diff options
author | 2015-08-04 12:17:53 -0700 | |
---|---|---|
committer | 2015-08-04 15:44:42 -0700 | |
commit | 9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 (patch) | |
tree | 1c9cafbcd35f783a87880a10f85d1a060db1a563 /kernel/drivers/tty/serial/sc16is7xx.c | |
parent | 98260f3884f4a202f9ca5eabed40b1354c489b29 (diff) |
Add the rt linux 4.1.3-rt3 as base
Import the rt linux 4.1.3-rt3 as OPNFV kvm base.
It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:
commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Sat Jul 25 12:13:34 2015 +0200
Prepare v4.1.3-rt3
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.
Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>
Diffstat (limited to 'kernel/drivers/tty/serial/sc16is7xx.c')
-rw-r--r-- | kernel/drivers/tty/serial/sc16is7xx.c | 1261 |
1 files changed, 1261 insertions, 0 deletions
diff --git a/kernel/drivers/tty/serial/sc16is7xx.c b/kernel/drivers/tty/serial/sc16is7xx.c new file mode 100644 index 000000000..468354ef7 --- /dev/null +++ b/kernel/drivers/tty/serial/sc16is7xx.c @@ -0,0 +1,1261 @@ +/* + * SC16IS7xx tty serial driver - Copyright (C) 2014 GridPoint + * Author: Jon Ringle <jringle@gridpoint.com> + * + * Based on max310x.c, by Alexander Shiyan <shc_work@mail.ru> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include <linux/bitops.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/gpio.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/regmap.h> +#include <linux/serial_core.h> +#include <linux/serial.h> +#include <linux/tty.h> +#include <linux/tty_flip.h> +#include <linux/uaccess.h> + +#define SC16IS7XX_NAME "sc16is7xx" + +/* SC16IS7XX register definitions */ +#define SC16IS7XX_RHR_REG (0x00) /* RX FIFO */ +#define SC16IS7XX_THR_REG (0x00) /* TX FIFO */ +#define SC16IS7XX_IER_REG (0x01) /* Interrupt enable */ +#define SC16IS7XX_IIR_REG (0x02) /* Interrupt Identification */ +#define SC16IS7XX_FCR_REG (0x02) /* FIFO control */ +#define SC16IS7XX_LCR_REG (0x03) /* Line Control */ +#define SC16IS7XX_MCR_REG (0x04) /* Modem Control */ +#define SC16IS7XX_LSR_REG (0x05) /* Line Status */ +#define SC16IS7XX_MSR_REG (0x06) /* Modem Status */ +#define SC16IS7XX_SPR_REG (0x07) /* Scratch Pad */ +#define SC16IS7XX_TXLVL_REG (0x08) /* TX FIFO level */ +#define SC16IS7XX_RXLVL_REG (0x09) /* RX FIFO level */ +#define SC16IS7XX_IODIR_REG (0x0a) /* I/O Direction + * - only on 75x/76x + */ +#define SC16IS7XX_IOSTATE_REG (0x0b) /* I/O State + * - only on 75x/76x + */ +#define SC16IS7XX_IOINTENA_REG (0x0c) /* I/O Interrupt Enable + * - only on 75x/76x + */ +#define SC16IS7XX_IOCONTROL_REG (0x0e) /* I/O Control + * - only on 75x/76x + */ +#define SC16IS7XX_EFCR_REG (0x0f) /* Extra Features Control */ + +/* TCR/TLR Register set: Only if ((MCR[2] == 1) && (EFR[4] == 1)) */ +#define SC16IS7XX_TCR_REG (0x06) /* Transmit control */ +#define SC16IS7XX_TLR_REG (0x07) /* Trigger level */ + +/* Special Register set: Only if ((LCR[7] == 1) && (LCR != 0xBF)) */ +#define SC16IS7XX_DLL_REG (0x00) /* Divisor Latch Low */ +#define SC16IS7XX_DLH_REG (0x01) /* Divisor Latch High */ + +/* Enhanced Register set: Only if (LCR == 0xBF) */ +#define SC16IS7XX_EFR_REG (0x02) /* Enhanced Features */ +#define SC16IS7XX_XON1_REG (0x04) /* Xon1 word */ +#define SC16IS7XX_XON2_REG (0x05) /* Xon2 word */ +#define SC16IS7XX_XOFF1_REG (0x06) /* Xoff1 word */ +#define SC16IS7XX_XOFF2_REG (0x07) /* Xoff2 word */ + +/* IER register bits */ +#define SC16IS7XX_IER_RDI_BIT (1 << 0) /* Enable RX data interrupt */ +#define SC16IS7XX_IER_THRI_BIT (1 << 1) /* Enable TX holding register + * interrupt */ +#define SC16IS7XX_IER_RLSI_BIT (1 << 2) /* Enable RX line status + * interrupt */ +#define SC16IS7XX_IER_MSI_BIT (1 << 3) /* Enable Modem status + * interrupt */ + +/* IER register bits - write only if (EFR[4] == 1) */ +#define SC16IS7XX_IER_SLEEP_BIT (1 << 4) /* Enable Sleep mode */ +#define SC16IS7XX_IER_XOFFI_BIT (1 << 5) /* Enable Xoff interrupt */ +#define SC16IS7XX_IER_RTSI_BIT (1 << 6) /* Enable nRTS interrupt */ +#define SC16IS7XX_IER_CTSI_BIT (1 << 7) /* Enable nCTS interrupt */ + +/* FCR register bits */ +#define SC16IS7XX_FCR_FIFO_BIT (1 << 0) /* Enable FIFO */ +#define SC16IS7XX_FCR_RXRESET_BIT (1 << 1) /* Reset RX FIFO */ +#define SC16IS7XX_FCR_TXRESET_BIT (1 << 2) /* Reset TX FIFO */ +#define SC16IS7XX_FCR_RXLVLL_BIT (1 << 6) /* RX Trigger level LSB */ +#define SC16IS7XX_FCR_RXLVLH_BIT (1 << 7) /* RX Trigger level MSB */ + +/* FCR register bits - write only if (EFR[4] == 1) */ +#define SC16IS7XX_FCR_TXLVLL_BIT (1 << 4) /* TX Trigger level LSB */ +#define SC16IS7XX_FCR_TXLVLH_BIT (1 << 5) /* TX Trigger level MSB */ + +/* IIR register bits */ +#define