These changes are the raw update to linux-4.4.6-rt14. Kernel sources

are taken from kernel.org, and rt patch from the rt wiki download page.

During the rebasing, the following patch collided:

Force tick interrupt and get rid of softirq magic(I70131fb85).

Collisions have been removed because its logic was found on the
source already.

Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>

56 files changed, 5222 insertions, 1245 deletions

diff --git a/kernel/drivers/regulator/88pm800.c b/kernel/drivers/regulator/88pm800.c
index 832932bdc..a62a89674 100644
--- a/kernel/drivers/regulator/88pm800.c
+++ b/kernel/drivers/regulator/88pm800.c
@@ -78,7 +78,6 @@ struct pm800_regulator_info {
 };
 
 struct pm800_regulators {
-	struct regulator_dev *regulators[PM800_ID_RG_MAX];
 	struct pm80x_chip *chip;
 	struct regmap *map;
 };
@@ -92,14 +91,16 @@ struct pm800_regulators {
  * not the constant voltage table.
  * n_volt - Number of available selectors
  */
-#define PM800_BUCK(vreg, ereg, ebit, amax, volt_ranges, n_volt)		\
+#define PM800_BUCK(match, vreg, ereg, ebit, amax, volt_ranges, n_volt)	\
 {									\
 	.desc	= {							\
-		.name	= #vreg,					\
-		.ops	= &pm800_volt_range_ops,			\
-		.type	= REGULATOR_VOLTAGE,				\
-		.id	= PM800_ID_##vreg,				\
-		.owner	= THIS_MODULE,					\
+		.name			= #vreg,			\
+		.of_match		= of_match_ptr(#match),		\
+		.regulators_node	= of_match_ptr("regulators"),	\
+		.ops			= &pm800_volt_range_ops,	\
+		.type			= REGULATOR_VOLTAGE,		\
+		.id			= PM800_ID_##vreg,		\
+		.owner			= THIS_MODULE,			\
 		.n_voltages		= n_volt,			\
 		.linear_ranges		= volt_ranges,			\
 		.n_linear_ranges	= ARRAY_SIZE(volt_ranges),	\
@@ -108,7 +109,7 @@ struct pm800_regulators {
 		.enable_reg		= PM800_##ereg,			\
 		.enable_mask		= 1 << (ebit),			\
 	},								\
-	.max_ua		= (amax),					\
+	.max_ua	= (amax),						\
 }
 
 /*
@@ -120,22 +121,24 @@ struct pm800_regulators {
  * For all the LDOes, there are too many ranges. Using volt_table will be
  * simpler and faster.
  */
-#define PM800_LDO(vreg, ereg, ebit, amax, ldo_volt_table)		\
+#define PM800_LDO(match, vreg, ereg, ebit, amax, ldo_volt_table)	\
 {									\
 	.desc	= {							\
-		.name	= #vreg,					\
-		.ops	= &pm800_volt_table_ops,			\
-		.type	= REGULATOR_VOLTAGE,				\
-		.id	= PM800_ID_##vreg,				\
-		.owner	= THIS_MODULE,					\
-		.n_voltages = ARRAY_SIZE(ldo_volt_table),		\
-		.vsel_reg	= PM800_##vreg##_VOUT,			\
-		.vsel_mask	= 0x1f,					\
-		.enable_reg	= PM800_##ereg,				\
-		.enable_mask	= 1 << (ebit),				\
-		.volt_table	= ldo_volt_table,			\
+		.name			= #vreg,			\
+		.of_match		= of_match_ptr(#match),		\
+		.regulators_node	= of_match_ptr("regulators"),	\
+		.ops			= &pm800_volt_table_ops,	\
+		.type			= REGULATOR_VOLTAGE,		\
+		.id			= PM800_ID_##vreg,		\
+		.owner			= THIS_MODULE,			\
+		.n_voltages		= ARRAY_SIZE(ldo_volt_table),	\
+		.vsel_reg		= PM800_##vreg##_VOUT,		\
+		.vsel_mask		= 0xf,				\
+		.enable_reg		= PM800_##ereg,			\
+		.enable_mask		= 1 << (ebit),			\
+		.volt_table		= ldo_volt_table,		\
 	},								\
-	.max_ua		= (amax),					\
+	.max_ua	= (amax),						\
 }
 
 /* Ranges are sorted in ascending order. */
@@ -178,122 +181,66 @@ static int pm800_get_current_limit(struct regulator_dev *rdev)
 }
 
 static struct regulator_ops pm800_volt_range_ops = {
-	.list_voltage = regulator_list_voltage_linear_range,
-	.map_voltage = regulator_map_voltage_linear_range,
-	.set_voltage_sel = regulator_set_voltage_sel_regmap,
-	.get_voltage_sel = regulator_get_voltage_sel_regmap,
-	.enable = regulator_enable_regmap,
-	.disable = regulator_disable_regmap,
-	.is_enabled = regulator_is_enabled_regmap,
-	.get_current_limit = pm800_get_current_limit,
+	.list_voltage		= regulator_list_voltage_linear_range,
+	.map_voltage		= regulator_map_voltage_linear_range,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.is_enabled		= regulator_is_enabled_regmap,
+	.get_current_limit	= pm800_get_current_limit,
 };
 
 static struct regulator_ops pm800_volt_table_ops = {
-	.list_voltage = regulator_list_voltage_table,
-	.map_voltage = regulator_map_voltage_iterate,
-	.set_voltage_sel = regulator_set_voltage_sel_regmap,
-	.get_voltage_sel = regulator_get_voltage_sel_regmap,
-	.enable = regulator_enable_regmap,
-	.disable = regulator_disable_regmap,
-	.is_enabled = regulator_is_enabled_regmap,
-	.get_current_limit = pm800_get_current_limit,
+	.list_voltage		= regulator_list_voltage_table,
+	.map_voltage		= regulator_map_voltage_iterate,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.is_enabled		= regulator_is_enabled_regmap,
+	.get_current_limit	= pm800_get_current_limit,
 };
 
 /* The array is indexed by id(PM800_ID_XXX) */
 static struct pm800_regulator_info pm800_regulator_info[] = {
-	PM800_BUCK(BUCK1, BUCK_ENA, 0, 3000000, buck1_volt_range, 0x55),
-	PM800_BUCK(BUCK2, BUCK_ENA, 1, 1200000, buck2_5_volt_range, 0x73),
-	PM800_BUCK(BUCK3, BUCK_ENA, 2, 1200000, buck2_5_volt_range, 0x73),
-	PM800_BUCK(BUCK4, BUCK_ENA, 3, 1200000, buck2_5_volt_range, 0x73),
-	PM800_BUCK(BUCK5, BUCK_ENA, 4, 1200000, buck2_5_volt_range, 0x73),
-
-	PM800_LDO(LDO1, LDO_ENA1_1, 0, 200000, ldo1_volt_table),
-	PM800_LDO(LDO2, LDO_ENA1_1, 1, 10000, ldo2_volt_table),
-	PM800_LDO(LDO3, LDO_ENA1_1, 2, 300000, ldo3_17_volt_table),
-	PM800_LDO(LDO4, LDO_ENA1_1, 3, 300000, ldo3_17_volt_table),
-	PM800_LDO(LDO5, LDO_ENA1_1, 4, 300000, ldo3_17_volt_table),
-	PM800_LDO(LDO6, LDO_ENA1_1, 5, 300000, ldo3_17_volt_table),
-	PM800_LDO(LDO7, LDO_ENA1_1, 6, 300000, ldo3_17_volt_table),
-	PM800_LDO(LDO8, LDO_ENA1_1, 7, 300000, ldo3_17_volt_table),
-	PM800_LDO(LDO9, LDO_ENA1_2, 0, 300000, ldo3_17_volt_table),
-	PM800_LDO(LDO10, LDO_ENA1_2, 1, 300000, ldo3_17_volt_table),
-	PM800_LDO(LDO11, LDO_ENA1_2, 2, 300000, ldo3_17_volt_table),
-	PM800_LDO(LDO12, LDO_ENA1_2, 3, 300000, ldo3_17_volt_table),
-	PM800_LDO(LDO13, LDO_ENA1_2, 4, 300000, ldo3_17_volt_table),
-	PM800_LDO(LDO14, LDO_ENA1_2, 5, 300000, ldo3_17_volt_table),
-	PM800_LDO(LDO15, LDO_ENA1_2, 6, 300000, ldo3_17_volt_table),
-	PM800_LDO(LDO16, LDO_ENA1_2, 7, 300000, ldo3_17_volt_table),
-	PM800_LDO(LDO17, LDO_ENA1_3, 0, 300000, ldo3_17_volt_table),
-	PM800_LDO(LDO18, LDO_ENA1_3, 1, 200000, ldo18_19_volt_table),
-	PM800_LDO(LDO19, LDO_ENA1_3, 2, 200000, ldo18_19_volt_table),
-};
-
-#define PM800_REGULATOR_OF_MATCH(_name, _id)				\
-	[PM800_ID_##_id] = {						\
-		.name = #_name,						\
-		.driver_data = &pm800_regulator_info[PM800_ID_##_id],	\
-	}
-
-static struct of_regulator_match pm800_regulator_matches[] = {
-	PM800_REGULATOR_OF_MATCH(buck1, BUCK1),
-	PM800_REGULATOR_OF_MATCH(buck2, BUCK2),
-	PM800_REGULATOR_OF_MATCH(buck3, BUCK3),
-	PM800_REGULATOR_OF_MATCH(buck4, BUCK4),
-	PM800_REGULATOR_OF_MATCH(buck5, BUCK5),
-	PM800_REGULATOR_OF_MATCH(ldo1, LDO1),
-	PM800_REGULATOR_OF_MATCH(ldo2, LDO2),
-	PM800_REGULATOR_OF_MATCH(ldo3, LDO3),
-	PM800_REGULATOR_OF_MATCH(ldo4, LDO4),
-	PM800_REGULATOR_OF_MATCH(ldo5, LDO5),
-	PM800_REGULATOR_OF_MATCH(ldo6, LDO6),
-	PM800_REGULATOR_OF_MATCH(ldo7, LDO7),
-	PM800_REGULATOR_OF_MATCH(ldo8, LDO8),
-	PM800_REGULATOR_OF_MATCH(ldo9, LDO9),
-	PM800_REGULATOR_OF_MATCH(ldo10, LDO10),
-	PM800_REGULATOR_OF_MATCH(ldo11, LDO11),
-	PM800_REGULATOR_OF_MATCH(ldo12, LDO12),
-	PM800_REGULATOR_OF_MATCH(ldo13, LDO13),
-	PM800_REGULATOR_OF_MATCH(ldo14, LDO14),
-	PM800_REGULATOR_OF_MATCH(ldo15, LDO15),
-	PM800_REGULATOR_OF_MATCH(ldo16, LDO16),
-	PM800_REGULATOR_OF_MATCH(ldo17, LDO17),
-	PM800_REGULATOR_OF_MATCH(ldo18, LDO18),
-	PM800_REGULATOR_OF_MATCH(ldo19, LDO19),
+	PM800_BUCK(buck1, BUCK1, BUCK_ENA, 0, 3000000, buck1_volt_range, 0x55),
+	PM800_BUCK(buck2, BUCK2, BUCK_ENA, 1, 1200000, buck2_5_volt_range, 0x73),
+	PM800_BUCK(buck3, BUCK3, BUCK_ENA, 2, 1200000, buck2_5_volt_range, 0x73),
+	PM800_BUCK(buck4, BUCK4, BUCK_ENA, 3, 1200000, buck2_5_volt_range, 0x73),
+	PM800_BUCK(buck5, BUCK5, BUCK_ENA, 4, 1200000, buck2_5_volt_range, 0x73),
+
+	PM800_LDO(ldo1, LDO1, LDO_ENA1_1, 0, 200000, ldo1_volt_table),
+	PM800_LDO(ldo2, LDO2, LDO_ENA1_1, 1, 10000, ldo2_volt_table),
+	PM800_LDO(ldo3, LDO3, LDO_ENA1_1, 2, 300000, ldo3_17_volt_table),
+	PM800_LDO(ldo4, LDO4, LDO_ENA1_1, 3, 300000, ldo3_17_volt_table),
+	PM800_LDO(ldo5, LDO5, LDO_ENA1_1, 4, 300000, ldo3_17_volt_table),
+	PM800_LDO(ldo6, LDO6, LDO_ENA1_1, 5, 300000, ldo3_17_volt_table),
+	PM800_LDO(ldo7, LDO7, LDO_ENA1_1, 6, 300000, ldo3_17_volt_table),
+	PM800_LDO(ldo8, LDO8, LDO_ENA1_1, 7, 300000, ldo3_17_volt_table),
+	PM800_LDO(ldo9, LDO9, LDO_ENA1_2, 0, 300000, ldo3_17_volt_table),
+	PM800_LDO(ldo10, LDO10, LDO_ENA1_2, 1, 300000, ldo3_17_volt_table),
+	PM800_LDO(ldo11, LDO11, LDO_ENA1_2, 2, 300000, ldo3_17_volt_table),
+	PM800_LDO(ldo12, LDO12, LDO_ENA1_2, 3, 300000, ldo3_17_volt_table),
+	PM800_LDO(ldo13, LDO13, LDO_ENA1_2, 4, 300000, ldo3_17_volt_table),
+	PM800_LDO(ldo14, LDO14, LDO_ENA1_2, 5, 300000, ldo3_17_volt_table),
+	PM800_LDO(ldo15, LDO15, LDO_ENA1_2, 6, 300000, ldo3_17_volt_table),
+	PM800_LDO(ldo16, LDO16, LDO_ENA1_2, 7, 300000, ldo3_17_volt_table),
+	PM800_LDO(ldo17, LDO17, LDO_ENA1_3, 0, 300000, ldo3_17_volt_table),
+	PM800_LDO(ldo18, LDO18, LDO_ENA1_3, 1, 200000, ldo18_19_volt_table),
+	PM800_LDO(ldo19, LDO19, LDO_ENA1_3, 2, 200000, ldo18_19_volt_table),
 };
 
-static int pm800_regulator_dt_init(struct platform_device *pdev)
-{
-	struct device_node *np = pdev->dev.of_node;
-	int ret;
-
-	ret = of_regulator_match(&pdev->dev, np,
-				 pm800_regulator_matches,
-				 ARRAY_SIZE(pm800_regulator_matches));
-	if (ret < 0)
-		return ret;
-
-	return 0;
-}
-
 static int pm800_regulator_probe(struct platform_device *pdev)
 {
 	struct pm80x_chip *chip = dev_get_drvdata(pdev->dev.parent);
 	struct pm80x_platform_data *pdata = dev_get_platdata(pdev->dev.parent);
 	struct pm800_regulators *pm800_data;
-	struct pm800_regulator_info *info;
 	struct regulator_config config = { };
 	struct regulator_init_data *init_data;
 	int i, ret;
 
-	if (!pdata || pdata->num_regulators == 0) {
-		if (IS_ENABLED(CONFIG_OF)) {
-			ret = pm800_regulator_dt_init(pdev);
-			if (ret)
-				return ret;
-		} else {
-			return -ENODEV;
-		}
-	} else if (pdata->num_regulators) {
+	if (pdata && pdata->num_regulators) {
 		unsigned int count = 0;
 
 		/* Check whether num_regulator is valid. */
@@ -303,8 +250,6 @@ static int pm800_regulator_probe(struct platform_device *pdev)
 		}
 		if (count != pdata->num_regulators)
 			return -EINVAL;
-	} else {
-		return -EINVAL;
 	}
 
 	pm800_data = devm_kzalloc(&pdev->dev, sizeof(*pm800_data),
@@ -317,30 +262,27 @@ static int pm800_regulator_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, pm800_data);
 
+	config.dev = chip->dev;
+	config.regmap = pm800_data->map;
 	for (i = 0; i < PM800_ID_RG_MAX; i++) {
-		if (!pdata || pdata->num_regulators == 0)
-			init_data = pm800_regulator_matches[i].init_data;
-		else
+		struct regulator_dev *regulator;
+
+		if (pdata && pdata->num_regulators) {
 			init_data = pdata->regulators[i];
-		if (!init_data)
-			continue;
-		info = pm800_regulator_matches[i].driver_data;
-		config.dev = &pdev->dev;
-		config.init_data = init_data;
-		config.driver_data = info;
-		config.regmap = pm800_data->map;
-		config.of_node = pm800_regulator_matches[i].of_node;
-
-		pm800_data->regulators[i] =
-				regulator_register(&info->desc, &config);
-		if (IS_ERR(pm800_data->regulators[i])) {
-			ret = PTR_ERR(pm800_data->regulators[i]);
-			dev_err(&pdev->dev, "Failed to register %s\n",
-				info->desc.name);
+			if (!init_data)
+				continue;
 
-			while (--i >= 0)
-				regulator_unregister(pm800_data->regulators[i]);
+			config.init_data = init_data;
+		}
+
+		config.driver_data = &pm800_regulator_info[i];
 
+		regulator = devm_regulator_register(&pdev->dev,
+				&pm800_regulator_info[i].desc, &config);
+		if (IS_ERR(regulator)) {
+			ret = PTR_ERR(regulator);
+			dev_err(&pdev->dev, "Failed to register %s\n",
+					pm800_regulator_info[i].desc.name);
 			return ret;
 		}
 	}
@@ -348,23 +290,11 @@ static int pm800_regulator_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int pm800_regulator_remove(struct platform_device *pdev)
-{
-	struct pm800_regulators *pm800_data = platform_get_drvdata(pdev);
-	int i;
-
-	for (i = 0; i < PM800_ID_RG_MAX; i++)
-		regulator_unregister(pm800_data->regulators[i]);
-
-	return 0;
-}
-
 static struct platform_driver pm800_regulator_driver = {
 	.driver		= {
 		.name	= "88pm80x-regulator",
 	},
 	.probe		= pm800_regulator_probe,
-	.remove		= pm800_regulator_remove,
 };
 
 module_platform_driver(pm800_regulator_driver);
diff --git a/kernel/drivers/regulator/88pm8607.c b/kernel/drivers/regulator/88pm8607.c
index c3d15427a..b100a63ff 100644
--- a/kernel/drivers/regulator/88pm8607.c
+++ b/kernel/drivers/regulator/88pm8607.c
@@ -404,7 +404,7 @@ static int pm8607_regulator_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static struct platform_device_id pm8607_regulator_driver_ids[] = {
+static const struct platform_device_id pm8607_regulator_driver_ids[] = {
 	{
 		.name	= "88pm860x-regulator",
 		.driver_data	= 0,
diff --git a/kernel/drivers/regulator/Kconfig b/kernel/drivers/regulator/Kconfig
index a6f116aa5..006762080 100644
--- a/kernel/drivers/regulator/Kconfig
+++ b/kernel/drivers/regulator/Kconfig
@@ -178,6 +178,16 @@ config REGULATOR_DA9055
 	  This driver can also be built as a module. If so, the module
 	  will be called da9055-regulator.
 
+config REGULATOR_DA9062
+	tristate "Dialog Semiconductor DA9062 regulators"
+	depends on MFD_DA9062
+	help
+	  Say y here to support the BUCKs and LDOs regulators found on
+	  DA9062 PMICs.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called da9062-regulator.
+
 config REGULATOR_DA9063
 	tristate "Dialog Semiconductor DA9063 regulators"
 	depends on MFD_DA9063
@@ -199,13 +209,13 @@ config REGULATOR_DA9210
 	  interface.
 
 config REGULATOR_DA9211
-	tristate "Dialog Semiconductor DA9211/DA9212/DA9213/DA9214 regulator"
+	tristate "Dialog Semiconductor DA9211/DA9212/DA9213/DA9214/DA9215 regulator"
 	depends on I2C
 	select REGMAP_I2C
 	help
 	  Say y here to support for the Dialog Semiconductor DA9211/DA9212
-	  /DA9213/DA9214.
-	  The DA9211/DA9212/DA9213/DA9214 is a multi-phase synchronous
+	  /DA9213/DA9214/DA9215.
+	  The DA9211/DA9212/DA9213/DA9214/DA9215 is a multi-phase synchronous
 	  step down converter 12A or 16A DC-DC Buck controlled through an I2C
 	  interface.
 
