summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/usb/musb/davinci.c
diff options
context:
space:
mode:
authorYunhong Jiang <yunhong.jiang@intel.com>2015-08-04 12:17:53 -0700
committerYunhong Jiang <yunhong.jiang@intel.com>2015-08-04 15:44:42 -0700
commit9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 (patch)
tree1c9cafbcd35f783a87880a10f85d1a060db1a563 /kernel/drivers/usb/musb/davinci.c
parent98260f3884f4a202f9ca5eabed40b1354c489b29 (diff)
Add the rt linux 4.1.3-rt3 as base
Import the rt linux 4.1.3-rt3 as OPNFV kvm base. It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and the base is: commit 0917f823c59692d751951bf5ea699a2d1e2f26a2 Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Date: Sat Jul 25 12:13:34 2015 +0200 Prepare v4.1.3-rt3 Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> We lose all the git history this way and it's not good. We should apply another opnfv project repo in future. Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423 Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>
Diffstat (limited to 'kernel/drivers/usb/musb/davinci.c')
-rw-r--r--kernel/drivers/usb/musb/davinci.c614
1 files changed, 614 insertions, 0 deletions
diff --git a/kernel/drivers/usb/musb/davinci.c b/kernel/drivers/usb/musb/davinci.c
new file mode 100644
index 000000000..3c1d9b211
--- /dev/null
+++ b/kernel/drivers/usb/musb/davinci.c
@@ -0,0 +1,614 @@
+/*
+ * Copyright (C) 2005-2006 by Texas Instruments
+ *
+ * This file is part of the Inventra Controller Driver for Linux.
+ *
+ * The Inventra Controller Driver for Linux is free software; you
+ * can redistribute it and/or modify it under the terms of the GNU
+ * General Public License version 2 as published by the Free Software
+ * Foundation.
+ *
+ * The Inventra Controller Driver for Linux is distributed in
+ * the hope that it will be useful, but WITHOUT ANY WARRANTY;
+ * without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
+ * License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with The Inventra Controller Driver for Linux ; if not,
+ * write to the Free Software Foundation, Inc., 59 Temple Place,
+ * Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/list.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/usb/usb_phy_generic.h>
+
+#include <mach/cputype.h>
+#include <mach/hardware.h>
+
+#include <asm/mach-types.h>
+
+#include "musb_core.h"
+
+#ifdef CONFIG_MACH_DAVINCI_EVM
+#define GPIO_nVBUS_DRV 160
+#endif
+
+#include "davinci.h"
+#include "cppi_dma.h"
+
+
+#define USB_PHY_CTRL IO_ADDRESS(USBPHY_CTL_PADDR)
+#define DM355_DEEPSLEEP IO_ADDRESS(DM355_DEEPSLEEP_PADDR)
+
+struct davinci_glue {
+ struct device *dev;
+ struct platform_device *musb;
+ struct clk *clk;
+};
+
+/* REVISIT (PM) we should be able to keep the PHY in low power mode most
+ * of the time (24 MHZ oscillator and PLL off, etc) by setting POWER.D0
+ * and, when in host mode, autosuspending idle root ports... PHYPLLON
+ * (overriding SUSPENDM?) then likely needs to stay off.
