diff options
author | 2015-08-04 12:17:53 -0700 | |
---|---|---|
committer | 2015-08-04 15:44:42 -0700 | |
commit | 9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 (patch) | |
tree | 1c9cafbcd35f783a87880a10f85d1a060db1a563 /kernel/drivers/tty/serial/serial_txx9.c | |
parent | 98260f3884f4a202f9ca5eabed40b1354c489b29 (diff) |
Add the rt linux 4.1.3-rt3 as base
Import the rt linux 4.1.3-rt3 as OPNFV kvm base.
It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:
commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Sat Jul 25 12:13:34 2015 +0200
Prepare v4.1.3-rt3
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.
Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>
Diffstat (limited to 'kernel/drivers/tty/serial/serial_txx9.c')
-rw-r--r-- | kernel/drivers/tty/serial/serial_txx9.c | 1328 |
1 files changed, 1328 insertions, 0 deletions
diff --git a/kernel/drivers/tty/serial/serial_txx9.c b/kernel/drivers/tty/serial/serial_txx9.c new file mode 100644 index 000000000..f80312eed --- /dev/null +++ b/kernel/drivers/tty/serial/serial_txx9.c @@ -0,0 +1,1328 @@ +/* + * Derived from many drivers using generic_serial interface, + * especially serial_tx3912.c by Steven J. Hill and r39xx_serial.c + * (was in Linux/VR tree) by Jim Pick. + * + * Copyright (C) 1999 Harald Koerfgen + * Copyright (C) 2000 Jim Pick <jim@jimpick.com> + * Copyright (C) 2001 Steven J. Hill (sjhill@realitydiluted.com) + * Copyright (C) 2000-2002 Toshiba Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Serial driver for TX3927/TX4927/TX4925/TX4938 internal SIO controller + */ + +#if defined(CONFIG_SERIAL_TXX9_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include <linux/module.h> +#include <linux/ioport.h> +#include <linux/init.h> +#include <linux/console.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/pci.h> +#include <linux/serial_core.h> +#include <linux/serial.h> +#include <linux/tty.h> +#include <linux/tty_flip.h> + +#include <asm/io.h> + +static char *serial_version = "1.11"; +static char *serial_name = "TX39/49 Serial driver"; + +#define PASS_LIMIT 256 + +#if !defined(CONFIG_SERIAL_TXX9_STDSERIAL) +/* "ttyS" is used for standard serial driver */ +#define TXX9_TTY_NAME "ttyTX" +#define TXX9_TTY_MINOR_START 196 +#define TXX9_TTY_MAJOR 204 +#else +/* acts like standard serial driver */ +#define TXX9_TTY_NAME "ttyS" +#define TXX9_TTY_MINOR_START 64 +#define TXX9_TTY_MAJOR TTY_MAJOR +#endif + +/* flag aliases */ +#define UPF_TXX9_HAVE_CTS_LINE UPF_BUGGY_UART +#define UPF_TXX9_USE_SCLK UPF_MAGIC_MULTIPLIER + +#ifdef CONFIG_PCI +/* support for Toshiba TC86C001 SIO */ +#define ENABLE_SERIAL_TXX9_PCI +#endif + +/* + * Number of serial ports + */ +#define UART_NR CONFIG_SERIAL_TXX9_NR_UARTS + +struct uart_txx9_port { + struct uart_port port; + /* No additional info for now */ +}; + +#define TXX9_REGION_SIZE 0x24 + +/* TXX9 Serial Registers */ +#define TXX9_SILCR 0x00 +#define TXX9_SIDICR 0x04 +#define TXX9_SIDISR 0x08 +#define TXX9_SICISR 0x0c +#define TXX9_SIFCR 0x10 +#define TXX9_SIFLCR 0x14 +#define TXX9_SIBGR 0x18 +#define TXX9_SITFIFO 0x1c +#define TXX9_SIRFIFO 0x20 + +/* SILCR : Line Control */ +#define TXX9_SILCR_SCS_MASK 0x00000060 +#define TXX9_SILCR_SCS_IMCLK 0x00000000 +#define TXX9_SILCR_SCS_IMCLK_BG 0x00000020 +#define TXX9_SILCR_SCS_SCLK 0x00000040 +#define TXX9_SILCR_SCS_SCLK_BG 0x00000060 +#define TXX9_SILCR_UEPS 0x00000010 +#define TXX9_SILCR_UPEN 0x00000008 +#define TXX9_SILCR_USBL_MASK 0x00000004 +#define TXX9_SILCR_USBL_1BIT 0x00000000 +#define TXX9_SILCR_USBL_2BIT 0x00000004 +#define TXX9_SILCR_UMODE_MASK 0x00000003 +#define TXX9_SILCR_UMODE_8BIT 0x00000000 +#define TXX9_SILCR_UMODE_7BIT 0x00000001 + +/* SIDICR : DMA/Int. Control */ +#define TXX9_SIDICR_TDE 0x00008000 +#define TXX9_SIDICR_RDE 0x00004000 +#define TXX9_SIDICR_TIE 0x00002000 +#define TXX9_SIDICR_RIE 0x00001000 +#define TXX9_SIDICR_SPIE 0x00000800 +#define TXX9_SIDICR_CTSAC 0x00000600 +#define TXX9_SIDICR_STIE_MASK 0x0000003f +#define TXX9_SIDICR_STIE_OERS 0x00000020 +#define TXX9_SIDICR_STIE_CTSS 0x00000010 +#define TXX9_SIDICR_STIE_RBRKD 0x00000008 +#define TXX9_SIDICR_STIE_TRDY 0x00000004 +#define TXX9_SIDICR_STIE_TXALS 0x00000002 +#define TXX9_SIDICR_STIE_UBRKD 0x00000001 + +/* SIDISR : DMA/Int. Status */ +#define TXX9_SIDISR_UBRK 0x00008000 +#define TXX9_SIDISR_UVALID 0x00004000 +#define TXX9_SIDISR_UFER 0x00002000 +#define TXX9_SIDISR_UPER 0x00001000 +#define TXX9_SIDISR_UOER 0x00000800 +#define TXX9_SIDISR_ERI 0x00000400 +#define TXX9_SIDISR_TOUT 0x00000200 +#define TXX9_SIDISR_TDIS 0x00000100 +#define TXX9_SIDISR_RDIS 0x00000080 +#define TXX9_SIDISR_STIS 0x00000040 +#define TXX9_SIDISR_RFDN_MASK 0x0000001f + +/* SICISR : Change Int. Status */ +#define TXX9_SICISR_OERS 0x00000020 +#define TXX9_SICISR_CTSS 0x00000010 +#define TXX9_SICISR_RBRKD 0x00000008 +#define TXX9_SICISR_TRDY 0x00000004 +#define TXX9_SICISR_TXALS 0x00000002 +#define TXX9_SICISR_UBRKD 0x00000001 + +/* SIFCR : FIFO Control */ +#define TXX9_SIFCR_SWRST 0x00008000 +#define TXX9_SIFCR_RDIL_MASK 0x00000180 +#define TXX9_SIFCR_RDIL_1 0x00000000 +#define TXX9_SIFCR_RDIL_4 0x00000080 +#define TXX9_SIFCR_RDIL_8 0x00000100 +#define TXX9_SIFCR_RDIL_12 0x00000180 +#define TXX9_SIFCR_RDIL_MAX 0x00000180 +#define TXX9_SIFCR_TDIL_MASK 0x00000018 +#define TXX9_SIFCR_TDIL_1 0x00000000 +#define TXX9_SIFCR_TDIL_4 0x00000001 +#define TXX9_SIFCR_TDIL_8 0x00000010 +#define TXX9_SIFCR_TDIL_MAX 0x00000010 +#define TXX9_SIFCR_TFRST 0x00000004 +#define TXX9_SIFCR_RFRST 0x00000002 +#define TXX9_SIFCR_FRSTE 0x00000001 +#define TXX9_SIO_TX_FIFO 8 +#define TXX9_SIO_RX_FIFO 16 + +/* SIFLCR : Flow Control */ +#define TXX9_SIFLCR_RCS 0x00001000 +#define TXX9_SIFLCR_TES 0x00000800 +#define TXX9_SIFLCR_RTSSC 0x00000200 +#define TXX9_SIFLCR_RSDE 0x00000100 +#define TXX9_SIFLCR_TSDE 0x00000080 +#define TXX9_SIFLCR_RTSTL_MASK 0x0000001e +#define TXX9_SIFLCR_RTSTL_MAX 0x0000001e +#define TXX9_SIFLCR_TBRK 0x00000001 + +/* SIBGR : Baudrate Control */ +#define TXX9_SIBGR_BCLK_MASK 0x00000300 +#define TXX9_SIBGR_BCLK_T0 0x00000000 +#define TXX9_SIBGR_BCLK_T2 0x00000100 +#define TXX9_SIBGR_BCLK_T4 0x00000200 +#define TXX9_SIBGR_BCLK_T6 0x00000300 +#define TXX9_SIBGR_BRD_MASK 0x000000ff + +static inline unsigned int sio_in(struct uart_txx9_port *up, int offset) +{ + switch (up->port.iotype) { + default: + return __raw_readl(up->port.membase + offset); + case UPIO_PORT: + return inl(up->port.iobase + offset); + } +} + +static inline void +sio_out(struct uart_txx9_port *up, int offset, int value) +{ + switch (up->port.iotype) { + default: + __raw_writel(value, up->port.membase + offset); + break; + case UPIO_PORT: + outl(value, up->port.iobase + offset); + break; + } +} + +static inline void +sio_mask(struct uart_txx9_port *up, int offset, unsigned int value) +{ + sio_out(up, offset, sio_in(up, offset) & ~value); +} +static inline void +sio_set(struct uart_txx9_port *up, int offset, unsigned int value) +{ + sio_out(up, offset, sio_in(up, offset) | value); +} + +static inline void +sio_quot_set(struct uart_txx9_port *up, int quot) +{ + quot >>= 1; + if (quot < 256) + sio_out(up, TXX9_SIBGR, quot | TXX9_SIBGR_BCLK_T0); + else if (quot < (256 << 2)) + sio_out(up, TXX9_SIBGR, (quot >> 2) | TXX9_SIBGR_BCLK_T2); + else if (quot < (256 << 4)) + sio_out(up, TXX9_SIBGR, (quot >> 4) | TXX9_SIBGR_BCLK_T4); + else if (quot < (256 << 6)) + sio_out(up, TXX9_SIBGR, (quot >> 6) | TXX9_SIBGR_BCLK_T6); + else + sio_out(up, TXX9_SIBGR, 0xff | TXX9_SIBGR_BCLK_T6); +} + +static struct uart_txx9_port *to_uart_txx9_port(struct uart_port *port) +{ + return container_of(port, struct uart_txx9_port, port); +} + +static void serial_txx9_stop_tx(struct uart_port *port) +{ + struct uart_txx9_port *up = to_uart_txx9_port(port); + sio_mask(up, TXX9_SIDICR, TXX9_SIDICR_TIE); +} + +static void serial_txx9_start_tx(struct uart_port *port) +{ + struct uart_txx9_port *up = to_uart_txx9_port(port); + sio_set(up, TXX9_SIDICR, TXX9_SIDICR_TIE); +} + +static void serial_txx9_stop_rx(struct uart_port *port) +{ + struct uart_txx9_port *up = to_uart_txx9_port(port); + up->port.read_status_mask &= ~TXX9_SIDISR_RDIS; +} + +static void serial_txx9_initialize(struct uart_port *port) +{ + struct uart_txx9_port *up = to_uart_txx9_port(port); + unsigned int tmout = 10000; + + sio_out(up, TXX9_SIFCR, TXX9_SIFCR_SWRST); + /* TX4925 BUG WORKAROUND. Accessing SIOC register + * immediately after soft reset causes bus error. */ + mmiowb(); + udelay(1); + while ((sio_in(up, TXX9_SIFCR) & TXX9_SIFCR_SWRST) && --tmout) + udelay(1); + /* TX Int by FIFO Empty, RX Int by Receiving 1 char. */ + sio_set(up, TXX9_SIFCR, + TXX9_SIFCR_TDIL_MAX | TXX9_SIFCR_RDIL_1); + /* initial