Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

1 files changed, 102 insertions, 0 deletions

diff --git a/kernel/drivers/scsi/sun3_scsi.h b/kernel/drivers/scsi/sun3_scsi.h
new file mode 100644
index 000000000..d22745fae
--- /dev/null
+++ b/kernel/drivers/scsi/sun3_scsi.h
@@ -0,0 +1,102 @@
+/*
+ * Sun3 SCSI stuff by Erik Verbruggen (erik@bigmama.xtdnet.nl)
+ *
+ * Sun3 DMA additions by Sam Creasey (sammy@sammy.net)
+ *
+ * Adapted from mac_scsinew.h:
+ */
+/*
+ * Cumana Generic NCR5380 driver defines
+ *
+ * Copyright 1993, Drew Eckhardt
+ *	Visionary Computing
+ *	(Unix and Linux consulting and custom programming)
+ *	drew@colorado.edu
+ *      +1 (303) 440-4894
+ */
+
+#ifndef SUN3_SCSI_H
+#define SUN3_SCSI_H
+
+/* additional registers - mainly DMA control regs */
+/* these start at regbase + 8 -- directly after the NCR regs */
+struct sun3_dma_regs {
+	unsigned short dma_addr_hi; /* vme only */
+	unsigned short dma_addr_lo; /* vme only */
+	unsigned short dma_count_hi; /* vme only */
+	unsigned short dma_count_lo; /* vme only */
+	unsigned short udc_data; /* udc dma data reg (obio only) */
+	unsigned short udc_addr; /* uda dma addr reg (obio only) */
+	unsigned short fifo_data; /* fifo data reg, holds extra byte on
+				     odd dma reads */
+	unsigned short fifo_count; 
+	unsigned short csr; /* control/status reg */
+	unsigned short bpack_hi; /* vme only */
+	unsigned short bpack_lo; /* vme only */
+	unsigned short ivect; /* vme only */
+	unsigned short fifo_count_hi; /* vme only */
+};
+
+/* ucd chip specific regs - live in dvma space */
+struct sun3_udc_regs {
+     unsigned short rsel; /* select regs to load */
+     unsigned short addr_hi; /* high word of addr */
+     unsigned short addr_lo; /* low word */
+     unsigned short count; /* words to be xfer'd */
+     unsigned short mode_hi; /* high word of channel mode */
+     unsigned short mode_lo; /* low word of channel mode */
+};
+
+/* addresses of the udc registers */
+#define UDC_MODE 0x38 
+#define UDC_CSR 0x2e /* command/status */
+#define UDC_CHN_HI 0x26 /* chain high word */
+#define UDC_CHN_LO 0x22 /* chain lo word */
+#define UDC_CURA_HI 0x1a /* cur reg A high */
+#define UDC_CURA_LO 0x0a /* cur reg A low */
+#define UDC_CURB_HI 0x12 /* cur reg B high */
+#define UDC_CURB_LO 0x02 /* cur reg B low */
+#define UDC_MODE_HI 0x56 /* mode reg high */
+#define UDC_MODE_LO 0x52 /* mode reg low */
+#define UDC_COUNT 0x32 /* words to xfer */
+
+/* some udc commands */
+#define UDC_RESET 0
+#define UDC_CHN_START 0xa0 /* start chain */
+#define UDC_INT_ENABLE 0x32 /* channel 1 int on */
+
+/* udc mode words */
+#define UDC_MODE_HIWORD 0x40
+#define UDC_MODE_LSEND 0xc2
+#define UDC_MODE_LRECV 0xd2
+
+/* udc reg selections */
+#define UDC_RSEL_SEND 0x282
+#define UDC_RSEL_RECV 0x182
+
+/* bits in csr reg */
+#define CSR_DMA_ACTIVE 0x8000
+#define CSR_DMA_CONFLICT 0x4000
+#define CSR_DMA_BUSERR 0x2000
+
+#define CSR_FIFO_EMPTY 0x400 /* fifo flushed? */
+#define CSR_SDB_INT 0x200 /* sbc interrupt pending */
+#define CSR_DMA_INT 0x100 /* dma interrupt pending */
+
+#define CSR_LEFT 0xc0
+#define CSR_LEFT_3 0xc0
+#define CSR_LEFT_2 0x80
+#define CSR_LEFT_1 0x40
+#define CSR_PACK_ENABLE 0x20
+
+#define CSR_DMA_ENABLE 0x10
+
+#define CSR_SEND 0x8 /* 1 = send  0 = recv */
+#define CSR_FIFO 0x2 /* reset fifo */
+#define CSR_INTR 0x4 /* interrupt enable */
+#define CSR_SCSI 0x1 
+
+#define VME_DATA24 0x3d00
+
+#endif /* SUN3_SCSI_H */
+