+ */
+
+static inline void phy_on(void)
+{
+ u32 phy_ctrl = __raw_readl(USB_PHY_CTRL);
+
+ /* power everything up; start the on-chip PHY and its PLL */
+ phy_ctrl &= ~(USBPHY_OSCPDWN | USBPHY_OTGPDWN | USBPHY_PHYPDWN);
+ phy_ctrl |= USBPHY_SESNDEN | USBPHY_VBDTCTEN | USBPHY_PHYPLLON;
+ __raw_writel(phy_ctrl, USB_PHY_CTRL);
+
+ /* wait for PLL to lock before proceeding */
+ while ((__raw_readl(USB_PHY_CTRL) & USBPHY_PHYCLKGD) == 0)
+ cpu_relax();
+}
+
+static inline void phy_off(void)
+{
+ u32 phy_ctrl = __raw_readl(USB_PHY_CTRL);
+
+ /* powerdown the on-chip PHY, its PLL, and the OTG block */
+ phy_ctrl &= ~(USBPHY_SESNDEN | USBPHY_VBDTCTEN | USBPHY_PHYPLLON);
+ phy_ctrl |= USBPHY_OSCPDWN | USBPHY_OTGPDWN | USBPHY_PHYPDWN;
+ __raw_writel(phy_ctrl, USB_PHY_CTRL);
+}
+
+static int dma_off = 1;
+
+static void davinci_musb_enable(struct musb *musb)
+{
+ u32 tmp, old, val;
+
+ /* workaround: setup irqs through both register sets */
+ tmp = (musb->epmask & DAVINCI_USB_TX_ENDPTS_MASK)
+ << DAVINCI_USB_TXINT_SHIFT;
+ musb_writel(musb->ctrl_base, DAVINCI_USB_INT_MASK_SET_REG, tmp);
+ old = tmp;
+ tmp = (musb->epmask & (0xfffe & DAVINCI_USB_RX_ENDPTS_MASK))
+ << DAVINCI_USB_RXINT_SHIFT;
+ musb_writel(musb->ctrl_base, DAVINCI_USB_INT_MASK_SET_REG, tmp);
+ tmp |= old;
+
+ val = ~MUSB_INTR_SOF;
+ tmp |= ((val & 0x01ff) << DAVINCI_USB_USBINT_SHIFT);
+ musb_writel(musb->ctrl_base, DAVINCI_USB_INT_MASK_SET_REG, tmp);
+
+ if (is_dma_capable() && !dma_off)
+ printk(KERN_WARNING "%s %s: dma not reactivated\n",
+ __FILE__, __func__);
+ else
+ dma_off = 0;
+
+ /* force a DRVVBUS irq so we can start polling for ID change */
+ musb_writel(musb->ctrl_base, DAVINCI_USB_INT_SET_REG,
+ DAVINCI_INTR_DRVVBUS << DAVINCI_USB_USBINT_SHIFT);
+}
+
+/*
+ * Disable the HDRC and flush interrupts
+ */
+static void davinci_musb_disable(struct musb *musb)
+{
+ /* because we don't set CTRLR.UINT, "important" to:
+ * - not read/write INTRUSB/INTRUSBE
+ * - (except during initial setup, as workaround)
+ * - use INTSETR/INTCLRR instead
+ */
+ musb_writel(musb->ctrl_base, DAVINCI_USB_INT_MASK_CLR_REG,
+ DAVINCI_USB_USBINT_MASK
+ | DAVINCI_USB_TXINT_MASK
+ | DAVINCI_USB_RXINT_MASK);
+ musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
+ musb_writel(musb->ctrl_base, DAVINCI_USB_EOI_REG, 0);
+
+ if (is_dma_capable() && !dma_off)
+ WARNING("dma still active\n");
+}
+
+
+#define portstate(stmt) stmt
+
+/*
+ * VBUS SWITCHING IS BOARD-SPECIFIC ... at least for the DM6446 EVM,
+ * which doesn't wire DRVVBUS to the FET that switches it. Unclear
+ * if that's a problem with the DM6446 chip or just with that board.
+ *
+ * In either case, the DM355 EVM automates DRVVBUS the normal way,
+ * when J10 is out, and TI documents it as handling OTG.
+ */
+
+#ifdef CONFIG_MACH_DAVINCI_EVM
+
+static int vbus_state = -1;
+
+/* I2C operations are always synchronous, and require a task context.
+ * With unloaded systems, using the shared workqueue seems to suffice
+ * to satisfy the 100msec A_WAIT_VRISE timeout...
