Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

1 files changed, 657 insertions, 0 deletions

diff --git a/kernel/drivers/tty/serial/altera_uart.c b/kernel/drivers/tty/serial/altera_uart.c
new file mode 100644
index 000000000..b2859fe07
--- /dev/null
+++ b/kernel/drivers/tty/serial/altera_uart.c
@@ -0,0 +1,657 @@
+/*
+ * altera_uart.c -- Altera UART driver
+ *
+ * Based on mcf.c -- Freescale ColdFire UART driver
+ *
+ * (C) Copyright 2003-2007, Greg Ungerer <gerg@snapgear.com>
+ * (C) Copyright 2008, Thomas Chou <thomas@wytron.com.tw>
+ * (C) Copyright 2010, Tobias Klauser <tklauser@distanz.ch>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/console.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/io.h>
+#include <linux/altera_uart.h>
+
+#define DRV_NAME "altera_uart"
+#define SERIAL_ALTERA_MAJOR 204
+#define SERIAL_ALTERA_MINOR 213
+
+/*
+ * Altera UART register definitions according to the Nios UART datasheet:
+ * http://www.altera.com/literature/ds/ds_nios_uart.pdf
+ */
+
+#define ALTERA_UART_SIZE		32
+
+#define ALTERA_UART_RXDATA_REG		0
+#define ALTERA_UART_TXDATA_REG		4
+#define ALTERA_UART_STATUS_REG		8
+#define ALTERA_UART_CONTROL_REG		12
+#define ALTERA_UART_DIVISOR_REG		16
+#define ALTERA_UART_EOP_REG		20
+
+#define ALTERA_UART_STATUS_PE_MSK	0x0001	/* parity error */
+#define ALTERA_UART_STATUS_FE_MSK	0x0002	/* framing error */
+#define ALTERA_UART_STATUS_BRK_MSK	0x0004	/* break */
+#define ALTERA_UART_STATUS_ROE_MSK	0x0008	/* RX overrun error */
+#define ALTERA_UART_STATUS_TOE_MSK	0x0010	/* TX overrun error */
+#define ALTERA_UART_STATUS_TMT_MSK	0x0020	/* TX shift register state */
+#define ALTERA_UART_STATUS_TRDY_MSK	0x0040	/* TX ready */
+#define ALTERA_UART_STATUS_RRDY_MSK	0x0080	/* RX ready */
+#define ALTERA_UART_STATUS_E_MSK	0x0100	/* exception condition */
+#define ALTERA_UART_STATUS_DCTS_MSK	0x0400	/* CTS logic-level change */
+#define ALTERA_UART_STATUS_CTS_MSK	0x0800	/* CTS logic state */
+#define ALTERA_UART_STATUS_EOP_MSK	0x1000	/* EOP written/read */
+
+						/* Enable interrupt on... */
+#define ALTERA_UART_CONTROL_PE_MSK	0x0001	/* ...parity error */
+#define ALTERA_UART_CONTROL_FE_MSK	0x0002	/* ...framing error */
+#define ALTERA_UART_CONTROL_BRK_MSK	0x0004	/* ...break */
+#define ALTERA_UART_CONTROL_ROE_MSK	0x0008	/* ...RX overrun */
+#define ALTERA_UART_CONTROL_TOE_MSK	0x0010	/* ...TX overrun */
+#define ALTERA_UART_CONTROL_TMT_MSK	0x0020	/* ...TX shift register empty */
+#define ALTERA_UART_CONTROL_TRDY_MSK	0x0040	/* ...TX ready */
+#define ALTERA_UART_CONTROL_RRDY_MSK	0x0080	/* ...RX ready */
+#define ALTERA_UART_CONTROL_E_MSK	0x0100	/* ...exception*/
+
+#define ALTERA_UART_CONTROL_TRBK_MSK	0x0200	/* TX break */
+#define ALTERA_UART_CONTROL_DCTS_MSK	0x0400	/* Interrupt on CTS change */
+#define ALTERA_UART_CONTROL_RTS_MSK	0x0800	/* RTS signal */
+#define ALTERA_UART_CONTROL_EOP_MSK	0x1000	/* Interrupt on EOP */
+
+/*
+ * Local per-uart structure.