@@ -233,7 +243,7 @@ config REGULATOR_FAN53555
 
 config REGULATOR_GPIO
 	tristate "GPIO regulator support"
-	depends on GPIOLIB
+	depends on GPIOLIB || COMPILE_TEST
 	help
 	  This driver provides support for regulators that can be
 	  controlled via gpios.
@@ -397,13 +407,13 @@ config REGULATOR_MAX77686
 	  Exynos-4 chips to control VARM and VINT voltages.
 
 config REGULATOR_MAX77693
-	tristate "Maxim MAX77693 regulator"
-	depends on MFD_MAX77693
+	tristate "Maxim 77693/77843 regulator"
+	depends on (MFD_MAX77693 || MFD_MAX77843)
 	help
-	  This driver controls a Maxim 77693 regulator via I2C bus.
+	  This driver controls a Maxim 77693/77843 regulators via I2C bus.
 	  The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2'
 	  and one current regulator 'CHARGER'. This is suitable for
-	  Exynos-4x12 chips.
+	  Exynos-4x12 (MAX77693) or Exynos5433 (MAX77843) SoC chips.
 
 config REGULATOR_MAX77802
 	tristate "Maxim 77802 regulator"
@@ -414,14 +424,6 @@ config REGULATOR_MAX77802
 	  Exynos5420/Exynos5800 SoCs to control various voltages.
 	  It includes support for control of voltage and ramp speed.
 
-config REGULATOR_MAX77843
-	tristate "Maxim 77843 regulator"
-	depends on MFD_MAX77843
-	help
-	  This driver controls a Maxim 77843 regulator.
-	  The regulator include two 'SAFEOUT' for USB(Universal Serial Bus)
-	  This is suitable for Exynos5433 SoC chips.
-
 config REGULATOR_MC13XXX_CORE
 	tristate
 
@@ -441,6 +443,16 @@ config REGULATOR_MC13892
 	  Say y here to support the regulators found on the Freescale MC13892
 	  PMIC.
 
+config REGULATOR_MT6311
+	tristate "MediaTek MT6311 PMIC"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  Say y here to select this option to enable the power regulator of
+	  MediaTek MT6311 PMIC.
+	  This driver supports the control of different power rails of device
+	  through regulator interface.
+
 config REGULATOR_MT6397
 	tristate "MediaTek MT6397 PMIC"
 	depends on MFD_MT6397
@@ -512,6 +524,29 @@ config REGULATOR_QCOM_RPM
 	  Qualcomm RPM as a module. The module will be named
 	  "qcom_rpm-regulator".
 
+config REGULATOR_QCOM_SMD_RPM
+	tristate "Qualcomm SMD based RPM regulator driver"
+	depends on QCOM_SMD_RPM
+	help
+	  If you say yes to this option, support will be included for the
+	  regulators exposed by the Resource Power Manager found in Qualcomm
+	  8974 based devices.
+
+	  Say M here if you want to include support for the regulators on the
+	  Qualcomm RPM as a module. The module will be named
+	  "qcom_smd-regulator".
+
+config REGULATOR_QCOM_SPMI
+	tristate "Qualcomm SPMI regulator driver"
+	depends on SPMI || COMPILE_TEST
+	help
+	  If you say yes to this option, support will be included for the
+	  regulators found in Qualcomm SPMI PMICs.
+
+	  Say M here if you want to include support for the regulators on the
+	  Qualcomm SPMI PMICs as a module. The module will be named
+	  "qcom_spmi-regulator".
+
 config REGULATOR_RC5T583
 	tristate "RICOH RC5T583 Power regulators"
 	depends on MFD_RC5T583
@@ -593,7 +628,7 @@ config REGULATOR_TI_ABB
 
 config REGULATOR_STW481X_VMMC
 	bool "ST Microelectronics STW481X VMMC regulator"
-	depends on MFD_STW481X
+	depends on MFD_STW481X || COMPILE_TEST
 	default y if MFD_STW481X
 	help
 	  This driver supports the internal VMMC regulator in the STw481x
diff --git a/kernel/drivers/regulator/Makefile b/kernel/drivers/regulator/Makefile
index 2c4da15e1..0f8174913 100644
--- a/kernel/drivers/regulator/Makefile
+++ b/kernel/drivers/regulator/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_REGULATOR_BCM590XX) += bcm590xx-regulator.o
 obj-$(CONFIG_REGULATOR_DA903X)	+= da903x.o
 obj-$(CONFIG_REGULATOR_DA9052)	+= da9052-regulator.o
 obj-$(CONFIG_REGULATOR_DA9055)	+= da9055-regulator.o
+obj-$(CONFIG_REGULATOR_DA9062)	+= da9062-regulator.o
 obj-$(CONFIG_REGULATOR_DA9063)	+= da9063-regulator.o
 obj-$(CONFIG_REGULATOR_DA9210) += da9210-regulator.o
 obj-$(CONFIG_REGULATOR_DA9211) += da9211-regulator.o
@@ -55,12 +56,14 @@ obj-$(CONFIG_REGULATOR_MAX8998) += max8998.o
 obj-$(CONFIG_REGULATOR_MAX77686) += max77686.o
 obj-$(CONFIG_REGULATOR_MAX77693) += max77693.o
 obj-$(CONFIG_REGULATOR_MAX77802) += max77802.o
-obj-$(CONFIG_REGULATOR_MAX77843) += max77843.o
 obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
 obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
 obj-$(CONFIG_REGULATOR_MC13XXX_CORE) +=  mc13xxx-regulator-core.o
+obj-$(CONFIG_REGULATOR_MT6311) += mt6311-regulator.o
 obj-$(CONFIG_REGULATOR_MT6397)	+= mt6397-regulator.o
 obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o
+obj-$(CONFIG_REGULATOR_QCOM_SMD_RPM) += qcom_smd-regulator.o
+obj-$(CONFIG_REGULATOR_QCOM_SPMI) += qcom_spmi-regulator.o
 obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
 obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o
 obj-$(CONFIG_REGULATOR_PWM) += pwm-regulator.o
diff --git a/kernel/drivers/regulator/act8865-regulator.c b/kernel/drivers/regulator/act8865-regulator.c
index 2ff73d72c..f8d4cd3d1 100644
--- a/kernel/drivers/regulator/act8865-regulator.c
+++ b/kernel/drivers/regulator/act8865-regulator.c
@@ -261,6 +261,16 @@ static const struct regulator_desc act8865_regulators[] = {
 	ACT88xx_REG("LDO_REG4", ACT8865, LDO4, VSET, "inl67"),
 };
 
+static const struct regulator_desc act8865_alt_regulators[] = {
+	ACT88xx_REG("DCDC_REG1", ACT8865, DCDC1, VSET2, "vp1"),
+	ACT88xx_REG("DCDC_REG2", ACT8865, DCDC2, VSET2, "vp2"),
+	ACT88xx_REG("DCDC_REG3", ACT8865, DCDC3, VSET2, "vp3"),
+	ACT88xx_REG("LDO_REG1", ACT8865, LDO1, VSET, "inl45"),
+	ACT88xx_REG("LDO_REG2", ACT8865, LDO2, VSET, "inl45"),
+	ACT88xx_REG("LDO_REG3", ACT8865, LDO3, VSET, "inl67"),
+	ACT88xx_REG("LDO_REG4", ACT8865, LDO4, VSET, "inl67"),
+};
+
 #ifdef CONFIG_OF
 static const struct of_device_id act8865_dt_ids[] = {
 	{ .compatible = "active-semi,act8600", .data = (void *)ACT8600 },
@@ -413,6 +423,7 @@ static int act8865_pmic_probe(struct i2c_client *client,
 	struct act8865 *act8865;
 	unsigned long type;
 	int off_reg, off_mask;
+	int voltage_select = 0;
 
 	pdata = dev_get_platdata(dev);
 
@@ -424,6 +435,10 @@ static int act8865_pmic_probe(struct i2c_client *client,
 			return -ENODEV;
 
 		type = (unsigned long) id->data;
+
+		voltage_select = !!of_get_property(dev->of_node,
+						   "active-semi,vsel-high",
+						   NULL);
 	} else {
 		type = i2c_id->driver_data;
 	}
@@ -442,8 +457,13 @@ static int act8865_pmic_probe(struct i2c_client *client,
 		off_mask = ACT8846_OFF_SYSMASK;
 		break;
 	case ACT8865:
-		regulators = act8865_regulators;
-		num_regulators = ARRAY_SIZE(act8865_regulators);
+		if (voltage_select) {
+			regulators = act8865_alt_regulators;
+			num_regulators = ARRAY_SIZE(act8865_alt_regulators);
+		} else {
+			regulators = act8865_regulators;
+			num_regulators = ARRAY_SIZE(act8865_regulators);
+		}
 		off_reg = ACT8865_SYS_CTRL;
 		off_mask = ACT8865_MSTROFF;
 		break;
@@ -530,7 +550,6 @@ MODULE_DEVICE_TABLE(i2c, act8865_ids);
 static struct i2c_driver act8865_pmic_driver = {
 	.driver	= {
 		.name	= "act8865",
-		.owner	= THIS_MODULE,
 	},
 	.probe		= act8865_pmic_probe,
 	.id_table	= act8865_ids,
diff --git a/kernel/drivers/regulator/ad5398.c b/kernel/drivers/regulator/ad5398.c
index 48016a050..ea50a886b 100644
--- a/kernel/drivers/regulator/ad5398.c
+++ b/kernel/drivers/regulator/ad5398.c
@@ -275,4 +275,3 @@ module_exit(ad5398_exit);
 MODULE_DESCRIPTION("AD5398 and AD5821 current regulator driver");
 MODULE_AUTHOR("Sonic Zhang");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("i2c:ad5398-regulator");
diff --git a/kernel/drivers/regulator/anatop-regulator.c b/kernel/drivers/regulator/anatop-regulator.c
index 738adfa53..63cd5e68c 100644
--- a/kernel/drivers/regulator/anatop-regulator.c
+++ b/kernel/drivers/regulator/anatop-regulator.c
@@ -30,6 +30,7 @@
 #include <linux/regmap.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/of_regulator.h>
+#include <linux/regulator/machine.h>
 
 #define LDO_RAMP_UP_UNIT_IN_CYCLES      64 /* 64 cycles per step */
 #define LDO_RAMP_UP_FREQ_IN_MHZ         24 /* cycle based on 24M OSC */
@@ -199,6 +200,7 @@ static int anatop_regulator_probe(struct platform_device *pdev)
 	rdesc->owner = THIS_MODULE;
 
 	initdata = of_get_regulator_init_data(dev, np, rdesc);
+	initdata->supply_regulator = "vin";
 	sreg->initdata = initdata;
 
 	anatop_np = of_get_parent(np);
@@ -262,6 +264,7 @@ static int anatop_regulator_probe(struct platform_device *pdev)
 	rdesc->vsel_reg = sreg->control_reg;
 	rdesc->vsel_mask = ((1 << sreg->vol_bit_width) - 1) <<
 			   sreg->vol_bit_shift;
+	rdesc->min_dropout_uV = 125000;
 
 	config.dev = &pdev->dev;
 	config.init_data = initdata;
@@ -318,6 +321,7 @@ static const struct of_device_id of_anatop_regulator_match_tbl[] = {
 	{ .compatible = "fsl,anatop-regulator", },
 	{ /* end */ }
 };
+MODULE_DEVICE_TABLE(of, of_anatop_regulator_match_tbl);
 
 static struct platform_driver anatop_regulator_driver = {
 	.driver = {
diff --git a/kernel/drivers/regulator/arizona-ldo1.c b/kernel/drivers/regulator/arizona-ldo1.c
index a1d07d347..f7c88ff90 100644
--- a/kernel/drivers/regulator/arizona-ldo1.c
+++ b/kernel/drivers/regulator/arizona-ldo1.c
@@ -17,6 +17,7 @@
 #include <linux/bitops.h>
 #include <linux/err.h>
 #include <linux/of.h>
+#include <linux/of_gpio.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
@@ -78,11 +79,6 @@ static int arizona_ldo1_hc_set_voltage_sel(struct regulator_dev *rdev,
 	if (ret != 0)
 		return ret;
 
-	ret = regmap_update_bits(regmap, ARIZONA_DYNAMIC_FREQUENCY_SCALING_1,
-				 ARIZONA_SUBSYS_MAX_FREQ, val);
-	if (ret != 0)
-		return ret;
-
 	if (val)
 		return 0;
 
@@ -178,19 +174,38 @@ static const struct regulator_init_data arizona_ldo1_default = {
 	.num_consumer_supplies = 1,
 };
 
+static const struct regulator_init_data arizona_ldo1_wm5110 = {
+	.constraints = {
+		.min_uV = 1175000,
+		.max_uV = 1200000,
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS |
+				  REGULATOR_CHANGE_VOLTAGE,
+	},
+	.num_consumer_supplies = 1,
+};
+
 static int arizona_ldo1_of_get_pdata(struct arizona *arizona,
 				     struct regulator_config *config,
 				     const struct regulator_desc *desc)
 {
 	struct arizona_pdata *pdata = &arizona->pdata;
 	struct arizona_ldo1 *ldo1 = config->driver_data;
+	struct device_node *np = arizona->dev->of_node;
 	struct device_node *init_node, *dcvdd_node;
 	struct regulator_init_data *init_data;
 
-	pdata->ldoena = arizona_of_get_named_gpio(arizona, "wlf,ldoena", true);
+	pdata->ldoena = of_get_named_gpio(np, "wlf,ldoena", 0);
+	if (pdata->ldoena < 0) {
+		dev_warn(arizona->dev,
+			 "LDOENA GPIO property missing/malformed: %d\n",
+			 pdata->ldoena);
+		pdata->ldoena = 0;
+	} else {
+		config->ena_gpio_initialized = true;
+	}
 
-	init_node = of_get_child_by_name(arizona->dev->of_node, "ldo1");
-	dcvdd_node = of_parse_phandle(arizona->dev->of_node, "DCVDD-supply", 0);
+	init_node = of_get_child_by_name(np, "ldo1");
+	dcvdd_node = of_parse_phandle(np, "DCVDD-supply", 0);
 
 	if (init_node) {
 		config->of_node = init_node;
@@ -240,9 +255,16 @@ static int arizona_ldo1_probe(struct platform_device *pdev)
 	switch (arizona->type) {
 	case WM5102:
 	case WM8997:
+	case WM8998:
+	case WM1814:
 		desc = &arizona_ldo1_hc;
 		ldo1->init_data = arizona_ldo1_dvfs;
 		break;
+	case WM5110:
+	case WM8280:
+		desc = &arizona_ldo1;
+		ldo1->init_data = arizona_ldo1_wm5110;
+		break;
 	default:
 		desc = &arizona_ldo1;
 		ldo1->init_data = arizona_ldo1_default;
@@ -262,8 +284,6 @@ static int arizona_ldo1_probe(struct platform_device *pdev)
 			ret = arizona_ldo1_of_get_pdata(arizona, &config, desc);
 			if (ret < 0)
 				return ret;
-
-			config.ena_gpio_initialized = true;
 		}
 	}
 
diff --git a/kernel/drivers/regulator/axp20x-regulator.c b/kernel/drivers/regulator/axp20x-regulator.c
index e4331f5e5..f2e1a39ce 100644
--- a/kernel/drivers/regulator/axp20x-regulator.c
+++ b/kernel/drivers/regulator/axp20x-regulator.c
@@ -27,20 +27,24 @@
 #define AXP20X_IO_ENABLED		0x03
 #define AXP20X_IO_DISABLED		0x07
 
+#define AXP22X_IO_ENABLED		0x03
+#define AXP22X_IO_DISABLED		0x04
+
 #define AXP20X_WORKMODE_DCDC2_MASK	BIT(2)
 #define AXP20X_WORKMODE_DCDC3_MASK	BIT(1)
+#define AXP22X_WORKMODE_DCDCX_MASK(x)	BIT(x)
 
 #define AXP20X_FREQ_DCDC_MASK		0x0f
 
-#define AXP20X_DESC_IO(_id, _match, _supply, _min, _max, _step, _vreg, _vmask,	\
-		       _ereg, _emask, _enable_val, _disable_val)		\
-	[AXP20X_##_id] = {							\
+#define AXP_DESC_IO(_family, _id, _match, _supply, _min, _max, _step, _vreg,	\
+		    _vmask, _ereg, _emask, _enable_val, _disable_val)		\
+	[_family##_##_id] = {							\
 		.name		= #_id,						\
 		.supply_name	= (_supply),					\
 		.of_match	= of_match_ptr(_match),				\
 		.regulators_node = of_match_ptr("regulators"),			\
 		.type		= REGULATOR_VOLTAGE,				\
-		.id		= AXP20X_##_id,					\
+		.id		= _family##_##_id,				\
 		.n_voltages	= (((_max) - (_min)) / (_step) + 1),		\
 		.owner		= THIS_MODULE,					\
 		.min_uV		= (_min) * 1000,				\
@@ -54,15 +58,15 @@
 		.ops		= &axp20x_ops,					\
 	}
 
-#define AXP20X_DESC(_id, _match, _supply, _min, _max, _step, _vreg, _vmask,	\
-		    _ereg, _emask)						\
-	[AXP20X_##_id] = {							\
+#define AXP_DESC(_family, _id, _match, _supply, _min, _max, _step, _vreg,	\
+		 _vmask, _ereg, _emask) 					\
+	[_family##_##_id] = {							\
 		.name		= #_id,						\
 		.supply_name	= (_supply),					\
 		.of_match	= of_match_ptr(_match),				\
 		.regulators_node = of_match_ptr("regulators"),			\
 		.type		= REGULATOR_VOLTAGE,				\
-		.id		= AXP20X_##_id,					\
+		.id		= _family##_##_id,				\
 		.n_voltages	= (((_max) - (_min)) / (_step) + 1),		\
 		.owner		= THIS_MODULE,					\
 		.min_uV		= (_min) * 1000,				\
@@ -74,29 +78,49 @@
 		.ops		= &axp20x_ops,					\
 	}
 
-#define AXP20X_DESC_FIXED(_id, _match, _supply, _volt)				\
-	[AXP20X_##_id] = {							\
+#define AXP_DESC_SW(_family, _id, _match, _supply, _min, _max, _step, _vreg,	\
+		    _vmask, _ereg, _emask) 					\
+	[_family##_##_id] = {							\
+		.name		= #_id,						\
+		.supply_name	= (_supply),					\
+		.of_match	= of_match_ptr(_match),				\
+		.regulators_node = of_match_ptr("regulators"),			\
+		.type		= REGULATOR_VOLTAGE,				\
+		.id		= _family##_##_id,				\
+		.n_voltages	= (((_max) - (_min)) / (_step) + 1),		\
+		.owner		= THIS_MODULE,					\
+		.min_uV		= (_min) * 1000,				\
+		.uV_step	= (_step) * 1000,				\
+		.vsel_reg	= (_vreg),					\
+		.vsel_mask	= (_vmask),					\
+		.enable_reg	= (_ereg),					\
+		.enable_mask	= (_emask),					\
+		.ops		= &axp20x_ops_sw,				\
+	}
+
+#define AXP_DESC_FIXED(_family, _id, _match, _supply, _volt)			\
+	[_family##_##_id] = {							\
 		.name		= #_id,						\
 		.supply_name	= (_supply),					\
 		.of_match	= of_match_ptr(_match),				\
 		.regulators_node = of_match_ptr("regulators"),			\
 		.type		= REGULATOR_VOLTAGE,				\
-		.id		= AXP20X_##_id,					\
+		.id		= _family##_##_id,				\
 		.n_voltages	= 1,						\
 		.owner		= THIS_MODULE,					\
 		.min_uV		= (_volt) * 1000,				\
 		.ops		= &axp20x_ops_fixed				\
 	}
 
-#define AXP20X_DESC_TABLE(_id, _match, _supply, _table, _vreg, _vmask, _ereg,	\
-			  _emask)						\
-	[AXP20X_##_id] = {							\
+#define AXP_DESC_TABLE(_family, _id, _match, _supply, _table, _vreg, _vmask,	\
+		       _ereg, _emask)						\
+	[_family##_##_id] = {							\
 		.name		= #_id,						\
 		.supply_name	= (_supply),					\
 		.of_match	= of_match_ptr(_match),				\
 		.regulators_node = of_match_ptr("regulators"),			\
 		.type		= REGULATOR_VOLTAGE,				\
-		.id		= AXP20X_##_id,					\
+		.id		= _family##_##_id,				\
 		.n_voltages	= ARRAY_SIZE(_table),				\
 		.owner		= THIS_MODULE,					\
 		.vsel_reg	= (_vreg),					\
@@ -135,38 +159,118 @@ static struct regulator_ops axp20x_ops = {
 	.is_enabled		= regulator_is_enabled_regmap,
 };
 
