summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/usb/phy/phy-msm-usb.c
diff options
context:
space:
mode:
authorJosé Pekkarinen <jose.pekkarinen@nokia.com>2016-04-11 10:41:07 +0300
committerJosé Pekkarinen <jose.pekkarinen@nokia.com>2016-04-13 08:17:18 +0300
commite09b41010ba33a20a87472ee821fa407a5b8da36 (patch)
treed10dc367189862e7ca5c592f033dc3726e1df4e3 /kernel/drivers/usb/phy/phy-msm-usb.c
parentf93b97fd65072de626c074dbe099a1fff05ce060 (diff)
These changes are the raw update to linux-4.4.6-rt14. Kernel sources
are taken from kernel.org, and rt patch from the rt wiki download page. During the rebasing, the following patch collided: Force tick interrupt and get rid of softirq magic(I70131fb85). Collisions have been removed because its logic was found on the source already. Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769 Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>
Diffstat (limited to 'kernel/drivers/usb/phy/phy-msm-usb.c')
-rw-r--r--kernel/drivers/usb/phy/phy-msm-usb.c202
1 files changed, 185 insertions, 17 deletions
diff --git a/kernel/drivers/usb/phy/phy-msm-usb.c b/kernel/drivers/usb/phy/phy-msm-usb.c
index c9156beea..970a30e15 100644
--- a/kernel/drivers/usb/phy/phy-msm-usb.c
+++ b/kernel/drivers/usb/phy/phy-msm-usb.c
@@ -18,6 +18,7 @@
#include <linux/module.h>
#include <linux/device.h>
+#include <linux/gpio/consumer.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/slab.h>
@@ -32,6 +33,7 @@
#include <linux/pm_runtime.h>
#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/reboot.h>
#include <linux/reset.h>
#include <linux/usb.h>
@@ -240,8 +242,14 @@ static void ulpi_init(struct msm_otg *motg)
static int msm_phy_notify_disconnect(struct usb_phy *phy,
enum usb_device_speed speed)
{
+ struct msm_otg *motg = container_of(phy, struct msm_otg, phy);
int val;
+ if (motg->manual_pullup) {
+ val = ULPI_MISC_A_VBUSVLDEXT | ULPI_MISC_A_VBUSVLDEXTSEL;
+ usb_phy_io_write(phy, val, ULPI_CLR(ULPI_MISC_A));
+ }
+
/*
* Put the transceiver in non-driving mode. Otherwise host
* may not detect soft-disconnection.
@@ -422,6 +430,24 @@ static int msm_phy_init(struct usb_phy *phy)
ulpi_write(phy, ulpi_val, ULPI_USB_INT_EN_FALL);
}
+ if (motg->manual_pullup) {
+ val = ULPI_MISC_A_VBUSVLDEXTSEL | ULPI_MISC_A_VBUSVLDEXT;
+ ulpi_write(phy, val, ULPI_SET(ULPI_MISC_A));
+
+ val = readl(USB_GENCONFIG_2);
+ val |= GENCONFIG_2_SESS_VLD_CTRL_EN;
+ writel(val, USB_GENCONFIG_2);
+
+ val = readl(USB_USBCMD);
+ val |= USBCMD_SESS_VLD_CTRL;
+ writel(val, USB_USBCMD);
+
+ val = ulpi_read(phy, ULPI_FUNC_CTRL);
+ val &= ~ULPI_FUNC_CTRL_OPMODE_MASK;
+ val |= ULPI_FUNC_CTRL_OPMODE_NORMAL;
+ ulpi_write(phy, val, ULPI_FUNC_CTRL);
+ }
+
if (motg->phy_number)
writel(readl(USB_PHY_CTRL2) | BIT(16), USB_PHY_CTRL2);
@@ -1436,10 +1462,50 @@ static const struct of_device_id msm_otg_dt_match[] = {
};
MODULE_DEVICE_TABLE(of, msm_otg_dt_match);
+static int msm_otg_vbus_notifier(struct notifier_block *nb, unsigned long event,
+ void *ptr)
+{
+ struct msm_usb_cable *vbus = container_of(nb, struct msm_usb_cable, nb);
+ struct msm_otg *motg = container_of(vbus, struct msm_otg, vbus);
+
+ if (event)
+ set_bit(B_SESS_VLD, &motg->inputs);
+ else
+ clear_bit(B_SESS_VLD, &motg->inputs);
+
+ if (test_bit(B_SESS_VLD, &motg->inputs)) {
+ /* Switch D+/D- lines to Device connector */
+ gpiod_set_value_cansleep(motg->switch_gpio, 0);
+ } else {
+ /* Switch D+/D- lines to Hub */
+ gpiod_set_value_cansleep(motg->switch_gpio, 1);
+ }
+
+ schedule_work(&motg->sm_work);
+
+ return NOTIFY_DONE;
