Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

1 files changed, 1072 insertions, 0 deletions

diff --git a/kernel/drivers/scsi/aha1542.c b/kernel/drivers/scsi/aha1542.c
new file mode 100644
index 000000000..b95d2779f
--- /dev/null
+++ b/kernel/drivers/scsi/aha1542.c
@@ -0,0 +1,1072 @@
+/*
+ *  Driver for Adaptec AHA-1542 SCSI host adapters
+ *
+ *  Copyright (C) 1992  Tommy Thorn
+ *  Copyright (C) 1993, 1994, 1995 Eric Youngdale
+ *  Copyright (C) 2015 Ondrej Zary
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/isa.h>
+#include <linux/pnp.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <asm/dma.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_host.h>
+#include "aha1542.h"
+
+#define MAXBOARDS 4
+
+static bool isapnp = 1;
+module_param(isapnp, bool, 0);
+MODULE_PARM_DESC(isapnp, "enable PnP support (default=1)");
+
+static int io[MAXBOARDS] = { 0x330, 0x334, 0, 0 };
+module_param_array(io, int, NULL, 0);
+MODULE_PARM_DESC(io, "base IO address of controller (0x130,0x134,0x230,0x234,0x330,0x334, default=0x330,0x334)");
+
+/* time AHA spends on the AT-bus during data transfer */
+static int bus_on[MAXBOARDS] = { -1, -1, -1, -1 }; /* power-on default: 11us */
+module_param_array(bus_on, int, NULL, 0);
+MODULE_PARM_DESC(bus_on, "bus on time [us] (2-15, default=-1 [HW default: 11])");
+
+/* time AHA spends off the bus (not to monopolize it) during data transfer  */
+static int bus_off[MAXBOARDS] = { -1, -1, -1, -1 }; /* power-on default: 4us */
+module_param_array(bus_off, int, NULL, 0);
+MODULE_PARM_DESC(bus_off, "bus off time [us] (1-64, default=-1 [HW default: 4])");
+
+/* default is jumper selected (J1 on 1542A), factory default = 5 MB/s */
+static int dma_speed[MAXBOARDS] = { -1, -1, -1, -1 };
+module_param_array(dma_speed, int, NULL, 0);
+MODULE_PARM_DESC(dma_speed, "DMA speed [MB/s] (5,6,7,8,10, default=-1 [by jumper])");
+
+#define BIOS_TRANSLATION_6432 1	/* Default case these days */
+#define BIOS_TRANSLATION_25563 2	/* Big disk case */
+
+struct aha1542_hostdata {
+	/* This will effectively start both of them at the first mailbox */
+	int bios_translation;	/* Mapping bios uses - for compatibility */
+	int aha1542_last_mbi_used;
+	int aha1542_last_mbo_used;
+	struct scsi_cmnd *int_cmds[AHA1542_MAILBOXES];
+	struct mailbox mb[2 * AHA1542_MAILBOXES];
+	struct ccb ccb[AHA1542_MAILBOXES];
+};
+
+static inline void aha1542_intr_reset(u16 base)
+{
+	outb(IRST, CONTROL(base));
+}
+
+static inline bool wait_mask(u16 port, u8 mask, u8 allof, u8 noneof, int timeout)
+{
+	bool delayed = true;
+
+	if (timeout == 0) {
+		timeout = 3000000;
+		delayed = false;
+	}
+
+	while (1) {
+		u8 bits = inb(port) & mask;
+		if ((bits & allof) == allof && ((bits & noneof) == 0))
+			break;
+		if (delayed)
+			mdelay(1);
+		if (--timeout == 0)
+			return false;
+	}
+
+	return true;
+}
+
+static int aha1542_outb(unsigned int base, u8 val)
+{
+	if (!wait_mask(STATUS(base), CDF, 0, CDF, 0))
+		return 1;
+	outb(val, DATA(base));
+
+	return 0;
+}
+
+static int aha1542_out(unsigned int base, u8 *buf, int len)
+{
+	while (len--) {
+		if (!wait_mask(STATUS(base), CDF, 0, CDF, 0))
+			return 1;
+		outb(*buf++, DATA(base));
+	}
+	if (!wait_mask(INTRFLAGS(base), INTRMASK, HACC, 0, 0))
+		return 1;
+
+	return 0;
+}
+
+/* Only used at boot time, so we do not need to worry about latency as much
+   here */
+
+static int aha1542_in(unsigned int base, u8 *buf, int len, int timeout)
+{
+	while (len--) {
+		if (!wait_mask(STATUS(base), DF, DF, 0, timeout))
+			return 1;
+		*buf++ = inb(DATA(base));
+	}
+	return 0;
+}
+
+static int makecode(unsigned hosterr, unsigned scsierr)
+{
+	switch (hosterr) {
+	case 0x0:
+	case 0xa:		/* Linked command complete without error and linked normally */
+	case 0xb:		/* Linked command complete without error, interrupt generated */
+		hosterr = 0;
+		break;
+
+	case 0x11:		/* Selection time out-The initiator selection or target
+				   reselection was not complete within the SCSI Time out period */
+		hosterr = DID_TIME_OUT;
+		break;
+
+	case 0x12:		/* Data overrun/underrun-The target attempted to transfer more data
+				   than was allocated by the Data Length field or the sum of the
+				   Scatter / Gather Data Length fields. */
+
+	case 0x13:		/* Unexpected bus free-The target dropped the SCSI BSY at an unexpected time. */
+
+	case 0x15:		/* MBO command was not 00, 01 or 02-The first byte of the CB was
+				   invalid. This usually indicates a software failure. */
+
+	case 0x16:		/* Invalid CCB Operation Code-The first byte of the CCB was invalid.
