diff options
author | 2015-08-04 12:17:53 -0700 | |
---|---|---|
committer | 2015-08-04 15:44:42 -0700 | |
commit | 9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 (patch) | |
tree | 1c9cafbcd35f783a87880a10f85d1a060db1a563 /kernel/drivers/tty/serial/fsl_lpuart.c | |
parent | 98260f3884f4a202f9ca5eabed40b1354c489b29 (diff) |
Add the rt linux 4.1.3-rt3 as base
Import the rt linux 4.1.3-rt3 as OPNFV kvm base.
It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:
commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Sat Jul 25 12:13:34 2015 +0200
Prepare v4.1.3-rt3
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.
Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>
Diffstat (limited to 'kernel/drivers/tty/serial/fsl_lpuart.c')
-rw-r--r-- | kernel/drivers/tty/serial/fsl_lpuart.c | 1944 |
1 files changed, 1944 insertions, 0 deletions
diff --git a/kernel/drivers/tty/serial/fsl_lpuart.c b/kernel/drivers/tty/serial/fsl_lpuart.c new file mode 100644 index 000000000..08ce76f4f --- /dev/null +++ b/kernel/drivers/tty/serial/fsl_lpuart.c @@ -0,0 +1,1944 @@ +/* + * Freescale lpuart serial port driver + * + * Copyright 2012-2014 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#if defined(CONFIG_SERIAL_FSL_LPUART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include <linux/clk.h> +#include <linux/console.h> +#include <linux/dma-mapping.h> +#include <linux/dmaengine.h> +#include <linux/dmapool.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_dma.h> +#include <linux/serial_core.h> +#include <linux/slab.h> +#include <linux/tty_flip.h> + +/* All registers are 8-bit width */ +#define UARTBDH 0x00 +#define UARTBDL 0x01 +#define UARTCR1 0x02 +#define UARTCR2 0x03 +#define UARTSR1 0x04 +#define UARTCR3 0x06 +#define UARTDR 0x07 +#define UARTCR4 0x0a +#define UARTCR5 0x0b +#define UARTMODEM 0x0d +#define UARTPFIFO 0x10 +#define UARTCFIFO 0x11 +#define UARTSFIFO 0x12 +#define UARTTWFIFO 0x13 +#define UARTTCFIFO 0x14 +#define UARTRWFIFO 0x15 + +#define UARTBDH_LBKDIE 0x80 +#define UARTBDH_RXEDGIE 0x40 +#define UARTBDH_SBR_MASK 0x1f + +#define UARTCR1_LOOPS 0x80 +#define UARTCR1_RSRC 0x20 +#define UARTCR1_M 0x10 +#define UARTCR1_WAKE 0x08 +#define UARTCR1_ILT 0x04 +#define UARTCR1_PE 0x02 +#define UARTCR1_PT 0x01 + +#define UARTCR2_TIE 0x80 +#define UARTCR2_TCIE 0x40 +#define UARTCR2_RIE 0x20 +#define UARTCR2_ILIE 0x10 +#define UARTCR2_TE 0x08 +#define UARTCR2_RE 0x04 +#define UARTCR2_RWU 0x02 +#define UARTCR2_SBK 0x01 + +#define UARTSR1_TDRE 0x80 +#define UARTSR1_TC 0x40 +#define UARTSR1_RDRF 0x20 +#define UARTSR1_IDLE 0x10 +#define UARTSR1_OR 0x08 +#define UARTSR1_NF 0x04 +#define UARTSR1_FE 0x02 +#define UARTSR1_PE 0x01 + +#define UARTCR3_R8 0x80 +#define UARTCR3_T8 0x40 +#define UARTCR3_TXDIR 0x20 +#define UARTCR3_TXINV 0x10 +#define UARTCR3_ORIE 0x08 +#define UARTCR3_NEIE 0x04 +#define UARTCR3_FEIE 0x02 +#define UARTCR3_PEIE 0x01 + +#define UARTCR4_MAEN1 0x80 +#define UARTCR4_MAEN2 0x40 +#define UARTCR4_M10 0x20 +#define UARTCR4_BRFA_MASK 0x1f +#define UARTCR4_BRFA_OFF 0 + +#define UARTCR5_TDMAS 0x80 +#define UARTCR5_RDMAS 0x20 + +#define UARTMODEM_RXRTSE 0x08 +#define UARTMODEM_TXRTSPOL 0x04 +#define UARTMODEM_TXRTSE 0x02 +#define UARTMODEM_TXCTSE 0x01 + +#define UARTPFIFO_TXFE 0x80 +#define UARTPFIFO_FIFOSIZE_MASK 0x7 +#define UARTPFIFO_TXSIZE_OFF 4 +#define UARTPFIFO_RXFE 0x08 +#define UARTPFIFO_RXSIZE_OFF 0 + +#define UARTCFIFO_TXFLUSH 0x80 +#define UARTCFIFO_RXFLUSH 0x40 +#define UARTCFIFO_RXOFE 0x04 +#define UARTCFIFO_TXOFE 0x02 +#define UARTCFIFO_RXUFE 0x01 + +#define UARTSFIFO_TXEMPT 0x80 +#define UARTSFIFO_RXEMPT 0x40 +#define UARTSFIFO_RXOF 0x04 +#define UARTSFIFO_TXOF 0x02 +#define UARTSFIFO_RXUF 0x01 + +/* 32-bit register defination */ +#define UARTBAUD 0x00 +#define UARTSTAT 0x04 +#define UARTCTRL 0x08 +#define UARTDATA 0x0C +#define UARTMATCH 0x10 +#define UARTMODIR 0x14 +#define UARTFIFO 0x18 +#define UARTWATER 0x1c + +#define UARTBAUD_MAEN1 0x80000000 +#define UARTBAUD_MAEN2 0x40000000 +#define UARTBAUD_M10 0x20000000 +#define UARTBAUD_TDMAE 0x00800000 +#define UARTBAUD_RDMAE 0x00200000 +#define UARTBAUD_MATCFG 0x00400000 +#define UARTBAUD_BOTHEDGE 0x00020000 +#define UARTBAUD_RESYNCDIS 0x00010000 +#define UARTBAUD_LBKDIE 0x00008000 +#define UARTBAUD_RXEDGIE 0x00004000 +#define UARTBAUD_SBNS 0x00002000 +#define UARTBAUD_SBR 0x00000000 +#define UARTBAUD_SBR_MASK 0x1fff + +#define UARTSTAT_LBKDIF 0x80000000 +#define UARTSTAT_RXEDGIF 0x40000000 +#define UARTSTAT_MSBF 0x20000000 +#define UARTSTAT_RXINV 0x10000000 +#define UARTSTAT_RWUID 0x08000000 +#define UARTSTAT_BRK13 0x04000000 +#define UARTSTAT_LBKDE 0x02000000 +#define UARTSTAT_RAF 0x01000000 +#define UARTSTAT_TDRE 0x00800000 +#define UARTSTAT_TC 0x00400000 +#define UARTSTAT_RDRF 0x00200000 +#define UARTSTAT_IDLE 0x00100000 +#define UARTSTAT_OR 0x00080000 +#define UARTSTAT_NF 0x00040000 +#define UARTSTAT_FE 0x00020000 +#define UARTSTAT_PE 0x00010000 +#define UARTSTAT_MA1F 0x00008000 +#define UARTSTAT_M21F 0x00004000 + +#define UARTCTRL_R8T9 0x80000000 +#define UARTCTRL_R9T8 0x40000000 +#define UARTCTRL_TXDIR 0x20000000 +#define UARTCTRL_TXINV 0x10000000 +#define UARTCTRL_ORIE 0x08000000 +#define UARTCTRL_NEIE 0x04000000 +#define UARTCTRL_FEIE 0x02000000 +#define UARTCTRL_PEIE 0x01000000 +#define UARTCTRL_TIE 0x00800000 +#define UARTCTRL_TCIE 0x00400000 +#define UARTCTRL_RIE 0x00200000 +#define UARTCTRL_ILIE 0x00100000 +#define UARTCTRL_TE 0x00080000 +#define UARTCTRL_RE 0x00040000 +#define UARTCTRL_RWU 0x00020000 +#define UARTCTRL_SBK 0x00010000 +#define UARTCTRL_MA1IE 0x00008000 +#define UARTCTRL_MA2IE 0x00004000 +#define UARTCTRL_IDLECFG 0x00000100 +#define UARTCTRL_LOOPS 0x00000080 +#define UARTCTRL_DOZEEN 0x00000040 +#define UARTCTRL_RSRC 0x00000020 +#define UARTCTRL_M 0x00000010 +#define UARTCTRL_WAKE 0x00000008 +#define UARTCTRL_ILT 0x00000004 +#define UARTCTRL_PE 0x00000002 +#define UARTCTRL_PT 0x00000001 + +#define UARTDATA_NOISY 0x00008000 +#define UARTDATA_PARITYE 0x00004000 +#define UARTDATA_FRETSC 0x00002000 +#define UARTDATA_RXEMPT 0x00001000 +#define UARTDATA_IDLINE 0x00000800 +#define UARTDATA_MASK 0x3ff + +#define UARTMODIR_IREN 0x00020000 +#define UARTMODIR_TXCTSSRC 0x00000020 +#define UARTMODIR_TXCTSC 0x00000010 +#define UARTMODIR_RXRTSE 0x00000008 +#define UARTMODIR_TXRTSPOL 0x00000004 +#define UARTMODIR_TXRTSE 0x00000002 +#define UARTMODIR_TXCTSE 0x00000001 + +#define UARTFIFO_TXEMPT 0x00800000 +#define UARTFIFO_RXEMPT 0x00400000 +#define UARTFIFO_TXOF 0x00020000 +#define UARTFIFO_RXUF 0x00010000 +#define