+ */
+struct altera_uart {
+	struct uart_port port;
+	struct timer_list tmr;
+	unsigned int sigs;	/* Local copy of line sigs */
+	unsigned short imr;	/* Local IMR mirror */
+};
+
+static u32 altera_uart_readl(struct uart_port *port, int reg)
+{
+	return readl(port->membase + (reg << port->regshift));
+}
+
+static void altera_uart_writel(struct uart_port *port, u32 dat, int reg)
+{
+	writel(dat, port->membase + (reg << port->regshift));
+}
+
+static unsigned int altera_uart_tx_empty(struct uart_port *port)
+{
+	return (altera_uart_readl(port, ALTERA_UART_STATUS_REG) &
+		ALTERA_UART_STATUS_TMT_MSK) ? TIOCSER_TEMT : 0;
+}
+
+static unsigned int altera_uart_get_mctrl(struct uart_port *port)
+{
+	struct altera_uart *pp = container_of(port, struct altera_uart, port);
+	unsigned int sigs;
+
+	sigs = (altera_uart_readl(port, ALTERA_UART_STATUS_REG) &
+	     ALTERA_UART_STATUS_CTS_MSK) ? TIOCM_CTS : 0;
+	sigs |= (pp->sigs & TIOCM_RTS);
+
+	return sigs;
+}
+
+static void altera_uart_set_mctrl(struct uart_port *port, unsigned int sigs)
+{
+	struct altera_uart *pp = container_of(port, struct altera_uart, port);
+
+	pp->sigs = sigs;
+	if (sigs & TIOCM_RTS)
+		pp->imr |= ALTERA_UART_CONTROL_RTS_MSK;
+	else
+		pp->imr &= ~ALTERA_UART_CONTROL_RTS_MSK;
+	altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
+}
+
+static void altera_uart_start_tx(struct uart_port *port)
+{
+	struct altera_uart *pp = container_of(port, struct altera_uart, port);
+
+	pp->imr |= ALTERA_UART_CONTROL_TRDY_MSK;
+	altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
+}
+
+static void altera_uart_stop_tx(struct uart_port *port)
+{
+	struct altera_uart *pp = container_of(port, struct altera_uart, port);
+
+	pp->imr &= ~ALTERA_UART_CONTROL_TRDY_MSK;
+	altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
+}
+
+static void altera_uart_stop_rx(struct uart_port *port)
+{
+	struct altera_uart *pp = container_of(port, struct altera_uart, port);
+
+	pp->imr &= ~ALTERA_UART_CONTROL_RRDY_MSK;
+	altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
+}
+
+static void altera_uart_break_ctl(struct uart_port *port, int break_state)
+{
+	struct altera_uart *pp = container_of(port, struct altera_uart, port);
+	unsigned long flags;
+
+	spin_lock_irqsave(&port->lock, flags);
+	if (break_state == -1)
+		pp->imr |= ALTERA_UART_CONTROL_TRBK_MSK;
+	else
+		pp->imr &= ~ALTERA_UART_CONTROL_TRBK_MSK;
+	altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void altera_uart_set_termios(struct uart_port *port,
+				    struct ktermios *termios,
+				    struct ktermios *old)
+{
+	unsigned long flags;
+	unsigned int baud, baudclk;
+
+	baud = uart_get_baud_rate(port, termios, old, 0, 4000000);
+	baudclk = port->uartclk / baud;
+
+	if (old)
+		tty_termios_copy_hw(termios, old);
+	tty_termios_encode_baud_rate(termios, baud, baud);
+
+	spin_lock_irqsave(&port->lock, flags);
+	uart_update_timeout(port, termios->c_cflag, baud);
+	altera_uart_writel(port, baudclk, ALTERA_UART_DIVISOR_REG);
