summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/usb/core
diff options
context:
space:
mode:
authorJosé Pekkarinen <jose.pekkarinen@nokia.com>2016-04-11 10:41:07 +0300
committerJosé Pekkarinen <jose.pekkarinen@nokia.com>2016-04-13 08:17:18 +0300
commite09b41010ba33a20a87472ee821fa407a5b8da36 (patch)
treed10dc367189862e7ca5c592f033dc3726e1df4e3 /kernel/drivers/usb/core
parentf93b97fd65072de626c074dbe099a1fff05ce060 (diff)
These changes are the raw update to linux-4.4.6-rt14. Kernel sources
are taken from kernel.org, and rt patch from the rt wiki download page. During the rebasing, the following patch collided: Force tick interrupt and get rid of softirq magic(I70131fb85). Collisions have been removed because its logic was found on the source already. Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769 Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>
Diffstat (limited to 'kernel/drivers/usb/core')
-rw-r--r--kernel/drivers/usb/core/Kconfig23
-rw-r--r--kernel/drivers/usb/core/buffer.c3
-rw-r--r--kernel/drivers/usb/core/config.c12
-rw-r--r--kernel/drivers/usb/core/devio.c19
-rw-r--r--kernel/drivers/usb/core/driver.c15
-rw-r--r--kernel/drivers/usb/core/endpoint.c2
-rw-r--r--kernel/drivers/usb/core/hcd.c132
-rw-r--r--kernel/drivers/usb/core/hub.c276
-rw-r--r--kernel/drivers/usb/core/message.c41
-rw-r--r--kernel/drivers/usb/core/otg_whitelist.h2
-rw-r--r--kernel/drivers/usb/core/port.c4
-rw-r--r--kernel/drivers/usb/core/quirks.c22
-rw-r--r--kernel/drivers/usb/core/sysfs.c88
-rw-r--r--kernel/drivers/usb/core/urb.c3
-rw-r--r--kernel/drivers/usb/core/usb.c2
-rw-r--r--kernel/drivers/usb/core/usb.h2
16 files changed, 483 insertions, 163 deletions
diff --git a/kernel/drivers/usb/core/Kconfig b/kernel/drivers/usb/core/Kconfig
index cc0ced08b..dd2801087 100644
--- a/kernel/drivers/usb/core/Kconfig
+++ b/kernel/drivers/usb/core/Kconfig
@@ -77,10 +77,29 @@ config USB_OTG_BLACKLIST_HUB
config USB_OTG_FSM
tristate "USB 2.0 OTG FSM implementation"
- depends on USB
- select USB_OTG
+ depends on USB && USB_OTG
select USB_PHY
help
Implements OTG Finite State Machine as specified in On-The-Go
and Embedded Host Supplement to the USB Revision 2.0 Specification.
+config USB_ULPI_BUS
+ tristate "USB ULPI PHY interface support"
+ depends on USB_SUPPORT
+ help
+ UTMI+ Low Pin Interface (ULPI) is specification for a commonly used
+ USB 2.0 PHY interface. The ULPI specification defines a standard set
+ of registers that can be used to detect the vendor and product which
+ allows ULPI to be handled as a bus. This module is the driver for that
+ bus.
+
+ The ULPI interfaces (the buses) are registered by the drivers for USB
+ controllers which support ULPI register access and have ULPI PHY
+ attached to them. The ULPI PHY drivers themselves are normal PHY
+ drivers.
+
+ ULPI PHYs provide often functions such as ADP sensing/probing (OTG
+ protocol) and USB charger detection.
+
+ To compile this driver as a module, choose M here: the module will
+ be called ulpi.
diff --git a/kernel/drivers/usb/core/buffer.c b/kernel/drivers/usb/core/buffer.c
index 506b969ea..89f2e7765 100644
--- a/kernel/drivers/usb/core/buffer.c
+++ b/kernel/drivers/usb/core/buffer.c
@@ -70,7 +70,7 @@ int hcd_buffer_create(struct usb_hcd *hcd)
size = pool_max[i];
if (!size)
continue;
- snprintf(name, sizeof name, "buffer-%d", size);
+ snprintf(name, sizeof(name), "buffer-%d", size);
hcd->pool[i] = dma_pool_create(name, hcd->self.controller,
size, size, 0);
if (!hcd->pool[i]) {
@@ -95,6 +95,7 @@ void hcd_buffer_destroy(struct usb_hcd *hcd)
for (i = 0; i < HCD_BUFFER_POOLS; i++) {
struct dma_pool *pool = hcd->pool[i];
+
if (pool) {
dma_pool_destroy(pool);
hcd->pool[i] = NULL;
diff --git a/kernel/drivers/usb/core/config.c b/kernel/drivers/usb/core/config.c
index b2a540b43..5050760f5 100644
--- a/kernel/drivers/usb/core/config.c
+++ b/kernel/drivers/usb/core/config.c
@@ -112,16 +112,18 @@ static void usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno,
cfgno, inum, asnum, ep->desc.bEndpointAddress);
ep->ss_ep_comp.bmAttributes = 16;
} else if (usb_endpoint_xfer_isoc(&ep->desc) &&
- desc->bmAttributes > 2) {
+ USB_SS_MULT(desc->bmAttributes) > 3) {
dev_warn(ddev, "Isoc endpoint has Mult of %d in "
"config %d interface %d altsetting %d ep %d: "
- "setting to 3\n", desc->bmAttributes + 1,
+ "setting to 3\n",
+ USB_SS_MULT(desc->bmAttributes),
cfgno, inum, asnum, ep->desc.bEndpointAddress);
ep->ss_ep_comp.bmAttributes = 2;
}
if (usb_endpoint_xfer_isoc(&ep->desc))
- max_tx = (desc->bMaxBurst + 1) * (desc->bmAttributes + 1) *
+ max_tx = (desc->bMaxBurst + 1) *
+ (USB_SS_MULT(desc->bmAttributes)) *
usb_endpoint_maxp(&ep->desc);
else if (usb_endpoint_xfer_int(&ep->desc))
max_tx = usb_endpoint_maxp(&ep->desc) *
@@ -852,6 +854,10 @@ int usb_get_bos_descriptor(struct usb_device *dev)
dev->bos->ss_cap =
(struct usb_ss_cap_descriptor *)buffer;
break;
+ case USB_SSP_CAP_TYPE:
+ dev->bos->ssp_cap =
+ (struct usb_ssp_cap_descriptor *)buffer;
+ break;
case CONTAINER_ID_TYPE:
dev->bos->ss_id =
(struct usb_ss_container_id_descriptor *)buffer;
diff --git a/kernel/drivers/usb/core/devio.c b/kernel/drivers/usb/core/devio.c
index 986abde07..38ae877c4 100644
--- a/kernel/drivers/usb/core/devio.c
+++ b/kernel/drivers/usb/core/devio.c
@@ -103,7 +103,7 @@ MODULE_PARM_DESC(usbfs_snoop, "true to log all usbfs traffic");
#define snoop(dev, format, arg...) \
do { \
if (usbfs_snoop) \
- dev_info(dev , format , ## arg); \
+ dev_info(dev, format, ## arg); \
} while (0)
enum snoop_when {
@@ -1082,7 +1082,8 @@ static int proc_bulk(struct usb_dev_state *ps, void __user *arg)
ret = usbfs_increase_memory_usage(len1 + sizeof(struct urb));
if (ret)
return ret;
- if (!(tbuf = kmalloc(len1, GFP_KERNEL))) {
+ tbuf = kmalloc(len1, GFP_KERNEL);
+ if (!tbuf) {
ret = -ENOMEM;
goto done;
}
@@ -1224,7 +1225,8 @@ static int proc_setintf(struct usb_dev_state *ps, void __user *arg)
if (copy_from_user(&setintf, arg, sizeof(setintf)))
return -EFAULT;
- if ((ret = checkintf(ps, setintf.interface)))
+ ret = checkintf(ps, setintf.interface);
+ if (ret)
return ret;
destroy_async_on_interface(ps, setintf.interface);
@@ -1319,7 +1321,7 @@ static int proc_do_submiturb(struct usb_dev_state *ps, struct usbdevfs_urb *uurb
is_in = (uurb->endpoint & USB_ENDPOINT_DIR_MASK) != 0;
u = 0;
- switch(uurb->type) {
+ switch (uurb->type) {