+ */
+static void evm_deferred_drvvbus(struct work_struct *ignored)
+{
+ gpio_set_value_cansleep(GPIO_nVBUS_DRV, vbus_state);
+ vbus_state = !vbus_state;
+}
+
+#endif /* EVM */
+
+static void davinci_musb_source_power(struct musb *musb, int is_on, int immediate)
+{
+#ifdef CONFIG_MACH_DAVINCI_EVM
+ if (is_on)
+ is_on = 1;
+
+ if (vbus_state == is_on)
+ return;
+ vbus_state = !is_on; /* 0/1 vs "-1 == unknown/init" */
+
+ if (machine_is_davinci_evm()) {
+ static DECLARE_WORK(evm_vbus_work, evm_deferred_drvvbus);
+
+ if (immediate)
+ gpio_set_value_cansleep(GPIO_nVBUS_DRV, vbus_state);
+ else
+ schedule_work(&evm_vbus_work);
+ }
+ if (immediate)
+ vbus_state = is_on;
+#endif
+}
+
+static void davinci_musb_set_vbus(struct musb *musb, int is_on)
+{
+ WARN_ON(is_on && is_peripheral_active(musb));
+ davinci_musb_source_power(musb, is_on, 0);
+}
+
+
+#define POLL_SECONDS 2
+
+static struct timer_list otg_workaround;
+
+static void otg_timer(unsigned long _musb)
+{
+ struct musb *musb = (void *)_musb;
+ void __iomem *mregs = musb->mregs;
+ u8 devctl;
+ unsigned long flags;
+
+ /* We poll because DaVinci's won't expose several OTG-critical
+ * status change events (from the transceiver) otherwise.
+ */
+ devctl = musb_readb(mregs, MUSB_DEVCTL);
+ dev_dbg(musb->controller, "poll devctl %02x (%s)\n", devctl,
+ usb_otg_state_string(musb->xceiv->otg->state));
+
+ spin_lock_irqsave(&musb->lock, flags);
+ switch (musb->xceiv->otg->state) {
+ case OTG_STATE_A_WAIT_VFALL:
+ /* Wait till VBUS falls below SessionEnd (~0.2V); the 1.3 RTL
+ * seems to mis-handle session "start" otherwise (or in our
+ * case "recover"), in routine "VBUS was valid by the time
+ * VBUSERR got reported during enumeration" cases.
+ */
+ if (devctl & MUSB_DEVCTL_VBUS) {
+ mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
+ break;
+ }
+ musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
+ musb_writel(musb->ctrl_base, DAVINCI_USB_INT_SET_REG,
+ MUSB_INTR_VBUSERROR << DAVINCI_USB_USBINT_SHIFT);
+ break;
+ case OTG_STATE_B_IDLE:
+ /*
+ * There's no ID-changed IRQ, so we have no good way to tell
+ * when to switch to the A-Default state machine (by setting
+ * the DEVCTL.SESSION flag).
+ *
+ * Workaround: whenever we're in B_IDLE, try setting the
+ * session flag every few seconds. If it works, ID was
+ * grounded and we're now in the A-Default state machine.
+ *
+ * NOTE setting the session flag is _supposed_ to trigger
+ * SRP, but clearly it doesn't.
+ */
+ musb_writeb(mregs, MUSB_DEVCTL,
+ devctl | MUSB_DEVCTL_SESSION);
+ devctl = musb_readb(mregs, MUSB_DEVCTL);
+ if (devctl & MUSB_DEVCTL_BDEVICE)
+ mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
+ else
+ musb->xceiv->otg->state = OTG_STATE_A_IDLE;
+ break;
+ default:
+ break;
+ }
+ spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+static irqreturn_t davinci_musb_interrupt(int irq, void *__hci)
+{
+ unsigned long flags;
+ irqreturn_t retval = IRQ_NONE;
+ struct musb *musb = __hci;
+ struct usb_otg *otg = musb->xceiv->otg;
+ void __iomem *tibase = musb->ctrl_base;
+ struct cppi *cppi;
+ u32 tmp;
+
+ spin_lock_irqsave(&musb->lock, flags);
+
+ /* NOTE: DaVinci shadows the Mentor IRQs. Don't manage them through
+ * the Mentor registers (except for setup), use the TI ones and EOI.
+ *
+ * Docs describe irq "vector" registers associated with the CPPI and
+ * USB EOI registers. These hold a bitmask corresponding to the
+ * current IRQ, not an irq handler address. Would using those bits
+ * resolve some of the races observed in this dispatch code??
+ */
+
+ /* CPPI interrupts share the same IRQ line, but have their own
+ * mask, state, "vector", and EOI registers.
