Upgrade to 4.4.50-rt62

The current kernel is based on rt kernel v4.4.6-rt14. We will upgrade it
to 4.4.50-rt62.
The command to achieve it is:
a) Clone a git repo from
git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-stable-rt.git

b) Get the diff between this two changesets:
git diff 640eca2901f3435e616157b11379d3223a44b391
705619beeea1b0b48219a683fd1a901a86fdaf5e

where the two commits are:
[yjiang5@jnakajim-build linux-stable-rt]$ git show --oneline --name-only
640eca2901f3435e616157b11379d3223a44b391
640eca2901f3 v4.4.6-rt14
localversion-rt
[yjiang5@jnakajim-build linux-stable-rt]$ git show --oneline --name-only
705619beeea1b0b48219a683fd1a901a86fdaf5e
705619beeea1 Linux 4.4.50-rt62
localversion-rt

c) One patch has been backported thus revert the patch before applying.

 filterdiff -p1 -x scripts/package/Makefile
~/tmp/v4.4.6-rt14-4.4.50-rt62.diff  |patch -p1 --dry-run

Upstream status: backport

Change-Id: I244d57a32f6066e5a5b9915f9fbf99e7bbca6e01
Signed-off-by: Yunhong Jiang <yunhong.jiang@linux.intel.com>

30 files changed, 588 insertions, 125 deletions

diff --git a/kernel/drivers/usb/serial/ch341.c b/kernel/drivers/usb/serial/ch341.c
index c73808f09..71133d96f 100644
--- a/kernel/drivers/usb/serial/ch341.c
+++ b/kernel/drivers/usb/serial/ch341.c
@@ -99,6 +99,8 @@ static int ch341_control_out(struct usb_device *dev, u8 request,
 	r = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), request,
 			    USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
 			    value, index, NULL, 0, DEFAULT_TIMEOUT);
+	if (r < 0)
+		dev_err(&dev->dev, "failed to send control message: %d\n", r);
 
 	return r;
 }
@@ -116,7 +118,20 @@ static int ch341_control_in(struct usb_device *dev,
 	r = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), request,
 			    USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
 			    value, index, buf, bufsize, DEFAULT_TIMEOUT);
-	return r;
+	if (r < bufsize) {
+		if (r >= 0) {
+			dev_err(&dev->dev,
+				"short control message received (%d < %u)\n",
+				r, bufsize);
+			r = -EIO;
+		}
+
+		dev_err(&dev->dev, "failed to receive control message: %d\n",
+			r);
+		return r;
+	}
+
+	return 0;
 }
 
 static int ch341_set_baudrate(struct usb_device *dev,
@@ -158,9 +173,9 @@ static int ch341_set_handshake(struct usb_device *dev, u8 control)
 
 static int ch341_get_status(struct usb_device *dev, struct ch341_private *priv)
 {
+	const unsigned int size = 2;
 	char *buffer;
 	int r;
-	const unsigned size = 8;
 	unsigned long flags;
 
 	buffer = kmalloc(size, GFP_KERNEL);
@@ -171,14 +186,9 @@ static int ch341_get_status(struct usb_device *dev, struct ch341_private *priv)
 	if (r < 0)
 		goto out;
 
-	/* setup the private status if available */
-	if (r == 2) {
-		r = 0;
-		spin_lock_irqsave(&priv->lock, flags);
-		priv->line_status = (~(*buffer)) & CH341_BITS_MODEM_STAT;
-		spin_unlock_irqrestore(&priv->lock, flags);
-	} else
-		r = -EPROTO;
+	spin_lock_irqsave(&priv->lock, flags);
+	priv->line_status = (~(*buffer)) & CH341_BITS_MODEM_STAT;
+	spin_unlock_irqrestore(&priv->lock, flags);
 
 out:	kfree(buffer);
 	return r;
@@ -188,9 +198,9 @@ out:	kfree(buffer);
 
 static int ch341_configure(struct usb_device *dev, struct ch341_private *priv)
 {
+	const unsigned int size = 2;
 	char *buffer;
 	int r;
-	const unsigned size = 8;
 
 	buffer = kmalloc(size, GFP_KERNEL);
 	if (!buffer)
@@ -253,7 +263,6 @@ static int ch341_port_probe(struct usb_serial_port *port)
 
 	spin_lock_init(&priv->lock);
 	priv->baud_rate = DEFAULT_BAUD_RATE;
-	priv->line_control = CH341_BIT_RTS | CH341_BIT_DTR;
 
 	r = ch341_configure(port->serial->dev, priv);
 	if (r < 0)
@@ -315,7 +324,7 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port)
 
 	r = ch341_configure(serial->dev, priv);
 	if (r)
-		goto out;
+		return r;
 
 	if (tty)
 		ch341_set_termios(tty, port, NULL);
@@ -325,12 +334,19 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port)
 	if (r) {
 		dev_err(&port->dev, "%s - failed to submit interrupt urb: %d\n",
 			__func__, r);
-		goto out;
+		return r;
 	}
 
 	r = usb_serial_generic_open(tty, port);
+	if (r)
+		goto err_kill_interrupt_urb;
 
-out:	return r;
+	return 0;
+
+err_kill_interrupt_urb:
+	usb_kill_urb(port->interrupt_in_urb);
+
+	return r;
 }
 
 /* Old_termios contains the original termios settings and
@@ -345,26 +361,25 @@ static void ch341_set_termios(struct tty_struct *tty,
 
 	baud_rate = tty_get_baud_rate(tty);
 
-	priv->baud_rate = baud_rate;
-
 	if (baud_rate) {
-		spin_lock_irqsave(&priv->lock, flags);
-		priv->line_control |= (CH341_BIT_DTR | CH341_BIT_RTS);
-		spin_unlock_irqrestore(&priv->lock, flags);
+		priv->baud_rate = baud_rate;
 		ch341_set_baudrate(port->serial->dev, priv);
-	} else {
-		spin_lock_irqsave(&priv->lock, flags);
-		priv->line_control &= ~(CH341_BIT_DTR | CH341_BIT_RTS);
-		spin_unlock_irqrestore(&priv->lock, flags);
 	}
 
-	ch341_set_handshake(port->serial->dev, priv->line_control);
-
 	/* Unimplemented:
 	 * (cflag & CSIZE) : data bits [5, 8]
 	 * (cflag & PARENB) : parity {NONE, EVEN, ODD}
 	 * (cflag & CSTOPB) : stop bits [1, 2]
 	 */
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (C_BAUD(tty) == B0)
+		priv->line_control &= ~(CH341_BIT_DTR | CH341_BIT_RTS);
+	else if (old_termios && (old_termios->c_cflag & CBAUD) == B0)
+		priv->line_control |= (CH341_BIT_DTR | CH341_BIT_RTS);
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	ch341_set_handshake(port->serial->dev, priv->line_control);
 }
 
 static void ch341_break_ctl(struct tty_struct *tty, int break_state)
@@ -539,14 +554,23 @@ static int ch341_tiocmget(struct tty_struct *tty)
 
 static int ch341_reset_resume(struct usb_serial *serial)
 {
-	struct ch341_private *priv;
-
-	priv = usb_get_serial_port_data(serial->port[0]);
+	struct usb_serial_port *port = serial->port[0];
+	struct ch341_private *priv = usb_get_serial_port_data(port);
+	int ret;
 
 	/* reconfigure ch341 serial port after bus-reset */
 	ch341_configure(serial->dev, priv);
 
-	return 0;
+	if (test_bit(ASYNCB_INITIALIZED, &port->port.flags)) {
+		ret = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO);
+		if (ret) {
+			dev_err(&port->dev, "failed to submit interrupt urb: %d\n",
+				ret);
+			return ret;
+		}
+	}
+
+	return usb_serial_generic_resume(serial);
 }
 