case USBDEVFS_URB_TYPE_CONTROL:
if (!usb_endpoint_xfer_control(&ep->desc))
return -EINVAL;
@@ -1393,7 +1395,8 @@ static int proc_do_submiturb(struct usb_dev_state *ps, struct usbdevfs_urb *uurb
number_of_packets = uurb->number_of_packets;
isofrmlen = sizeof(struct usbdevfs_iso_packet_desc) *
number_of_packets;
- if (!(isopkt = kmalloc(isofrmlen, GFP_KERNEL)))
+ isopkt = kmalloc(isofrmlen, GFP_KERNEL);
+ if (!isopkt)
return -ENOMEM;
if (copy_from_user(isopkt, iso_frame_desc, isofrmlen)) {
ret = -EFAULT;
@@ -1904,7 +1907,8 @@ static int proc_releaseinterface(struct usb_dev_state *ps, void __user *arg)
if (get_user(ifnum, (unsigned int __user *)arg))
return -EFAULT;
- if ((ret = releaseintf(ps, ifnum)) < 0)
+ ret = releaseintf(ps, ifnum);
+ if (ret < 0)
return ret;
destroy_async_on_interface (ps, ifnum);
return 0;
@@ -1919,7 +1923,8 @@ static int proc_ioctl(struct usb_dev_state *ps, struct usbdevfs_ioctl *ctl)
struct usb_driver *driver = NULL;
/* alloc buffer */
- if ((size = _IOC_SIZE(ctl->ioctl_code)) > 0) {
+ size = _IOC_SIZE(ctl->ioctl_code);
+ if (size > 0) {
buf = kmalloc(size, GFP_KERNEL);
if (buf == NULL)
return -ENOMEM;
diff --git a/kernel/drivers/usb/core/driver.c b/kernel/drivers/usb/core/driver.c
index 818369aff..56593a9a8 100644
--- a/kernel/drivers/usb/core/driver.c
+++ b/kernel/drivers/usb/core/driver.c
@@ -160,6 +160,7 @@ static ssize_t remove_id_store(struct device_driver *driver, const char *buf,
spin_lock(&usb_driver->dynids.lock);
list_for_each_entry_safe(dynid, n, &usb_driver->dynids.list, node) {
struct usb_device_id *id = &dynid->id;
+
if ((id->idVendor == idVendor) &&
(id->idProduct == idProduct)) {
list_del(&dynid->node);
@@ -295,6 +296,10 @@ static int usb_probe_interface(struct device *dev)
if (udev->authorized == 0) {
dev_err(&intf->dev, "Device is not authorized for usage\n");
return error;
+ } else if (intf->authorized == 0) {
+ dev_err(&intf->dev, "Interface %d is not authorized for usage\n",
+ intf->altsetting->desc.bInterfaceNumber);
+ return error;
}
id = usb_match_dynamic_id(intf, driver);
@@ -416,12 +421,10 @@ static int usb_unbind_interface(struct device *dev)
if (ep->streams == 0)
continue;
if (j == 0) {
- eps = kmalloc(USB_MAXENDPOINTS * sizeof(void *),
+ eps = kmalloc_array(USB_MAXENDPOINTS, sizeof(void *),
GFP_KERNEL);
- if (!eps) {
- dev_warn(dev, "oom, leaking streams\n");
+ if (!eps)
break;
- }
}
eps[j++] = ep;
}
@@ -507,6 +510,10 @@ int usb_driver_claim_interface(struct usb_driver *driver,
if (dev->driver)
return -EBUSY;
+ /* reject claim if interface is not authorized */
+ if (!iface->authorized)
+ return -ENODEV;
+
udev = interface_to_usbdev(iface);
dev->driver = &driver->drvwrap.driver;
diff --git a/kernel/drivers/usb/core/endpoint.c b/kernel/drivers/usb/core/endpoint.c
index 39a24021f..101983b7e 100644
--- a/kernel/drivers/usb/core/endpoint.c
+++ b/kernel/drivers/usb/core/endpoint.c
@@ -51,7 +51,7 @@ static ssize_t wMaxPacketSize_show(struct device *dev,
{
struct ep_device *ep = to_ep_device(dev);
return sprintf(buf, "%04x\n",
- usb_endpoint_maxp(ep->desc) & 0x07ff);
+ usb_endpoint_maxp(ep->desc) & 0x07ff);
}
static DEVICE_ATTR_RO(wMaxPacketSize);
diff --git a/kernel/drivers/usb/core/hcd.c b/kernel/drivers/usb/core/hcd.c
index ab14f8471..a8f2f5bf2 100644
--- a/kernel/drivers/usb/core/hcd.c
+++ b/kernel/drivers/usb/core/hcd.c
@@ -131,7 +131,7 @@ static inline int is_root_hub(struct usb_device *udev)
/* usb 3.0 root hub device descriptor */
static const u8 usb3_rh_dev_descriptor[18] = {
0x12, /* __u8 bLength; */
- 0x01, /* __u8 bDescriptorType; Device */
+ USB_DT_DEVICE, /* __u8 bDescriptorType; Device */
0x00, 0x03, /* __le16 bcdUSB; v3.0 */
0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
@@ -152,7 +152,7 @@ static const u8 usb3_rh_dev_descriptor[18] = {
/* usb 2.5 (wireless USB 1.0) root hub device descriptor */
static const u8 usb25_rh_dev_descriptor[18] = {
0x12, /* __u8 bLength; */
- 0x01, /* __u8 bDescriptorType; Device */
+ USB_DT_DEVICE, /* __u8 bDescriptorType; Device */
0x50, 0x02, /* __le16 bcdUSB; v2.5 */
0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
@@ -173,7 +173,7 @@ static const u8 usb25_rh_dev_descriptor[18] = {
/* usb 2.0 root hub device descriptor */
static const u8 usb2_rh_dev_descriptor[18] = {
0x12, /* __u8 bLength; */
- 0x01, /* __u8 bDescriptorType; Device */
+ USB_DT_DEVICE, /* __u8 bDescriptorType; Device */
0x00, 0x02, /* __le16 bcdUSB; v2.0 */
0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
@@ -196,7 +196,7 @@ static const u8 usb2_rh_dev_descriptor[18] = {
/* usb 1.1 root hub device descriptor */
static const u8 usb11_rh_dev_descriptor[18] = {
0x12, /* __u8 bLength; */
- 0x01, /* __u8 bDescriptorType; Device */
+ USB_DT_DEVICE, /* __u8 bDescriptorType; Device */
0x10, 0x01, /* __le16 bcdUSB; v1.1 */
0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
@@ -223,7 +223,7 @@ static const u8 fs_rh_config_descriptor[] = {
/* one configuration */
0x09, /* __u8 bLength; */
- 0x02, /* __u8 bDescriptorType; Configuration */
+ USB_DT_CONFIG, /* __u8 bDescriptorType; Configuration */
0x19, 0x00, /* __le16 wTotalLength; */
0x01, /* __u8 bNumInterfaces; (1) */
0x01, /* __u8 bConfigurationValue; */
@@ -248,7 +248,7 @@ static const u8 fs_rh_config_descriptor[] = {
/* one interface */
0x09, /* __u8 if_bLength; */
- 0x04, /* __u8 if_bDescriptorType; Interface */
+ USB_DT_INTERFACE, /* __u8 if_bDescriptorType; Interface */
0x00, /* __u8 if_bInterfaceNumber; */
0x00, /* __u8 if_bAlternateSetting; */
0x01, /* __u8 if_bNumEndpoints; */
@@ -259,7 +259,7 @@ static const u8 fs_rh_config_descriptor[] = {
/* one endpoint (status change endpoint) */
0x07, /* __u8 ep_bLength; */
- 0x05, /* __u8 ep_bDescriptorType; Endpoint */
+ USB_DT_ENDPOINT, /* __u8 ep_bDescriptorType; Endpoint */
0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
0x03, /* __u8 ep_bmAttributes; Interrupt */
0x02, 0x00, /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8) */
@@ -270,7 +270,7 @@ static const u8 hs_rh_config_descriptor[] = {
/* one configuration */
0x09, /* __u8 bLength; */
- 0x02, /* __u8 bDescriptorType; Configuration */
+ USB_DT_CONFIG, /* __u8 bDescriptorType; Configuration */
0x19, 0x00, /* __le16 wTotalLength; */
0x01, /* __u8 bNumInterfaces; (1) */
0x01, /* __u8 bConfigurationValue; */
@@ -295,7 +295,7 @@ static const u8 hs_rh_config_descriptor[] = {
