These changes are the raw update to linux-4.4.6-rt14. Kernel sources

are taken from kernel.org, and rt patch from the rt wiki download page.

During the rebasing, the following patch collided:

Force tick interrupt and get rid of softirq magic(I70131fb85).

Collisions have been removed because its logic was found on the
source already.

Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>

1 files changed, 166 insertions, 110 deletions

diff --git a/kernel/drivers/tty/serial/8250/8250_omap.c b/kernel/drivers/tty/serial/8250/8250_omap.c
index dce1a2370..a2c0734c7 100644
--- a/kernel/drivers/tty/serial/8250/8250_omap.c
+++ b/kernel/drivers/tty/serial/8250/8250_omap.c
@@ -16,12 +16,14 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/of_gpio.h>
 #include <linux/of_irq.h>
 #include <linux/delay.h>
 #include <linux/pm_runtime.h>
 #include <linux/console.h>
 #include <linux/pm_qos.h>
+#include <linux/pm_wakeirq.h>
 #include <linux/dma-mapping.h>
 
 #include "8250.h"
@@ -31,6 +33,11 @@
 #define UART_ERRATA_i202_MDR1_ACCESS	(1 << 0)
 #define OMAP_UART_WER_HAS_TX_WAKEUP	(1 << 1)
 #define OMAP_DMA_TX_KICK		(1 << 2)
+/*
+ * See Advisory 21 in AM437x errata SPRZ408B, updated April 2015.
+ * The same errata is applicable to AM335x and DRA7x processors too.
+ */
+#define UART_ERRATA_CLOCK_DISABLE	(1 << 3)
 
 #define OMAP_UART_FCR_RX_TRIG		6
 #define OMAP_UART_FCR_TX_TRIG		4
@@ -52,6 +59,12 @@
 #define OMAP_UART_MVR_MAJ_SHIFT		8
 #define OMAP_UART_MVR_MIN_MASK		0x3f
 
+/* SYSC register bitmasks */
+#define OMAP_UART_SYSC_SOFTRESET	(1 << 1)
+
+/* SYSS register bitmasks */
+#define OMAP_UART_SYSS_RESETDONE	(1 << 0)
+
 #define UART_TI752_TLR_TX	0
 #define UART_TI752_TLR_RX	4
 
@@ -98,6 +111,8 @@ struct omap8250_priv {
 	struct pm_qos_request pm_qos_request;
 	struct work_struct qos_work;
 	struct uart_8250_dma omap8250_dma;
+	spinlock_t rx_dma_lock;
+	bool rx_dma_broken;
 };
 
 static u32 uart_read(struct uart_8250_port *up, u32 reg)
@@ -230,6 +245,15 @@ static void omap8250_update_scr(struct uart_8250_port *up,
 	serial_out(up, UART_OMAP_SCR, priv->scr);
 }
 
+static void omap8250_update_mdr1(struct uart_8250_port *up,
+				 struct omap8250_priv *priv)
+{
+	if (priv->habit & UART_ERRATA_i202_MDR1_ACCESS)
+		omap_8250_mdr1_errataset(up, priv);
+	else
+		serial_out(up, UART_OMAP_MDR1, priv->mdr1);
+}
+
 static void omap8250_restore_regs(struct uart_8250_port *up)
 {
 	struct omap8250_priv *priv = up->port.private_data;
@@ -280,11 +304,9 @@ static void omap8250_restore_regs(struct uart_8250_port *up)
 	serial_out(up, UART_XOFF1, priv->xoff);
 
 	serial_out(up, UART_LCR, up->lcr);
-	/* need mode A for FCR */
-	if (priv->habit & UART_ERRATA_i202_MDR1_ACCESS)
-		omap_8250_mdr1_errataset(up, priv);
-	else
-		serial_out(up, UART_OMAP_MDR1, priv->mdr1);
+
+	omap8250_update_mdr1(up, priv);
+
 	up->port.ops->set_mctrl(&up->port, up->port.mctrl);
 }
 