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	/*
+	 * FIXME: port->read_status_mask and port->ignore_status_mask
+	 * need to be initialized based on termios settings for
+	 * INPCK, IGNBRK, IGNPAR, PARMRK, BRKINT
+	 */
+}
+
+static void altera_uart_rx_chars(struct altera_uart *pp)
+{
+	struct uart_port *port = &pp->port;
+	unsigned char ch, flag;
+	unsigned short status;
+
+	while ((status = altera_uart_readl(port, ALTERA_UART_STATUS_REG)) &
+	       ALTERA_UART_STATUS_RRDY_MSK) {
+		ch = altera_uart_readl(port, ALTERA_UART_RXDATA_REG);
+		flag = TTY_NORMAL;
+		port->icount.rx++;
+
+		if (status & ALTERA_UART_STATUS_E_MSK) {
+			altera_uart_writel(port, status,
+					   ALTERA_UART_STATUS_REG);
+
+			if (status & ALTERA_UART_STATUS_BRK_MSK) {
+				port->icount.brk++;
+				if (uart_handle_break(port))
+					continue;
+			} else if (status & ALTERA_UART_STATUS_PE_MSK) {
+				port->icount.parity++;
+			} else if (status & ALTERA_UART_STATUS_ROE_MSK) {
+				port->icount.overrun++;
+			} else if (status & ALTERA_UART_STATUS_FE_MSK) {
+				port->icount.frame++;
+			}
+
+			status &= port->read_status_mask;
+
+			if (status & ALTERA_UART_STATUS_BRK_MSK)
+				flag = TTY_BREAK;
+			else if (status & ALTERA_UART_STATUS_PE_MSK)
+				flag = TTY_PARITY;
+			else if (status & ALTERA_UART_STATUS_FE_MSK)
+				flag = TTY_FRAME;
+		}
+
+		if (uart_handle_sysrq_char(port, ch))
+			continue;
+		uart_insert_char(port, status, ALTERA_UART_STATUS_ROE_MSK, ch,
+				 flag);
+	}
+
+	spin_unlock(&port->lock);
+	tty_flip_buffer_push(&port->state->port);
+	spin_lock(&port->lock);
+}
+
+static void altera_uart_tx_chars(struct altera_uart *pp)
+{
+	struct uart_port *port = &pp->port;
+	struct circ_buf *xmit = &port->state->xmit;
+
+	if (port->x_char) {
+		/* Send special char - probably flow control */
+		altera_uart_writel(port, port->x_char, ALTERA_UART_TXDATA_REG);
+		port->x_char = 0;
+		port->icount.tx++;
+		return;
+	}
+
+	while (altera_uart_readl(port, ALTERA_UART_STATUS_REG) &
+	       ALTERA_UART_STATUS_TRDY_MSK) {
+		if (xmit->head == xmit->tail)
+			break;
+		altera_uart_writel(port, xmit->buf[xmit->tail],
+		       ALTERA_UART_TXDATA_REG);
+		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+		port->icount.tx++;
+	}
+
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(port);
+
+	if (xmit->head == xmit->tail) {
+		pp->imr &= ~ALTERA_UART_CONTROL_TRDY_MSK;
+		altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
+	}
+}
+
+static irqreturn_t altera_uart_interrupt(int irq, void *data)
+{
+	struct uart_port *port = data;
+	struct altera_uart *pp = container_of(port, struct altera_uart, port);
+	unsigned int isr;
+
+	isr = altera_uart_readl(port, ALTERA_UART_STATUS_REG) & pp->imr;
+
+	spin_lock(&port->lock);
+	if (isr & ALTERA_UART_STATUS_RRDY_MSK)
+		altera_uart_rx_chars(pp);
+	if (isr & ALTERA_UART_STATUS_TRDY_MSK)
+		altera_uart_tx_chars(pp);
+	spin_unlock(&port->lock);
+
+	return IRQ_RETVAL(isr);
+}
+
