Upgrade to 4.4.50-rt62

The current kernel is based on rt kernel v4.4.6-rt14. We will upgrade it
to 4.4.50-rt62.
The command to achieve it is:
a) Clone a git repo from
git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-stable-rt.git

b) Get the diff between this two changesets:
git diff 640eca2901f3435e616157b11379d3223a44b391
705619beeea1b0b48219a683fd1a901a86fdaf5e

where the two commits are:
[yjiang5@jnakajim-build linux-stable-rt]$ git show --oneline --name-only
640eca2901f3435e616157b11379d3223a44b391
640eca2901f3 v4.4.6-rt14
localversion-rt
[yjiang5@jnakajim-build linux-stable-rt]$ git show --oneline --name-only
705619beeea1b0b48219a683fd1a901a86fdaf5e
705619beeea1 Linux 4.4.50-rt62
localversion-rt

c) One patch has been backported thus revert the patch before applying.

 filterdiff -p1 -x scripts/package/Makefile
~/tmp/v4.4.6-rt14-4.4.50-rt62.diff  |patch -p1 --dry-run

Upstream status: backport

Change-Id: I244d57a32f6066e5a5b9915f9fbf99e7bbca6e01
Signed-off-by: Yunhong Jiang <yunhong.jiang@linux.intel.com>

1 files changed, 19 insertions, 7 deletions

diff --git a/kernel/drivers/usb/renesas_usbhs/fifo.c b/kernel/drivers/usb/renesas_usbhs/fifo.c
index c0f5c652d..36e5b5c53 100644
--- a/kernel/drivers/usb/renesas_usbhs/fifo.c
+++ b/kernel/drivers/usb/renesas_usbhs/fifo.c
@@ -190,7 +190,8 @@ static int usbhsf_pkt_handler(struct usbhs_pipe *pipe, int type)
 		goto __usbhs_pkt_handler_end;
 	}
 
-	ret = func(pkt, &is_done);
+	if (likely(func))
+		ret = func(pkt, &is_done);
 
 	if (is_done)
 		__usbhsf_pkt_del(pkt);
@@ -807,20 +808,27 @@ static void xfer_work(struct work_struct *work)
 {
 	struct usbhs_pkt *pkt = container_of(work, struct usbhs_pkt, work);
 	struct usbhs_pipe *pipe = pkt->pipe;
-	struct usbhs_fifo *fifo = usbhs_pipe_to_fifo(pipe);
+	struct usbhs_fifo *fifo;
 	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
 	struct dma_async_tx_descriptor *desc;
-	struct dma_chan *chan = usbhsf_dma_chan_get(fifo, pkt);
+	struct dma_chan *chan;
 	struct device *dev = usbhs_priv_to_dev(priv);
 	enum dma_transfer_direction dir;
+	unsigned long flags;
 
+	usbhs_lock(priv, flags);
+	fifo = usbhs_pipe_to_fifo(pipe);
+	if (!fifo)
+		goto xfer_work_end;
+
+	chan = usbhsf_dma_chan_get(fifo, pkt);
 	dir = usbhs_pipe_is_dir_in(pipe) ? DMA_DEV_TO_MEM : DMA_MEM_TO_DEV;
 
 	desc = dmaengine_prep_slave_single(chan, pkt->dma + pkt->actual,
 					pkt->trans, dir,
 					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	if (!desc)
-		return;
+		goto xfer_work_end;
 
 	desc->callback		= usbhsf_dma_complete;
 	desc->callback_param	= pipe;
@@ -828,7 +836,7 @@ static void xfer_work(struct work_struct *work)
 	pkt->cookie = dmaengine_submit(desc);
 	if (pkt->cookie < 0) {
 		dev_err(dev, "Failed to submit dma descriptor\n");
-		return;
+		goto xfer_work_end;
 	}
 
 	dev_dbg(dev, "  %s %d (%d/ %d)\n",
@@ -839,6 +847,9 @@ static void xfer_work(struct work_struct *work)
 	usbhs_pipe_set_trans_count_if_bulk(pipe, pkt->trans);
 	dma_async_issue_pending(chan);
 	usbhs_pipe_enable(pipe);
+
+xfer_work_end:
+	usbhs_unlock(priv, flags);
 }
 
 /*
@@ -858,7 +869,7 @@ static int usbhsf_dma_prepare_push(struct usbhs_pkt *pkt, int *is_done)
 
 	/* use PIO if packet is less than pio_dma_border or pipe is DCP */
 	if ((len < usbhs_get_dparam(priv, pio_dma_border)) ||
-	    usbhs_pipe_is_dcp(pipe))
+	    usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_ISOC))
 		goto usbhsf_pio_prepare_push;
 
 	/* check data length if this driver don't use USB-DMAC */
@@ -889,6 +900,7 @@ static int usbhsf_dma_prepare_push(struct usbhs_pkt *pkt, int *is_done)
 
 	pkt->trans = len;
 
+	usbhsf_tx_irq_ctrl(pipe, 0);
 	INIT_WORK(&pkt->work, xfer_work);
 	schedule_work(&pkt->work);
 
@@ -962,7 +974,7 @@ static int usbhsf_dma_prepare_pop_with_usb_dmac(struct usbhs_pkt *pkt,
 
 	/* use PIO if packet is less than pio_dma_border or pipe is DCP */
 	if ((pkt->length < usbhs_get_dparam(priv, pio_dma_border)) ||
-	    usbhs_pipe_is_dcp(pipe))
+	    usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_ISOC))
 		goto usbhsf_pio_prepare_pop;
 
 	fifo = usbhsf_get_dma_fifo(priv, pkt);