 static struct usb_serial_driver ch341_device = {
diff --git a/kernel/drivers/usb/serial/cp210x.c b/kernel/drivers/usb/serial/cp210x.c
index 7a76fe4c2..fe7452f0f 100644
--- a/kernel/drivers/usb/serial/cp210x.c
+++ b/kernel/drivers/usb/serial/cp210x.c
@@ -108,6 +108,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demonstration module */
 	{ USB_DEVICE(0x10C4, 0x8281) }, /* Nanotec Plug & Drive */
 	{ USB_DEVICE(0x10C4, 0x8293) }, /* Telegesis ETRX2USB */
+	{ USB_DEVICE(0x10C4, 0x82F4) }, /* Starizona MicroTouch */
 	{ USB_DEVICE(0x10C4, 0x82F9) }, /* Procyon AVS */
 	{ USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
 	{ USB_DEVICE(0x10C4, 0x8382) }, /* Cygnal Integrated Products, Inc. */
@@ -116,7 +117,9 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x10C4, 0x8411) }, /* Kyocera GPS Module */
 	{ USB_DEVICE(0x10C4, 0x8418) }, /* IRZ Automation Teleport SG-10 GSM/GPRS Modem */
 	{ USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */
+	{ USB_DEVICE(0x10C4, 0x8470) }, /* Juniper Networks BX Series System Console */
 	{ USB_DEVICE(0x10C4, 0x8477) }, /* Balluff RFID */
+	{ USB_DEVICE(0x10C4, 0x84B6) }, /* Starizona Hyperion */
 	{ USB_DEVICE(0x10C4, 0x85EA) }, /* AC-Services IBUS-IF */
 	{ USB_DEVICE(0x10C4, 0x85EB) }, /* AC-Services CIS-IBUS */
 	{ USB_DEVICE(0x10C4, 0x85F8) }, /* Virtenio Preon32 */
@@ -127,6 +130,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x10C4, 0x88A4) }, /* MMB Networks ZigBee USB Device */
 	{ USB_DEVICE(0x10C4, 0x88A5) }, /* Planet Innovation Ingeni ZigBee USB Device */
 	{ USB_DEVICE(0x10C4, 0x8946) }, /* Ketra N1 Wireless Interface */
+	{ USB_DEVICE(0x10C4, 0x8962) }, /* Brim Brothers charging dock */
 	{ USB_DEVICE(0x10C4, 0x8977) },	/* CEL MeshWorks DevKit Device */
 	{ USB_DEVICE(0x10C4, 0x8998) }, /* KCF Technologies PRN */
 	{ USB_DEVICE(0x10C4, 0x8A2A) }, /* HubZ dual ZigBee and Z-Wave dongle */
@@ -140,6 +144,8 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x10C4, 0xF004) }, /* Elan Digital Systems USBcount50 */
 	{ USB_DEVICE(0x10C5, 0xEA61) }, /* Silicon Labs MobiData GPRS USB Modem */
 	{ USB_DEVICE(0x10CE, 0xEA6A) }, /* Silicon Labs MobiData GPRS USB Modem 100EU */
+	{ USB_DEVICE(0x12B8, 0xEC60) }, /* Link G4 ECU */
+	{ USB_DEVICE(0x12B8, 0xEC62) }, /* Link G4+ ECU */
 	{ USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */
 	{ USB_DEVICE(0x1555, 0x0004) }, /* Owen AC4 USB-RS485 Converter */
 	{ USB_DEVICE(0x166A, 0x0201) }, /* Clipsal 5500PACA C-Bus Pascal Automation Controller */
@@ -164,6 +170,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x18EF, 0xE025) }, /* ELV Marble Sound Board 1 */
 	{ USB_DEVICE(0x1901, 0x0190) }, /* GE B850 CP2105 Recorder interface */
 	{ USB_DEVICE(0x1901, 0x0193) }, /* GE B650 CP2104 PMC interface */
+	{ USB_DEVICE(0x1901, 0x0194) },	/* GE Healthcare Remote Alarm Box */
 	{ USB_DEVICE(0x19CF, 0x3000) }, /* Parrot NMEA GPS Flight Recorder */
 	{ USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */
 	{ USB_DEVICE(0x1B1C, 0x1C00) }, /* Corsair USB Dongle */
@@ -779,7 +786,7 @@ static void cp210x_set_termios(struct tty_struct *tty,
 		} else {
 			modem_ctl[0] &= ~0x7B;
 			modem_ctl[0] |= 0x01;
-			modem_ctl[1] |= 0x40;
+			modem_ctl[1] = 0x40;
 			dev_dbg(dev, "%s - flow control = NONE\n", __func__);
 		}
 
@@ -839,7 +846,9 @@ static int cp210x_tiocmget(struct tty_struct *tty)
 	unsigned int control;
 	int result;
 
-	cp210x_get_config(port, CP210X_GET_MDMSTS, &control, 1);
+	result = cp210x_get_config(port, CP210X_GET_MDMSTS, &control, 1);
+	if (result)
+		return result;
 
 	result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0)
 		|((control & CONTROL_RTS) ? TIOCM_RTS : 0)
diff --git a/kernel/drivers/usb/serial/cyberjack.c b/kernel/drivers/usb/serial/cyberjack.c
index 2916dea3e..8948f375e 100644
--- a/kernel/drivers/usb/serial/cyberjack.c
+++ b/kernel/drivers/usb/serial/cyberjack.c
@@ -50,6 +50,7 @@
 #define CYBERJACK_PRODUCT_ID	0x0100
 
 /* Function prototypes */
+static int cyberjack_attach(struct usb_serial *serial);
 static int cyberjack_port_probe(struct usb_serial_port *port);
 static int cyberjack_port_remove(struct usb_serial_port *port);
 static int  cyberjack_open(struct tty_struct *tty,
@@ -77,6 +78,7 @@ static struct usb_serial_driver cyberjack_device = {
 	.description =		"Reiner SCT Cyberjack USB card reader",
 	.id_table =		id_table,
 	.num_ports =		1,
+	.attach =		cyberjack_attach,
 	.port_probe =		cyberjack_port_probe,
 	.port_remove =		cyberjack_port_remove,
 	.open =			cyberjack_open,
@@ -100,6 +102,14 @@ struct cyberjack_private {
 	short		wrsent;		/* Data already sent */
 };
 
+static int cyberjack_attach(struct usb_serial *serial)
+{
+	if (serial->num_bulk_out < serial->num_ports)
+		return -ENODEV;
+
+	return 0;
+}
+
 static int cyberjack_port_probe(struct usb_serial_port *port)
 {
 	struct cyberjack_private *priv;
diff --git a/kernel/drivers/usb/serial/cypress_m8.c b/kernel/drivers/usb/serial/cypress_m8.c
index 01bf53392..244acb129 100644
--- a/kernel/drivers/usb/serial/cypress_m8.c
+++ b/kernel/drivers/usb/serial/cypress_m8.c
@@ -447,6 +447,11 @@ static int cypress_generic_port_probe(struct usb_serial_port *port)
 	struct usb_serial *serial = port->serial;
 	struct cypress_private *priv;
 
+	if (!port->interrupt_out_urb || !port->interrupt_in_urb) {
+		dev_err(&port->dev, "required endpoint is missing\n");
+		return -ENODEV;
+	}
+
 	priv = kzalloc(sizeof(struct cypress_private), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
@@ -606,12 +611,6 @@ static int cypress_open(struct tty_struct *tty, struct usb_serial_port *port)
 		cypress_set_termios(tty, port, &priv->tmp_termios);
 
 	/* setup the port and start reading from the device */
-	if (!port->interrupt_in_urb) {
-		dev_err(&port->dev, "%s - interrupt_in_urb is empty!\n",
-			__func__);
-		return -1;
-	}
-
 	usb_fill_int_urb(port->interrupt_in_urb, serial->dev,
 		usb_rcvintpipe(serial->dev, port->interrupt_in_endpointAddress),
 		port->interrupt_in_urb->transfer_buffer,
diff --git a/kernel/drivers/usb/serial/digi_acceleport.c b/kernel/drivers/usb/serial/digi_acceleport.c
index 12b0e6747..3df7b7ec1 100644
--- a/kernel/drivers/usb/serial/digi_acceleport.c
+++ b/kernel/drivers/usb/serial/digi_acceleport.c
@@ -1251,8 +1251,27 @@ static int digi_port_init(struct usb_serial_port *port, unsigned port_num)
 
 static int digi_startup(struct usb_serial *serial)
 {
+	struct device *dev = &serial->interface->dev;
 	struct digi_serial *serial_priv;
 	int ret;
+	int i;
+
+	/* check whether the device has the expected number of endpoints */
+	if (serial->num_port_pointers < serial->type->num_ports + 1) {
+		dev_err(dev, "OOB endpoints missing\n");
+		return -ENODEV;
+	}
+
+	for (i = 0; i < serial->type->num_ports + 1 ; i++) {
+		if (!serial->port[i]->read_urb) {
+			dev_err(dev, "bulk-in endpoint missing\n");
+			return -ENODEV;
+		}
+		if (!serial->port[i]->write_urb) {
+			dev_err(dev, "bulk-out endpoint missing\n");
+			return -ENODEV;
+		}
+	}
 
