These changes are the raw update to linux-4.4.6-rt14. Kernel sources

are taken from kernel.org, and rt patch from the rt wiki download page.

During the rebasing, the following patch collided:

Force tick interrupt and get rid of softirq magic(I70131fb85).

Collisions have been removed because its logic was found on the
source already.

Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>

1 files changed, 64 insertions, 54 deletions

diff --git a/kernel/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/kernel/drivers/thermal/ti-soc-thermal/ti-bandgap.c
index bc14dc874..1e34a1efc 100644
--- a/kernel/drivers/thermal/ti-soc-thermal/ti-bandgap.c
+++ b/kernel/drivers/thermal/ti-soc-thermal/ti-bandgap.c
@@ -43,6 +43,8 @@
 
 #include "ti-bandgap.h"
 
+static int ti_bandgap_force_single_read(struct ti_bandgap *bgp, int id);
+
 /***   Helper functions to access registers and their bitfields   ***/
 
 /**
@@ -103,19 +105,15 @@ do {								\
  */
 static int ti_bandgap_power(struct ti_bandgap *bgp, bool on)
 {
-	int i, ret = 0;
+	int i;
 
-	if (!TI_BANDGAP_HAS(bgp, POWER_SWITCH)) {
-		ret = -ENOTSUPP;
-		goto exit;
-	}
+	if (!TI_BANDGAP_HAS(bgp, POWER_SWITCH))
+		return -ENOTSUPP;
 
 	for (i = 0; i < bgp->conf->sensor_count; i++)
 		/* active on 0 */
 		RMW_BITS(bgp, i, temp_sensor_ctrl, bgap_tempsoff_mask, !on);
-
-exit:
-	return ret;
+	return 0;
 }
 
 /**
@@ -298,18 +296,13 @@ static
 int ti_bandgap_adc_to_mcelsius(struct ti_bandgap *bgp, int adc_val, int *t)
 {
 	const struct ti_bandgap_data *conf = bgp->conf;
-	int ret = 0;
 
 	/* look up for temperature in the table and return the temperature */
-	if (adc_val < conf->adc_start_val || adc_val > conf->adc_end_val) {
-		ret = -ERANGE;
-		goto exit;
-	}
+	if (adc_val < conf->adc_start_val || adc_val > conf->adc_end_val)
+		return -ERANGE;
 
 	*t = bgp->conf->conv_table[adc_val - conf->adc_start_val];
-
-exit:
-	return ret;
+	return 0;
 }
 
 /**
@@ -330,16 +323,14 @@ int ti_bandgap_mcelsius_to_adc(struct ti_bandgap *bgp, long temp, int *adc)
 {
 	const struct ti_bandgap_data *conf = bgp->conf;
 	const int *conv_table = bgp->conf->conv_table;
-	int high, low, mid, ret = 0;
+	int high, low, mid;
 
 	low = 0;
 	high = conf->adc_end_val - conf->adc_start_val;
 	mid = (high + low) / 2;
 
-	if (temp < conv_table[low] || temp > conv_table[high]) {
-		ret = -ERANGE;
-		goto exit;
-	}
+	if (temp < conv_table[low] || temp > conv_table[high])
+		return -ERANGE;
 
 	while (low < high) {
 		if (temp < conv_table[mid])
@@ -350,9 +341,7 @@ int ti_bandgap_mcelsius_to_adc(struct ti_bandgap *bgp, long temp, int *adc)
 	}
 
 	*adc = conf->adc_start_val + low;
-
-exit:
-	return ret;
+	return 0;
 }
 
 /**
@@ -378,13 +367,11 @@ int ti_bandgap_add_hyst(struct ti_bandgap *bgp, int adc_val, int hyst_val,
 	 */
 	ret = ti_bandgap_adc_to_mcelsius(bgp, adc_val, &temp);
 	if (ret < 0)
-		goto exit;
+		return ret;
 
 	temp += hyst_val;
 
 	ret = ti_bandgap_mcelsius_to_adc(bgp, temp, sum);
-
-exit:
 	return ret;
 }
 
@@ -542,22 +529,18 @@ exit:
  */
 static inline int ti_bandgap_validate(struct ti_bandgap *bgp, int id)
 {
-	int ret = 0;
-
 	if (!bgp || IS_ERR(bgp)) {
 		pr_err("%s: invalid bandgap pointer\n", __func__);
-		ret = -EINVAL;
-		goto exit;
+		return -EINVAL;
 	}
 
 	if ((id < 0) || (id >= bgp->conf->sensor_count)) {
 		dev_err(bgp->dev, "%s: sensor id out of range (%d)\n",
 			__func__, id);
-		ret = -ERANGE;
+		return -ERANGE;
 	}
 
-exit:
-	return ret;
+	return 0;
 }
 
 /**
@@ -585,12 +568,10 @@ static int _ti_bandgap_write_threshold(struct ti_bandgap *bgp, int id, int val,
 
 	ret = ti_bandgap_validate(bgp, id);
 	if (ret)
-		goto exit;
+		return ret;
 
-	if (!TI_BANDGAP_HAS(bgp, TALERT)) {
-		ret = -ENOTSUPP;
-		goto exit;
-	}
+	if (!TI_BANDGAP_HAS(bgp, TALERT))
+		return -ENOTSUPP;
 
 	ts_data = bgp->conf->sensors[id].ts_data;
 	tsr = bgp->conf->sensors[id].registers;
@@ -603,17 +584,15 @@ static int _ti_bandgap_write_threshold(struct ti_bandgap *bgp, int id, int val,
 	}
 
 	if (ret)
-		goto exit;
+		return ret;
 
 	ret = ti_bandgap_mcelsius_to_adc(bgp, val, &adc_val);
 	if (ret < 0)
-		goto exit;
+		return ret;
 
 	spin_lock(&bgp->lock);
 	ret = ti_bandgap_update_alert_threshold(bgp, id, adc_val, hot);
 	spin_unlock(&bgp->lock);
-
-exit:
 	return ret;
 }
 
