These changes are the raw update to linux-4.4.6-rt14. Kernel sources

are taken from kernel.org, and rt patch from the rt wiki download page.

During the rebasing, the following patch collided:

Force tick interrupt and get rid of softirq magic(I70131fb85).

Collisions have been removed because its logic was found on the
source already.

Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>

16 files changed, 483 insertions, 163 deletions

diff --git a/kernel/drivers/usb/core/Kconfig b/kernel/drivers/usb/core/Kconfig
index cc0ced08b..dd2801087 100644
--- a/kernel/drivers/usb/core/Kconfig
+++ b/kernel/drivers/usb/core/Kconfig
@@ -77,10 +77,29 @@ config USB_OTG_BLACKLIST_HUB
 
 config USB_OTG_FSM
 	tristate "USB 2.0 OTG FSM implementation"
-	depends on USB
-	select USB_OTG
+	depends on USB && USB_OTG
 	select USB_PHY
 	help
 	  Implements OTG Finite State Machine as specified in On-The-Go
 	  and Embedded Host Supplement to the USB Revision 2.0 Specification.
 
+config USB_ULPI_BUS
+	tristate "USB ULPI PHY interface support"
+	depends on USB_SUPPORT
+	help
+	  UTMI+ Low Pin Interface (ULPI) is specification for a commonly used
+	  USB 2.0 PHY interface. The ULPI specification defines a standard set
+	  of registers that can be used to detect the vendor and product which
+	  allows ULPI to be handled as a bus. This module is the driver for that
+	  bus.
+
+	  The ULPI interfaces (the buses) are registered by the drivers for USB
+	  controllers which support ULPI register access and have ULPI PHY
+	  attached to them. The ULPI PHY drivers themselves are normal PHY
+	  drivers.
+
+	  ULPI PHYs provide often functions such as ADP sensing/probing (OTG
+	  protocol) and USB charger detection.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called ulpi.
diff --git a/kernel/drivers/usb/core/buffer.c b/kernel/drivers/usb/core/buffer.c
index 506b969ea..89f2e7765 100644
--- a/kernel/drivers/usb/core/buffer.c
+++ b/kernel/drivers/usb/core/buffer.c
@@ -70,7 +70,7 @@ int hcd_buffer_create(struct usb_hcd *hcd)
 		size = pool_max[i];
 		if (!size)
 			continue;
-		snprintf(name, sizeof name, "buffer-%d", size);
+		snprintf(name, sizeof(name), "buffer-%d", size);
 		hcd->pool[i] = dma_pool_create(name, hcd->self.controller,
 				size, size, 0);
 		if (!hcd->pool[i]) {
@@ -95,6 +95,7 @@ void hcd_buffer_destroy(struct usb_hcd *hcd)
 
 	for (i = 0; i < HCD_BUFFER_POOLS; i++) {
 		struct dma_pool *pool = hcd->pool[i];
+
 		if (pool) {
 			dma_pool_destroy(pool);
 			hcd->pool[i] = NULL;
diff --git a/kernel/drivers/usb/core/config.c b/kernel/drivers/usb/core/config.c
index b2a540b43..5050760f5 100644
--- a/kernel/drivers/usb/core/config.c
+++ b/kernel/drivers/usb/core/config.c
@@ -112,16 +112,18 @@ static void usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno,
 				cfgno, inum, asnum, ep->desc.bEndpointAddress);
 		ep->ss_ep_comp.bmAttributes = 16;
 	} else if (usb_endpoint_xfer_isoc(&ep->desc) &&
-			desc->bmAttributes > 2) {
+		   USB_SS_MULT(desc->bmAttributes) > 3) {
 		dev_warn(ddev, "Isoc endpoint has Mult of %d in "
 				"config %d interface %d altsetting %d ep %d: "
-				"setting to 3\n", desc->bmAttributes + 1,
+				"setting to 3\n",
+				USB_SS_MULT(desc->bmAttributes),
 				cfgno, inum, asnum, ep->desc.bEndpointAddress);
 		ep->ss_ep_comp.bmAttributes = 2;
 	}
 
 	if (usb_endpoint_xfer_isoc(&ep->desc))
-		max_tx = (desc->bMaxBurst + 1) * (desc->bmAttributes + 1) *
+		max_tx = (desc->bMaxBurst + 1) *
+			(USB_SS_MULT(desc->bmAttributes)) *
 			usb_endpoint_maxp(&ep->desc);
 	else if (usb_endpoint_xfer_int(&ep->desc))
 		max_tx = usb_endpoint_maxp(&ep->desc) *
@@ -852,6 +854,10 @@ int usb_get_bos_descriptor(struct usb_device *dev)
 			dev->bos->ss_cap =
 				(struct usb_ss_cap_descriptor *)buffer;
 			break;
+		case USB_SSP_CAP_TYPE:
+			dev->bos->ssp_cap =
+				(struct usb_ssp_cap_descriptor *)buffer;
+			break;
 		case CONTAINER_ID_TYPE:
 			dev->bos->ss_id =
 				(struct usb_ss_container_id_descriptor *)buffer;
diff --git a/kernel/drivers/usb/core/devio.c b/kernel/drivers/usb/core/devio.c
index 986abde07..38ae877c4 100644
--- a/kernel/drivers/usb/core/devio.c
+++ b/kernel/drivers/usb/core/devio.c
@@ -103,7 +103,7 @@ MODULE_PARM_DESC(usbfs_snoop, "true to log all usbfs traffic");
 #define snoop(dev, format, arg...)				\
 	do {							\
 		if (usbfs_snoop)				\
-			dev_info(dev , format , ## arg);	\
+			dev_info(dev, format, ## arg);		\
 	} while (0)
 
 enum snoop_when {
@@ -1082,7 +1082,8 @@ static int proc_bulk(struct usb_dev_state *ps, void __user *arg)
 	ret = usbfs_increase_memory_usage(len1 + sizeof(struct urb));
 	if (ret)
 		return ret;
-	if (!(tbuf = kmalloc(len1, GFP_KERNEL))) {
+	tbuf = kmalloc(len1, GFP_KERNEL);
+	if (!tbuf) {
 		ret = -ENOMEM;
 		goto done;
 	}
@@ -1224,7 +1225,8 @@ static int proc_setintf(struct usb_dev_state *ps, void __user *arg)
 
 	if (copy_from_user(&setintf, arg, sizeof(setintf)))
 		return -EFAULT;
-	if ((ret = checkintf(ps, setintf.interface)))
+	ret = checkintf(ps, setintf.interface);
+	if (ret)
 		return ret;
 
 	destroy_async_on_interface(ps, setintf.interface);
@@ -1319,7 +1321,7 @@ static int proc_do_submiturb(struct usb_dev_state *ps, struct usbdevfs_urb *uurb
 	is_in = (uurb->endpoint & USB_ENDPOINT_DIR_MASK) != 0;
 
 	u = 0;
-	switch(uurb->type) {
+	switch (uurb->type) {
 	case USBDEVFS_URB_TYPE_CONTROL:
 		if (!usb_endpoint_xfer_control(&ep->desc))
 			return -EINVAL;
@@ -1393,7 +1395,8 @@ static int proc_do_submiturb(struct usb_dev_state *ps, struct usbdevfs_urb *uurb
 		number_of_packets = uurb->number_of_packets;
 		isofrmlen = sizeof(struct usbdevfs_iso_packet_desc) *
 				   number_of_packets;
-		if (!(isopkt = kmalloc(isofrmlen, GFP_KERNEL)))
+		isopkt = kmalloc(isofrmlen, GFP_KERNEL);
+		if (!isopkt)
 			return -ENOMEM;
 		if (copy_from_user(isopkt, iso_frame_desc, isofrmlen)) {
 			ret = -EFAULT;
@@ -1904,7 +1907,8 @@ static int proc_releaseinterface(struct usb_dev_state *ps, void __user *arg)
 
 	if (get_user(ifnum, (unsigned int __user *)arg))
 		return -EFAULT;
-	if ((ret = releaseintf(ps, ifnum)) < 0)
+	ret = releaseintf(ps, ifnum);
+	if (ret < 0)
 		return ret;
 	destroy_async_on_interface (ps, ifnum);
 	return 0;
@@ -1919,7 +1923,8 @@ static int proc_ioctl(struct usb_dev_state *ps, struct usbdevfs_ioctl *ctl)
 	struct usb_driver       *driver = NULL;
 