UARTFIFO_TXFLUSH 0x00008000 +#define UARTFIFO_RXFLUSH 0x00004000 +#define UARTFIFO_TXOFE 0x00000200 +#define UARTFIFO_RXUFE 0x00000100 +#define UARTFIFO_TXFE 0x00000080 +#define UARTFIFO_FIFOSIZE_MASK 0x7 +#define UARTFIFO_TXSIZE_OFF 4 +#define UARTFIFO_RXFE 0x00000008 +#define UARTFIFO_RXSIZE_OFF 0 + +#define UARTWATER_COUNT_MASK 0xff +#define UARTWATER_TXCNT_OFF 8 +#define UARTWATER_RXCNT_OFF 24 +#define UARTWATER_WATER_MASK 0xff +#define UARTWATER_TXWATER_OFF 0 +#define UARTWATER_RXWATER_OFF 16 + +#define FSL_UART_RX_DMA_BUFFER_SIZE 64 + +#define DRIVER_NAME "fsl-lpuart" +#define DEV_NAME "ttyLP" +#define UART_NR 6 + +struct lpuart_port { + struct uart_port port; + struct clk *clk; + unsigned int txfifo_size; + unsigned int rxfifo_size; + bool lpuart32; + + bool lpuart_dma_tx_use; + bool lpuart_dma_rx_use; + struct dma_chan *dma_tx_chan; + struct dma_chan *dma_rx_chan; + struct dma_async_tx_descriptor *dma_tx_desc; + struct dma_async_tx_descriptor *dma_rx_desc; + dma_addr_t dma_tx_buf_bus; + dma_addr_t dma_rx_buf_bus; + dma_cookie_t dma_tx_cookie; + dma_cookie_t dma_rx_cookie; + unsigned char *dma_tx_buf_virt; + unsigned char *dma_rx_buf_virt; + unsigned int dma_tx_bytes; + unsigned int dma_rx_bytes; + int dma_tx_in_progress; + int dma_rx_in_progress; + unsigned int dma_rx_timeout; + struct timer_list lpuart_timer; +}; + +static const struct of_device_id lpuart_dt_ids[] = { + { + .compatible = "fsl,vf610-lpuart", + }, + { + .compatible = "fsl,ls1021a-lpuart", + }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, lpuart_dt_ids); + +/* Forward declare this for the dma callbacks*/ +static void lpuart_dma_tx_complete(void *arg); +static void lpuart_dma_rx_complete(void *arg); + +static u32 lpuart32_read(void __iomem *addr) +{ + return ioread32be(addr); +} + +static void lpuart32_write(u32 val, void __iomem *addr) +{ + iowrite32be(val, addr); +} + +static void lpuart_stop_tx(struct uart_port *port) +{ + unsigned char temp; + + temp = readb(port->membase + UARTCR2); + temp &= ~(UARTCR2_TIE | UARTCR2_TCIE); + writeb(temp, port->membase + UARTCR2); +} + +static void lpuart32_stop_tx(struct uart_port *port) +{ + unsigned long temp; + + temp = lpuart32_read(port->membase + UARTCTRL); + temp &= ~(UARTCTRL_TIE | UARTCTRL_TCIE); + lpuart32_write(temp, port->membase + UARTCTRL); +} + +static void lpuart_stop_rx(struct uart_port *port) +{ + unsigned char temp; + + temp = readb(port->membase + UARTCR2); + writeb(temp & ~UARTCR2_RE, port->membase + UARTCR2); +} + +static void lpuart32_stop_rx(struct uart_port *port) +{ + unsigned long temp; + + temp = lpuart32_read(port->membase + UARTCTRL); + lpuart32_write(temp & ~UARTCTRL_RE, port->membase + UARTCTRL); +} + +static void lpuart_copy_rx_to_tty(struct lpuart_port *sport, + struct tty_port *tty, int count) +{ + int copied; + + sport->port.icount.rx += count; + + if (!tty) { + dev_err(sport->port.dev, "No tty port\n"); + return; + } + + dma_sync_single_for_cpu(sport->port.dev, sport->dma_rx_buf_bus, + FSL_UART_RX_DMA_BUFFER_SIZE, DMA_FROM_DEVICE); + copied = tty_insert_flip_string(tty, + ((unsigned char *)(sport->dma_rx_buf_virt)), count); + + if (copied != count) { + WARN_ON(1); + dev_err(sport->port.dev, "RxData copy to tty layer failed\n"); + } + + dma_sync_single_for_device(sport->port.dev, sport->dma_rx_buf_bus, + FSL_UART_RX_DMA_BUFFER_SIZE, DMA_TO_DEVICE); +} + +static void lpuart_pio_tx(struct lpuart_port *sport) +{ + struct circ_buf *xmit = &sport->port.state->xmit; + unsigned long flags; + + spin_lock_irqsave(&sport->port.lock, flags); + + while (!uart_circ_empty(xmit) && + readb(sport->port.membase + UARTTCFIFO) < sport->txfifo_size) { + writeb(xmit->buf[xmit->tail], sport->port.membase + UARTDR); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + sport->port.icount.tx++; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&sport->port); + + if (uart_circ_empty(xmit)) + writeb(readb(sport->port.membase + UARTCR5) | UARTCR5_TDMAS, + sport->port.membase + UARTCR5); + + spin_unlock_irqrestore(&sport->port.lock, flags); +} + +static int lpuart_dma_tx(struct lpuart_port *sport, unsigned long count) +{ + struct circ_buf *xmit = &sport->port.state->xmit; + dma_addr_t tx_bus_addr; + + dma_sync_single_for_device(sport->port.dev, sport->dma_tx_buf_bus, + UART_XMIT_SIZE, DMA_TO_DEVICE); + sport->dma_tx_bytes = count & ~(sport->txfifo_size - 1); + tx_bus_addr = sport->dma_tx_buf_bus + xmit->tail; + sport->dma_tx_desc = dmaengine_prep_slave_single(sport->dma_tx_chan, + tx_bus_addr, sport->dma_tx_bytes, + DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT); + + if (!sport->dma_tx_desc) { + dev_err(sport->port.dev, "Not able to get desc for tx\n"); + return -EIO; + } + + sport->dma_tx_desc->callback = lpuart_dma_tx_complete; + sport->dma_tx_desc->callback_param = sport; + sport->dma_tx_in_progress = 1; + sport->dma_tx_cookie = dmaengine_submit(sport->dma_tx_desc); + dma_async_issue_pending(sport->dma_tx_chan); + + return 0; +} + +static void lpuart_prepare_tx(struct lpuart_port *sport) +{ + struct circ_buf *xmit = &sport->port.state->xmit; + unsigned long count = CIRC_CNT_TO_END(xmit->head, + xmit->tail, UART_XMIT_SIZE); + + if (!count) + return; + + if (count < sport->txfifo_size) + writeb(readb(sport->port.membase + UARTCR5) & ~UARTCR5_TDMAS, + sport->port.membase + UARTCR5); + else { + writeb(readb(sport->port.membase + UARTCR5) | UARTCR5_TDMAS, + sport->port.membase + UARTCR5); + lpuart_dma_tx(sport, count); + } +} + +static void lpuart_dma_tx_complete(void *arg) +{ + struct lpuart_port *sport = arg; + struct circ_buf *xmit = &sport->port.state->xmit; + unsigned long flags; + + async_tx_ack(sport->dma_tx_desc); + + spin_lock_irqsave(&sport->port.lock, flags); + + xmit->tail = (xmit->tail + sport->dma_tx_bytes) & (UART_XMIT_SIZE - 1); + sport->dma_tx_in_progress = 0; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&sport->port); + + lpuart_prepare_tx(sport); + + spin_unlock_irqrestore(&sport->port.lock, flags); +} + +static int lpuart_dma_rx(struct lpuart_port *sport) +{ + dma_sync_single_for_device(sport->port.dev, sport->dma_rx_buf_bus, + FSL_UART_RX_DMA_BUFFER_SIZE, DMA_TO_DEVICE); + sport->dma_rx_desc = dmaengine_prep_slave_single(sport->dma_rx_chan, + sport->dma_rx_buf_bus, FSL_UART_RX_DMA_BUFFER_SIZE, + DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT); + + if (!sport->dma_rx_desc) { + dev_err(sport->port.dev, "Not able to get desc for rx\n"); + return -EIO; + } + + sport->dma_rx_desc->callback = lpuart_dma_rx_complete; + sport->dma_rx_desc->callback_param = sport; + sport->dma_rx_in_progress = 1; + sport->dma_rx_cookie = dmaengine_submit(sport->dma_rx_desc); + dma_async_issue_pending(sport->dma_rx_chan); + + return 0; +} + +static void lpuart_flush_buffer(struct uart_port *port) +{ + struct lpuart_port *sport = container_of(port, struct lpuart_port, port); + if (sport->lpuart_dma_tx_use) { + dmaengine_terminate_all(sport->dma_tx_chan); + sport->dma_tx_in_progress = 0; + } +} + +static void lpuart_dma_rx_complete(void *arg) +{ + struct lpuart_port *sport = arg; + struct tty_port *port = &sport->port.state->port; + unsigned long flags; + + async_tx_ack(sport->dma_rx_desc); + mod_timer(&sport->lpuart_timer, jiffies + sport->dma_rx_timeout); + + spin_lock_irqsave(&sport->port.lock, flags); + + sport->dma_rx_in_progress = 0; + lpuart_copy_rx_to_tty(sport, port, FSL_UART_RX_DMA_BUFFER_SIZE); + tty_flip_buffer_push(port); + lpuart_dma_rx(sport); + + spin_unlock_irqrestore(&sport->port.lock, flags); +} + +static void lpuart_timer_func(unsigned long data) +{ + struct lpuart_port *sport = (struct lpuart_port *)data; + struct tty_port *port = &sport->port.state->port; + struct dma_tx_state state; + unsigned long flags; + unsigned char temp; + int count; + + del_timer(&sport->lpuart_timer); + dmaengine_pause(sport->dma_rx_chan); + dmaengine_tx_status(sport->dma_rx_chan, sport->dma_rx_cookie, &state); + dmaengine_terminate_all(sport->dma_rx_chan); + count = FSL_UART_RX_DMA_BUFFER_SIZE - state.residue; + async_tx_ack(sport->dma_rx_desc); + + spin_lock_irqsave(&sport->port.lock, flags); + + sport->dma_rx_in_progress = 0; + lpuart_copy_rx_to_tty(sport, port, count); + tty_flip_buffer_push(port); + temp = readb(sport->port.membase + UARTCR5); + writeb(temp & ~UARTCR5_RDMAS, sport->port.membase + UARTCR5); + + spin_unlock_irqrestore(&sport->port.lock, flags); +} + +static inline void lpuart_prepare_rx(struct lpuart_port *sport) +{ + unsigned long flags; + unsigned char temp; + + spin_lock_irqsave(&sport->port.lock, flags); + + sport->lpuart_timer.expires = jiffies + sport->dma_rx_timeout; + add_timer(&sport->lpuart_timer); + + lpuart_dma_rx(sport); + temp = readb(sport->port.membase + UARTCR5); + writeb(temp | UARTCR5_RDMAS, sport->port.membase + UARTCR5); + + spin_unlock_irqrestore(&sport->port.lock, flags); +} + +static inline void lpuart_transmit_buffer(struct lpuart_port *sport) +{ + struct circ_buf *xmit = &sport->port.state->xmit; + + while (!uart_circ_empty(xmit) && + (readb(sport->port.membase + UARTTCFIFO) < sport->txfifo_size)) { + writeb(xmit->buf[xmit->tail], sport->port.membase + UARTDR); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + sport->port.icount.tx++; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&sport->port); + + if (uart_circ_empty(xmit)) + lpuart_stop_tx(&sport->port); +} + +static inline void lpuart32_transmit_buffer(struct lpuart_port *sport) +{ + struct circ_buf *xmit = &sport->port.state->xmit; + unsigned long txcnt; + + txcnt = lpuart32_read(sport->port.membase + UARTWATER); + txcnt = txcnt >> UARTWATER_TXCNT_OFF; + txcnt &= UARTWATER_COUNT_MASK; + while (!uart_circ_empty(xmit) && (txcnt < sport->txfifo_size)) { + lpuart32_write(xmit->buf[xmit->tail], sport->port.membase + UARTDATA); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + sport->port.icount.tx++; + txcnt = lpuart32_read(sport->port.membase + UARTWATER); + txcnt = txcnt >> UARTWATER_TXCNT_OFF; + txcnt &= UARTWATER_COUNT_MASK; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&sport->port); + + if (uart_circ_empty(xmit)) + lpuart32_stop_tx(&sport->port); +} + +static void lpuart_start_tx(struct uart_port *port) +{ + struct lpuart_port *sport = container_of(port, + struct lpuart_port, port); + struct circ_buf *xmit = &sport->port.state->xmit; + unsigned char temp; + + temp = readb(port->membase + UARTCR2); + writeb(temp | UARTCR2_TIE, port->membase + UARTCR2); + + if (sport->lpuart_dma_tx_use) { + if (!uart_circ_empty(xmit) && !sport->dma_tx_in_progress) + lpuart_prepare_tx(sport); + } else { + if (readb(port->membase + UARTSR1) & UARTSR1_TDRE) + lpuart_transmit_buffer(sport); + } +} + +static void lpuart32_start_tx(struct uart_port *port) +{ + struct lpuart_port *sport = container_of(port, struct lpuart_port, port); + unsigned long temp; + + temp = lpuart32_read(port->membase + UARTCTRL); + lpuart32_write(temp | UARTCTRL_TIE, port->membase + UARTCTRL); + + if (lpuart32_read(port->membase + UARTSTAT) & UARTSTAT_TDRE) + lpuart32_transmit_buffer(sport); +} + +static irqreturn_t lpuart_txint(int irq, void *dev_id) +{ + struct lpuart_port *sport = dev_id; + struct circ_buf *xmit = &sport->port.state->xmit; + unsigned long flags; + + spin_lock_irqsave(&sport->port.lock, flags); + if (sport->port.x_char) { + if (sport->lpuart32) + lpuart32_write(sport->port.x_char, sport->port.membase + UARTDATA); + else + writeb(sport->port.x_char, sport->port.membase + UARTDR); + goto out; + } + + if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) { + if (sport->lpuart32) + lpuart32_stop_tx(&sport->port); + else + lpuart_stop_tx(&sport->port); + goto out; + } + + if (sport->lpuart32) + lpuart32_transmit_buffer(sport); + else + lpuart_transmit_buffer(sport); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&sport->port); + +out: + spin_unlock_irqrestore(&sport->port.lock, flags); + return IRQ_HANDLED; +} + +static irqreturn_t lpuart_rxint(int irq, void *dev_id) +{ + struct lpuart_port *sport = dev_id; + unsigned int flg, ignored = 0; + struct tty_port *port = &sport->port.state->port; + unsigned long flags; + unsigned char rx, sr; + + spin_lock_irqsave(&sport->port.lock, flags); + + while (!(readb(sport->port.membase + UARTSFIFO) & UARTSFIFO_RXEMPT)) { + flg = TTY_NORMAL; + sport->port.icount.rx++; + /* + * to clear the FE, OR, NF, FE, PE flags, + * read SR1 then read DR + */ + sr = readb(sport->port.membase + UARTSR1); + rx = readb(sport->port.membase + UARTDR); + + if (uart_handle_sysrq_char(&sport->port, (unsigned char)rx)) + continue; + + if (sr & (UARTSR1_PE | UARTSR1_OR | UARTSR1_FE)) { + if (sr & UARTSR1_PE) + sport->port.icount.parity++; + else if (sr & UARTSR1_FE) + sport->port.icount.frame++; + + if (sr & UARTSR1_OR) + sport->port.icount.overrun++; + + if (sr & sport->port.ignore_status_mask) { + if (++ignored > 100) + goto out; + continue; + } + + sr &= sport->port.read_status_mask; + + if (sr & UARTSR1_PE) + flg = TTY_PARITY; + else if (sr & UARTSR1_FE) + flg = TTY_FRAME; + + if (sr & UARTSR1_OR) + flg = TTY_OVERRUN; + +#ifdef SUPPORT_SYSRQ + sport->port.sysrq = 0; +#endif + } + + tty_insert_flip_char(port, rx, flg); + } + +out: + spin_unlock_irqrestore(&sport->port.lock, flags); + + tty_flip_buffer_push(port); + return IRQ_HANDLED; +} + +static irqreturn_t lpuart32_rxint(int irq, void *dev_id) +{ + struct lpuart_port *sport = dev_id; + unsigned int flg, ignored = 0; + struct tty_port *port = &sport->port.state->port; + unsigned long flags; + unsigned long rx, sr; + + spin_lock_irqsave(&sport->port.lock, flags); + + while (!