPerBlock; i++) { + info->MS_Lib.blkext[i].status1 = MS_REG_ST1_DEFAULT; + info->MS_Lib.blkext[i].ovrflg = MS_REG_OVR_DEFAULT; + info->MS_Lib.blkext[i].mngflg = MS_REG_MNG_DEFAULT; + info->MS_Lib.blkext[i].logadr = MS_LB_NOT_USED; + } + } +} + +static int ms_count_freeblock(struct us_data *us, u16 PhyBlock) +{ + u32 Ende, Count; + struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra; + + Ende = PhyBlock + MS_PHYSICAL_BLOCKS_PER_SEGMENT; + for (Count = 0; PhyBlock < Ende; PhyBlock++) { + switch (info->MS_Lib.Phy2LogMap[PhyBlock]) { + case MS_LB_NOT_USED: + case MS_LB_NOT_USED_ERASED: + Count++; + default: + break; + } + } + + return Count; +} + +static int ms_read_readpage(struct us_data *us, u32 PhyBlockAddr, + u8 PageNum, u32 *PageBuf, struct ms_lib_type_extdat *ExtraDat) +{ + struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf; + int result; + u8 ExtBuf[4]; + u32 bn = PhyBlockAddr * 0x20 + PageNum; + + /* printk(KERN_INFO "MS --- MS_ReaderReadPage, + PhyBlockAddr = %x, PageNum = %x\n", PhyBlockAddr, PageNum); */ + + result = ene_load_bincode(us, MS_RW_PATTERN); + if (result != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + /* Read Page Data */ + memset(bcb, 0, sizeof(struct bulk_cb_wrap)); + bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN); + bcb->DataTransferLength = 0x200; + bcb->Flags = US_BULK_FLAG_IN; + bcb->CDB[0] = 0xF1; + + bcb->CDB[1] = 0x02; /* in init.c ENE_MSInit() is 0x01 */ + + bcb->CDB[5] = (unsigned char)(bn); + bcb->CDB[4] = (unsigned char)(bn>>8); + bcb->CDB[3] = (unsigned char)(bn>>16); + bcb->CDB[2] = (unsigned char)(bn>>24); + + result = ene_send_scsi_cmd(us, FDIR_READ, PageBuf, 0); + if (result != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + + /* Read Extra Data */ + memset(bcb, 0, sizeof(struct bulk_cb_wrap)); + bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN); + bcb->DataTransferLength = 0x4; + bcb->Flags = US_BULK_FLAG_IN; + bcb->CDB[0] = 0xF1; + bcb->CDB[1] = 0x03; + + bcb->CDB[5] = (unsigned char)(PageNum); + bcb->CDB[4] = (unsigned char)(PhyBlockAddr); + bcb->CDB[3] = (unsigned char)(PhyBlockAddr>>8); + bcb->CDB[2] = (unsigned char)(PhyBlockAddr>>16); + bcb->CDB[6] = 0x01; + + result = ene_send_scsi_cmd(us, FDIR_READ, &ExtBuf, 0); + if (result != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + ExtraDat->reserved = 0; + ExtraDat->intr = 0x80; /* Not yet,fireware support */ + ExtraDat->status0 = 0x10; /* Not yet,fireware support */ + + ExtraDat->status1 = 0x00; /* Not yet,fireware support */ + ExtraDat->ovrflg = ExtBuf[0]; + ExtraDat->mngflg = ExtBuf[1]; + ExtraDat->logadr = memstick_logaddr(ExtBuf[2], ExtBuf[3]); + + return USB_STOR_TRANSPORT_GOOD; +} + +static int ms_lib_process_bootblock(struct us_data *us, u16 PhyBlock, u8 *PageData) +{ + struct ms_bootblock_sysent *SysEntry; + struct ms_bootblock_sysinf *SysInfo; + u32 i, result; + u8 PageNumber; + u8 *PageBuffer; + struct ms_lib_type_extdat ExtraData; + struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra; + + PageBuffer = kmalloc(MS_BYTES_PER_PAGE, GFP_KERNEL); + if (PageBuffer == NULL) + return (u32)-1; + + result = (u32)-1; + + SysInfo = &(((struct ms_bootblock_page0 *)PageData)->sysinf); + + if ((SysInfo->bMsClass != MS_SYSINF_MSCLASS_TYPE_1) || + (be16_to_cpu(SysInfo->wPageSize) != MS_SYSINF_PAGE_SIZE) || + ((SysInfo->bSecuritySupport & MS_SYSINF_SECURITY) == MS_SYSINF_SECURITY_SUPPORT) || + (SysInfo->bReserved1 != MS_SYSINF_RESERVED1) || + (SysInfo->bReserved2 != MS_SYSINF_RESERVED2) || + (SysInfo->bFormatType != MS_SYSINF_FORMAT_FAT) || + (SysInfo->bUsage != MS_SYSINF_USAGE_GENERAL)) + goto exit; + /* */ + switch (info->MS_Lib.cardType = SysInfo->bCardType) { + case MS_SYSINF_CARDTYPE_RDONLY: + ms_lib_ctrl_set(info, MS_LIB_CTRL_RDONLY); + break; + case MS_SYSINF_CARDTYPE_RDWR: + ms_lib_ctrl_reset(info, MS_LIB_CTRL_RDONLY); + break; + case MS_SYSINF_CARDTYPE_HYBRID: + default: + goto exit; + } + + info->MS_Lib.blockSize = be16_to_cpu(SysInfo->wBlockSize); + info->MS_Lib.NumberOfPhyBlock = be16_to_cpu(SysInfo->wBlockNumber); + info->MS_Lib.NumberOfLogBlock = be16_to_cpu(SysInfo->wTotalBlockNumber)-2; + info->MS_Lib.PagesPerBlock = info->MS_Lib.blockSize * SIZE_OF_KIRO / MS_BYTES_PER_PAGE; + info->MS_Lib.NumberOfSegment = info->MS_Lib.NumberOfPhyBlock / MS_PHYSICAL_BLOCKS_PER_SEGMENT; + info->MS_Model = be16_to_cpu(SysInfo->wMemorySize); + + /*Allocate to all number of logicalblock and physicalblock */ + if (ms_lib_alloc_logicalmap(us)) + goto exit; + + /* Mark the book block */ + ms_lib_set_bootblockmark(us, PhyBlock); + + SysEntry = &(((struct ms_bootblock_page0 *)PageData)->sysent); + + for (i = 0; i < MS_NUMBER_OF_SYSTEM_ENTRY; i++) { + u32 EntryOffset, EntrySize; + + EntryOffset = be32_to_cpu(SysEntry->entry[i].dwStart); + + if (EntryOffset == 0xffffff) + continue; + EntrySize = be32_to_cpu(SysEntry->entry[i].dwSize); + + if (EntrySize == 0) + continue; + + if (EntryOffset + MS_BYTES_PER_PAGE + EntrySize > info->MS_Lib.blockSize * (u32)SIZE_OF_KIRO) + continue; + + if (i == 0) { + u8 PrevPageNumber = 0; + u16 phyblk; + + if (SysEntry->entry[i].bType != MS_SYSENT_TYPE_INVALID_BLOCK) + goto exit; + + while (EntrySize > 0) { + + PageNumber = (u8)(EntryOffset / MS_BYTES_PER_PAGE + 1); + if (PageNumber != PrevPageNumber) { + switch (ms_read_readpage(us, PhyBlock, PageNumber, (u32 *)PageBuffer, &ExtraData)) { + case MS_STATUS_SUCCESS: + break; + case MS_STATUS_WRITE_PROTECT: + case MS_ERROR_FLASH_READ: + case MS_STATUS_ERROR: + default: + goto exit; + } + + PrevPageNumber = PageNumber; + } + + phyblk = be16_to_cpu(*(u16 *)(PageBuffer + (EntryOffset % MS_BYTES_PER_PAGE))); + if (phyblk < 0x0fff) + ms_lib_set_initialerrorblock(us, phyblk); + + EntryOffset += 2; + EntrySize -= 2; + } + } else if (i == 1) { /* CIS/IDI */ + struct ms_bootblock_idi *idi; + + if (SysEntry->entry[i].bType != MS_SYSENT_TYPE_CIS_IDI) + goto exit; + + switch (ms_read_readpage(us, PhyBlock, (u8)(EntryOffset / MS_BYTES_PER_PAGE + 1), (u32 *)PageBuffer, &ExtraData)) { + case MS_STATUS_SUCCESS: + break; + case MS_STATUS_WRITE_PROTECT: + case MS_ERROR_FLASH_READ: + case MS_STATUS_ERROR: + default: + goto exit; + } + + idi = &((struct ms_bootblock_cis_idi *)(PageBuffer + (EntryOffset % MS_BYTES_PER_PAGE)))->idi.idi; + if (le16_to_cpu(idi->wIDIgeneralConfiguration) != MS_IDI_GENERAL_CONF) + goto exit; + + info->MS_Lib.BytesPerSector = le16_to_cpu(idi->wIDIbytesPerSector); + if (info->MS_Lib.BytesPerSector != MS_BYTES_PER_PAGE) + goto exit; + } + } /* End for .. */ + + result = 0; + +exit: + if (result) + ms_lib_free_logicalmap(us); + + kfree(PageBuffer); + + result = 0; + return result; +} + +static void ms_lib_free_writebuf(struct us_data *us) +{ + struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra; + info->MS_Lib.wrtblk = (u16)-1; /* set to -1 */ + + /* memset((fdoExt)->MS_Lib.pagemap, 0, sizeof((fdoExt)->MS_Lib.pagemap)) */ + + ms_lib_clear_pagemap(info); /* (pdx)->MS_Lib.pagemap memset 0 in ms.h */ + + if (info->MS_Lib.blkpag) { + kfree((u8 *)(info->MS_Lib.blkpag)); /* Arnold test ... */ + info->MS_Lib.blkpag = NULL; + } + + if (info->MS_Lib.blkext) { + kfree((u8 *)(info->MS_Lib.blkext)); /* Arnold test ... */ + info->MS_Lib.blkext = NULL; + } +} + + +static void ms_lib_free_allocatedarea(struct us_data *us) +{ + struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra; + + ms_lib_free_writebuf(us); /* Free MS_Lib.pagemap */ + ms_lib_free_logicalmap(us); /* kfree MS_Lib.Phy2LogMap and MS_Lib.Log2PhyMap */ + + /* set struct us point flag to 0 */ + info->MS_Lib.flags = 0; + info->MS_Lib.BytesPerSector = 0; + info->MS_Lib.SectorsPerCylinder = 0; + + info->MS_Lib.cardType = 0; + info->MS_Lib.blockSize = 0; + info->MS_Lib.PagesPerBlock = 0; + + info->MS_Lib.NumberOfPhyBlock = 0; + info->MS_Lib.NumberOfLogBlock = 0; +} + + +static int ms_lib_alloc_writebuf(struct us_data *us) +{ + struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra; + + info->MS_Lib.wrtblk = (u16)-1; + + info->MS_Lib.blkpag = kmalloc(info->MS_Lib.PagesPerBlock * info->MS_Lib.BytesPerSector, GFP_KERNEL); + info->MS_Lib.blkext = kmalloc(info->MS_Lib.PagesPerBlock * sizeof(struct ms_lib_type_extdat), GFP_KERNEL); + + if ((info->MS_Lib.blkpag == NULL) || (info->MS_Lib.blkext == NULL)) { + ms_lib_free_writebuf(us); + return (u32)-1; + } + + ms_lib_clear_writebuf(us); + +return 0; +} + +static int ms_lib_force_setlogical_pair(struct us_data *us, u16 logblk, u16 phyblk) +{ + struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra; + + if (logblk == MS_LB_NOT_USED) + return 0; + + if ((logblk >= info->MS_Lib.NumberOfLogBlock) || + (phyblk >= info->MS_Lib.NumberOfPhyBlock)) + return (u32)-1; + + info->MS_Lib.Phy2LogMap[phyblk] = logblk; + info->MS_Lib.Log2PhyMap[logblk] = phyblk; + + return 0; +} + +static int ms_read_copyblock(struct us_data *us, u16 oldphy, u16 newphy, + u16 PhyBlockAddr, u8 PageNum, unsigned char *buf, u16 len) +{ + struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf; + int result; + + /* printk(KERN_INFO "MS_ReaderCopyBlock --- PhyBlockAddr = %x, + PageNum = %x\n", PhyBlockAddr, PageNum); */ + result = ene_load_bincode(us, MS_RW_PATTERN); + if (result != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + memset(bcb, 0, sizeof(struct bulk_cb_wrap)); + bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN); + bcb->DataTransferLength = 0x200*len; + bcb->Flags = 0x00; + bcb->CDB[0] = 0xF0; + bcb->CDB[1] = 0x08; + bcb->CDB[4] = (unsigned char)(oldphy); + bcb->CDB[3] = (unsigned char)(oldphy>>8); + bcb->CDB[2] = 0; /* (BYTE)(oldphy>>16) */ + bcb->CDB[7] = (unsigned char)(newphy); + bcb->CDB[6] = (unsigned char)(newphy>>8); + bcb->CDB[5] = 0; /* (BYTE)(newphy>>16) */ + bcb->CDB[9] = (unsigned char)(PhyBlockAddr); + bcb->CDB[8] = (unsigned char)(PhyBlockAddr>>8); + bcb->CDB[10] = PageNum; + + result = ene_send_scsi_cmd(us, FDIR_WRITE, buf, 0); + if (result != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + return USB_STOR_TRANSPORT_GOOD; +} + +static int ms_read_eraseblock(struct us_data *us, u32 PhyBlockAddr) +{ + struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf; + int result; + u32 bn = PhyBlockAddr; + + /* printk(KERN_INFO "MS --- ms_read_eraseblock, + PhyBlockAddr = %x\n", PhyBlockAddr); */ + result = ene_load_bincode(us, MS_RW_PATTERN); + if (result != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + memset(bcb, 0, sizeof(struct bulk_cb_wrap)); + bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN); + bcb->DataTransferLength = 0x200; + bcb->Flags = US_BULK_FLAG_IN; + bcb->CDB[0] = 0xF2; + bcb->CDB[1] = 0x06; + bcb->CDB[4] = (unsigned char)(bn); + bcb->CDB[3] = (unsigned char)(bn>>8); + bcb->CDB[2] = (unsigned char)(bn>>16); + + result = ene_send_scsi_cmd(us, FDIR_READ, NULL, 0); + if (result != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + return USB_STOR_TRANSPORT_GOOD; +} + +static int ms_lib_check_disableblock(struct us_data *us, u16 PhyBlock) +{ + unsigned char *PageBuf = NULL; + u16 result = MS_STATUS_SUCCESS; + u16 blk, index = 0; + struct ms_lib_type_extdat extdat; + struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra; + + PageBuf = kmalloc(MS_BYTES_PER_PAGE, GFP_KERNEL); + if (PageBuf == NULL) { + result = MS_NO_MEMORY_ERROR; + goto exit; + } + + ms_read_readpage(us, PhyBlock, 1, (u32 *)PageBuf, &extdat); + do { + blk = be16_to_cpu(PageBuf[index]); + if (blk == MS_LB_NOT_USED) + break; + if (blk == info->MS_Lib.Log2PhyMap[0]) { + result = MS_ERROR_FLASH_READ; + break; + } + index++; + } while (1); + +exit: + kfree(PageBuf); + return result; +} + +static int ms_lib_setacquired_errorblock(struct us_data *us, u16 phyblk) +{ + u16 log; + struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra; + + if (phyblk >= info->MS_Lib.NumberOfPhyBlock) + return (u32)-1; + + log = info->MS_Lib.Phy2LogMap[phyblk]; + + if (log < info->MS_Lib.NumberOfLogBlock) + info->MS_Lib.Log2PhyMap[log] = MS_LB_NOT_USED; + + if (info->MS_Lib.Phy2LogMap[phyblk] != MS_LB_INITIAL_ERROR) + info->MS_Lib.Phy2LogMap[phyblk] = MS_LB_ACQUIRED_ERROR; + + return 0; +} + +static int ms_lib_overwrite_extra(struct us_data *us, u32 PhyBlockAddr, + u8 PageNum, u8 OverwriteFlag) +{ + struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf; + int result; + + /* printk("MS --- MS_LibOverwriteExtra, + PhyBlockAddr = %x, PageNum = %x\n", PhyBlockAddr, PageNum); */ + result = ene_load_bincode(us, MS_RW_PATTERN); + if (result != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + memset(bcb, 0, sizeof(struct bulk_cb_wrap)); + bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN); + bcb->DataTransferLength = 0x4; + bcb->Flags = US_BULK_FLAG_IN; + bcb->CDB[0] = 0xF2; + bcb->CDB[1] = 0x05; + bcb->CDB[5] = (unsigned char)(PageNum); + bcb->CDB[4] = (unsigned char)(PhyBlockAddr); + bcb->CDB[3] = (unsigned char)(PhyBlockAddr>>8); + bcb->CDB[2] = (unsigned char)(PhyBlockAddr>>16); + bcb->CDB[6] = OverwriteFlag; + bcb->CDB[7] = 0xFF; + bcb->CDB[8] = 0xFF; + bcb->CDB[9] = 0xFF; + + result = ene_send_scsi_cmd(us, FDIR_READ, NULL, 0); + if (result != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + return USB_STOR_TRANSPORT_GOOD; +} + +static int ms_lib_error_phyblock(struct us_data *us, u16 phyblk) +{ + struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra; + + if (phyblk >= info->MS_Lib.NumberOfPhyBlock) + return MS_STATUS_ERROR; + + ms_lib_setacquired_errorblock(us, phyblk); + + if (ms_lib_iswritable(info)) + return ms_lib_overwrite_extra(us, phyblk, 0, (u8)(~MS_REG_OVR_BKST & BYTE_MASK)); + + return MS_STATUS_SUCCESS; +} + +static int ms_lib_erase_phyblock(struct us_data *us, u16 phyblk) +{ + u16 log; + struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra; + + if (phyblk >= info->MS_Lib.NumberOfPhyBlock) + return MS_STATUS_ERROR; + + log = info->MS_Lib.Phy2LogMap[phyblk]; + + if (log < info->MS_Lib.NumberOfLogBlock) + info->MS_Lib.Log2PhyMap[log] = MS_LB_NOT_USED; + + info->MS_Lib.Phy2LogMap[phyblk] = MS_LB_NOT_USED; + + if (ms_lib_iswritable(info)) { + switch (ms_read_eraseblock(us, phyblk)) { + case MS_STATUS_SUCCESS: + info->MS_Lib.Phy2LogMap[phyblk] = MS_LB_NOT_USED_ERASED; + return MS_STATUS_SUCCESS; + case MS_ERROR_FLASH_ERASE: + case MS_STATUS_INT_ERROR: + ms_lib_error_phyblock(us, phyblk); + return MS_ERROR_FLASH_ERASE; + case MS_STATUS_ERROR: + default: + ms_lib_ctrl_set(info, MS_LIB_CTRL_RDONLY); /* MS_LibCtrlSet will used by ENE_MSInit ,need check, and why us to info*/ + ms_lib_setacquired_errorblock(us, phyblk); + return MS_STATUS_ERROR; + } + } + + ms_lib_setacquired_errorblock(us, phyblk); + + return MS_STATUS_SUCCESS; +} + +static int ms_lib_read_extra(struct us_data *us, u32 PhyBlock, + u8 PageNum, struct ms_lib_type_extdat *ExtraDat) +{ + struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf; + int result; + u8 ExtBuf[4]; + + /* printk("MS_LibReadExtra --- PhyBlock = %x, PageNum = %x\n", PhyBlock, PageNum); */ + memset(bcb, 0, sizeof(struct bulk_cb_wrap)); + bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN); + bcb->DataTransferLength = 0x4; + bcb->Flags = US_BULK_FLAG_IN; + bcb->CDB[0] = 0xF1; + bcb->CDB[1] = 0x03; + bcb->CDB[5] = (unsigned char)(PageNum); + bcb->CDB[4] = (unsigned char)(PhyBlock); + bcb->CDB[3] = (unsigned char)(PhyBlock>>8); + bcb->CDB[2] = (unsigned char)(PhyBlock>>16); + bcb->CDB[6] = 0x01; + + result = ene_send_scsi_cmd(us, FDIR_READ, &ExtBuf, 0); + if (result != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + ExtraDat->reserved = 0; + ExtraDat->intr = 0x80; /* Not yet, waiting for fireware support */ + ExtraDat->status0 = 0x10; /* Not yet, waiting for fireware support */ + ExtraDat->status1 = 0x00; /* Not yet, waiting for fireware support */ + ExtraDat->ovrflg = ExtBuf[0]; + ExtraDat->mngflg = ExtBuf[1]; + ExtraDat->logadr = memstick_logaddr(ExtBuf[2], ExtBuf[3]); + + return USB_STOR_TRANSPORT_GOOD; +} + +static int ms_libsearch_block_from_physical(struct us_data *us, u16 phyblk) +{ + u16 Newblk; + u16 blk; + struct ms_lib_type_extdat extdat; /* need check */ + struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra; + + + if (phyblk >= info->MS_Lib.NumberOfPhyBlock) + return MS_LB_ERROR; + + for (blk = phyblk + 1; blk != phyblk; blk++) { + if ((blk & MS_PHYSICAL_BLOCKS_PER_SEGMENT_MASK) == 0) + blk -= MS_PHYSICAL_BLOCKS_PER_SEGMENT; + + Newblk = info->MS_Lib.Phy2LogMap[blk]; + if (info->MS_Lib.Phy2LogMap[blk] == MS_LB_NOT_USED_ERASED) { + return blk; + } else if (info->MS_Lib.Phy2LogMap[blk] == MS_LB_NOT_USED) { + switch (ms_lib_read_extra(us, blk, 0, &extdat)) { + case MS_STATUS_SUCCESS: + case MS_STATUS_SUCCESS_WITH_ECC: + break; + case MS_NOCARD_ERROR: + return MS_NOCARD_ERROR; + case MS_STATUS_INT_ERROR: + return MS_LB_ERROR; + case MS_ERROR_FLASH_READ: + default: + ms_lib_setacquired_errorblock(us, blk); + continue; + } /* End switch */ + + if ((extdat.ovrflg & MS_REG_OVR_BKST) != MS_REG_OVR_BKST_OK) { + ms_lib_setacquired_errorblock(us, blk); + continue; + } + + switch (ms_lib_erase_phyblock(us, blk)) { + case MS_STATUS_SUCCESS: + return blk; + case MS_STATUS_ERROR: + return MS_LB_ERROR; + case MS_ERROR_FLASH_ERASE: + default: + ms_lib_error_phyblock(us, blk); + break; + } + } + } /* End for */ + + return MS_LB_ERROR; +} +static int ms_libsearch_block_from_logical(struct us_data *us, u16 logblk) +{ + u16 phyblk; + struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra; + + phyblk = ms_libconv_to_physical(info, logblk); + if (phyblk >= MS_LB_ERROR) { + if (logblk >= info->MS_Lib.NumberOfLogBlock) + return MS_LB_ERROR; + + phyblk = (logblk + MS_NUMBER_OF_BOOT_BLOCK) / MS_LOGICAL_BLOCKS_PER_SEGMENT; + phyblk *= MS_PHYSICAL_BLOCKS_PER_SEGMENT; + phyblk += MS_PHYSICAL_BLOCKS_PER_SEGMENT - 1; + } + + return ms_libsearch_block_from_physical(us, phyblk); +} + +static int ms_scsi_test_unit_ready(struct us_data *us, struct scsi_cmnd *srb) +{ + struct ene_ub6250_info *info = (struct ene_ub6250_info *)(us->extra); + + /* pr_info("MS_SCSI_Test_Unit_Ready\n"); */ + if (info->MS_Status.Insert && info->MS_Status.Ready) { + return USB_STOR_TRANSPORT_GOOD; + } else { + ene_ms_init(us); + return USB_STOR_TRANSPORT_GOOD; + } + + return USB_STOR_TRANSPORT_GOOD; +} + +static int ms_scsi_inquiry(struct us_data *us, struct scsi_cmnd *srb) +{ + /* pr_info("MS_SCSI_Inquiry\n"); */ + unsigned char data_ptr[36] = { + 0x00, 0x80, 0x02, 0x00, 0x1F, 0x00, 0x00, 0x00, 0x55, + 0x53, 0x42, 0x32, 0x2E, 0x30, 0x20, 0x20, 0x43, 0x61, + 0x72, 0x64, 0x52, 0x65, 0x61, 0x64, 0x65, 0x72, 0x20, + 0x20, 0x20, 0x20, 0x20, 0x20, 0x30, 0x31, 0x30, 0x30}; + + usb_stor_set_xfer_buf(data_ptr, 36, srb); + return USB_STOR_TRANSPORT_GOOD; +} + +static int ms_scsi_mode_sense(struct us_data *us, struct scsi_cmnd *srb) +{ + struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra; + unsigned char mediaNoWP[12] = { + 0x0b, 0x00, 0x00, 0x08, 0x00, 0x00, + 0x71, 0xc0, 0x00, 0x00, 0x02, 0x00 }; + unsigned char mediaWP[12] = { + 0x0b, 0x00, 0x80, 0x08, 0x00, 0x00, + 0x71, 0xc0, 0x00, 0x00, 0x02, 0x00 }; + + if (info->MS_Status.WtP) + usb_stor_set_xfer_buf(mediaWP, 12, srb); + else + usb_stor_set_xfer_buf(mediaNoWP, 12, srb); + + return USB_STOR_TRANSPORT_GOOD; +} + +static int ms_scsi_read_capacity(struct us_data *us, struct scsi_cmnd *srb) +{ + u32 bl_num; + u16 bl_len; + unsigned int offset = 0; + unsigned char buf[8]; + struct scatterlist *sg = NULL; + struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra; + + usb_stor_dbg(us, "ms_scsi_read_capacity\n"); + bl_len = 0x200; + if (info->MS_Status.IsMSPro) + bl_num = info->MSP_TotalBlock - 1; + else + bl_num = info->MS_Lib.NumberOfLogBlock * info->MS_Lib.blockSize * 2 - 1; + + info->bl_num = bl_num; + usb_stor_dbg(us, "bl_len = %x\n", bl_len); + usb_stor_dbg(us, "bl_num = %x\n", bl_num); + + /*srb->request_bufflen = 8; */ + buf[0] = (bl_num >> 24) & 0xff; + buf[1] = (bl_num >> 16) & 0xff; + buf[2] = (bl_num >> 8) & 0xff; + buf[3] = (bl_num >> 0) & 0xff; + buf[4] = (bl_len >> 24) & 0xff; + buf[5] = (bl_len >> 16) & 0xff; + buf[6] = (bl_len >> 8) & 0xff; + buf[7] = (bl_len >> 0) & 0xff; + + usb_stor_access_xfer_buf(buf, 8, srb, &sg, &offset, TO_XFER_BUF); + + return USB_STOR_TRANSPORT_GOOD; +} + +static void ms_lib_phy_to_log_range(u16 PhyBlock, u16 *LogStart, u16 *LogEnde) +{ + PhyBlock /= MS_PHYSICAL_BLOCKS_PER_SEGMENT; + + if (PhyBlock) { + *LogStart = MS_LOGICAL_BLOCKS_IN_1ST_SEGMENT + (PhyBlock - 1) * MS_LOGICAL_BLOCKS_PER_SEGMENT;/*496*/ + *LogEnde = *LogStart + MS_LOGICAL_BLOCKS_PER_SEGMENT;/*496*/ + } else { + *LogStart = 0; + *LogEnde = MS_LOGICAL_BLOCKS_IN_1ST_SEGMENT;/*494*/ + } +} + +static int ms_lib_read_extrablock(struct us_data *us, u32 PhyBlock, + u8 PageNum, u8 blen, void *buf) +{ + struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf; + int result; + + /* printk("MS_LibReadExtraBlock --- PhyBlock = %x, + PageNum = %x, blen = %x\n", PhyBlock, PageNum, blen); */ + + /* Read Extra Data */ + memset(bcb, 0, sizeof(struct bulk_cb_wrap)); + bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN); + bcb->DataTransferLength = 0x4 * blen; + bcb->Flags = US_BULK_FLAG_IN; + bcb->CDB[0] = 0xF1; + bcb->CDB[1] = 0x03; + bcb->CDB[5] = (unsigned char)(PageNum); + bcb->CDB[4] = (unsigned char)(PhyBlock); + bcb->CDB[3] = (unsigned char)(PhyBlock>>8); + bcb->CDB[2] = (unsigned char)(PhyBlock>>16); + bcb->CDB[6] = blen; + + result = ene_send_scsi_cmd(us, FDIR_READ, buf, 0); + if (result != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + return USB_STOR_TRANSPORT_GOOD; +} + +static int ms_lib_scan_logicalblocknumber(struct us_data *us, u16 btBlk1st) +{ + u16 PhyBlock, newblk, i; + u16 LogStart, LogEnde; + struct ms_lib_type_extdat extdat; + u8 buf[0x200]; + u32 count = 0, index = 0; + struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra; + + for (PhyBlock = 0; PhyBlock < info->MS_Lib.NumberOfPhyBlock;) { + ms_lib_phy_to_log_range(PhyBlock, &LogStart, &LogEnde); + + for (i = 0; i < MS_PHYSICAL_BLOCKS_PER_SEGMENT; i++, PhyBlock++) { + switch (ms_libconv_to_logical(info, PhyBlock)) { + case MS_STATUS_ERROR: + continue; + default: + break; + } + + if (count == PhyBlock) { + ms_lib_read_extrablock(us, PhyBlock, 0, 0x80, &buf); + count += 0x80; + } + index = (PhyBlock % 0x80) * 4; + + extdat.ovrflg = buf[index]; + extdat.mngflg = buf[index+1]; + extdat.logadr = memstick_logaddr(buf[index+2], buf[index+3]); + + if ((extdat.ovrflg & MS_REG_OVR_BKST) != MS_REG_OVR_BKST_OK) { + ms_lib_setacquired_errorblock(us, PhyBlock); + continue; + } + + if ((extdat.mngflg & MS_REG_MNG_ATFLG) == MS_REG_MNG_ATFLG_ATTBL) { + ms_lib_erase_phyblock(us, PhyBlock); + continue; + } + + if (extdat.logadr != MS_LB_NOT_USED) { + if ((extdat.logadr < LogStart) || (LogEnde <= extdat.logadr)) { + ms_lib_erase_phyblock(us, PhyBlock); + continue; + } + + newblk = ms_libconv_to_physical(info, extdat.logadr); + + if (newblk != MS_LB_NOT_USED) { + if (extdat.logadr == 0) { + ms_lib_set_logicalpair(us, extdat.logadr, PhyBlock); + if (ms_lib_check_disableblock(us, btBlk1st)) { + ms_lib_set_logicalpair(us, extdat.logadr, newblk); + continue; + } + } + + ms_lib_read_extra(us, newblk, 0, &extdat); + if ((extdat.ovrflg & MS_REG_OVR_UDST) == MS_REG_OVR_UDST_UPDATING) { + ms_lib_erase_phyblock(us, PhyBlock); + continue; + } else { + ms_lib_erase_phyblock(us, newblk); + } + } + + ms_lib_set_logicalpair(us, extdat.logadr, PhyBlock); + } + } + } /* End for ... */ + + return MS_STATUS_SUCCESS; +} + + +static int ms_scsi_read(struct us_data *us, struct scsi_cmnd *srb) +{ + int result; + unsigned char *cdb = srb->cmnd; + struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf; + struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra; + + u32 bn = ((cdb[2] << 24) & 0xff000000) | ((cdb[3] << 16) & 0x00ff0000) | + ((cdb[4] << 8) & 0x0000ff00) | ((cdb[5] << 0) & 0x000000ff); + u16 blen = ((cdb[7] << 8) & 0xff00) | ((cdb[8] << 0) & 0x00ff); + u32 blenByte = blen * 0x200; + + if (bn > info->bl_num) + return USB_STOR_TRANSPORT_ERROR; + + if (info->MS_Status.IsMSPro) { + result = ene_load_bincode(us, MSP_RW_PATTERN); + if (result != USB_STOR_XFER_GOOD) { + usb_stor_dbg(us, "Load MPS RW pattern Fail !!\n"); + return USB_STOR_TRANSPORT_ERROR; + } + + /* set up the command wrapper */ + memset(bcb, 0, sizeof(struct bulk_cb_wrap)); + bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN); + bcb->DataTransferLength = blenByte; + bcb->Flags = US_BULK_FLAG_IN; + bcb->CDB[0] = 0xF1; + bcb->CDB[1] = 0x02; + bcb->CDB[5] = (unsigned char)(bn); + bcb->CDB[4] = (unsigned char)(bn>>8); + bcb->CDB[3] = (unsigned char)(bn>>16); + bcb->CDB[2] = (unsigned char)(bn>>24); + + result = ene_send_scsi_cmd(us, FDIR_READ, scsi_sglist(srb), 1); + } else { + void *buf; + int offset = 0; + u16 phyblk, logblk; + u8 PageNum; + u16 len; + u32 blkno; + + buf = kmalloc(blenByte, GFP_KERNEL); + if (buf == NULL) + return USB_STOR_TRANSPORT_ERROR; + + result = ene_load_bincode(us, MS_RW_PATTERN); + if (result != USB_STOR_XFER_GOOD) { + pr_info("Load MS RW pattern Fail !!\n"); + result = USB_STOR_TRANSPORT_ERROR; + goto exit; + } + + logblk = (u16)(bn / info->MS_Lib.PagesPerBlock); + PageNum = (u8)(bn % info->MS_Lib.PagesPerBlock); + + while (1) { + if (blen > (info->MS_Lib.PagesPerBlock-PageNum)) + len = info->MS_Lib.PagesPerBlock-PageNum; + else + len = blen; + + phyblk = ms_libconv_to_physical(info, logblk); + blkno = phyblk * 0x20 + PageNum; + + /* set up the command wrapper */ + memset(bcb, 0, sizeof(struct bulk_cb_wrap)); + bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN); + bcb->DataTransferLength = 0x200 * len; + bcb->Flags = US_BULK_FLAG_IN; + bcb->CDB[0] = 0xF1; + bcb->CDB[1] = 0x02; + bcb->CDB[5] = (unsigned char)(blkno); + bcb->CDB[4] = (unsigned char)(blkno>>8); + bcb->CDB[3] = (unsigned char)(blkno>>16); + bcb->CDB[2] = (unsigned char)(blkno>>24); + + result = ene_send_scsi_cmd(us, FDIR_READ, buf+offset, 0); + if (result != USB_STOR_XFER_GOOD) { + pr_info("MS_SCSI_Read --- result = %x\n", result); + result = USB_STOR_TRANSPORT_ERROR; + goto exit; + } + + blen -= len; + if (blen <= 0) + break; + logblk++; + PageNum = 0; + offset += MS_BYTES_PER_PAGE*len; + } + usb_stor_set_xfer_buf(buf, blenByte, srb); +exit: + kfree(buf); + } + return result; +} + +static int ms_scsi_write(struct us_data *us, struct scsi_cmnd *srb) +{ + int result; + struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf; + unsigned char *cdb = srb->cmnd; + struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra; + + u32 bn = ((cdb[2] << 24) & 0xff000000) | + ((cdb[3] << 16) & 0x00ff0000) | + ((cdb[4] << 8) & 0x0000ff00) | + ((cdb[5] << 0) & 0x000000ff); + u16 blen = ((cdb[7] << 8) & 0xff00) | ((cdb[8] << 0) & 0x00ff); + u32 blenByte = blen * 0x200; + + if (bn > info->bl_num) + return USB_STOR_TRANSPORT_ERROR; + + if (info->MS_Status.IsMSPro) { + result = ene_load_bincode(us, MSP_RW_PATTERN); + if (result != USB_STOR_XFER_GOOD) { + pr_info("Load MSP RW pattern Fail !!\n"); + return USB_STOR_TRANSPORT_ERROR; + } + + /* set up the command wrapper */ + memset(bcb, 0, sizeof(struct bulk_cb_wrap)); + bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN); + bcb->DataTransferLength = blenByte; + bcb->Flags = 0x00; + bcb->CDB[0] = 0xF0; + bcb->CDB[1] = 0x04; + bcb->CDB[5] = (unsigned char)(bn); + bcb->CDB[4] = (unsigned char)(bn>>8); + bcb->CDB[3] = (unsigned char)(bn>>16); + bcb->CDB[2] = (unsigned char)(bn>>24); + + result = ene_send_scsi_cmd(us, FDIR_WRITE, scsi_sglist(srb), 1); + } else { + void *buf; + int offset = 0; + u16 PhyBlockAddr; + u8 PageNum; + u16 len, oldphy, newphy; + + buf = kmalloc(blenByte, GFP_KERNEL); + if (buf == NULL) + return USB_STOR_TRANSPORT_ERROR; + usb_stor_set_xfer_buf(buf, blenByte, srb); + + result = ene_load_bincode(us, MS_RW_PATTERN); + if (result != USB_STOR_XFER_GOOD) { + pr_info("Load MS RW pattern Fail !!\n"); + result = USB_STOR_TRANSPORT_ERROR; + goto exit; + } + + PhyBlockAddr = (u16)(bn / info->MS_Lib.PagesPerBlock); + PageNum = (u8)(bn % info->MS_Lib.PagesPerBlock); + + while (1) { + if (blen > (info->MS_Lib.PagesPerBlock-PageNum)) + len = info->MS_Lib.PagesPerBlock-PageNum; + else + len = blen; + + oldphy = ms_libconv_to_physical(info, PhyBlockAddr); /* need check us <-> info */ + newphy = ms_libsearch_block_from_logical(us, PhyBlockAddr); + + result = ms_read_copyblock(us, oldphy, newphy, PhyBlockAddr, PageNum, buf+offset, len); + + if (result != USB_STOR_XFER_GOOD) { + pr_info("MS_SCSI_Write --- result = %x\n", result); + result = USB_STOR_TRANSPORT_ERROR; + goto exit; + } + + info->MS_Lib.Phy2LogMap[oldphy] = MS_LB_NOT_USED_ERASED; + ms_lib_force_setlogical_pair(us, PhyBlockAddr, newphy); + + blen -= len; + if (blen <= 0) + break; + PhyBlockAddr++; + PageNum = 0; + offset += MS_BYTES_PER_PAGE*len; + } +exit: + kfree(buf); + } + return result; +} + +/* + * ENE MS Card + */ + +static int ene_get_card_type(struct us_data *us, u16 index, void *buf) +{ + struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf; + int result; + + memset(bcb, 0, sizeof(struct bulk_cb_wrap)); + bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN); + bcb->DataTransferLength = 0x01; + bcb->Flags = US_BULK_FLAG_IN; + bcb->CDB[0] = 0xED; + bcb->CDB[2] = (unsigned char)(index>>8); + bcb->CDB[3] = (unsigned char)index; + + result = ene_send_scsi_cmd(us, FDIR_READ, buf, 0); + return result; +} + +static int ene_get_card_status(struct us_data *us, u8 *buf) +{ + u16 tmpreg; + u32 reg4b; + struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra; + + /*usb_stor_dbg(us, "transport --- ENE_ReadSDReg\n");*/ + reg4b = *(u32 *)&buf[0x18]; + info->SD_READ_BL_LEN = (u8)((reg4b >> 8) & 0x0f); + + tmpreg = (u16) reg4b; + reg4b = *(u32 *)(&buf[0x14]); + if (info->SD_Status.HiCapacity && !info->SD_Status.IsMMC) + info->HC_C_SIZE = (reg4b >> 8) & 0x3fffff; + + info->SD_C_SIZE = ((tmpreg & 0x03) << 10) | (u16)(reg4b >> 22); + info->SD_C_SIZE_MULT = (u8)(reg4b >> 7) & 0x07; + if (info->SD_Status.HiCapacity && info->SD_Status.IsMMC) + info->HC_C_SIZE = *(u32 *)(&buf[0x100]); + + if (info->SD_READ_BL_LEN > SD_BLOCK_LEN) { + info->SD_Block_Mult = 1 << (info->SD_READ_BL_LEN-SD_BLOCK_LEN); + info->SD_READ_BL_LEN = SD_BLOCK_LEN; + } else { + info->SD_Block_Mult = 1; + } + + return USB_STOR_TRANSPORT_GOOD; +} + +static int ene_load_bincode(struct us_data *us, unsigned char flag) +{ + int err; + char *fw_name = NULL; + unsigned char *buf = NULL; + const struct firmware *sd_fw = NULL; + int result = USB_STOR_TRANSPORT_ERROR; + struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf; + struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra; + + if (info->BIN_FLAG == flag) + return USB_STOR_TRANSPORT_GOOD; + + switch (flag) { + /* For SD */ + case SD_INIT1_PATTERN: + usb_stor_dbg(us, "SD_INIT1_PATTERN\n"); + fw_name = SD_INIT1_FIRMWARE; + break; + case SD_INIT2_PATTERN: + usb_stor_dbg(us, "SD_INIT2_PATTERN\n"); + fw_name = SD_INIT2_FIRMWARE; + break; + case SD_RW_PATTERN: + usb_stor_dbg(us, "SD_RW_PATTERN\n"); + fw_name = SD_RW_FIRMWARE; + break; + /* For MS */ + case MS_INIT_PATTERN: + usb_stor_dbg(us, "MS_INIT_PATTERN\n"); + fw_name = MS_INIT_FIRMWARE; + break; + case MSP_RW_PATTERN: + usb_stor_dbg(us, "MSP_RW_PATTERN\n"); + fw_name = MSP_RW_FIRMWARE; + break; + case MS_RW_PATTERN: + usb_stor_dbg(us, "MS_RW_PATTERN\n"); + fw_name = MS_RW_FIRMWARE; + break; + default: + usb_stor_dbg(us, "----------- Unknown PATTERN ----------\n"); + goto nofw; + } + + err = request_firmware(&sd_fw, fw_name, &us->pusb_dev->dev); + if (err) { + usb_stor_dbg(us, "load firmware %s failed\n", fw_name); + goto nofw; + } + buf = kmemdup(sd_fw->data, sd_fw->size, GFP_KERNEL); + if (buf == NULL) + goto nofw; + + memset(bcb, 0, sizeof(struct bulk_cb_wrap)); + bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN); + bcb->DataTransferLength = sd_fw->size; + bcb->Flags = 0x00; + bcb->CDB[0] = 0xEF; + + result = ene_send_scsi_cmd(us, FDIR_WRITE, buf, 0); + info->BIN_FLAG = flag; + kfree(buf); + +nofw: + release_firmware(sd_fw); + return result; +} + +static int ms_card_init(struct us_data *us) +{ + u32 result; + u16 TmpBlock; + unsigned char *PageBuffer0 = NULL, *PageBuffer1 = NULL; + struct ms_lib_type_extdat extdat; + u16 btBlk1st, btBlk2nd; + u32 btBlk1stErred; + struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra; + + printk(KERN_INFO "MS_CardInit start\n"); + + ms_lib_free_allocatedarea(us); /* Clean buffer and set struct us_data flag to 0 */ + + /* get two PageBuffer */ + PageBuffer0 = kmalloc(MS_BYTES_PER_PAGE, GFP_KERNEL); + PageBuffer1 = kmalloc(MS_BYTES_PER_PAGE, GFP_KERNEL); + if ((PageBuffer0 == NULL) || (PageBuffer1 == NULL)) { + result = MS_NO_MEMORY_ERROR; + goto exit; + } + + btBlk1st = btBlk2nd = MS_LB_NOT_USED; + btBlk1stErred = 0; + + for (TmpBlock = 0; TmpBlock < MS_MAX_INITIAL_ERROR_BLOCKS+2; TmpBlock++) { + + switch (ms_read_readpage(us, TmpBlock, 0, (u32 *)PageBuffer0, &extdat)) { + case MS_STATUS_SUCCESS: + break; + case MS_STATUS_INT_ERROR: + break; + case MS_STATUS_ERROR: + default: + continue; + } + + if ((extdat.ovrflg & MS_REG_OVR_BKST) == MS_REG_OVR_BKST_NG) + continue; + + if (((extdat.mngflg & MS_REG_MNG_SYSFLG) == MS_REG_MNG_SYSFLG_USER) || + (be16_to_cpu(((struct ms_bootblock_page0 *)PageBuffer0)->header.wBlockID) != MS_BOOT_BLOCK_ID) || + (be16_to_cpu(((struct ms_bootblock_page0 *)PageBuffer0)->header.wFormatVersion) != MS_BOOT_BLOCK_FORMAT_VERSION) || + (((struct ms_bootblock_page0 *)PageBuffer0)->header.bNumberOfDataEntry != MS_BOOT_BLOCK_DATA_ENTRIES)) + continue; + + if (btBlk1st != MS_LB_NOT_USED) { + btBlk2nd = TmpBlock; + break; + } + + btBlk1st = TmpBlock; + memcpy(PageBuffer1, PageBuffer0, MS_BYTES_PER_PAGE); + if (extdat.status1 & (MS_REG_ST1_DTER | MS_REG_ST1_EXER | MS_REG_ST1_FGER)) + btBlk1stErred = 1; + } + + if (btBlk1st == MS_LB_NOT_USED) { + result = MS_STATUS_ERROR; + goto exit; + } + + /* write protect */ + if ((extdat.status0 & MS_REG_ST0_WP) == MS_REG_ST0_WP_ON) + ms_lib_ctrl_set(info, MS_LIB_CTRL_WRPROTECT); + + result = MS_STATUS_ERROR; + /* 1st Boot Block */ + if (btBlk1stErred == 0) + result = ms_lib_process_bootblock(us, btBlk1st, PageBuffer1); + /* 1st */ + /* 2nd Boot Block */ + if (result && (btBlk2nd != MS_LB_NOT_USED)) + result = ms_lib_process_bootblock(us, btBlk2nd, PageBuffer0); + + if (result) { + result = MS_STATUS_ERROR; + goto exit; + } + + for (TmpBlock = 0; TmpBlock < btBlk1st; TmpBlock++) + info->MS_Lib.Phy2LogMap[TmpBlock] = MS_LB_INITIAL_ERROR; + + info->MS_Lib.Phy2LogMap[btBlk1st] = MS_LB_BOOT_BLOCK; + + if (btBlk2nd != MS_LB_NOT_USED) { + for (TmpBlock = btBlk1st + 1; TmpBlock < btBlk2nd; TmpBlock++) + info->MS_Lib.Phy2LogMap[TmpBlock] = MS_LB_INITIAL_ERROR; + + info->MS_Lib.Phy2LogMap[btBlk2nd] = MS_LB_BOOT_BLOCK; + } + + result = ms_lib_scan_logicalblocknumber(us, btBlk1st); + if (result) + goto exit; + + for (TmpBlock = MS_PHYSICAL_BLOCKS_PER_SEGMENT; + TmpBlock < info->MS_Lib.NumberOfPhyBlock; + TmpBlock += MS_PHYSICAL_BLOCKS_PER_SEGMENT) { + if (ms_count_freeblock(us, TmpBlock) == 0) { + ms_lib_ctrl_set(info, MS_LIB_CTRL_WRPROTECT); + break; + } + } + + /* write */ + if (ms_lib_alloc_writebuf(us)) { + result = MS_NO_MEMORY_ERROR; + goto exit; + } + + result = MS_STATUS_SUCCESS; + +exit: + kfree(PageBuffer1); + kfree(PageBuffer0); + + printk(KERN_INFO "MS_CardInit end\n"); + return result; +} + +static int ene_ms_init(struct us_data *us) +{ + struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf; + int result; + u8 buf[0x200]; + u16 MSP_BlockSize, MSP_UserAreaBlocks; + struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra; + + printk(KERN_INFO "transport --- ENE_MSInit\n"); + + /* the same part to test ENE */ + + result = ene_load_bincode(us, MS_INIT_PATTERN); + if (result != USB_STOR_XFER_GOOD) { + printk(KERN_ERR "Load MS Init Code Fail !!\n"); + return USB_STOR_TRANSPORT_ERROR; + } + + memset(bcb, 0, sizeof(struct bulk_cb_wrap)); + bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN); + bcb->DataTransferLength = 0x200; + bcb->Flags = US_BULK_FLAG_IN; + bcb->CDB[0] = 0xF1; + bcb->CDB[1] = 0x01; + + result = ene_send_scsi_cmd(us, FDIR_READ, &buf, 0); + if (result != USB_STOR_XFER_GOOD) { + printk(KERN_ERR "Execution MS Init Code Fail !!\n"); + return USB_STOR_TRANSPORT_ERROR; + } + /* the same part to test ENE */ + info->MS_Status = *(struct MS_STATUS *)&buf[0]; + + if (info->MS_Status.Insert && info->MS_Status.Ready) { + printk(KERN_INFO "Insert = %x\n", info->MS_Status.Insert); + printk(KERN_INFO "Ready = %x\n", info->MS_Status.Ready); + printk(KERN_INFO "IsMSPro = %x\n", info->MS_Status.IsMSPro); + printk(KERN_INFO "IsMSPHG = %x\n", info->MS_Status.IsMSPHG); + printk(KERN_INFO "WtP= %x\n", info->MS_Status.WtP); + if (info->MS_Status.IsMSPro) { + MSP_BlockSize = (buf[6] << 8) | buf[7]; + MSP_UserAreaBlocks = (buf[10] << 8) | buf[11]; + info->MSP_TotalBlock = MSP_BlockSize * MSP_UserAreaBlocks; + } else { + ms_card_init(us); /* Card is MS (to ms.c)*/ + } + usb_stor_dbg(us, "MS Init Code OK !!\n"); + } else { + usb_stor_dbg(us, "MS Card Not Ready --- %x\n", buf[0]); + return USB_STOR_TRANSPORT_ERROR; + } + + return USB_STOR_TRANSPORT_GOOD; +} + +static int ene_sd_init(struct us_data *us) +{ + int result; + u8 buf[0x200]; + struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf; + struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra; + + usb_stor_dbg(us, "transport --- ENE_SDInit\n"); + /* SD Init Part-1 */ + result = ene_load_bincode(us, SD_INIT1_PATTERN); + if (result != USB_STOR_XFER_GOOD) { + usb_stor_dbg(us, "Load SD Init Code Part-1 Fail !!\n"); + return USB_STOR_TRANSPORT_ERROR; + } + + memset(bcb, 0, sizeof(struct bulk_cb_wrap)); + bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN); + bcb->Flags = US_BULK_FLAG_IN; + bcb->CDB[0] = 0xF2; + + result = ene_send_scsi_cmd(us, FDIR_READ, NULL, 0); + if (result != USB_STOR_XFER_GOOD) { + usb_stor_dbg(us, "Execution SD Init Code Fail !!\n"); + return USB_STOR_TRANSPORT_ERROR; + } + + /* SD Init Part-2 */ + result = ene_load_bincode(us, SD_INIT2_PATTERN); + if (result != USB_STOR_XFER_GOOD) { + usb_stor_dbg(us, "Load SD Init Code Part-2 Fail !!\n"); + return USB_STOR_TRANSPORT_ERROR; + } + + memset(bcb, 0, sizeof(struct bulk_cb_wrap)); + bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN); + bcb->DataTransferLength = 0x200; + bcb->Flags = US_BULK_FLAG_IN; + bcb->CDB[0] = 0xF1; + + result = ene_send_scsi_cmd(us, FDIR_READ, &buf, 0); + if (result != USB_STOR_XFER_GOOD) { + usb_stor_dbg(us, "Execution SD Init Code Fail !!\n"); + return USB_STOR_TRANSPORT_ERROR; + } + + info->SD_Status = *(struct SD_STATUS *)&buf[0]; + if (info->SD_Status.Insert && info->SD_Status.Ready) { + struct SD_STATUS *s = &info->SD_Status; + + ene_get_card_status(us, (unsigned char *)&buf); + usb_stor_dbg(us, "Insert = %x\n", s->Insert); + usb_stor_dbg(us, "Ready = %x\n", s->Ready); + usb_stor_dbg(us, "IsMMC = %x\n", s->IsMMC); + usb_stor_dbg(us, "HiCapacity = %x\n", s->HiCapacity); + usb_stor_dbg(us, "HiSpeed = %x\n", s->HiSpeed); + usb_stor_dbg(us, "WtP = %x\n", s->WtP); + } else { + usb_stor_dbg(us, "SD Card Not Ready --- %x\n", buf[0]); + return USB_STOR_TRANSPORT_ERROR; + } + return USB_STOR_TRANSPORT_GOOD; +} + + +static int ene_init(struct us_data *us) +{ + int result; + u8 misc_reg03 = 0; + struct ene_ub6250_info *info = (struct ene_ub6250_info *)(us->extra); + + result = ene_get_card_type(us, REG_CARD_STATUS, &misc_reg03); + if (result != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + if (misc_reg03 & 0x01) { + if (!info->SD_Status.Ready) { + result = ene_sd_init(us); + if (result != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + } + } + if (misc_reg03 & 0x02) { + if (!info->MS_Status.Ready) { + result = ene_ms_init(us); + if (result != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + } + } + return result; +} + +/*----- sd_scsi_irp() ---------*/ +static int sd_scsi_irp(struct us_data *us, struct scsi_cmnd *srb) +{ + int result; + struct ene_ub6250_info *info = (struct ene_ub6250_info *)us->extra; + + info->SrbStatus = SS_SUCCESS; + switch (srb->cmnd[0]) { + case TEST_UNIT_READY: + result = sd_scsi_test_unit_ready(us, srb); + break; /* 0x00 */ + case INQUIRY: + result = sd_scsi_inquiry(us, srb); + break; /* 0x12 */ + case MODE_SENSE: + result = sd_scsi_mode_sense(us, srb); + break; /* 0x1A */ + /* + case START_STOP: + result = SD_SCSI_Start_Stop(us, srb); + break; //0x1B + */ + case READ_CAPACITY: + result = sd_scsi_read_capacity(us, srb); + break; /* 0x25 */ + case READ_10: + result = sd_scsi_read(us, srb); + break; /* 0x28 */ + case WRITE_10: + result = sd_scsi_write(us, srb); + break; /* 0x2A */ + default: + info->SrbStatus = SS_ILLEGAL_REQUEST; + result = USB_STOR_TRANSPORT_FAILED; + break; + } + return result; +} + +/* + * ms_scsi_irp() + */ +static int ms_scsi_irp(struct us_data *us, struct scsi_cmnd *srb) +{ + int result; + struct ene_ub6250_info *info = (struct ene_ub6250_info *)us->extra; + info->SrbStatus = SS_SUCCESS; + switch (srb->cmnd[0]) { + case TEST_UNIT_READY: + result = ms_scsi_test_unit_ready(us, srb); + break; /* 0x00 */ + case INQUIRY: + result = ms_scsi_inquiry(us, srb); + break; /* 0x12 */ + case MODE_SENSE: + result = ms_scsi_mode_sense(us, srb); + break; /* 0x1A */ + case READ_CAPACITY: + result = ms_scsi_read_capacity(us, srb); + break; /* 0x25 */ + case READ_10: + result = ms_scsi_read(us, srb); + break; /* 0x28 */ + case WRITE_10: + result = ms_scsi_write(us, srb); + break; /* 0x2A */ + default: + info->SrbStatus = SS_ILLEGAL_REQUEST; + result = USB_STOR_TRANSPORT_FAILED; + break; + } + return result; +} + +static int ene_transport(struct scsi_cmnd *srb, struct us_data *us) +{ + int result = 0; + struct ene_ub6250_info *info = (struct ene_ub6250_info *)(us->extra); + + /*US_DEBUG(usb_stor_show_command(us, srb)); */ + scsi_set_resid(srb, 0); + if (unlikely(!(info->SD_Status.Ready || info->MS_Status.Ready))) { + result = ene_init(us); + } else { + if (info->SD_Status.Ready) + result = sd_scsi_irp(us, srb); + + if (info->MS_Status.Ready) + result = ms_scsi_irp(us, srb); + } + return 0; +} + + +static int ene_ub6250_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + int result; + u8 misc_reg03 = 0; + struct us_data *us; + + result = usb_stor_probe1(&us, intf, id, + (id - ene_ub6250_usb_ids) + ene_ub6250_unusual_dev_list); + if (result) + return result; + + /* FIXME: where should the code alloc extra buf ? */ + if (!us->extra) { + us->extra = kzalloc(sizeof(struct ene_ub6250_info), GFP_KERNEL); + if (!us->extra) + return -ENOMEM; + us->extra_destructor = ene_ub6250_info_destructor; + } + + us->transport_name = "ene_ub6250"; + us->transport = ene_transport; + us->max_lun = 0; + + result = usb_stor_probe2(us); + if (result) + return result; + + /* probe card type */ + result = ene_get_card_type(us, REG_CARD_STATUS, &misc_reg03); + if (result != USB_STOR_XFER_GOOD) { + usb_stor_disconnect(intf); + return USB_STOR_TRANSPORT_ERROR; + } + + if (!(misc_reg03 & 0x01)) { + pr_info("ums_eneub6250: This driver only supports SD/MS cards. " + "It does not support SM cards.\n"); + } + + return result; +} + + +#ifdef CONFIG_PM + +static int ene_ub6250_resume(struct usb_interface *iface) +{ + u8 tmp = 0; + struct us_data *us = usb_get_intfdata(iface); + struct ene_ub6250_info *info = (struct ene_ub6250_info *)(us->extra); + + mutex_lock(&us->dev_mutex); + + if (us->suspend_resume_hook) + (us->suspend_resume_hook)(us, US_RESUME); + + mutex_unlock(&us->dev_mutex); + + info->Power_IsResum = true; + /*info->SD_Status.Ready = 0; */ + info->SD_Status = *(struct SD_STATUS *)&tmp; + info->MS_Status = *(struct MS_STATUS *)&tmp; + info->SM_Status = *(struct SM_STATUS *)&tmp; + + return 0; +} + +static int ene_ub6250_reset_resume(struct usb_interface *iface) +{ + u8 tmp = 0; + struct us_data *us = usb_get_intfdata(iface); + struct ene_ub6250_info *info = (struct ene_ub6250_info *)(us->extra); + + /* Report the reset to the SCSI core */ + usb_stor_reset_resume(iface); + + /* FIXME: Notify the subdrivers that they need to reinitialize + * the device */ + info->Power_IsResum = true; + /*info->SD_Status.Ready = 0; */ + info->SD_Status = *(struct SD_STATUS *)&tmp; + info->MS_Status = *(struct MS_STATUS *)&tmp; + info->SM_Status = *(struct SM_STATUS *)&tmp; + + return 0; +} + +#else + +#define ene_ub6250_resume NULL +#define ene_ub6250_reset_resume NULL + +#endif + +static struct usb_driver ene_ub6250_driver = { + .name = "ums_eneub6250", + .probe = ene_ub6250_probe, + .disconnect = usb_stor_disconnect, + .suspend = usb_stor_suspend, + .resume = ene_ub6250_resume, + .reset_resume = ene_ub6250_reset_resume, + .pre_reset = usb_stor_pre_reset, + .post_reset = usb_stor_post_reset, + .id_table = ene_ub6250_usb_ids, + .soft_unbind = 1, + .no_dynamic_id = 1, +}; + +module_usb_driver(ene_ub6250_driver); diff --git a/kernel/drivers/usb/storage/freecom.c b/kernel/drivers/usb/storage/freecom.c new file mode 100644 index 000000000..ef16068b7 --- /dev/null +++ b/kernel/drivers/usb/storage/freecom.c @@ -0,0 +1,560 @@ +/* Driver for Freecom USB/IDE adaptor + * + * Freecom v0.1: + * + * First release + * + * Current development and maintenance by: + * (C) 2000 David Brown <usb-storage@davidb.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + * This driver was developed with information provided in FREECOM's USB + * Programmers Reference Guide. For further information contact Freecom + * (http://www.freecom.de/) + */ + +#include <linux/module.h> +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> + +#include "usb.h" +#include "transport.h" +#include "protocol.h" +#include "debug.h" + +MODULE_DESCRIPTION("Driver for Freecom USB/IDE adaptor"); +MODULE_AUTHOR("David Brown <usb-storage@davidb.org>"); +MODULE_LICENSE("GPL"); + +#ifdef CONFIG_USB_STORAGE_DEBUG +static void pdump(struct us_data *us, void *ibuffer, int length); +#endif + +/* Bits of HD_STATUS */ +#define ERR_STAT 0x01 +#define DRQ_STAT 0x08 + +/* All of the outgoing packets are 64 bytes long. */ +struct freecom_cb_wrap { + u8 Type; /* Command type. */ + u8 Timeout; /* Timeout in seconds. */ + u8 Atapi[12]; /* An ATAPI packet. */ + u8 Filler[50]; /* Padding Data. */ +}; + +struct freecom_xfer_wrap { + u8 Type; /* Command type. */ + u8 Timeout; /* Timeout in seconds. */ + __le32 Count; /* Number of bytes to transfer. */ + u8 Pad[58]; +} __attribute__ ((packed)); + +struct freecom_ide_out { + u8 Type; /* Type + IDE register. */ + u8 Pad; + __le16 Value; /* Value to write. */ + u8 Pad2[60]; +}; + +struct freecom_ide_in { + u8 Type; /* Type | IDE register. */ + u8 Pad[63]; +}; + +struct freecom_status { + u8 Status; + u8 Reason; + __le16 Count; + u8 Pad[60]; +}; + +/* Freecom stuffs the interrupt status in the INDEX_STAT bit of the ide + * register. */ +#define FCM_INT_STATUS 0x02 /* INDEX_STAT */ +#define FCM_STATUS_BUSY 0x80 + +/* These are the packet types. The low bit indicates that this command + * should wait for an interrupt. */ +#define FCM_PACKET_ATAPI 0x21 +#define FCM_PACKET_STATUS 0x20 + +/* Receive data from the IDE interface. The ATAPI packet has already + * waited, so the data should be immediately available. */ +#define FCM_PACKET_INPUT 0x81 + +/* Send data to the IDE interface. */ +#define FCM_PACKET_OUTPUT 0x01 + +/* Write a value to an ide register. Or the ide register to write after + * munging the address a bit. */ +#define FCM_PACKET_IDE_WRITE 0x40 +#define FCM_PACKET_IDE_READ 0xC0 + +/* All packets (except for status) are 64 bytes long. */ +#define FCM_PACKET_LENGTH 64 +#define FCM_STATUS_PACKET_LENGTH 4 + +static int init_freecom(struct us_data *us); + + +/* + * The table of devices + */ +#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ + vendorName, productName, useProtocol, useTransport, \ + initFunction, flags) \ +{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ + .driver_info = (flags) } + +static struct usb_device_id freecom_usb_ids[] = { +# include "unusual_freecom.h" + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, freecom_usb_ids); + +#undef UNUSUAL_DEV + +/* + * The flags table + */ +#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \ + vendor_name, product_name, use_protocol, use_transport, \ + init_function, Flags) \ +{ \ + .vendorName = vendor_name, \ + .productName = product_name, \ + .useProtocol = use_protocol, \ + .useTransport = use_transport, \ + .initFunction = init_function, \ +} + +static struct us_unusual_dev freecom_unusual_dev_list[] = { +# include "unusual_freecom.h" + { } /* Terminating entry */ +}; + +#undef UNUSUAL_DEV + +static int +freecom_readdata (struct scsi_cmnd *srb, struct us_data *us, + unsigned int ipipe, unsigned int opipe, int count) +{ + struct freecom_xfer_wrap *fxfr = + (struct freecom_xfer_wrap *) us->iobuf; + int result; + + fxfr->Type = FCM_PACKET_INPUT | 0x00; + fxfr->Timeout = 0; /* Short timeout for debugging. */ + fxfr->Count = cpu_to_le32 (count); + memset (fxfr->Pad, 0, sizeof (fxfr->Pad)); + + usb_stor_dbg(us, "Read data Freecom! (c=%d)\n", count); + + /* Issue the transfer command. */ + result = usb_stor_bulk_transfer_buf (us, opipe, fxfr, + FCM_PACKET_LENGTH, NULL); + if (result != USB_STOR_XFER_GOOD) { + usb_stor_dbg(us, "Freecom readdata transport error\n"); + return USB_STOR_TRANSPORT_ERROR; + } + + /* Now transfer all of our blocks. */ + usb_stor_dbg(us, "Start of read\n"); + result = usb_stor_bulk_srb(us, ipipe, srb); + usb_stor_dbg(us, "freecom_readdata done!\n"); + + if (result > USB_STOR_XFER_SHORT) + return USB_STOR_TRANSPORT_ERROR; + return USB_STOR_TRANSPORT_GOOD; +} + +static int +freecom_writedata (struct scsi_cmnd *srb, struct us_data *us, + int unsigned ipipe, unsigned int opipe, int count) +{ + struct freecom_xfer_wrap *fxfr = + (struct freecom_xfer_wrap *) us->iobuf; + int result; + + fxfr->Type = FCM_PACKET_OUTPUT | 0x00; + fxfr->Timeout = 0; /* Short timeout for debugging. */ + fxfr->Count = cpu_to_le32 (count); + memset (fxfr->Pad, 0, sizeof (fxfr->Pad)); + + usb_stor_dbg(us, "Write data Freecom! (c=%d)\n", count); + + /* Issue the transfer command. */ + result = usb_stor_bulk_transfer_buf (us, opipe, fxfr, + FCM_PACKET_LENGTH, NULL); + if (result != USB_STOR_XFER_GOOD) { + usb_stor_dbg(us, "Freecom writedata transport error\n"); + return USB_STOR_TRANSPORT_ERROR; + } + + /* Now transfer all of our blocks. */ + usb_stor_dbg(us, "Start of write\n"); + result = usb_stor_bulk_srb(us, opipe, srb); + + usb_stor_dbg(us, "freecom_writedata done!\n"); + if (result > USB_STOR_XFER_SHORT) + return USB_STOR_TRANSPORT_ERROR; + return USB_STOR_TRANSPORT_GOOD; +} + +/* + * Transport for the Freecom USB/IDE adaptor. + * + */ +static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us) +{ + struct freecom_cb_wrap *fcb; + struct freecom_status *fst; + unsigned int ipipe, opipe; /* We need both pipes. */ + int result; + unsigned int partial; + int length; + + fcb = (struct freecom_cb_wrap *) us->iobuf; + fst = (struct freecom_status *) us->iobuf; + + usb_stor_dbg(us, "Freecom TRANSPORT STARTED\n"); + + /* Get handles for both transports. */ + opipe = us->send_bulk_pipe; + ipipe = us->recv_bulk_pipe; + + /* The ATAPI Command always goes out first. */ + fcb->Type = FCM_PACKET_ATAPI | 0x00; + fcb->Timeout = 0; + memcpy (fcb->Atapi, srb->cmnd, 12); + memset (fcb->Filler, 0, sizeof (fcb->Filler)); + + US_DEBUG(pdump(us, srb->cmnd, 12)); + + /* Send it out. */ + result = usb_stor_bulk_transfer_buf (us, opipe, fcb, + FCM_PACKET_LENGTH, NULL); + + /* The Freecom device will only fail if there is something wrong in + * USB land. It returns the status in its own registers, which + * come back in the bulk pipe. */ + if (result != USB_STOR_XFER_GOOD) { + usb_stor_dbg(us, "freecom transport error\n"); + return USB_STOR_TRANSPORT_ERROR; + } + + /* There are times we can optimize out this status read, but it + * doesn't hurt us to always do it now. */ + result = usb_stor_bulk_transfer_buf (us, ipipe, fst, + FCM_STATUS_PACKET_LENGTH, &partial); + usb_stor_dbg(us, "foo Status result %d %u\n", result, partial); + if (result != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + US_DEBUG(pdump(us, (void *)fst, partial)); + + /* The firmware will time-out commands after 20 seconds. Some commands + * can legitimately take longer than this, so we use a different + * command that only waits for the interrupt and then sends status, + * without having to send a new ATAPI command to the device. + * + * NOTE: There is some indication that a data transfer after a timeout + * may not work, but that is a condition that should never happen. + */ + while (fst->Status & FCM_STATUS_BUSY) { + usb_stor_dbg(us, "20 second USB/ATAPI bridge TIMEOUT occurred!\n"); + usb_stor_dbg(us, "fst->Status is %x\n", fst->Status); + + /* Get the status again */ + fcb->Type = FCM_PACKET_STATUS; + fcb->Timeout = 0; + memset (fcb->Atapi, 0, sizeof(fcb->Atapi)); + memset (fcb->Filler, 0, sizeof (fcb->Filler)); + + /* Send it out. */ + result = usb_stor_bulk_transfer_buf (us, opipe, fcb, + FCM_PACKET_LENGTH, NULL); + + /* The Freecom device will only fail if there is something + * wrong in USB land. It returns the status in its own + * registers, which come back in the bulk pipe. + */ + if (result != USB_STOR_XFER_GOOD) { + usb_stor_dbg(us, "freecom transport error\n"); + return USB_STOR_TRANSPORT_ERROR; + } + + /* get the data */ + result = usb_stor_bulk_transfer_buf (us, ipipe, fst, + FCM_STATUS_PACKET_LENGTH, &partial); + + usb_stor_dbg(us, "bar Status result %d %u\n", result, partial); + if (result != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + US_DEBUG(pdump(us, (void *)fst, partial)); + } + + if (partial != 4) + return USB_STOR_TRANSPORT_ERROR; + if ((fst->Status & 1) != 0) { + usb_stor_dbg(us, "operation failed\n"); + return USB_STOR_TRANSPORT_FAILED; + } + + /* The device might not have as much data available as we + * requested. If you ask for more than the device has, this reads + * and such will hang. */ + usb_stor_dbg(us, "Device indicates that it has %d bytes available\n", + le16_to_cpu(fst->Count)); + usb_stor_dbg(us, "SCSI requested %d\n", scsi_bufflen(srb)); + + /* Find the length we desire to read. */ + switch (srb->cmnd[0]) { + case INQUIRY: + case REQUEST_SENSE: /* 16 or 18 bytes? spec says 18, lots of devices only have 16 */ + case MODE_SENSE: + case MODE_SENSE_10: + length = le16_to_cpu(fst->Count); + break; + default: + length = scsi_bufflen(srb); + } + + /* verify that this amount is legal */ + if (length > scsi_bufflen(srb)) { + length = scsi_bufflen(srb); + usb_stor_dbg(us, "Truncating request to match buffer length: %d\n", + length); + } + + /* What we do now depends on what direction the data is supposed to + * move in. */ + + switch (us->srb->sc_data_direction) { + case DMA_FROM_DEVICE: + /* catch bogus "read 0 length" case */ + if (!length) + break; + /* Make sure that the status indicates that the device + * wants data as well. */ + if ((fst->Status & DRQ_STAT) == 0 || (fst->Reason & 3) != 2) { + usb_stor_dbg(us, "SCSI wants data, drive doesn't have any\n"); + return USB_STOR_TRANSPORT_FAILED; + } + result = freecom_readdata (srb, us, ipipe, opipe, length); + if (result != USB_STOR_TRANSPORT_GOOD) + return result; + + usb_stor_dbg(us, "Waiting for status\n"); + result = usb_stor_bulk_transfer_buf (us, ipipe, fst, + FCM_PACKET_LENGTH, &partial); + US_DEBUG(pdump(us, (void *)fst, partial)); + + if (partial != 4 || result > USB_STOR_XFER_SHORT) + return USB_STOR_TRANSPORT_ERROR; + if ((fst->Status & ERR_STAT) != 0) { + usb_stor_dbg(us, "operation failed\n"); + return USB_STOR_TRANSPORT_FAILED; + } + if ((fst->Reason & 3) != 3) { + usb_stor_dbg(us, "Drive seems still hungry\n"); + return USB_STOR_TRANSPORT_FAILED; + } + usb_stor_dbg(us, "Transfer happy\n"); + break; + + case DMA_TO_DEVICE: + /* catch bogus "write 0 length" case */ + if (!length) + break; + /* Make sure the status indicates that the device wants to + * send us data. */ + /* !!IMPLEMENT!! */ + result = freecom_writedata (srb, us, ipipe, opipe, length); + if (result != USB_STOR_TRANSPORT_GOOD) + return result; + + usb_stor_dbg(us, "Waiting for status\n"); + result = usb_stor_bulk_transfer_buf (us, ipipe, fst, + FCM_PACKET_LENGTH, &partial); + + if (partial != 4 || result > USB_STOR_XFER_SHORT) + return USB_STOR_TRANSPORT_ERROR; + if ((fst->Status & ERR_STAT) != 0) { + usb_stor_dbg(us, "operation failed\n"); + return USB_STOR_TRANSPORT_FAILED; + } + if ((fst->Reason & 3) != 3) { + usb_stor_dbg(us, "Drive seems still hungry\n"); + return USB_STOR_TRANSPORT_FAILED; + } + + usb_stor_dbg(us, "Transfer happy\n"); + break; + + + case DMA_NONE: + /* Easy, do nothing. */ + break; + + default: + /* should never hit here -- filtered in usb.c */ + usb_stor_dbg(us, "freecom unimplemented direction: %d\n", + us->srb->sc_data_direction); + /* Return fail, SCSI seems to handle this better. */ + return USB_STOR_TRANSPORT_FAILED; + break; + } + + return USB_STOR_TRANSPORT_GOOD; +} + +static int init_freecom(struct us_data *us) +{ + int result; + char *buffer = us->iobuf; + + /* The DMA-mapped I/O buffer is 64 bytes long, just right for + * all our packets. No need to allocate any extra buffer space. + */ + + result = usb_stor_control_msg(us, us->recv_ctrl_pipe, + 0x4c, 0xc0, 0x4346, 0x0, buffer, 0x20, 3*HZ); + buffer[32] = '\0'; + usb_stor_dbg(us, "String returned from FC init is: %s\n", buffer); + + /* Special thanks to the people at Freecom for providing me with + * this "magic sequence", which they use in their Windows and MacOS + * drivers to make sure that all the attached perhiperals are + * properly reset. + */ + + /* send reset */ + result = usb_stor_control_msg(us, us->send_ctrl_pipe, + 0x4d, 0x40, 0x24d8, 0x0, NULL, 0x0, 3*HZ); + usb_stor_dbg(us, "result from activate reset is %d\n", result); + + /* wait 250ms */ + mdelay(250); + + /* clear reset */ + result = usb_stor_control_msg(us, us->send_ctrl_pipe, + 0x4d, 0x40, 0x24f8, 0x0, NULL, 0x0, 3*HZ); + usb_stor_dbg(us, "result from clear reset is %d\n", result); + + /* wait 3 seconds */ + mdelay(3 * 1000); + + return USB_STOR_TRANSPORT_GOOD; +} + +static int usb_stor_freecom_reset(struct us_data *us) +{ + printk (KERN_CRIT "freecom reset called\n"); + + /* We don't really have this feature. */ + return FAILED; +} + +#ifdef CONFIG_USB_STORAGE_DEBUG +static void pdump(struct us_data *us, void *ibuffer, int length) +{ + static char line[80]; + int offset = 0; + unsigned char *buffer = (unsigned char *) ibuffer; + int i, j; + int from, base; + + offset = 0; + for (i = 0; i < length; i++) { + if ((i & 15) == 0) { + if (i > 0) { + offset += sprintf (line+offset, " - "); + for (j = i - 16; j < i; j++) { + if (buffer[j] >= 32 && buffer[j] <= 126) + line[offset++] = buffer[j]; + else + line[offset++] = '.'; + } + line[offset] = 0; + usb_stor_dbg(us, "%s\n", line); + offset = 0; + } + offset += sprintf (line+offset, "%08x:", i); + } else if ((i & 7) == 0) { + offset += sprintf (line+offset, " -"); + } + offset += sprintf (line+offset, " %02x", buffer[i] & 0xff); + } + + /* Add the last "chunk" of data. */ + from = (length - 1) % 16; + base = ((length - 1) / 16) * 16; + + for (i = from + 1; i < 16; i++) + offset += sprintf (line+offset, " "); + if (from < 8) + offset += sprintf (line+offset, " "); + offset += sprintf (line+offset, " - "); + + for (i = 0; i <= from; i++) { + if (buffer[base+i] >= 32 && buffer[base+i] <= 126) + line[offset++] = buffer[base+i]; + else + line[offset++] = '.'; + } + line[offset] = 0; + usb_stor_dbg(us, "%s\n", line); + offset = 0; +} +#endif + +static int freecom_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct us_data *us; + int result; + + result = usb_stor_probe1(&us, intf, id, + (id - freecom_usb_ids) + freecom_unusual_dev_list); + if (result) + return result; + + us->transport_name = "Freecom"; + us->transport = freecom_transport; + us->transport_reset = usb_stor_freecom_reset; + us->max_lun = 0; + + result = usb_stor_probe2(us); + return result; +} + +static struct usb_driver freecom_driver = { + .name = "ums-freecom", + .probe = freecom_probe, + .disconnect = usb_stor_disconnect, + .suspend = usb_stor_suspend, + .resume = usb_stor_resume, + .reset_resume = usb_stor_reset_resume, + .pre_reset = usb_stor_pre_reset, + .post_reset = usb_stor_post_reset, + .id_table = freecom_usb_ids, + .soft_unbind = 1, + .no_dynamic_id = 1, +}; + +module_usb_driver(freecom_driver); diff --git a/kernel/drivers/usb/storage/initializers.c b/kernel/drivers/usb/storage/initializers.c new file mode 100644 index 000000000..31fa2e920 --- /dev/null +++ b/kernel/drivers/usb/storage/initializers.c @@ -0,0 +1,105 @@ +/* Special Initializers for certain USB Mass Storage devices + * + * Current development and maintenance by: + * (c) 1999, 2000 Matthew Dharm (mdharm-usb@one-eyed-alien.net) + * + * This driver is based on the 'USB Mass Storage Class' document. This + * describes in detail the protocol used to communicate with such + * devices. Clearly, the designers had SCSI and ATAPI commands in + * mind when they created this document. The commands are all very + * similar to commands in the SCSI-II and ATAPI specifications. + * + * It is important to note that in a number of cases this class + * exhibits class-specific exemptions from the USB specification. + * Notably the usage of NAK, STALL and ACK differs from the norm, in + * that they are used to communicate wait, failed and OK on commands. + * + * Also, for certain devices, the interrupt endpoint is used to convey + * status of a command. + * + * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more + * information about this driver. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/errno.h> + +#include "usb.h" +#include "initializers.h" +#include "debug.h" +#include "transport.h" + +/* This places the Shuttle/SCM USB<->SCSI bridge devices in multi-target + * mode */ +int usb_stor_euscsi_init(struct us_data *us) +{ + int result; + + usb_stor_dbg(us, "Attempting to init eUSCSI bridge...\n"); + result = usb_stor_control_msg(us, us->send_ctrl_pipe, + 0x0C, USB_RECIP_INTERFACE | USB_TYPE_VENDOR, + 0x01, 0x0, NULL, 0x0, 5 * HZ); + usb_stor_dbg(us, "-- result is %d\n", result); + + return 0; +} + +/* This function is required to activate all four slots on the UCR-61S2B + * flash reader */ +int usb_stor_ucr61s2b_init(struct us_data *us) +{ + struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap*) us->iobuf; + struct bulk_cs_wrap *bcs = (struct bulk_cs_wrap*) us->iobuf; + int res; + unsigned int partial; + static char init_string[] = "\xec\x0a\x06\x00$PCCHIPS"; + + usb_stor_dbg(us, "Sending UCR-61S2B initialization packet...\n"); + + bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN); + bcb->Tag = 0; + bcb->DataTransferLength = cpu_to_le32(0); + bcb->Flags = bcb->Lun = 0; + bcb->Length = sizeof(init_string) - 1; + memset(bcb->CDB, 0, sizeof(bcb->CDB)); + memcpy(bcb->CDB, init_string, sizeof(init_string) - 1); + + res = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, bcb, + US_BULK_CB_WRAP_LEN, &partial); + if (res) + return -EIO; + + usb_stor_dbg(us, "Getting status packet...\n"); + res = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, bcs, + US_BULK_CS_WRAP_LEN, &partial); + if (res) + return -EIO; + + return 0; +} + +/* This places the HUAWEI E220 devices in multi-port mode */ +int usb_stor_huawei_e220_init(struct us_data *us) +{ + int result; + + result = usb_stor_control_msg(us, us->send_ctrl_pipe, + USB_REQ_SET_FEATURE, + USB_TYPE_STANDARD | USB_RECIP_DEVICE, + 0x01, 0x0, NULL, 0x0, 1 * HZ); + usb_stor_dbg(us, "Huawei mode set result is %d\n", result); + return 0; +} diff --git a/kernel/drivers/usb/storage/initializers.h b/kernel/drivers/usb/storage/initializers.h new file mode 100644 index 000000000..529327fbb --- /dev/null +++ b/kernel/drivers/usb/storage/initializers.h @@ -0,0 +1,50 @@ +/* Header file for Special Initializers for certain USB Mass Storage devices + * + * Current development and maintenance by: + * (c) 1999, 2000 Matthew Dharm (mdharm-usb@one-eyed-alien.net) + * + * This driver is based on the 'USB Mass Storage Class' document. This + * describes in detail the protocol used to communicate with such + * devices. Clearly, the designers had SCSI and ATAPI commands in + * mind when they created this document. The commands are all very + * similar to commands in the SCSI-II and ATAPI specifications. + * + * It is important to note that in a number of cases this class + * exhibits class-specific exemptions from the USB specification. + * Notably the usage of NAK, STALL and ACK differs from the norm, in + * that they are used to communicate wait, failed and OK on commands. + * + * Also, for certain devices, the interrupt endpoint is used to convey + * status of a command. + * + * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more + * information about this driver. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include "usb.h" +#include "transport.h" + +/* This places the Shuttle/SCM USB<->SCSI bridge devices in multi-target + * mode */ +int usb_stor_euscsi_init(struct us_data *us); + +/* This function is required to activate all four slots on the UCR-61S2B + * flash reader */ +int usb_stor_ucr61s2b_init(struct us_data *us); + +/* This places the HUAWEI E220 devices in multi-port mode */ +int usb_stor_huawei_e220_init(struct us_data *us); diff --git a/kernel/drivers/usb/storage/isd200.c b/kernel/drivers/usb/storage/isd200.c new file mode 100644 index 000000000..076178645 --- /dev/null +++ b/kernel/drivers/usb/storage/isd200.c @@ -0,0 +1,1572 @@ +/* Transport & Protocol Driver for In-System Design, Inc. ISD200 ASIC + * + * Current development and maintenance: + * (C) 2001-2002 Björn Stenberg (bjorn@haxx.se) + * + * Developed with the assistance of: + * (C) 2002 Alan Stern <stern@rowland.org> + * + * Initial work: + * (C) 2000 In-System Design, Inc. (support@in-system.com) + * + * The ISD200 ASIC does not natively support ATA devices. The chip + * does implement an interface, the ATA Command Block (ATACB) which provides + * a means of passing ATA commands and ATA register accesses to a device. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + * History: + * + * 2002-10-19: Removed the specialized transfer routines. + * (Alan Stern <stern@rowland.harvard.edu>) + * 2001-02-24: Removed lots of duplicate code and simplified the structure. + * (bjorn@haxx.se) + * 2002-01-16: Fixed endianness bug so it works on the ppc arch. + * (Luc Saillard <luc@saillard.org>) + * 2002-01-17: All bitfields removed. + * (bjorn@haxx.se) + */ + + +/* Include files */ + +#include <linux/jiffies.h> +#include <linux/errno.