summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/tty/serial/8250/8250_mid.c
diff options
context:
space:
mode:
authorYunhong Jiang <yunhong.jiang@linux.intel.com>2017-03-08 23:13:28 -0800
committerYunhong Jiang <yunhong.jiang@linux.intel.com>2017-03-08 23:36:15 -0800
commit52f993b8e89487ec9ee15a7fb4979e0f09a45b27 (patch)
treed65304486afe0bea4a311c783c0d72791c8c0aa2 /kernel/drivers/tty/serial/8250/8250_mid.c
parentc189ccac5702322ed843fe17057035b7222a59b6 (diff)
Upgrade to 4.4.50-rt62
The current kernel is based on rt kernel v4.4.6-rt14. We will upgrade it to 4.4.50-rt62. The command to achieve it is: a) Clone a git repo from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-stable-rt.git b) Get the diff between this two changesets: git diff 640eca2901f3435e616157b11379d3223a44b391 705619beeea1b0b48219a683fd1a901a86fdaf5e where the two commits are: [yjiang5@jnakajim-build linux-stable-rt]$ git show --oneline --name-only 640eca2901f3435e616157b11379d3223a44b391 640eca2901f3 v4.4.6-rt14 localversion-rt [yjiang5@jnakajim-build linux-stable-rt]$ git show --oneline --name-only 705619beeea1b0b48219a683fd1a901a86fdaf5e 705619beeea1 Linux 4.4.50-rt62 localversion-rt c) One patch has been backported thus revert the patch before applying. filterdiff -p1 -x scripts/package/Makefile ~/tmp/v4.4.6-rt14-4.4.50-rt62.diff |patch -p1 --dry-run Upstream status: backport Change-Id: I244d57a32f6066e5a5b9915f9fbf99e7bbca6e01 Signed-off-by: Yunhong Jiang <yunhong.jiang@linux.intel.com>
Diffstat (limited to 'kernel/drivers/tty/serial/8250/8250_mid.c')
-rw-r--r--kernel/drivers/tty/serial/8250/8250_mid.c38
1 files changed, 25 insertions, 13 deletions
diff --git a/kernel/drivers/tty/serial/8250/8250_mid.c b/kernel/drivers/tty/serial/8250/8250_mid.c
index 88531a36b..83b3988eb 100644
--- a/kernel/drivers/tty/serial/8250/8250_mid.c
+++ b/kernel/drivers/tty/serial/8250/8250_mid.c
@@ -14,6 +14,7 @@
#include <linux/pci.h>
#include <linux/dma/hsu.h>
+#include <linux/8250_pci.h>
#include "8250.h"
@@ -24,6 +25,7 @@
#define PCI_DEVICE_ID_INTEL_DNV_UART 0x19d8
/* Intel MID Specific registers */
+#define INTEL_MID_UART_DNV_FISR 0x08
#define INTEL_MID_UART_PS 0x30
#define INTEL_MID_UART_MUL 0x34
#define INTEL_MID_UART_DIV 0x38
@@ -31,6 +33,7 @@
struct mid8250;
struct mid8250_board {
+ unsigned int flags;
unsigned long freq;
unsigned int base_baud;
int (*setup)(struct mid8250 *, struct uart_port *p);
@@ -88,16 +91,16 @@ static int tng_setup(struct mid8250 *mid, struct uart_port *p)
static int dnv_handle_irq(struct uart_port *p)
{
struct mid8250 *mid = p->private_data;
- int ret;
-
- ret = hsu_dma_irq(&mid->dma_chip, 0);
- ret |= hsu_dma_irq(&mid->dma_chip, 1);
-
- /* For now, letting the HW generate separate interrupt for the UART */
- if (ret)
- return ret;
-
- return serial8250_handle_irq(p, serial_port_in(p, UART_IIR));
+ unsigned int fisr = serial_port_in(p, INTEL_MID_UART_DNV_FISR);
+ int ret = IRQ_NONE;
+
+ if (fisr & BIT(2))
+ ret |= hsu_dma_irq(&mid->dma_chip, 1);
+ if (fisr & BIT(1))
+ ret |= hsu_dma_irq(&mid->dma_chip, 0);
+ if (fisr & BIT(0))
+ ret |= serial8250_handle_irq(p, serial_port_in(p, UART_IIR));
+ return ret;
}
#define DNV_DMA_CHAN_OFFSET 0x80
@@ -106,12 +109,13 @@ static int dnv_setup(struct mid8250 *mid, struct uart_port *p)
{
struct hsu_dma_chip *chip = &mid->dma_chip;
struct pci_dev *pdev = to_pci_dev(p->dev);
+ unsigned int bar = FL_GET_BASE(mid->board->flags);
int ret;
chip->dev = &pdev->dev;
chip->irq = pdev->irq;
chip->regs = p->membase;
- chip->length = pci_resource_len(pdev, 0);
+ chip->length = pci_resource_len(pdev, bar);
chip->offset = DNV_DMA_CHAN_OFFSET;
/* Falling back to PIO mode if DMA probing fails */
@@ -145,6 +149,9 @@ static void mid8250_set_termios(struct uart_port *p,
unsigned long w = BIT(24) - 1;
unsigned long mul, div;
+ /* Gracefully handle the B0 case: fall back to B9600 */
+ fuart = fuart ? fuart : 9600 * 16;
+
if (mid->board->freq < fuart) {
/* Find prescaler value that satisfies Fuart < Fref */
if (mid->board->freq > baud)
@@ -217,6 +224,7 @@ static int mid8250_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
struct uart_8250_port uart;
struct mid8250 *mid;
+ unsigned int bar;
int ret;
ret = pcim_enable_device(pdev);
@@ -230,6 +238,7 @@ static int mid8250_probe(struct pci_dev *pdev, const struct pci_device_id *id)
return -ENOMEM;
mid->board = (struct mid8250_board *)id->driver_data;
+ bar = FL_GET_BASE(mid->board->flags);
memset(&uart, 0, sizeof(struct uart_8250_port));
@@ -242,8 +251,8 @@ static int mid8250_probe(struct pci_dev *pdev, const struct pci_device_id *id)
uart.port.flags = UPF_SHARE_IRQ | UPF_FIXED_PORT | UPF_FIXED_TYPE;
uart.port.set_termios = mid8250_set_termios;
- uart.port.mapbase = pci_resource_start(pdev, 0);
- uart.port.membase = pcim_iomap(pdev, 0, 0);
+ uart.port.mapbase = pci_resource_start(pdev, bar);
+ uart.port.membase = pcim_iomap(pdev, bar, 0);
if (!uart.port.membase)
return -ENOMEM;
@@ -282,18 +291,21 @@ static void mid8250_remove(struct pci_dev *pdev)
}
static const struct mid8250_board pnw_board = {
+ .flags = FL_BASE0,
.freq = 50000000,
.base_baud = 115200,
.setup = pnw_setup,
};
static const struct mid8250_board tng_board = {
+ .flags = FL_BASE0,
.freq = 38400000,
.base_baud = 1843200,
.setup = tng_setup,
};
static const struct mid8250_board dnv_board = {
+ .flags = FL_BASE1,
.freq = 133333333,
.base_baud = 115200,
.setup = dnv_setup,