These changes are the raw update to linux-4.4.6-rt14. Kernel sources

are taken from kernel.org, and rt patch from the rt wiki download page.

During the rebasing, the following patch collided:

Force tick interrupt and get rid of softirq magic(I70131fb85).

Collisions have been removed because its logic was found on the
source already.

Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>

1 files changed, 116 insertions, 25 deletions

diff --git a/kernel/drivers/tty/serial/sh-sci.h b/kernel/drivers/tty/serial/sh-sci.h
index d5db81a0a..bf69bbdcc 100644
--- a/kernel/drivers/tty/serial/sh-sci.h
+++ b/kernel/drivers/tty/serial/sh-sci.h
@@ -1,7 +1,115 @@
+#include <linux/bitops.h>
 #include <linux/serial_core.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
 
+#define SCI_MAJOR		204
+#define SCI_MINOR_START		8
+
+
+/*
+ * SCI register subset common for all port types.
+ * Not all registers will exist on all parts.
+ */
+enum {
+	SCSMR,				/* Serial Mode Register */
+	SCBRR,				/* Bit Rate Register */
+	SCSCR,				/* Serial Control Register */
+	SCxSR,				/* Serial Status Register */
+	SCFCR,				/* FIFO Control Register */
+	SCFDR,				/* FIFO Data Count Register */
+	SCxTDR,				/* Transmit (FIFO) Data Register */
+	SCxRDR,				/* Receive (FIFO) Data Register */
+	SCLSR,				/* Line Status Register */
+	SCTFDR,				/* Transmit FIFO Data Count Register */
+	SCRFDR,				/* Receive FIFO Data Count Register */
+	SCSPTR,				/* Serial Port Register */
+	HSSRR,				/* Sampling Rate Register */
+	SCPCR,				/* Serial Port Control Register */
+	SCPDR,				/* Serial Port Data Register */
+
+	SCIx_NR_REGS,
+};
+
+
+/* SCSMR (Serial Mode Register) */
+#define SCSMR_CHR	BIT(6)	/* 7-bit Character Length */
+#define SCSMR_PE	BIT(5)	/* Parity Enable */
+#define SCSMR_ODD	BIT(4)	/* Odd Parity */
+#define SCSMR_STOP	BIT(3)	/* Stop Bit Length */
+#define SCSMR_CKS	0x0003	/* Clock Select */
+
+/* Serial Control Register, SCIFA/SCIFB only bits */
+#define SCSCR_TDRQE	BIT(15)	/* Tx Data Transfer Request Enable */
+#define SCSCR_RDRQE	BIT(14)	/* Rx Data Transfer Request Enable */
+
+/* SCxSR (Serial Status Register) on SCI */
+#define SCI_TDRE	BIT(7)	/* Transmit Data Register Empty */
+#define SCI_RDRF	BIT(6)	/* Receive Data Register Full */
+#define SCI_ORER	BIT(5)	/* Overrun Error */
+#define SCI_FER		BIT(4)	/* Framing Error */
+#define SCI_PER		BIT(3)	/* Parity Error */
+#define SCI_TEND	BIT(2)	/* Transmit End */
+#define SCI_RESERVED	0x03	/* All reserved bits */
+
+#define SCI_DEFAULT_ERROR_MASK (SCI_PER | SCI_FER)
+
+#define SCI_RDxF_CLEAR	(u32)(~(SCI_RESERVED | SCI_RDRF))
+#define SCI_ERROR_CLEAR	(u32)(~(SCI_RESERVED | SCI_PER | SCI_FER | SCI_ORER))
+#define SCI_TDxE_CLEAR	(u32)(~(SCI_RESERVED | SCI_TEND | SCI_TDRE))
+#define SCI_BREAK_CLEAR	(u32)(~(SCI_RESERVED | SCI_PER | SCI_FER | SCI_ORER))
+
+/* SCxSR (Serial Status Register) on SCIF, SCIFA, SCIFB, HSCIF */
+#define SCIF_ER		BIT(7)	/* Receive Error */
+#define SCIF_TEND	BIT(6)	/* Transmission End */
+#define SCIF_TDFE	BIT(5)	/* Transmit FIFO Data Empty */
+#define SCIF_BRK	BIT(4)	/* Break Detect */
+#define SCIF_FER	BIT(3)	/* Framing Error */
+#define SCIF_PER	BIT(2)	/* Parity Error */
+#define SCIF_RDF	BIT(1)	/* Receive FIFO Data Full */
+#define SCIF_DR		BIT(0)	/* Receive Data Ready */
+/* SCIF only (optional) */
+#define SCIF_PERC	0xf000	/* Number of Parity Errors */
+#define SCIF_FERC	0x0f00	/* Number of Framing Errors */
+/*SCIFA/SCIFB and SCIF on SH7705/SH7720/SH7721 only */
+#define SCIFA_ORER	BIT(9)	/* Overrun Error */
+
+#define SCIF_DEFAULT_ERROR_MASK (SCIF_PER | SCIF_FER | SCIF_BRK | SCIF_ER)
+
+#define SCIF_RDxF_CLEAR		(u32)(~(SCIF_DR | SCIF_RDF))
+#define SCIF_ERROR_CLEAR	(u32)(~(SCIF_PER | SCIF_FER | SCIF_ER))
+#define SCIF_TDxE_CLEAR		(u32)(~(SCIF_TDFE))
+#define SCIF_BREAK_CLEAR	(u32)(~(SCIF_PER | SCIF_FER | SCIF_BRK))
+
+/* SCFCR (FIFO Control Register) */
+#define SCFCR_MCE	BIT(3)	/* Modem Control Enable */
+#define SCFCR_TFRST	BIT(2)	/* Transmit FIFO Data Register Reset */
+#define SCFCR_RFRST	BIT(1)	/* Receive FIFO Data Register Reset */
+#define SCFCR_LOOP	BIT(0)	/* Loopback Test */
+
+/* SCLSR (Line Status Register) on (H)SCIF */
+#define SCLSR_ORER	BIT(0)	/* Overrun Error */
+
+/* SCSPTR (Serial Port Register), optional */
+#define SCSPTR_RTSIO	BIT(7)	/* Serial Port RTS Pin Input/Output */
+#define SCSPTR_RTSDT	BIT(6)	/* Serial Port RTS Pin Data */
+#define SCSPTR_CTSIO	BIT(5)	/* Serial Port CTS Pin Input/Output */
+#define SCSPTR_CTSDT	BIT(4)	/* Serial Port CTS Pin Data */
+#define SCSPTR_SPB2IO	BIT(1)	/* Serial Port Break Input/Output */
+#define SCSPTR_SPB2DT	BIT(0)	/* Serial Port Break Data */
+
+/* HSSRR HSCIF */
+#define HSCIF_SRE	BIT(15)	/* Sampling Rate Register Enable */
+
+/* SCPCR (Serial Port Control Register), SCIFA/SCIFB only */
+#define SCPCR_RTSC	BIT(4)	/* Serial Port RTS Pin / Output Pin */
+#define SCPCR_CTSC	BIT(3)	/* Serial Port CTS Pin / Input Pin */
+
+/* SCPDR (Serial Port Data Register), SCIFA/SCIFB only */
+#define SCPDR_RTSD	BIT(4)	/* Serial Port RTS Output Pin Data */
+#define SCPDR_CTSD	BIT(3)	/* Serial Port CTS Input Pin Data */
+
+
 #define SCxSR_TEND(port)	(((port)->type == PORT_SCI) ? SCI_TEND   : SCIF_TEND)
 #define SCxSR_RDxF(port)	(((port)->type == PORT_SCI) ? SCI_RDRF   : SCIF_RDF)
 #define SCxSR_TDxE(port)	(((port)->type == PORT_SCI) ? SCI_TDRE   : SCIF_TDFE)
@@ -11,28 +119,11 @@
 