+				   This usually indicates a software failure. */
+
+	case 0x17:		/* Linked CCB does not have the same LUN-A subsequent CCB of a set
+				   of linked CCB's does not specify the same logical unit number as
+				   the first. */
+	case 0x18:		/* Invalid Target Direction received from Host-The direction of a
+				   Target Mode CCB was invalid. */
+
+	case 0x19:		/* Duplicate CCB Received in Target Mode-More than once CCB was
+				   received to service data transfer between the same target LUN
+				   and initiator SCSI ID in the same direction. */
+
+	case 0x1a:		/* Invalid CCB or Segment List Parameter-A segment list with a zero
+				   length segment or invalid segment list boundaries was received.
+				   A CCB parameter was invalid. */
+#ifdef DEBUG
+		printk("Aha1542: %x %x\n", hosterr, scsierr);
+#endif
+		hosterr = DID_ERROR;	/* Couldn't find any better */
+		break;
+
+	case 0x14:		/* Target bus phase sequence failure-An invalid bus phase or bus
+				   phase sequence was requested by the target. The host adapter
+				   will generate a SCSI Reset Condition, notifying the host with
+				   a SCRD interrupt */
+		hosterr = DID_RESET;
+		break;
+	default:
+		printk(KERN_ERR "aha1542: makecode: unknown hoststatus %x\n", hosterr);
+		break;
+	}
+	return scsierr | (hosterr << 16);
+}
+
+static int aha1542_test_port(struct Scsi_Host *sh)
+{
+	u8 inquiry_result[4];
+	int i;
+
+	/* Quick and dirty test for presence of the card. */
+	if (inb(STATUS(sh->io_port)) == 0xff)
+		return 0;
+
+	/* Reset the adapter. I ought to make a hard reset, but it's not really necessary */
+
+	/* In case some other card was probing here, reset interrupts */
+	aha1542_intr_reset(sh->io_port);	/* reset interrupts, so they don't block */
+
+	outb(SRST | IRST /*|SCRST */ , CONTROL(sh->io_port));
+
+	mdelay(20);		/* Wait a little bit for things to settle down. */
+
+	/* Expect INIT and IDLE, any of the others are bad */
+	if (!wait_mask(STATUS(sh->io_port), STATMASK, INIT | IDLE, STST | DIAGF | INVDCMD | DF | CDF, 0))
+		return 0;
+
+	/* Shouldn't have generated any interrupts during reset */
+	if (inb(INTRFLAGS(sh->io_port)) & INTRMASK)
+		return 0;
+
+	/* Perform a host adapter inquiry instead so we do not need to set
+	   up the mailboxes ahead of time */
+
+	aha1542_outb(sh->io_port, CMD_INQUIRY);
+
+	for (i = 0; i < 4; i++) {
+		if (!wait_mask(STATUS(sh->io_port), DF, DF, 0, 0))
+			return 0;
+		inquiry_result[i] = inb(DATA(sh->io_port));
+	}
+
+	/* Reading port should reset DF */
+	if (inb(STATUS(sh->io_port)) & DF)
+		return 0;
+
+	/* When HACC, command is completed, and we're though testing */
+	if (!wait_mask(INTRFLAGS(sh->io_port), HACC, HACC, 0, 0))
+		return 0;
+
+	/* Clear interrupts */
+	outb(IRST, CONTROL(sh->io_port));
+
+	return 1;
+}
+
+static irqreturn_t aha1542_interrupt(int irq, void *dev_id)
+{
+	struct Scsi_Host *sh = dev_id;
+	struct aha1542_hostdata *aha1542 = shost_priv(sh);
+	void (*my_done)(struct scsi_cmnd *) = NULL;
+	int errstatus, mbi, mbo, mbistatus;
+	int number_serviced;
+	unsigned long flags;
+	struct scsi_cmnd *tmp_cmd;
+	int flag;
+	struct mailbox *mb = aha1542->mb;
+	struct ccb *ccb = aha1542->ccb;
+
+#ifdef DEBUG
+	{
+		flag = inb(INTRFLAGS(sh->io_port));
+		shost_printk(KERN_DEBUG, sh, "aha1542_intr_handle: ");
+		if (!(flag & ANYINTR))
+			printk("no interrupt?");
+		if (flag & MBIF)
+			printk("MBIF ");
+		if (flag & MBOA)
+			printk("MBOF ");
+		if (flag & HACC)
+			printk("HACC ");
+		if (flag & SCRD)
+			printk("SCRD ");
+		printk("status %02x\n", inb(STATUS(sh->io_port)));
+	};
+#endif
+	number_serviced = 0;
+
+	spin_lock_irqsave(sh->host_lock, flags);
+	while (1) {