@@ -417,7 +439,6 @@ static void omap_8250_set_termios(struct uart_port *port,
 	priv->xoff = termios->c_cc[VSTOP];
 
 	priv->efr = 0;
-	up->mcr &= ~(UART_MCR_RTS | UART_MCR_XONANY);
 	up->port.status &= ~(UPSTAT_AUTOCTS | UPSTAT_AUTORTS | UPSTAT_AUTOXOFF);
 
 	if (termios->c_cflag & CRTSCTS && up->port.flags & UPF_HARD_FLOW) {
@@ -426,12 +447,9 @@ static void omap_8250_set_termios(struct uart_port *port,
 		priv->efr |= UART_EFR_CTS;
 	} else	if (up->port.flags & UPF_SOFT_FLOW) {
 		/*
-		 * IXON Flag:
-		 * Enable XON/XOFF flow control on input.
-		 * Receiver compares XON1, XOFF1.
+		 * OMAP rx s/w flow control is borked; the transmitter remains
+		 * stuck off even if rx flow control is subsequently disabled
 		 */
-		if (termios->c_iflag & IXON)
-			priv->efr |= OMAP_UART_SW_RX;
 
 		/*
 		 * IXOFF Flag:
@@ -442,15 +460,6 @@ static void omap_8250_set_termios(struct uart_port *port,
 			up->port.status |= UPSTAT_AUTOXOFF;
 			priv->efr |= OMAP_UART_SW_TX;
 		}
-
-		/*
-		 * IXANY Flag:
-		 * Enable any character to restart output.
-		 * Operation resumes after receiving any
-		 * character after recognition of the XOFF character
-		 */
-		if (termios->c_iflag & IXANY)
-			up->mcr |= UART_MCR_XONANY;
 	}
 	omap8250_restore_regs(up);
 
@@ -528,14 +537,14 @@ static void omap_serial_fill_features_erratas(struct uart_8250_port *up,
 
 	switch (revision) {
 	case OMAP_UART_REV_46:
-		priv->habit = UART_ERRATA_i202_MDR1_ACCESS;
+		priv->habit |= UART_ERRATA_i202_MDR1_ACCESS;
 		break;
 	case OMAP_UART_REV_52:
-		priv->habit = UART_ERRATA_i202_MDR1_ACCESS |
+		priv->habit |= UART_ERRATA_i202_MDR1_ACCESS |
 				OMAP_UART_WER_HAS_TX_WAKEUP;
 		break;
 	case OMAP_UART_REV_63:
-		priv->habit = UART_ERRATA_i202_MDR1_ACCESS |
+		priv->habit |= UART_ERRATA_i202_MDR1_ACCESS |
 			OMAP_UART_WER_HAS_TX_WAKEUP;
 		break;
 	default:
@@ -551,17 +560,6 @@ static void omap8250_uart_qos_work(struct work_struct *work)
 	pm_qos_update_request(&priv->pm_qos_request, priv->latency);
 }
 
-static irqreturn_t omap_wake_irq(int irq, void *dev_id)
-{
-	struct uart_port *port = dev_id;
-	int ret;
-
-	ret = port->handle_irq(port);
-	if (ret)
-		return IRQ_HANDLED;
-	return IRQ_NONE;
-}
-
 #ifdef CONFIG_SERIAL_8250_DMA
 static int omap_8250_dma_handle_irq(struct uart_port *port);
 #endif
@@ -595,11 +593,9 @@ static int omap_8250_startup(struct uart_port *port)
 	int ret;
 
 	if (priv->wakeirq) {
-		ret = request_irq(priv->wakeirq, omap_wake_irq,
-				  port->irqflags, "uart wakeup irq", port);
+		ret = dev_pm_set_dedicated_wake_irq(port->dev, priv->wakeirq);
 		if (ret)
 			return ret;
-		disable_irq(priv->wakeirq);
 	}
 
 	pm_runtime_get_sync(port->dev);
@@ -648,8 +644,7 @@ static int omap_8250_startup(struct uart_port *port)
 err:
 	pm_runtime_mark_last_busy(port->dev);
 	pm_runtime_put_autosuspend(port->dev);
-	if (priv->wakeirq)
-		free_irq(priv->wakeirq, port);
+	dev_pm_clear_wake_irq(port->dev);
 	return ret;
 }
 
@@ -681,10 +676,8 @@ static void omap_8250_shutdown(struct uart_port *port)
 
 	pm_runtime_mark_last_busy(port->dev);
 	pm_runtime_put_autosuspend(port->dev);
-
 	free_irq(port->irq, port);
-	if (priv->wakeirq)
-		free_irq(priv->wakeirq, port);
+	dev_pm_clear_wake_irq(port->dev);
 }
 
 static void omap_8250_throttle(struct uart_port *port)
@@ -726,22 +719,35 @@ static int omap_8250_rx_dma(struct uart_8250_port *p, unsigned int iir);
 
 static void __dma_rx_do_complete(struct uart_8250_port *p, bool error)
 {
+	struct omap8250_priv	*priv = p->port.private_data;
 	struct uart_8250_dma    *dma = p->dma;
 	struct tty_port         *tty_port = &p->port.state->port;
 	struct dma_tx_state     state;
 	int                     count;
+	unsigned long		flags;
+	int			ret;
 
 	dma_sync_single_for_cpu(dma->rxchan->device->dev, dma->rx_addr,
 				dma->rx_size, DMA_FROM_DEVICE);
 