 	serial_priv = kzalloc(sizeof(*serial_priv), GFP_KERNEL);
 	if (!serial_priv)
diff --git a/kernel/drivers/usb/serial/ftdi_sio.c b/kernel/drivers/usb/serial/ftdi_sio.c
index 8c660ae40..d3d6ec455 100644
--- a/kernel/drivers/usb/serial/ftdi_sio.c
+++ b/kernel/drivers/usb/serial/ftdi_sio.c
@@ -648,6 +648,8 @@ static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_TFD128_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_FM3RX_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS777_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_PALMSENS_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_IVIUM_XSTAT_PID) },
 	{ USB_DEVICE(FTDI_VID, LINX_SDMUSBQSS_PID) },
 	{ USB_DEVICE(FTDI_VID, LINX_MASTERDEVEL2_PID) },
 	{ USB_DEVICE(FTDI_VID, LINX_FUTURE_0_PID) },
@@ -984,7 +986,8 @@ static const struct usb_device_id id_table_combined[] = {
 	/* ekey Devices */
 	{ USB_DEVICE(FTDI_VID, FTDI_EKEY_CONV_USB_PID) },
 	/* Infineon Devices */
-	{ USB_DEVICE_INTERFACE_NUMBER(INFINEON_VID, INFINEON_TRIBOARD_PID, 1) },
+	{ USB_DEVICE_INTERFACE_NUMBER(INFINEON_VID, INFINEON_TRIBOARD_TC1798_PID, 1) },
+	{ USB_DEVICE_INTERFACE_NUMBER(INFINEON_VID, INFINEON_TRIBOARD_TC2X7_PID, 1) },
 	/* GE Healthcare devices */
 	{ USB_DEVICE(GE_HEALTHCARE_VID, GE_HEALTHCARE_NEMO_TRACKER_PID) },
 	/* Active Research (Actisense) devices */
@@ -1004,6 +1007,13 @@ static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE(FTDI_VID, CHETCO_SEASMART_DISPLAY_PID) },
 	{ USB_DEVICE(FTDI_VID, CHETCO_SEASMART_LITE_PID) },
 	{ USB_DEVICE(FTDI_VID, CHETCO_SEASMART_ANALOG_PID) },
+	/* ICP DAS I-756xU devices */
+	{ USB_DEVICE(ICPDAS_VID, ICPDAS_I7560U_PID) },
+	{ USB_DEVICE(ICPDAS_VID, ICPDAS_I7561U_PID) },
+	{ USB_DEVICE(ICPDAS_VID, ICPDAS_I7563U_PID) },
+	{ USB_DEVICE(WICED_VID, WICED_USB20706V2_PID) },
+	{ USB_DEVICE(TI_VID, TI_CC3200_LAUNCHPAD_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ }					/* Terminating entry */
 };
 
diff --git a/kernel/drivers/usb/serial/ftdi_sio_ids.h b/kernel/drivers/usb/serial/ftdi_sio_ids.h
index a84df2513..48ee04c94 100644
--- a/kernel/drivers/usb/serial/ftdi_sio_ids.h
+++ b/kernel/drivers/usb/serial/ftdi_sio_ids.h
@@ -406,6 +406,12 @@
 #define FTDI_4N_GALAXY_DE_3_PID	0xF3C2
 
 /*
+ * Ivium Technologies product IDs
+ */
+#define FTDI_PALMSENS_PID	0xf440
+#define FTDI_IVIUM_XSTAT_PID	0xf441
+
+/*
  * Linx Technologies product ids
  */
 #define LINX_SDMUSBQSS_PID	0xF448	/* Linx SDM-USB-QS-S */
@@ -590,6 +596,12 @@
 #define STK541_PID		0x2109 /* Zigbee Controller */
 
 /*
+ * Texas Instruments
+ */
+#define TI_VID			0x0451
+#define TI_CC3200_LAUNCHPAD_PID	0xC32A /* SimpleLink Wi-Fi CC3200 LaunchPad */
+
+/*
  * Blackfin gnICE JTAG
  * http://docs.blackfin.uclinux.org/doku.php?id=hw:jtag:gnice
  */
@@ -620,8 +632,9 @@
 /*
  * Infineon Technologies
  */
-#define INFINEON_VID		0x058b
-#define INFINEON_TRIBOARD_PID	0x0028 /* DAS JTAG TriBoard TC1798 V1.0 */
+#define INFINEON_VID		        0x058b
+#define INFINEON_TRIBOARD_TC1798_PID	0x0028 /* DAS JTAG TriBoard TC1798 V1.0 */
+#define INFINEON_TRIBOARD_TC2X7_PID	0x0043 /* DAS JTAG TriBoard TC2X7 V1.0 */
 
 /*
  * Acton Research Corp.
@@ -673,6 +686,12 @@
 #define INTREPID_NEOVI_PID	0x0701
 
 /*
+ * WICED USB UART
+ */
+#define WICED_VID		0x0A5C
+#define WICED_USB20706V2_PID	0x6422
+
+/*
  * Definitions for ID TECH (www.idt-net.com) devices
  */
 #define IDTECH_VID		0x0ACD	/* ID TECH Vendor ID */
@@ -872,6 +891,14 @@
 #define NOVITUS_BONO_E_PID		0x6010
 
 /*
+ * ICPDAS I-756*U devices
+ */
+#define ICPDAS_VID			0x1b5c
+#define ICPDAS_I7560U_PID		0x0103
+#define ICPDAS_I7561U_PID		0x0104
+#define ICPDAS_I7563U_PID		0x0105
+
+/*
  * RT Systems programming cables for various ham radios
  */
 #define RTSYSTEMS_VID		0x2100	/* Vendor ID */
diff --git a/kernel/drivers/usb/serial/garmin_gps.c b/kernel/drivers/usb/serial/garmin_gps.c
index db591d19d..37d0e8cc7 100644
--- a/kernel/drivers/usb/serial/garmin_gps.c
+++ b/kernel/drivers/usb/serial/garmin_gps.c
@@ -1044,6 +1044,7 @@ static int garmin_write_bulk(struct usb_serial_port *port,
 		   "%s - usb_submit_urb(write bulk) failed with status = %d\n",
 				__func__, status);
 		count = status;
+		kfree(buffer);
 	}
 
 	/* we are done with this urb, so let the host driver
diff --git a/kernel/drivers/usb/serial/io_edgeport.c b/kernel/drivers/usb/serial/io_edgeport.c
index c0866971d..b63a6c389 100644
--- a/kernel/drivers/usb/serial/io_edgeport.c
+++ b/kernel/drivers/usb/serial/io_edgeport.c
@@ -2761,6 +2761,11 @@ static int edge_startup(struct usb_serial *serial)
 					EDGE_COMPATIBILITY_MASK1,
 					EDGE_COMPATIBILITY_MASK2 };
 
+	if (serial->num_bulk_in < 1 || serial->num_interrupt_in < 1) {
+		dev_err(&serial->interface->dev, "missing endpoints\n");
+		return -ENODEV;
+	}
+
 	dev = serial->dev;
 
 	/* create our private serial structure */
@@ -2856,14 +2861,16 @@ static int edge_startup(struct usb_serial *serial)
 				/* not set up yet, so do it now */
 				edge_serial->interrupt_read_urb =
 						usb_alloc_urb(0, GFP_KERNEL);
-				if (!edge_serial->interrupt_read_urb)
-					return -ENOMEM;
+				if (!edge_serial->interrupt_read_urb) {
+					response = -ENOMEM;
+					break;
+				}
 
 				edge_serial->interrupt_in_buffer =
 					kmalloc(buffer_size, GFP_KERNEL);
 				if (!edge_serial->interrupt_in_buffer) {
-					usb_free_urb(edge_serial->interrupt_read_urb);
-					return -ENOMEM;
+					response = -ENOMEM;
+					break;
 				}
 				edge_serial->interrupt_in_endpoint =
 						endpoint->bEndpointAddress;
@@ -2891,14 +2898,16 @@ static int edge_startup(struct usb_serial *serial)
 				/* not set up yet, so do it now */
 				edge_serial->read_urb =
 						usb_alloc_urb(0, GFP_KERNEL);
-				if (!edge_serial->read_urb)
-					return -ENOMEM;
+				if (!edge_serial->read_urb) {
+					response = -ENOMEM;
+					break;
+				}
 
 				edge_serial->bulk_in_buffer =
 					kmalloc(buffer_size, GFP_KERNEL);
 				if (!edge_serial->bulk_in_buffer) {
-					usb_free_urb(edge_serial->read_urb);
-					return -ENOMEM;
+					response = -ENOMEM;
+					break;
 				}
 				edge_serial->bulk_in_endpoint =
 						endpoint->bEndpointAddress;
@@ -2924,9 +2933,22 @@ static int edge_startup(struct usb_serial *serial)
 			}
 		}
 
-		if (!interrupt_in_found || !bulk_in_found || !bulk_out_found) {
-			dev_err(ddev, "Error - the proper endpoints were not found!\n");
-			return -ENODEV;
+		if (response || !interrupt_in_found || !bulk_in_found ||
+							!bulk_out_found) {
+			if (!response) {
+				dev_err(ddev, "expected endpoints not found\n");
+				response = -ENODEV;
+			}
+
+			usb_free_urb(edge_serial->interrupt_read_urb);
+			kfree(edge_serial->interrupt_in_buffer);
+
+			usb_free_urb(edge_serial->read_urb);
+			kfree(edge_serial->bulk_in_buffer);
+
+			kfree(edge_serial);
+
+			return response;
 		}
 