+		flag = inb(INTRFLAGS(sh->io_port));
+
+		/* Check for unusual interrupts.  If any of these happen, we should
+		   probably do something special, but for now just printing a message
+		   is sufficient.  A SCSI reset detected is something that we really
+		   need to deal with in some way. */
+		if (flag & ~MBIF) {
+			if (flag & MBOA)
+				printk("MBOF ");
+			if (flag & HACC)
+				printk("HACC ");
+			if (flag & SCRD)
+				printk("SCRD ");
+		}
+		aha1542_intr_reset(sh->io_port);
+
+		mbi = aha1542->aha1542_last_mbi_used + 1;
+		if (mbi >= 2 * AHA1542_MAILBOXES)
+			mbi = AHA1542_MAILBOXES;
+
+		do {
+			if (mb[mbi].status != 0)
+				break;
+			mbi++;
+			if (mbi >= 2 * AHA1542_MAILBOXES)
+				mbi = AHA1542_MAILBOXES;
+		} while (mbi != aha1542->aha1542_last_mbi_used);
+
+		if (mb[mbi].status == 0) {
+			spin_unlock_irqrestore(sh->host_lock, flags);
+			/* Hmm, no mail.  Must have read it the last time around */
+			if (!number_serviced)
+				shost_printk(KERN_WARNING, sh, "interrupt received, but no mail.\n");
+			return IRQ_HANDLED;
+		};
+
+		mbo = (scsi2int(mb[mbi].ccbptr) - (isa_virt_to_bus(&ccb[0]))) / sizeof(struct ccb);
+		mbistatus = mb[mbi].status;
+		mb[mbi].status = 0;
+		aha1542->aha1542_last_mbi_used = mbi;
+
+#ifdef DEBUG
+		if (ccb[mbo].tarstat | ccb[mbo].hastat)
+			shost_printk(KERN_DEBUG, sh, "aha1542_command: returning %x (status %d)\n",
+			       ccb[mbo].tarstat + ((int) ccb[mbo].hastat << 16), mb[mbi].status);
+#endif
+
+		if (mbistatus == 3)
+			continue;	/* Aborted command not found */
+
+#ifdef DEBUG
+		shost_printk(KERN_DEBUG, sh, "...done %d %d\n", mbo, mbi);
+#endif
+
+		tmp_cmd = aha1542->int_cmds[mbo];
+
+		if (!tmp_cmd || !tmp_cmd->scsi_done) {
+			spin_unlock_irqrestore(sh->host_lock, flags);
+			shost_printk(KERN_WARNING, sh, "Unexpected interrupt\n");
+			shost_printk(KERN_WARNING, sh, "tarstat=%x, hastat=%x idlun=%x ccb#=%d\n", ccb[mbo].tarstat,
+			       ccb[mbo].hastat, ccb[mbo].idlun, mbo);
+			return IRQ_HANDLED;
+		}
+		my_done = tmp_cmd->scsi_done;
+		kfree(tmp_cmd->host_scribble);
+		tmp_cmd->host_scribble = NULL;
+		/* Fetch the sense data, and tuck it away, in the required slot.  The
+		   Adaptec automatically fetches it, and there is no guarantee that
+		   we will still have it in the cdb when we come back */
+		if (ccb[mbo].tarstat == 2)
+			memcpy(tmp_cmd->sense_buffer, &ccb[mbo].cdb[ccb[mbo].cdblen],
+			       SCSI_SENSE_BUFFERSIZE);
+
+
+		/* is there mail :-) */
+
+		/* more error checking left out here */
+		if (mbistatus != 1)
+			/* This is surely wrong, but I don't know what's right */
+			errstatus = makecode(ccb[mbo].hastat, ccb[mbo].tarstat);
+		else
+			errstatus = 0;
+
+#ifdef DEBUG
+		if (errstatus)
+			shost_printk(KERN_DEBUG, sh, "(aha1542 error:%x %x %x) ", errstatus,
+			       ccb[mbo].hastat, ccb[mbo].tarstat);
+		if (ccb[mbo].tarstat == 2)
+			print_hex_dump_bytes("sense: ", DUMP_PREFIX_NONE, &ccb[mbo].cdb[ccb[mbo].cdblen], 12);
+		if (errstatus)
+			printk("aha1542_intr_handle: returning %6x\n", errstatus);
+#endif
+		tmp_cmd->result = errstatus;
+		aha1542->int_cmds[mbo] = NULL;	/* This effectively frees up the mailbox slot, as
+						   far as queuecommand is concerned */
+		my_done(tmp_cmd);
+		number_serviced++;
+	};
+}
+
+static int aha1542_queuecommand(struct Scsi_Host *sh, struct scsi_cmnd *cmd)
+{
+	struct aha1542_hostdata *aha1542 = shost_priv(sh);
+	u8 direction;
+	u8 target = cmd->device->id;
+	u8 lun = cmd->device->lun;
+	unsigned long flags;
+	int bufflen = scsi_bufflen(cmd);
+	int mbo, sg_count;
+	struct mailbox *mb = aha1542->mb;
+	struct ccb *ccb = aha1542->ccb;
+	struct chain *cptr;
+
+	if (*cmd->cmnd == REQUEST_SENSE) {