SC16IS7XX_IIR_NO_INT_BIT (1 << 0) /* No interrupts pending */ +#define SC16IS7XX_IIR_ID_MASK 0x3e /* Mask for the interrupt ID */ +#define SC16IS7XX_IIR_THRI_SRC 0x02 /* TX holding register empty */ +#define SC16IS7XX_IIR_RDI_SRC 0x04 /* RX data interrupt */ +#define SC16IS7XX_IIR_RLSE_SRC 0x06 /* RX line status error */ +#define SC16IS7XX_IIR_RTOI_SRC 0x0c /* RX time-out interrupt */ +#define SC16IS7XX_IIR_MSI_SRC 0x00 /* Modem status interrupt + * - only on 75x/76x + */ +#define SC16IS7XX_IIR_INPIN_SRC 0x30 /* Input pin change of state + * - only on 75x/76x + */ +#define SC16IS7XX_IIR_XOFFI_SRC 0x10 /* Received Xoff */ +#define SC16IS7XX_IIR_CTSRTS_SRC 0x20 /* nCTS,nRTS change of state + * from active (LOW) + * to inactive (HIGH) + */ +/* LCR register bits */ +#define SC16IS7XX_LCR_LENGTH0_BIT (1 << 0) /* Word length bit 0 */ +#define SC16IS7XX_LCR_LENGTH1_BIT (1 << 1) /* Word length bit 1 + * + * Word length bits table: + * 00 -> 5 bit words + * 01 -> 6 bit words + * 10 -> 7 bit words + * 11 -> 8 bit words + */ +#define SC16IS7XX_LCR_STOPLEN_BIT (1 << 2) /* STOP length bit + * + * STOP length bit table: + * 0 -> 1 stop bit + * 1 -> 1-1.5 stop bits if + * word length is 5, + * 2 stop bits otherwise + */ +#define SC16IS7XX_LCR_PARITY_BIT (1 << 3) /* Parity bit enable */ +#define SC16IS7XX_LCR_EVENPARITY_BIT (1 << 4) /* Even parity bit enable */ +#define SC16IS7XX_LCR_FORCEPARITY_BIT (1 << 5) /* 9-bit multidrop parity */ +#define SC16IS7XX_LCR_TXBREAK_BIT (1 << 6) /* TX break enable */ +#define SC16IS7XX_LCR_DLAB_BIT (1 << 7) /* Divisor Latch enable */ +#define SC16IS7XX_LCR_WORD_LEN_5 (0x00) +#define SC16IS7XX_LCR_WORD_LEN_6 (0x01) +#define SC16IS7XX_LCR_WORD_LEN_7 (0x02) +#define SC16IS7XX_LCR_WORD_LEN_8 (0x03) +#define SC16IS7XX_LCR_CONF_MODE_A SC16IS7XX_LCR_DLAB_BIT /* Special + * reg set */ +#define SC16IS7XX_LCR_CONF_MODE_B 0xBF /* Enhanced + * reg set */ + +/* MCR register bits */ +#define SC16IS7XX_MCR_DTR_BIT (1 << 0) /* DTR complement + * - only on 75x/76x + */ +#define SC16IS7XX_MCR_RTS_BIT (1 << 1) /* RTS complement */ +#define SC16IS7XX_MCR_TCRTLR_BIT (1 << 2) /* TCR/TLR register enable */ +#define SC16IS7XX_MCR_LOOP_BIT (1 << 4) /* Enable loopback test mode */ +#define SC16IS7XX_MCR_XONANY_BIT (1 << 5) /* Enable Xon Any + * - write enabled + * if (EFR[4] == 1) + */ +#define SC16IS7XX_MCR_IRDA_BIT (1 << 6) /* Enable IrDA mode + * - write enabled + * if (EFR[4] == 1) + */ +#define SC16IS7XX_MCR_CLKSEL_BIT (1 << 7) /* Divide clock by 4 + * - write enabled + * if (EFR[4] == 1) + */ + +/* LSR register bits */ +#define SC16IS7XX_LSR_DR_BIT (1 << 0) /* Receiver data ready */ +#define SC16IS7XX_LSR_OE_BIT (1 << 1) /* Overrun Error */ +#define SC16IS7XX_LSR_PE_BIT (1 << 2) /* Parity Error */ +#define SC16IS7XX_LSR_FE_BIT (1 << 3) /* Frame Error */ +#define SC16IS7XX_LSR_BI_BIT (1 << 4) /* Break Interrupt */ +#define SC16IS7XX_LSR_BRK_ERROR_MASK 0x1E /* BI, FE, PE, OE bits */ +#define SC16IS7XX_LSR_THRE_BIT (1 << 5) /* TX holding register empty */ +#define SC16IS7XX_LSR_TEMT_BIT (1 << 6) /* Transmitter empty */ +#define SC16IS7XX_LSR_FIFOE_BIT (1 << 7) /* Fifo Error */ + +/* MSR register bits */ +#define SC16IS7XX_MSR_DCTS_BIT (1 << 0) /* Delta CTS Clear To Send */ +#define SC16IS7XX_MSR_DDSR_BIT (1 << 1) /* Delta DSR Data Set Ready + * or (IO4) + * - only on 75x/76x + */ +#define SC16IS7XX_MSR_DRI_BIT (1 << 2) /* Delta RI Ring Indicator + * or (IO7) + * - only on 75x/76x + */ +#define SC16IS7XX_MSR_DCD_BIT (1 << 3) /* Delta CD Carrier Detect + * or (IO6) + * - only on 75x/76x + */ +#define SC16IS7XX_MSR_CTS_BIT (1 << 0) /* CTS */ +#define SC16IS7XX_MSR_DSR_BIT (1 << 1) /* DSR (IO4) + * - only on 75x/76x + */ +#define SC16IS7XX_MSR_RI_BIT (1 << 2) /* RI (IO7) + * - only on 75x/76x + */ +#define SC16IS7XX_MSR_CD_BIT (1 << 3) /* CD (IO6) + * - only on 75x/76x + */ +#define SC16IS7XX_MSR_DELTA_MASK 0x0F /* Any of the delta bits! */ + +/* + * TCR register bits + * TCR trigger levels are available from 0 to 60 characters with a granularity + * of four. + * The programmer must program the TCR such that TCR[3:0] > TCR[7:4]. There is + * no built-in hardware check to make sure this condition is met. Also, the TCR + * must be programmed with this condition before auto RTS or software flow + * control is enabled to avoid spurious operation of the device. + */ +#define SC16IS7XX_TCR_RX_HALT(words) ((((words) / 4) & 0x0f) << 0) +#define SC16IS7XX_TCR_RX_RESUME(words) ((((words) / 4) & 0x0f) << 4) + +/* + * TLR register bits + * If TLR[3:0] or TLR[7:4] are logical 0, the selectable trigger levels via the + * FIFO Control Register (FCR) are used for the transmit and receive FIFO + * trigger