 		/* start interrupt read for this edgeport this interrupt will
@@ -2949,16 +2971,9 @@ static void edge_disconnect(struct usb_serial *serial)
 {
 	struct edgeport_serial *edge_serial = usb_get_serial_data(serial);
 
-	/* stop reads and writes on all ports */
-	/* free up our endpoint stuff */
 	if (edge_serial->is_epic) {
 		usb_kill_urb(edge_serial->interrupt_read_urb);
-		usb_free_urb(edge_serial->interrupt_read_urb);
-		kfree(edge_serial->interrupt_in_buffer);
-
 		usb_kill_urb(edge_serial->read_urb);
-		usb_free_urb(edge_serial->read_urb);
-		kfree(edge_serial->bulk_in_buffer);
 	}
 }
 
@@ -2971,6 +2986,16 @@ static void edge_release(struct usb_serial *serial)
 {
 	struct edgeport_serial *edge_serial = usb_get_serial_data(serial);
 
+	if (edge_serial->is_epic) {
+		usb_kill_urb(edge_serial->interrupt_read_urb);
+		usb_free_urb(edge_serial->interrupt_read_urb);
+		kfree(edge_serial->interrupt_in_buffer);
+
+		usb_kill_urb(edge_serial->read_urb);
+		usb_free_urb(edge_serial->read_urb);
+		kfree(edge_serial->bulk_in_buffer);
+	}
+
 	kfree(edge_serial);
 }
 
diff --git a/kernel/drivers/usb/serial/io_ti.c b/kernel/drivers/usb/serial/io_ti.c
index fce82fd79..c02808a30 100644
--- a/kernel/drivers/usb/serial/io_ti.c
+++ b/kernel/drivers/usb/serial/io_ti.c
@@ -1499,8 +1499,7 @@ static int do_boot_mode(struct edgeport_serial *serial,
 
 		dev_dbg(dev, "%s - Download successful -- Device rebooting...\n", __func__);
 
-		/* return an error on purpose */
-		return -ENODEV;
+		return 1;
 	}
 
 stayinbootmode:
@@ -1508,7 +1507,7 @@ stayinbootmode:
 	dev_dbg(dev, "%s - STAYING IN BOOT MODE\n", __func__);
 	serial->product_info.TiMode = TI_MODE_BOOT;
 
-	return 0;
+	return 1;
 }
 
 static int ti_do_config(struct edgeport_port *port, int feature, int on)
@@ -2549,6 +2548,13 @@ static int edge_startup(struct usb_serial *serial)
 	int status;
 	u16 product_id;
 
+	/* Make sure we have the required endpoints when in download mode. */
+	if (serial->interface->cur_altsetting->desc.bNumEndpoints > 1) {
+		if (serial->num_bulk_in < serial->num_ports ||
+				serial->num_bulk_out < serial->num_ports)
+			return -ENODEV;
+	}
+
 	/* create our private serial structure */
 	edge_serial = kzalloc(sizeof(struct edgeport_serial), GFP_KERNEL);
 	if (!edge_serial)
@@ -2556,14 +2562,18 @@ static int edge_startup(struct usb_serial *serial)
 
 	mutex_init(&edge_serial->es_lock);
 	edge_serial->serial = serial;
+	INIT_DELAYED_WORK(&edge_serial->heartbeat_work, edge_heartbeat_work);
 	usb_set_serial_data(serial, edge_serial);
 
 	status = download_fw(edge_serial);
-	if (status) {
+	if (status < 0) {
 		kfree(edge_serial);
 		return status;
 	}
 
+	if (status > 0)
+		return 1;	/* bind but do not register any ports */
+
 	product_id = le16_to_cpu(
 			edge_serial->serial->dev->descriptor.idProduct);
 
@@ -2575,7 +2585,6 @@ static int edge_startup(struct usb_serial *serial)
 		}
 	}
 
-	INIT_DELAYED_WORK(&edge_serial->heartbeat_work, edge_heartbeat_work);
 	edge_heartbeat_schedule(edge_serial);
 
 	return 0;
@@ -2583,6 +2592,9 @@ static int edge_startup(struct usb_serial *serial)
 
 static void edge_disconnect(struct usb_serial *serial)
 {
+	struct edgeport_serial *edge_serial = usb_get_serial_data(serial);
+
+	cancel_delayed_work_sync(&edge_serial->heartbeat_work);
 }
 
 static void edge_release(struct usb_serial *serial)
diff --git a/kernel/drivers/usb/serial/iuu_phoenix.c b/kernel/drivers/usb/serial/iuu_phoenix.c
index 5ad4a0fb4..7ed7d33d6 100644
--- a/kernel/drivers/usb/serial/iuu_phoenix.c
+++ b/kernel/drivers/usb/serial/iuu_phoenix.c
@@ -68,6 +68,16 @@ struct iuu_private {
 	u32 clk;
 };
 
+static int iuu_attach(struct usb_serial *serial)
+{
+	unsigned char num_ports = serial->num_ports;
+
+	if (serial->num_bulk_in < num_ports || serial->num_bulk_out < num_ports)
+		return -ENODEV;
+
+	return 0;
+}
+
 static int iuu_port_probe(struct usb_serial_port *port)
 {
 	struct iuu_private *priv;
@@ -1196,6 +1206,7 @@ static struct usb_serial_driver iuu_device = {
 	.tiocmset = iuu_tiocmset,
 	.set_termios = iuu_set_termios,
 	.init_termios = iuu_init_termios,
+	.attach = iuu_attach,
 	.port_probe = iuu_port_probe,
 	.port_remove = iuu_port_remove,
 };
diff --git a/kernel/drivers/usb/serial/keyspan.c b/kernel/drivers/usb/serial/keyspan.c
index e07b15ed5..7faa901ee 100644
--- a/kernel/drivers/usb/serial/keyspan.c
+++ b/kernel/drivers/usb/serial/keyspan.c
@@ -2376,6 +2376,10 @@ static void keyspan_release(struct usb_serial *serial)
 
 	s_priv = usb_get_serial_data(serial);
 
+	/* Make sure to unlink the URBs submitted in attach. */
+	usb_kill_urb(s_priv->instat_urb);
+	usb_kill_urb(s_priv->indat_urb);
+
 	usb_free_urb(s_priv->instat_urb);
 	usb_free_urb(s_priv->indat_urb);
 	usb_free_urb(s_priv->glocont_urb);
diff --git a/kernel/drivers/usb/serial/keyspan_pda.c b/kernel/drivers/usb/serial/keyspan_pda.c
index 4f7e072e4..930be98d5 100644
--- a/kernel/drivers/usb/serial/keyspan_pda.c
+++ b/kernel/drivers/usb/serial/keyspan_pda.c
@@ -699,6 +699,19 @@ MODULE_FIRMWARE("keyspan_pda/keyspan_pda.fw");
 MODULE_FIRMWARE("keyspan_pda/xircom_pgs.fw");
 #endif
 
+static int keyspan_pda_attach(struct usb_serial *serial)
+{
+	unsigned char num_ports = serial->num_ports;
+
+	if (serial->num_bulk_out < num_ports ||
+			serial->num_interrupt_in < num_ports) {
+		dev_err(&serial->interface->dev, "missing endpoints\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
 static int keyspan_pda_port_probe(struct usb_serial_port *port)
 {
 
@@ -776,6 +789,7 @@ static struct usb_serial_driver keyspan_pda_device = {
 	.break_ctl =		keyspan_pda_break_ctl,
 	.tiocmget =		keyspan_pda_tiocmget,
 	.tiocmset =		keyspan_pda_tiocmset,
+	.attach =		keyspan_pda_attach,
 	.port_probe =		keyspan_pda_port_probe,
 	.port_remove =		keyspan_pda_port_remove,
 };
diff --git a/kernel/drivers/usb/serial/kl5kusb105.c b/kernel/drivers/usb/serial/kl5kusb105.c
index e020ad28a..83c823d32 100644
--- a/kernel/drivers/usb/serial/kl5kusb105.c
+++ b/kernel/drivers/usb/serial/kl5kusb105.c
@@ -192,10 +192,11 @@ static int klsi_105_get_line_state(struct usb_serial_port *port,
 			     status_buf, KLSI_STATUSBUF_LEN,
 			     10000
 			     );
-	if (rc < 0)
-		dev_err(&port->dev, "Reading line status failed (error = %d)\n",
-			rc);
-	else {
+	if (rc != KLSI_STATUSBUF_LEN) {
+		dev_err(&port->dev, "reading line status failed: %d\n", rc);
+		if (rc >= 0)
+			rc = -EIO;
+	} else {
 		status = get_unaligned_le16(status_buf);
 