settings */ + sio_out(up, TXX9_SILCR, + TXX9_SILCR_UMODE_8BIT | TXX9_SILCR_USBL_1BIT | + ((up->port.flags & UPF_TXX9_USE_SCLK) ? + TXX9_SILCR_SCS_SCLK_BG : TXX9_SILCR_SCS_IMCLK_BG)); + sio_quot_set(up, uart_get_divisor(port, 9600)); + sio_out(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSTL_MAX /* 15 */); + sio_out(up, TXX9_SIDICR, 0); +} + +static inline void +receive_chars(struct uart_txx9_port *up, unsigned int *status) +{ + unsigned char ch; + unsigned int disr = *status; + int max_count = 256; + char flag; + unsigned int next_ignore_status_mask; + + do { + ch = sio_in(up, TXX9_SIRFIFO); + flag = TTY_NORMAL; + up->port.icount.rx++; + + /* mask out RFDN_MASK bit added by previous overrun */ + next_ignore_status_mask = + up->port.ignore_status_mask & ~TXX9_SIDISR_RFDN_MASK; + if (unlikely(disr & (TXX9_SIDISR_UBRK | TXX9_SIDISR_UPER | + TXX9_SIDISR_UFER | TXX9_SIDISR_UOER))) { + /* + * For statistics only + */ + if (disr & TXX9_SIDISR_UBRK) { + disr &= ~(TXX9_SIDISR_UFER | TXX9_SIDISR_UPER); + up->port.icount.brk++; + /* + * We do the SysRQ and SAK checking + * here because otherwise the break + * may get masked by ignore_status_mask + * or read_status_mask. + */ + if (uart_handle_break(&up->port)) + goto ignore_char; + } else if (disr & TXX9_SIDISR_UPER) + up->port.icount.parity++; + else if (disr & TXX9_SIDISR_UFER) + up->port.icount.frame++; + if (disr & TXX9_SIDISR_UOER) { + up->port.icount.overrun++; + /* + * The receiver read buffer still hold + * a char which caused overrun. + * Ignore next char by adding RFDN_MASK + * to ignore_status_mask temporarily. + */ + next_ignore_status_mask |= + TXX9_SIDISR_RFDN_MASK; + } + + /* + * Mask off conditions which should be ingored. + */ + disr &= up->port.read_status_mask; + + if (disr & TXX9_SIDISR_UBRK) { + flag = TTY_BREAK; + } else if (disr & TXX9_SIDISR_UPER) + flag = TTY_PARITY; + else if (disr & TXX9_SIDISR_UFER) + flag = TTY_FRAME; + } + if (uart_handle_sysrq_char(&up->port, ch)) + goto ignore_char; + + uart_insert_char(&up->port, disr, TXX9_SIDISR_UOER, ch, flag); + + ignore_char: + up->port.ignore_status_mask = next_ignore_status_mask; + disr = sio_in(up, TXX9_SIDISR); + } while (!(disr & TXX9_SIDISR_UVALID) && (max_count-- > 0)); + spin_unlock(&up->port.lock); + tty_flip_buffer_push(&up->port.state->port); + spin_lock(&up->port.lock); + *status = disr; +} + +static inline void transmit_chars(struct uart_txx9_port *up) +{ + struct circ_buf *xmit = &up->port.state->xmit; + int count; + + if (up->port.x_char) { + sio_out(up, TXX9_SITFIFO, up->port.x_char); + up->port.icount.tx++; + up->port.x_char = 0; + return; + } + if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { + serial_txx9_stop_tx(&up->port); + return; + } + + count = TXX9_SIO_TX_FIFO; + do { + sio_out(up, TXX9_SITFIFO, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + up->port.icount.tx++; + if (uart_circ_empty(xmit)) + break; + } while (--count > 0); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + + if (uart_circ_empty(xmit)) + serial_txx9_stop_tx(&up->port); +} + +static irqreturn_t serial_txx9_interrupt(int irq, void *dev_id) +{ + int pass_counter = 0; + struct uart_txx9_port *up = dev_id; + unsigned int status; + + while (1) { + spin_lock(&up->port.lock); + status = sio_in(up, TXX9_SIDISR); + if (!(sio_in(up, TXX9_SIDICR) & TXX9_SIDICR_TIE)) + status &= ~TXX9_SIDISR_TDIS; + if (!(status & (TXX9_SIDISR_TDIS | TXX9_SIDISR_RDIS | + TXX9_SIDISR_TOUT))) { + spin_unlock(&up->port.lock); + break; + } + + if (status & TXX9_SIDISR_RDIS) + receive_chars(up, &status); + if (status & TXX9_SIDISR_TDIS) + transmit_chars(up); + /* Clear TX/RX Int. Status */ + sio_mask(up, TXX9_SIDISR, + TXX9_SIDISR_TDIS | TXX9_SIDISR_RDIS | + TXX9_SIDISR_TOUT); + spin_unlock(&up->port.lock); + + if (pass_counter++ > PASS_LIMIT) + break; + } + + return pass_counter ? IRQ_HANDLED : IRQ_NONE; +} + +static unsigned int serial_txx9_tx_empty(struct uart_port *port) +{ + struct uart_txx9_port *up = to_uart_txx9_port(port); + unsigned long flags; + unsigned int ret; + + spin_lock_irqsave(&up->port.lock, flags); + ret = (sio_in(up, TXX9_SICISR) & TXX9_SICISR_TXALS) ? TIOCSER_TEMT : 0; + spin_unlock_irqrestore(&up->port.lock, flags); + + return ret; +} + +static unsigned int serial_txx9_get_mctrl(struct uart_port *port) +{ + struct uart_txx9_port *up = to_uart_txx9_port(port); + unsigned int ret; + + /* no modem control lines */ + ret = TIOCM_CAR | TIOCM_DSR; + ret |= (sio_in(up, TXX9_SIFLCR) & TXX9_SIFLCR_RTSSC) ? 