+	spin_lock_irqsave(&priv->rx_dma_lock, flags);
+
+	if (!dma->rx_running)
+		goto unlock;
+
 	dma->rx_running = 0;
 	dmaengine_tx_status(dma->rxchan, dma->rx_cookie, &state);
 	dmaengine_terminate_all(dma->rxchan);
 
 	count = dma->rx_size - state.residue;
 
-	tty_insert_flip_string(tty_port, dma->rx_buf, count);
-	p->port.icount.rx += count;
+	ret = tty_insert_flip_string(tty_port, dma->rx_buf, count);
+
+	p->port.icount.rx += ret;
+	p->port.icount.buf_overrun += count - ret;
+unlock:
+	spin_unlock_irqrestore(&priv->rx_dma_lock, flags);
+
 	if (!error)
 		omap_8250_rx_dma(p, 0);
 
@@ -753,28 +759,48 @@ static void __dma_rx_complete(void *param)
 	__dma_rx_do_complete(param, false);
 }
 
+static void omap_8250_rx_dma_flush(struct uart_8250_port *p)
+{
+	struct omap8250_priv	*priv = p->port.private_data;
+	struct uart_8250_dma	*dma = p->dma;
+	unsigned long		flags;
+	int ret;
+
+	spin_lock_irqsave(&priv->rx_dma_lock, flags);
+
+	if (!dma->rx_running) {
+		spin_unlock_irqrestore(&priv->rx_dma_lock, flags);
+		return;
+	}
+
+	ret = dmaengine_pause(dma->rxchan);
+	if (WARN_ON_ONCE(ret))
+		priv->rx_dma_broken = true;
+
+	spin_unlock_irqrestore(&priv->rx_dma_lock, flags);
+
+	__dma_rx_do_complete(p, true);
+}
+
 static int omap_8250_rx_dma(struct uart_8250_port *p, unsigned int iir)
 {
+	struct omap8250_priv		*priv = p->port.private_data;
 	struct uart_8250_dma            *dma = p->dma;
+	int				err = 0;
 	struct dma_async_tx_descriptor  *desc;
+	unsigned long			flags;
 
 	switch (iir & 0x3f) {
 	case UART_IIR_RLSI:
 		/* 8250_core handles errors and break interrupts */
-		if (dma->rx_running) {
-			dmaengine_pause(dma->rxchan);
-			__dma_rx_do_complete(p, true);
-		}
+		omap_8250_rx_dma_flush(p);
 		return -EIO;
 	case UART_IIR_RX_TIMEOUT:
 		/*
 		 * If RCVR FIFO trigger level was not reached, complete the
 		 * transfer and let 8250_core copy the remaining data.
 		 */
-		if (dma->rx_running) {
-			dmaengine_pause(dma->rxchan);
-			__dma_rx_do_complete(p, true);
-		}
+		omap_8250_rx_dma_flush(p);
 		return -ETIMEDOUT;
 	case UART_IIR_RDI:
 		/*
@@ -786,24 +812,28 @@ static int omap_8250_rx_dma(struct uart_8250_port *p, unsigned int iir)
 		 * the DMA won't do anything soon so we have to cancel the DMA
 		 * transfer and purge the FIFO manually.
 		 */
-		if (dma->rx_running) {
-			dmaengine_pause(dma->rxchan);
-			__dma_rx_do_complete(p, true);
-		}
+		omap_8250_rx_dma_flush(p);
 		return -ETIMEDOUT;
 
 	default:
 		break;
 	}
 
+	if (priv->rx_dma_broken)
+		return -EINVAL;
+
+	spin_lock_irqsave(&priv->rx_dma_lock, flags);
+
 	if (dma->rx_running)
-		return 0;
+		goto out;
 