+static void altera_uart_timer(unsigned long data)
+{
+	struct uart_port *port = (void *)data;
+	struct altera_uart *pp = container_of(port, struct altera_uart, port);
+
+	altera_uart_interrupt(0, port);
+	mod_timer(&pp->tmr, jiffies + uart_poll_timeout(port));
+}
+
+static void altera_uart_config_port(struct uart_port *port, int flags)
+{
+	port->type = PORT_ALTERA_UART;
+
+	/* Clear mask, so no surprise interrupts. */
+	altera_uart_writel(port, 0, ALTERA_UART_CONTROL_REG);
+	/* Clear status register */
+	altera_uart_writel(port, 0, ALTERA_UART_STATUS_REG);
+}
+
+static int altera_uart_startup(struct uart_port *port)
+{
+	struct altera_uart *pp = container_of(port, struct altera_uart, port);
+	unsigned long flags;
+	int ret;
+
+	if (!port->irq) {
+		setup_timer(&pp->tmr, altera_uart_timer, (unsigned long)port);
+		mod_timer(&pp->tmr, jiffies + uart_poll_timeout(port));
+		return 0;
+	}
+
+	ret = request_irq(port->irq, altera_uart_interrupt, 0,
+			DRV_NAME, port);
+	if (ret) {
+		pr_err(DRV_NAME ": unable to attach Altera UART %d "
+		       "interrupt vector=%d\n", port->line, port->irq);
+		return ret;
+	}
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	/* Enable RX interrupts now */
+	pp->imr = ALTERA_UART_CONTROL_RRDY_MSK;
+	writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
+
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	return 0;
+}
+
+static void altera_uart_shutdown(struct uart_port *port)
+{
+	struct altera_uart *pp = container_of(port, struct altera_uart, port);
+	unsigned long flags;
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	/* Disable all interrupts now */
+	pp->imr = 0;
+	writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
+
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	if (port->irq)
+		free_irq(port->irq, port);
+	else
+		del_timer_sync(&pp->tmr);
+}
+
+static const char *altera_uart_type(struct uart_port *port)
+{
+	return (port->type == PORT_ALTERA_UART) ? "Altera UART" : NULL;
+}
+
+static int altera_uart_request_port(struct uart_port *port)
+{
+	/* UARTs always present */
+	return 0;
+}
+
+static void altera_uart_release_port(struct uart_port *port)
+{
+	/* Nothing to release... */
+}
+
+static int altera_uart_verify_port(struct uart_port *port,
+				   struct serial_struct *ser)
+{
+	if ((ser->type != PORT_UNKNOWN) && (ser->type != PORT_ALTERA_UART))
+		return -EINVAL;
+	return 0;
+}
+
+#ifdef CONFIG_CONSOLE_POLL
+static int altera_uart_poll_get_char(struct uart_port *port)
+{
+	while (!(altera_uart_readl(port, ALTERA_UART_STATUS_REG) &
+		 ALTERA_UART_STATUS_RRDY_MSK))
+		cpu_relax();
+
+	return altera_uart_readl(port, ALTERA_UART_RXDATA_REG);
+}
+
+static void altera_uart_poll_put_char(struct uart_port *port, unsigned char c)
+{
+	while (!(altera_uart_readl(port, ALTERA_UART_STATUS_REG) &
+		 ALTERA_UART_STATUS_TRDY_MSK))
+		cpu_relax();
+
+	altera_uart_writel(port, c, ALTERA_UART_TXDATA_REG);
+}
+#endif
+
+/*
+ *	Define the basic serial functions we support.