 		dev_info(&port->serial->dev->dev, "read status %x %x\n",
@@ -296,7 +297,7 @@ static int  klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port)
 	rc = usb_serial_generic_open(tty, port);
 	if (rc) {
 		retval = rc;
-		goto exit;
+		goto err_free_cfg;
 	}
 
 	rc = usb_control_msg(port->serial->dev,
@@ -311,21 +312,38 @@ static int  klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port)
 	if (rc < 0) {
 		dev_err(&port->dev, "Enabling read failed (error = %d)\n", rc);
 		retval = rc;
+		goto err_generic_close;
 	} else
 		dev_dbg(&port->dev, "%s - enabled reading\n", __func__);
 
 	rc = klsi_105_get_line_state(port, &line_state);
-	if (rc >= 0) {
-		spin_lock_irqsave(&priv->lock, flags);
-		priv->line_state = line_state;
-		spin_unlock_irqrestore(&priv->lock, flags);
-		dev_dbg(&port->dev, "%s - read line state 0x%lx\n", __func__, line_state);
-		retval = 0;
-	} else
+	if (rc < 0) {
 		retval = rc;
+		goto err_disable_read;
+	}
+
+	spin_lock_irqsave(&priv->lock, flags);
+	priv->line_state = line_state;
+	spin_unlock_irqrestore(&priv->lock, flags);
+	dev_dbg(&port->dev, "%s - read line state 0x%lx\n", __func__,
+			line_state);
+
+	return 0;
 
-exit:
+err_disable_read:
+	usb_control_msg(port->serial->dev,
+			     usb_sndctrlpipe(port->serial->dev, 0),
+			     KL5KUSB105A_SIO_CONFIGURE,
+			     USB_TYPE_VENDOR | USB_DIR_OUT,
+			     KL5KUSB105A_SIO_CONFIGURE_READ_OFF,
+			     0, /* index */
+			     NULL, 0,
+			     KLSI_TIMEOUT);
+err_generic_close:
+	usb_serial_generic_close(port);
+err_free_cfg:
 	kfree(cfg);
+
 	return retval;
 }
 
diff --git a/kernel/drivers/usb/serial/kobil_sct.c b/kernel/drivers/usb/serial/kobil_sct.c
index 2363654ca..813035f51 100644
--- a/kernel/drivers/usb/serial/kobil_sct.c
+++ b/kernel/drivers/usb/serial/kobil_sct.c
@@ -51,6 +51,7 @@
 
 
 /* Function prototypes */
+static int kobil_attach(struct usb_serial *serial);
 static int kobil_port_probe(struct usb_serial_port *probe);
 static int kobil_port_remove(struct usb_serial_port *probe);
 static int  kobil_open(struct tty_struct *tty, struct usb_serial_port *port);
@@ -86,6 +87,7 @@ static struct usb_serial_driver kobil_device = {
 	.description =		"KOBIL USB smart card terminal",
 	.id_table =		id_table,
 	.num_ports =		1,
+	.attach =		kobil_attach,
 	.port_probe =		kobil_port_probe,
 	.port_remove =		kobil_port_remove,
 	.ioctl =		kobil_ioctl,
@@ -113,6 +115,16 @@ struct kobil_private {
 };
 
 
+static int kobil_attach(struct usb_serial *serial)
+{
+	if (serial->num_interrupt_out < serial->num_ports) {
+		dev_err(&serial->interface->dev, "missing interrupt-out endpoint\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
 static int kobil_port_probe(struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
diff --git a/kernel/drivers/usb/serial/mct_u232.c b/kernel/drivers/usb/serial/mct_u232.c
index fd707d6a1..89726f702 100644
--- a/kernel/drivers/usb/serial/mct_u232.c
+++ b/kernel/drivers/usb/serial/mct_u232.c
@@ -376,14 +376,21 @@ static void mct_u232_msr_to_state(struct usb_serial_port *port,
 
 static int mct_u232_port_probe(struct usb_serial_port *port)
 {
+	struct usb_serial *serial = port->serial;
 	struct mct_u232_private *priv;
 
+	/* check first to simplify error handling */
+	if (!serial->port[1] || !serial->port[1]->interrupt_in_urb) {
+		dev_err(&port->dev, "expected endpoint missing\n");
+		return -ENODEV;
+	}
+
 	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
 
 	/* Use second interrupt-in endpoint for reading. */
-	priv->read_urb = port->serial->port[1]->interrupt_in_urb;
+	priv->read_urb = serial->port[1]->interrupt_in_urb;
 	priv->read_urb->context = port;
 
 	spin_lock_init(&priv->lock);
diff --git a/kernel/drivers/usb/serial/mos7720.c b/kernel/drivers/usb/serial/mos7720.c
index 78b4f64c6..e56cdb436 100644
--- a/kernel/drivers/usb/serial/mos7720.c
+++ b/kernel/drivers/usb/serial/mos7720.c
@@ -65,8 +65,6 @@ struct moschip_port {
 	struct urb		*write_urb_pool[NUM_URBS];
 };
 
-static struct usb_serial_driver moschip7720_2port_driver;
-
 #define USB_VENDOR_ID_MOSCHIP		0x9710
 #define MOSCHIP_DEVICE_ID_7720		0x7720
 #define MOSCHIP_DEVICE_ID_7715		0x7715
@@ -970,25 +968,6 @@ static void mos7720_bulk_out_data_callback(struct urb *urb)
 		tty_port_tty_wakeup(&mos7720_port->port->port);
 }
 
-/*
- * mos77xx_probe
- *	this function installs the appropriate read interrupt endpoint callback
- *	depending on whether the device is a 7720 or 7715, thus avoiding costly
- *	run-time checks in the high-frequency callback routine itself.
- */
-static int mos77xx_probe(struct usb_serial *serial,
-			 const struct usb_device_id *id)
-{
-	if (id->idProduct == MOSCHIP_DEVICE_ID_7715)
-		moschip7720_2port_driver.read_int_callback =
-			mos7715_interrupt_callback;
-	else
-		moschip7720_2port_driver.read_int_callback =
-			mos7720_interrupt_callback;
-
-	return 0;
-}
-
 static int mos77xx_calc_num_ports(struct usb_serial *serial)
 {
 	u16 product = le16_to_cpu(serial->dev->descriptor.idProduct);
@@ -1252,7 +1231,7 @@ static int mos7720_write(struct tty_struct *tty, struct usb_serial_port *port,
 
 	if (urb->transfer_buffer == NULL) {
 		urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE,
-					       GFP_KERNEL);
+					       GFP_ATOMIC);
 		if (!urb->transfer_buffer)
 			goto exit;
 	}
@@ -1920,6 +1899,11 @@ static int mos7720_startup(struct usb_serial *serial)
 	u16 product;
 	int ret_val;
 
+	if (serial->num_bulk_in < 2 || serial->num_bulk_out < 2) {
+		dev_err(&serial->interface->dev, "missing bulk endpoints\n");
+		return -ENODEV;
+	}
+
 	product = le16_to_cpu(serial->dev->descriptor.idProduct);
 	dev = serial->dev;
 
@@ -1944,19 +1928,18 @@ static int mos7720_startup(struct usb_serial *serial)
 			tmp->interrupt_in_endpointAddress;
 		serial->port[1]->interrupt_in_urb = NULL;
 		serial->port[1]->interrupt_in_buffer = NULL;
+
+		if (serial->port[0]->interrupt_in_urb) {
+			struct urb *urb = serial->port[0]->interrupt_in_urb;
+
+			urb->complete = mos7715_interrupt_callback;
+		}
 	}
 
 	/* setting configuration feature to one */
 	usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
 			(__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5000);
 
-	/* start the interrupt urb */
-	ret_val = usb_submit_urb(serial->port[0]->interrupt_in_urb, GFP_KERNEL);
-	if (ret_val)
-		dev_err(&dev->dev,
-			"%s - Error %d submitting control urb\n",
-			__func__, ret_val);
-
 #ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT
 	if (product == MOSCHIP_DEVICE_ID_7715) {
 		ret_val = mos7715_parport_init(serial);
@@ -1964,6 +1947,13 @@ static int mos7720_startup(struct usb_serial *serial)
 			return ret_val;
 	}
 #endif
+	/* start the interrupt urb */
+	ret_val = usb_submit_urb(serial->port[0]->interrupt_in_urb, GFP_KERNEL);
+	if (ret_val) {
+		dev_err(&dev->dev, "failed to submit interrupt urb: %d\n",
+			ret_val);
+	}
+
 	/* LSR For Port 1 */
 	read_mos_reg(serial, 0, MOS7720_LSR, &data);
 	dev_dbg(&dev->dev, "LSR:%x\n", data);
@@ -1973,6 +1963,8 @@ static int mos7720_startup(struct usb_serial *serial)
 
 static void mos7720_release(struct usb_serial *serial)
 {
+	usb_kill_urb(serial->port[0]->interrupt_in_urb);
+
 #ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT
 	/* close the parallel port */
 