 	desc = dmaengine_prep_slave_single(dma->rxchan, dma->rx_addr,
 					   dma->rx_size, DMA_DEV_TO_MEM,
 					   DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
-	if (!desc)
-		return -EBUSY;
+	if (!desc) {
+		err = -EBUSY;
+		goto out;
+	}
 
 	dma->rx_running = 1;
 	desc->callback = __dma_rx_complete;
@@ -815,7 +845,9 @@ static int omap_8250_rx_dma(struct uart_8250_port *p, unsigned int iir)
 				   dma->rx_size, DMA_FROM_DEVICE);
 
 	dma_async_issue_pending(dma->rxchan);
-	return 0;
+out:
+	spin_unlock_irqrestore(&priv->rx_dma_lock, flags);
+	return err;
 }
 
 static int omap_8250_tx_dma(struct uart_8250_port *p);
@@ -1038,6 +1070,20 @@ static int omap8250_no_handle_irq(struct uart_port *port)
 	return 0;
 }
 
+static const u8 am3352_habit = OMAP_DMA_TX_KICK | UART_ERRATA_CLOCK_DISABLE;
+static const u8 am4372_habit = UART_ERRATA_CLOCK_DISABLE;
+
+static const struct of_device_id omap8250_dt_ids[] = {
+	{ .compatible = "ti,omap2-uart" },
+	{ .compatible = "ti,omap3-uart" },
+	{ .compatible = "ti,omap4-uart" },
+	{ .compatible = "ti,am3352-uart", .data = &am3352_habit, },
+	{ .compatible = "ti,am4372-uart", .data = &am4372_habit, },
+	{ .compatible = "ti,dra742-uart", .data = &am4372_habit, },
+	{},
+};
+MODULE_DEVICE_TABLE(of, omap8250_dt_ids);
+
 static int omap8250_probe(struct platform_device *pdev)
 {
 	struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -1102,11 +1148,17 @@ static int omap8250_probe(struct platform_device *pdev)
 	up.port.unthrottle = omap_8250_unthrottle;
 
 	if (pdev->dev.of_node) {
+		const struct of_device_id *id;
+
 		ret = of_alias_get_id(pdev->dev.of_node, "serial");
 
 		of_property_read_u32(pdev->dev.of_node, "clock-frequency",
 				     &up.port.uartclk);
 		priv->wakeirq = irq_of_parse_and_map(pdev->dev.of_node, 1);
+
+		id = of_match_device(of_match_ptr(omap8250_dt_ids), &pdev->dev);
+		if (id && id->data)
+			priv->habit |= *(u8 *)id->data;
 	} else {
 		ret = pdev->id;
 	}
@@ -1129,6 +1181,8 @@ static int omap8250_probe(struct platform_device *pdev)
 			   priv->latency);
 	INIT_WORK(&priv->qos_work, omap8250_uart_qos_work);
 
+	spin_lock_init(&priv->rx_dma_lock);
+
 	device_init_wakeup(&pdev->dev, true);
 	pm_runtime_use_autosuspend(&pdev->dev);
 	pm_runtime_set_autosuspend_delay(&pdev->dev, -1);
@@ -1162,6 +1216,11 @@ static int omap8250_probe(struct platform_device *pdev)
 
 			if (of_machine_is_compatible("ti,am33xx"))
 				priv->habit |= OMAP_DMA_TX_KICK;
+			/*
+			 * pause is currently not supported atleast on omap-sdma
+			 * and edma on most earlier kernels.
+			 */
+			priv->rx_dma_broken = true;
 		}
 	}
 #endif
@@ -1193,31 +1252,6 @@ static int omap8250_remove(struct platform_device *pdev)
 	return 0;
 }
 
-#ifdef CONFIG_PM
-
-static inline void omap8250_enable_wakeirq(struct omap8250_priv *priv,
-					   bool enable)
-{
-	if (!priv->wakeirq)
-		return;
-
-	if (enable)
-		enable_irq(priv->wakeirq);
-	else
-		disable_irq_nosync(priv->wakeirq);
-}
-
-static void omap8250_enable_wakeup(struct omap8250_priv *priv,
-				   bool enable)
-{
-	if (enable == priv->wakeups_enabled)
-		return;
-
-	omap8250_enable_wakeirq(priv, enable);
-	priv->wakeups_enabled = enable;
-}
-#endif
-
 #ifdef CONFIG_PM_SLEEP
 static int omap8250_prepare(struct device *dev)
 {
@@ -1244,11 +1278,6 @@ static int omap8250_suspend(struct device *dev)
 
 	serial8250_suspend_port(priv->line);
 	flush_work(&priv->qos_work);
-
-	if (device_may_wakeup(dev))
-		omap8250_enable_wakeup(priv, true);
-	else
-		omap8250_enable_wakeup(priv, false);
 	return 0;
 }
 