/* one interface */
0x09, /* __u8 if_bLength; */
- 0x04, /* __u8 if_bDescriptorType; Interface */
+ USB_DT_INTERFACE, /* __u8 if_bDescriptorType; Interface */
0x00, /* __u8 if_bInterfaceNumber; */
0x00, /* __u8 if_bAlternateSetting; */
0x01, /* __u8 if_bNumEndpoints; */
@@ -306,7 +306,7 @@ static const u8 hs_rh_config_descriptor[] = {
/* one endpoint (status change endpoint) */
0x07, /* __u8 ep_bLength; */
- 0x05, /* __u8 ep_bDescriptorType; Endpoint */
+ USB_DT_ENDPOINT, /* __u8 ep_bDescriptorType; Endpoint */
0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
0x03, /* __u8 ep_bmAttributes; Interrupt */
/* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8)
@@ -318,7 +318,7 @@ static const u8 hs_rh_config_descriptor[] = {
static const u8 ss_rh_config_descriptor[] = {
/* one configuration */
0x09, /* __u8 bLength; */
- 0x02, /* __u8 bDescriptorType; Configuration */
+ USB_DT_CONFIG, /* __u8 bDescriptorType; Configuration */
0x1f, 0x00, /* __le16 wTotalLength; */
0x01, /* __u8 bNumInterfaces; (1) */
0x01, /* __u8 bConfigurationValue; */
@@ -332,7 +332,7 @@ static const u8 ss_rh_config_descriptor[] = {
/* one interface */
0x09, /* __u8 if_bLength; */
- 0x04, /* __u8 if_bDescriptorType; Interface */
+ USB_DT_INTERFACE, /* __u8 if_bDescriptorType; Interface */
0x00, /* __u8 if_bInterfaceNumber; */
0x00, /* __u8 if_bAlternateSetting; */
0x01, /* __u8 if_bNumEndpoints; */
@@ -343,7 +343,7 @@ static const u8 ss_rh_config_descriptor[] = {
/* one endpoint (status change endpoint) */
0x07, /* __u8 ep_bLength; */
- 0x05, /* __u8 ep_bDescriptorType; Endpoint */
+ USB_DT_ENDPOINT, /* __u8 ep_bDescriptorType; Endpoint */
0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
0x03, /* __u8 ep_bmAttributes; Interrupt */
/* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8)
@@ -353,7 +353,8 @@ static const u8 ss_rh_config_descriptor[] = {
/* one SuperSpeed endpoint companion descriptor */
0x06, /* __u8 ss_bLength */
- 0x30, /* __u8 ss_bDescriptorType; SuperSpeed EP Companion */
+ USB_DT_SS_ENDPOINT_COMP, /* __u8 ss_bDescriptorType; SuperSpeed EP */
+ /* Companion */
0x00, /* __u8 ss_bMaxBurst; allows 1 TX between ACKs */
0x00, /* __u8 ss_bmAttributes; 1 packet per service interval */
0x02, 0x00 /* __le16 ss_wBytesPerInterval; 15 bits for max 15 ports */
@@ -555,6 +556,7 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
switch (wValue & 0xff00) {
case USB_DT_DEVICE << 8:
switch (hcd->speed) {
+ case HCD_USB31:
case HCD_USB3:
bufp = usb3_rh_dev_descriptor;
break;
@@ -576,6 +578,7 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
break;
case USB_DT_CONFIG << 8:
switch (hcd->speed) {
+ case HCD_USB31:
case HCD_USB3:
bufp = ss_rh_config_descriptor;
len = sizeof ss_rh_config_descriptor;
@@ -854,10 +857,10 @@ static ssize_t authorized_default_show(struct device *dev,
{
struct usb_device *rh_usb_dev = to_usb_device(dev);
struct usb_bus *usb_bus = rh_usb_dev->bus;
- struct usb_hcd *usb_hcd;
+ struct usb_hcd *hcd;
- usb_hcd = bus_to_hcd(usb_bus);
- return snprintf(buf, PAGE_SIZE, "%u\n", usb_hcd->authorized_default);
+ hcd = bus_to_hcd(usb_bus);
+ return snprintf(buf, PAGE_SIZE, "%u\n", !!HCD_DEV_AUTHORIZED(hcd));
}
static ssize_t authorized_default_store(struct device *dev,
@@ -868,12 +871,16 @@ static ssize_t authorized_default_store(struct device *dev,
unsigned val;
struct usb_device *rh_usb_dev = to_usb_device(dev);
struct usb_bus *usb_bus = rh_usb_dev->bus;
- struct usb_hcd *usb_hcd;
+ struct usb_hcd *hcd;
- usb_hcd = bus_to_hcd(usb_bus);
+ hcd = bus_to_hcd(usb_bus);
result = sscanf(buf, "%u\n", &val);
if (result == 1) {
- usb_hcd->authorized_default = val ? 1 : 0;
+ if (val)
+ set_bit(HCD_FLAG_DEV_AUTHORIZED, &hcd->flags);
+ else
+ clear_bit(HCD_FLAG_DEV_AUTHORIZED, &hcd->flags);
+
result = size;
} else {
result = -EINVAL;
@@ -882,9 +889,53 @@ static ssize_t authorized_default_store(struct device *dev,
}
static DEVICE_ATTR_RW(authorized_default);
+/*
+ * interface_authorized_default_show - show default authorization status
+ * for USB interfaces
+ *
+ * note: interface_authorized_default is the default value
+ * for initializing the authorized attribute of interfaces
+ */
+static ssize_t interface_authorized_default_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct usb_device *usb_dev = to_usb_device(dev);
+ struct usb_hcd *hcd = bus_to_hcd(usb_dev->bus);
+
+ return sprintf(buf, "%u\n", !!HCD_INTF_AUTHORIZED(hcd));
+}
+
+/*
+ * interface_authorized_default_store - store default authorization status
+ * for USB interfaces
+ *
+ * note: interface_authorized_default is the default value
+ * for initializing the authorized attribute of interfaces
+ */
+static ssize_t interface_authorized_default_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct usb_device *usb_dev = to_usb_device(dev);
+ struct usb_hcd *hcd = bus_to_hcd(usb_dev->bus);
+ int rc = count;
+ bool val;
+
+ if (strtobool(buf, &val) != 0)
+ return -EINVAL;
+
+ if (val)
+ set_bit(HCD_FLAG_INTF_AUTHORIZED, &hcd->flags);
+ else
+ clear_bit(HCD_FLAG_INTF_AUTHORIZED, &hcd->flags);
+
+ return rc;
+}
+static DEVICE_ATTR_RW(interface_authorized_default);
+
/* Group all the USB bus attributes */
static struct attribute *usb_bus_attrs[] = {
&dev_attr_authorized_default.attr,
+ &dev_attr_interface_authorized_default.attr,
NULL,
};
@@ -2676,25 +2727,38 @@ int usb_add_hcd(struct usb_hcd *hcd,
dev_info(hcd->self.controller, "%s\n", hcd->product_desc);
/* Keep old behaviour if authorized_default is not in [0, 1]. */
- if (authorized_default < 0 || authorized_default > 1)
- hcd->authorized_default = hcd->wireless ? 0 : 1;
- else
- hcd->authorized_default = authorized_default;
+ if (authorized_default < 0 || authorized_default > 1) {
+ if (hcd->wireless)
+ clear_bit(HCD_FLAG_DEV_AUTHORIZED, &hcd->flags);
+ else
+ set_bit(HCD_FLAG_DEV_AUTHORIZED, &hcd->flags);
+ } else {
+ if (authorized_default)
+ set_bit(HCD_FLAG_DEV_AUTHORIZED, &hcd->flags);
+ else
+ clear_bit(HCD_FLAG_DEV_AUTHORIZED, &hcd->flags);
+ }
set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+ /* per default all interfaces are authorized */
+ set_bit(HCD_FLAG_INTF_AUTHORIZED, &hcd->flags);
+
/* HC is in reset state, but accessible. Now do the one-time init,
* bottom up so that hcds can customize the root hubs before hub_wq
* starts talking to them. (Note, bus id is assigned early too.)