+static struct regulator_ops axp20x_ops_sw = {
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.list_voltage		= regulator_list_voltage_linear,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.is_enabled		= regulator_is_enabled_regmap,
+};
+
 static const struct regulator_desc axp20x_regulators[] = {
-	AXP20X_DESC(DCDC2, "dcdc2", "vin2", 700, 2275, 25, AXP20X_DCDC2_V_OUT,
-		    0x3f, AXP20X_PWR_OUT_CTRL, 0x10),
-	AXP20X_DESC(DCDC3, "dcdc3", "vin3", 700, 3500, 25, AXP20X_DCDC3_V_OUT,
-		    0x7f, AXP20X_PWR_OUT_CTRL, 0x02),
-	AXP20X_DESC_FIXED(LDO1, "ldo1", "acin", 1300),
-	AXP20X_DESC(LDO2, "ldo2", "ldo24in", 1800, 3300, 100,
-		    AXP20X_LDO24_V_OUT, 0xf0, AXP20X_PWR_OUT_CTRL, 0x04),
-	AXP20X_DESC(LDO3, "ldo3", "ldo3in", 700, 3500, 25, AXP20X_LDO3_V_OUT,
-		    0x7f, AXP20X_PWR_OUT_CTRL, 0x40),
-	AXP20X_DESC_TABLE(LDO4, "ldo4", "ldo24in", axp20x_ldo4_data,
-			  AXP20X_LDO24_V_OUT, 0x0f, AXP20X_PWR_OUT_CTRL, 0x08),
-	AXP20X_DESC_IO(LDO5, "ldo5", "ldo5in", 1800, 3300, 100,
-		       AXP20X_LDO5_V_OUT, 0xf0, AXP20X_GPIO0_CTRL, 0x07,
-		       AXP20X_IO_ENABLED, AXP20X_IO_DISABLED),
+	AXP_DESC(AXP20X, DCDC2, "dcdc2", "vin2", 700, 2275, 25,
+		 AXP20X_DCDC2_V_OUT, 0x3f, AXP20X_PWR_OUT_CTRL, 0x10),
+	AXP_DESC(AXP20X, DCDC3, "dcdc3", "vin3", 700, 3500, 25,
+		 AXP20X_DCDC3_V_OUT, 0x7f, AXP20X_PWR_OUT_CTRL, 0x02),
+	AXP_DESC_FIXED(AXP20X, LDO1, "ldo1", "acin", 1300),
+	AXP_DESC(AXP20X, LDO2, "ldo2", "ldo24in", 1800, 3300, 100,
+		 AXP20X_LDO24_V_OUT, 0xf0, AXP20X_PWR_OUT_CTRL, 0x04),
+	AXP_DESC(AXP20X, LDO3, "ldo3", "ldo3in", 700, 3500, 25,
+		 AXP20X_LDO3_V_OUT, 0x7f, AXP20X_PWR_OUT_CTRL, 0x40),
+	AXP_DESC_TABLE(AXP20X, LDO4, "ldo4", "ldo24in", axp20x_ldo4_data,
+		       AXP20X_LDO24_V_OUT, 0x0f, AXP20X_PWR_OUT_CTRL, 0x08),
+	AXP_DESC_IO(AXP20X, LDO5, "ldo5", "ldo5in", 1800, 3300, 100,
+		    AXP20X_LDO5_V_OUT, 0xf0, AXP20X_GPIO0_CTRL, 0x07,
+		    AXP20X_IO_ENABLED, AXP20X_IO_DISABLED),
+};
+
+static const struct regulator_desc axp22x_regulators[] = {
+	AXP_DESC(AXP22X, DCDC1, "dcdc1", "vin1", 1600, 3400, 100,
+		 AXP22X_DCDC1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(1)),
+	AXP_DESC(AXP22X, DCDC2, "dcdc2", "vin2", 600, 1540, 20,
+		 AXP22X_DCDC2_V_OUT, 0x3f, AXP22X_PWR_OUT_CTRL1, BIT(2)),
+	AXP_DESC(AXP22X, DCDC3, "dcdc3", "vin3", 600, 1860, 20,
+		 AXP22X_DCDC3_V_OUT, 0x3f, AXP22X_PWR_OUT_CTRL1, BIT(3)),
+	AXP_DESC(AXP22X, DCDC4, "dcdc4", "vin4", 600, 1540, 20,
+		 AXP22X_DCDC4_V_OUT, 0x3f, AXP22X_PWR_OUT_CTRL1, BIT(4)),
+	AXP_DESC(AXP22X, DCDC5, "dcdc5", "vin5", 1000, 2550, 50,
+		 AXP22X_DCDC5_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(5)),
+	/* secondary switchable output of DCDC1 */
+	AXP_DESC_SW(AXP22X, DC1SW, "dc1sw", NULL, 1600, 3400, 100,
+		    AXP22X_DCDC1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(7)),
+	/* LDO regulator internally chained to DCDC5 */
+	AXP_DESC(AXP22X, DC5LDO, "dc5ldo", NULL, 700, 1400, 100,
+		 AXP22X_DC5LDO_V_OUT, 0x7, AXP22X_PWR_OUT_CTRL1, BIT(0)),
+	AXP_DESC(AXP22X, ALDO1, "aldo1", "aldoin", 700, 3300, 100,
+		 AXP22X_ALDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(6)),
+	AXP_DESC(AXP22X, ALDO2, "aldo2", "aldoin", 700, 3300, 100,
+		 AXP22X_ALDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(7)),
+	AXP_DESC(AXP22X, ALDO3, "aldo3", "aldoin", 700, 3300, 100,
+		 AXP22X_ALDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL3, BIT(7)),
+	AXP_DESC(AXP22X, DLDO1, "dldo1", "dldoin", 700, 3300, 100,
+		 AXP22X_DLDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(3)),
+	AXP_DESC(AXP22X, DLDO2, "dldo2", "dldoin", 700, 3300, 100,
+		 AXP22X_DLDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(4)),
+	AXP_DESC(AXP22X, DLDO3, "dldo3", "dldoin", 700, 3300, 100,
+		 AXP22X_DLDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(5)),
+	AXP_DESC(AXP22X, DLDO4, "dldo4", "dldoin", 700, 3300, 100,
+		 AXP22X_DLDO4_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(6)),
+	AXP_DESC(AXP22X, ELDO1, "eldo1", "eldoin", 700, 3300, 100,
+		 AXP22X_ELDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(0)),
+	AXP_DESC(AXP22X, ELDO2, "eldo2", "eldoin", 700, 3300, 100,
+		 AXP22X_ELDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(1)),
+	AXP_DESC(AXP22X, ELDO3, "eldo3", "eldoin", 700, 3300, 100,
+		 AXP22X_ELDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(2)),
+	AXP_DESC_IO(AXP22X, LDO_IO0, "ldo_io0", "ips", 1800, 3300, 100,
+		    AXP22X_LDO_IO0_V_OUT, 0x1f, AXP20X_GPIO0_CTRL, 0x07,
+		    AXP22X_IO_ENABLED, AXP22X_IO_DISABLED),
+	AXP_DESC_IO(AXP22X, LDO_IO1, "ldo_io1", "ips", 1800, 3300, 100,
+		    AXP22X_LDO_IO1_V_OUT, 0x1f, AXP20X_GPIO1_CTRL, 0x07,
+		    AXP22X_IO_ENABLED, AXP22X_IO_DISABLED),
+	AXP_DESC_FIXED(AXP22X, RTC_LDO, "rtc_ldo", "ips", 3000),
 };
 
 static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq)
 {
 	struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
+	u32 min, max, def, step;
+
+	switch (axp20x->variant) {
+	case AXP202_ID:
+	case AXP209_ID:
+		min = 750;
+		max = 1875;
+		def = 1500;
+		step = 75;
+		break;
+	case AXP221_ID:
+		min = 1800;
+		max = 4050;
+		def = 3000;
+		step = 150;
+		break;
+	default:
+		dev_err(&pdev->dev,
+			"Setting DCDC frequency for unsupported AXP variant\n");
+		return -EINVAL;
+	}
+
+	if (dcdcfreq == 0)
+		dcdcfreq = def;
 
-	if (dcdcfreq < 750) {
-		dcdcfreq = 750;
-		dev_warn(&pdev->dev, "DCDC frequency too low. Set to 750kHz\n");
+	if (dcdcfreq < min) {
+		dcdcfreq = min;
+		dev_warn(&pdev->dev, "DCDC frequency too low. Set to %ukHz\n",
+			 min);
 	}
 
-	if (dcdcfreq > 1875) {
-		dcdcfreq = 1875;
-		dev_warn(&pdev->dev, "DCDC frequency too high. Set to 1875kHz\n");
+	if (dcdcfreq > max) {
+		dcdcfreq = max;
+		dev_warn(&pdev->dev, "DCDC frequency too high. Set to %ukHz\n",
+			 max);
 	}
 
-	dcdcfreq = (dcdcfreq - 750) / 75;
+	dcdcfreq = (dcdcfreq - min) / step;
 
 	return regmap_update_bits(axp20x->regmap, AXP20X_DCDC_FREQ,
 				  AXP20X_FREQ_DCDC_MASK, dcdcfreq);
@@ -176,7 +280,7 @@ static int axp20x_regulator_parse_dt(struct platform_device *pdev)
 {
 	struct device_node *np, *regulators;
 	int ret;
-	u32 dcdcfreq;
+	u32 dcdcfreq = 0;
 
 	np = of_node_get(pdev->dev.parent->of_node);
 	if (!np)
@@ -186,7 +290,6 @@ static int axp20x_regulator_parse_dt(struct platform_device *pdev)
 	if (!regulators) {
 		dev_warn(&pdev->dev, "regulators node not found\n");
 	} else {
-		dcdcfreq = 1500;
 		of_property_read_u32(regulators, "x-powers,dcdc-freq", &dcdcfreq);
 		ret = axp20x_set_dcdc_freq(pdev, dcdcfreq);
 		if (ret < 0) {
@@ -202,15 +305,35 @@ static int axp20x_regulator_parse_dt(struct platform_device *pdev)
 
 static int axp20x_set_dcdc_workmode(struct regulator_dev *rdev, int id, u32 workmode)
 {
-	unsigned int mask = AXP20X_WORKMODE_DCDC2_MASK;
+	struct axp20x_dev *axp20x = rdev_get_drvdata(rdev);
+	unsigned int mask;
 
-	if ((id != AXP20X_DCDC2) && (id != AXP20X_DCDC3))
-		return -EINVAL;
+	switch (axp20x->variant) {
+	case AXP202_ID:
+	case AXP209_ID:
+		if ((id != AXP20X_DCDC2) && (id != AXP20X_DCDC3))
+			return -EINVAL;
+
+		mask = AXP20X_WORKMODE_DCDC2_MASK;
+		if (id == AXP20X_DCDC3)
+			mask = AXP20X_WORKMODE_DCDC3_MASK;
 
-	if (id == AXP20X_DCDC3)
-		mask = AXP20X_WORKMODE_DCDC3_MASK;
+		workmode <<= ffs(mask) - 1;
+		break;
 
-	workmode <<= ffs(mask) - 1;
+	case AXP221_ID:
+		if (id < AXP22X_DCDC1 || id > AXP22X_DCDC5)
+			return -EINVAL;
+
+		mask = AXP22X_WORKMODE_DCDCX_MASK(id - AXP22X_DCDC1);
+		workmode <<= id - AXP22X_DCDC1;
+		break;
+
+	default:
+		/* should not happen */
+		WARN_ON(1);
+		return -EINVAL;
+	}
 
 	return regmap_update_bits(rdev->regmap, AXP20X_DCDC_MODE, mask, workmode);
 }
@@ -219,22 +342,71 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
 {
 	struct regulator_dev *rdev;
 	struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
+	const struct regulator_desc *regulators;
 	struct regulator_config config = {
 		.dev = pdev->dev.parent,
 		.regmap = axp20x->regmap,
+		.driver_data = axp20x,
 	};
-	int ret, i;
+	int ret, i, nregulators;
 	u32 workmode;
+	const char *axp22x_dc1_name = axp22x_regulators[AXP22X_DCDC1].name;
+	const char *axp22x_dc5_name = axp22x_regulators[AXP22X_DCDC5].name;
+
+	switch (axp20x->variant) {
+	case AXP202_ID:
+	case AXP209_ID:
+		regulators = axp20x_regulators;
+		nregulators = AXP20X_REG_ID_MAX;
+		break;
+	case AXP221_ID:
+		regulators = axp22x_regulators;
+		nregulators = AXP22X_REG_ID_MAX;
+		break;
+	default:
+		dev_err(&pdev->dev, "Unsupported AXP variant: %ld\n",
+			axp20x->variant);
+		return -EINVAL;
+	}
 
 	/* This only sets the dcdc freq. Ignore any errors */
 	axp20x_regulator_parse_dt(pdev);
 
-	for (i = 0; i < AXP20X_REG_ID_MAX; i++) {
-		rdev = devm_regulator_register(&pdev->dev, &axp20x_regulators[i],
-					       &config);
+	for (i = 0; i < nregulators; i++) {
+		const struct regulator_desc *desc = &regulators[i];
+		struct regulator_desc *new_desc;
+
+		/*
+		 * Regulators DC1SW and DC5LDO are connected internally,
+		 * so we have to handle their supply names separately.
+		 *
+		 * We always register the regulators in proper sequence,
+		 * so the supply names are correctly read. See the last
+		 * part of this loop to see where we save the DT defined
+		 * name.
+		 */
+		if (regulators == axp22x_regulators) {
+			if (i == AXP22X_DC1SW) {
+				new_desc = devm_kzalloc(&pdev->dev,
+							sizeof(*desc),
+							GFP_KERNEL);
+				*new_desc = regulators[i];
+				new_desc->supply_name = axp22x_dc1_name;
+				desc = new_desc;
+			} else if (i == AXP22X_DC5LDO) {
+				new_desc = devm_kzalloc(&pdev->dev,
+							sizeof(*desc),
+							GFP_KERNEL);
+				*new_desc = regulators[i];
+				new_desc->supply_name = axp22x_dc5_name;
+				desc = new_desc;
+			}
+		}
+
+		rdev = devm_regulator_register(&pdev->dev, desc, &config);
 		if (IS_ERR(rdev)) {
 			dev_err(&pdev->dev, "Failed to register %s\n",
-				axp20x_regulators[i].name);
+				regulators[i].name);
 
 			return PTR_ERR(rdev);
 		}
@@ -245,7 +417,22 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
 		if (!ret) {
 			if (axp20x_set_dcdc_workmode(rdev, i, workmode))
 				dev_err(&pdev->dev, "Failed to set workmode on %s\n",
-					axp20x_regulators[i].name);
+					rdev->desc->name);
+		}
+
+		/*
+		 * Save AXP22X DCDC1 / DCDC5 regulator names for later.
+		 */
+		if (regulators == axp22x_regulators) {
+			/* Can we use rdev->constraints->name instead? */
+			if (i == AXP22X_DCDC1)
+				of_property_read_string(rdev->dev.of_node,
+							"regulator-name",
+							&axp22x_dc1_name);
+			else if (i == AXP22X_DCDC5)
+				of_property_read_string(rdev->dev.of_node,
+							"regulator-name",
+							&axp22x_dc5_name);
 		}
 	}
 
@@ -264,3 +451,4 @@ module_platform_driver(axp20x_regulator_driver);
 MODULE_LICENSE("GPL v2");
 MODULE_AUTHOR("Carlo Caione <carlo@caione.org>");
 MODULE_DESCRIPTION("Regulator Driver for AXP20X PMIC");
+MODULE_ALIAS("platform:axp20x-regulator");
diff --git a/kernel/drivers/regulator/bcm590xx-regulator.c b/kernel/drivers/regulator/bcm590xx-regulator.c
index 628430bdc..76b01835d 100644
--- a/kernel/drivers/regulator/bcm590xx-regulator.c
+++ b/kernel/drivers/regulator/bcm590xx-regulator.c
@@ -244,7 +244,7 @@ static int bcm590xx_get_enable_register(int id)
 			break;
 		case BCM590XX_REG_VBUS:
 			reg = BCM590XX_OTG_CTRL;
-		};
+		}
 
 
 	return reg;
diff --git a/kernel/drivers/regulator/core.c b/kernel/drivers/regulator/core.c
index 8a28116b5..73b768335 100644
--- a/kernel/drivers/regulator/core.c
+++ b/kernel/drivers/regulator/core.c
@@ -51,7 +51,6 @@
 	pr_debug("%s: " fmt, rdev_get_name(rdev), ##__VA_ARGS__)
 
 static DEFINE_MUTEX(regulator_list_mutex);
-static LIST_HEAD(regulator_list);
 static LIST_HEAD(regulator_map_list);
 static LIST_HEAD(regulator_ena_gpio_list);
 static LIST_HEAD(regulator_supply_alias_list);
@@ -59,6 +58,8 @@ static bool has_full_constraints;
 
 static struct dentry *debugfs_root;
 
+static struct class regulator_class;
+
 /*
  * struct regulator_map
  *
@@ -109,6 +110,12 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev,
 static struct regulator *create_regulator(struct regulator_dev *rdev,
 					  struct device *dev,
 					  const char *supply_name);
+static void _regulator_put(struct regulator *regulator);
+
+static struct regulator_dev *dev_to_rdev(struct device *dev)
+{
+	return container_of(dev, struct regulator_dev, dev);
+}
 
 static const char *rdev_get_name(struct regulator_dev *rdev)
 {
@@ -126,6 +133,45 @@ static bool have_full_constraints(void)
 }
 
 /**
+ * regulator_lock_supply - lock a regulator and its supplies
+ * @rdev:         regulator source
+ */
+static void regulator_lock_supply(struct regulator_dev *rdev)
+{
+	struct regulator *supply;
+	int i = 0;
+
+	while (1) {
+		mutex_lock_nested(&rdev->mutex, i++);
+		supply = rdev->supply;
+
+		if (!rdev->supply)
+			return;
+
+		rdev = supply->rdev;
+	}
+}
+
+/**
+ * regulator_unlock_supply - unlock a regulator and its supplies
+ * @rdev:         regulator source
+ */
+static void regulator_unlock_supply(struct regulator_dev *rdev)
+{
+	struct regulator *supply;
+
+	while (1) {
+		mutex_unlock(&rdev->mutex);
+		supply = rdev->supply;
+
+		if (!rdev->supply)
+			return;
+
+		rdev = supply->rdev;
+	}
+}
+
+/**
  * of_get_regulator - get a regulator device node based on supply name
  * @dev: Device pointer for the consumer (of regulator) device
  * @supply: regulator supply name
@@ -174,7 +220,7 @@ static int regulator_check_voltage(struct regulator_dev *rdev,
 		return -ENODEV;
 	}
 	if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) {
-		rdev_err(rdev, "operation not allowed\n");
+		rdev_err(rdev, "voltage operation not allowed\n");
 		return -EPERM;
 	}
 
@@ -234,7 +280,7 @@ static int regulator_check_current_limit(struct regulator_dev *rdev,
 		return -ENODEV;
 	}
 	if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_CURRENT)) {
-		rdev_err(rdev, "operation not allowed\n");
+		rdev_err(rdev, "current operation not allowed\n");
 		return -EPERM;
 	}
 
@@ -271,7 +317,7 @@ static int regulator_mode_constrain(struct regulator_dev *rdev, int *mode)
 		return -ENODEV;
 	}
 	if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_MODE)) {
-		rdev_err(rdev, "operation not allowed\n");
+		rdev_err(rdev, "mode operation not allowed\n");
 		return -EPERM;
 	}
 
@@ -295,7 +341,7 @@ static int regulator_check_drms(struct regulator_dev *rdev)
 		return -ENODEV;
 	}
 	if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_DRMS)) {
-		rdev_err(rdev, "operation not allowed\n");
+		rdev_dbg(rdev, "drms operation not allowed\n");
 		return -EPERM;
 	}
 	return 0;
@@ -640,6 +686,8 @@ static int drms_uA_update(struct regulator_dev *rdev)
 	int current_uA = 0, output_uV, input_uV, err;
 	unsigned int mode;
 
+	lockdep_assert_held_once(&rdev->mutex);
+
 	/*
 	 * first check to see if we can set modes at all, otherwise just
 	 * tell the consumer everything is OK.
@@ -678,6 +726,8 @@ static int drms_uA_update(struct regulator_dev *rdev)
 	list_for_each_entry(sibling, &rdev->consumer_list, list)
 		current_uA += sibling->uA_load;
 