0 : TIOCM_RTS; + ret |= (sio_in(up, TXX9_SICISR) & TXX9_SICISR_CTSS) ? 0 : TIOCM_CTS; + + return ret; +} + +static void serial_txx9_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_txx9_port *up = to_uart_txx9_port(port); + + if (mctrl & TIOCM_RTS) + sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSSC); + else + sio_set(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSSC); +} + +static void serial_txx9_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_txx9_port *up = to_uart_txx9_port(port); + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + if (break_state == -1) + sio_set(up, TXX9_SIFLCR, TXX9_SIFLCR_TBRK); + else + sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_TBRK); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +#if defined(CONFIG_SERIAL_TXX9_CONSOLE) || defined(CONFIG_CONSOLE_POLL) +/* + * Wait for transmitter & holding register to empty + */ +static void wait_for_xmitr(struct uart_txx9_port *up) +{ + unsigned int tmout = 10000; + + /* Wait up to 10ms for the character(s) to be sent. */ + while (--tmout && + !(sio_in(up, TXX9_SICISR) & TXX9_SICISR_TXALS)) + udelay(1); + + /* Wait up to 1s for flow control if necessary */ + if (up->port.flags & UPF_CONS_FLOW) { + tmout = 1000000; + while (--tmout && + (sio_in(up, TXX9_SICISR) & TXX9_SICISR_CTSS)) + udelay(1); + } +} +#endif + +#ifdef CONFIG_CONSOLE_POLL +/* + * Console polling routines for writing and reading from the uart while + * in an interrupt or debug context. + */ + +static int serial_txx9_get_poll_char(struct uart_port *port) +{ + unsigned int ier; + unsigned char c; + struct uart_txx9_port *up = to_uart_txx9_port(port); + + /* + * First save the IER then disable the interrupts + */ + ier = sio_in(up, TXX9_SIDICR); + sio_out(up, TXX9_SIDICR, 0); + + while (sio_in(up, TXX9_SIDISR) & TXX9_SIDISR_UVALID) + ; + + c = sio_in(up, TXX9_SIRFIFO); + + /* + * Finally, clear RX interrupt status + * and restore the IER + */ + sio_mask(up, TXX9_SIDISR, TXX9_SIDISR_RDIS); + sio_out(up, TXX9_SIDICR, ier); + return c; +} + + +static void serial_txx9_put_poll_char(struct uart_port *port, unsigned char c) +{ + unsigned int ier; + struct uart_txx9_port *up = to_uart_txx9_port(port); + + /* + * First save the IER then disable the interrupts + */ + ier = sio_in(up, TXX9_SIDICR); + sio_out(up, TXX9_SIDICR, 0); + + wait_for_xmitr(up); + /* + * Send the character out. + */ + sio_out(up, TXX9_SITFIFO, c); + + /* + * Finally, wait for transmitter to become empty + * and restore the IER + */ + wait_for_xmitr(up); + sio_out(up, TXX9_SIDICR, ier); +} + +#endif /* CONFIG_CONSOLE_POLL */ + +static int serial_txx9_startup(struct uart_port *port) +{ + struct uart_txx9_port *up = to_uart_txx9_port(port); + unsigned long flags; + int retval; + + /* + * Clear the FIFO buffers and disable them. + * (they will be reenabled in set_termios()) + */ + sio_set(up, TXX9_SIFCR, + TXX9_SIFCR_TFRST | TXX9_SIFCR_RFRST | TXX9_SIFCR_FRSTE); + /* clear reset */ + sio_mask(up, TXX9_SIFCR, + TXX9_SIFCR_TFRST | TXX9_SIFCR_RFRST | TXX9_SIFCR_FRSTE); + sio_out(up, TXX9_SIDICR, 0); + + /* + * Clear the interrupt registers. + */ + sio_out(up, TXX9_SIDISR, 0); + + retval = request_irq(up->port.irq, serial_txx9_interrupt, + IRQF_SHARED, "serial_txx9", up); + if (retval) + return retval; + + /* + * Now, initialize the UART + */ + spin_lock_irqsave(&up->port.lock, flags); + serial_txx9_set_mctrl(&up->port, up->port.mctrl); + spin_unlock_irqrestore(&up->port.lock, flags); + + /* Enable RX/TX */ + sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_RSDE | TXX9_SIFLCR_TSDE); + + /* + * Finally, enable interrupts. + */ + sio_set(up, TXX9_SIDICR, TXX9_SIDICR_RIE); + + return 0; +} + +static void serial_txx9_shutdown(struct uart_port *port) +{ + struct uart_txx9_port *up = to_uart_txx9_port(port); + unsigned long flags; + + /* + * Disable interrupts from this port + */ + sio_out(up, TXX9_SIDICR, 0); /* disable all intrs */ + + spin_lock_irqsave(&up->port.lock, flags); + serial_txx9_set_mctrl(&up->port, up->port.mctrl); + spin_unlock_irqrestore(&up->port.lock, flags); + + /* + * Disable break condition + */ + sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_TBRK); + +#ifdef