*/
- if ((retval = hcd_buffer_create(hcd)) != 0) {
+ retval = hcd_buffer_create(hcd);
+ if (retval != 0) {
dev_dbg(hcd->self.controller, "pool alloc failed\n");
goto err_create_buf;
}
- if ((retval = usb_register_bus(&hcd->self)) < 0)
+ retval = usb_register_bus(&hcd->self);
+ if (retval < 0)
goto err_register_bus;
- if ((rhdev = usb_alloc_dev(NULL, &hcd->self, 0)) == NULL) {
+ rhdev = usb_alloc_dev(NULL, &hcd->self, 0);
+ if (rhdev == NULL) {
dev_err(hcd->self.controller, "unable to allocate root hub\n");
retval = -ENOMEM;
goto err_allocate_root_hub;
@@ -2714,6 +2778,7 @@ int usb_add_hcd(struct usb_hcd *hcd,
rhdev->speed = USB_SPEED_WIRELESS;
break;
case HCD_USB3:
+ case HCD_USB31:
rhdev->speed = USB_SPEED_SUPER;
break;
default:
@@ -2736,9 +2801,13 @@ int usb_add_hcd(struct usb_hcd *hcd,
/* "reset" is misnamed; its role is now one-time init. the controller
* should already have been reset (and boot firmware kicked off etc).
*/
- if (hcd->driver->reset && (retval = hcd->driver->reset(hcd)) < 0) {
- dev_err(hcd->self.controller, "can't setup: %d\n", retval);
- goto err_hcd_driver_setup;
+ if (hcd->driver->reset) {
+ retval = hcd->driver->reset(hcd);
+ if (retval < 0) {
+ dev_err(hcd->self.controller, "can't setup: %d\n",
+ retval);
+ goto err_hcd_driver_setup;
+ }
}
hcd->rh_pollable = 1;
@@ -2768,7 +2837,8 @@ int usb_add_hcd(struct usb_hcd *hcd,
}
/* starting here, usbcore will pay attention to this root hub */
- if ((retval = register_root_hub(hcd)) != 0)
+ retval = register_root_hub(hcd);
+ if (retval != 0)
goto err_register_root_hub;
retval = sysfs_create_group(&rhdev->dev.kobj, &usb_bus_attr_group);
diff --git a/kernel/drivers/usb/core/hub.c b/kernel/drivers/usb/core/hub.c
index 1e9a8c9aa..1560f3f3e 100644
--- a/kernel/drivers/usb/core/hub.c
+++ b/kernel/drivers/usb/core/hub.c
@@ -50,8 +50,8 @@ DEFINE_MUTEX(usb_port_peer_mutex);
/* cycle leds on hubs that aren't blinking for attention */
static bool blinkenlights = 0;
-module_param (blinkenlights, bool, S_IRUGO);
-MODULE_PARM_DESC (blinkenlights, "true to cycle leds on hubs");
+module_param(blinkenlights, bool, S_IRUGO);
+MODULE_PARM_DESC(blinkenlights, "true to cycle leds on hubs");
/*
* Device SATA8000 FW1.0 from DATAST0R Technology Corp requires about
@@ -124,10 +124,14 @@ struct usb_hub *usb_hub_to_struct_hub(struct usb_device *hdev)
int usb_device_supports_lpm(struct usb_device *udev)
{
+ /* Some devices have trouble with LPM */
+ if (udev->quirks & USB_QUIRK_NO_LPM)
+ return 0;
+
/* USB 2.1 (and greater) devices indicate LPM support through
* their USB 2.0 Extended Capabilities BOS descriptor.
*/
- if (udev->speed == USB_SPEED_HIGH) {
+ if (udev->speed == USB_SPEED_HIGH || udev->speed == USB_SPEED_FULL) {
if (udev->bos->ext_cap &&
(USB_LPM_SUPPORT &
le32_to_cpu(udev->bos->ext_cap->bmAttributes)))
@@ -439,7 +443,7 @@ static void set_port_led(struct usb_hub *hub, int port1, int selector)
#define LED_CYCLE_PERIOD ((2*HZ)/3)
-static void led_work (struct work_struct *work)
+static void led_work(struct work_struct *work)
{
struct usb_hub *hub =
container_of(work, struct usb_hub, leds.work);
@@ -646,7 +650,7 @@ static void hub_irq(struct urb *urb)
default: /* presumably an error */
/* Cause a hub reset after 10 consecutive errors */
- dev_dbg (hub->intfdev, "transfer --> %d\n", status);
+ dev_dbg(hub->intfdev, "transfer --> %d\n", status);
if ((++hub->nerrors < 10) || hub->error)
goto resubmit;
hub->error = status;
@@ -671,14 +675,14 @@ resubmit:
if (hub->quiescing)
return;
- if ((status = usb_submit_urb (hub->urb, GFP_ATOMIC)) != 0
- && status != -ENODEV && status != -EPERM)
- dev_err (hub->intfdev, "resubmit --> %d\n", status);
+ status = usb_submit_urb(hub->urb, GFP_ATOMIC);
+ if (status != 0 && status != -ENODEV && status != -EPERM)
+ dev_err(hub->intfdev, "resubmit --> %d\n", status);
}
/* USB 2.0 spec Section 11.24.2.3 */
static inline int
-hub_clear_tt_buffer (struct usb_device *hdev, u16 devinfo, u16 tt)
+hub_clear_tt_buffer(struct usb_device *hdev, u16 devinfo, u16 tt)
{
/* Need to clear both directions for control ep */
if (((devinfo >> 11) & USB_ENDPOINT_XFERTYPE_MASK) ==
@@ -706,7 +710,7 @@ static void hub_tt_work(struct work_struct *work)
container_of(work, struct usb_hub, tt.clear_work);
unsigned long flags;
- spin_lock_irqsave (&hub->tt.lock, flags);
+ spin_lock_irqsave(&hub->tt.lock, flags);
while (!list_empty(&hub->tt.clear_list)) {
struct list_head *next;
struct usb_tt_clear *clear;
@@ -715,14 +719,14 @@ static void hub_tt_work(struct work_struct *work)
int status;
next = hub->tt.clear_list.next;
- clear = list_entry (next, struct usb_tt_clear, clear_list);
- list_del (&clear->clear_list);
+ clear = list_entry(next, struct usb_tt_clear, clear_list);
+ list_del(&clear->clear_list);
/* drop lock so HCD can concurrently report other TT errors */
- spin_unlock_irqrestore (&hub->tt.lock, flags);
- status = hub_clear_tt_buffer (hdev, clear->devinfo, clear->tt);
+ spin_unlock_irqrestore(&hub->tt.lock, flags);
+ status = hub_clear_tt_buffer(hdev, clear->devinfo, clear->tt);
if (status && status != -ENODEV)
- dev_err (&hdev->dev,
+ dev_err(&hdev->dev,
"clear tt %d (%04x) error %d\n",
clear->tt, clear->devinfo, status);
@@ -734,7 +738,7 @@ static void hub_tt_work(struct work_struct *work)
kfree(clear);
spin_lock_irqsave(&hub->tt.lock, flags);
}
- spin_unlock_irqrestore (&hub->tt.lock, flags);
+ spin_unlock_irqrestore(&hub->tt.lock, flags);
}
/**
@@ -795,8 +799,9 @@ int usb_hub_clear_tt_buffer(struct urb *urb)
* since each TT has "at least two" buffers that can need it (and
* there can be many TTs per hub). even if they're uncommon.