+	current_uA += rdev->constraints->system_load;
+
 	if (rdev->desc->ops->set_load) {
 		/* set the optimum mode for our new total regulator load */
 		err = rdev->desc->ops->set_load(rdev, current_uA);
@@ -758,6 +808,8 @@ static int suspend_set_state(struct regulator_dev *rdev,
 /* locks held by caller */
 static int suspend_prepare(struct regulator_dev *rdev, suspend_state_t state)
 {
+	lockdep_assert_held_once(&rdev->mutex);
+
 	if (!rdev->constraints)
 		return -EINVAL;
 
@@ -780,58 +832,63 @@ static void print_constraints(struct regulator_dev *rdev)
 {
 	struct regulation_constraints *constraints = rdev->constraints;
 	char buf[160] = "";
+	size_t len = sizeof(buf) - 1;
 	int count = 0;
 	int ret;
 
 	if (constraints->min_uV && constraints->max_uV) {
 		if (constraints->min_uV == constraints->max_uV)
-			count += sprintf(buf + count, "%d mV ",
-					 constraints->min_uV / 1000);
+			count += scnprintf(buf + count, len - count, "%d mV ",
+					   constraints->min_uV / 1000);
 		else
-			count += sprintf(buf + count, "%d <--> %d mV ",
-					 constraints->min_uV / 1000,
-					 constraints->max_uV / 1000);
+			count += scnprintf(buf + count, len - count,
+					   "%d <--> %d mV ",
+					   constraints->min_uV / 1000,
+					   constraints->max_uV / 1000);
 	}
 
 	if (!constraints->min_uV ||
 	    constraints->min_uV != constraints->max_uV) {
 		ret = _regulator_get_voltage(rdev);
 		if (ret > 0)
-			count += sprintf(buf + count, "at %d mV ", ret / 1000);
+			count += scnprintf(buf + count, len - count,
+					   "at %d mV ", ret / 1000);
 	}
 
 	if (constraints->uV_offset)
-		count += sprintf(buf, "%dmV offset ",
-				 constraints->uV_offset / 1000);
+		count += scnprintf(buf + count, len - count, "%dmV offset ",
+				   constraints->uV_offset / 1000);
 
 	if (constraints->min_uA && constraints->max_uA) {
 		if (constraints->min_uA == constraints->max_uA)
-			count += sprintf(buf + count, "%d mA ",
-					 constraints->min_uA / 1000);
+			count += scnprintf(buf + count, len - count, "%d mA ",
+					   constraints->min_uA / 1000);
 		else
-			count += sprintf(buf + count, "%d <--> %d mA ",
-					 constraints->min_uA / 1000,
-					 constraints->max_uA / 1000);
+			count += scnprintf(buf + count, len - count,
+					   "%d <--> %d mA ",
+					   constraints->min_uA / 1000,
+					   constraints->max_uA / 1000);
 	}
 
 	if (!constraints->min_uA ||
 	    constraints->min_uA != constraints->max_uA) {
 		ret = _regulator_get_current_limit(rdev);
 		if (ret > 0)
-			count += sprintf(buf + count, "at %d mA ", ret / 1000);
+			count += scnprintf(buf + count, len - count,
+					   "at %d mA ", ret / 1000);
 	}
 
 	if (constraints->valid_modes_mask & REGULATOR_MODE_FAST)
-		count += sprintf(buf + count, "fast ");
+		count += scnprintf(buf + count, len - count, "fast ");
 	if (constraints->valid_modes_mask & REGULATOR_MODE_NORMAL)
-		count += sprintf(buf + count, "normal ");
+		count += scnprintf(buf + count, len - count, "normal ");
 	if (constraints->valid_modes_mask & REGULATOR_MODE_IDLE)
-		count += sprintf(buf + count, "idle ");
+		count += scnprintf(buf + count, len - count, "idle ");
 	if (constraints->valid_modes_mask & REGULATOR_MODE_STANDBY)
-		count += sprintf(buf + count, "standby");
+		count += scnprintf(buf + count, len - count, "standby");
 
 	if (!count)
-		sprintf(buf, "no parameters");
+		scnprintf(buf, len, "no parameters");
 
 	rdev_dbg(rdev, "%s\n", buf);
 
@@ -1006,6 +1063,15 @@ static int set_machine_constraints(struct regulator_dev *rdev,
 	if (ret != 0)
 		goto out;
 
+	if (rdev->constraints->ilim_uA && ops->set_input_current_limit) {
+		ret = ops->set_input_current_limit(rdev,
+						   rdev->constraints->ilim_uA);
+		if (ret < 0) {
+			rdev_err(rdev, "failed to set input limit\n");
+			goto out;
+		}
+	}
+
 	/* do we need to setup our suspend state */
 	if (rdev->constraints->initial_state) {
 		ret = suspend_prepare(rdev, rdev->constraints->initial_state);
@@ -1049,6 +1115,31 @@ static int set_machine_constraints(struct regulator_dev *rdev,
 		}
 	}
 
+	if (rdev->constraints->pull_down && ops->set_pull_down) {
+		ret = ops->set_pull_down(rdev);
+		if (ret < 0) {
+			rdev_err(rdev, "failed to set pull down\n");
+			goto out;
+		}
+	}
+
+	if (rdev->constraints->soft_start && ops->set_soft_start) {
+		ret = ops->set_soft_start(rdev);
+		if (ret < 0) {
+			rdev_err(rdev, "failed to set soft start\n");
+			goto out;
+		}
+	}
+
+	if (rdev->constraints->over_current_protection
+		&& ops->set_over_current_protection) {
+		ret = ops->set_over_current_protection(rdev);
+		if (ret < 0) {
+			rdev_err(rdev, "failed to set over current protection\n");
+			goto out;
+		}
+	}
+
 	print_constraints(rdev);
 	return 0;
 out:
@@ -1073,6 +1164,9 @@ static int set_supply(struct regulator_dev *rdev,
 
 	rdev_info(rdev, "supplied by %s\n", rdev_get_name(supply_rdev));
 
+	if (!try_module_get(supply_rdev->owner))
+		return -ENODEV;
+
 	rdev->supply = create_regulator(supply_rdev, &rdev->dev, "SUPPLY");
 	if (rdev->supply == NULL) {
 		err = -ENOMEM;
@@ -1192,10 +1286,10 @@ static struct regulator *create_regulator(struct regulator_dev *rdev,
 		if (regulator->supply_name == NULL)
 			goto overflow_err;
 
-		err = sysfs_create_link(&rdev->dev.kobj, &dev->kobj,
+		err = sysfs_create_link_nowarn(&rdev->dev.kobj, &dev->kobj,
 					buf);
 		if (err) {
-			rdev_warn(rdev, "could not add device link %s err %d\n",
+			rdev_dbg(rdev, "could not add device link %s err %d\n",
 				  dev->kobj.name, err);
 			/* non-fatal */
 		}
@@ -1208,7 +1302,7 @@ static struct regulator *create_regulator(struct regulator_dev *rdev,
 	regulator->debugfs = debugfs_create_dir(regulator->supply_name,
 						rdev->debugfs);
 	if (!regulator->debugfs) {
-		rdev_warn(rdev, "Failed to create debugfs directory\n");
+		rdev_dbg(rdev, "Failed to create debugfs directory\n");
 	} else {
 		debugfs_create_u32("uA_load", 0444, regulator->debugfs,
 				   &regulator->uA_load);
@@ -1271,6 +1365,47 @@ static void regulator_supply_alias(struct device **dev, const char **supply)
 	}
 }
 
+static int of_node_match(struct device *dev, const void *data)
+{
+	return dev->of_node == data;
+}
+
+static struct regulator_dev *of_find_regulator_by_node(struct device_node *np)
+{
+	struct device *dev;
+
+	dev = class_find_device(&regulator_class, NULL, np, of_node_match);
+
+	return dev ? dev_to_rdev(dev) : NULL;
+}
+
+static int regulator_match(struct device *dev, const void *data)
+{
+	struct regulator_dev *r = dev_to_rdev(dev);
+
+	return strcmp(rdev_get_name(r), data) == 0;
+}
+
+static struct regulator_dev *regulator_lookup_by_name(const char *name)
+{
+	struct device *dev;
+
+	dev = class_find_device(&regulator_class, NULL, name, regulator_match);
+
+	return dev ? dev_to_rdev(dev) : NULL;
+}
+
+/**
+ * regulator_dev_lookup - lookup a regulator device.
+ * @dev: device for regulator "consumer".
+ * @supply: Supply name or regulator ID.
+ * @ret: 0 on success, -ENODEV if lookup fails permanently, -EPROBE_DEFER if
+ * lookup could succeed in the future.
+ *
+ * If successful, returns a struct regulator_dev that corresponds to the name
+ * @supply and with the embedded struct device refcount incremented by one,
+ * or NULL on failure. The refcount must be dropped by calling put_device().
+ */
 static struct regulator_dev *regulator_dev_lookup(struct device *dev,
 						  const char *supply,
 						  int *ret)
@@ -1286,10 +1421,9 @@ static struct regulator_dev *regulator_dev_lookup(struct device *dev,
 	if (dev && dev->of_node) {
 		node = of_get_regulator(dev, supply);
 		if (node) {
-			list_for_each_entry(r, &regulator_list, list)
-				if (r->dev.parent &&
-					node == r->dev.of_node)
-					return r;
+			r = of_find_regulator_by_node(node);
+			if (r)
+				return r;
 			*ret = -EPROBE_DEFER;
 			return NULL;
 		} else {
@@ -1307,20 +1441,24 @@ static struct regulator_dev *regulator_dev_lookup(struct device *dev,
 	if (dev)
 		devname = dev_name(dev);
 
-	list_for_each_entry(r, &regulator_list, list)
-		if (strcmp(rdev_get_name(r), supply) == 0)
-			return r;
+	r = regulator_lookup_by_name(supply);
+	if (r)
+		return r;
 
+	mutex_lock(&regulator_list_mutex);
 	list_for_each_entry(map, &regulator_map_list, list) {
 		/* If the mapping has a device set up it must match */
 		if (map->dev_name &&
 		    (!devname || strcmp(map->dev_name, devname)))
 			continue;
 
-		if (strcmp(map->supply, supply) == 0)
+		if (strcmp(map->supply, supply) == 0 &&
+		    get_device(&map->regulator->dev)) {
+			mutex_unlock(&regulator_list_mutex);
 			return map->regulator;
+		}
 	}
-
+	mutex_unlock(&regulator_list_mutex);
 
 	return NULL;
 }
@@ -1340,34 +1478,49 @@ static int regulator_resolve_supply(struct regulator_dev *rdev)
 		return 0;
 
 	r = regulator_dev_lookup(dev, rdev->supply_name, &ret);
-	if (ret == -ENODEV) {
-		/*
-		 * No supply was specified for this regulator and
-		 * there will never be one.
-		 */
-		return 0;
-	}
-
 	if (!r) {
-		dev_err(dev, "Failed to resolve %s-supply for %s\n",
-			rdev->supply_name, rdev->desc->name);
-		return -EPROBE_DEFER;
+		if (ret == -ENODEV) {
+			/*
+			 * No supply was specified for this regulator and
+			 * there will never be one.
+			 */
+			return 0;
+		}
+
+		/* Did the lookup explicitly defer for us? */
+		if (ret == -EPROBE_DEFER)
+			return ret;
+
+		if (have_full_constraints()) {
+			r = dummy_regulator_rdev;
+			get_device(&r->dev);
+		} else {
+			dev_err(dev, "Failed to resolve %s-supply for %s\n",
+				rdev->supply_name, rdev->desc->name);
+			return -EPROBE_DEFER;
+		}
 	}
 
 	/* Recursively resolve the supply of the supply */
 	ret = regulator_resolve_supply(r);
-	if (ret < 0)
+	if (ret < 0) {
+		put_device(&r->dev);
 		return ret;
+	}
 
 	ret = set_supply(rdev, r);
-	if (ret < 0)
+	if (ret < 0) {
+		put_device(&r->dev);
 		return ret;
+	}
 
 	/* Cascade always-on state to supply */
-	if (_regulator_is_enabled(rdev)) {
+	if (_regulator_is_enabled(rdev) && rdev->supply) {
 		ret = regulator_enable(rdev->supply);
-		if (ret < 0)
+		if (ret < 0) {
+			_regulator_put(rdev->supply);
 			return ret;
+		}
 	}
 
 	return 0;
@@ -1395,8 +1548,6 @@ static struct regulator *_regulator_get(struct device *dev, const char *id,
 	else
 		ret = -EPROBE_DEFER;
 
-	mutex_lock(&regulator_list_mutex);
-
 	rdev = regulator_dev_lookup(dev, id, &ret);
 	if (rdev)
 		goto found;
@@ -1408,7 +1559,7 @@ static struct regulator *_regulator_get(struct device *dev, const char *id,
 	 * succeed, so, quit with appropriate error value
 	 */
 	if (ret && ret != -ENODEV)
-		goto out;
+		return regulator;
 
 	if (!devname)
 		devname = "deviceless";
@@ -1422,40 +1573,46 @@ static struct regulator *_regulator_get(struct device *dev, const char *id,
 			devname, id);
 
 		rdev = dummy_regulator_rdev;
+		get_device(&rdev->dev);
 		goto found;
 	/* Don't log an error when called from regulator_get_optional() */
 	} else if (!have_full_constraints() || exclusive) {
 		dev_warn(dev, "dummy supplies not allowed\n");
 	}
 
-	mutex_unlock(&regulator_list_mutex);
 	return regulator;
 
 found:
 	if (rdev->exclusive) {
 		regulator = ERR_PTR(-EPERM);
-		goto out;
+		put_device(&rdev->dev);
+		return regulator;
 	}
 
 	if (exclusive && rdev->open_count) {
 		regulator = ERR_PTR(-EBUSY);
-		goto out;
+		put_device(&rdev->dev);
+		return regulator;
 	}
 
 	ret = regulator_resolve_supply(rdev);
 	if (ret < 0) {
 		regulator = ERR_PTR(ret);
-		goto out;
+		put_device(&rdev->dev);
+		return regulator;
 	}
 
-	if (!try_module_get(rdev->owner))
-		goto out;
+	if (!try_module_get(rdev->owner)) {
+		put_device(&rdev->dev);
+		return regulator;
+	}
 
 	regulator = create_regulator(rdev, dev, id);
 	if (regulator == NULL) {
 		regulator = ERR_PTR(-ENOMEM);
+		put_device(&rdev->dev);
 		module_put(rdev->owner);
-		goto out;
+		return regulator;
 	}
 
 	rdev->open_count++;
@@ -1469,9 +1626,6 @@ found:
 			rdev->use_count = 0;
 	}
 
-out:
-	mutex_unlock(&regulator_list_mutex);
-
 	return regulator;
 }
 
@@ -1552,9 +1706,11 @@ static void _regulator_put(struct regulator *regulator)
 {
 	struct regulator_dev *rdev;
 
-	if (regulator == NULL || IS_ERR(regulator))
+	if (IS_ERR_OR_NULL(regulator))
 		return;
 
+	lockdep_assert_held_once(&regulator_list_mutex);
+
 	rdev = regulator->rdev;
 
 	debugfs_remove_recursive(regulator->debugfs);
@@ -1563,14 +1719,16 @@ static void _regulator_put(struct regulator *regulator)
 	if (regulator->dev)
 		sysfs_remove_link(&rdev->dev.kobj, regulator->supply_name);
 	mutex_lock(&rdev->mutex);
-	kfree(regulator->supply_name);
 	list_del(&regulator->list);
-	kfree(regulator);
 
 	rdev->open_count--;
 	rdev->exclusive = 0;
+	put_device(&rdev->dev);
 	mutex_unlock(&rdev->mutex);
 
+	kfree(regulator->supply_name);
+	kfree(regulator);
+
 	module_put(rdev->owner);
 }
 
@@ -1933,6 +2091,8 @@ static int _regulator_enable(struct regulator_dev *rdev)
 {
 	int ret;
 
+	lockdep_assert_held_once(&rdev->mutex);
+
 	/* check voltage and requested load before enabling */
 	if (rdev->constraints &&
 	    (rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_DRMS))
@@ -2033,6 +2193,8 @@ static int _regulator_disable(struct regulator_dev *rdev)
 {
 	int ret = 0;
 
+	lockdep_assert_held_once(&rdev->mutex);
+
 	if (WARN(rdev->use_count <= 0,
 		 "unbalanced disables for %s\n", rdev_get_name(rdev)))
 		return -EIO;
@@ -2111,6 +2273,8 @@ static int _regulator_force_disable(struct regulator_dev *rdev)
 {
 	int ret = 0;
 
+	lockdep_assert_held_once(&rdev->mutex);
+
 	ret = _notifier_call_chain(rdev, REGULATOR_EVENT_FORCE_DISABLE |
 			REGULATOR_EVENT_PRE_DISABLE, NULL);
 	if (ret & NOTIFY_STOP_MASK)
@@ -2239,6 +2403,40 @@ static int _regulator_is_enabled(struct regulator_dev *rdev)
 	return rdev->desc->ops->is_enabled(rdev);
 }
 
+static int _regulator_list_voltage(struct regulator *regulator,
+				    unsigned selector, int lock)
+{
+	struct regulator_dev *rdev = regulator->rdev;
+	const struct regulator_ops *ops = rdev->desc->ops;
+	int ret;
+
+	if (rdev->desc->fixed_uV && rdev->desc->n_voltages == 1 && !selector)
+		return rdev->desc->fixed_uV;
+
+	if (ops->list_voltage) {
+		if (selector >= rdev->desc->n_voltages)
+			return -EINVAL;
+		if (lock)
+			mutex_lock(&rdev->mutex);
+		ret = ops->list_voltage(rdev, selector);
+		if (lock)
+			mutex_unlock(&rdev->mutex);
+	} else if (rdev->supply) {
+		ret = _regulator_list_voltage(rdev->supply, selector, lock);
+	} else {
+		return -EINVAL;
+	}
+
+	if (ret > 0) {
+		if (ret < rdev->constraints->min_uV)
+			ret = 0;
+		else if (ret > rdev->constraints->max_uV)
+			ret = 0;
+	}
+
+	return ret;
+}
+
 /**
  * regulator_is_enabled - is the regulator output enabled
  * @regulator: regulator source
@@ -2328,33 +2526,7 @@ EXPORT_SYMBOL_GPL(regulator_count_voltages);
  */
 int regulator_list_voltage(struct regulator *regulator, unsigned selector)
 {
-	struct regulator_dev *rdev = regulator->rdev;
-	const struct regulator_ops *ops = rdev->desc->ops;
-	int ret;
-
-	if (rdev->desc->fixed_uV && rdev->desc->n_voltages == 1 && !selector)
-		return rdev->desc->fixed_uV;
-
-	if (ops->list_voltage) {
-		if (selector >= rdev->desc->n_voltages)
-			return -EINVAL;
-		mutex_lock(&rdev->mutex);
-		ret = ops->list_voltage(rdev, selector);
-		mutex_unlock(&rdev->mutex);
-	} else if (rdev->supply) {
-		ret = regulator_list_voltage(rdev->supply, selector);
-	} else {
-		return -EINVAL;
-	}
-
-	if (ret > 0) {
-		if (ret < rdev->constraints->min_uV)
-			ret = 0;
-		else if (ret > rdev->constraints->max_uV)
-			ret = 0;
-	}
-
-	return ret;
+	return _regulator_list_voltage(regulator, selector, 1);
 }
 EXPORT_SYMBOL_GPL(regulator_list_voltage);
 
@@ -2489,6 +2661,23 @@ int regulator_is_supported_voltage(struct regulator *regulator,
 }
 EXPORT_SYMBOL_GPL(regulator_is_supported_voltage);
 
+static int regulator_map_voltage(struct regulator_dev *rdev, int min_uV,
+				 int max_uV)
+{
+	const struct regulator_desc *desc = rdev->desc;
+
+	if (desc->ops->map_voltage)
+		return desc->ops->map_voltage(rdev, min_uV, max_uV);
+
+	if (desc->ops->list_voltage == regulator_list_voltage_linear)
+		return regulator_map_voltage_linear(rdev, min_uV, max_uV);
+
+	if (desc->ops->list_voltage == regulator_list_voltage_linear_range)
+		return regulator_map_voltage_linear_range(rdev, min_uV, max_uV);
+
+	return regulator_map_voltage_iterate(rdev, min_uV, max_uV);
+}
+
 static int _regulator_call_set_voltage(struct regulator_dev *rdev,
 				       int min_uV, int max_uV,
 				       unsigned *selector)
@@ -2577,23 +2766,7 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev,
 		}
 