@@ -656,7 +635,7 @@ static int _ti_bandgap_read_threshold(struct ti_bandgap *bgp, int id,
 
 	temp = ti_bandgap_readl(bgp, tsr->bgap_threshold);
 	temp = (temp & mask) >> __ffs(mask);
-	ret |= ti_bandgap_adc_to_mcelsius(bgp, temp, &temp);
+	ret = ti_bandgap_adc_to_mcelsius(bgp, temp, &temp);
 	if (ret) {
 		dev_err(bgp->dev, "failed to read thot\n");
 		ret = -EIO;
@@ -926,11 +905,17 @@ int ti_bandgap_read_temperature(struct ti_bandgap *bgp, int id,
 	if (ret)
 		return ret;
 
+	if (!TI_BANDGAP_HAS(bgp, MODE_CONFIG)) {
+		ret = ti_bandgap_force_single_read(bgp, id);
+		if (ret)
+			return ret;
+	}
+
 	spin_lock(&bgp->lock);
 	temp = ti_bandgap_read_temp(bgp, id);
 	spin_unlock(&bgp->lock);
 
-	ret |= ti_bandgap_adc_to_mcelsius(bgp, temp, &temp);
+	ret = ti_bandgap_adc_to_mcelsius(bgp, temp, &temp);
 	if (ret)
 		return -EIO;
 
@@ -991,7 +976,8 @@ void *ti_bandgap_get_sensor_data(struct ti_bandgap *bgp, int id)
 static int
 ti_bandgap_force_single_read(struct ti_bandgap *bgp, int id)
 {
-	u32 temp = 0, counter = 1000;
+	u32 counter = 1000;
+	struct temp_sensor_registers *tsr;
 
 	/* Select single conversion mode */
 	if (TI_BANDGAP_HAS(bgp, MODE_CONFIG))
@@ -999,16 +985,27 @@ ti_bandgap_force_single_read(struct ti_bandgap *bgp, int id)
 
 	/* Start of Conversion = 1 */
 	RMW_BITS(bgp, id, temp_sensor_ctrl, bgap_soc_mask, 1);
-	/* Wait until DTEMP is updated */
-	temp = ti_bandgap_read_temp(bgp, id);
 
-	while ((temp == 0) && --counter)
-		temp = ti_bandgap_read_temp(bgp, id);
-	/* REVISIT: Check correct condition for end of conversion */
+	/* Wait for EOCZ going up */
+	tsr = bgp->conf->sensors[id].registers;
+
+	while (--counter) {
+		if (ti_bandgap_readl(bgp, tsr->temp_sensor_ctrl) &
+		    tsr->bgap_eocz_mask)
+			break;
+	}
 
 	/* Start of Conversion = 0 */
 	RMW_BITS(bgp, id, temp_sensor_ctrl, bgap_soc_mask, 0);
 
+	/* Wait for EOCZ going down */
+	counter = 1000;
+	while (--counter) {
+		if (!(ti_bandgap_readl(bgp, tsr->temp_sensor_ctrl) &
+		      tsr->bgap_eocz_mask))
+			break;
+	}
+
 	return 0;
 }
 
@@ -1277,6 +1274,10 @@ int ti_bandgap_probe(struct platform_device *pdev)
 	}
 	bgp->dev = &pdev->dev;
 
+	if (TI_BANDGAP_HAS(bgp, UNRELIABLE))
+		dev_warn(&pdev->dev,
+			 "This OMAP thermal sensor is unreliable. You've been warned\n");
+
 	if (TI_BANDGAP_HAS(bgp, TSHUT)) {
 		ret = ti_bandgap_tshut_init(bgp, pdev);
 		if (ret) {
@@ -1294,11 +1295,10 @@ int ti_bandgap_probe(struct platform_device *pdev)
 		goto free_irqs;
 	}
 
-	bgp->div_clk = clk_get(NULL,  bgp->conf->div_ck_name);
+	bgp->div_clk = clk_get(NULL, bgp->conf->div_ck_name);
 	ret = IS_ERR(bgp->div_clk);
 	if (ret) {
-		dev_err(&pdev->dev,
-			"failed to request div_ts_ck clock ref\n");
+		dev_err(&pdev->dev, "failed to request div_ts_ck clock ref\n");
 		ret = PTR_ERR(bgp->div_clk);
 		goto free_irqs;
 	}
@@ -1583,6 +1583,16 @@ static SIMPLE_DEV_PM_OPS(ti_bandgap_dev_pm_ops, ti_bandgap_suspend,
 #endif
 
 static const struct of_device_id of_ti_bandgap_match[] = {
+#ifdef CONFIG_OMAP3_THERMAL
+	{
+		.compatible = "ti,omap34xx-bandgap",
+		.data = (void *)&omap34xx_data,
+	},
+	{
+		.compatible = "ti,omap36xx-bandgap",
+		.data = (void *)&omap36xx_data,
+	},
+#endif
 #ifdef CONFIG_OMAP4_THERMAL
 	{
 		.compatible = "ti,omap4430-bandgap",