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/ata.h> +#include <linux/hdreg.h> +#include <linux/scatterlist.h> + +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_device.h> + +#include "usb.h" +#include "transport.h" +#include "protocol.h" +#include "debug.h" +#include "scsiglue.h" + +MODULE_DESCRIPTION("Driver for In-System Design, Inc. ISD200 ASIC"); +MODULE_AUTHOR("Björn Stenberg <bjorn@haxx.se>"); +MODULE_LICENSE("GPL"); + +static int isd200_Initialization(struct us_data *us); + + +/* + * The table of devices + */ +#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ + vendorName, productName, useProtocol, useTransport, \ + initFunction, flags) \ +{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ + .driver_info = (flags) } + +static struct usb_device_id isd200_usb_ids[] = { +# include "unusual_isd200.h" + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, isd200_usb_ids); + +#undef UNUSUAL_DEV + +/* + * The flags table + */ +#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \ + vendor_name, product_name, use_protocol, use_transport, \ + init_function, Flags) \ +{ \ + .vendorName = vendor_name, \ + .productName = product_name, \ + .useProtocol = use_protocol, \ + .useTransport = use_transport, \ + .initFunction = init_function, \ +} + +static struct us_unusual_dev isd200_unusual_dev_list[] = { +# include "unusual_isd200.h" + { } /* Terminating entry */ +}; + +#undef UNUSUAL_DEV + +/* Timeout defines (in Seconds) */ + +#define ISD200_ENUM_BSY_TIMEOUT 35 +#define ISD200_ENUM_DETECT_TIMEOUT 30 +#define ISD200_DEFAULT_TIMEOUT 30 + +/* device flags */ +#define DF_ATA_DEVICE 0x0001 +#define DF_MEDIA_STATUS_ENABLED 0x0002 +#define DF_REMOVABLE_MEDIA 0x0004 + +/* capability bit definitions */ +#define CAPABILITY_DMA 0x01 +#define CAPABILITY_LBA 0x02 + +/* command_setX bit definitions */ +#define COMMANDSET_REMOVABLE 0x02 +#define COMMANDSET_MEDIA_STATUS 0x10 + +/* ATA Vendor Specific defines */ +#define ATA_ADDRESS_DEVHEAD_STD 0xa0 +#define ATA_ADDRESS_DEVHEAD_LBA_MODE 0x40 +#define ATA_ADDRESS_DEVHEAD_SLAVE 0x10 + +/* Action Select bits */ +#define ACTION_SELECT_0 0x01 +#define ACTION_SELECT_1 0x02 +#define ACTION_SELECT_2 0x04 +#define ACTION_SELECT_3 0x08 +#define ACTION_SELECT_4 0x10 +#define ACTION_SELECT_5 0x20 +#define ACTION_SELECT_6 0x40 +#define ACTION_SELECT_7 0x80 + +/* Register Select bits */ +#define REG_ALTERNATE_STATUS 0x01 +#define REG_DEVICE_CONTROL 0x01 +#define REG_ERROR 0x02 +#define REG_FEATURES 0x02 +#define REG_SECTOR_COUNT 0x04 +#define REG_SECTOR_NUMBER 0x08 +#define REG_CYLINDER_LOW 0x10 +#define REG_CYLINDER_HIGH 0x20 +#define REG_DEVICE_HEAD 0x40 +#define REG_STATUS 0x80 +#define REG_COMMAND 0x80 + +/* ATA registers offset definitions */ +#define ATA_REG_ERROR_OFFSET 1 +#define ATA_REG_LCYL_OFFSET 4 +#define ATA_REG_HCYL_OFFSET 5 +#define ATA_REG_STATUS_OFFSET 7 + +/* ATA error definitions not in <linux/hdreg.h> */ +#define ATA_ERROR_MEDIA_CHANGE 0x20 + +/* ATA command definitions not in <linux/hdreg.h> */ +#define ATA_COMMAND_GET_MEDIA_STATUS 0xDA +#define ATA_COMMAND_MEDIA_EJECT 0xED + +/* ATA drive control definitions */ +#define ATA_DC_DISABLE_INTERRUPTS 0x02 +#define ATA_DC_RESET_CONTROLLER 0x04 +#define ATA_DC_REENABLE_CONTROLLER 0x00 + +/* + * General purpose return codes + */ + +#define ISD200_ERROR -1 +#define ISD200_GOOD 0 + +/* + * Transport return codes + */ + +#define ISD200_TRANSPORT_GOOD 0 /* Transport good, command good */ +#define ISD200_TRANSPORT_FAILED 1 /* Transport good, command failed */ +#define ISD200_TRANSPORT_ERROR 2 /* Transport bad (i.e. device dead) */ + +/* driver action codes */ +#define ACTION_READ_STATUS 0 +#define ACTION_RESET 1 +#define ACTION_REENABLE 2 +#define ACTION_SOFT_RESET 3 +#define ACTION_ENUM 4 +#define ACTION_IDENTIFY 5 + + +/* + * ata_cdb struct + */ + + +union ata_cdb { + struct { + unsigned char SignatureByte0; + unsigned char SignatureByte1; + unsigned char ActionSelect; + unsigned char RegisterSelect; + unsigned char TransferBlockSize; + unsigned char WriteData3F6; + unsigned char WriteData1F1; + unsigned char WriteData1F2; + unsigned char WriteData1F3; + unsigned char WriteData1F4; + unsigned char WriteData1F5; + unsigned char WriteData1F6; + unsigned char WriteData1F7; + unsigned char Reserved[3]; + } generic; + + struct { + unsigned char SignatureByte0; + unsigned char SignatureByte1; + unsigned char ActionSelect; + unsigned char RegisterSelect; + unsigned char TransferBlockSize; + unsigned char AlternateStatusByte; + unsigned char ErrorByte; + unsigned char SectorCountByte; + unsigned char SectorNumberByte; + unsigned char CylinderLowByte; + unsigned char CylinderHighByte; + unsigned char DeviceHeadByte; + unsigned char StatusByte; + unsigned char Reserved[3]; + } read; + + struct { + unsigned char SignatureByte0; + unsigned char SignatureByte1; + unsigned char ActionSelect; + unsigned char RegisterSelect; + unsigned char TransferBlockSize; + unsigned char DeviceControlByte; + unsigned char FeaturesByte; + unsigned char SectorCountByte; + unsigned char SectorNumberByte; + unsigned char CylinderLowByte; + unsigned char CylinderHighByte; + unsigned char DeviceHeadByte; + unsigned char CommandByte; + unsigned char Reserved[3]; + } write; +}; + + +/* + * Inquiry data structure. This is the data returned from the target + * after it receives an inquiry. + * + * This structure may be extended by the number of bytes specified + * in the field AdditionalLength. The defined size constant only + * includes fields through ProductRevisionLevel. + */ + +/* + * DeviceType field + */ +#define DIRECT_ACCESS_DEVICE 0x00 /* disks */ +#define DEVICE_REMOVABLE 0x80 + +struct inquiry_data { + unsigned char DeviceType; + unsigned char DeviceTypeModifier; + unsigned char Versions; + unsigned char Format; + unsigned char AdditionalLength; + unsigned char Reserved[2]; + unsigned char Capability; + unsigned char VendorId[8]; + unsigned char ProductId[16]; + unsigned char ProductRevisionLevel[4]; + unsigned char VendorSpecific[20]; + unsigned char Reserved3[40]; +} __attribute__ ((packed)); + +/* + * INQUIRY data buffer size + */ + +#define INQUIRYDATABUFFERSIZE 36 + + +/* + * ISD200 CONFIG data struct + */ + +#define ATACFG_TIMING 0x0f +#define ATACFG_ATAPI_RESET 0x10 +#define ATACFG_MASTER 0x20 +#define ATACFG_BLOCKSIZE 0xa0 + +#define ATACFGE_LAST_LUN 0x07 +#define ATACFGE_DESC_OVERRIDE 0x08 +#define ATACFGE_STATE_SUSPEND 0x10 +#define ATACFGE_SKIP_BOOT 0x20 +#define ATACFGE_CONF_DESC2 0x40 +#define ATACFGE_INIT_STATUS 0x80 + +#define CFG_CAPABILITY_SRST 0x01 + +struct isd200_config { + unsigned char EventNotification; + unsigned char ExternalClock; + unsigned char ATAInitTimeout; + unsigned char ATAConfig; + unsigned char ATAMajorCommand; + unsigned char ATAMinorCommand; + unsigned char ATAExtraConfig; + unsigned char Capability; +}__attribute__ ((packed)); + + +/* + * ISD200 driver information struct + */ + +struct isd200_info { + struct inquiry_data InquiryData; + u16 *id; + struct isd200_config ConfigData; + unsigned char *RegsBuf; + unsigned char ATARegs[8]; + unsigned char DeviceHead; + unsigned char DeviceFlags; + + /* maximum number of LUNs supported */ + unsigned char MaxLUNs; + unsigned char cmnd[BLK_MAX_CDB]; + struct scsi_cmnd srb; + struct scatterlist sg; +}; + + +/* + * Read Capacity Data - returned in Big Endian format + */ + +struct read_capacity_data { + __be32 LogicalBlockAddress; + __be32 BytesPerBlock; +}; + +/* + * Read Block Limits Data - returned in Big Endian format + * This structure returns the maximum and minimum block + * size for a TAPE device. + */ + +struct read_block_limits { + unsigned char Reserved; + unsigned char BlockMaximumSize[3]; + unsigned char BlockMinimumSize[2]; +}; + + +/* + * Sense Data Format + */ + +#define SENSE_ERRCODE 0x7f +#define SENSE_ERRCODE_VALID 0x80 +#define SENSE_FLAG_SENSE_KEY 0x0f +#define SENSE_FLAG_BAD_LENGTH 0x20 +#define SENSE_FLAG_END_OF_MEDIA 0x40 +#define SENSE_FLAG_FILE_MARK 0x80 +struct sense_data { + unsigned char ErrorCode; + unsigned char SegmentNumber; + unsigned char Flags; + unsigned char Information[4]; + unsigned char AdditionalSenseLength; + unsigned char CommandSpecificInformation[4]; + unsigned char AdditionalSenseCode; + unsigned char AdditionalSenseCodeQualifier; + unsigned char FieldReplaceableUnitCode; + unsigned char SenseKeySpecific[3]; +} __attribute__ ((packed)); + +/* + * Default request sense buffer size + */ + +#define SENSE_BUFFER_SIZE 18 + +/*********************************************************************** + * Helper routines + ***********************************************************************/ + +/************************************************************************** + * isd200_build_sense + * + * Builds an artificial sense buffer to report the results of a + * failed command. + * + * RETURNS: + * void + */ +static void isd200_build_sense(struct us_data *us, struct scsi_cmnd *srb) +{ + struct isd200_info *info = (struct isd200_info *)us->extra; + struct sense_data *buf = (struct sense_data *) &srb->sense_buffer[0]; + unsigned char error = info->ATARegs[ATA_REG_ERROR_OFFSET]; + + if(error & ATA_ERROR_MEDIA_CHANGE) { + buf->ErrorCode = 0x70 | SENSE_ERRCODE_VALID; + buf->AdditionalSenseLength = 0xb; + buf->Flags = UNIT_ATTENTION; + buf->AdditionalSenseCode = 0; + buf->AdditionalSenseCodeQualifier = 0; + } else if (error & ATA_MCR) { + buf->ErrorCode = 0x70 | SENSE_ERRCODE_VALID; + buf->AdditionalSenseLength = 0xb; + buf->Flags = UNIT_ATTENTION; + buf->AdditionalSenseCode = 0; + buf->AdditionalSenseCodeQualifier = 0; + } else if (error & ATA_TRK0NF) { + buf->ErrorCode = 0x70 | SENSE_ERRCODE_VALID; + buf->AdditionalSenseLength = 0xb; + buf->Flags = NOT_READY; + buf->AdditionalSenseCode = 0; + buf->AdditionalSenseCodeQualifier = 0; + } else if (error & ATA_UNC) { + buf->ErrorCode = 0x70 | SENSE_ERRCODE_VALID; + buf->AdditionalSenseLength = 0xb; + buf->Flags = DATA_PROTECT; + buf->AdditionalSenseCode = 0; + buf->AdditionalSenseCodeQualifier = 0; + } else { + buf->ErrorCode = 0; + buf->AdditionalSenseLength = 0; + buf->Flags = 0; + buf->AdditionalSenseCode = 0; + buf->AdditionalSenseCodeQualifier = 0; + } +} + + +/*********************************************************************** + * Transport routines + ***********************************************************************/ + +/************************************************************************** + * isd200_set_srb(), isd200_srb_set_bufflen() + * + * Two helpers to facilitate in initialization of scsi_cmnd structure + * Will need to change when struct scsi_cmnd changes + */ +static void isd200_set_srb(struct isd200_info *info, + enum dma_data_direction dir, void* buff, unsigned bufflen) +{ + struct scsi_cmnd *srb = &info->srb; + + if (buff) + sg_init_one(&info->sg, buff, bufflen); + + srb->sc_data_direction = dir; + srb->sdb.table.sgl = buff ? &info->sg : NULL; + srb->sdb.length = bufflen; + srb->sdb.table.nents = buff ? 1 : 0; +} + +static void isd200_srb_set_bufflen(struct scsi_cmnd *srb, unsigned bufflen) +{ + srb->sdb.length = bufflen; +} + + +/************************************************************************** + * isd200_action + * + * Routine for sending commands to the isd200 + * + * RETURNS: + * ISD status code + */ +static int isd200_action( struct us_data *us, int action, + void* pointer, int value ) +{ + union ata_cdb ata; + /* static to prevent this large struct being placed on the valuable stack */ + static struct scsi_device srb_dev; + struct isd200_info *info = (struct isd200_info *)us->extra; + struct scsi_cmnd *srb = &info->srb; + int status; + + memset(&ata, 0, sizeof(ata)); + srb->cmnd = info->cmnd; + srb->device = &srb_dev; + + ata.generic.SignatureByte0 = info->ConfigData.ATAMajorCommand; + ata.generic.SignatureByte1 = info->ConfigData.ATAMinorCommand; + ata.generic.TransferBlockSize = 1; + + switch ( action ) { + case ACTION_READ_STATUS: + usb_stor_dbg(us, " isd200_action(READ_STATUS)\n"); + ata.generic.ActionSelect = ACTION_SELECT_0|ACTION_SELECT_2; + ata.generic.RegisterSelect = + REG_CYLINDER_LOW | REG_CYLINDER_HIGH | + REG_STATUS | REG_ERROR; + isd200_set_srb(info, DMA_FROM_DEVICE, pointer, value); + break; + + case ACTION_ENUM: + usb_stor_dbg(us, " isd200_action(ENUM,0x%02x)\n", value); + ata.generic.ActionSelect = ACTION_SELECT_1|ACTION_SELECT_2| + ACTION_SELECT_3|ACTION_SELECT_4| + ACTION_SELECT_5; + ata.generic.RegisterSelect = REG_DEVICE_HEAD; + ata.write.DeviceHeadByte = value; + isd200_set_srb(info, DMA_NONE, NULL, 0); + break; + + case ACTION_RESET: + usb_stor_dbg(us, " isd200_action(RESET)\n"); + ata.generic.ActionSelect = ACTION_SELECT_1|ACTION_SELECT_2| + ACTION_SELECT_3|ACTION_SELECT_4; + ata.generic.RegisterSelect = REG_DEVICE_CONTROL; + ata.write.DeviceControlByte = ATA_DC_RESET_CONTROLLER; + isd200_set_srb(info, DMA_NONE, NULL, 0); + break; + + case ACTION_REENABLE: + usb_stor_dbg(us, " isd200_action(REENABLE)\n"); + ata.generic.ActionSelect = ACTION_SELECT_1|ACTION_SELECT_2| + ACTION_SELECT_3|ACTION_SELECT_4; + ata.generic.RegisterSelect = REG_DEVICE_CONTROL; + ata.write.DeviceControlByte = ATA_DC_REENABLE_CONTROLLER; + isd200_set_srb(info, DMA_NONE, NULL, 0); + break; + + case ACTION_SOFT_RESET: + usb_stor_dbg(us, " isd200_action(SOFT_RESET)\n"); + ata.generic.ActionSelect = ACTION_SELECT_1|ACTION_SELECT_5; + ata.generic.RegisterSelect = REG_DEVICE_HEAD | REG_COMMAND; + ata.write.DeviceHeadByte = info->DeviceHead; + ata.write.CommandByte = ATA_CMD_DEV_RESET; + isd200_set_srb(info, DMA_NONE, NULL, 0); + break; + + case ACTION_IDENTIFY: + usb_stor_dbg(us, " isd200_action(IDENTIFY)\n"); + ata.generic.RegisterSelect = REG_COMMAND; + ata.write.CommandByte = ATA_CMD_ID_ATA; + isd200_set_srb(info, DMA_FROM_DEVICE, info->id, + ATA_ID_WORDS * 2); + break; + + default: + usb_stor_dbg(us, "Error: Undefined action %d\n", action); + return ISD200_ERROR; + } + + memcpy(srb->cmnd, &ata, sizeof(ata.generic)); + srb->cmd_len = sizeof(ata.generic); + status = usb_stor_Bulk_transport(srb, us); + if (status == USB_STOR_TRANSPORT_GOOD) + status = ISD200_GOOD; + else { + usb_stor_dbg(us, " isd200_action(0x%02x) error: %d\n", + action, status); + status = ISD200_ERROR; + /* need to reset device here */ + } + + return status; +} + +/************************************************************************** + * isd200_read_regs + * + * Read ATA Registers + * + * RETURNS: + * ISD status code + */ +static int isd200_read_regs( struct us_data *us ) +{ + struct isd200_info *info = (struct isd200_info *)us->extra; + int retStatus = ISD200_GOOD; + int transferStatus; + + usb_stor_dbg(us, "Entering isd200_IssueATAReadRegs\n"); + + transferStatus = isd200_action( us, ACTION_READ_STATUS, + info->RegsBuf, sizeof(info->ATARegs) ); + if (transferStatus != ISD200_TRANSPORT_GOOD) { + usb_stor_dbg(us, " Error reading ATA registers\n"); + retStatus = ISD200_ERROR; + } else { + memcpy(info->ATARegs, info->RegsBuf, sizeof(info->ATARegs)); + usb_stor_dbg(us, " Got ATA Register[ATA_REG_ERROR_OFFSET] = 0x%x\n", + info->ATARegs[ATA_REG_ERROR_OFFSET]); + } + + return retStatus; +} + + +/************************************************************************** + * Invoke the transport and basic error-handling/recovery methods + * + * This is used by the protocol layers to actually send the message to + * the device and receive the response. + */ +static void isd200_invoke_transport( struct us_data *us, + struct scsi_cmnd *srb, + union ata_cdb *ataCdb ) +{ + int need_auto_sense = 0; + int transferStatus; + int result; + + /* send the command to the transport layer */ + memcpy(srb->cmnd, ataCdb, sizeof(ataCdb->generic)); + srb->cmd_len = sizeof(ataCdb->generic); + transferStatus = usb_stor_Bulk_transport(srb, us); + + /* if the command gets aborted by the higher layers, we need to + * short-circuit all other processing + */ + if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) { + usb_stor_dbg(us, "-- command was aborted\n"); + goto Handle_Abort; + } + + switch (transferStatus) { + + case USB_STOR_TRANSPORT_GOOD: + /* Indicate a good result */ + srb->result = SAM_STAT_GOOD; + break; + + case USB_STOR_TRANSPORT_NO_SENSE: + usb_stor_dbg(us, "-- transport indicates protocol failure\n"); + srb->result = SAM_STAT_CHECK_CONDITION; + return; + + case USB_STOR_TRANSPORT_FAILED: + usb_stor_dbg(us, "-- transport indicates command failure\n"); + need_auto_sense = 1; + break; + + case USB_STOR_TRANSPORT_ERROR: + usb_stor_dbg(us, "-- transport indicates transport error\n"); + srb->result = DID_ERROR << 16; + /* Need reset here */ + return; + + default: + usb_stor_dbg(us, "-- transport indicates unknown error\n"); + srb->result = DID_ERROR << 16; + /* Need reset here */ + return; + } + + if ((scsi_get_resid(srb) > 0) && + !((srb->cmnd[0] == REQUEST_SENSE) || + (srb->cmnd[0] == INQUIRY) || + (srb->cmnd[0] == MODE_SENSE) || + (srb->cmnd[0] == LOG_SENSE) || + (srb->cmnd[0] == MODE_SENSE_10))) { + usb_stor_dbg(us, "-- unexpectedly short transfer\n"); + need_auto_sense = 1; + } + + if (need_auto_sense) { + result = isd200_read_regs(us); + if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) { + usb_stor_dbg(us, "-- auto-sense aborted\n"); + goto Handle_Abort; + } + if (result == ISD200_GOOD) { + isd200_build_sense(us, srb); + srb->result = SAM_STAT_CHECK_CONDITION; + + /* If things are really okay, then let's show that */ + if ((srb->sense_buffer[2] & 0xf) == 0x0) + srb->result = SAM_STAT_GOOD; + } else { + srb->result = DID_ERROR << 16; + /* Need reset here */ + } + } + + /* Regardless of auto-sense, if we _know_ we have an error + * condition, show that in the result code + */ + if (transferStatus == USB_STOR_TRANSPORT_FAILED) + srb->result = SAM_STAT_CHECK_CONDITION; + return; + + /* abort processing: the bulk-only transport requires a reset + * following an abort */ + Handle_Abort: + srb->result = DID_ABORT << 16; + + /* permit the reset transfer to take place */ + clear_bit(US_FLIDX_ABORTING, &us->dflags); + /* Need reset here */ +} + +#ifdef CONFIG_USB_STORAGE_DEBUG +static void isd200_log_config(struct us_data *us, struct isd200_info *info) +{ + usb_stor_dbg(us, " Event Notification: 0x%x\n", + info->ConfigData.EventNotification); + usb_stor_dbg(us, " External Clock: 0x%x\n", + info->ConfigData.ExternalClock); + usb_stor_dbg(us, " ATA Init Timeout: 0x%x\n", + info->ConfigData.ATAInitTimeout); + usb_stor_dbg(us, " ATAPI Command Block Size: 0x%x\n", + (info->ConfigData.ATAConfig & ATACFG_BLOCKSIZE) >> 6); + usb_stor_dbg(us, " Master/Slave Selection: 0x%x\n", + info->ConfigData.ATAConfig & ATACFG_MASTER); + usb_stor_dbg(us, " ATAPI Reset: 0x%x\n", + info->ConfigData.ATAConfig & ATACFG_ATAPI_RESET); + usb_stor_dbg(us, " ATA Timing: 0x%x\n", + info->ConfigData.ATAConfig & ATACFG_TIMING); + usb_stor_dbg(us, " ATA Major Command: 0x%x\n", + info->ConfigData.ATAMajorCommand); + usb_stor_dbg(us, " ATA Minor Command: 0x%x\n", + info->ConfigData.ATAMinorCommand); + usb_stor_dbg(us, " Init Status: 0x%x\n", + info->ConfigData.ATAExtraConfig & ATACFGE_INIT_STATUS); + usb_stor_dbg(us, " Config Descriptor 2: 0x%x\n", + info->ConfigData.ATAExtraConfig & ATACFGE_CONF_DESC2); + usb_stor_dbg(us, " Skip Device Boot: 0x%x\n", + info->ConfigData.ATAExtraConfig & ATACFGE_SKIP_BOOT); + usb_stor_dbg(us, " ATA 3 State Suspend: 0x%x\n", + info->ConfigData.ATAExtraConfig & ATACFGE_STATE_SUSPEND); + usb_stor_dbg(us, " Descriptor Override: 0x%x\n", + info->ConfigData.ATAExtraConfig & ATACFGE_DESC_OVERRIDE); + usb_stor_dbg(us, " Last LUN Identifier: 0x%x\n", + info->ConfigData.ATAExtraConfig & ATACFGE_LAST_LUN); + usb_stor_dbg(us, " SRST Enable: 0x%x\n", + info->ConfigData.ATAExtraConfig & CFG_CAPABILITY_SRST); +} +#endif + +/************************************************************************** + * isd200_write_config + * + * Write the ISD200 Configuration data + * + * RETURNS: + * ISD status code + */ +static int isd200_write_config( struct us_data *us ) +{ + struct isd200_info *info = (struct isd200_info *)us->extra; + int retStatus = ISD200_GOOD; + int result; + +#ifdef CONFIG_USB_STORAGE_DEBUG + usb_stor_dbg(us, "Entering isd200_write_config\n"); + usb_stor_dbg(us, " Writing the following ISD200 Config Data:\n"); + isd200_log_config(us, info); +#endif + + /* let's send the command via the control pipe */ + result = usb_stor_ctrl_transfer( + us, + us->send_ctrl_pipe, + 0x01, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, + 0x0000, + 0x0002, + (void *) &info->ConfigData, + sizeof(info->ConfigData)); + + if (result >= 0) { + usb_stor_dbg(us, " ISD200 Config Data was written successfully\n"); + } else { + usb_stor_dbg(us, " Request to write ISD200 Config Data failed!\n"); + retStatus = ISD200_ERROR; + } + + usb_stor_dbg(us, "Leaving isd200_write_config %08X\n", retStatus); + return retStatus; +} + + +/************************************************************************** + * isd200_read_config + * + * Reads the ISD200 Configuration data + * + * RETURNS: + * ISD status code + */ +static int isd200_read_config( struct us_data *us ) +{ + struct isd200_info *info = (struct isd200_info *)us->extra; + int retStatus = ISD200_GOOD; + int result; + + usb_stor_dbg(us, "Entering isd200_read_config\n"); + + /* read the configuration information from ISD200. Use this to */ + /* determine what the special ATA CDB bytes are. */ + + result = usb_stor_ctrl_transfer( + us, + us->recv_ctrl_pipe, + 0x02, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, + 0x0000, + 0x0002, + (void *) &info->ConfigData, + sizeof(info->ConfigData)); + + + if (result >= 0) { + usb_stor_dbg(us, " Retrieved the following ISD200 Config Data:\n"); +#ifdef CONFIG_USB_STORAGE_DEBUG + isd200_log_config(us, info); +#endif + } else { + usb_stor_dbg(us, " Request to get ISD200 Config Data failed!\n"); + retStatus = ISD200_ERROR; + } + + usb_stor_dbg(us, "Leaving isd200_read_config %08X\n", retStatus); + return retStatus; +} + + +/************************************************************************** + * isd200_atapi_soft_reset + * + * Perform an Atapi Soft Reset on the device + * + * RETURNS: + * NT status code + */ +static int isd200_atapi_soft_reset( struct us_data *us ) +{ + int retStatus = ISD200_GOOD; + int transferStatus; + + usb_stor_dbg(us, "Entering isd200_atapi_soft_reset\n"); + + transferStatus = isd200_action( us, ACTION_SOFT_RESET, NULL, 0 ); + if (transferStatus != ISD200_TRANSPORT_GOOD) { + usb_stor_dbg(us, " Error issuing Atapi Soft Reset\n"); + retStatus = ISD200_ERROR; + } + + usb_stor_dbg(us, "Leaving isd200_atapi_soft_reset %08X\n", retStatus); + return retStatus; +} + + +/************************************************************************** + * isd200_srst + * + * Perform an SRST on the device + * + * RETURNS: + * ISD status code + */ +static int isd200_srst( struct us_data *us ) +{ + int retStatus = ISD200_GOOD; + int transferStatus; + + usb_stor_dbg(us, "Entering isd200_SRST\n"); + + transferStatus = isd200_action( us, ACTION_RESET, NULL, 0 ); + + /* check to see if this request failed */ + if (transferStatus != ISD200_TRANSPORT_GOOD) { + usb_stor_dbg(us, " Error issuing SRST\n"); + retStatus = ISD200_ERROR; + } else { + /* delay 10ms to give the drive a chance to see it */ + msleep(10); + + transferStatus = isd200_action( us, ACTION_REENABLE, NULL, 0 ); + if (transferStatus != ISD200_TRANSPORT_GOOD) { + usb_stor_dbg(us, " Error taking drive out of reset\n"); + retStatus = ISD200_ERROR; + } else { + /* delay 50ms to give the drive a chance to recover after SRST */ + msleep(50); + } + } + + usb_stor_dbg(us, "Leaving isd200_srst %08X\n", retStatus); + return retStatus; +} + + +/************************************************************************** + * isd200_try_enum + * + * Helper function for isd200_manual_enum(). Does ENUM and READ_STATUS + * and tries to analyze the status registers + * + * RETURNS: + * ISD status code + */ +static int isd200_try_enum(struct us_data *us, unsigned char master_slave, + int detect ) +{ + int status = ISD200_GOOD; + unsigned long endTime; + struct isd200_info *info = (struct isd200_info *)us->extra; + unsigned char *regs = info->RegsBuf; + int recheckAsMaster = 0; + + if ( detect ) + endTime = jiffies + ISD200_ENUM_DETECT_TIMEOUT * HZ; + else + endTime = jiffies + ISD200_ENUM_BSY_TIMEOUT * HZ; + + /* loop until we detect !BSY or timeout */ + while(1) { + + status = isd200_action( us, ACTION_ENUM, NULL, master_slave ); + if ( status != ISD200_GOOD ) + break; + + status = isd200_action( us, ACTION_READ_STATUS, + regs, 8 ); + if ( status != ISD200_GOOD ) + break; + + if (!detect) { + if (regs[ATA_REG_STATUS_OFFSET] & ATA_BUSY) { + usb_stor_dbg(us, " %s status is still BSY, try again...\n", + master_slave == ATA_ADDRESS_DEVHEAD_STD ? + "Master" : "Slave"); + } else { + usb_stor_dbg(us, " %s status !BSY, continue with next operation\n", + master_slave == ATA_ADDRESS_DEVHEAD_STD ? + "Master" : "Slave"); + break; + } + } + /* check for ATA_BUSY and */ + /* ATA_DF (workaround ATA Zip drive) and */ + /* ATA_ERR (workaround for Archos CD-ROM) */ + else if (regs[ATA_REG_STATUS_OFFSET] & + (ATA_BUSY | ATA_DF | ATA_ERR)) { + usb_stor_dbg(us, " Status indicates it is not ready, try again...\n"); + } + /* check for DRDY, ATA devices set DRDY after SRST */ + else if (regs[ATA_REG_STATUS_OFFSET] & ATA_DRDY) { + usb_stor_dbg(us, " Identified ATA device\n"); + info->DeviceFlags |= DF_ATA_DEVICE; + info->DeviceHead = master_slave; + break; + } + /* check Cylinder High/Low to + determine if it is an ATAPI device + */ + else if (regs[ATA_REG_HCYL_OFFSET] == 0xEB && + regs[ATA_REG_LCYL_OFFSET] == 0x14) { + /* It seems that the RICOH + MP6200A CD/RW drive will + report itself okay as a + slave when it is really a + master. So this check again + as a master device just to + make sure it doesn't report + itself okay as a master also + */ + if ((master_slave & ATA_ADDRESS_DEVHEAD_SLAVE) && + !recheckAsMaster) { + usb_stor_dbg(us, " Identified ATAPI device as slave. Rechecking again as master\n"); + recheckAsMaster = 1; + master_slave = ATA_ADDRESS_DEVHEAD_STD; + } else { + usb_stor_dbg(us, " Identified ATAPI device\n"); + info->DeviceHead = master_slave; + + status = isd200_atapi_soft_reset(us); + break; + } + } else { + usb_stor_dbg(us, " Not ATA, not ATAPI - Weird\n"); + break; + } + + /* check for timeout on this request */ + if (time_after_eq(jiffies, endTime)) { + if (!detect) + usb_stor_dbg(us, " BSY check timeout, just continue with next operation...\n"); + else + usb_stor_dbg(us, " Device detect timeout!\n"); + break; + } + } + + return status; +} + +/************************************************************************** + * isd200_manual_enum + * + * Determines if the drive attached is an ATA or ATAPI and if it is a + * master or slave. + * + * RETURNS: + * ISD status code + */ +static int isd200_manual_enum(struct us_data *us) +{ + struct isd200_info *info = (struct isd200_info *)us->extra; + int retStatus = ISD200_GOOD; + + usb_stor_dbg(us, "Entering isd200_manual_enum\n"); + + retStatus = isd200_read_config(us); + if (retStatus == ISD200_GOOD) { + int isslave; + /* master or slave? */ + retStatus = isd200_try_enum( us, ATA_ADDRESS_DEVHEAD_STD, 0); + if (retStatus == ISD200_GOOD) + retStatus = isd200_try_enum( us, ATA_ADDRESS_DEVHEAD_SLAVE, 0); + + if (retStatus == ISD200_GOOD) { + retStatus = isd200_srst(us); + if (retStatus == ISD200_GOOD) + /* ata or atapi? */ + retStatus = isd200_try_enum( us, ATA_ADDRESS_DEVHEAD_STD, 1); + } + + isslave = (info->DeviceHead & ATA_ADDRESS_DEVHEAD_SLAVE) ? 1 : 0; + if (!(info->ConfigData.ATAConfig & ATACFG_MASTER)) { + usb_stor_dbg(us, " Setting Master/Slave selection to %d\n", + isslave); + info->ConfigData.ATAConfig &= 0x3f; + info->ConfigData.ATAConfig |= (isslave<<6); + retStatus = isd200_write_config(us); + } + } + + usb_stor_dbg(us, "Leaving isd200_manual_enum %08X\n", retStatus); + return(retStatus); +} + +static void isd200_fix_driveid(u16 *id) +{ +#ifndef __LITTLE_ENDIAN +# ifdef __BIG_ENDIAN + int i; + + for (i = 0; i < ATA_ID_WORDS; i++) + id[i] = __le16_to_cpu(id[i]); +# else +# error "Please fix <asm/byteorder.h>" +# endif +#endif +} + +static void isd200_dump_driveid(struct us_data *us, u16 *id) +{ + usb_stor_dbg(us, " Identify Data Structure:\n"); + usb_stor_dbg(us, " config = 0x%x\n", id[ATA_ID_CONFIG]); + usb_stor_dbg(us, " cyls = 0x%x\n", id[ATA_ID_CYLS]); + usb_stor_dbg(us, " heads = 0x%x\n", id[ATA_ID_HEADS]); + usb_stor_dbg(us, " track_bytes = 0x%x\n", id[4]); + usb_stor_dbg(us, " sector_bytes = 0x%x\n", id[5]); + usb_stor_dbg(us, " sectors = 0x%x\n", id[ATA_ID_SECTORS]); + usb_stor_dbg(us, " serial_no[0] = 0x%x\n", *(char *)&id[ATA_ID_SERNO]); + usb_stor_dbg(us, " buf_type = 0x%x\n", id[20]); + usb_stor_dbg(us, " buf_size = 0x%x\n", id[ATA_ID_BUF_SIZE]); + usb_stor_dbg(us, " ecc_bytes = 0x%x\n", id[22]); + usb_stor_dbg(us, " fw_rev[0] = 0x%x\n", *(char *)&id[ATA_ID_FW_REV]); + usb_stor_dbg(us, " model[0] = 0x%x\n", *(char *)&id[ATA_ID_PROD]); + usb_stor_dbg(us, " max_multsect = 0x%x\n", id[ATA_ID_MAX_MULTSECT] & 0xff); + usb_stor_dbg(us, " dword_io = 0x%x\n", id[ATA_ID_DWORD_IO]); + usb_stor_dbg(us, " capability = 0x%x\n", id[ATA_ID_CAPABILITY] >> 8); + usb_stor_dbg(us, " tPIO = 0x%x\n", id[ATA_ID_OLD_PIO_MODES] >> 8); + usb_stor_dbg(us, " tDMA = 0x%x\n", id[ATA_ID_OLD_DMA_MODES] >> 8); + usb_stor_dbg(us, " field_valid = 0x%x\n", id[ATA_ID_FIELD_VALID]); + usb_stor_dbg(us, " cur_cyls = 0x%x\n", id[ATA_ID_CUR_CYLS]); + usb_stor_dbg(us, " cur_heads = 0x%x\n", id[ATA_ID_CUR_HEADS]); + usb_stor_dbg(us, " cur_sectors = 0x%x\n", id[ATA_ID_CUR_SECTORS]); + usb_stor_dbg(us, " cur_capacity = 0x%x\n", ata_id_u32(id, 57)); + usb_stor_dbg(us, " multsect = 0x%x\n", id[ATA_ID_MULTSECT] & 0xff); + usb_stor_dbg(us, " lba_capacity = 0x%x\n", ata_id_u32(id, ATA_ID_LBA_CAPACITY)); + usb_stor_dbg(us, " command_set_1 = 0x%x\n", id[ATA_ID_COMMAND_SET_1]); + usb_stor_dbg(us, " command_set_2 = 0x%x\n", id[ATA_ID_COMMAND_SET_2]); +} + +/************************************************************************** + * isd200_get_inquiry_data + * + * Get inquiry data + * + * RETURNS: + * ISD status code + */ +static int isd200_get_inquiry_data( struct us_data *us ) +{ + struct isd200_info *info = (struct isd200_info *)us->extra; + int retStatus = ISD200_GOOD; + u16 *id = info->id; + + usb_stor_dbg(us, "Entering isd200_get_inquiry_data\n"); + + /* set default to Master */ + info->DeviceHead = ATA_ADDRESS_DEVHEAD_STD; + + /* attempt to manually enumerate this device */ + retStatus = isd200_manual_enum(us); + if (retStatus == ISD200_GOOD) { + int transferStatus; + + /* check for an ATA device */ + if (info->DeviceFlags & DF_ATA_DEVICE) { + /* this must be an ATA device */ + /* perform an ATA Command Identify */ + transferStatus = isd200_action( us, ACTION_IDENTIFY, + id, ATA_ID_WORDS * 2); + if (transferStatus != ISD200_TRANSPORT_GOOD) { + /* Error issuing ATA Command Identify */ + usb_stor_dbg(us, " Error issuing ATA Command Identify\n"); + retStatus = ISD200_ERROR; + } else { + /* ATA Command Identify successful */ + int i; + __be16 *src; + __u16 *dest; + + isd200_fix_driveid(id); + isd200_dump_driveid(us, id); + + memset(&info->InquiryData, 0, sizeof(info->InquiryData)); + + /* Standard IDE interface only supports disks */ + info->InquiryData.DeviceType = DIRECT_ACCESS_DEVICE; + + /* The length must be at least 36 (5 + 31) */ + info->InquiryData.AdditionalLength = 0x1F; + + if (id[ATA_ID_COMMAND_SET_1] & COMMANDSET_MEDIA_STATUS) { + /* set the removable bit */ + info->InquiryData.DeviceTypeModifier = DEVICE_REMOVABLE; + info->DeviceFlags |= DF_REMOVABLE_MEDIA; + } + + /* Fill in vendor identification fields */ + src = (__be16 *)&id[ATA_ID_PROD]; + dest = (__u16*)info->InquiryData.VendorId; + for (i=0;i<4;i++) + dest[i] = be16_to_cpu(src[i]); + + src = (__be16 *)&id[ATA_ID_PROD + 8/2]; + dest = (__u16*)info->InquiryData.ProductId; + for (i=0;i<8;i++) + dest[i] = be16_to_cpu(src[i]); + + src = (__be16 *)&id[ATA_ID_FW_REV]; + dest = (__u16*)info->InquiryData.ProductRevisionLevel; + for (i=0;i<2;i++) + dest[i] = be16_to_cpu(src[i]); + + /* determine if it supports Media Status Notification */ + if (id[ATA_ID_COMMAND_SET_2] & COMMANDSET_MEDIA_STATUS) { + usb_stor_dbg(us, " Device supports Media Status Notification\n"); + + /* Indicate that it is enabled, even though it is not + * This allows the lock/unlock of the media to work + * correctly. + */ + info->DeviceFlags |= DF_MEDIA_STATUS_ENABLED; + } + else + info->DeviceFlags &= ~DF_MEDIA_STATUS_ENABLED; + + } + } else { + /* + * this must be an ATAPI device + * use an ATAPI protocol (Transparent SCSI) + */ + us->protocol_name = "Transparent SCSI"; + us->proto_handler = usb_stor_transparent_scsi_command; + + usb_stor_dbg(us, "Protocol changed to: %s\n", + us->protocol_name); + + /* Free driver structure */ + us->extra_destructor(info); + kfree(info); + us->extra = NULL; + us->extra_destructor = NULL; + } + } + + usb_stor_dbg(us, "Leaving isd200_get_inquiry_data %08X\n", retStatus); + + return(retStatus); +} + +/************************************************************************** + * isd200_scsi_to_ata + * + * Translate SCSI commands to ATA commands. + * + * RETURNS: + * 1 if the command needs to be sent to the transport layer + * 0 otherwise + */ +static int isd200_scsi_to_ata(struct scsi_cmnd *srb, struct us_data *us, + union ata_cdb * ataCdb) +{ + struct isd200_info *info = (struct isd200_info *)us->extra; + u16 *id = info->id; + int sendToTransport = 1; + unsigned char sectnum, head; + unsigned short cylinder; + unsigned long lba; + unsigned long blockCount; + unsigned char senseData[8] = { 0, 0, 0, 0, 0, 0, 0, 0 }; + + memset(ataCdb, 0, sizeof(union ata_cdb)); + + /* SCSI Command */ + switch (srb->cmnd[0]) { + case INQUIRY: + usb_stor_dbg(us, " ATA OUT - INQUIRY\n"); + + /* copy InquiryData */ + usb_stor_set_xfer_buf((unsigned char *) &info->InquiryData, + sizeof(info->InquiryData), srb); + srb->result = SAM_STAT_GOOD; + sendToTransport = 0; + break; + + case MODE_SENSE: + usb_stor_dbg(us, " ATA OUT - SCSIOP_MODE_SENSE\n"); + + /* Initialize the return buffer */ + usb_stor_set_xfer_buf(senseData, sizeof(senseData), srb); + + if (info->DeviceFlags & DF_MEDIA_STATUS_ENABLED) + { + ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand; + ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand; + ataCdb->generic.TransferBlockSize = 1; + ataCdb->generic.RegisterSelect = REG_COMMAND; + ataCdb->write.CommandByte = ATA_COMMAND_GET_MEDIA_STATUS; + isd200_srb_set_bufflen(srb, 0); + } else { + usb_stor_dbg(us, " Media Status not supported, just report okay\n"); + srb->result = SAM_STAT_GOOD; + sendToTransport = 0; + } + break; + + case TEST_UNIT_READY: + usb_stor_dbg(us, " ATA OUT - SCSIOP_TEST_UNIT_READY\n"); + + if (info->DeviceFlags & DF_MEDIA_STATUS_ENABLED) + { + ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand; + ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand; + ataCdb->generic.TransferBlockSize = 1; + ataCdb->generic.RegisterSelect = REG_COMMAND; + ataCdb->write.CommandByte = ATA_COMMAND_GET_MEDIA_STATUS; + isd200_srb_set_bufflen(srb, 0); + } else { + usb_stor_dbg(us, " Media Status not supported, just report okay\n"); + srb->result = SAM_STAT_GOOD; + sendToTransport = 0; + } + break; + + case READ_CAPACITY: + { + unsigned long capacity; + struct read_capacity_data readCapacityData; + + usb_stor_dbg(us, " ATA OUT - SCSIOP_READ_CAPACITY\n"); + + if (ata_id_has_lba(id)) + capacity = ata_id_u32(id, ATA_ID_LBA_CAPACITY) - 1; + else + capacity = (id[ATA_ID_HEADS] * id[ATA_ID_CYLS] * + id[ATA_ID_SECTORS]) - 1; + + readCapacityData.LogicalBlockAddress = cpu_to_be32(capacity); + readCapacityData.BytesPerBlock = cpu_to_be32(0x200); + + usb_stor_set_xfer_buf((unsigned char *) &readCapacityData, + sizeof(readCapacityData), srb); + srb->result = SAM_STAT_GOOD; + sendToTransport = 0; + } + break; + + case READ_10: + usb_stor_dbg(us, " ATA OUT - SCSIOP_READ\n"); + + lba = be32_to_cpu(*(__be32 *)&srb->cmnd[2]); + blockCount = (unsigned long)srb->cmnd[7]<<8 | (unsigned long)srb->cmnd[8]; + + if (ata_id_has_lba(id)) { + sectnum = (unsigned char)(lba); + cylinder = (unsigned short)(lba>>8); + head = ATA_ADDRESS_DEVHEAD_LBA_MODE | (unsigned char)(lba>>24 & 0x0F); + } else { + sectnum = (u8)((lba % id[ATA_ID_SECTORS]) + 1); + cylinder = (u16)(lba / (id[ATA_ID_SECTORS] * + id[ATA_ID_HEADS])); + head = (u8)((lba / id[ATA_ID_SECTORS]) % + id[ATA_ID_HEADS]); + } + ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand; + ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand; + ataCdb->generic.TransferBlockSize = 1; + ataCdb->generic.RegisterSelect = + REG_SECTOR_COUNT | REG_SECTOR_NUMBER | + REG_CYLINDER_LOW | REG_CYLINDER_HIGH | + REG_DEVICE_HEAD | REG_COMMAND; + ataCdb->write.SectorCountByte = (unsigned char)blockCount; + ataCdb->write.SectorNumberByte = sectnum; + ataCdb->write.CylinderHighByte = (unsigned char)(cylinder>>8); + ataCdb->write.CylinderLowByte = (unsigned char)cylinder; + ataCdb->write.DeviceHeadByte = (head | ATA_ADDRESS_DEVHEAD_STD); + ataCdb->write.CommandByte = ATA_CMD_PIO_READ; + break; + + case WRITE_10: + usb_stor_dbg(us, " ATA OUT - SCSIOP_WRITE\n"); + + lba = be32_to_cpu(*(__be32 *)&srb->cmnd[2]); + blockCount = (unsigned long)srb->cmnd[7]<<8 | (unsigned long)srb->cmnd[8]; + + if (ata_id_has_lba(id)) { + sectnum = (unsigned char)(lba); + cylinder = (unsigned short)(lba>>8); + head = ATA_ADDRESS_DEVHEAD_LBA_MODE | (unsigned char)(lba>>24 & 0x0F); + } else { + sectnum = (u8)((lba % id[ATA_ID_SECTORS]) + 1); + cylinder = (u16)(lba / (id[ATA_ID_SECTORS] * + id[ATA_ID_HEADS])); + head = (u8)((lba / id[ATA_ID_SECTORS]) % + id[ATA_ID_HEADS]); + } + ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand; + ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand; + ataCdb->generic.TransferBlockSize = 1; + ataCdb->generic.RegisterSelect = + REG_SECTOR_COUNT | REG_SECTOR_NUMBER | + REG_CYLINDER_LOW | REG_CYLINDER_HIGH | + REG_DEVICE_HEAD | REG_COMMAND; + ataCdb->write.SectorCountByte = (unsigned char)blockCount; + ataCdb->write.SectorNumberByte = sectnum; + ataCdb->write.CylinderHighByte = (unsigned char)(cylinder>>8); + ataCdb->write.CylinderLowByte = (unsigned char)cylinder; + ataCdb->write.DeviceHeadByte = (head | ATA_ADDRESS_DEVHEAD_STD); + ataCdb->write.CommandByte = ATA_CMD_PIO_WRITE; + break; + + case ALLOW_MEDIUM_REMOVAL: + usb_stor_dbg(us, " ATA OUT - SCSIOP_MEDIUM_REMOVAL\n"); + + if (info->DeviceFlags & DF_REMOVABLE_MEDIA) { + usb_stor_dbg(us, " srb->cmnd[4] = 0x%X\n", + srb->cmnd[4]); + + ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand; + ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand; + ataCdb->generic.TransferBlockSize = 1; + ataCdb->generic.RegisterSelect = REG_COMMAND; + ataCdb->write.CommandByte = (srb->cmnd[4] & 0x1) ? + ATA_CMD_MEDIA_LOCK : ATA_CMD_MEDIA_UNLOCK; + isd200_srb_set_bufflen(srb, 0); + } else { + usb_stor_dbg(us, " Not removeable media, just report okay\n"); + srb->result = SAM_STAT_GOOD; + sendToTransport = 0; + } + break; + + case START_STOP: + usb_stor_dbg(us, " ATA OUT - SCSIOP_START_STOP_UNIT\n"); + usb_stor_dbg(us, " srb->cmnd[4] = 0x%X\n", srb->cmnd[4]); + + if ((srb->cmnd[4] & 0x3) == 0x2) { + usb_stor_dbg(us, " Media Eject\n"); + ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand; + ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand; + ataCdb->generic.TransferBlockSize = 0; + ataCdb->generic.RegisterSelect = REG_COMMAND; + ataCdb->write.CommandByte = ATA_COMMAND_MEDIA_EJECT; + } else if ((srb->cmnd[4] & 0x3) == 0x1) { + usb_stor_dbg(us, " Get Media Status\n"); + ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand; + ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand; + ataCdb->generic.TransferBlockSize = 1; + ataCdb->generic.RegisterSelect = REG_COMMAND; + ataCdb->write.CommandByte = ATA_COMMAND_GET_MEDIA_STATUS; + isd200_srb_set_bufflen(srb, 0); + } else { + usb_stor_dbg(us, " Nothing to do, just report okay\n"); + srb->result = SAM_STAT_GOOD; + sendToTransport = 0; + } + break; + + default: + usb_stor_dbg(us, "Unsupported SCSI command - 0x%X\n", + srb->cmnd[0]); + srb->result = DID_ERROR << 16; + sendToTransport = 0; + break; + } + + return(sendToTransport); +} + + +/************************************************************************** + * isd200_free_info + * + * Frees the driver structure. + */ +static void isd200_free_info_ptrs(void *info_) +{ + struct isd200_info *info = (struct isd200_info *) info_; + + if (info) { + kfree(info->id); + kfree(info->RegsBuf); + kfree(info->srb.sense_buffer); + } +} + +/************************************************************************** + * isd200_init_info + * + * Allocates (if necessary) and initializes the driver structure. + * + * RETURNS: + * ISD status code + */ +static int isd200_init_info(struct us_data *us) +{ + int retStatus = ISD200_GOOD; + struct isd200_info *info; + + info = kzalloc(sizeof(struct isd200_info), GFP_KERNEL); + if (!info) + retStatus = ISD200_ERROR; + else { + info->id = kzalloc(ATA_ID_WORDS * 2, GFP_KERNEL); + info->RegsBuf = kmalloc(sizeof(info->ATARegs), GFP_KERNEL); + info->srb.sense_buffer = + kmalloc(SCSI_SENSE_BUFFERSIZE, GFP_KERNEL); + if (!info->id || !info->RegsBuf || !info->srb.sense_buffer) { + isd200_free_info_ptrs(info); + kfree(info); + retStatus = ISD200_ERROR; + } + } + + if (retStatus == ISD200_GOOD) { + us->extra = info; + us->extra_destructor = isd200_free_info_ptrs; + } + + return retStatus; +} + +/************************************************************************** + * Initialization for the ISD200 + */ + +static int isd200_Initialization(struct us_data *us) +{ + usb_stor_dbg(us, "ISD200 Initialization...\n"); + + /* Initialize ISD200 info struct */ + + if (isd200_init_info(us) == ISD200_ERROR) { + usb_stor_dbg(us, "ERROR Initializing ISD200 Info struct\n"); + } else { + /* Get device specific data */ + + if (isd200_get_inquiry_data(us) != ISD200_GOOD) + usb_stor_dbg(us, "ISD200 Initialization Failure\n"); + else + usb_stor_dbg(us, "ISD200 Initialization complete\n"); + } + + return 0; +} + + +/************************************************************************** + * Protocol and Transport for the ISD200 ASIC + * + * This protocol and transport are for ATA devices connected to an ISD200 + * ASIC. An ATAPI device that is connected as a slave device will be + * detected in the driver initialization function and the protocol will + * be changed to an ATAPI protocol (Transparent SCSI). + * + */ + +static void isd200_ata_command(struct scsi_cmnd *srb, struct us_data *us) +{ + int sendToTransport = 1, orig_bufflen; + union ata_cdb ataCdb; + + /* Make sure driver was initialized */ + + if (us->extra == NULL) + usb_stor_dbg(us, "ERROR Driver not initialized\n"); + + scsi_set_resid(srb, 0); + /* scsi_bufflen might change in protocol translation to ata */ + orig_bufflen = scsi_bufflen(srb); + sendToTransport = isd200_scsi_to_ata(srb, us, &ataCdb); + + /* send the command to the transport layer */ + if (sendToTransport) + isd200_invoke_transport(us, srb, &ataCdb); + + isd200_srb_set_bufflen(srb, orig_bufflen); +} + +static int isd200_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct us_data *us; + int result; + + result = usb_stor_probe1(&us, intf, id, + (id - isd200_usb_ids) + isd200_unusual_dev_list); + if (result) + return result; + + us->protocol_name = "ISD200 ATA/ATAPI"; + us->proto_handler = isd200_ata_command; + + result = usb_stor_probe2(us); + return result; +} + +static struct usb_driver isd200_driver = { + .name = "ums-isd200", + .probe = isd200_probe, + .disconnect = usb_stor_disconnect, + .suspend = usb_stor_suspend, + .resume = usb_stor_resume, + .reset_resume = usb_stor_reset_resume, + .pre_reset = usb_stor_pre_reset, + .post_reset = usb_stor_post_reset, + .id_table = isd200_usb_ids, + .soft_unbind = 1, + .no_dynamic_id = 1, +}; + +module_usb_driver(isd200_driver); diff --git a/kernel/drivers/usb/storage/jumpshot.c b/kernel/drivers/usb/storage/jumpshot.c new file mode 100644 index 000000000..563078be6 --- /dev/null +++ b/kernel/drivers/usb/storage/jumpshot.c @@ -0,0 +1,684 @@ +/* Driver for Lexar "Jumpshot" Compact Flash reader + * + * jumpshot driver v0.1: + * + * First release + * + * Current development and maintenance by: + * (c) 2000 Jimmie Mayfield (mayfield+usb@sackheads.org) + * + * Many thanks to Robert Baruch for the SanDisk SmartMedia reader driver + * which I used as a template for this driver. + * + * Some bugfixes and scatter-gather code by Gregory P. Smith + * (greg-usb@electricrain.com) + * + * Fix for media change by Joerg Schneider (js@joergschneider.com) + * + * Developed with the assistance of: + * + * (C) 2002 Alan Stern <stern@rowland.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + + /* + * This driver attempts to support the Lexar Jumpshot USB CompactFlash + * reader. Like many other USB CompactFlash readers, the Jumpshot contains + * a USB-to-ATA chip. + * + * This driver supports reading and writing. If you're truly paranoid, + * however, you can force the driver into a write-protected state by setting + * the WP enable bits in jumpshot_handle_mode_sense. See the comments + * in that routine. + */ + +#include <linux/errno.h> +#include <linux/module.h> +#include <linux/slab.h> + +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> + +#include "usb.h" +#include "transport.h" +#include "protocol.h" +#include "debug.h" + + +MODULE_DESCRIPTION("Driver for Lexar \"Jumpshot\" Compact Flash reader"); +MODULE_AUTHOR("Jimmie Mayfield <mayfield+usb@sackheads.org>"); +MODULE_LICENSE("GPL"); + +/* + * The table of devices + */ +#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ + vendorName, productName, useProtocol, useTransport, \ + initFunction, flags) \ +{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ + .driver_info = (flags) } + +static struct usb_device_id jumpshot_usb_ids[] = { +# include "unusual_jumpshot.h" + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, jumpshot_usb_ids); + +#undef UNUSUAL_DEV + +/* + * The flags table + */ +#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \ + vendor_name, product_name, use_protocol, use_transport, \ + init_function, Flags) \ +{ \ + .vendorName = vendor_name, \ + .productName = product_name, \ + .useProtocol = use_protocol, \ + .useTransport = use_transport, \ + .initFunction = init_function, \ +} + +static struct us_unusual_dev jumpshot_unusual_dev_list[] = { +# include "unusual_jumpshot.h" + { } /* Terminating entry */ +}; + +#undef UNUSUAL_DEV + + +struct jumpshot_info { + unsigned long sectors; /* total sector count */ + unsigned long ssize; /* sector size in bytes */ + + /* the following aren't used yet */ + unsigned char sense_key; + unsigned long sense_asc; /* additional sense code */ + unsigned long sense_ascq; /* additional sense code qualifier */ +}; + +static inline int jumpshot_bulk_read(struct us_data *us, + unsigned char *data, + unsigned int len) +{ + if (len == 0) + return USB_STOR_XFER_GOOD; + + usb_stor_dbg(us, "len = %d\n", len); + return usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, + data, len, NULL); +} + + +static inline int jumpshot_bulk_write(struct us_data *us, + unsigned char *data, + unsigned int len) +{ + if (len == 0) + return USB_STOR_XFER_GOOD; + + usb_stor_dbg(us, "len = %d\n", len); + return usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, + data, len, NULL); +} + + +static int jumpshot_get_status(struct us_data *us) +{ + int rc; + + if (!us) + return USB_STOR_TRANSPORT_ERROR; + + // send the setup + rc = usb_stor_ctrl_transfer(us, us->recv_ctrl_pipe, + 0, 0xA0, 0, 7, us->iobuf, 1); + + if (rc != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + if (us->iobuf[0] != 0x50) { + usb_stor_dbg(us, "0x%2x\n", us->iobuf[0]); + return USB_STOR_TRANSPORT_ERROR; + } + + return USB_STOR_TRANSPORT_GOOD; +} + +static int jumpshot_read_data(struct us_data *us, + struct jumpshot_info *info, + u32 sector, + u32 sectors) +{ + unsigned char *command = us->iobuf; + unsigned char *buffer; + unsigned char thistime; + unsigned int totallen, alloclen; + int len, result; + unsigned int sg_offset = 0; + struct scatterlist *sg = NULL; + + // we're working in LBA mode. according to the ATA spec, + // we can support up to 28-bit addressing. I don't know if Jumpshot + // supports beyond 24-bit addressing. It's kind of hard to test + // since it requires > 8GB CF card. + + if (sector > 0x0FFFFFFF) + return USB_STOR_TRANSPORT_ERROR; + + totallen = sectors * info->ssize; + + // Since we don't read more than 64 KB at a time, we have to create + // a bounce buffer and move the data a piece at a time between the + // bounce buffer and the actual transfer buffer. + + alloclen = min(totallen, 65536u); + buffer = kmalloc(alloclen, GFP_NOIO); + if (buffer == NULL) + return USB_STOR_TRANSPORT_ERROR; + + do { + // loop, never allocate or transfer more than 64k at once + // (min(128k, 255*info->ssize) is the real limit) + len = min(totallen, alloclen); + thistime = (len / info->ssize) & 0xff; + + command[0] = 0; + command[1] = thistime; + command[2] = sector & 0xFF; + command[3] = (sector >> 8) & 0xFF; + command[4] = (sector >> 16) & 0xFF; + + command[5] = 0xE0 | ((sector >> 24) & 0x0F); + command[6] = 0x20; + + // send the setup + command + result = usb_stor_ctrl_transfer(us, us->send_ctrl_pipe, + 0, 0x20, 0, 1, command, 7); + if (result != USB_STOR_XFER_GOOD) + goto leave; + + // read the result + result = jumpshot_bulk_read(us, buffer, len); + if (result != USB_STOR_XFER_GOOD) + goto leave; + + usb_stor_dbg(us, "%d bytes\n", len); + + // Store the data in the transfer buffer + usb_stor_access_xfer_buf(buffer, len, us->srb, + &sg, &sg_offset, TO_XFER_BUF); + + sector += thistime; + totallen -= len; + } while (totallen > 0); + + kfree(buffer); + return USB_STOR_TRANSPORT_GOOD; + + leave: + kfree(buffer); + return USB_STOR_TRANSPORT_ERROR; +} + + +static int jumpshot_write_data(struct us_data *us, + struct jumpshot_info *info, + u32 sector, + u32 sectors) +{ + unsigned char *command = us->iobuf; + unsigned char *buffer; + unsigned char thistime; + unsigned int totallen, alloclen; + int len, result, waitcount; + unsigned int sg_offset = 0; + struct scatterlist *sg = NULL; + + // we're working in LBA mode. according to the ATA spec, + // we can support up to 28-bit addressing. I don't know if Jumpshot + // supports beyond 24-bit addressing. It's kind of hard to test + // since it requires > 8GB CF card. + // + if (sector > 0x0FFFFFFF) + return USB_STOR_TRANSPORT_ERROR; + + totallen = sectors * info->ssize; + + // Since we don't write more than 64 KB at a time, we have to create + // a bounce buffer and move the data a piece at a time between the + // bounce buffer and the actual transfer buffer. + + alloclen = min(totallen, 65536u); + buffer = kmalloc(alloclen, GFP_NOIO); + if (buffer == NULL) + return USB_STOR_TRANSPORT_ERROR; + + do { + // loop, never allocate or transfer more than 64k at once + // (min(128k, 255*info->ssize) is the real limit) + + len = min(totallen, alloclen); + thistime = (len / info->ssize) & 0xff; + + // Get the data from the transfer buffer + usb_stor_access_xfer_buf(buffer, len, us->srb, + &sg, &sg_offset, FROM_XFER_BUF); + + command[0] = 0; + command[1] = thistime; + command[2] = sector & 0xFF; + command[3] = (sector >> 8) & 0xFF; + command[4] = (sector >> 16) & 0xFF; + + command[5] = 0xE0 | ((sector >> 24) & 0x0F); + command[6] = 0x30; + + // send the setup + command + result = usb_stor_ctrl_transfer(us, us->send_ctrl_pipe, + 0, 0x20, 0, 1, command, 7); + if (result != USB_STOR_XFER_GOOD) + goto leave; + + // send the data + result = jumpshot_bulk_write(us, buffer, len); + if (result != USB_STOR_XFER_GOOD) + goto leave; + + // read the result. apparently the bulk write can complete + // before the jumpshot drive is finished writing. so we loop + // here until we get a good return code + waitcount = 0; + do { + result = jumpshot_get_status(us); + if (result != USB_STOR_TRANSPORT_GOOD) { + // I have not experimented to find the smallest value. + // + msleep(50); + } + } while ((result != USB_STOR_TRANSPORT_GOOD) && (waitcount < 10)); + + if (result != USB_STOR_TRANSPORT_GOOD) + usb_stor_dbg(us, "Gah! Waitcount = 10. Bad write!?\n"); + + sector += thistime; + totallen -= len; + } while (totallen > 0); + + kfree(buffer); + return result; + + leave: + kfree(buffer); + return USB_STOR_TRANSPORT_ERROR; +} + +static int jumpshot_id_device(struct us_data *us, + struct jumpshot_info *info) +{ + unsigned char *command = us->iobuf; + unsigned char *reply; + int rc; + + if (!info) + return USB_STOR_TRANSPORT_ERROR; + + command[0] = 0xE0; + command[1] = 0xEC; + reply = kmalloc(512, GFP_NOIO); + if (!reply) + return USB_STOR_TRANSPORT_ERROR; + + // send the setup + rc = usb_stor_ctrl_transfer(us, us->send_ctrl_pipe, + 0, 0x20, 0, 6, command, 2); + + if (rc != USB_STOR_XFER_GOOD) { + usb_stor_dbg(us, "Gah! send_control for read_capacity failed\n"); + rc = USB_STOR_TRANSPORT_ERROR; + goto leave; + } + + // read the reply + rc = jumpshot_bulk_read(us, reply, 512); + if (rc != USB_STOR_XFER_GOOD) { + rc = USB_STOR_TRANSPORT_ERROR; + goto leave; + } + + info->sectors = ((u32)(reply[117]) << 24) | + ((u32)(reply[116]) << 16) | + ((u32)(reply[115]) << 8) | + ((u32)(reply[114]) ); + + rc = USB_STOR_TRANSPORT_GOOD; + + leave: + kfree(reply); + return rc; +} + +static int jumpshot_handle_mode_sense(struct us_data *us, + struct scsi_cmnd * srb, + int sense_6) +{ + static unsigned char rw_err_page[12] = { + 0x1, 0xA, 0x21, 1, 0, 0, 0, 0, 1, 0, 0, 0 + }; + static unsigned char cache_page[12] = { + 0x8, 0xA, 0x1, 0, 0, 0, 0, 0, 0, 0, 0, 0 + }; + static unsigned char rbac_page[12] = { + 0x1B, 0xA, 0, 0x81, 0, 0, 0, 0, 0, 0, 0, 0 + }; + static unsigned char timer_page[8] = { + 0x1C, 0x6, 0, 0, 0, 0 + }; + unsigned char pc, page_code; + unsigned int i = 0; + struct jumpshot_info *info = (struct jumpshot_info *) (us->extra); + unsigned char *ptr = us->iobuf; + + pc = srb->cmnd[2] >> 6; + page_code = srb->cmnd[2] & 0x3F; + + switch (pc) { + case 0x0: + usb_stor_dbg(us, "Current values\n"); + break; + case 0x1: + usb_stor_dbg(us, "Changeable values\n"); + break; + case 0x2: + usb_stor_dbg(us, "Default values\n"); + break; + case 0x3: + usb_stor_dbg(us, "Saves values\n"); + break; + } + + memset(ptr, 0, 8); + if (sense_6) { + ptr[2] = 0x00; // WP enable: 0x80 + i = 4; + } else { + ptr[3] = 0x00; // WP enable: 0x80 + i = 8; + } + + switch (page_code) { + case 0x0: + // vendor-specific mode + info->sense_key = 0x05; + info->sense_asc = 0x24; + info->sense_ascq = 0x00; + return USB_STOR_TRANSPORT_FAILED; + + case 0x1: + memcpy(ptr + i, rw_err_page, sizeof(rw_err_page)); + i += sizeof(rw_err_page); + break; + + case 0x8: + memcpy(ptr + i, cache_page, sizeof(cache_page)); + i += sizeof(cache_page); + break; + + case 0x1B: + memcpy(ptr + i, rbac_page, sizeof(rbac_page)); + i += sizeof(rbac_page); + break; + + case 0x1C: + memcpy(ptr + i, timer_page, sizeof(timer_page)); + i += sizeof(timer_page); + break; + + case 0x3F: + memcpy(ptr + i, timer_page, sizeof(timer_page)); + i += sizeof(timer_page); + memcpy(ptr + i, rbac_page, sizeof(rbac_page)); + i += sizeof(rbac_page); + memcpy(ptr + i, cache_page, sizeof(cache_page)); + i += sizeof(cache_page); + memcpy(ptr + i, rw_err_page, sizeof(rw_err_page)); + i += sizeof(rw_err_page); + break; + } + + if (sense_6) + ptr[0] = i - 1; + else + ((__be16 *) ptr)[0] = cpu_to_be16(i - 2); + usb_stor_set_xfer_buf(ptr, i, srb); + + return USB_STOR_TRANSPORT_GOOD; +} + + +static void jumpshot_info_destructor(void *extra) +{ + // this routine is a placeholder... + // currently, we don't allocate any extra blocks so we're okay +} + + + +// Transport for the Lexar 'Jumpshot' +// +static int jumpshot_transport(struct scsi_cmnd *srb, struct us_data *us) +{ + struct jumpshot_info *info; + int rc; + unsigned long block, blocks; + unsigned char *ptr = us->iobuf; + static unsigned char inquiry_response[8] = { + 0x00, 0x80, 0x00, 0x01, 0x1F, 0x00, 0x00, 0x00 + }; + + if (!us->extra) { + us->extra = kzalloc(sizeof(struct jumpshot_info), GFP_NOIO); + if (!us->extra) + return USB_STOR_TRANSPORT_ERROR; + + us->extra_destructor = jumpshot_info_destructor; + } + + info = (struct jumpshot_info *) (us->extra); + + if (srb->cmnd[0] == INQUIRY) { + usb_stor_dbg(us, "INQUIRY - Returning bogus response\n"); + memcpy(ptr, inquiry_response, sizeof(inquiry_response)); + fill_inquiry_response(us, ptr, 36); + return USB_STOR_TRANSPORT_GOOD; + } + + if (srb->cmnd[0] == READ_CAPACITY) { + info->ssize = 0x200; // hard coded 512 byte sectors as per ATA spec + + rc = jumpshot_get_status(us); + if (rc != USB_STOR_TRANSPORT_GOOD) + return rc; + + rc = jumpshot_id_device(us, info); + if (rc != USB_STOR_TRANSPORT_GOOD) + return rc; + + usb_stor_dbg(us, "READ_CAPACITY: %ld sectors, %ld bytes per sector\n", + info->sectors, info->ssize); + + // build the reply + // + ((__be32 *) ptr)[0] = cpu_to_be32(info->sectors - 1); + ((__be32 *) ptr)[1] = cpu_to_be32(info->ssize); + usb_stor_set_xfer_buf(ptr, 8, srb); + + return USB_STOR_TRANSPORT_GOOD; + } + + if (srb->cmnd[0] == MODE_SELECT_10) { + usb_stor_dbg(us, "Gah! MODE_SELECT_10\n"); + return USB_STOR_TRANSPORT_ERROR; + } + + if (srb->cmnd[0] == READ_10) { + block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) | + ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5])); + + blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8])); + + usb_stor_dbg(us, "READ_10: read block 0x%04lx count %ld\n", + block, blocks); + return jumpshot_read_data(us, info, block, blocks); + } + + if (srb->cmnd[0] == READ_12) { + // I don't think we'll ever see a READ_12 but support it anyway... + // + block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) | + ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5])); + + blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) | + ((u32)(srb->cmnd[8]) << 8) | ((u32)(srb->cmnd[9])); + + usb_stor_dbg(us, "READ_12: read block 0x%04lx count %ld\n", + block, blocks); + return jumpshot_read_data(us, info, block, blocks); + } + + if (srb->cmnd[0] == WRITE_10) { + block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) | + ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5])); + + blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8])); + + usb_stor_dbg(us, "WRITE_10: write block 0x%04lx count %ld\n", + block, blocks); + return jumpshot_write_data(us, info, block, blocks); + } + + if (srb->cmnd[0] == WRITE_12) { + // I don't think we'll ever see a WRITE_12 but support it anyway... + // + block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) | + ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5])); + + blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) | + ((u32)(srb->cmnd[8]) << 8) | ((u32)(srb->cmnd[9])); + + usb_stor_dbg(us, "WRITE_12: write block 0x%04lx count %ld\n", + block, blocks); + return jumpshot_write_data(us, info, block, blocks); + } + + + if (srb->cmnd[0] == TEST_UNIT_READY) { + usb_stor_dbg(us, "TEST_UNIT_READY\n"); + return jumpshot_get_status(us); + } + + if (srb->cmnd[0] == REQUEST_SENSE) { + usb_stor_dbg(us, "REQUEST_SENSE\n"); + + memset(ptr, 0, 18); + ptr[0] = 0xF0; + ptr[2] = info->sense_key; + ptr[7] = 11; + ptr[12] = info->sense_asc; + ptr[13] = info->sense_ascq; + usb_stor_set_xfer_buf(ptr, 18, srb); + + return USB_STOR_TRANSPORT_GOOD; + } + + if (srb->cmnd[0] == MODE_SENSE) { + usb_stor_dbg(us, "MODE_SENSE_6 detected\n"); + return jumpshot_handle_mode_sense(us, srb, 1); + } + + if (srb->cmnd[0] == MODE_SENSE_10) { + usb_stor_dbg(us, "MODE_SENSE_10 detected\n"); + return jumpshot_handle_mode_sense(us, srb, 0); + } + + if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) { + // sure. whatever. not like we can stop the user from popping + // the media out of the device (no locking doors, etc) + // + return USB_STOR_TRANSPORT_GOOD; + } + + if (srb->cmnd[0] == START_STOP) { + /* this is used by sd.c'check_scsidisk_media_change to detect + media change */ + usb_stor_dbg(us, "START_STOP\n"); + /* the first jumpshot_id_device after a media change returns + an error (determined experimentally) */ + rc = jumpshot_id_device(us, info); + if (rc == USB_STOR_TRANSPORT_GOOD) { + info->sense_key = NO_SENSE; + srb->result = SUCCESS; + } else { + info->sense_key = UNIT_ATTENTION; + srb->result = SAM_STAT_CHECK_CONDITION; + } + return rc; + } + + usb_stor_dbg(us, "Gah! Unknown command: %d (0x%x)\n", + srb->cmnd[0], srb->cmnd[0]); + info->sense_key = 0x05; + info->sense_asc = 0x20; + info->sense_ascq = 0x00; + return USB_STOR_TRANSPORT_FAILED; +} + +static int jumpshot_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct us_data *us; + int result; + + result = usb_stor_probe1(&us, intf, id, + (id - jumpshot_usb_ids) + jumpshot_unusual_dev_list); + if (result) + return result; + + us->transport_name = "Lexar Jumpshot Control/Bulk"; + us->transport = jumpshot_transport; + us->transport_reset = usb_stor_Bulk_reset; + us->max_lun = 1; + + result = usb_stor_probe2(us); + return result; +} + +static struct usb_driver jumpshot_driver = { + .name = "ums-jumpshot", + .probe = jumpshot_probe, + .disconnect = usb_stor_disconnect, + .suspend = usb_stor_suspend, + .resume = usb_stor_resume, + .reset_resume = usb_stor_reset_resume, + .pre_reset = usb_stor_pre_reset, + .post_reset = usb_stor_post_reset, + .id_table = jumpshot_usb_ids, + .soft_unbind = 1, + .no_dynamic_id = 1, +}; + +module_usb_driver(jumpshot_driver); diff --git a/kernel/drivers/usb/storage/karma.c b/kernel/drivers/usb/storage/karma.c new file mode 100644 index 000000000..94d16ee5e --- /dev/null +++ b/kernel/drivers/usb/storage/karma.c @@ -0,0 +1,236 @@ +/* Driver for Rio Karma + * + * (c) 2006 Bob Copeland <me@bobcopeland.com> + * (c) 2006 Keith Bennett <keith@mcs.st-and.ac.uk> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/slab.h> + +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_device.h> + +#include "usb.h" +#include "transport.h" +#include "debug.h" + +MODULE_DESCRIPTION("Driver for Rio Karma"); +MODULE_AUTHOR("Bob Copeland <me@bobcopeland.com>, Keith Bennett <keith@mcs.st-and.ac.uk>"); +MODULE_LICENSE("GPL"); + +#define RIO_PREFIX "RIOP\x00" +#define RIO_PREFIX_LEN 5 +#define RIO_SEND_LEN 40 +#define RIO_RECV_LEN 0x200 + +#define RIO_ENTER_STORAGE 0x1 +#define RIO_LEAVE_STORAGE 0x2 +#define RIO_RESET 0xC + +struct karma_data { + int in_storage; + char *recv; +}; + +static int rio_karma_init(struct us_data *us); + + +/* + * The table of devices + */ +#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ + vendorName, productName, useProtocol, useTransport, \ + initFunction, flags) \ +{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ + .driver_info = (flags) } + +static struct usb_device_id karma_usb_ids[] = { +# include "unusual_karma.h" + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, karma_usb_ids); + +#undef UNUSUAL_DEV + +/* + * The flags table + */ +#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \ + vendor_name, product_name, use_protocol, use_transport, \ + init_function, Flags) \ +{ \ + .vendorName = vendor_name, \ + .productName = product_name, \ + .useProtocol = use_protocol, \ + .useTransport = use_transport, \ + .initFunction = init_function, \ +} + +static struct us_unusual_dev karma_unusual_dev_list[] = { +# include "unusual_karma.h" + { } /* Terminating entry */ +}; + +#undef UNUSUAL_DEV + + +/* + * Send commands to Rio Karma. + * + * For each command we send 40 bytes starting 'RIOP\0' followed by + * the command number and a sequence number, which the device will ack + * with a 512-byte packet with the high four bits set and everything + * else null. Then we send 'RIOP\x80' followed by a zero and the + * sequence number, until byte 5 in the response repeats the sequence + * number. + */ +static int rio_karma_send_command(char cmd, struct us_data *us) +{ + int result, partial; + unsigned long timeout; + static unsigned char seq = 1; + struct karma_data *data = (struct karma_data *) us->extra; + + usb_stor_dbg(us, "sending command %04x\n", cmd); + memset(us->iobuf, 0, RIO_SEND_LEN); + memcpy(us->iobuf, RIO_PREFIX, RIO_PREFIX_LEN); + us->iobuf[5] = cmd; + us->iobuf[6] = seq; + + timeout = jiffies + msecs_to_jiffies(6000); + for (;;) { + result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, + us->iobuf, RIO_SEND_LEN, &partial); + if (result != USB_STOR_XFER_GOOD) + goto err; + + result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, + data->recv, RIO_RECV_LEN, &partial); + if (result != USB_STOR_XFER_GOOD) + goto err; + + if (data->recv[5] == seq) + break; + + if (time_after(jiffies, timeout)) + goto err; + + us->iobuf[4] = 0x80; + us->iobuf[5] = 0; + msleep(50); + } + + seq++; + if (seq == 0) + seq = 1; + + usb_stor_dbg(us, "sent command %04x\n", cmd); + return 0; +err: + usb_stor_dbg(us, "command %04x failed\n", cmd); + return USB_STOR_TRANSPORT_FAILED; +} + +/* + * Trap START_STOP and READ_10 to leave/re-enter storage mode. + * Everything else is propagated to the normal bulk layer. + */ +static int rio_karma_transport(struct scsi_cmnd *srb, struct us_data *us) +{ + int ret; + struct karma_data *data = (struct karma_data *) us->extra; + + if (srb->cmnd[0] == READ_10 && !data->in_storage) { + ret = rio_karma_send_command(RIO_ENTER_STORAGE, us); + if (ret) + return ret; + + data->in_storage = 1; + return usb_stor_Bulk_transport(srb, us); + } else if (srb->cmnd[0] == START_STOP) { + ret = rio_karma_send_command(RIO_LEAVE_STORAGE, us); + if (ret) + return ret; + + data->in_storage = 0; + return rio_karma_send_command(RIO_RESET, us); + } + return usb_stor_Bulk_transport(srb, us); +} + +static void rio_karma_destructor(void *extra) +{ + struct karma_data *data = (struct karma_data *) extra; + kfree(data->recv); +} + +static int rio_karma_init(struct us_data *us) +{ + int ret = 0; + struct karma_data *data = kzalloc(sizeof(struct karma_data), GFP_NOIO); + if (!data) + goto out; + + data->recv = kmalloc(RIO_RECV_LEN, GFP_NOIO); + if (!data->recv) { + kfree(data); + goto out; + } + + us->extra = data; + us->extra_destructor = rio_karma_destructor; + ret = rio_karma_send_command(RIO_ENTER_STORAGE, us); + data->in_storage = (ret == 0); +out: + return ret; +} + +static int karma_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct us_data *us; + int result; + + result = usb_stor_probe1(&us, intf, id, + (id - karma_usb_ids) + karma_unusual_dev_list); + if (result) + return result; + + us->transport_name = "Rio Karma/Bulk"; + us->transport = rio_karma_transport; + us->transport_reset = usb_stor_Bulk_reset; + + result = usb_stor_probe2(us); + return result; +} + +static struct usb_driver karma_driver = { + .name = "ums-karma", + .probe = karma_probe, + .disconnect = usb_stor_disconnect, + .suspend = usb_stor_suspend, + .resume = usb_stor_resume, + .reset_resume = usb_stor_reset_resume, + .pre_reset = usb_stor_pre_reset, + .post_reset = usb_stor_post_reset, + .id_table = karma_usb_ids, + .soft_unbind = 1, + .no_dynamic_id = 1, +}; + +module_usb_driver(karma_driver); diff --git a/kernel/drivers/usb/storage/onetouch.c b/kernel/drivers/usb/storage/onetouch.c new file mode 100644 index 000000000..74e2aa23b --- /dev/null +++ b/kernel/drivers/usb/storage/onetouch.c @@ -0,0 +1,317 @@ +/* + * Support for the Maxtor OneTouch USB hard drive's button + * + * Current development and maintenance by: + * Copyright (c) 2005 Nick Sillik <n.sillik@temple.edu> + * + * Initial work by: + * Copyright (c) 2003 Erik Thyren <erth7411@student.uu.se> + * + * Based on usbmouse.c (Vojtech Pavlik) and xpad.c (Marko Friedemann) + * + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <linux/kernel.h> +#include <linux/input.