+		/* Don't do the command - we have the sense data already */
+		cmd->result = 0;
+		cmd->scsi_done(cmd);
+		return 0;
+	}
+#ifdef DEBUG
+	{
+		int i = -1;
+		if (*cmd->cmnd == READ_10 || *cmd->cmnd == WRITE_10)
+			i = xscsi2int(cmd->cmnd + 2);
+		else if (*cmd->cmnd == READ_6 || *cmd->cmnd == WRITE_6)
+			i = scsi2int(cmd->cmnd + 2);
+		shost_printk(KERN_DEBUG, sh, "aha1542_queuecommand: dev %d cmd %02x pos %d len %d",
+						target, *cmd->cmnd, i, bufflen);
+		print_hex_dump_bytes("command: ", DUMP_PREFIX_NONE, cmd->cmnd, cmd->cmd_len);
+	}
+#endif
+	if (bufflen) {	/* allocate memory before taking host_lock */
+		sg_count = scsi_sg_count(cmd);
+		cptr = kmalloc(sizeof(*cptr) * sg_count, GFP_KERNEL | GFP_DMA);
+		if (!cptr)
+			return SCSI_MLQUEUE_HOST_BUSY;
+	}
+
+	/* Use the outgoing mailboxes in a round-robin fashion, because this
+	   is how the host adapter will scan for them */
+
+	spin_lock_irqsave(sh->host_lock, flags);
+	mbo = aha1542->aha1542_last_mbo_used + 1;
+	if (mbo >= AHA1542_MAILBOXES)
+		mbo = 0;
+
+	do {
+		if (mb[mbo].status == 0 && aha1542->int_cmds[mbo] == NULL)
+			break;
+		mbo++;
+		if (mbo >= AHA1542_MAILBOXES)
+			mbo = 0;
+	} while (mbo != aha1542->aha1542_last_mbo_used);
+
+	if (mb[mbo].status || aha1542->int_cmds[mbo])
+		panic("Unable to find empty mailbox for aha1542.\n");
+
+	aha1542->int_cmds[mbo] = cmd;	/* This will effectively prevent someone else from
+					   screwing with this cdb. */
+
+	aha1542->aha1542_last_mbo_used = mbo;
+
+#ifdef DEBUG
+	shost_printk(KERN_DEBUG, sh, "Sending command (%d %p)...", mbo, cmd->scsi_done);
+#endif
+
+	any2scsi(mb[mbo].ccbptr, isa_virt_to_bus(&ccb[mbo]));	/* This gets trashed for some reason */
+
+	memset(&ccb[mbo], 0, sizeof(struct ccb));
+
+	ccb[mbo].cdblen = cmd->cmd_len;
+
+	direction = 0;
+	if (*cmd->cmnd == READ_10 || *cmd->cmnd == READ_6)
+		direction = 8;
+	else if (*cmd->cmnd == WRITE_10 || *cmd->cmnd == WRITE_6)
+		direction = 16;
+
+	memcpy(ccb[mbo].cdb, cmd->cmnd, ccb[mbo].cdblen);
+
+	if (bufflen) {
+		struct scatterlist *sg;
+		int i;
+
+		ccb[mbo].op = 2;	/* SCSI Initiator Command  w/scatter-gather */
+		cmd->host_scribble = (void *)cptr;
+		scsi_for_each_sg(cmd, sg, sg_count, i) {
+			any2scsi(cptr[i].dataptr, isa_page_to_bus(sg_page(sg))
+								+ sg->offset);
+			any2scsi(cptr[i].datalen, sg->length);
+		};
+		any2scsi(ccb[mbo].datalen, sg_count * sizeof(struct chain));
+		any2scsi(ccb[mbo].dataptr, isa_virt_to_bus(cptr));
+#ifdef DEBUG
+		shost_printk(KERN_DEBUG, sh, "cptr %p: ", cptr);
+		print_hex_dump_bytes("cptr: ", DUMP_PREFIX_NONE, cptr, 18);
+#endif
+	} else {
+		ccb[mbo].op = 0;	/* SCSI Initiator Command */
+		cmd->host_scribble = NULL;
+		any2scsi(ccb[mbo].datalen, 0);
+		any2scsi(ccb[mbo].dataptr, 0);
+	};
+	ccb[mbo].idlun = (target & 7) << 5 | direction | (lun & 7);	/*SCSI Target Id */
+	ccb[mbo].rsalen = 16;
+	ccb[mbo].linkptr[0] = ccb[mbo].linkptr[1] = ccb[mbo].linkptr[2] = 0;
+	ccb[mbo].commlinkid = 0;
+
+#ifdef DEBUG
+	print_hex_dump_bytes("sending: ", DUMP_PREFIX_NONE, &ccb[mbo], sizeof(ccb[mbo]) - 10);
+	printk("aha1542_queuecommand: now waiting for interrupt ");
+#endif
+	mb[mbo].status = 1;
+	aha1542_outb(cmd->device->host->io_port, CMD_START_SCSI);
+	spin_unlock_irqrestore(sh->host_lock, flags);
+
+	return 0;
+}
+
+/* Initialize mailboxes */
+static void setup_mailboxes(struct Scsi_Host *sh)
+{
+	struct aha1542_hostdata *aha1542 = shost_priv(sh);
+	int i;
+	struct mailbox *mb = aha1542->mb;
+	struct ccb *ccb = aha1542->ccb;
+
+	u8 mb_cmd[5] = { CMD_MBINIT, AHA1542_MAILBOXES, 0, 0, 0};
+
+	for (i = 0; i < AHA1542_MAILBOXES; i++) {
+		mb[i].status = mb[AHA1542_MAILBOXES + i].status = 0;