@@ -2007,6 +1999,7 @@ static void mos7720_release(struct usb_serial *serial)
 				    urblist_entry)
 			usb_unlink_urb(urbtrack->urb);
 		spin_unlock_irqrestore(&mos_parport->listlock, flags);
+		parport_del_port(mos_parport->pp);
 
 		kref_put(&mos_parport->ref_count, destroy_mos_parport);
 	}
@@ -2055,7 +2048,6 @@ static struct usb_serial_driver moschip7720_2port_driver = {
 	.close			= mos7720_close,
 	.throttle		= mos7720_throttle,
 	.unthrottle		= mos7720_unthrottle,
-	.probe			= mos77xx_probe,
 	.attach			= mos7720_startup,
 	.release		= mos7720_release,
 	.port_probe		= mos7720_port_probe,
@@ -2069,7 +2061,7 @@ static struct usb_serial_driver moschip7720_2port_driver = {
 	.chars_in_buffer	= mos7720_chars_in_buffer,
 	.break_ctl		= mos7720_break,
 	.read_bulk_callback	= mos7720_bulk_in_callback,
-	.read_int_callback	= NULL  /* dynamically assigned in probe() */
+	.read_int_callback	= mos7720_interrupt_callback,
 };
 
 static struct usb_serial_driver * const serial_drivers[] = {
diff --git a/kernel/drivers/usb/serial/mos7840.c b/kernel/drivers/usb/serial/mos7840.c
index 8ac9b55f0..97ea52b5c 100644
--- a/kernel/drivers/usb/serial/mos7840.c
+++ b/kernel/drivers/usb/serial/mos7840.c
@@ -1340,8 +1340,8 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port,
 	}
 
 	if (urb->transfer_buffer == NULL) {
-		urb->transfer_buffer =
-		    kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL);
+		urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE,
+					       GFP_ATOMIC);
 		if (!urb->transfer_buffer)
 			goto exit;
 	}
@@ -2116,6 +2116,17 @@ static int mos7840_calc_num_ports(struct usb_serial *serial)
 	return mos7840_num_ports;
 }
 
+static int mos7840_attach(struct usb_serial *serial)
+{
+	if (serial->num_bulk_in < serial->num_ports ||
+			serial->num_bulk_out < serial->num_ports) {
+		dev_err(&serial->interface->dev, "missing endpoints\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
 static int mos7840_port_probe(struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
@@ -2391,6 +2402,7 @@ static struct usb_serial_driver moschip7840_4port_device = {
 	.tiocmset = mos7840_tiocmset,
 	.tiocmiwait = usb_serial_generic_tiocmiwait,
 	.get_icount = usb_serial_generic_get_icount,
+	.attach = mos7840_attach,
 	.port_probe = mos7840_port_probe,
 	.port_remove = mos7840_port_remove,
 	.read_bulk_callback = mos7840_bulk_in_callback,
diff --git a/kernel/drivers/usb/serial/mxuport.c b/kernel/drivers/usb/serial/mxuport.c
index 31a8b47f1..c6596cbcc 100644
--- a/kernel/drivers/usb/serial/mxuport.c
+++ b/kernel/drivers/usb/serial/mxuport.c
@@ -1259,6 +1259,15 @@ static int mxuport_attach(struct usb_serial *serial)
 	return 0;
 }
 
+static void mxuport_release(struct usb_serial *serial)
+{
+	struct usb_serial_port *port0 = serial->port[0];
+	struct usb_serial_port *port1 = serial->port[1];
+
+	usb_serial_generic_close(port1);
+	usb_serial_generic_close(port0);
+}
+
 static int mxuport_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct mxuport_port *mxport = usb_get_serial_port_data(port);
@@ -1361,6 +1370,7 @@ static struct usb_serial_driver mxuport_device = {
 	.probe			= mxuport_probe,
 	.port_probe		= mxuport_port_probe,
 	.attach			= mxuport_attach,
+	.release		= mxuport_release,
 	.calc_num_ports		= mxuport_calc_num_ports,
 	.open			= mxuport_open,
 	.close			= mxuport_close,
diff --git a/kernel/drivers/usb/serial/omninet.c b/kernel/drivers/usb/serial/omninet.c
index f6c6900bc..a180b17d2 100644
--- a/kernel/drivers/usb/serial/omninet.c
+++ b/kernel/drivers/usb/serial/omninet.c
@@ -38,6 +38,7 @@ static int  omninet_write(struct tty_struct *tty, struct usb_serial_port *port,
 				const unsigned char *buf, int count);
 static int  omninet_write_room(struct tty_struct *tty);
 static void omninet_disconnect(struct usb_serial *serial);
+static int omninet_attach(struct usb_serial *serial);
 static int omninet_port_probe(struct usb_serial_port *port);
 static int omninet_port_remove(struct usb_serial_port *port);
 
@@ -56,6 +57,7 @@ static struct usb_serial_driver zyxel_omninet_device = {
 	.description =		"ZyXEL - omni.net lcd plus usb",
 	.id_table =		id_table,
 	.num_ports =		1,
+	.attach =		omninet_attach,
 	.port_probe =		omninet_port_probe,
 	.port_remove =		omninet_port_remove,
 	.open =			omninet_open,
@@ -104,6 +106,17 @@ struct omninet_data {
 	__u8	od_outseq;	/* Sequence number for bulk_out URBs */
 };
 
+static int omninet_attach(struct usb_serial *serial)
+{
+	/* The second bulk-out endpoint is used for writing. */
+	if (serial->num_bulk_out < 2) {
+		dev_err(&serial->interface->dev, "missing endpoints\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
 static int omninet_port_probe(struct usb_serial_port *port)
 {
 	struct omninet_data *od;
diff --git a/kernel/drivers/usb/serial/option.c b/kernel/drivers/usb/serial/option.c
index 348e19834..42cc72e54 100644
--- a/kernel/drivers/usb/serial/option.c
+++ b/kernel/drivers/usb/serial/option.c
@@ -268,11 +268,20 @@ static void option_instat_callback(struct urb *urb);
 #define TELIT_PRODUCT_CC864_SINGLE		0x1006
 #define TELIT_PRODUCT_DE910_DUAL		0x1010
 #define TELIT_PRODUCT_UE910_V2			0x1012
+#define TELIT_PRODUCT_LE922_USBCFG1		0x1040
+#define TELIT_PRODUCT_LE922_USBCFG2		0x1041
 #define TELIT_PRODUCT_LE922_USBCFG0		0x1042
 #define TELIT_PRODUCT_LE922_USBCFG3		0x1043
 #define TELIT_PRODUCT_LE922_USBCFG5		0x1045
 #define TELIT_PRODUCT_LE920			0x1200
 #define TELIT_PRODUCT_LE910			0x1201
+#define TELIT_PRODUCT_LE910_USBCFG4		0x1206
+#define TELIT_PRODUCT_LE920A4_1207		0x1207
+#define TELIT_PRODUCT_LE920A4_1208		0x1208
+#define TELIT_PRODUCT_LE920A4_1211		0x1211
+#define TELIT_PRODUCT_LE920A4_1212		0x1212
+#define TELIT_PRODUCT_LE920A4_1213		0x1213
+#define TELIT_PRODUCT_LE920A4_1214		0x1214
 
 /* ZTE PRODUCTS */
 #define ZTE_VENDOR_ID				0x19d2
@@ -375,18 +384,22 @@ static void option_instat_callback(struct urb *urb);
 #define HAIER_PRODUCT_CE81B			0x10f8
 #define HAIER_PRODUCT_CE100			0x2009
 
-/* Cinterion (formerly Siemens) products */
-#define SIEMENS_VENDOR_ID				0x0681
-#define CINTERION_VENDOR_ID				0x1e2d
+/* Gemalto's Cinterion products (formerly Siemens) */
+#define SIEMENS_VENDOR_ID			0x0681
+#define CINTERION_VENDOR_ID			0x1e2d
+#define CINTERION_PRODUCT_HC25_MDMNET		0x0040
 #define CINTERION_PRODUCT_HC25_MDM		0x0047
-#define CINTERION_PRODUCT_HC25_MDMNET	0x0040
+#define CINTERION_PRODUCT_HC28_MDMNET		0x004A /* same for HC28J */
 #define CINTERION_PRODUCT_HC28_MDM		0x004C
-#define CINTERION_PRODUCT_HC28_MDMNET	0x004A /* same for HC28J */
 #define CINTERION_PRODUCT_EU3_E			0x0051
 #define CINTERION_PRODUCT_EU3_P			0x0052
 #define CINTERION_PRODUCT_PH8			0x0053
 #define CINTERION_PRODUCT_AHXX			0x0055
 #define CINTERION_PRODUCT_PLXX			0x0060
+#define CINTERION_PRODUCT_PH8_2RMNET		0x0082
+#define CINTERION_PRODUCT_PH8_AUDIO		0x0083
+#define CINTERION_PRODUCT_AHXX_2RMNET		0x0084
+#define CINTERION_PRODUCT_AHXX_AUDIO		0x0085
 