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/usb/input.h> +#include "usb.h" +#include "debug.h" + +MODULE_DESCRIPTION("Maxtor USB OneTouch hard drive button driver"); +MODULE_AUTHOR("Nick Sillik <n.sillik@temple.edu>"); +MODULE_LICENSE("GPL"); + +#define ONETOUCH_PKT_LEN 0x02 +#define ONETOUCH_BUTTON KEY_PROG1 + +static int onetouch_connect_input(struct us_data *ss); +static void onetouch_release_input(void *onetouch_); + +struct usb_onetouch { + char name[128]; + char phys[64]; + struct input_dev *dev; /* input device interface */ + struct usb_device *udev; /* usb device */ + + struct urb *irq; /* urb for interrupt in report */ + unsigned char *data; /* input data */ + dma_addr_t data_dma; + unsigned int is_open:1; +}; + + +/* + * The table of devices + */ +#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ + vendorName, productName, useProtocol, useTransport, \ + initFunction, flags) \ +{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ + .driver_info = (flags) } + +static struct usb_device_id onetouch_usb_ids[] = { +# include "unusual_onetouch.h" + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, onetouch_usb_ids); + +#undef UNUSUAL_DEV + +/* + * The flags table + */ +#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \ + vendor_name, product_name, use_protocol, use_transport, \ + init_function, Flags) \ +{ \ + .vendorName = vendor_name, \ + .productName = product_name, \ + .useProtocol = use_protocol, \ + .useTransport = use_transport, \ + .initFunction = init_function, \ +} + +static struct us_unusual_dev onetouch_unusual_dev_list[] = { +# include "unusual_onetouch.h" + { } /* Terminating entry */ +}; + +#undef UNUSUAL_DEV + + +static void usb_onetouch_irq(struct urb *urb) +{ + struct usb_onetouch *onetouch = urb->context; + signed char *data = onetouch->data; + struct input_dev *dev = onetouch->dev; + int status = urb->status; + int retval; + + switch (status) { + case 0: /* success */ + break; + case -ECONNRESET: /* unlink */ + case -ENOENT: + case -ESHUTDOWN: + return; + /* -EPIPE: should clear the halt */ + default: /* error */ + goto resubmit; + } + + input_report_key(dev, ONETOUCH_BUTTON, data[0] & 0x02); + input_sync(dev); + +resubmit: + retval = usb_submit_urb (urb, GFP_ATOMIC); + if (retval) + dev_err(&dev->dev, "can't resubmit intr, %s-%s/input0, " + "retval %d\n", onetouch->udev->bus->bus_name, + onetouch->udev->devpath, retval); +} + +static int usb_onetouch_open(struct input_dev *dev) +{ + struct usb_onetouch *onetouch = input_get_drvdata(dev); + + onetouch->is_open = 1; + onetouch->irq->dev = onetouch->udev; + if (usb_submit_urb(onetouch->irq, GFP_KERNEL)) { + dev_err(&dev->dev, "usb_submit_urb failed\n"); + return -EIO; + } + + return 0; +} + +static void usb_onetouch_close(struct input_dev *dev) +{ + struct usb_onetouch *onetouch = input_get_drvdata(dev); + + usb_kill_urb(onetouch->irq); + onetouch->is_open = 0; +} + +#ifdef CONFIG_PM +static void usb_onetouch_pm_hook(struct us_data *us, int action) +{ + struct usb_onetouch *onetouch = (struct usb_onetouch *) us->extra; + + if (onetouch->is_open) { + switch (action) { + case US_SUSPEND: + usb_kill_urb(onetouch->irq); + break; + case US_RESUME: + if (usb_submit_urb(onetouch->irq, GFP_NOIO) != 0) + dev_err(&onetouch->irq->dev->dev, + "usb_submit_urb failed\n"); + break; + default: + break; + } + } +} +#endif /* CONFIG_PM */ + +static int onetouch_connect_input(struct us_data *ss) +{ + struct usb_device *udev = ss->pusb_dev; + struct usb_host_interface *interface; + struct usb_endpoint_descriptor *endpoint; + struct usb_onetouch *onetouch; + struct input_dev *input_dev; + int pipe, maxp; + int error = -ENOMEM; + + interface = ss->pusb_intf->cur_altsetting; + + if (interface->desc.bNumEndpoints != 3) + return -ENODEV; + + endpoint = &interface->endpoint[2].desc; + if (!usb_endpoint_is_int_in(endpoint)) + return -ENODEV; + + pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress); + maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe)); + maxp = min(maxp, ONETOUCH_PKT_LEN); + + onetouch = kzalloc(sizeof(struct usb_onetouch), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!onetouch || !input_dev) + goto fail1; + + onetouch->data = usb_alloc_coherent(udev, ONETOUCH_PKT_LEN, + GFP_KERNEL, &onetouch->data_dma); + if (!onetouch->data) + goto fail1; + + onetouch->irq = usb_alloc_urb(0, GFP_KERNEL); + if (!onetouch->irq) + goto fail2; + + onetouch->udev = udev; + onetouch->dev = input_dev; + + if (udev->manufacturer) + strlcpy(onetouch->name, udev->manufacturer, + sizeof(onetouch->name)); + if (udev->product) { + if (udev->manufacturer) + strlcat(onetouch->name, " ", sizeof(onetouch->name)); + strlcat(onetouch->name, udev->product, sizeof(onetouch->name)); + } + + if (!strlen(onetouch->name)) + snprintf(onetouch->name, sizeof(onetouch->name), + "Maxtor Onetouch %04x:%04x", + le16_to_cpu(udev->descriptor.idVendor), + le16_to_cpu(udev->descriptor.idProduct)); + + usb_make_path(udev, onetouch->phys, sizeof(onetouch->phys)); + strlcat(onetouch->phys, "/input0", sizeof(onetouch->phys)); + + input_dev->name = onetouch->name; + input_dev->phys = onetouch->phys; + usb_to_input_id(udev, &input_dev->id); + input_dev->dev.parent = &udev->dev; + + set_bit(EV_KEY, input_dev->evbit); + set_bit(ONETOUCH_BUTTON, input_dev->keybit); + clear_bit(0, input_dev->keybit); + + input_set_drvdata(input_dev, onetouch); + + input_dev->open = usb_onetouch_open; + input_dev->close = usb_onetouch_close; + + usb_fill_int_urb(onetouch->irq, udev, pipe, onetouch->data, maxp, + usb_onetouch_irq, onetouch, endpoint->bInterval); + onetouch->irq->transfer_dma = onetouch->data_dma; + onetouch->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + + ss->extra_destructor = onetouch_release_input; + ss->extra = onetouch; +#ifdef CONFIG_PM + ss->suspend_resume_hook = usb_onetouch_pm_hook; +#endif + + error = input_register_device(onetouch->dev); + if (error) + goto fail3; + + return 0; + + fail3: usb_free_urb(onetouch->irq); + fail2: usb_free_coherent(udev, ONETOUCH_PKT_LEN, + onetouch->data, onetouch->data_dma); + fail1: kfree(onetouch); + input_free_device(input_dev); + return error; +} + +static void onetouch_release_input(void *onetouch_) +{ + struct usb_onetouch *onetouch = (struct usb_onetouch *) onetouch_; + + if (onetouch) { + usb_kill_urb(onetouch->irq); + input_unregister_device(onetouch->dev); + usb_free_urb(onetouch->irq); + usb_free_coherent(onetouch->udev, ONETOUCH_PKT_LEN, + onetouch->data, onetouch->data_dma); + } +} + +static int onetouch_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct us_data *us; + int result; + + result = usb_stor_probe1(&us, intf, id, + (id - onetouch_usb_ids) + onetouch_unusual_dev_list); + if (result) + return result; + + /* Use default transport and protocol */ + + result = usb_stor_probe2(us); + return result; +} + +static struct usb_driver onetouch_driver = { + .name = "ums-onetouch", + .probe = onetouch_probe, + .disconnect = usb_stor_disconnect, + .suspend = usb_stor_suspend, + .resume = usb_stor_resume, + .reset_resume = usb_stor_reset_resume, + .pre_reset = usb_stor_pre_reset, + .post_reset = usb_stor_post_reset, + .id_table = onetouch_usb_ids, + .soft_unbind = 1, + .no_dynamic_id = 1, +}; + +module_usb_driver(onetouch_driver); diff --git a/kernel/drivers/usb/storage/option_ms.c b/kernel/drivers/usb/storage/option_ms.c new file mode 100644 index 000000000..b2b35b1d7 --- /dev/null +++ b/kernel/drivers/usb/storage/option_ms.c @@ -0,0 +1,171 @@ +/* + * Driver for Option High Speed Mobile Devices. + * + * (c) 2008 Dan Williams <dcbw@redhat.com> + * + * Inspiration taken from sierra_ms.c by Kevin Lloyd <klloyd@sierrawireless.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/usb.h> +#include <linux/slab.h> +#include <linux/module.h> + +#include "usb.h" +#include "transport.h" +#include "option_ms.h" +#include "debug.h" + +#define ZCD_FORCE_MODEM 0x01 +#define ZCD_ALLOW_MS 0x02 + +static unsigned int option_zero_cd = ZCD_FORCE_MODEM; +module_param(option_zero_cd, uint, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(option_zero_cd, "ZeroCD mode (1=Force Modem (default)," + " 2=Allow CD-Rom"); + +#define RESPONSE_LEN 1024 + +static int option_rezero(struct us_data *us) +{ + const unsigned char rezero_msg[] = { + 0x55, 0x53, 0x42, 0x43, 0x78, 0x56, 0x34, 0x12, + 0x01, 0x00, 0x00, 0x00, 0x80, 0x00, 0x06, 0x01, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 + }; + char *buffer; + int result; + + usb_stor_dbg(us, "Option MS: %s\n", "DEVICE MODE SWITCH"); + + buffer = kzalloc(RESPONSE_LEN, GFP_KERNEL); + if (buffer == NULL) + return USB_STOR_TRANSPORT_ERROR; + + memcpy(buffer, rezero_msg, sizeof(rezero_msg)); + result = usb_stor_bulk_transfer_buf(us, + us->send_bulk_pipe, + buffer, sizeof(rezero_msg), NULL); + if (result != USB_STOR_XFER_GOOD) { + result = USB_STOR_XFER_ERROR; + goto out; + } + + /* Some of the devices need to be asked for a response, but we don't + * care what that response is. + */ + usb_stor_bulk_transfer_buf(us, + us->recv_bulk_pipe, + buffer, RESPONSE_LEN, NULL); + + /* Read the CSW */ + usb_stor_bulk_transfer_buf(us, + us->recv_bulk_pipe, + buffer, 13, NULL); + + result = USB_STOR_XFER_GOOD; + +out: + kfree(buffer); + return result; +} + +static int option_inquiry(struct us_data *us) +{ + const unsigned char inquiry_msg[] = { + 0x55, 0x53, 0x42, 0x43, 0x12, 0x34, 0x56, 0x78, + 0x24, 0x00, 0x00, 0x00, 0x80, 0x00, 0x06, 0x12, + 0x00, 0x00, 0x00, 0x24, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 + }; + char *buffer; + int result; + + usb_stor_dbg(us, "Option MS: %s\n", "device inquiry for vendor name"); + + buffer = kzalloc(0x24, GFP_KERNEL); + if (buffer == NULL) + return USB_STOR_TRANSPORT_ERROR; + + memcpy(buffer, inquiry_msg, sizeof(inquiry_msg)); + result = usb_stor_bulk_transfer_buf(us, + us->send_bulk_pipe, + buffer, sizeof(inquiry_msg), NULL); + if (result != USB_STOR_XFER_GOOD) { + result = USB_STOR_XFER_ERROR; + goto out; + } + + result = usb_stor_bulk_transfer_buf(us, + us->recv_bulk_pipe, + buffer, 0x24, NULL); + if (result != USB_STOR_XFER_GOOD) { + result = USB_STOR_XFER_ERROR; + goto out; + } + + result = memcmp(buffer+8, "Option", 6); + + if (result != 0) + result = memcmp(buffer+8, "ZCOPTION", 8); + + /* Read the CSW */ + usb_stor_bulk_transfer_buf(us, + us->recv_bulk_pipe, + buffer, 13, NULL); + +out: + kfree(buffer); + return result; +} + + +int option_ms_init(struct us_data *us) +{ + int result; + + usb_stor_dbg(us, "Option MS: %s\n", "option_ms_init called"); + + /* Additional test for vendor information via INQUIRY, + * because some vendor/product IDs are ambiguous + */ + result = option_inquiry(us); + if (result != 0) { + usb_stor_dbg(us, "Option MS: %s\n", + "vendor is not Option or not determinable, no action taken"); + return 0; + } else + usb_stor_dbg(us, "Option MS: %s\n", + "this is a genuine Option device, proceeding"); + + /* Force Modem mode */ + if (option_zero_cd == ZCD_FORCE_MODEM) { + usb_stor_dbg(us, "Option MS: %s\n", "Forcing Modem Mode"); + result = option_rezero(us); + if (result != USB_STOR_XFER_GOOD) + usb_stor_dbg(us, "Option MS: %s\n", + "Failed to switch to modem mode"); + return -EIO; + } else if (option_zero_cd == ZCD_ALLOW_MS) { + /* Allow Mass Storage mode (keep CD-Rom) */ + usb_stor_dbg(us, "Option MS: %s\n", + "Allowing Mass Storage Mode if device requests it"); + } + + return 0; +} + diff --git a/kernel/drivers/usb/storage/option_ms.h b/kernel/drivers/usb/storage/option_ms.h new file mode 100644 index 000000000..b6e448cab --- /dev/null +++ b/kernel/drivers/usb/storage/option_ms.h @@ -0,0 +1,4 @@ +#ifndef _OPTION_MS_H_ +#define _OPTION_MS_H_ +extern int option_ms_init(struct us_data *us); +#endif diff --git a/kernel/drivers/usb/storage/protocol.c b/kernel/drivers/usb/storage/protocol.c new file mode 100644 index 000000000..12e3c2fac --- /dev/null +++ b/kernel/drivers/usb/storage/protocol.c @@ -0,0 +1,193 @@ +/* Driver for USB Mass Storage compliant devices + * + * Current development and maintenance by: + * (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net) + * + * Developed with the assistance of: + * (c) 2000 David L. Brown, Jr. (usb-storage@davidb.org) + * (c) 2002 Alan Stern (stern@rowland.org) + * + * Initial work by: + * (c) 1999 Michael Gee (michael@linuxspecific.com) + * + * This driver is based on the 'USB Mass Storage Class' document. This + * describes in detail the protocol used to communicate with such + * devices. Clearly, the designers had SCSI and ATAPI commands in + * mind when they created this document. The commands are all very + * similar to commands in the SCSI-II and ATAPI specifications. + * + * It is important to note that in a number of cases this class + * exhibits class-specific exemptions from the USB specification. + * Notably the usage of NAK, STALL and ACK differs from the norm, in + * that they are used to communicate wait, failed and OK on commands. + * + * Also, for certain devices, the interrupt endpoint is used to convey + * status of a command. + * + * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more + * information about this driver. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/highmem.h> +#include <linux/export.h> +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> + +#include "usb.h" +#include "protocol.h" +#include "debug.h" +#include "scsiglue.h" +#include "transport.h" + +/*********************************************************************** + * Protocol routines + ***********************************************************************/ + +void usb_stor_pad12_command(struct scsi_cmnd *srb, struct us_data *us) +{ + /* + * Pad the SCSI command with zeros out to 12 bytes. If the + * command already is 12 bytes or longer, leave it alone. + * + * NOTE: This only works because a scsi_cmnd struct field contains + * a unsigned char cmnd[16], so we know we have storage available + */ + for (; srb->cmd_len < 12; srb->cmd_len++) + srb->cmnd[srb->cmd_len] = 0; + + /* send the command to the transport layer */ + usb_stor_invoke_transport(srb, us); +} + +void usb_stor_ufi_command(struct scsi_cmnd *srb, struct us_data *us) +{ + /* fix some commands -- this is a form of mode translation + * UFI devices only accept 12 byte long commands + * + * NOTE: This only works because a scsi_cmnd struct field contains + * a unsigned char cmnd[16], so we know we have storage available + */ + + /* Pad the ATAPI command with zeros */ + for (; srb->cmd_len < 12; srb->cmd_len++) + srb->cmnd[srb->cmd_len] = 0; + + /* set command length to 12 bytes (this affects the transport layer) */ + srb->cmd_len = 12; + + /* XXX We should be constantly re-evaluating the need for these */ + + /* determine the correct data length for these commands */ + switch (srb->cmnd[0]) { + + /* for INQUIRY, UFI devices only ever return 36 bytes */ + case INQUIRY: + srb->cmnd[4] = 36; + break; + + /* again, for MODE_SENSE_10, we get the minimum (8) */ + case MODE_SENSE_10: + srb->cmnd[7] = 0; + srb->cmnd[8] = 8; + break; + + /* for REQUEST_SENSE, UFI devices only ever return 18 bytes */ + case REQUEST_SENSE: + srb->cmnd[4] = 18; + break; + } /* end switch on cmnd[0] */ + + /* send the command to the transport layer */ + usb_stor_invoke_transport(srb, us); +} + +void usb_stor_transparent_scsi_command(struct scsi_cmnd *srb, + struct us_data *us) +{ + /* send the command to the transport layer */ + usb_stor_invoke_transport(srb, us); +} +EXPORT_SYMBOL_GPL(usb_stor_transparent_scsi_command); + +/*********************************************************************** + * Scatter-gather transfer buffer access routines + ***********************************************************************/ + +/* Copy a buffer of length buflen to/from the srb's transfer buffer. + * Update the **sgptr and *offset variables so that the next copy will + * pick up from where this one left off. + */ +unsigned int usb_stor_access_xfer_buf(unsigned char *buffer, + unsigned int buflen, struct scsi_cmnd *srb, struct scatterlist **sgptr, + unsigned int *offset, enum xfer_buf_dir dir) +{ + unsigned int cnt = 0; + struct scatterlist *sg = *sgptr; + struct sg_mapping_iter miter; + unsigned int nents = scsi_sg_count(srb); + + if (sg) + nents = sg_nents(sg); + else + sg = scsi_sglist(srb); + + sg_miter_start(&miter, sg, nents, dir == FROM_XFER_BUF ? + SG_MITER_FROM_SG: SG_MITER_TO_SG); + + if (!sg_miter_skip(&miter, *offset)) + return cnt; + + while (sg_miter_next(&miter) && cnt < buflen) { + unsigned int len = min_t(unsigned int, miter.length, + buflen - cnt); + + if (dir == FROM_XFER_BUF) + memcpy(buffer + cnt, miter.addr, len); + else + memcpy(miter.addr, buffer + cnt, len); + + if (*offset + len < miter.piter.sg->length) { + *offset += len; + *sgptr = miter.piter.sg; + } else { + *offset = 0; + *sgptr = sg_next(miter.piter.sg); + } + cnt += len; + } + sg_miter_stop(&miter); + + return cnt; +} +EXPORT_SYMBOL_GPL(usb_stor_access_xfer_buf); + +/* Store the contents of buffer into srb's transfer buffer and set the + * SCSI residue. + */ +void usb_stor_set_xfer_buf(unsigned char *buffer, + unsigned int buflen, struct scsi_cmnd *srb) +{ + unsigned int offset = 0; + struct scatterlist *sg = NULL; + + buflen = min(buflen, scsi_bufflen(srb)); + buflen = usb_stor_access_xfer_buf(buffer, buflen, srb, &sg, &offset, + TO_XFER_BUF); + if (buflen < scsi_bufflen(srb)) + scsi_set_resid(srb, scsi_bufflen(srb) - buflen); +} +EXPORT_SYMBOL_GPL(usb_stor_set_xfer_buf); diff --git a/kernel/drivers/usb/storage/protocol.h b/kernel/drivers/usb/storage/protocol.h new file mode 100644 index 000000000..ffc3e2af0 --- /dev/null +++ b/kernel/drivers/usb/storage/protocol.h @@ -0,0 +1,57 @@ +/* Driver for USB Mass Storage compliant devices + * Protocol Functions Header File + * + * Current development and maintenance by: + * (c) 1999, 2000 Matthew Dharm (mdharm-usb@one-eyed-alien.net) + * + * This driver is based on the 'USB Mass Storage Class' document. This + * describes in detail the protocol used to communicate with such + * devices. Clearly, the designers had SCSI and ATAPI commands in + * mind when they created this document. The commands are all very + * similar to commands in the SCSI-II and ATAPI specifications. + * + * It is important to note that in a number of cases this class + * exhibits class-specific exemptions from the USB specification. + * Notably the usage of NAK, STALL and ACK differs from the norm, in + * that they are used to communicate wait, failed and OK on commands. + * + * Also, for certain devices, the interrupt endpoint is used to convey + * status of a command. + * + * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more + * information about this driver. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _PROTOCOL_H_ +#define _PROTOCOL_H_ + +/* Protocol handling routines */ +extern void usb_stor_pad12_command(struct scsi_cmnd*, struct us_data*); +extern void usb_stor_ufi_command(struct scsi_cmnd*, struct us_data*); +extern void usb_stor_transparent_scsi_command(struct scsi_cmnd*, + struct us_data*); + +/* struct scsi_cmnd transfer buffer access utilities */ +enum xfer_buf_dir {TO_XFER_BUF, FROM_XFER_BUF}; + +extern unsigned int usb_stor_access_xfer_buf(unsigned char *buffer, + unsigned int buflen, struct scsi_cmnd *srb, struct scatterlist **, + unsigned int *offset, enum xfer_buf_dir dir); + +extern void usb_stor_set_xfer_buf(unsigned char *buffer, + unsigned int buflen, struct scsi_cmnd *srb); +#endif diff --git a/kernel/drivers/usb/storage/realtek_cr.c b/kernel/drivers/usb/storage/realtek_cr.c new file mode 100644 index 000000000..27e4a580d --- /dev/null +++ b/kernel/drivers/usb/storage/realtek_cr.c @@ -0,0 +1,1073 @@ +/* Driver for Realtek RTS51xx USB card reader + * + * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + * + * Author: + * wwang (wei_wang@realsil.com.cn) + * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China + */ + +#include <linux/module.h> +#include <linux/blkdev.h> +#include <linux/kthread.h> +#include <linux/sched.h> +#include <linux/kernel.h> + +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_device.h> +#include <linux/cdrom.h> + +#include <linux/usb.h> +#include <linux/slab.h> +#include <linux/usb_usual.h> + +#include "usb.h" +#include "transport.h" +#include "protocol.h" +#include "debug.h" + +MODULE_DESCRIPTION("Driver for Realtek USB Card Reader"); +MODULE_AUTHOR("wwang <wei_wang@realsil.com.cn>"); +MODULE_LICENSE("GPL"); +MODULE_VERSION("1.03"); + +static int auto_delink_en = 1; +module_param(auto_delink_en, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(auto_delink_en, "enable auto delink"); + +#ifdef CONFIG_REALTEK_AUTOPM +static int ss_en = 1; +module_param(ss_en, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(ss_en, "enable selective suspend"); + +static int ss_delay = 50; +module_param(ss_delay, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(ss_delay, + "seconds to delay before entering selective suspend"); + +enum RTS51X_STAT { + RTS51X_STAT_INIT, + RTS51X_STAT_IDLE, + RTS51X_STAT_RUN, + RTS51X_STAT_SS +}; + +#define POLLING_INTERVAL 50 + +#define rts51x_set_stat(chip, stat) \ + ((chip)->state = (enum RTS51X_STAT)(stat)) +#define rts51x_get_stat(chip) ((chip)->state) + +#define SET_LUN_READY(chip, lun) ((chip)->lun_ready |= ((u8)1 << (lun))) +#define CLR_LUN_READY(chip, lun) ((chip)->lun_ready &= ~((u8)1 << (lun))) +#define TST_LUN_READY(chip, lun) ((chip)->lun_ready & ((u8)1 << (lun))) + +#endif + +struct rts51x_status { + u16 vid; + u16 pid; + u8 cur_lun; + u8 card_type; + u8 total_lun; + u16 fw_ver; + u8 phy_exist; + u8 multi_flag; + u8 multi_card; + u8 log_exist; + union { + u8 detailed_type1; + u8 detailed_type2; + } detailed_type; + u8 function[2]; +}; + +struct rts51x_chip { + u16 vendor_id; + u16 product_id; + char max_lun; + + struct rts51x_status *status; + int status_len; + + u32 flag; + struct us_data *us; + +#ifdef CONFIG_REALTEK_AUTOPM + struct timer_list rts51x_suspend_timer; + unsigned long timer_expires; + int pwr_state; + u8 lun_ready; + enum RTS51X_STAT state; + int support_auto_delink; +#endif + /* used to back up the protocol chosen in probe1 phase */ + proto_cmnd proto_handler_backup; +}; + +/* flag definition */ +#define FLIDX_AUTO_DELINK 0x01 + +#define SCSI_LUN(srb) ((srb)->device->lun) + +/* Bit Operation */ +#define SET_BIT(data, idx) ((data) |= 1 << (idx)) +#define CLR_BIT(data, idx) ((data) &= ~(1 << (idx))) +#define CHK_BIT(data, idx) ((data) & (1 << (idx))) + +#define SET_AUTO_DELINK(chip) ((chip)->flag |= FLIDX_AUTO_DELINK) +#define CLR_AUTO_DELINK(chip) ((chip)->flag &= ~FLIDX_AUTO_DELINK) +#define CHK_AUTO_DELINK(chip) ((chip)->flag & FLIDX_AUTO_DELINK) + +#define RTS51X_GET_VID(chip) ((chip)->vendor_id) +#define RTS51X_GET_PID(chip) ((chip)->product_id) + +#define VENDOR_ID(chip) ((chip)->status[0].vid) +#define PRODUCT_ID(chip) ((chip)->status[0].pid) +#define FW_VERSION(chip) ((chip)->status[0].fw_ver) +#define STATUS_LEN(chip) ((chip)->status_len) + +#define STATUS_SUCCESS 0 +#define STATUS_FAIL 1 + +/* Check card reader function */ +#define SUPPORT_DETAILED_TYPE1(chip) \ + CHK_BIT((chip)->status[0].function[0], 1) +#define SUPPORT_OT(chip) \ + CHK_BIT((chip)->status[0].function[0], 2) +#define SUPPORT_OC(chip) \ + CHK_BIT((chip)->status[0].function[0], 3) +#define SUPPORT_AUTO_DELINK(chip) \ + CHK_BIT((chip)->status[0].function[0], 4) +#define SUPPORT_SDIO(chip) \ + CHK_BIT((chip)->status[0].function[1], 0) +#define SUPPORT_DETAILED_TYPE2(chip) \ + CHK_BIT((chip)->status[0].function[1], 1) + +#define CHECK_PID(chip, pid) (RTS51X_GET_PID(chip) == (pid)) +#define CHECK_FW_VER(chip, fw_ver) (FW_VERSION(chip) == (fw_ver)) +#define CHECK_ID(chip, pid, fw_ver) \ + (CHECK_PID((chip), (pid)) && CHECK_FW_VER((chip), (fw_ver))) + +static int init_realtek_cr(struct us_data *us); + +/* + * The table of devices + */ +#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ + vendorName, productName, useProtocol, useTransport, \ + initFunction, flags) \ +{\ + USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ + .driver_info = (flags) \ +} + +static const struct usb_device_id realtek_cr_ids[] = { +# include "unusual_realtek.h" + {} /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, realtek_cr_ids); + +#undef UNUSUAL_DEV + +/* + * The flags table + */ +#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \ + vendor_name, product_name, use_protocol, use_transport, \ + init_function, Flags) \ +{ \ + .vendorName = vendor_name, \ + .productName = product_name, \ + .useProtocol = use_protocol, \ + .useTransport = use_transport, \ + .initFunction = init_function, \ +} + +static struct us_unusual_dev realtek_cr_unusual_dev_list[] = { +# include "unusual_realtek.h" + {} /* Terminating entry */ +}; + +#undef UNUSUAL_DEV + +static int rts51x_bulk_transport(struct us_data *us, u8 lun, + u8 *cmd, int cmd_len, u8 *buf, int buf_len, + enum dma_data_direction dir, int *act_len) +{ + struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *)us->iobuf; + struct bulk_cs_wrap *bcs = (struct bulk_cs_wrap *)us->iobuf; + int result; + unsigned int residue; + unsigned int cswlen; + unsigned int cbwlen = US_BULK_CB_WRAP_LEN; + + /* set up the command wrapper */ + bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN); + bcb->DataTransferLength = cpu_to_le32(buf_len); + bcb->Flags = (dir == DMA_FROM_DEVICE) ? US_BULK_FLAG_IN : 0; + bcb->Tag = ++us->tag; + bcb->Lun = lun; + bcb->Length = cmd_len; + + /* copy the command payload */ + memset(bcb->CDB, 0, sizeof(bcb->CDB)); + memcpy(bcb->CDB, cmd, bcb->Length); + + /* send it to out endpoint */ + result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, + bcb, cbwlen, NULL); + if (result != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + /* DATA STAGE */ + /* send/receive data payload, if there is any */ + + if (buf && buf_len) { + unsigned int pipe = (dir == DMA_FROM_DEVICE) ? + us->recv_bulk_pipe : us->send_bulk_pipe; + result = usb_stor_bulk_transfer_buf(us, pipe, + buf, buf_len, NULL); + if (result == USB_STOR_XFER_ERROR) + return USB_STOR_TRANSPORT_ERROR; + } + + /* get CSW for device status */ + result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, + bcs, US_BULK_CS_WRAP_LEN, &cswlen); + if (result != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + /* check bulk status */ + if (bcs->Signature != cpu_to_le32(US_BULK_CS_SIGN)) { + usb_stor_dbg(us, "Signature mismatch: got %08X, expecting %08X\n", + le32_to_cpu(bcs->Signature), US_BULK_CS_SIGN); + return USB_STOR_TRANSPORT_ERROR; + } + + residue = bcs->Residue; + if (bcs->Tag != us->tag) + return USB_STOR_TRANSPORT_ERROR; + + /* try to compute the actual residue, based on how much data + * was really transferred and what the device tells us */ + if (residue) + residue = residue < buf_len ? residue : buf_len; + + if (act_len) + *act_len = buf_len - residue; + + /* based on the status code, we report good or bad */ + switch (bcs->Status) { + case US_BULK_STAT_OK: + /* command good -- note that data could be short */ + return USB_STOR_TRANSPORT_GOOD; + + case US_BULK_STAT_FAIL: + /* command failed */ + return USB_STOR_TRANSPORT_FAILED; + + case US_BULK_STAT_PHASE: + /* phase error -- note that a transport reset will be + * invoked by the invoke_transport() function + */ + return USB_STOR_TRANSPORT_ERROR; + } + + /* we should never get here, but if we do, we're in trouble */ + return USB_STOR_TRANSPORT_ERROR; +} + +static int rts51x_bulk_transport_special(struct us_data *us, u8 lun, + u8 *cmd, int cmd_len, u8 *buf, int buf_len, + enum dma_data_direction dir, int *act_len) +{ + struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf; + struct bulk_cs_wrap *bcs = (struct bulk_cs_wrap *) us->iobuf; + int result; + unsigned int cswlen; + unsigned int cbwlen = US_BULK_CB_WRAP_LEN; + + /* set up the command wrapper */ + bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN); + bcb->DataTransferLength = cpu_to_le32(buf_len); + bcb->Flags = (dir == DMA_FROM_DEVICE) ? US_BULK_FLAG_IN : 0; + bcb->Tag = ++us->tag; + bcb->Lun = lun; + bcb->Length = cmd_len; + + /* copy the command payload */ + memset(bcb->CDB, 0, sizeof(bcb->CDB)); + memcpy(bcb->CDB, cmd, bcb->Length); + + /* send it to out endpoint */ + result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, + bcb, cbwlen, NULL); + if (result != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + /* DATA STAGE */ + /* send/receive data payload, if there is any */ + + if (buf && buf_len) { + unsigned int pipe = (dir == DMA_FROM_DEVICE) ? + us->recv_bulk_pipe : us->send_bulk_pipe; + result = usb_stor_bulk_transfer_buf(us, pipe, + buf, buf_len, NULL); + if (result == USB_STOR_XFER_ERROR) + return USB_STOR_TRANSPORT_ERROR; + } + + /* get CSW for device status */ + result = usb_bulk_msg(us->pusb_dev, us->recv_bulk_pipe, bcs, + US_BULK_CS_WRAP_LEN, &cswlen, 250); + return result; +} + +/* Determine what the maximum LUN supported is */ +static int rts51x_get_max_lun(struct us_data *us) +{ + int result; + + /* issue the command */ + us->iobuf[0] = 0; + result = usb_stor_control_msg(us, us->recv_ctrl_pipe, + US_BULK_GET_MAX_LUN, + USB_DIR_IN | USB_TYPE_CLASS | + USB_RECIP_INTERFACE, + 0, us->ifnum, us->iobuf, 1, 10 * HZ); + + usb_stor_dbg(us, "GetMaxLUN command result is %d, data is %d\n", + result, us->iobuf[0]); + + /* if we have a successful request, return the result */ + if (result > 0) + return us->iobuf[0]; + + return 0; +} + +static int rts51x_read_mem(struct us_data *us, u16 addr, u8 *data, u16 len) +{ + int retval; + u8 cmnd[12] = { 0 }; + u8 *buf; + + buf = kmalloc(len, GFP_NOIO); + if (buf == NULL) + return USB_STOR_TRANSPORT_ERROR; + + usb_stor_dbg(us, "addr = 0x%x, len = %d\n", addr, len); + + cmnd[0] = 0xF0; + cmnd[1] = 0x0D; + cmnd[2] = (u8) (addr >> 8); + cmnd[3] = (u8) addr; + cmnd[4] = (u8) (len >> 8); + cmnd[5] = (u8) len; + + retval = rts51x_bulk_transport(us, 0, cmnd, 12, + buf, len, DMA_FROM_DEVICE, NULL); + if (retval != USB_STOR_TRANSPORT_GOOD) { + kfree(buf); + return -EIO; + } + + memcpy(data, buf, len); + kfree(buf); + return 0; +} + +static int rts51x_write_mem(struct us_data *us, u16 addr, u8 *data, u16 len) +{ + int retval; + u8 cmnd[12] = { 0 }; + u8 *buf; + + buf = kmemdup(data, len, GFP_NOIO); + if (buf == NULL) + return USB_STOR_TRANSPORT_ERROR; + + usb_stor_dbg(us, "addr = 0x%x, len = %d\n", addr, len); + + cmnd[0] = 0xF0; + cmnd[1] = 0x0E; + cmnd[2] = (u8) (addr >> 8); + cmnd[3] = (u8) addr; + cmnd[4] = (u8) (len >> 8); + cmnd[5] = (u8) len; + + retval = rts51x_bulk_transport(us, 0, cmnd, 12, + buf, len, DMA_TO_DEVICE, NULL); + kfree(buf); + if (retval != USB_STOR_TRANSPORT_GOOD) + return -EIO; + + return 0; +} + +static int rts51x_read_status(struct us_data *us, + u8 lun, u8 *status, int len, int *actlen) +{ + int retval; + u8 cmnd[12] = { 0 }; + u8 *buf; + + buf = kmalloc(len, GFP_NOIO); + if (buf == NULL) + return USB_STOR_TRANSPORT_ERROR; + + usb_stor_dbg(us, "lun = %d\n", lun); + + cmnd[0] = 0xF0; + cmnd[1] = 0x09; + + retval = rts51x_bulk_transport(us, lun, cmnd, 12, + buf, len, DMA_FROM_DEVICE, actlen); + if (retval != USB_STOR_TRANSPORT_GOOD) { + kfree(buf); + return -EIO; + } + + memcpy(status, buf, len); + kfree(buf); + return 0; +} + +static int rts51x_check_status(struct us_data *us, u8 lun) +{ + struct rts51x_chip *chip = (struct rts51x_chip *)(us->extra); + int retval; + u8 buf[16]; + + retval = rts51x_read_status(us, lun, buf, 16, &(chip->status_len)); + if (retval != STATUS_SUCCESS) + return -EIO; + + usb_stor_dbg(us, "chip->status_len = %d\n", chip->status_len); + + chip->status[lun].vid = ((u16) buf[0] << 8) | buf[1]; + chip->status[lun].pid = ((u16) buf[2] << 8) | buf[3]; + chip->status[lun].cur_lun = buf[4]; + chip->status[lun].card_type = buf[5]; + chip->status[lun].total_lun = buf[6]; + chip->status[lun].fw_ver = ((u16) buf[7] << 8) | buf[8]; + chip->status[lun].phy_exist = buf[9]; + chip->status[lun].multi_flag = buf[10]; + chip->status[lun].multi_card = buf[11]; + chip->status[lun].log_exist = buf[12]; + if (chip->status_len == 16) { + chip->status[lun].detailed_type.detailed_type1 = buf[13]; + chip->status[lun].function[0] = buf[14]; + chip->status[lun].function[1] = buf[15]; + } + + return 0; +} + +static int enable_oscillator(struct us_data *us) +{ + int retval; + u8 value; + + retval = rts51x_read_mem(us, 0xFE77, &value, 1); + if (retval < 0) + return -EIO; + + value |= 0x04; + retval = rts51x_write_mem(us, 0xFE77, &value, 1); + if (retval < 0) + return -EIO; + + retval = rts51x_read_mem(us, 0xFE77, &value, 1); + if (retval < 0) + return -EIO; + + if (!(value & 0x04)) + return -EIO; + + return 0; +} + +static int __do_config_autodelink(struct us_data *us, u8 *data, u16 len) +{ + int retval; + u8 cmnd[12] = {0}; + u8 *buf; + + usb_stor_dbg(us, "addr = 0xfe47, len = %d\n", len); + + buf = kmemdup(data, len, GFP_NOIO); + if (!buf) + return USB_STOR_TRANSPORT_ERROR; + + cmnd[0] = 0xF0; + cmnd[1] = 0x0E; + cmnd[2] = 0xfe; + cmnd[3] = 0x47; + cmnd[4] = (u8)(len >> 8); + cmnd[5] = (u8)len; + + retval = rts51x_bulk_transport_special(us, 0, cmnd, 12, buf, len, DMA_TO_DEVICE, NULL); + kfree(buf); + if (retval != USB_STOR_TRANSPORT_GOOD) { + return -EIO; + } + + return 0; +} + +static int do_config_autodelink(struct us_data *us, int enable, int force) +{ + int retval; + u8 value; + + retval = rts51x_read_mem(us, 0xFE47, &value, 1); + if (retval < 0) + return -EIO; + + if (enable) { + if (force) + value |= 0x03; + else + value |= 0x01; + } else { + value &= ~0x03; + } + + usb_stor_dbg(us, "set 0xfe47 to 0x%x\n", value); + + /* retval = rts51x_write_mem(us, 0xFE47, &value, 1); */ + retval = __do_config_autodelink(us, &value, 1); + if (retval < 0) + return -EIO; + + return 0; +} + +static int config_autodelink_after_power_on(struct us_data *us) +{ + struct rts51x_chip *chip = (struct rts51x_chip *)(us->extra); + int retval; + u8 value; + + if (!CHK_AUTO_DELINK(chip)) + return 0; + + retval = rts51x_read_mem(us, 0xFE47, &value, 1); + if (retval < 0) + return -EIO; + + if (auto_delink_en) { + CLR_BIT(value, 0); + CLR_BIT(value, 1); + SET_BIT(value, 2); + + if (CHECK_ID(chip, 0x0138, 0x3882)) + CLR_BIT(value, 2); + + SET_BIT(value, 7); + + /* retval = rts51x_write_mem(us, 0xFE47, &value, 1); */ + retval = __do_config_autodelink(us, &value, 1); + if (retval < 0) + return -EIO; + + retval = enable_oscillator(us); + if (retval == 0) + (void)do_config_autodelink(us, 1, 0); + } else { + /* Autodelink controlled by firmware */ + + SET_BIT(value, 2); + + if (CHECK_ID(chip, 0x0138, 0x3882)) + CLR_BIT(value, 2); + + if (CHECK_ID(chip, 0x0159, 0x5889) || + CHECK_ID(chip, 0x0138, 0x3880)) { + CLR_BIT(value, 0); + CLR_BIT(value, 7); + } + + /* retval = rts51x_write_mem(us, 0xFE47, &value, 1); */ + retval = __do_config_autodelink(us, &value, 1); + if (retval < 0) + return -EIO; + + if (CHECK_ID(chip, 0x0159, 0x5888)) { + value = 0xFF; + retval = rts51x_write_mem(us, 0xFE79, &value, 1); + if (retval < 0) + return -EIO; + + value = 0x01; + retval = rts51x_write_mem(us, 0x48, &value, 1); + if (retval < 0) + return -EIO; + } + } + + return 0; +} + +#ifdef CONFIG_PM +static int config_autodelink_before_power_down(struct us_data *us) +{ + struct rts51x_chip *chip = (struct rts51x_chip *)(us->extra); + int retval; + u8 value; + + if (!CHK_AUTO_DELINK(chip)) + return 0; + + if (auto_delink_en) { + retval = rts51x_read_mem(us, 0xFE77, &value, 1); + if (retval < 0) + return -EIO; + + SET_BIT(value, 2); + retval = rts51x_write_mem(us, 0xFE77, &value, 1); + if (retval < 0) + return -EIO; + + if (CHECK_ID(chip, 0x0159, 0x5888)) { + value = 0x01; + retval = rts51x_write_mem(us, 0x48, &value, 1); + if (retval < 0) + return -EIO; + } + + retval = rts51x_read_mem(us, 0xFE47, &value, 1); + if (retval < 0) + return -EIO; + + SET_BIT(value, 0); + if (CHECK_ID(chip, 0x0138, 0x3882)) + SET_BIT(value, 2); + retval = rts51x_write_mem(us, 0xFE77, &value, 1); + if (retval < 0) + return -EIO; + } else { + if (CHECK_ID(chip, 0x0159, 0x5889) || + CHECK_ID(chip, 0x0138, 0x3880) || + CHECK_ID(chip, 0x0138, 0x3882)) { + retval = rts51x_read_mem(us, 0xFE47, &value, 1); + if (retval < 0) + return -EIO; + + if (CHECK_ID(chip, 0x0159, 0x5889) || + CHECK_ID(chip, 0x0138, 0x3880)) { + SET_BIT(value, 0); + SET_BIT(value, 7); + } + + if (CHECK_ID(chip, 0x0138, 0x3882)) + SET_BIT(value, 2); + + /* retval = rts51x_write_mem(us, 0xFE47, &value, 1); */ + retval = __do_config_autodelink(us, &value, 1); + if (retval < 0) + return -EIO; + } + + if (CHECK_ID(chip, 0x0159, 0x5888)) { + value = 0x01; + retval = rts51x_write_mem(us, 0x48, &value, 1); + if (retval < 0) + return -EIO; + } + } + + return 0; +} + +static void fw5895_init(struct us_data *us) +{ + struct rts51x_chip *chip = (struct rts51x_chip *)(us->extra); + int retval; + u8 val; + + if ((PRODUCT_ID(chip) != 0x0158) || (FW_VERSION(chip) != 0x5895)) { + usb_stor_dbg(us, "Not the specified device, return immediately!\n"); + } else { + retval = rts51x_read_mem(us, 0xFD6F, &val, 1); + if (retval == STATUS_SUCCESS && (val & 0x1F) == 0) { + val = 0x1F; + retval = rts51x_write_mem(us, 0xFD70, &val, 1); + if (retval != STATUS_SUCCESS) + usb_stor_dbg(us, "Write memory fail\n"); + } else { + usb_stor_dbg(us, "Read memory fail, OR (val & 0x1F) != 0\n"); + } + } +} +#endif + +#ifdef CONFIG_REALTEK_AUTOPM +static void fw5895_set_mmc_wp(struct us_data *us) +{ + struct rts51x_chip *chip = (struct rts51x_chip *)(us->extra); + int retval; + u8 buf[13]; + + if ((PRODUCT_ID(chip) != 0x0158) || (FW_VERSION(chip) != 0x5895)) { + usb_stor_dbg(us, "Not the specified device, return immediately!\n"); + } else { + retval = rts51x_read_mem(us, 0xFD6F, buf, 1); + if (retval == STATUS_SUCCESS && (buf[0] & 0x24) == 0x24) { + /* SD Exist and SD WP */ + retval = rts51x_read_mem(us, 0xD04E, buf, 1); + if (retval == STATUS_SUCCESS) { + buf[0] |= 0x04; + retval = rts51x_write_mem(us, 0xFD70, buf, 1); + if (retval != STATUS_SUCCESS) + usb_stor_dbg(us, "Write memory fail\n"); + } else { + usb_stor_dbg(us, "Read memory fail\n"); + } + } else { + usb_stor_dbg(us, "Read memory fail, OR (buf[0]&0x24)!=0x24\n"); + } + } +} + +static void rts51x_modi_suspend_timer(struct rts51x_chip *chip) +{ + struct us_data *us = chip->us; + + usb_stor_dbg(us, "state:%d\n", rts51x_get_stat(chip)); + + chip->timer_expires = jiffies + msecs_to_jiffies(1000*ss_delay); + mod_timer(&chip->rts51x_suspend_timer, chip->timer_expires); +} + +static void rts51x_suspend_timer_fn(unsigned long data) +{ + struct rts51x_chip *chip = (struct rts51x_chip *)data; + struct us_data *us = chip->us; + + switch (rts51x_get_stat(chip)) { + case RTS51X_STAT_INIT: + case RTS51X_STAT_RUN: + rts51x_modi_suspend_timer(chip); + break; + case RTS51X_STAT_IDLE: + case RTS51X_STAT_SS: + usb_stor_dbg(us, "RTS51X_STAT_SS, intf->pm_usage_cnt:%d, power.usage:%d\n", + atomic_read(&us->pusb_intf->pm_usage_cnt), + atomic_read(&us->pusb_intf->dev.power.usage_count)); + + if (atomic_read(&us->pusb_intf->pm_usage_cnt) > 0) { + usb_stor_dbg(us, "Ready to enter SS state\n"); + rts51x_set_stat(chip, RTS51X_STAT_SS); + /* ignore mass storage interface's children */ + pm_suspend_ignore_children(&us->pusb_intf->dev, true); + usb_autopm_put_interface_async(us->pusb_intf); + usb_stor_dbg(us, "RTS51X_STAT_SS 01, intf->pm_usage_cnt:%d, power.usage:%d\n", + atomic_read(&us->pusb_intf->pm_usage_cnt), + atomic_read(&us->pusb_intf->dev.power.usage_count)); + } + break; + default: + usb_stor_dbg(us, "Unknown state !!!\n"); + break; + } +} + +static inline int working_scsi(struct scsi_cmnd *srb) +{ + if ((srb->cmnd[0] == TEST_UNIT_READY) || + (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL)) { + return 0; + } + + return 1; +} + +static void rts51x_invoke_transport(struct scsi_cmnd *srb, struct us_data *us) +{ + struct rts51x_chip *chip = (struct rts51x_chip *)(us->extra); + static int card_first_show = 1; + static u8 media_not_present[] = { 0x70, 0, 0x02, 0, 0, 0, 0, + 10, 0, 0, 0, 0, 0x3A, 0, 0, 0, 0, 0 + }; + static u8 invalid_cmd_field[] = { 0x70, 0, 0x05, 0, 0, 0, 0, + 10, 0, 0, 0, 0, 0x24, 0, 0, 0, 0, 0 + }; + int ret; + + if (working_scsi(srb)) { + usb_stor_dbg(us, "working scsi, intf->pm_usage_cnt:%d, power.usage:%d\n", + atomic_read(&us->pusb_intf->pm_usage_cnt), + atomic_read(&us->pusb_intf->dev.power.usage_count)); + + if (atomic_read(&us->pusb_intf->pm_usage_cnt) <= 0) { + ret = usb_autopm_get_interface(us->pusb_intf); + usb_stor_dbg(us, "working scsi, ret=%d\n", ret); + } + if (rts51x_get_stat(chip) != RTS51X_STAT_RUN) + rts51x_set_stat(chip, RTS51X_STAT_RUN); + chip->proto_handler_backup(srb, us); + } else { + if (rts51x_get_stat(chip) == RTS51X_STAT_SS) { + usb_stor_dbg(us, "NOT working scsi\n"); + if ((srb->cmnd[0] == TEST_UNIT_READY) && + (chip->pwr_state == US_SUSPEND)) { + if (TST_LUN_READY(chip, srb->device->lun)) { + srb->result = SAM_STAT_GOOD; + } else { + srb->result = SAM_STAT_CHECK_CONDITION; + memcpy(srb->sense_buffer, + media_not_present, + US_SENSE_SIZE); + } + usb_stor_dbg(us, "TEST_UNIT_READY\n"); + goto out; + } + if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) { + int prevent = srb->cmnd[4] & 0x1; + if (prevent) { + srb->result = SAM_STAT_CHECK_CONDITION; + memcpy(srb->sense_buffer, + invalid_cmd_field, + US_SENSE_SIZE); + } else { + srb->result = SAM_STAT_GOOD; + } + usb_stor_dbg(us, "ALLOW_MEDIUM_REMOVAL\n"); + goto out; + } + } else { + usb_stor_dbg(us, "NOT working scsi, not SS\n"); + chip->proto_handler_backup(srb, us); + /* Check whether card is plugged in */ + if (srb->cmnd[0] == TEST_UNIT_READY) { + if (srb->result == SAM_STAT_GOOD) { + SET_LUN_READY(chip, srb->device->lun); + if (card_first_show) { + card_first_show = 0; + fw5895_set_mmc_wp(us); + } + } else { + CLR_LUN_READY(chip, srb->device->lun); + card_first_show = 1; + } + } + if (rts51x_get_stat(chip) != RTS51X_STAT_IDLE) + rts51x_set_stat(chip, RTS51X_STAT_IDLE); + } + } +out: + usb_stor_dbg(us, "state:%d\n", rts51x_get_stat(chip)); + if (rts51x_get_stat(chip) == RTS51X_STAT_RUN) + rts51x_modi_suspend_timer(chip); +} + +static int realtek_cr_autosuspend_setup(struct us_data *us) +{ + struct rts51x_chip *chip; + struct rts51x_status *status = NULL; + u8 buf[16]; + int retval; + + chip = (struct rts51x_chip *)us->extra; + chip->support_auto_delink = 0; + chip->pwr_state = US_RESUME; + chip->lun_ready = 0; + rts51x_set_stat(chip, RTS51X_STAT_INIT); + + retval = rts51x_read_status(us, 0, buf, 16, &(chip->status_len)); + if (retval != STATUS_SUCCESS) { + usb_stor_dbg(us, "Read status fail\n"); + return -EIO; + } + status = chip->status; + status->vid = ((u16) buf[0] << 8) | buf[1]; + status->pid = ((u16) buf[2] << 8) | buf[3]; + status->cur_lun = buf[4]; + status->card_type = buf[5]; + status->total_lun = buf[6]; + status->fw_ver = ((u16) buf[7] << 8) | buf[8]; + status->phy_exist = buf[9]; + status->multi_flag = buf[10]; + status->multi_card = buf[11]; + status->log_exist = buf[12]; + if (chip->status_len == 16) { + status->detailed_type.detailed_type1 = buf[13]; + status->function[0] = buf[14]; + status->function[1] = buf[15]; + } + + /* back up the proto_handler in us->extra */ + chip = (struct rts51x_chip *)(us->extra); + chip->proto_handler_backup = us->proto_handler; + /* Set the autosuspend_delay to 0 */ + pm_runtime_set_autosuspend_delay(&us->pusb_dev->dev, 0); + /* override us->proto_handler setted in get_protocol() */ + us->proto_handler = rts51x_invoke_transport; + + chip->timer_expires = 0; + setup_timer(&chip->rts51x_suspend_timer, rts51x_suspend_timer_fn, + (unsigned long)chip); + fw5895_init(us); + + /* enable autosuspend function of the usb device */ + usb_enable_autosuspend(us->pusb_dev); + + return 0; +} +#endif + +static void realtek_cr_destructor(void *extra) +{ + struct rts51x_chip *chip = extra; + + if (!chip) + return; + +#ifdef CONFIG_REALTEK_AUTOPM + if (ss_en) { + del_timer(&chip->rts51x_suspend_timer); + chip->timer_expires = 0; + } +#endif + kfree(chip->status); +} + +#ifdef CONFIG_PM +static int realtek_cr_suspend(struct usb_interface *iface, pm_message_t message) +{ + struct us_data *us = usb_get_intfdata(iface); + + /* wait until no command is running */ + mutex_lock(&us->dev_mutex); + + config_autodelink_before_power_down(us); + + mutex_unlock(&us->dev_mutex); + + return 0; +} + +static int realtek_cr_resume(struct usb_interface *iface) +{ + struct us_data *us = usb_get_intfdata(iface); + + fw5895_init(us); + config_autodelink_after_power_on(us); + + return 0; +} +#else +#define realtek_cr_suspend NULL +#define realtek_cr_resume NULL +#endif + +static int init_realtek_cr(struct us_data *us) +{ + struct rts51x_chip *chip; + int size, i, retval; + + chip = kzalloc(sizeof(struct rts51x_chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + us->extra = chip; + us->extra_destructor = realtek_cr_destructor; + us->max_lun = chip->max_lun = rts51x_get_max_lun(us); + chip->us = us; + + usb_stor_dbg(us, "chip->max_lun = %d\n", chip->max_lun); + + size = (chip->max_lun + 1) * sizeof(struct rts51x_status); + chip->status = kzalloc(size, GFP_KERNEL); + if (!chip->status) + goto INIT_FAIL; + + for (i = 0; i <= (int)(chip->max_lun); i++) { + retval = rts51x_check_status(us, (u8) i); + if (retval < 0) + goto INIT_FAIL; + } + + if (CHECK_FW_VER(chip, 0x5888) || CHECK_FW_VER(chip, 0x5889) || + CHECK_FW_VER(chip, 0x5901)) + SET_AUTO_DELINK(chip); + if (STATUS_LEN(chip) == 16) { + if (SUPPORT_AUTO_DELINK(chip)) + SET_AUTO_DELINK(chip); + } +#ifdef CONFIG_REALTEK_AUTOPM + if (ss_en) + realtek_cr_autosuspend_setup(us); +#endif + + usb_stor_dbg(us, "chip->flag = 0x%x\n", chip->flag); + + (void)config_autodelink_after_power_on(us); + + return 0; + +INIT_FAIL: + if (us->extra) { + kfree(chip->status); + kfree(us->extra); + us->extra = NULL; + } + + return -EIO; +} + +static int realtek_cr_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct us_data *us; + int result; + + dev_dbg(&intf->dev, "Probe Realtek Card Reader!\n"); + + result = usb_stor_probe1(&us, intf, id, + (id - realtek_cr_ids) + + realtek_cr_unusual_dev_list); + if (result) + return result; + + result = usb_stor_probe2(us); + + return result; +} + +static struct usb_driver realtek_cr_driver = { + .name = "ums-realtek", + .probe = realtek_cr_probe, + .disconnect = usb_stor_disconnect, + /* .suspend = usb_stor_suspend, */ + /* .resume = usb_stor_resume, */ + .reset_resume = usb_stor_reset_resume, + .suspend = realtek_cr_suspend, + .resume = realtek_cr_resume, + .pre_reset = usb_stor_pre_reset, + .post_reset = usb_stor_post_reset, + .id_table = realtek_cr_ids, + .soft_unbind = 1, + .supports_autosuspend = 1, + .no_dynamic_id = 1, +}; + +module_usb_driver(realtek_cr_driver); diff --git a/kernel/drivers/usb/storage/scsiglue.c b/kernel/drivers/usb/storage/scsiglue.c new file mode 100644 index 000000000..0e400f382 --- /dev/null +++ b/kernel/drivers/usb/storage/scsiglue.c @@ -0,0 +1,602 @@ +/* Driver for USB Mass Storage compliant devices + * SCSI layer glue code + * + * Current development and maintenance by: + * (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net) + * + * Developed with the assistance of: + * (c) 2000 David L. Brown, Jr. (usb-storage@davidb.org) + * (c) 2000 Stephen J. Gowdy (SGowdy@lbl.gov) + * + * Initial work by: + * (c) 1999 Michael Gee (michael@linuxspecific.com) + * + * This driver is based on the 'USB Mass Storage Class' document. This + * describes in detail the protocol used to communicate with such + * devices. Clearly, the designers had SCSI and ATAPI commands in + * mind when they created this document. The commands are all very + * similar to commands in the SCSI-II and ATAPI specifications. + * + * It is important to note that in a number of cases this class + * exhibits class-specific exemptions from the USB specification. + * Notably the usage of NAK, STALL and ACK differs from the norm, in + * that they are used to communicate wait, failed and OK on commands. + * + * Also, for certain devices, the interrupt endpoint is used to convey + * status of a command. + * + * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more + * information about this driver. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/mutex.h> + +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_devinfo.h> +#include <scsi/scsi_device.h> +#include <scsi/scsi_eh.h> + +#include "usb.h" +#include "scsiglue.h" +#include "debug.h" +#include "transport.h" +#include "protocol.h" + +/* Vendor IDs for companies that seem to include the READ CAPACITY bug + * in all their devices + */ +#define VENDOR_ID_NOKIA 0x0421 +#define VENDOR_ID_NIKON 0x04b0 +#define VENDOR_ID_PENTAX 0x0a17 +#define VENDOR_ID_MOTOROLA 0x22b8 + +/*********************************************************************** + * Host functions + ***********************************************************************/ + +static const char* host_info(struct Scsi_Host *host) +{ + struct us_data *us = host_to_us(host); + return us->scsi_name; +} + +static int slave_alloc (struct scsi_device *sdev) +{ + struct us_data *us = host_to_us(sdev->host); + + /* + * Set the INQUIRY transfer length to 36. We don't use any of + * the extra data and many devices choke if asked for more or + * less than 36 bytes. + */ + sdev->inquiry_len = 36; + + /* USB has unusual DMA-alignment requirements: Although the + * starting address of each scatter-gather element doesn't matter, + * the length of each element except the last must be divisible + * by the Bulk maxpacket value. There's currently no way to + * express this by block-layer constraints, so we'll cop out + * and simply require addresses to be aligned at 512-byte + * boundaries. This is okay since most block I/O involves + * hardware sectors that are multiples of 512 bytes in length, + * and since host controllers up through USB 2.0 have maxpacket + * values no larger than 512. + * + * But it doesn't suffice for Wireless USB, where Bulk maxpacket + * values can be as large as 2048. To make that work properly + * will require changes to the block layer. + */ + blk_queue_update_dma_alignment(sdev->request_queue, (512 - 1)); + + /* Tell the SCSI layer if we know there is more than one LUN */ + if (us->protocol == USB_PR_BULK && us->max_lun > 0) + sdev->sdev_bflags |= BLIST_FORCELUN; + + return 0; +} + +static int slave_configure(struct scsi_device *sdev) +{ + struct us_data *us = host_to_us(sdev->host); + + /* Many devices have trouble transferring more than 32KB at a time, + * while others have trouble with more than 64K. At this time we + * are limiting both to 32K (64 sectores). + */ + if (us->fflags & (US_FL_MAX_SECTORS_64 | US_FL_MAX_SECTORS_MIN)) { + unsigned int max_sectors = 64; + + if (us->fflags & US_FL_MAX_SECTORS_MIN) + max_sectors = PAGE_CACHE_SIZE >> 9; + if (queue_max_hw_sectors(sdev->request_queue) > max_sectors) + blk_queue_max_hw_sectors(sdev->request_queue, + max_sectors); + } else if (sdev->type == TYPE_TAPE) { + /* Tapes need much higher max_sector limits, so just + * raise it to the maximum possible (4 GB / 512) and + * let the queue segment size sort out the real limit. + */ + blk_queue_max_hw_sectors(sdev->request_queue, 0x7FFFFF); + } + + /* Some USB host controllers can't do DMA; they have to use PIO. + * They indicate this by setting their dma_mask to NULL. For + * such controllers we need to make sure the block layer sets + * up bounce buffers in addressable memory. + */ + if (!us->pusb_dev->bus->controller->dma_mask) + blk_queue_bounce_limit(sdev->request_queue, BLK_BOUNCE_HIGH); + + /* We can't put these settings in slave_alloc() because that gets + * called before the device type is known. Consequently these + * settings can't be overridden via the scsi devinfo mechanism. */ + if (sdev->type == TYPE_DISK) { + + /* Some vendors seem to put the READ CAPACITY bug into + * all their devices -- primarily makers of cell phones + * and digital cameras. Since these devices always use + * flash media and can be expected to have an even number + * of sectors, we will always enable the CAPACITY_HEURISTICS + * flag unless told otherwise. */ + switch (le16_to_cpu(us->pusb_dev->descriptor.idVendor)) { + case VENDOR_ID_NOKIA: + case VENDOR_ID_NIKON: + case VENDOR_ID_PENTAX: + case VENDOR_ID_MOTOROLA: + if (!(us->fflags & (US_FL_FIX_CAPACITY | + US_FL_CAPACITY_OK))) + us->fflags |= US_FL_CAPACITY_HEURISTICS; + break; + } + + /* Disk-type devices use MODE SENSE(6) if the protocol + * (SubClass) is Transparent SCSI, otherwise they use + * MODE SENSE(10). */ + if (us->subclass != USB_SC_SCSI && us->subclass != USB_SC_CYP_ATACB) + sdev->use_10_for_ms = 1; + + /* Many disks only accept MODE SENSE transfer lengths of + * 192 bytes (that's what Windows uses). */ + sdev->use_192_bytes_for_3f = 1; + + /* Some devices don't like MODE SENSE with page=0x3f, + * which is the command used for checking if a device + * is write-protected. Now that we tell the sd driver + * to do a 192-byte transfer with this command the + * majority of devices work fine, but a few still can't + * handle it. The sd driver will simply assume those + * devices are write-enabled. */ + if (us->fflags & US_FL_NO_WP_DETECT) + sdev->skip_ms_page_3f = 1; + + /* A number of devices have problems with MODE SENSE for + * page x08, so we will skip it. */ + sdev->skip_ms_page_8 = 1; + + /* Some devices don't handle VPD pages correctly */ + sdev->skip_vpd_pages = 1; + + /* Do not attempt to use REPORT SUPPORTED OPERATION CODES */ + sdev->no_report_opcodes = 1; + + /* Do not attempt to use WRITE SAME */ + sdev->no_write_same = 1; + + /* Some disks return the total number of blocks in response + * to READ CAPACITY rather than the highest block number. + * If this device makes that mistake, tell the sd driver. */ + if (us->fflags & US_FL_FIX_CAPACITY) + sdev->fix_capacity = 1; + + /* A few disks have two indistinguishable version, one of + * which reports the correct capacity and the other does not. + * The sd driver has to guess which is the case. */ + if (us->fflags & US_FL_CAPACITY_HEURISTICS) + sdev->guess_capacity = 1; + + /* Some devices cannot handle READ_CAPACITY_16 */ + if (us->fflags & US_FL_NO_READ_CAPACITY_16) + sdev->no_read_capacity_16 = 1; + + /* + * Many devices do not respond properly to READ_CAPACITY_16. + * Tell the SCSI layer to try READ_CAPACITY_10 first. + * However some USB 3.0 drive enclosures return capacity + * modulo 2TB. Those must use READ_CAPACITY_16 + */ + if (!(us->fflags & US_FL_NEEDS_CAP16)) + sdev->try_rc_10_first = 1; + + /* assume SPC3 or latter devices support sense size > 18 */ + if (sdev->scsi_level > SCSI_SPC_2) + us->fflags |= US_FL_SANE_SENSE; + + /* USB-IDE bridges tend to report SK = 0x04 (Non-recoverable + * Hardware Error) when any low-level error occurs, + * recoverable or not. Setting this flag tells the SCSI + * midlayer to retry such commands, which frequently will + * succeed and fix the error. The worst this can lead to + * is an occasional series of retries that will all fail. */ + sdev->retry_hwerror = 1; + + /* USB disks should allow restart. Some drives spin down + * automatically, requiring a START-STOP UNIT command. */ + sdev->allow_restart = 1; + + /* Some USB cardreaders have trouble reading an sdcard's last + * sector in a larger then 1 sector read, since the performance + * impact is negligible we set this flag for all USB disks */ + sdev->last_sector_bug = 1; + + /* Enable last-sector hacks for single-target devices using + * the Bulk-only transport, unless we already know the + * capacity will be decremented or is correct. */ + if (!(us->fflags & (US_FL_FIX_CAPACITY | US_FL_CAPACITY_OK | + US_FL_SCM_MULT_TARG)) && + us->protocol == USB_PR_BULK) + us->use_last_sector_hacks = 1; + + /* Check if write cache default on flag is set or not */ + if (us->fflags & US_FL_WRITE_CACHE) + sdev->wce_default_on = 1; + + /* A few buggy USB-ATA bridges don't understand FUA */ + if (us->fflags & US_FL_BROKEN_FUA) + sdev->broken_fua = 1; + + } else { + + /* Non-disk-type devices don't need to blacklist any pages + * or to force 192-byte transfer lengths for MODE SENSE. + * But they do need to use MODE SENSE(10). */ + sdev->use_10_for_ms = 1; + + /* Some (fake) usb cdrom devices don't like READ_DISC_INFO */ + if (us->fflags & US_FL_NO_READ_DISC_INFO) + sdev->no_read_disc_info = 1; + } + + /* The CB and CBI transports have no way to pass LUN values + * other than the bits in the second byte of a CDB. But those + * bits don't get set to the LUN value if the device reports + * scsi_level == 0 (UNKNOWN). Hence such devices must necessarily + * be single-LUN. + */ + if ((us->protocol == USB_PR_CB || us->protocol == USB_PR_CBI) && + sdev->scsi_level == SCSI_UNKNOWN) + us->max_lun = 0; + + /* Some devices choke when they receive a PREVENT-ALLOW MEDIUM + * REMOVAL command, so suppress those commands. */ + if (us->fflags & US_FL_NOT_LOCKABLE) + sdev->lockable = 0; + + /* this is to satisfy the compiler, tho I don't think the + * return code is ever checked anywhere. */ + return 0; +} + +static int target_alloc(struct scsi_target *starget) +{ + struct us_data *us = host_to_us(dev_to_shost(starget->dev.parent)); + + /* + * Some USB drives don't support REPORT LUNS, even though they + * report a SCSI revision level above 2. Tell the SCSI layer + * not to issue that command; it will perform a normal sequential + * scan instead. + */ + starget->no_report_luns = 1; + + /* + * The UFI spec treats the Peripheral Qualifier bits in an + * INQUIRY result as reserved and requires devices to set them + * to 0. However the SCSI spec requires these bits to be set + * to 3 to indicate when a LUN is not present. + * + * Let the scanning code know if this target merely sets + * Peripheral Device Type to 0x1f to indicate no LUN. + */ + if (us->subclass == USB_SC_UFI) + starget->pdt_1f_for_no_lun = 1; + + return 0; +} + +/* queue a command */ +/* This is always called with scsi_lock(host) held */ +static int queuecommand_lck(struct scsi_cmnd *srb, + void (*done)(struct scsi_cmnd *)) +{ + struct us_data *us = host_to_us(srb->device->host); + + /* check for state-transition errors */ + if (us->srb != NULL) { + printk(KERN_ERR USB_STORAGE "Error in %s: us->srb = %p\n", + __func__, us->srb); + return SCSI_MLQUEUE_HOST_BUSY; + } + + /* fail the command if we are disconnecting */ + if (test_bit(US_FLIDX_DISCONNECTING, &us->dflags)) { + usb_stor_dbg(us, "Fail command during disconnect\n"); + srb->result = DID_NO_CONNECT << 16; + done(srb); + return 0; + } + + /* enqueue the command and wake up the control thread */ + srb->scsi_done = done; + us->srb = srb; + complete(&us->cmnd_ready); + + return 0; +} + +static DEF_SCSI_QCMD(queuecommand) + +/*********************************************************************** + * Error handling functions + ***********************************************************************/ + +/* Command timeout and abort */ +static int command_abort(struct scsi_cmnd *srb) +{ + struct us_data *us = host_to_us(srb->device->host); + + usb_stor_dbg(us, "%s called\n", __func__); + + /* us->srb together with the TIMED_OUT, RESETTING, and ABORTING + * bits are protected by the host lock. */ + scsi_lock(us_to_host(us)); + + /* Is this command still active? */ + if (us->srb != srb) { + scsi_unlock(us_to_host(us)); + usb_stor_dbg(us, "-- nothing to abort\n"); + return FAILED; + } + + /* Set the TIMED_OUT bit. Also set the ABORTING bit, but only if + * a device reset isn't already in progress (to avoid interfering + * with the reset). Note that we must retain the host lock while + * calling usb_stor_stop_transport(); otherwise it might interfere + * with an auto-reset that begins as soon as we release the lock. */ + set_bit(US_FLIDX_TIMED_OUT, &us->dflags); + if (!test_bit(US_FLIDX_RESETTING, &us->dflags)) { + set_bit(US_FLIDX_ABORTING, &us->dflags); + usb_stor_stop_transport(us); + } + scsi_unlock(us_to_host(us)); + + /* Wait for the aborted command to finish */ + wait_for_completion(&us->notify); + return SUCCESS; +} + +/* This invokes the transport reset mechanism to reset the state of the + * device */ +static int device_reset(struct scsi_cmnd *srb) +{ + struct us_data *us = host_to_us(srb->device->host); + int result; + + usb_stor_dbg(us, "%s called\n", __func__); + + /* lock the device pointers and do the reset */ + mutex_lock(&(us->dev_mutex)); + result = us->transport_reset(us); + mutex_unlock(&us->dev_mutex); + + return result < 0 ? FAILED : SUCCESS; +} + +/* Simulate a SCSI bus reset by resetting the device's USB port. */ +static int bus_reset(struct scsi_cmnd *srb) +{ + struct us_data *us = host_to_us(srb->device->host); + int result; + + usb_stor_dbg(us, "%s called\n", __func__); + + result = usb_stor_port_reset(us); + return result < 0 ? FAILED : SUCCESS; +} + +/* Report a driver-initiated device reset to the SCSI layer. + * Calling this for a SCSI-initiated reset is unnecessary but harmless. + * The caller must own the SCSI host lock. */ +void usb_stor_report_device_reset(struct us_data *us) +{ + int i; + struct Scsi_Host *host = us_to_host(us); + + scsi_report_device_reset(host, 0, 0); + if (us->fflags & US_FL_SCM_MULT_TARG) { + for (i = 1; i < host->max_id; ++i) + scsi_report_device_reset(host, 0, i); + } +} + +/* Report a driver-initiated bus reset to the SCSI layer. + * Calling this for a SCSI-initiated reset is unnecessary but harmless. + * The caller must not own the SCSI host lock. */ +void usb_stor_report_bus_reset(struct us_data *us) +{ + struct Scsi_Host *host = us_to_host(us); + + scsi_lock(host); + scsi_report_bus_reset(host, 0); + scsi_unlock(host); +} + +/*********************************************************************** + * /proc/scsi/ functions + ***********************************************************************/ + +static int write_info(struct Scsi_Host *host, char *buffer, int length) +{ + /* if someone is sending us data, just throw it away */ + return length; +} + +/* we use this macro to help us write into the buffer */ +#undef SPRINTF +#define SPRINTF(args...) seq_printf(m, ## args) + +static int show_info (struct seq_file *m, struct Scsi_Host *host) +{ + struct us_data *us = host_to_us(host); + const char *string; + + /* print the controller name */ + SPRINTF(" Host scsi%d: usb-storage\n", host->host_no); + + /* print product, vendor, and serial number strings */ + if (us->pusb_dev->manufacturer) + string = us->pusb_dev->manufacturer; + else if (us->unusual_dev->vendorName) + string = us->unusual_dev->vendorName; + else + string = "Unknown"; + SPRINTF(" Vendor: %s\n", string); + if (us->pusb_dev->product) + string = us->pusb_dev->product; + else if (us->unusual_dev->productName) + string = us->unusual_dev->productName; + else + string = "Unknown"; + SPRINTF(" Product: %s\n", string); + if (us->pusb_dev->serial) + string = us->pusb_dev->serial; + else + string = "None"; + SPRINTF("Serial Number: %s\n", string); + + /* show the protocol and transport */ + SPRINTF(" Protocol: %s\n", us->protocol_name); + SPRINTF(" Transport: %s\n", us->transport_name); + + /* show the device flags */ + SPRINTF(" Quirks:"); + +#define US_FLAG(name, value) \ + if (us->fflags & value) seq_printf(m, " " #name); +US_DO_ALL_FLAGS +#undef US_FLAG + seq_putc(m, '\n'); + return 0; +} + +/*********************************************************************** + * Sysfs interface + ***********************************************************************/ + +/* Output routine for the sysfs max_sectors file */ +static ssize_t max_sectors_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct scsi_device *sdev = to_scsi_device(dev); + + return sprintf(buf, "%u\n", queue_max_hw_sectors(sdev->request_queue)); +} + +/* Input routine for the sysfs max_sectors file */ +static ssize_t max_sectors_store(struct device *dev, struct device_attribute *attr, const char *buf, + size_t count) +{ + struct scsi_device *sdev = to_scsi_device(dev); + unsigned short ms; + + if (sscanf(buf, "%hu", &ms) > 0) { + blk_queue_max_hw_sectors(sdev->request_queue, ms); + return count; + } + return -EINVAL; +} +static DEVICE_ATTR_RW(max_sectors); + +static struct device_attribute *sysfs_device_attr_list[] = { + &dev_attr_max_sectors, + NULL, +}; + +/* + * this defines our host template, with which we'll allocate hosts + */ + +struct scsi_host_template usb_stor_host_template = { + /* basic userland interface stuff */ + .name = "usb-storage", + .proc_name = "usb-storage", + .show_info = show_info, + .write_info = write_info, + .info = host_info, + + /* command interface -- queued only */ + .queuecommand = queuecommand, + + /* error and abort handlers */ + .eh_abort_handler = command_abort, + .eh_device_reset_handler = device_reset, + .eh_bus_reset_handler = bus_reset, + + /* queue commands only, only one command per LUN */ + .can_queue = 1, + .cmd_per_lun = 1, + + /* unknown initiator id */ + .this_id = -1, + + .slave_alloc = slave_alloc, + .slave_configure = slave_configure, + .target_alloc = target_alloc, + + /* lots of sg segments can be handled */ + .sg_tablesize = SCSI_MAX_SG_CHAIN_SEGMENTS, + + /* limit the total size of a transfer to 120 KB */ + .max_sectors = 240, + + /* merge commands... this seems to help performance, but + * periodically someone should test to see which setting is more + * optimal. + */ + .use_clustering = 1, + + /* emulated HBA */ + .emulated = 1, + + /* we do our own delay after a device or bus reset */ + .skip_settle_delay = 1, + + /* sysfs device attributes */ + .sdev_attrs = sysfs_device_attr_list, + + /* module management */ + .module = THIS_MODULE +}; + +/* To Report "Illegal Request: Invalid Field in CDB */ +unsigned char usb_stor_sense_invalidCDB[18] = { + [0] = 0x70, /* current error */ + [2] = ILLEGAL_REQUEST, /* Illegal Request = 0x05 */ + [7] = 0x0a, /* additional length */ + [12] = 0x24 /* Invalid Field in CDB */ +}; +EXPORT_SYMBOL_GPL(usb_stor_sense_invalidCDB); diff --git a/kernel/drivers/usb/storage/scsiglue.h b/kernel/drivers/usb/storage/scsiglue.h new file mode 100644 index 000000000..ffa1cca93 --- /dev/null +++ b/kernel/drivers/usb/storage/scsiglue.h @@ -0,0 +1,48 @@ +/* Driver for USB Mass Storage compliant devices + * SCSI Connecting Glue Header File + * + * Current development and maintenance by: + * (c) 1999, 2000 Matthew Dharm (mdharm-usb@one-eyed-alien.net) + * + * This driver is based on the 'USB Mass Storage Class' document. This + * describes in detail the protocol used to communicate with such + * devices. Clearly, the designers had SCSI and ATAPI commands in + * mind when they created this document. The commands are all very + * similar to commands in the SCSI-II and ATAPI specifications. + * + * It is important to note that in a number of cases this class + * exhibits class-specific exemptions from the USB specification. + * Notably the usage of NAK, STALL and ACK differs from the norm, in + * that they are used to communicate wait, failed and OK on commands. + * + * Also, for certain devices, the interrupt endpoint is used to convey + * status of a command. + * + * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more + * information about this driver. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _SCSIGLUE_H_ +#define _SCSIGLUE_H_ + +extern void usb_stor_report_device_reset(struct us_data *us); +extern void usb_stor_report_bus_reset(struct us_data *us); + +extern unsigned char usb_stor_sense_invalidCDB[18]; +extern struct scsi_host_template usb_stor_host_template; + +#endif diff --git a/kernel/drivers/usb/storage/sddr09.c b/kernel/drivers/usb/storage/sddr09.c new file mode 100644 index 000000000..3847053d7 --- /dev/null +++ b/kernel/drivers/usb/storage/sddr09.c @@ -0,0 +1,1782 @@ +/* Driver for SanDisk SDDR-09 SmartMedia reader + * + * (c) 2000, 2001 Robert Baruch (autophile@starband.net) + * (c) 2002 Andries Brouwer (aeb@cwi.nl) + * Developed with the assistance of: + * (c) 2002 Alan Stern <stern@rowland.org> + * + * The SanDisk SDDR-09 SmartMedia reader uses the Shuttle EUSB-01 chip. + * This chip is a programmable USB controller. In the SDDR-09, it has + * been programmed to obey a certain limited set of SCSI commands. + * This driver translates the "real" SCSI commands to the SDDR-09 SCSI + * commands. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* + * Known vendor commands: 12 bytes, first byte is opcode + * + * E7: read scatter gather + * E8: read + * E9: write + * EA: erase + * EB: reset + * EC: read status + * ED: read ID + * EE: write CIS (?) + * EF: compute checksum (?) + */ + +#include <linux/errno.h> +#include <linux/module.h> +#include <linux/slab.h> + +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_device.h> + +#include "usb.h" +#include "transport.h" +#include "protocol.h" +#include "debug.h" + +MODULE_DESCRIPTION("Driver for SanDisk SDDR-09 SmartMedia reader"); +MODULE_AUTHOR("Andries Brouwer <aeb@cwi.nl>, Robert Baruch <autophile@starband.net>"); +MODULE_LICENSE("GPL"); + +static int usb_stor_sddr09_dpcm_init(struct us_data *us); +static int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us); +static int usb_stor_sddr09_init(struct us_data *us); + + +/* + * The table of devices + */ +#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ + vendorName, productName, useProtocol, useTransport, \ + initFunction, flags) \ +{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ + .driver_info = (flags) } + +static struct usb_device_id sddr09_usb_ids[] = { +# include "unusual_sddr09.h" + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, sddr09_usb_ids); + +#undef UNUSUAL_DEV + +/* + * The flags table + */ +#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \ + vendor_name, product_name, use_protocol, use_transport, \ + init_function, Flags) \ +{ \ + .vendorName = vendor_name, \ + .productName = product_name, \ + .useProtocol = use_protocol, \ + .useTransport = use_transport, \ + .initFunction = init_function, \ +} + +static struct us_unusual_dev sddr09_unusual_dev_list[] = { +# include "unusual_sddr09.h" + { } /* Terminating entry */ +}; + +#undef UNUSUAL_DEV + + +#define short_pack(lsb,msb) ( ((u16)(lsb)) | ( ((u16)(msb))<<8 ) ) +#define LSB_of(s) ((s)&0xFF) +#define MSB_of(s) ((s)>>8) + +/* + * First some stuff that does not belong here: + * data on SmartMedia and other cards, completely + * unrelated to this driver. + * Similar stuff occurs in <linux/mtd/nand_ids.h>. + */ + +struct nand_flash_dev { + int model_id; + int chipshift; /* 1<<cs bytes total capacity */ + char pageshift; /* 1<<ps bytes in a page */ + char blockshift; /* 1<<bs pages in an erase block */ + char zoneshift; /* 1<<zs blocks in a zone */ + /* # of logical blocks is 125/128 of this */ + char pageadrlen; /* length of an address in bytes - 1 */ +}; + +/* + * NAND Flash Manufacturer ID Codes + */ +#define NAND_MFR_AMD 0x01 +#define NAND_MFR_NATSEMI 0x8f +#define NAND_MFR_TOSHIBA 0x98 +#define NAND_MFR_SAMSUNG 0xec + +static inline char *nand_flash_manufacturer(int manuf_id) { + switch(manuf_id) { + case NAND_MFR_AMD: + return "AMD"; + case NAND_MFR_NATSEMI: + return "NATSEMI"; + case NAND_MFR_TOSHIBA: + return "Toshiba"; + case NAND_MFR_SAMSUNG: + return "Samsung"; + default: + return "unknown"; + } +} + +/* + * It looks like it is unnecessary to attach manufacturer to the + * remaining data: SSFDC prescribes manufacturer-independent id codes. + * + * 256 MB NAND flash has a 5-byte ID with 2nd byte 0xaa, 0xba, 0xca or 0xda. + */ + +static struct nand_flash_dev nand_flash_ids[] = { + /* NAND flash */ + { 0x6e, 20, 8, 4, 8, 2}, /* 1 MB */ + { 0xe8, 20, 8, 4, 8, 2}, /* 1 MB */ + { 0xec, 20, 8, 4, 8, 2}, /* 1 MB */ + { 0x64, 21, 8, 4, 9, 2}, /* 2 MB */ + { 0xea, 21, 8, 4, 9, 2}, /* 2 MB */ + { 0x6b, 22, 9, 4, 9, 2}, /* 4 MB */ + { 0xe3, 22, 9, 4, 9, 2}, /* 4 MB */ + { 0xe5, 22, 9, 4, 9, 2}, /* 4 MB */ + { 0xe6, 23, 9, 4, 10, 2}, /* 8 MB */ + { 0x73, 24, 9, 5, 10, 2}, /* 16 MB */ + { 0x75, 25, 9, 5, 10, 2}, /* 32 MB */ + { 0x76, 26, 9, 5, 10, 3}, /* 64 MB */ + { 0x79, 27, 9, 5, 10, 3}, /* 128 MB */ + + /* MASK ROM */ + { 0x5d, 21, 9, 4, 8, 2}, /* 2 MB */ + { 0xd5, 22, 9, 4, 9, 2}, /* 4 MB */ + { 0xd6, 23, 9, 4, 10, 2}, /* 8 MB */ + { 0x57, 24, 9, 4, 11, 2}, /* 16 MB */ + { 0x58, 25, 9, 4, 12, 2}, /* 32 MB */ + { 0,} +}; + +static struct nand_flash_dev * +nand_find_id(unsigned char id) { + int i; + + for (i = 0; i < ARRAY_SIZE(nand_flash_ids); i++) + if (nand_flash_ids[i].model_id == id) + return &(nand_flash_ids[i]); + return NULL; +} + +/* + * ECC computation. + */ +static unsigned char parity[256]; +static unsigned char ecc2[256]; + +static void nand_init_ecc(void) { + int i, j, a; + + parity[0] = 0; + for (i = 1; i < 256; i++) + parity[i] = (parity[i&(i-1)] ^ 1); + + for (i = 0; i < 256; i++) { + a = 0; + for (j = 0; j < 8; j++) { + if (i & (1<<j)) { + if ((j & 1) == 0) + a ^= 0x04; + if ((j & 2) == 0) + a ^= 0x10; + if ((j & 4) == 0) + a ^= 0x40; + } + } + ecc2[i] = ~(a ^ (a<<1) ^ (parity[i] ? 0xa8 : 0)); + } +} + +/* compute 3-byte ecc on 256 bytes */ +static void nand_compute_ecc(unsigned char *data, unsigned char *ecc) { + int i, j, a; + unsigned char par = 0, bit, bits[8] = {0}; + + /* collect 16 checksum bits */ + for (i = 0; i < 256; i++) { + par ^= data[i]; + bit = parity[data[i]]; + for (j = 0; j < 8; j++) + if ((i & (1<<j)) == 0) + bits[j] ^= bit; + } + + /* put 4+4+4 = 12 bits in the ecc */ + a = (bits[3] << 6) + (bits[2] << 4) + (bits[1] << 2) + bits[0]; + ecc[0] = ~(a ^ (a<<1) ^ (parity[par] ? 0xaa : 0)); + + a = (bits[7] << 6) + (bits[6] << 4) + (bits[5] << 2) + bits[4]; + ecc[1] = ~(a ^ (a<<1) ^ (parity[par] ? 0xaa : 0)); + + ecc[2] = ecc2[par]; +} + +static int nand_compare_ecc(unsigned char *data, unsigned char *ecc) { + return (data[0] == ecc[0] && data[1] == ecc[1] && data[2] == ecc[2]); +} + +static void nand_store_ecc(unsigned char *data, unsigned char *ecc) { + memcpy(data, ecc, 3); +} + +/* + * The actual driver starts here. + */ + +struct sddr09_card_info { + unsigned long capacity; /* Size of card in bytes */ + int pagesize; /* Size of page in bytes */ + int pageshift; /* log2 of pagesize */ + int blocksize; /* Size of block in pages */ + int blockshift; /* log2 of blocksize */ + int blockmask; /* 2^blockshift - 1 */ + int *lba_to_pba; /* logical to physical map */ + int *pba_to_lba; /* physical to logical map */ + int lbact; /* number of available pages */ + int flags; +#define SDDR09_WP 1 /* write protected */ +}; + +/* + * On my 16MB card, control blocks have size 64 (16 real control bytes, + * and 48 junk bytes). In reality of course the card uses 16 control bytes, + * so the reader makes up the remaining 48. Don't know whether these numbers + * depend on the card. For now a constant. + */ +#define CONTROL_SHIFT 6 + +/* + * On my Combo CF/SM reader, the SM reader has LUN 1. + * (and things fail with LUN 0). + * It seems LUN is irrelevant for others. + */ +#define LUN 1 +#define LUNBITS (LUN << 5) + +/* + * LBA and PBA are unsigned ints. Special values. + */ +#define UNDEF 0xffffffff +#define SPARE 0xfffffffe +#define UNUSABLE 0xfffffffd + +static const int erase_bad_lba_entries = 0; + +/* send vendor interface command (0x41) */ +/* called for requests 0, 1, 8 */ +static int +sddr09_send_command(struct us_data *us, + unsigned char request, + unsigned char direction, + unsigned char *xfer_data, + unsigned int xfer_len) { + unsigned int pipe; + unsigned char requesttype = (0x41 | direction); + int rc; + + // Get the receive or send control pipe number + + if (direction == USB_DIR_IN) + pipe = us->recv_ctrl_pipe; + else + pipe = us->send_ctrl_pipe; + + rc = usb_stor_ctrl_transfer(us, pipe, request, requesttype, + 0, 0, xfer_data, xfer_len); + switch (rc) { + case USB_STOR_XFER_GOOD: return 0; + case USB_STOR_XFER_STALLED: return -EPIPE; + default: return -EIO; + } +} + +static int +sddr09_send_scsi_command(struct us_data *us, + unsigned char *command, + unsigned int command_len) { + return sddr09_send_command(us, 0, USB_DIR_OUT, command, command_len); +} + +#if 0 +/* + * Test Unit Ready Command: 12 bytes. + * byte 0: opcode: 00 + */ +static int +sddr09_test_unit_ready(struct us_data *us) { + unsigned char *command = us->iobuf; + int result; + + memset(command, 0, 6); + command[1] = LUNBITS; + + result = sddr09_send_scsi_command(us, command, 6); + + usb_stor_dbg(us, "sddr09_test_unit_ready returns %d\n", result); + + return result; +} +#endif + +/* + * Request Sense Command: 12 bytes. + * byte 0: opcode: 03 + * byte 4: data length + */ +static int +sddr09_request_sense(struct us_data *us, unsigned char *sensebuf, int buflen) { + unsigned char *command = us->iobuf; + int result; + + memset(command, 0, 12); + command[0] = 0x03; + command[1] = LUNBITS; + command[4] = buflen; + + result = sddr09_send_scsi_command(us, command, 12); + if (result) + return result; + + result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, + sensebuf, buflen, NULL); + return (result == USB_STOR_XFER_GOOD ? 0 : -EIO); +} + +/* + * Read Command: 12 bytes. + * byte 0: opcode: E8 + * byte 1: last two bits: 00: read data, 01: read blockwise control, + * 10: read both, 11: read pagewise control. + * It turns out we need values 20, 21, 22, 23 here (LUN 1). + * bytes 2-5: address (interpretation depends on byte 1, see below) + * bytes 10-11: count (idem) + * + * A page has 512 data bytes and 64 control bytes (16 control and 48 junk). + * A read data command gets data in 512-byte pages. + * A read control command gets control in 64-byte chunks. + * A read both command gets data+control in 576-byte chunks. + * + * Blocks are groups of 32 pages, and read blockwise control jumps to the + * next block, while read pagewise control jumps to the next page after + * reading a group of 64 control bytes. + * [Here 512 = 1<<pageshift, 32 = 1<<blockshift, 64 is constant?] + * + * (1 MB and 2 MB cards are a bit different, but I have only a 16 MB card.) + */ + +static int +sddr09_readX(struct us_data *us, int x, unsigned long fromaddress, + int nr_of_pages, int bulklen, unsigned char *buf, + int use_sg) { + + unsigned char *command = us->iobuf; + int result; + + command[0] = 0xE8; + command[1] = LUNBITS | x; + command[2] = MSB_of(fromaddress>>16); + command[3] = LSB_of(fromaddress>>16); + command[4] = MSB_of(fromaddress & 0xFFFF); + command[5] = LSB_of(fromaddress & 0xFFFF); + command[6] = 0; + command[7] = 0; + command[8] = 0; + command[9] = 0; + command[10] = MSB_of(nr_of_pages); + command[11] = LSB_of(nr_of_pages); + + result = sddr09_send_scsi_command(us, command, 12); + + if (result) { + usb_stor_dbg(us, "Result for send_control in sddr09_read2%d %d\n", + x, result); + return result; + } + + result = usb_stor_bulk_transfer_sg(us, us->recv_bulk_pipe, + buf, bulklen, use_sg, NULL); + + if (result != USB_STOR_XFER_GOOD) { + usb_stor_dbg(us, "Result for bulk_transfer in sddr09_read2%d %d\n", + x, result); + return -EIO; + } + return 0; +} + +/* + * Read Data + * + * fromaddress counts data shorts: + * increasing it by 256 shifts the bytestream by 512 bytes; + * the last 8 bits are ignored. + * + * nr_of_pages counts pages of size (1 << pageshift). + */ +static int +sddr09_read20(struct us_data *us, unsigned long fromaddress, + int nr_of_pages, int pageshift, unsigned char *buf, int use_sg) { + int bulklen = nr_of_pages << pageshift; + + /* The last 8 bits of fromaddress are ignored. */ + return sddr09_readX(us, 0, fromaddress, nr_of_pages, bulklen, + buf, use_sg); +} + +/* + * Read Blockwise Control + * + * fromaddress gives the starting position (as in read data; + * the last 8 bits are ignored); increasing it by 32*256 shifts + * the output stream by 64 bytes. + * + * count counts control groups of size (1 << controlshift). + * For me, controlshift = 6. Is this constant? + * + * After getting one control group, jump to the next block + * (fromaddress += 8192). + */ +static int +sddr09_read21(struct us_data *us, unsigned long fromaddress, + int count, int controlshift, unsigned char *buf, int use_sg) { + + int bulklen = (count << controlshift); + return sddr09_readX(us, 1, fromaddress, count, bulklen, + buf, use_sg); +} + +/* + * Read both Data and Control + * + * fromaddress counts data shorts, ignoring control: + * increasing it by 256 shifts the bytestream by 576 = 512+64 bytes; + * the last 8 bits are ignored. + * + * nr_of_pages counts pages of size (1 << pageshift) + (1 << controlshift). + */ +static int +sddr09_read22(struct us_data *us, unsigned long fromaddress, + int nr_of_pages, int pageshift, unsigned char *buf, int use_sg) { + + int bulklen = (nr_of_pages << pageshift) + (nr_of_pages << CONTROL_SHIFT); + usb_stor_dbg(us, "reading %d pages, %d bytes\n", nr_of_pages, bulklen); + return sddr09_readX(us, 2, fromaddress, nr_of_pages, bulklen, + buf, use_sg); +} + +#if 0 +/* + * Read Pagewise Control + * + * fromaddress gives the starting position (as in read data; + * the last 8 bits are ignored); increasing it by 256 shifts + * the output stream by 64 bytes. + * + * count counts control groups of size (1 << controlshift). + * For me, controlshift = 6. Is this constant? + * + * After getting one control group, jump to the next page + * (fromaddress += 256). + */ +static int +sddr09_read23(struct us_data *us, unsigned long fromaddress, + int count, int controlshift, unsigned char *buf, int use_sg) { + + int bulklen = (count << controlshift); + return sddr09_readX(us, 3, fromaddress, count, bulklen, + buf, use_sg); +} +#endif + +/* + * Erase Command: 12 bytes. + * byte 0: opcode: EA + * bytes 6-9: erase address (big-endian, counting shorts, sector aligned). + * + * Always precisely one block is erased; bytes 2-5 and 10-11 are ignored. + * The byte address being erased is 2*Eaddress. + * The CIS cannot be erased. + */ +static int +sddr09_erase(struct us_data *us, unsigned long Eaddress) { + unsigned char *command = us->iobuf; + int result; + + usb_stor_dbg(us, "erase address %lu\n", Eaddress); + + memset(command, 0, 12); + command[0] = 0xEA; + command[1] = LUNBITS; + command[6] = MSB_of(Eaddress>>16); + command[7] = LSB_of(Eaddress>>16); + command[8] = MSB_of(Eaddress & 0xFFFF); + command[9] = LSB_of(Eaddress & 0xFFFF); + + result = sddr09_send_scsi_command(us, command, 12); + + if (result) + usb_stor_dbg(us, "Result for send_control in sddr09_erase %d\n", + result); + + return result; +} + +/* + * Write CIS Command: 12 bytes. + * byte 0: opcode: EE + * bytes 2-5: write address in shorts + * bytes 10-11: sector count + * + * This writes at the indicated address. Don't know how it differs + * from E9. Maybe it does not erase? However, it will also write to + * the CIS. + * + * When two such commands on the same page follow each other directly, + * the second one is not done. + */ + +/* + * Write Command: 12 bytes. + * byte 0: opcode: E9 + * bytes 2-5: write address (big-endian, counting shorts, sector aligned). + * bytes 6-9: erase address (big-endian, counting shorts, sector aligned). + * bytes 10-11: sector count (big-endian, in 512-byte sectors). + * + * If write address equals erase address, the erase is done first, + * otherwise the write is done first. When erase address equals zero + * no erase is done? + */ +static int +sddr09_writeX(struct us_data *us, + unsigned long Waddress, unsigned long Eaddress, + int nr_of_pages, int bulklen, unsigned char *buf, int use_sg) { + + unsigned char *command = us->iobuf; + int result; + + command[0] = 0xE9; + command[1] = LUNBITS; + + command[2] = MSB_of(Waddress>>16); + command[3] = LSB_of(Waddress>>16); + command[4] = MSB_of(Waddress & 0xFFFF); + command[5] = LSB_of(Waddress & 0xFFFF); + + command[6] = MSB_of(Eaddress>>16); + command[7] = LSB_of(Eaddress>>16); + command[8] = MSB_of(Eaddress & 0xFFFF); + command[9] = LSB_of(Eaddress & 0xFFFF); + + command[10] = MSB_of(nr_of_pages); + command[11] = LSB_of(nr_of_pages); + + result = sddr09_send_scsi_command(us, command, 12); + + if (result) { + usb_stor_dbg(us, "Result for send_control in sddr09_writeX %d\n", + result); + return result; + } + + result = usb_stor_bulk_transfer_sg(us, us->send_bulk_pipe, + buf, bulklen, use_sg, NULL); + + if (result != USB_STOR_XFER_GOOD) { + usb_stor_dbg(us, "Result for bulk_transfer in sddr09_writeX %d\n", + result); + return -EIO; + } + return 0; +} + +/* erase address, write same address */ +static int +sddr09_write_inplace(struct us_data *us, unsigned long address, + int nr_of_pages, int pageshift, unsigned char *buf, + int use_sg) { + int bulklen = (nr_of_pages << pageshift) + (nr_of_pages << CONTROL_SHIFT); + return sddr09_writeX(us, address, address, nr_of_pages, bulklen, + buf, use_sg); +} + +#if 0 +/* + * Read Scatter Gather Command: 3+4n bytes. + * byte 0: opcode E7 + * byte 2: n + * bytes 4i-1,4i,4i+1: page address + * byte 4i+2: page count + * (i=1..n) + * + * This reads several pages from the card to a single memory buffer. + * The last two bits of byte 1 have the same meaning as for E8. + */ +static int +sddr09_read_sg_test_only(struct us_data *us) { + unsigned char *command = us->iobuf; + int result, bulklen, nsg, ct; + unsigned char *buf; + unsigned long address; + + nsg = bulklen = 0; + command[0] = 0xE7; + command[1] = LUNBITS; + command[2] = 0; + address = 040000; ct = 1; + nsg++; + bulklen += (ct << 9); + command[4*nsg+2] = ct; + command[4*nsg+1] = ((address >> 9) & 0xFF); + command[4*nsg+0] = ((address >> 17) & 0xFF); + command[4*nsg-1] = ((address >> 25) & 0xFF); + + address = 0340000; ct = 1; + nsg++; + bulklen += (ct << 9); + command[4*nsg+2] = ct; + command[4*nsg+1] = ((address >> 9) & 0xFF); + command[4*nsg+0] = ((address >> 17) & 0xFF); + command[4*nsg-1] = ((address >> 25) & 0xFF); + + address = 01000000; ct = 2; + nsg++; + bulklen += (ct << 9); + command[4*nsg+2] = ct; + command[4*nsg+1] = ((address >> 9) & 0xFF); + command[4*nsg+0] = ((address >> 17) & 0xFF); + command[4*nsg-1] = ((address >> 25) & 0xFF); + + command[2] = nsg; + + result = sddr09_send_scsi_command(us, command, 4*nsg+3); + + if (result) { + usb_stor_dbg(us, "Result for send_control in sddr09_read_sg %d\n", + result); + return result; + } + + buf = kmalloc(bulklen, GFP_NOIO); + if (!buf) + return -ENOMEM; + + result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, + buf, bulklen, NULL); + kfree(buf); + if (result != USB_STOR_XFER_GOOD) { + usb_stor_dbg(us, "Result for bulk_transfer in sddr09_read_sg %d\n", + result); + return -EIO; + } + + return 0; +} +#endif + +/* + * Read Status Command: 12 bytes. + * byte 0: opcode: EC + * + * Returns 64 bytes, all zero except for the first. + * bit 0: 1: Error + * bit 5: 1: Suspended + * bit 6: 1: Ready + * bit 7: 1: Not write-protected + */ + +static int +sddr09_read_status(struct us_data *us, unsigned char *status) { + + unsigned char *command = us->iobuf; + unsigned char *data = us->iobuf; + int result; + + usb_stor_dbg(us, "Reading status...\n"); + + memset(command, 0, 12); + command[0] = 0xEC; + command[1] = LUNBITS; + + result = sddr09_send_scsi_command(us, command, 12); + if (result) + return result; + + result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, + data, 64, NULL); + *status = data[0]; + return (result == USB_STOR_XFER_GOOD ? 0 : -EIO); +} + +static int +sddr09_read_data(struct us_data *us, + unsigned long address, + unsigned int sectors) { + + struct sddr09_card_info *info = (struct sddr09_card_info *) us->extra; + unsigned char *buffer; + unsigned int lba, maxlba, pba; + unsigned int page, pages; + unsigned int len, offset; + struct scatterlist *sg; + int result; + + // Figure out the initial LBA and page + lba = address >> info->blockshift; + page = (address & info->blockmask); + maxlba = info->capacity >> (info->pageshift + info->blockshift); + if (lba >= maxlba) + return -EIO; + + // Since we only read in one block at a time, we have to create + // a bounce buffer and move the data a piece at a time between the + // bounce buffer and the actual transfer buffer. + + len = min(sectors, (unsigned int) info->blocksize) * info->pagesize; + buffer = kmalloc(len, GFP_NOIO); + if (buffer == NULL) { + printk(KERN_WARNING "sddr09_read_data: Out of memory\n"); + return -ENOMEM; + } + + // This could be made much more efficient by checking for + // contiguous LBA's. Another exercise left to the student. + + result = 0; + offset = 0; + sg = NULL; + + while (sectors > 0) { + + /* Find number of pages we can read in this block */ + pages = min(sectors, info->blocksize - page); + len = pages << info->pageshift; + + /* Not overflowing capacity? */ + if (lba >= maxlba) { + usb_stor_dbg(us, "Error: Requested lba %u exceeds maximum %u\n", + lba, maxlba); + result = -EIO; + break; + } + + /* Find where this lba lives on disk */ + pba = info->lba_to_pba[lba]; + + if (pba == UNDEF) { /* this lba was never written */ + + usb_stor_dbg(us, "Read %d zero pages (LBA %d) page %d\n", + pages, lba, page); + + /* This is not really an error. It just means + that the block has never been written. + Instead of returning an error + it is better to return all zero data. */ + + memset(buffer, 0, len); + + } else { + usb_stor_dbg(us, "Read %d pages, from PBA %d (LBA %d) page %d\n", + pages, pba, lba, page); + + address = ((pba << info->blockshift) + page) << + info->pageshift; + + result = sddr09_read20(us, address>>1, + pages, info->pageshift, buffer, 0); + if (result) + break; + } + + // Store the data in the transfer buffer + usb_stor_access_xfer_buf(buffer, len, us->srb, + &sg, &offset, TO_XFER_BUF); + + page = 0; + lba++; + sectors -= pages; + } + + kfree(buffer); + return result; +} + +static unsigned int +sddr09_find_unused_pba(struct sddr09_card_info *info, unsigned int lba) { + static unsigned int lastpba = 1; + int zonestart, end, i; + + zonestart = (lba/1000) << 10; + end = info->capacity >> (info->blockshift + info->pageshift); + end -= zonestart; + if (end > 1024) + end = 1024; + + for (i = lastpba+1; i < end; i++) { + if (info->pba_to_lba[zonestart+i] == UNDEF) { + lastpba = i; + return zonestart+i; + } + } + for (i = 0; i <= lastpba; i++) { + if (info->pba_to_lba[zonestart+i] == UNDEF) { + lastpba = i; + return zonestart+i; + } + } + return 0; +} + +static int +sddr09_write_lba(struct us_data *us, unsigned int lba, + unsigned int page, unsigned int pages, + unsigned char *ptr, unsigned char *blockbuffer) { + + struct sddr09_card_info *info = (struct sddr09_card_info *) us->extra; + unsigned long address; + unsigned int pba, lbap; + unsigned int pagelen; + unsigned char *bptr, *cptr, *xptr; + unsigned char ecc[3]; + int i, result, isnew; + + lbap = ((lba % 1000) << 1) | 0x1000; + if (parity[MSB_of(lbap) ^ LSB_of(lbap)]) + lbap ^= 1; + pba = info->lba_to_pba[lba]; + isnew = 0; + + if (pba == UNDEF) { + pba = sddr09_find_unused_pba(info, lba); + if (!pba) { + printk(KERN_WARNING + "sddr09_write_lba: Out of unused blocks\n"); + return -ENOSPC; + } + info->pba_to_lba[pba] = lba; + info->lba_to_pba[lba] = pba; + isnew = 1; + } + + if (pba == 1) { + /* Maybe it is impossible to write to PBA 1. + Fake success, but don't do anything. */ + printk(KERN_WARNING "sddr09: avoid writing to pba 1\n"); + return 0; + } + + pagelen = (1 << info->pageshift) + (1 << CONTROL_SHIFT); + + /* read old contents */ + address = (pba << (info->pageshift + info->blockshift)); + result = sddr09_read22(us, address>>1, info->blocksize, + info->pageshift, blockbuffer, 0); + if (result) + return result; + + /* check old contents and fill lba */ + for (i = 0; i < info->blocksize; i++) { + bptr = blockbuffer + i*pagelen; + cptr = bptr + info->pagesize; + nand_compute_ecc(bptr, ecc); + if (!nand_compare_ecc(cptr+13, ecc)) { + usb_stor_dbg(us, "Warning: bad ecc in page %d- of pba %d\n", + i, pba); + nand_store_ecc(cptr+13, ecc); + } + nand_compute_ecc(bptr+(info->pagesize / 2), ecc); + if (!nand_compare_ecc(cptr+8, ecc)) { + usb_stor_dbg(us, "Warning: bad ecc in page %d+ of pba %d\n", + i, pba); + nand_store_ecc(cptr+8, ecc); + } + cptr[6] = cptr[11] = MSB_of(lbap); + cptr[7] = cptr[12] = LSB_of(lbap); + } + + /* copy in new stuff and compute ECC */ + xptr = ptr; + for (i = page; i < page+pages; i++) { + bptr = blockbuffer + i*pagelen; + cptr = bptr + info->pagesize; + memcpy(bptr, xptr, info->pagesize); + xptr += info->pagesize; + nand_compute_ecc(bptr, ecc); + nand_store_ecc(cptr+13, ecc); + nand_compute_ecc(bptr+(info->pagesize / 2), ecc); + nand_store_ecc(cptr+8, ecc); + } + + usb_stor_dbg(us, "Rewrite PBA %d (LBA %d)\n", pba, lba); + + result = sddr09_write_inplace(us, address>>1, info->blocksize, + info->pageshift, blockbuffer, 0); + + usb_stor_dbg(us, "sddr09_write_inplace returns %d\n", result); + +#if 0 + { + unsigned char status = 0; + int result2 = sddr09_read_status(us, &status); + if (result2) + usb_stor_dbg(us, "cannot read status\n"); + else if (status != 0xc0) + usb_stor_dbg(us, "status after write: 0x%x\n", status); + } +#endif + +#if 0 + { + int result2 = sddr09_test_unit_ready(us); + } +#endif + + return result; +} + +static int +sddr09_write_data(struct us_data *us, + unsigned long address, + unsigned int sectors) { + + struct sddr09_card_info *info = (struct sddr09_card_info *) us->extra; + unsigned int lba, maxlba, page, pages; + unsigned int pagelen, blocklen; + unsigned char *blockbuffer; + unsigned char *buffer; + unsigned int len, offset; + struct scatterlist *sg; + int result; + + // Figure out the initial LBA and page + lba = address >> info->blockshift; + page = (address & info->blockmask); + maxlba = info->capacity >> (info->pageshift + info->blockshift); + if (lba >= maxlba) + return -EIO; + + // blockbuffer is used for reading in the old data, overwriting + // with the new data, and performing ECC calculations + + /* TODO: instead of doing kmalloc/kfree for each write, + add a bufferpointer to the info structure */ + + pagelen = (1 << info->pageshift) + (1 << CONTROL_SHIFT); + blocklen = (pagelen << info->blockshift); + blockbuffer = kmalloc(blocklen, GFP_NOIO); + if (!blockbuffer) { + printk(KERN_WARNING "sddr09_write_data: Out of memory\n"); + return -ENOMEM; + } + + // Since we don't write the user data directly to the device, + // we have to create a bounce buffer and move the data a piece + // at a time between the bounce buffer and the actual transfer buffer. + + len = min(sectors, (unsigned int) info->blocksize) * info->pagesize; + buffer = kmalloc(len, GFP_NOIO); + if (buffer == NULL) { + printk(KERN_WARNING "sddr09_write_data: Out of memory\n"); + kfree(blockbuffer); + return -ENOMEM; + } + + result = 0; + offset = 0; + sg = NULL; + + while (sectors > 0) { + + // Write as many sectors as possible in this block + + pages = min(sectors, info->blocksize - page); + len = (pages << info->pageshift); + + /* Not overflowing capacity? */ + if (lba >= maxlba) { + usb_stor_dbg(us, "Error: Requested lba %u exceeds maximum %u\n", + lba, maxlba); + result = -EIO; + break; + } + + // Get the data from the transfer buffer + usb_stor_access_xfer_buf(buffer, len, us->srb, + &sg, &offset, FROM_XFER_BUF); + + result = sddr09_write_lba(us, lba, page, pages, + buffer, blockbuffer); + if (result) + break; + + page = 0; + lba++; + sectors -= pages; + } + + kfree(buffer); + kfree(blockbuffer); + + return result; +} + +static int +sddr09_read_control(struct us_data *us, + unsigned long address, + unsigned int blocks, + unsigned char *content, + int use_sg) { + + usb_stor_dbg(us, "Read control address %lu, blocks %d\n", + address, blocks); + + return sddr09_read21(us, address, blocks, + CONTROL_SHIFT, content, use_sg); +} + +/* + * Read Device ID Command: 12 bytes. + * byte 0: opcode: ED + * + * Returns 2 bytes: Manufacturer ID and Device ID. + * On more recent cards 3 bytes: the third byte is an option code A5 + * signifying that the secret command to read an 128-bit ID is available. + * On still more recent cards 4 bytes: the fourth byte C0 means that + * a second read ID cmd is available. + */ +static int +sddr09_read_deviceID(struct us_data *us, unsigned char *deviceID) { + unsigned char *command = us->iobuf; + unsigned char *content = us->iobuf; + int result, i; + + memset(command, 0, 12); + command[0] = 0xED; + command[1] = LUNBITS; + + result = sddr09_send_scsi_command(us, command, 12); + if (result) + return result; + + result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, + content, 64, NULL); + + for (i = 0; i < 4; i++) + deviceID[i] = content[i]; + + return (result == USB_STOR_XFER_GOOD ? 0 : -EIO); +} + +static int +sddr09_get_wp(struct us_data *us, struct sddr09_card_info *info) { + int result; + unsigned char status; + + result = sddr09_read_status(us, &status); + if (result) { + usb_stor_dbg(us, "read_status fails\n"); + return result; + } + usb_stor_dbg(us, "status 0x%02X", status); + if ((status & 0x80) == 0) { + info->flags |= SDDR09_WP; /* write protected */ + US_DEBUGPX(" WP"); + } + if (status & 0x40) + US_DEBUGPX(" Ready"); + if (status & LUNBITS) + US_DEBUGPX(" Suspended"); + if (status & 0x1) + US_DEBUGPX(" Error"); + US_DEBUGPX("\n"); + return 0; +} + +#if 0 +/* + * Reset Command: 12 bytes. + * byte 0: opcode: EB + */ +static int +sddr09_reset(struct us_data *us) { + + unsigned char *command = us->iobuf; + + memset(command, 0, 12); + command[0] = 0xEB; + command[1] = LUNBITS; + + return sddr09_send_scsi_command(us, command, 12); +} +#endif + +static struct nand_flash_dev * +sddr09_get_cardinfo(struct us_data *us, unsigned char flags) { + struct nand_flash_dev *cardinfo; + unsigned char deviceID[4]; + char blurbtxt[256]; + int result; + + usb_stor_dbg(us, "Reading capacity...\n"); + + result = sddr09_read_deviceID(us, deviceID); + + if (result) { + usb_stor_dbg(us, "Result of read_deviceID is %d\n", result); + printk(KERN_WARNING "sddr09: could not read card info\n"); + return NULL; + } + + sprintf(blurbtxt, "sddr09: Found Flash card, ID = %4ph", deviceID); + + /* Byte 0 is the manufacturer */ + sprintf(blurbtxt + strlen(blurbtxt), + ": Manuf. %s", + nand_flash_manufacturer(deviceID[0])); + + /* Byte 1 is the device type */ + cardinfo = nand_find_id(deviceID[1]); + if (cardinfo) { + /* MB or MiB? It is neither. A 16 MB card has + 17301504 raw bytes, of which 16384000 are + usable for user data. */ + sprintf(blurbtxt + strlen(blurbtxt), + ", %d MB", 1<<(cardinfo->chipshift - 20)); + } else { + sprintf(blurbtxt + strlen(blurbtxt), + ", type unrecognized"); + } + + /* Byte 2 is code to signal availability of 128-bit ID */ + if (deviceID[2] == 0xa5) { + sprintf(blurbtxt + strlen(blurbtxt), + ", 128-bit ID"); + } + + /* Byte 3 announces the availability of another read ID command */ + if (deviceID[3] == 0xc0) { + sprintf(blurbtxt + strlen(blurbtxt), + ", extra cmd"); + } + + if (flags & SDDR09_WP) + sprintf(blurbtxt + strlen(blurbtxt), + ", WP"); + + printk(KERN_WARNING "%s\n", blurbtxt); + + return cardinfo; +} + +static int +sddr09_read_map(struct us_data *us) { + + struct sddr09_card_info *info = (struct sddr09_card_info *) us->extra; + int numblocks, alloc_len, alloc_blocks; + int i, j, result; + unsigned char *buffer, *buffer_end, *ptr; + unsigned int lba, lbact; + + if (!info->capacity) + return -1; + + // size of a block is 1 << (blockshift + pageshift) bytes + // divide into the total capacity to get the number of blocks + + numblocks = info->capacity >> (info->blockshift + info->pageshift); + + // read 64 bytes for every block (actually 1 << CONTROL_SHIFT) + // but only use a 64 KB buffer + // buffer size used must be a multiple of (1 << CONTROL_SHIFT) +#define SDDR09_READ_MAP_BUFSZ 65536 + + alloc_blocks = min(numblocks, SDDR09_READ_MAP_BUFSZ >> CONTROL_SHIFT); + alloc_len = (alloc_blocks << CONTROL_SHIFT); + buffer = kmalloc(alloc_len, GFP_NOIO); + if (buffer == NULL) { + printk(KERN_WARNING "sddr09_read_map: out of memory\n"); + result = -1; + goto done; + } + buffer_end = buffer + alloc_len; + +#undef SDDR09_READ_MAP_BUFSZ + + kfree(info->lba_to_pba); + kfree(info->pba_to_lba); + info->lba_to_pba = kmalloc(numblocks*sizeof(int), GFP_NOIO); + info->pba_to_lba = kmalloc(numblocks*sizeof(int), GFP_NOIO); + + if (info->lba_to_pba == NULL || info->pba_to_lba == NULL) { + printk(KERN_WARNING "sddr09_read_map: out of memory\n"); + result = -1; + goto done; + } + + for (i = 0; i < numblocks; i++) + info->lba_to_pba[i] = info->pba_to_lba[i] = UNDEF; + + /* + * Define lba-pba translation table + */ + + ptr = buffer_end; + for (i = 0; i < numblocks; i++) { + ptr += (1 << CONTROL_SHIFT); + if (ptr >= buffer_end) { + unsigned long address; + + address = i << (info->pageshift + info->blockshift); + result = sddr09_read_control( + us, address>>1, + min(alloc_blocks, numblocks - i), + buffer, 0); + if (result) { + result = -1; + goto done; + } + ptr = buffer; + } + + if (i == 0 || i == 1) { + info->pba_to_lba[i] = UNUSABLE; + continue; + } + + /* special PBAs have control field 0^16 */ + for (j = 0; j < 16; j++) + if (ptr[j] != 0) + goto nonz; + info->pba_to_lba[i] = UNUSABLE; + printk(KERN_WARNING "sddr09: PBA %d has no logical mapping\n", + i); + continue; + + nonz: + /* unwritten PBAs have control field FF^16 */ + for (j = 0; j < 16; j++) + if (ptr[j] != 0xff) + goto nonff; + continue; + + nonff: + /* normal PBAs start with six FFs */ + if (j < 6) { + printk(KERN_WARNING + "sddr09: PBA %d has no logical mapping: " + "reserved area = %02X%02X%02X%02X " + "data status %02X block status %02X\n", + i, ptr[0], ptr[1], ptr[2], ptr[3], + ptr[4], ptr[5]); + info->pba_to_lba[i] = UNUSABLE; + continue; + } + + if ((ptr[6] >> 4) != 0x01) { + printk(KERN_WARNING + "sddr09: PBA %d has invalid address field " + "%02X%02X/%02X%02X\n", + i, ptr[6], ptr[7], ptr[11], ptr[12]); + info->pba_to_lba[i] = UNUSABLE; + continue; + } + + /* check even parity */ + if (parity[ptr[6] ^ ptr[7]]) { + printk(KERN_WARNING + "sddr09: Bad parity in LBA for block %d" + " (%02X %02X)\n", i, ptr[6], ptr[7]); + info->pba_to_lba[i] = UNUSABLE; + continue; + } + + lba = short_pack(ptr[7], ptr[6]); + lba = (lba & 0x07FF) >> 1; + + /* + * Every 1024 physical blocks ("zone"), the LBA numbers + * go back to zero, but are within a higher block of LBA's. + * Also, there is a maximum of 1000 LBA's per zone. + * In other words, in PBA 1024-2047 you will find LBA 0-999 + * which are really LBA 1000-1999. This allows for 24 bad + * or special physical blocks per zone. + */ + + if (lba >= 1000) { + printk(KERN_WARNING + "sddr09: Bad low LBA %d for block %d\n", + lba, i); + goto possibly_erase; + } + + lba += 1000*(i/0x400); + + if (info->lba_to_pba[lba] != UNDEF) { + printk(KERN_WARNING + "sddr09: LBA %d seen for PBA %d and %d\n", + lba, info->lba_to_pba[lba], i); + goto possibly_erase; + } + + info->pba_to_lba[i] = lba; + info->lba_to_pba[lba] = i; + continue; + + possibly_erase: + if (erase_bad_lba_entries) { + unsigned long address; + + address = (i << (info->pageshift + info->blockshift)); + sddr09_erase(us, address>>1); + info->pba_to_lba[i] = UNDEF; + } else + info->pba_to_lba[i] = UNUSABLE; + } + + /* + * Approximate capacity. This is not entirely correct yet, + * since a zone with less than 1000 usable pages leads to + * missing LBAs. Especially if it is the last zone, some + * LBAs can be past capacity. + */ + lbact = 0; + for (i = 0; i < numblocks; i += 1024) { + int ct = 0; + + for (j = 0; j < 1024 && i+j < numblocks; j++) { + if (info->pba_to_lba[i+j] != UNUSABLE) { + if (ct >= 1000) + info->pba_to_lba[i+j] = SPARE; + else + ct++; + } + } + lbact += ct; + } + info->lbact = lbact; + usb_stor_dbg(us, "Found %d LBA's\n", lbact); + result = 0; + + done: + if (result != 0) { + kfree(info->lba_to_pba); + kfree(info->pba_to_lba); + info->lba_to_pba = NULL; + info->pba_to_lba = NULL; + } + kfree(buffer); + return result; +} + +static void +sddr09_card_info_destructor(void *extra) { + struct sddr09_card_info *info = (struct sddr09_card_info *)extra; + + if (!info) + return; + + kfree(info->lba_to_pba); + kfree(info->pba_to_lba); +} + +static int +sddr09_common_init(struct us_data *us) { + int result; + + /* set the configuration -- STALL is an acceptable response here */ + if (us->pusb_dev->actconfig->desc.bConfigurationValue != 1) { + usb_stor_dbg(us, "active config #%d != 1 ??\n", + us->pusb_dev->actconfig->desc.bConfigurationValue); + return -EINVAL; + } + + result = usb_reset_configuration(us->pusb_dev); + usb_stor_dbg(us, "Result of usb_reset_configuration is %d\n", result); + if (result == -EPIPE) { + usb_stor_dbg(us, "-- stall on control interface\n"); + } else if (result != 0) { + /* it's not a stall, but another error -- time to bail */ + usb_stor_dbg(us, "-- Unknown error. Rejecting device\n"); + return -EINVAL; + } + + us->extra = kzalloc(sizeof(struct sddr09_card_info), GFP_NOIO); + if (!us->extra) + return -ENOMEM; + us->extra_destructor = sddr09_card_info_destructor; + + nand_init_ecc(); + return 0; +} + + +/* + * This is needed at a very early stage. If this is not listed in the + * unusual devices list but called from here then LUN 0 of the combo reader + * is not recognized. But I do not know what precisely these calls do. + */ +static int +usb_stor_sddr09_dpcm_init(struct us_data *us) { + int result; + unsigned char *data = us->iobuf; + + result = sddr09_common_init(us); + if (result) + return result; + + result = sddr09_send_command(us, 0x01, USB_DIR_IN, data, 2); + if (result) { + usb_stor_dbg(us, "send_command fails\n"); + return result; + } + + usb_stor_dbg(us, "%02X %02X\n", data[0], data[1]); + // get 07 02 + + result = sddr09_send_command(us, 0x08, USB_DIR_IN, data, 2); + if (result) { + usb_stor_dbg(us, "2nd send_command fails\n"); + return result; + } + + usb_stor_dbg(us, "%02X %02X\n", data[0], data[1]); + // get 07 00 + + result = sddr09_request_sense(us, data, 18); + if (result == 0 && data[2] != 0) { + int j; + for (j=0; j<18; j++) + printk(" %02X", data[j]); + printk("\n"); + // get 70 00 00 00 00 00 00 * 00 00 00 00 00 00 + // 70: current command + // sense key 0, sense code 0, extd sense code 0 + // additional transfer length * = sizeof(data) - 7 + // Or: 70 00 06 00 00 00 00 0b 00 00 00 00 28 00 00 00 00 00 + // sense key 06, sense code 28: unit attention, + // not ready to ready transition + } + + // test unit ready + + return 0; /* not result */ +} + +/* + * Transport for the Microtech DPCM-USB + */ +static int dpcm_transport(struct scsi_cmnd *srb, struct us_data *us) +{ + int ret; + + usb_stor_dbg(us, "LUN=%d\n", (u8)srb->device->lun); + + switch (srb->device->lun) { + case 0: + + /* + * LUN 0 corresponds to the CompactFlash card reader. + */ + ret = usb_stor_CB_transport(srb, us); + break; + + case 1: + + /* + * LUN 1 corresponds to the SmartMedia card reader. + */ + + /* + * Set the LUN to 0 (just in case). + */ + srb->device->lun = 0; + ret = sddr09_transport(srb, us); + srb->device->lun = 1; + break; + + default: + usb_stor_dbg(us, "Invalid LUN %d\n", (u8)srb->device->lun); + ret = USB_STOR_TRANSPORT_ERROR; + break; + } + return ret; +} + + +/* + * Transport for the Sandisk SDDR-09 + */ +static int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us) +{ + static unsigned char sensekey = 0, sensecode = 0; + static unsigned char havefakesense = 0; + int result, i; + unsigned char *ptr = us->iobuf; + unsigned long capacity; + unsigned int page, pages; + + struct sddr09_card_info *info; + + static unsigned char inquiry_response[8] = { + 0x00, 0x80, 0x00, 0x02, 0x1F, 0x00, 0x00, 0x00 + }; + + /* note: no block descriptor support */ + static unsigned char mode_page_01[19] = { + 0x00, 0x0F, 0x00, 0x0, 0x0, 0x0, 0x00, + 0x01, 0x0A, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 + }; + + info = (struct sddr09_card_info *)us->extra; + + if (srb->cmnd[0] == REQUEST_SENSE && havefakesense) { + /* for a faked command, we have to follow with a faked sense */ + memset(ptr, 0, 18); + ptr[0] = 0x70; + ptr[2] = sensekey; + ptr[7] = 11; + ptr[12] = sensecode; + usb_stor_set_xfer_buf(ptr, 18, srb); + sensekey = sensecode = havefakesense = 0; + return USB_STOR_TRANSPORT_GOOD; + } + + havefakesense = 1; + + /* Dummy up a response for INQUIRY since SDDR09 doesn't + respond to INQUIRY commands */ + + if (srb->cmnd[0] == INQUIRY) { + memcpy(ptr, inquiry_response, 8); + fill_inquiry_response(us, ptr, 36); + return USB_STOR_TRANSPORT_GOOD; + } + + if (srb->cmnd[0] == READ_CAPACITY) { + struct nand_flash_dev *cardinfo; + + sddr09_get_wp(us, info); /* read WP bit */ + + cardinfo = sddr09_get_cardinfo(us, info->flags); + if (!cardinfo) { + /* probably no media */ + init_error: + sensekey = 0x02; /* not ready */ + sensecode = 0x3a; /* medium not present */ + return USB_STOR_TRANSPORT_FAILED; + } + + info->capacity = (1 << cardinfo->chipshift); + info->pageshift = cardinfo->pageshift; + info->pagesize = (1 << info->pageshift); + info->blockshift = cardinfo->blockshift; + info->blocksize = (1 << info->blockshift); + info->blockmask = info->blocksize - 1; + + // map initialization, must follow get_cardinfo() + if (sddr09_read_map(us)) { + /* probably out of memory */ + goto init_error; + } + + // Report capacity + + capacity = (info->lbact << info->blockshift) - 1; + + ((__be32 *) ptr)[0] = cpu_to_be32(capacity); + + // Report page size + + ((__be32 *) ptr)[1] = cpu_to_be32(info->pagesize); + usb_stor_set_xfer_buf(ptr, 8, srb); + + return USB_STOR_TRANSPORT_GOOD; + } + + if (srb->cmnd[0] == MODE_SENSE_10) { + int modepage = (srb->cmnd[2] & 0x3F); + + /* They ask for the Read/Write error recovery page, + or for all pages. */ + /* %% We should check DBD %% */ + if (modepage == 0x01 || modepage == 0x3F) { + usb_stor_dbg(us, "Dummy up request for mode page 0x%x\n", + modepage); + + memcpy(ptr, mode_page_01, sizeof(mode_page_01)); + ((__be16*)ptr)[0] = cpu_to_be16(sizeof(mode_page_01) - 2); + ptr[3] = (info->flags & SDDR09_WP) ? 0x80 : 0; + usb_stor_set_xfer_buf(ptr, sizeof(mode_page_01), srb); + return USB_STOR_TRANSPORT_GOOD; + } + + sensekey = 0x05; /* illegal request */ + sensecode = 0x24; /* invalid field in CDB */ + return USB_STOR_TRANSPORT_FAILED; + } + + if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) + return USB_STOR_TRANSPORT_GOOD; + + havefakesense = 0; + + if (srb->cmnd[0] == READ_10) { + + page = short_pack(srb->cmnd[3], srb->cmnd[2]); + page <<= 16; + page |= short_pack(srb->cmnd[5], srb->cmnd[4]); + pages = short_pack(srb->cmnd[8], srb->cmnd[7]); + + usb_stor_dbg(us, "READ_10: read page %d pagect %d\n", + page, pages); + + result = sddr09_read_data(us, page, pages); + return (result == 0 ? USB_STOR_TRANSPORT_GOOD : + USB_STOR_TRANSPORT_ERROR); + } + + if (srb->cmnd[0] == WRITE_10) { + + page = short_pack(srb->cmnd[3], srb->cmnd[2]); + page <<= 16; + page |= short_pack(srb->cmnd[5], srb->cmnd[4]); + pages = short_pack(srb->cmnd[8], srb->cmnd[7]); + + usb_stor_dbg(us, "WRITE_10: write page %d pagect %d\n", + page, pages); + + result = sddr09_write_data(us, page, pages); + return (result == 0 ? USB_STOR_TRANSPORT_GOOD : + USB_STOR_TRANSPORT_ERROR); + } + + /* catch-all for all other commands, except + * pass TEST_UNIT_READY and REQUEST_SENSE through + */ + if (srb->cmnd[0] != TEST_UNIT_READY && + srb->cmnd[0] != REQUEST_SENSE) { + sensekey = 0x05; /* illegal request */ + sensecode = 0x20; /* invalid command */ + havefakesense = 1; + return USB_STOR_TRANSPORT_FAILED; + } + + for (; srb->cmd_len<12; srb->cmd_len++) + srb->cmnd[srb->cmd_len] = 0; + + srb->cmnd[1] = LUNBITS; + + ptr[0] = 0; + for (i=0; i<12; i++) + sprintf(ptr+strlen(ptr), "%02X ", srb->cmnd[i]); + + usb_stor_dbg(us, "Send control for command %s\n", ptr); + + result = sddr09_send_scsi_command(us, srb->cmnd, 12); + if (result) { + usb_stor_dbg(us, "sddr09_send_scsi_command returns %d\n", + result); + return USB_STOR_TRANSPORT_ERROR; + } + + if (scsi_bufflen(srb) == 0) + return USB_STOR_TRANSPORT_GOOD; + + if (srb->sc_data_direction == DMA_TO_DEVICE || + srb->sc_data_direction == DMA_FROM_DEVICE) { + unsigned int pipe = (srb->sc_data_direction == DMA_TO_DEVICE) + ? us->send_bulk_pipe : us->recv_bulk_pipe; + + usb_stor_dbg(us, "%s %d bytes\n", + (srb->sc_data_direction == DMA_TO_DEVICE) ? + "sending" : "receiving", + scsi_bufflen(srb)); + + result = usb_stor_bulk_srb(us, pipe, srb); + + return (result == USB_STOR_XFER_GOOD ? + USB_STOR_TRANSPORT_GOOD : USB_STOR_TRANSPORT_ERROR); + } + + return USB_STOR_TRANSPORT_GOOD; +} + +/* + * Initialization routine for the sddr09 subdriver + */ +static int +usb_stor_sddr09_init(struct us_data *us) { + return sddr09_common_init(us); +} + +static int sddr09_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct us_data *us; + int result; + + result = usb_stor_probe1(&us, intf, id, + (id - sddr09_usb_ids) + sddr09_unusual_dev_list); + if (result) + return result; + + if (us->protocol == USB_PR_DPCM_USB) { + us->transport_name = "Control/Bulk-EUSB/SDDR09"; + us->transport = dpcm_transport; + us->transport_reset = usb_stor_CB_reset; + us->max_lun = 1; + } else { + us->transport_name = "EUSB/SDDR09"; + us->transport = sddr09_transport; + us->transport_reset = usb_stor_CB_reset; + us->max_lun = 0; + } + + result = usb_stor_probe2(us); + return result; +} + +static struct usb_driver sddr09_driver = { + .name = "ums-sddr09", + .probe = sddr09_probe, + .disconnect = usb_stor_disconnect, + .suspend = usb_stor_suspend, + .resume = usb_stor_resume, + .reset_resume = usb_stor_reset_resume, + .pre_reset = usb_stor_pre_reset, + .post_reset = usb_stor_post_reset, + .id_table = sddr09_usb_ids, + .soft_unbind = 1, + .no_dynamic_id = 1, +}; + +module_usb_driver(sddr09_driver); diff --git a/kernel/drivers/usb/storage/sddr55.c b/kernel/drivers/usb/storage/sddr55.c new file mode 100644 index 000000000..aacedef96 --- /dev/null +++ b/kernel/drivers/usb/storage/sddr55.c @@ -0,0 +1,1006 @@ +/* Driver for SanDisk SDDR-55 SmartMedia reader + * + * SDDR55 driver v0.1: + * + * First release + * + * Current development and maintenance by: + * (c) 2002 Simon Munton + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/jiffies.h> +#include <linux/errno.h> +#include <linux/module.h> +#include <linux/slab.h> + +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> + +#include "usb.h" +#include "transport.h" +#include "protocol.h" +#include "debug.h" + +MODULE_DESCRIPTION("Driver for SanDisk SDDR-55 SmartMedia reader"); +MODULE_AUTHOR("Simon Munton"); +MODULE_LICENSE("GPL"); + +/* + * The table of devices + */ +#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ + vendorName, productName, useProtocol, useTransport, \ + initFunction, flags) \ +{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ + .driver_info = (flags) } + +static struct usb_device_id sddr55_usb_ids[] = { +# include "unusual_sddr55.h" + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, sddr55_usb_ids); + +#undef UNUSUAL_DEV + +/* + * The flags table + */ +#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \ + vendor_name, product_name, use_protocol, use_transport, \ + init_function, Flags) \ +{ \ + .vendorName = vendor_name, \ + .productName = product_name, \ + .useProtocol = use_protocol, \ + .useTransport = use_transport, \ + .initFunction = init_function, \ +} + +static struct us_unusual_dev sddr55_unusual_dev_list[] = { +# include "unusual_sddr55.h" + { } /* Terminating entry */ +}; + +#undef UNUSUAL_DEV + + +#define short_pack(lsb,msb) ( ((u16)(lsb)) | ( ((u16)(msb))<<8 ) ) +#define LSB_of(s) ((s)&0xFF) +#define MSB_of(s) ((s)>>8) +#define PAGESIZE 512 + +#define set_sense_info(sk, asc, ascq) \ + do { \ + info->sense_data[2] = sk; \ + info->sense_data[12] = asc; \ + info->sense_data[13] = ascq; \ + } while (0) + + +struct sddr55_card_info { + unsigned long capacity; /* Size of card in bytes */ + int max_log_blks; /* maximum number of logical blocks */ + int pageshift; /* log2 of pagesize */ + int smallpageshift; /* 1 if pagesize == 256 */ + int blocksize; /* Size of block in pages */ + int blockshift; /* log2 of blocksize */ + int blockmask; /* 2^blockshift - 1 */ + int read_only; /* non zero if card is write protected */ + int force_read_only; /* non zero if we find a map error*/ + int *lba_to_pba; /* logical to physical map */ + int *pba_to_lba; /* physical to logical map */ + int fatal_error; /* set if we detect something nasty */ + unsigned long last_access; /* number of jiffies since we last talked to device */ + unsigned char sense_data[18]; +}; + + +#define NOT_ALLOCATED 0xffffffff +#define BAD_BLOCK 0xffff +#define CIS_BLOCK 0x400 +#define UNUSED_BLOCK 0x3ff + +static int +sddr55_bulk_transport(struct us_data *us, int direction, + unsigned char *data, unsigned int len) { + struct sddr55_card_info *info = (struct sddr55_card_info *)us->extra; + unsigned int pipe = (direction == DMA_FROM_DEVICE) ? + us->recv_bulk_pipe : us->send_bulk_pipe; + + if (!len) + return USB_STOR_XFER_GOOD; + info->last_access = jiffies; + return usb_stor_bulk_transfer_buf(us, pipe, data, len, NULL); +} + +/* check if card inserted, if there is, update read_only status + * return non zero if no card + */ + +static int sddr55_status(struct us_data *us) +{ + int result; + unsigned char *command = us->iobuf; + unsigned char *status = us->iobuf; + struct sddr55_card_info *info = (struct sddr55_card_info *)us->extra; + + /* send command */ + memset(command, 0, 8); + command[5] = 0xB0; + command[7] = 0x80; + result = sddr55_bulk_transport(us, + DMA_TO_DEVICE, command, 8); + + usb_stor_dbg(us, "Result for send_command in status %d\n", result); + + if (result != USB_STOR_XFER_GOOD) { + set_sense_info (4, 0, 0); /* hardware error */ + return USB_STOR_TRANSPORT_ERROR; + } + + result = sddr55_bulk_transport(us, + DMA_FROM_DEVICE, status, 4); + + /* expect to get short transfer if no card fitted */ + if (result == USB_STOR_XFER_SHORT || result == USB_STOR_XFER_STALLED) { + /* had a short transfer, no card inserted, free map memory */ + kfree(info->lba_to_pba); + kfree(info->pba_to_lba); + info->lba_to_pba = NULL; + info->pba_to_lba = NULL; + + info->fatal_error = 0; + info->force_read_only = 0; + + set_sense_info (2, 0x3a, 0); /* not ready, medium not present */ + return USB_STOR_TRANSPORT_FAILED; + } + + if (result != USB_STOR_XFER_GOOD) { + set_sense_info (4, 0, 0); /* hardware error */ + return USB_STOR_TRANSPORT_FAILED; + } + + /* check write protect status */ + info->read_only = (status[0] & 0x20); + + /* now read status */ + result = sddr55_bulk_transport(us, + DMA_FROM_DEVICE, status, 2); + + if (result != USB_STOR_XFER_GOOD) { + set_sense_info (4, 0, 0); /* hardware error */ + } + + return (result == USB_STOR_XFER_GOOD ? + USB_STOR_TRANSPORT_GOOD : USB_STOR_TRANSPORT_FAILED); +} + + +static int sddr55_read_data(struct us_data *us, + unsigned int lba, + unsigned int page, + unsigned short sectors) { + + int result = USB_STOR_TRANSPORT_GOOD; + unsigned char *command = us->iobuf; + unsigned char *status = us->iobuf; + struct sddr55_card_info *info = (struct sddr55_card_info *)us->extra; + unsigned char *buffer; + + unsigned int pba; + unsigned long address; + + unsigned short pages; + unsigned int len, offset; + struct scatterlist *sg; + + // Since we only read in one block at a time, we have to create + // a bounce buffer and move the data a piece at a time between the + // bounce buffer and the actual transfer buffer. + + len = min((unsigned int) sectors, (unsigned int) info->blocksize >> + info->smallpageshift) * PAGESIZE; + buffer = kmalloc(len, GFP_NOIO); + if (buffer == NULL) + return USB_STOR_TRANSPORT_ERROR; /* out of memory */ + offset = 0; + sg = NULL; + + while (sectors>0) { + + /* have we got to end? */ + if (lba >= info->max_log_blks) + break; + + pba = info->lba_to_pba[lba]; + + // Read as many sectors as possible in this block + + pages = min((unsigned int) sectors << info->smallpageshift, + info->blocksize - page); + len = pages << info->pageshift; + + usb_stor_dbg(us, "Read %02X pages, from PBA %04X (LBA %04X) page %02X\n", + pages, pba, lba, page); + + if (pba == NOT_ALLOCATED) { + /* no pba for this lba, fill with zeroes */ + memset (buffer, 0, len); + } else { + + address = (pba << info->blockshift) + page; + + command[0] = 0; + command[1] = LSB_of(address>>16); + command[2] = LSB_of(address>>8); + command[3] = LSB_of(address); + + command[4] = 0; + command[5] = 0xB0; + command[6] = LSB_of(pages << (1 - info->smallpageshift)); + command[7] = 0x85; + + /* send command */ + result = sddr55_bulk_transport(us, + DMA_TO_DEVICE, command, 8); + + usb_stor_dbg(us, "Result for send_command in read_data %d\n", + result); + + if (result != USB_STOR_XFER_GOOD) { + result = USB_STOR_TRANSPORT_ERROR; + goto leave; + } + + /* read data */ + result = sddr55_bulk_transport(us, + DMA_FROM_DEVICE, buffer, len); + + if (result != USB_STOR_XFER_GOOD) { + result = USB_STOR_TRANSPORT_ERROR; + goto leave; + } + + /* now read status */ + result = sddr55_bulk_transport(us, + DMA_FROM_DEVICE, status, 2); + + if (result != USB_STOR_XFER_GOOD) { + result = USB_STOR_TRANSPORT_ERROR; + goto leave; + } + + /* check status for error */ + if (status[0] == 0xff && status[1] == 0x4) { + set_sense_info (3, 0x11, 0); + result = USB_STOR_TRANSPORT_FAILED; + goto leave; + } + } + + // Store the data in the transfer buffer + usb_stor_access_xfer_buf(buffer, len, us->srb, + &sg, &offset, TO_XFER_BUF); + + page = 0; + lba++; + sectors -= pages >> info->smallpageshift; + } + + result = USB_STOR_TRANSPORT_GOOD; + +leave: + kfree(buffer); + + return result; +} + +static int sddr55_write_data(struct us_data *us, + unsigned int lba, + unsigned int page, + unsigned short sectors) { + + int result = USB_STOR_TRANSPORT_GOOD; + unsigned char *command = us->iobuf; + unsigned char *status = us->iobuf; + struct sddr55_card_info *info = (struct sddr55_card_info *)us->extra; + unsigned char *buffer; + + unsigned int pba; + unsigned int new_pba; + unsigned long address; + + unsigned short pages; + int i; + unsigned int len, offset; + struct scatterlist *sg; + + /* check if we are allowed to write */ + if (info->read_only || info->force_read_only) { + set_sense_info (7, 0x27, 0); /* read only */ + return USB_STOR_TRANSPORT_FAILED; + } + + // Since we only write one block at a time, we have to create + // a bounce buffer and move the data a piece at a time between the + // bounce buffer and the actual transfer buffer. + + len = min((unsigned int) sectors, (unsigned int) info->blocksize >> + info->smallpageshift) * PAGESIZE; + buffer = kmalloc(len, GFP_NOIO); + if (buffer == NULL) + return USB_STOR_TRANSPORT_ERROR; + offset = 0; + sg = NULL; + + while (sectors > 0) { + + /* have we got to end? */ + if (lba >= info->max_log_blks) + break; + + pba = info->lba_to_pba[lba]; + + // Write as many sectors as possible in this block + + pages = min((unsigned int) sectors << info->smallpageshift, + info->blocksize - page); + len = pages << info->pageshift; + + // Get the data from the transfer buffer + usb_stor_access_xfer_buf(buffer, len, us->srb, + &sg, &offset, FROM_XFER_BUF); + + usb_stor_dbg(us, "Write %02X pages, to PBA %04X (LBA %04X) page %02X\n", + pages, pba, lba, page); + + command[4] = 0; + + if (pba == NOT_ALLOCATED) { + /* no pba allocated for this lba, find a free pba to use */ + + int max_pba = (info->max_log_blks / 250 ) * 256; + int found_count = 0; + int found_pba = -1; + + /* set pba to first block in zone lba is in */ + pba = (lba / 1000) * 1024; + + usb_stor_dbg(us, "No PBA for LBA %04X\n", lba); + + if (max_pba > 1024) + max_pba = 1024; + + /* + * Scan through the map looking for an unused block + * leave 16 unused blocks at start (or as many as + * possible) since the sddr55 seems to reuse a used + * block when it shouldn't if we don't leave space. + */ + for (i = 0; i < max_pba; i++, pba++) { + if (info->pba_to_lba[pba] == UNUSED_BLOCK) { + found_pba = pba; + if (found_count++ > 16) + break; + } + } + + pba = found_pba; + + if (pba == -1) { + /* oh dear */ + usb_stor_dbg(us, "Couldn't find unallocated block\n"); + + set_sense_info (3, 0x31, 0); /* medium error */ + result = USB_STOR_TRANSPORT_FAILED; + goto leave; + } + + usb_stor_dbg(us, "Allocating PBA %04X for LBA %04X\n", + pba, lba); + + /* set writing to unallocated block flag */ + command[4] = 0x40; + } + + address = (pba << info->blockshift) + page; + + command[1] = LSB_of(address>>16); + command[2] = LSB_of(address>>8); + command[3] = LSB_of(address); + + /* set the lba into the command, modulo 1000 */ + command[0] = LSB_of(lba % 1000); + command[6] = MSB_of(lba % 1000); + + command[4] |= LSB_of(pages >> info->smallpageshift); + command[5] = 0xB0; + command[7] = 0x86; + + /* send command */ + result = sddr55_bulk_transport(us, + DMA_TO_DEVICE, command, 8); + + if (result != USB_STOR_XFER_GOOD) { + usb_stor_dbg(us, "Result for send_command in write_data %d\n", + result); + + /* set_sense_info is superfluous here? */ + set_sense_info (3, 0x3, 0);/* peripheral write error */ + result = USB_STOR_TRANSPORT_FAILED; + goto leave; + } + + /* send the data */ + result = sddr55_bulk_transport(us, + DMA_TO_DEVICE, buffer, len); + + if (result != USB_STOR_XFER_GOOD) { + usb_stor_dbg(us, "Result for send_data in write_data %d\n", + result); + + /* set_sense_info is superfluous here? */ + set_sense_info (3, 0x3, 0);/* peripheral write error */ + result = USB_STOR_TRANSPORT_FAILED; + goto leave; + } + + /* now read status */ + result = sddr55_bulk_transport(us, DMA_FROM_DEVICE, status, 6); + + if (result != USB_STOR_XFER_GOOD) { + usb_stor_dbg(us, "Result for get_status in write_data %d\n", + result); + + /* set_sense_info is superfluous here? */ + set_sense_info (3, 0x3, 0);/* peripheral write error */ + result = USB_STOR_TRANSPORT_FAILED; + goto leave; + } + + new_pba = (status[3] + (status[4] << 8) + (status[5] << 16)) + >> info->blockshift; + + /* check status for error */ + if (status[0] == 0xff && status[1] == 0x4) { + info->pba_to_lba[new_pba] = BAD_BLOCK; + + set_sense_info (3, 0x0c, 0); + result = USB_STOR_TRANSPORT_FAILED; + goto leave; + } + + usb_stor_dbg(us, "Updating maps for LBA %04X: old PBA %04X, new PBA %04X\n", + lba, pba, new_pba); + + /* update the lba<->pba maps, note new_pba might be the same as pba */ + info->lba_to_pba[lba] = new_pba; + info->pba_to_lba[pba] = UNUSED_BLOCK; + + /* check that new_pba wasn't already being used */ + if (info->pba_to_lba[new_pba] != UNUSED_BLOCK) { + printk(KERN_ERR "sddr55 error: new PBA %04X already in use for LBA %04X\n", + new_pba, info->pba_to_lba[new_pba]); + info->fatal_error = 1; + set_sense_info (3, 0x31, 0); + result = USB_STOR_TRANSPORT_FAILED; + goto leave; + } + + /* update the pba<->lba maps for new_pba */ + info->pba_to_lba[new_pba] = lba % 1000; + + page = 0; + lba++; + sectors -= pages >> info->smallpageshift; + } + result = USB_STOR_TRANSPORT_GOOD; + + leave: + kfree(buffer); + return result; +} + +static int sddr55_read_deviceID(struct us_data *us, + unsigned char *manufacturerID, + unsigned char *deviceID) { + + int result; + unsigned char *command = us->iobuf; + unsigned char *content = us->iobuf; + + memset(command, 0, 8); + command[5] = 0xB0; + command[7] = 0x84; + result = sddr55_bulk_transport(us, DMA_TO_DEVICE, command, 8); + + usb_stor_dbg(us, "Result of send_control for device ID is %d\n", + result); + + if (result != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + result = sddr55_bulk_transport(us, + DMA_FROM_DEVICE, content, 4); + + if (result != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + *manufacturerID = content[0]; + *deviceID = content[1]; + + if (content[0] != 0xff) { + result = sddr55_bulk_transport(us, + DMA_FROM_DEVICE, content, 2); + } + + return USB_STOR_TRANSPORT_GOOD; +} + + +static int sddr55_reset(struct us_data *us) +{ + return 0; +} + + +static unsigned long sddr55_get_capacity(struct us_data *us) { + + unsigned char uninitialized_var(manufacturerID); + unsigned char uninitialized_var(deviceID); + int result; + struct sddr55_card_info *info = (struct sddr55_card_info *)us->extra; + + usb_stor_dbg(us, "Reading capacity...\n"); + + result = sddr55_read_deviceID(us, + &manufacturerID, + &deviceID); + + usb_stor_dbg(us, "Result of read_deviceID is %d\n", result); + + if (result != USB_STOR_XFER_GOOD) + return 0; + + usb_stor_dbg(us, "Device ID = %02X\n", deviceID); + usb_stor_dbg(us, "Manuf ID = %02X\n", manufacturerID); + + info->pageshift = 9; + info->smallpageshift = 0; + info->blocksize = 16; + info->blockshift = 4; + info->blockmask = 15; + + switch (deviceID) { + + case 0x6e: // 1MB + case 0xe8: + case 0xec: + info->pageshift = 8; + info->smallpageshift = 1; + return 0x00100000; + + case 0xea: // 2MB + case 0x64: + info->pageshift = 8; + info->smallpageshift = 1; + case 0x5d: // 5d is a ROM card with pagesize 512. + return 0x00200000; + + case 0xe3: // 4MB + case 0xe5: + case 0x6b: + case 0xd5: + return 0x00400000; + + case 0xe6: // 8MB + case 0xd6: + return 0x00800000; + + case 0x73: // 16MB + info->blocksize = 32; + info->blockshift = 5; + info->blockmask = 31; + return 0x01000000; + + case 0x75: // 32MB + info->blocksize = 32; + info->blockshift = 5; + info->blockmask = 31; + return 0x02000000; + + case 0x76: // 64MB + info->blocksize = 32; + info->blockshift = 5; + info->blockmask = 31; + return 0x04000000; + + case 0x79: // 128MB + info->blocksize = 32; + info->blockshift = 5; + info->blockmask = 31; + return 0x08000000; + + default: // unknown + return 0; + + } +} + +static int sddr55_read_map(struct us_data *us) { + + struct sddr55_card_info *info = (struct sddr55_card_info *)(us->extra); + int numblocks; + unsigned char *buffer; + unsigned char *command = us->iobuf; + int i; + unsigned short lba; + unsigned short max_lba; + int result; + + if (!info->capacity) + return -1; + + numblocks = info->capacity >> (info->blockshift + info->pageshift); + + buffer = kmalloc( numblocks * 2, GFP_NOIO ); + + if (!buffer) + return -1; + + memset(command, 0, 8); + command[5] = 0xB0; + command[6] = numblocks * 2 / 256; + command[7] = 0x8A; + + result = sddr55_bulk_transport(us, DMA_TO_DEVICE, command, 8); + + if ( result != USB_STOR_XFER_GOOD) { + kfree (buffer); + return -1; + } + + result = sddr55_bulk_transport(us, DMA_FROM_DEVICE, buffer, numblocks * 2); + + if ( result != USB_STOR_XFER_GOOD) { + kfree (buffer); + return -1; + } + + result = sddr55_bulk_transport(us, DMA_FROM_DEVICE, command, 2); + + if ( result != USB_STOR_XFER_GOOD) { + kfree (buffer); + return -1; + } + + kfree(info->lba_to_pba); + kfree(info->pba_to_lba); + info->lba_to_pba = kmalloc(numblocks*sizeof(int), GFP_NOIO); + info->pba_to_lba = kmalloc(numblocks*sizeof(int), GFP_NOIO); + + if (info->lba_to_pba == NULL || info->pba_to_lba == NULL) { + kfree(info->lba_to_pba); + kfree(info->pba_to_lba); + info->lba_to_pba = NULL; + info->pba_to_lba = NULL; + kfree(buffer); + return -1; + } + + memset(info->lba_to_pba, 0xff, numblocks*sizeof(int)); + memset(info->pba_to_lba, 0xff, numblocks*sizeof(int)); + + /* set maximum lba */ + max_lba = info->max_log_blks; + if (max_lba > 1000) + max_lba = 1000; + + // Each block is 64 bytes of control data, so block i is located in + // scatterlist block i*64/128k = i*(2^6)*(2^-17) = i*(2^-11) + + for (i=0; i<numblocks; i++) { + int zone = i / 1024; + + lba = short_pack(buffer[i * 2], buffer[i * 2 + 1]); + + /* Every 1024 physical blocks ("zone"), the LBA numbers + * go back to zero, but are within a higher + * block of LBA's. Also, there is a maximum of + * 1000 LBA's per zone. In other words, in PBA + * 1024-2047 you will find LBA 0-999 which are + * really LBA 1000-1999. Yes, this wastes 24 + * physical blocks per zone. Go figure. + * These devices can have blocks go bad, so there + * are 24 spare blocks to use when blocks do go bad. + */ + + /* SDDR55 returns 0xffff for a bad block, and 0x400 for the + * CIS block. (Is this true for cards 8MB or less??) + * Record these in the physical to logical map + */ + + info->pba_to_lba[i] = lba; + + if (lba >= max_lba) { + continue; + } + + if (info->lba_to_pba[lba + zone * 1000] != NOT_ALLOCATED && + !info->force_read_only) { + printk(KERN_WARNING + "sddr55: map inconsistency at LBA %04X\n", + lba + zone * 1000); + info->force_read_only = 1; + } + + if (lba<0x10 || (lba>=0x3E0 && lba<0x3EF)) + usb_stor_dbg(us, "LBA %04X <-> PBA %04X\n", lba, i); + + info->lba_to_pba[lba + zone * 1000] = i; + } + + kfree(buffer); + return 0; +} + + +static void sddr55_card_info_destructor(void *extra) { + struct sddr55_card_info *info = (struct sddr55_card_info *)extra; + + if (!extra) + return; + + kfree(info->lba_to_pba); + kfree(info->pba_to_lba); +} + + +/* + * Transport for the Sandisk SDDR-55 + */ +static int sddr55_transport(struct scsi_cmnd *srb, struct us_data *us) +{ + int result; + static unsigned char inquiry_response[8] = { + 0x00, 0x80, 0x00, 0x02, 0x1F, 0x00, 0x00, 0x00 + }; + // write-protected for now, no block descriptor support + static unsigned char mode_page_01[20] = { + 0x0, 0x12, 0x00, 0x80, 0x0, 0x0, 0x0, 0x0, + 0x01, 0x0A, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 + }; + unsigned char *ptr = us->iobuf; + unsigned long capacity; + unsigned int lba; + unsigned int pba; + unsigned int page; + unsigned short pages; + struct sddr55_card_info *info; + + if (!us->extra) { + us->extra = kzalloc( + sizeof(struct sddr55_card_info), GFP_NOIO); + if (!us->extra) + return USB_STOR_TRANSPORT_ERROR; + us->extra_destructor = sddr55_card_info_destructor; + } + + info = (struct sddr55_card_info *)(us->extra); + + if (srb->cmnd[0] == REQUEST_SENSE) { + usb_stor_dbg(us, "request sense %02x/%02x/%02x\n", + info->sense_data[2], + info->sense_data[12], + info->sense_data[13]); + + memcpy (ptr, info->sense_data, sizeof info->sense_data); + ptr[0] = 0x70; + ptr[7] = 11; + usb_stor_set_xfer_buf (ptr, sizeof info->sense_data, srb); + memset (info->sense_data, 0, sizeof info->sense_data); + + return USB_STOR_TRANSPORT_GOOD; + } + + memset (info->sense_data, 0, sizeof info->sense_data); + + /* Dummy up a response for INQUIRY since SDDR55 doesn't + respond to INQUIRY commands */ + + if (srb->cmnd[0] == INQUIRY) { + memcpy(ptr, inquiry_response, 8); + fill_inquiry_response(us, ptr, 36); + return USB_STOR_TRANSPORT_GOOD; + } + + /* only check card status if the map isn't allocated, ie no card seen yet + * or if it's been over half a second since we last accessed it + */ + if (info->lba_to_pba == NULL || time_after(jiffies, info->last_access + HZ/2)) { + + /* check to see if a card is fitted */ + result = sddr55_status (us); + if (result) { + result = sddr55_status (us); + if (!result) { + set_sense_info (6, 0x28, 0); /* new media, set unit attention, not ready to ready */ + } + return USB_STOR_TRANSPORT_FAILED; + } + } + + /* if we detected a problem with the map when writing, + don't allow any more access */ + if (info->fatal_error) { + + set_sense_info (3, 0x31, 0); + return USB_STOR_TRANSPORT_FAILED; + } + + if (srb->cmnd[0] == READ_CAPACITY) { + + capacity = sddr55_get_capacity(us); + + if (!capacity) { + set_sense_info (3, 0x30, 0); /* incompatible medium */ + return USB_STOR_TRANSPORT_FAILED; + } + + info->capacity = capacity; + + /* figure out the maximum logical block number, allowing for + * the fact that only 250 out of every 256 are used */ + info->max_log_blks = ((info->capacity >> (info->pageshift + info->blockshift)) / 256) * 250; + + /* Last page in the card, adjust as we only use 250 out of + * every 256 pages */ + capacity = (capacity / 256) * 250; + + capacity /= PAGESIZE; + capacity--; + + ((__be32 *) ptr)[0] = cpu_to_be32(capacity); + ((__be32 *) ptr)[1] = cpu_to_be32(PAGESIZE); + usb_stor_set_xfer_buf(ptr, 8, srb); + + sddr55_read_map(us); + + return USB_STOR_TRANSPORT_GOOD; + } + + if (srb->cmnd[0] == MODE_SENSE_10) { + + memcpy(ptr, mode_page_01, sizeof mode_page_01); + ptr[3] = (info->read_only || info->force_read_only) ? 