*/
- if ((clear = kmalloc (sizeof *clear, GFP_ATOMIC)) == NULL) {
- dev_err (&udev->dev, "can't save CLEAR_TT_BUFFER state\n");
+ clear = kmalloc(sizeof *clear, GFP_ATOMIC);
+ if (clear == NULL) {
+ dev_err(&udev->dev, "can't save CLEAR_TT_BUFFER state\n");
/* FIXME recover somehow ... RESET_TT? */
return -ENOMEM;
}
@@ -805,10 +810,10 @@ int usb_hub_clear_tt_buffer(struct urb *urb)
clear->tt = tt->multi ? udev->ttport : 1;
clear->devinfo = usb_pipeendpoint (pipe);
clear->devinfo |= udev->devnum << 4;
- clear->devinfo |= usb_pipecontrol (pipe)
+ clear->devinfo |= usb_pipecontrol(pipe)
? (USB_ENDPOINT_XFER_CONTROL << 11)
: (USB_ENDPOINT_XFER_BULK << 11);
- if (usb_pipein (pipe))
+ if (usb_pipein(pipe))
clear->devinfo |= 1 << 15;
/* info for completion callback */
@@ -816,10 +821,10 @@ int usb_hub_clear_tt_buffer(struct urb *urb)
clear->ep = urb->ep;
/* tell keventd to clear state for this TT */
- spin_lock_irqsave (&tt->lock, flags);
- list_add_tail (&clear->clear_list, &tt->clear_list);
+ spin_lock_irqsave(&tt->lock, flags);
+ list_add_tail(&clear->clear_list, &tt->clear_list);
schedule_work(&tt->clear_work);
- spin_unlock_irqrestore (&tt->lock, flags);
+ spin_unlock_irqrestore(&tt->lock, flags);
return 0;
}
EXPORT_SYMBOL_GPL(usb_hub_clear_tt_buffer);
@@ -1030,10 +1035,20 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
unsigned delay;
/* Continue a partial initialization */
- if (type == HUB_INIT2)
- goto init2;
- if (type == HUB_INIT3)
+ if (type == HUB_INIT2 || type == HUB_INIT3) {
+ device_lock(hub->intfdev);
+
+ /* Was the hub disconnected while we were waiting? */
+ if (hub->disconnected) {
+ device_unlock(hub->intfdev);
+ kref_put(&hub->kref, hub_release);
+ return;
+ }
+ if (type == HUB_INIT2)
+ goto init2;
goto init3;
+ }
+ kref_get(&hub->kref);
/* The superspeed hub except for root hub has to use Hub Depth
* value as an offset into the route string to locate the bits
@@ -1069,7 +1084,7 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
* for HUB_POST_RESET, but it's easier not to.
*/
if (type == HUB_INIT) {
- unsigned delay = hub_power_on_good_delay(hub);
+ delay = hub_power_on_good_delay(hub);
hub_power_on(hub, false);
INIT_DELAYED_WORK(&hub->init_work, hub_init_func2);
@@ -1231,6 +1246,7 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
queue_delayed_work(system_power_efficient_wq,
&hub->init_work,
msecs_to_jiffies(delay));
+ device_unlock(hub->intfdev);
return; /* Continues at init3: below */
} else {
msleep(delay);
@@ -1252,6 +1268,11 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
/* Allow autosuspend if it was suppressed */
if (type <= HUB_INIT3)
usb_autopm_put_interface_async(to_usb_interface(hub->intfdev));
+
+ if (type == HUB_INIT2 || type == HUB_INIT3)
+ device_unlock(hub->intfdev);
+
+ kref_put(&hub->kref, hub_release);
}
/* Implement the continuations for the delays above */
@@ -1403,7 +1424,6 @@ static int hub_configure(struct usb_hub *hub,
/* FIXME for USB 3.0, skip for now */
if ((wHubCharacteristics & HUB_CHAR_COMPOUND) &&
!(hub_is_superspeed(hdev))) {
- int i;
char portstr[USB_MAXCHILDREN + 1];
for (i = 0; i < maxchild; i++)
@@ -1441,8 +1461,8 @@ static int hub_configure(struct usb_hub *hub,
break;
}
- spin_lock_init (&hub->tt.lock);
- INIT_LIST_HEAD (&hub->tt.clear_list);
+ spin_lock_init(&hub->tt.lock);
+ INIT_LIST_HEAD(&hub->tt.clear_list);
INIT_WORK(&hub->tt.clear_work, hub_tt_work);
switch (hdev->descriptor.bDeviceProtocol) {
case USB_HUB_PR_FS:
@@ -1631,7 +1651,7 @@ static int hub_configure(struct usb_hub *hub,
return 0;
fail:
- dev_err (hub_dev, "config failed, %s (err %d)\n",
+ dev_err(hub_dev, "config failed, %s (err %d)\n",
message, ret);
/* hub_disconnect() frees urb and descriptor */
return ret;
@@ -1774,7 +1794,7 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id)
if ((desc->desc.bInterfaceSubClass != 0) &&
(desc->desc.bInterfaceSubClass != 1)) {
descriptor_error:
- dev_err (&intf->dev, "bad descriptor, ignoring hub\n");
+ dev_err(&intf->dev, "bad descriptor, ignoring hub\n");
return -EIO;
}
@@ -1789,11 +1809,11 @@ descriptor_error:
goto descriptor_error;
/* We found a hub */
- dev_info (&intf->dev, "USB hub found\n");
+ dev_info(&intf->dev, "USB hub found\n");
hub = kzalloc(sizeof(*hub), GFP_KERNEL);
if (!hub) {
- dev_dbg (&intf->dev, "couldn't kmalloc hub struct\n");
+ dev_dbg(&intf->dev, "couldn't kmalloc hub struct\n");
return -ENOMEM;
}
@@ -1806,7 +1826,7 @@ descriptor_error:
usb_get_intf(intf);
usb_get_dev(hdev);
- usb_set_intfdata (intf, hub);
+ usb_set_intfdata(intf, hub);
intf->needs_remote_wakeup = 1;
pm_suspend_ignore_children(&intf->dev, true);
@@ -1819,14 +1839,14 @@ descriptor_error:
if (hub_configure(hub, endpoint) >= 0)
return 0;
- hub_disconnect (intf);
+ hub_disconnect(intf);
return -ENODEV;
}
static int
hub_ioctl(struct usb_interface *intf, unsigned int code, void *user_data)
{
- struct usb_device *hdev = interface_to_usbdev (intf);
+ struct usb_device *hdev = interface_to_usbdev(intf);
struct usb_hub *hub = usb_hub_to_struct_hub(hdev);
/* assert ifno == 0 (part of hub spec) */
@@ -2142,7 +2162,7 @@ void usb_disconnect(struct usb_device **pdev)
* cleaning up all state associated with the current configuration
* so that the hardware is now fully quiesced.
*/
- dev_dbg (&udev->dev, "unregistering device\n");
+ dev_dbg(&udev->dev, "unregistering device\n");
usb_disable_device(udev, 0);
usb_hcd_synchronize_unlinks(udev);
@@ -2239,39 +2259,49 @@ static int usb_enumerate_device_otg(struct usb_device *udev)
&& udev->parent == udev->bus->root_hub) {
struct usb_otg_descriptor *desc = NULL;
struct usb_bus *bus = udev->bus;
+ unsigned port1 = udev->portnum;
/* descriptor may appear anywhere in config */
- if (__usb_get_extra_descriptor (udev->rawdescriptors[0],
- le16_to_cpu(udev->config[0].desc.wTotalLength),
- USB_DT_OTG, (void **) &desc) == 0) {
- if (desc->bmAttributes & USB_OTG_HNP) {
- unsigned port1 = udev->portnum;
+ err = __usb_get_extra_descriptor(udev->rawdescriptors[0],
+ le16_to_cpu(udev->config[0].desc.wTotalLength),
+ USB_DT_OTG, (void **) &desc);
+ if (err || !(desc->bmAttributes & USB_OTG_HNP))
+ return 0;
- dev_info(&udev->dev,
- "Dual-Role OTG device on %sHNP port\n",
- (port1 == bus->otg_port)
- ? "" : "non-");
-
- /* enable HNP before suspend, it's simpler */
- if (port1 == bus->otg_port)
- bus->b_hnp_enable = 1;
- err = usb_control_msg(udev,
- usb_sndctrlpipe(udev, 0),
- USB_REQ_SET_FEATURE, 0,
- bus->b_hnp_enable
- ? USB_DEVICE_B_HNP_ENABLE
- : USB_DEVICE_A_ALT_HNP_SUPPORT,
- 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
- if (err < 0) {
- /* OTG MESSAGE: report errors here,
- * customize to match your product.