levels. Trigger levels from 4 characters to 60 characters are + * available with a granularity of four. + * + * When the trigger level setting in TLR is zero, the SC16IS740/750/760 uses the + * trigger level setting defined in FCR. If TLR has non-zero trigger level value + * the trigger level defined in FCR is discarded. This applies to both transmit + * FIFO and receive FIFO trigger level setting. + * + * When TLR is used for RX trigger level control, FCR[7:6] should be left at the + * default state, that is, '00'. + */ +#define SC16IS7XX_TLR_TX_TRIGGER(words) ((((words) / 4) & 0x0f) << 0) +#define SC16IS7XX_TLR_RX_TRIGGER(words) ((((words) / 4) & 0x0f) << 4) + +/* IOControl register bits (Only 750/760) */ +#define SC16IS7XX_IOCONTROL_LATCH_BIT (1 << 0) /* Enable input latching */ +#define SC16IS7XX_IOCONTROL_GPIO_BIT (1 << 1) /* Enable GPIO[7:4] */ +#define SC16IS7XX_IOCONTROL_SRESET_BIT (1 << 3) /* Software Reset */ + +/* EFCR register bits */ +#define SC16IS7XX_EFCR_9BIT_MODE_BIT (1 << 0) /* Enable 9-bit or Multidrop + * mode (RS485) */ +#define SC16IS7XX_EFCR_RXDISABLE_BIT (1 << 1) /* Disable receiver */ +#define SC16IS7XX_EFCR_TXDISABLE_BIT (1 << 2) /* Disable transmitter */ +#define SC16IS7XX_EFCR_AUTO_RS485_BIT (1 << 4) /* Auto RS485 RTS direction */ +#define SC16IS7XX_EFCR_RTS_INVERT_BIT (1 << 5) /* RTS output inversion */ +#define SC16IS7XX_EFCR_IRDA_MODE_BIT (1 << 7) /* IrDA mode + * 0 = rate upto 115.2 kbit/s + * - Only 750/760 + * 1 = rate upto 1.152 Mbit/s + * - Only 760 + */ + +/* EFR register bits */ +#define SC16IS7XX_EFR_AUTORTS_BIT (1 << 6) /* Auto RTS flow ctrl enable */ +#define SC16IS7XX_EFR_AUTOCTS_BIT (1 << 7) /* Auto CTS flow ctrl enable */ +#define SC16IS7XX_EFR_XOFF2_DETECT_BIT (1 << 5) /* Enable Xoff2 detection */ +#define SC16IS7XX_EFR_ENABLE_BIT (1 << 4) /* Enable enhanced functions + * and writing to IER[7:4], + * FCR[5:4], MCR[7:5] + */ +#define SC16IS7XX_EFR_SWFLOW3_BIT (1 << 3) /* SWFLOW bit 3 */ +#define SC16IS7XX_EFR_SWFLOW2_BIT (1 << 2) /* SWFLOW bit 2 + * + * SWFLOW bits 3 & 2 table: + * 00 -> no transmitter flow + * control + * 01 -> transmitter generates + * XON2 and XOFF2 + * 10 -> transmitter generates + * XON1 and XOFF1 + * 11 -> transmitter generates + * XON1, XON2, XOFF1 and + * XOFF2 + */ +#define SC16IS7XX_EFR_SWFLOW1_BIT (1 << 1) /* SWFLOW bit 2 */ +#define SC16IS7XX_EFR_SWFLOW0_BIT (1 << 0) /* SWFLOW bit 3 + * + * SWFLOW bits 3 & 2 table: + * 00 -> no received flow + * control + * 01 -> receiver compares + * XON2 and XOFF2 + * 10 -> receiver compares + * XON1 and XOFF1 + * 11 -> receiver compares + * XON1, XON2, XOFF1 and + * XOFF2 + */ + +/* Misc definitions */ +#define SC16IS7XX_FIFO_SIZE (64) +#define SC16IS7XX_REG_SHIFT 2 + +struct sc16is7xx_devtype { + char name[10]; + int nr_gpio; + int nr_uart; +}; + +struct sc16is7xx_one { + struct uart_port port; + struct work_struct tx_work; + struct work_struct md_work; +}; + +struct sc16is7xx_port { + struct uart_driver uart; + struct sc16is7xx_devtype *devtype; + struct regmap *regmap; + struct mutex mutex; + struct clk *clk; +#ifdef CONFIG_GPIOLIB + struct gpio_chip gpio; +#endif + unsigned char buf[SC16IS7XX_FIFO_SIZE]; + struct sc16is7xx_one p[0]; +}; + +#define to_sc16is7xx_one(p,e) ((container_of((p), struct sc16is7xx_one, e))) + +static u8 sc16is7xx_port_read(struct uart_port *port, u8 reg) +{ + struct sc16is7xx_port *s = dev_get_drvdata(port->dev); + unsigned int val = 0; + + regmap_read(s->regmap, + (reg << SC16IS7XX_REG_SHIFT) | port->line, &val); + + return val; +} + +static void sc16is7xx_port_write(struct uart_port *port, u8 reg, u8 val) +{ + struct sc16is7xx_port *s = dev_get_drvdata(port->dev); + + regmap_write(s->regmap, + (reg << SC16IS7XX_REG_SHIFT) | port->line, val); +} + +static void sc16is7xx_port_update(struct uart_port *port, u8 reg, + u8 mask, u8 val) +{ + struct sc16is7xx_port *s = dev_get_drvdata(port->dev); + + regmap_update_bits(s->regmap, + (reg << SC16IS7XX_REG_SHIFT) | port->line, + mask, val); +} + + +static void sc16is7xx_power(struct uart_port *port, int on) +{ + sc16is7xx_port_update(port, SC16IS7XX_IER_REG, + SC16IS7XX_IER_SLEEP_BIT, + on ? 