+ */
+ cppi = container_of(musb->dma_controller, struct cppi, controller);
+ if (is_cppi_enabled() && musb->dma_controller && !cppi->irq)
+ retval = cppi_interrupt(irq, __hci);
+
+ /* ack and handle non-CPPI interrupts */
+ tmp = musb_readl(tibase, DAVINCI_USB_INT_SRC_MASKED_REG);
+ musb_writel(tibase, DAVINCI_USB_INT_SRC_CLR_REG, tmp);
+ dev_dbg(musb->controller, "IRQ %08x\n", tmp);
+
+ musb->int_rx = (tmp & DAVINCI_USB_RXINT_MASK)
+ >> DAVINCI_USB_RXINT_SHIFT;
+ musb->int_tx = (tmp & DAVINCI_USB_TXINT_MASK)
+ >> DAVINCI_USB_TXINT_SHIFT;
+ musb->int_usb = (tmp & DAVINCI_USB_USBINT_MASK)
+ >> DAVINCI_USB_USBINT_SHIFT;
+
+ /* DRVVBUS irqs are the only proxy we have (a very poor one!) for
+ * DaVinci's missing ID change IRQ. We need an ID change IRQ to
+ * switch appropriately between halves of the OTG state machine.
+ * Managing DEVCTL.SESSION per Mentor docs requires we know its
+ * value, but DEVCTL.BDEVICE is invalid without DEVCTL.SESSION set.
+ * Also, DRVVBUS pulses for SRP (but not at 5V) ...
+ */
+ if (tmp & (DAVINCI_INTR_DRVVBUS << DAVINCI_USB_USBINT_SHIFT)) {
+ int drvvbus = musb_readl(tibase, DAVINCI_USB_STAT_REG);
+ void __iomem *mregs = musb->mregs;
+ u8 devctl = musb_readb(mregs, MUSB_DEVCTL);
+ int err = musb->int_usb & MUSB_INTR_VBUSERROR;
+
+ err = musb->int_usb & MUSB_INTR_VBUSERROR;
+ if (err) {
+ /* The Mentor core doesn't debounce VBUS as needed
+ * to cope with device connect current spikes. This
+ * means it's not uncommon for bus-powered devices
+ * to get VBUS errors during enumeration.
+ *
+ * This is a workaround, but newer RTL from Mentor
+ * seems to allow a better one: "re"starting sessions
+ * without waiting (on EVM, a **long** time) for VBUS
+ * to stop registering in devctl.
+ */
+ musb->int_usb &= ~MUSB_INTR_VBUSERROR;
+ musb->xceiv->otg->state = OTG_STATE_A_WAIT_VFALL;
+ mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
+ WARNING("VBUS error workaround (delay coming)\n");
+ } else if (drvvbus) {
+ MUSB_HST_MODE(musb);
+ otg->default_a = 1;
+ musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
+ portstate(musb->port1_status |= USB_PORT_STAT_POWER);
+ del_timer(&otg_workaround);
+ } else {
+ musb->is_active = 0;
+ MUSB_DEV_MODE(musb);
+ otg->default_a = 0;
+ musb->xceiv->otg->state = OTG_STATE_B_IDLE;
+ portstate(musb->port1_status &= ~USB_PORT_STAT_POWER);
+ }
+
+ /* NOTE: this must complete poweron within 100 msec
+ * (OTG_TIME_A_WAIT_VRISE) but we don't check for that.