 /* Olivetti products */
 #define OLIVETTI_VENDOR_ID			0x0b3c
@@ -514,6 +527,12 @@ static void option_instat_callback(struct urb *urb);
 #define VIATELECOM_VENDOR_ID			0x15eb
 #define VIATELECOM_PRODUCT_CDS7			0x0001
 
+/* WeTelecom products */
+#define WETELECOM_VENDOR_ID			0x22de
+#define WETELECOM_PRODUCT_WMD200		0x6801
+#define WETELECOM_PRODUCT_6802			0x6802
+#define WETELECOM_PRODUCT_WMD300		0x6803
+
 struct option_blacklist_info {
 	/* bitmask of interface numbers blacklisted for send_setup */
 	const unsigned long sendsetup;
@@ -623,6 +642,11 @@ static const struct option_blacklist_info telit_le920_blacklist = {
 	.reserved = BIT(1) | BIT(5),
 };
 
+static const struct option_blacklist_info telit_le920a4_blacklist_1 = {
+	.sendsetup = BIT(0),
+	.reserved = BIT(1),
+};
+
 static const struct option_blacklist_info telit_le922_blacklist_usbcfg0 = {
 	.sendsetup = BIT(2),
 	.reserved = BIT(0) | BIT(1) | BIT(3),
@@ -633,6 +657,10 @@ static const struct option_blacklist_info telit_le922_blacklist_usbcfg3 = {
 	.reserved = BIT(1) | BIT(2) | BIT(3),
 };
 
+static const struct option_blacklist_info cinterion_rmnet2_blacklist = {
+	.reserved = BIT(4) | BIT(5),
+};
+
 static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
@@ -1184,14 +1212,30 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UE910_V2) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG0),
 		.driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg0 },
+	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG1),
+		.driver_info = (kernel_ulong_t)&telit_le910_blacklist },
+	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG2),
+		.driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg3 },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG3),
 		.driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg3 },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG5, 0xff),
 		.driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg0 },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910),
 		.driver_info = (kernel_ulong_t)&telit_le910_blacklist },
+	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910_USBCFG4),
+		.driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg3 },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920),
 		.driver_info = (kernel_ulong_t)&telit_le920_blacklist },
+	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1207) },
+	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1208),
+		.driver_info = (kernel_ulong_t)&telit_le920a4_blacklist_1 },
+	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1211),
+		.driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg3 },
+	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1212),
+		.driver_info = (kernel_ulong_t)&telit_le920a4_blacklist_1 },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1213, 0xff) },
+	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1214),
+		.driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg3 },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0002, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t)&net_intf1_blacklist },
@@ -1602,7 +1646,79 @@ static const struct usb_device_id option_ids[] = {
 		.driver_info = (kernel_ulong_t)&net_intf3_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0178, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t)&net_intf3_blacklist },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffe9, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff42, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff43, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff44, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff45, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff46, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff47, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff48, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff49, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff4a, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff4b, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff4c, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff4d, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff4e, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff4f, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff50, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff51, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff52, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff53, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff54, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff55, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff56, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff57, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff58, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff59, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff5a, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff5b, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff5c, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff5d, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff5e, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff5f, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff60, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff61, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff62, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff63, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff64, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff65, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff66, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff67, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff68, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff69, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff6a, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff6b, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff6c, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff6d, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff6e, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff6f, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff70, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff71, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff72, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff73, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff74, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff75, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff76, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff77, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff78, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff79, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff7a, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff7b, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff7c, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff7d, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff7e, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff7f, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff80, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff81, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff82, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff83, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff84, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff85, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff86, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff87, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff88, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff89, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff8a, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff8b, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff8c, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff8d, 0xff, 0xff, 0xff) },
@@ -1613,6 +1729,61 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff92, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff93, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff94, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff9f, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffa0, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffa1, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffa2, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffa3, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffa4, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffa5, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffa6, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffa7, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffa8, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffa9, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffaa, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffab, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffac, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffae, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffaf, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffb0, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffb1, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffb2, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffb3, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffb4, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffb5, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffb6, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffb7, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffb8, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffb9, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffba, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffbb, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffbc, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffbd, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffbe, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffbf, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffc0, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffc1, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffc2, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffc3, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffc4, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffc5, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffc6, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffc7, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffc8, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffc9, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffca, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffcb, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffcc, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffcd, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffce, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffcf, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffd0, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffd1, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffd2, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffd3, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffd4, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffd5, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffe9, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffec, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffee, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xfff6, 0xff, 0xff, 0xff) },
@@ -1712,7 +1883,13 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX, 0xff) },
 	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PLXX),
 		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
-	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) }, 
+	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8_2RMNET, 0xff),
+		.driver_info = (kernel_ulong_t)&cinterion_rmnet2_blacklist },
+	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8_AUDIO, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX_2RMNET, 0xff) },
+	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX_AUDIO, 0xff) },
+	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) },
 	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDMNET) },
 	{ USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC25_MDM) },
 	{ USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC25_MDMNET) },
@@ -1818,11 +1995,19 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d02, 0xff, 0x00, 0x00) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d03, 0xff, 0x02, 0x01) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d03, 0xff, 0x00, 0x00) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d04, 0xff) },			/* D-Link DWM-158 */
+	{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7e19, 0xff),			/* D-Link DWM-221 B1 */
+	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e01, 0xff, 0xff, 0xff) }, /* D-Link DWM-152/C1 */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e02, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/C1 */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x7e11, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/A3 */
 	{ USB_DEVICE_INTERFACE_CLASS(0x2020, 0x4000, 0xff) },                /* OLICARD300 - MT6225 */
 	{ USB_DEVICE(INOVIA_VENDOR_ID, INOVIA_SEW858) },
 	{ USB_DEVICE(VIATELECOM_VENDOR_ID, VIATELECOM_PRODUCT_CDS7) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(WETELECOM_VENDOR_ID, WETELECOM_PRODUCT_WMD200, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(WETELECOM_VENDOR_ID, WETELECOM_PRODUCT_6802, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(WETELECOM_VENDOR_ID, WETELECOM_PRODUCT_WMD300, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0x421d, 0xff, 0xff, 0xff) }, /* HP lt2523 (Novatel E371) */
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);
diff --git a/kernel/drivers/usb/serial/oti6858.c b/kernel/drivers/usb/serial/oti6858.c
index a4b88bc03..b8bf52bf7 100644
--- a/kernel/drivers/usb/serial/oti6858.c
+++ b/kernel/drivers/usb/serial/oti6858.c
@@ -134,6 +134,7 @@ static int oti6858_chars_in_buffer(struct tty_struct *tty);
 static int oti6858_tiocmget(struct tty_struct *tty);
 static int oti6858_tiocmset(struct tty_struct *tty,
 				unsigned int set, unsigned int clear);
+static int oti6858_attach(struct usb_serial *serial);
 static int oti6858_port_probe(struct usb_serial_port *port);
 static int oti6858_port_remove(struct usb_serial_port *port);
 
@@ -158,6 +159,7 @@ static struct usb_serial_driver oti6858_device = {
 	.write_bulk_callback =	oti6858_write_bulk_callback,
 	.write_room =		oti6858_write_room,
 	.chars_in_buffer =	oti6858_chars_in_buffer,
+	.attach =		oti6858_attach,
 	.port_probe =		oti6858_port_probe,
 	.port_remove =		oti6858_port_remove,
 };
@@ -324,6 +326,20 @@ static void send_data(struct work_struct *work)
 	usb_serial_port_softint(port);
 }
 