(lpuart32_read(sport->port.membase + UARTFIFO) & UARTFIFO_RXEMPT)) { + flg = TTY_NORMAL; + sport->port.icount.rx++; + /* + * to clear the FE, OR, NF, FE, PE flags, + * read STAT then read DATA reg + */ + sr = lpuart32_read(sport->port.membase + UARTSTAT); + rx = lpuart32_read(sport->port.membase + UARTDATA); + rx &= 0x3ff; + + if (uart_handle_sysrq_char(&sport->port, (unsigned char)rx)) + continue; + + if (sr & (UARTSTAT_PE | UARTSTAT_OR | UARTSTAT_FE)) { + if (sr & UARTSTAT_PE) + sport->port.icount.parity++; + else if (sr & UARTSTAT_FE) + sport->port.icount.frame++; + + if (sr & UARTSTAT_OR) + sport->port.icount.overrun++; + + if (sr & sport->port.ignore_status_mask) { + if (++ignored > 100) + goto out; + continue; + } + + sr &= sport->port.read_status_mask; + + if (sr & UARTSTAT_PE) + flg = TTY_PARITY; + else if (sr & UARTSTAT_FE) + flg = TTY_FRAME; + + if (sr & UARTSTAT_OR) + flg = TTY_OVERRUN; + +#ifdef SUPPORT_SYSRQ + sport->port.sysrq = 0; +#endif + } + + tty_insert_flip_char(port, rx, flg); + } + +out: + spin_unlock_irqrestore(&sport->port.lock, flags); + + tty_flip_buffer_push(port); + return IRQ_HANDLED; +} + +static irqreturn_t lpuart_int(int irq, void *dev_id) +{ + struct lpuart_port *sport = dev_id; + unsigned char sts, crdma; + + sts = readb(sport->port.membase + UARTSR1); + crdma = readb(sport->port.membase + UARTCR5); + + if (sts & UARTSR1_RDRF && !(crdma & UARTCR5_RDMAS)) { + if (sport->lpuart_dma_rx_use) + lpuart_prepare_rx(sport); + else + lpuart_rxint(irq, dev_id); + } + if (sts & UARTSR1_TDRE && !(crdma & UARTCR5_TDMAS)) { + if (sport->lpuart_dma_tx_use) + lpuart_pio_tx(sport); + else + lpuart_txint(irq, dev_id); + } + + return IRQ_HANDLED; +} + +static irqreturn_t lpuart32_int(int irq, void *dev_id) +{ + struct lpuart_port *sport = dev_id; + unsigned long sts, rxcount; + + sts = lpuart32_read(sport->port.membase + UARTSTAT); + rxcount = lpuart32_read(sport->port.membase + UARTWATER); + rxcount = rxcount >> UARTWATER_RXCNT_OFF; + + if (sts & UARTSTAT_RDRF || rxcount > 0) + lpuart32_rxint(irq, dev_id); + + if ((sts & UARTSTAT_TDRE) && + !(lpuart32_read(sport->port.membase + UARTBAUD) & UARTBAUD_TDMAE)) + lpuart_txint(irq, dev_id); + + lpuart32_write(sts, sport->port.membase + UARTSTAT); + return IRQ_HANDLED; +} + +/* return TIOCSER_TEMT when transmitter is not busy */ +static unsigned int lpuart_tx_empty(struct uart_port *port) +{ + return (readb(port->membase + UARTSR1) & UARTSR1_TC) ? + TIOCSER_TEMT : 0; +} + +static unsigned int lpuart32_tx_empty(struct uart_port *port) +{ + return (lpuart32_read(port->membase + UARTSTAT) & UARTSTAT_TC) ? + TIOCSER_TEMT : 0; +} + +static unsigned int lpuart_get_mctrl(struct uart_port *port) +{ + unsigned int temp = 0; + unsigned char reg; + + reg = readb(port->membase + UARTMODEM); + if (reg & UARTMODEM_TXCTSE) + temp |= TIOCM_CTS; + + if (reg & UARTMODEM_RXRTSE) + temp |= TIOCM_RTS; + + return temp; +} + +static unsigned int lpuart32_get_mctrl(struct uart_port *port) +{ + unsigned int temp = 0; + unsigned long reg; + + reg = lpuart32_read(port->membase + UARTMODIR); + if (reg & UARTMODIR_TXCTSE) + temp |= TIOCM_CTS; + + if (reg & UARTMODIR_RXRTSE) + temp |= TIOCM_RTS; + + return temp; +} + +static void lpuart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + unsigned char temp; + + temp = readb(port->membase + UARTMODEM) & + ~(UARTMODEM_RXRTSE | UARTMODEM_TXCTSE); + + if (mctrl & TIOCM_RTS) + temp |= UARTMODEM_RXRTSE; + + if (mctrl & TIOCM_CTS) + temp |= UARTMODEM_TXCTSE; + + writeb(temp, port->membase + UARTMODEM); +} + +static void lpuart32_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + unsigned long temp; + + temp = lpuart32_read(port->membase + UARTMODIR) & + ~(UARTMODIR_RXRTSE | UARTMODIR_TXCTSE); + + if (mctrl & TIOCM_RTS) + temp |= UARTMODIR_RXRTSE; + + if (mctrl & TIOCM_CTS) + temp |= UARTMODIR_TXCTSE; + + lpuart32_write(temp, port->membase + UARTMODIR); +} + +static void lpuart_break_ctl(struct uart_port *port, int break_state) +{ + unsigned char temp; + + temp = readb(port->membase + UARTCR2) & ~UARTCR2_SBK; + + if (break_state != 0) + temp |= UARTCR2_SBK; + + writeb(temp, port->membase + UARTCR2); +} + +static void lpuart32_break_ctl(struct uart_port *port, int break_state) +{ + unsigned long temp; + + temp = lpuart32_read(port->membase + UARTCTRL) & ~UARTCTRL_SBK; + + if (break_state != 0) + temp |= UARTCTRL_SBK; + + lpuart32_write(temp, port->membase + UARTCTRL); +} + +static void lpuart_setup_watermark(struct lpuart_port *sport) +{ + unsigned char val, cr2; + unsigned char cr2_saved; + + cr2 = readb(sport->port.membase + UARTCR2); + cr2_saved = cr2; + cr2 &= ~(UARTCR2_TIE | UARTCR2_TCIE | UARTCR2_TE | + UARTCR2_RIE | UARTCR2_RE); + writeb(cr2, sport->port.membase + UARTCR2); + + val = readb(sport->port.membase + UARTPFIFO); + writeb(val | UARTPFIFO_TXFE | UARTPFIFO_RXFE, + sport->port.membase + UARTPFIFO); + + /* explicitly clear RDRF */ + readb(sport->port.membase + UARTSR1); + + /* flush Tx and Rx FIFO */ + writeb(UARTCFIFO_TXFLUSH | UARTCFIFO_RXFLUSH, + sport->port.membase + UARTCFIFO); + + writeb(0, sport->port.membase + UARTTWFIFO); + writeb(1, sport->port.membase + UARTRWFIFO); + + /* Restore cr2 */ + writeb(cr2_saved, sport->port.membase + UARTCR2); +} + +static void lpuart32_setup_watermark(struct lpuart_port *sport) +{ + unsigned long val, ctrl; + unsigned long ctrl_saved; + + ctrl = lpuart32_read(sport->port.membase + UARTCTRL); + ctrl_saved = ctrl; + ctrl &= ~(UARTCTRL_TIE | UARTCTRL_TCIE | UARTCTRL_TE | + UARTCTRL_RIE | UARTCTRL_RE); + lpuart32_write(ctrl, sport->port.membase + UARTCTRL); + + /* enable FIFO mode */ + val = lpuart32_read(sport->port.membase + UARTFIFO); + val |= UARTFIFO_TXFE | UARTFIFO_RXFE; + val |= UARTFIFO_TXFLUSH | UARTFIFO_RXFLUSH; + lpuart32_write(val, sport->port.membase + UARTFIFO); + + /* set the watermark */ + val = (0x1 << UARTWATER_RXWATER_OFF) | (0x0 << UARTWATER_TXWATER_OFF); + lpuart32_write(val, sport->port.membase + UARTWATER); + + /* Restore cr2 */ + lpuart32_write(ctrl_saved, sport->port.membase + UARTCTRL); +} + +static int lpuart_dma_tx_request(struct uart_port *port) +{ + struct lpuart_port *sport = container_of(port, + struct lpuart_port, port); + struct dma_slave_config dma_tx_sconfig; + dma_addr_t dma_bus; + unsigned char *dma_buf; + int ret; + + dma_bus = dma_map_single(sport->dma_tx_chan->device->dev, + sport->port.state->xmit.buf, + UART_XMIT_SIZE, DMA_TO_DEVICE); + + if (dma_mapping_error(sport->dma_tx_chan->device->dev, dma_bus)) { + dev_err(sport->port.dev, "dma_map_single tx failed\n"); + return -ENOMEM; + } + + dma_buf = sport->port.state->xmit.buf; + dma_tx_sconfig.dst_addr = sport->port.mapbase + UARTDR; + dma_tx_sconfig.