- */
- dev_info(&udev->dev,
- "can't set HNP mode: %d\n",
- err);
- bus->b_hnp_enable = 0;
- }
+ dev_info(&udev->dev, "Dual-Role OTG device on %sHNP port\n",
+ (port1 == bus->otg_port) ? "" : "non-");
+
+ /* enable HNP before suspend, it's simpler */
+ if (port1 == bus->otg_port) {
+ bus->b_hnp_enable = 1;
+ err = usb_control_msg(udev,
+ usb_sndctrlpipe(udev, 0),
+ USB_REQ_SET_FEATURE, 0,
+ USB_DEVICE_B_HNP_ENABLE,
+ 0, NULL, 0,
+ USB_CTRL_SET_TIMEOUT);
+ if (err < 0) {
+ /*
+ * OTG MESSAGE: report errors here,
+ * customize to match your product.
+ */
+ dev_err(&udev->dev, "can't set HNP mode: %d\n",
+ err);
+ bus->b_hnp_enable = 0;
}
+ } else if (desc->bLength == sizeof
+ (struct usb_otg_descriptor)) {
+ /* Set a_alt_hnp_support for legacy otg device */
+ err = usb_control_msg(udev,
+ usb_sndctrlpipe(udev, 0),
+ USB_REQ_SET_FEATURE, 0,
+ USB_DEVICE_A_ALT_HNP_SUPPORT,
+ 0, NULL, 0,
+ USB_CTRL_SET_TIMEOUT);
+ if (err < 0)
+ dev_err(&udev->dev,
+ "set a_alt_hnp_support failed: %d\n",
+ err);
}
}
#endif
@@ -2350,6 +2380,26 @@ static void set_usb_port_removable(struct usb_device *udev)
hub = usb_hub_to_struct_hub(udev->parent);
+ /*
+ * If the platform firmware has provided information about a port,
+ * use that to determine whether it's removable.
+ */
+ switch (hub->ports[udev->portnum - 1]->connect_type) {
+ case USB_PORT_CONNECT_TYPE_HOT_PLUG:
+ udev->removable = USB_DEVICE_REMOVABLE;
+ return;
+ case USB_PORT_CONNECT_TYPE_HARD_WIRED:
+ case USB_PORT_NOT_USED:
+ udev->removable = USB_DEVICE_FIXED;
+ return;
+ default:
+ break;
+ }
+
+ /*
+ * Otherwise, check whether the hub knows whether a port is removable
+ * or not
+ */
wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics);
if (!(wHubCharacteristics & HUB_CHAR_COMPOUND))
@@ -2369,21 +2419,6 @@ static void set_usb_port_removable(struct usb_device *udev)
else
udev->removable = USB_DEVICE_FIXED;
- /*
- * Platform firmware may have populated an alternative value for
- * removable. If the parent port has a known connect_type use
- * that instead.
- */
- switch (hub->ports[udev->portnum - 1]->connect_type) {
- case USB_PORT_CONNECT_TYPE_HOT_PLUG:
- udev->removable = USB_DEVICE_REMOVABLE;
- break;
- case USB_PORT_CONNECT_TYPE_HARD_WIRED:
- udev->removable = USB_DEVICE_FIXED;
- break;
- default: /* use what was set above */
- break;
- }
}
/**
@@ -3520,7 +3555,7 @@ static int check_ports_changed(struct usb_hub *hub)
static int hub_suspend(struct usb_interface *intf, pm_message_t msg)
{
- struct usb_hub *hub = usb_get_intfdata (intf);
+ struct usb_hub *hub = usb_get_intfdata(intf);
struct usb_device *hdev = hub->hdev;
unsigned port1;
int status;
@@ -3860,17 +3895,30 @@ static void usb_enable_link_state(struct usb_hcd *hcd, struct usb_device *udev,
return;
}
- if (usb_set_lpm_timeout(udev, state, timeout))
+ if (usb_set_lpm_timeout(udev, state, timeout)) {
/* If we can't set the parent hub U1/U2 timeout,
* device-initiated LPM won't be allowed either, so let the xHCI
* host know that this link state won't be enabled.
*/
hcd->driver->disable_usb3_lpm_timeout(hcd, udev, state);
+ } else {
+ /* Only a configured device will accept the Set Feature
+ * U1/U2_ENABLE
+ */
+ if (udev->actconfig)
+ usb_set_device_initiated_lpm(udev, state, true);
- /* Only a configured device will accept the Set Feature U1/U2_ENABLE */
- else if (udev->actconfig)
- usb_set_device_initiated_lpm(udev, state, true);
-
+ /* As soon as usb_set_lpm_timeout(timeout) returns 0, the
+ * hub-initiated LPM is enabled. Thus, LPM is enabled no
+ * matter the result of usb_set_device_initiated_lpm().
+ * The only difference is whether device is able to initiate
+ * LPM.
+ */
+ if (state == USB3_LPM_U1)
+ udev->usb3_lpm_u1_enabled = 1;
+ else if (state == USB3_LPM_U2)
+ udev->usb3_lpm_u2_enabled = 1;
+ }
}
/*
@@ -3910,6 +3958,18 @@ static int usb_disable_link_state(struct usb_hcd *hcd, struct usb_device *udev,
dev_warn(&udev->dev, "Could not disable xHCI %s timeout, "
"bus schedule bandwidth may be impacted.\n",
usb3_lpm_names[state]);
+
+ /* As soon as usb_set_lpm_timeout(0) return 0, hub initiated LPM
+ * is disabled. Hub will disallows link to enter U1/U2 as well,
+ * even device is initiating LPM. Hence LPM is disabled if hub LPM
+ * timeout set to 0, no matter device-initiated LPM is disabled or
+ * not.
+ */
+ if (state == USB3_LPM_U1)
+ udev->usb3_lpm_u1_enabled = 0;
+ else if (state == USB3_LPM_U2)
+ udev->usb3_lpm_u2_enabled = 0;
+
return 0;
}
@@ -4212,7 +4272,7 @@ static int hub_enable_device(struct usb_device *udev)
* but it is still necessary to lock the port.
*/
static int
-hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
+hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1,
int retry_counter)
{
struct usb_device *hdev = hub->hdev;
@@ -4493,6 +4553,8 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
goto fail;
}
+ usb_detect_quirks(udev);
+
if (udev->wusb == 0 && le16_to_cpu(udev->descriptor.bcdUSB) >= 0x0201) {
retval = usb_get_bos_descriptor(udev);
if (!retval) {
@@ -4516,7 +4578,7 @@ fail:
}
static void
-check_highspeed (struct usb_hub *hub, struct usb_device *udev, int port1)
+check_highspeed(struct usb_hub *hub, struct usb_device *udev, int port1)
{
struct usb_qualifier_descriptor *qual;
int status;
@@ -4524,11 +4586,11 @@ check_highspeed (struct usb_hub *hub, struct usb_device *udev, int port1)
if (udev->quirks & USB_QUIRK_DEVICE_QUALIFIER)
return;
- qual = kmalloc (sizeof *qual, GFP_KERNEL);
+ qual = kmalloc(sizeof *qual, GFP_KERNEL);
if (qual == NULL)
return;
- status = usb_get_descriptor (udev, USB_DT_DEVICE_QUALIFIER, 0,
+ status = usb_get_descriptor(udev, USB_DT_DEVICE_QUALIFIER, 0,
qual, sizeof *qual);
if (status == sizeof *qual) {
dev_info(&udev->dev, "not running at top speed; "
@@ -4544,7 +4606,7 @@ check_highspeed (struct usb_hub *hub, struct usb_device *udev, int port1)
}
static unsigned
-hub_power_remaining (struct usb_hub *hub)
+hub_power_remaining(struct usb_hub *hub)
{
struct usb_device *hdev = hub->hdev;
int remaining;
@@ -4691,7 +4753,6 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus,
if (status < 0)
goto loop;
- usb_detect_quirks(udev);
if (udev->quirks & USB_QUIRK_DELAY_INIT)
msleep(1000);
@@ -4731,7 +4792,7 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus,
if (le16_to_cpu(udev->descriptor.bcdUSB) >= 0x0200
&& udev->speed == USB_SPEED_FULL
&& highspeed_hubs != 0)
- check_highspeed (hub, udev, port1);
+ check_highspeed(hub, udev, port1);
/* Store the parent's children[] pointer. At this point
* udev becomes globally accessible, although presumably
@@ -5105,7 +5166,7 @@ static const struct usb_device_id hub_id_table[] = {
{ } /* Terminating entry */
};
-MODULE_DEVICE_TABLE (usb, hub_id_table);
+MODULE_DEVICE_TABLE(usb, hub_id_table);
static struct usb_driver hub_driver = {
.name = "hub",
@@ -5217,7 +5278,7 @@ static int descriptors_changed(struct usb_device *udev,
changed = 1;
break;
}
- if (memcmp (buf, udev->rawdescriptors[index], old_length)
+ if (memcmp(buf, udev->rawdescriptors[index], old_length)
!= 0) {
dev_dbg(&udev->dev, "config index %d changed (#%d)\n",
index,
@@ -5307,9 +5368,6 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
if (udev->usb2_hw_lpm_enabled == 1)
usb_set_usb2_hardware_lpm(udev, 0);
- bos = udev->bos;
- udev->bos = NULL;
-
/* Disable LPM and LTM while we reset the device and reinstall the alt
* settings. Device-initiated LPM settings, and system exit latency
* settings are cleared when the device is reset, so we have to set
@@ -5318,15 +5376,17 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
ret = usb_unlocked_disable_lpm(udev);
if (ret) {
dev_err(&udev->dev, "%s Failed to disable LPM\n.", __func__);
- goto re_enumerate;
+ goto re_enumerate_no_bos;
}
ret = usb_disable_ltm(udev);
if (ret) {
dev_err(&udev->dev, "%s Failed to disable LTM\n.",
__func__);
- goto re_enumerate;
+ goto re_enumerate_no_bos;
}
+ bos = udev->bos;
+
for (i = 0; i < SET_CONFIG_TRIES; ++i) {
/* ep0 maxpacket size may change; let the HCD know about it.
