Kernel bump from 4.1.3-rt to 4.1.7-rt.

These changes brings a vanilla kernel from kernel.org, and the patch
applied for rt is patch-4.1.7-rt8.patch. No further changes needed.

Change-Id: Id8dd03c2ddd971e4d1d69b905f3069737053b700
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>

6 files changed, 28 insertions, 15 deletions

diff --git a/kernel/drivers/usb/host/ohci-q.c b/kernel/drivers/usb/host/ohci-q.c
index 1463c398d..fe1d5fc7d 100644
--- a/kernel/drivers/usb/host/ohci-q.c
+++ b/kernel/drivers/usb/host/ohci-q.c
@@ -980,10 +980,6 @@ rescan_all:
 		int			completed, modified;
 		__hc32			*prev;
 
-		/* Is this ED already invisible to the hardware? */
-		if (ed->state == ED_IDLE)
-			goto ed_idle;
-
 		/* only take off EDs that the HC isn't using, accounting for
 		 * frame counter wraps and EDs with partially retired TDs
 		 */
@@ -1011,12 +1007,10 @@ skip_ed:
 		}
 
 		/* ED's now officially unlinked, hc doesn't see */
-		ed->state = ED_IDLE;
 		ed->hwHeadP &= ~cpu_to_hc32(ohci, ED_H);
 		ed->hwNextED = 0;
 		wmb();
 		ed->hwINFO &= ~cpu_to_hc32(ohci, ED_SKIP | ED_DEQUEUE);
-ed_idle:
 
 		/* reentrancy:  if we drop the schedule lock, someone might
 		 * have modified this list.  normally it's just prepending
@@ -1087,6 +1081,7 @@ rescan_this:
 		if (list_empty(&ed->td_list)) {
 			*last = ed->ed_next;
 			ed->ed_next = NULL;
+			ed->state = ED_IDLE;
 			list_del(&ed->in_use_list);
 		} else if (ohci->rh_state == OHCI_RH_RUNNING) {
 			*last = ed->ed_next;
diff --git a/kernel/drivers/usb/host/xhci-hub.c b/kernel/drivers/usb/host/xhci-hub.c
index 0827d7c96..ee07ba41c 100644
--- a/kernel/drivers/usb/host/xhci-hub.c
+++ b/kernel/drivers/usb/host/xhci-hub.c
@@ -484,10 +484,13 @@ static void xhci_hub_report_usb3_link_state(struct xhci_hcd *xhci,
 	u32 pls = status_reg & PORT_PLS_MASK;
 
 	/* resume state is a xHCI internal state.
-	 * Do not report it to usb core.
+	 * Do not report it to usb core, instead, pretend to be U3,
+	 * thus usb core knows it's not ready for transfer
 	 */
-	if (pls == XDEV_RESUME)
+	if (pls == XDEV_RESUME) {
+		*status |= USB_SS_PORT_LS_U3;
 		return;
+	}
 
 	/* When the CAS bit is set then warm reset
 	 * should be performed on port
@@ -588,7 +591,14 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd,
 		status |= USB_PORT_STAT_C_RESET << 16;
 	/* USB3.0 only */
 	if (hcd->speed == HCD_USB3) {
-		if ((raw_port_status & PORT_PLC))
+		/* Port link change with port in resume state should not be
+		 * reported to usbcore, as this is an internal state to be
+		 * handled by xhci driver. Reporting PLC to usbcore may
+		 * cause usbcore clearing PLC first and port change event
+		 * irq won't be generated.
+		 */
+		if ((raw_port_status & PORT_PLC) &&
+			(raw_port_status & PORT_PLS_MASK) != XDEV_RESUME)
 			status |= USB_PORT_STAT_C_LINK_STATE << 16;
 		if ((raw_port_status & PORT_WRC))
 			status |= USB_PORT_STAT_C_BH_RESET << 16;
@@ -1120,10 +1130,10 @@ int xhci_bus_suspend(struct usb_hcd *hcd)
 	spin_lock_irqsave(&xhci->lock, flags);
 
