diff options
author | 2016-04-11 10:41:07 +0300 | |
---|---|---|
committer | 2016-04-13 08:17:18 +0300 | |
commit | e09b41010ba33a20a87472ee821fa407a5b8da36 (patch) | |
tree | d10dc367189862e7ca5c592f033dc3726e1df4e3 /kernel/drivers/usb/phy/phy-qcom-8x16-usb.c | |
parent | f93b97fd65072de626c074dbe099a1fff05ce060 (diff) |
These changes are the raw update to linux-4.4.6-rt14. Kernel sources
are taken from kernel.org, and rt patch from the rt wiki download page.
During the rebasing, the following patch collided:
Force tick interrupt and get rid of softirq magic(I70131fb85).
Collisions have been removed because its logic was found on the
source already.
Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>
Diffstat (limited to 'kernel/drivers/usb/phy/phy-qcom-8x16-usb.c')
-rw-r--r-- | kernel/drivers/usb/phy/phy-qcom-8x16-usb.c | 437 |
1 files changed, 437 insertions, 0 deletions
diff --git a/kernel/drivers/usb/phy/phy-qcom-8x16-usb.c b/kernel/drivers/usb/phy/phy-qcom-8x16-usb.c new file mode 100644 index 000000000..579587d97 --- /dev/null +++ b/kernel/drivers/usb/phy/phy-qcom-8x16-usb.c @@ -0,0 +1,437 @@ +/* + * Copyright (c) 2015, Linaro Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/extcon.h> +#include <linux/gpio/consumer.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/reboot.h> +#include <linux/regulator/consumer.h> +#include <linux/reset.h> +#include <linux/slab.h> +#include <linux/usb.h> +#include <linux/usb/ulpi.h> + +#define HSPHY_AHBBURST 0x0090 +#define HSPHY_AHBMODE 0x0098 +#define HSPHY_GENCONFIG 0x009c +#define HSPHY_GENCONFIG_2 0x00a0 + +#define HSPHY_USBCMD 0x0140 +#define HSPHY_ULPI_VIEWPORT 0x0170 +#define HSPHY_CTRL 0x0240 + +#define HSPHY_TXFIFO_IDLE_FORCE_DIS BIT(4) +#define HSPHY_SESS_VLD_CTRL_EN BIT(7) +#define HSPHY_POR_ASSERT BIT(0) +#define HSPHY_RETEN BIT(1) + +#define HSPHY_SESS_VLD_CTRL BIT(25) + +#define ULPI_PWR_CLK_MNG_REG 0x88 +#define ULPI_PWR_OTG_COMP_DISABLE BIT(0) + +#define ULPI_MISC_A 0x96 +#define ULPI_MISC_A_VBUSVLDEXTSEL BIT(1) +#define ULPI_MISC_A_VBUSVLDEXT BIT(0) + +#define HSPHY_3P3_MIN 3050000 /* uV */ +#define HSPHY_3P3_MAX 3300000 /* uV */ + +#define HSPHY_1P8_MIN 1800000 /* uV */ +#define HSPHY_1P8_MAX 1800000 /* uV */ + +#define HSPHY_VDD_MIN 5 +#define HSPHY_VDD_MAX 7 + +struct phy_8x16 { + struct usb_phy phy; + void __iomem *regs; + struct clk *core_clk; + struct clk *iface_clk; + struct regulator *v3p3; + struct regulator *v1p8; + struct regulator *vdd; + + struct reset_control *phy_reset; + + struct extcon_dev *vbus_edev; + struct notifier_block vbus_notify; + + struct gpio_desc *switch_gpio; + struct notifier_block reboot_notify; +}; + +static int phy_8x16_regulators_enable(struct phy_8x16 *qphy) +{ + int ret; + + ret = regulator_set_voltage(qphy->vdd, HSPHY_VDD_MIN, HSPHY_VDD_MAX); + if (ret) + return ret; + + ret = regulator_enable(qphy->vdd); + if (ret) + return ret; + + ret = regulator_set_voltage(qphy->v3p3, HSPHY_3P3_MIN, HSPHY_3P3_MAX); + if (ret) + goto off_vdd; + + ret = regulator_enable(qphy->v3p3); + if (ret) + goto off_vdd; + + ret = regulator_set_voltage(qphy->v1p8, HSPHY_1P8_MIN, HSPHY_1P8_MAX); + if (ret) + goto off_3p3; + + ret = regulator_enable(qphy->v1p8); + if (ret) + goto off_3p3; + + return 0; + +off_3p3: + regulator_disable(qphy->v3p3); +off_vdd: + regulator_disable(qphy->vdd); + + return ret; +} + +static void phy_8x16_regulators_disable(struct phy_8x16 *qphy) +{ + regulator_disable(qphy->v1p8); + regulator_disable(qphy->v3p3); + regulator_disable(qphy->vdd); +} + +static int phy_8x16_notify_connect(struct usb_phy *phy, + enum usb_device_speed speed) +{ + struct phy_8x16 *qphy = container_of(phy, struct phy_8x16, phy); + u32 val; + + val = ULPI_MISC_A_VBUSVLDEXTSEL | ULPI_MISC_A_VBUSVLDEXT; + usb_phy_io_write(&qphy->phy, val, ULPI_SET(ULPI_MISC_A)); + + val = readl(qphy->regs + HSPHY_USBCMD); + val |= HSPHY_SESS_VLD_CTRL; + writel(val, qphy->regs + HSPHY_USBCMD); + + return 0; +} + +static int phy_8x16_notify_disconnect(struct usb_phy *phy, + enum usb_device_speed speed) +{ + struct phy_8x16 *qphy = container_of(phy, struct phy_8x16, phy); + u32 val; + + val = ULPI_MISC_A_VBUSVLDEXT | ULPI_MISC_A_VBUSVLDEXTSEL; + usb_phy_io_write(&qphy->phy, val, ULPI_CLR(ULPI_MISC_A)); + + val = readl(qphy->regs + HSPHY_USBCMD); + val &= ~HSPHY_SESS_VLD_CTRL; + writel(val, qphy->regs + HSPHY_USBCMD); + + return 0; +} + +static int phy_8x16_vbus_on(struct phy_8x16 *qphy) +{ + phy_8x16_notify_connect(&qphy->phy, USB_SPEED_UNKNOWN); + + /* Switch D+/D- lines to Device connector */ + gpiod_set_value_cansleep(qphy->switch_gpio, 0); + + return 0; +} + +static int phy_8x16_vbus_off(struct phy_8x16 *qphy) +{ + phy_8x16_notify_disconnect(&qphy->phy, USB_SPEED_UNKNOWN); + + /* Switch D+/D- lines to USB HUB */ + gpiod_set_value_cansleep(qphy->switch_gpio, 1); + + return 0; +} + +static int phy_8x16_vbus_notify(struct notifier_block *nb, unsigned long event, + void *ptr) +{ + struct phy_8x16 *qphy = container_of(nb, struct phy_8x16, vbus_notify); + + if (event) + phy_8x16_vbus_on(qphy); + else + phy_8x16_vbus_off(qphy); + + return NOTIFY_DONE; +} + +static int phy_8x16_init(struct usb_phy *phy) +{ + struct phy_8x16 *qphy = container_of(phy, struct phy_8x16, phy); + u32 val, init[] = {0x44, 0x6B, 0x24, 0x13}; + u32 addr = ULPI_EXT_VENDOR_SPECIFIC; + int idx, state; + + for (idx = 0; idx < ARRAY_SIZE(init); idx++) + usb_phy_io_write(phy, init[idx], addr + idx); + + reset_control_reset(qphy->phy_reset); + + /* Assert USB HSPHY_POR */ + val = readl(qphy->regs + HSPHY_CTRL); + val |= HSPHY_POR_ASSERT; + writel(val, qphy->regs + HSPHY_CTRL); + + /* + * wait for minimum 10 microseconds as suggested in HPG. + * Use a slightly larger value since the exact value didn't + * work 100% of the time. + */ + usleep_range(12, 