 	} else if (rdev->desc->ops->set_voltage_sel) {
-		if (rdev->desc->ops->map_voltage) {
-			ret = rdev->desc->ops->map_voltage(rdev, min_uV,
-							   max_uV);
-		} else {
-			if (rdev->desc->ops->list_voltage ==
-			    regulator_list_voltage_linear)
-				ret = regulator_map_voltage_linear(rdev,
-								min_uV, max_uV);
-			else if (rdev->desc->ops->list_voltage ==
-				 regulator_list_voltage_linear_range)
-				ret = regulator_map_voltage_linear_range(rdev,
-								min_uV, max_uV);
-			else
-				ret = regulator_map_voltage_iterate(rdev,
-								min_uV, max_uV);
-		}
-
+		ret = regulator_map_voltage(rdev, min_uV, max_uV);
 		if (ret >= 0) {
 			best_val = rdev->desc->ops->list_voltage(rdev, ret);
 			if (min_uV <= best_val && max_uV >= best_val) {
@@ -2644,32 +2817,15 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev,
 	return ret;
 }
 
-/**
- * regulator_set_voltage - set regulator output voltage
- * @regulator: regulator source
- * @min_uV: Minimum required voltage in uV
- * @max_uV: Maximum acceptable voltage in uV
- *
- * Sets a voltage regulator to the desired output voltage. This can be set
- * during any regulator state. IOW, regulator can be disabled or enabled.
- *
- * If the regulator is enabled then the voltage will change to the new value
- * immediately otherwise if the regulator is disabled the regulator will
- * output at the new voltage when enabled.
- *
- * NOTE: If the regulator is shared between several devices then the lowest
- * request voltage that meets the system constraints will be used.
- * Regulator system constraints must be set for this regulator before
- * calling this function otherwise this call will fail.
- */
-int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV)
+static int regulator_set_voltage_unlocked(struct regulator *regulator,
+					  int min_uV, int max_uV)
 {
 	struct regulator_dev *rdev = regulator->rdev;
 	int ret = 0;
 	int old_min_uV, old_max_uV;
 	int current_uV;
-
-	mutex_lock(&rdev->mutex);
+	int best_supply_uV = 0;
+	int supply_change_uV = 0;
 
 	/* If we're setting the same range as last time the change
 	 * should be a noop (some cpufreq implementations use the same
@@ -2679,7 +2835,7 @@ int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV)
 		goto out;
 
 	/* If we're trying to set a range that overlaps the current voltage,
-	 * return succesfully even though the regulator does not support
+	 * return successfully even though the regulator does not support
 	 * changing the voltage.
 	 */
 	if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) {
@@ -2713,17 +2869,95 @@ int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV)
 	if (ret < 0)
 		goto out2;
 
+	if (rdev->supply && (rdev->desc->min_dropout_uV ||
+				!rdev->desc->ops->get_voltage)) {
+		int current_supply_uV;
+		int selector;
+
+		selector = regulator_map_voltage(rdev, min_uV, max_uV);
+		if (selector < 0) {
+			ret = selector;
+			goto out2;
+		}
+
+		best_supply_uV = _regulator_list_voltage(regulator, selector, 0);
+		if (best_supply_uV < 0) {
+			ret = best_supply_uV;
+			goto out2;
+		}
+
+		best_supply_uV += rdev->desc->min_dropout_uV;
+
+		current_supply_uV = _regulator_get_voltage(rdev->supply->rdev);
+		if (current_supply_uV < 0) {
+			ret = current_supply_uV;
+			goto out2;
+		}
+
+		supply_change_uV = best_supply_uV - current_supply_uV;
+	}
+
+	if (supply_change_uV > 0) {
+		ret = regulator_set_voltage_unlocked(rdev->supply,
+				best_supply_uV, INT_MAX);
+		if (ret) {
+			dev_err(&rdev->dev, "Failed to increase supply voltage: %d\n",
+					ret);
+			goto out2;
+		}
+	}
+
 	ret = _regulator_do_set_voltage(rdev, min_uV, max_uV);
 	if (ret < 0)
 		goto out2;
 
+	if (supply_change_uV < 0) {
+		ret = regulator_set_voltage_unlocked(rdev->supply,
+				best_supply_uV, INT_MAX);
+		if (ret)
+			dev_warn(&rdev->dev, "Failed to decrease supply voltage: %d\n",
+					ret);
+		/* No need to fail here */
+		ret = 0;
+	}
+
 out:
-	mutex_unlock(&rdev->mutex);
 	return ret;
 out2:
 	regulator->min_uV = old_min_uV;
 	regulator->max_uV = old_max_uV;
-	mutex_unlock(&rdev->mutex);
+
+	return ret;
+}
+
+/**
+ * regulator_set_voltage - set regulator output voltage
+ * @regulator: regulator source
+ * @min_uV: Minimum required voltage in uV
+ * @max_uV: Maximum acceptable voltage in uV
+ *
+ * Sets a voltage regulator to the desired output voltage. This can be set
+ * during any regulator state. IOW, regulator can be disabled or enabled.
+ *
+ * If the regulator is enabled then the voltage will change to the new value
+ * immediately otherwise if the regulator is disabled the regulator will
+ * output at the new voltage when enabled.
+ *
+ * NOTE: If the regulator is shared between several devices then the lowest
+ * request voltage that meets the system constraints will be used.
+ * Regulator system constraints must be set for this regulator before
+ * calling this function otherwise this call will fail.
+ */
+int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV)
+{
+	int ret = 0;
+
+	regulator_lock_supply(regulator->rdev);
+
+	ret = regulator_set_voltage_unlocked(regulator, min_uV, max_uV);
+
+	regulator_unlock_supply(regulator->rdev);
+
 	return ret;
 }
 EXPORT_SYMBOL_GPL(regulator_set_voltage);
@@ -2876,7 +3110,7 @@ static int _regulator_get_voltage(struct regulator_dev *rdev)
 	} else if (rdev->desc->fixed_uV && (rdev->desc->n_voltages == 1)) {
 		ret = rdev->desc->fixed_uV;
 	} else if (rdev->supply) {
-		ret = regulator_get_voltage(rdev->supply);
+		ret = _regulator_get_voltage(rdev->supply->rdev);
 	} else {
 		return -EINVAL;
 	}
@@ -2899,11 +3133,11 @@ int regulator_get_voltage(struct regulator *regulator)
 {
 	int ret;
 
-	mutex_lock(&regulator->rdev->mutex);
+	regulator_lock_supply(regulator->rdev);
 
 	ret = _regulator_get_voltage(regulator->rdev);
 
-	mutex_unlock(&regulator->rdev->mutex);
+	regulator_unlock_supply(regulator->rdev);
 
 	return ret;
 }
@@ -3407,6 +3641,8 @@ EXPORT_SYMBOL_GPL(regulator_bulk_free);
 int regulator_notifier_call_chain(struct regulator_dev *rdev,
 				  unsigned long event, void *data)
 {
+	lockdep_assert_held_once(&rdev->mutex);
+
 	_notifier_call_chain(rdev, event, data);
 	return NOTIFY_DONE;
 
@@ -3551,6 +3787,9 @@ static const struct attribute_group *regulator_dev_groups[] = {
 static void regulator_dev_release(struct device *dev)
 {
 	struct regulator_dev *rdev = dev_get_drvdata(dev);
+
+	kfree(rdev->constraints);
+	of_node_put(rdev->dev.of_node);
 	kfree(rdev);
 }
 
@@ -3732,8 +3971,6 @@ regulator_register(const struct regulator_desc *regulator_desc,
 		}
 	}
 
-	list_add(&rdev->list, &regulator_list);
-
 	rdev_init_debugfs(rdev);
 out:
 	mutex_unlock(&regulator_list_mutex);
@@ -3781,14 +4018,25 @@ void regulator_unregister(struct regulator_dev *rdev)
 	WARN_ON(rdev->open_count);
 	unset_regulator_supplies(rdev);
 	list_del(&rdev->list);
-	kfree(rdev->constraints);
+	mutex_unlock(&regulator_list_mutex);
 	regulator_ena_gpio_free(rdev);
-	of_node_put(rdev->dev.of_node);
 	device_unregister(&rdev->dev);
-	mutex_unlock(&regulator_list_mutex);
 }
 EXPORT_SYMBOL_GPL(regulator_unregister);
 
+static int _regulator_suspend_prepare(struct device *dev, void *data)
+{
+	struct regulator_dev *rdev = dev_to_rdev(dev);
+	const suspend_state_t *state = data;
+	int ret;
+
+	mutex_lock(&rdev->mutex);
+	ret = suspend_prepare(rdev, *state);
+	mutex_unlock(&rdev->mutex);
+
+	return ret;
+}
+
 /**
  * regulator_suspend_prepare - prepare regulators for system wide suspend
  * @state: system suspend state
@@ -3798,30 +4046,45 @@ EXPORT_SYMBOL_GPL(regulator_unregister);
  */
 int regulator_suspend_prepare(suspend_state_t state)
 {
-	struct regulator_dev *rdev;
-	int ret = 0;
-
 	/* ON is handled by regulator active state */
 	if (state == PM_SUSPEND_ON)
 		return -EINVAL;
 
-	mutex_lock(&regulator_list_mutex);
-	list_for_each_entry(rdev, &regulator_list, list) {
+	return class_for_each_device(&regulator_class, NULL, &state,
+				     _regulator_suspend_prepare);
+}
+EXPORT_SYMBOL_GPL(regulator_suspend_prepare);
 
-		mutex_lock(&rdev->mutex);
-		ret = suspend_prepare(rdev, state);
-		mutex_unlock(&rdev->mutex);
+static int _regulator_suspend_finish(struct device *dev, void *data)
+{
+	struct regulator_dev *rdev = dev_to_rdev(dev);
+	int ret;
 
-		if (ret < 0) {
-			rdev_err(rdev, "failed to prepare\n");
-			goto out;
+	mutex_lock(&rdev->mutex);
+	if (rdev->use_count > 0  || rdev->constraints->always_on) {
+		if (!_regulator_is_enabled(rdev)) {
+			ret = _regulator_do_enable(rdev);
+			if (ret)
+				dev_err(dev,
+					"Failed to resume regulator %d\n",
+					ret);
 		}
+	} else {
+		if (!have_full_constraints())
+			goto unlock;
+		if (!_regulator_is_enabled(rdev))
+			goto unlock;
+
+		ret = _regulator_do_disable(rdev);
+		if (ret)
+			dev_err(dev, "Failed to suspend regulator %d\n", ret);
 	}
-out:
-	mutex_unlock(&regulator_list_mutex);
-	return ret;
+unlock:
+	mutex_unlock(&rdev->mutex);
+
+	/* Keep processing regulators in spite of any errors */
+	return 0;
 }
-EXPORT_SYMBOL_GPL(regulator_suspend_prepare);
 
 /**
  * regulator_suspend_finish - resume regulators from system wide suspend
@@ -3831,33 +4094,8 @@ EXPORT_SYMBOL_GPL(regulator_suspend_prepare);
  */
 int regulator_suspend_finish(void)
 {
-	struct regulator_dev *rdev;
-	int ret = 0, error;
-
-	mutex_lock(&regulator_list_mutex);
-	list_for_each_entry(rdev, &regulator_list, list) {
-		mutex_lock(&rdev->mutex);
-		if (rdev->use_count > 0  || rdev->constraints->always_on) {
-			if (!_regulator_is_enabled(rdev)) {
-				error = _regulator_do_enable(rdev);
-				if (error)
-					ret = error;
-			}
-		} else {
-			if (!have_full_constraints())
-				goto unlock;
-			if (!_regulator_is_enabled(rdev))
-				goto unlock;
-
-			error = _regulator_do_disable(rdev);
-			if (error)
-				ret = error;
-		}
-unlock:
-		mutex_unlock(&rdev->mutex);
-	}
-	mutex_unlock(&regulator_list_mutex);
-	return ret;
+	return class_for_each_device(&regulator_class, NULL, NULL,
+				     _regulator_suspend_finish);
 }
 EXPORT_SYMBOL_GPL(regulator_suspend_finish);
 
@@ -3977,14 +4215,35 @@ static const struct file_operations supply_map_fops = {
 };
 
 #ifdef CONFIG_DEBUG_FS
+struct summary_data {
+	struct seq_file *s;
+	struct regulator_dev *parent;
+	int level;
+};
+
+static void regulator_summary_show_subtree(struct seq_file *s,
+					   struct regulator_dev *rdev,
+					   int level);
+
+static int regulator_summary_show_children(struct device *dev, void *data)
+{
+	struct regulator_dev *rdev = dev_to_rdev(dev);
+	struct summary_data *summary_data = data;
+
+	if (rdev->supply && rdev->supply->rdev == summary_data->parent)
+		regulator_summary_show_subtree(summary_data->s, rdev,
+					       summary_data->level + 1);
+
+	return 0;
+}
+
 static void regulator_summary_show_subtree(struct seq_file *s,
 					   struct regulator_dev *rdev,
 					   int level)
 {
-	struct list_head *list = s->private;
-	struct regulator_dev *child;
 	struct regulation_constraints *c;
 	struct regulator *consumer;
+	struct summary_data summary_data;
 
 	if (!rdev)
 		return;
@@ -4034,33 +4293,32 @@ static void regulator_summary_show_subtree(struct seq_file *s,
 		seq_puts(s, "\n");
 	}
 
-	list_for_each_entry(child, list, list) {
-		/* handle only non-root regulators supplied by current rdev */
-		if (!child->supply || child->supply->rdev != rdev)
-			continue;
+	summary_data.s = s;
+	summary_data.level = level;
+	summary_data.parent = rdev;
 
-		regulator_summary_show_subtree(s, child, level + 1);
-	}
+	class_for_each_device(&regulator_class, NULL, &summary_data,
+			      regulator_summary_show_children);
 }
 
-static int regulator_summary_show(struct seq_file *s, void *data)
+static int regulator_summary_show_roots(struct device *dev, void *data)
 {
-	struct list_head *list = s->private;
-	struct regulator_dev *rdev;
+	struct regulator_dev *rdev = dev_to_rdev(dev);
+	struct seq_file *s = data;
 
-	seq_puts(s, " regulator                      use open bypass voltage current     min     max\n");
-	seq_puts(s, "-------------------------------------------------------------------------------\n");
-
-	mutex_lock(&regulator_list_mutex);
+	if (!rdev->supply)
+		regulator_summary_show_subtree(s, rdev, 0);
 
-	list_for_each_entry(rdev, list, list) {
-		if (rdev->supply)
-			continue;
+	return 0;
+}
 
-		regulator_summary_show_subtree(s, rdev, 0);
-	}
+static int regulator_summary_show(struct seq_file *s, void *data)
+{
+	seq_puts(s, " regulator                      use open bypass voltage current     min     max\n");
+	seq_puts(s, "-------------------------------------------------------------------------------\n");
 
-	mutex_unlock(&regulator_list_mutex);
+	class_for_each_device(&regulator_class, NULL, s,
+			      regulator_summary_show_roots);
 
 	return 0;
 }
@@ -4094,7 +4352,7 @@ static int __init regulator_init(void)
 			    &supply_map_fops);
 
 	debugfs_create_file("regulator_summary", 0444, debugfs_root,
-			    &regulator_list, &regulator_summary_fops);
+			    NULL, &regulator_summary_fops);
 
 	regulator_dummy_init();
 
@@ -4104,13 +4362,57 @@ static int __init regulator_init(void)
 /* init early to allow our consumers to complete system booting */
 core_initcall(regulator_init);
 
-static int __init regulator_init_complete(void)
+static int __init regulator_late_cleanup(struct device *dev, void *data)
 {
-	struct regulator_dev *rdev;
-	const struct regulator_ops *ops;
-	struct regulation_constraints *c;
+	struct regulator_dev *rdev = dev_to_rdev(dev);
+	const struct regulator_ops *ops = rdev->desc->ops;
+	struct regulation_constraints *c = rdev->constraints;
 	int enabled, ret;
 
+	if (c && c->always_on)
+		return 0;
+
+	if (c && !(c->valid_ops_mask & REGULATOR_CHANGE_STATUS))
+		return 0;
+
+	mutex_lock(&rdev->mutex);
+
+	if (rdev->use_count)
+		goto unlock;
+
+	/* If we can't read the status assume it's on. */
+	if (ops->is_enabled)
+		enabled = ops->is_enabled(rdev);
+	else
+		enabled = 1;
+
+	if (!enabled)
+		goto unlock;
+
+	if (have_full_constraints()) {
+		/* We log since this may kill the system if it goes
+		 * wrong. */
+		rdev_info(rdev, "disabling\n");
+		ret = _regulator_do_disable(rdev);
+		if (ret != 0)
+			rdev_err(rdev, "couldn't disable: %d\n", ret);
+	} else {
+		/* The intention is that in future we will
+		 * assume that full constraints are provided
+		 * so warn even if we aren't going to do
+		 * anything here.
+		 */
+		rdev_warn(rdev, "incomplete constraints, leaving on\n");
+	}
+
+unlock:
+	mutex_unlock(&rdev->mutex);
+
+	return 0;
+}
+
+static int __init regulator_init_complete(void)
+{
 	/*
 	 * Since DT doesn't provide an idiomatic mechanism for
 	 * enabling full constraints and since it's much more natural
@@ -4120,58 +4422,13 @@ static int __init regulator_init_complete(void)
 	if (of_have_populated_dt())
 		has_full_constraints = true;
 
-	mutex_lock(&regulator_list_mutex);
-
 	/* If we have a full configuration then disable any regulators
 	 * we have permission to change the status for and which are
 	 * not in use or always_on.  This is effectively the default
 	 * for DT and ACPI as they have full constraints.
 	 */
-	list_for_each_entry(rdev, &regulator_list, list) {
-		ops = rdev->desc->ops;
-		c = rdev->constraints;
-
-		if (c && c->always_on)
-			continue;
-
-		if (c && !(c->valid_ops_mask & REGULATOR_CHANGE_STATUS))
-			continue;
-
-		mutex_lock(&rdev->mutex);
-
-		if (rdev->use_count)
-			goto unlock;
-
-		/* If we can't read the status assume it's on. */
-		if (ops->is_enabled)
-			enabled = ops->is_enabled(rdev);
-		else
-			enabled = 1;
-
-		if (!enabled)
-			goto unlock;
-
-		if (have_full_constraints()) {
-			/* We log since this may kill the system if it
-			 * goes wrong. */
-			rdev_info(rdev, "disabling\n");
-			ret = _regulator_do_disable(rdev);
-			if (ret != 0)
-				rdev_err(rdev, "couldn't disable: %d\n", ret);
-		} else {
-			/* The intention is that in future we will
-			 * assume that full constraints are provided
-			 * so warn even if we aren't going to do
-			 * anything here.
-			 */
-			rdev_warn(rdev, "incomplete constraints, leaving on\n");
-		}
-
-unlock:
-		mutex_unlock(&rdev->mutex);
-	}
-
-	mutex_unlock(&regulator_list_mutex);
+	class_for_each_device(&regulator_class, NULL, NULL,
+			      regulator_late_cleanup);
 