+}
+
+static int msm_otg_id_notifier(struct notifier_block *nb, unsigned long event,
+ void *ptr)
+{
+ struct msm_usb_cable *id = container_of(nb, struct msm_usb_cable, nb);
+ struct msm_otg *motg = container_of(id, struct msm_otg, id);
+
+ if (event)
+ clear_bit(ID, &motg->inputs);
+ else
+ set_bit(ID, &motg->inputs);
+
+ schedule_work(&motg->sm_work);
+
+ return NOTIFY_DONE;
+}
+
static int msm_otg_read_dt(struct platform_device *pdev, struct msm_otg *motg)
{
struct msm_otg_platform_data *pdata;
- const struct of_device_id *id;
+ struct extcon_dev *ext_id, *ext_vbus;
struct device_node *node = pdev->dev.of_node;
struct property *prop;
int len, ret, words;
@@ -1451,8 +1517,9 @@ static int msm_otg_read_dt(struct platform_device *pdev, struct msm_otg *motg)
motg->pdata = pdata;
- id = of_match_device(msm_otg_dt_match, &pdev->dev);
- pdata->phy_type = (enum msm_usb_phy_type) id->data;
+ pdata->phy_type = (enum msm_usb_phy_type)of_device_get_match_data(&pdev->dev);
+ if (!pdata->phy_type)
+ return 1;
motg->link_rst = devm_reset_control_get(&pdev->dev, "link");
if (IS_ERR(motg->link_rst))
@@ -1462,7 +1529,7 @@ static int msm_otg_read_dt(struct platform_device *pdev, struct msm_otg *motg)
if (IS_ERR(motg->phy_rst))
motg->phy_rst = NULL;
- pdata->mode = of_usb_get_dr_mode(node);
+ pdata->mode = usb_get_dr_mode(&pdev->dev);
if (pdata->mode == USB_DR_MODE_UNKNOWN)
pdata->mode = USB_DR_MODE_OTG;
@@ -1487,6 +1554,63 @@ static int msm_otg_read_dt(struct platform_device *pdev, struct msm_otg *motg)
motg->vdd_levels[VDD_LEVEL_MAX] = tmp[VDD_LEVEL_MAX];
}
+ motg->manual_pullup = of_property_read_bool(node, "qcom,manual-pullup");
+
+ motg->switch_gpio = devm_gpiod_get_optional(&pdev->dev, "switch",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(motg->switch_gpio))
+ return PTR_ERR(motg->switch_gpio);
+
+ ext_id = ERR_PTR(-ENODEV);
+ ext_vbus = ERR_PTR(-ENODEV);
+ if (of_property_read_bool(node, "extcon")) {
+
+ /* Each one of them is not mandatory */
+ ext_vbus = extcon_get_edev_by_phandle(&pdev->dev, 0);
+ if (IS_ERR(ext_vbus) && PTR_ERR(ext_vbus) != -ENODEV)
+ return PTR_ERR(ext_vbus);
+
+ ext_id = extcon_get_edev_by_phandle(&pdev->dev, 1);
+ if (IS_ERR(ext_id) && PTR_ERR(ext_id) != -ENODEV)
+ return PTR_ERR(ext_id);
+ }
+
+ if (!IS_ERR(ext_vbus)) {
+ motg->vbus.extcon = ext_vbus;
+ motg->vbus.nb.notifier_call = msm_otg_vbus_notifier;
+ ret = extcon_register_notifier(ext_vbus, EXTCON_USB,
+ &motg->vbus.nb);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "register VBUS notifier failed\n");
+ return ret;
+ }
+
+ ret = extcon_get_cable_state_(ext_vbus, EXTCON_USB);
+ if (ret)
+ set_bit(B_SESS_VLD, &motg->inputs);
+ else
+ clear_bit(B_SESS_VLD, &motg->inputs);
+ }
+
+ if (!IS_ERR(ext_id)) {
+ motg->id.extcon = ext_id;
+ motg->id.nb.notifier_call = msm_otg_id_notifier;
+ ret = extcon_register_notifier(ext_id, EXTCON_USB_HOST,
+ &motg->id.nb);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "register ID notifier failed\n");
+ extcon_unregister_notifier(motg->vbus.extcon,
+ EXTCON_USB, &motg->vbus.nb);
+ return ret;
+ }
+
+ ret = extcon_get_cable_state_(ext_id, EXTCON_USB_HOST);
+ if (ret)
+ clear_bit(ID, &motg->inputs);
+ else
+ set_bit(ID, &motg->inputs);
+ }
+
prop = of_find_property(node, "qcom,phy-init-sequence", &len);
if (!prop || !len)
return 0;
@@ -1510,6 +1634,19 @@ static int msm_otg_read_dt(struct platform_device *pdev, struct msm_otg *motg)
return 0;
}
+static int msm_otg_reboot_notify(struct notifier_block *this,