0 : SC16IS7XX_IER_SLEEP_BIT); +} + +static const struct sc16is7xx_devtype sc16is74x_devtype = { + .name = "SC16IS74X", + .nr_gpio = 0, + .nr_uart = 1, +}; + +static const struct sc16is7xx_devtype sc16is750_devtype = { + .name = "SC16IS750", + .nr_gpio = 8, + .nr_uart = 1, +}; + +static const struct sc16is7xx_devtype sc16is752_devtype = { + .name = "SC16IS752", + .nr_gpio = 8, + .nr_uart = 2, +}; + +static const struct sc16is7xx_devtype sc16is760_devtype = { + .name = "SC16IS760", + .nr_gpio = 8, + .nr_uart = 1, +}; + +static const struct sc16is7xx_devtype sc16is762_devtype = { + .name = "SC16IS762", + .nr_gpio = 8, + .nr_uart = 2, +}; + +static bool sc16is7xx_regmap_volatile(struct device *dev, unsigned int reg) +{ + switch (reg >> SC16IS7XX_REG_SHIFT) { + case SC16IS7XX_RHR_REG: + case SC16IS7XX_IIR_REG: + case SC16IS7XX_LSR_REG: + case SC16IS7XX_MSR_REG: + case SC16IS7XX_TXLVL_REG: + case SC16IS7XX_RXLVL_REG: + case SC16IS7XX_IOSTATE_REG: + return true; + default: + break; + } + + return false; +} + +static bool sc16is7xx_regmap_precious(struct device *dev, unsigned int reg) +{ + switch (reg >> SC16IS7XX_REG_SHIFT) { + case SC16IS7XX_RHR_REG: + return true; + default: + break; + } + + return false; +} + +static int sc16is7xx_set_baud(struct uart_port *port, int baud) +{ + struct sc16is7xx_port *s = dev_get_drvdata(port->dev); + u8 lcr; + u8 prescaler = 0; + unsigned long clk = port->uartclk, div = clk / 16 / baud; + + if (div > 0xffff) { + prescaler = SC16IS7XX_MCR_CLKSEL_BIT; + div /= 4; + } + + lcr = sc16is7xx_port_read(port, SC16IS7XX_LCR_REG); + + /* Open the LCR divisors for configuration */ + sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, + SC16IS7XX_LCR_CONF_MODE_B); + + /* Enable enhanced features */ + regcache_cache_bypass(s->regmap, true); + sc16is7xx_port_write(port, SC16IS7XX_EFR_REG, + SC16IS7XX_EFR_ENABLE_BIT); + regcache_cache_bypass(s->regmap, false); + + /* Put LCR back to the normal mode */ + sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, lcr); + + sc16is7xx_port_update(port, SC16IS7XX_MCR_REG, + SC16IS7XX_MCR_CLKSEL_BIT, + prescaler); + + /* Open the LCR divisors for configuration */ + sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, + SC16IS7XX_LCR_CONF_MODE_A); + + /* Write the new divisor */ + regcache_cache_bypass(s->regmap, true); + sc16is7xx_port_write(port, SC16IS7XX_DLH_REG, div / 256); + sc16is7xx_port_write(port, SC16IS7XX_DLL_REG, div % 256); + regcache_cache_bypass(s->regmap, false); + + /* Put LCR back to the normal mode */ + sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, lcr); + + return DIV_ROUND_CLOSEST(clk / 16, div); +} + +static void sc16is7xx_handle_rx(struct uart_port *port, unsigned int rxlen, + unsigned int iir) +{ + struct sc16is7xx_port *s = dev_get_drvdata(port->dev); + unsigned int lsr = 0, ch, flag, bytes_read, i; + bool read_lsr = (iir == SC16IS7XX_IIR_RLSE_SRC) ? true : false; + + if (unlikely(rxlen >= sizeof(s->buf))) { + dev_warn_ratelimited(port->dev, + "Port %i: Possible RX FIFO overrun: %d\n", + port->line, rxlen); + port->icount.buf_overrun++; + /* Ensure sanity of RX level */ + rxlen = sizeof(s->buf); + } + + while (rxlen) { + /* Only read lsr if there are possible errors in FIFO */ + if (read_lsr) { + lsr = sc16is7xx_port_read(port, SC16IS7XX_LSR_REG); + if (!(lsr & SC16IS7XX_LSR_FIFOE_BIT)) + read_lsr = false; /* No errors left in FIFO */ + } else + lsr = 0; + + if (read_lsr) { + s->buf[0] = sc16is7xx_port_read(port, SC16IS7XX_RHR_REG); + bytes_read = 1; + } else { + regcache_cache_bypass(s->regmap, true); + regmap_raw_read(s->regmap, SC16IS7XX_RHR_REG, + s->buf, rxlen); + regcache_cache_bypass(s->regmap, false); + bytes_read = rxlen; + } + + lsr &= SC16IS7XX_LSR_BRK_ERROR_MASK; + + port->icount.rx++; + flag = TTY_NORMAL; + + if (unlikely(lsr)) { + if (lsr & SC16IS7XX_LSR_BI_BIT) { + port->icount.brk++; + if (uart_handle_break(port)) + continue; + } else if (lsr & SC16IS7XX_LSR_PE_BIT) + port->icount.parity++; + else if (lsr & SC16IS7XX_LSR_FE_BIT) + port->icount.frame++; + else if (lsr & SC16IS7XX_LSR_OE_BIT) + port->icount.overrun++; + + lsr &= port->read_status_mask; + if (lsr & SC16IS7XX_LSR_BI_BIT) + flag = TTY_BREAK; + else if (lsr & SC16IS7XX_LSR_PE_BIT) + flag = TTY_PARITY; + else if (lsr & SC16IS7XX_LSR_FE_BIT) + flag = TTY_FRAME; + else if (lsr & SC16IS7XX_LSR_OE_BIT) + flag = TTY_OVERRUN; + } + + for (i = 0; i < bytes_read; ++i) { + ch = s->buf[i]; + if (uart_handle_sysrq_char(port, ch)) + continue; + + if (lsr & port->ignore_status_mask) + continue; + + uart_insert_char(port, lsr, SC16IS7XX_LSR_OE_BIT, ch, + flag); + } + rxlen -= bytes_read; + } + + tty_flip_buffer_push(&port->state->port); +} + +static void sc16is7xx_handle_tx(struct uart_port *port) +{ + struct sc16is7xx_port *s = dev_get_drvdata(port->dev); + struct circ_buf *xmit = &port->state->xmit; + unsigned int txlen, to_send, i; + + if (unlikely(port->x_char)) { + sc16is7xx_port_write(port, SC16IS7XX_THR_REG, port->x_char); + port->icount.tx++; + port->x_char = 0; + return; + } + + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) + return; + + /* Get length of data pending in circular buffer */ + to_send = uart_circ_chars_pending(xmit); + if (likely(to_send)) { + /* Limit to size of TX FIFO */ + txlen = sc16is7xx_port_read(port, SC16IS7XX_TXLVL_REG); + to_send = (to_send > txlen) ? txlen : to_send; + + /* Add data to send */ + port->icount.tx += to_send; + + /* Convert to linear buffer */ + for (i = 0; i < to_send; ++i) { + s->buf[i] = xmit->buf[xmit->tail]; + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + } + regcache_cache_bypass(s->regmap, true); + regmap_raw_write(s->regmap, SC16IS7XX_THR_REG, s->buf, to_send); + regcache_cache_bypass(s->regmap, false); + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); +} + +static void sc16is7xx_port_irq(struct sc16is7xx_port *s, int portno) +{ + struct uart_port *port = &s->p[portno].port; + + do { + unsigned int iir, msr, rxlen; + + iir = sc16is7xx_port_read(port, SC16IS7XX_IIR_REG); + if (iir & SC16IS7XX_IIR_NO_INT_BIT) + break; + + iir &= SC16IS7XX_IIR_ID_MASK; + + switch (iir) { + case SC16IS7XX_IIR_RDI_SRC: + case SC16IS7XX_IIR_RLSE_SRC: + case SC16IS7XX_IIR_RTOI_SRC: + case SC16IS7XX_IIR_XOFFI_SRC: + rxlen = sc16is7xx_port_read(port, SC16IS7XX_RXLVL_REG); + if (rxlen) + sc16is7xx_handle_rx(port, rxlen, iir); + break; + + case SC16IS7XX_IIR_CTSRTS_SRC: + msr = sc16is7xx_port_read(port, SC16IS7XX_MSR_REG); + uart_handle_cts_change(port, + !!(msr & SC16IS7XX_MSR_CTS_BIT)); + break; + case SC16IS7XX_IIR_THRI_SRC: + mutex_lock(&s->mutex); + sc16is7xx_handle_tx(port); + mutex_unlock(&s->mutex); + break; + default: + dev_err_ratelimited(port->dev, + "Port %i: Unexpected interrupt: %x", + port->line, iir); + break; + } + } while (1); +} + +static irqreturn_t sc16is7xx_ist(int irq, void *dev_id) +{ + struct sc16is7xx_port *s = (struct sc16is7xx_port *)dev_id; + int i; + + for (i = 0; i < s->uart.nr; ++i) + sc16is7xx_port_irq(s, i); + + return IRQ_HANDLED; +} + +static void sc16is7xx_wq_proc(struct work_struct *ws) +{ + struct sc16is7xx_one *one = to_sc16is7xx_one(ws, tx_work); + struct sc16is7xx_port *s = dev_get_drvdata(one->port.dev); + + mutex_lock(&s->mutex); + sc16is7xx_handle_tx(&one->port); + mutex_unlock(&s->mutex); +} + +static void sc16is7xx_stop_tx(struct uart_port* port) +{ + struct sc16is7xx_one *one = to_sc16is7xx_one(port, port); + struct circ_buf *xmit = &one->port.state->xmit; + + /* handle rs485 */ + if (port->rs485.flags & SER_RS485_ENABLED) { + /* do nothing if current tx not yet completed */ + int lsr = sc16is7xx_port_read(port, SC16IS7XX_LSR_REG); + if (!(lsr & SC16IS7XX_LSR_TEMT_BIT)) + return; + + if (uart_circ_empty(xmit) && + (port->rs485.delay_rts_after_send > 0)) + mdelay(port->rs485.delay_rts_after_send); + } + + sc16is7xx_port_update(port, SC16IS7XX_IER_REG, + SC16IS7XX_IER_THRI_BIT, + 0); +} + +static void sc16is7xx_stop_rx(struct uart_port* port) +{ + struct sc16is7xx_one *one = to_sc16is7xx_one(port, port); + + one->port.read_status_mask &= ~SC16IS7XX_LSR_DR_BIT; + sc16is7xx_port_update(port, SC16IS7XX_IER_REG, + SC16IS7XX_LSR_DR_BIT, + 0); +} + +static void sc16is7xx_start_tx(struct uart_port *port) +{ + struct sc16is7xx_one *one = to_sc16is7xx_one(port, port); + + /* handle rs485 */ + if ((port->rs485.flags & SER_RS485_ENABLED) && + (port->rs485.delay_rts_before_send > 0)) { + mdelay(port->rs485.delay_rts_before_send); + } + + if (!work_pending(&one->tx_work)) + schedule_work(&one->tx_work); +} + +static unsigned int sc16is7xx_tx_empty(struct uart_port *port) +{ + unsigned int lvl, lsr; + + lvl = sc16is7xx_port_read(port, SC16IS7XX_TXLVL_REG); + lsr = sc16is7xx_port_read(port, SC16IS7XX_LSR_REG); + + return ((lsr & SC16IS7XX_LSR_THRE_BIT) && !lvl) ? TIOCSER_TEMT : 0; +} + +static unsigned int sc16is7xx_get_mctrl(struct uart_port *port) +{ + /* DCD and DSR are not wired and CTS/RTS is handled automatically + * so just indicate DSR and CAR asserted + */ + return TIOCM_DSR | TIOCM_CAR; +} + +static void sc16is7xx_md_proc(struct work_struct *ws) +{ + struct sc16is7xx_one *one = to_sc16is7xx_one(ws, md_work); + + sc16is7xx_port_update(&one->port, SC16IS7XX_MCR_REG, + SC16IS7XX_MCR_LOOP_BIT, + (one->port.mctrl & TIOCM_LOOP) ? + SC16IS7XX_MCR_LOOP_BIT : 0); +} + +static void sc16is7xx_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct sc16is7xx_one *one = to_sc16is7xx_one(port, port); + + schedule_work(&one->md_work); +} + +static void sc16is7xx_break_ctl(struct uart_port *port, int break_state) +{ + sc16is7xx_port_update(port, SC16IS7XX_LCR_REG, + SC16IS7XX_LCR_TXBREAK_BIT, + break_state ? SC16IS7XX_LCR_TXBREAK_BIT : 0); +} + +static void sc16is7xx_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old) +{ + struct sc16is7xx_port *s = dev_get_drvdata(port->dev); + unsigned int lcr, flow = 0; + int baud; + + /* Mask termios capabilities we don't support */ + termios->c_cflag &= ~CMSPAR; + + /* Word size */ + switch (termios->c_cflag & CSIZE) { + case CS5: + lcr = SC16IS7XX_LCR_WORD_LEN_5; + break; + case CS6: + lcr = SC16IS7XX_LCR_WORD_LEN_6; + break; + case CS7: + lcr = SC16IS7XX_LCR_WORD_LEN_7; + break; + case CS8: + lcr = SC16IS7XX_LCR_WORD_LEN_8; + break; + default: + lcr = SC16IS7XX_LCR_WORD_LEN_8; + termios->c_cflag &= ~CSIZE; + termios->c_cflag |= CS8; + break; + } + + /* Parity */ + if (termios->c_cflag & PARENB) { + lcr |= SC16IS7XX_LCR_PARITY_BIT; + if (!