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + dma_tx_sconfig.dst_maxburst = sport->txfifo_size; + dma_tx_sconfig.direction = DMA_MEM_TO_DEV; + ret = dmaengine_slave_config(sport->dma_tx_chan, &dma_tx_sconfig); + + if (ret < 0) { + dev_err(sport->port.dev, + "Dma slave config failed, err = %d\n", ret); + return ret; + } + + sport->dma_tx_buf_virt = dma_buf; + sport->dma_tx_buf_bus = dma_bus; + sport->dma_tx_in_progress = 0; + + return 0; +} + +static int lpuart_dma_rx_request(struct uart_port *port) +{ + struct lpuart_port *sport = container_of(port, + struct lpuart_port, port); + struct dma_slave_config dma_rx_sconfig; + dma_addr_t dma_bus; + unsigned char *dma_buf; + int ret; + + dma_buf = devm_kzalloc(sport->port.dev, + FSL_UART_RX_DMA_BUFFER_SIZE, GFP_KERNEL); + + if (!dma_buf) { + dev_err(sport->port.dev, "Dma rx alloc failed\n"); + return -ENOMEM; + } + + dma_bus = dma_map_single(sport->dma_rx_chan->device->dev, dma_buf, + FSL_UART_RX_DMA_BUFFER_SIZE, DMA_FROM_DEVICE); + + if (dma_mapping_error(sport->dma_rx_chan->device->dev, dma_bus)) { + dev_err(sport->port.dev, "dma_map_single rx failed\n"); + return -ENOMEM; + } + + dma_rx_sconfig.src_addr = sport->port.mapbase + UARTDR; + dma_rx_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + dma_rx_sconfig.src_maxburst = 1; + dma_rx_sconfig.direction = DMA_DEV_TO_MEM; + ret = dmaengine_slave_config(sport->dma_rx_chan, &dma_rx_sconfig); + + if (ret < 0) { + dev_err(sport->port.dev, + "Dma slave config failed, err = %d\n", ret); + return ret; + } + + sport->dma_rx_buf_virt = dma_buf; + sport->dma_rx_buf_bus = dma_bus; + sport->dma_rx_in_progress = 0; + + return 0; +} + +static void lpuart_dma_tx_free(struct uart_port *port) +{ + struct lpuart_port *sport = container_of(port, + struct lpuart_port, port); + + dma_unmap_single(sport->port.dev, sport->dma_tx_buf_bus, + UART_XMIT_SIZE, DMA_TO_DEVICE); + + sport->dma_tx_buf_bus = 0; + sport->dma_tx_buf_virt = NULL; +} + +static void lpuart_dma_rx_free(struct uart_port *port) +{ + struct lpuart_port *sport = container_of(port, + struct lpuart_port, port); + + dma_unmap_single(sport->port.dev, sport->dma_rx_buf_bus, + FSL_UART_RX_DMA_BUFFER_SIZE, DMA_FROM_DEVICE); + + sport->dma_rx_buf_bus = 0; + sport->dma_rx_buf_virt = NULL; +} + +static int lpuart_startup(struct uart_port *port) +{ + struct lpuart_port *sport = container_of(port, struct lpuart_port, port); + int ret; + unsigned long flags; + unsigned char temp; + + /* determine FIFO size and enable FIFO mode */ + temp = readb(sport->port.membase + UARTPFIFO); + + sport->txfifo_size = 0x1 << (((temp >> UARTPFIFO_TXSIZE_OFF) & + UARTPFIFO_FIFOSIZE_MASK) + 1); + + sport->port.fifosize = sport->txfifo_size; + + sport->rxfifo_size = 0x1 << (((temp >> UARTPFIFO_RXSIZE_OFF) & + UARTPFIFO_FIFOSIZE_MASK) + 1); + + if (sport->dma_rx_chan && !lpuart_dma_rx_request(port)) { + sport->lpuart_dma_rx_use = true; + setup_timer(&sport->lpuart_timer, lpuart_timer_func, + (unsigned long)sport); + } else + sport->lpuart_dma_rx_use = false; + + + if (sport->dma_tx_chan && !lpuart_dma_tx_request(port)) { + sport->lpuart_dma_tx_use = true; + temp = readb(port->membase + UARTCR5); + temp &= ~UARTCR5_RDMAS; + writeb(temp | UARTCR5_TDMAS, port->membase + UARTCR5); + } else + sport->lpuart_dma_tx_use = false; + + ret = devm_request_irq(port->dev, port->irq, lpuart_int, 0, + DRIVER_NAME, sport); + if (ret) + return ret; + + spin_lock_irqsave(&sport->port.lock, flags); + + lpuart_setup_watermark(sport); + + temp = readb(sport->port.membase + UARTCR2); + temp |= (UARTCR2_RIE | UARTCR2_TIE | UARTCR2_RE | UARTCR2_TE); + writeb(temp, sport->port.membase + UARTCR2); + + spin_unlock_irqrestore(&sport->port.lock, flags); + return 0; +} + +static int lpuart32_startup(struct uart_port *port) +{ + struct lpuart_port *sport = container_of(port, struct lpuart_port, port); + int ret; + unsigned long flags; + unsigned long temp; + + /* determine FIFO size */ + temp = lpuart32_read(sport->port.membase + UARTFIFO); + + sport->txfifo_size = 0x1 << (((temp >> UARTFIFO_TXSIZE_OFF) & + UARTFIFO_FIFOSIZE_MASK) - 1); + + sport->rxfifo_size = 0x1 << (((temp >> UARTFIFO_RXSIZE_OFF) & + UARTFIFO_FIFOSIZE_MASK) - 1); + + ret = devm_request_irq(port->dev, port->irq, lpuart32_int, 0, + DRIVER_NAME, sport); + if (ret) + return ret; + + spin_lock_irqsave(&sport->port.lock, flags); + + lpuart32_setup_watermark(sport); + + temp = lpuart32_read(sport->port.membase + UARTCTRL); + temp |= (UARTCTRL_RIE | UARTCTRL_TIE | UARTCTRL_RE | UARTCTRL_TE); + temp |= UARTCTRL_ILIE; + lpuart32_write(temp, sport->port.membase + UARTCTRL); + + spin_unlock_irqrestore(&sport->port.lock, flags); + return 0; +} + +static void lpuart_shutdown(struct uart_port *port) +{ + struct lpuart_port *sport = container_of(port, struct lpuart_port, port); + unsigned char temp; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + + /* disable Rx/Tx and interrupts */ + temp = readb(port->membase + UARTCR2); + temp &= ~(UARTCR2_TE | UARTCR2_RE | + UARTCR2_TIE | UARTCR2_TCIE | UARTCR2_RIE); + writeb(temp, port->membase + UARTCR2); + + spin_unlock_irqrestore(&port->lock, flags); + + devm_free_irq(port->dev, port->irq, sport); + + if (sport->lpuart_dma_rx_use) { + lpuart_dma_rx_free(&sport->port); + del_timer_sync(&sport->lpuart_timer); + } + + if (sport->lpuart_dma_tx_use) + lpuart_dma_tx_free(&sport->port); +} + +static void lpuart32_shutdown(struct uart_port *port) +{ + struct lpuart_port *sport = container_of(port, struct lpuart_port, port); + unsigned long temp; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + + /* disable Rx/Tx and interrupts */ + temp = lpuart32_read(port->membase + UARTCTRL); + temp &= ~(UARTCTRL_TE | UARTCTRL_RE | + UARTCTRL_TIE | UARTCTRL_TCIE | UARTCTRL_RIE); + lpuart32_write(temp, port->membase + UARTCTRL); + + spin_unlock_irqrestore(&port->lock, flags); + + devm_free_irq(port->dev, port->irq, sport); +} + +static