+		any2scsi(mb[i].ccbptr, isa_virt_to_bus(&ccb[i]));
+	};
+	aha1542_intr_reset(sh->io_port);	/* reset interrupts, so they don't block */
+	any2scsi((mb_cmd + 2), isa_virt_to_bus(mb));
+	if (aha1542_out(sh->io_port, mb_cmd, 5))
+		shost_printk(KERN_ERR, sh, "failed setting up mailboxes\n");
+	aha1542_intr_reset(sh->io_port);
+}
+
+static int aha1542_getconfig(struct Scsi_Host *sh)
+{
+	u8 inquiry_result[3];
+	int i;
+	i = inb(STATUS(sh->io_port));
+	if (i & DF) {
+		i = inb(DATA(sh->io_port));
+	};
+	aha1542_outb(sh->io_port, CMD_RETCONF);
+	aha1542_in(sh->io_port, inquiry_result, 3, 0);
+	if (!wait_mask(INTRFLAGS(sh->io_port), INTRMASK, HACC, 0, 0))
+		shost_printk(KERN_ERR, sh, "error querying board settings\n");
+	aha1542_intr_reset(sh->io_port);
+	switch (inquiry_result[0]) {
+	case 0x80:
+		sh->dma_channel = 7;
+		break;
+	case 0x40:
+		sh->dma_channel = 6;
+		break;
+	case 0x20:
+		sh->dma_channel = 5;
+		break;
+	case 0x01:
+		sh->dma_channel = 0;
+		break;
+	case 0:
+		/* This means that the adapter, although Adaptec 1542 compatible, doesn't use a DMA channel.
+		   Currently only aware of the BusLogic BT-445S VL-Bus adapter which needs this. */
+		sh->dma_channel = 0xFF;
+		break;
+	default:
+		shost_printk(KERN_ERR, sh, "Unable to determine DMA channel.\n");
+		return -1;
+	};
+	switch (inquiry_result[1]) {
+	case 0x40:
+		sh->irq = 15;
+		break;
+	case 0x20:
+		sh->irq = 14;
+		break;
+	case 0x8:
+		sh->irq = 12;
+		break;
+	case 0x4:
+		sh->irq = 11;
+		break;
+	case 0x2:
+		sh->irq = 10;
+		break;
+	case 0x1:
+		sh->irq = 9;
+		break;
+	default:
+		shost_printk(KERN_ERR, sh, "Unable to determine IRQ level.\n");
+		return -1;
+	};
+	sh->this_id = inquiry_result[2] & 7;
+	return 0;
+}
+
+/* This function should only be called for 1542C boards - we can detect
+   the special firmware settings and unlock the board */
+
+static int aha1542_mbenable(struct Scsi_Host *sh)
+{
+	static u8 mbenable_cmd[3];
+	static u8 mbenable_result[2];
+	int retval;
+
+	retval = BIOS_TRANSLATION_6432;
+
+	aha1542_outb(sh->io_port, CMD_EXTBIOS);
+	if (aha1542_in(sh->io_port, mbenable_result, 2, 100))
+		return retval;
+	if (!wait_mask(INTRFLAGS(sh->io_port), INTRMASK, HACC, 0, 100))
+		goto fail;
+	aha1542_intr_reset(sh->io_port);
+
+	if ((mbenable_result[0] & 0x08) || mbenable_result[1]) {
+		mbenable_cmd[0] = CMD_MBENABLE;
+		mbenable_cmd[1] = 0;
+		mbenable_cmd[2] = mbenable_result[1];
+
+		if ((mbenable_result[0] & 0x08) && (mbenable_result[1] & 0x03))
+			retval = BIOS_TRANSLATION_25563;
+
+		if (aha1542_out(sh->io_port, mbenable_cmd, 3))
+			goto fail;
+	};
+	while (0) {
+fail:
+		shost_printk(KERN_ERR, sh, "Mailbox init failed\n");
+	}
+	aha1542_intr_reset(sh->io_port);
+	return retval;
+}
+
+/* Query the board to find out if it is a 1542 or a 1740, or whatever. */
+static int aha1542_query(struct Scsi_Host *sh)
+{
+	struct aha1542_hostdata *aha1542 = shost_priv(sh);
+	u8 inquiry_result[4];
+	int i;
+	i = inb(STATUS(sh->io_port));
+	if (i & DF) {
+		i = inb(DATA(sh->io_port));
+	};
+	aha1542_outb(sh->io_port, CMD_INQUIRY);
+	aha1542_in(sh->io_port, inquiry_result, 4, 0);
+	if (!wait_mask(INTRFLAGS(sh->io_port), INTRMASK, HACC, 0, 0))
+		shost_printk(KERN_ERR, sh, "error querying card type\n");
+	aha1542_intr_reset(sh->io_port);
+
+	aha1542->bios_translation = BIOS_TRANSLATION_6432;	/* Default case */
+
+	/* For an AHA1740 series board, we ignore the board since there is a
+	   hardware bug which can lead to wrong blocks being returned if the board
+	   is operating in the 1542 emulation mode.  Since there is an extended mode
+	   driver, we simply ignore the board and let the 1740 driver pick it up.