 	return 0;
 }
diff --git a/kernel/drivers/regulator/da9052-regulator.c b/kernel/drivers/regulator/da9052-regulator.c
index e628d4c2f..12a25b40e 100644
--- a/kernel/drivers/regulator/da9052-regulator.c
+++ b/kernel/drivers/regulator/da9052-regulator.c
@@ -381,6 +381,7 @@ static inline struct da9052_regulator_info *find_regulator_info(u8 chip_id,
 	case DA9053_AA:
 	case DA9053_BA:
 	case DA9053_BB:
+	case DA9053_BC:
 		for (i = 0; i < ARRAY_SIZE(da9053_regulator_info); i++) {
 			info = &da9053_regulator_info[i];
 			if (info->reg_desc.id == id)
diff --git a/kernel/drivers/regulator/da9062-regulator.c b/kernel/drivers/regulator/da9062-regulator.c
new file mode 100644
index 000000000..5638fe8d7
--- /dev/null
+++ b/kernel/drivers/regulator/da9062-regulator.c
@@ -0,0 +1,841 @@
+/*
+ * da9062-regulator.c - REGULATOR device driver for DA9062
+ * Copyright (C) 2015  Dialog Semiconductor Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/mfd/da9062/core.h>
+#include <linux/mfd/da9062/registers.h>
+
+/* Regulator IDs */
+enum {
+	DA9062_ID_BUCK1,
+	DA9062_ID_BUCK2,
+	DA9062_ID_BUCK3,
+	DA9062_ID_BUCK4,
+	DA9062_ID_LDO1,
+	DA9062_ID_LDO2,
+	DA9062_ID_LDO3,
+	DA9062_ID_LDO4,
+	DA9062_MAX_REGULATORS,
+};
+
+/* Regulator capabilities and registers description */
+struct da9062_regulator_info {
+	struct regulator_desc desc;
+	/* Current limiting */
+	unsigned int n_current_limits;
+	const int *current_limits;
+	/* Main register fields */
+	struct reg_field mode;
+	struct reg_field suspend;
+	struct reg_field sleep;
+	struct reg_field suspend_sleep;
+	unsigned int suspend_vsel_reg;
+	struct reg_field ilimit;
+	/* Event detection bit */
+	struct reg_field oc_event;
+};
+
+/* Single regulator settings */
+struct da9062_regulator {
+	struct regulator_desc			desc;
+	struct regulator_dev			*rdev;
+	struct da9062				*hw;
+	const struct da9062_regulator_info	*info;
+
+	struct regmap_field			*mode;
+	struct regmap_field			*suspend;
+	struct regmap_field			*sleep;
+	struct regmap_field			*suspend_sleep;
+	struct regmap_field			*ilimit;
+};
+
+/* Encapsulates all information for the regulators driver */
+struct da9062_regulators {
+	int					irq_ldo_lim;
+	unsigned				n_regulators;
+	/* Array size to be defined during init. Keep at end. */
+	struct da9062_regulator			regulator[0];
+};
+
+/* BUCK modes */
+enum {
+	BUCK_MODE_MANUAL,	/* 0 */
+	BUCK_MODE_SLEEP,	/* 1 */
+	BUCK_MODE_SYNC,		/* 2 */
+	BUCK_MODE_AUTO		/* 3 */
+};
+
+/* Regulator operations */
+
+/* Current limits array (in uA) BUCK1 and BUCK3.
+   Entry indexes corresponds to register values. */
+static const int da9062_buck_a_limits[] = {
+	 500000,  600000,  700000,  800000,  900000, 1000000, 1100000, 1200000,
+	1300000, 1400000, 1500000, 1600000, 1700000, 1800000, 1900000, 2000000
+};
+
+/* Current limits array (in uA) for BUCK2.
+   Entry indexes corresponds to register values. */
+static const int da9062_buck_b_limits[] = {
+	1500000, 1600000, 1700000, 1800000, 1900000, 2000000, 2100000, 2200000,
+	2300000, 2400000, 2500000, 2600000, 2700000, 2800000, 2900000, 3000000
+};
+
+static int da9062_set_current_limit(struct regulator_dev *rdev,
+				    int min_ua, int max_ua)
+{
+	struct da9062_regulator *regl = rdev_get_drvdata(rdev);
+	const struct da9062_regulator_info *rinfo = regl->info;
+	int n, tval;
+
+	for (n = 0; n < rinfo->n_current_limits; n++) {
+		tval = rinfo->current_limits[n];
+		if (tval >= min_ua && tval <= max_ua)
+			return regmap_field_write(regl->ilimit, n);
+	}
+
+	return -EINVAL;
+}
+
+static int da9062_get_current_limit(struct regulator_dev *rdev)
+{
+	struct da9062_regulator *regl = rdev_get_drvdata(rdev);
+	const struct da9062_regulator_info *rinfo = regl->info;
+	unsigned int sel;
+	int ret;
+
+	ret = regmap_field_read(regl->ilimit, &sel);
+	if (ret < 0)
+		return ret;
+
+	if (sel >= rinfo->n_current_limits)
+		sel = rinfo->n_current_limits - 1;
+
+	return rinfo->current_limits[sel];
+}
+
+static int da9062_buck_set_mode(struct regulator_dev *rdev, unsigned mode)
+{
+	struct da9062_regulator *regl = rdev_get_drvdata(rdev);
+	unsigned val;
+
+	switch (mode) {
+	case REGULATOR_MODE_FAST:
+		val = BUCK_MODE_SYNC;
+		break;
+	case REGULATOR_MODE_NORMAL:
+		val = BUCK_MODE_AUTO;
+		break;
+	case REGULATOR_MODE_STANDBY:
+		val = BUCK_MODE_SLEEP;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return regmap_field_write(regl->mode, val);
+}
+
+/*
+ * Bucks use single mode register field for normal operation
+ * and suspend state.
+ * There are 3 modes to map to: FAST, NORMAL, and STANDBY.
+ */
+
+static unsigned da9062_buck_get_mode(struct regulator_dev *rdev)
+{
+	struct da9062_regulator *regl = rdev_get_drvdata(rdev);
+	struct regmap_field *field;
+	unsigned int val, mode = 0;
+	int ret;
+
+	ret = regmap_field_read(regl->mode, &val);
+	if (ret < 0)
+		return ret;
+
+	switch (val) {
+	default:
+	case BUCK_MODE_MANUAL:
+		mode = REGULATOR_MODE_FAST | REGULATOR_MODE_STANDBY;
+		/* Sleep flag bit decides the mode */
+		break;
+	case BUCK_MODE_SLEEP:
+		return REGULATOR_MODE_STANDBY;
+	case BUCK_MODE_SYNC:
+		return REGULATOR_MODE_FAST;
+	case BUCK_MODE_AUTO:
+		return REGULATOR_MODE_NORMAL;
+	}
+
+	/* Detect current regulator state */
+	ret = regmap_field_read(regl->suspend, &val);
+	if (ret < 0)
+		return 0;
+
+	/* Read regulator mode from proper register, depending on state */
+	if (val)
+		field = regl->suspend_sleep;
+	else
+		field = regl->sleep;
+
+	ret = regmap_field_read(field, &val);
+	if (ret < 0)
+		return 0;
+
+	if (val)
+		mode &= REGULATOR_MODE_STANDBY;
+	else
+		mode &= REGULATOR_MODE_NORMAL | REGULATOR_MODE_FAST;
+
+	return mode;
+}
+
+/*
+ * LDOs use sleep flags - one for normal and one for suspend state.
+ * There are 2 modes to map to: NORMAL and STANDBY (sleep) for each state.
+ */
+
+static int da9062_ldo_set_mode(struct regulator_dev *rdev, unsigned mode)
+{
+	struct da9062_regulator *regl = rdev_get_drvdata(rdev);
+	unsigned val;
+
+	switch (mode) {
+	case REGULATOR_MODE_NORMAL:
+		val = 0;
+		break;
+	case REGULATOR_MODE_STANDBY:
+		val = 1;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return regmap_field_write(regl->sleep, val);
+}
+
+static unsigned da9062_ldo_get_mode(struct regulator_dev *rdev)
+{
+	struct da9062_regulator *regl = rdev_get_drvdata(rdev);
+	struct regmap_field *field;
+	int ret, val;
+
+	/* Detect current regulator state */
+	ret = regmap_field_read(regl->suspend, &val);
+	if (ret < 0)
+		return 0;
+
+	/* Read regulator mode from proper register, depending on state */
+	if (val)
+		field = regl->suspend_sleep;
+	else
+		field = regl->sleep;
+
+	ret = regmap_field_read(field, &val);
+	if (ret < 0)
+		return 0;
+
+	if (val)
+		return REGULATOR_MODE_STANDBY;
+	else
+		return REGULATOR_MODE_NORMAL;
+}
+
+static int da9062_buck_get_status(struct regulator_dev *rdev)
+{
+	int ret = regulator_is_enabled_regmap(rdev);
+
+	if (ret == 0) {
+		ret = REGULATOR_STATUS_OFF;
+	} else if (ret > 0) {
+		ret = da9062_buck_get_mode(rdev);
+		if (ret > 0)
+			ret = regulator_mode_to_status(ret);
+		else if (ret == 0)
+			ret = -EIO;
+	}
+
+	return ret;
+}
+
+static int da9062_ldo_get_status(struct regulator_dev *rdev)
+{
+	int ret = regulator_is_enabled_regmap(rdev);
+
+	if (ret == 0) {
+		ret = REGULATOR_STATUS_OFF;
+	} else if (ret > 0) {
+		ret = da9062_ldo_get_mode(rdev);
+		if (ret > 0)
+			ret = regulator_mode_to_status(ret);
+		else if (ret == 0)
+			ret = -EIO;
+	}
+
+	return ret;
+}
+
+static int da9062_set_suspend_voltage(struct regulator_dev *rdev, int uv)
+{
+	struct da9062_regulator *regl = rdev_get_drvdata(rdev);
+	const struct da9062_regulator_info *rinfo = regl->info;
+	int ret, sel;
+
+	sel = regulator_map_voltage_linear(rdev, uv, uv);
+	if (sel < 0)
+		return sel;
+
+	sel <<= ffs(rdev->desc->vsel_mask) - 1;
+
+	ret = regmap_update_bits(regl->hw->regmap, rinfo->suspend_vsel_reg,
+				 rdev->desc->vsel_mask, sel);
+
+	return ret;
+}
+
+static int da9062_suspend_enable(struct regulator_dev *rdev)
+{
+	struct da9062_regulator *regl = rdev_get_drvdata(rdev);
+
+	return regmap_field_write(regl->suspend, 1);
+}
+
+static int da9062_suspend_disable(struct regulator_dev *rdev)
+{
+	struct da9062_regulator *regl = rdev_get_drvdata(rdev);
+
+	return regmap_field_write(regl->suspend, 0);
+}
+
+static int da9062_buck_set_suspend_mode(struct regulator_dev *rdev,
+					unsigned mode)
+{
+	struct da9062_regulator *regl = rdev_get_drvdata(rdev);
+	int val;
+
+	switch (mode) {
+	case REGULATOR_MODE_FAST:
+		val = BUCK_MODE_SYNC;
+		break;
+	case REGULATOR_MODE_NORMAL:
+		val = BUCK_MODE_AUTO;
+		break;
+	case REGULATOR_MODE_STANDBY:
+		val = BUCK_MODE_SLEEP;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return regmap_field_write(regl->mode, val);
+}
+
+static int da9062_ldo_set_suspend_mode(struct regulator_dev *rdev,
+						unsigned mode)
+{
+	struct da9062_regulator *regl = rdev_get_drvdata(rdev);
+	unsigned val;
+
+	switch (mode) {
+	case REGULATOR_MODE_NORMAL:
+		val = 0;
+		break;
+	case REGULATOR_MODE_STANDBY:
+		val = 1;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return regmap_field_write(regl->suspend_sleep, val);
+}
+
+static struct regulator_ops da9062_buck_ops = {
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.is_enabled		= regulator_is_enabled_regmap,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+	.list_voltage		= regulator_list_voltage_linear,
+	.set_current_limit	= da9062_set_current_limit,
+	.get_current_limit	= da9062_get_current_limit,
+	.set_mode		= da9062_buck_set_mode,
+	.get_mode		= da9062_buck_get_mode,
+	.get_status		= da9062_buck_get_status,
+	.set_suspend_voltage	= da9062_set_suspend_voltage,
+	.set_suspend_enable	= da9062_suspend_enable,
+	.set_suspend_disable	= da9062_suspend_disable,
+	.set_suspend_mode	= da9062_buck_set_suspend_mode,
+};
+
+static struct regulator_ops da9062_ldo_ops = {
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.is_enabled		= regulator_is_enabled_regmap,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+	.list_voltage		= regulator_list_voltage_linear,
+	.set_mode		= da9062_ldo_set_mode,
+	.get_mode		= da9062_ldo_get_mode,
+	.get_status		= da9062_ldo_get_status,
+	.set_suspend_voltage	= da9062_set_suspend_voltage,
+	.set_suspend_enable	= da9062_suspend_enable,
+	.set_suspend_disable	= da9062_suspend_disable,
+	.set_suspend_mode	= da9062_ldo_set_suspend_mode,
+};
+
+/* Regulator information */
+static const struct da9062_regulator_info local_regulator_info[] = {
+	{
+		.desc.id = DA9062_ID_BUCK1,
+		.desc.name = "DA9062 BUCK1",
+		.desc.of_match = of_match_ptr("buck1"),
+		.desc.regulators_node = of_match_ptr("regulators"),
+		.desc.ops = &da9062_buck_ops,
+		.desc.min_uV = (300) * 1000,
+		.desc.uV_step = (10) * 1000,
+		.desc.n_voltages = ((1570) - (300))/(10) + 1,
+		.current_limits = da9062_buck_a_limits,
+		.n_current_limits = ARRAY_SIZE(da9062_buck_a_limits),
+		.desc.enable_reg = DA9062AA_BUCK1_CONT,
+		.desc.enable_mask = DA9062AA_BUCK1_EN_MASK,
+		.desc.vsel_reg = DA9062AA_VBUCK1_A,
+		.desc.vsel_mask = DA9062AA_VBUCK1_A_MASK,
+		.desc.linear_min_sel = 0,
+		.sleep = REG_FIELD(DA9062AA_VBUCK1_A,
+			__builtin_ffs((int)DA9062AA_BUCK1_SL_A_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_BUCK1_SL_A_MASK)) - 1),
+		.suspend_sleep = REG_FIELD(DA9062AA_VBUCK1_B,
+			__builtin_ffs((int)DA9062AA_BUCK1_SL_B_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_BUCK1_SL_B_MASK)) - 1),
+		.suspend_vsel_reg = DA9062AA_VBUCK1_B,
+		.mode = REG_FIELD(DA9062AA_BUCK1_CFG,
+			__builtin_ffs((int)DA9062AA_BUCK1_MODE_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_BUCK1_MODE_MASK)) - 1),
+		.suspend = REG_FIELD(DA9062AA_DVC_1,
+			__builtin_ffs((int)DA9062AA_VBUCK1_SEL_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_VBUCK1_SEL_MASK)) - 1),
+		.ilimit = REG_FIELD(DA9062AA_BUCK_ILIM_C,
+			__builtin_ffs((int)DA9062AA_BUCK1_ILIM_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_BUCK1_ILIM_MASK)) - 1),
+	},
+	{
+		.desc.id = DA9062_ID_BUCK2,
+		.desc.name = "DA9062 BUCK2",
+		.desc.of_match = of_match_ptr("buck2"),
+		.desc.regulators_node = of_match_ptr("regulators"),
+		.desc.ops = &da9062_buck_ops,
+		.desc.min_uV = (300) * 1000,
+		.desc.uV_step = (10) * 1000,
+		.desc.n_voltages = ((1570) - (300))/(10) + 1,
+		.current_limits = da9062_buck_a_limits,
+		.n_current_limits = ARRAY_SIZE(da9062_buck_a_limits),
+		.desc.enable_reg = DA9062AA_BUCK2_CONT,
+		.desc.enable_mask = DA9062AA_BUCK2_EN_MASK,
+		.desc.vsel_reg = DA9062AA_VBUCK2_A,
+		.desc.vsel_mask = DA9062AA_VBUCK2_A_MASK,
+		.desc.linear_min_sel = 0,
+		.sleep = REG_FIELD(DA9062AA_VBUCK2_A,
+			__builtin_ffs((int)DA9062AA_BUCK2_SL_A_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_BUCK2_SL_A_MASK)) - 1),
+		.suspend_sleep = REG_FIELD(DA9062AA_VBUCK2_B,
+			__builtin_ffs((int)DA9062AA_BUCK2_SL_B_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_BUCK2_SL_B_MASK)) - 1),
+		.suspend_vsel_reg = DA9062AA_VBUCK2_B,
+		.mode = REG_FIELD(DA9062AA_BUCK2_CFG,
+			__builtin_ffs((int)DA9062AA_BUCK2_MODE_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_BUCK2_MODE_MASK)) - 1),
+		.suspend = REG_FIELD(DA9062AA_DVC_1,
+			__builtin_ffs((int)DA9062AA_VBUCK2_SEL_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_VBUCK2_SEL_MASK)) - 1),
+		.ilimit = REG_FIELD(DA9062AA_BUCK_ILIM_C,
+			__builtin_ffs((int)DA9062AA_BUCK2_ILIM_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_BUCK2_ILIM_MASK)) - 1),
+	},
+	{
+		.desc.id = DA9062_ID_BUCK3,
+		.desc.name = "DA9062 BUCK3",
+		.desc.of_match = of_match_ptr("buck3"),
+		.desc.regulators_node = of_match_ptr("regulators"),
+		.desc.ops = &da9062_buck_ops,
+		.desc.min_uV = (800) * 1000,
+		.desc.uV_step = (20) * 1000,
+		.desc.n_voltages = ((3340) - (800))/(20) + 1,
+		.current_limits = da9062_buck_b_limits,
+		.n_current_limits = ARRAY_SIZE(da9062_buck_b_limits),
+		.desc.enable_reg = DA9062AA_BUCK3_CONT,
+		.desc.enable_mask = DA9062AA_BUCK3_EN_MASK,
+		.desc.vsel_reg = DA9062AA_VBUCK3_A,
+		.desc.vsel_mask = DA9062AA_VBUCK3_A_MASK,
+		.desc.linear_min_sel = 0,
+		.sleep = REG_FIELD(DA9062AA_VBUCK3_A,
+			__builtin_ffs((int)DA9062AA_BUCK3_SL_A_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_BUCK3_SL_A_MASK)) - 1),
+		.suspend_sleep = REG_FIELD(DA9062AA_VBUCK3_B,
+			__builtin_ffs((int)DA9062AA_BUCK3_SL_B_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_BUCK3_SL_B_MASK)) - 1),
+		.suspend_vsel_reg = DA9062AA_VBUCK3_B,
+		.mode = REG_FIELD(DA9062AA_BUCK3_CFG,
+			__builtin_ffs((int)DA9062AA_BUCK3_MODE_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_BUCK3_MODE_MASK)) - 1),
+		.suspend = REG_FIELD(DA9062AA_DVC_1,
+			__builtin_ffs((int)DA9062AA_VBUCK3_SEL_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_VBUCK3_SEL_MASK)) - 1),
+		.ilimit = REG_FIELD(DA9062AA_BUCK_ILIM_A,
+			__builtin_ffs((int)DA9062AA_BUCK3_ILIM_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_BUCK3_ILIM_MASK)) - 1),
+	},
+	{
+		.desc.id = DA9062_ID_BUCK4,
+		.desc.name = "DA9062 BUCK4",
+		.desc.of_match = of_match_ptr("buck4"),
+		.desc.regulators_node = of_match_ptr("regulators"),
+		.desc.ops = &da9062_buck_ops,
+		.desc.min_uV = (530) * 1000,
+		.desc.uV_step = (10) * 1000,
+		.desc.n_voltages = ((1800) - (530))/(10) + 1,
+		.current_limits = da9062_buck_a_limits,
+		.n_current_limits = ARRAY_SIZE(da9062_buck_a_limits),
+		.desc.enable_reg = DA9062AA_BUCK4_CONT,
+		.desc.enable_mask = DA9062AA_BUCK4_EN_MASK,
+		.desc.vsel_reg = DA9062AA_VBUCK4_A,
+		.desc.vsel_mask = DA9062AA_VBUCK4_A_MASK,
+		.desc.linear_min_sel = 0,
+		.sleep = REG_FIELD(DA9062AA_VBUCK4_A,
+			__builtin_ffs((int)DA9062AA_BUCK4_SL_A_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_BUCK4_SL_A_MASK)) - 1),
+		.suspend_sleep = REG_FIELD(DA9062AA_VBUCK4_B,
+			__builtin_ffs((int)DA9062AA_BUCK4_SL_B_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_BUCK4_SL_B_MASK)) - 1),
+		.suspend_vsel_reg = DA9062AA_VBUCK4_B,
+		.mode = REG_FIELD(DA9062AA_BUCK4_CFG,
+			__builtin_ffs((int)DA9062AA_BUCK4_MODE_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_BUCK4_MODE_MASK)) - 1),
+		.suspend = REG_FIELD(DA9062AA_DVC_1,
+			__builtin_ffs((int)DA9062AA_VBUCK4_SEL_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_VBUCK4_SEL_MASK)) - 1),
+		.ilimit = REG_FIELD(DA9062AA_BUCK_ILIM_B,
+			__builtin_ffs((int)DA9062AA_BUCK4_ILIM_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_BUCK4_ILIM_MASK)) - 1),
+	},
+	{
+		.desc.id = DA9062_ID_LDO1,
+		.desc.name = "DA9062 LDO1",
+		.desc.of_match = of_match_ptr("ldo1"),
+		.desc.regulators_node = of_match_ptr("regulators"),
+		.desc.ops = &da9062_ldo_ops,
+		.desc.min_uV = (900) * 1000,
+		.desc.uV_step = (50) * 1000,
+		.desc.n_voltages = ((3600) - (900))/(50) + 1,
+		.desc.enable_reg = DA9062AA_LDO1_CONT,
+		.desc.enable_mask = DA9062AA_LDO1_EN_MASK,
+		.desc.vsel_reg = DA9062AA_VLDO1_A,
+		.desc.vsel_mask = DA9062AA_VLDO1_A_MASK,
+		.desc.linear_min_sel = 0,
+		.sleep = REG_FIELD(DA9062AA_VLDO1_A,
+			__builtin_ffs((int)DA9062AA_LDO1_SL_A_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_LDO1_SL_A_MASK)) - 1),
+		.suspend_sleep = REG_FIELD(DA9062AA_VLDO1_B,
+			__builtin_ffs((int)DA9062AA_LDO1_SL_B_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_LDO1_SL_B_MASK)) - 1),
+		.suspend_vsel_reg = DA9062AA_VLDO1_B,
+		.suspend = REG_FIELD(DA9062AA_DVC_1,
+			__builtin_ffs((int)DA9062AA_VLDO1_SEL_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_VLDO1_SEL_MASK)) - 1),
+		.oc_event = REG_FIELD(DA9062AA_STATUS_D,
+			__builtin_ffs((int)DA9062AA_LDO1_ILIM_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_LDO1_ILIM_MASK)) - 1),
+	},
+	{
+		.desc.id = DA9062_ID_LDO2,
+		.desc.name = "DA9062 LDO2",
+		.desc.of_match = of_match_ptr("ldo2"),
+		.desc.regulators_node = of_match_ptr("regulators"),
+		.desc.ops = &da9062_ldo_ops,
+		.desc.min_uV = (900) * 1000,
+		.desc.uV_step = (50) * 1000,
+		.desc.n_voltages = ((3600) - (600))/(50) + 1,
+		.desc.enable_reg = DA9062AA_LDO2_CONT,
+		.desc.enable_mask = DA9062AA_LDO2_EN_MASK,
+		.desc.vsel_reg = DA9062AA_VLDO2_A,
+		.desc.vsel_mask = DA9062AA_VLDO2_A_MASK,
+		.desc.linear_min_sel = 0,
+		.sleep = REG_FIELD(DA9062AA_VLDO2_A,
+			__builtin_ffs((int)DA9062AA_LDO2_SL_A_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_LDO2_SL_A_MASK)) - 1),
+		.suspend_sleep = REG_FIELD(DA9062AA_VLDO2_B,
+			__builtin_ffs((int)DA9062AA_LDO2_SL_B_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_LDO2_SL_B_MASK)) - 1),
+		.suspend_vsel_reg = DA9062AA_VLDO2_B,
+		.suspend = REG_FIELD(DA9062AA_DVC_1,
+			__builtin_ffs((int)DA9062AA_VLDO2_SEL_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_VLDO2_SEL_MASK)) - 1),
+		.oc_event = REG_FIELD(DA9062AA_STATUS_D,
+			__builtin_ffs((int)DA9062AA_LDO2_ILIM_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_LDO2_ILIM_MASK)) - 1),
+	},
+	{
+		.desc.id = DA9062_ID_LDO3,
+		.desc.name = "DA9062 LDO3",
+		.desc.of_match = of_match_ptr("ldo3"),
+		.desc.regulators_node = of_match_ptr("regulators"),
+		.desc.ops = &da9062_ldo_ops,
+		.desc.min_uV = (900) * 1000,
+		.desc.uV_step = (50) * 1000,
+		.desc.n_voltages = ((3600) - (900))/(50) + 1,
+		.desc.enable_reg = DA9062AA_LDO3_CONT,
+		.desc.enable_mask = DA9062AA_LDO3_EN_MASK,
+		.desc.vsel_reg = DA9062AA_VLDO3_A,
+		.desc.vsel_mask = DA9062AA_VLDO3_A_MASK,
+		.desc.linear_min_sel = 0,
+		.sleep = REG_FIELD(DA9062AA_VLDO3_A,
+			__builtin_ffs((int)DA9062AA_LDO3_SL_A_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_LDO3_SL_A_MASK)) - 1),
+		.suspend_sleep = REG_FIELD(DA9062AA_VLDO3_B,
+			__builtin_ffs((int)DA9062AA_LDO3_SL_B_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_LDO3_SL_B_MASK)) - 1),
+		.suspend_vsel_reg = DA9062AA_VLDO3_B,
+		.suspend = REG_FIELD(DA9062AA_DVC_1,
+			__builtin_ffs((int)DA9062AA_VLDO3_SEL_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_VLDO3_SEL_MASK)) - 1),
+		.oc_event = REG_FIELD(DA9062AA_STATUS_D,
+			__builtin_ffs((int)DA9062AA_LDO3_ILIM_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_LDO3_ILIM_MASK)) - 1),
+	},
+	{
+		.desc.id = DA9062_ID_LDO4,
+		.desc.name = "DA9062 LDO4",
+		.desc.of_match = of_match_ptr("ldo4"),
+		.desc.regulators_node = of_match_ptr("regulators"),
+		.desc.ops = &da9062_ldo_ops,
+		.desc.min_uV = (900) * 1000,
+		.desc.uV_step = (50) * 1000,
+		.desc.n_voltages = ((3600) - (900))/(50) + 1,
+		.desc.enable_reg = DA9062AA_LDO4_CONT,
+		.desc.enable_mask = DA9062AA_LDO4_EN_MASK,
+		.desc.vsel_reg = DA9062AA_VLDO4_A,
+		.desc.vsel_mask = DA9062AA_VLDO4_A_MASK,
+		.desc.linear_min_sel = 0,
+		.sleep = REG_FIELD(DA9062AA_VLDO4_A,
+			__builtin_ffs((int)DA9062AA_LDO4_SL_A_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_LDO4_SL_A_MASK)) - 1),
+		.suspend_sleep = REG_FIELD(DA9062AA_VLDO4_B,
+			__builtin_ffs((int)DA9062AA_LDO4_SL_B_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_LDO4_SL_B_MASK)) - 1),
+		.suspend_vsel_reg = DA9062AA_VLDO4_B,
+		.suspend = REG_FIELD(DA9062AA_DVC_1,
+			__builtin_ffs((int)DA9062AA_VLDO4_SEL_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_VLDO4_SEL_MASK)) - 1),
+		.oc_event = REG_FIELD(DA9062AA_STATUS_D,
+			__builtin_ffs((int)DA9062AA_LDO4_ILIM_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_LDO4_ILIM_MASK)) - 1),
+	},
+};
+
+/* Regulator interrupt handlers */
+static irqreturn_t da9062_ldo_lim_event(int irq, void *data)
+{
+	struct da9062_regulators *regulators = data;
+	struct da9062 *hw = regulators->regulator[0].hw;
+	struct da9062_regulator *regl;
+	int handled = IRQ_NONE;
+	int bits, i, ret;
+
+	ret = regmap_read(hw->regmap, DA9062AA_STATUS_D, &bits);
+	if (ret < 0) {
+		dev_err(hw->dev,
+			"Failed to read LDO overcurrent indicator\n");
+		goto ldo_lim_error;
+	}
+
+	for (i = regulators->n_regulators - 1; i >= 0; i--) {
+		regl = &regulators->regulator[i];
+		if (regl->info->oc_event.reg != DA9062AA_STATUS_D)
+			continue;
+
+		if (BIT(regl->info->oc_event.lsb) & bits) {
+			regulator_notifier_call_chain(regl->rdev,
+					REGULATOR_EVENT_OVER_CURRENT, NULL);
+			handled = IRQ_HANDLED;
+		}
+	}
+
+ldo_lim_error:
+	return handled;
+}
+
+static int da9062_regulator_probe(struct platform_device *pdev)
+{
+	struct da9062 *chip = dev_get_drvdata(pdev->dev.parent);
+	struct da9062_regulators *regulators;
+	struct da9062_regulator *regl;
+	struct regulator_config config = { };
+	int irq, n, ret;
+	size_t size;
+
+	/* Allocate memory required by usable regulators */
+	size = sizeof(struct da9062_regulators) +
+		DA9062_MAX_REGULATORS * sizeof(struct da9062_regulator);
+	regulators = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
+	if (!regulators)
+		return -ENOMEM;
+
+	regulators->n_regulators = DA9062_MAX_REGULATORS;
+	platform_set_drvdata(pdev, regulators);
+
+	n = 0;
+	while (n < regulators->n_regulators) {
+		/* Initialise regulator structure */
+		regl = &regulators->regulator[n];
+		regl->hw = chip;
+		regl->info = &local_regulator_info[n];
+		regl->desc = regl->info->desc;
+		regl->desc.type = REGULATOR_VOLTAGE;
+		regl->desc.owner = THIS_MODULE;
+
+		if (regl->info->mode.reg)
+			regl->mode = devm_regmap_field_alloc(
+					&pdev->dev,
+					chip->regmap,
+					regl->info->mode);
+		if (regl->info->suspend.reg)
+			regl->suspend = devm_regmap_field_alloc(
+					&pdev->dev,
+					chip->regmap,
+					regl->info->suspend);
+		if (regl->info->sleep.reg)
+			regl->sleep = devm_regmap_field_alloc(
+					&pdev->dev,
+					chip->regmap,
+					regl->info->sleep);
+		if (regl->info->suspend_sleep.reg)
+			regl->suspend_sleep = devm_regmap_field_alloc(
+					&pdev->dev,
+					chip->regmap,
+					regl->info->suspend_sleep);
+		if (regl->info->ilimit.reg)
+			regl->ilimit = devm_regmap_field_alloc(
+					&pdev->dev,
+					chip->regmap,
+					regl->info->ilimit);
+
+		/* Register regulator */
+		memset(&config, 0, sizeof(config));
+		config.dev = chip->dev;
+		config.driver_data = regl;
+		config.regmap = chip->regmap;
+
+		regl->rdev = devm_regulator_register(&pdev->dev, &regl->desc,
+						     &config);
+		if (IS_ERR(regl->rdev)) {
+			dev_err(&pdev->dev,
+				"Failed to register %s regulator\n",
+				regl->desc.name);
+			return PTR_ERR(regl->rdev);
+		}
+
+		n++;
+	}
+
+	/* LDOs overcurrent event support */
+	irq = platform_get_irq_byname(pdev, "LDO_LIM");
+	if (irq < 0) {
+		dev_err(&pdev->dev, "Failed to get IRQ.\n");
+		return irq;
+	}
+	regulators->irq_ldo_lim = irq;
+
+	ret = devm_request_threaded_irq(&pdev->dev, irq,
+					NULL, da9062_ldo_lim_event,
+					IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+					"LDO_LIM", regulators);
+	if (ret) {
+		dev_warn(&pdev->dev,
+			 "Failed to request LDO_LIM IRQ.\n");
+		regulators->irq_ldo_lim = -ENXIO;
+	}
+
+	return 0;
+}
+
+static struct platform_driver da9062_regulator_driver = {
+	.driver = {
+		.name = "da9062-regulators",
+	},
+	.probe = da9062_regulator_probe,
+};
+
+static int __init da9062_regulator_init(void)
+{
+	return platform_driver_register(&da9062_regulator_driver);
+}
+subsys_initcall(da9062_regulator_init);
+
+static void __exit da9062_regulator_cleanup(void)
+{
+	platform_driver_unregister(&da9062_regulator_driver);
+}
+module_exit(da9062_regulator_cleanup);
+
+/* Module information */
+MODULE_AUTHOR("S Twiss <stwiss.opensource@diasemi.com>");
+MODULE_DESCRIPTION("REGULATOR device driver for Dialog DA9062");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:da9062-regulators");
diff --git a/kernel/drivers/regulator/da9063-regulator.c b/kernel/drivers/regulator/da9063-regulator.c
index 31c2c593a..536e931eb 100644
--- a/kernel/drivers/regulator/da9063-regulator.c
+++ b/kernel/drivers/regulator/da9063-regulator.c
@@ -117,9 +117,6 @@ struct da9063_regulator {
 