 	/* alloc buffer */
-	if ((size = _IOC_SIZE(ctl->ioctl_code)) > 0) {
+	size = _IOC_SIZE(ctl->ioctl_code);
+	if (size > 0) {
 		buf = kmalloc(size, GFP_KERNEL);
 		if (buf == NULL)
 			return -ENOMEM;
diff --git a/kernel/drivers/usb/core/driver.c b/kernel/drivers/usb/core/driver.c
index 818369aff..56593a9a8 100644
--- a/kernel/drivers/usb/core/driver.c
+++ b/kernel/drivers/usb/core/driver.c
@@ -160,6 +160,7 @@ static ssize_t remove_id_store(struct device_driver *driver, const char *buf,
 	spin_lock(&usb_driver->dynids.lock);
 	list_for_each_entry_safe(dynid, n, &usb_driver->dynids.list, node) {
 		struct usb_device_id *id = &dynid->id;
+
 		if ((id->idVendor == idVendor) &&
 		    (id->idProduct == idProduct)) {
 			list_del(&dynid->node);
@@ -295,6 +296,10 @@ static int usb_probe_interface(struct device *dev)
 	if (udev->authorized == 0) {
 		dev_err(&intf->dev, "Device is not authorized for usage\n");
 		return error;
+	} else if (intf->authorized == 0) {
+		dev_err(&intf->dev, "Interface %d is not authorized for usage\n",
+				intf->altsetting->desc.bInterfaceNumber);
+		return error;
 	}
 
 	id = usb_match_dynamic_id(intf, driver);
@@ -416,12 +421,10 @@ static int usb_unbind_interface(struct device *dev)
 		if (ep->streams == 0)
 			continue;
 		if (j == 0) {
-			eps = kmalloc(USB_MAXENDPOINTS * sizeof(void *),
+			eps = kmalloc_array(USB_MAXENDPOINTS, sizeof(void *),
 				      GFP_KERNEL);
-			if (!eps) {
-				dev_warn(dev, "oom, leaking streams\n");
+			if (!eps)
 				break;
-			}
 		}
 		eps[j++] = ep;
 	}
@@ -507,6 +510,10 @@ int usb_driver_claim_interface(struct usb_driver *driver,
 	if (dev->driver)
 		return -EBUSY;
 
+	/* reject claim if interface is not authorized */
+	if (!iface->authorized)
+		return -ENODEV;
+
 	udev = interface_to_usbdev(iface);
 
 	dev->driver = &driver->drvwrap.driver;
diff --git a/kernel/drivers/usb/core/endpoint.c b/kernel/drivers/usb/core/endpoint.c
index 39a24021f..101983b7e 100644
--- a/kernel/drivers/usb/core/endpoint.c
+++ b/kernel/drivers/usb/core/endpoint.c
@@ -51,7 +51,7 @@ static ssize_t wMaxPacketSize_show(struct device *dev,
 {
 	struct ep_device *ep = to_ep_device(dev);
 	return sprintf(buf, "%04x\n",
-		        usb_endpoint_maxp(ep->desc) & 0x07ff);
+			usb_endpoint_maxp(ep->desc) & 0x07ff);
 }
 static DEVICE_ATTR_RO(wMaxPacketSize);
 
diff --git a/kernel/drivers/usb/core/hcd.c b/kernel/drivers/usb/core/hcd.c
index ab14f8471..a8f2f5bf2 100644
--- a/kernel/drivers/usb/core/hcd.c
+++ b/kernel/drivers/usb/core/hcd.c
@@ -131,7 +131,7 @@ static inline int is_root_hub(struct usb_device *udev)
 /* usb 3.0 root hub device descriptor */
 static const u8 usb3_rh_dev_descriptor[18] = {
 	0x12,       /*  __u8  bLength; */
-	0x01,       /*  __u8  bDescriptorType; Device */
+	USB_DT_DEVICE, /* __u8 bDescriptorType; Device */
 	0x00, 0x03, /*  __le16 bcdUSB; v3.0 */
 
 	0x09,	    /*  __u8  bDeviceClass; HUB_CLASSCODE */
@@ -152,7 +152,7 @@ static const u8 usb3_rh_dev_descriptor[18] = {
 /* usb 2.5 (wireless USB 1.0) root hub device descriptor */
 static const u8 usb25_rh_dev_descriptor[18] = {
 	0x12,       /*  __u8  bLength; */
-	0x01,       /*  __u8  bDescriptorType; Device */
+	USB_DT_DEVICE, /* __u8 bDescriptorType; Device */
 	0x50, 0x02, /*  __le16 bcdUSB; v2.5 */
 
 	0x09,	    /*  __u8  bDeviceClass; HUB_CLASSCODE */
@@ -173,7 +173,7 @@ static const u8 usb25_rh_dev_descriptor[18] = {
 /* usb 2.0 root hub device descriptor */
 static const u8 usb2_rh_dev_descriptor[18] = {
 	0x12,       /*  __u8  bLength; */
-	0x01,       /*  __u8  bDescriptorType; Device */
+	USB_DT_DEVICE, /* __u8 bDescriptorType; Device */
 	0x00, 0x02, /*  __le16 bcdUSB; v2.0 */
 
 	0x09,	    /*  __u8  bDeviceClass; HUB_CLASSCODE */
@@ -196,7 +196,7 @@ static const u8 usb2_rh_dev_descriptor[18] = {
 /* usb 1.1 root hub device descriptor */
 static const u8 usb11_rh_dev_descriptor[18] = {
 	0x12,       /*  __u8  bLength; */
-	0x01,       /*  __u8  bDescriptorType; Device */
+	USB_DT_DEVICE, /* __u8 bDescriptorType; Device */
 	0x10, 0x01, /*  __le16 bcdUSB; v1.1 */
 
 	0x09,	    /*  __u8  bDeviceClass; HUB_CLASSCODE */
@@ -223,7 +223,7 @@ static const u8 fs_rh_config_descriptor[] = {
 
 	/* one configuration */
 	0x09,       /*  __u8  bLength; */
-	0x02,       /*  __u8  bDescriptorType; Configuration */
+	USB_DT_CONFIG, /* __u8 bDescriptorType; Configuration */
 	0x19, 0x00, /*  __le16 wTotalLength; */
 	0x01,       /*  __u8  bNumInterfaces; (1) */
 	0x01,       /*  __u8  bConfigurationValue; */
@@ -248,7 +248,7 @@ static const u8 fs_rh_config_descriptor[] = {
 
 	/* one interface */
 	0x09,       /*  __u8  if_bLength; */
-	0x04,       /*  __u8  if_bDescriptorType; Interface */
+	USB_DT_INTERFACE,  /* __u8 if_bDescriptorType; Interface */
 	0x00,       /*  __u8  if_bInterfaceNumber; */
 	0x00,       /*  __u8  if_bAlternateSetting; */
 	0x01,       /*  __u8  if_bNumEndpoints; */
@@ -259,7 +259,7 @@ static const u8 fs_rh_config_descriptor[] = {
 
 	/* one endpoint (status change endpoint) */
 	0x07,       /*  __u8  ep_bLength; */
-	0x05,       /*  __u8  ep_bDescriptorType; Endpoint */
+	USB_DT_ENDPOINT, /* __u8 ep_bDescriptorType; Endpoint */
 	0x81,       /*  __u8  ep_bEndpointAddress; IN Endpoint 1 */
 	0x03,       /*  __u8  ep_bmAttributes; Interrupt */
 	0x02, 0x00, /*  __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8) */
@@ -270,7 +270,7 @@ static const u8 hs_rh_config_descriptor[] = {
 
 	/* one configuration */
 	0x09,       /*  __u8  bLength; */
-	0x02,       /*  __u8  bDescriptorType; Configuration */
+	USB_DT_CONFIG, /* __u8 bDescriptorType; Configuration */
 	0x19, 0x00, /*  __le16 wTotalLength; */
 	0x01,       /*  __u8  bNumInterfaces; (1) */
 	0x01,       /*  __u8  bConfigurationValue; */
@@ -295,7 +295,7 @@ static const u8 hs_rh_config_descriptor[] = {
 
 	/* one interface */
 	0x09,       /*  __u8  if_bLength; */
-	0x04,       /*  __u8  if_bDescriptorType; Interface */
+	USB_DT_INTERFACE, /* __u8 if_bDescriptorType; Interface */
 	0x00,       /*  __u8  if_bInterfaceNumber; */
 	0x00,       /*  __u8  if_bAlternateSetting; */
 	0x01,       /*  __u8  if_bNumEndpoints; */
@@ -306,7 +306,7 @@ static const u8 hs_rh_config_descriptor[] = {
 