+	 */
+
+	if (inquiry_result[0] == 0x43) {
+		shost_printk(KERN_INFO, sh, "Emulation mode not supported for AHA-1740 hardware, use aha1740 driver instead.\n");
+		return 1;
+	};
+
+	/* Always call this - boards that do not support extended bios translation
+	   will ignore the command, and we will set the proper default */
+
+	aha1542->bios_translation = aha1542_mbenable(sh);
+
+	return 0;
+}
+
+static u8 dma_speed_hw(int dma_speed)
+{
+	switch (dma_speed) {
+	case 5:
+		return 0x00;
+	case 6:
+		return 0x04;
+	case 7:
+		return 0x01;
+	case 8:
+		return 0x02;
+	case 10:
+		return 0x03;
+	}
+
+	return 0xff;	/* invalid */
+}
+
+/* Set the Bus on/off-times as not to ruin floppy performance */
+static void aha1542_set_bus_times(struct Scsi_Host *sh, int bus_on, int bus_off, int dma_speed)
+{
+	if (bus_on > 0) {
+		u8 oncmd[] = { CMD_BUSON_TIME, clamp(bus_on, 2, 15) };
+
+		aha1542_intr_reset(sh->io_port);
+		if (aha1542_out(sh->io_port, oncmd, 2))
+			goto fail;
+	}
+
+	if (bus_off > 0) {
+		u8 offcmd[] = { CMD_BUSOFF_TIME, clamp(bus_off, 1, 64) };
+
+		aha1542_intr_reset(sh->io_port);
+		if (aha1542_out(sh->io_port, offcmd, 2))
+			goto fail;
+	}
+
+	if (dma_speed_hw(dma_speed) != 0xff) {
+		u8 dmacmd[] = { CMD_DMASPEED, dma_speed_hw(dma_speed) };
+
+		aha1542_intr_reset(sh->io_port);
+		if (aha1542_out(sh->io_port, dmacmd, 2))
+			goto fail;
+	}
+	aha1542_intr_reset(sh->io_port);
+	return;
+fail:
+	shost_printk(KERN_ERR, sh, "setting bus on/off-time failed\n");
+	aha1542_intr_reset(sh->io_port);
+}
+
+/* return non-zero on detection */
+static struct Scsi_Host *aha1542_hw_init(struct scsi_host_template *tpnt, struct device *pdev, int indx)
+{
+	unsigned int base_io = io[indx];
+	struct Scsi_Host *sh;
+	struct aha1542_hostdata *aha1542;
+	char dma_info[] = "no DMA";
+
+	if (base_io == 0)
+		return NULL;
+
+	if (!request_region(base_io, AHA1542_REGION_SIZE, "aha1542"))
+		return NULL;
+
+	sh = scsi_host_alloc(tpnt, sizeof(struct aha1542_hostdata));
+	if (!sh)
+		goto release;
+	aha1542 = shost_priv(sh);
+
+	sh->unique_id = base_io;
+	sh->io_port = base_io;
+	sh->n_io_port = AHA1542_REGION_SIZE;
+	aha1542->aha1542_last_mbi_used = 2 * AHA1542_MAILBOXES - 1;
+	aha1542->aha1542_last_mbo_used = AHA1542_MAILBOXES - 1;
+
+	if (!aha1542_test_port(sh))
+		goto unregister;
+
+	aha1542_set_bus_times(sh, bus_on[indx], bus_off[indx], dma_speed[indx]);
+	if (aha1542_query(sh))
+		goto unregister;
+	if (aha1542_getconfig(sh) == -1)
+		goto unregister;
+
+	if (sh->dma_channel != 0xFF)
+		snprintf(dma_info, sizeof(dma_info), "DMA %d", sh->dma_channel);
+	shost_printk(KERN_INFO, sh, "Adaptec AHA-1542 (SCSI-ID %d) at IO 0x%x, IRQ %d, %s\n",
+				sh->this_id, base_io, sh->irq, dma_info);
+	if (aha1542->bios_translation == BIOS_TRANSLATION_25563)
+		shost_printk(KERN_INFO, sh, "Using extended bios translation\n");
+
+	setup_mailboxes(sh);
+
+	if (request_irq(sh->irq, aha1542_interrupt, 0, "aha1542", sh)) {
+		shost_printk(KERN_ERR, sh, "Unable to allocate IRQ.\n");
+		goto unregister;
+	}
+	if (sh->dma_channel != 0xFF) {
+		if (request_dma(sh->dma_channel, "aha1542")) {
+			shost_printk(KERN_ERR, sh, "Unable to allocate DMA channel.\n");
+			goto free_irq;
+		}
+		if (sh->dma_channel == 0 || sh->dma_channel >= 5) {
+			set_dma_mode(sh->dma_channel, DMA_MODE_CASCADE);
+			enable_dma(sh->dma_channel);
+		}
+	}
+
+	if (scsi_add_host(sh, pdev))
+		goto free_dma;
+
+	scsi_scan_host(sh);
+
+	return sh;
+free_dma:
+	if (sh->dma_channel != 0xff)
+		free_dma(sh->dma_channel);
+free_irq:
+	free_irq(sh->irq, sh);
+unregister:
+	scsi_host_put(sh);
+release:
+	release_region(base_io, AHA1542_REGION_SIZE);
+
+	return NULL;
+}
+
+static int aha1542_release(struct Scsi_Host *sh)
+{
+	scsi_remove_host(sh);
+	if (sh->dma_channel != 0xff)
+		free_dma(sh->dma_channel);
+	if (sh->irq)
+		free_irq(sh->irq, sh);
+	if (sh->io_port && sh->n_io_port)
+		release_region(sh->io_port, sh->n_io_port);
+	scsi_host_put(sh);
+	return 0;
+}
+
+
+/*
+ * This is a device reset.  This is handled by sending a special command
+ * to the device.