+ unsigned long code, void *unused)
+{
+ struct msm_otg *motg = container_of(this, struct msm_otg, reboot);
+
+ /*
+ * Ensure that D+/D- lines are routed to uB connector, so
+ * we could load bootloader/kernel at next reboot
+ */
+ gpiod_set_value_cansleep(motg->switch_gpio, 0);
+ return NOTIFY_DONE;
+}
+
static int msm_otg_probe(struct platform_device *pdev)
{
struct regulator_bulk_data regs[3];
@@ -1525,15 +1662,6 @@ static int msm_otg_probe(struct platform_device *pdev)
if (!motg)
return -ENOMEM;
- pdata = dev_get_platdata(&pdev->dev);
- if (!pdata) {
- if (!np)
- return -ENXIO;
- ret = msm_otg_read_dt(pdev, motg);
- if (ret)
- return ret;
- }
-
motg->phy.otg = devm_kzalloc(&pdev->dev, sizeof(struct usb_otg),
GFP_KERNEL);
if (!motg->phy.otg)
@@ -1575,6 +1703,15 @@ static int msm_otg_probe(struct platform_device *pdev)
if (!motg->regs)
return -ENOMEM;
+ pdata = dev_get_platdata(&pdev->dev);
+ if (!pdata) {
+ if (!np)
+ return -ENXIO;
+ ret = msm_otg_read_dt(pdev, motg);
+ if (ret)
+ return ret;
+ }
+
/*
* NOTE: The PHYs can be multiplexed between the chipidea controller
* and the dwc3 controller, using a single bit. It is important that
@@ -1582,8 +1719,10 @@ static int msm_otg_probe(struct platform_device *pdev)
*/
if (motg->phy_number) {
phy_select = devm_ioremap_nocache(&pdev->dev, USB2_PHY_SEL, 4);
- if (!phy_select)
- return -ENOMEM;
+ if (!phy_select) {
+ ret = -ENOMEM;
+ goto unregister_extcon;
+ }
/* Enable second PHY with the OTG port */
writel(0x1, phy_select);
}
@@ -1593,7 +1732,8 @@ static int msm_otg_probe(struct platform_device *pdev)
motg->irq = platform_get_irq(pdev, 0);
if (motg->irq < 0) {
dev_err(&pdev->dev, "platform_get_irq failed\n");
- return motg->irq;
+ ret = motg->irq;
+ goto unregister_extcon;
}
regs[0].supply = "vddcx";
@@ -1602,7 +1742,7 @@ static int msm_otg_probe(struct platform_device *pdev)
ret = devm_regulator_bulk_get(motg->phy.dev, ARRAY_SIZE(regs), regs);
if (ret)
- return ret;
+ goto unregister_extcon;
motg->vddcx = regs[0].consumer;
motg->v3p3 = regs[1].consumer;
@@ -1674,6 +1814,17 @@ static int msm_otg_probe(struct platform_device *pdev)
dev_dbg(&pdev->dev, "Can not create mode change file\n");
}
+ if (test_bit(B_SESS_VLD, &motg->inputs)) {
+ /* Switch D+/D- lines to Device connector */
+ gpiod_set_value_cansleep(motg->switch_gpio, 0);
+ } else {
+ /* Switch D+/D- lines to Hub */
+ gpiod_set_value_cansleep(motg->switch_gpio, 1);
+ }
+
+ motg->reboot.notifier_call = msm_otg_reboot_notify;
+ register_reboot_notifier(&motg->reboot);
+
pm_runtime_set_active(&pdev->dev);
pm_runtime_enable(&pdev->dev);
@@ -1688,6 +1839,12 @@ disable_clks:
clk_disable_unprepare(motg->clk);
if (!IS_ERR(motg->core_clk))
clk_disable_unprepare(motg->core_clk);
+unregister_extcon:
+ extcon_unregister_notifier(motg->id.extcon,
+ EXTCON_USB_HOST, &motg->id.nb);
+ extcon_unregister_notifier(motg->vbus.extcon,
+ EXTCON_USB, &motg->vbus.nb);
+
return ret;
}
@@ -1700,6 +1857,17 @@ static int msm_otg_remove(struct platform_device *pdev)
if (phy->otg->host || phy->otg->gadget)
return -EBUSY;
+ unregister_reboot_notifier(&motg->reboot);
+
+ /*
+ * Ensure that D+/D- lines are routed to uB connector, so
+ * we could load bootloader/kernel at next reboot
+ */
+ gpiod_set_value_cansleep(motg->switch_gpio, 0);
+
+ extcon_unregister_notifier(motg->id.extcon, EXTCON_USB_HOST, &motg->id.nb);
+ extcon_unregister_notifier(motg->vbus.extcon, EXTCON_USB, &motg->vbus.nb);
+
msm_otg_debugfs_cleanup();
cancel_delayed_work_sync(&motg->chg_work);
cancel_work_sync(&motg->sm_work);