 	/* one endpoint (status change endpoint) */
 	0x07,       /*  __u8  ep_bLength; */
-	0x05,       /*  __u8  ep_bDescriptorType; Endpoint */
+	USB_DT_ENDPOINT, /* __u8 ep_bDescriptorType; Endpoint */
 	0x81,       /*  __u8  ep_bEndpointAddress; IN Endpoint 1 */
 	0x03,       /*  __u8  ep_bmAttributes; Interrupt */
 		    /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8)
@@ -318,7 +318,7 @@ static const u8 hs_rh_config_descriptor[] = {
 static const u8 ss_rh_config_descriptor[] = {
 	/* one configuration */
 	0x09,       /*  __u8  bLength; */
-	0x02,       /*  __u8  bDescriptorType; Configuration */
+	USB_DT_CONFIG, /* __u8 bDescriptorType; Configuration */
 	0x1f, 0x00, /*  __le16 wTotalLength; */
 	0x01,       /*  __u8  bNumInterfaces; (1) */
 	0x01,       /*  __u8  bConfigurationValue; */
@@ -332,7 +332,7 @@ static const u8 ss_rh_config_descriptor[] = {
 
 	/* one interface */
 	0x09,       /*  __u8  if_bLength; */
-	0x04,       /*  __u8  if_bDescriptorType; Interface */
+	USB_DT_INTERFACE, /* __u8 if_bDescriptorType; Interface */
 	0x00,       /*  __u8  if_bInterfaceNumber; */
 	0x00,       /*  __u8  if_bAlternateSetting; */
 	0x01,       /*  __u8  if_bNumEndpoints; */
@@ -343,7 +343,7 @@ static const u8 ss_rh_config_descriptor[] = {
 
 	/* one endpoint (status change endpoint) */
 	0x07,       /*  __u8  ep_bLength; */
-	0x05,       /*  __u8  ep_bDescriptorType; Endpoint */
+	USB_DT_ENDPOINT, /* __u8 ep_bDescriptorType; Endpoint */
 	0x81,       /*  __u8  ep_bEndpointAddress; IN Endpoint 1 */
 	0x03,       /*  __u8  ep_bmAttributes; Interrupt */
 		    /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8)
@@ -353,7 +353,8 @@ static const u8 ss_rh_config_descriptor[] = {
 
 	/* one SuperSpeed endpoint companion descriptor */
 	0x06,        /* __u8 ss_bLength */
-	0x30,        /* __u8 ss_bDescriptorType; SuperSpeed EP Companion */
+	USB_DT_SS_ENDPOINT_COMP, /* __u8 ss_bDescriptorType; SuperSpeed EP */
+		     /* Companion */
 	0x00,        /* __u8 ss_bMaxBurst; allows 1 TX between ACKs */
 	0x00,        /* __u8 ss_bmAttributes; 1 packet per service interval */
 	0x02, 0x00   /* __le16 ss_wBytesPerInterval; 15 bits for max 15 ports */
@@ -555,6 +556,7 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
 		switch (wValue & 0xff00) {
 		case USB_DT_DEVICE << 8:
 			switch (hcd->speed) {
+			case HCD_USB31:
 			case HCD_USB3:
 				bufp = usb3_rh_dev_descriptor;
 				break;
@@ -576,6 +578,7 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
 			break;
 		case USB_DT_CONFIG << 8:
 			switch (hcd->speed) {
+			case HCD_USB31:
 			case HCD_USB3:
 				bufp = ss_rh_config_descriptor;
 				len = sizeof ss_rh_config_descriptor;
@@ -854,10 +857,10 @@ static ssize_t authorized_default_show(struct device *dev,
 {
 	struct usb_device *rh_usb_dev = to_usb_device(dev);
 	struct usb_bus *usb_bus = rh_usb_dev->bus;
-	struct usb_hcd *usb_hcd;
+	struct usb_hcd *hcd;
 
-	usb_hcd = bus_to_hcd(usb_bus);
-	return snprintf(buf, PAGE_SIZE, "%u\n", usb_hcd->authorized_default);
+	hcd = bus_to_hcd(usb_bus);
+	return snprintf(buf, PAGE_SIZE, "%u\n", !!HCD_DEV_AUTHORIZED(hcd));
 }
 
 static ssize_t authorized_default_store(struct device *dev,
@@ -868,12 +871,16 @@ static ssize_t authorized_default_store(struct device *dev,
 	unsigned val;
 	struct usb_device *rh_usb_dev = to_usb_device(dev);
 	struct usb_bus *usb_bus = rh_usb_dev->bus;
-	struct usb_hcd *usb_hcd;
+	struct usb_hcd *hcd;
 
-	usb_hcd = bus_to_hcd(usb_bus);
+	hcd = bus_to_hcd(usb_bus);
 	result = sscanf(buf, "%u\n", &val);
 	if (result == 1) {
-		usb_hcd->authorized_default = val ? 1 : 0;
+		if (val)
+			set_bit(HCD_FLAG_DEV_AUTHORIZED, &hcd->flags);
+		else
+			clear_bit(HCD_FLAG_DEV_AUTHORIZED, &hcd->flags);
+
 		result = size;
 	} else {
 		result = -EINVAL;
@@ -882,9 +889,53 @@ static ssize_t authorized_default_store(struct device *dev,
 }
 static DEVICE_ATTR_RW(authorized_default);
 
+/*
+ * interface_authorized_default_show - show default authorization status
+ * for USB interfaces
+ *
+ * note: interface_authorized_default is the default value
+ *       for initializing the authorized attribute of interfaces
+ */
+static ssize_t interface_authorized_default_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct usb_device *usb_dev = to_usb_device(dev);
+	struct usb_hcd *hcd = bus_to_hcd(usb_dev->bus);
+
+	return sprintf(buf, "%u\n", !!HCD_INTF_AUTHORIZED(hcd));
+}
+
+/*
+ * interface_authorized_default_store - store default authorization status
+ * for USB interfaces
+ *
+ * note: interface_authorized_default is the default value
+ *       for initializing the authorized attribute of interfaces
+ */
+static ssize_t interface_authorized_default_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct usb_device *usb_dev = to_usb_device(dev);
+	struct usb_hcd *hcd = bus_to_hcd(usb_dev->bus);
+	int rc = count;
+	bool val;
+
+	if (strtobool(buf, &val) != 0)
+		return -EINVAL;
+
+	if (val)
+		set_bit(HCD_FLAG_INTF_AUTHORIZED, &hcd->flags);
+	else
+		clear_bit(HCD_FLAG_INTF_AUTHORIZED, &hcd->flags);
+
+	return rc;
+}
+static DEVICE_ATTR_RW(interface_authorized_default);
+
 /* Group all the USB bus attributes */
 static struct attribute *usb_bus_attrs[] = {
 		&dev_attr_authorized_default.attr,
+		&dev_attr_interface_authorized_default.attr,
 		NULL,
 };
 
@@ -2676,25 +2727,38 @@ int usb_add_hcd(struct usb_hcd *hcd,
 	dev_info(hcd->self.controller, "%s\n", hcd->product_desc);
 
 	/* Keep old behaviour if authorized_default is not in [0, 1]. */
-	if (authorized_default < 0 || authorized_default > 1)
-		hcd->authorized_default = hcd->wireless ? 0 : 1;
-	else
-		hcd->authorized_default = authorized_default;
+	if (authorized_default < 0 || authorized_default > 1) {
+		if (hcd->wireless)
+			clear_bit(HCD_FLAG_DEV_AUTHORIZED, &hcd->flags);
+		else
+			set_bit(HCD_FLAG_DEV_AUTHORIZED, &hcd->flags);
+	} else {
+		if (authorized_default)
+			set_bit(HCD_FLAG_DEV_AUTHORIZED, &hcd->flags);
+		else
+			clear_bit(HCD_FLAG_DEV_AUTHORIZED, &hcd->flags);
+	}
 	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
 
+	/* per default all interfaces are authorized */
+	set_bit(HCD_FLAG_INTF_AUTHORIZED, &hcd->flags);
+
 	/* HC is in reset state, but accessible.  Now do the one-time init,
 	 * bottom up so that hcds can customize the root hubs before hub_wq
 	 * starts talking to them.  (Note, bus id is assigned early too.)
 	 */
-	if ((retval = hcd_buffer_create(hcd)) != 0) {
+	retval = hcd_buffer_create(hcd);
+	if (retval != 0) {
 		dev_dbg(hcd->self.controller, "pool alloc failed\n");
 		goto err_create_buf;
 	}
 
-	if ((retval = usb_register_bus(&hcd->self)) < 0)
+	retval = usb_register_bus(&hcd->self);
+	if (retval < 0)
 		goto err_register_bus;
 