(termios->c_cflag & PARODD)) + lcr |= SC16IS7XX_LCR_EVENPARITY_BIT; + } + + /* Stop bits */ + if (termios->c_cflag & CSTOPB) + lcr |= SC16IS7XX_LCR_STOPLEN_BIT; /* 2 stops */ + + /* Set read status mask */ + port->read_status_mask = SC16IS7XX_LSR_OE_BIT; + if (termios->c_iflag & INPCK) + port->read_status_mask |= SC16IS7XX_LSR_PE_BIT | + SC16IS7XX_LSR_FE_BIT; + if (termios->c_iflag & (BRKINT | PARMRK)) + port->read_status_mask |= SC16IS7XX_LSR_BI_BIT; + + /* Set status ignore mask */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNBRK) + port->ignore_status_mask |= SC16IS7XX_LSR_BI_BIT; + if (!(termios->c_cflag & CREAD)) + port->ignore_status_mask |= SC16IS7XX_LSR_BRK_ERROR_MASK; + + sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, + SC16IS7XX_LCR_CONF_MODE_B); + + /* Configure flow control */ + regcache_cache_bypass(s->regmap, true); + sc16is7xx_port_write(port, SC16IS7XX_XON1_REG, termios->c_cc[VSTART]); + sc16is7xx_port_write(port, SC16IS7XX_XOFF1_REG, termios->c_cc[VSTOP]); + if (termios->c_cflag & CRTSCTS) + flow |= SC16IS7XX_EFR_AUTOCTS_BIT | + SC16IS7XX_EFR_AUTORTS_BIT; + if (termios->c_iflag & IXON) + flow |= SC16IS7XX_EFR_SWFLOW3_BIT; + if (termios->c_iflag & IXOFF) + flow |= SC16IS7XX_EFR_SWFLOW1_BIT; + + sc16is7xx_port_write(port, SC16IS7XX_EFR_REG, flow); + regcache_cache_bypass(s->regmap, false); + + /* Update LCR register */ + sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, lcr); + + /* Get baud rate generator configuration */ + baud = uart_get_baud_rate(port, termios, old, + port->uartclk / 16 / 4 / 0xffff, + port->uartclk / 16); + + /* Setup baudrate generator */ + baud = sc16is7xx_set_baud(port, baud); + + /* Update timeout according to new baud rate */ + uart_update_timeout(port, termios->c_cflag, baud); +} + +static int sc16is7xx_config_rs485(struct uart_port *port, + struct serial_rs485 *rs485) +{ + const u32 mask = SC16IS7XX_EFCR_AUTO_RS485_BIT | + SC16IS7XX_EFCR_RTS_INVERT_BIT; + u32 efcr = 0; + + if (rs485->flags & SER_RS485_ENABLED) { + bool rts_during_rx, rts_during_tx; + + rts_during_rx = rs485->flags & SER_RS485_RTS_AFTER_SEND; + rts_during_tx = rs485->flags & SER_RS485_RTS_ON_SEND; + + efcr |= SC16IS7XX_EFCR_AUTO_RS485_BIT; + + if (!rts_during_rx && rts_during_tx) + /* default */; + else if (rts_during_rx && !rts_during_tx) + efcr |= SC16IS7XX_EFCR_RTS_INVERT_BIT; + else + dev_err(port->dev, + "unsupported RTS signalling on_send:%d after_send:%d - exactly one of RS485 RTS flags should be set\n", + rts_during_tx, rts_during_rx); + } + + sc16is7xx_port_update(port, SC16IS7XX_EFCR_REG, mask, efcr); + + port->rs485 = *rs485; + + return 0; +} + +static int sc16is7xx_startup(struct uart_port *port) +{ + struct sc16is7xx_port *s = dev_get_drvdata(port->dev); + unsigned int val; + + sc16is7xx_power(port, 1); + + /* Reset FIFOs*/ + val = SC16IS7XX_FCR_RXRESET_BIT | SC16IS7XX_FCR_TXRESET_BIT; + sc16is7xx_port_write(port, SC16IS7XX_FCR_REG, val); + udelay(5); + sc16is7xx_port_write(port, SC16IS7XX_FCR_REG, + SC16IS7XX_FCR_FIFO_BIT); + + /* Enable EFR */ + sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, + SC16IS7XX_LCR_CONF_MODE_B); + + regcache_cache_bypass(s->regmap, true); + + /* Enable write access to enhanced features and internal clock div */ + sc16is7xx_port_write(port, SC16IS7XX_EFR_REG, + SC16IS7XX_EFR_ENABLE_BIT); + + /* Enable TCR/TLR */ + sc16is7xx_port_update(port, SC16IS7XX_MCR_REG, + SC16IS7XX_MCR_TCRTLR_BIT, + SC16IS7XX_MCR_TCRTLR_BIT); + + /* Configure flow control levels */ + /* Flow control halt level 48, resume level 24 */ + sc16is7xx_port_write(port, SC16IS7XX_TCR_REG, + SC16IS7XX_TCR_RX_RESUME(24) | + SC16IS7XX_TCR_RX_HALT(48)); + + regcache_cache_bypass(s->regmap, false); + + /* Now, initialize the UART */ + sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, SC16IS7XX_LCR_WORD_LEN_8); + + /* Enable the Rx and Tx FIFO */ + sc16is7xx_port_update(port, SC16IS7XX_EFCR_REG, + SC16IS7XX_EFCR_RXDISABLE_BIT | + SC16IS7XX_EFCR_TXDISABLE_BIT, + 0); + + /* Enable RX, TX, CTS change interrupts */ + val = SC16IS7XX_IER_RDI_BIT | SC16IS7XX_IER_THRI_BIT | + SC16IS7XX_IER_CTSI_BIT; + sc16is7xx_port_write(port, SC16IS7XX_IER_REG, val); + + return 0; +} + +static void sc16is7xx_shutdown(struct uart_port *port) +{ + /* Disable all interrupts */ + sc16is7xx_port_write(port, SC16IS7XX_IER_REG, 0); + /* Disable TX/RX */ + sc16is7xx_port_update(port, SC16IS7XX_EFCR_REG, + SC16IS7XX_EFCR_RXDISABLE_BIT | + SC16IS7XX_EFCR_TXDISABLE_BIT, + SC16IS7XX_EFCR_RXDISABLE_BIT | + SC16IS7XX_EFCR_TXDISABLE_BIT); + + sc16is7xx_power(port, 0); +} + +static const char *sc16is7xx_type(struct uart_port *port) +{ + struct sc16is7xx_port *s = dev_get_drvdata(port->dev); + + return (port->type == PORT_SC16IS7XX) ? s->devtype->name : NULL; +} + +static int sc16is7xx_request_port(struct uart_port *port) +{ + /* Do nothing */ + return 0; +} + +static void sc16is7xx_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) + port->type = PORT_SC16IS7XX; +} + +static int sc16is7xx_verify_port(struct uart_port *port, + struct serial_struct *s) +{ + if ((s->type != PORT_UNKNOWN) && (s->type != PORT_SC16IS7XX)) + return -EINVAL; + if (s->irq != port->irq) + return -EINVAL; + + return 0; +} + +static void sc16is7xx_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ + sc16is7xx_power(port, (state == UART_PM_STATE_ON) ? 1 : 0); +} + +static void sc16is7xx_null_void(struct uart_port *port) +{ + /* Do nothing */ +} + +static const struct uart_ops sc16is7xx_ops = { + .tx_empty = sc16is7xx_tx_empty, + .set_mctrl = sc16is7xx_set_mctrl, + .get_mctrl = sc16is7xx_get_mctrl, + .stop_tx = sc16is7xx_stop_tx, + .start_tx = sc16is7xx_start_tx, + .stop_rx = sc16is7xx_stop_rx, + .break_ctl = sc16is7xx_break_ctl, + .startup = sc16is7xx_startup, + .shutdown = sc16is7xx_shutdown, + .set_termios = sc16is7xx_set_termios, + .type = sc16is7xx_type, + .request_port = sc16is7xx_request_port, + .release_port = sc16is7xx_null_void, + .config_port = sc16is7xx_config_port, + .verify_port = sc16is7xx_verify_port, + .pm = sc16is7xx_pm, +}; + +#ifdef CONFIG_GPIOLIB +static int sc16is7xx_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + unsigned int val; + struct sc16is7xx_port *s = container_of(chip, struct sc16is7xx_port, + gpio); + struct uart_port *port = &s->p[0].port; + + val = sc16is7xx_port_read(port, SC16IS7XX_IOSTATE_REG); + + return !!(val & BIT(offset)); +} + +static void sc16is7xx_gpio_set(struct gpio_chip *chip, unsigned offset, int val) +{ + struct sc16is7xx_port *s = container_of(chip, struct sc16is7xx_port, + gpio); + struct uart_port *port = &s->p[0].port; + + sc16is7xx_port_update(port, SC16IS7XX_IOSTATE_REG, BIT(offset), + val ? BIT(offset) : 0); +} + +static int sc16is7xx_gpio_direction_input(struct gpio_chip *chip, + unsigned offset) +{ + struct sc16is7xx_port *s = container_of(chip, struct sc16is7xx_port, + gpio); + struct uart_port *port = &s->p[0].port; + + sc16is7xx_port_update(port, SC16IS7XX_IODIR_REG, BIT(offset), 0); + + return 0; +} + +static int sc16is7xx_gpio_direction_output(struct gpio_chip *chip, + unsigned offset, int val) +{ + struct sc16is7xx_port *s = container_of(chip, struct sc16is7xx_port, + gpio); + struct uart_port *port = &s->p[0].port; + + sc16is7xx_port_update(port, SC16IS7XX_IOSTATE_REG, BIT(offset), + val ? BIT(offset) : 0); + sc16is7xx_port_update(port, SC16IS7XX_IODIR_REG, BIT(offset), + BIT(offset)); + + return 0; +} +#endif + +static int sc16is7xx_probe(struct device *dev, + struct sc16is7xx_devtype *devtype, + struct regmap *regmap, int irq, unsigned long flags) +{ + unsigned long freq, *pfreq = dev_get_platdata(dev); + int i, ret; + struct sc16is7xx_port *s; + + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + /* Alloc port structure */ + s = devm_kzalloc(dev, sizeof(*s) + + sizeof(struct sc16is7xx_one) * devtype->nr_uart, + GFP_KERNEL); + if (!s) { + dev_err(dev, "Error allocating port structure\n"); + return -ENOMEM; + } + + s->clk = devm_clk_get(dev, NULL); + if (IS_ERR(s->clk)) { + if (pfreq) + freq = *pfreq; + else + return PTR_ERR(s->clk); + } else { + clk_prepare_enable(s->clk); + freq = clk_get_rate(s->clk); + } + + s->regmap = regmap; + s->devtype = devtype; + dev_set_drvdata(dev, s); + + /* Register UART driver */ + s->uart.owner = THIS_MODULE; + s->uart.dev_name = "ttySC"; + s->uart.nr = devtype->nr_uart; + ret = uart_register_driver(&s->uart); + if (ret) { + dev_err(dev, "Registering UART driver failed\n"); + goto out_clk; + } + +#ifdef CONFIG_GPIOLIB + if (devtype->nr_gpio) { + /* Setup GPIO cotroller */ + s->gpio.owner = THIS_MODULE; + s->gpio.dev = dev; + s->gpio.label = dev_name(dev); + s->gpio.direction_input = sc16is7xx_gpio_direction_input; + s->gpio.get = sc16is7xx_gpio_get; + s->gpio.direction_output = sc16is7xx_gpio_direction_output; + s->gpio.set = sc16is7xx_gpio_set; + s->gpio.base = -1; + s->gpio.ngpio = devtype->nr_gpio; + s->gpio.can_sleep = 1; + ret = gpiochip_add(&s->gpio); + if (ret) + goto out_uart; + } +#endif + + mutex_init(&s->mutex); + + for (i = 0; i < devtype->nr_uart; ++i) { + /* Initialize port data */ + s->p[i].port.line = i; + s->p[i].port.dev = dev; + s->p[i].port.irq = irq; + s->p[i].port.type = PORT_SC16IS7XX; + s->p[i].port.fifosize = SC16IS7XX_FIFO_SIZE; + s->p[i].port.flags = UPF_FIXED_TYPE | UPF_LOW_LATENCY; + s->p[i].port.iotype = UPIO_PORT; + s->p[i].port.uartclk = freq; + s->p[i].port.rs485_config = sc16is7xx_config_rs485; + s->p[i].port.ops = &sc16is7xx_ops; + /* Disable all interrupts */ + sc16is7xx_port_write(&s->p[i].port, SC16IS7XX_IER_REG, 0); + /* Disable TX/RX */ + sc16is7xx_port_write(&s->p[i].port, SC16IS7XX_EFCR_REG, + SC16IS7XX_EFCR_RXDISABLE_BIT | + SC16IS7XX_EFCR_TXDISABLE_BIT); + /* Initialize queue for start TX */ + INIT_WORK(&s->p[i].tx_work, sc16is7xx_wq_proc); + /* Initialize queue for changing mode */ + INIT_WORK(&s->p[i].md_work, sc16is7xx_md_proc); + /* Register port */ + uart_add_one_port(&s->uart, &s->p[i].port); + /* Go to suspend mode */ + sc16is7xx_power(&s->p[i].port, 0); + } + + /* Setup interrupt */ + ret = devm_request_threaded_irq(dev, irq, NULL, sc16is7xx_ist, + IRQF_ONESHOT | flags, dev_name(dev), s); + if (!ret) + return 0; + + for (i = 0; i < s->uart.nr; i++) + uart_remove_one_port(&s->uart, &s->p[i].port); + + mutex_destroy(&s->mutex); + +#ifdef CONFIG_GPIOLIB + if (devtype->nr_gpio) + gpiochip_remove(&s->gpio); + +out_uart: +#endif + uart_unregister_driver(&s->uart); + +out_clk: + if (!IS_ERR(s->clk)) + clk_disable_unprepare(s->clk); + + return ret; +} + +static int sc16is7xx_remove(struct device *dev) +{ + struct sc16is7xx_port *s = dev_get_drvdata(dev); + int i; + +#ifdef CONFIG_GPIOLIB + if (s->devtype->nr_gpio) + gpiochip_remove(&s->gpio); +#endif + + for (i = 0; i < s->uart.nr; i++) { + cancel_work_sync(&s->p[i].tx_work); + cancel_work_sync(&s->p[i].md_work); + uart_remove_one_port(&s->uart, &s->p[i].port); + sc16is7xx_power(&s->p[i].port, 0); + } + + mutex_destroy(&s->mutex); + uart_unregister_driver(&s->uart); + if (!IS_ERR(s->clk)) + clk_disable_unprepare(s->clk); + + return 0; +} + +static const struct of_device_id __maybe_unused sc16is7xx_dt_ids[] = { + { .compatible = "nxp,sc16is740", .data = &sc16is74x_devtype, }, + { .compatible = "nxp,sc16is741", .data = &sc16is74x_devtype, }, + { .compatible = "nxp,sc16is750", .data = &sc16is750_devtype, }, + { .compatible = "nxp,sc16is752", .data = &sc16is752_devtype, }, + { .compatible = "nxp,sc16is760", .data = &sc16is760_devtype, }, + { .compatible = "nxp,sc16is762", .data = &sc16is762_devtype, }, + { } +}; +MODULE_DEVICE_TABLE(of, sc16is7xx_dt_ids); + +static struct regmap_config regcfg = { + .reg_bits = 7, + .pad_bits = 1, + .val_bits = 8, + .cache_type = REGCACHE_RBTREE, + .volatile_reg = sc16is7xx_regmap_volatile, + .precious_reg = sc16is7xx_regmap_precious, +}; + +static int sc16is7xx_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct sc16is7xx_devtype *devtype; + unsigned long flags = 0; + struct regmap *regmap; + + if (i2c->dev.of_node) { + const struct of_device_id *of_id = + of_match_device(sc16is7xx_dt_ids, &i2c->dev); + + devtype = (struct sc16is7xx_devtype *)of_id->data; + } else { + devtype = (struct sc16is7xx_devtype *)id->driver_data; + flags = IRQF_TRIGGER_FALLING; + } + + regcfg.max_register = (0xf << SC16IS7XX_REG_SHIFT) | + (devtype->nr_uart - 1); + regmap = devm_regmap_init_i2c(i2c, ®cfg); + + return sc16is7xx_probe(&i2c->dev, devtype, regmap, i2c->irq, flags); +} + +static int sc16is7xx_i2c_remove(struct i2c_client *client) +{ + return sc16is7xx_remove(&client->dev); +} + +static const struct i2c_device_id sc16is7xx_i2c_id_table[] = { + { "sc16is74x", (kernel_ulong_t)&sc16is74x_devtype, }, + { "sc16is750", (kernel_ulong_t)&sc16is750_devtype, }, + { "sc16is752", (kernel_ulong_t)&sc16is752_devtype, }, + { "sc16is760", (kernel_ulong_t)&sc16is760_devtype, }, + { "sc16is762", (kernel_ulong_t)&sc16is762_devtype, }, + { } +}; +MODULE_DEVICE_TABLE(i2c, sc16is7xx_i2c_id_table); + +static struct i2c_driver sc16is7xx_i2c_uart_driver = { + .driver = { + .name = SC16IS7XX_NAME, + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(sc16is7xx_dt_ids), + }, + .probe = sc16is7xx_i2c_probe, + .remove = sc16is7xx_i2c_remove, + .id_table = sc16is7xx_i2c_id_table, +}; +module_i2c_driver(sc16is7xx_i2c_uart_driver); +MODULE_ALIAS("i2c:sc16is7xx"); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Jon Ringle <jringle@gridpoint.com>"); +MODULE_DESCRIPTION("SC16IS7XX serial driver"); |