+ */
+static struct uart_ops altera_uart_ops = {
+	.tx_empty	= altera_uart_tx_empty,
+	.get_mctrl	= altera_uart_get_mctrl,
+	.set_mctrl	= altera_uart_set_mctrl,
+	.start_tx	= altera_uart_start_tx,
+	.stop_tx	= altera_uart_stop_tx,
+	.stop_rx	= altera_uart_stop_rx,
+	.break_ctl	= altera_uart_break_ctl,
+	.startup	= altera_uart_startup,
+	.shutdown	= altera_uart_shutdown,
+	.set_termios	= altera_uart_set_termios,
+	.type		= altera_uart_type,
+	.request_port	= altera_uart_request_port,
+	.release_port	= altera_uart_release_port,
+	.config_port	= altera_uart_config_port,
+	.verify_port	= altera_uart_verify_port,
+#ifdef CONFIG_CONSOLE_POLL
+	.poll_get_char	= altera_uart_poll_get_char,
+	.poll_put_char	= altera_uart_poll_put_char,
+#endif
+};
+
+static struct altera_uart altera_uart_ports[CONFIG_SERIAL_ALTERA_UART_MAXPORTS];
+
+#if defined(CONFIG_SERIAL_ALTERA_UART_CONSOLE)
+
+static void altera_uart_console_putc(struct uart_port *port, int c)
+{
+	while (!(altera_uart_readl(port, ALTERA_UART_STATUS_REG) &
+		 ALTERA_UART_STATUS_TRDY_MSK))
+		cpu_relax();
+
+	writel(c, port->membase + ALTERA_UART_TXDATA_REG);
+}
+
+static void altera_uart_console_write(struct console *co, const char *s,
+				      unsigned int count)
+{
+	struct uart_port *port = &(altera_uart_ports + co->index)->port;
+
+	uart_console_write(port, s, count, altera_uart_console_putc);
+}
+
+static int __init altera_uart_console_setup(struct console *co, char *options)
+{
+	struct uart_port *port;
+	int baud = CONFIG_SERIAL_ALTERA_UART_BAUDRATE;
+	int bits = 8;
+	int parity = 'n';
+	int flow = 'n';
+
+	if (co->index < 0 || co->index >= CONFIG_SERIAL_ALTERA_UART_MAXPORTS)
+		return -EINVAL;
+	port = &altera_uart_ports[co->index].port;
+	if (!port->membase)
+		return -ENODEV;
+
+	if (options)
+		uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+	return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static struct uart_driver altera_uart_driver;
+
+static struct console altera_uart_console = {
+	.name	= "ttyAL",
+	.write	= altera_uart_console_write,
+	.device	= uart_console_device,
+	.setup	= altera_uart_console_setup,
+	.flags	= CON_PRINTBUFFER,
+	.index	= -1,
+	.data	= &altera_uart_driver,
+};
+
+static int __init altera_uart_console_init(void)
+{
+	register_console(&altera_uart_console);
+	return 0;
+}
+
+console_initcall(altera_uart_console_init);
+
+#define	ALTERA_UART_CONSOLE	(&altera_uart_console)
+
+#else
+
+#define	ALTERA_UART_CONSOLE	NULL
+
+#endif /* CONFIG_ALTERA_UART_CONSOLE */
+
+/*
+ *	Define the altera_uart UART driver structure.