-	if ((rhdev = usb_alloc_dev(NULL, &hcd->self, 0)) == NULL) {
+	rhdev = usb_alloc_dev(NULL, &hcd->self, 0);
+	if (rhdev == NULL) {
 		dev_err(hcd->self.controller, "unable to allocate root hub\n");
 		retval = -ENOMEM;
 		goto err_allocate_root_hub;
@@ -2714,6 +2778,7 @@ int usb_add_hcd(struct usb_hcd *hcd,
 		rhdev->speed = USB_SPEED_WIRELESS;
 		break;
 	case HCD_USB3:
+	case HCD_USB31:
 		rhdev->speed = USB_SPEED_SUPER;
 		break;
 	default:
@@ -2736,9 +2801,13 @@ int usb_add_hcd(struct usb_hcd *hcd,
 	/* "reset" is misnamed; its role is now one-time init. the controller
 	 * should already have been reset (and boot firmware kicked off etc).
 	 */
-	if (hcd->driver->reset && (retval = hcd->driver->reset(hcd)) < 0) {
-		dev_err(hcd->self.controller, "can't setup: %d\n", retval);
-		goto err_hcd_driver_setup;
+	if (hcd->driver->reset) {
+		retval = hcd->driver->reset(hcd);
+		if (retval < 0) {
+			dev_err(hcd->self.controller, "can't setup: %d\n",
+					retval);
+			goto err_hcd_driver_setup;
+		}
 	}
 	hcd->rh_pollable = 1;
 
@@ -2768,7 +2837,8 @@ int usb_add_hcd(struct usb_hcd *hcd,
 	}
 
 	/* starting here, usbcore will pay attention to this root hub */
-	if ((retval = register_root_hub(hcd)) != 0)
+	retval = register_root_hub(hcd);
+	if (retval != 0)
 		goto err_register_root_hub;
 
 	retval = sysfs_create_group(&rhdev->dev.kobj, &usb_bus_attr_group);
diff --git a/kernel/drivers/usb/core/hub.c b/kernel/drivers/usb/core/hub.c
index 1e9a8c9aa..1560f3f3e 100644
--- a/kernel/drivers/usb/core/hub.c
+++ b/kernel/drivers/usb/core/hub.c
@@ -50,8 +50,8 @@ DEFINE_MUTEX(usb_port_peer_mutex);
 
 /* cycle leds on hubs that aren't blinking for attention */
 static bool blinkenlights = 0;
-module_param (blinkenlights, bool, S_IRUGO);
-MODULE_PARM_DESC (blinkenlights, "true to cycle leds on hubs");
+module_param(blinkenlights, bool, S_IRUGO);
+MODULE_PARM_DESC(blinkenlights, "true to cycle leds on hubs");
 
 /*
  * Device SATA8000 FW1.0 from DATAST0R Technology Corp requires about
@@ -124,10 +124,14 @@ struct usb_hub *usb_hub_to_struct_hub(struct usb_device *hdev)
 
 int usb_device_supports_lpm(struct usb_device *udev)
 {
+	/* Some devices have trouble with LPM */
+	if (udev->quirks & USB_QUIRK_NO_LPM)
+		return 0;
+
 	/* USB 2.1 (and greater) devices indicate LPM support through
 	 * their USB 2.0 Extended Capabilities BOS descriptor.
 	 */
-	if (udev->speed == USB_SPEED_HIGH) {
+	if (udev->speed == USB_SPEED_HIGH || udev->speed == USB_SPEED_FULL) {
 		if (udev->bos->ext_cap &&
 			(USB_LPM_SUPPORT &
 			 le32_to_cpu(udev->bos->ext_cap->bmAttributes)))
@@ -439,7 +443,7 @@ static void set_port_led(struct usb_hub *hub, int port1, int selector)
 
 #define	LED_CYCLE_PERIOD	((2*HZ)/3)
 
-static void led_work (struct work_struct *work)
+static void led_work(struct work_struct *work)
 {
 	struct usb_hub		*hub =
 		container_of(work, struct usb_hub, leds.work);
@@ -646,7 +650,7 @@ static void hub_irq(struct urb *urb)
 
 	default:		/* presumably an error */
 		/* Cause a hub reset after 10 consecutive errors */
-		dev_dbg (hub->intfdev, "transfer --> %d\n", status);
+		dev_dbg(hub->intfdev, "transfer --> %d\n", status);
 		if ((++hub->nerrors < 10) || hub->error)
 			goto resubmit;
 		hub->error = status;
@@ -671,14 +675,14 @@ resubmit:
 	if (hub->quiescing)
 		return;
 
-	if ((status = usb_submit_urb (hub->urb, GFP_ATOMIC)) != 0
-			&& status != -ENODEV && status != -EPERM)
-		dev_err (hub->intfdev, "resubmit --> %d\n", status);
+	status = usb_submit_urb(hub->urb, GFP_ATOMIC);
+	if (status != 0 && status != -ENODEV && status != -EPERM)
+		dev_err(hub->intfdev, "resubmit --> %d\n", status);
 }
 
 /* USB 2.0 spec Section 11.24.2.3 */
 static inline int
-hub_clear_tt_buffer (struct usb_device *hdev, u16 devinfo, u16 tt)
+hub_clear_tt_buffer(struct usb_device *hdev, u16 devinfo, u16 tt)
 {
 	/* Need to clear both directions for control ep */
 	if (((devinfo >> 11) & USB_ENDPOINT_XFERTYPE_MASK) ==
@@ -706,7 +710,7 @@ static void hub_tt_work(struct work_struct *work)
 		container_of(work, struct usb_hub, tt.clear_work);
 	unsigned long		flags;
 
-	spin_lock_irqsave (&hub->tt.lock, flags);
+	spin_lock_irqsave(&hub->tt.lock, flags);
 	while (!list_empty(&hub->tt.clear_list)) {
 		struct list_head	*next;
 		struct usb_tt_clear	*clear;
@@ -715,14 +719,14 @@ static void hub_tt_work(struct work_struct *work)
 		int			status;
 
 		next = hub->tt.clear_list.next;
-		clear = list_entry (next, struct usb_tt_clear, clear_list);
-		list_del (&clear->clear_list);
+		clear = list_entry(next, struct usb_tt_clear, clear_list);
+		list_del(&clear->clear_list);
 
 		/* drop lock so HCD can concurrently report other TT errors */
-		spin_unlock_irqrestore (&hub->tt.lock, flags);
-		status = hub_clear_tt_buffer (hdev, clear->devinfo, clear->tt);
+		spin_unlock_irqrestore(&hub->tt.lock, flags);
+		status = hub_clear_tt_buffer(hdev, clear->devinfo, clear->tt);
 		if (status && status != -ENODEV)
-			dev_err (&hdev->dev,
+			dev_err(&hdev->dev,
 				"clear tt %d (%04x) error %d\n",
 				clear->tt, clear->devinfo, status);
 
@@ -734,7 +738,7 @@ static void hub_tt_work(struct work_struct *work)
 		kfree(clear);
 		spin_lock_irqsave(&hub->tt.lock, flags);
 	}
-	spin_unlock_irqrestore (&hub->tt.lock, flags);
+	spin_unlock_irqrestore(&hub->tt.lock, flags);
 }
 
 /**
@@ -795,8 +799,9 @@ int usb_hub_clear_tt_buffer(struct urb *urb)
 	 * since each TT has "at least two" buffers that can need it (and
 	 * there can be many TTs per hub).  even if they're uncommon.
 	 */
-	if ((clear = kmalloc (sizeof *clear, GFP_ATOMIC)) == NULL) {
-		dev_err (&udev->dev, "can't save CLEAR_TT_BUFFER state\n");
+	clear = kmalloc(sizeof *clear, GFP_ATOMIC);
+	if (clear == NULL) {
+		dev_err(&udev->dev, "can't save CLEAR_TT_BUFFER state\n");
 		/* FIXME recover somehow ... RESET_TT? */
 		return -ENOMEM;
 	}
@@ -805,10 +810,10 @@ int usb_hub_clear_tt_buffer(struct urb *urb)
 	clear->tt = tt->multi ? udev->ttport : 1;
 	clear->devinfo = usb_pipeendpoint (pipe);
 	clear->devinfo |= udev->devnum << 4;
-	clear->devinfo |= usb_pipecontrol (pipe)
+	clear->devinfo |= usb_pipecontrol(pipe)
 			? (USB_ENDPOINT_XFER_CONTROL << 11)
 			: (USB_ENDPOINT_XFER_BULK << 11);
-	if (usb_pipein (pipe))
+	if (usb_pipein(pipe))
 		clear->devinfo |= 1 << 15;
 