+ */
+static int aha1542_dev_reset(struct scsi_cmnd *cmd)
+{
+	struct Scsi_Host *sh = cmd->device->host;
+	struct aha1542_hostdata *aha1542 = shost_priv(sh);
+	unsigned long flags;
+	struct mailbox *mb = aha1542->mb;
+	u8 target = cmd->device->id;
+	u8 lun = cmd->device->lun;
+	int mbo;
+	struct ccb *ccb = aha1542->ccb;
+
+	spin_lock_irqsave(sh->host_lock, flags);
+	mbo = aha1542->aha1542_last_mbo_used + 1;
+	if (mbo >= AHA1542_MAILBOXES)
+		mbo = 0;
+
+	do {
+		if (mb[mbo].status == 0 && aha1542->int_cmds[mbo] == NULL)
+			break;
+		mbo++;
+		if (mbo >= AHA1542_MAILBOXES)
+			mbo = 0;
+	} while (mbo != aha1542->aha1542_last_mbo_used);
+
+	if (mb[mbo].status || aha1542->int_cmds[mbo])
+		panic("Unable to find empty mailbox for aha1542.\n");
+
+	aha1542->int_cmds[mbo] = cmd;	/* This will effectively
+					   prevent someone else from
+					   screwing with this cdb. */
+
+	aha1542->aha1542_last_mbo_used = mbo;
+
+	any2scsi(mb[mbo].ccbptr, isa_virt_to_bus(&ccb[mbo]));	/* This gets trashed for some reason */
+
+	memset(&ccb[mbo], 0, sizeof(struct ccb));
+
+	ccb[mbo].op = 0x81;	/* BUS DEVICE RESET */
+
+	ccb[mbo].idlun = (target & 7) << 5 | (lun & 7);		/*SCSI Target Id */
+
+	ccb[mbo].linkptr[0] = ccb[mbo].linkptr[1] = ccb[mbo].linkptr[2] = 0;
+	ccb[mbo].commlinkid = 0;
+
+	/* 
+	 * Now tell the 1542 to flush all pending commands for this 
+	 * target 
+	 */
+	aha1542_outb(sh->io_port, CMD_START_SCSI);
+	spin_unlock_irqrestore(sh->host_lock, flags);
+
+	scmd_printk(KERN_WARNING, cmd,
+		"Trying device reset for target\n");
+
+	return SUCCESS;
+}
+
+static int aha1542_reset(struct scsi_cmnd *cmd, u8 reset_cmd)
+{
+	struct Scsi_Host *sh = cmd->device->host;
+	struct aha1542_hostdata *aha1542 = shost_priv(sh);
+	unsigned long flags;
+	int i;
+
+	spin_lock_irqsave(sh->host_lock, flags);
+	/* 
+	 * This does a scsi reset for all devices on the bus.
+	 * In principle, we could also reset the 1542 - should
+	 * we do this?  Try this first, and we can add that later
+	 * if it turns out to be useful.
+	 */
+	outb(reset_cmd, CONTROL(cmd->device->host->io_port));
+
+	if (!wait_mask(STATUS(cmd->device->host->io_port),
+	     STATMASK, IDLE, STST | DIAGF | INVDCMD | DF | CDF, 0)) {
+		spin_unlock_irqrestore(sh->host_lock, flags);
+		return FAILED;
+	}
+
+	/*
+	 * We need to do this too before the 1542 can interact with
+	 * us again after host reset.
+	 */
+	if (reset_cmd & HRST)
+		setup_mailboxes(cmd->device->host);
+
+	/*
+	 * Now try to pick up the pieces.  For all pending commands,
+	 * free any internal data structures, and basically clear things
+	 * out.  We do not try and restart any commands or anything - 
+	 * the strategy handler takes care of that crap.
+	 */
+	shost_printk(KERN_WARNING, cmd->device->host, "Sent BUS RESET to scsi host %d\n", cmd->device->host->host_no);
+
+	for (i = 0; i < AHA1542_MAILBOXES; i++) {
+		if (aha1542->int_cmds[i] != NULL) {
+			struct scsi_cmnd *tmp_cmd;
+			tmp_cmd = aha1542->int_cmds[i];
+
+			if (tmp_cmd->device->soft_reset) {
+				/*
+				 * If this device implements the soft reset option,
+				 * then it is still holding onto the command, and
+				 * may yet complete it.  In this case, we don't
+				 * flush the data.