CONFIG_SERIAL_TXX9_CONSOLE + if (up->port.cons && up->port.line == up->port.cons->index) { + free_irq(up->port.irq, up); + return; + } +#endif + /* reset FIFOs */ + sio_set(up, TXX9_SIFCR, + TXX9_SIFCR_TFRST | TXX9_SIFCR_RFRST | TXX9_SIFCR_FRSTE); + /* clear reset */ + sio_mask(up, TXX9_SIFCR, + TXX9_SIFCR_TFRST | TXX9_SIFCR_RFRST | TXX9_SIFCR_FRSTE); + + /* Disable RX/TX */ + sio_set(up, TXX9_SIFLCR, TXX9_SIFLCR_RSDE | TXX9_SIFLCR_TSDE); + + free_irq(up->port.irq, up); +} + +static void +serial_txx9_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct uart_txx9_port *up = to_uart_txx9_port(port); + unsigned int cval, fcr = 0; + unsigned long flags; + unsigned int baud, quot; + + /* + * We don't support modem control lines. + */ + termios->c_cflag &= ~(HUPCL | CMSPAR); + termios->c_cflag |= CLOCAL; + + cval = sio_in(up, TXX9_SILCR); + /* byte size and parity */ + cval &= ~TXX9_SILCR_UMODE_MASK; + switch (termios->c_cflag & CSIZE) { + case CS7: + cval |= TXX9_SILCR_UMODE_7BIT; + break; + default: + case CS5: /* not supported */ + case CS6: /* not supported */ + case CS8: + cval |= TXX9_SILCR_UMODE_8BIT; + break; + } + + cval &= ~TXX9_SILCR_USBL_MASK; + if (termios->c_cflag & CSTOPB) + cval |= TXX9_SILCR_USBL_2BIT; + else + cval |= TXX9_SILCR_USBL_1BIT; + cval &= ~(TXX9_SILCR_UPEN | TXX9_SILCR_UEPS); + if (termios->c_cflag & PARENB) + cval |= TXX9_SILCR_UPEN; + if (!(termios->c_cflag & PARODD)) + cval |= TXX9_SILCR_UEPS; + + /* + * Ask the core to calculate the divisor for us. + */ + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16/2); + quot = uart_get_divisor(port, baud); + + /* Set up FIFOs */ + /* TX Int by FIFO Empty, RX Int by Receiving 1 char. */ + fcr = TXX9_SIFCR_TDIL_MAX | TXX9_SIFCR_RDIL_1; + + /* + * Ok, we're now changing the port state. Do it with + * interrupts disabled. + */ + spin_lock_irqsave(&up->port.lock, flags); + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + up->port.read_status_mask = TXX9_SIDISR_UOER | + TXX9_SIDISR_TDIS | TXX9_SIDISR_RDIS; + if (termios->c_iflag & INPCK) + up->port.read_status_mask |= TXX9_SIDISR_UFER | TXX9_SIDISR_UPER; + if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK)) + up->port.read_status_mask |= TXX9_SIDISR_UBRK; + + /* + * Characteres to ignore + */ + up->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= TXX9_SIDISR_UPER | TXX9_SIDISR_UFER; + if (termios->c_iflag & IGNBRK) { + up->port.ignore_status_mask |= TXX9_SIDISR_UBRK; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= TXX9_SIDISR_UOER; + } + + /* + * ignore all characters if CREAD is not set + */ + if ((termios->c_cflag & CREAD) == 0) + up->port.ignore_status_mask |= TXX9_SIDISR_RDIS; + + /* CTS flow control flag */ + if ((termios->c_cflag & CRTSCTS) && + (up->port.flags & UPF_TXX9_HAVE_CTS_LINE)) { + sio_set(up, TXX9_SIFLCR, + TXX9_SIFLCR_RCS | TXX9_SIFLCR_TES); + } else { + sio_mask(up, TXX9_SIFLCR, + TXX9_SIFLCR_RCS | TXX9_SIFLCR_TES); + } + + sio_out(up, TXX9_SILCR, cval); + sio_quot_set(up, quot); + sio_out(up, TXX9_SIFCR, fcr); + + serial_txx9_set_mctrl(&up->port, up->port.mctrl); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static void +serial_txx9_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ + /* + * If oldstate was -1 this is called from + * uart_configure_port(). In this case do not initialize the + * port now, because the port was already initialized (for + * non-console port) or should not be initialized here (for + * console port). If we initialized the port here we lose + * serial console settings. + */ + if (state == 0 && oldstate != -1) + serial_txx9_initialize(port); +} + +static int serial_txx9_request_resource(struct uart_txx9_port *up) +{ + unsigned int size = TXX9_REGION_SIZE; + int ret = 0; + + switch (up->port.iotype) { + default: + if (!up->port.mapbase) + break; + + if (!request_mem_region(up->port.mapbase, size, "serial_txx9")) { + ret = -EBUSY; + break; + } + + if (up->port.flags & UPF_IOREMAP) { + up->port.membase = ioremap(up->port.mapbase, size); + if (!up->port.membase) { + release_mem_region(up->port.mapbase, size); + ret = -ENOMEM; + } + } + break; + + case UPIO_PORT: + if (!request_region(up->port.iobase, size, "serial_txx9")) + ret = -EBUSY; + break; + } + return ret; +} + +static void serial_txx9_release_resource(struct uart_txx9_port *up) +{ + unsigned int size = TXX9_REGION_SIZE; + + switch (up->port.iotype) { + default: + if (!up->port.mapbase) + break; + + if (up->port.flags & UPF_IOREMAP) { + iounmap(up->port.membase); + up->port.membase = NULL; + } + + release_mem_region(up->port.mapbase, size); + break; + + case UPIO_PORT: + release_region(up->port.iobase, size); + break; + } +} + +static void serial_txx9_release_port(struct uart_port *port) +{ + struct uart_txx9_port *up = to_uart_txx9_port(port); + serial_txx9_release_resource(up); +} + +static int serial_txx9_request_port(struct uart_port *port) +{ + struct uart_txx9_port *up = to_uart_txx9_port(port); + return serial_txx9_request_resource(up); +} + +static void serial_txx9_config_port(struct uart_port *port, int uflags) +{ + struct uart_txx9_port *up = to_uart_txx9_port(port); + int ret; + + /* + * Find the region that we can probe for. This in turn + * tells us whether we can probe for the type of port. + */ + ret = serial_txx9_request_resource(up); + if (ret < 0) + return; + port->type = PORT_TXX9; + up->port.fifosize = TXX9_SIO_TX_FIFO; + +#ifdef CONFIG_SERIAL_TXX9_CONSOLE + if (up->port.line == up->port.cons->index) + return; +#endif + serial_txx9_initialize(port); +} + +static const char * +serial_txx9_type(struct uart_port *port) +{ + return "txx9"; +} + +static struct uart_ops serial_txx9_pops = { + .tx_empty = serial_txx9_tx_empty, + .set_mctrl = serial_txx9_set_mctrl, + .get_mctrl = serial_txx9_get_mctrl, + .stop_tx = serial_txx9_stop_tx, + .start_tx = serial_txx9_start_tx, + .stop_rx = serial_txx9_stop_rx, + .break_ctl = serial_txx9_break_ctl, + .startup = serial_txx9_startup, + .shutdown = serial_txx9_shutdown, + .set_termios = serial_txx9_set_termios, + .pm = serial_txx9_pm, + .type = serial_txx9_type, + .release_port = serial_txx9_release_port, + .request_port = serial_txx9_request_port, + .config_port = serial_txx9_config_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = serial_txx9_get_poll_char, + .poll_put_char = serial_txx9_put_poll_char, +#endif +}; + +static struct uart_txx9_port serial_txx9_ports[UART_NR]; + +static void __init serial_txx9_register_ports(struct uart_driver *drv, + struct device *dev) +{ + int i; + + for (i = 0; i < UART_NR; i++) { + struct uart_txx9_port *up = &serial_txx9_ports[i]; + + up->port.line = i; + up->port.ops = &serial_txx9_pops; + up->port.dev = dev; + if (up->port.iobase || up->port.mapbase) + uart_add_one_port(drv, &up->port); + } +} + +#ifdef CONFIG_SERIAL_TXX9_CONSOLE + +static void serial_txx9_console_putchar(struct uart_port *port, int ch) +{ + struct uart_txx9_port *up = to_uart_txx9_port(port); + + wait_for_xmitr(up); + sio_out(up, TXX9_SITFIFO, ch); +} + +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + * + * The console_lock must be held when we get here. + */ +static void +serial_txx9_console_write(struct console *co, const char *s, unsigned int count) +{ + struct uart_txx9_port *up = &serial_txx9_ports[co->index]; + unsigned int ier, flcr; + + /* + * First save the UER then disable the interrupts + */ + ier = sio_in(up, TXX9_SIDICR); + sio_out(up, TXX9_SIDICR, 0); + /* + * Disable flow-control if enabled (and unnecessary) + */ + flcr = sio_in(up, TXX9_SIFLCR); + if (!(up->port.flags & UPF_CONS_FLOW) && (flcr & TXX9_SIFLCR_TES)) + sio_out(up, TXX9_SIFLCR, flcr & ~TXX9_SIFLCR_TES); + + uart_console_write(&up->port, s, count, serial_txx9_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and restore the IER + */ + wait_for_xmitr(up); + sio_out(up, TXX9_SIFLCR, flcr); + sio_out(up, TXX9_SIDICR, ier); +} + +static int __init serial_txx9_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + struct uart_txx9_port *up; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index >= UART_NR) + co->index = 0; + up = &serial_txx9_ports[co->index]; + port = &up->port; + if (!port->ops) + return -ENODEV; + + serial_txx9_initialize(&up->port); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static struct uart_driver serial_txx9_reg; +static struct console serial_txx9_console = { + .name = TXX9_TTY_NAME, + .write = serial_txx9_console_write, + .device = uart_console_device, + .setup = serial_txx9_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &serial_txx9_reg, +}; + +static int __init serial_txx9_console_init(void) +{ + register_console(&serial_txx9_console); + return 