 	/* info for completion callback */
@@ -816,10 +821,10 @@ int usb_hub_clear_tt_buffer(struct urb *urb)
 	clear->ep = urb->ep;
 
 	/* tell keventd to clear state for this TT */
-	spin_lock_irqsave (&tt->lock, flags);
-	list_add_tail (&clear->clear_list, &tt->clear_list);
+	spin_lock_irqsave(&tt->lock, flags);
+	list_add_tail(&clear->clear_list, &tt->clear_list);
 	schedule_work(&tt->clear_work);
-	spin_unlock_irqrestore (&tt->lock, flags);
+	spin_unlock_irqrestore(&tt->lock, flags);
 	return 0;
 }
 EXPORT_SYMBOL_GPL(usb_hub_clear_tt_buffer);
@@ -1030,10 +1035,20 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 	unsigned delay;
 
 	/* Continue a partial initialization */
-	if (type == HUB_INIT2)
-		goto init2;
-	if (type == HUB_INIT3)
+	if (type == HUB_INIT2 || type == HUB_INIT3) {
+		device_lock(hub->intfdev);
+
+		/* Was the hub disconnected while we were waiting? */
+		if (hub->disconnected) {
+			device_unlock(hub->intfdev);
+			kref_put(&hub->kref, hub_release);
+			return;
+		}
+		if (type == HUB_INIT2)
+			goto init2;
 		goto init3;
+	}
+	kref_get(&hub->kref);
 
 	/* The superspeed hub except for root hub has to use Hub Depth
 	 * value as an offset into the route string to locate the bits
@@ -1069,7 +1084,7 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 		 * for HUB_POST_RESET, but it's easier not to.
 		 */
 		if (type == HUB_INIT) {
-			unsigned delay = hub_power_on_good_delay(hub);
+			delay = hub_power_on_good_delay(hub);
 
 			hub_power_on(hub, false);
 			INIT_DELAYED_WORK(&hub->init_work, hub_init_func2);
@@ -1231,6 +1246,7 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 			queue_delayed_work(system_power_efficient_wq,
 					&hub->init_work,
 					msecs_to_jiffies(delay));
+			device_unlock(hub->intfdev);
 			return;		/* Continues at init3: below */
 		} else {
 			msleep(delay);
@@ -1252,6 +1268,11 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 	/* Allow autosuspend if it was suppressed */
 	if (type <= HUB_INIT3)
 		usb_autopm_put_interface_async(to_usb_interface(hub->intfdev));
+
+	if (type == HUB_INIT2 || type == HUB_INIT3)
+		device_unlock(hub->intfdev);
+
+	kref_put(&hub->kref, hub_release);
 }
 
 /* Implement the continuations for the delays above */
@@ -1403,7 +1424,6 @@ static int hub_configure(struct usb_hub *hub,
 	/* FIXME for USB 3.0, skip for now */
 	if ((wHubCharacteristics & HUB_CHAR_COMPOUND) &&
 			!(hub_is_superspeed(hdev))) {
-		int	i;
 		char	portstr[USB_MAXCHILDREN + 1];
 
 		for (i = 0; i < maxchild; i++)
@@ -1441,8 +1461,8 @@ static int hub_configure(struct usb_hub *hub,
 		break;
 	}
 
-	spin_lock_init (&hub->tt.lock);
-	INIT_LIST_HEAD (&hub->tt.clear_list);
+	spin_lock_init(&hub->tt.lock);
+	INIT_LIST_HEAD(&hub->tt.clear_list);
 	INIT_WORK(&hub->tt.clear_work, hub_tt_work);
 	switch (hdev->descriptor.bDeviceProtocol) {
 	case USB_HUB_PR_FS:
@@ -1631,7 +1651,7 @@ static int hub_configure(struct usb_hub *hub,
 	return 0;
 
 fail:
-	dev_err (hub_dev, "config failed, %s (err %d)\n",
+	dev_err(hub_dev, "config failed, %s (err %d)\n",
 			message, ret);
 	/* hub_disconnect() frees urb and descriptor */
 	return ret;
@@ -1774,7 +1794,7 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	if ((desc->desc.bInterfaceSubClass != 0) &&
 	    (desc->desc.bInterfaceSubClass != 1)) {
 descriptor_error:
-		dev_err (&intf->dev, "bad descriptor, ignoring hub\n");
+		dev_err(&intf->dev, "bad descriptor, ignoring hub\n");
 		return -EIO;
 	}
 
@@ -1789,11 +1809,11 @@ descriptor_error:
 		goto descriptor_error;
 
 	/* We found a hub */
-	dev_info (&intf->dev, "USB hub found\n");
+	dev_info(&intf->dev, "USB hub found\n");
 
 	hub = kzalloc(sizeof(*hub), GFP_KERNEL);
 	if (!hub) {
-		dev_dbg (&intf->dev, "couldn't kmalloc hub struct\n");
+		dev_dbg(&intf->dev, "couldn't kmalloc hub struct\n");
 		return -ENOMEM;
 	}
 
@@ -1806,7 +1826,7 @@ descriptor_error:
 	usb_get_intf(intf);
 	usb_get_dev(hdev);
 
-	usb_set_intfdata (intf, hub);
+	usb_set_intfdata(intf, hub);
 	intf->needs_remote_wakeup = 1;
 	pm_suspend_ignore_children(&intf->dev, true);
 
@@ -1819,14 +1839,14 @@ descriptor_error:
 	if (hub_configure(hub, endpoint) >= 0)
 		return 0;
 
-	hub_disconnect (intf);
+	hub_disconnect(intf);
 	return -ENODEV;
 }
 
 static int
 hub_ioctl(struct usb_interface *intf, unsigned int code, void *user_data)
 {
-	struct usb_device *hdev = interface_to_usbdev (intf);
+	struct usb_device *hdev = interface_to_usbdev(intf);
 	struct usb_hub *hub = usb_hub_to_struct_hub(hdev);
 
 	/* assert ifno == 0 (part of hub spec) */
@@ -2142,7 +2162,7 @@ void usb_disconnect(struct usb_device **pdev)
 	 * cleaning up all state associated with the current configuration
 	 * so that the hardware is now fully quiesced.
 	 */
-	dev_dbg (&udev->dev, "unregistering device\n");
+	dev_dbg(&udev->dev, "unregistering device\n");
 	usb_disable_device(udev, 0);
 	usb_hcd_synchronize_unlinks(udev);
 
@@ -2239,39 +2259,49 @@ static int usb_enumerate_device_otg(struct usb_device *udev)
 			&& udev->parent == udev->bus->root_hub) {
 		struct usb_otg_descriptor	*desc = NULL;
 		struct usb_bus			*bus = udev->bus;
+		unsigned			port1 = udev->portnum;
 
 		/* descriptor may appear anywhere in config */
-		if (__usb_get_extra_descriptor (udev->rawdescriptors[0],
-					le16_to_cpu(udev->config[0].desc.wTotalLength),
-					USB_DT_OTG, (void **) &desc) == 0) {
-			if (desc->bmAttributes & USB_OTG_HNP) {
-				unsigned		port1 = udev->portnum;
+		err = __usb_get_extra_descriptor(udev->rawdescriptors[0],
+				le16_to_cpu(udev->config[0].desc.wTotalLength),
+				USB_DT_OTG, (void **) &desc);
+		if (err || !(desc->bmAttributes & USB_OTG_HNP))
+			return 0;
 