+				 */
+				continue;
+			}
+			kfree(tmp_cmd->host_scribble);
+			tmp_cmd->host_scribble = NULL;
+			aha1542->int_cmds[i] = NULL;
+			aha1542->mb[i].status = 0;
+		}
+	}
+
+	spin_unlock_irqrestore(sh->host_lock, flags);
+	return SUCCESS;
+}
+
+static int aha1542_bus_reset(struct scsi_cmnd *cmd)
+{
+	return aha1542_reset(cmd, SCRST);
+}
+
+static int aha1542_host_reset(struct scsi_cmnd *cmd)
+{
+	return aha1542_reset(cmd, HRST | SCRST);
+}
+
+static int aha1542_biosparam(struct scsi_device *sdev,
+		struct block_device *bdev, sector_t capacity, int geom[])
+{
+	struct aha1542_hostdata *aha1542 = shost_priv(sdev->host);
+
+	if (capacity >= 0x200000 &&
+			aha1542->bios_translation == BIOS_TRANSLATION_25563) {
+		/* Please verify that this is the same as what DOS returns */
+		geom[0] = 255;	/* heads */
+		geom[1] = 63;	/* sectors */
+	} else {
+		geom[0] = 64;	/* heads */
+		geom[1] = 32;	/* sectors */
+	}
+	geom[2] = sector_div(capacity, geom[0] * geom[1]);	/* cylinders */
+
+	return 0;
+}
+MODULE_LICENSE("GPL");
+
+static struct scsi_host_template driver_template = {
+	.module			= THIS_MODULE,
+	.proc_name		= "aha1542",
+	.name			= "Adaptec 1542",
+	.queuecommand		= aha1542_queuecommand,
+	.eh_device_reset_handler= aha1542_dev_reset,
+	.eh_bus_reset_handler	= aha1542_bus_reset,
+	.eh_host_reset_handler	= aha1542_host_reset,
+	.bios_param		= aha1542_biosparam,
+	.can_queue		= AHA1542_MAILBOXES, 
+	.this_id		= 7,
+	.sg_tablesize		= 16,
+	.cmd_per_lun		= 1,
+	.unchecked_isa_dma	= 1, 
+	.use_clustering		= ENABLE_CLUSTERING,
+};
+
+static int aha1542_isa_match(struct device *pdev, unsigned int ndev)
+{
+	struct Scsi_Host *sh = aha1542_hw_init(&driver_template, pdev, ndev);
+
+	if (!sh)
+		return 0;
+
+	dev_set_drvdata(pdev, sh);
+	return 1;
+}
+
+static int aha1542_isa_remove(struct device *pdev,
+				    unsigned int ndev)
+{
+	aha1542_release(dev_get_drvdata(pdev));
+	dev_set_drvdata(pdev, NULL);
+	return 0;
+}
+
+static struct isa_driver aha1542_isa_driver = {
+	.match		= aha1542_isa_match,
+	.remove		= aha1542_isa_remove,
+	.driver		= {
+		.name	= "aha1542"
+	},
+};
+static int isa_registered;
+
+#ifdef CONFIG_PNP
+static struct pnp_device_id aha1542_pnp_ids[] = {
+	{ .id = "ADP1542" },
+	{ .id = "" }
+};
+MODULE_DEVICE_TABLE(pnp, aha1542_pnp_ids);
+
+static int aha1542_pnp_probe(struct pnp_dev *pdev, const struct pnp_device_id *id)
+{
+	int indx;
+	struct Scsi_Host *sh;
+
+	for (indx = 0; indx < ARRAY_SIZE(io); indx++) {
+		if (io[indx])
+			continue;
+
+		if (pnp_activate_dev(pdev) < 0)
+			continue;
+
+		io[indx] = pnp_port_start(pdev, 0);
+
+		/* The card can be queried for its DMA, we have
+		   the DMA set up that is enough */
+
+		dev_info(&pdev->dev, "ISAPnP found an AHA1535 at I/O 0x%03X", io[indx]);
+	}
+
+	sh = aha1542_hw_init(&driver_template, &pdev->dev, indx);
+	if (!sh)
+		return -ENODEV;
+
+	pnp_set_drvdata(pdev, sh);
+	return 0;
+}
+
+static void aha1542_pnp_remove(struct pnp_dev *pdev)
+{
+	aha1542_release(pnp_get_drvdata(pdev));
+	pnp_set_drvdata(pdev, NULL);
+}
+
+static struct pnp_driver aha1542_pnp_driver = {
+	.name		= "aha1542",
+	.id_table	= aha1542_pnp_ids,
+	.probe		= aha1542_pnp_probe,
+	.remove		= aha1542_pnp_remove,
+};
+static int pnp_registered;
+#endif /* CONFIG_PNP */
+
+static int __init aha1542_init(void)
+{
+	int ret = 0;
+
+#ifdef CONFIG_PNP
+	if (isapnp) {
+		ret = pnp_register_driver(&aha1542_pnp_driver);
+		if (!ret)
+			pnp_registered = 1;
+	}
+#endif
+	ret = isa_register_driver(&aha1542_isa_driver, MAXBOARDS);
+	if (!ret)
+		isa_registered = 1;
+
+#ifdef CONFIG_PNP
+	if (pnp_registered)
+		ret = 0;
+#endif
+	if (isa_registered)
+		ret = 0;
+
+	return ret;
+}
+
+static void __exit aha1542_exit(void)
+{
+#ifdef CONFIG_PNP
+	if (pnp_registered)
+		pnp_unregister_driver(&aha1542_pnp_driver);
+#endif
+	if (isa_registered)
+		isa_unregister_driver(&aha1542_isa_driver);
+}
+
+module_init(aha1542_init);
+module_exit(aha1542_exit);