0; +} +console_initcall(serial_txx9_console_init); + +#define SERIAL_TXX9_CONSOLE &serial_txx9_console +#else +#define SERIAL_TXX9_CONSOLE NULL +#endif + +static struct uart_driver serial_txx9_reg = { + .owner = THIS_MODULE, + .driver_name = "serial_txx9", + .dev_name = TXX9_TTY_NAME, + .major = TXX9_TTY_MAJOR, + .minor = TXX9_TTY_MINOR_START, + .nr = UART_NR, + .cons = SERIAL_TXX9_CONSOLE, +}; + +int __init early_serial_txx9_setup(struct uart_port *port) +{ + if (port->line >= ARRAY_SIZE(serial_txx9_ports)) + return -ENODEV; + + serial_txx9_ports[port->line].port = *port; + serial_txx9_ports[port->line].port.ops = &serial_txx9_pops; + serial_txx9_ports[port->line].port.flags |= + UPF_BOOT_AUTOCONF | UPF_FIXED_PORT; + return 0; +} + +static DEFINE_MUTEX(serial_txx9_mutex); + +/** + * serial_txx9_register_port - register a serial port + * @port: serial port template + * + * Configure the serial port specified by the request. + * + * The port is then probed and if necessary the IRQ is autodetected + * If this fails an error is returned. + * + * On success the port is ready to use and the line number is returned. + */ +static int serial_txx9_register_port(struct uart_port *port) +{ + int i; + struct uart_txx9_port *uart; + int ret = -ENOSPC; + + mutex_lock(&serial_txx9_mutex); + for (i = 0; i < UART_NR; i++) { + uart = &serial_txx9_ports[i]; + if (uart_match_port(&uart->port, port)) { + uart_remove_one_port(&serial_txx9_reg, &uart->port); + break; + } + } + if (i == UART_NR) { + /* Find unused port */ + for (i = 0; i < UART_NR; i++) { + uart = &serial_txx9_ports[i]; + if (!(uart->port.iobase || uart->port.mapbase)) + break; + } + } + if (i < UART_NR) { + uart->port.iobase = port->iobase; + uart->port.membase = port->membase; + uart->port.irq = port->irq; + uart->port.uartclk = port->uartclk; + uart->port.iotype = port->iotype; + uart->port.flags = port->flags + | UPF_BOOT_AUTOCONF | UPF_FIXED_PORT; + uart->port.mapbase = port->mapbase; + if (port->dev) + uart->port.dev = port->dev; + ret = uart_add_one_port(&serial_txx9_reg, &uart->port); + if (ret == 0) + ret = uart->port.line; + } + mutex_unlock(&serial_txx9_mutex); + return ret; +} + +/** + * serial_txx9_unregister_port - remove a txx9 serial port at runtime + * @line: serial line number + * + * Remove one serial port. This may not be called from interrupt + * context. We hand the port back to the our control. + */ +static void serial_txx9_unregister_port(int line) +{ + struct uart_txx9_port *uart = &serial_txx9_ports[line]; + + mutex_lock(&serial_txx9_mutex); + uart_remove_one_port(&serial_txx9_reg, &uart->port); + uart->port.flags = 0; + uart->port.type = PORT_UNKNOWN; + uart->port.iobase = 0; + uart->port.mapbase = 0; + uart->port.membase = NULL; + uart->port.dev = NULL; + mutex_unlock(&serial_txx9_mutex); +} + +/* + * Register a set of serial devices attached to a platform device. + */ +static int serial_txx9_probe(struct platform_device *dev) +{ + struct uart_port *p = dev_get_platdata(&dev->dev); + struct uart_port port; + int ret, i; + + memset(&port, 0, sizeof(struct uart_port)); + for (i = 0; p && p->uartclk != 0; p++, i++) { + port.iobase = p->iobase; + port.membase = p->membase; + port.irq = p->irq; + port.uartclk = p->uartclk; + port.iotype = p->iotype; + port.flags = p->flags; + port.mapbase = p->mapbase; + port.dev = &dev->dev; + ret = serial_txx9_register_port(&port); + if (ret < 0) { + dev_err(&dev->dev, "unable to register port at index %d " + "(IO%lx MEM%llx IRQ%d): %d\n", i, + p->iobase, (unsigned long long)p->mapbase, + p->irq, ret); + } + } + return 0; +} + +/* + * Remove serial ports registered against a platform device. + */ +static int serial_txx9_remove(struct platform_device *dev) +{ + int i; + + for (i = 0; i < UART_NR; i++) { + struct uart_txx9_port *up = &serial_txx9_ports[i]; + + if (up->port.dev == &dev->dev) + serial_txx9_unregister_port(i); + } + return 0; +} + +#ifdef CONFIG_PM +static int serial_txx9_suspend(struct platform_device *dev, pm_message_t state) +{ + int i; + + for (i = 0; i < UART_NR; i++) { + struct uart_txx9_port *up = &serial_txx9_ports[i]; + + if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev) + uart_suspend_port(&serial_txx9_reg, &up->port); + } + + return 0; +} + +static int serial_txx9_resume(struct platform_device *dev) +{ + int i; + + for (i = 0; i < UART_NR; i++) { + struct uart_txx9_port *up = &serial_txx9_ports[i]; + + if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev) + uart_resume_port(&serial_txx9_reg, &up->port); + } + + return 0; +} +#endif + +static struct platform_driver serial_txx9_plat_driver = { + .probe = serial_txx9_probe, + .remove = serial_txx9_remove, +#ifdef CONFIG_PM + .suspend = serial_txx9_suspend, + .resume = serial_txx9_resume, +#endif + .driver = { + .name = "serial_txx9", + }, +}; + +#ifdef ENABLE_SERIAL_TXX9_PCI +/* + * Probe one serial board. Unfortunately, there is no rhyme nor reason + * to the arrangement of serial ports on a PCI card. + */ +static int +pciserial_txx9_init_one(struct pci_dev *dev, const struct pci_device_id *ent) +{ + struct uart_port port; + int line; + int rc; + + rc = pci_enable_device(dev); + if (rc) + return rc; + + memset(&port, 0, sizeof(port)); + port.ops = &serial_txx9_pops; + port.flags |= UPF_TXX9_HAVE_CTS_LINE; + port.uartclk = 66670000; + port.irq = dev->irq; + port.iotype = UPIO_PORT; + port.iobase = pci_resource_start(dev, 1); + port.dev = &dev->dev; + line = serial_txx9_register_port(&port); + if (line < 0) { + printk(KERN_WARNING "Couldn't register serial port %s: %d\n", pci_name(dev), line); + pci_disable_device(dev); + return line; + } + pci_set_drvdata(dev, &serial_txx9_ports[line]); + + return 0; +} + +static void pciserial_txx9_remove_one(struct pci_dev *dev) +{ + struct uart_txx9_port *up = pci_get_drvdata(dev); + + if (up) { + serial_txx9_unregister_port(up->port.line); + pci_disable_device(dev); + } +} + +#ifdef CONFIG_PM +static int pciserial_txx9_suspend_one(struct pci_dev *dev, pm_message_t state) +{ + struct uart_txx9_port *up = pci_get_drvdata(dev); + + if (up) + uart_suspend_port(&serial_txx9_reg, &up->port); + pci_save_state(dev); + pci_set_power_state(dev, pci_choose_state(dev, state)); + return 0; +} + +static int pciserial_txx9_resume_one(struct pci_dev *dev) +{ + struct uart_txx9_port *up = pci_get_drvdata(dev); + + pci_set_power_state(dev, PCI_D0); + pci_restore_state(dev); + if (up) + uart_resume_port(&serial_txx9_reg, &up->port); + return 0; +} +#endif + +static const struct pci_device_id serial_txx9_pci_tbl[] = { + { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_TC86C001_MISC) }, + { 0, } +}; + +static struct pci_driver serial_txx9_pci_driver = { + .name = "serial_txx9", + .probe = pciserial_txx9_init_one, + .remove = pciserial_txx9_remove_one, +#ifdef CONFIG_PM + .suspend = pciserial_txx9_suspend_one, + .resume = pciserial_txx9_resume_one, +#endif + .id_table = serial_txx9_pci_tbl, +}; + +MODULE_DEVICE_TABLE(pci, serial_txx9_pci_tbl); +#endif /* ENABLE_SERIAL_TXX9_PCI */ + +static struct platform_device *serial_txx9_plat_devs; + +static int __init serial_txx9_init(void) +{ + int ret; + + printk(KERN_INFO "%s version %s\n", serial_name, serial_version); + + ret = uart_register_driver(&serial_txx9_reg); + if (ret) + goto out; + + serial_txx9_plat_devs = platform_device_alloc("serial_txx9", -1); + if (!serial_txx9_plat_devs) { + ret = -ENOMEM; + goto unreg_uart_drv; + } + + ret = platform_device_add(serial_txx9_plat_devs); + if (ret) + goto put_dev; + + serial_txx9_register_ports(&serial_txx9_reg, + &serial_txx9_plat_devs->dev); + + ret = platform_driver_register(&serial_txx9_plat_driver); + if (ret) + goto del_dev; + +#ifdef ENABLE_SERIAL_TXX9_PCI + ret = pci_register_driver(&serial_txx9_pci_driver); +#endif + if (ret == 0) + goto out; + + del_dev: + platform_device_del(serial_txx9_plat_devs); + put_dev: + platform_device_put(serial_txx9_plat_devs); + unreg_uart_drv: + uart_unregister_driver(&serial_txx9_reg); + out: + return ret; +} + +static void __exit serial_txx9_exit(void) +{ + int i; + +#ifdef ENABLE_SERIAL_TXX9_PCI + pci_unregister_driver(&serial_txx9_pci_driver); +#endif + platform_driver_unregister(&serial_txx9_plat_driver); + platform_device_unregister(serial_txx9_plat_devs); + for (i = 0; i < UART_NR; i++) { + struct uart_txx9_port *up = &serial_txx9_ports[i]; + if (up->port.iobase || up->port.mapbase) + uart_remove_one_port(&serial_txx9_reg, &up->port); + } + + uart_unregister_driver(&serial_txx9_reg); +} + +module_init(serial_txx9_init); +module_exit(serial_txx9_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("TX39/49 serial driver"); + +MODULE_ALIAS_CHARDEV_MAJOR(TXX9_TTY_MAJOR); |