0x80 : 0; + usb_stor_set_xfer_buf(ptr, sizeof(mode_page_01), srb); + + if ( (srb->cmnd[2] & 0x3F) == 0x01 ) { + usb_stor_dbg(us, "Dummy up request for mode page 1\n"); + return USB_STOR_TRANSPORT_GOOD; + + } else if ( (srb->cmnd[2] & 0x3F) == 0x3F ) { + usb_stor_dbg(us, "Dummy up request for all mode pages\n"); + return USB_STOR_TRANSPORT_GOOD; + } + + set_sense_info (5, 0x24, 0); /* invalid field in command */ + return USB_STOR_TRANSPORT_FAILED; + } + + if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) { + + usb_stor_dbg(us, "%s medium removal. Not that I can do anything about it...\n", + (srb->cmnd[4]&0x03) ? "Prevent" : "Allow"); + + return USB_STOR_TRANSPORT_GOOD; + + } + + if (srb->cmnd[0] == READ_10 || srb->cmnd[0] == WRITE_10) { + + page = short_pack(srb->cmnd[3], srb->cmnd[2]); + page <<= 16; + page |= short_pack(srb->cmnd[5], srb->cmnd[4]); + pages = short_pack(srb->cmnd[8], srb->cmnd[7]); + + page <<= info->smallpageshift; + + // convert page to block and page-within-block + + lba = page >> info->blockshift; + page = page & info->blockmask; + + // locate physical block corresponding to logical block + + if (lba >= info->max_log_blks) { + + usb_stor_dbg(us, "Error: Requested LBA %04X exceeds maximum block %04X\n", + lba, info->max_log_blks - 1); + + set_sense_info (5, 0x24, 0); /* invalid field in command */ + + return USB_STOR_TRANSPORT_FAILED; + } + + pba = info->lba_to_pba[lba]; + + if (srb->cmnd[0] == WRITE_10) { + usb_stor_dbg(us, "WRITE_10: write block %04X (LBA %04X) page %01X pages %d\n", + pba, lba, page, pages); + + return sddr55_write_data(us, lba, page, pages); + } else { + usb_stor_dbg(us, "READ_10: read block %04X (LBA %04X) page %01X pages %d\n", + pba, lba, page, pages); + + return sddr55_read_data(us, lba, page, pages); + } + } + + + if (srb->cmnd[0] == TEST_UNIT_READY) { + return USB_STOR_TRANSPORT_GOOD; + } + + if (srb->cmnd[0] == START_STOP) { + return USB_STOR_TRANSPORT_GOOD; + } + + set_sense_info (5, 0x20, 0); /* illegal command */ + + return USB_STOR_TRANSPORT_FAILED; // FIXME: sense buffer? +} + + +static int sddr55_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct us_data *us; + int result; + + result = usb_stor_probe1(&us, intf, id, + (id - sddr55_usb_ids) + sddr55_unusual_dev_list); + if (result) + return result; + + us->transport_name = "SDDR55"; + us->transport = sddr55_transport; + us->transport_reset = sddr55_reset; + us->max_lun = 0; + + result = usb_stor_probe2(us); + return result; +} + +static struct usb_driver sddr55_driver = { + .name = "ums-sddr55", + .probe = sddr55_probe, + .disconnect = usb_stor_disconnect, + .suspend = usb_stor_suspend, + .resume = usb_stor_resume, + .reset_resume = usb_stor_reset_resume, + .pre_reset = usb_stor_pre_reset, + .post_reset = usb_stor_post_reset, + .id_table = sddr55_usb_ids, + .soft_unbind = 1, + .no_dynamic_id = 1, +}; + +module_usb_driver(sddr55_driver); diff --git a/kernel/drivers/usb/storage/shuttle_usbat.c b/kernel/drivers/usb/storage/shuttle_usbat.c new file mode 100644 index 000000000..008d805c3 --- /dev/null +++ b/kernel/drivers/usb/storage/shuttle_usbat.c @@ -0,0 +1,1874 @@ +/* Driver for SCM Microsystems (a.k.a. Shuttle) USB-ATAPI cable + * + * Current development and maintenance by: + * (c) 2000, 2001 Robert Baruch (autophile@starband.net) + * (c) 2004, 2005 Daniel Drake <dsd@gentoo.org> + * + * Developed with the assistance of: + * (c) 2002 Alan Stern <stern@rowland.org> + * + * Flash support based on earlier work by: + * (c) 2002 Thomas Kreiling <usbdev@sm04.de> + * + * Many originally ATAPI devices were slightly modified to meet the USB + * market by using some kind of translation from ATAPI to USB on the host, + * and the peripheral would translate from USB back to ATAPI. + * + * SCM Microsystems (www.scmmicro.com) makes a device, sold to OEM's only, + * which does the USB-to-ATAPI conversion. By obtaining the data sheet on + * their device under nondisclosure agreement, I have been able to write + * this driver for Linux. + * + * The chip used in the device can also be used for EPP and ISA translation + * as well. This driver is only guaranteed to work with the ATAPI + * translation. + * + * See the Kconfig help text for a list of devices known to be supported by + * this driver. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/errno.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/cdrom.h> + +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> + +#include "usb.h" +#include "transport.h" +#include "protocol.h" +#include "debug.h" + +MODULE_DESCRIPTION("Driver for SCM Microsystems (a.k.a. Shuttle) USB-ATAPI cable"); +MODULE_AUTHOR("Daniel Drake <dsd@gentoo.org>, Robert Baruch <autophile@starband.net>"); +MODULE_LICENSE("GPL"); + +/* Supported device types */ +#define USBAT_DEV_HP8200 0x01 +#define USBAT_DEV_FLASH 0x02 + +#define USBAT_EPP_PORT 0x10 +#define USBAT_EPP_REGISTER 0x30 +#define USBAT_ATA 0x40 +#define USBAT_ISA 0x50 + +/* Commands (need to be logically OR'd with an access type */ +#define USBAT_CMD_READ_REG 0x00 +#define USBAT_CMD_WRITE_REG 0x01 +#define USBAT_CMD_READ_BLOCK 0x02 +#define USBAT_CMD_WRITE_BLOCK 0x03 +#define USBAT_CMD_COND_READ_BLOCK 0x04 +#define USBAT_CMD_COND_WRITE_BLOCK 0x05 +#define USBAT_CMD_WRITE_REGS 0x07 + +/* Commands (these don't need an access type) */ +#define USBAT_CMD_EXEC_CMD 0x80 +#define USBAT_CMD_SET_FEAT 0x81 +#define USBAT_CMD_UIO 0x82 + +/* Methods of accessing UIO register */ +#define USBAT_UIO_READ 1 +#define USBAT_UIO_WRITE 0 + +/* Qualifier bits */ +#define USBAT_QUAL_FCQ 0x20 /* full compare */ +#define USBAT_QUAL_ALQ 0x10 /* auto load subcount */ + +/* USBAT Flash Media status types */ +#define USBAT_FLASH_MEDIA_NONE 0 +#define USBAT_FLASH_MEDIA_CF 1 + +/* USBAT Flash Media change types */ +#define USBAT_FLASH_MEDIA_SAME 0 +#define USBAT_FLASH_MEDIA_CHANGED 1 + +/* USBAT ATA registers */ +#define USBAT_ATA_DATA 0x10 /* read/write data (R/W) */ +#define USBAT_ATA_FEATURES 0x11 /* set features (W) */ +#define USBAT_ATA_ERROR 0x11 /* error (R) */ +#define USBAT_ATA_SECCNT 0x12 /* sector count (R/W) */ +#define USBAT_ATA_SECNUM 0x13 /* sector number (R/W) */ +#define USBAT_ATA_LBA_ME 0x14 /* cylinder low (R/W) */ +#define USBAT_ATA_LBA_HI 0x15 /* cylinder high (R/W) */ +#define USBAT_ATA_DEVICE 0x16 /* head/device selection (R/W) */ +#define USBAT_ATA_STATUS 0x17 /* device status (R) */ +#define USBAT_ATA_CMD 0x17 /* device command (W) */ +#define USBAT_ATA_ALTSTATUS 0x0E /* status (no clear IRQ) (R) */ + +/* USBAT User I/O Data registers */ +#define USBAT_UIO_EPAD 0x80 /* Enable Peripheral Control Signals */ +#define USBAT_UIO_CDT 0x40 /* Card Detect (Read Only) */ + /* CDT = ACKD & !UI1 & !UI0 */ +#define USBAT_UIO_1 0x20 /* I/O 1 */ +#define USBAT_UIO_0 0x10 /* I/O 0 */ +#define USBAT_UIO_EPP_ATA 0x08 /* 1=EPP mode, 0=ATA mode */ +#define USBAT_UIO_UI1 0x04 /* Input 1 */ +#define USBAT_UIO_UI0 0x02 /* Input 0 */ +#define USBAT_UIO_INTR_ACK 0x01 /* Interrupt (ATA/ISA)/Acknowledge (EPP) */ + +/* USBAT User I/O Enable registers */ +#define USBAT_UIO_DRVRST 0x80 /* Reset Peripheral */ +#define USBAT_UIO_ACKD 0x40 /* Enable Card Detect */ +#define USBAT_UIO_OE1 0x20 /* I/O 1 set=output/clr=input */ + /* If ACKD=1, set OE1 to 1 also. */ +#define USBAT_UIO_OE0 0x10 /* I/O 0 set=output/clr=input */ +#define USBAT_UIO_ADPRST 0x01 /* Reset SCM chip */ + +/* USBAT Features */ +#define USBAT_FEAT_ETEN 0x80 /* External trigger enable */ +#define USBAT_FEAT_U1 0x08 +#define USBAT_FEAT_U0 0x04 +#define USBAT_FEAT_ET1 0x02 +#define USBAT_FEAT_ET2 0x01 + +struct usbat_info { + int devicetype; + + /* Used for Flash readers only */ + unsigned long sectors; /* total sector count */ + unsigned long ssize; /* sector size in bytes */ + + unsigned char sense_key; + unsigned long sense_asc; /* additional sense code */ + unsigned long sense_ascq; /* additional sense code qualifier */ +}; + +#define short_pack(LSB,MSB) ( ((u16)(LSB)) | ( ((u16)(MSB))<<8 ) ) +#define LSB_of(s) ((s)&0xFF) +#define MSB_of(s) ((s)>>8) + +static int transferred = 0; + +static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us); +static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us); + +static int init_usbat_cd(struct us_data *us); +static int init_usbat_flash(struct us_data *us); + + +/* + * The table of devices + */ +#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ + vendorName, productName, useProtocol, useTransport, \ + initFunction, flags) \ +{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ + .driver_info = (flags) } + +static struct usb_device_id usbat_usb_ids[] = { +# include "unusual_usbat.h" + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, usbat_usb_ids); + +#undef UNUSUAL_DEV + +/* + * The flags table + */ +#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \ + vendor_name, product_name, use_protocol, use_transport, \ + init_function, Flags) \ +{ \ + .vendorName = vendor_name, \ + .productName = product_name, \ + .useProtocol = use_protocol, \ + .useTransport = use_transport, \ + .initFunction = init_function, \ +} + +static struct us_unusual_dev usbat_unusual_dev_list[] = { +# include "unusual_usbat.h" + { } /* Terminating entry */ +}; + +#undef UNUSUAL_DEV + +/* + * Convenience function to produce an ATA read/write sectors command + * Use cmd=0x20 for read, cmd=0x30 for write + */ +static void usbat_pack_ata_sector_cmd(unsigned char *buf, + unsigned char thistime, + u32 sector, unsigned char cmd) +{ + buf[0] = 0; + buf[1] = thistime; + buf[2] = sector & 0xFF; + buf[3] = (sector >> 8) & 0xFF; + buf[4] = (sector >> 16) & 0xFF; + buf[5] = 0xE0 | ((sector >> 24) & 0x0F); + buf[6] = cmd; +} + +/* + * Convenience function to get the device type (flash or hp8200) + */ +static int usbat_get_device_type(struct us_data *us) +{ + return ((struct usbat_info*)us->extra)->devicetype; +} + +/* + * Read a register from the device + */ +static int usbat_read(struct us_data *us, + unsigned char access, + unsigned char reg, + unsigned char *content) +{ + return usb_stor_ctrl_transfer(us, + us->recv_ctrl_pipe, + access | USBAT_CMD_READ_REG, + 0xC0, + (u16)reg, + 0, + content, + 1); +} + +/* + * Write to a register on the device + */ +static int usbat_write(struct us_data *us, + unsigned char access, + unsigned char reg, + unsigned char content) +{ + return usb_stor_ctrl_transfer(us, + us->send_ctrl_pipe, + access | USBAT_CMD_WRITE_REG, + 0x40, + short_pack(reg, content), + 0, + NULL, + 0); +} + +/* + * Convenience function to perform a bulk read + */ +static int usbat_bulk_read(struct us_data *us, + void* buf, + unsigned int len, + int use_sg) +{ + if (len == 0) + return USB_STOR_XFER_GOOD; + + usb_stor_dbg(us, "len = %d\n", len); + return usb_stor_bulk_transfer_sg(us, us->recv_bulk_pipe, buf, len, use_sg, NULL); +} + +/* + * Convenience function to perform a bulk write + */ +static int usbat_bulk_write(struct us_data *us, + void* buf, + unsigned int len, + int use_sg) +{ + if (len == 0) + return USB_STOR_XFER_GOOD; + + usb_stor_dbg(us, "len = %d\n", len); + return usb_stor_bulk_transfer_sg(us, us->send_bulk_pipe, buf, len, use_sg, NULL); +} + +/* + * Some USBAT-specific commands can only be executed over a command transport + * This transport allows one (len=8) or two (len=16) vendor-specific commands + * to be executed. + */ +static int usbat_execute_command(struct us_data *us, + unsigned char *commands, + unsigned int len) +{ + return usb_stor_ctrl_transfer(us, us->send_ctrl_pipe, + USBAT_CMD_EXEC_CMD, 0x40, 0, 0, + commands, len); +} + +/* + * Read the status register + */ +static int usbat_get_status(struct us_data *us, unsigned char *status) +{ + int rc; + rc = usbat_read(us, USBAT_ATA, USBAT_ATA_STATUS, status); + + usb_stor_dbg(us, "0x%02X\n", *status); + return rc; +} + +/* + * Check the device status + */ +static int usbat_check_status(struct us_data *us) +{ + unsigned char *reply = us->iobuf; + int rc; + + rc = usbat_get_status(us, reply); + if (rc != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_FAILED; + + /* error/check condition (0x51 is ok) */ + if (*reply & 0x01 && *reply != 0x51) + return USB_STOR_TRANSPORT_FAILED; + + /* device fault */ + if (*reply & 0x20) + return USB_STOR_TRANSPORT_FAILED; + + return USB_STOR_TRANSPORT_GOOD; +} + +/* + * Stores critical information in internal registers in preparation for the execution + * of a conditional usbat_read_blocks or usbat_write_blocks call. + */ +static int usbat_set_shuttle_features(struct us_data *us, + unsigned char external_trigger, + unsigned char epp_control, + unsigned char mask_byte, + unsigned char test_pattern, + unsigned char subcountH, + unsigned char subcountL) +{ + unsigned char *command = us->iobuf; + + command[0] = 0x40; + command[1] = USBAT_CMD_SET_FEAT; + + /* + * The only bit relevant to ATA access is bit 6 + * which defines 8 bit data access (set) or 16 bit (unset) + */ + command[2] = epp_control; + + /* + * If FCQ is set in the qualifier (defined in R/W cmd), then bits U0, U1, + * ET1 and ET2 define an external event to be checked for on event of a + * _read_blocks or _write_blocks operation. The read/write will not take + * place unless the defined trigger signal is active. + */ + command[3] = external_trigger; + + /* + * The resultant byte of the mask operation (see mask_byte) is compared for + * equivalence with this test pattern. If equal, the read/write will take + * place. + */ + command[4] = test_pattern; + + /* + * This value is logically ANDed with the status register field specified + * in the read/write command. + */ + command[5] = mask_byte; + + /* + * If ALQ is set in the qualifier, this field contains the address of the + * registers where the byte count should be read for transferring the data. + * If ALQ is not set, then this field contains the number of bytes to be + * transferred. + */ + command[6] = subcountL; + command[7] = subcountH; + + return usbat_execute_command(us, command, 8); +} + +/* + * Block, waiting for an ATA device to become not busy or to report + * an error condition. + */ +static int usbat_wait_not_busy(struct us_data *us, int minutes) +{ + int i; + int result; + unsigned char *status = us->iobuf; + + /* Synchronizing cache on a CDR could take a heck of a long time, + * but probably not more than 10 minutes or so. On the other hand, + * doing a full blank on a CDRW at speed 1 will take about 75 + * minutes! + */ + + for (i=0; i<1200+minutes*60; i++) { + + result = usbat_get_status(us, status); + + if (result!=USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + if (*status & 0x01) { /* check condition */ + result = usbat_read(us, USBAT_ATA, 0x10, status); + return USB_STOR_TRANSPORT_FAILED; + } + if (*status & 0x20) /* device fault */ + return USB_STOR_TRANSPORT_FAILED; + + if ((*status & 0x80)==0x00) { /* not busy */ + usb_stor_dbg(us, "Waited not busy for %d steps\n", i); + return USB_STOR_TRANSPORT_GOOD; + } + + if (i<500) + msleep(10); /* 5 seconds */ + else if (i<700) + msleep(50); /* 10 seconds */ + else if (i<1200) + msleep(100); /* 50 seconds */ + else + msleep(1000); /* X minutes */ + } + + usb_stor_dbg(us, "Waited not busy for %d minutes, timing out\n", + minutes); + return USB_STOR_TRANSPORT_FAILED; +} + +/* + * Read block data from the data register + */ +static int usbat_read_block(struct us_data *us, + void* buf, + unsigned short len, + int use_sg) +{ + int result; + unsigned char *command = us->iobuf; + + if (!len) + return USB_STOR_TRANSPORT_GOOD; + + command[0] = 0xC0; + command[1] = USBAT_ATA | USBAT_CMD_READ_BLOCK; + command[2] = USBAT_ATA_DATA; + command[3] = 0; + command[4] = 0; + command[5] = 0; + command[6] = LSB_of(len); + command[7] = MSB_of(len); + + result = usbat_execute_command(us, command, 8); + if (result != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + result = usbat_bulk_read(us, buf, len, use_sg); + return (result == USB_STOR_XFER_GOOD ? + USB_STOR_TRANSPORT_GOOD : USB_STOR_TRANSPORT_ERROR); +} + +/* + * Write block data via the data register + */ +static int usbat_write_block(struct us_data *us, + unsigned char access, + void* buf, + unsigned short len, + int minutes, + int use_sg) +{ + int result; + unsigned char *command = us->iobuf; + + if (!len) + return USB_STOR_TRANSPORT_GOOD; + + command[0] = 0x40; + command[1] = access | USBAT_CMD_WRITE_BLOCK; + command[2] = USBAT_ATA_DATA; + command[3] = 0; + command[4] = 0; + command[5] = 0; + command[6] = LSB_of(len); + command[7] = MSB_of(len); + + result = usbat_execute_command(us, command, 8); + + if (result != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + result = usbat_bulk_write(us, buf, len, use_sg); + if (result != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + return usbat_wait_not_busy(us, minutes); +} + +/* + * Process read and write requests + */ +static int usbat_hp8200e_rw_block_test(struct us_data *us, + unsigned char access, + unsigned char *registers, + unsigned char *data_out, + unsigned short num_registers, + unsigned char data_reg, + unsigned char status_reg, + unsigned char timeout, + unsigned char qualifier, + int direction, + void *buf, + unsigned short len, + int use_sg, + int minutes) +{ + int result; + unsigned int pipe = (direction == DMA_FROM_DEVICE) ? + us->recv_bulk_pipe : us->send_bulk_pipe; + + unsigned char *command = us->iobuf; + int i, j; + int cmdlen; + unsigned char *data = us->iobuf; + unsigned char *status = us->iobuf; + + BUG_ON(num_registers > US_IOBUF_SIZE/2); + + for (i=0; i<20; i++) { + + /* + * The first time we send the full command, which consists + * of downloading the SCSI command followed by downloading + * the data via a write-and-test. Any other time we only + * send the command to download the data -- the SCSI command + * is still 'active' in some sense in the device. + * + * We're only going to try sending the data 10 times. After + * that, we just return a failure. + */ + + if (i==0) { + cmdlen = 16; + /* + * Write to multiple registers + * Not really sure the 0x07, 0x17, 0xfc, 0xe7 is + * necessary here, but that's what came out of the + * trace every single time. + */ + command[0] = 0x40; + command[1] = access | USBAT_CMD_WRITE_REGS; + command[2] = 0x07; + command[3] = 0x17; + command[4] = 0xFC; + command[5] = 0xE7; + command[6] = LSB_of(num_registers*2); + command[7] = MSB_of(num_registers*2); + } else + cmdlen = 8; + + /* Conditionally read or write blocks */ + command[cmdlen-8] = (direction==DMA_TO_DEVICE ? 0x40 : 0xC0); + command[cmdlen-7] = access | + (direction==DMA_TO_DEVICE ? + USBAT_CMD_COND_WRITE_BLOCK : USBAT_CMD_COND_READ_BLOCK); + command[cmdlen-6] = data_reg; + command[cmdlen-5] = status_reg; + command[cmdlen-4] = timeout; + command[cmdlen-3] = qualifier; + command[cmdlen-2] = LSB_of(len); + command[cmdlen-1] = MSB_of(len); + + result = usbat_execute_command(us, command, cmdlen); + + if (result != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + if (i==0) { + + for (j=0; j<num_registers; j++) { + data[j<<1] = registers[j]; + data[1+(j<<1)] = data_out[j]; + } + + result = usbat_bulk_write(us, data, num_registers*2, 0); + if (result != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + } + + result = usb_stor_bulk_transfer_sg(us, + pipe, buf, len, use_sg, NULL); + + /* + * If we get a stall on the bulk download, we'll retry + * the bulk download -- but not the SCSI command because + * in some sense the SCSI command is still 'active' and + * waiting for the data. Don't ask me why this should be; + * I'm only following what the Windoze driver did. + * + * Note that a stall for the test-and-read/write command means + * that the test failed. In this case we're testing to make + * sure that the device is error-free + * (i.e. bit 0 -- CHK -- of status is 0). The most likely + * hypothesis is that the USBAT chip somehow knows what + * the device will accept, but doesn't give the device any + * data until all data is received. Thus, the device would + * still be waiting for the first byte of data if a stall + * occurs, even if the stall implies that some data was + * transferred. + */ + + if (result == USB_STOR_XFER_SHORT || + result == USB_STOR_XFER_STALLED) { + + /* + * If we're reading and we stalled, then clear + * the bulk output pipe only the first time. + */ + + if (direction==DMA_FROM_DEVICE && i==0) { + if (usb_stor_clear_halt(us, + us->send_bulk_pipe) < 0) + return USB_STOR_TRANSPORT_ERROR; + } + + /* + * Read status: is the device angry, or just busy? + */ + + result = usbat_read(us, USBAT_ATA, + direction==DMA_TO_DEVICE ? + USBAT_ATA_STATUS : USBAT_ATA_ALTSTATUS, + status); + + if (result!=USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + if (*status & 0x01) /* check condition */ + return USB_STOR_TRANSPORT_FAILED; + if (*status & 0x20) /* device fault */ + return USB_STOR_TRANSPORT_FAILED; + + usb_stor_dbg(us, "Redoing %s\n", + direction == DMA_TO_DEVICE + ? "write" : "read"); + + } else if (result != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + else + return usbat_wait_not_busy(us, minutes); + + } + + usb_stor_dbg(us, "Bummer! %s bulk data 20 times failed\n", + direction == DMA_TO_DEVICE ? "Writing" : "Reading"); + + return USB_STOR_TRANSPORT_FAILED; +} + +/* + * Write to multiple registers: + * Allows us to write specific data to any registers. The data to be written + * gets packed in this sequence: reg0, data0, reg1, data1, ..., regN, dataN + * which gets sent through bulk out. + * Not designed for large transfers of data! + */ +static int usbat_multiple_write(struct us_data *us, + unsigned char *registers, + unsigned char *data_out, + unsigned short num_registers) +{ + int i, result; + unsigned char *data = us->iobuf; + unsigned char *command = us->iobuf; + + BUG_ON(num_registers > US_IOBUF_SIZE/2); + + /* Write to multiple registers, ATA access */ + command[0] = 0x40; + command[1] = USBAT_ATA | USBAT_CMD_WRITE_REGS; + + /* No relevance */ + command[2] = 0; + command[3] = 0; + command[4] = 0; + command[5] = 0; + + /* Number of bytes to be transferred (incl. addresses and data) */ + command[6] = LSB_of(num_registers*2); + command[7] = MSB_of(num_registers*2); + + /* The setup command */ + result = usbat_execute_command(us, command, 8); + if (result != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + /* Create the reg/data, reg/data sequence */ + for (i=0; i<num_registers; i++) { + data[i<<1] = registers[i]; + data[1+(i<<1)] = data_out[i]; + } + + /* Send the data */ + result = usbat_bulk_write(us, data, num_registers*2, 0); + if (result != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + if (usbat_get_device_type(us) == USBAT_DEV_HP8200) + return usbat_wait_not_busy(us, 0); + else + return USB_STOR_TRANSPORT_GOOD; +} + +/* + * Conditionally read blocks from device: + * Allows us to read blocks from a specific data register, based upon the + * condition that a status register can be successfully masked with a status + * qualifier. If this condition is not initially met, the read will wait + * up until a maximum amount of time has elapsed, as specified by timeout. + * The read will start when the condition is met, otherwise the command aborts. + * + * The qualifier defined here is not the value that is masked, it defines + * conditions for the write to take place. The actual masked qualifier (and + * other related details) are defined beforehand with _set_shuttle_features(). + */ +static int usbat_read_blocks(struct us_data *us, + void* buffer, + int len, + int use_sg) +{ + int result; + unsigned char *command = us->iobuf; + + command[0] = 0xC0; + command[1] = USBAT_ATA | USBAT_CMD_COND_READ_BLOCK; + command[2] = USBAT_ATA_DATA; + command[3] = USBAT_ATA_STATUS; + command[4] = 0xFD; /* Timeout (ms); */ + command[5] = USBAT_QUAL_FCQ; + command[6] = LSB_of(len); + command[7] = MSB_of(len); + + /* Multiple block read setup command */ + result = usbat_execute_command(us, command, 8); + if (result != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_FAILED; + + /* Read the blocks we just asked for */ + result = usbat_bulk_read(us, buffer, len, use_sg); + if (result != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_FAILED; + + return USB_STOR_TRANSPORT_GOOD; +} + +/* + * Conditionally write blocks to device: + * Allows us to write blocks to a specific data register, based upon the + * condition that a status register can be successfully masked with a status + * qualifier. If this condition is not initially met, the write will wait + * up until a maximum amount of time has elapsed, as specified by timeout. + * The read will start when the condition is met, otherwise the command aborts. + * + * The qualifier defined here is not the value that is masked, it defines + * conditions for the write to take place. The actual masked qualifier (and + * other related details) are defined beforehand with _set_shuttle_features(). + */ +static int usbat_write_blocks(struct us_data *us, + void* buffer, + int len, + int use_sg) +{ + int result; + unsigned char *command = us->iobuf; + + command[0] = 0x40; + command[1] = USBAT_ATA | USBAT_CMD_COND_WRITE_BLOCK; + command[2] = USBAT_ATA_DATA; + command[3] = USBAT_ATA_STATUS; + command[4] = 0xFD; /* Timeout (ms) */ + command[5] = USBAT_QUAL_FCQ; + command[6] = LSB_of(len); + command[7] = MSB_of(len); + + /* Multiple block write setup command */ + result = usbat_execute_command(us, command, 8); + if (result != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_FAILED; + + /* Write the data */ + result = usbat_bulk_write(us, buffer, len, use_sg); + if (result != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_FAILED; + + return USB_STOR_TRANSPORT_GOOD; +} + +/* + * Read the User IO register + */ +static int usbat_read_user_io(struct us_data *us, unsigned char *data_flags) +{ + int result; + + result = usb_stor_ctrl_transfer(us, + us->recv_ctrl_pipe, + USBAT_CMD_UIO, + 0xC0, + 0, + 0, + data_flags, + USBAT_UIO_READ); + + usb_stor_dbg(us, "UIO register reads %02X\n", *data_flags); + + return result; +} + +/* + * Write to the User IO register + */ +static int usbat_write_user_io(struct us_data *us, + unsigned char enable_flags, + unsigned char data_flags) +{ + return usb_stor_ctrl_transfer(us, + us->send_ctrl_pipe, + USBAT_CMD_UIO, + 0x40, + short_pack(enable_flags, data_flags), + 0, + NULL, + USBAT_UIO_WRITE); +} + +/* + * Reset the device + * Often needed on media change. + */ +static int usbat_device_reset(struct us_data *us) +{ + int rc; + + /* + * Reset peripheral, enable peripheral control signals + * (bring reset signal up) + */ + rc = usbat_write_user_io(us, + USBAT_UIO_DRVRST | USBAT_UIO_OE1 | USBAT_UIO_OE0, + USBAT_UIO_EPAD | USBAT_UIO_1); + if (rc != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + /* + * Enable peripheral control signals + * (bring reset signal down) + */ + rc = usbat_write_user_io(us, + USBAT_UIO_OE1 | USBAT_UIO_OE0, + USBAT_UIO_EPAD | USBAT_UIO_1); + if (rc != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + return USB_STOR_TRANSPORT_GOOD; +} + +/* + * Enable card detect + */ +static int usbat_device_enable_cdt(struct us_data *us) +{ + int rc; + + /* Enable peripheral control signals and card detect */ + rc = usbat_write_user_io(us, + USBAT_UIO_ACKD | USBAT_UIO_OE1 | USBAT_UIO_OE0, + USBAT_UIO_EPAD | USBAT_UIO_1); + if (rc != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + return USB_STOR_TRANSPORT_GOOD; +} + +/* + * Determine if media is present. + */ +static int usbat_flash_check_media_present(struct us_data *us, + unsigned char *uio) +{ + if (*uio & USBAT_UIO_UI0) { + usb_stor_dbg(us, "no media detected\n"); + return USBAT_FLASH_MEDIA_NONE; + } + + return USBAT_FLASH_MEDIA_CF; +} + +/* + * Determine if media has changed since last operation + */ +static int usbat_flash_check_media_changed(struct us_data *us, + unsigned char *uio) +{ + if (*uio & USBAT_UIO_0) { + usb_stor_dbg(us, "media change detected\n"); + return USBAT_FLASH_MEDIA_CHANGED; + } + + return USBAT_FLASH_MEDIA_SAME; +} + +/* + * Check for media change / no media and handle the situation appropriately + */ +static int usbat_flash_check_media(struct us_data *us, + struct usbat_info *info) +{ + int rc; + unsigned char *uio = us->iobuf; + + rc = usbat_read_user_io(us, uio); + if (rc != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + /* Check for media existence */ + rc = usbat_flash_check_media_present(us, uio); + if (rc == USBAT_FLASH_MEDIA_NONE) { + info->sense_key = 0x02; + info->sense_asc = 0x3A; + info->sense_ascq = 0x00; + return USB_STOR_TRANSPORT_FAILED; + } + + /* Check for media change */ + rc = usbat_flash_check_media_changed(us, uio); + if (rc == USBAT_FLASH_MEDIA_CHANGED) { + + /* Reset and re-enable card detect */ + rc = usbat_device_reset(us); + if (rc != USB_STOR_TRANSPORT_GOOD) + return rc; + rc = usbat_device_enable_cdt(us); + if (rc != USB_STOR_TRANSPORT_GOOD) + return rc; + + msleep(50); + + rc = usbat_read_user_io(us, uio); + if (rc != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + info->sense_key = UNIT_ATTENTION; + info->sense_asc = 0x28; + info->sense_ascq = 0x00; + return USB_STOR_TRANSPORT_FAILED; + } + + return USB_STOR_TRANSPORT_GOOD; +} + +/* + * Determine whether we are controlling a flash-based reader/writer, + * or a HP8200-based CD drive. + * Sets transport functions as appropriate. + */ +static int usbat_identify_device(struct us_data *us, + struct usbat_info *info) +{ + int rc; + unsigned char status; + + if (!us || !info) + return USB_STOR_TRANSPORT_ERROR; + + rc = usbat_device_reset(us); + if (rc != USB_STOR_TRANSPORT_GOOD) + return rc; + msleep(500); + + /* + * In attempt to distinguish between HP CDRW's and Flash readers, we now + * execute the IDENTIFY PACKET DEVICE command. On ATA devices (i.e. flash + * readers), this command should fail with error. On ATAPI devices (i.e. + * CDROM drives), it should succeed. + */ + rc = usbat_write(us, USBAT_ATA, USBAT_ATA_CMD, 0xA1); + if (rc != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + rc = usbat_get_status(us, &status); + if (rc != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + /* Check for error bit, or if the command 'fell through' */ + if (status == 0xA1 || !(status & 0x01)) { + /* Device is HP 8200 */ + usb_stor_dbg(us, "Detected HP8200 CDRW\n"); + info->devicetype = USBAT_DEV_HP8200; + } else { + /* Device is a CompactFlash reader/writer */ + usb_stor_dbg(us, "Detected Flash reader/writer\n"); + info->devicetype = USBAT_DEV_FLASH; + } + + return USB_STOR_TRANSPORT_GOOD; +} + +/* + * Set the transport function based on the device type + */ +static int usbat_set_transport(struct us_data *us, + struct usbat_info *info, + int devicetype) +{ + + if (!info->devicetype) + info->devicetype = devicetype; + + if (!info->devicetype) + usbat_identify_device(us, info); + + switch (info->devicetype) { + default: + return USB_STOR_TRANSPORT_ERROR; + + case USBAT_DEV_HP8200: + us->transport = usbat_hp8200e_transport; + break; + + case USBAT_DEV_FLASH: + us->transport = usbat_flash_transport; + break; + } + + return 0; +} + +/* + * Read the media capacity + */ +static int usbat_flash_get_sector_count(struct us_data *us, + struct usbat_info *info) +{ + unsigned char registers[3] = { + USBAT_ATA_SECCNT, + USBAT_ATA_DEVICE, + USBAT_ATA_CMD, + }; + unsigned char command[3] = { 0x01, 0xA0, 0xEC }; + unsigned char *reply; + unsigned char status; + int rc; + + if (!us || !info) + return USB_STOR_TRANSPORT_ERROR; + + reply = kmalloc(512, GFP_NOIO); + if (!reply) + return USB_STOR_TRANSPORT_ERROR; + + /* ATA command : IDENTIFY DEVICE */ + rc = usbat_multiple_write(us, registers, command, 3); + if (rc != USB_STOR_XFER_GOOD) { + usb_stor_dbg(us, "Gah! identify_device failed\n"); + rc = USB_STOR_TRANSPORT_ERROR; + goto leave; + } + + /* Read device status */ + if (usbat_get_status(us, &status) != USB_STOR_XFER_GOOD) { + rc = USB_STOR_TRANSPORT_ERROR; + goto leave; + } + + msleep(100); + + /* Read the device identification data */ + rc = usbat_read_block(us, reply, 512, 0); + if (rc != USB_STOR_TRANSPORT_GOOD) + goto leave; + + info->sectors = ((u32)(reply[117]) << 24) | + ((u32)(reply[116]) << 16) | + ((u32)(reply[115]) << 8) | + ((u32)(reply[114]) ); + + rc = USB_STOR_TRANSPORT_GOOD; + + leave: + kfree(reply); + return rc; +} + +/* + * Read data from device + */ +static int usbat_flash_read_data(struct us_data *us, + struct usbat_info *info, + u32 sector, + u32 sectors) +{ + unsigned char registers[7] = { + USBAT_ATA_FEATURES, + USBAT_ATA_SECCNT, + USBAT_ATA_SECNUM, + USBAT_ATA_LBA_ME, + USBAT_ATA_LBA_HI, + USBAT_ATA_DEVICE, + USBAT_ATA_STATUS, + }; + unsigned char command[7]; + unsigned char *buffer; + unsigned char thistime; + unsigned int totallen, alloclen; + int len, result; + unsigned int sg_offset = 0; + struct scatterlist *sg = NULL; + + result = usbat_flash_check_media(us, info); + if (result != USB_STOR_TRANSPORT_GOOD) + return result; + + /* + * we're working in LBA mode. according to the ATA spec, + * we can support up to 28-bit addressing. I don't know if Jumpshot + * supports beyond 24-bit addressing. It's kind of hard to test + * since it requires > 8GB CF card. + */ + + if (sector > 0x0FFFFFFF) + return USB_STOR_TRANSPORT_ERROR; + + totallen = sectors * info->ssize; + + /* + * Since we don't read more than 64 KB at a time, we have to create + * a bounce buffer and move the data a piece at a time between the + * bounce buffer and the actual transfer buffer. + */ + + alloclen = min(totallen, 65536u); + buffer = kmalloc(alloclen, GFP_NOIO); + if (buffer == NULL) + return USB_STOR_TRANSPORT_ERROR; + + do { + /* + * loop, never allocate or transfer more than 64k at once + * (min(128k, 255*info->ssize) is the real limit) + */ + len = min(totallen, alloclen); + thistime = (len / info->ssize) & 0xff; + + /* ATA command 0x20 (READ SECTORS) */ + usbat_pack_ata_sector_cmd(command, thistime, sector, 0x20); + + /* Write/execute ATA read command */ + result = usbat_multiple_write(us, registers, command, 7); + if (result != USB_STOR_TRANSPORT_GOOD) + goto leave; + + /* Read the data we just requested */ + result = usbat_read_blocks(us, buffer, len, 0); + if (result != USB_STOR_TRANSPORT_GOOD) + goto leave; + + usb_stor_dbg(us, "%d bytes\n", len); + + /* Store the data in the transfer buffer */ + usb_stor_access_xfer_buf(buffer, len, us->srb, + &sg, &sg_offset, TO_XFER_BUF); + + sector += thistime; + totallen -= len; + } while (totallen > 0); + + kfree(buffer); + return USB_STOR_TRANSPORT_GOOD; + +leave: + kfree(buffer); + return USB_STOR_TRANSPORT_ERROR; +} + +/* + * Write data to device + */ +static int usbat_flash_write_data(struct us_data *us, + struct usbat_info *info, + u32 sector, + u32 sectors) +{ + unsigned char registers[7] = { + USBAT_ATA_FEATURES, + USBAT_ATA_SECCNT, + USBAT_ATA_SECNUM, + USBAT_ATA_LBA_ME, + USBAT_ATA_LBA_HI, + USBAT_ATA_DEVICE, + USBAT_ATA_STATUS, + }; + unsigned char command[7]; + unsigned char *buffer; + unsigned char thistime; + unsigned int totallen, alloclen; + int len, result; + unsigned int sg_offset = 0; + struct scatterlist *sg = NULL; + + result = usbat_flash_check_media(us, info); + if (result != USB_STOR_TRANSPORT_GOOD) + return result; + + /* + * we're working in LBA mode. according to the ATA spec, + * we can support up to 28-bit addressing. I don't know if the device + * supports beyond 24-bit addressing. It's kind of hard to test + * since it requires > 8GB media. + */ + + if (sector > 0x0FFFFFFF) + return USB_STOR_TRANSPORT_ERROR; + + totallen = sectors * info->ssize; + + /* + * Since we don't write more than 64 KB at a time, we have to create + * a bounce buffer and move the data a piece at a time between the + * bounce buffer and the actual transfer buffer. + */ + + alloclen = min(totallen, 65536u); + buffer = kmalloc(alloclen, GFP_NOIO); + if (buffer == NULL) + return USB_STOR_TRANSPORT_ERROR; + + do { + /* + * loop, never allocate or transfer more than 64k at once + * (min(128k, 255*info->ssize) is the real limit) + */ + len = min(totallen, alloclen); + thistime = (len / info->ssize) & 0xff; + + /* Get the data from the transfer buffer */ + usb_stor_access_xfer_buf(buffer, len, us->srb, + &sg, &sg_offset, FROM_XFER_BUF); + + /* ATA command 0x30 (WRITE SECTORS) */ + usbat_pack_ata_sector_cmd(command, thistime, sector, 0x30); + + /* Write/execute ATA write command */ + result = usbat_multiple_write(us, registers, command, 7); + if (result != USB_STOR_TRANSPORT_GOOD) + goto leave; + + /* Write the data */ + result = usbat_write_blocks(us, buffer, len, 0); + if (result != USB_STOR_TRANSPORT_GOOD) + goto leave; + + sector += thistime; + totallen -= len; + } while (totallen > 0); + + kfree(buffer); + return result; + +leave: + kfree(buffer); + return USB_STOR_TRANSPORT_ERROR; +} + +/* + * Squeeze a potentially huge (> 65535 byte) read10 command into + * a little ( <= 65535 byte) ATAPI pipe + */ +static int usbat_hp8200e_handle_read10(struct us_data *us, + unsigned char *registers, + unsigned char *data, + struct scsi_cmnd *srb) +{ + int result = USB_STOR_TRANSPORT_GOOD; + unsigned char *buffer; + unsigned int len; + unsigned int sector; + unsigned int sg_offset = 0; + struct scatterlist *sg = NULL; + + usb_stor_dbg(us, "transfersize %d\n", srb->transfersize); + + if (scsi_bufflen(srb) < 0x10000) { + + result = usbat_hp8200e_rw_block_test(us, USBAT_ATA, + registers, data, 19, + USBAT_ATA_DATA, USBAT_ATA_STATUS, 0xFD, + (USBAT_QUAL_FCQ | USBAT_QUAL_ALQ), + DMA_FROM_DEVICE, + scsi_sglist(srb), + scsi_bufflen(srb), scsi_sg_count(srb), 1); + + return result; + } + + /* + * Since we're requesting more data than we can handle in + * a single read command (max is 64k-1), we will perform + * multiple reads, but each read must be in multiples of + * a sector. Luckily the sector size is in srb->transfersize + * (see linux/drivers/scsi/sr.c). + */ + + if (data[7+0] == GPCMD_READ_CD) { + len = short_pack(data[7+9], data[7+8]); + len <<= 16; + len |= data[7+7]; + usb_stor_dbg(us, "GPCMD_READ_CD: len %d\n", len); + srb->transfersize = scsi_bufflen(srb)/len; + } + + if (!srb->transfersize) { + srb->transfersize = 2048; /* A guess */ + usb_stor_dbg(us, "transfersize 0, forcing %d\n", + srb->transfersize); + } + + /* + * Since we only read in one block at a time, we have to create + * a bounce buffer and move the data a piece at a time between the + * bounce buffer and the actual transfer buffer. + */ + + len = (65535/srb->transfersize) * srb->transfersize; + usb_stor_dbg(us, "Max read is %d bytes\n", len); + len = min(len, scsi_bufflen(srb)); + buffer = kmalloc(len, GFP_NOIO); + if (buffer == NULL) /* bloody hell! */ + return USB_STOR_TRANSPORT_FAILED; + sector = short_pack(data[7+3], data[7+2]); + sector <<= 16; + sector |= short_pack(data[7+5], data[7+4]); + transferred = 0; + + while (transferred != scsi_bufflen(srb)) { + + if (len > scsi_bufflen(srb) - transferred) + len = scsi_bufflen(srb) - transferred; + + data[3] = len&0xFF; /* (cylL) = expected length (L) */ + data[4] = (len>>8)&0xFF; /* (cylH) = expected length (H) */ + + /* Fix up the SCSI command sector and num sectors */ + + data[7+2] = MSB_of(sector>>16); /* SCSI command sector */ + data[7+3] = LSB_of(sector>>16); + data[7+4] = MSB_of(sector&0xFFFF); + data[7+5] = LSB_of(sector&0xFFFF); + if (data[7+0] == GPCMD_READ_CD) + data[7+6] = 0; + data[7+7] = MSB_of(len / srb->transfersize); /* SCSI command */ + data[7+8] = LSB_of(len / srb->transfersize); /* num sectors */ + + result = usbat_hp8200e_rw_block_test(us, USBAT_ATA, + registers, data, 19, + USBAT_ATA_DATA, USBAT_ATA_STATUS, 0xFD, + (USBAT_QUAL_FCQ | USBAT_QUAL_ALQ), + DMA_FROM_DEVICE, + buffer, + len, 0, 1); + + if (result != USB_STOR_TRANSPORT_GOOD) + break; + + /* Store the data in the transfer buffer */ + usb_stor_access_xfer_buf(buffer, len, srb, + &sg, &sg_offset, TO_XFER_BUF); + + /* Update the amount transferred and the sector number */ + + transferred += len; + sector += len / srb->transfersize; + + } /* while transferred != scsi_bufflen(srb) */ + + kfree(buffer); + return result; +} + +static int usbat_select_and_test_registers(struct us_data *us) +{ + int selector; + unsigned char *status = us->iobuf; + + /* try device = master, then device = slave. */ + for (selector = 0xA0; selector <= 0xB0; selector += 0x10) { + if (usbat_write(us, USBAT_ATA, USBAT_ATA_DEVICE, selector) != + USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + if (usbat_read(us, USBAT_ATA, USBAT_ATA_STATUS, status) != + USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + if (usbat_read(us, USBAT_ATA, USBAT_ATA_DEVICE, status) != + USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_ME, status) != + USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_HI, status) != + USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + if (usbat_write(us, USBAT_ATA, USBAT_ATA_LBA_ME, 0x55) != + USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + if (usbat_write(us, USBAT_ATA, USBAT_ATA_LBA_HI, 0xAA) != + USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_ME, status) != + USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_ME, status) != + USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + } + + return USB_STOR_TRANSPORT_GOOD; +} + +/* + * Initialize the USBAT processor and the storage device + */ +static int init_usbat(struct us_data *us, int devicetype) +{ + int rc; + struct usbat_info *info; + unsigned char subcountH = USBAT_ATA_LBA_HI; + unsigned char subcountL = USBAT_ATA_LBA_ME; + unsigned char *status = us->iobuf; + + us->extra = kzalloc(sizeof(struct usbat_info), GFP_NOIO); + if (!us->extra) + return 1; + + info = (struct usbat_info *) (us->extra); + + /* Enable peripheral control signals */ + rc = usbat_write_user_io(us, + USBAT_UIO_OE1 | USBAT_UIO_OE0, + USBAT_UIO_EPAD | USBAT_UIO_1); + if (rc != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + usb_stor_dbg(us, "INIT 1\n"); + + msleep(2000); + + rc = usbat_read_user_io(us, status); + if (rc != USB_STOR_TRANSPORT_GOOD) + return rc; + + usb_stor_dbg(us, "INIT 2\n"); + + rc = usbat_read_user_io(us, status); + if (rc != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + rc = usbat_read_user_io(us, status); + if (rc != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + usb_stor_dbg(us, "INIT 3\n"); + + rc = usbat_select_and_test_registers(us); + if (rc != USB_STOR_TRANSPORT_GOOD) + return rc; + + usb_stor_dbg(us, "INIT 4\n"); + + rc = usbat_read_user_io(us, status); + if (rc != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + usb_stor_dbg(us, "INIT 5\n"); + + /* Enable peripheral control signals and card detect */ + rc = usbat_device_enable_cdt(us); + if (rc != USB_STOR_TRANSPORT_GOOD) + return rc; + + usb_stor_dbg(us, "INIT 6\n"); + + rc = usbat_read_user_io(us, status); + if (rc != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + usb_stor_dbg(us, "INIT 7\n"); + + msleep(1400); + + rc = usbat_read_user_io(us, status); + if (rc != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + usb_stor_dbg(us, "INIT 8\n"); + + rc = usbat_select_and_test_registers(us); + if (rc != USB_STOR_TRANSPORT_GOOD) + return rc; + + usb_stor_dbg(us, "INIT 9\n"); + + /* At this point, we need to detect which device we are using */ + if (usbat_set_transport(us, info, devicetype)) + return USB_STOR_TRANSPORT_ERROR; + + usb_stor_dbg(us, "INIT 10\n"); + + if (usbat_get_device_type(us) == USBAT_DEV_FLASH) { + subcountH = 0x02; + subcountL = 0x00; + } + rc = usbat_set_shuttle_features(us, (USBAT_FEAT_ETEN | USBAT_FEAT_ET2 | USBAT_FEAT_ET1), + 0x00, 0x88, 0x08, subcountH, subcountL); + if (rc != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + usb_stor_dbg(us, "INIT 11\n"); + + return USB_STOR_TRANSPORT_GOOD; +} + +/* + * Transport for the HP 8200e + */ +static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us) +{ + int result; + unsigned char *status = us->iobuf; + unsigned char registers[32]; + unsigned char data[32]; + unsigned int len; + int i; + + len = scsi_bufflen(srb); + + /* Send A0 (ATA PACKET COMMAND). + Note: I guess we're never going to get any of the ATA + commands... just ATA Packet Commands. + */ + + registers[0] = USBAT_ATA_FEATURES; + registers[1] = USBAT_ATA_SECCNT; + registers[2] = USBAT_ATA_SECNUM; + registers[3] = USBAT_ATA_LBA_ME; + registers[4] = USBAT_ATA_LBA_HI; + registers[5] = USBAT_ATA_DEVICE; + registers[6] = USBAT_ATA_CMD; + data[0] = 0x00; + data[1] = 0x00; + data[2] = 0x00; + data[3] = len&0xFF; /* (cylL) = expected length (L) */ + data[4] = (len>>8)&0xFF; /* (cylH) = expected length (H) */ + data[5] = 0xB0; /* (device sel) = slave */ + data[6] = 0xA0; /* (command) = ATA PACKET COMMAND */ + + for (i=7; i<19; i++) { + registers[i] = 0x10; + data[i] = (i-7 >= srb->cmd_len) ? 0 : srb->cmnd[i-7]; + } + + result = usbat_get_status(us, status); + usb_stor_dbg(us, "Status = %02X\n", *status); + if (result != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + if (srb->cmnd[0] == TEST_UNIT_READY) + transferred = 0; + + if (srb->sc_data_direction == DMA_TO_DEVICE) { + + result = usbat_hp8200e_rw_block_test(us, USBAT_ATA, + registers, data, 19, + USBAT_ATA_DATA, USBAT_ATA_STATUS, 0xFD, + (USBAT_QUAL_FCQ | USBAT_QUAL_ALQ), + DMA_TO_DEVICE, + scsi_sglist(srb), + len, scsi_sg_count(srb), 10); + + if (result == USB_STOR_TRANSPORT_GOOD) { + transferred += len; + usb_stor_dbg(us, "Wrote %08X bytes\n", transferred); + } + + return result; + + } else if (srb->cmnd[0] == READ_10 || + srb->cmnd[0] == GPCMD_READ_CD) { + + return usbat_hp8200e_handle_read10(us, registers, data, srb); + + } + + if (len > 0xFFFF) { + usb_stor_dbg(us, "Error: len = %08X... what do I do now?\n", + len); + return USB_STOR_TRANSPORT_ERROR; + } + + result = usbat_multiple_write(us, registers, data, 7); + + if (result != USB_STOR_TRANSPORT_GOOD) + return result; + + /* + * Write the 12-byte command header. + * + * If the command is BLANK then set the timer for 75 minutes. + * Otherwise set it for 10 minutes. + * + * NOTE: THE 8200 DOCUMENTATION STATES THAT BLANKING A CDRW + * AT SPEED 4 IS UNRELIABLE!!! + */ + + result = usbat_write_block(us, USBAT_ATA, srb->cmnd, 12, + srb->cmnd[0] == GPCMD_BLANK ? 75 : 10, 0); + + if (result != USB_STOR_TRANSPORT_GOOD) + return result; + + /* If there is response data to be read in then do it here. */ + + if (len != 0 && (srb->sc_data_direction == DMA_FROM_DEVICE)) { + + /* How many bytes to read in? Check cylL register */ + + if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_ME, status) != + USB_STOR_XFER_GOOD) { + return USB_STOR_TRANSPORT_ERROR; + } + + if (len > 0xFF) { /* need to read cylH also */ + len = *status; + if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_HI, status) != + USB_STOR_XFER_GOOD) { + return USB_STOR_TRANSPORT_ERROR; + } + len += ((unsigned int) *status)<<8; + } + else + len = *status; + + + result = usbat_read_block(us, scsi_sglist(srb), len, + scsi_sg_count(srb)); + } + + return result; +} + +/* + * Transport for USBAT02-based CompactFlash and similar storage devices + */ +static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us) +{ + int rc; + struct usbat_info *info = (struct usbat_info *) (us->extra); + unsigned long block, blocks; + unsigned char *ptr = us->iobuf; + static unsigned char inquiry_response[36] = { + 0x00, 0x80, 0x00, 0x01, 0x1F, 0x00, 0x00, 0x00 + }; + + if (srb->cmnd[0] == INQUIRY) { + usb_stor_dbg(us, "INQUIRY - Returning bogus response\n"); + memcpy(ptr, inquiry_response, sizeof(inquiry_response)); + fill_inquiry_response(us, ptr, 36); + return USB_STOR_TRANSPORT_GOOD; + } + + if (srb->cmnd[0] == READ_CAPACITY) { + rc = usbat_flash_check_media(us, info); + if (rc != USB_STOR_TRANSPORT_GOOD) + return rc; + + rc = usbat_flash_get_sector_count(us, info); + if (rc != USB_STOR_TRANSPORT_GOOD) + return rc; + + /* hard coded 512 byte sectors as per ATA spec */ + info->ssize = 0x200; + usb_stor_dbg(us, "READ_CAPACITY: %ld sectors, %ld bytes per sector\n", + info->sectors, info->ssize); + + /* + * build the reply + * note: must return the sector number of the last sector, + * *not* the total number of sectors + */ + ((__be32 *) ptr)[0] = cpu_to_be32(info->sectors - 1); + ((__be32 *) ptr)[1] = cpu_to_be32(info->ssize); + usb_stor_set_xfer_buf(ptr, 8, srb); + + return USB_STOR_TRANSPORT_GOOD; + } + + if (srb->cmnd[0] == MODE_SELECT_10) { + usb_stor_dbg(us, "Gah! MODE_SELECT_10\n"); + return USB_STOR_TRANSPORT_ERROR; + } + + if (srb->cmnd[0] == READ_10) { + block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) | + ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5])); + + blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8])); + + usb_stor_dbg(us, "READ_10: read block 0x%04lx count %ld\n", + block, blocks); + return usbat_flash_read_data(us, info, block, blocks); + } + + if (srb->cmnd[0] == READ_12) { + /* + * I don't think we'll ever see a READ_12 but support it anyway + */ + block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) | + ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5])); + + blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) | + ((u32)(srb->cmnd[8]) << 8) | ((u32)(srb->cmnd[9])); + + usb_stor_dbg(us, "READ_12: read block 0x%04lx count %ld\n", + block, blocks); + return usbat_flash_read_data(us, info, block, blocks); + } + + if (srb->cmnd[0] == WRITE_10) { + block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) | + ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5])); + + blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8])); + + usb_stor_dbg(us, "WRITE_10: write block 0x%04lx count %ld\n", + block, blocks); + return usbat_flash_write_data(us, info, block, blocks); + } + + if (srb->cmnd[0] == WRITE_12) { + /* + * I don't think we'll ever see a WRITE_12 but support it anyway + */ + block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) | + ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5])); + + blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) | + ((u32)(srb->cmnd[8]) << 8) | ((u32)(srb->cmnd[9])); + + usb_stor_dbg(us, "WRITE_12: write block 0x%04lx count %ld\n", + block, blocks); + return usbat_flash_write_data(us, info, block, blocks); + } + + + if (srb->cmnd[0] == TEST_UNIT_READY) { + usb_stor_dbg(us, "TEST_UNIT_READY\n"); + + rc = usbat_flash_check_media(us, info); + if (rc != USB_STOR_TRANSPORT_GOOD) + return rc; + + return usbat_check_status(us); + } + + if (srb->cmnd[0] == REQUEST_SENSE) { + usb_stor_dbg(us, "REQUEST_SENSE\n"); + + memset(ptr, 0, 18); + ptr[0] = 0xF0; + ptr[2] = info->sense_key; + ptr[7] = 11; + ptr[12] = info->sense_asc; + ptr[13] = info->sense_ascq; + usb_stor_set_xfer_buf(ptr, 18, srb); + + return USB_STOR_TRANSPORT_GOOD; + } + + if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) { + /* + * sure. whatever. not like we can stop the user from popping + * the media out of the device (no locking doors, etc) + */ + return USB_STOR_TRANSPORT_GOOD; + } + + usb_stor_dbg(us, "Gah! Unknown command: %d (0x%x)\n", + srb->cmnd[0], srb->cmnd[0]); + info->sense_key = 0x05; + info->sense_asc = 0x20; + info->sense_ascq = 0x00; + return USB_STOR_TRANSPORT_FAILED; +} + +static int init_usbat_cd(struct us_data *us) +{ + return init_usbat(us, USBAT_DEV_HP8200); +} + +static int init_usbat_flash(struct us_data *us) +{ + return init_usbat(us, USBAT_DEV_FLASH); +} + +static int usbat_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct us_data *us; + int result; + + result = usb_stor_probe1(&us, intf, id, + (id - usbat_usb_ids) + usbat_unusual_dev_list); + if (result) + return result; + + /* The actual transport will be determined later by the + * initialization routine; this is just a placeholder. + */ + us->transport_name = "Shuttle USBAT"; + us->transport = usbat_flash_transport; + us->transport_reset = usb_stor_CB_reset; + us->max_lun = 0; + + result = usb_stor_probe2(us); + return result; +} + +static struct usb_driver usbat_driver = { + .name = "ums-usbat", + .probe = usbat_probe, + .disconnect = usb_stor_disconnect, + .suspend = usb_stor_suspend, + .resume = usb_stor_resume, + .reset_resume = usb_stor_reset_resume, + .pre_reset = usb_stor_pre_reset, + .post_reset = usb_stor_post_reset, + .id_table = usbat_usb_ids, + .soft_unbind = 1, + .no_dynamic_id = 1, +}; + +module_usb_driver(usbat_driver); diff --git a/kernel/drivers/usb/storage/sierra_ms.c b/kernel/drivers/usb/storage/sierra_ms.c new file mode 100644 index 000000000..2ea657be1 --- /dev/null +++ b/kernel/drivers/usb/storage/sierra_ms.c @@ -0,0 +1,199 @@ +#include <scsi/scsi.h> +#include <scsi/scsi_host.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_device.h> +#include <linux/usb.h> +#include <linux/module.h> +#include <linux/slab.h> + +#include "usb.h" +#include "transport.h" +#include "protocol.h" +#include "scsiglue.h" +#include "sierra_ms.h" +#include "debug.h" + +#define SWIMS_USB_REQUEST_SetSwocMode 0x0B +#define SWIMS_USB_REQUEST_GetSwocInfo 0x0A +#define SWIMS_USB_INDEX_SetMode 0x0000 +#define SWIMS_SET_MODE_Modem 0x0001 + +#define TRU_NORMAL 0x01 +#define TRU_FORCE_MS 0x02 +#define TRU_FORCE_MODEM 0x03 + +static unsigned int swi_tru_install = 1; +module_param(swi_tru_install, uint, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(swi_tru_install, "TRU-Install mode (1=Full Logic (def)," + " 2=Force CD-Rom, 3=Force Modem)"); + +struct swoc_info { + __u8 rev; + __u8 reserved[8]; + __u16 LinuxSKU; + __u16 LinuxVer; + __u8 reserved2[47]; +} __attribute__((__packed__)); + +static bool containsFullLinuxPackage(struct swoc_info *swocInfo) +{ + if ((swocInfo->LinuxSKU >= 0x2100 && swocInfo->LinuxSKU <= 0x2FFF) || + (swocInfo->LinuxSKU >= 0x7100 && swocInfo->LinuxSKU <= 0x7FFF)) + return true; + else + return false; +} + +static int sierra_set_ms_mode(struct usb_device *udev, __u16 eSWocMode) +{ + int result; + dev_dbg(&udev->dev, "SWIMS: %s", "DEVICE MODE SWITCH\n"); + result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + SWIMS_USB_REQUEST_SetSwocMode, /* __u8 request */ + USB_TYPE_VENDOR | USB_DIR_OUT, /* __u8 request type */ + eSWocMode, /* __u16 value */ + 0x0000, /* __u16 index */ + NULL, /* void *data */ + 0, /* __u16 size */ + USB_CTRL_SET_TIMEOUT); /* int timeout */ + return result; +} + + +static int sierra_get_swoc_info(struct usb_device *udev, + struct swoc_info *swocInfo) +{ + int result; + + dev_dbg(&udev->dev, "SWIMS: Attempting to get TRU-Install info\n"); + + result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), + SWIMS_USB_REQUEST_GetSwocInfo, /* __u8 request */ + USB_TYPE_VENDOR | USB_DIR_IN, /* __u8 request type */ + 0, /* __u16 value */ + 0, /* __u16 index */ + (void *) swocInfo, /* void *data */ + sizeof(struct swoc_info), /* __u16 size */ + USB_CTRL_SET_TIMEOUT); /* int timeout */ + + swocInfo->LinuxSKU = le16_to_cpu(swocInfo->LinuxSKU); + swocInfo->LinuxVer = le16_to_cpu(swocInfo->LinuxVer); + return result; +} + +static void debug_swoc(const struct device *dev, struct swoc_info *swocInfo) +{ + dev_dbg(dev, "SWIMS: SWoC Rev: %02d\n", swocInfo->rev); + dev_dbg(dev, "SWIMS: Linux SKU: %04X\n", swocInfo->LinuxSKU); + dev_dbg(dev, "SWIMS: Linux Version: %04X\n", swocInfo->LinuxVer); +} + + +static ssize_t show_truinst(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct swoc_info *swocInfo; + struct usb_interface *intf = to_usb_interface(dev); + struct usb_device *udev = interface_to_usbdev(intf); + int result; + if (swi_tru_install == TRU_FORCE_MS) { + result = snprintf(buf, PAGE_SIZE, "Forced Mass Storage\n"); + } else { + swocInfo = kmalloc(sizeof(struct swoc_info), GFP_KERNEL); + if (!swocInfo) { + snprintf(buf, PAGE_SIZE, "Error\n"); + return -ENOMEM; + } + result = sierra_get_swoc_info(udev, swocInfo); + if (result < 0) { + dev_dbg(dev, "SWIMS: failed SWoC query\n"); + kfree(swocInfo); + snprintf(buf, PAGE_SIZE, "Error\n"); + return -EIO; + } + debug_swoc(dev, swocInfo); + result = snprintf(buf, PAGE_SIZE, + "REV=%02d SKU=%04X VER=%04X\n", + swocInfo->rev, + swocInfo->LinuxSKU, + swocInfo->LinuxVer); + kfree(swocInfo); + } + return result; +} +static DEVICE_ATTR(truinst, S_IRUGO, show_truinst, NULL); + +int sierra_ms_init(struct us_data *us) +{ + int result, retries; + struct swoc_info *swocInfo; + struct usb_device *udev; + struct Scsi_Host *sh; + + retries = 3; + result = 0; + udev = us->pusb_dev; + + sh = us_to_host(us); + scsi_get_host_dev(sh); + + /* Force Modem mode */ + if (swi_tru_install == TRU_FORCE_MODEM) { + usb_stor_dbg(us, "SWIMS: Forcing Modem Mode\n"); + result = sierra_set_ms_mode(udev, SWIMS_SET_MODE_Modem); + if (result < 0) + usb_stor_dbg(us, "SWIMS: Failed to switch to modem mode\n"); + return -EIO; + } + /* Force Mass Storage mode (keep CD-Rom) */ + else if (swi_tru_install == TRU_FORCE_MS) { + usb_stor_dbg(us, "SWIMS: Forcing Mass Storage Mode\n"); + goto complete; + } + /* Normal TRU-Install Logic */ + else { + usb_stor_dbg(us, "SWIMS: Normal SWoC Logic\n"); + + swocInfo = kmalloc(sizeof(struct swoc_info), + GFP_KERNEL); + if (!swocInfo) + return -ENOMEM; + + retries = 3; + do { + retries--; + result = sierra_get_swoc_info(udev, swocInfo); + if (result < 0) { + usb_stor_dbg(us, "SWIMS: Failed SWoC query\n"); + schedule_timeout_uninterruptible(2*HZ); + } + } while (retries && result < 0); + + if (result < 0) { + usb_stor_dbg(us, "SWIMS: Completely failed SWoC query\n"); + kfree(swocInfo); + return -EIO; + } + + debug_swoc(&us->pusb_dev->dev, swocInfo); + + /* If there is not Linux software on the TRU-Install device + * then switch to modem mode + */ + if (!containsFullLinuxPackage(swocInfo)) { + usb_stor_dbg(us, "SWIMS: Switching to Modem Mode\n"); + result = sierra_set_ms_mode(udev, + SWIMS_SET_MODE_Modem); + if (result < 0) + usb_stor_dbg(us, "SWIMS: Failed to switch modem\n"); + kfree(swocInfo); + return -EIO; + } + kfree(swocInfo); + } +complete: + result = device_create_file(&us->pusb_intf->dev, &dev_attr_truinst); + + return 0; +} + diff --git a/kernel/drivers/usb/storage/sierra_ms.h b/kernel/drivers/usb/storage/sierra_ms.h new file mode 100644 index 000000000..bb48634ac --- /dev/null +++ b/kernel/drivers/usb/storage/sierra_ms.h @@ -0,0 +1,4 @@ +#ifndef _SIERRA_MS_H_ +#define _SIERRA_MS_H_ +extern int sierra_ms_init(struct us_data *us); +#endif diff --git a/kernel/drivers/usb/storage/transport.c b/kernel/drivers/usb/storage/transport.c new file mode 100644 index 000000000..540add24a --- /dev/null +++ b/kernel/drivers/usb/storage/transport.c @@ -0,0 +1,1385 @@ +/* Driver for USB Mass Storage compliant devices + * + * Current development and maintenance by: + * (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net) + * + * Developed with the assistance of: + * (c) 2000 David L. Brown, Jr. (usb-storage@davidb.org) + * (c) 2000 Stephen J. Gowdy (SGowdy@lbl.gov) + * (c) 2002 Alan Stern <stern@rowland.org> + * + * Initial work by: + * (c) 1999 Michael Gee (michael@linuxspecific.com) + * + * This driver is based on the 'USB Mass Storage Class' document. This + * describes in detail the protocol used to communicate with such + * devices. Clearly, the designers had SCSI and ATAPI commands in + * mind when they created this document. The commands are all very + * similar to commands in the SCSI-II and ATAPI specifications. + * + * It is important to note that in a number of cases this class + * exhibits class-specific exemptions from the USB specification. + * Notably the usage of NAK, STALL and ACK differs from the norm, in + * that they are used to communicate wait, failed and OK on commands. + * + * Also, for certain devices, the interrupt endpoint is used to convey + * status of a command. + * + * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more + * information about this driver. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/sched.h> +#include <linux/gfp.h> +#include <linux/errno.h> +#include <linux/export.h> + +#include <linux/usb/quirks.h> + +#include <scsi/scsi.h> +#include <scsi/scsi_eh.h> +#include <scsi/scsi_device.h> + +#include "usb.h" +#include "transport.h" +#include "protocol.h" +#include "scsiglue.h" +#include "debug.h" + +#include <linux/blkdev.h> +#include "../../scsi/sd.h" + + +/*********************************************************************** + * Data transfer routines + ***********************************************************************/ + +/* + * This is subtle, so pay attention: + * --------------------------------- + * We're very concerned about races with a command abort. Hanging this code + * is a sure fire way to hang the kernel. (Note that this discussion applies + * only to transactions resulting from a scsi queued-command, since only + * these transactions are subject to a scsi abort. Other transactions, such + * as those occurring during device-specific initialization, must be handled + * by a separate code path.) + * + * The abort function (usb_storage_command_abort() in scsiglue.c) first + * sets the machine state and the ABORTING bit in us->dflags to prevent + * new URBs from being submitted. It then calls usb_stor_stop_transport() + * below, which atomically tests-and-clears the URB_ACTIVE bit in us->dflags + * to see if the current_urb needs to be stopped. Likewise, the SG_ACTIVE + * bit is tested to see if the current_sg scatter-gather request needs to be + * stopped. The timeout callback routine does much the same thing. + * + * When a disconnect occurs, the DISCONNECTING bit in us->dflags is set to + * prevent new URBs from being submitted, and usb_stor_stop_transport() is + * called to stop any ongoing requests. + * + * The submit function first verifies that the submitting is allowed + * (neither ABORTING nor DISCONNECTING bits are set) and that the submit + * completes without errors, and only then sets the URB_ACTIVE bit. This + * prevents the stop_transport() function from trying to cancel the URB + * while the submit call is underway. Next, the submit function must test + * the flags to see if an abort or disconnect occurred during the submission + * or before the URB_ACTIVE bit was set. If so, it's essential to cancel + * the URB if it hasn't been cancelled already (i.e., if the URB_ACTIVE bit + * is still set). Either way, the function must then wait for the URB to + * finish. Note that the URB can still be in progress even after a call to + * usb_unlink_urb() returns. + * + * The idea is that (1) once the ABORTING or DISCONNECTING bit is set, + * either the stop_transport() function or the submitting function + * is guaranteed to call usb_unlink_urb() for an active URB, + * and (2) test_and_clear_bit() prevents usb_unlink_urb() from being + * called more than once or from being called during usb_submit_urb(). + */ + +/* This is the completion handler which will wake us up when an URB + * completes. + */ +static void usb_stor_blocking_completion(struct urb *urb) +{ + struct completion *urb_done_ptr = urb->context; + + complete(urb_done_ptr); +} + +/* This is the common part of the URB message submission code + * + * All URBs from the usb-storage driver involved in handling a queued scsi + * command _must_ pass through this function (or something like it) for the + * abort mechanisms to work properly. + */ +static int usb_stor_msg_common(struct us_data *us, int timeout) +{ + struct completion urb_done; + long timeleft; + int status; + + /* don't submit URBs during abort processing */ + if (test_bit(US_FLIDX_ABORTING, &us->dflags)) + return -EIO; + + /* set up data structures for the wakeup system */ + init_completion(&urb_done); + + /* fill the common fields in the URB */ + us->current_urb->context = &urb_done; + us->current_urb->transfer_flags = 0; + + /* we assume that if transfer_buffer isn't us->iobuf then it + * hasn't been mapped for DMA. Yes, this is clunky, but it's + * easier than always having the caller tell us whether the + * transfer buffer has already been mapped. */ + if (us->current_urb->transfer_buffer == us->iobuf) + us->current_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + us->current_urb->transfer_dma = us->iobuf_dma; + + /* submit the URB */ + status = usb_submit_urb(us->current_urb, GFP_NOIO); + if (status) { + /* something went wrong */ + return status; + } + + /* since the URB has been submitted successfully, it's now okay + * to cancel it */ + set_bit(US_FLIDX_URB_ACTIVE, &us->dflags); + + /* did an abort occur during the submission? */ + if (test_bit(US_FLIDX_ABORTING, &us->dflags)) { + + /* cancel the URB, if it hasn't been cancelled already */ + if (test_and_clear_bit(US_FLIDX_URB_ACTIVE, &us->dflags)) { + usb_stor_dbg(us, "-- cancelling URB\n"); + usb_unlink_urb(us->current_urb); + } + } + + /* wait for the completion of the URB */ + timeleft = wait_for_completion_interruptible_timeout( + &urb_done, timeout ? : MAX_SCHEDULE_TIMEOUT); + + clear_bit(US_FLIDX_URB_ACTIVE, &us->dflags); + + if (timeleft <= 0) { + usb_stor_dbg(us, "%s -- cancelling URB\n", + timeleft == 0 ? "Timeout" : "Signal"); + usb_kill_urb(us->current_urb); + } + + /* return the URB status */ + return us->current_urb->status; +} + +/* + * Transfer one control message, with timeouts, and allowing early + * termination. Return codes are usual -Exxx, *not* USB_STOR_XFER_xxx. + */ +int usb_stor_control_msg(struct us_data *us, unsigned int pipe, + u8 request, u8 requesttype, u16 value, u16 index, + void *data, u16 size, int timeout) +{ + int status; + + usb_stor_dbg(us, "rq=%02x rqtype=%02x value=%04x index=%02x len=%u\n", + request, requesttype, value, index, size); + + /* fill in the devrequest structure */ + us->cr->bRequestType = requesttype; + us->cr->bRequest = request; + us->cr->wValue = cpu_to_le16(value); + us->cr->wIndex = cpu_to_le16(index); + us->cr->wLength = cpu_to_le16(size); + + /* fill and submit the URB */ + usb_fill_control_urb(us->current_urb, us->pusb_dev, pipe, + (unsigned char*) us->cr, data, size, + usb_stor_blocking_completion, NULL); + status = usb_stor_msg_common(us, timeout); + + /* return the actual length of the data transferred if no error */ + if (status == 0) + status = us->current_urb->actual_length; + return status; +} +EXPORT_SYMBOL_GPL(usb_stor_control_msg); + +/* This is a version of usb_clear_halt() that allows early termination and + * doesn't read the status from the device -- this is because some devices + * crash their internal firmware when the status is requested after a halt. + * + * A definitive list of these 'bad' devices is too difficult to maintain or + * make complete enough to be useful. This problem was first observed on the + * Hagiwara FlashGate DUAL unit. However, bus traces reveal that neither + * MacOS nor Windows checks the status after clearing a halt. + * + * Since many vendors in this space limit their testing to interoperability + * with these two OSes, specification violations like this one are common. + */ +int usb_stor_clear_halt(struct us_data *us, unsigned int pipe) +{ + int result; + int endp = usb_pipeendpoint(pipe); + + if (usb_pipein (pipe)) + endp |= USB_DIR_IN; + + result = usb_stor_control_msg(us, us->send_ctrl_pipe, + USB_REQ_CLEAR_FEATURE, USB_RECIP_ENDPOINT, + USB_ENDPOINT_HALT, endp, + NULL, 0, 3*HZ); + + if (result >= 0) + usb_reset_endpoint(us->pusb_dev, endp); + + usb_stor_dbg(us, "result = %d\n", result); + return result; +} +EXPORT_SYMBOL_GPL(usb_stor_clear_halt); + + +/* + * Interpret the results of a URB transfer + * + * This function prints appropriate debugging messages, clears halts on + * non-control endpoints, and translates the status to the corresponding + * USB_STOR_XFER_xxx return code. + */ +static int interpret_urb_result(struct us_data *us, unsigned int pipe, + unsigned int length, int result, unsigned int partial) +{ + usb_stor_dbg(us, "Status code %d; transferred %u/%u\n", + result, partial, length); + switch (result) { + + /* no error code; did we send all the data? */ + case 0: + if (partial != length) { + usb_stor_dbg(us, "-- short transfer\n"); + return USB_STOR_XFER_SHORT; + } + + usb_stor_dbg(us, "-- transfer complete\n"); + return USB_STOR_XFER_GOOD; + + /* stalled */ + case -EPIPE: + /* for control endpoints, (used by CB[I]) a stall indicates + * a failed command */ + if (usb_pipecontrol(pipe)) { + usb_stor_dbg(us, "-- stall on control pipe\n"); + return USB_STOR_XFER_STALLED; + } + + /* for other sorts of endpoint, clear the stall */ + usb_stor_dbg(us, "clearing endpoint halt for pipe 0x%x\n", + pipe); + if (usb_stor_clear_halt(us, pipe) < 0) + return USB_STOR_XFER_ERROR; + return USB_STOR_XFER_STALLED; + + /* babble - the device tried to send more than we wanted to read */ + case -EOVERFLOW: + usb_stor_dbg(us, "-- babble\n"); + return USB_STOR_XFER_LONG; + + /* the transfer was cancelled by abort, disconnect, or timeout */ + case -ECONNRESET: + usb_stor_dbg(us, "-- transfer cancelled\n"); + return USB_STOR_XFER_ERROR; + + /* short scatter-gather read transfer */ + case -EREMOTEIO: + usb_stor_dbg(us, "-- short read transfer\n"); + return USB_STOR_XFER_SHORT; + + /* abort or disconnect in progress */ + case -EIO: + usb_stor_dbg(us, "-- abort or disconnect in progress\n"); + return USB_STOR_XFER_ERROR; + + /* the catch-all error case */ + default: + usb_stor_dbg(us, "-- unknown error\n"); + return USB_STOR_XFER_ERROR; + } +} + +/* + * Transfer one control message, without timeouts, but allowing early + * termination. Return codes are USB_STOR_XFER_xxx. + */ +int usb_stor_ctrl_transfer(struct us_data *us, unsigned int pipe, + u8 request, u8 requesttype, u16 value, u16 index, + void *data, u16 size) +{ + int result; + + usb_stor_dbg(us, "rq=%02x rqtype=%02x value=%04x index=%02x len=%u\n", + request, requesttype, value, index, size); + + /* fill in the devrequest structure */ + us->cr->bRequestType = requesttype; + us->cr->bRequest = request; + us->cr->wValue = cpu_to_le16(value); + us->cr->wIndex = cpu_to_le16(index); + us->cr->wLength = cpu_to_le16(size); + + /* fill and submit the URB */ + usb_fill_control_urb(us->current_urb, us->pusb_dev, pipe, + (unsigned char*) us->cr, data, size, + usb_stor_blocking_completion, NULL); + result = usb_stor_msg_common(us, 0); + + return interpret_urb_result(us, pipe, size, result, + us->current_urb->actual_length); +} +EXPORT_SYMBOL_GPL(usb_stor_ctrl_transfer); + +/* + * Receive one interrupt buffer, without timeouts, but allowing early + * termination. Return codes are USB_STOR_XFER_xxx. + * + * This routine always uses us->recv_intr_pipe as the pipe and + * us->ep_bInterval as the interrupt interval. + */ +static int usb_stor_intr_transfer(struct us_data *us, void *buf, + unsigned int length) +{ + int result; + unsigned int pipe = us->recv_intr_pipe; + unsigned int maxp; + + usb_stor_dbg(us, "xfer %u bytes\n", length); + + /* calculate the max packet size */ + maxp = usb_maxpacket(us->pusb_dev, pipe, usb_pipeout(pipe)); + if (maxp > length) + maxp = length; + + /* fill and submit the URB */ + usb_fill_int_urb(us->current_urb, us->pusb_dev, pipe, buf, + maxp, usb_stor_blocking_completion, NULL, + us->ep_bInterval); + result = usb_stor_msg_common(us, 0); + + return interpret_urb_result(us, pipe, length, result, + us->current_urb->actual_length); +} + +/* + * Transfer one buffer via bulk pipe, without timeouts, but allowing early + * termination. Return codes are USB_STOR_XFER_xxx. If the bulk pipe + * stalls during the transfer, the halt is automatically cleared. + */ +int usb_stor_bulk_transfer_buf(struct us_data *us, unsigned int pipe, + void *buf, unsigned int length, unsigned int *act_len) +{ + int result; + + usb_stor_dbg(us, "xfer %u bytes\n", length); + + /* fill and submit the URB */ + usb_fill_bulk_urb(us->current_urb, us->pusb_dev, pipe, buf, length, + usb_stor_blocking_completion, NULL); + result = usb_stor_msg_common(us, 0); + + /* store the actual length of the data transferred */ + if (act_len) + *act_len = us->current_urb->actual_length; + return interpret_urb_result(us, pipe, length, result, + us->current_urb->actual_length); +} +EXPORT_SYMBOL_GPL(usb_stor_bulk_transfer_buf); + +/* + * Transfer a scatter-gather list via bulk transfer + * + * This function does basically the same thing as usb_stor_bulk_transfer_buf() + * above, but it uses the usbcore scatter-gather library. + */ +static int usb_stor_bulk_transfer_sglist(struct us_data *us, unsigned int pipe, + struct scatterlist *sg, int num_sg, unsigned int length, + unsigned int *act_len) +{ + int result; + + /* don't submit s-g requests during abort processing */ + if (test_bit(US_FLIDX_ABORTING, &us->dflags)) + return USB_STOR_XFER_ERROR; + + /* initialize the scatter-gather request block */ + usb_stor_dbg(us, "xfer %u bytes, %d entries\n", length, num_sg); + result = usb_sg_init(&us->current_sg, us->pusb_dev, pipe, 0, + sg, num_sg, length, GFP_NOIO); + if (result) { + usb_stor_dbg(us, "usb_sg_init returned %d\n", result); + return USB_STOR_XFER_ERROR; + } + + /* since the block has been initialized successfully, it's now + * okay to cancel it */ + set_bit(US_FLIDX_SG_ACTIVE, &us->dflags); + + /* did an abort occur during the submission? */ + if (test_bit(US_FLIDX_ABORTING, &us->dflags)) { + + /* cancel the request, if it hasn't been cancelled already */ + if (test_and_clear_bit(US_FLIDX_SG_ACTIVE, &us->dflags)) { + usb_stor_dbg(us, "-- cancelling sg request\n"); + usb_sg_cancel(&us->current_sg); + } + } + + /* wait for the completion of the transfer */ + usb_sg_wait(&us->current_sg); + clear_bit(US_FLIDX_SG_ACTIVE, &us->dflags); + + result = us->current_sg.status; + if (act_len) + *act_len = us->current_sg.bytes; + return interpret_urb_result(us, pipe, length, result, + us->current_sg.bytes); +} + +/* + * Common used function. Transfer a complete command + * via usb_stor_bulk_transfer_sglist() above. Set cmnd resid + */ +int usb_stor_bulk_srb(struct us_data* us, unsigned int pipe, + struct scsi_cmnd* srb) +{ + unsigned int partial; + int result = usb_stor_bulk_transfer_sglist(us, pipe, scsi_sglist(srb), + scsi_sg_count(srb), scsi_bufflen(srb), + &partial); + + scsi_set_resid(srb, scsi_bufflen(srb) - partial); + return result; +} +EXPORT_SYMBOL_GPL(usb_stor_bulk_srb); + +/* + * Transfer an entire SCSI command's worth of data payload over the bulk + * pipe. + * + * Note that this uses usb_stor_bulk_transfer_buf() and + * usb_stor_bulk_transfer_sglist() to achieve its goals -- + * this function simply determines whether we're going to use + * scatter-gather or not, and acts appropriately. + */ +int usb_stor_bulk_transfer_sg(struct us_data* us, unsigned int pipe, + void *buf, unsigned int length_left, int use_sg, int *residual) +{ + int result; + unsigned int partial; + + /* are we scatter-gathering? */ + if (use_sg) { + /* use the usb core scatter-gather primitives */ + result = usb_stor_bulk_transfer_sglist(us, pipe, + (struct scatterlist *) buf, use_sg, + length_left, &partial); + length_left -= partial; + } else { + /* no scatter-gather, just make the request */ + result = usb_stor_bulk_transfer_buf(us, pipe, buf, + length_left, &partial); + length_left -= partial; + } + + /* store the residual and return the error code */ + if (residual) + *residual = length_left; + return result; +} +EXPORT_SYMBOL_GPL(usb_stor_bulk_transfer_sg); + +/*********************************************************************** + * Transport routines + ***********************************************************************/ + +/* There are so many devices that report the capacity incorrectly, + * this routine was written to counteract some of the resulting + * problems. + */ +static void last_sector_hacks(struct us_data *us, struct scsi_cmnd *srb) +{ + struct gendisk *disk; + struct scsi_disk *sdkp; + u32 sector; + + /* To Report "Medium Error: Record Not Found */ + static unsigned char record_not_found[18] = { + [0] = 0x70, /* current error */ + [2] = MEDIUM_ERROR, /* = 0x03 */ + [7] = 0x0a, /* additional length */ + [12] = 0x14 /* Record Not Found */ + }; + + /* If last-sector problems can't occur, whether because the + * capacity was already decremented or because the device is + * known to report the correct capacity, then we don't need + * to do anything. + */ + if (!us->use_last_sector_hacks) + return; + + /* Was this command a READ(10) or a WRITE(10)? */ + if (srb->cmnd[0] != READ_10 && srb->cmnd[0] != WRITE_10) + goto done; + + /* Did this command access the last sector? */ + sector = (srb->cmnd[2] << 24) | (srb->cmnd[3] << 16) | + (srb->cmnd[4] << 8) | (srb->cmnd[5]); + disk = srb->request->rq_disk; + if (!disk) + goto done; + sdkp = scsi_disk(disk); + if (!sdkp) + goto done; + if (sector + 1 != sdkp->capacity) + goto done; + + if (srb->result == SAM_STAT_GOOD && scsi_get_resid(srb) == 0) { + + /* The command succeeded. We know this device doesn't + * have the last-sector bug, so stop checking it. + */ + us->use_last_sector_hacks = 0; + + } else { + /* The command failed. Allow up to 3 retries in case this + * is some normal sort of failure. After that, assume the + * capacity is wrong and we're trying to access the sector + * beyond the end. Replace the result code and sense data + * with values that will cause the SCSI core to fail the + * command immediately, instead of going into an infinite + * (or even just a very long) retry loop. + */ + if (++us->last_sector_retries < 3) + return; + srb->result = SAM_STAT_CHECK_CONDITION; + memcpy(srb->sense_buffer, record_not_found, + sizeof(record_not_found)); + } + + done: + /* Don't reset the retry counter for TEST UNIT READY commands, + * because they get issued after device resets which might be + * caused by a failed last-sector access. + */ + if (srb->cmnd[0] != TEST_UNIT_READY) + us->last_sector_retries = 0; +} + +/* Invoke the transport and basic error-handling/recovery methods + * + * This is used by the protocol layers to actually send the message to + * the device and receive the response. + */ +void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us) +{ + int need_auto_sense; + int result; + + /* send the command to the transport layer */ + scsi_set_resid(srb, 0); + result = us->transport(srb, us); + + /* if the command gets aborted by the higher layers, we need to + * short-circuit all other processing + */ + if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) { + usb_stor_dbg(us, "-- command was aborted\n"); + srb->result = DID_ABORT << 16; + goto Handle_Errors; + } + + /* if there is a transport error, reset and don't auto-sense */ + if (result == USB_STOR_TRANSPORT_ERROR) { + usb_stor_dbg(us, "-- transport indicates error, resetting\n"); + srb->result = DID_ERROR << 16; + goto Handle_Errors; + } + + /* if the transport provided its own sense data, don't auto-sense */ + if (result == USB_STOR_TRANSPORT_NO_SENSE) { + srb->result = SAM_STAT_CHECK_CONDITION; + last_sector_hacks(us, srb); + return; + } + + srb->result = SAM_STAT_GOOD; + + /* Determine if we need to auto-sense + * + * I normally don't use a flag like this, but it's almost impossible + * to understand what's going on here if I don't. + */ + need_auto_sense = 0; + + /* + * If we're running the CB transport, which is incapable + * of determining status on its own, we will auto-sense + * unless the operation involved a data-in transfer. Devices + * can signal most data-in errors by stalling the bulk-in pipe. + */ + if ((us->protocol == USB_PR_CB || us->protocol == USB_PR_DPCM_USB) && + srb->sc_data_direction != DMA_FROM_DEVICE) { + usb_stor_dbg(us, "-- CB transport device requiring auto-sense\n"); + need_auto_sense = 1; + } + + /* + * If we have a failure, we're going to do a REQUEST_SENSE + * automatically. Note that we differentiate between a command + * "failure" and an "error" in the transport mechanism. + */ + if (result == USB_STOR_TRANSPORT_FAILED) { + usb_stor_dbg(us, "-- transport indicates command failure\n"); + need_auto_sense = 1; + } + + /* + * Determine if this device is SAT by seeing if the + * command executed successfully. Otherwise we'll have + * to wait for at least one CHECK_CONDITION to determine + * SANE_SENSE support + */ + if (unlikely((srb->cmnd[0] == ATA_16 || srb->cmnd[0] == ATA_12) && + result == USB_STOR_TRANSPORT_GOOD && + !(us->fflags & US_FL_SANE_SENSE) && + !(us->fflags & US_FL_BAD_SENSE) && + !(srb->cmnd[2] & 0x20))) { + usb_stor_dbg(us, "-- SAT supported, increasing auto-sense\n"); + us->fflags |= US_FL_SANE_SENSE; + } + + /* + * A short transfer on a command where we don't expect it + * is unusual, but it doesn't mean we need to auto-sense. + */ + if ((scsi_get_resid(srb) > 0) && + !((srb->cmnd[0] == REQUEST_SENSE) || + (srb->cmnd[0] == INQUIRY) || + (srb->cmnd[0] == MODE_SENSE) || + (srb->cmnd[0] == LOG_SENSE) || + (srb->cmnd[0] == MODE_SENSE_10))) { + usb_stor_dbg(us, "-- unexpectedly short transfer\n"); + } + + /* Now, if we need to do the auto-sense, let's do it */ + if (need_auto_sense) { + int temp_result; + struct scsi_eh_save ses; + int sense_size = US_SENSE_SIZE; + struct scsi_sense_hdr sshdr; + const u8 *scdd; + u8 fm_ili; + + /* device supports and needs bigger sense buffer */ + if (us->fflags & US_FL_SANE_SENSE) + sense_size = ~0; +Retry_Sense: + usb_stor_dbg(us, "Issuing auto-REQUEST_SENSE\n"); + + scsi_eh_prep_cmnd(srb, &ses, NULL, 0, sense_size); + + /* FIXME: we must do the protocol translation here */ + if (us->subclass == USB_SC_RBC || us->subclass == USB_SC_SCSI || + us->subclass == USB_SC_CYP_ATACB) + srb->cmd_len = 6; + else + srb->cmd_len = 12; + + /* issue the auto-sense command */ + scsi_set_resid(srb, 0); + temp_result = us->transport(us->srb, us); + + /* let's clean up right away */ + scsi_eh_restore_cmnd(srb, &ses); + + if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) { + usb_stor_dbg(us, "-- auto-sense aborted\n"); + srb->result = DID_ABORT << 16; + + /* If SANE_SENSE caused this problem, disable it */ + if (sense_size != US_SENSE_SIZE) { + us->fflags &= ~US_FL_SANE_SENSE; + us->fflags |= US_FL_BAD_SENSE; + } + goto Handle_Errors; + } + + /* Some devices claim to support larger sense but fail when + * trying to request it. When a transport failure happens + * using US_FS_SANE_SENSE, we always retry with a standard + * (small) sense request. This fixes some USB GSM modems + */ + if (temp_result == USB_STOR_TRANSPORT_FAILED && + sense_size != US_SENSE_SIZE) { + usb_stor_dbg(us, "-- auto-sense failure, retry small sense\n"); + sense_size = US_SENSE_SIZE; + us->fflags &= ~US_FL_SANE_SENSE; + us->fflags |= US_FL_BAD_SENSE; + goto Retry_Sense; + } + + /* Other failures */ + if (temp_result != USB_STOR_TRANSPORT_GOOD) { + usb_stor_dbg(us, "-- auto-sense failure\n"); + + /* we skip the reset if this happens to be a + * multi-target device, since failure of an + * auto-sense is perfectly valid + */ + srb->result = DID_ERROR << 16; + if (!(us->fflags & US_FL_SCM_MULT_TARG)) + goto Handle_Errors; + return; + } + + /* If the sense data returned is larger than 18-bytes then we + * assume this device supports requesting more in the future. + * The response code must be 70h through 73h inclusive. + */ + if (srb->sense_buffer[7] > (US_SENSE_SIZE - 8) && + !(us->fflags & US_FL_SANE_SENSE) && + !(us->fflags & US_FL_BAD_SENSE) && + (srb->sense_buffer[0] & 0x7C) == 0x70) { + usb_stor_dbg(us, "-- SANE_SENSE support enabled\n"); + us->fflags |= US_FL_SANE_SENSE; + + /* Indicate to the user that we truncated their sense + * because we didn't know it supported larger sense. + */ + usb_stor_dbg(us, "-- Sense data truncated to %i from %i\n", + US_SENSE_SIZE, + srb->sense_buffer[7] + 8); + srb->sense_buffer[7] = (US_SENSE_SIZE - 8); + } + + scsi_normalize_sense(srb->sense_buffer, SCSI_SENSE_BUFFERSIZE, + &sshdr); + + usb_stor_dbg(us, "-- Result from auto-sense is %d\n", + temp_result); + usb_stor_dbg(us, "-- code: 0x%x, key: 0x%x, ASC: 0x%x, ASCQ: 0x%x\n", + sshdr.response_code, sshdr.sense_key, + sshdr.asc, sshdr.ascq); +#ifdef CONFIG_USB_STORAGE_DEBUG + usb_stor_show_sense(us, sshdr.sense_key, sshdr.asc, sshdr.ascq); +#endif + + /* set the result so the higher layers expect this data */ + srb->result = SAM_STAT_CHECK_CONDITION; + + scdd = scsi_sense_desc_find(srb->sense_buffer, + SCSI_SENSE_BUFFERSIZE, 4); + fm_ili = (scdd ? scdd[3] : srb->sense_buffer[2]) & 0xA0; + + /* We often get empty sense data. This could indicate that + * everything worked or that there was an unspecified + * problem. We have to decide which. + */ + if (sshdr.sense_key == 0 && sshdr.asc == 0 && sshdr.ascq == 0 && + fm_ili == 0) { + /* If things are really okay, then let's show that. + * Zero out the sense buffer so the higher layers + * won't realize we did an unsolicited auto-sense. + */ + if (result == USB_STOR_TRANSPORT_GOOD) { + srb->result = SAM_STAT_GOOD; + srb->sense_buffer[0] = 0x0; + + /* If there was a problem, report an unspecified + * hardware error to prevent the higher layers from + * entering an infinite retry loop. + */ + } else { + srb->result = DID_ERROR << 16; + if ((sshdr.response_code & 0x72) == 0x72) + srb->sense_buffer[1] = HARDWARE_ERROR; + else + srb->sense_buffer[2] = HARDWARE_ERROR; + } + } + } + + /* + * Some devices don't work or return incorrect data the first + * time they get a READ(10) command, or for the first READ(10) + * after a media change. If the INITIAL_READ10 flag is set, + * keep track of whether READ(10) commands succeed. If the + * previous one succeeded and this one failed, set the REDO_READ10 + * flag to force a retry. + */ + if (unlikely((us->fflags & US_FL_INITIAL_READ10) && + srb->cmnd[0] == READ_10)) { + if (srb->result == SAM_STAT_GOOD) { + set_bit(US_FLIDX_READ10_WORKED, &us->dflags); + } else if (test_bit(US_FLIDX_READ10_WORKED, &us->dflags)) { + clear_bit(US_FLIDX_READ10_WORKED, &us->dflags); + set_bit(US_FLIDX_REDO_READ10, &us->dflags); + } + + /* + * Next, if the REDO_READ10 flag is set, return a result + * code that will cause the SCSI core to retry the READ(10) + * command immediately. + */ + if (test_bit(US_FLIDX_REDO_READ10, &us->dflags)) { + clear_bit(US_FLIDX_REDO_READ10, &us->dflags); + srb->result = DID_IMM_RETRY << 16; + srb->sense_buffer[0] = 0; + } + } + + /* Did we transfer less than the minimum amount required? */ + if ((srb->result == SAM_STAT_GOOD || srb->sense_buffer[2] == 0) && + scsi_bufflen(srb) - scsi_get_resid(srb) < srb->underflow) + srb->result = DID_ERROR << 16; + + last_sector_hacks(us, srb); + return; + + /* Error and abort processing: try to resynchronize with the device + * by issuing a port reset. If that fails, try a class-specific + * device reset. */ + Handle_Errors: + + /* Set the RESETTING bit, and clear the ABORTING bit so that + * the reset may proceed. */ + scsi_lock(us_to_host(us)); + set_bit(US_FLIDX_RESETTING, &us->dflags); + clear_bit(US_FLIDX_ABORTING, &us->dflags); + scsi_unlock(us_to_host(us)); + + /* We must release the device lock because the pre_reset routine + * will want to acquire it. */ + mutex_unlock(&us->dev_mutex); + result = usb_stor_port_reset(us); + mutex_lock(&us->dev_mutex); + + if (result < 0) { + scsi_lock(us_to_host(us)); + usb_stor_report_device_reset(us); + scsi_unlock(us_to_host(us)); + us->transport_reset(us); + } + clear_bit(US_FLIDX_RESETTING, &us->dflags); + last_sector_hacks(us, srb); +} + +/* Stop the current URB transfer */ +void usb_stor_stop_transport(struct us_data *us) +{ + /* If the state machine is blocked waiting for an URB, + * let's wake it up. The test_and_clear_bit() call + * guarantees that if a URB has just been submitted, + * it won't be cancelled more than once. */ + if (test_and_clear_bit(US_FLIDX_URB_ACTIVE, &us->dflags)) { + usb_stor_dbg(us, "-- cancelling URB\n"); + usb_unlink_urb(us->current_urb); + } + + /* If we are waiting for a scatter-gather operation, cancel it. */ + if (test_and_clear_bit(US_FLIDX_SG_ACTIVE, &us->dflags)) { + usb_stor_dbg(us, "-- cancelling sg request\n"); + usb_sg_cancel(&us->current_sg); + } +} + +/* + * Control/Bulk and Control/Bulk/Interrupt transport + */ + +int usb_stor_CB_transport(struct scsi_cmnd *srb, struct us_data *us) +{ + unsigned int transfer_length = scsi_bufflen(srb); + unsigned int pipe = 0; + int result; + + /* COMMAND STAGE */ + /* let's send the command via the control pipe */ + result = usb_stor_ctrl_transfer(us, us->send_ctrl_pipe, + US_CBI_ADSC, + USB_TYPE_CLASS | USB_RECIP_INTERFACE, 0, + us->ifnum, srb->cmnd, srb->cmd_len); + + /* check the return code for the command */ + usb_stor_dbg(us, "Call to usb_stor_ctrl_transfer() returned %d\n", + result); + + /* if we stalled the command, it means command failed */ + if (result == USB_STOR_XFER_STALLED) { + return USB_STOR_TRANSPORT_FAILED; + } + + /* Uh oh... serious problem here */ + if (result != USB_STOR_XFER_GOOD) { + return USB_STOR_TRANSPORT_ERROR; + } + + /* DATA STAGE */ + /* transfer the data payload for this command, if one exists*/ + if (transfer_length) { + pipe = srb->sc_data_direction == DMA_FROM_DEVICE ? + us->recv_bulk_pipe : us->send_bulk_pipe; + result = usb_stor_bulk_srb(us, pipe, srb); + usb_stor_dbg(us, "CBI data stage result is 0x%x\n", result); + + /* if we stalled the data transfer it means command failed */ + if (result == USB_STOR_XFER_STALLED) + return USB_STOR_TRANSPORT_FAILED; + if (result > USB_STOR_XFER_STALLED) + return USB_STOR_TRANSPORT_ERROR; + } + + /* STATUS STAGE */ + + /* NOTE: CB does not have a status stage. Silly, I know. So + * we have to catch this at a higher level. + */ + if (us->protocol != USB_PR_CBI) + return USB_STOR_TRANSPORT_GOOD; + + result = usb_stor_intr_transfer(us, us->iobuf, 2); + usb_stor_dbg(us, "Got interrupt data (0x%x, 0x%x)\n", + us->iobuf[0], us->iobuf[1]); + if (result != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + /* UFI gives us ASC and ASCQ, like a request sense + * + * REQUEST_SENSE and INQUIRY don't affect the sense data on UFI + * devices, so we ignore the information for those commands. Note + * that this means we could be ignoring a real error on these + * commands, but that can't be helped. + */ + if (us->subclass == USB_SC_UFI) { + if (srb->cmnd[0] == REQUEST_SENSE || + srb->cmnd[0] == INQUIRY) + return USB_STOR_TRANSPORT_GOOD; + if (us->iobuf[0]) + goto Failed; + return USB_STOR_TRANSPORT_GOOD; + } + + /* If not UFI, we interpret the data as a result code + * The first byte should always be a 0x0. + * + * Some bogus devices don't follow that rule. They stuff the ASC + * into the first byte -- so if it's non-zero, call it a failure. + */ + if (us->iobuf[0]) { + usb_stor_dbg(us, "CBI IRQ data showed reserved bType 0x%x\n", + us->iobuf[0]); + goto Failed; + + } + + /* The second byte & 0x0F should be 0x0 for good, otherwise error */ + switch (us->iobuf[1] & 0x0F) { + case 0x00: + return USB_STOR_TRANSPORT_GOOD; + case 0x01: + goto Failed; + } + return USB_STOR_TRANSPORT_ERROR; + + /* the CBI spec requires that the bulk pipe must be cleared + * following any data-in/out command failure (section 2.4.3.1.3) + */ + Failed: + if (pipe) + usb_stor_clear_halt(us, pipe); + return USB_STOR_TRANSPORT_FAILED; +} +EXPORT_SYMBOL_GPL(usb_stor_CB_transport); + +/* + * Bulk only transport + */ + +/* Determine what the maximum LUN supported is */ +int usb_stor_Bulk_max_lun(struct us_data *us) +{ + int result; + + /* issue the command */ + us->iobuf[0] = 0; + result = usb_stor_control_msg(us, us->recv_ctrl_pipe, + US_BULK_GET_MAX_LUN, + USB_DIR_IN | USB_TYPE_CLASS | + USB_RECIP_INTERFACE, + 0, us->ifnum, us->iobuf, 1, 10*HZ); + + usb_stor_dbg(us, "GetMaxLUN command result is %d, data is %d\n", + result, us->iobuf[0]); + + /* + * If we have a successful request, return the result if valid. The + * CBW LUN field is 4 bits wide, so the value reported by the device + * should fit into that. + */ + if (result > 0) { + if (us->iobuf[0] < 16) { + return us->iobuf[0]; + } else { + dev_info(&us->pusb_intf->dev, + "Max LUN %d is not valid, using 0 instead", + us->iobuf[0]); + } + } + + /* + * Some devices don't like GetMaxLUN. They may STALL the control + * pipe, they may return a zero-length result, they may do nothing at + * all and timeout, or they may fail in even more bizarrely creative + * ways. In these cases the best approach is to use the default + * value: only one LUN. + */ + return 0; +} + +int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us) +{ + struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf; + struct bulk_cs_wrap *bcs = (struct bulk_cs_wrap *) us->iobuf; + unsigned int transfer_length = scsi_bufflen(srb); + unsigned int residue; + int result; + int fake_sense = 0; + unsigned int cswlen; + unsigned int cbwlen = US_BULK_CB_WRAP_LEN; + + /* Take care of BULK32 devices; set extra byte to 0 */ + if (unlikely(us->fflags & US_FL_BULK32)) { + cbwlen = 32; + us->iobuf[31] = 0; + } + + /* set up the command wrapper */ + bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN); + bcb->DataTransferLength = cpu_to_le32(transfer_length); + bcb->Flags = srb->sc_data_direction == DMA_FROM_DEVICE ? + US_BULK_FLAG_IN : 0; + bcb->Tag = ++us->tag; + bcb->Lun = srb->device->lun; + if (us->fflags & US_FL_SCM_MULT_TARG) + bcb->Lun |= srb->device->id << 4; + bcb->Length = srb->cmd_len; + + /* copy the command payload */ + memset(bcb->CDB, 0, sizeof(bcb->CDB)); + memcpy(bcb->CDB, srb->cmnd, bcb->Length); + + /* send it to out endpoint */ + usb_stor_dbg(us, "Bulk Command S 0x%x T 0x%x L %d F %d Trg %d LUN %d CL %d\n", + le32_to_cpu(bcb->Signature), bcb->Tag, + le32_to_cpu(bcb->DataTransferLength), bcb->Flags, + (bcb->Lun >> 4), (bcb->Lun & 0x0F), + bcb->Length); + result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, + bcb, cbwlen, NULL); + usb_stor_dbg(us, "Bulk command transfer result=%d\n", result); + if (result != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + /* DATA STAGE */ + /* send/receive data payload, if there is any */ + + /* Some USB-IDE converter chips need a 100us delay between the + * command phase and the data phase. Some devices need a little + * more than that, probably because of clock rate inaccuracies. */ + if (unlikely(us->fflags & US_FL_GO_SLOW)) + udelay(125); + + if (transfer_length) { + unsigned int pipe = srb->sc_data_direction == DMA_FROM_DEVICE ? + us->recv_bulk_pipe : us->send_bulk_pipe; + result = usb_stor_bulk_srb(us, pipe, srb); + usb_stor_dbg(us, "Bulk data transfer result 0x%x\n", result); + if (result == USB_STOR_XFER_ERROR) + return USB_STOR_TRANSPORT_ERROR; + + /* If the device tried to send back more data than the + * amount requested, the spec requires us to transfer + * the CSW anyway. Since there's no point retrying the + * the command, we'll return fake sense data indicating + * Illegal Request, Invalid Field in CDB. + */ + if (result == USB_STOR_XFER_LONG) + fake_sense = 1; + + /* + * Sometimes a device will mistakenly skip the data phase + * and go directly to the status phase without sending a + * zero-length packet. If we get a 13-byte response here, + * check whether it really is a CSW. + */ + if (result == USB_STOR_XFER_SHORT && + srb->sc_data_direction == DMA_FROM_DEVICE && + transfer_length - scsi_get_resid(srb) == + US_BULK_CS_WRAP_LEN) { + struct scatterlist *sg = NULL; + unsigned int offset = 0; + + if (usb_stor_access_xfer_buf((unsigned char *) bcs, + US_BULK_CS_WRAP_LEN, srb, &sg, + &offset, FROM_XFER_BUF) == + US_BULK_CS_WRAP_LEN && + bcs->Signature == + cpu_to_le32(US_BULK_CS_SIGN)) { + usb_stor_dbg(us, "Device skipped data phase\n"); + scsi_set_resid(srb, transfer_length); + goto skipped_data_phase; + } + } + } + + /* See flow chart on pg 15 of the Bulk Only Transport spec for + * an explanation of how this code works. + */ + + /* get CSW for device status */ + usb_stor_dbg(us, "Attempting to get CSW...\n"); + result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, + bcs, US_BULK_CS_WRAP_LEN, &cswlen); + + /* Some broken devices add unnecessary zero-length packets to the + * end of their data transfers. Such packets show up as 0-length + * CSWs. If we encounter such a thing, try to read the CSW again. + */ + if (result == USB_STOR_XFER_SHORT && cswlen == 0) { + usb_stor_dbg(us, "Received 0-length CSW; retrying...\n"); + result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, + bcs, US_BULK_CS_WRAP_LEN, &cswlen); + } + + /* did the attempt to read the CSW fail? */ + if (result == USB_STOR_XFER_STALLED) { + + /* get the status again */ + usb_stor_dbg(us, "Attempting to get CSW (2nd try)...\n"); + result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, + bcs, US_BULK_CS_WRAP_LEN, NULL); + } + + /* if we still have a failure at this point, we're in trouble */ + usb_stor_dbg(us, "Bulk status result = %d\n", result); + if (result != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + skipped_data_phase: + /* check bulk status */ + residue = le32_to_cpu(bcs->Residue); + usb_stor_dbg(us, "Bulk Status S 0x%x T 0x%x R %u Stat 0x%x\n", + le32_to_cpu(bcs->Signature), bcs->Tag, + residue, bcs->Status); + if (!(bcs->Tag == us->tag || (us->fflags & US_FL_BULK_IGNORE_TAG)) || + bcs->Status > US_BULK_STAT_PHASE) { + usb_stor_dbg(us, "Bulk logical error\n"); + return USB_STOR_TRANSPORT_ERROR; + } + + /* Some broken devices report odd signatures, so we do not check them + * for validity against the spec. We store the first one we see, + * and check subsequent transfers for validity against this signature. + */ + if (!us->bcs_signature) { + us->bcs_signature = bcs->Signature; + if (us->bcs_signature != cpu_to_le32(US_BULK_CS_SIGN)) + usb_stor_dbg(us, "Learnt BCS signature 0x%08X\n", + le32_to_cpu(us->bcs_signature)); + } else if (bcs->Signature != us->bcs_signature) { + usb_stor_dbg(us, "Signature mismatch: got %08X, expecting %08X\n", + le32_to_cpu(bcs->Signature), + le32_to_cpu(us->bcs_signature)); + return USB_STOR_TRANSPORT_ERROR; + } + + /* try to compute the actual residue, based on how much data + * was really transferred and what the device tells us */ + if (residue && !(us->fflags & US_FL_IGNORE_RESIDUE)) { + + /* Heuristically detect devices that generate bogus residues + * by seeing what happens with INQUIRY and READ CAPACITY + * commands. + */ + if (bcs->Status == US_BULK_STAT_OK && + scsi_get_resid(srb) == 0 && + ((srb->cmnd[0] == INQUIRY && + transfer_length == 36) || + (srb->cmnd[0] == READ_CAPACITY && + transfer_length == 8))) { + us->fflags |= US_FL_IGNORE_RESIDUE; + + } else { + residue = min(residue, transfer_length); + scsi_set_resid(srb, max(scsi_get_resid(srb), + (int) residue)); + } + } + + /* based on the status code, we report good or bad */ + switch (bcs->Status) { + case US_BULK_STAT_OK: + /* device babbled -- return fake sense data */ + if (fake_sense) { + memcpy(srb->sense_buffer, + usb_stor_sense_invalidCDB, + sizeof(usb_stor_sense_invalidCDB)); + return USB_STOR_TRANSPORT_NO_SENSE; + } + + /* command good -- note that data could be short */ + return USB_STOR_TRANSPORT_GOOD; + + case US_BULK_STAT_FAIL: + /* command failed */ + return USB_STOR_TRANSPORT_FAILED; + + case US_BULK_STAT_PHASE: + /* phase error -- note that a transport reset will be + * invoked by the invoke_transport() function + */ + return USB_STOR_TRANSPORT_ERROR; + } + + /* we should never get here, but if we do, we're in trouble */ + return USB_STOR_TRANSPORT_ERROR; +} +EXPORT_SYMBOL_GPL(usb_stor_Bulk_transport); + +/*********************************************************************** + * Reset routines + ***********************************************************************/ + +/* This is the common part of the device reset code. + * + * It's handy that every transport mechanism uses the control endpoint for + * resets. + * + * Basically, we send a reset with a 5-second timeout, so we don't get + * jammed attempting to do the reset. + */ +static int usb_stor_reset_common(struct us_data *us, + u8 request, u8 requesttype, + u16 value, u16 index, void *data, u16 size) +{ + int result; + int result2; + + if (test_bit(US_FLIDX_DISCONNECTING, &us->dflags)) { + usb_stor_dbg(us, "No reset during disconnect\n"); + return -EIO; + } + + result = usb_stor_control_msg(us, us->send_ctrl_pipe, + request, requesttype, value, index, data, size, + 5*HZ); + if (result < 0) { + usb_stor_dbg(us, "Soft reset failed: %d\n", result); + return result; + } + + /* Give the device some time to recover from the reset, + * but don't delay disconnect processing. */ + wait_event_interruptible_timeout(us->delay_wait, + test_bit(US_FLIDX_DISCONNECTING, &us->dflags), + HZ*6); + if (test_bit(US_FLIDX_DISCONNECTING, &us->dflags)) { + usb_stor_dbg(us, "Reset interrupted by disconnect\n"); + return -EIO; + } + + usb_stor_dbg(us, "Soft reset: clearing bulk-in endpoint halt\n"); + result = usb_stor_clear_halt(us, us->recv_bulk_pipe); + + usb_stor_dbg(us, "Soft reset: clearing bulk-out endpoint halt\n"); + result2 = usb_stor_clear_halt(us, us->send_bulk_pipe); + + /* return a result code based on the result of the clear-halts */ + if (result >= 0) + result = result2; + if (result < 0) + usb_stor_dbg(us, "Soft reset failed\n"); + else + usb_stor_dbg(us, "Soft reset done\n"); + return result; +} + +/* This issues a CB[I] Reset to the device in question + */ +#define CB_RESET_CMD_SIZE 12 + +int usb_stor_CB_reset(struct us_data *us) +{ + memset(us->iobuf, 0xFF, CB_RESET_CMD_SIZE); + us->iobuf[0] = SEND_DIAGNOSTIC; + us->iobuf[1] = 4; + return usb_stor_reset_common(us, US_CBI_ADSC, + USB_TYPE_CLASS | USB_RECIP_INTERFACE, + 0, us->ifnum, us->iobuf, CB_RESET_CMD_SIZE); +} +EXPORT_SYMBOL_GPL(usb_stor_CB_reset); + +/* This issues a Bulk-only Reset to the device in question, including + * clearing the subsequent endpoint halts that may occur. + */ +int usb_stor_Bulk_reset(struct us_data *us) +{ + return usb_stor_reset_common(us, US_BULK_RESET_REQUEST, + USB_TYPE_CLASS | USB_RECIP_INTERFACE, + 0, us->ifnum, NULL, 0); +} +EXPORT_SYMBOL_GPL(usb_stor_Bulk_reset); + +/* Issue a USB port reset to the device. The caller must not hold + * us->dev_mutex. + */ +int usb_stor_port_reset(struct us_data *us) +{ + int result; + + /*for these devices we must use the class specific method */ + if (us->pusb_dev->quirks & USB_QUIRK_RESET) + return -EPERM; + + result = usb_lock_device_for_reset(us->pusb_dev, us->pusb_intf); + if (result < 0) + usb_stor_dbg(us, "unable to lock device for reset: %d\n", + result); + else { + /* Were we disconnected while waiting for the lock? */ + if (test_bit(US_FLIDX_DISCONNECTING, &us->dflags)) { + result = -EIO; + usb_stor_dbg(us, "No reset during disconnect\n"); + } else { + result = usb_reset_device(us->pusb_dev); + usb_stor_dbg(us, "usb_reset_device returns %d\n", + result); + } + usb_unlock_device(us->pusb_dev); + } + return result; +} diff --git a/kernel/drivers/usb/storage/transport.h b/kernel/drivers/usb/storage/transport.h new file mode 100644 index 000000000..9369d752d --- /dev/null +++ b/kernel/drivers/usb/storage/transport.h @@ -0,0 +1,103 @@ +/* Driver for USB Mass Storage compliant devices + * Transport Functions Header File + * + * Current development and maintenance by: + * (c) 1999, 2000 Matthew Dharm (mdharm-usb@one-eyed-alien.net) + * + * This driver is based on the 'USB Mass Storage Class' document. This + * describes in detail the protocol used to communicate with such + * devices. Clearly, the designers had SCSI and ATAPI commands in + * mind when they created this document. The commands are all very + * similar to commands in the SCSI-II and ATAPI specifications. + * + * It is important to note that in a number of cases this class + * exhibits class-specific exemptions from the USB specification. + * Notably the usage of NAK, STALL and ACK differs from the norm, in + * that they are used to communicate wait, failed and OK on commands. + * + * Also, for certain devices, the interrupt endpoint is used to convey + * status of a command. + * + * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more + * information about this driver. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _TRANSPORT_H_ +#define _TRANSPORT_H_ + +#include <linux/blkdev.h> + +/* + * usb_stor_bulk_transfer_xxx() return codes, in order of severity + */ + +#define USB_STOR_XFER_GOOD 0 /* good transfer */ +#define USB_STOR_XFER_SHORT 1 /* transferred less than expected */ +#define USB_STOR_XFER_STALLED 2 /* endpoint stalled */ +#define USB_STOR_XFER_LONG 3 /* device tried to send too much */ +#define USB_STOR_XFER_ERROR 4 /* transfer died in the middle */ + +/* + * Transport return codes + */ + +#define USB_STOR_TRANSPORT_GOOD 0 /* Transport good, command good */ +#define USB_STOR_TRANSPORT_FAILED 1 /* Transport good, command failed */ +#define USB_STOR_TRANSPORT_NO_SENSE 2 /* Command failed, no auto-sense */ +#define USB_STOR_TRANSPORT_ERROR 3 /* Transport bad (i.e. device dead) */ + +/* + * We used to have USB_STOR_XFER_ABORTED and USB_STOR_TRANSPORT_ABORTED + * return codes. But now the transport and low-level transfer routines + * treat an abort as just another error (-ENOENT for a cancelled URB). + * It is up to the invoke_transport() function to test for aborts and + * distinguish them from genuine communication errors. + */ + +/* + * CBI accept device specific command + */ + +#define US_CBI_ADSC 0 + +extern int usb_stor_CB_transport(struct scsi_cmnd *, struct us_data*); +extern int usb_stor_CB_reset(struct us_data*); + +extern int usb_stor_Bulk_transport(struct scsi_cmnd *, struct us_data*); +extern int usb_stor_Bulk_max_lun(struct us_data*); +extern int usb_stor_Bulk_reset(struct us_data*); + +extern void usb_stor_invoke_transport(struct scsi_cmnd *, struct us_data*); +extern void usb_stor_stop_transport(struct us_data*); + +extern int usb_stor_control_msg(struct us_data *us, unsigned int pipe, + u8 request, u8 requesttype, u16 value, u16 index, + void *data, u16 size, int timeout); +extern int usb_stor_clear_halt(struct us_data *us, unsigned int pipe); + +extern int usb_stor_ctrl_transfer(struct us_data *us, unsigned int pipe, + u8 request, u8 requesttype, u16 value, u16 index, + void *data, u16 size); +extern int usb_stor_bulk_transfer_buf(struct us_data *us, unsigned int pipe, + void *buf, unsigned int length, unsigned int *act_len); +extern int usb_stor_bulk_transfer_sg(struct us_data *us, unsigned int pipe, + void *buf, unsigned int length, int use_sg, int *residual); +extern int usb_stor_bulk_srb(struct us_data* us, unsigned int pipe, + struct scsi_cmnd* srb); + +extern int usb_stor_port_reset(struct us_data *us); +#endif diff --git a/kernel/drivers/usb/storage/uas-detect.h b/kernel/drivers/usb/storage/uas-detect.h new file mode 100644 index 000000000..f58caa9e6 --- /dev/null +++ b/kernel/drivers/usb/storage/uas-detect.h @@ -0,0 +1,143 @@ +#include <linux/usb.h> +#include <linux/usb/hcd.h> +#include "usb.h" + +static int uas_is_interface(struct usb_host_interface *intf) +{ + return (intf->desc.bInterfaceClass == USB_CLASS_MASS_STORAGE && + intf->desc.bInterfaceSubClass == USB_SC_SCSI && + intf->desc.bInterfaceProtocol == USB_PR_UAS); +} + +static int uas_find_uas_alt_setting(struct usb_interface *intf) +{ + int i; + + for (i = 0; i < intf->num_altsetting; i++) { + struct usb_host_interface *alt = &intf->altsetting[i]; + + if (uas_is_interface(alt)) + return alt->desc.bAlternateSetting; + } + + return -ENODEV; +} + +static int uas_find_endpoints(struct usb_host_interface *alt, + struct usb_host_endpoint *eps[]) +{ + struct usb_host_endpoint *endpoint = alt->endpoint; + unsigned i, n_endpoints = alt->desc.bNumEndpoints; + + for (i = 0; i < n_endpoints; i++) { + unsigned char *extra = endpoint[i].extra; + int len = endpoint[i].extralen; + while (len >= 3) { + if (extra[1] == USB_DT_PIPE_USAGE) { + unsigned pipe_id = extra[2]; + if (pipe_id > 0 && pipe_id < 5) + eps[pipe_id - 1] = &endpoint[i]; + break; + } + len -= extra[0]; + extra += extra[0]; + } + } + + if (!eps[0] || !eps[1] || !eps[2] || !eps[3]) + return -ENODEV; + + return 0; +} + +static int uas_use_uas_driver(struct usb_interface *intf, + const struct usb_device_id *id, + unsigned long *flags_ret) +{ + struct usb_host_endpoint *eps[4] = { }; + struct usb_device *udev = interface_to_usbdev(intf); + struct usb_hcd *hcd = bus_to_hcd(udev->bus); + unsigned long flags = id->driver_info; + int r, alt; + + + alt = uas_find_uas_alt_setting(intf); + if (alt < 0) + return 0; + + r = uas_find_endpoints(&intf->altsetting[alt], eps); + if (r < 0) + return 0; + + /* + * ASMedia has a number of usb3 to sata bridge chips, at the time of + * this writing the following versions exist: + * ASM1051 - no uas support version + * ASM1051 - with broken (*) uas support + * ASM1053 - with working uas support, but problems with large xfers + * ASM1153 - with working uas support + * + * Devices with these chips re-use a number of device-ids over the + * entire line, so the device-id is useless to determine if we're + * dealing with an ASM1051 (which we want to avoid). + * + * The ASM1153 can be identified by config.MaxPower == 0, + * where as the ASM105x models have config.MaxPower == 36. + * + * Differentiating between the ASM1053 and ASM1051 is trickier, when + * connected over USB-3 we can look at the number of streams supported, + * ASM1051 supports 32 streams, where as early ASM1053 versions support + * 16 streams, newer ASM1053-s also support 32 streams, but have a + * different prod-id. + * + * (*) ASM1051 chips do work with UAS with some disks (with the + * US_FL_NO_REPORT_OPCODES quirk), but are broken with other disks + */ + if (le16_to_cpu(udev->descriptor.idVendor) == 0x174c && + (le16_to_cpu(udev->descriptor.idProduct) == 0x5106 || + le16_to_cpu(udev->descriptor.idProduct) == 0x55aa)) { + if (udev->actconfig->desc.bMaxPower == 0) { + /* ASM1153, do nothing */ + } else if (udev->speed < USB_SPEED_SUPER) { + /* No streams info, assume ASM1051 */ + flags |= US_FL_IGNORE_UAS; + } else if (usb_ss_max_streams(&eps[1]->ss_ep_comp) == 32) { + /* Possibly an ASM1051, disable uas */ + flags |= US_FL_IGNORE_UAS; + } else { + /* ASM1053, these have issues with large transfers */ + flags |= US_FL_MAX_SECTORS_240; + } + } + + usb_stor_adjust_quirks(udev, &flags); + + if (flags & US_FL_IGNORE_UAS) { + dev_warn(&udev->dev, + "UAS is blacklisted for this device, using usb-storage instead\n"); + return 0; + } + + if (udev->bus->sg_tablesize == 0) { + dev_warn(&udev->dev, + "The driver for the USB controller %s does not support scatter-gather which is\n", + hcd->driver->description); + dev_warn(&udev->dev, + "required by the UAS driver. Please try an other USB controller if you wish to use UAS.\n"); + return 0; + } + + if (udev->speed >= USB_SPEED_SUPER && !hcd->can_do_streams) { + dev_warn(&udev->dev, + "USB controller %s does not support streams, which are required by the UAS driver.\n", + hcd_to_bus(hcd)->bus_name); + dev_warn(&udev->dev, + "Please try an other USB controller if you wish to use UAS.\n"); + return 0; + } + + if (flags_ret) + *flags_ret = flags; + + return 1; +} diff --git a/kernel/drivers/usb/storage/uas.c b/kernel/drivers/usb/storage/uas.c new file mode 100644 index 000000000..6d3122afe --- /dev/null +++ b/kernel/drivers/usb/storage/uas.c @@ -0,0 +1,1154 @@ +/* + * USB Attached SCSI + * Note that this is not the same as the USB Mass Storage driver + * + * Copyright Hans de Goede <hdegoede@redhat.com> for Red Hat, Inc. 2013 - 2014 + * Copyright Matthew Wilcox for Intel Corp, 2010 + * Copyright Sarah Sharp for Intel Corp, 2010 + * + * Distributed under the terms of the GNU GPL, version two. + */ + +#include <linux/blkdev.h> +#include <linux/slab.h> +#include <linux/types.h> +#include <linux/module.h> +#include <linux/usb.h> +#include <linux/usb_usual.h> +#include <linux/usb/hcd.h> +#include <linux/usb/storage.h> +#include <linux/usb/uas.h> + +#include <scsi/scsi.h> +#include <scsi/scsi_eh.h> +#include <scsi/scsi_dbg.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_device.h> +#include <scsi/scsi_host.h> +#include <scsi/scsi_tcq.h> + +#include "uas-detect.h" +#include "scsiglue.h" + +#define MAX_CMNDS 256 + +struct uas_dev_info { + struct usb_interface *intf; + struct usb_device *udev; + struct usb_anchor cmd_urbs; + struct usb_anchor sense_urbs; + struct usb_anchor data_urbs; + unsigned long flags; + int qdepth, resetting; + unsigned cmd_pipe, status_pipe, data_in_pipe, data_out_pipe; + unsigned use_streams:1; + unsigned shutdown:1; + struct scsi_cmnd *cmnd[MAX_CMNDS]; + spinlock_t lock; + struct work_struct work; +}; + +enum { + SUBMIT_STATUS_URB = (1 << 1), + ALLOC_DATA_IN_URB = (1 << 2), + SUBMIT_DATA_IN_URB = (1 << 3), + ALLOC_DATA_OUT_URB = (1 << 4), + SUBMIT_DATA_OUT_URB = (1 << 5), + ALLOC_CMD_URB = (1 << 6), + SUBMIT_CMD_URB = (1 << 7), + COMMAND_INFLIGHT = (1 << 8), + DATA_IN_URB_INFLIGHT = (1 << 9), + DATA_OUT_URB_INFLIGHT = (1 << 10), + COMMAND_ABORTED = (1 << 11), + IS_IN_WORK_LIST = (1 << 12), +}; + +/* Overrides scsi_pointer */ +struct uas_cmd_info { + unsigned int state; + unsigned int uas_tag; + struct urb *cmd_urb; + struct urb *data_in_urb; + struct urb *data_out_urb; +}; + +/* I hate forward declarations, but I actually have a loop */ +static int uas_submit_urbs(struct scsi_cmnd *cmnd, + struct uas_dev_info *devinfo, gfp_t gfp); +static void uas_do_work(struct work_struct *work); +static int uas_try_complete(struct scsi_cmnd *cmnd, const char *caller); +static void uas_free_streams(struct uas_dev_info *devinfo); +static void uas_log_cmd_state(struct scsi_cmnd *cmnd, const char *prefix, + int status); + +static void uas_do_work(struct work_struct *work) +{ + struct uas_dev_info *devinfo = + container_of(work, struct uas_dev_info, work); + struct uas_cmd_info *cmdinfo; + struct scsi_cmnd *cmnd; + unsigned long flags; + int i, err; + + spin_lock_irqsave(&devinfo->lock, flags); + + if (devinfo->resetting) + goto out; + + for (i = 0; i < devinfo->qdepth; i++) { + if (!devinfo->cmnd[i]) + continue; + + cmnd = devinfo->cmnd[i]; + cmdinfo = (void *)&cmnd->SCp; + + if (!(cmdinfo->state & IS_IN_WORK_LIST)) + continue; + + err = uas_submit_urbs(cmnd, cmnd->device->hostdata, GFP_ATOMIC); + if (!err) + cmdinfo->state &= ~IS_IN_WORK_LIST; + else + schedule_work(&devinfo->work); + } +out: + spin_unlock_irqrestore(&devinfo->lock, flags); +} + +static void uas_add_work(struct uas_cmd_info *cmdinfo) +{ + struct scsi_pointer *scp = (void *)cmdinfo; + struct scsi_cmnd *cmnd = container_of(scp, struct scsi_cmnd, SCp); + struct uas_dev_info *devinfo = cmnd->device->hostdata; + + lockdep_assert_held(&devinfo->lock); + cmdinfo->state |= IS_IN_WORK_LIST; + schedule_work(&devinfo->work); +} + +static void uas_zap_pending(struct uas_dev_info *devinfo, int result) +{ + struct uas_cmd_info *cmdinfo; + struct scsi_cmnd *cmnd; + unsigned long flags; + int i, err; + + spin_lock_irqsave(&devinfo->lock, flags); + for (i = 0; i < devinfo->qdepth; i++) { + if (!devinfo->cmnd[i]) + continue; + + cmnd = devinfo->cmnd[i]; + cmdinfo = (void *)&cmnd->SCp; + uas_log_cmd_state(cmnd, __func__, 0); + /* Sense urbs were killed, clear COMMAND_INFLIGHT manually */ + cmdinfo->state &= ~COMMAND_INFLIGHT; + cmnd->result = result << 16; + err = uas_try_complete(cmnd, __func__); + WARN_ON(err != 0); + } + spin_unlock_irqrestore(&devinfo->lock, flags); +} + +static void uas_sense(struct urb *urb, struct scsi_cmnd *cmnd) +{ + struct sense_iu *sense_iu = urb->transfer_buffer; + struct scsi_device *sdev = cmnd->device; + + if (urb->actual_length > 16) { + unsigned len = be16_to_cpup(&sense_iu->len); + if (len + 16 != urb->actual_length) { + int newlen = min(len + 16, urb->actual_length) - 16; + if (newlen < 0) + newlen = 0; + sdev_printk(KERN_INFO, sdev, "%s: urb length %d " + "disagrees with IU sense data length %d, " + "using %d bytes of sense data\n", __func__, + urb->actual_length, len, newlen); + len = newlen; + } + memcpy(cmnd->sense_buffer, sense_iu->sense, len); + } + + cmnd->result = sense_iu->status; +} + +static void uas_log_cmd_state(struct scsi_cmnd *cmnd, const char *prefix, + int status) +{ + struct uas_cmd_info *ci = (void *)&cmnd->SCp; + struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; + + scmd_printk(KERN_INFO, cmnd, + "%s %d uas-tag %d inflight:%s%s%s%s%s%s%s%s%s%s%s%s ", + prefix, status, cmdinfo->uas_tag, + (ci->state & SUBMIT_STATUS_URB) ? " s-st" : "", + (ci->state & ALLOC_DATA_IN_URB) ? " a-in" : "", + (ci->state & SUBMIT_DATA_IN_URB) ? " s-in" : "", + (ci->state & ALLOC_DATA_OUT_URB) ? " a-out" : "", + (ci->state & SUBMIT_DATA_OUT_URB) ? " s-out" : "", + (ci->state & ALLOC_CMD_URB) ? " a-cmd" : "", + (ci->state & SUBMIT_CMD_URB) ? " s-cmd" : "", + (ci->state & COMMAND_INFLIGHT) ? " CMD" : "", + (ci->state & DATA_IN_URB_INFLIGHT) ? " IN" : "", + (ci->state & DATA_OUT_URB_INFLIGHT) ? " OUT" : "", + (ci->state & COMMAND_ABORTED) ? " abort" : "", + (ci->state & IS_IN_WORK_LIST) ? " work" : ""); + scsi_print_command(cmnd); +} + +static void uas_free_unsubmitted_urbs(struct scsi_cmnd *cmnd) +{ + struct uas_cmd_info *cmdinfo; + + if (!cmnd) + return; + + cmdinfo = (void *)&cmnd->SCp; + + if (cmdinfo->state & SUBMIT_CMD_URB) + usb_free_urb(cmdinfo->cmd_urb); + + /* data urbs may have never gotten their submit flag set */ + if (!(cmdinfo->state & DATA_IN_URB_INFLIGHT)) + usb_free_urb(cmdinfo->data_in_urb); + if (!(cmdinfo->state & DATA_OUT_URB_INFLIGHT)) + usb_free_urb(cmdinfo->data_out_urb); +} + +static int uas_try_complete(struct scsi_cmnd *cmnd, const char *caller) +{ + struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; + struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata; + + lockdep_assert_held(&devinfo->lock); + if (cmdinfo->state & (COMMAND_INFLIGHT | + DATA_IN_URB_INFLIGHT | + DATA_OUT_URB_INFLIGHT | + COMMAND_ABORTED)) + return -EBUSY; + devinfo->cmnd[cmdinfo->uas_tag - 1] = NULL; + uas_free_unsubmitted_urbs(cmnd); + cmnd->scsi_done(cmnd); + return 0; +} + +static void uas_xfer_data(struct urb *urb, struct scsi_cmnd *cmnd, + unsigned direction) +{ + struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; + int err; + + cmdinfo->state |= direction | SUBMIT_STATUS_URB; + err = uas_submit_urbs(cmnd, cmnd->device->hostdata, GFP_ATOMIC); + if (err) { + uas_add_work(cmdinfo); + } +} + +static void uas_stat_cmplt(struct urb *urb) +{ + struct iu *iu = urb->transfer_buffer; + struct Scsi_Host *shost = urb->context; + struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata; + struct urb *data_in_urb = NULL; + struct urb *data_out_urb = NULL; + struct scsi_cmnd *cmnd; + struct uas_cmd_info *cmdinfo; + unsigned long flags; + unsigned int idx; + + spin_lock_irqsave(&devinfo->lock, flags); + + if (devinfo->resetting) + goto out; + + if (urb->status) { + if (urb->status != -ENOENT && urb->status != -ECONNRESET) { + dev_err(&urb->dev->dev, "stat urb: status %d\n", + urb->status); + } + goto out; + } + + idx = be16_to_cpup(&iu->tag) - 1; + if (idx >= MAX_CMNDS || !devinfo->cmnd[idx]) { + dev_err(&urb->dev->dev, + "stat urb: no pending cmd for uas-tag %d\n", idx + 1); + goto out; + } + + cmnd = devinfo->cmnd[idx]; + cmdinfo = (void *)&cmnd->SCp; + + if (!(cmdinfo->state & COMMAND_INFLIGHT)) { + uas_log_cmd_state(cmnd, "unexpected status cmplt", 0); + goto out; + } + + switch (iu->iu_id) { + case IU_ID_STATUS: + uas_sense(urb, cmnd); + if (cmnd->result != 0) { + /* cancel data transfers on error */ + data_in_urb = usb_get_urb(cmdinfo->data_in_urb); + data_out_urb = usb_get_urb(cmdinfo->data_out_urb); + } + cmdinfo->state &= ~COMMAND_INFLIGHT; + uas_try_complete(cmnd, __func__); + break; + case IU_ID_READ_READY: + if (!cmdinfo->data_in_urb || + (cmdinfo->state & DATA_IN_URB_INFLIGHT)) { + uas_log_cmd_state(cmnd, "unexpected read rdy", 0); + break; + } + uas_xfer_data(urb, cmnd, SUBMIT_DATA_IN_URB); + break; + case IU_ID_WRITE_READY: + if (!cmdinfo->data_out_urb || + (cmdinfo->state & DATA_OUT_URB_INFLIGHT)) { + uas_log_cmd_state(cmnd, "unexpected write rdy", 0); + break; + } + uas_xfer_data(urb, cmnd, SUBMIT_DATA_OUT_URB); + break; + case IU_ID_RESPONSE: + uas_log_cmd_state(cmnd, "unexpected response iu", + ((struct response_iu *)iu)->response_code); + /* Error, cancel data transfers */ + data_in_urb = usb_get_urb(cmdinfo->data_in_urb); + data_out_urb = usb_get_urb(cmdinfo->data_out_urb); + cmdinfo->state &= ~COMMAND_INFLIGHT; + cmnd->result = DID_ERROR << 16; + uas_try_complete(cmnd, __func__); + break; + default: + uas_log_cmd_state(cmnd, "bogus IU", iu->iu_id); + } +out: + usb_free_urb(urb); + spin_unlock_irqrestore(&devinfo->lock, flags); + + /* Unlinking of data urbs must be done without holding the lock */ + if (data_in_urb) { + usb_unlink_urb(data_in_urb); + usb_put_urb(data_in_urb); + } + if (data_out_urb) { + usb_unlink_urb(data_out_urb); + usb_put_urb(data_out_urb); + } +} + +static void uas_data_cmplt(struct urb *urb) +{ + struct scsi_cmnd *cmnd = urb->context; + struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; + struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata; + struct scsi_data_buffer *sdb = NULL; + unsigned long flags; + + spin_lock_irqsave(&devinfo->lock, flags); + + if (cmdinfo->data_in_urb == urb) { + sdb = scsi_in(cmnd); + cmdinfo->state &= ~DATA_IN_URB_INFLIGHT; + cmdinfo->data_in_urb = NULL; + } else if (cmdinfo->data_out_urb == urb) { + sdb = scsi_out(cmnd); + cmdinfo->state &= ~DATA_OUT_URB_INFLIGHT; + cmdinfo->data_out_urb = NULL; + } + if (sdb == NULL) { + WARN_ON_ONCE(1); + goto out; + } + + if (devinfo->resetting) + goto out; + + /* Data urbs should not complete before the cmd urb is submitted */ + if (cmdinfo->state & SUBMIT_CMD_URB) { + uas_log_cmd_state(cmnd, "unexpected data cmplt", 0); + goto out; + } + + if (urb->status) { + if (urb->status != -ENOENT && urb->status != -ECONNRESET) + uas_log_cmd_state(cmnd, "data cmplt err", urb->status); + /* error: no data transfered */ + sdb->resid = sdb->length; + } else { + sdb->resid = sdb->length - urb->actual_length; + } + uas_try_complete(cmnd, __func__); +out: + usb_free_urb(urb); + spin_unlock_irqrestore(&devinfo->lock, flags); +} + +static void uas_cmd_cmplt(struct urb *urb) +{ + if (urb->status) + dev_err(&urb->dev->dev, "cmd cmplt err %d\n", urb->status); + + usb_free_urb(urb); +} + +static struct urb *uas_alloc_data_urb(struct uas_dev_info *devinfo, gfp_t gfp, + struct scsi_cmnd *cmnd, + enum dma_data_direction dir) +{ + struct usb_device *udev = devinfo->udev; + struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; + struct urb *urb = usb_alloc_urb(0, gfp); + struct scsi_data_buffer *sdb = (dir == DMA_FROM_DEVICE) + ? scsi_in(cmnd) : scsi_out(cmnd); + unsigned int pipe = (dir == DMA_FROM_DEVICE) + ? devinfo->data_in_pipe : devinfo->data_out_pipe; + + if (!urb) + goto out; + usb_fill_bulk_urb(urb, udev, pipe, NULL, sdb->length, + uas_data_cmplt, cmnd); + if (devinfo->use_streams) + urb->stream_id = cmdinfo->uas_tag; + urb->num_sgs = udev->bus->sg_tablesize ? sdb->table.nents : 0; + urb->sg = sdb->table.sgl; + out: + return urb; +} + +static struct urb *uas_alloc_sense_urb(struct uas_dev_info *devinfo, gfp_t gfp, + struct scsi_cmnd *cmnd) +{ + struct usb_device *udev = devinfo->udev; + struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; + struct urb *urb = usb_alloc_urb(0, gfp); + struct sense_iu *iu; + + if (!urb) + goto out; + + iu = kzalloc(sizeof(*iu), gfp); + if (!iu) + goto free; + + usb_fill_bulk_urb(urb, udev, devinfo->status_pipe, iu, sizeof(*iu), + uas_stat_cmplt, cmnd->device->host); + if (devinfo->use_streams) + urb->stream_id = cmdinfo->uas_tag; + urb->transfer_flags |= URB_FREE_BUFFER; + out: + return urb; + free: + usb_free_urb(urb); + return NULL; +} + +static struct urb *uas_alloc_cmd_urb(struct uas_dev_info *devinfo, gfp_t gfp, + struct scsi_cmnd *cmnd) +{ + struct usb_device *udev = devinfo->udev; + struct scsi_device *sdev = cmnd->device; + struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; + struct urb *urb = usb_alloc_urb(0, gfp); + struct command_iu *iu; + int len; + + if (!urb) + goto out; + + len = cmnd->cmd_len - 16; + if (len < 0) + len = 0; + len = ALIGN(len, 4); + iu = kzalloc(sizeof(*iu) + len, gfp); + if (!iu) + goto free; + + iu->iu_id = IU_ID_COMMAND; + iu->tag = cpu_to_be16(cmdinfo->uas_tag); + iu->prio_attr = UAS_SIMPLE_TAG; + iu->len = len; + int_to_scsilun(sdev->lun, &iu->lun); + memcpy(iu->cdb, cmnd->cmnd, cmnd->cmd_len); + + usb_fill_bulk_urb(urb, udev, devinfo->cmd_pipe, iu, sizeof(*iu) + len, + uas_cmd_cmplt, NULL); + urb->transfer_flags |= URB_FREE_BUFFER; + out: + return urb; + free: + usb_free_urb(urb); + return NULL; +} + +/* + * Why should I request the Status IU before sending the Command IU? Spec + * says to, but also says the device may receive them in any order. Seems + * daft to me. + */ + +static struct urb *uas_submit_sense_urb(struct scsi_cmnd *cmnd, gfp_t gfp) +{ + struct uas_dev_info *devinfo = cmnd->device->hostdata; + struct urb *urb; + int err; + + urb = uas_alloc_sense_urb(devinfo, gfp, cmnd); + if (!urb) + return NULL; + usb_anchor_urb(urb, &devinfo->sense_urbs); + err = usb_submit_urb(urb, gfp); + if (err) { + usb_unanchor_urb(urb); + uas_log_cmd_state(cmnd, "sense submit err", err); + usb_free_urb(urb); + return NULL; + } + return urb; +} + +static int uas_submit_urbs(struct scsi_cmnd *cmnd, + struct uas_dev_info *devinfo, gfp_t gfp) +{ + struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; + struct urb *urb; + int err; + + lockdep_assert_held(&devinfo->lock); + if (cmdinfo->state & SUBMIT_STATUS_URB) { + urb = uas_submit_sense_urb(cmnd, gfp); + if (!urb) + return SCSI_MLQUEUE_DEVICE_BUSY; + cmdinfo->state &= ~SUBMIT_STATUS_URB; + } + + if (cmdinfo->state & ALLOC_DATA_IN_URB) { + cmdinfo->data_in_urb = uas_alloc_data_urb(devinfo, gfp, + cmnd, DMA_FROM_DEVICE); + if (!cmdinfo->data_in_urb) + return SCSI_MLQUEUE_DEVICE_BUSY; + cmdinfo->state &= ~ALLOC_DATA_IN_URB; + } + + if (cmdinfo->state & SUBMIT_DATA_IN_URB) { + usb_anchor_urb(cmdinfo->data_in_urb, &devinfo->data_urbs); + err = usb_submit_urb(cmdinfo->data_in_urb, gfp); + if (err) { + usb_unanchor_urb(cmdinfo->data_in_urb); + uas_log_cmd_state(cmnd, "data in submit err", err); + return SCSI_MLQUEUE_DEVICE_BUSY; + } + cmdinfo->state &= ~SUBMIT_DATA_IN_URB; + cmdinfo->state |= DATA_IN_URB_INFLIGHT; + } + + if (cmdinfo->state & ALLOC_DATA_OUT_URB) { + cmdinfo->data_out_urb = uas_alloc_data_urb(devinfo, gfp, + cmnd, DMA_TO_DEVICE); + if (!cmdinfo->data_out_urb) + return SCSI_MLQUEUE_DEVICE_BUSY; + cmdinfo->state &= ~ALLOC_DATA_OUT_URB; + } + + if (cmdinfo->state & SUBMIT_DATA_OUT_URB) { + usb_anchor_urb(cmdinfo->data_out_urb, &devinfo->data_urbs); + err = usb_submit_urb(cmdinfo->data_out_urb, gfp); + if (err) { + usb_unanchor_urb(cmdinfo->data_out_urb); + uas_log_cmd_state(cmnd, "data out submit err", err); + return SCSI_MLQUEUE_DEVICE_BUSY; + } + cmdinfo->state &= ~SUBMIT_DATA_OUT_URB; + cmdinfo->state |= DATA_OUT_URB_INFLIGHT; + } + + if (cmdinfo->state & ALLOC_CMD_URB) { + cmdinfo->cmd_urb = uas_alloc_cmd_urb(devinfo, gfp, cmnd); + if (!cmdinfo->cmd_urb) + return SCSI_MLQUEUE_DEVICE_BUSY; + cmdinfo->state &= ~ALLOC_CMD_URB; + } + + if (cmdinfo->state & SUBMIT_CMD_URB) { + usb_anchor_urb(cmdinfo->cmd_urb, &devinfo->cmd_urbs); + err = usb_submit_urb(cmdinfo->cmd_urb, gfp); + if (err) { + usb_unanchor_urb(cmdinfo->cmd_urb); + uas_log_cmd_state(cmnd, "cmd submit err", err); + return SCSI_MLQUEUE_DEVICE_BUSY; + } + cmdinfo->cmd_urb = NULL; + cmdinfo->state &= ~SUBMIT_CMD_URB; + cmdinfo->state |= COMMAND_INFLIGHT; + } + + return 0; +} + +static int uas_queuecommand_lck(struct scsi_cmnd *cmnd, + void (*done)(struct scsi_cmnd *)) +{ + struct scsi_device *sdev = cmnd->device; + struct uas_dev_info *devinfo = sdev->hostdata; + struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; + unsigned long flags; + int idx, err; + + BUILD_BUG_ON(sizeof(struct uas_cmd_info) > sizeof(struct scsi_pointer)); + + /* Re-check scsi_block_requests now that we've the host-lock */ + if (cmnd->device->host->host_self_blocked) + return SCSI_MLQUEUE_DEVICE_BUSY; + + if ((devinfo->flags & US_FL_NO_ATA_1X) && + (cmnd->cmnd[0] == ATA_12 || cmnd->cmnd[0] == ATA_16)) { + memcpy(cmnd->sense_buffer, usb_stor_sense_invalidCDB, + sizeof(usb_stor_sense_invalidCDB)); + cmnd->result = SAM_STAT_CHECK_CONDITION; + cmnd->scsi_done(cmnd); + return 0; + } + + spin_lock_irqsave(&devinfo->lock, flags); + + if (devinfo->resetting) { + cmnd->result = DID_ERROR << 16; + cmnd->scsi_done(cmnd); + spin_unlock_irqrestore(&devinfo->lock, flags); + return 0; + } + + /* Find a free uas-tag */ + for (idx = 0; idx < devinfo->qdepth; idx++) { + if (!devinfo->cmnd[idx]) + break; + } + if (idx == devinfo->qdepth) { + spin_unlock_irqrestore(&devinfo->lock, flags); + return SCSI_MLQUEUE_DEVICE_BUSY; + } + + cmnd->scsi_done = done; + + memset(cmdinfo, 0, sizeof(*cmdinfo)); + cmdinfo->uas_tag = idx + 1; /* uas-tag == usb-stream-id, so 1 based */ + cmdinfo->state = SUBMIT_STATUS_URB | ALLOC_CMD_URB | SUBMIT_CMD_URB; + + switch (cmnd->sc_data_direction) { + case DMA_FROM_DEVICE: + cmdinfo->state |= ALLOC_DATA_IN_URB | SUBMIT_DATA_IN_URB; + break; + case DMA_BIDIRECTIONAL: + cmdinfo->state |= ALLOC_DATA_IN_URB | SUBMIT_DATA_IN_URB; + case DMA_TO_DEVICE: + cmdinfo->state |= ALLOC_DATA_OUT_URB | SUBMIT_DATA_OUT_URB; + case DMA_NONE: + break; + } + + if (!devinfo->use_streams) + cmdinfo->state &= ~(SUBMIT_DATA_IN_URB | SUBMIT_DATA_OUT_URB); + + err = uas_submit_urbs(cmnd, devinfo, GFP_ATOMIC); + if (err) { + /* If we did nothing, give up now */ + if (cmdinfo->state & SUBMIT_STATUS_URB) { + spin_unlock_irqrestore(&devinfo->lock, flags); + return SCSI_MLQUEUE_DEVICE_BUSY; + } + uas_add_work(cmdinfo); + } + + devinfo->cmnd[idx] = cmnd; + spin_unlock_irqrestore(&devinfo->lock, flags); + return 0; +} + +static DEF_SCSI_QCMD(uas_queuecommand) + +/* + * For now we do not support actually sending an abort to the device, so + * this eh always fails. Still we must define it to make sure that we've + * dropped all references to the cmnd in question once this function exits. + */ +static int uas_eh_abort_handler(struct scsi_cmnd *cmnd) +{ + struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; + struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata; + struct urb *data_in_urb = NULL; + struct urb *data_out_urb = NULL; + unsigned long flags; + + spin_lock_irqsave(&devinfo->lock, flags); + + uas_log_cmd_state(cmnd, __func__, 0); + + /* Ensure that try_complete does not call scsi_done */ + cmdinfo->state |= COMMAND_ABORTED; + + /* Drop all refs to this cmnd, kill data urbs to break their ref */ + devinfo->cmnd[cmdinfo->uas_tag - 1] = NULL; + if (cmdinfo->state & DATA_IN_URB_INFLIGHT) + data_in_urb = usb_get_urb(cmdinfo->data_in_urb); + if (cmdinfo->state & DATA_OUT_URB_INFLIGHT) + data_out_urb = usb_get_urb(cmdinfo->data_out_urb); + + uas_free_unsubmitted_urbs(cmnd); + + spin_unlock_irqrestore(&devinfo->lock, flags); + + if (data_in_urb) { + usb_kill_urb(data_in_urb); + usb_put_urb(data_in_urb); + } + if (data_out_urb) { + usb_kill_urb(data_out_urb); + usb_put_urb(data_out_urb); + } + + return FAILED; +} + +static int uas_eh_bus_reset_handler(struct scsi_cmnd *cmnd) +{ + struct scsi_device *sdev = cmnd->device; + struct uas_dev_info *devinfo = sdev->hostdata; + struct usb_device *udev = devinfo->udev; + unsigned long flags; + int err; + + err = usb_lock_device_for_reset(udev, devinfo->intf); + if (err) { + shost_printk(KERN_ERR, sdev->host, + "%s FAILED to get lock err %d\n", __func__, err); + return FAILED; + } + + shost_printk(KERN_INFO, sdev->host, "%s start\n", __func__); + + spin_lock_irqsave(&devinfo->lock, flags); + devinfo->resetting = 1; + spin_unlock_irqrestore(&devinfo->lock, flags); + + usb_kill_anchored_urbs(&devinfo->cmd_urbs); + usb_kill_anchored_urbs(&devinfo->sense_urbs); + usb_kill_anchored_urbs(&devinfo->data_urbs); + uas_zap_pending(devinfo, DID_RESET); + + err = usb_reset_device(udev); + + spin_lock_irqsave(&devinfo->lock, flags); + devinfo->resetting = 0; + spin_unlock_irqrestore(&devinfo->lock, flags); + + usb_unlock_device(udev); + + if (err) { + shost_printk(KERN_INFO, sdev->host, "%s FAILED err %d\n", + __func__, err); + return FAILED; + } + + shost_printk(KERN_INFO, sdev->host, "%s success\n", __func__); + return SUCCESS; +} + +static int uas_slave_alloc(struct scsi_device *sdev) +{ + struct uas_dev_info *devinfo = + (struct uas_dev_info *)sdev->host->hostdata; + + sdev->hostdata = devinfo; + + /* USB has unusual DMA-alignment requirements: Although the + * starting address of each scatter-gather element doesn't matter, + * the length of each element except the last must be divisible + * by the Bulk maxpacket value. There's currently no way to + * express this by block-layer constraints, so we'll cop out + * and simply require addresses to be aligned at 512-byte + * boundaries. This is okay since most block I/O involves + * hardware sectors that are multiples of 512 bytes in length, + * and since host controllers up through USB 2.0 have maxpacket + * values no larger than 512. + * + * But it doesn't suffice for Wireless USB, where Bulk maxpacket + * values can be as large as 2048. To make that work properly + * will require changes to the block layer. + */ + blk_queue_update_dma_alignment(sdev->request_queue, (512 - 1)); + + if (devinfo->flags & US_FL_MAX_SECTORS_64) + blk_queue_max_hw_sectors(sdev->request_queue, 64); + else if (devinfo->flags & US_FL_MAX_SECTORS_240) + blk_queue_max_hw_sectors(sdev->request_queue, 240); + + return 0; +} + +static int uas_slave_configure(struct scsi_device *sdev) +{ + struct uas_dev_info *devinfo = sdev->hostdata; + + if (devinfo->flags & US_FL_NO_REPORT_OPCODES) + sdev->no_report_opcodes = 1; + + scsi_change_queue_depth(sdev, devinfo->qdepth - 2); + return 0; +} + +static struct scsi_host_template uas_host_template = { + .module = THIS_MODULE, + .name = "uas", + .queuecommand = uas_queuecommand, + .slave_alloc = uas_slave_alloc, + .slave_configure = uas_slave_configure, + .eh_abort_handler = uas_eh_abort_handler, + .eh_bus_reset_handler = uas_eh_bus_reset_handler, + .can_queue = 65536, /* Is there a limit on the _host_ ? */ + .this_id = -1, + .sg_tablesize = SG_NONE, + .cmd_per_lun = 1, /* until we override it */ + .skip_settle_delay = 1, + .use_blk_tags = 1, +}; + +#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ + vendorName, productName, useProtocol, useTransport, \ + initFunction, flags) \ +{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ + .driver_info = (flags) } + +static struct usb_device_id uas_usb_ids[] = { +# include "unusual_uas.h" + { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, USB_PR_BULK) }, + { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, USB_PR_UAS) }, + { } +}; +MODULE_DEVICE_TABLE(usb, uas_usb_ids); + +#undef UNUSUAL_DEV + +static int uas_switch_interface(struct usb_device *udev, + struct usb_interface *intf) +{ + int alt; + + alt = uas_find_uas_alt_setting(intf); + if (alt < 0) + return alt; + + return usb_set_interface(udev, + intf->altsetting[0].desc.bInterfaceNumber, alt); +} + +static int uas_configure_endpoints(struct uas_dev_info *devinfo) +{ + struct usb_host_endpoint *eps[4] = { }; + struct usb_device *udev = devinfo->udev; + int r; + + r = uas_find_endpoints(devinfo->intf->cur_altsetting, eps); + if (r) + return r; + + devinfo->cmd_pipe = usb_sndbulkpipe(udev, + usb_endpoint_num(&eps[0]->desc)); + devinfo->status_pipe = usb_rcvbulkpipe(udev, + usb_endpoint_num(&eps[1]->desc)); + devinfo->data_in_pipe = usb_rcvbulkpipe(udev, + usb_endpoint_num(&eps[2]->desc)); + devinfo->data_out_pipe = usb_sndbulkpipe(udev, + usb_endpoint_num(&eps[3]->desc)); + + if (udev->speed < USB_SPEED_SUPER) { + devinfo->qdepth = 32; + devinfo->use_streams = 0; + } else { + devinfo->qdepth = usb_alloc_streams(devinfo->intf, eps + 1, + 3, MAX_CMNDS, GFP_NOIO); + if (devinfo->qdepth < 0) + return devinfo->qdepth; + devinfo->use_streams = 1; + } + + return 0; +} + +static void uas_free_streams(struct uas_dev_info *devinfo) +{ + struct usb_device *udev = devinfo->udev; + struct usb_host_endpoint *eps[3]; + + eps[0] = usb_pipe_endpoint(udev, devinfo->status_pipe); + eps[1] = usb_pipe_endpoint(udev, devinfo->data_in_pipe); + eps[2] = usb_pipe_endpoint(udev, devinfo->data_out_pipe); + usb_free_streams(devinfo->intf, eps, 3, GFP_NOIO); +} + +static int uas_probe(struct usb_interface *intf, const struct usb_device_id *id) +{ + int result = -ENOMEM; + struct Scsi_Host *shost = NULL; + struct uas_dev_info *devinfo; + struct usb_device *udev = interface_to_usbdev(intf); + unsigned long dev_flags; + + if (!uas_use_uas_driver(intf, id, &dev_flags)) + return -ENODEV; + + if (uas_switch_interface(udev, intf)) + return -ENODEV; + + shost = scsi_host_alloc(&uas_host_template, + sizeof(struct uas_dev_info)); + if (!shost) + goto set_alt0; + + shost->max_cmd_len = 16 + 252; + shost->max_id = 1; + shost->max_lun = 256; + shost->max_channel = 0; + shost->sg_tablesize = udev->bus->sg_tablesize; + + devinfo = (struct uas_dev_info *)shost->hostdata; + devinfo->intf = intf; + devinfo->udev = udev; + devinfo->resetting = 0; + devinfo->shutdown = 0; + devinfo->flags = dev_flags; + init_usb_anchor(&devinfo->cmd_urbs); + init_usb_anchor(&devinfo->sense_urbs); + init_usb_anchor(&devinfo->data_urbs); + spin_lock_init(&devinfo->lock); + INIT_WORK(&devinfo->work, uas_do_work); + + result = uas_configure_endpoints(devinfo); + if (result) + goto set_alt0; + + result = scsi_init_shared_tag_map(shost, devinfo->qdepth - 2); + if (result) + goto free_streams; + + usb_set_intfdata(intf, shost); + result = scsi_add_host(shost, &intf->dev); + if (result) + goto free_streams; + + scsi_scan_host(shost); + return result; + +free_streams: + uas_free_streams(devinfo); + usb_set_intfdata(intf, NULL); +set_alt0: + usb_set_interface(udev, intf->altsetting[0].desc.bInterfaceNumber, 0); + if (shost) + scsi_host_put(shost); + return result; +} + +static int uas_cmnd_list_empty(struct uas_dev_info *devinfo) +{ + unsigned long flags; + int i, r = 1; + + spin_lock_irqsave(&devinfo->lock, flags); + + for (i = 0; i < devinfo->qdepth; i++) { + if (devinfo->cmnd[i]) { + r = 0; /* Not empty */ + break; + } + } + + spin_unlock_irqrestore(&devinfo->lock, flags); + + return r; +} + +/* + * Wait for any pending cmnds to complete, on usb-2 sense_urbs may temporarily + * get empty while there still is more work to do due to sense-urbs completing + * with a READ/WRITE_READY iu code, so keep waiting until the list gets empty. + */ +static int uas_wait_for_pending_cmnds(struct uas_dev_info *devinfo) +{ + unsigned long start_time; + int r; + + start_time = jiffies; + do { + flush_work(&devinfo->work); + + r = usb_wait_anchor_empty_timeout(&devinfo->sense_urbs, 5000); + if (r == 0) + return -ETIME; + + r = usb_wait_anchor_empty_timeout(&devinfo->data_urbs, 500); + if (r == 0) + return -ETIME; + + if (time_after(jiffies, start_time + 5 * HZ)) + return -ETIME; + } while (!uas_cmnd_list_empty(devinfo)); + + return 0; +} + +static int uas_pre_reset(struct usb_interface *intf) +{ + struct Scsi_Host *shost = usb_get_intfdata(intf); + struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata; + unsigned long flags; + + if (devinfo->shutdown) + return 0; + + /* Block new requests */ + spin_lock_irqsave(shost->host_lock, flags); + scsi_block_requests(shost); + spin_unlock_irqrestore(shost->host_lock, flags); + + if (uas_wait_for_pending_cmnds(devinfo) != 0) { + shost_printk(KERN_ERR, shost, "%s: timed out\n", __func__); + scsi_unblock_requests(shost); + return 1; + } + + uas_free_streams(devinfo); + + return 0; +} + +static int uas_post_reset(struct usb_interface *intf) +{ + struct Scsi_Host *shost = usb_get_intfdata(intf); + struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata; + unsigned long flags; + int err; + + if (devinfo->shutdown) + return 0; + + err = uas_configure_endpoints(devinfo); + if (err) { + shost_printk(KERN_ERR, shost, + "%s: alloc streams error %d after reset", + __func__, err); + return 1; + } + + spin_lock_irqsave(shost->host_lock, flags); + scsi_report_bus_reset(shost, 0); + spin_unlock_irqrestore(shost->host_lock, flags); + + scsi_unblock_requests(shost); + + return 0; +} + +static int uas_suspend(struct usb_interface *intf, pm_message_t message) +{ + struct Scsi_Host *shost = usb_get_intfdata(intf); + struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata; + + if (uas_wait_for_pending_cmnds(devinfo) != 0) { + shost_printk(KERN_ERR, shost, "%s: timed out\n", __func__); + return -ETIME; + } + + return 0; +} + +static int uas_resume(struct usb_interface *intf) +{ + return 0; +} + +static int uas_reset_resume(struct usb_interface *intf) +{ + struct Scsi_Host *shost = usb_get_intfdata(intf); + struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata; + unsigned long flags; + int err; + + err = uas_configure_endpoints(devinfo); + if (err) { + shost_printk(KERN_ERR, shost, + "%s: alloc streams error %d after reset", + __func__, err); + return -EIO; + } + + spin_lock_irqsave(shost->host_lock, flags); + scsi_report_bus_reset(shost, 0); + spin_unlock_irqrestore(shost->host_lock, flags); + + return 0; +} + +static void uas_disconnect(struct usb_interface *intf) +{ + struct Scsi_Host *shost = usb_get_intfdata(intf); + struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata; + unsigned long flags; + + spin_lock_irqsave(&devinfo->lock, flags); + devinfo->resetting = 1; + spin_unlock_irqrestore(&devinfo->lock, flags); + + cancel_work_sync(&devinfo->work); + usb_kill_anchored_urbs(&devinfo->cmd_urbs); + usb_kill_anchored_urbs(&devinfo->sense_urbs); + usb_kill_anchored_urbs(&devinfo->data_urbs); + uas_zap_pending(devinfo, DID_NO_CONNECT); + + scsi_remove_host(shost); + uas_free_streams(devinfo); + scsi_host_put(shost); +} + +/* + * Put the device back in usb-storage mode on shutdown, as some BIOS-es + * hang on reboot when the device is still in uas mode. Note the reset is + * necessary as some devices won't revert to usb-storage mode without it. + */ +static void uas_shutdown(struct device *dev) +{ + struct usb_interface *intf = to_usb_interface(dev); + struct usb_device *udev = interface_to_usbdev(intf); + struct Scsi_Host *shost = usb_get_intfdata(intf); + struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata; + + if (system_state != SYSTEM_RESTART) + return; + + devinfo->shutdown = 1; + uas_free_streams(devinfo); + usb_set_interface(udev, intf->altsetting[0].desc.bInterfaceNumber, 0); + usb_reset_device(udev); +} + +static struct usb_driver uas_driver = { + .name = "uas", + .probe = uas_probe, + .disconnect = uas_disconnect, + .pre_reset = uas_pre_reset, + .post_reset = uas_post_reset, + .suspend = uas_suspend, + .resume = uas_resume, + .reset_resume = uas_reset_resume, + .drvwrap.driver.shutdown = uas_shutdown, + .id_table = uas_usb_ids, +}; + +module_usb_driver(uas_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR( + "Hans de Goede <hdegoede@redhat.com>, Matthew Wilcox and Sarah Sharp"); diff --git a/kernel/drivers/usb/storage/unusual_alauda.h b/kernel/drivers/usb/storage/unusual_alauda.h new file mode 100644 index 000000000..fa3e9edaa --- /dev/null +++ b/kernel/drivers/usb/storage/unusual_alauda.h @@ -0,0 +1,31 @@ +/* Unusual Devices File for the Alauda-based card readers + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#if defined(CONFIG_USB_STORAGE_ALAUDA) || \ + defined(CONFIG_USB_STORAGE_ALAUDA_MODULE) + +UNUSUAL_DEV( 0x0584, 0x0008, 0x0102, 0x0102, + "Fujifilm", + "DPC-R1 (Alauda)", + USB_SC_SCSI, USB_PR_ALAUDA, init_alauda, 0), + +UNUSUAL_DEV( 0x07b4, 0x010a, 0x0102, 0x0102, + "Olympus", + "MAUSB-10 (Alauda)", + USB_SC_SCSI, USB_PR_ALAUDA, init_alauda, 0), + +#endif /* defined(CONFIG_USB_STORAGE_ALAUDA) || ... */ diff --git a/kernel/drivers/usb/storage/unusual_cypress.h b/kernel/drivers/usb/storage/unusual_cypress.h new file mode 100644 index 000000000..82e8ed032 --- /dev/null +++ b/kernel/drivers/usb/storage/unusual_cypress.h @@ -0,0 +1,39 @@ +/* Unusual Devices File for devices based on the Cypress USB/ATA bridge + * with support for ATACB + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#if defined(CONFIG_USB_STORAGE_CYPRESS_ATACB) || \ + defined(CONFIG_USB_STORAGE_CYPRESS_ATACB_MODULE) + +/* CY7C68300 : support atacb */ +UNUSUAL_DEV( 0x04b4, 0x6830, 0x0000, 0x9999, + "Cypress", + "Cypress AT2LP", + USB_SC_CYP_ATACB, USB_PR_DEVICE, NULL, 0), + +/* CY7C68310 : support atacb and atacb2 */ +UNUSUAL_DEV( 0x04b4, 0x6831, 0x0000, 0x9999, + "Cypress", + "Cypress ISD-300LP", + USB_SC_CYP_ATACB, USB_PR_DEVICE, NULL, 0), + +UNUSUAL_DEV( 0x14cd, 0x6116, 0x0160, 0x0160, + "Super Top", + "USB 2.0 SATA BRIDGE", + USB_SC_CYP_ATACB, USB_PR_DEVICE, NULL, 0), + +#endif /* defined(CONFIG_USB_STORAGE_CYPRESS_ATACB) || ... */ diff --git a/kernel/drivers/usb/storage/unusual_datafab.h b/kernel/drivers/usb/storage/unusual_datafab.h new file mode 100644 index 000000000..582a603c7 --- /dev/null +++ b/kernel/drivers/usb/storage/unusual_datafab.h @@ -0,0 +1,98 @@ +/* Unusual Devices File for the Datafab USB Compact Flash reader + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#if defined(CONFIG_USB_STORAGE_DATAFAB) || \ + defined(CONFIG_USB_STORAGE_DATAFAB_MODULE) + +UNUSUAL_DEV( 0x07c4, 0xa000, 0x0000, 0x0015, + "Datafab", + "MDCFE-B USB CF Reader", + USB_SC_SCSI, USB_PR_DATAFAB, NULL, + 0), + +/* + * The following Datafab-based devices may or may not work + * using the current driver...the 0xffff is arbitrary since I + * don't know what device versions exist for these guys. + * + * The 0xa003 and 0xa004 devices in particular I'm curious about. + * I'm told they exist but so far nobody has come forward to say that + * they work with this driver. Given the success we've had getting + * other Datafab-based cards operational with this driver, I've decided + * to leave these two devices in the list. + */ +UNUSUAL_DEV( 0x07c4, 0xa001, 0x0000, 0xffff, + "SIIG/Datafab", + "SIIG/Datafab Memory Stick+CF Reader/Writer", + USB_SC_SCSI, USB_PR_DATAFAB, NULL, + 0), + +/* Reported by Josef Reisinger <josef.reisinger@netcologne.de> */ +UNUSUAL_DEV( 0x07c4, 0xa002, 0x0000, 0xffff, + "Datafab/Unknown", + "MD2/MD3 Disk enclosure", + USB_SC_SCSI, USB_PR_DATAFAB, NULL, + US_FL_SINGLE_LUN), + +UNUSUAL_DEV( 0x07c4, 0xa003, 0x0000, 0xffff, + "Datafab/Unknown", + "Datafab-based Reader", + USB_SC_SCSI, USB_PR_DATAFAB, NULL, + 0), + +UNUSUAL_DEV( 0x07c4, 0xa004, 0x0000, 0xffff, + "Datafab/Unknown", + "Datafab-based Reader", + USB_SC_SCSI, USB_PR_DATAFAB, NULL, + 0), + +UNUSUAL_DEV( 0x07c4, 0xa005, 0x0000, 0xffff, + "PNY/Datafab", + "PNY/Datafab CF+SM Reader", + USB_SC_SCSI, USB_PR_DATAFAB, NULL, + 0), + +UNUSUAL_DEV( 0x07c4, 0xa006, 0x0000, 0xffff, + "Simple Tech/Datafab", + "Simple Tech/Datafab CF+SM Reader", + USB_SC_SCSI, USB_PR_DATAFAB, NULL, + 0), + +/* Submitted by Olaf Hering <olh@suse.de> */ +UNUSUAL_DEV( 0x07c4, 0xa109, 0x0000, 0xffff, + "Datafab Systems, Inc.", + "USB to CF + SM Combo (LC1)", + USB_SC_SCSI, USB_PR_DATAFAB, NULL, + 0), + +/* Reported by Felix Moeller <felix@derklecks.de> + * in Germany this is sold by Hama with the productnumber 46952 + * as "DualSlot CompactFlash(TM) & MStick Drive USB" + */ +UNUSUAL_DEV( 0x07c4, 0xa10b, 0x0000, 0xffff, + "DataFab Systems Inc.", + "USB CF+MS", + USB_SC_SCSI, USB_PR_DATAFAB, NULL, + 0), + +UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff, + "Acomdata", + "CF", + USB_SC_SCSI, USB_PR_DATAFAB, NULL, + US_FL_SINGLE_LUN), + +#endif /* defined(CONFIG_USB_STORAGE_DATAFAB) || ... */ diff --git a/kernel/drivers/usb/storage/unusual_devs.h b/kernel/drivers/usb/storage/unusual_devs.h new file mode 100644 index 000000000..caf188800 --- /dev/null +++ b/kernel/drivers/usb/storage/unusual_devs.h @@ -0,0 +1,2215 @@ +/* Driver for USB Mass Storage compliant devices + * Unusual Devices File + * + * Current development and maintenance by: + * (c) 2000-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net) + * + * Initial work by: + * (c) 2000 Adam J. Richter (adam@yggdrasil.com), Yggdrasil Computing, Inc. + * + * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more + * information about this driver. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* IMPORTANT NOTE: This file must be included in another file which does + * the following thing for it to work: + * The UNUSUAL_DEV, COMPLIANT_DEV, and USUAL_DEV macros must be defined + * before this file is included. + */ + +/* If you edit this file, please try to keep it sorted first by VendorID, + * then by ProductID. + * + * If you want to add an entry for this file, be sure to include the + * following information: + * - a patch that adds the entry for your device, including your + * email address right above the entry (plus maybe a brief + * explanation of the reason for the entry), + * - a copy of /proc/bus/usb/devices with your device plugged in + * running with this patch. + * Send your submission to either Phil Dibowitz <phil@ipom.com> or + * Alan Stern <stern@rowland.harvard.edu>, and don't forget to CC: the + * USB development list <linux-usb@vger.kernel.org> and the USB storage list + * <usb-storage@lists.one-eyed-alien.net> + */ + +/* Note: If you add an entry only in order to set the CAPACITY_OK flag, + * use the COMPLIANT_DEV macro instead of UNUSUAL_DEV. This is + * because such entries mark devices which actually work correctly, + * as opposed to devices that do something strangely or wrongly. + */ + +/* In-kernel mode switching is deprecated. Do not add new devices to + * this list for the sole purpose of switching them to a different + * mode. Existing userspace solutions are superior. + * + * New mode switching devices should instead be added to the database + * maintained at http://www.draisberghof.de/usb_modeswitch/ + */ + +#if !defined(CONFIG_USB_STORAGE_SDDR09) && \ + !defined(CONFIG_USB_STORAGE_SDDR09_MODULE) +#define NO_SDDR09 +#endif + +/* patch submitted by Vivian Bregier <Vivian.Bregier@imag.fr> + */ +UNUSUAL_DEV( 0x03eb, 0x2002, 0x0100, 0x0100, + "ATMEL", + "SND1 Storage", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE), + +/* Reported by Rodolfo Quesada <rquesada@roqz.net> */ +UNUSUAL_DEV( 0x03ee, 0x6906, 0x0003, 0x0003, + "VIA Technologies Inc.", + "Mitsumi multi cardreader", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE ), + +UNUSUAL_DEV( 0x03f0, 0x0107, 0x0200, 0x0200, + "HP", + "CD-Writer+", + USB_SC_8070, USB_PR_CB, NULL, 0), + +/* Reported by Ben Efros <ben@pc-doctor.com> */ +UNUSUAL_DEV( 0x03f0, 0x070c, 0x0000, 0x0000, + "HP", + "Personal Media Drive", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_SANE_SENSE ), + +/* Reported by Grant Grundler <grundler@parisc-linux.org> + * HP r707 camera in "Disk" mode with 2.00.23 or 2.00.24 firmware. + */ +UNUSUAL_DEV( 0x03f0, 0x4002, 0x0001, 0x0001, + "HP", + "PhotoSmart R707", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_CAPACITY), + +UNUSUAL_DEV( 0x03f3, 0x0001, 0x0000, 0x9999, + "Adaptec", + "USBConnect 2000", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init, + US_FL_SCM_MULT_TARG ), + +/* Reported by Sebastian Kapfer <sebastian_kapfer@gmx.net> + * and Olaf Hering <olh@suse.de> (different bcd's, same vendor/product) + * for USB floppies that need the SINGLE_LUN enforcement. + */ +UNUSUAL_DEV( 0x0409, 0x0040, 0x0000, 0x9999, + "NEC", + "NEC USB UF000x", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_SINGLE_LUN ), + +/* Patch submitted by Mihnea-Costin Grigore <mihnea@zulu.ro> */ +UNUSUAL_DEV( 0x040d, 0x6205, 0x0003, 0x0003, + "VIA Technologies Inc.", + "USB 2.0 Card Reader", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE ), + +/* Deduced by Jonathan Woithe <jwoithe@just42.net> + * Entry needed for flags: US_FL_FIX_INQUIRY because initial inquiry message + * always fails and confuses drive. + */ +UNUSUAL_DEV( 0x0411, 0x001c, 0x0113, 0x0113, + "Buffalo", + "DUB-P40G HDD", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_FIX_INQUIRY ), + +/* Submitted by Ernestas Vaiciukevicius <ernisv@gmail.com> */ +UNUSUAL_DEV( 0x0419, 0x0100, 0x0100, 0x0100, + "Samsung Info. Systems America, Inc.", + "MP3 Player", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE ), + +/* Reported by Orgad Shaneh <orgads@gmail.com> */ +UNUSUAL_DEV( 0x0419, 0xaace, 0x0100, 0x0100, + "Samsung", "MP3 Player", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE ), + +/* Reported by Christian Leber <christian@leber.de> */ +UNUSUAL_DEV( 0x0419, 0xaaf5, 0x0100, 0x0100, + "TrekStor", + "i.Beat 115 2.0", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE | US_FL_NOT_LOCKABLE ), + +/* Reported by Stefan Werner <dustbln@gmx.de> */ +UNUSUAL_DEV( 0x0419, 0xaaf6, 0x0100, 0x0100, + "TrekStor", + "i.Beat Joy 2.0", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE ), + +/* Reported by Pete Zaitcev <zaitcev@redhat.com>, bz#176584 */ +UNUSUAL_DEV( 0x0420, 0x0001, 0x0100, 0x0100, + "GENERIC", "MP3 PLAYER", /* MyMusix PD-205 on the outside. */ + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE ), + +/* Reported by Andrew Nayenko <relan@bk.ru> + * Updated for new firmware by Phillip Potter <phillipinda@hotmail.com> */ +UNUSUAL_DEV( 0x0421, 0x0019, 0x0592, 0x0610, + "Nokia", + "Nokia 6288", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_MAX_SECTORS_64 ), + +/* Reported by Mario Rettig <mariorettig@web.de> */ +UNUSUAL_DEV( 0x0421, 0x042e, 0x0100, 0x0100, + "Nokia", + "Nokia 3250", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ), + +/* Reported by <honkkis@gmail.com> */ +UNUSUAL_DEV( 0x0421, 0x0433, 0x0100, 0x0100, + "Nokia", + "E70", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ), + +/* Reported by Jon Hart <Jon.Hart@web.de> */ +UNUSUAL_DEV( 0x0421, 0x0434, 0x0100, 0x0100, + "Nokia", + "E60", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ), + +/* Reported by Sumedha Swamy <sumedhaswamy@gmail.com> and + * Einar Th. Einarsson <einarthered@gmail.com> */ +UNUSUAL_DEV( 0x0421, 0x0444, 0x0100, 0x0100, + "Nokia", + "N91", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ), + +/* Reported by Jiri Slaby <jirislaby@gmail.com> and + * Rene C. Castberg <Rene@Castberg.org> */ +UNUSUAL_DEV( 0x0421, 0x0446, 0x0100, 0x0100, + "Nokia", + "N80", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ), + +/* Reported by Matthew Bloch <matthew@bytemark.co.uk> */ +UNUSUAL_DEV( 0x0421, 0x044e, 0x0100, 0x0100, + "Nokia", + "E61", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ), + +/* Reported by Bardur Arantsson <bardur@scientician.net> */ +UNUSUAL_DEV( 0x0421, 0x047c, 0x0370, 0x0610, + "Nokia", + "6131", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_MAX_SECTORS_64 ), + +/* Reported by Manuel Osdoba <manuel.osdoba@tu-ilmenau.de> */ +UNUSUAL_DEV( 0x0421, 0x0492, 0x0452, 0x9999, + "Nokia", + "Nokia 6233", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_MAX_SECTORS_64 ), + +/* Reported by Alex Corcoles <alex@corcoles.net> */ +UNUSUAL_DEV( 0x0421, 0x0495, 0x0370, 0x0370, + "Nokia", + "6234", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_MAX_SECTORS_64 ), + +/* Reported by Daniele Forsi <dforsi@gmail.com> */ +UNUSUAL_DEV( 0x0421, 0x04b9, 0x0350, 0x0350, + "Nokia", + "5300", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_MAX_SECTORS_64 ), + +/* Patch submitted by Victor A. Santos <victoraur.santos@gmail.com> */ +UNUSUAL_DEV( 0x0421, 0x05af, 0x0742, 0x0742, + "Nokia", + "305", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_MAX_SECTORS_64), + +/* Patch submitted by Mikhail Zolotaryov <lebon@lebon.org.ua> */ +UNUSUAL_DEV( 0x0421, 0x06aa, 0x1110, 0x1110, + "Nokia", + "502", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_MAX_SECTORS_64 ), + +#ifdef NO_SDDR09 +UNUSUAL_DEV( 0x0436, 0x0005, 0x0100, 0x0100, + "Microtech", + "CameraMate", + USB_SC_SCSI, USB_PR_CB, NULL, + US_FL_SINGLE_LUN ), +#endif + +/* Patch submitted by Daniel Drake <dsd@gentoo.org> + * Device reports nonsense bInterfaceProtocol 6 when connected over USB2 */ +UNUSUAL_DEV( 0x0451, 0x5416, 0x0100, 0x0100, + "Neuros Audio", + "USB 2.0 HD 2.5", + USB_SC_DEVICE, USB_PR_BULK, NULL, + US_FL_NEED_OVERRIDE ), + +/* + * Pete Zaitcev <zaitcev@yahoo.com>, from Patrick C. F. Ernzer, bz#162559. + * The key does not actually break, but it returns zero sense which + * makes our SCSI stack to print confusing messages. + */ +UNUSUAL_DEV( 0x0457, 0x0150, 0x0100, 0x0100, + "USBest Technology", /* sold by Transcend */ + "USB Mass Storage Device", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ), + +/* +* Bohdan Linda <bohdan.linda@gmail.com> +* 1GB USB sticks MyFlash High Speed. I have restricted +* the revision to my model only +*/ +UNUSUAL_DEV( 0x0457, 0x0151, 0x0100, 0x0100, + "USB 2.0", + "Flash Disk", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NOT_LOCKABLE ), + +/* Reported by Tamas Kerecsen <kerecsen@bigfoot.com> + * Obviously the PROM has not been customized by the VAR; + * the Vendor and Product string descriptors are: + * Generic Mass Storage (PROTOTYPE--Remember to change idVendor) + * Generic Manufacturer (PROTOTYPE--Remember to change idVendor) + */ +UNUSUAL_DEV( 0x045e, 0xffff, 0x0000, 0x0000, + "Mitac", + "GPS", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_MAX_SECTORS_64 ), + +/* + * This virtual floppy is found in Sun equipment (x4600, x4200m2, etc.) + * Reported by Pete Zaitcev <zaitcev@redhat.com> + * This device chokes on both version of MODE SENSE which we have, so + * use_10_for_ms is not effective, and we use US_FL_NO_WP_DETECT. + */ +UNUSUAL_DEV( 0x046b, 0xff40, 0x0100, 0x0100, + "AMI", + "Virtual Floppy", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NO_WP_DETECT), + +/* Patch submitted by Philipp Friedrich <philipp@void.at> */ +UNUSUAL_DEV( 0x0482, 0x0100, 0x0100, 0x0100, + "Kyocera", + "Finecam S3x", + USB_SC_8070, USB_PR_CB, NULL, US_FL_FIX_INQUIRY), + +/* Patch submitted by Philipp Friedrich <philipp@void.at> */ +UNUSUAL_DEV( 0x0482, 0x0101, 0x0100, 0x0100, + "Kyocera", + "Finecam S4", + USB_SC_8070, USB_PR_CB, NULL, US_FL_FIX_INQUIRY), + +/* Patch submitted by Stephane Galles <stephane.galles@free.fr> */ +UNUSUAL_DEV( 0x0482, 0x0103, 0x0100, 0x0100, + "Kyocera", + "Finecam S5", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_INQUIRY), + +/* Patch submitted by Jens Taprogge <jens.taprogge@taprogge.org> */ +UNUSUAL_DEV( 0x0482, 0x0107, 0x0100, 0x0100, + "Kyocera", + "CONTAX SL300R T*", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE), + +/* Reported by Paul Stewart <stewart@wetlogic.net> + * This entry is needed because the device reports Sub=ff */ +UNUSUAL_DEV( 0x04a4, 0x0004, 0x0001, 0x0001, + "Hitachi", + "DVD-CAM DZ-MV100A Camcorder", + USB_SC_SCSI, USB_PR_CB, NULL, US_FL_SINGLE_LUN), + +/* BENQ DC5330 + * Reported by Manuel Fombuena <mfombuena@ya.com> and + * Frank Copeland <fjc@thingy.apana.org.au> */ +UNUSUAL_DEV( 0x04a5, 0x3010, 0x0100, 0x0100, + "Tekom Technologies, Inc", + "300_CAMERA", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE ), + +/* Patch for Nikon coolpix 2000 + * Submitted by Fabien Cosse <fabien.cosse@wanadoo.fr>*/ +UNUSUAL_DEV( 0x04b0, 0x0301, 0x0010, 0x0010, + "NIKON", + "NIKON DSC E2000", + USB_SC_DEVICE, USB_PR_DEVICE,NULL, + US_FL_NOT_LOCKABLE ), + +/* Reported by Doug Maxey (dwm@austin.ibm.com) */ +UNUSUAL_DEV( 0x04b3, 0x4001, 0x0110, 0x0110, + "IBM", + "IBM RSA2", + USB_SC_DEVICE, USB_PR_CB, NULL, + US_FL_MAX_SECTORS_MIN), + +/* Reported by Simon Levitt <simon@whattf.com> + * This entry needs Sub and Proto fields */ +UNUSUAL_DEV( 0x04b8, 0x0601, 0x0100, 0x0100, + "Epson", + "875DC Storage", + USB_SC_SCSI, USB_PR_CB, NULL, US_FL_FIX_INQUIRY), + +/* Reported by Khalid Aziz <khalid@gonehiking.org> + * This entry is needed because the device reports Sub=ff */ +UNUSUAL_DEV( 0x04b8, 0x0602, 0x0110, 0x0110, + "Epson", + "785EPX Storage", + USB_SC_SCSI, USB_PR_BULK, NULL, US_FL_SINGLE_LUN), + +/* Not sure who reported this originally but + * Pavel Machek <pavel@ucw.cz> reported that the extra US_FL_SINGLE_LUN + * flag be added */ +UNUSUAL_DEV( 0x04cb, 0x0100, 0x0000, 0x2210, + "Fujifilm", + "FinePix 1400Zoom", + USB_SC_UFI, USB_PR_DEVICE, NULL, US_FL_FIX_INQUIRY | US_FL_SINGLE_LUN), + +/* Reported by Ondrej Zary <linux@rainbow-software.org> + * The device reports one sector more and breaks when that sector is accessed + */ +UNUSUAL_DEV( 0x04ce, 0x0002, 0x026c, 0x026c, + "ScanLogic", + "SL11R-IDE", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY), + +/* Reported by Kriston Fincher <kriston@airmail.net> + * Patch submitted by Sean Millichamp <sean@bruenor.org> + * This is to support the Panasonic PalmCam PV-SD4090 + * This entry is needed because the device reports Sub=ff + */ +UNUSUAL_DEV( 0x04da, 0x0901, 0x0100, 0x0200, + "Panasonic", + "LS-120 Camera", + USB_SC_UFI, USB_PR_DEVICE, NULL, 0), + +/* From Yukihiro Nakai, via zaitcev@yahoo.com. + * This is needed for CB instead of CBI */ +UNUSUAL_DEV( 0x04da, 0x0d05, 0x0000, 0x0000, + "Sharp CE-CW05", + "CD-R/RW Drive", + USB_SC_8070, USB_PR_CB, NULL, 0), + +/* Reported by Adriaan Penning <a.penning@luon.net> */ +UNUSUAL_DEV( 0x04da, 0x2372, 0x0000, 0x9999, + "Panasonic", + "DMC-LCx Camera", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ), + +/* Reported by Simeon Simeonov <simeonov_2000@yahoo.com> */ +UNUSUAL_DEV( 0x04da, 0x2373, 0x0000, 0x9999, + "LEICA", + "D-LUX Camera", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ), + +/* Most of the following entries were developed with the help of + * Shuttle/SCM directly. + */ +UNUSUAL_DEV( 0x04e6, 0x0001, 0x0200, 0x0200, + "Matshita", + "LS-120", + USB_SC_8020, USB_PR_CB, NULL, 0), + +UNUSUAL_DEV( 0x04e6, 0x0002, 0x0100, 0x0100, + "Shuttle", + "eUSCSI Bridge", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init, + US_FL_SCM_MULT_TARG ), + +#ifdef NO_SDDR09 +UNUSUAL_DEV( 0x04e6, 0x0005, 0x0100, 0x0208, + "SCM Microsystems", + "eUSB CompactFlash Adapter", + USB_SC_SCSI, USB_PR_CB, NULL, + US_FL_SINGLE_LUN), +#endif + +/* Reported by Markus Demleitner <msdemlei@cl.uni-heidelberg.de> */ +UNUSUAL_DEV( 0x04e6, 0x0006, 0x0100, 0x0100, + "SCM Microsystems Inc.", + "eUSB MMC Adapter", + USB_SC_SCSI, USB_PR_CB, NULL, + US_FL_SINGLE_LUN), + +/* Reported by Daniel Nouri <dpunktnpunkt@web.de> */ +UNUSUAL_DEV( 0x04e6, 0x0006, 0x0205, 0x0205, + "Shuttle", + "eUSB MMC Adapter", + USB_SC_SCSI, USB_PR_DEVICE, NULL, + US_FL_SINGLE_LUN), + +UNUSUAL_DEV( 0x04e6, 0x0007, 0x0100, 0x0200, + "Sony", + "Hifd", + USB_SC_SCSI, USB_PR_CB, NULL, + US_FL_SINGLE_LUN), + +UNUSUAL_DEV( 0x04e6, 0x0009, 0x0200, 0x0200, + "Shuttle", + "eUSB ATA/ATAPI Adapter", + USB_SC_8020, USB_PR_CB, NULL, 0), + +UNUSUAL_DEV( 0x04e6, 0x000a, 0x0200, 0x0200, + "Shuttle", + "eUSB CompactFlash Adapter", + USB_SC_8020, USB_PR_CB, NULL, 0), + +UNUSUAL_DEV( 0x04e6, 0x000b, 0x0100, 0x0100, + "Shuttle", + "eUSCSI Bridge", + USB_SC_SCSI, USB_PR_BULK, usb_stor_euscsi_init, + US_FL_SCM_MULT_TARG ), + +UNUSUAL_DEV( 0x04e6, 0x000c, 0x0100, 0x0100, + "Shuttle", + "eUSCSI Bridge", + USB_SC_SCSI, USB_PR_BULK, usb_stor_euscsi_init, + US_FL_SCM_MULT_TARG ), + +UNUSUAL_DEV( 0x04e6, 0x000f, 0x0000, 0x9999, + "SCM Microsystems", + "eUSB SCSI Adapter (Bus Powered)", + USB_SC_SCSI, USB_PR_BULK, usb_stor_euscsi_init, + US_FL_SCM_MULT_TARG ), + +UNUSUAL_DEV( 0x04e6, 0x0101, 0x0200, 0x0200, + "Shuttle", + "CD-RW Device", + USB_SC_8020, USB_PR_CB, NULL, 0), + +/* Reported by Dmitry Khlystov <adminimus@gmail.com> */ +UNUSUAL_DEV( 0x04e8, 0x507c, 0x0220, 0x0220, + "Samsung", + "YP-U3", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_MAX_SECTORS_64), + +/* Reported by Vitaly Kuznetsov <vitty@altlinux.ru> */ +UNUSUAL_DEV( 0x04e8, 0x5122, 0x0000, 0x9999, + "Samsung", + "YP-CP3", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_MAX_SECTORS_64 | US_FL_BULK_IGNORE_TAG), + +/* Added by Dmitry Artamonow <mad_soft@inbox.ru> */ +UNUSUAL_DEV( 0x04e8, 0x5136, 0x0000, 0x9999, + "Samsung", + "YP-Z3", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_MAX_SECTORS_64), + +/* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>. + * Device uses standards-violating 32-byte Bulk Command Block Wrappers and + * reports itself as "Proprietary SCSI Bulk." Cf. device entry 0x084d:0x0011. + */ +UNUSUAL_DEV( 0x04fc, 0x80c2, 0x0100, 0x0100, + "Kobian Mercury", + "Binocam DCB-132", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_BULK32), + +/* Reported by Bob Sass <rls@vectordb.com> -- only rev 1.33 tested */ +UNUSUAL_DEV( 0x050d, 0x0115, 0x0133, 0x0133, + "Belkin", + "USB SCSI Adaptor", + USB_SC_SCSI, USB_PR_BULK, usb_stor_euscsi_init, + US_FL_SCM_MULT_TARG ), + +/* Iomega Clik! Drive + * Reported by David Chatenay <dchatenay@hotmail.com> + * The reason this is needed is not fully known. + */ +UNUSUAL_DEV( 0x0525, 0xa140, 0x0100, 0x0100, + "Iomega", + "USB Clik! 40", + USB_SC_8070, USB_PR_DEVICE, NULL, + US_FL_FIX_INQUIRY ), + +/* Added by Alan Stern <stern@rowland.harvard.edu> */ +COMPLIANT_DEV(0x0525, 0xa4a5, 0x0000, 0x9999, + "Linux", + "File-backed Storage Gadget", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_CAPACITY_OK ), + +/* Yakumo Mega Image 37 + * Submitted by Stephan Fuhrmann <atomenergie@t-online.de> */ +UNUSUAL_DEV( 0x052b, 0x1801, 0x0100, 0x0100, + "Tekom Technologies, Inc", + "300_CAMERA", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE ), + +/* Another Yakumo camera. + * Reported by Michele Alzetta <michele.alzetta@aliceposta.it> */ +UNUSUAL_DEV( 0x052b, 0x1804, 0x0100, 0x0100, + "Tekom Technologies, Inc", + "300_CAMERA", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE ), + +/* Reported by Iacopo Spalletti <avvisi@spalletti.it> */ +UNUSUAL_DEV( 0x052b, 0x1807, 0x0100, 0x0100, + "Tekom Technologies, Inc", + "300_CAMERA", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE ), + +/* Yakumo Mega Image 47 + * Reported by Bjoern Paetzel <kolrabi@kolrabi.de> */ +UNUSUAL_DEV( 0x052b, 0x1905, 0x0100, 0x0100, + "Tekom Technologies, Inc", + "400_CAMERA", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE ), + +/* Reported by Paul Ortyl <ortylp@3miasto.net> + * Note that it's similar to the device above, only different prodID */ +UNUSUAL_DEV( 0x052b, 0x1911, 0x0100, 0x0100, + "Tekom Technologies, Inc", + "400_CAMERA", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE ), + +UNUSUAL_DEV( 0x054c, 0x0010, 0x0106, 0x0450, + "Sony", + "DSC-S30/S70/S75/505V/F505/F707/F717/P8", + USB_SC_SCSI, USB_PR_DEVICE, NULL, + US_FL_SINGLE_LUN | US_FL_NOT_LOCKABLE | US_FL_NO_WP_DETECT ), + +/* Submitted by Lars Jacob <jacob.lars@googlemail.com> + * This entry is needed because the device reports Sub=ff */ +UNUSUAL_DEV( 0x054c, 0x0010, 0x0500, 0x0610, + "Sony", + "DSC-T1/T5/H5", + USB_SC_8070, USB_PR_DEVICE, NULL, + US_FL_SINGLE_LUN ), + + +/* Reported by wim@geeks.nl */ +UNUSUAL_DEV( 0x054c, 0x0025, 0x0100, 0x0100, + "Sony", + "Memorystick NW-MS7", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_SINGLE_LUN ), + +/* Submitted by Olaf Hering, <olh@suse.de> SuSE Bugzilla #49049 */ +UNUSUAL_DEV( 0x054c, 0x002c, 0x0501, 0x2000, + "Sony", + "USB Floppy Drive", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_SINGLE_LUN ), + +UNUSUAL_DEV( 0x054c, 0x002d, 0x0100, 0x0100, + "Sony", + "Memorystick MSAC-US1", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_SINGLE_LUN ), + +/* Submitted by Klaus Mueller <k.mueller@intershop.de> */ +UNUSUAL_DEV( 0x054c, 0x002e, 0x0106, 0x0310, + "Sony", + "Handycam", + USB_SC_SCSI, USB_PR_DEVICE, NULL, + US_FL_SINGLE_LUN ), + +/* Submitted by Rajesh Kumble Nayak <nayak@obs-nice.fr> */ +UNUSUAL_DEV( 0x054c, 0x002e, 0x0500, 0x0500, + "Sony", + "Handycam HC-85", + USB_SC_UFI, USB_PR_DEVICE, NULL, + US_FL_SINGLE_LUN ), + +UNUSUAL_DEV( 0x054c, 0x0032, 0x0000, 0x9999, + "Sony", + "Memorystick MSC-U01N", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_SINGLE_LUN ), + +/* Submitted by Michal Mlotek <mlotek@foobar.pl> */ +UNUSUAL_DEV( 0x054c, 0x0058, 0x0000, 0x9999, + "Sony", + "PEG N760c Memorystick", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_FIX_INQUIRY ), + +UNUSUAL_DEV( 0x054c, 0x0069, 0x0000, 0x9999, + "Sony", + "Memorystick MSC-U03", + USB_SC_UFI, USB_PR_CB, NULL, + US_FL_SINGLE_LUN ), + +/* Submitted by Nathan Babb <nathan@lexi.com> */ +UNUSUAL_DEV( 0x054c, 0x006d, 0x0000, 0x9999, + "Sony", + "PEG Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_FIX_INQUIRY ), + +/* Submitted by Frank Engel <frankie@cse.unsw.edu.au> */ +UNUSUAL_DEV( 0x054c, 0x0099, 0x0000, 0x9999, + "Sony", + "PEG Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_FIX_INQUIRY ), + +/* Submitted by Mike Alborn <malborn@deandra.homeip.net> */ +UNUSUAL_DEV( 0x054c, 0x016a, 0x0000, 0x9999, + "Sony", + "PEG Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_FIX_INQUIRY ), + +/* Submitted by Ren Bigcren <bigcren.ren@sonymobile.com> */ +UNUSUAL_DEV( 0x054c, 0x02a5, 0x0100, 0x0100, + "Sony Corp.", + "MicroVault Flash Drive", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NO_READ_CAPACITY_16 ), + +/* floppy reports multiple luns */ +UNUSUAL_DEV( 0x055d, 0x2020, 0x0000, 0x0210, + "SAMSUNG", + "SFD-321U [FW 0C]", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_SINGLE_LUN ), + +/* We keep this entry to force the transport; firmware 3.00 and later is ok. */ +UNUSUAL_DEV( 0x057b, 0x0000, 0x0000, 0x0299, + "Y-E Data", + "Flashbuster-U", + USB_SC_DEVICE, USB_PR_CB, NULL, + US_FL_SINGLE_LUN), + +/* Reported by Johann Cardon <johann.cardon@free.fr> + * This entry is needed only because the device reports + * bInterfaceClass = 0xff (vendor-specific) + */ +UNUSUAL_DEV( 0x057b, 0x0022, 0x0000, 0x9999, + "Y-E Data", + "Silicon Media R/W", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, 0), + +/* Reported by RTE <raszilki@yandex.ru> */ +UNUSUAL_DEV( 0x058f, 0x6387, 0x0141, 0x0141, + "JetFlash", + "TS1GJF2A/120", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_MAX_SECTORS_64 ), + +/* Fabrizio Fellini <fello@libero.it> */ +UNUSUAL_DEV( 0x0595, 0x4343, 0x0000, 0x2210, + "Fujifilm", + "Digital Camera EX-20 DSC", + USB_SC_8070, USB_PR_DEVICE, NULL, 0 ), + +/* Reported by Andre Welter <a.r.welter@gmx.de> + * This antique device predates the release of the Bulk-only Transport + * spec, and if it gets a Get-Max-LUN then it requires the host to do a + * Clear-Halt on the bulk endpoints. The SINGLE_LUN flag will prevent + * us from sending the request. + */ +UNUSUAL_DEV( 0x059b, 0x0001, 0x0100, 0x0100, + "Iomega", + "ZIP 100", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_SINGLE_LUN ), + +UNUSUAL_DEV( 0x059b, 0x0040, 0x0100, 0x0100, + "Iomega", + "Jaz USB Adapter", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_SINGLE_LUN ), + +/* Reported by <Hendryk.Pfeiffer@gmx.de> */ +UNUSUAL_DEV( 0x059f, 0x0643, 0x0000, 0x0000, + "LaCie", + "DVD+-RW", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_GO_SLOW ), + +/* Reported by Christian Schaller <cschalle@redhat.com> */ +UNUSUAL_DEV( 0x059f, 0x0651, 0x0000, 0x0000, + "LaCie", + "External HDD", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NO_WP_DETECT ), + +/* Submitted by Joel Bourquard <numlock@freesurf.ch> + * Some versions of this device need the SubClass and Protocol overrides + * while others don't. + */ +UNUSUAL_DEV( 0x05ab, 0x0060, 0x1104, 0x1110, + "In-System", + "PyroGate External CD-ROM Enclosure (FCD-523)", + USB_SC_SCSI, USB_PR_BULK, NULL, + US_FL_NEED_OVERRIDE ), + +/* Submitted by Sven Anderson <sven-linux@anderson.de> + * There are at least four ProductIDs used for iPods, so I added 0x1202 and + * 0x1204. They just need the US_FL_FIX_CAPACITY. As the bcdDevice appears + * to change with firmware updates, I changed the range to maximum for all + * iPod entries. + */ +UNUSUAL_DEV( 0x05ac, 0x1202, 0x0000, 0x9999, + "Apple", + "iPod", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY ), + +/* Reported by Avi Kivity <avi@argo.co.il> */ +UNUSUAL_DEV( 0x05ac, 0x1203, 0x0000, 0x9999, + "Apple", + "iPod", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY ), + +UNUSUAL_DEV( 0x05ac, 0x1204, 0x0000, 0x9999, + "Apple", + "iPod", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ), + +UNUSUAL_DEV( 0x05ac, 0x1205, 0x0000, 0x9999, + "Apple", + "iPod", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY ), + +/* + * Reported by Tyson Vinson <lornoss@gmail.com> + * This particular productId is the iPod Nano + */ +UNUSUAL_DEV( 0x05ac, 0x120a, 0x0000, 0x9999, + "Apple", + "iPod", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY ), + +/* Reported by Dan Williams <dcbw@redhat.com> + * Option N.V. mobile broadband modems + * Ignore driver CD mode and force into modem mode by default. + */ + +/* Globetrotter HSDPA; mass storage shows up as Qualcomm for vendor */ +UNUSUAL_DEV( 0x05c6, 0x1000, 0x0000, 0x9999, + "Option N.V.", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, option_ms_init, + 0), + +/* Reported by Blake Matheny <bmatheny@purdue.edu> */ +UNUSUAL_DEV( 0x05dc, 0xb002, 0x0000, 0x0113, + "Lexar", + "USB CF Reader", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_FIX_INQUIRY ), + +/* The following two entries are for a Genesys USB to IDE + * converter chip, but it changes its ProductId depending + * on whether or not a disk or an optical device is enclosed + * They were originally reported by Alexander Oltu + * <alexander@all-2.com> and Peter Marks <peter.marks@turner.com> + * respectively. + * + * US_FL_GO_SLOW and US_FL_MAX_SECTORS_64 added by Phil Dibowitz + * <phil@ipom.com> as these flags were made and hard-coded + * special-cases were pulled from scsiglue.c. + */ +UNUSUAL_DEV( 0x05e3, 0x0701, 0x0000, 0xffff, + "Genesys Logic", + "USB to IDE Optical", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 | US_FL_IGNORE_RESIDUE ), + +UNUSUAL_DEV( 0x05e3, 0x0702, 0x0000, 0xffff, + "Genesys Logic", + "USB to IDE Disk", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 | US_FL_IGNORE_RESIDUE ), + +/* Reported by Ben Efros <ben@pc-doctor.com> */ +UNUSUAL_DEV( 0x05e3, 0x0723, 0x9451, 0x9451, + "Genesys Logic", + "USB to SATA", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_SANE_SENSE ), + +/* Reported by Hanno Boeck <hanno@gmx.de> + * Taken from the Lycoris Kernel */ +UNUSUAL_DEV( 0x0636, 0x0003, 0x0000, 0x9999, + "Vivitar", + "Vivicam 35Xx", + USB_SC_SCSI, USB_PR_BULK, NULL, + US_FL_FIX_INQUIRY ), + +UNUSUAL_DEV( 0x0644, 0x0000, 0x0100, 0x0100, + "TEAC", + "Floppy Drive", + USB_SC_UFI, USB_PR_CB, NULL, 0 ), + +/* Reported by Darsen Lu <darsen@micro.ee.nthu.edu.tw> */ +UNUSUAL_DEV( 0x066f, 0x8000, 0x0001, 0x0001, + "SigmaTel", + "USBMSC Audio Player", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY ), + +/* Reported by Daniel Kukula <daniel.kuku@gmail.com> */ +UNUSUAL_DEV( 0x067b, 0x1063, 0x0100, 0x0100, + "Prolific Technology, Inc.", + "Prolific Storage Gadget", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_BAD_SENSE ), + +/* Reported by Rogerio Brito <rbrito@ime.usp.br> */ +UNUSUAL_DEV( 0x067b, 0x2317, 0x0001, 0x001, + "Prolific Technology, Inc.", + "Mass Storage Device", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NOT_LOCKABLE ), + +/* Reported by Richard -=[]=- <micro_flyer@hotmail.com> */ +/* Change to bcdDeviceMin (0x0100 to 0x0001) reported by + * Thomas Bartosik <tbartdev@gmx-topmail.de> */ +UNUSUAL_DEV( 0x067b, 0x2507, 0x0001, 0x0100, + "Prolific Technology Inc.", + "Mass Storage Device", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY | US_FL_GO_SLOW ), + +/* Reported by Alex Butcher <alex.butcher@assursys.co.uk> */ +UNUSUAL_DEV( 0x067b, 0x3507, 0x0001, 0x0101, + "Prolific Technology Inc.", + "ATAPI-6 Bridge Controller", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY | US_FL_GO_SLOW ), + +/* Submitted by Benny Sjostrand <benny@hostmobility.com> */ +UNUSUAL_DEV( 0x0686, 0x4011, 0x0001, 0x0001, + "Minolta", + "Dimage F300", + USB_SC_SCSI, USB_PR_BULK, NULL, 0 ), + +/* Reported by Miguel A. Fosas <amn3s1a@ono.com> */ +UNUSUAL_DEV( 0x0686, 0x4017, 0x0001, 0x0001, + "Minolta", + "DIMAGE E223", + USB_SC_SCSI, USB_PR_DEVICE, NULL, 0 ), + +UNUSUAL_DEV( 0x0693, 0x0005, 0x0100, 0x0100, + "Hagiwara", + "Flashgate", + USB_SC_SCSI, USB_PR_BULK, NULL, 0 ), + +/* Reported by David Hamilton <niftimusmaximus@lycos.com> */ +UNUSUAL_DEV( 0x069b, 0x3004, 0x0001, 0x0001, + "Thomson Multimedia Inc.", + "RCA RD1080 MP3 Player", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY ), + +UNUSUAL_DEV( 0x06ca, 0x2003, 0x0100, 0x0100, + "Newer Technology", + "uSCSI", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init, + US_FL_SCM_MULT_TARG ), + +/* Reported by Adrian Pilchowiec <adi1981@epf.pl> */ +UNUSUAL_DEV( 0x071b, 0x3203, 0x0000, 0x0000, + "RockChip", + "MP3", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64 | + US_FL_NO_READ_CAPACITY_16), + +/* Reported by Jean-Baptiste Onofre <jb@nanthrax.net> + * Support the following product : + * "Dane-Elec MediaTouch" + */ +UNUSUAL_DEV( 0x071b, 0x32bb, 0x0000, 0x0000, + "RockChip", + "MTP", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64), + +/* Reported by Massimiliano Ghilardi <massimiliano.ghilardi@gmail.com> + * This USB MP3/AVI player device fails and disconnects if more than 128 + * sectors (64kB) are read/written in a single command, and may be present + * at least in the following products: + * "Magnex Digital Video Panel DVP 1800" + * "MP4 AIGO 4GB SLOT SD" + * "Teclast TL-C260 MP3" + * "i.Meizu PMP MP3/MP4" + * "Speed MV8 MP4 Audio Player" + */ +UNUSUAL_DEV( 0x071b, 0x3203, 0x0100, 0x0100, + "RockChip", + "ROCK MP3", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_MAX_SECTORS_64), + +/* Reported by Olivier Blondeau <zeitoun@gmail.com> */ +UNUSUAL_DEV( 0x0727, 0x0306, 0x0100, 0x0100, + "ATMEL", + "SND1 Storage", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE), + +/* Submitted by Roman Hodek <roman@hodek.net> */ +UNUSUAL_DEV( 0x0781, 0x0001, 0x0200, 0x0200, + "Sandisk", + "ImageMate SDDR-05a", + USB_SC_SCSI, USB_PR_CB, NULL, + US_FL_SINGLE_LUN ), + +UNUSUAL_DEV( 0x0781, 0x0002, 0x0009, 0x0009, + "SanDisk Corporation", + "ImageMate CompactFlash USB", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY ), + +UNUSUAL_DEV( 0x0781, 0x0100, 0x0100, 0x0100, + "Sandisk", + "ImageMate SDDR-12", + USB_SC_SCSI, USB_PR_CB, NULL, + US_FL_SINGLE_LUN ), + +/* Reported by Eero Volotinen <eero@ping-viini.org> */ +UNUSUAL_DEV( 0x07ab, 0xfccd, 0x0000, 0x9999, + "Freecom Technologies", + "FHD-Classic", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY), + +UNUSUAL_DEV( 0x07af, 0x0004, 0x0100, 0x0133, + "Microtech", + "USB-SCSI-DB25", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init, + US_FL_SCM_MULT_TARG ), + +UNUSUAL_DEV( 0x07af, 0x0005, 0x0100, 0x0100, + "Microtech", + "USB-SCSI-HD50", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init, + US_FL_SCM_MULT_TARG ), + +#ifdef NO_SDDR09 +UNUSUAL_DEV( 0x07af, 0x0006, 0x0100, 0x0100, + "Microtech", + "CameraMate", + USB_SC_SCSI, USB_PR_CB, NULL, + US_FL_SINGLE_LUN ), +#endif + +/* Datafab KECF-USB / Sagatek DCS-CF / Simpletech Flashlink UCF-100 + * Only revision 1.13 tested (same for all of the above devices, + * based on the Datafab DF-UG-07 chip). Needed for US_FL_FIX_INQUIRY. + * Submitted by Marek Michalkiewicz <marekm@amelek.gda.pl>. + * See also http://martin.wilck.bei.t-online.de/#kecf . + */ +UNUSUAL_DEV( 0x07c4, 0xa400, 0x0000, 0xffff, + "Datafab", + "KECF-USB", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_FIX_INQUIRY | US_FL_FIX_CAPACITY ), + +/* Reported by Rauch Wolke <rauchwolke@gmx.net> + * and augmented by binbin <binbinsh@gmail.com> (Bugzilla #12882) + */ +UNUSUAL_DEV( 0x07c4, 0xa4a5, 0x0000, 0xffff, + "Simple Tech/Datafab", + "CF+SM Reader", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE | US_FL_MAX_SECTORS_64 ), + +/* Casio QV 2x00/3x00/4000/8000 digital still cameras are not conformant + * to the USB storage specification in two ways: + * - They tell us they are using transport protocol CBI. In reality they + * are using transport protocol CB. + * - They don't like the INQUIRY command. So we must handle this command + * of the SCSI layer ourselves. + * - Some cameras with idProduct=0x1001 and bcdDevice=0x1000 have + * bInterfaceProtocol=0x00 (USB_PR_CBI) while others have 0x01 (USB_PR_CB). + * So don't remove the USB_PR_CB override! + * - Cameras with bcdDevice=0x9009 require the USB_SC_8070 override. + */ +UNUSUAL_DEV( 0x07cf, 0x1001, 0x1000, 0x9999, + "Casio", + "QV DigitalCamera", + USB_SC_8070, USB_PR_CB, NULL, + US_FL_NEED_OVERRIDE | US_FL_FIX_INQUIRY ), + +/* Submitted by Oleksandr Chumachenko <ledest@gmail.com> */ +UNUSUAL_DEV( 0x07cf, 0x1167, 0x0100, 0x0100, + "Casio", + "EX-N1 DigitalCamera", + USB_SC_8070, USB_PR_DEVICE, NULL, 0), + +/* Submitted by Hartmut Wahl <hwahl@hwahl.de>*/ +UNUSUAL_DEV( 0x0839, 0x000a, 0x0001, 0x0001, + "Samsung", + "Digimax 410", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_FIX_INQUIRY), + +/* Reported by Luciano Rocha <luciano@eurotux.com> */ +UNUSUAL_DEV( 0x0840, 0x0082, 0x0001, 0x0001, + "Argosy", + "Storage", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY), + +/* Reported and patched by Nguyen Anh Quynh <aquynh@gmail.com> */ +UNUSUAL_DEV( 0x0840, 0x0084, 0x0001, 0x0001, + "Argosy", + "Storage", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY), + +/* Reported by Martijn Hijdra <martijn.hijdra@gmail.com> */ +UNUSUAL_DEV( 0x0840, 0x0085, 0x0001, 0x0001, + "Argosy", + "Storage", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY), + +/* Supplied with some Castlewood ORB removable drives */ +UNUSUAL_DEV( 0x084b, 0xa001, 0x0000, 0x9999, + "Castlewood Systems", + "USB to SCSI cable", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init, + US_FL_SCM_MULT_TARG ), + +/* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>. + * Flag will support Bulk devices which use a standards-violating 32-byte + * Command Block Wrapper. Here, the "DC2MEGA" cameras (several brands) with + * Grandtech GT892x chip, which request "Proprietary SCSI Bulk" support. + */ + +UNUSUAL_DEV( 0x084d, 0x0011, 0x0110, 0x0110, + "Grandtech", + "DC2MEGA", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_BULK32), + +/* Reported by <ttkspam@free.fr> + * The device reports a vendor-specific device class, requiring an + * explicit vendor/product match. + */ +UNUSUAL_DEV( 0x0851, 0x1542, 0x0002, 0x0002, + "MagicPixel", + "FW_Omega2", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, 0), + +/* Andrew Lunn <andrew@lunn.ch> + * PanDigital Digital Picture Frame. Does not like ALLOW_MEDIUM_REMOVAL + * on LUN 4. + * Note: Vend:Prod clash with "Ltd Maxell WS30 Slim Digital Camera" +*/ +UNUSUAL_DEV( 0x0851, 0x1543, 0x0200, 0x0200, + "PanDigital", + "Photo Frame", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NOT_LOCKABLE), + +UNUSUAL_DEV( 0x085a, 0x0026, 0x0100, 0x0133, + "Xircom", + "PortGear USB-SCSI (Mac USB Dock)", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init, + US_FL_SCM_MULT_TARG ), + +UNUSUAL_DEV( 0x085a, 0x0028, 0x0100, 0x0133, + "Xircom", + "PortGear USB to SCSI Converter", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init, + US_FL_SCM_MULT_TARG ), + +/* Submitted by Jan De Luyck <lkml@kcore.org> */ +UNUSUAL_DEV( 0x08bd, 0x1100, 0x0000, 0x0000, + "CITIZEN", + "X1DE-USB", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_SINGLE_LUN), + +/* Submitted by Dylan Taft <d13f00l@gmail.com> + * US_FL_IGNORE_RESIDUE Needed + */ +UNUSUAL_DEV( 0x08ca, 0x3103, 0x0100, 0x0100, + "AIPTEK", + "Aiptek USB Keychain MP3 Player", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE), + +/* Entry needed for flags. Moreover, all devices with this ID use + * bulk-only transport, but _some_ falsely report Control/Bulk instead. + * One example is "Trumpion Digital Research MYMP3". + * Submitted by Bjoern Brill <brill(at)fs.math.uni-frankfurt.de> + */ +UNUSUAL_DEV( 0x090a, 0x1001, 0x0100, 0x0100, + "Trumpion", + "t33520 USB Flash Card Controller", + USB_SC_DEVICE, USB_PR_BULK, NULL, + US_FL_NEED_OVERRIDE ), + +/* Reported by Filippo Bardelli <filibard@libero.it> + * The device reports a subclass of RBC, which is wrong. + */ +UNUSUAL_DEV( 0x090a, 0x1050, 0x0100, 0x0100, + "Trumpion Microelectronics, Inc.", + "33520 USB Digital Voice Recorder", + USB_SC_UFI, USB_PR_DEVICE, NULL, + 0), + +/* Trumpion Microelectronics MP3 player (felipe_alfaro@linuxmail.org) */ +UNUSUAL_DEV( 0x090a, 0x1200, 0x0000, 0x9999, + "Trumpion", + "MP3 player", + USB_SC_RBC, USB_PR_BULK, NULL, + 0 ), + +/* aeb */ +UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff, + "Feiya", + "5-in-1 Card Reader", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY ), + +/* Reported by Paul Hartman <paul.hartman+linux@gmail.com> + * This card reader returns "Illegal Request, Logical Block Address + * Out of Range" for the first READ(10) after a new card is inserted. + */ +UNUSUAL_DEV( 0x090c, 0x6000, 0x0100, 0x0100, + "Feiya", + "SD/SDHC Card Reader", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_INITIAL_READ10 ), + +/* This Pentax still camera is not conformant + * to the USB storage specification: - + * - It does not like the INQUIRY command. So we must handle this command + * of the SCSI layer ourselves. + * Tested on Rev. 10.00 (0x1000) + * Submitted by James Courtier-Dutton <James@superbug.demon.co.uk> + */ +UNUSUAL_DEV( 0x0a17, 0x0004, 0x1000, 0x1000, + "Pentax", + "Optio 2/3/400", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_FIX_INQUIRY ), + +/* These are virtual windows driver CDs, which the zd1211rw driver + * automatically converts into WLAN devices. */ +UNUSUAL_DEV( 0x0ace, 0x2011, 0x0101, 0x0101, + "ZyXEL", + "G-220F USB-WLAN Install", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_DEVICE ), + +UNUSUAL_DEV( 0x0ace, 0x20ff, 0x0101, 0x0101, + "SiteCom", + "WL-117 USB-WLAN Install", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_DEVICE ), + +/* Reported by Dan Williams <dcbw@redhat.com> + * Option N.V. mobile broadband modems + * Ignore driver CD mode and force into modem mode by default. + */ + +/* iCON 225 */ +UNUSUAL_DEV( 0x0af0, 0x6971, 0x0000, 0x9999, + "Option N.V.", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, option_ms_init, + 0), + +/* Reported by F. Aben <f.aben@option.com> + * This device (wrongly) has a vendor-specific device descriptor. + * The entry is needed so usb-storage can bind to it's mass-storage + * interface as an interface driver */ +UNUSUAL_DEV( 0x0af0, 0x7401, 0x0000, 0x0000, + "Option", + "GI 0401 SD-Card", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + 0 ), + +/* Reported by Jan Dumon <j.dumon@option.com> + * These devices (wrongly) have a vendor-specific device descriptor. + * These entries are needed so usb-storage can bind to their mass-storage + * interface as an interface driver */ +UNUSUAL_DEV( 0x0af0, 0x7501, 0x0000, 0x0000, + "Option", + "GI 0431 SD-Card", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + 0 ), + +UNUSUAL_DEV( 0x0af0, 0x7701, 0x0000, 0x0000, + "Option", + "GI 0451 SD-Card", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + 0 ), + +UNUSUAL_DEV( 0x0af0, 0x7706, 0x0000, 0x0000, + "Option", + "GI 0451 SD-Card", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + 0 ), + +UNUSUAL_DEV( 0x0af0, 0x7901, 0x0000, 0x0000, + "Option", + "GI 0452 SD-Card", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + 0 ), + +UNUSUAL_DEV( 0x0af0, 0x7A01, 0x0000, 0x0000, + "Option", + "GI 0461 SD-Card", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + 0 ), + +UNUSUAL_DEV( 0x0af0, 0x7A05, 0x0000, 0x0000, + "Option", + "GI 0461 SD-Card", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + 0 ), + +UNUSUAL_DEV( 0x0af0, 0x8300, 0x0000, 0x0000, + "Option", + "GI 033x SD-Card", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + 0 ), + +UNUSUAL_DEV( 0x0af0, 0x8302, 0x0000, 0x0000, + "Option", + "GI 033x SD-Card", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + 0 ), + +UNUSUAL_DEV( 0x0af0, 0x8304, 0x0000, 0x0000, + "Option", + "GI 033x SD-Card", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + 0 ), + +UNUSUAL_DEV( 0x0af0, 0xc100, 0x0000, 0x0000, + "Option", + "GI 070x SD-Card", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + 0 ), + +UNUSUAL_DEV( 0x0af0, 0xd057, 0x0000, 0x0000, + "Option", + "GI 1505 SD-Card", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + 0 ), + +UNUSUAL_DEV( 0x0af0, 0xd058, 0x0000, 0x0000, + "Option", + "GI 1509 SD-Card", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + 0 ), + +UNUSUAL_DEV( 0x0af0, 0xd157, 0x0000, 0x0000, + "Option", + "GI 1515 SD-Card", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + 0 ), + +UNUSUAL_DEV( 0x0af0, 0xd257, 0x0000, 0x0000, + "Option", + "GI 1215 SD-Card", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + 0 ), + +UNUSUAL_DEV( 0x0af0, 0xd357, 0x0000, 0x0000, + "Option", + "GI 1505 SD-Card", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + 0 ), + +/* Reported by Namjae Jeon <namjae.jeon@samsung.com> */ +UNUSUAL_DEV(0x0bc2, 0x2300, 0x0000, 0x9999, + "Seagate", + "Portable HDD", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_WRITE_CACHE), + +/* Reported by Ben Efros <ben@pc-doctor.com> */ +UNUSUAL_DEV( 0x0bc2, 0x3010, 0x0000, 0x0000, + "Seagate", + "FreeAgent Pro", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_SANE_SENSE ), + +UNUSUAL_DEV( 0x0d49, 0x7310, 0x0000, 0x9999, + "Maxtor", + "USB to SATA", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_SANE_SENSE), + +/* + * Pete Zaitcev <zaitcev@yahoo.com>, bz#164688. + * The device blatantly ignores LUN and returns 1 in GetMaxLUN. + */ +UNUSUAL_DEV( 0x0c45, 0x1060, 0x0100, 0x0100, + "Unknown", + "Unknown", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_SINGLE_LUN ), + +/* Submitted by Joris Struyve <joris@struyve.be> */ +UNUSUAL_DEV( 0x0d96, 0x410a, 0x0001, 0xffff, + "Medion", + "MD 7425", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_FIX_INQUIRY), + +/* + * Entry for Jenoptik JD 5200z3 + * + * email: car.busse@gmx.de + */ +UNUSUAL_DEV( 0x0d96, 0x5200, 0x0001, 0x0200, + "Jenoptik", + "JD 5200 z3", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_INQUIRY), + +/* Reported by Jason Johnston <killean@shaw.ca> */ +UNUSUAL_DEV( 0x0dc4, 0x0073, 0x0000, 0x0000, + "Macpower Technology Co.LTD.", + "USB 2.0 3.5\" DEVICE", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY), + +/* Reported by Lubomir Blaha <tritol@trilogic.cz> + * I _REALLY_ don't know what 3rd, 4th number and all defines mean, but this + * works for me. Can anybody correct these values? (I able to test corrected + * version.) + */ +UNUSUAL_DEV( 0x0dd8, 0x1060, 0x0000, 0xffff, + "Netac", + "USB-CF-Card", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_FIX_INQUIRY ), + +/* Reported by Edward Chapman (taken from linux-usb mailing list) + Netac OnlyDisk Mini U2CV2 512MB USB 2.0 Flash Drive */ +UNUSUAL_DEV( 0x0dd8, 0xd202, 0x0000, 0x9999, + "Netac", + "USB Flash Disk", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE ), + + +/* Patch by Stephan Walter <stephan.walter@epfl.ch> + * I don't know why, but it works... */ +UNUSUAL_DEV( 0x0dda, 0x0001, 0x0012, 0x0012, + "WINWARD", + "Music Disk", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE ), + +/* Reported by Ian McConnell <ian at emit.demon.co.uk> */ +UNUSUAL_DEV( 0x0dda, 0x0301, 0x0012, 0x0012, + "PNP_MP3", + "PNP_MP3 PLAYER", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE ), + +/* Reported by Jim McCloskey <mcclosk@ucsc.edu> */ +UNUSUAL_DEV( 0x0e21, 0x0520, 0x0100, 0x0100, + "Cowon Systems", + "iAUDIO M5", + USB_SC_DEVICE, USB_PR_BULK, NULL, + US_FL_NEED_OVERRIDE ), + +/* Submitted by Antoine Mairesse <antoine.mairesse@free.fr> */ +UNUSUAL_DEV( 0x0ed1, 0x6660, 0x0100, 0x0300, + "USB", + "Solid state disk", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_FIX_INQUIRY ), + +/* Submitted by Daniel Drake <dsd@gentoo.org> + * Reported by dayul on the Gentoo Forums */ +UNUSUAL_DEV( 0x0ea0, 0x2168, 0x0110, 0x0110, + "Ours Technology", + "Flash Disk", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE ), + +/* Reported by Rastislav Stanik <rs_kernel@yahoo.com> */ +UNUSUAL_DEV( 0x0ea0, 0x6828, 0x0110, 0x0110, + "USB", + "Flash Disk", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE ), + +/* Reported by Benjamin Schiller <sbenni@gmx.de> + * It is also sold by Easylite as DJ 20 */ +UNUSUAL_DEV( 0x0ed1, 0x7636, 0x0103, 0x0103, + "Typhoon", + "My DJ 1820", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE | US_FL_GO_SLOW | US_FL_MAX_SECTORS_64), + +/* Patch by Leonid Petrov mail at lpetrov.net + * Reported by Robert Spitzenpfeil <robert@spitzenpfeil.org> + * http://www.qbik.ch/usb/devices/showdev.php?id=1705 + * Updated to 103 device by MJ Ray mjr at phonecoop.coop + */ +UNUSUAL_DEV( 0x0f19, 0x0103, 0x0100, 0x0100, + "Oracom Co., Ltd", + "ORC-200M", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE ), + +/* David Kuehling <dvdkhlng@gmx.de>: + * for MP3-Player AVOX WSX-300ER (bought in Japan). Reports lots of SCSI + * errors when trying to write. + */ +UNUSUAL_DEV( 0x0f19, 0x0105, 0x0100, 0x0100, + "C-MEX", + "A-VOX", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE ), + +/* Submitted by Nick Holloway */ +UNUSUAL_DEV( 0x0f88, 0x042e, 0x0100, 0x0100, + "VTech", + "Kidizoom", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY ), + +/* Reported by Moritz Moeller-Herrmann <moritz-kernel@moeller-herrmann.de> */ +UNUSUAL_DEV( 0x0fca, 0x8004, 0x0201, 0x0201, + "Research In Motion", + "BlackBerry Bold 9000", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_MAX_SECTORS_64 ), + +/* Reported by Michael Stattmann <michael@stattmann.com> */ +UNUSUAL_DEV( 0x0fce, 0xd008, 0x0000, 0x0000, + "Sony Ericsson", + "V800-Vodafone 802", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NO_WP_DETECT ), + +/* Reported by The Solutor <thesolutor@gmail.com> */ +UNUSUAL_DEV( 0x0fce, 0xd0e1, 0x0000, 0x0000, + "Sony Ericsson", + "MD400", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_DEVICE), + +/* Reported by Jan Mate <mate@fiit.stuba.sk> + * and by Soeren Sonnenburg <kernel@nn7.de> */ +UNUSUAL_DEV( 0x0fce, 0xe030, 0x0000, 0x0000, + "Sony Ericsson", + "P990i", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ), + +/* Reported by Emmanuel Vasilakis <evas@forthnet.gr> */ +UNUSUAL_DEV( 0x0fce, 0xe031, 0x0000, 0x0000, + "Sony Ericsson", + "M600i", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ), + +/* Reported by Ricardo Barberis <ricardo@dattatec.com> */ +UNUSUAL_DEV( 0x0fce, 0xe092, 0x0000, 0x0000, + "Sony Ericsson", + "P1i", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE ), + +/* Reported by Kevin Cernekee <kpc-usbdev@gelato.uiuc.edu> + * Tested on hardware version 1.10. + * Entry is needed only for the initializer function override. + * Devices with bcd > 110 seem to not need it while those + * with bcd < 110 appear to need it. + */ +UNUSUAL_DEV( 0x1019, 0x0c55, 0x0000, 0x0110, + "Desknote", + "UCR-61S2B", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_ucr61s2b_init, + 0 ), + +UNUSUAL_DEV( 0x1058, 0x0704, 0x0000, 0x9999, + "Western Digital", + "External HDD", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_SANE_SENSE), + +/* Reported by Namjae Jeon <namjae.jeon@samsung.com> */ +UNUSUAL_DEV(0x1058, 0x070a, 0x0000, 0x9999, + "Western Digital", + "My Passport HDD", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_WRITE_CACHE), + +/* Reported by Fabio Venturi <f.venturi@tdnet.it> + * The device reports a vendor-specific bDeviceClass. + */ +UNUSUAL_DEV( 0x10d6, 0x2200, 0x0100, 0x0100, + "Actions Semiconductor", + "Mtp device", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + 0), + +/* Reported by Pascal Terjan <pterjan@mandriva.com> + * Ignore driver CD mode and force into modem mode by default. + */ +UNUSUAL_DEV( 0x1186, 0x3e04, 0x0000, 0x0000, + "D-Link", + "USB Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, option_ms_init, US_FL_IGNORE_DEVICE), + +/* Reported by Kevin Lloyd <linux@sierrawireless.com> + * Entry is needed for the initializer function override, + * which instructs the device to load as a modem + * device. + */ +UNUSUAL_DEV( 0x1199, 0x0fff, 0x0000, 0x9999, + "Sierra Wireless", + "USB MMC Storage", + USB_SC_DEVICE, USB_PR_DEVICE, sierra_ms_init, + 0), + +/* Reported by Jaco Kroon <jaco@kroon.co.za> + * The usb-storage module found on the Digitech GNX4 (and supposedly other + * devices) misbehaves and causes a bunch of invalid I/O errors. + */ +UNUSUAL_DEV( 0x1210, 0x0003, 0x0100, 0x0100, + "Digitech HMG", + "DigiTech Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE ), + +/* Reported by fangxiaozhi <huananhu@huawei.com> + * This brings the HUAWEI data card devices into multi-port mode + */ +UNUSUAL_DEV( 0x12d1, 