+ */
+ davinci_musb_source_power(musb, drvvbus, 0);
+ dev_dbg(musb->controller, "VBUS %s (%s)%s, devctl %02x\n",
+ drvvbus ? "on" : "off",
+ usb_otg_state_string(musb->xceiv->otg->state),
+ err ? " ERROR" : "",
+ devctl);
+ retval = IRQ_HANDLED;
+ }
+
+ if (musb->int_tx || musb->int_rx || musb->int_usb)
+ retval |= musb_interrupt(musb);
+
+ /* irq stays asserted until EOI is written */
+ musb_writel(tibase, DAVINCI_USB_EOI_REG, 0);
+
+ /* poll for ID change */
+ if (musb->xceiv->otg->state == OTG_STATE_B_IDLE)
+ mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
+
+ spin_unlock_irqrestore(&musb->lock, flags);
+
+ return retval;
+}
+
+static int davinci_musb_set_mode(struct musb *musb, u8 mode)
+{
+ /* EVM can't do this (right?) */
+ return -EIO;
+}
+
+static int davinci_musb_init(struct musb *musb)
+{
+ void __iomem *tibase = musb->ctrl_base;
+ u32 revision;
+ int ret = -ENODEV;
+
+ musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
+ if (IS_ERR_OR_NULL(musb->xceiv)) {
+ ret = -EPROBE_DEFER;
+ goto unregister;
+ }
+
+ musb->mregs += DAVINCI_BASE_OFFSET;
+
+ /* returns zero if e.g. not clocked */
+ revision = musb_readl(tibase, DAVINCI_USB_VERSION_REG);
+ if (revision == 0)
+ goto fail;
+
+ setup_timer(&otg_workaround, otg_timer, (unsigned long) musb);
+
+ davinci_musb_source_power(musb, 0, 1);
+
+ /* dm355 EVM swaps D+/D- for signal integrity, and
+ * is clocked from the main 24 MHz crystal.
+ */
+ if (machine_is_davinci_dm355_evm()) {
+ u32 phy_ctrl = __raw_readl(USB_PHY_CTRL);
+
+ phy_ctrl &= ~(3 << 9);
+ phy_ctrl |= USBPHY_DATAPOL;
+ __raw_writel(phy_ctrl, USB_PHY_CTRL);
+ }
+
+ /* On dm355, the default-A state machine needs DRVVBUS control.
+ * If we won't be a host, there's no need to turn it on.
+ */
+ if (cpu_is_davinci_dm355()) {
+ u32 deepsleep = __raw_readl(DM355_DEEPSLEEP);
+
+ deepsleep &= ~DRVVBUS_FORCE;
+ __raw_writel(deepsleep, DM355_DEEPSLEEP);
+ }
+
+ /* reset the controller */
+ musb_writel(tibase, DAVINCI_USB_CTRL_REG, 0x1);
+
+ /* start the on-chip PHY and its PLL */
+ phy_on();
+
+ msleep(5);
+
+ /* NOTE: irqs are in mixed mode, not bypass to pure-musb */
+ pr_debug("DaVinci OTG revision %08x phy %03x control %02x\n",
+ revision, __raw_readl(USB_PHY_CTRL),
+ musb_readb(tibase, DAVINCI_USB_CTRL_REG));
+
+ musb->isr = davinci_musb_interrupt;
+ return 0;
+
+fail:
+ usb_put_phy(musb->xceiv);
+unregister:
+ usb_phy_generic_unregister();
+ return ret;
+}
+
+static int davinci_musb_exit(struct musb *musb)
+{
+ del_timer_sync(&otg_workaround);
+
+ /* force VBUS off */
+ if (cpu_is_davinci_dm355()) {
+ u32 deepsleep = __raw_readl(DM355_DEEPSLEEP);
+
+ deepsleep &= ~DRVVBUS_FORCE;
+ deepsleep |= DRVVBUS_OVERRIDE;
+ __raw_writel(deepsleep, DM355_DEEPSLEEP);
+ }
+
+ davinci_musb_source_power(musb, 0 /*off*/, 1);
+
+ /* delay, to avoid problems with module reload */
+ if (musb->xceiv->otg->default_a) {
+ int maxdelay = 30;
+ u8 devctl, warn = 0;
+
+ /* if there's no peripheral connected, this can take a
+ * long time to fall, especially on EVM with huge C133.