 	if (hcd->self.root_hub->do_remote_wakeup) {
-		if (bus_state->resuming_ports) {
+		if (bus_state->resuming_ports ||	/* USB2 */
+		    bus_state->port_remote_wakeup) {	/* USB3 */
 			spin_unlock_irqrestore(&xhci->lock, flags);
-			xhci_dbg(xhci, "suspend failed because "
-						"a port is resuming\n");
+			xhci_dbg(xhci, "suspend failed because a port is resuming\n");
 			return -EBUSY;
 		}
 	}
diff --git a/kernel/drivers/usb/host/xhci-mem.c b/kernel/drivers/usb/host/xhci-mem.c
index f8336408e..9a8c936cd 100644
--- a/kernel/drivers/usb/host/xhci-mem.c
+++ b/kernel/drivers/usb/host/xhci-mem.c
@@ -1427,10 +1427,10 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
 		/* Attempt to use the ring cache */
 		if (virt_dev->num_rings_cached == 0)
 			return -ENOMEM;
+		virt_dev->num_rings_cached--;
 		virt_dev->eps[ep_index].new_ring =
 			virt_dev->ring_cache[virt_dev->num_rings_cached];
 		virt_dev->ring_cache[virt_dev->num_rings_cached] = NULL;
-		virt_dev->num_rings_cached--;
 		xhci_reinit_cached_ring(xhci, virt_dev->eps[ep_index].new_ring,
 					1, type);
 	}
@@ -1792,7 +1792,8 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 	int size;
 	int i, j, num_ports;
 
-	del_timer_sync(&xhci->cmd_timer);
+	if (timer_pending(&xhci->cmd_timer))
+		del_timer_sync(&xhci->cmd_timer);
 
 	/* Free the Event Ring Segment Table and the actual Event Ring */
 	size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries);
diff --git a/kernel/drivers/usb/host/xhci-ring.c b/kernel/drivers/usb/host/xhci-ring.c
index 7d34cbfaf..b3a0a2275 100644
--- a/kernel/drivers/usb/host/xhci-ring.c
+++ b/kernel/drivers/usb/host/xhci-ring.c
@@ -82,7 +82,7 @@ dma_addr_t xhci_trb_virt_to_dma(struct xhci_segment *seg,
 		return 0;
 	/* offset in TRBs */
 	segment_offset = trb - seg->trbs;
-	if (segment_offset > TRBS_PER_SEGMENT)
+	if (segment_offset >= TRBS_PER_SEGMENT)
 		return 0;
 	return seg->dma + (segment_offset * sizeof(*trb));
 }
@@ -1546,6 +1546,9 @@ static void handle_port_status(struct xhci_hcd *xhci,
 		usb_hcd_resume_root_hub(hcd);
 	}
 
+	if (hcd->speed == HCD_USB3 && (temp & PORT_PLS_MASK) == XDEV_INACTIVE)
+		bus_state->port_remote_wakeup &= ~(1 << faked_port_index);
+
 	if ((temp & PORT_PLC) && (temp & PORT_PLS_MASK) == XDEV_RESUME) {
 		xhci_dbg(xhci, "port resume event for port %d\n", port_id);
 
diff --git a/kernel/drivers/usb/host/xhci.c b/kernel/drivers/usb/host/xhci.c
index 36bf089b7..c502c2277 100644
--- a/kernel/drivers/usb/host/xhci.c
+++ b/kernel/drivers/usb/host/xhci.c
@@ -3453,6 +3453,9 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev)
 			return -EINVAL;
 	}
 
+	if (virt_dev->tt_info)
+		old_active_eps = virt_dev->tt_info->active_eps;
+
 	if (virt_dev->udev != udev) {
 		/* If the virt_dev and the udev does not match, this virt_dev
 		 * may belong to another udev.
diff --git a/kernel/drivers/usb/host/xhci.h b/kernel/drivers/usb/host/xhci.h
index 6977f8491..0f26dd269 100644
--- a/kernel/drivers/usb/host/xhci.h
+++ b/kernel/drivers/usb/host/xhci.h
@@ -285,6 +285,7 @@ struct xhci_op_regs {
 #define XDEV_U0		(0x0 << 5)
 #define XDEV_U2		(0x2 << 5)
 #define XDEV_U3		(0x3 << 5)
+#define XDEV_INACTIVE	(0x6 << 5)
 #define XDEV_RESUME	(0xf << 5)
 /* true: port has power (see HCC_PPC) */
 #define PORT_POWER	(1 << 9)