+ */
+static struct uart_driver altera_uart_driver = {
+	.owner		= THIS_MODULE,
+	.driver_name	= DRV_NAME,
+	.dev_name	= "ttyAL",
+	.major		= SERIAL_ALTERA_MAJOR,
+	.minor		= SERIAL_ALTERA_MINOR,
+	.nr		= CONFIG_SERIAL_ALTERA_UART_MAXPORTS,
+	.cons		= ALTERA_UART_CONSOLE,
+};
+
+#ifdef CONFIG_OF
+static int altera_uart_get_of_uartclk(struct platform_device *pdev,
+				      struct uart_port *port)
+{
+	int len;
+	const __be32 *clk;
+
+	clk = of_get_property(pdev->dev.of_node, "clock-frequency", &len);
+	if (!clk || len < sizeof(__be32))
+		return -ENODEV;
+
+	port->uartclk = be32_to_cpup(clk);
+
+	return 0;
+}
+#else
+static int altera_uart_get_of_uartclk(struct platform_device *pdev,
+				      struct uart_port *port)
+{
+	return -ENODEV;
+}
+#endif /* CONFIG_OF */
+
+static int altera_uart_probe(struct platform_device *pdev)
+{
+	struct altera_uart_platform_uart *platp = dev_get_platdata(&pdev->dev);
+	struct uart_port *port;
+	struct resource *res_mem;
+	struct resource *res_irq;
+	int i = pdev->id;
+	int ret;
+
+	/* if id is -1 scan for a free id and use that one */
+	if (i == -1) {
+		for (i = 0; i < CONFIG_SERIAL_ALTERA_UART_MAXPORTS; i++)
+			if (altera_uart_ports[i].port.mapbase == 0)
+				break;
+	}
+
+	if (i < 0 || i >= CONFIG_SERIAL_ALTERA_UART_MAXPORTS)
+		return -EINVAL;
+
+	port = &altera_uart_ports[i].port;
+
+	res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res_mem)
+		port->mapbase = res_mem->start;
+	else if (platp)
+		port->mapbase = platp->mapbase;
+	else
+		return -EINVAL;
+
+	res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (res_irq)
+		port->irq = res_irq->start;
+	else if (platp)
+		port->irq = platp->irq;
+
+	/* Check platform data first so we can override device node data */
+	if (platp)
+		port->uartclk = platp->uartclk;
+	else {
+		ret = altera_uart_get_of_uartclk(pdev, port);
+		if (ret)
+			return ret;
+	}
+
+	port->membase = ioremap(port->mapbase, ALTERA_UART_SIZE);
+	if (!port->membase)
+		return -ENOMEM;
+
+	if (platp)
+		port->regshift = platp->bus_shift;
+	else
+		port->regshift = 0;
+
+	port->line = i;
+	port->type = PORT_ALTERA_UART;
+	port->iotype = SERIAL_IO_MEM;
+	port->ops = &altera_uart_ops;
+	port->flags = UPF_BOOT_AUTOCONF;
+	port->dev = &pdev->dev;
+
+	platform_set_drvdata(pdev, port);
+
+	uart_add_one_port(&altera_uart_driver, port);
+
+	return 0;
+}
+
+static int altera_uart_remove(struct platform_device *pdev)
+{
+	struct uart_port *port = platform_get_drvdata(pdev);
+
+	if (port) {
+		uart_remove_one_port(&altera_uart_driver, port);
+		port->mapbase = 0;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id altera_uart_match[] = {
+	{ .compatible = "ALTR,uart-1.0", },
+	{ .compatible = "altr,uart-1.0", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, altera_uart_match);
+#endif /* CONFIG_OF */
+
+static struct platform_driver altera_uart_platform_driver = {
+	.probe	= altera_uart_probe,
+	.remove	= altera_uart_remove,
+	.driver	= {
+		.name		= DRV_NAME,
+		.of_match_table	= of_match_ptr(altera_uart_match),
+	},
+};
+
+static int __init altera_uart_init(void)
+{
+	int rc;
+
+	rc = uart_register_driver(&altera_uart_driver);
+	if (rc)
+		return rc;
+	rc = platform_driver_register(&altera_uart_platform_driver);
+	if (rc)
+		uart_unregister_driver(&altera_uart_driver);
+	return rc;
+}
+
+static void __exit altera_uart_exit(void)
+{
+	platform_driver_unregister(&altera_uart_platform_driver);
+	uart_unregister_driver(&altera_uart_driver);
+}
+
+module_init(altera_uart_init);
+module_exit(altera_uart_exit);
+
+MODULE_DESCRIPTION("Altera UART driver");
+MODULE_AUTHOR("Thomas Chou <thomas@wytron.com.tw>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRV_NAME);
+MODULE_ALIAS_CHARDEV_MAJOR(SERIAL_ALTERA_MAJOR);