@@ -5418,15 +5478,19 @@ done:
usb_set_usb2_hardware_lpm(udev, 1);
usb_unlocked_enable_lpm(udev);
usb_enable_ltm(udev);
- usb_release_bos_descriptor(udev);
- udev->bos = bos;
+ /* release the new BOS descriptor allocated by hub_port_init() */
+ if (udev->bos != bos) {
+ usb_release_bos_descriptor(udev);
+ udev->bos = bos;
+ }
return 0;
re_enumerate:
- /* LPM state doesn't matter when we're about to destroy the device. */
- hub_port_logical_disconnect(parent_hub, port1);
usb_release_bos_descriptor(udev);
udev->bos = bos;
+re_enumerate_no_bos:
+ /* LPM state doesn't matter when we're about to destroy the device. */
+ hub_port_logical_disconnect(parent_hub, port1);
return -ENODEV;
}
diff --git a/kernel/drivers/usb/core/message.c b/kernel/drivers/usb/core/message.c
index f368d2053..8e641b589 100644
--- a/kernel/drivers/usb/core/message.c
+++ b/kernel/drivers/usb/core/message.c
@@ -1387,8 +1387,6 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate)
* new altsetting.
*/
if (manual) {
- int i;
-
for (i = 0; i < alt->desc.bNumEndpoints; i++) {
epaddr = alt->endpoint[i].desc.bEndpointAddress;
pipe = __create_pipe(dev,
@@ -1555,6 +1553,44 @@ static void usb_release_interface(struct device *dev)
kfree(intf);
}
+/*
+ * usb_deauthorize_interface - deauthorize an USB interface
+ *
+ * @intf: USB interface structure
+ */
+void usb_deauthorize_interface(struct usb_interface *intf)
+{
+ struct device *dev = &intf->dev;
+
+ device_lock(dev->parent);
+
+ if (intf->authorized) {
+ device_lock(dev);
+ intf->authorized = 0;
+ device_unlock(dev);
+
+ usb_forced_unbind_intf(intf);
+ }
+
+ device_unlock(dev->parent);
+}
+
+/*
+ * usb_authorize_interface - authorize an USB interface
+ *
+ * @intf: USB interface structure
+ */
+void usb_authorize_interface(struct usb_interface *intf)
+{
+ struct device *dev = &intf->dev;
+
+ if (!intf->authorized) {
+ device_lock(dev);
+ intf->authorized = 1; /* authorize interface */
+ device_unlock(dev);
+ }
+}
+
static int usb_if_uevent(struct device *dev, struct kobj_uevent_env *env)
{
struct usb_device *usb_dev;
@@ -1807,6 +1843,7 @@ free_interfaces:
intfc = cp->intf_cache[i];
intf->altsetting = intfc->altsetting;
intf->num_altsetting = intfc->num_altsetting;
+ intf->authorized = !!HCD_INTF_AUTHORIZED(hcd);
kref_get(&intfc->ref);
alt = usb_altnum_to_altsetting(intf, 0);
diff --git a/kernel/drivers/usb/core/otg_whitelist.h b/kernel/drivers/usb/core/otg_whitelist.h
index a6315abe7..a95b0c989 100644
--- a/kernel/drivers/usb/core/otg_whitelist.h
+++ b/kernel/drivers/usb/core/otg_whitelist.h
@@ -16,7 +16,7 @@
* YOU _SHOULD_ CHANGE THIS LIST TO MATCH YOUR PRODUCT AND ITS TESTING!
*/
-static struct usb_device_id whitelist_table [] = {
+static struct usb_device_id whitelist_table[] = {
/* hubs are optional in OTG, but very handy ... */
{ USB_DEVICE_INFO(USB_CLASS_HUB, 0, 0), },
diff --git a/kernel/drivers/usb/core/port.c b/kernel/drivers/usb/core/port.c
index 210618319..5487fe308 100644
--- a/kernel/drivers/usb/core/port.c
+++ b/kernel/drivers/usb/core/port.c
@@ -206,7 +206,7 @@ static int link_peers(struct usb_port *left, struct usb_port *right)
else
method = "default";
- pr_warn("usb: failed to peer %s and %s by %s (%s:%s) (%s:%s)\n",
+ pr_debug("usb: failed to peer %s and %s by %s (%s:%s) (%s:%s)\n",
dev_name(&left->dev), dev_name(&right->dev), method,
dev_name(&left->dev),
lpeer ? dev_name(&lpeer->dev) : "none",
@@ -265,7 +265,7 @@ static void link_peers_report(struct usb_port *left, struct usb_port *right)
if (rc == 0) {
dev_dbg(&left->dev, "peered to %s\n", dev_name(&right->dev));
} else {
- dev_warn(&left->dev, "failed to peer to %s (%d)\n",
+ dev_dbg(&left->dev, "failed to peer to %s (%d)\n",
dev_name(&right->dev), rc);
pr_warn_once("usb: port power management may be unreliable\n");
usb_port_block_power_off = 1;
diff --git a/kernel/drivers/usb/core/quirks.c b/kernel/drivers/usb/core/quirks.c
index d85abfed8..6dc810bce 100644
--- a/kernel/drivers/usb/core/quirks.c
+++ b/kernel/drivers/usb/core/quirks.c
@@ -54,6 +54,13 @@ static const struct usb_device_id usb_quirk_list[] = {
{ USB_DEVICE(0x046d, 0x082d), .driver_info = USB_QUIRK_DELAY_INIT },
{ USB_DEVICE(0x046d, 0x0843), .driver_info = USB_QUIRK_DELAY_INIT },
+ /* Logitech ConferenceCam CC3000e */
+ { USB_DEVICE(0x046d, 0x0847), .driver_info = USB_QUIRK_DELAY_INIT },
+ { USB_DEVICE(0x046d, 0x0848), .driver_info = USB_QUIRK_DELAY_INIT },
+
+ /* Logitech PTZ Pro Camera */
+ { USB_DEVICE(0x046d, 0x0853), .driver_info = USB_QUIRK_DELAY_INIT },
+
/* Logitech Quickcam Fusion */
{ USB_DEVICE(0x046d, 0x08c1), .driver_info = USB_QUIRK_RESET_RESUME },
@@ -78,6 +85,12 @@ static const struct usb_device_id usb_quirk_list[] = {
/* Philips PSC805 audio device */
{ USB_DEVICE(0x0471, 0x0155), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* Plantronic Audio 655 DSP */
+ { USB_DEVICE(0x047f, 0xc008), .driver_info = USB_QUIRK_RESET_RESUME },
+
+ /* Plantronic Audio 648 USB */
+ { USB_DEVICE(0x047f, 0xc013), .driver_info = USB_QUIRK_RESET_RESUME },
+
/* Artisman Watchdog Dongle */
{ USB_DEVICE(0x04b4, 0x0526), .driver_info =
USB_QUIRK_CONFIG_INTF_STRINGS },
@@ -112,6 +125,9 @@ static const struct usb_device_id usb_quirk_list[] = {
{ USB_DEVICE(0x04f3, 0x016f), .driver_info =
USB_QUIRK_DEVICE_QUALIFIER },
+ { USB_DEVICE(0x04f3, 0x21b8), .driver_info =
+ USB_QUIRK_DEVICE_QUALIFIER },
+
/* Roland SC-8820 */
{ USB_DEVICE(0x0582, 0x0007), .driver_info = USB_QUIRK_RESET_RESUME },
@@ -186,6 +202,12 @@ static const struct usb_device_id usb_quirk_list[] = {