15); + + /* Deassert USB HSPHY_POR */ + val = readl(qphy->regs + HSPHY_CTRL); + val &= ~HSPHY_POR_ASSERT; + writel(val, qphy->regs + HSPHY_CTRL); + + usleep_range(10, 15); + + writel(0x00, qphy->regs + HSPHY_AHBBURST); + writel(0x08, qphy->regs + HSPHY_AHBMODE); + + /* workaround for rx buffer collision issue */ + val = readl(qphy->regs + HSPHY_GENCONFIG); + val &= ~HSPHY_TXFIFO_IDLE_FORCE_DIS; + writel(val, qphy->regs + HSPHY_GENCONFIG); + + val = readl(qphy->regs + HSPHY_GENCONFIG_2); + val |= HSPHY_SESS_VLD_CTRL_EN; + writel(val, qphy->regs + HSPHY_GENCONFIG_2); + + val = ULPI_PWR_OTG_COMP_DISABLE; + usb_phy_io_write(phy, val, ULPI_SET(ULPI_PWR_CLK_MNG_REG)); + + state = extcon_get_cable_state_(qphy->vbus_edev, EXTCON_USB); + if (state) + phy_8x16_vbus_on(qphy); + else + phy_8x16_vbus_off(qphy); + + val = usb_phy_io_read(&qphy->phy, ULPI_FUNC_CTRL); + val &= ~ULPI_FUNC_CTRL_OPMODE_MASK; + val |= ULPI_FUNC_CTRL_OPMODE_NORMAL; + usb_phy_io_write(&qphy->phy, val, ULPI_FUNC_CTRL); + + return 0; +} + +static void phy_8x16_shutdown(struct usb_phy *phy) +{ + u32 val; + + /* Put the controller in non-driving mode */ + val = usb_phy_io_read(phy, ULPI_FUNC_CTRL); + val &= ~ULPI_FUNC_CTRL_OPMODE_MASK; + val |= ULPI_FUNC_CTRL_OPMODE_NONDRIVING; + usb_phy_io_write(phy, val, ULPI_FUNC_CTRL); +} + +static int phy_8x16_read_devicetree(struct phy_8x16 *qphy) +{ + struct regulator_bulk_data regs[3]; + struct device *dev = qphy->phy.dev; + int ret; + + qphy->core_clk = devm_clk_get(dev, "core"); + if (IS_ERR(qphy->core_clk)) + return PTR_ERR(qphy->core_clk); + + qphy->iface_clk = devm_clk_get(dev, "iface"); + if (IS_ERR(qphy->iface_clk)) + return PTR_ERR(qphy->iface_clk); + + regs[0].supply = "v3p3"; + regs[1].supply = "v1p8"; + regs[2].supply = "vddcx"; + + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(regs), regs); + if (ret) + return ret; + + qphy->v3p3 = regs[0].consumer; + qphy->v1p8 = regs[1].consumer; + qphy->vdd = regs[2].consumer; + + qphy->phy_reset = devm_reset_control_get(dev, "phy"); + if (IS_ERR(qphy->phy_reset)) + return PTR_ERR(qphy->phy_reset); + + qphy->switch_gpio = devm_gpiod_get_optional(dev, "switch", + GPIOD_OUT_LOW); + if (IS_ERR(qphy->switch_gpio)) + return PTR_ERR(qphy->switch_gpio); + + return 0; +} + +static int phy_8x16_reboot_notify(struct notifier_block *this, + unsigned long code, void *unused) +{ + struct phy_8x16 *qphy; + + qphy = container_of(this, struct phy_8x16, reboot_notify); + + /* + * Ensure that D+/D- lines are routed to uB connector, so + * we could load bootloader/kernel at next reboot_notify + */ + gpiod_set_value_cansleep(qphy->switch_gpio, 0); + return NOTIFY_DONE; +} + +static int phy_8x16_probe(struct platform_device *pdev) +{ + struct phy_8x16 *qphy; + struct resource *res; + struct usb_phy *phy; + int ret; + + qphy = devm_kzalloc(&pdev->dev, sizeof(*qphy), GFP_KERNEL); + if (!qphy) + return -ENOMEM; + + platform_set_drvdata(pdev, qphy); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -EINVAL; + + qphy->regs = devm_ioremap(&pdev->dev, res->start, resource_size(res)); + if (!qphy->regs) + return -ENOMEM; + + phy = &qphy->phy; + phy->dev = &pdev->dev; + phy->label = dev_name(&pdev->dev); + phy->init = phy_8x16_init; + phy->shutdown = phy_8x16_shutdown; + phy->notify_connect = phy_8x16_notify_connect; + phy->notify_disconnect = phy_8x16_notify_disconnect; + phy->io_priv = qphy->regs + HSPHY_ULPI_VIEWPORT; + phy->io_ops = &ulpi_viewport_access_ops; + phy->type = USB_PHY_TYPE_USB2; + + ret = phy_8x16_read_devicetree(qphy); + if (ret < 0) + return ret; + + qphy->vbus_edev = extcon_get_edev_by_phandle(phy->dev, 0); + if (IS_ERR(qphy->vbus_edev)) + return PTR_ERR(qphy->vbus_edev); + + ret = clk_set_rate(qphy->core_clk, INT_MAX); + if (ret < 0) + dev_dbg(phy->dev, "Can't boost core clock\n"); + + ret = clk_prepare_enable(qphy->core_clk); + if (ret < 0) + return ret; + + ret = clk_prepare_enable(qphy->iface_clk); + if (ret < 0) + goto off_core; + + ret = phy_8x16_regulators_enable(qphy); + if (0 && ret) + goto off_clks; + + qphy->vbus_notify.notifier_call = phy_8x16_vbus_notify; + ret = extcon_register_notifier(qphy->vbus_edev, EXTCON_USB, + &qphy->vbus_notify); + if (ret < 0) + goto off_power; + + ret = usb_add_phy_dev(&qphy->phy); + if (ret) + goto off_extcon; + + qphy->reboot_notify.notifier_call = phy_8x16_reboot_notify; + register_reboot_notifier(&qphy->reboot_notify); + + return 0; + +off_extcon: + extcon_unregister_notifier(qphy->vbus_edev, EXTCON_USB, + &qphy->vbus_notify); +off_power: + phy_8x16_regulators_disable(qphy); +off_clks: + clk_disable_unprepare(qphy->iface_clk); +off_core: + clk_disable_unprepare(qphy->core_clk); + return ret; +} + +static int phy_8x16_remove(struct platform_device *pdev) +{ + struct phy_8x16 *qphy = platform_get_drvdata(pdev); + + unregister_reboot_notifier(&qphy->reboot_notify); + extcon_unregister_notifier(qphy->vbus_edev, EXTCON_USB, + &qphy->vbus_notify); + + /* + * Ensure that D+/D- lines are routed to uB connector, so + * we could load bootloader/kernel at next reboot_notify + */ + gpiod_set_value_cansleep(qphy->switch_gpio, 0); + + usb_remove_phy(&qphy->phy); + + clk_disable_unprepare(qphy->iface_clk); + clk_disable_unprepare(qphy->core_clk); + phy_8x16_regulators_disable(qphy); + return 0; +} + +static const struct of_device_id phy_8x16_dt_match[] = { + { .compatible = "qcom,usb-8x16-phy" }, + { } +}; +MODULE_DEVICE_TABLE(of, phy_8x16_dt_match); + +static struct platform_driver phy_8x16_driver = { + .probe = phy_8x16_probe, + .remove = phy_8x16_remove, + .driver = { + .name = "phy-qcom-8x16-usb", + .of_match_table = phy_8x16_dt_match, + }, +}; +module_platform_driver(phy_8x16_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Qualcomm APQ8016/MSM8916 chipsets USB transceiver driver"); |