void +lpuart_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct lpuart_port *sport = container_of(port, struct lpuart_port, port); + unsigned long flags; + unsigned char cr1, old_cr1, old_cr2, cr4, bdh, modem; + unsigned int baud; + unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8; + unsigned int sbr, brfa; + + cr1 = old_cr1 = readb(sport->port.membase + UARTCR1); + old_cr2 = readb(sport->port.membase + UARTCR2); + cr4 = readb(sport->port.membase + UARTCR4); + bdh = readb(sport->port.membase + UARTBDH); + modem = readb(sport->port.membase + UARTMODEM); + /* + * only support CS8 and CS7, and for CS7 must enable PE. + * supported mode: + * - (7,e/o,1) + * - (8,n,1) + * - (8,m/s,1) + * - (8,e/o,1) + */ + while ((termios->c_cflag & CSIZE) != CS8 && + (termios->c_cflag & CSIZE) != CS7) { + termios->c_cflag &= ~CSIZE; + termios->c_cflag |= old_csize; + old_csize = CS8; + } + + if ((termios->c_cflag & CSIZE) == CS8 || + (termios->c_cflag & CSIZE) == CS7) + cr1 = old_cr1 & ~UARTCR1_M; + + if (termios->c_cflag & CMSPAR) { + if ((termios->c_cflag & CSIZE) != CS8) { + termios->c_cflag &= ~CSIZE; + termios->c_cflag |= CS8; + } + cr1 |= UARTCR1_M; + } + + if (termios->c_cflag & CRTSCTS) { + modem |= (UARTMODEM_RXRTSE | UARTMODEM_TXCTSE); + } else { + termios->c_cflag &= ~CRTSCTS; + modem &= ~(UARTMODEM_RXRTSE | UARTMODEM_TXCTSE); + } + + if (termios->c_cflag & CSTOPB) + termios->c_cflag &= ~CSTOPB; + + /* parity must be enabled when CS7 to match 8-bits format */ + if ((termios->c_cflag & CSIZE) == CS7) + termios->c_cflag |= PARENB; + + if ((termios->c_cflag & PARENB)) { + if (termios->c_cflag & CMSPAR) { + cr1 &= ~UARTCR1_PE; + cr1 |= UARTCR1_M; + } else { + cr1 |= UARTCR1_PE; + if ((termios->c_cflag & CSIZE) == CS8) + cr1 |= UARTCR1_M; + if (termios->c_cflag & PARODD) + cr1 |= UARTCR1_PT; + else + cr1 &= ~UARTCR1_PT; + } + } + + /* ask the core to calculate the divisor */ + baud = uart_get_baud_rate(port, termios, old, 50, port->uartclk / 16); + + spin_lock_irqsave(&sport->port.lock, flags); + + sport->port.read_status_mask = 0; + if (termios->c_iflag & INPCK) + sport->port.read_status_mask |= (UARTSR1_FE | UARTSR1_PE); + if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK)) + sport->port.read_status_mask |= UARTSR1_FE; + + /* characters to ignore */ + sport->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + sport->port.ignore_status_mask |= UARTSR1_PE; + if (termios->c_iflag & IGNBRK) { + sport->port.ignore_status_mask |= UARTSR1_FE; + /* + * if we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + sport->port.ignore_status_mask |= UARTSR1_OR; + } + + /* update the per-port timeout */ + uart_update_timeout(port, termios->c_cflag, baud); + + if (sport->lpuart_dma_rx_use) { + /* Calculate delay for 1.5 DMA buffers */ + sport->dma_rx_timeout = (sport->port.timeout - HZ / 50) * + FSL_UART_RX_DMA_BUFFER_SIZE * 3 / + sport->rxfifo_size / 2; + dev_dbg(port->dev, "DMA Rx t-out %ums, tty t-out %u jiffies\n", + sport->dma_rx_timeout * 1000 / HZ, sport->port.timeout); + if (sport->dma_rx_timeout < msecs_to_jiffies(20)) + sport->dma_rx_timeout = msecs_to_jiffies(20); + } + + /* wait transmit engin complete */ + while (!(readb(sport->port.membase + UARTSR1) & UARTSR1_TC)) + barrier(); + + /* disable transmit and receive */ + writeb(old_cr2 & ~(UARTCR2_TE | UARTCR2_RE), + sport->port.membase + UARTCR2); + + sbr = sport->port.uartclk / (16 * baud); + brfa = ((sport->port.uartclk - (16 * sbr * baud)) * 2) / baud; + bdh &= ~UARTBDH_SBR_MASK; + bdh |= (sbr >> 8) & 0x1F; + cr4 &= ~UARTCR4_BRFA_MASK; + brfa &= UARTCR4_BRFA_MASK; + writeb(cr4 | brfa, sport->port.membase + UARTCR4); + writeb(bdh, sport->port.membase + UARTBDH); + writeb(sbr & 0xFF, sport->port.membase + UARTBDL); + writeb(cr1, sport->port.membase + UARTCR1); + writeb(modem, sport->port.membase + UARTMODEM); + + /* restore control register */ + writeb(old_cr2, sport->port.membase + UARTCR2); + + spin_unlock_irqrestore(&sport->port.lock, flags); +} + +static void +lpuart32_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct lpuart_port *sport = container_of(port, struct lpuart_port, port); + unsigned long flags; + unsigned long ctrl, old_ctrl, bd, modem; + unsigned int baud; + unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8; + unsigned int sbr; + + ctrl = old_ctrl = lpuart32_read(sport->port.membase + UARTCTRL); + bd = lpuart32_read(sport->port.membase + UARTBAUD); + modem = lpuart32_read(sport->port.membase + UARTMODIR); + /* + * only support CS8 and CS7, and for CS7 must enable PE. + * supported mode: + * - (7,e/o,1) + * - (8,n,1) + * - (8,m/s,1) + * - (8,e/o,1) + */ + while ((termios->c_cflag & CSIZE) != CS8 && + (termios->c_cflag & CSIZE) != CS7) { + termios->c_cflag &= ~CSIZE; + termios->c_cflag |= old_csize; + old_csize = CS8; + } + + if ((termios->c_cflag & CSIZE) == CS8 || + (termios->c_cflag & CSIZE) == CS7) + ctrl = old_ctrl & ~UARTCTRL_M; + + if (termios->c_cflag & CMSPAR) { + if ((termios->c_cflag & CSIZE) != CS8) { + termios->c_cflag &= ~CSIZE; + termios->c_cflag |= CS8; + } + ctrl |= UARTCTRL_M; + } + + if (termios->c_cflag & CRTSCTS) { + modem |= (UARTMODEM_RXRTSE | UARTMODEM_TXCTSE); + } else { + termios->c_cflag &= ~CRTSCTS; + modem &= ~(UARTMODEM_RXRTSE | UARTMODEM_TXCTSE); + } + + if (termios->c_cflag & CSTOPB) + termios->c_cflag &= ~CSTOPB; + + /* parity must be enabled when CS7 to match 8-bits format */ + if ((termios->c_cflag & CSIZE) == CS7) + termios->c_cflag |= PARENB; + + if ((termios->c_cflag & PARENB)) { + if (termios->c_cflag & CMSPAR) { + ctrl &= ~UARTCTRL_PE; + ctrl |= UARTCTRL_M; + } else { + ctrl |= UARTCR1_PE; + if ((termios->c_cflag & CSIZE) == CS8) + ctrl |= UARTCTRL_M; + if (termios->c_cflag & PARODD) + ctrl |= UARTCTRL_PT; + else + ctrl &= ~UARTCTRL_PT; + } + } + + /* ask the core to calculate the divisor */ + baud = uart_get_baud_rate(port, termios, old, 50, port->uartclk / 16); + + spin_lock_irqsave(&sport->port.lock, flags); + + sport->port.read_status_mask = 0; + if (termios->c_iflag & INPCK) + sport->port.read_status_mask |= (UARTSTAT_FE | UARTSTAT_PE); + if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK)) + sport->port.read_status_mask |= UARTSTAT_FE; + + /* characters to ignore */ + sport->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + sport->port.ignore_status_mask |= UARTSTAT_PE; + if (termios->c_iflag & IGNBRK) { + sport->port.ignore_status_mask |= UARTSTAT_FE; + /* + * if we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + sport->port.ignore_status_mask |= UARTSTAT_OR; + } + + /* update the per-port timeout */ + uart_update_timeout(port, termios->c_cflag, baud); + + /* wait transmit engin complete */ + while (!