-				dev_info(&udev->dev,
-					"Dual-Role OTG device on %sHNP port\n",
-					(port1 == bus->otg_port)
-						? "" : "non-");
-
-				/* enable HNP before suspend, it's simpler */
-				if (port1 == bus->otg_port)
-					bus->b_hnp_enable = 1;
-				err = usb_control_msg(udev,
-					usb_sndctrlpipe(udev, 0),
-					USB_REQ_SET_FEATURE, 0,
-					bus->b_hnp_enable
-						? USB_DEVICE_B_HNP_ENABLE
-						: USB_DEVICE_A_ALT_HNP_SUPPORT,
-					0, NULL, 0, USB_CTRL_SET_TIMEOUT);
-				if (err < 0) {
-					/* OTG MESSAGE: report errors here,
-					 * customize to match your product.
-					 */
-					dev_info(&udev->dev,
-						"can't set HNP mode: %d\n",
-						err);
-					bus->b_hnp_enable = 0;
-				}
+		dev_info(&udev->dev, "Dual-Role OTG device on %sHNP port\n",
+					(port1 == bus->otg_port) ? "" : "non-");
+
+		/* enable HNP before suspend, it's simpler */
+		if (port1 == bus->otg_port) {
+			bus->b_hnp_enable = 1;
+			err = usb_control_msg(udev,
+				usb_sndctrlpipe(udev, 0),
+				USB_REQ_SET_FEATURE, 0,
+				USB_DEVICE_B_HNP_ENABLE,
+				0, NULL, 0,
+				USB_CTRL_SET_TIMEOUT);
+			if (err < 0) {
+				/*
+				 * OTG MESSAGE: report errors here,
+				 * customize to match your product.
+				 */
+				dev_err(&udev->dev, "can't set HNP mode: %d\n",
+									err);
+				bus->b_hnp_enable = 0;
 			}
+		} else if (desc->bLength == sizeof
+				(struct usb_otg_descriptor)) {
+			/* Set a_alt_hnp_support for legacy otg device */
+			err = usb_control_msg(udev,
+				usb_sndctrlpipe(udev, 0),
+				USB_REQ_SET_FEATURE, 0,
+				USB_DEVICE_A_ALT_HNP_SUPPORT,
+				0, NULL, 0,
+				USB_CTRL_SET_TIMEOUT);
+			if (err < 0)
+				dev_err(&udev->dev,
+					"set a_alt_hnp_support failed: %d\n",
+					err);
 		}
 	}
 #endif
@@ -2350,6 +2380,26 @@ static void set_usb_port_removable(struct usb_device *udev)
 
 	hub = usb_hub_to_struct_hub(udev->parent);
 
+	/*
+	 * If the platform firmware has provided information about a port,
+	 * use that to determine whether it's removable.
+	 */
+	switch (hub->ports[udev->portnum - 1]->connect_type) {
+	case USB_PORT_CONNECT_TYPE_HOT_PLUG:
+		udev->removable = USB_DEVICE_REMOVABLE;
+		return;
+	case USB_PORT_CONNECT_TYPE_HARD_WIRED:
+	case USB_PORT_NOT_USED:
+		udev->removable = USB_DEVICE_FIXED;
+		return;
+	default:
+		break;
+	}
+
+	/*
+	 * Otherwise, check whether the hub knows whether a port is removable
+	 * or not
+	 */
 	wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics);
 
 	if (!(wHubCharacteristics & HUB_CHAR_COMPOUND))
@@ -2369,21 +2419,6 @@ static void set_usb_port_removable(struct usb_device *udev)
 	else
 		udev->removable = USB_DEVICE_FIXED;
 
-	/*
-	 * Platform firmware may have populated an alternative value for
-	 * removable.  If the parent port has a known connect_type use
-	 * that instead.
-	 */
-	switch (hub->ports[udev->portnum - 1]->connect_type) {
-	case USB_PORT_CONNECT_TYPE_HOT_PLUG:
-		udev->removable = USB_DEVICE_REMOVABLE;
-		break;
-	case USB_PORT_CONNECT_TYPE_HARD_WIRED:
-		udev->removable = USB_DEVICE_FIXED;
-		break;
-	default: /* use what was set above */
-		break;
-	}
 }
 
 /**
@@ -3520,7 +3555,7 @@ static int check_ports_changed(struct usb_hub *hub)
 
 static int hub_suspend(struct usb_interface *intf, pm_message_t msg)
 {
-	struct usb_hub		*hub = usb_get_intfdata (intf);
+	struct usb_hub		*hub = usb_get_intfdata(intf);
 	struct usb_device	*hdev = hub->hdev;
 	unsigned		port1;
 	int			status;
@@ -3860,17 +3895,30 @@ static void usb_enable_link_state(struct usb_hcd *hcd, struct usb_device *udev,
 		return;
 	}
 
-	if (usb_set_lpm_timeout(udev, state, timeout))
+	if (usb_set_lpm_timeout(udev, state, timeout)) {
 		/* If we can't set the parent hub U1/U2 timeout,
 		 * device-initiated LPM won't be allowed either, so let the xHCI
 		 * host know that this link state won't be enabled.
 		 */
 		hcd->driver->disable_usb3_lpm_timeout(hcd, udev, state);
+	} else {
+		/* Only a configured device will accept the Set Feature
+		 * U1/U2_ENABLE
+		 */
+		if (udev->actconfig)
+			usb_set_device_initiated_lpm(udev, state, true);
 
-	/* Only a configured device will accept the Set Feature U1/U2_ENABLE */
-	else if (udev->actconfig)
-		usb_set_device_initiated_lpm(udev, state, true);
-
+		/* As soon as usb_set_lpm_timeout(timeout) returns 0, the
+		 * hub-initiated LPM is enabled. Thus, LPM is enabled no
+		 * matter the result of usb_set_device_initiated_lpm().
+		 * The only difference is whether device is able to initiate
+		 * LPM.
+		 */
+		if (state == USB3_LPM_U1)
+			udev->usb3_lpm_u1_enabled = 1;
+		else if (state == USB3_LPM_U2)
+			udev->usb3_lpm_u2_enabled = 1;
+	}
 }
 
 /*
@@ -3910,6 +3958,18 @@ static int usb_disable_link_state(struct usb_hcd *hcd, struct usb_device *udev,
 		dev_warn(&udev->dev, "Could not disable xHCI %s timeout, "
 				"bus schedule bandwidth may be impacted.\n",
 				usb3_lpm_names[state]);
+
+	/* As soon as usb_set_lpm_timeout(0) return 0, hub initiated LPM
+	 * is disabled. Hub will disallows link to enter U1/U2 as well,
+	 * even device is initiating LPM. Hence LPM is disabled if hub LPM
+	 * timeout set to 0, no matter device-initiated LPM is disabled or
+	 * not.
+	 */
+	if (state == USB3_LPM_U1)
+		udev->usb3_lpm_u1_enabled = 0;
+	else if (state == USB3_LPM_U2)
+		udev->usb3_lpm_u2_enabled = 0;
+
 	return 0;
 }
 
@@ -4212,7 +4272,7 @@ static int hub_enable_device(struct usb_device *udev)
  * but it is still necessary to lock the port.
  */
 static int
-hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
+hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1,
 		int retry_counter)
 {
 	struct usb_device	*hdev = hub->hdev;
@@ -4493,6 +4553,8 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 		goto fail;
 	}
 
+	usb_detect_quirks(udev);
+
 	if (udev->wusb == 0 && le16_to_cpu(udev->descriptor.bcdUSB) >= 0x0201) {
 		retval = usb_get_bos_descriptor(udev);
 		if (!retval) {
@@ -4516,7 +4578,7 @@ fail:
 }
 
 static void
-check_highspeed (struct usb_hub *hub, struct usb_device *udev, int port1)
+check_highspeed(struct usb_hub *hub, struct usb_device *udev, int port1)
 {
 	struct usb_qualifier_descriptor	*qual;
 	int				status;
@@ -4524,11 +4586,11 @@ check_highspeed (struct usb_hub *hub, struct usb_device *udev, int port1)
 	if (udev->quirks & USB_QUIRK_DEVICE_QUALIFIER)
 		return;
 
-	qual = kmalloc (sizeof *qual, GFP_KERNEL);
+	qual = kmalloc(sizeof *qual, GFP_KERNEL);
 	if (qual == NULL)
 		return;
 
-	status = usb_get_descriptor (udev, USB_DT_DEVICE_QUALIFIER, 0,
+	status = usb_get_descriptor(udev, USB_DT_DEVICE_QUALIFIER, 0,
 			qual, sizeof *qual);
 	if (status == sizeof *qual) {
 		dev_info(&udev->dev, "not running at top speed; "
@@ -4544,7 +4606,7 @@ check_highspeed (struct usb_hub *hub, struct usb_device *udev, int port1)
 }
 
 static unsigned
-hub_power_remaining (struct usb_hub *hub)
+hub_power_remaining(struct usb_hub *hub)
 {
 	struct usb_device *hdev = hub->hdev;
 	int remaining;
@@ -4691,7 +4753,6 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus,
 		if (status < 0)
 			goto loop;
 
-		usb_detect_quirks(udev);
 		if (udev->quirks & USB_QUIRK_DELAY_INIT)
 			msleep(1000);
 
@@ -4731,7 +4792,7 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus,
 		if (le16_to_cpu(udev->descriptor.bcdUSB) >= 0x0200
 				&& udev->speed == USB_SPEED_FULL
 				&& highspeed_hubs != 0)
-			check_highspeed (hub, udev, port1);
+			check_highspeed(hub, udev, port1);
 