 /* Encapsulates all information for the regulators driver */
 struct da9063_regulators {
-	int					irq_ldo_lim;
-	int					irq_uvov;
-
 	unsigned				n_regulators;
 	/* Array size to be defined during init. Keep at end. */
 	struct da9063_regulator			regulator[0];
@@ -701,7 +698,7 @@ static struct da9063_regulators_pdata *da9063_parse_regulators_dt(
 		rdata->initdata = da9063_matches[i].init_data;
 
 		n++;
-	};
+	}
 
 	*da9063_reg_matches = da9063_matches;
 	return pdata;
@@ -867,35 +864,23 @@ static int da9063_regulator_probe(struct platform_device *pdev)
 		return irq;
 	}
 
-	ret = request_threaded_irq(irq,
+	ret = devm_request_threaded_irq(&pdev->dev, irq,
 				NULL, da9063_ldo_lim_event,
 				IRQF_TRIGGER_LOW | IRQF_ONESHOT,
 				"LDO_LIM", regulators);
 	if (ret) {
-		dev_err(&pdev->dev,
-				"Failed to request LDO_LIM IRQ.\n");
-		regulators->irq_ldo_lim = -ENXIO;
+		dev_err(&pdev->dev, "Failed to request LDO_LIM IRQ.\n");
+		return ret;
 	}
 
 	return 0;
 }
 
-static int da9063_regulator_remove(struct platform_device *pdev)
-{
-	struct da9063_regulators *regulators = platform_get_drvdata(pdev);
-
-	free_irq(regulators->irq_ldo_lim, regulators);
-	free_irq(regulators->irq_uvov, regulators);
-
-	return 0;
-}
-
 static struct platform_driver da9063_regulator_driver = {
 	.driver = {
 		.name = DA9063_DRVNAME_REGULATORS,
 	},
 	.probe = da9063_regulator_probe,
-	.remove = da9063_regulator_remove,
 };
 
 static int __init da9063_regulator_init(void)
diff --git a/kernel/drivers/regulator/da9210-regulator.c b/kernel/drivers/regulator/da9210-regulator.c
index f0489cb90..b3517830e 100644
--- a/kernel/drivers/regulator/da9210-regulator.c
+++ b/kernel/drivers/regulator/da9210-regulator.c
@@ -22,6 +22,8 @@
 #include <linux/i2c.h>
 #include <linux/module.h>
 #include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
 #include <linux/slab.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
@@ -120,6 +122,55 @@ static int da9210_get_current_limit(struct regulator_dev *rdev)
 	return da9210_buck_limits[sel];
 }
 
+static irqreturn_t da9210_irq_handler(int irq, void *data)
+{
+	struct da9210 *chip = data;
+	unsigned int val, handled = 0;
+	int error, ret = IRQ_NONE;
+
+	error = regmap_read(chip->regmap, DA9210_REG_EVENT_B, &val);
+	if (error < 0)
+		goto error_i2c;
+
+	if (val & DA9210_E_OVCURR) {
+		regulator_notifier_call_chain(chip->rdev,
+					      REGULATOR_EVENT_OVER_CURRENT,
+					      NULL);
+		handled |= DA9210_E_OVCURR;
+	}
+	if (val & DA9210_E_NPWRGOOD) {
+		regulator_notifier_call_chain(chip->rdev,
+					      REGULATOR_EVENT_UNDER_VOLTAGE,
+					      NULL);
+		handled |= DA9210_E_NPWRGOOD;
+	}
+	if (val & (DA9210_E_TEMP_WARN | DA9210_E_TEMP_CRIT)) {
+		regulator_notifier_call_chain(chip->rdev,
+					      REGULATOR_EVENT_OVER_TEMP, NULL);
+		handled |= val & (DA9210_E_TEMP_WARN | DA9210_E_TEMP_CRIT);
+	}
+	if (val & DA9210_E_VMAX) {
+		regulator_notifier_call_chain(chip->rdev,
+					      REGULATOR_EVENT_REGULATION_OUT,
+					      NULL);
+		handled |= DA9210_E_VMAX;
+	}
+	if (handled) {
+		/* Clear handled events */
+		error = regmap_write(chip->regmap, DA9210_REG_EVENT_B, handled);
+		if (error < 0)
+			goto error_i2c;
+
+		ret = IRQ_HANDLED;
+	}
+
+	return ret;
+
+error_i2c:
+	dev_err(regmap_get_device(chip->regmap), "I2C error : %d\n", error);
+	return ret;
+}
+
 /*
  * I2C driver interface functions
  */
@@ -168,6 +219,30 @@ static int da9210_i2c_probe(struct i2c_client *i2c,
 	}
 
 	chip->rdev = rdev;
+	if (i2c->irq) {
+		error = devm_request_threaded_irq(&i2c->dev, i2c->irq, NULL,
+						  da9210_irq_handler,
+						  IRQF_TRIGGER_LOW |
+						  IRQF_ONESHOT | IRQF_SHARED,
+						  "da9210", chip);
+		if (error) {
+			dev_err(&i2c->dev, "Failed to request IRQ%u: %d\n",
+				i2c->irq, error);
+			return error;
+		}
+
+		error = regmap_update_bits(chip->regmap, DA9210_REG_MASK_B,
+					 DA9210_M_OVCURR | DA9210_M_NPWRGOOD |
+					 DA9210_M_TEMP_WARN |
+					 DA9210_M_TEMP_CRIT | DA9210_M_VMAX, 0);
+		if (error < 0) {
+			dev_err(&i2c->dev, "Failed to update mask reg: %d\n",
+				error);
+			return error;
+		}
+	} else {
+		dev_warn(&i2c->dev, "No IRQ configured\n");
+	}
 
 	i2c_set_clientdata(i2c, chip);
 
@@ -184,7 +259,6 @@ MODULE_DEVICE_TABLE(i2c, da9210_i2c_id);
 static struct i2c_driver da9210_regulator_driver = {
 	.driver = {
 		.name = "da9210",
-		.owner = THIS_MODULE,
 	},
 	.probe = da9210_i2c_probe,
 	.id_table = da9210_i2c_id,
diff --git a/kernel/drivers/regulator/da9211-regulator.c b/kernel/drivers/regulator/da9211-regulator.c
index df79e4b19..04ef65b7e 100644
--- a/kernel/drivers/regulator/da9211-regulator.c
+++ b/kernel/drivers/regulator/da9211-regulator.c
@@ -1,6 +1,6 @@
 /*
- * da9211-regulator.c - Regulator device driver for DA9211/DA9213
- * Copyright (C) 2014  Dialog Semiconductor Ltd.
+ * da9211-regulator.c - Regulator device driver for DA9211/DA9213/DA9215
+ * Copyright (C) 2015  Dialog Semiconductor Ltd.
  *
  * This library is free software; you can redistribute it and/or
  * modify it under the terms of the GNU Library General Public
@@ -32,6 +32,7 @@
 /* DEVICE IDs */
 #define DA9211_DEVICE_ID	0x22
 #define DA9213_DEVICE_ID	0x23
+#define DA9215_DEVICE_ID	0x24
 