(lpuart32_read(sport->port.membase + UARTSTAT) & UARTSTAT_TC)) + barrier(); + + /* disable transmit and receive */ + lpuart32_write(old_ctrl & ~(UARTCTRL_TE | UARTCTRL_RE), + sport->port.membase + UARTCTRL); + + sbr = sport->port.uartclk / (16 * baud); + bd &= ~UARTBAUD_SBR_MASK; + bd |= sbr & UARTBAUD_SBR_MASK; + bd |= UARTBAUD_BOTHEDGE; + bd &= ~(UARTBAUD_TDMAE | UARTBAUD_RDMAE); + lpuart32_write(bd, sport->port.membase + UARTBAUD); + lpuart32_write(modem, sport->port.membase + UARTMODIR); + lpuart32_write(ctrl, sport->port.membase + UARTCTRL); + /* restore control register */ + + spin_unlock_irqrestore(&sport->port.lock, flags); +} + +static const char *lpuart_type(struct uart_port *port) +{ + return "FSL_LPUART"; +} + +static void lpuart_release_port(struct uart_port *port) +{ + /* nothing to do */ +} + +static int lpuart_request_port(struct uart_port *port) +{ + return 0; +} + +/* configure/autoconfigure the port */ +static void lpuart_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) + port->type = PORT_LPUART; +} + +static int lpuart_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + int ret = 0; + + if (ser->type != PORT_UNKNOWN && ser->type != PORT_LPUART) + ret = -EINVAL; + if (port->irq != ser->irq) + ret = -EINVAL; + if (ser->io_type != UPIO_MEM) + ret = -EINVAL; + if (port->uartclk / 16 != ser->baud_base) + ret = -EINVAL; + if (port->iobase != ser->port) + ret = -EINVAL; + if (ser->hub6 != 0) + ret = -EINVAL; + return ret; +} + +static struct uart_ops lpuart_pops = { + .tx_empty = lpuart_tx_empty, + .set_mctrl = lpuart_set_mctrl, + .get_mctrl = lpuart_get_mctrl, + .stop_tx = lpuart_stop_tx, + .start_tx = lpuart_start_tx, + .stop_rx = lpuart_stop_rx, + .break_ctl = lpuart_break_ctl, + .startup = lpuart_startup, + .shutdown = lpuart_shutdown, + .set_termios = lpuart_set_termios, + .type = lpuart_type, + .request_port = lpuart_request_port, + .release_port = lpuart_release_port, + .config_port = lpuart_config_port, + .verify_port = lpuart_verify_port, + .flush_buffer = lpuart_flush_buffer, +}; + +static struct uart_ops lpuart32_pops = { + .tx_empty = lpuart32_tx_empty, + .set_mctrl = lpuart32_set_mctrl, + .get_mctrl = lpuart32_get_mctrl, + .stop_tx = lpuart32_stop_tx, + .start_tx = lpuart32_start_tx, + .stop_rx = lpuart32_stop_rx, + .break_ctl = lpuart32_break_ctl, + .startup = lpuart32_startup, + .shutdown = lpuart32_shutdown, + .set_termios = lpuart32_set_termios, + .type = lpuart_type, + .request_port = lpuart_request_port, + .release_port = lpuart_release_port, + .config_port = lpuart_config_port, + .verify_port = lpuart_verify_port, + .flush_buffer = lpuart_flush_buffer, +}; + +static struct lpuart_port *lpuart_ports[UART_NR]; + +#ifdef CONFIG_SERIAL_FSL_LPUART_CONSOLE +static void lpuart_console_putchar(struct uart_port *port, int ch) +{ + while (!(readb(port->membase + UARTSR1) & UARTSR1_TDRE)) + barrier(); + + writeb(ch, port->membase + UARTDR); +} + +static void lpuart32_console_putchar(struct uart_port *port, int ch) +{ + while (!(lpuart32_read(port->membase + UARTSTAT) & UARTSTAT_TDRE)) + barrier(); + + lpuart32_write(ch, port->membase + UARTDATA); +} + +static void +lpuart_console_write(struct console *co, const char *s, unsigned int count) +{ + struct lpuart_port *sport = lpuart_ports[co->index]; + unsigned char old_cr2, cr2; + + /* first save CR2 and then disable interrupts */ + cr2 = old_cr2 = readb(sport->port.membase + UARTCR2); + cr2 |= (UARTCR2_TE | UARTCR2_RE); + cr2 &= ~(UARTCR2_TIE | UARTCR2_TCIE | UARTCR2_RIE); + writeb(cr2, sport->port.membase + UARTCR2); + + uart_console_write(&sport->port, s, count, lpuart_console_putchar); + + /* wait for transmitter finish complete and restore CR2 */ + while (!(readb(sport->port.membase + UARTSR1) & UARTSR1_TC)) + barrier(); + + writeb(old_cr2, sport->port.membase + UARTCR2); +} + +static void +lpuart32_console_write(struct console *co, const char *s, unsigned int count) +{ + struct lpuart_port *sport = lpuart_ports[co->index]; + unsigned long old_cr, cr; + + /* first save CR2 and then disable interrupts */ + cr = old_cr = lpuart32_read(sport->port.membase + UARTCTRL); + cr |= (UARTCTRL_TE | UARTCTRL_RE); + cr &= ~(UARTCTRL_TIE | UARTCTRL_TCIE | UARTCTRL_RIE); + lpuart32_write(cr, sport->port.membase + UARTCTRL); + + uart_console_write(&sport->port, s, count, lpuart32_console_putchar); + + /* wait for transmitter finish complete and restore CR2 */ + while (!(lpuart32_read(sport->port.membase + UARTSTAT) & UARTSTAT_TC)) + barrier(); + + lpuart32_write(old_cr, sport->port.membase + UARTCTRL); +} + +/* + * if the port was already initialised (eg, by a boot loader), + * try to determine the current setup. + */ +static void __init +lpuart_console_get_options(struct lpuart_port *sport, int *baud, + int *parity, int *bits) +{ + unsigned char cr, bdh, bdl, brfa; + unsigned int sbr, uartclk, baud_raw; + + cr = readb(sport->port.membase + UARTCR2); + cr &= UARTCR2_TE | UARTCR2_RE; + if (!cr) + return; + + /* ok, the port was enabled */ + + cr = readb(sport->port.membase + UARTCR1); + + *parity = 'n'; + if (cr & UARTCR1_PE) { + if (cr & UARTCR1_PT) + *parity = 'o'; + else + *parity = 'e'; + } + + if (cr & UARTCR1_M) + *bits = 9; + else + *bits = 8; + + bdh = readb(sport->port.membase + UARTBDH); + bdh &= UARTBDH_SBR_MASK; + bdl = readb(sport->port.membase + UARTBDL); + sbr = bdh; + sbr <<= 8; + sbr |= bdl; + brfa = readb(sport->port.membase + UARTCR4); + brfa &= UARTCR4_BRFA_MASK; + + uartclk = clk_get_rate(sport->clk); + /* + * baud = mod_clk/(16*(sbr[13]+(brfa)/32) + */ + baud_raw = uartclk / (16 * (sbr + brfa / 32)); + + if (*baud != baud_raw) + printk(KERN_INFO "Serial: Console lpuart rounded baud rate" + "from %d to %d\n", baud_raw, *baud); +} + +static void __init +lpuart32_console_get_options(struct lpuart_port *sport, int *baud, + int *parity, int *bits) +{ + unsigned long cr, bd; + unsigned int sbr, uartclk, baud_raw; + + cr = lpuart32_read(sport->port.membase + UARTCTRL); + cr &= UARTCTRL_TE | UARTCTRL_RE; + if (!cr) + return; + + /* ok, the port was enabled */ + + cr = lpuart32_read(sport->port.membase + UARTCTRL); + + *parity = 'n'; + if (cr & UARTCTRL_PE) { + if (cr & UARTCTRL_PT) + *parity = 'o'; + else + *parity = 'e'; + } + + if (cr & UARTCTRL_M) + *bits = 9; + else + *bits = 8; + + bd = lpuart32_read(sport->port.membase + UARTBAUD); + bd &= UARTBAUD_SBR_MASK; + sbr = bd; + uartclk = clk_get_rate(sport->clk); + /* + * baud = mod_clk/(16*(sbr[13]+(brfa)/32) + */ + baud_raw = uartclk / (16 * sbr); + + if (*baud != baud_raw) + printk(KERN_INFO "Serial: Console lpuart rounded baud rate" + "from %d to %d\n", baud_raw, *baud); +} + +static int __init lpuart_console_setup(struct console *co, char *options) +{ + struct lpuart_port *sport; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + /* + * check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index == -1 || co->index >= ARRAY_SIZE(lpuart_ports)) + co->index = 0; + + sport = lpuart_ports[co->index]; + if (sport == NULL) + return -ENODEV; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + else + if (sport->lpuart32) + lpuart32_console_get_options(sport, &baud, &parity, &bits); + else + lpuart_console_get_options(sport, &baud, &parity, &bits); + + if (sport->lpuart32) + lpuart32_setup_watermark(sport); + else + lpuart_setup_watermark(sport); + + return uart_set_options(&sport->port, co, baud, parity, bits, flow); +} + +static struct uart_driver lpuart_reg; +static struct console lpuart_console = { + .name = DEV_NAME, + .write = lpuart_console_write, + .device = uart_console_device, + .setup = lpuart_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &lpuart_reg, +}; + +static struct console lpuart32_console = { + .name = DEV_NAME, + .write = lpuart32_console_write, + .device = uart_console_device, + .setup = lpuart_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &lpuart_reg, +}; + +#define LPUART_CONSOLE (&lpuart_console) +#define LPUART32_CONSOLE (&lpuart32_console) +#else +#define LPUART_CONSOLE NULL +#define LPUART32_CONSOLE NULL +#endif + +static struct uart_driver lpuart_reg = { + .owner = THIS_MODULE, + .driver_name = DRIVER_NAME, + .dev_name = DEV_NAME, + .nr = ARRAY_SIZE(lpuart_ports), + .cons = LPUART_CONSOLE, +}; + +static int lpuart_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct lpuart_port *sport; + struct resource *res; + int ret; + + sport = devm_kzalloc(&pdev->dev, sizeof(*sport), GFP_KERNEL); + if (!sport) + return -ENOMEM; + + pdev->dev.coherent_dma_mask = 0; + + ret = of_alias_get_id(np, "serial"); + if (ret < 0) { + dev_err(&pdev->dev, "failed to get alias id, errno %d\n", ret); + return ret; + } + sport->port.line = ret; + sport->lpuart32 = of_device_is_compatible(np, "fsl,ls1021a-lpuart"); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + sport->port.membase = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(sport->port.membase)) + return PTR_ERR(sport->port.membase); + + sport->port.mapbase = res->start; + sport->port.dev = &pdev->dev; + sport->port.type = PORT_LPUART; + sport->port.iotype = UPIO_MEM; + sport->port.irq = platform_get_irq(pdev, 0); + if (sport->lpuart32) + sport->port.ops = &lpuart32_pops; + else + sport->port.ops = &lpuart_pops; + sport->port.flags = UPF_BOOT_AUTOCONF; + + sport->clk = devm_clk_get(&pdev->dev, "ipg"); + if (IS_ERR(sport->clk)) { + ret = PTR_ERR(sport->clk); + dev_err(&pdev->dev, "failed to get uart clk: %d\n", ret); + return ret; + } + + ret = clk_prepare_enable(sport->clk); + if (ret) { + dev_err(&pdev->dev, "failed to enable uart clk: %d\n", ret); + return ret; + } + + sport->port.uartclk = clk_get_rate(sport->clk); + + lpuart_ports[sport->port.line] = sport; + + platform_set_drvdata(pdev, &sport->port); + + if (sport->lpuart32) + lpuart_reg.cons = LPUART32_CONSOLE; + else + lpuart_reg.cons = LPUART_CONSOLE; + + ret = uart_add_one_port(&lpuart_reg, &sport->port); + if (ret) { + clk_disable_unprepare(sport->clk); + return ret; + } + + sport->dma_tx_chan = dma_request_slave_channel(sport->port.dev, "tx"); + if (!sport->dma_tx_chan) + dev_info(sport->port.dev, "DMA tx channel request failed, " + "operating without tx DMA\n"); + + sport->dma_rx_chan = dma_request_slave_channel(sport->port.dev, "rx"); + if (!sport->dma_rx_chan) + dev_info(sport->port.dev, "DMA rx channel request failed, " + "operating without rx DMA\n"); + + return 0; +} + +static int lpuart_remove(struct platform_device *pdev) +{ + struct lpuart_port *sport = platform_get_drvdata(pdev); + + uart_remove_one_port(&lpuart_reg, &sport->port); + + clk_disable_unprepare(sport->clk); + + if (sport->dma_tx_chan) + dma_release_channel(sport->dma_tx_chan); + + if (sport->dma_rx_chan) + dma_release_channel(sport->dma_rx_chan); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int lpuart_suspend(struct device *dev) +{ + struct lpuart_port *sport = dev_get_drvdata(dev); + unsigned long temp; + + if (sport->lpuart32) { + /* disable Rx/Tx and interrupts */ + temp = lpuart32_read(sport->port.membase + UARTCTRL); + temp &= ~(UARTCTRL_TE | UARTCTRL_TIE | UARTCTRL_TCIE); + lpuart32_write(temp, sport->port.membase + UARTCTRL); + } else { + /* disable Rx/Tx and interrupts */ + temp = readb(sport->port.membase + UARTCR2); + temp &= ~(UARTCR2_TE | UARTCR2_TIE | UARTCR2_TCIE); + writeb(temp, sport->port.membase + UARTCR2); + } + + uart_suspend_port(&lpuart_reg, &sport->port); + + return 0; +} + +static int lpuart_resume(struct device *dev) +{ + struct lpuart_port *sport = dev_get_drvdata(dev); + unsigned long temp; + + if (sport->lpuart32) { + lpuart32_setup_watermark(sport); + temp = lpuart32_read(sport->port.membase + UARTCTRL); + temp |= (UARTCTRL_RIE | UARTCTRL_TIE | UARTCTRL_RE | + UARTCTRL_TE | UARTCTRL_ILIE); + lpuart32_write(temp, sport->port.membase + UARTCTRL); + } else { + lpuart_setup_watermark(sport); + temp = readb(sport->port.membase + UARTCR2); + temp |= (UARTCR2_RIE | UARTCR2_TIE | UARTCR2_RE | UARTCR2_TE); + writeb(temp, sport->port.membase + UARTCR2); + } + + uart_resume_port(&lpuart_reg, &sport->port); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(lpuart_pm_ops, lpuart_suspend, lpuart_resume); + +static struct platform_driver lpuart_driver = { + .probe = lpuart_probe, + .remove = lpuart_remove, + .driver = { + .name = "fsl-lpuart", + .of_match_table = lpuart_dt_ids, + .pm = &lpuart_pm_ops, + }, +}; + +static int __init lpuart_serial_init(void) +{ + int ret = uart_register_driver(&lpuart_reg); + + if (ret) + return ret; + + ret = platform_driver_register(&lpuart_driver); + if (ret) + uart_unregister_driver(&lpuart_reg); + + return ret; +} + +static void __exit lpuart_serial_exit(void) +{ + platform_driver_unregister(&lpuart_driver); + uart_unregister_driver(&lpuart_reg); +} + +module_init(lpuart_serial_init); +module_exit(lpuart_serial_exit); + +MODULE_DESCRIPTION("Freescale lpuart serial port driver"); +MODULE_LICENSE("GPL v2"); |