 		/* Store the parent's children[] pointer.  At this point
 		 * udev becomes globally accessible, although presumably
@@ -5105,7 +5166,7 @@ static const struct usb_device_id hub_id_table[] = {
     { }						/* Terminating entry */
 };
 
-MODULE_DEVICE_TABLE (usb, hub_id_table);
+MODULE_DEVICE_TABLE(usb, hub_id_table);
 
 static struct usb_driver hub_driver = {
 	.name =		"hub",
@@ -5217,7 +5278,7 @@ static int descriptors_changed(struct usb_device *udev,
 			changed = 1;
 			break;
 		}
-		if (memcmp (buf, udev->rawdescriptors[index], old_length)
+		if (memcmp(buf, udev->rawdescriptors[index], old_length)
 				!= 0) {
 			dev_dbg(&udev->dev, "config index %d changed (#%d)\n",
 				index,
@@ -5307,9 +5368,6 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
 	if (udev->usb2_hw_lpm_enabled == 1)
 		usb_set_usb2_hardware_lpm(udev, 0);
 
-	bos = udev->bos;
-	udev->bos = NULL;
-
 	/* Disable LPM and LTM while we reset the device and reinstall the alt
 	 * settings.  Device-initiated LPM settings, and system exit latency
 	 * settings are cleared when the device is reset, so we have to set
@@ -5318,15 +5376,17 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
 	ret = usb_unlocked_disable_lpm(udev);
 	if (ret) {
 		dev_err(&udev->dev, "%s Failed to disable LPM\n.", __func__);
-		goto re_enumerate;
+		goto re_enumerate_no_bos;
 	}
 	ret = usb_disable_ltm(udev);
 	if (ret) {
 		dev_err(&udev->dev, "%s Failed to disable LTM\n.",
 				__func__);
-		goto re_enumerate;
+		goto re_enumerate_no_bos;
 	}
 
+	bos = udev->bos;
+
 	for (i = 0; i < SET_CONFIG_TRIES; ++i) {
 
 		/* ep0 maxpacket size may change; let the HCD know about it.
@@ -5418,15 +5478,19 @@ done:
 	usb_set_usb2_hardware_lpm(udev, 1);
 	usb_unlocked_enable_lpm(udev);
 	usb_enable_ltm(udev);
-	usb_release_bos_descriptor(udev);
-	udev->bos = bos;
+	/* release the new BOS descriptor allocated  by hub_port_init() */
+	if (udev->bos != bos) {
+		usb_release_bos_descriptor(udev);
+		udev->bos = bos;
+	}
 	return 0;
 
 re_enumerate:
-	/* LPM state doesn't matter when we're about to destroy the device. */
-	hub_port_logical_disconnect(parent_hub, port1);
 	usb_release_bos_descriptor(udev);
 	udev->bos = bos;
+re_enumerate_no_bos:
+	/* LPM state doesn't matter when we're about to destroy the device. */
+	hub_port_logical_disconnect(parent_hub, port1);
 	return -ENODEV;
 }
 
diff --git a/kernel/drivers/usb/core/message.c b/kernel/drivers/usb/core/message.c
index f368d2053..8e641b589 100644
--- a/kernel/drivers/usb/core/message.c
+++ b/kernel/drivers/usb/core/message.c
@@ -1387,8 +1387,6 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate)
 	 * new altsetting.
 	 */
 	if (manual) {
-		int i;
-
 		for (i = 0; i < alt->desc.bNumEndpoints; i++) {
 			epaddr = alt->endpoint[i].desc.bEndpointAddress;
 			pipe = __create_pipe(dev,
@@ -1555,6 +1553,44 @@ static void usb_release_interface(struct device *dev)
 	kfree(intf);
 }
 
+/*
+ * usb_deauthorize_interface - deauthorize an USB interface
+ *
+ * @intf: USB interface structure
+ */
+void usb_deauthorize_interface(struct usb_interface *intf)
+{
+	struct device *dev = &intf->dev;
+
+	device_lock(dev->parent);
+
+	if (intf->authorized) {
+		device_lock(dev);
+		intf->authorized = 0;
+		device_unlock(dev);
+
+		usb_forced_unbind_intf(intf);
+	}
+
+	device_unlock(dev->parent);
+}
+
+/*
+ * usb_authorize_interface - authorize an USB interface
+ *
+ * @intf: USB interface structure
+ */
+void usb_authorize_interface(struct usb_interface *intf)
+{
+	struct device *dev = &intf->dev;
+
+	if (!intf->authorized) {
+		device_lock(dev);
+		intf->authorized = 1; /* authorize interface */
+		device_unlock(dev);
+	}
+}
+
 static int usb_if_uevent(struct device *dev, struct kobj_uevent_env *env)
 {
 	struct usb_device *usb_dev;
@@ -1807,6 +1843,7 @@ free_interfaces:
 		intfc = cp->intf_cache[i];
 		intf->altsetting = intfc->altsetting;
 		intf->num_altsetting = intfc->num_altsetting;
+		intf->authorized = !!HCD_INTF_AUTHORIZED(hcd);
 		kref_get(&intfc->ref);
 
 		alt = usb_altnum_to_altsetting(intf, 0);
diff --git a/kernel/drivers/usb/core/otg_whitelist.h b/kernel/drivers/usb/core/otg_whitelist.h
index a6315abe7..a95b0c989 100644
--- a/kernel/drivers/usb/core/otg_whitelist.h
+++ b/kernel/drivers/usb/core/otg_whitelist.h
@@ -16,7 +16,7 @@
  * YOU _SHOULD_ CHANGE THIS LIST TO MATCH YOUR PRODUCT AND ITS TESTING!
  */
 
-static struct usb_device_id whitelist_table [] = {
+static struct usb_device_id whitelist_table[] = {
 
 /* hubs are optional in OTG, but very handy ... */
 { USB_DEVICE_INFO(USB_CLASS_HUB, 0, 0), },
diff --git a/kernel/drivers/usb/core/port.c b/kernel/drivers/usb/core/port.c
index 210618319..5487fe308 100644
--- a/kernel/drivers/usb/core/port.c
+++ b/kernel/drivers/usb/core/port.c
@@ -206,7 +206,7 @@ static int link_peers(struct usb_port *left, struct usb_port *right)
 		else
 			method = "default";
 
-		pr_warn("usb: failed to peer %s and %s by %s (%s:%s) (%s:%s)\n",
+		pr_debug("usb: failed to peer %s and %s by %s (%s:%s) (%s:%s)\n",
 			dev_name(&left->dev), dev_name(&right->dev), method,
 			dev_name(&left->dev),
 			lpeer ? dev_name(&lpeer->dev) : "none",
@@ -265,7 +265,7 @@ static void link_peers_report(struct usb_port *left, struct usb_port *right)
 	if (rc == 0) {
 		dev_dbg(&left->dev, "peered to %s\n", dev_name(&right->dev));
 	} else {
-		dev_warn(&left->dev, "failed to peer to %s (%d)\n",
+		dev_dbg(&left->dev, "failed to peer to %s (%d)\n",
 				dev_name(&right->dev), rc);
 		pr_warn_once("usb: port power management may be unreliable\n");
 		usb_port_block_power_off = 1;
diff --git a/kernel/drivers/usb/core/quirks.c b/kernel/drivers/usb/core/quirks.c
index d85abfed8..6dc810bce 100644
--- a/kernel/drivers/usb/core/quirks.c
+++ b/kernel/drivers/usb/core/quirks.c
@@ -54,6 +54,13 @@ static const struct usb_device_id usb_quirk_list[] = {
 	{ USB_DEVICE(0x046d, 0x082d), .driver_info = USB_QUIRK_DELAY_INIT },
 	{ USB_DEVICE(0x046d, 0x0843), .driver_info = USB_QUIRK_DELAY_INIT },
 
+	/* Logitech ConferenceCam CC3000e */
+	{ USB_DEVICE(0x046d, 0x0847), .driver_info = USB_QUIRK_DELAY_INIT },
+	{ USB_DEVICE(0x046d, 0x0848), .driver_info = USB_QUIRK_DELAY_INIT },
+
+	/* Logitech PTZ Pro Camera */
+	{ USB_DEVICE(0x046d, 0x0853), .driver_info = USB_QUIRK_DELAY_INIT },
+
 	/* Logitech Quickcam Fusion */
 	{ USB_DEVICE(0x046d, 0x08c1), .driver_info = USB_QUIRK_RESET_RESUME },
 