+static int oti6858_attach(struct usb_serial *serial)
+{
+	unsigned char num_ports = serial->num_ports;
+
+	if (serial->num_bulk_in < num_ports ||
+			serial->num_bulk_out < num_ports ||
+			serial->num_interrupt_in < num_ports) {
+		dev_err(&serial->interface->dev, "missing endpoints\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
 static int oti6858_port_probe(struct usb_serial_port *port)
 {
 	struct oti6858_private *priv;
diff --git a/kernel/drivers/usb/serial/pl2303.c b/kernel/drivers/usb/serial/pl2303.c
index ae682e4ee..1db4b61bd 100644
--- a/kernel/drivers/usb/serial/pl2303.c
+++ b/kernel/drivers/usb/serial/pl2303.c
@@ -49,6 +49,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) },
 	{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) },
 	{ USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) },
+	{ USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID2) },
 	{ USB_DEVICE(ATEN_VENDOR_ID2, ATEN_PRODUCT_ID) },
 	{ USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID) },
 	{ USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID_UCSGT) },
@@ -220,9 +221,17 @@ static int pl2303_probe(struct usb_serial *serial,
 static int pl2303_startup(struct usb_serial *serial)
 {
 	struct pl2303_serial_private *spriv;
+	unsigned char num_ports = serial->num_ports;
 	enum pl2303_type type = TYPE_01;
 	unsigned char *buf;
 
+	if (serial->num_bulk_in < num_ports ||
+			serial->num_bulk_out < num_ports ||
+			serial->num_interrupt_in < num_ports) {
+		dev_err(&serial->interface->dev, "missing endpoints\n");
+		return -ENODEV;
+	}
+
 	spriv = kzalloc(sizeof(*spriv), GFP_KERNEL);
 	if (!spriv)
 		return -ENOMEM;
diff --git a/kernel/drivers/usb/serial/pl2303.h b/kernel/drivers/usb/serial/pl2303.h
index e3b7af8ad..09d9be882 100644
--- a/kernel/drivers/usb/serial/pl2303.h
+++ b/kernel/drivers/usb/serial/pl2303.h
@@ -27,6 +27,7 @@
 #define ATEN_VENDOR_ID		0x0557
 #define ATEN_VENDOR_ID2		0x0547
 #define ATEN_PRODUCT_ID		0x2008
+#define ATEN_PRODUCT_ID2	0x2118
 
 #define IODATA_VENDOR_ID	0x04bb
 #define IODATA_PRODUCT_ID	0x0a03
diff --git a/kernel/drivers/usb/serial/qcserial.c b/kernel/drivers/usb/serial/qcserial.c
index 1bc6089b9..696458db7 100644
--- a/kernel/drivers/usb/serial/qcserial.c
+++ b/kernel/drivers/usb/serial/qcserial.c
@@ -124,6 +124,7 @@ static const struct usb_device_id id_table[] = {
 	{USB_DEVICE(0x1410, 0xa021)},	/* Novatel Gobi 3000 Composite */
 	{USB_DEVICE(0x413c, 0x8193)},	/* Dell Gobi 3000 QDL */
 	{USB_DEVICE(0x413c, 0x8194)},	/* Dell Gobi 3000 Composite */
+	{USB_DEVICE(0x413c, 0x81a6)},	/* Dell DW5570 QDL (MC8805) */
 	{USB_DEVICE(0x1199, 0x68a4)},	/* Sierra Wireless QDL */
 	{USB_DEVICE(0x1199, 0x68a5)},	/* Sierra Wireless Modem */
 	{USB_DEVICE(0x1199, 0x68a8)},	/* Sierra Wireless QDL */
diff --git a/kernel/drivers/usb/serial/quatech2.c b/kernel/drivers/usb/serial/quatech2.c
index 504f5bff7..a3ed07c58 100644
--- a/kernel/drivers/usb/serial/quatech2.c
+++ b/kernel/drivers/usb/serial/quatech2.c
@@ -141,6 +141,7 @@ static void qt2_release(struct usb_serial *serial)
 
 	serial_priv = usb_get_serial_data(serial);
 
+	usb_kill_urb(serial_priv->read_urb);
 	usb_free_urb(serial_priv->read_urb);
 	kfree(serial_priv->read_buffer);
 	kfree(serial_priv);
@@ -407,16 +408,12 @@ static void qt2_close(struct usb_serial_port *port)
 {
 	struct usb_serial *serial;
 	struct qt2_port_private *port_priv;
-	unsigned long flags;
 	int i;
 
 	serial = port->serial;
 	port_priv = usb_get_serial_port_data(port);
 
-	spin_lock_irqsave(&port_priv->urb_lock, flags);
 	usb_kill_urb(port_priv->write_urb);
-	port_priv->urb_in_use = false;
-	spin_unlock_irqrestore(&port_priv->urb_lock, flags);
 
 	/* flush the port transmit buffer */
 	i = usb_control_msg(serial->dev,
diff --git a/kernel/drivers/usb/serial/spcp8x5.c b/kernel/drivers/usb/serial/spcp8x5.c
index ef0dbf070..475e6c31b 100644
--- a/kernel/drivers/usb/serial/spcp8x5.c
+++ b/kernel/drivers/usb/serial/spcp8x5.c
@@ -154,6 +154,19 @@ static int spcp8x5_probe(struct usb_serial *serial,
 	return 0;
 }
 
+static int spcp8x5_attach(struct usb_serial *serial)
+{
+	unsigned char num_ports = serial->num_ports;
+
+	if (serial->num_bulk_in < num_ports ||
+			serial->num_bulk_out < num_ports) {
+		dev_err(&serial->interface->dev, "missing endpoints\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
 static int spcp8x5_port_probe(struct usb_serial_port *port)
 {
 	const struct usb_device_id *id = usb_get_serial_data(port->serial);
@@ -477,6 +490,7 @@ static struct usb_serial_driver spcp8x5_device = {
 	.tiocmget		= spcp8x5_tiocmget,
 	.tiocmset		= spcp8x5_tiocmset,
 	.probe			= spcp8x5_probe,
+	.attach			= spcp8x5_attach,
 	.port_probe		= spcp8x5_port_probe,
 	.port_remove		= spcp8x5_port_remove,
 };
diff --git a/kernel/drivers/usb/serial/ti_usb_3410_5052.c b/kernel/drivers/usb/serial/ti_usb_3410_5052.c
index 2694df2f4..535fcfafc 100644
--- a/kernel/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/kernel/drivers/usb/serial/ti_usb_3410_5052.c
@@ -339,6 +339,13 @@ static int ti_startup(struct usb_serial *serial)
 		goto free_tdev;
 	}
 
+	if (serial->num_bulk_in < serial->num_ports ||
+			serial->num_bulk_out < serial->num_ports) {
+		dev_err(&serial->interface->dev, "missing endpoints\n");
+		status = -ENODEV;
+		goto free_tdev;
+	}
+
 	return 0;
 
 free_tdev:
diff --git a/kernel/drivers/usb/serial/usb-serial-simple.c b/kernel/drivers/usb/serial/usb-serial-simple.c
index a204782ae..e98b6e57b 100644
--- a/kernel/drivers/usb/serial/usb-serial-simple.c
+++ b/kernel/drivers/usb/serial/usb-serial-simple.c
@@ -54,7 +54,8 @@ DEVICE(funsoft, FUNSOFT_IDS);
 /* Infineon Flashloader driver */
 #define FLASHLOADER_IDS()		\
 	{ USB_DEVICE_INTERFACE_CLASS(0x058b, 0x0041, USB_CLASS_CDC_DATA) }, \
-	{ USB_DEVICE(0x8087, 0x0716) }
+	{ USB_DEVICE(0x8087, 0x0716) }, \
+	{ USB_DEVICE(0x8087, 0x0801) }
 DEVICE(flashloader, FLASHLOADER_IDS);
 
 /* Google Serial USB SubClass */
diff --git a/kernel/drivers/usb/serial/usb-serial.c b/kernel/drivers/usb/serial/usb-serial.c
index 46f1f13b4..e7e29c797 100644
--- a/kernel/drivers/usb/serial/usb-serial.c
+++ b/kernel/drivers/usb/serial/usb-serial.c
@@ -1077,7 +1077,8 @@ static int usb_serial_probe(struct usb_interface *interface,
 
 	serial->disconnected = 0;
 
-	usb_serial_console_init(serial->port[0]->minor);
+	if (num_ports > 0)
+		usb_serial_console_init(serial->port[0]->minor);
 exit:
 	module_put(type->driver.owner);
 	return 0;
@@ -1432,7 +1433,7 @@ int usb_serial_register_drivers(struct usb_serial_driver *const serial_drivers[]
 
 	rc = usb_register(udriver);
 	if (rc)
-		return rc;
+		goto failed_usb_register;
 
 	for (sd = serial_drivers; *sd; ++sd) {
 		(*sd)->usb_driver = udriver;
@@ -1450,6 +1451,8 @@ int usb_serial_register_drivers(struct usb_serial_driver *const serial_drivers[]
 	while (sd-- > serial_drivers)
 		usb_serial_deregister(*sd);
 	usb_deregister(udriver);
+failed_usb_register:
+	kfree(udriver);
 	return rc;
 }
 EXPORT_SYMBOL_GPL(usb_serial_register_drivers);