+ */
+ do {
+ devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+ if (!(devctl & MUSB_DEVCTL_VBUS))
+ break;
+ if ((devctl & MUSB_DEVCTL_VBUS) != warn) {
+ warn = devctl & MUSB_DEVCTL_VBUS;
+ dev_dbg(musb->controller, "VBUS %d\n",
+ warn >> MUSB_DEVCTL_VBUS_SHIFT);
+ }
+ msleep(1000);
+ maxdelay--;
+ } while (maxdelay > 0);
+
+ /* in OTG mode, another host might be connected */
+ if (devctl & MUSB_DEVCTL_VBUS)
+ dev_dbg(musb->controller, "VBUS off timeout (devctl %02x)\n", devctl);
+ }
+
+ phy_off();
+
+ usb_put_phy(musb->xceiv);
+
+ return 0;
+}
+
+static const struct musb_platform_ops davinci_ops = {
+ .init = davinci_musb_init,
+ .exit = davinci_musb_exit,
+
+ .enable = davinci_musb_enable,
+ .disable = davinci_musb_disable,
+
+ .set_mode = davinci_musb_set_mode,
+
+ .set_vbus = davinci_musb_set_vbus,
+};
+
+static const struct platform_device_info davinci_dev_info = {
+ .name = "musb-hdrc",
+ .id = PLATFORM_DEVID_AUTO,
+ .dma_mask = DMA_BIT_MASK(32),
+};
+
+static int davinci_probe(struct platform_device *pdev)
+{
+ struct resource musb_resources[3];
+ struct musb_hdrc_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ struct platform_device *musb;
+ struct davinci_glue *glue;
+ struct platform_device_info pinfo;
+ struct clk *clk;
+
+ int ret = -ENOMEM;
+
+ glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
+ if (!glue)
+ goto err0;
+
+ clk = devm_clk_get(&pdev->dev, "usb");
+ if (IS_ERR(clk)) {
+ dev_err(&pdev->dev, "failed to get clock\n");
+ ret = PTR_ERR(clk);
+ goto err0;
+ }
+
+ ret = clk_enable(clk);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to enable clock\n");
+ goto err0;
+ }
+
+ glue->dev = &pdev->dev;
+ glue->clk = clk;
+
+ pdata->platform_ops = &davinci_ops;
+
+ usb_phy_generic_register();
+ platform_set_drvdata(pdev, glue);
+
+ memset(musb_resources, 0x00, sizeof(*musb_resources) *
+ ARRAY_SIZE(musb_resources));
+
+ musb_resources[0].name = pdev->resource[0].name;
+ musb_resources[0].start = pdev->resource[0].start;
+ musb_resources[0].end = pdev->resource[0].end;
+ musb_resources[0].flags = pdev->resource[0].flags;
+
+ musb_resources[1].name = pdev->resource[1].name;
+ musb_resources[1].start = pdev->resource[1].start;
+ musb_resources[1].end = pdev->resource[1].end;
+ musb_resources[1].flags = pdev->resource[1].flags;
+
+ /*
+ * For DM6467 3 resources are passed. A placeholder for the 3rd
+ * resource is always there, so it's safe to always copy it...
+ */
+ musb_resources[2].name = pdev->resource[2].name;
+ musb_resources[2].start = pdev->resource[2].start;
+ musb_resources[2].end = pdev->resource[2].end;
+ musb_resources[2].flags = pdev->resource[2].flags;
+
+ pinfo = davinci_dev_info;
+ pinfo.parent = &pdev->dev;
+ pinfo.res = musb_resources;
+ pinfo.num_res = ARRAY_SIZE(musb_resources);
+ pinfo.data = pdata;
+ pinfo.size_data = sizeof(*pdata);
+
+ glue->musb = musb = platform_device_register_full(&pinfo);
+ if (IS_ERR(musb)) {
+ ret = PTR_ERR(musb);
+ dev_err(&pdev->dev, "failed to register musb device: %d\n", ret);
+ goto err1;
+ }
+
+ return 0;
+
+err1:
+ clk_disable(clk);
+
+err0:
+ return ret;
+}
+
+static int davinci_remove(struct platform_device *pdev)
+{
+ struct davinci_glue *glue = platform_get_drvdata(pdev);
+
+ platform_device_unregister(glue->musb);
+ usb_phy_generic_unregister();
+ clk_disable(glue->clk);
+
+ return 0;
+}
+
+static struct platform_driver davinci_driver = {
+ .probe = davinci_probe,
+ .remove = davinci_remove,
+ .driver = {
+ .name = "musb-davinci",
+ },
+};
+
+MODULE_DESCRIPTION("DaVinci MUSB Glue Layer");
+MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
+MODULE_LICENSE("GPL v2");
+module_platform_driver(davinci_driver);