@@ -1256,9 +1285,6 @@ static int omap8250_resume(struct device *dev)
 {
 	struct omap8250_priv *priv = dev_get_drvdata(dev);
 
-	if (device_may_wakeup(dev))
-		omap8250_enable_wakeup(priv, false);
-
 	serial8250_resume_port(priv->line);
 	return 0;
 }
@@ -1272,17 +1298,46 @@ static int omap8250_lost_context(struct uart_8250_port *up)
 {
 	u32 val;
 
-	val = serial_in(up, UART_OMAP_MDR1);
+	val = serial_in(up, UART_OMAP_SCR);
 	/*
-	 * If we lose context, then MDR1 is set to its reset value which is
-	 * UART_OMAP_MDR1_DISABLE. After set_termios() we set it either to 13x
-	 * or 16x but never to disable again.
+	 * If we lose context, then SCR is set to its reset value of zero.
+	 * After set_termios() we set bit 3 of SCR (TX_EMPTY_CTL_IT) to 1,
+	 * among other bits, to never set the register back to zero again.
 	 */
-	if (val == UART_OMAP_MDR1_DISABLE)
+	if (!val)
 		return 1;
 	return 0;
 }
 
+/* TODO: in future, this should happen via API in drivers/reset/ */
+static int omap8250_soft_reset(struct device *dev)
+{
+	struct omap8250_priv *priv = dev_get_drvdata(dev);
+	struct uart_8250_port *up = serial8250_get_port(priv->line);
+	int timeout = 100;
+	int sysc;
+	int syss;
+
+	sysc = serial_in(up, UART_OMAP_SYSC);
+
+	/* softreset the UART */
+	sysc |= OMAP_UART_SYSC_SOFTRESET;
+	serial_out(up, UART_OMAP_SYSC, sysc);
+
+	/* By experiments, 1us enough for reset complete on AM335x */
+	do {
+		udelay(1);
+		syss = serial_in(up, UART_OMAP_SYSS);
+	} while (--timeout && !(syss & OMAP_UART_SYSS_RESETDONE));
+
+	if (!timeout) {
+		dev_err(dev, "timed out waiting for reset done\n");
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
 static int omap8250_runtime_suspend(struct device *dev)
 {
 	struct omap8250_priv *priv = dev_get_drvdata(dev);
@@ -1300,8 +1355,18 @@ static int omap8250_runtime_suspend(struct device *dev)
 			return -EBUSY;
 	}
 
-	omap8250_enable_wakeup(priv, true);
-	if (up->dma)
+	if (priv->habit & UART_ERRATA_CLOCK_DISABLE) {
+		int ret;
+
+		ret = omap8250_soft_reset(dev);
+		if (ret)
+			return ret;
+
+		/* Restore to UART mode after reset (for wakeup) */
+		omap8250_update_mdr1(up, priv);
+	}
+
+	if (up->dma && up->dma->rxchan)
 		omap_8250_rx_dma(up, UART_IIR_RX_TIMEOUT);
 
 	priv->latency = PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE;
@@ -1321,13 +1386,12 @@ static int omap8250_runtime_resume(struct device *dev)
 		return 0;
 
 	up = serial8250_get_port(priv->line);
-	omap8250_enable_wakeup(priv, false);
 	loss_cntx = omap8250_lost_context(up);
 
 	if (loss_cntx)
 		omap8250_restore_regs(up);
 
-	if (up->dma)
+	if (up->dma && up->dma->rxchan)
 		omap_8250_rx_dma(up, 0);
 
 	priv->latency = priv->calc_latency;
@@ -1384,14 +1448,6 @@ static const struct dev_pm_ops omap8250_dev_pm_ops = {
 	.complete       = omap8250_complete,
 };
 
-static const struct of_device_id omap8250_dt_ids[] = {
-	{ .compatible = "ti,omap2-uart" },
-	{ .compatible = "ti,omap3-uart" },
-	{ .compatible = "ti,omap4-uart" },
-	{},
-};
-MODULE_DEVICE_TABLE(of, omap8250_dt_ids);
-
 static struct platform_driver omap8250_platform_driver = {
 	.driver = {
 		.name		= "omap8250",