{ USB_DEVICE(0x1a0a, 0x0200), .driver_info =
USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL },
+ /* Blackmagic Design Intensity Shuttle */
+ { USB_DEVICE(0x1edb, 0xbd3b), .driver_info = USB_QUIRK_NO_LPM },
+
+ /* Blackmagic Design UltraStudio SDI */
+ { USB_DEVICE(0x1edb, 0xbd4f), .driver_info = USB_QUIRK_NO_LPM },
+
{ } /* terminating entry must be last */
};
diff --git a/kernel/drivers/usb/core/sysfs.c b/kernel/drivers/usb/core/sysfs.c
index d26973844..65b6e6b84 100644
--- a/kernel/drivers/usb/core/sysfs.c
+++ b/kernel/drivers/usb/core/sysfs.c
@@ -531,6 +531,44 @@ static ssize_t usb2_lpm_besl_store(struct device *dev,
}
static DEVICE_ATTR_RW(usb2_lpm_besl);
+static ssize_t usb3_hardware_lpm_u1_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct usb_device *udev = to_usb_device(dev);
+ const char *p;
+
+ usb_lock_device(udev);
+
+ if (udev->usb3_lpm_u1_enabled)
+ p = "enabled";
+ else
+ p = "disabled";
+
+ usb_unlock_device(udev);
+
+ return sprintf(buf, "%s\n", p);
+}
+static DEVICE_ATTR_RO(usb3_hardware_lpm_u1);
+
+static ssize_t usb3_hardware_lpm_u2_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct usb_device *udev = to_usb_device(dev);
+ const char *p;
+
+ usb_lock_device(udev);
+
+ if (udev->usb3_lpm_u2_enabled)
+ p = "enabled";
+ else
+ p = "disabled";
+
+ usb_unlock_device(udev);
+
+ return sprintf(buf, "%s\n", p);
+}
+static DEVICE_ATTR_RO(usb3_hardware_lpm_u2);
+
static struct attribute *usb2_hardware_lpm_attr[] = {
&dev_attr_usb2_hardware_lpm.attr,
&dev_attr_usb2_lpm_l1_timeout.attr,
@@ -542,6 +580,16 @@ static struct attribute_group usb2_hardware_lpm_attr_group = {
.attrs = usb2_hardware_lpm_attr,
};
+static struct attribute *usb3_hardware_lpm_attr[] = {
+ &dev_attr_usb3_hardware_lpm_u1.attr,
+ &dev_attr_usb3_hardware_lpm_u2.attr,
+ NULL,
+};
+static struct attribute_group usb3_hardware_lpm_attr_group = {
+ .name = power_group_name,
+ .attrs = usb3_hardware_lpm_attr,
+};
+
static struct attribute *power_attrs[] = {
&dev_attr_autosuspend.attr,
&dev_attr_level.attr,
@@ -564,6 +612,10 @@ static int add_power_attributes(struct device *dev)
if (udev->usb2_hw_lpm_capable == 1)
rc = sysfs_merge_group(&dev->kobj,
&usb2_hardware_lpm_attr_group);
+ if (udev->speed == USB_SPEED_SUPER &&
+ udev->lpm_capable == 1)
+ rc = sysfs_merge_group(&dev->kobj,
+ &usb3_hardware_lpm_attr_group);
}
return rc;
@@ -926,6 +978,41 @@ static ssize_t supports_autosuspend_show(struct device *dev,
}
static DEVICE_ATTR_RO(supports_autosuspend);
+/*
+ * interface_authorized_show - show authorization status of an USB interface
+ * 1 is authorized, 0 is deauthorized
+ */
+static ssize_t interface_authorized_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct usb_interface *intf = to_usb_interface(dev);
+
+ return sprintf(buf, "%u\n", intf->authorized);
+}
+
+/*
+ * interface_authorized_store - authorize or deauthorize an USB interface
+ */
+static ssize_t interface_authorized_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct usb_interface *intf = to_usb_interface(dev);
+ bool val;
+
+ if (strtobool(buf, &val) != 0)
+ return -EINVAL;
+
+ if (val)
+ usb_authorize_interface(intf);
+ else
+ usb_deauthorize_interface(intf);
+
+ return count;
+}
+static struct device_attribute dev_attr_interface_authorized =
+ __ATTR(authorized, S_IRUGO | S_IWUSR,
+ interface_authorized_show, interface_authorized_store);
+
static struct attribute *intf_attrs[] = {
&dev_attr_bInterfaceNumber.attr,
&dev_attr_bAlternateSetting.attr,
@@ -935,6 +1022,7 @@ static struct attribute *intf_attrs[] = {
&dev_attr_bInterfaceProtocol.attr,
&dev_attr_modalias.attr,
&dev_attr_supports_autosuspend.attr,
+ &dev_attr_interface_authorized.attr,
NULL,
};
static struct attribute_group intf_attr_grp = {
diff --git a/kernel/drivers/usb/core/urb.c b/kernel/drivers/usb/core/urb.c
index c9e8ee81b..3d274778c 100644
--- a/kernel/drivers/usb/core/urb.c
+++ b/kernel/drivers/usb/core/urb.c
@@ -129,9 +129,8 @@ void usb_anchor_urb(struct urb *urb, struct usb_anchor *anchor)
list_add_tail(&urb->anchor_list, &anchor->urb_list);
urb->anchor = anchor;
- if (unlikely(anchor->poisoned)) {
+ if (unlikely(anchor->poisoned))
atomic_inc(&urb->reject);
- }
spin_unlock_irqrestore(&anchor->lock, flags);
}
diff --git a/kernel/drivers/usb/core/usb.c b/kernel/drivers/usb/core/usb.c
index 8d5b2f411..f8bbd0b6d 100644
--- a/kernel/drivers/usb/core/usb.c
+++ b/kernel/drivers/usb/core/usb.c
@@ -510,7 +510,7 @@ struct usb_device *usb_alloc_dev(struct usb_device *parent,
if (root_hub) /* Root hub always ok [and always wired] */
dev->authorized = 1;
else {
- dev->authorized = usb_hcd->authorized_default;
+ dev->authorized = !!HCD_DEV_AUTHORIZED(usb_hcd);
dev->wusb = usb_bus_is_wusb(bus) ? 1 : 0;
}
return dev;
diff --git a/kernel/drivers/usb/core/usb.h b/kernel/drivers/usb/core/usb.h
index 457255a33..05b5e17ab 100644
--- a/kernel/drivers/usb/core/usb.h
+++ b/kernel/drivers/usb/core/usb.h
@@ -27,6 +27,8 @@ extern void usb_release_interface_cache(struct kref *ref);
extern void usb_disable_device(struct usb_device *dev, int skip_ep0);
extern int usb_deauthorize_device(struct usb_device *);
extern int usb_authorize_device(struct usb_device *);
+extern void usb_deauthorize_interface(struct usb_interface *);
+extern void usb_authorize_interface(struct usb_interface *);
extern void usb_detect_quirks(struct usb_device *udev);
extern void usb_detect_interface_quirks(struct usb_device *udev);
extern int usb_remove_device(struct usb_device *udev);