@@ -78,6 +85,12 @@ static const struct usb_device_id usb_quirk_list[] = {
 	/* Philips PSC805 audio device */
 	{ USB_DEVICE(0x0471, 0x0155), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* Plantronic Audio 655 DSP */
+	{ USB_DEVICE(0x047f, 0xc008), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Plantronic Audio 648 USB */
+	{ USB_DEVICE(0x047f, 0xc013), .driver_info = USB_QUIRK_RESET_RESUME },
+
 	/* Artisman Watchdog Dongle */
 	{ USB_DEVICE(0x04b4, 0x0526), .driver_info =
 			USB_QUIRK_CONFIG_INTF_STRINGS },
@@ -112,6 +125,9 @@ static const struct usb_device_id usb_quirk_list[] = {
 	{ USB_DEVICE(0x04f3, 0x016f), .driver_info =
 			USB_QUIRK_DEVICE_QUALIFIER },
 
+	{ USB_DEVICE(0x04f3, 0x21b8), .driver_info =
+			USB_QUIRK_DEVICE_QUALIFIER },
+
 	/* Roland SC-8820 */
 	{ USB_DEVICE(0x0582, 0x0007), .driver_info = USB_QUIRK_RESET_RESUME },
 
@@ -186,6 +202,12 @@ static const struct usb_device_id usb_quirk_list[] = {
 	{ USB_DEVICE(0x1a0a, 0x0200), .driver_info =
 			USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL },
 
+	/* Blackmagic Design Intensity Shuttle */
+	{ USB_DEVICE(0x1edb, 0xbd3b), .driver_info = USB_QUIRK_NO_LPM },
+
+	/* Blackmagic Design UltraStudio SDI */
+	{ USB_DEVICE(0x1edb, 0xbd4f), .driver_info = USB_QUIRK_NO_LPM },
+
 	{ }  /* terminating entry must be last */
 };
 
diff --git a/kernel/drivers/usb/core/sysfs.c b/kernel/drivers/usb/core/sysfs.c
index d26973844..65b6e6b84 100644
--- a/kernel/drivers/usb/core/sysfs.c
+++ b/kernel/drivers/usb/core/sysfs.c
@@ -531,6 +531,44 @@ static ssize_t usb2_lpm_besl_store(struct device *dev,
 }
 static DEVICE_ATTR_RW(usb2_lpm_besl);
 
+static ssize_t usb3_hardware_lpm_u1_show(struct device *dev,
+				      struct device_attribute *attr, char *buf)
+{
+	struct usb_device *udev = to_usb_device(dev);
+	const char *p;
+
+	usb_lock_device(udev);
+
+	if (udev->usb3_lpm_u1_enabled)
+		p = "enabled";
+	else
+		p = "disabled";
+
+	usb_unlock_device(udev);
+
+	return sprintf(buf, "%s\n", p);
+}
+static DEVICE_ATTR_RO(usb3_hardware_lpm_u1);
+
+static ssize_t usb3_hardware_lpm_u2_show(struct device *dev,
+				      struct device_attribute *attr, char *buf)
+{
+	struct usb_device *udev = to_usb_device(dev);
+	const char *p;
+
+	usb_lock_device(udev);
+
+	if (udev->usb3_lpm_u2_enabled)
+		p = "enabled";
+	else
+		p = "disabled";
+
+	usb_unlock_device(udev);
+
+	return sprintf(buf, "%s\n", p);
+}
+static DEVICE_ATTR_RO(usb3_hardware_lpm_u2);
+
 static struct attribute *usb2_hardware_lpm_attr[] = {
 	&dev_attr_usb2_hardware_lpm.attr,
 	&dev_attr_usb2_lpm_l1_timeout.attr,
@@ -542,6 +580,16 @@ static struct attribute_group usb2_hardware_lpm_attr_group = {
 	.attrs	= usb2_hardware_lpm_attr,
 };
 
+static struct attribute *usb3_hardware_lpm_attr[] = {
+	&dev_attr_usb3_hardware_lpm_u1.attr,
+	&dev_attr_usb3_hardware_lpm_u2.attr,
+	NULL,
+};
+static struct attribute_group usb3_hardware_lpm_attr_group = {
+	.name	= power_group_name,
+	.attrs	= usb3_hardware_lpm_attr,
+};
+
 static struct attribute *power_attrs[] = {
 	&dev_attr_autosuspend.attr,
 	&dev_attr_level.attr,
@@ -564,6 +612,10 @@ static int add_power_attributes(struct device *dev)
 		if (udev->usb2_hw_lpm_capable == 1)
 			rc = sysfs_merge_group(&dev->kobj,
 					&usb2_hardware_lpm_attr_group);
+		if (udev->speed == USB_SPEED_SUPER &&
+				udev->lpm_capable == 1)
+			rc = sysfs_merge_group(&dev->kobj,
+					&usb3_hardware_lpm_attr_group);
 	}
 
 	return rc;
@@ -926,6 +978,41 @@ static ssize_t supports_autosuspend_show(struct device *dev,
 }
 static DEVICE_ATTR_RO(supports_autosuspend);
 
+/*
+ * interface_authorized_show - show authorization status of an USB interface
+ * 1 is authorized, 0 is deauthorized
+ */
+static ssize_t interface_authorized_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct usb_interface *intf = to_usb_interface(dev);
+
+	return sprintf(buf, "%u\n", intf->authorized);
+}
+
+/*
+ * interface_authorized_store - authorize or deauthorize an USB interface
+ */
+static ssize_t interface_authorized_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct usb_interface *intf = to_usb_interface(dev);
+	bool val;
+
+	if (strtobool(buf, &val) != 0)
+		return -EINVAL;
+
+	if (val)
+		usb_authorize_interface(intf);
+	else
+		usb_deauthorize_interface(intf);
+
+	return count;
+}
+static struct device_attribute dev_attr_interface_authorized =
+		__ATTR(authorized, S_IRUGO | S_IWUSR,
+		interface_authorized_show, interface_authorized_store);
+
 static struct attribute *intf_attrs[] = {
 	&dev_attr_bInterfaceNumber.attr,
 	&dev_attr_bAlternateSetting.attr,
@@ -935,6 +1022,7 @@ static struct attribute *intf_attrs[] = {
 	&dev_attr_bInterfaceProtocol.attr,
 	&dev_attr_modalias.attr,
 	&dev_attr_supports_autosuspend.attr,
+	&dev_attr_interface_authorized.attr,
 	NULL,
 };
 static struct attribute_group intf_attr_grp = {
diff --git a/kernel/drivers/usb/core/urb.c b/kernel/drivers/usb/core/urb.c
index c9e8ee81b..3d274778c 100644
--- a/kernel/drivers/usb/core/urb.c
+++ b/kernel/drivers/usb/core/urb.c
@@ -129,9 +129,8 @@ void usb_anchor_urb(struct urb *urb, struct usb_anchor *anchor)
 	list_add_tail(&urb->anchor_list, &anchor->urb_list);
 	urb->anchor = anchor;
 
-	if (unlikely(anchor->poisoned)) {
+	if (unlikely(anchor->poisoned))
 		atomic_inc(&urb->reject);
-	}
 
 	spin_unlock_irqrestore(&anchor->lock, flags);
 }
diff --git a/kernel/drivers/usb/core/usb.c b/kernel/drivers/usb/core/usb.c
index 8d5b2f411..f8bbd0b6d 100644
--- a/kernel/drivers/usb/core/usb.c
+++ b/kernel/drivers/usb/core/usb.c
@@ -510,7 +510,7 @@ struct usb_device *usb_alloc_dev(struct usb_device *parent,
 	if (root_hub)	/* Root hub always ok [and always wired] */
 		dev->authorized = 1;
 	else {
-		dev->authorized = usb_hcd->authorized_default;
+		dev->authorized = !!HCD_DEV_AUTHORIZED(usb_hcd);
 		dev->wusb = usb_bus_is_wusb(bus) ? 1 : 0;
 	}
 	return dev;
diff --git a/kernel/drivers/usb/core/usb.h b/kernel/drivers/usb/core/usb.h
index 457255a33..05b5e17ab 100644
--- a/kernel/drivers/usb/core/usb.h
+++ b/kernel/drivers/usb/core/usb.h
@@ -27,6 +27,8 @@ extern void usb_release_interface_cache(struct kref *ref);
 extern void usb_disable_device(struct usb_device *dev, int skip_ep0);
 extern int usb_deauthorize_device(struct usb_device *);
 extern int usb_authorize_device(struct usb_device *);
+extern void usb_deauthorize_interface(struct usb_interface *);
+extern void usb_authorize_interface(struct usb_interface *);
 extern void usb_detect_quirks(struct usb_device *udev);
 extern void usb_detect_interface_quirks(struct usb_device *udev);
 extern int usb_remove_device(struct usb_device *udev);