0x1001, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1003, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1004, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1401, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1402, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1403, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1404, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1405, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1406, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1407, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1408, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1409, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x140A, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x140B, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x140C, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x140D, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x140E, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x140F, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1410, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1411, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1412, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1413, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1414, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1415, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1416, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1417, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1418, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1419, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x141A, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x141B, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x141C, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x141D, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x141E, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x141F, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1420, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1421, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1422, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1423, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1424, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1425, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1426, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1427, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1428, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1429, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x142A, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x142B, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x142C, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x142D, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x142E, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x142F, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1430, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1431, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1432, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1433, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1434, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1435, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1436, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1437, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1438, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1439, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x143A, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x143B, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x143C, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x143D, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x143E, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x143F, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, + 0), + +/* Reported by Vilius Bilinkevicius <vilisas AT xxx DOT lt) */ +UNUSUAL_DEV( 0x132b, 0x000b, 0x0001, 0x0001, + "Minolta", + "Dimage Z10", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + 0 ), + +/* Reported by Kotrla Vitezslav <kotrla@ceb.cz> */ +UNUSUAL_DEV( 0x1370, 0x6828, 0x0110, 0x0110, + "SWISSBIT", + "Black Silver", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE ), + +/* Reported by Qinglin Ye <yestyle@gmail.com> */ +UNUSUAL_DEV( 0x13fe, 0x3600, 0x0100, 0x0100, + "Kingston", + "DT 101 G2", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_BULK_IGNORE_TAG ), + +/* Reported by Francesco Foresti <frafore@tiscali.it> */ +UNUSUAL_DEV( 0x14cd, 0x6600, 0x0201, 0x0201, + "Super Top", + "IDE DEVICE", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE ), + +/* Reported by Michael Büsch <m@bues.ch> */ +UNUSUAL_DEV( 0x152d, 0x0567, 0x0114, 0x0114, + "JMicron", + "USB to ATA/ATAPI Bridge", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_BROKEN_FUA ), + +/* Reported by Alexandre Oliva <oliva@lsd.ic.unicamp.br> + * JMicron responds to USN and several other SCSI ioctls with a + * residue that causes subsequent I/O requests to fail. */ +UNUSUAL_DEV( 0x152d, 0x2329, 0x0100, 0x0100, + "JMicron", + "USB to ATA/ATAPI Bridge", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE | US_FL_SANE_SENSE ), + +/* Reported by Dmitry Nezhevenko <dion@dion.org.ua> */ +UNUSUAL_DEV( 0x152d, 0x2566, 0x0114, 0x0114, + "JMicron", + "USB to ATA/ATAPI Bridge", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_BROKEN_FUA ), + +/* Entrega Technologies U1-SC25 (later Xircom PortGear PGSCSI) + * and Mac USB Dock USB-SCSI */ +UNUSUAL_DEV( 0x1645, 0x0007, 0x0100, 0x0133, + "Entrega Technologies", + "USB to SCSI Converter", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init, + US_FL_SCM_MULT_TARG ), + +/* Reported by Robert Schedel <r.schedel@yahoo.de> + * Note: this is a 'super top' device like the above 14cd/6600 device */ +UNUSUAL_DEV( 0x1652, 0x6600, 0x0201, 0x0201, + "Teac", + "HD-35PUK-B", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE ), + +/* Reported by Oliver Neukum <oneukum@suse.com> */ +UNUSUAL_DEV( 0x174c, 0x55aa, 0x0100, 0x0100, + "ASMedia", + "AS2105", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NEEDS_CAP16), + +/* Reported by Jesse Feddema <jdfeddema@gmail.com> */ +UNUSUAL_DEV( 0x177f, 0x0400, 0x0000, 0x0000, + "Yarvik", + "PMP400", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_BULK_IGNORE_TAG | US_FL_MAX_SECTORS_64 ), + +UNUSUAL_DEV( 0x1822, 0x0001, 0x0000, 0x9999, + "Ariston Technologies", + "iConnect USB to SCSI adapter", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init, + US_FL_SCM_MULT_TARG ), + +/* Reported by Hans de Goede <hdegoede@redhat.com> + * These Appotech controllers are found in Picture Frames, they provide a + * (buggy) emulation of a cdrom drive which contains the windows software + * Uploading of pictures happens over the corresponding /dev/sg device. */ +UNUSUAL_DEV( 0x1908, 0x1315, 0x0000, 0x0000, + "BUILDWIN", + "Photo Frame", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_BAD_SENSE ), +UNUSUAL_DEV( 0x1908, 0x1320, 0x0000, 0x0000, + "BUILDWIN", + "Photo Frame", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_BAD_SENSE ), +UNUSUAL_DEV( 0x1908, 0x3335, 0x0200, 0x0200, + "BUILDWIN", + "Photo Frame", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NO_READ_DISC_INFO ), + +/* Reported by Sven Geggus <sven-usbst@geggus.net> + * This encrypted pen drive returns bogus data for the initial READ(10). + */ +UNUSUAL_DEV( 0x1b1c, 0x1ab5, 0x0200, 0x0200, + "Corsair", + "Padlock v2", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_INITIAL_READ10 ), + +/* Patch by Richard Schütz <r.schtz@t-online.de> + * This external hard drive enclosure uses a JMicron chip which + * needs the US_FL_IGNORE_RESIDUE flag to work properly. */ +UNUSUAL_DEV( 0x1e68, 0x001b, 0x0000, 0x0000, + "TrekStor GmbH & Co. KG", + "DataStation maxi g.u", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE | US_FL_SANE_SENSE ), + +/* Reported by Jasper Mackenzie <scarletpimpernal@hotmail.com> */ +UNUSUAL_DEV( 0x1e74, 0x4621, 0x0000, 0x0000, + "Coby Electronics", + "MP3 Player", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_BULK_IGNORE_TAG | US_FL_MAX_SECTORS_64 ), + +/* Supplied with some Castlewood ORB removable drives */ +UNUSUAL_DEV( 0x2027, 0xa001, 0x0000, 0x9999, + "Double-H Technology", + "USB to SCSI Intelligent Cable", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init, + US_FL_SCM_MULT_TARG ), + +UNUSUAL_DEV( 0x2116, 0x0320, 0x0001, 0x0001, + "ST", + "2A", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY), + +/* patch submitted by Davide Perini <perini.davide@dpsoftware.org> + * and Renato Perini <rperini@email.it> + */ +UNUSUAL_DEV( 0x22b8, 0x3010, 0x0001, 0x0001, + "Motorola", + "RAZR V3x", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ), + +/* + * Patch by Constantin Baranov <const@tltsu.ru> + * Report by Andreas Koenecke. + * Motorola ROKR Z6. + */ +UNUSUAL_DEV( 0x22b8, 0x6426, 0x0101, 0x0101, + "Motorola", + "MSnc.", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_FIX_INQUIRY | US_FL_FIX_CAPACITY | US_FL_BULK_IGNORE_TAG), + +/* Reported by Radovan Garabik <garabik@kassiopeia.juls.savba.sk> */ +UNUSUAL_DEV( 0x2735, 0x100b, 0x0000, 0x9999, + "MPIO", + "HS200", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_GO_SLOW ), + +/* Reported by Frederic Marchal <frederic.marchal@wowcompany.com> + * Mio Moov 330 + */ +UNUSUAL_DEV( 0x3340, 0xffff, 0x0000, 0x0000, + "Mitac", + "Mio DigiWalker USB Sync", + USB_SC_DEVICE,USB_PR_DEVICE,NULL, + US_FL_MAX_SECTORS_64 ), + +/* Reported by Andrey Rahmatullin <wrar@altlinux.org> */ +UNUSUAL_DEV( 0x4102, 0x1020, 0x0100, 0x0100, + "iRiver", + "MP3 T10", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE ), + +/* Reported by Sergey Pinaev <dfo@antex.ru> */ +UNUSUAL_DEV( 0x4102, 0x1059, 0x0000, 0x0000, + "iRiver", + "P7K", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_MAX_SECTORS_64 ), + +/* + * David Härdeman <david@2gen.com> + * The key makes the SCSI stack print confusing (but harmless) messages + */ +UNUSUAL_DEV( 0x4146, 0xba01, 0x0100, 0x0100, + "Iomega", + "Micro Mini 1GB", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ), + +/* + * Nick Bowler <nbowler@elliptictech.com> + * SCSI stack spams (otherwise harmless) error messages. + */ +UNUSUAL_DEV( 0xc251, 0x4003, 0x0100, 0x0100, + "Keil Software, Inc.", + "V2M MotherBoard", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NOT_LOCKABLE), + +/* Reported by Andrew Simmons <andrew.simmons@gmail.com> */ +UNUSUAL_DEV( 0xed06, 0x4500, 0x0001, 0x0001, + "DataStor", + "USB4500 FW1.04", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_CAPACITY_HEURISTICS), + +/* Reported by Alessio Treglia <quadrispro@ubuntu.com> */ +UNUSUAL_DEV( 0xed10, 0x7636, 0x0001, 0x0001, + "TGE", + "Digital MP3 Audio Player", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ), + +/* Unusual uas devices */ +#if IS_ENABLED(CONFIG_USB_UAS) +#include "unusual_uas.h" +#endif + +/* Control/Bulk transport for all SubClass values */ +USUAL_DEV(USB_SC_RBC, USB_PR_CB), +USUAL_DEV(USB_SC_8020, USB_PR_CB), +USUAL_DEV(USB_SC_QIC, USB_PR_CB), +USUAL_DEV(USB_SC_UFI, USB_PR_CB), +USUAL_DEV(USB_SC_8070, USB_PR_CB), +USUAL_DEV(USB_SC_SCSI, USB_PR_CB), + +/* Control/Bulk/Interrupt transport for all SubClass values */ +USUAL_DEV(USB_SC_RBC, USB_PR_CBI), +USUAL_DEV(USB_SC_8020, USB_PR_CBI), +USUAL_DEV(USB_SC_QIC, USB_PR_CBI), +USUAL_DEV(USB_SC_UFI, USB_PR_CBI), +USUAL_DEV(USB_SC_8070, USB_PR_CBI), +USUAL_DEV(USB_SC_SCSI, USB_PR_CBI), + +/* Bulk-only transport for all SubClass values */ +USUAL_DEV(USB_SC_RBC, USB_PR_BULK), +USUAL_DEV(USB_SC_8020, USB_PR_BULK), +USUAL_DEV(USB_SC_QIC, USB_PR_BULK), +USUAL_DEV(USB_SC_UFI, USB_PR_BULK), +USUAL_DEV(USB_SC_8070, USB_PR_BULK), +USUAL_DEV(USB_SC_SCSI, USB_PR_BULK), diff --git a/kernel/drivers/usb/storage/unusual_ene_ub6250.h b/kernel/drivers/usb/storage/unusual_ene_ub6250.h new file mode 100644 index 000000000..5667f5d36 --- /dev/null +++ b/kernel/drivers/usb/storage/unusual_ene_ub6250.h @@ -0,0 +1,26 @@ +/* + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#if defined(CONFIG_USB_STORAGE_ENE_UB6250) || \ + defined(CONFIG_USB_STORAGE_ENE_UB6250_MODULE) + +UNUSUAL_DEV(0x0cf2, 0x6250, 0x0000, 0x9999, + "ENE", + "ENE UB6250 reader", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, 0), + +#endif /* defined(CONFIG_USB_STORAGE_ENE_UB6250) || ... */ diff --git a/kernel/drivers/usb/storage/unusual_freecom.h b/kernel/drivers/usb/storage/unusual_freecom.h new file mode 100644 index 000000000..59a261155 --- /dev/null +++ b/kernel/drivers/usb/storage/unusual_freecom.h @@ -0,0 +1,26 @@ +/* Unusual Devices File for the Freecom USB/IDE adaptor + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#if defined(CONFIG_USB_STORAGE_FREECOM) || \ + defined(CONFIG_USB_STORAGE_FREECOM_MODULE) + +UNUSUAL_DEV( 0x07ab, 0xfc01, 0x0000, 0x9999, + "Freecom", + "USB-IDE", + USB_SC_QIC, USB_PR_FREECOM, init_freecom, 0), + +#endif /* defined(CONFIG_USB_STORAGE_FREECOM) || ... */ diff --git a/kernel/drivers/usb/storage/unusual_isd200.h b/kernel/drivers/usb/storage/unusual_isd200.h new file mode 100644 index 000000000..14cca0c48 --- /dev/null +++ b/kernel/drivers/usb/storage/unusual_isd200.h @@ -0,0 +1,57 @@ +/* Unusual Devices File for In-System Design, Inc. ISD200 ASIC + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#if defined(CONFIG_USB_STORAGE_ISD200) || \ + defined(CONFIG_USB_STORAGE_ISD200_MODULE) + +UNUSUAL_DEV( 0x054c, 0x002b, 0x0100, 0x0110, + "Sony", + "Portable USB Harddrive V2", + USB_SC_ISD200, USB_PR_BULK, isd200_Initialization, + 0), + +UNUSUAL_DEV( 0x05ab, 0x0031, 0x0100, 0x0110, + "In-System", + "USB/IDE Bridge (ATA/ATAPI)", + USB_SC_ISD200, USB_PR_BULK, isd200_Initialization, + 0), + +UNUSUAL_DEV( 0x05ab, 0x0301, 0x0100, 0x0110, + "In-System", + "Portable USB Harddrive V2", + USB_SC_ISD200, USB_PR_BULK, isd200_Initialization, + 0), + +UNUSUAL_DEV( 0x05ab, 0x0351, 0x0100, 0x0110, + "In-System", + "Portable USB Harddrive V2", + USB_SC_ISD200, USB_PR_BULK, isd200_Initialization, + 0), + +UNUSUAL_DEV( 0x05ab, 0x5701, 0x0100, 0x0110, + "In-System", + "USB Storage Adapter V2", + USB_SC_ISD200, USB_PR_BULK, isd200_Initialization, + 0), + +UNUSUAL_DEV( 0x0bf6, 0xa001, 0x0100, 0x0110, + "ATI", + "USB Cable 205", + USB_SC_ISD200, USB_PR_BULK, isd200_Initialization, + 0), + +#endif /* defined(CONFIG_USB_STORAGE_ISD200) || ... */ diff --git a/kernel/drivers/usb/storage/unusual_jumpshot.h b/kernel/drivers/usb/storage/unusual_jumpshot.h new file mode 100644 index 000000000..54be78b5d --- /dev/null +++ b/kernel/drivers/usb/storage/unusual_jumpshot.h @@ -0,0 +1,27 @@ +/* Unusual Devices File for the Lexar "Jumpshot" Compact Flash reader + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#if defined(CONFIG_USB_STORAGE_JUMPSHOT) || \ + defined(CONFIG_USB_STORAGE_JUMPSHOT_MODULE) + +UNUSUAL_DEV( 0x05dc, 0x0001, 0x0000, 0x0001, + "Lexar", + "Jumpshot USB CF Reader", + USB_SC_SCSI, USB_PR_JUMPSHOT, NULL, + US_FL_NEED_OVERRIDE), + +#endif /* defined(CONFIG_USB_STORAGE_JUMPSHOT) || ... */ diff --git a/kernel/drivers/usb/storage/unusual_karma.h b/kernel/drivers/usb/storage/unusual_karma.h new file mode 100644 index 000000000..6df03972a --- /dev/null +++ b/kernel/drivers/usb/storage/unusual_karma.h @@ -0,0 +1,26 @@ +/* Unusual Devices File for the Rio Karma + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#if defined(CONFIG_USB_STORAGE_KARMA) || \ + defined(CONFIG_USB_STORAGE_KARMA_MODULE) + +UNUSUAL_DEV( 0x045a, 0x5210, 0x0101, 0x0101, + "Rio", + "Rio Karma", + USB_SC_SCSI, USB_PR_KARMA, rio_karma_init, 0), + +#endif /* defined(CONFIG_USB_STORAGE_KARMA) || ... */ diff --git a/kernel/drivers/usb/storage/unusual_onetouch.h b/kernel/drivers/usb/storage/unusual_onetouch.h new file mode 100644 index 000000000..0abb819c7 --- /dev/null +++ b/kernel/drivers/usb/storage/unusual_onetouch.h @@ -0,0 +1,36 @@ +/* Unusual Devices File for the Maxtor OneTouch USB hard drive's button + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#if defined(CONFIG_USB_STORAGE_ONETOUCH) || \ + defined(CONFIG_USB_STORAGE_ONETOUCH_MODULE) + +/* Submitted by: Nick Sillik <n.sillik@temple.edu> + * Needed for OneTouch extension to usb-storage + */ +UNUSUAL_DEV( 0x0d49, 0x7000, 0x0000, 0x9999, + "Maxtor", + "OneTouch External Harddrive", + USB_SC_DEVICE, USB_PR_DEVICE, onetouch_connect_input, + 0), + +UNUSUAL_DEV( 0x0d49, 0x7010, 0x0000, 0x9999, + "Maxtor", + "OneTouch External Harddrive", + USB_SC_DEVICE, USB_PR_DEVICE, onetouch_connect_input, + 0), + +#endif /* defined(CONFIG_USB_STORAGE_ONETOUCH) || ... */ diff --git a/kernel/drivers/usb/storage/unusual_realtek.h b/kernel/drivers/usb/storage/unusual_realtek.h new file mode 100644 index 000000000..e41f50c95 --- /dev/null +++ b/kernel/drivers/usb/storage/unusual_realtek.h @@ -0,0 +1,41 @@ +/* Driver for Realtek RTS51xx USB card reader + * + * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + * + * Author: + * wwang (wei_wang@realsil.com.cn) + * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China + */ + +#if defined(CONFIG_USB_STORAGE_REALTEK) || \ + defined(CONFIG_USB_STORAGE_REALTEK_MODULE) + +UNUSUAL_DEV(0x0bda, 0x0138, 0x0000, 0x9999, + "Realtek", + "USB Card Reader", + USB_SC_DEVICE, USB_PR_DEVICE, init_realtek_cr, 0), + +UNUSUAL_DEV(0x0bda, 0x0158, 0x0000, 0x9999, + "Realtek", + "USB Card Reader", + USB_SC_DEVICE, USB_PR_DEVICE, init_realtek_cr, 0), + +UNUSUAL_DEV(0x0bda, 0x0159, 0x0000, 0x9999, + "Realtek", + "USB Card Reader", + USB_SC_DEVICE, USB_PR_DEVICE, init_realtek_cr, 0), + +#endif /* defined(CONFIG_USB_STORAGE_REALTEK) || ... */ diff --git a/kernel/drivers/usb/storage/unusual_sddr09.h b/kernel/drivers/usb/storage/unusual_sddr09.h new file mode 100644 index 000000000..59a7e37b6 --- /dev/null +++ b/kernel/drivers/usb/storage/unusual_sddr09.h @@ -0,0 +1,56 @@ +/* Unusual Devices File for SanDisk SDDR-09 SmartMedia reader + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#if defined(CONFIG_USB_STORAGE_SDDR09) || \ + defined(CONFIG_USB_STORAGE_SDDR09_MODULE) + +UNUSUAL_DEV( 0x0436, 0x0005, 0x0100, 0x0100, + "Microtech", + "CameraMate (DPCM_USB)", + USB_SC_SCSI, USB_PR_DPCM_USB, NULL, 0), + +UNUSUAL_DEV( 0x04e6, 0x0003, 0x0000, 0x9999, + "Sandisk", + "ImageMate SDDR09", + USB_SC_SCSI, USB_PR_EUSB_SDDR09, usb_stor_sddr09_init, + 0), + +/* This entry is from Andries.Brouwer@cwi.nl */ +UNUSUAL_DEV( 0x04e6, 0x0005, 0x0100, 0x0208, + "SCM Microsystems", + "eUSB SmartMedia / CompactFlash Adapter", + USB_SC_SCSI, USB_PR_DPCM_USB, usb_stor_sddr09_dpcm_init, + 0), + +UNUSUAL_DEV( 0x066b, 0x0105, 0x0100, 0x0100, + "Olympus", + "Camedia MAUSB-2", + USB_SC_SCSI, USB_PR_EUSB_SDDR09, usb_stor_sddr09_init, + 0), + +UNUSUAL_DEV( 0x0781, 0x0200, 0x0000, 0x9999, + "Sandisk", + "ImageMate SDDR-09", + USB_SC_SCSI, USB_PR_EUSB_SDDR09, usb_stor_sddr09_init, + 0), + +UNUSUAL_DEV( 0x07af, 0x0006, 0x0100, 0x0100, + "Microtech", + "CameraMate (DPCM_USB)", + USB_SC_SCSI, USB_PR_DPCM_USB, NULL, 0), + +#endif /* defined(CONFIG_USB_STORAGE_SDDR09) || ... */ diff --git a/kernel/drivers/usb/storage/unusual_sddr55.h b/kernel/drivers/usb/storage/unusual_sddr55.h new file mode 100644 index 000000000..fcb7e12c5 --- /dev/null +++ b/kernel/drivers/usb/storage/unusual_sddr55.h @@ -0,0 +1,44 @@ +/* Unusual Devices File for SanDisk SDDR-55 SmartMedia reader + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#if defined(CONFIG_USB_STORAGE_SDDR55) || \ + defined(CONFIG_USB_STORAGE_SDDR55_MODULE) + +/* Contributed by Peter Waechtler */ +UNUSUAL_DEV( 0x07c4, 0xa103, 0x0000, 0x9999, + "Datafab", + "MDSM-B reader", + USB_SC_SCSI, USB_PR_SDDR55, NULL, + US_FL_FIX_INQUIRY), + +/* SM part - aeb <Andries.Brouwer@cwi.nl> */ +UNUSUAL_DEV( 0x07c4, 0xa109, 0x0000, 0xffff, + "Datafab Systems, Inc.", + "USB to CF + SM Combo (LC1)", + USB_SC_SCSI, USB_PR_SDDR55, NULL, 0), + +UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff, + "Acomdata", + "SM", + USB_SC_SCSI, USB_PR_SDDR55, NULL, 0), + +UNUSUAL_DEV( 0x55aa, 0xa103, 0x0000, 0x9999, + "Sandisk", + "ImageMate SDDR55", + USB_SC_SCSI, USB_PR_SDDR55, NULL, 0), + +#endif /* defined(CONFIG_USB_STORAGE_SDDR55) || ... */ diff --git a/kernel/drivers/usb/storage/unusual_uas.h b/kernel/drivers/usb/storage/unusual_uas.h new file mode 100644 index 000000000..c85ea5300 --- /dev/null +++ b/kernel/drivers/usb/storage/unusual_uas.h @@ -0,0 +1,163 @@ +/* Driver for USB Attached SCSI devices - Unusual Devices File + * + * (c) 2013 Hans de Goede <hdegoede@redhat.com> + * + * Based on the same file for the usb-storage driver, which is: + * (c) 2000-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net) + * (c) 2000 Adam J. Richter (adam@yggdrasil.com), Yggdrasil Computing, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* + * IMPORTANT NOTE: This file must be included in another file which defines + * a UNUSUAL_DEV macro before this file is included. + */ + +/* + * If you edit this file, please try to keep it sorted first by VendorID, + * then by ProductID. + * + * If you want to add an entry for this file, be sure to include the + * following information: + * - a patch that adds the entry for your device, including your + * email address right above the entry (plus maybe a brief + * explanation of the reason for the entry), + * - lsusb -v output for the device + * Send your submission to Hans de Goede <hdegoede@redhat.com> + * and don't forget to CC: the USB development list <linux-usb@vger.kernel.org> + */ + +/* + * Apricorn USB3 dongle sometimes returns "USBSUSBSUSBS" in response to SCSI + * commands in UAS mode. Observed with the 1.28 firmware; are there others? + */ +UNUSUAL_DEV(0x0984, 0x0301, 0x0128, 0x0128, + "Apricorn", + "", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_UAS), + +/* https://bugzilla.kernel.org/show_bug.cgi?id=79511 */ +UNUSUAL_DEV(0x0bc2, 0x2312, 0x0000, 0x9999, + "Seagate", + "Expansion Desk", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NO_ATA_1X), + +/* https://bbs.archlinux.org/viewtopic.php?id=183190 */ +UNUSUAL_DEV(0x0bc2, 0x3312, 0x0000, 0x9999, + "Seagate", + "Expansion Desk", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NO_ATA_1X), + +/* Reported-by: Hans de Goede <hdegoede@redhat.com> */ +UNUSUAL_DEV(0x0bc2, 0x3320, 0x0000, 0x9999, + "Seagate", + "Expansion Desk", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NO_ATA_1X), + +/* Reported-by: Bogdan Mihalcea <bogdan.mihalcea@infim.ro> */ +UNUSUAL_DEV(0x0bc2, 0xa003, 0x0000, 0x9999, + "Seagate", + "Backup Plus", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NO_ATA_1X), + +/* Reported-by: Marcin Zajączkowski <mszpak@wp.pl> */ +UNUSUAL_DEV(0x0bc2, 0xa013, 0x0000, 0x9999, + "Seagate", + "Backup Plus", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NO_ATA_1X), + +/* Reported-by: Hans de Goede <hdegoede@redhat.com> */ +UNUSUAL_DEV(0x0bc2, 0xa0a4, 0x0000, 0x9999, + "Seagate", + "Backup Plus Desk", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NO_ATA_1X), + +/* https://bbs.archlinux.org/viewtopic.php?id=183190 */ +UNUSUAL_DEV(0x0bc2, 0xab20, 0x0000, 0x9999, + "Seagate", + "Backup+ BK", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NO_ATA_1X), + +/* https://bbs.archlinux.org/viewtopic.php?id=183190 */ +UNUSUAL_DEV(0x0bc2, 0xab21, 0x0000, 0x9999, + "Seagate", + "Backup+ BK", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NO_ATA_1X), + +/* Reported-by: G. Richard Bellamy <rbellamy@pteradigm.com> */ +UNUSUAL_DEV(0x0bc2, 0xab2a, 0x0000, 0x9999, + "Seagate", + "BUP Fast HDD", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NO_ATA_1X), + +/* Reported-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> */ +UNUSUAL_DEV(0x13fd, 0x3940, 0x0000, 0x9999, + "Initio Corporation", + "", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NO_ATA_1X), + +/* Reported-by: Tom Arild Naess <tanaess@gmail.com> */ +UNUSUAL_DEV(0x152d, 0x0539, 0x0000, 0x9999, + "JMicron", + "JMS539", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NO_REPORT_OPCODES), + +/* Reported-by: Claudio Bizzarri <claudio.bizzarri@gmail.com> */ +UNUSUAL_DEV(0x152d, 0x0567, 0x0000, 0x9999, + "JMicron", + "JMS567", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NO_REPORT_OPCODES), + +/* Reported-by: Hans de Goede <hdegoede@redhat.com> */ +UNUSUAL_DEV(0x2109, 0x0711, 0x0000, 0x9999, + "VIA", + "VL711", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NO_ATA_1X), + +/* Reported-by: Takeo Nakayama <javhera@gmx.com> */ +UNUSUAL_DEV(0x357d, 0x7788, 0x0000, 0x9999, + "JMicron", + "JMS566", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NO_REPORT_OPCODES), + +/* Reported-by: Hans de Goede <hdegoede@redhat.com> */ +UNUSUAL_DEV(0x4971, 0x1012, 0x0000, 0x9999, + "Hitachi", + "External HDD", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_UAS), + +/* Reported-by: Richard Henderson <rth@redhat.com> */ +UNUSUAL_DEV(0x4971, 0x8017, 0x0000, 0x9999, + "SimpleTech", + "External HDD", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NO_REPORT_OPCODES), diff --git a/kernel/drivers/usb/storage/unusual_usbat.h b/kernel/drivers/usb/storage/unusual_usbat.h new file mode 100644 index 000000000..38e79c4e6 --- /dev/null +++ b/kernel/drivers/usb/storage/unusual_usbat.h @@ -0,0 +1,43 @@ +/* Unusual Devices File for SCM Microsystems (a.k.a. Shuttle) USB-ATAPI cable + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#if defined(CONFIG_USB_STORAGE_USBAT) || \ + defined(CONFIG_USB_STORAGE_USBAT_MODULE) + +UNUSUAL_DEV( 0x03f0, 0x0207, 0x0001, 0x0001, + "HP", + "CD-Writer+ 8200e", + USB_SC_8070, USB_PR_USBAT, init_usbat_cd, 0), + +UNUSUAL_DEV( 0x03f0, 0x0307, 0x0001, 0x0001, + "HP", + "CD-Writer+ CD-4e", + USB_SC_8070, USB_PR_USBAT, init_usbat_cd, 0), + +UNUSUAL_DEV( 0x04e6, 0x1010, 0x0000, 0x9999, + "Shuttle/SCM", + "USBAT-02", + USB_SC_SCSI, USB_PR_USBAT, init_usbat_flash, + US_FL_SINGLE_LUN), + +UNUSUAL_DEV( 0x0781, 0x0005, 0x0005, 0x0005, + "Sandisk", + "ImageMate SDDR-05b", + USB_SC_SCSI, USB_PR_USBAT, init_usbat_flash, + US_FL_SINGLE_LUN), + +#endif /* defined(CONFIG_USB_STORAGE_USBAT) || ... */ diff --git a/kernel/drivers/usb/storage/usb.c b/kernel/drivers/usb/storage/usb.c new file mode 100644 index 000000000..6c10c888f --- /dev/null +++ b/kernel/drivers/usb/storage/usb.c @@ -0,0 +1,1140 @@ +/* Driver for USB Mass Storage compliant devices + * + * Current development and maintenance by: + * (c) 1999-2003 Matthew Dharm (mdharm-usb@one-eyed-alien.net) + * + * Developed with the assistance of: + * (c) 2000 David L. Brown, Jr. (usb-storage@davidb.org) + * (c) 2003-2009 Alan Stern (stern@rowland.harvard.edu) + * + * Initial work by: + * (c) 1999 Michael Gee (michael@linuxspecific.com) + * + * usb_device_id support by Adam J. Richter (adam@yggdrasil.com): + * (c) 2000 Yggdrasil Computing, Inc. + * + * This driver is based on the 'USB Mass Storage Class' document. This + * describes in detail the protocol used to communicate with such + * devices. Clearly, the designers had SCSI and ATAPI commands in + * mind when they created this document. The commands are all very + * similar to commands in the SCSI-II and ATAPI specifications. + * + * It is important to note that in a number of cases this class + * exhibits class-specific exemptions from the USB specification. + * Notably the usage of NAK, STALL and ACK differs from the norm, in + * that they are used to communicate wait, failed and OK on commands. + * + * Also, for certain devices, the interrupt endpoint is used to convey + * status of a command. + * + * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more + * information about this driver. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifdef CONFIG_USB_STORAGE_DEBUG +#define DEBUG +#endif + +#include <linux/sched.h> +#include <linux/errno.h> +#include <linux/freezer.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/kthread.h> +#include <linux/mutex.h> +#include <linux/utsname.h> + +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_device.h> + +#include "usb.h" +#include "scsiglue.h" +#include "transport.h" +#include "protocol.h" +#include "debug.h" +#include "initializers.h" + +#include "sierra_ms.h" +#include "option_ms.h" + +#if IS_ENABLED(CONFIG_USB_UAS) +#include "uas-detect.h" +#endif + +/* Some informational data */ +MODULE_AUTHOR("Matthew Dharm <mdharm-usb@one-eyed-alien.net>"); +MODULE_DESCRIPTION("USB Mass Storage driver for Linux"); +MODULE_LICENSE("GPL"); + +static unsigned int delay_use = 1; +module_param(delay_use, uint, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(delay_use, "seconds to delay before using a new device"); + +static char quirks[128]; +module_param_string(quirks, quirks, sizeof(quirks), S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(quirks, "supplemental list of device IDs and their quirks"); + + +/* + * The entries in this table correspond, line for line, + * with the entries in usb_storage_usb_ids[], defined in usual-tables.c. + */ + +/* The vendor name should be kept at eight characters or less, and + * the product name should be kept at 16 characters or less. If a device + * has the US_FL_FIX_INQUIRY flag, then the vendor and product names + * normally generated by a device through the INQUIRY response will be + * taken from this list, and this is the reason for the above size + * restriction. However, if the flag is not present, then you + * are free to use as many characters as you like. + */ + +#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \ + vendor_name, product_name, use_protocol, use_transport, \ + init_function, Flags) \ +{ \ + .vendorName = vendor_name, \ + .productName = product_name, \ + .useProtocol = use_protocol, \ + .useTransport = use_transport, \ + .initFunction = init_function, \ +} + +#define COMPLIANT_DEV UNUSUAL_DEV + +#define USUAL_DEV(use_protocol, use_transport) \ +{ \ + .useProtocol = use_protocol, \ + .useTransport = use_transport, \ +} + +#define UNUSUAL_VENDOR_INTF(idVendor, cl, sc, pr, \ + vendor_name, product_name, use_protocol, use_transport, \ + init_function, Flags) \ +{ \ + .vendorName = vendor_name, \ + .productName = product_name, \ + .useProtocol = use_protocol, \ + .useTransport = use_transport, \ + .initFunction = init_function, \ +} + +static struct us_unusual_dev us_unusual_dev_list[] = { +# include "unusual_devs.h" + { } /* Terminating entry */ +}; + +static struct us_unusual_dev for_dynamic_ids = + USUAL_DEV(USB_SC_SCSI, USB_PR_BULK); + +#undef UNUSUAL_DEV +#undef COMPLIANT_DEV +#undef USUAL_DEV +#undef UNUSUAL_VENDOR_INTF + +#ifdef CONFIG_LOCKDEP + +static struct lock_class_key us_interface_key[USB_MAXINTERFACES]; + +static void us_set_lock_class(struct mutex *mutex, + struct usb_interface *intf) +{ + struct usb_device *udev = interface_to_usbdev(intf); + struct usb_host_config *config = udev->actconfig; + int i; + + for (i = 0; i < config->desc.bNumInterfaces; i++) { + if (config->interface[i] == intf) + break; + } + + BUG_ON(i == config->desc.bNumInterfaces); + + lockdep_set_class(mutex, &us_interface_key[i]); +} + +#else + +static void us_set_lock_class(struct mutex *mutex, + struct usb_interface *intf) +{ +} + +#endif + +#ifdef CONFIG_PM /* Minimal support for suspend and resume */ + +int usb_stor_suspend(struct usb_interface *iface, pm_message_t message) +{ + struct us_data *us = usb_get_intfdata(iface); + + /* Wait until no command is running */ + mutex_lock(&us->dev_mutex); + + if (us->suspend_resume_hook) + (us->suspend_resume_hook)(us, US_SUSPEND); + + /* When runtime PM is working, we'll set a flag to indicate + * whether we should autoresume when a SCSI request arrives. */ + + mutex_unlock(&us->dev_mutex); + return 0; +} +EXPORT_SYMBOL_GPL(usb_stor_suspend); + +int usb_stor_resume(struct usb_interface *iface) +{ + struct us_data *us = usb_get_intfdata(iface); + + mutex_lock(&us->dev_mutex); + + if (us->suspend_resume_hook) + (us->suspend_resume_hook)(us, US_RESUME); + + mutex_unlock(&us->dev_mutex); + return 0; +} +EXPORT_SYMBOL_GPL(usb_stor_resume); + +int usb_stor_reset_resume(struct usb_interface *iface) +{ + struct us_data *us = usb_get_intfdata(iface); + + /* Report the reset to the SCSI core */ + usb_stor_report_bus_reset(us); + + /* FIXME: Notify the subdrivers that they need to reinitialize + * the device */ + return 0; +} +EXPORT_SYMBOL_GPL(usb_stor_reset_resume); + +#endif /* CONFIG_PM */ + +/* + * The next two routines get called just before and just after + * a USB port reset, whether from this driver or a different one. + */ + +int usb_stor_pre_reset(struct usb_interface *iface) +{ + struct us_data *us = usb_get_intfdata(iface); + + /* Make sure no command runs during the reset */ + mutex_lock(&us->dev_mutex); + return 0; +} +EXPORT_SYMBOL_GPL(usb_stor_pre_reset); + +int usb_stor_post_reset(struct usb_interface *iface) +{ + struct us_data *us = usb_get_intfdata(iface); + + /* Report the reset to the SCSI core */ + usb_stor_report_bus_reset(us); + + /* FIXME: Notify the subdrivers that they need to reinitialize + * the device */ + + mutex_unlock(&us->dev_mutex); + return 0; +} +EXPORT_SYMBOL_GPL(usb_stor_post_reset); + +/* + * fill_inquiry_response takes an unsigned char array (which must + * be at least 36 characters) and populates the vendor name, + * product name, and revision fields. Then the array is copied + * into the SCSI command's response buffer (oddly enough + * called request_buffer). data_len contains the length of the + * data array, which again must be at least 36. + */ + +void fill_inquiry_response(struct us_data *us, unsigned char *data, + unsigned int data_len) +{ + if (data_len < 36) /* You lose. */ + return; + + memset(data+8, ' ', 28); + if (data[0]&0x20) { /* USB device currently not connected. Return + peripheral qualifier 001b ("...however, the + physical device is not currently connected + to this logical unit") and leave vendor and + product identification empty. ("If the target + does store some of the INQUIRY data on the + device, it may return zeros or ASCII spaces + (20h) in those fields until the data is + available from the device."). */ + } else { + u16 bcdDevice = le16_to_cpu(us->pusb_dev->descriptor.bcdDevice); + int n; + + n = strlen(us->unusual_dev->vendorName); + memcpy(data+8, us->unusual_dev->vendorName, min(8, n)); + n = strlen(us->unusual_dev->productName); + memcpy(data+16, us->unusual_dev->productName, min(16, n)); + + data[32] = 0x30 + ((bcdDevice>>12) & 0x0F); + data[33] = 0x30 + ((bcdDevice>>8) & 0x0F); + data[34] = 0x30 + ((bcdDevice>>4) & 0x0F); + data[35] = 0x30 + ((bcdDevice) & 0x0F); + } + + usb_stor_set_xfer_buf(data, data_len, us->srb); +} +EXPORT_SYMBOL_GPL(fill_inquiry_response); + +static int usb_stor_control_thread(void * __us) +{ + struct us_data *us = (struct us_data *)__us; + struct Scsi_Host *host = us_to_host(us); + + for (;;) { + usb_stor_dbg(us, "*** thread sleeping\n"); + if (wait_for_completion_interruptible(&us->cmnd_ready)) + break; + + usb_stor_dbg(us, "*** thread awakened\n"); + + /* lock the device pointers */ + mutex_lock(&(us->dev_mutex)); + + /* lock access to the state */ + scsi_lock(host); + + /* When we are called with no command pending, we're done */ + if (us->srb == NULL) { + scsi_unlock(host); + mutex_unlock(&us->dev_mutex); + usb_stor_dbg(us, "-- exiting\n"); + break; + } + + /* has the command timed out *already* ? */ + if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) { + us->srb->result = DID_ABORT << 16; + goto SkipForAbort; + } + + scsi_unlock(host); + + /* reject the command if the direction indicator + * is UNKNOWN + */ + if (us->srb->sc_data_direction == DMA_BIDIRECTIONAL) { + usb_stor_dbg(us, "UNKNOWN data direction\n"); + us->srb->result = DID_ERROR << 16; + } + + /* reject if target != 0 or if LUN is higher than + * the maximum known LUN + */ + else if (us->srb->device->id && + !(us->fflags & US_FL_SCM_MULT_TARG)) { + usb_stor_dbg(us, "Bad target number (%d:%llu)\n", + us->srb->device->id, + us->srb->device->lun); + us->srb->result = DID_BAD_TARGET << 16; + } + + else if (us->srb->device->lun > us->max_lun) { + usb_stor_dbg(us, "Bad LUN (%d:%llu)\n", + us->srb->device->id, + us->srb->device->lun); + us->srb->result = DID_BAD_TARGET << 16; + } + + /* Handle those devices which need us to fake + * their inquiry data */ + else if ((us->srb->cmnd[0] == INQUIRY) && + (us->fflags & US_FL_FIX_INQUIRY)) { + unsigned char data_ptr[36] = { + 0x00, 0x80, 0x02, 0x02, + 0x1F, 0x00, 0x00, 0x00}; + + usb_stor_dbg(us, "Faking INQUIRY command\n"); + fill_inquiry_response(us, data_ptr, 36); + us->srb->result = SAM_STAT_GOOD; + } + + /* we've got a command, let's do it! */ + else { + US_DEBUG(usb_stor_show_command(us, us->srb)); + us->proto_handler(us->srb, us); + usb_mark_last_busy(us->pusb_dev); + } + + /* lock access to the state */ + scsi_lock(host); + + /* indicate that the command is done */ + if (us->srb->result != DID_ABORT << 16) { + usb_stor_dbg(us, "scsi cmd done, result=0x%x\n", + us->srb->result); + us->srb->scsi_done(us->srb); + } else { +SkipForAbort: + usb_stor_dbg(us, "scsi command aborted\n"); + } + + /* If an abort request was received we need to signal that + * the abort has finished. The proper test for this is + * the TIMED_OUT flag, not srb->result == DID_ABORT, because + * the timeout might have occurred after the command had + * already completed with a different result code. */ + if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) { + complete(&(us->notify)); + + /* Allow USB transfers to resume */ + clear_bit(US_FLIDX_ABORTING, &us->dflags); + clear_bit(US_FLIDX_TIMED_OUT, &us->dflags); + } + + /* finished working on this command */ + us->srb = NULL; + scsi_unlock(host); + + /* unlock the device pointers */ + mutex_unlock(&us->dev_mutex); + } /* for (;;) */ + + /* Wait until we are told to stop */ + for (;;) { + set_current_state(TASK_INTERRUPTIBLE); + if (kthread_should_stop()) + break; + schedule(); + } + __set_current_state(TASK_RUNNING); + return 0; +} + +/*********************************************************************** + * Device probing and disconnecting + ***********************************************************************/ + +/* Associate our private data with the USB device */ +static int associate_dev(struct us_data *us, struct usb_interface *intf) +{ + /* Fill in the device-related fields */ + us->pusb_dev = interface_to_usbdev(intf); + us->pusb_intf = intf; + us->ifnum = intf->cur_altsetting->desc.bInterfaceNumber; + usb_stor_dbg(us, "Vendor: 0x%04x, Product: 0x%04x, Revision: 0x%04x\n", + le16_to_cpu(us->pusb_dev->descriptor.idVendor), + le16_to_cpu(us->pusb_dev->descriptor.idProduct), + le16_to_cpu(us->pusb_dev->descriptor.bcdDevice)); + usb_stor_dbg(us, "Interface Subclass: 0x%02x, Protocol: 0x%02x\n", + intf->cur_altsetting->desc.bInterfaceSubClass, + intf->cur_altsetting->desc.bInterfaceProtocol); + + /* Store our private data in the interface */ + usb_set_intfdata(intf, us); + + /* Allocate the control/setup and DMA-mapped buffers */ + us->cr = kmalloc(sizeof(*us->cr), GFP_KERNEL); + if (!us->cr) + return -ENOMEM; + + us->iobuf = usb_alloc_coherent(us->pusb_dev, US_IOBUF_SIZE, + GFP_KERNEL, &us->iobuf_dma); + if (!us->iobuf) { + usb_stor_dbg(us, "I/O buffer allocation failed\n"); + return -ENOMEM; + } + return 0; +} + +/* Works only for digits and letters, but small and fast */ +#define TOLOWER(x) ((x) | 0x20) + +/* Adjust device flags based on the "quirks=" module parameter */ +void usb_stor_adjust_quirks(struct usb_device *udev, unsigned long *fflags) +{ + char *p; + u16 vid = le16_to_cpu(udev->descriptor.idVendor); + u16 pid = le16_to_cpu(udev->descriptor.idProduct); + unsigned f = 0; + unsigned int mask = (US_FL_SANE_SENSE | US_FL_BAD_SENSE | + US_FL_FIX_CAPACITY | US_FL_IGNORE_UAS | + US_FL_CAPACITY_HEURISTICS | US_FL_IGNORE_DEVICE | + US_FL_NOT_LOCKABLE | US_FL_MAX_SECTORS_64 | + US_FL_CAPACITY_OK | US_FL_IGNORE_RESIDUE | + US_FL_SINGLE_LUN | US_FL_NO_WP_DETECT | + US_FL_NO_READ_DISC_INFO | US_FL_NO_READ_CAPACITY_16 | + US_FL_INITIAL_READ10 | US_FL_WRITE_CACHE | + US_FL_NO_ATA_1X | US_FL_NO_REPORT_OPCODES | + US_FL_MAX_SECTORS_240); + + p = quirks; + while (*p) { + /* Each entry consists of VID:PID:flags */ + if (vid == simple_strtoul(p, &p, 16) && + *p == ':' && + pid == simple_strtoul(p+1, &p, 16) && + *p == ':') + break; + + /* Move forward to the next entry */ + while (*p) { + if (*p++ == ',') + break; + } + } + if (!*p) /* No match */ + return; + + /* Collect the flags */ + while (*++p && *p != ',') { + switch (TOLOWER(*p)) { + case 'a': + f |= US_FL_SANE_SENSE; + break; + case 'b': + f |= US_FL_BAD_SENSE; + break; + case 'c': + f |= US_FL_FIX_CAPACITY; + break; + case 'd': + f |= US_FL_NO_READ_DISC_INFO; + break; + case 'e': + f |= US_FL_NO_READ_CAPACITY_16; + break; + case 'f': + f |= US_FL_NO_REPORT_OPCODES; + break; + case 'g': + f |= US_FL_MAX_SECTORS_240; + break; + case 'h': + f |= US_FL_CAPACITY_HEURISTICS; + break; + case 'i': + f |= US_FL_IGNORE_DEVICE; + break; + case 'l': + f |= US_FL_NOT_LOCKABLE; + break; + case 'm': + f |= US_FL_MAX_SECTORS_64; + break; + case 'n': + f |= US_FL_INITIAL_READ10; + break; + case 'o': + f |= US_FL_CAPACITY_OK; + break; + case 'p': + f |= US_FL_WRITE_CACHE; + break; + case 'r': + f |= US_FL_IGNORE_RESIDUE; + break; + case 's': + f |= US_FL_SINGLE_LUN; + break; + case 't': + f |= US_FL_NO_ATA_1X; + break; + case 'u': + f |= US_FL_IGNORE_UAS; + break; + case 'w': + f |= US_FL_NO_WP_DETECT; + break; + /* Ignore unrecognized flag characters */ + } + } + *fflags = (*fflags & ~mask) | f; +} +EXPORT_SYMBOL_GPL(usb_stor_adjust_quirks); + +/* Get the unusual_devs entries and the string descriptors */ +static int get_device_info(struct us_data *us, const struct usb_device_id *id, + struct us_unusual_dev *unusual_dev) +{ + struct usb_device *dev = us->pusb_dev; + struct usb_interface_descriptor *idesc = + &us->pusb_intf->cur_altsetting->desc; + struct device *pdev = &us->pusb_intf->dev; + + /* Store the entries */ + us->unusual_dev = unusual_dev; + us->subclass = (unusual_dev->useProtocol == USB_SC_DEVICE) ? + idesc->bInterfaceSubClass : + unusual_dev->useProtocol; + us->protocol = (unusual_dev->useTransport == USB_PR_DEVICE) ? + idesc->bInterfaceProtocol : + unusual_dev->useTransport; + us->fflags = id->driver_info; + usb_stor_adjust_quirks(us->pusb_dev, &us->fflags); + + if (us->fflags & US_FL_IGNORE_DEVICE) { + dev_info(pdev, "device ignored\n"); + return -ENODEV; + } + + /* + * This flag is only needed when we're in high-speed, so let's + * disable it if we're in full-speed + */ + if (dev->speed != USB_SPEED_HIGH) + us->fflags &= ~US_FL_GO_SLOW; + + if (us->fflags) + dev_info(pdev, "Quirks match for vid %04x pid %04x: %lx\n", + le16_to_cpu(dev->descriptor.idVendor), + le16_to_cpu(dev->descriptor.idProduct), + us->fflags); + + /* Log a message if a non-generic unusual_dev entry contains an + * unnecessary subclass or protocol override. This may stimulate + * reports from users that will help us remove unneeded entries + * from the unusual_devs.h table. + */ + if (id->idVendor || id->idProduct) { + static const char *msgs[3] = { + "an unneeded SubClass entry", + "an unneeded Protocol entry", + "unneeded SubClass and Protocol entries"}; + struct usb_device_descriptor *ddesc = &dev->descriptor; + int msg = -1; + + if (unusual_dev->useProtocol != USB_SC_DEVICE && + us->subclass == idesc->bInterfaceSubClass) + msg += 1; + if (unusual_dev->useTransport != USB_PR_DEVICE && + us->protocol == idesc->bInterfaceProtocol) + msg += 2; + if (msg >= 0 && !(us->fflags & US_FL_NEED_OVERRIDE)) + dev_notice(pdev, "This device " + "(%04x,%04x,%04x S %02x P %02x)" + " has %s in unusual_devs.h (kernel" + " %s)\n" + " Please send a copy of this message to " + "<linux-usb@vger.kernel.org> and " + "<usb-storage@lists.one-eyed-alien.net>\n", + le16_to_cpu(ddesc->idVendor), + le16_to_cpu(ddesc->idProduct), + le16_to_cpu(ddesc->bcdDevice), + idesc->bInterfaceSubClass, + idesc->bInterfaceProtocol, + msgs[msg], + utsname()->release); + } + + return 0; +} + +/* Get the transport settings */ +static void get_transport(struct us_data *us) +{ + switch (us->protocol) { + case USB_PR_CB: + us->transport_name = "Control/Bulk"; + us->transport = usb_stor_CB_transport; + us->transport_reset = usb_stor_CB_reset; + us->max_lun = 7; + break; + + case USB_PR_CBI: + us->transport_name = "Control/Bulk/Interrupt"; + us->transport = usb_stor_CB_transport; + us->transport_reset = usb_stor_CB_reset; + us->max_lun = 7; + break; + + case USB_PR_BULK: + us->transport_name = "Bulk"; + us->transport = usb_stor_Bulk_transport; + us->transport_reset = usb_stor_Bulk_reset; + break; + } +} + +/* Get the protocol settings */ +static void get_protocol(struct us_data *us) +{ + switch (us->subclass) { + case USB_SC_RBC: + us->protocol_name = "Reduced Block Commands (RBC)"; + us->proto_handler = usb_stor_transparent_scsi_command; + break; + + case USB_SC_8020: + us->protocol_name = "8020i"; + us->proto_handler = usb_stor_pad12_command; + us->max_lun = 0; + break; + + case USB_SC_QIC: + us->protocol_name = "QIC-157"; + us->proto_handler = usb_stor_pad12_command; + us->max_lun = 0; + break; + + case USB_SC_8070: + us->protocol_name = "8070i"; + us->proto_handler = usb_stor_pad12_command; + us->max_lun = 0; + break; + + case USB_SC_SCSI: + us->protocol_name = "Transparent SCSI"; + us->proto_handler = usb_stor_transparent_scsi_command; + break; + + case USB_SC_UFI: + us->protocol_name = "Uniform Floppy Interface (UFI)"; + us->proto_handler = usb_stor_ufi_command; + break; + } +} + +/* Get the pipe settings */ +static int get_pipes(struct us_data *us) +{ + struct usb_host_interface *altsetting = + us->pusb_intf->cur_altsetting; + int i; + struct usb_endpoint_descriptor *ep; + struct usb_endpoint_descriptor *ep_in = NULL; + struct usb_endpoint_descriptor *ep_out = NULL; + struct usb_endpoint_descriptor *ep_int = NULL; + + /* + * Find the first endpoint of each type we need. + * We are expecting a minimum of 2 endpoints - in and out (bulk). + * An optional interrupt-in is OK (necessary for CBI protocol). + * We will ignore any others. + */ + for (i = 0; i < altsetting->desc.bNumEndpoints; i++) { + ep = &altsetting->endpoint[i].desc; + + if (usb_endpoint_xfer_bulk(ep)) { + if (usb_endpoint_dir_in(ep)) { + if (!ep_in) + ep_in = ep; + } else { + if (!ep_out) + ep_out = ep; + } + } + + else if (usb_endpoint_is_int_in(ep)) { + if (!ep_int) + ep_int = ep; + } + } + + if (!ep_in || !ep_out || (us->protocol == USB_PR_CBI && !ep_int)) { + usb_stor_dbg(us, "Endpoint sanity check failed! Rejecting dev.\n"); + return -EIO; + } + + /* Calculate and store the pipe values */ + us->send_ctrl_pipe = usb_sndctrlpipe(us->pusb_dev, 0); + us->recv_ctrl_pipe = usb_rcvctrlpipe(us->pusb_dev, 0); + us->send_bulk_pipe = usb_sndbulkpipe(us->pusb_dev, + usb_endpoint_num(ep_out)); + us->recv_bulk_pipe = usb_rcvbulkpipe(us->pusb_dev, + usb_endpoint_num(ep_in)); + if (ep_int) { + us->recv_intr_pipe = usb_rcvintpipe(us->pusb_dev, + usb_endpoint_num(ep_int)); + us->ep_bInterval = ep_int->bInterval; + } + return 0; +} + +/* Initialize all the dynamic resources we need */ +static int usb_stor_acquire_resources(struct us_data *us) +{ + int p; + struct task_struct *th; + + us->current_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!us->current_urb) { + usb_stor_dbg(us, "URB allocation failed\n"); + return -ENOMEM; + } + + /* Just before we start our control thread, initialize + * the device if it needs initialization */ + if (us->unusual_dev->initFunction) { + p = us->unusual_dev->initFunction(us); + if (p) + return p; + } + + /* Start up our control thread */ + th = kthread_run(usb_stor_control_thread, us, "usb-storage"); + if (IS_ERR(th)) { + dev_warn(&us->pusb_intf->dev, + "Unable to start control thread\n"); + return PTR_ERR(th); + } + us->ctl_thread = th; + + return 0; +} + +/* Release all our dynamic resources */ +static void usb_stor_release_resources(struct us_data *us) +{ + /* Tell the control thread to exit. The SCSI host must + * already have been removed and the DISCONNECTING flag set + * so that we won't accept any more commands. + */ + usb_stor_dbg(us, "-- sending exit command to thread\n"); + complete(&us->cmnd_ready); + if (us->ctl_thread) + kthread_stop(us->ctl_thread); + + /* Call the destructor routine, if it exists */ + if (us->extra_destructor) { + usb_stor_dbg(us, "-- calling extra_destructor()\n"); + us->extra_destructor(us->extra); + } + + /* Free the extra data and the URB */ + kfree(us->extra); + usb_free_urb(us->current_urb); +} + +/* Dissociate from the USB device */ +static void dissociate_dev(struct us_data *us) +{ + /* Free the buffers */ + kfree(us->cr); + usb_free_coherent(us->pusb_dev, US_IOBUF_SIZE, us->iobuf, us->iobuf_dma); + + /* Remove our private data from the interface */ + usb_set_intfdata(us->pusb_intf, NULL); +} + +/* First stage of disconnect processing: stop SCSI scanning, + * remove the host, and stop accepting new commands + */ +static void quiesce_and_remove_host(struct us_data *us) +{ + struct Scsi_Host *host = us_to_host(us); + + /* If the device is really gone, cut short reset delays */ + if (us->pusb_dev->state == USB_STATE_NOTATTACHED) { + set_bit(US_FLIDX_DISCONNECTING, &us->dflags); + wake_up(&us->delay_wait); + } + + /* Prevent SCSI scanning (if it hasn't started yet) + * or wait for the SCSI-scanning routine to stop. + */ + cancel_delayed_work_sync(&us->scan_dwork); + + /* Balance autopm calls if scanning was cancelled */ + if (test_bit(US_FLIDX_SCAN_PENDING, &us->dflags)) + usb_autopm_put_interface_no_suspend(us->pusb_intf); + + /* Removing the host will perform an orderly shutdown: caches + * synchronized, disks spun down, etc. + */ + scsi_remove_host(host); + + /* Prevent any new commands from being accepted and cut short + * reset delays. + */ + scsi_lock(host); + set_bit(US_FLIDX_DISCONNECTING, &us->dflags); + scsi_unlock(host); + wake_up(&us->delay_wait); +} + +/* Second stage of disconnect processing: deallocate all resources */ +static void release_everything(struct us_data *us) +{ + usb_stor_release_resources(us); + dissociate_dev(us); + + /* Drop our reference to the host; the SCSI core will free it + * (and "us" along with it) when the refcount becomes 0. */ + scsi_host_put(us_to_host(us)); +} + +/* Delayed-work routine to carry out SCSI-device scanning */ +static void usb_stor_scan_dwork(struct work_struct *work) +{ + struct us_data *us = container_of(work, struct us_data, + scan_dwork.work); + struct device *dev = &us->pusb_intf->dev; + + dev_dbg(dev, "starting scan\n"); + + /* For bulk-only devices, determine the max LUN value */ + if (us->protocol == USB_PR_BULK && + !(us->fflags & US_FL_SINGLE_LUN) && + !(us->fflags & US_FL_SCM_MULT_TARG)) { + mutex_lock(&us->dev_mutex); + us->max_lun = usb_stor_Bulk_max_lun(us); + /* + * Allow proper scanning of devices that present more than 8 LUNs + * While not affecting other devices that may need the previous behavior + */ + if (us->max_lun >= 8) + us_to_host(us)->max_lun = us->max_lun+1; + mutex_unlock(&us->dev_mutex); + } + scsi_scan_host(us_to_host(us)); + dev_dbg(dev, "scan complete\n"); + + /* Should we unbind if no devices were detected? */ + + usb_autopm_put_interface(us->pusb_intf); + clear_bit(US_FLIDX_SCAN_PENDING, &us->dflags); +} + +static unsigned int usb_stor_sg_tablesize(struct usb_interface *intf) +{ + struct usb_device *usb_dev = interface_to_usbdev(intf); + + if (usb_dev->bus->sg_tablesize) { + return usb_dev->bus->sg_tablesize; + } + return SG_ALL; +} + +/* First part of general USB mass-storage probing */ +int usb_stor_probe1(struct us_data **pus, + struct usb_interface *intf, + const struct usb_device_id *id, + struct us_unusual_dev *unusual_dev) +{ + struct Scsi_Host *host; + struct us_data *us; + int result; + + dev_info(&intf->dev, "USB Mass Storage device detected\n"); + + /* + * Ask the SCSI layer to allocate a host structure, with extra + * space at the end for our private us_data structure. + */ + host = scsi_host_alloc(&usb_stor_host_template, sizeof(*us)); + if (!host) { + dev_warn(&intf->dev, "Unable to allocate the scsi host\n"); + return -ENOMEM; + } + + /* + * Allow 16-byte CDBs and thus > 2TB + */ + host->max_cmd_len = 16; + host->sg_tablesize = usb_stor_sg_tablesize(intf); + *pus = us = host_to_us(host); + mutex_init(&(us->dev_mutex)); + us_set_lock_class(&us->dev_mutex, intf); + init_completion(&us->cmnd_ready); + init_completion(&(us->notify)); + init_waitqueue_head(&us->delay_wait); + INIT_DELAYED_WORK(&us->scan_dwork, usb_stor_scan_dwork); + + /* Associate the us_data structure with the USB device */ + result = associate_dev(us, intf); + if (result) + goto BadDevice; + + /* Get the unusual_devs entries and the descriptors */ + result = get_device_info(us, id, unusual_dev); + if (result) + goto BadDevice; + + /* Get standard transport and protocol settings */ + get_transport(us); + get_protocol(us); + + /* Give the caller a chance to fill in specialized transport + * or protocol settings. + */ + return 0; + +BadDevice: + usb_stor_dbg(us, "storage_probe() failed\n"); + release_everything(us); + return result; +} +EXPORT_SYMBOL_GPL(usb_stor_probe1); + +/* Second part of general USB mass-storage probing */ +int usb_stor_probe2(struct us_data *us) +{ + int result; + struct device *dev = &us->pusb_intf->dev; + + /* Make sure the transport and protocol have both been set */ + if (!us->transport || !us->proto_handler) { + result = -ENXIO; + goto BadDevice; + } + usb_stor_dbg(us, "Transport: %s\n", us->transport_name); + usb_stor_dbg(us, "Protocol: %s\n", us->protocol_name); + + if (us->fflags & US_FL_SCM_MULT_TARG) { + /* + * SCM eUSCSI bridge devices can have different numbers + * of LUNs on different targets; allow all to be probed. + */ + us->max_lun = 7; + /* The eUSCSI itself has ID 7, so avoid scanning that */ + us_to_host(us)->this_id = 7; + /* max_id is 8 initially, so no need to set it here */ + } else { + /* In the normal case there is only a single target */ + us_to_host(us)->max_id = 1; + /* + * Like Windows, we won't store the LUN bits in CDB[1] for + * SCSI-2 devices using the Bulk-Only transport (even though + * this violates the SCSI spec). + */ + if (us->transport == usb_stor_Bulk_transport) + us_to_host(us)->no_scsi2_lun_in_cdb = 1; + } + + /* fix for single-lun devices */ + if (us->fflags & US_FL_SINGLE_LUN) + us->max_lun = 0; + + /* Find the endpoints and calculate pipe values */ + result = get_pipes(us); + if (result) + goto BadDevice; + + /* + * If the device returns invalid data for the first READ(10) + * command, indicate the command should be retried. + */ + if (us->fflags & US_FL_INITIAL_READ10) + set_bit(US_FLIDX_REDO_READ10, &us->dflags); + + /* Acquire all the other resources and add the host */ + result = usb_stor_acquire_resources(us); + if (result) + goto BadDevice; + snprintf(us->scsi_name, sizeof(us->scsi_name), "usb-storage %s", + dev_name(&us->pusb_intf->dev)); + result = scsi_add_host(us_to_host(us), dev); + if (result) { + dev_warn(dev, + "Unable to add the scsi host\n"); + goto BadDevice; + } + + /* Submit the delayed_work for SCSI-device scanning */ + usb_autopm_get_interface_no_resume(us->pusb_intf); + set_bit(US_FLIDX_SCAN_PENDING, &us->dflags); + + if (delay_use > 0) + dev_dbg(dev, "waiting for device to settle before scanning\n"); + queue_delayed_work(system_freezable_wq, &us->scan_dwork, + delay_use * HZ); + return 0; + + /* We come here if there are any problems */ +BadDevice: + usb_stor_dbg(us, "storage_probe() failed\n"); + release_everything(us); + return result; +} +EXPORT_SYMBOL_GPL(usb_stor_probe2); + +/* Handle a USB mass-storage disconnect */ +void usb_stor_disconnect(struct usb_interface *intf) +{ + struct us_data *us = usb_get_intfdata(intf); + + quiesce_and_remove_host(us); + release_everything(us); +} +EXPORT_SYMBOL_GPL(usb_stor_disconnect); + +/* The main probe routine for standard devices */ +static int storage_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct us_unusual_dev *unusual_dev; + struct us_data *us; + int result; + int size; + + /* If uas is enabled and this device can do uas then ignore it. */ +#if IS_ENABLED(CONFIG_USB_UAS) + if (uas_use_uas_driver(intf, id, NULL)) + return -ENXIO; +#endif + + /* + * If the device isn't standard (is handled by a subdriver + * module) then don't accept it. + */ + if (usb_usual_ignore_device(intf)) + return -ENXIO; + + /* + * Call the general probe procedures. + * + * The unusual_dev_list array is parallel to the usb_storage_usb_ids + * table, so we use the index of the id entry to find the + * corresponding unusual_devs entry. + */ + + size = ARRAY_SIZE(us_unusual_dev_list); + if (id >= usb_storage_usb_ids && id < usb_storage_usb_ids + size) { + unusual_dev = (id - usb_storage_usb_ids) + us_unusual_dev_list; + } else { + unusual_dev = &for_dynamic_ids; + + dev_dbg(&intf->dev, "Use Bulk-Only transport with the Transparent SCSI protocol for dynamic id: 0x%04x 0x%04x\n", + id->idVendor, id->idProduct); + } + + result = usb_stor_probe1(&us, intf, id, unusual_dev); + if (result) + return result; + + /* No special transport or protocol settings in the main module */ + + result = usb_stor_probe2(us); + return result; +} + +static struct usb_driver usb_storage_driver = { + .name = "usb-storage", + .probe = storage_probe, + .disconnect = usb_stor_disconnect, + .suspend = usb_stor_suspend, + .resume = usb_stor_resume, + .reset_resume = usb_stor_reset_resume, + .pre_reset = usb_stor_pre_reset, + .post_reset = usb_stor_post_reset, + .id_table = usb_storage_usb_ids, + .supports_autosuspend = 1, + .soft_unbind = 1, +}; + +module_usb_driver(usb_storage_driver); diff --git a/kernel/drivers/usb/storage/usb.h b/kernel/drivers/usb/storage/usb.h new file mode 100644 index 000000000..307e339a9 --- /dev/null +++ b/kernel/drivers/usb/storage/usb.h @@ -0,0 +1,207 @@ +/* Driver for USB Mass Storage compliant devices + * Main Header File + * + * Current development and maintenance by: + * (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net) + * + * Initial work by: + * (c) 1999 Michael Gee (michael@linuxspecific.com) + * + * This driver is based on the 'USB Mass Storage Class' document. This + * describes in detail the protocol used to communicate with such + * devices. Clearly, the designers had SCSI and ATAPI commands in + * mind when they created this document. The commands are all very + * similar to commands in the SCSI-II and ATAPI specifications. + * + * It is important to note that in a number of cases this class + * exhibits class-specific exemptions from the USB specification. + * Notably the usage of NAK, STALL and ACK differs from the norm, in + * that they are used to communicate wait, failed and OK on commands. + * + * Also, for certain devices, the interrupt endpoint is used to convey + * status of a command. + * + * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more + * information about this driver. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _USB_H_ +#define _USB_H_ + +#include <linux/usb.h> +#include <linux/usb_usual.h> +#include <linux/blkdev.h> +#include <linux/completion.h> +#include <linux/mutex.h> +#include <linux/workqueue.h> +#include <scsi/scsi_host.h> + +struct us_data; +struct scsi_cmnd; + +/* + * Unusual device list definitions + */ + +struct us_unusual_dev { + const char* vendorName; + const char* productName; + __u8 useProtocol; + __u8 useTransport; + int (*initFunction)(struct us_data *); +}; + + +/* Dynamic bitflag definitions (us->dflags): used in set_bit() etc. */ +#define US_FLIDX_URB_ACTIVE 0 /* current_urb is in use */ +#define US_FLIDX_SG_ACTIVE 1 /* current_sg is in use */ +#define US_FLIDX_ABORTING 2 /* abort is in progress */ +#define US_FLIDX_DISCONNECTING 3 /* disconnect in progress */ +#define US_FLIDX_RESETTING 4 /* device reset in progress */ +#define US_FLIDX_TIMED_OUT 5 /* SCSI midlayer timed out */ +#define US_FLIDX_SCAN_PENDING 6 /* scanning not yet done */ +#define US_FLIDX_REDO_READ10 7 /* redo READ(10) command */ +#define US_FLIDX_READ10_WORKED 8 /* previous READ(10) succeeded */ + +#define USB_STOR_STRING_LEN 32 + +/* + * We provide a DMA-mapped I/O buffer for use with small USB transfers. + * It turns out that CB[I] needs a 12-byte buffer and Bulk-only needs a + * 31-byte buffer. But Freecom needs a 64-byte buffer, so that's the + * size we'll allocate. + */ + +#define US_IOBUF_SIZE 64 /* Size of the DMA-mapped I/O buffer */ +#define US_SENSE_SIZE 18 /* Size of the autosense data buffer */ + +typedef int (*trans_cmnd)(struct scsi_cmnd *, struct us_data*); +typedef int (*trans_reset)(struct us_data*); +typedef void (*proto_cmnd)(struct scsi_cmnd*, struct us_data*); +typedef void (*extra_data_destructor)(void *); /* extra data destructor */ +typedef void (*pm_hook)(struct us_data *, int); /* power management hook */ + +#define US_SUSPEND 0 +#define US_RESUME 1 + +/* we allocate one of these for every device that we remember */ +struct us_data { + /* The device we're working with + * It's important to note: + * (o) you must hold dev_mutex to change pusb_dev + */ + struct mutex dev_mutex; /* protect pusb_dev */ + struct usb_device *pusb_dev; /* this usb_device */ + struct usb_interface *pusb_intf; /* this interface */ + struct us_unusual_dev *unusual_dev; /* device-filter entry */ + unsigned long fflags; /* fixed flags from filter */ + unsigned long dflags; /* dynamic atomic bitflags */ + unsigned int send_bulk_pipe; /* cached pipe values */ + unsigned int recv_bulk_pipe; + unsigned int send_ctrl_pipe; + unsigned int recv_ctrl_pipe; + unsigned int recv_intr_pipe; + + /* information about the device */ + char *transport_name; + char *protocol_name; + __le32 bcs_signature; + u8 subclass; + u8 protocol; + u8 max_lun; + + u8 ifnum; /* interface number */ + u8 ep_bInterval; /* interrupt interval */ + + /* function pointers for this device */ + trans_cmnd transport; /* transport function */ + trans_reset transport_reset; /* transport device reset */ + proto_cmnd proto_handler; /* protocol handler */ + + /* SCSI interfaces */ + struct scsi_cmnd *srb; /* current srb */ + unsigned int tag; /* current dCBWTag */ + char scsi_name[32]; /* scsi_host name */ + + /* control and bulk communications data */ + struct urb *current_urb; /* USB requests */ + struct usb_ctrlrequest *cr; /* control requests */ + struct usb_sg_request current_sg; /* scatter-gather req. */ + unsigned char *iobuf; /* I/O buffer */ + dma_addr_t iobuf_dma; /* buffer DMA addresses */ + struct task_struct *ctl_thread; /* the control thread */ + + /* mutual exclusion and synchronization structures */ + struct completion cmnd_ready; /* to sleep thread on */ + struct completion notify; /* thread begin/end */ + wait_queue_head_t delay_wait; /* wait during reset */ + struct delayed_work scan_dwork; /* for async scanning */ + + /* subdriver information */ + void *extra; /* Any extra data */ + extra_data_destructor extra_destructor;/* extra data destructor */ +#ifdef CONFIG_PM + pm_hook suspend_resume_hook; +#endif + + /* hacks for READ CAPACITY bug handling */ + int use_last_sector_hacks; + int last_sector_retries; +}; + +/* Convert between us_data and the corresponding Scsi_Host */ +static inline struct Scsi_Host *us_to_host(struct us_data *us) { + return container_of((void *) us, struct Scsi_Host, hostdata); +} +static inline struct us_data *host_to_us(struct Scsi_Host *host) { + return (struct us_data *) host->hostdata; +} + +/* Function to fill an inquiry response. See usb.c for details */ +extern void fill_inquiry_response(struct us_data *us, + unsigned char *data, unsigned int data_len); + +/* The scsi_lock() and scsi_unlock() macros protect the sm_state and the + * single queue element srb for write access */ +#define scsi_unlock(host) spin_unlock_irq(host->host_lock) +#define scsi_lock(host) spin_lock_irq(host->host_lock) + +/* General routines provided by the usb-storage standard core */ +#ifdef CONFIG_PM +extern int usb_stor_suspend(struct usb_interface *iface, pm_message_t message); +extern int usb_stor_resume(struct usb_interface *iface); +extern int usb_stor_reset_resume(struct usb_interface *iface); +#else +#define usb_stor_suspend NULL +#define usb_stor_resume NULL +#define usb_stor_reset_resume NULL +#endif + +extern int usb_stor_pre_reset(struct usb_interface *iface); +extern int usb_stor_post_reset(struct usb_interface *iface); + +extern int usb_stor_probe1(struct us_data **pus, + struct usb_interface *intf, + const struct usb_device_id *id, + struct us_unusual_dev *unusual_dev); +extern int usb_stor_probe2(struct us_data *us); +extern void usb_stor_disconnect(struct usb_interface *intf); + +extern void usb_stor_adjust_quirks(struct usb_device *dev, + unsigned long *fflags); + +#endif diff --git a/kernel/drivers/usb/storage/usual-tables.c b/kernel/drivers/usb/storage/usual-tables.c new file mode 100644 index 000000000..5ef8ce74a --- /dev/null +++ b/kernel/drivers/usb/storage/usual-tables.c @@ -0,0 +1,123 @@ +/* Driver for USB Mass Storage devices + * Usual Tables File for usb-storage and libusual + * + * Copyright (C) 2009 Alan Stern (stern@rowland.harvard.edu) + * + * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more + * information about this driver. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/usb.h> +#include <linux/usb_usual.h> + + +/* + * The table of devices + */ +#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ + vendorName, productName, useProtocol, useTransport, \ + initFunction, flags) \ +{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ + .driver_info = (flags) } + +#define COMPLIANT_DEV UNUSUAL_DEV + +#define USUAL_DEV(useProto, useTrans) \ +{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, useProto, useTrans) } + +/* Define the device is matched with Vendor ID and interface descriptors */ +#define UNUSUAL_VENDOR_INTF(id_vendor, cl, sc, pr, \ + vendorName, productName, useProtocol, useTransport, \ + initFunction, flags) \ +{ \ + .match_flags = USB_DEVICE_ID_MATCH_INT_INFO \ + | USB_DEVICE_ID_MATCH_VENDOR, \ + .idVendor = (id_vendor), \ + .bInterfaceClass = (cl), \ + .bInterfaceSubClass = (sc), \ + .bInterfaceProtocol = (pr), \ + .driver_info = (flags) \ +} + +struct usb_device_id usb_storage_usb_ids[] = { +# include "unusual_devs.h" + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, usb_storage_usb_ids); + +#undef UNUSUAL_DEV +#undef COMPLIANT_DEV +#undef USUAL_DEV +#undef UNUSUAL_VENDOR_INTF + +/* + * The table of devices to ignore + */ +struct ignore_entry { + u16 vid, pid, bcdmin, bcdmax; +}; + +#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ + vendorName, productName, useProtocol, useTransport, \ + initFunction, flags) \ +{ \ + .vid = id_vendor, \ + .pid = id_product, \ + .bcdmin = bcdDeviceMin, \ + .bcdmax = bcdDeviceMax, \ +} + +static struct ignore_entry ignore_ids[] = { +# include "unusual_alauda.h" +# include "unusual_cypress.h" +# include "unusual_datafab.h" +# include "unusual_ene_ub6250.h" +# include "unusual_freecom.h" +# include "unusual_isd200.h" +# include "unusual_jumpshot.h" +# include "unusual_karma.h" +# include "unusual_onetouch.h" +# include "unusual_realtek.h" +# include "unusual_sddr09.h" +# include "unusual_sddr55.h" +# include "unusual_usbat.h" + { } /* Terminating entry */ +}; + +#undef UNUSUAL_DEV + +/* Return an error if a device is in the ignore_ids list */ +int usb_usual_ignore_device(struct usb_interface *intf) +{ + struct usb_device *udev; + unsigned vid, pid, bcd; + struct ignore_entry *p; + + udev = interface_to_usbdev(intf); + vid = le16_to_cpu(udev->descriptor.idVendor); + pid = le16_to_cpu(udev->descriptor.idProduct); + bcd = le16_to_cpu(udev->descriptor.bcdDevice); + + for (p = ignore_ids; p->vid; ++p) { + if (p->vid == vid && p->pid == pid && + p->bcdmin <= bcd && p->bcdmax >= bcd) + return -ENXIO; + } + return 0; +} |