 #define SCxSR_ERRORS(port)	(to_sci_port(port)->error_mask)
 
-#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7720) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7721) || \
-    defined(CONFIG_ARCH_SH73A0) || \
-    defined(CONFIG_ARCH_SH7372) || \
-    defined(CONFIG_ARCH_R8A7740)
-
-# define SCxSR_RDxF_CLEAR(port)	 (serial_port_in(port, SCxSR) & 0xfffc)
-# define SCxSR_ERROR_CLEAR(port) (serial_port_in(port, SCxSR) & 0xfd73)
-# define SCxSR_TDxE_CLEAR(port)	 (serial_port_in(port, SCxSR) & 0xffdf)
-# define SCxSR_BREAK_CLEAR(port) (serial_port_in(port, SCxSR) & 0xffe3)
-#else
-# define SCxSR_RDxF_CLEAR(port)	 (((port)->type == PORT_SCI) ? 0xbc : 0x00fc)
-# define SCxSR_ERROR_CLEAR(port) (((port)->type == PORT_SCI) ? 0xc4 : 0x0073)
-# define SCxSR_TDxE_CLEAR(port)  (((port)->type == PORT_SCI) ? 0x78 : 0x00df)
-# define SCxSR_BREAK_CLEAR(port) (((port)->type == PORT_SCI) ? 0xc4 : 0x00e3)
-#endif
-
-/* SCFCR */
-#define SCFCR_RFRST 0x0002
-#define SCFCR_TFRST 0x0004
-#define SCFCR_MCE   0x0008
-
-#define SCI_MAJOR		204
-#define SCI_MINOR_START		8
+#define SCxSR_RDxF_CLEAR(port) \
+	(((port)->type == PORT_SCI) ? SCI_RDxF_CLEAR : SCIF_RDxF_CLEAR)
+#define SCxSR_ERROR_CLEAR(port) \
+	(to_sci_port(port)->error_clear)
+#define SCxSR_TDxE_CLEAR(port) \
+	(((port)->type == PORT_SCI) ? SCI_TDxE_CLEAR : SCIF_TDxE_CLEAR)
+#define SCxSR_BREAK_CLEAR(port) \
+	(((port)->type == PORT_SCI) ? SCI_BREAK_CLEAR : SCIF_BREAK_CLEAR)