 #define DA9211_BUCK_MODE_SLEEP	1
 #define DA9211_BUCK_MODE_SYNC	2
@@ -90,6 +91,13 @@ static const int da9213_current_limits[] = {
 	3000000, 3200000, 3400000, 3600000, 3800000, 4000000, 4200000, 4400000,
 	4600000, 4800000, 5000000, 5200000, 5400000, 5600000, 5800000, 6000000
 };
+/* Current limits for DA9215 buck (uA) indices
+ * corresponds with register values
+ */
+static const int da9215_current_limits[] = {
+	4000000, 4200000, 4400000, 4600000, 4800000, 5000000, 5200000, 5400000,
+	5600000, 5800000, 6000000, 6200000, 6400000, 6600000, 6800000, 7000000
+};
 
 static unsigned int da9211_buck_get_mode(struct regulator_dev *rdev)
 {
@@ -157,6 +165,10 @@ static int da9211_set_current_limit(struct regulator_dev *rdev, int min,
 		current_limits = da9213_current_limits;
 		max_size = ARRAY_SIZE(da9213_current_limits)-1;
 		break;
+	case DA9215:
+		current_limits = da9215_current_limits;
+		max_size = ARRAY_SIZE(da9215_current_limits)-1;
+		break;
 	default:
 		return -EINVAL;
 	}
@@ -189,6 +201,9 @@ static int da9211_get_current_limit(struct regulator_dev *rdev)
 	case DA9213:
 		current_limits = da9213_current_limits;
 		break;
+	case DA9215:
+		current_limits = da9215_current_limits;
+		break;
 	default:
 		return -EINVAL;
 	}
@@ -350,13 +365,11 @@ static int da9211_regulator_init(struct da9211 *chip)
 	/* If configuration for 1/2 bucks is different between platform data
 	 * and the register, driver should exit.
 	 */
-	if ((chip->pdata->num_buck == 2 && data == 0x40)
-		|| (chip->pdata->num_buck == 1 && data == 0x00)) {
-		if (data == 0)
-			chip->num_regulator = 1;
-		else
-			chip->num_regulator = 2;
-	} else {
+	if (chip->pdata->num_buck == 1 && data == 0x00)
+		chip->num_regulator = 1;
+	else if (chip->pdata->num_buck == 2 && data != 0x00)
+		chip->num_regulator = 2;
+	else {
 		dev_err(chip->dev, "Configuration is mismatched\n");
 		return -EINVAL;
 	}
@@ -438,6 +451,9 @@ static int da9211_i2c_probe(struct i2c_client *i2c,
 	case DA9213_DEVICE_ID:
 		chip->chip_id = DA9213;
 		break;
+	case DA9215_DEVICE_ID:
+		chip->chip_id = DA9215;
+		break;
 	default:
 		dev_err(chip->dev, "Unsupported device id = 0x%x.\n", data);
 		return -ENODEV;
@@ -478,6 +494,7 @@ static int da9211_i2c_probe(struct i2c_client *i2c,
 static const struct i2c_device_id da9211_i2c_id[] = {
 	{"da9211", DA9211},
 	{"da9213", DA9213},
+	{"da9215", DA9215},
 	{},
 };
 MODULE_DEVICE_TABLE(i2c, da9211_i2c_id);
@@ -486,6 +503,7 @@ MODULE_DEVICE_TABLE(i2c, da9211_i2c_id);
 static const struct of_device_id da9211_dt_ids[] = {
 	{ .compatible = "dlg,da9211", .data = &da9211_i2c_id[0] },
 	{ .compatible = "dlg,da9213", .data = &da9211_i2c_id[1] },
+	{ .compatible = "dlg,da9215", .data = &da9211_i2c_id[2] },
 	{},
 };
 MODULE_DEVICE_TABLE(of, da9211_dt_ids);
@@ -494,7 +512,6 @@ MODULE_DEVICE_TABLE(of, da9211_dt_ids);
 static struct i2c_driver da9211_regulator_driver = {
 	.driver = {
 		.name = "da9211",
-		.owner = THIS_MODULE,
 		.of_match_table = of_match_ptr(da9211_dt_ids),
 	},
 	.probe = da9211_i2c_probe,
@@ -504,5 +521,5 @@ static struct i2c_driver da9211_regulator_driver = {
 module_i2c_driver(da9211_regulator_driver);
 
 MODULE_AUTHOR("James Ban <James.Ban.opensource@diasemi.com>");
-MODULE_DESCRIPTION("Regulator device driver for Dialog DA9211/DA9213");
-MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Regulator device driver for Dialog DA9211/DA9213/DA9215");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/regulator/da9211-regulator.h b/kernel/drivers/regulator/da9211-regulator.h
index 93fa9df27..d6ad96fc6 100644
--- a/kernel/drivers/regulator/da9211-regulator.h
+++ b/kernel/drivers/regulator/da9211-regulator.h
@@ -1,16 +1,16 @@
 /*
- * da9211-regulator.h - Regulator definitions for DA9211/DA9213
- * Copyright (C) 2014  Dialog Semiconductor Ltd.
+ * da9211-regulator.h - Regulator definitions for DA9211/DA9213/DA9215
+ * Copyright (C) 2015  Dialog Semiconductor Ltd.
  *
- * This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Library General Public
- * License as published by the Free Software Foundation; either
- * version 2 of the License, or (at your option) any later version.
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
  *
- * This library is distributed in the hope that it will be useful,
+ * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * Library General Public License for more details.
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
  */
 
 #ifndef __DA9211_REGISTERS_H__
diff --git a/kernel/drivers/regulator/fan53555.c b/kernel/drivers/regulator/fan53555.c
index 3c25db89a..4940e8287 100644
--- a/kernel/drivers/regulator/fan53555.c
+++ b/kernel/drivers/regulator/fan53555.c
@@ -182,6 +182,7 @@ static int fan53555_set_ramp(struct regulator_dev *rdev, int ramp)
 static struct regulator_ops fan53555_regulator_ops = {
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
 	.map_voltage = regulator_map_voltage_linear,
 	.list_voltage = regulator_list_voltage_linear,
 	.set_suspend_voltage = fan53555_set_suspend_voltage,
@@ -438,6 +439,7 @@ static const struct i2c_device_id fan53555_id[] = {
 	},
 	{ },
 };
+MODULE_DEVICE_TABLE(i2c, fan53555_id);
 
 static struct i2c_driver fan53555_regulator_driver = {
 	.driver = {
diff --git a/kernel/drivers/regulator/gpio-regulator.c b/kernel/drivers/regulator/gpio-regulator.c
index 464018de7..7bba8b747 100644
--- a/kernel/drivers/regulator/gpio-regulator.c
+++ b/kernel/drivers/regulator/gpio-regulator.c
@@ -394,6 +394,7 @@ static const struct of_device_id regulator_gpio_of_match[] = {
 	{ .compatible = "regulator-gpio", },
 	{},
 };
+MODULE_DEVICE_TABLE(of, regulator_gpio_of_match);
 #endif
 
 static struct platform_driver gpio_regulator_driver = {
diff --git a/kernel/drivers/regulator/helpers.c b/kernel/drivers/regulator/helpers.c
index cbc39096c..3bbb32680 100644
--- a/kernel/drivers/regulator/helpers.c
+++ b/kernel/drivers/regulator/helpers.c
@@ -275,7 +275,7 @@ int regulator_map_voltage_linear(struct regulator_dev *rdev,
 EXPORT_SYMBOL_GPL(regulator_map_voltage_linear);
 
 /**
- * regulator_map_voltage_linear - map_voltage() for multiple linear ranges
+ * regulator_map_voltage_linear_range - map_voltage() for multiple linear ranges
  *
  * @rdev: Regulator to operate on
  * @min_uV: Lower bound for voltage
diff --git a/kernel/drivers/regulator/isl6271a-regulator.c b/kernel/drivers/regulator/isl6271a-regulator.c
index 6e5da95fa..4abd8e9c8 100644
--- a/kernel/drivers/regulator/isl6271a-regulator.c
+++ b/kernel/drivers/regulator/isl6271a-regulator.c
@@ -156,7 +156,6 @@ MODULE_DEVICE_TABLE(i2c, isl6271a_id);
 static struct i2c_driver isl6271a_i2c_driver = {
 	.driver = {
 		.name = "isl6271a",
-		.owner = THIS_MODULE,
 	},
 	.probe = isl6271a_probe,
 	.id_table = isl6271a_id,
diff --git a/kernel/drivers/regulator/isl9305.c b/kernel/drivers/regulator/isl9305.c
index 6e3a15fe0..257c1943e 100644
--- a/kernel/drivers/regulator/isl9305.c
+++ b/kernel/drivers/regulator/isl9305.c
@@ -183,6 +183,7 @@ static const struct of_device_id isl9305_dt_ids[] = {
 	{ .compatible = "isil,isl9305h" },
 	{},
 };
+MODULE_DEVICE_TABLE(of, isl9305_dt_ids);
 #endif
 
 static const struct i2c_device_id isl9305_i2c_id[] = {
@@ -195,7 +196,6 @@ MODULE_DEVICE_TABLE(i2c, isl9305_i2c_id);
 static struct i2c_driver isl9305_regulator_driver = {
 	.driver = {
 		.name = "isl9305",
-		.owner = THIS_MODULE,
 		.of_match_table	= of_match_ptr(isl9305_dt_ids),
 	},
 	.probe = isl9305_i2c_probe,
diff --git a/kernel/drivers/regulator/lp3971.c b/kernel/drivers/regulator/lp3971.c
index 66fd2330d..15c25c622 100644
--- a/kernel/drivers/regulator/lp3971.c
+++ b/kernel/drivers/regulator/lp3971.c
@@ -452,7 +452,6 @@ MODULE_DEVICE_TABLE(i2c, lp3971_i2c_id);
 static struct i2c_driver lp3971_i2c_driver = {
 	.driver = {
 		.name = "LP3971",
-		.owner = THIS_MODULE,
 	},
 	.probe    = lp3971_i2c_probe,
 	.id_table = lp3971_i2c_id,
diff --git a/kernel/drivers/regulator/lp3972.c b/kernel/drivers/regulator/lp3972.c
index aea485afc..3a7e96e2c 100644
--- a/kernel/drivers/regulator/lp3972.c
+++ b/kernel/drivers/regulator/lp3972.c
@@ -550,7 +550,6 @@ MODULE_DEVICE_TABLE(i2c, lp3972_i2c_id);
 static struct i2c_driver lp3972_i2c_driver = {
 	.driver = {
 		.name = "lp3972",
-		.owner = THIS_MODULE,
 	},
 	.probe    = lp3972_i2c_probe,
 	.id_table = lp3972_i2c_id,
diff --git a/kernel/drivers/regulator/lp872x.c b/kernel/drivers/regulator/lp872x.c
index 3de328ab4..e5af07208 100644
--- a/kernel/drivers/regulator/lp872x.c
+++ b/kernel/drivers/regulator/lp872x.c
@@ -849,7 +849,7 @@ static struct lp872x_platform_data
 
 	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
 	if (!pdata)
-		goto out;
+		return ERR_PTR(-ENOMEM);
 
 	of_property_read_u8(np, "ti,general-config", &pdata->general_config);
 	if (of_find_property(np, "ti,update-config", NULL))
@@ -857,7 +857,7 @@ static struct lp872x_platform_data
 
 	pdata->dvs = devm_kzalloc(dev, sizeof(struct lp872x_dvs), GFP_KERNEL);
 	if (!pdata->dvs)
-		goto out;
+		return ERR_PTR(-ENOMEM);
 
 	pdata->dvs->gpio = of_get_named_gpio(np, "ti,dvs-gpio", 0);
 	of_property_read_u8(np, "ti,dvs-vsel", (u8 *)&pdata->dvs->vsel);
@@ -903,15 +903,21 @@ static struct lp872x_platform_data
 static int lp872x_probe(struct i2c_client *cl, const struct i2c_device_id *id)
 {
 	struct lp872x *lp;
+	struct lp872x_platform_data *pdata;
 	int ret;
 	const int lp872x_num_regulators[] = {
 		[LP8720] = LP8720_NUM_REGULATORS,
 		[LP8725] = LP8725_NUM_REGULATORS,
 	};
 
-	if (cl->dev.of_node)
-		cl->dev.platform_data = lp872x_populate_pdata_from_dt(&cl->dev,
+	if (cl->dev.of_node) {
+		pdata = lp872x_populate_pdata_from_dt(&cl->dev,
 					      (enum lp872x_id)id->driver_data);
+		if (IS_ERR(pdata))
+			return PTR_ERR(pdata);
+	} else {
+		pdata = dev_get_platdata(&cl->dev);
+	}
 
 	lp = devm_kzalloc(&cl->dev, sizeof(struct lp872x), GFP_KERNEL);
 	if (!lp)
@@ -927,7 +933,7 @@ static int lp872x_probe(struct i2c_client *cl, const struct i2c_device_id *id)
 	}
 
 	lp->dev = &cl->dev;
-	lp->pdata = dev_get_platdata(&cl->dev);
+	lp->pdata = pdata;
 	lp->chipid = id->driver_data;
 	i2c_set_clientdata(cl, lp);
 
@@ -955,7 +961,6 @@ MODULE_DEVICE_TABLE(i2c, lp872x_ids);
 static struct i2c_driver lp872x_driver = {
 	.driver = {
 		.name = "lp872x",
-		.owner = THIS_MODULE,
 		.of_match_table = of_match_ptr(lp872x_dt_ids),
 	},
 	.probe = lp872x_probe,
diff --git a/kernel/drivers/regulator/lp8755.c b/kernel/drivers/regulator/lp8755.c
index 4a415d4ee..d6773da92 100644
--- a/kernel/drivers/regulator/lp8755.c
+++ b/kernel/drivers/regulator/lp8755.c
@@ -419,20 +419,16 @@ static int lp8755_int_config(struct lp8755_chip *pchip)
 	}
 
 	ret = lp8755_read(pchip, 0x0F, &regval);
-	if (ret < 0)
-		goto err_i2c;
-	pchip->irqmask = regval;
-	ret = request_threaded_irq(pchip->irq, NULL, lp8755_irq_handler,
-				   IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
-				   "lp8755-irq", pchip);
-	if (ret)
+	if (ret < 0) {
+		dev_err(pchip->dev, "i2c acceess error %s\n", __func__);
 		return ret;
+	}
 
-	return ret;
-
-err_i2c:
-	dev_err(pchip->dev, "i2c acceess error %s\n", __func__);
-	return ret;
+	pchip->irqmask = regval;
+	return devm_request_threaded_irq(pchip->dev, pchip->irq, NULL,
+					 lp8755_irq_handler,
+					 IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+					 "lp8755-irq", pchip);
 }
 
 static const struct regmap_config lp8755_regmap = {
@@ -514,9 +510,6 @@ static int lp8755_remove(struct i2c_client *client)
 	for (icnt = 0; icnt < LP8755_BUCK_MAX; icnt++)
 		lp8755_write(pchip, icnt, 0x00);
 
-	if (pchip->irq != 0)
-		free_irq(pchip->irq, pchip);
-
 	return 0;
 }
 
diff --git a/kernel/drivers/regulator/ltc3589.c b/kernel/drivers/regulator/ltc3589.c
index 0ce8e4e0f..972c386b2 100644
--- a/kernel/drivers/regulator/ltc3589.c
+++ b/kernel/drivers/regulator/ltc3589.c
@@ -378,7 +378,7 @@ static bool ltc3589_volatile_reg(struct device *dev, unsigned int reg)
 	return false;
 }
 
-static struct reg_default ltc3589_reg_defaults[] = {
+static const struct reg_default ltc3589_reg_defaults[] = {
 	{ LTC3589_SCR1,   0x00 },
 	{ LTC3589_OVEN,   0x00 },
 	{ LTC3589_SCR2,   0x00 },
@@ -542,7 +542,6 @@ MODULE_DEVICE_TABLE(i2c, ltc3589_i2c_id);
 static struct i2c_driver ltc3589_driver = {
 	.driver = {
 		.name = DRIVER_NAME,
-		.owner = THIS_MODULE,
 	},
 	.probe = ltc3589_probe,
 	.id_table = ltc3589_i2c_id,
@@ -552,4 +551,3 @@ module_i2c_driver(ltc3589_driver);
 MODULE_AUTHOR("Philipp Zabel <p.zabel@pengutronix.de>");
 MODULE_DESCRIPTION("Regulator driver for Linear Technology LTC3589(-1,2)");
 MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("i2c:ltc3589");
diff --git a/kernel/drivers/regulator/max14577.c b/kernel/drivers/regulator/max14577.c
index b3678d289..b2daa6641 100644
--- a/kernel/drivers/regulator/max14577.c
+++ b/kernel/drivers/regulator/max14577.c
@@ -100,31 +100,34 @@ static struct regulator_ops max14577_charger_ops = {
 	.set_current_limit	= max14577_reg_set_current_limit,
 };
 
+#define MAX14577_SAFEOUT_REG	{ \
+	.name		= "SAFEOUT", \
+	.of_match	= of_match_ptr("SAFEOUT"), \
+	.regulators_node = of_match_ptr("regulators"), \
+	.id		= MAX14577_SAFEOUT, \
+	.ops		= &max14577_safeout_ops, \
+	.type		= REGULATOR_VOLTAGE, \
+	.owner		= THIS_MODULE, \
+	.n_voltages	= 1, \
+	.min_uV		= MAX14577_REGULATOR_SAFEOUT_VOLTAGE, \
+	.enable_reg	= MAX14577_REG_CONTROL2, \
+	.enable_mask	= CTRL2_SFOUTORD_MASK, \
+}
+#define MAX14577_CHARGER_REG	{ \
+	.name		= "CHARGER", \
+	.of_match	= of_match_ptr("CHARGER"), \
+	.regulators_node = of_match_ptr("regulators"), \
+	.id		= MAX14577_CHARGER, \
+	.ops		= &max14577_charger_ops, \
+	.type		= REGULATOR_CURRENT, \
+	.owner		= THIS_MODULE, \
+	.enable_reg	= MAX14577_CHG_REG_CHG_CTRL2, \
+	.enable_mask	= CHGCTRL2_MBCHOSTEN_MASK, \
+}
+
 static const struct regulator_desc max14577_supported_regulators[] = {
-	[MAX14577_SAFEOUT] = {
-		.name		= "SAFEOUT",
-		.of_match	= of_match_ptr("SAFEOUT"),
-		.regulators_node = of_match_ptr("regulators"),
-		.id		= MAX14577_SAFEOUT,
-		.ops		= &max14577_safeout_ops,
-		.type		= REGULATOR_VOLTAGE,
-		.owner		= THIS_MODULE,
-		.n_voltages	= 1,
-		.min_uV		= MAX14577_REGULATOR_SAFEOUT_VOLTAGE,
-		.enable_reg	= MAX14577_REG_CONTROL2,
-		.enable_mask	= CTRL2_SFOUTORD_MASK,
-	},
-	[MAX14577_CHARGER] = {
-		.name		= "CHARGER",
-		.of_match	= of_match_ptr("CHARGER"),
-		.regulators_node = of_match_ptr("regulators"),
-		.id		= MAX14577_CHARGER,
-		.ops		= &max14577_charger_ops,
-		.type		= REGULATOR_CURRENT,
-		.owner		= THIS_MODULE,
-		.enable_reg	= MAX14577_CHG_REG_CHG_CTRL2,
-		.enable_mask	= CHGCTRL2_MBCHOSTEN_MASK,
-	},
+	[MAX14577_SAFEOUT] = MAX14577_SAFEOUT_REG,
+	[MAX14577_CHARGER] = MAX14577_CHARGER_REG,
 };
 
 static struct regulator_ops max77836_ldo_ops = {
@@ -138,63 +141,28 @@ static struct regulator_ops max77836_ldo_ops = {
 	/* TODO: add .set_suspend_mode */
 };
 
+#define MAX77836_LDO_REG(num)	{ \
+	.name		= "LDO" # num, \
+	.of_match	= of_match_ptr("LDO" # num), \
+	.regulators_node = of_match_ptr("regulators"), \
+	.id		= MAX77836_LDO ## num, \
+	.ops		= &max77836_ldo_ops, \
+	.type		= REGULATOR_VOLTAGE, \
+	.owner		= THIS_MODULE, \
+	.n_voltages	= MAX77836_REGULATOR_LDO_VOLTAGE_STEPS_NUM, \
+	.min_uV		= MAX77836_REGULATOR_LDO_VOLTAGE_MIN, \
+	.uV_step	= MAX77836_REGULATOR_LDO_VOLTAGE_STEP, \
+	.enable_reg	= MAX77836_LDO_REG_CNFG1_LDO ## num, \
+	.enable_mask	= MAX77836_CNFG1_LDO_PWRMD_MASK, \
+	.vsel_reg	= MAX77836_LDO_REG_CNFG1_LDO ## num, \
+	.vsel_mask	= MAX77836_CNFG1_LDO_TV_MASK, \
+}
+
 static const struct regulator_desc max77836_supported_regulators[] = {
-	[MAX14577_SAFEOUT] = {
-		.name		= "SAFEOUT",
-		.of_match	= of_match_ptr("SAFEOUT"),
-		.regulators_node = of_match_ptr("regulators"),
-		.id		= MAX14577_SAFEOUT,
-		.ops		= &max14577_safeout_ops,
-		.type		= REGULATOR_VOLTAGE,
-		.owner		= THIS_MODULE,
-		.n_voltages	= 1,
-		.min_uV		= MAX14577_REGULATOR_SAFEOUT_VOLTAGE,
-		.enable_reg	= MAX14577_REG_CONTROL2,
-		.enable_mask	= CTRL2_SFOUTORD_MASK,
-	},
-	[MAX14577_CHARGER] = {
-		.name		= "CHARGER",
-		.of_match	= of_match_ptr("CHARGER"),
-		.regulators_node = of_match_ptr("regulators"),
-		.id		= MAX14577_CHARGER,
-		.ops		= &max14577_charger_ops,
-		.type		= REGULATOR_CURRENT,
-		.owner		= THIS_MODULE,
-		.enable_reg	= MAX14577_CHG_REG_CHG_CTRL2,
-		.enable_mask	= CHGCTRL2_MBCHOSTEN_MASK,
-	},
-	[MAX77836_LDO1] = {
-		.name		= "LDO1",
-		.of_match	= of_match_ptr("LDO1"),
-		.regulators_node = of_match_ptr("regulators"),
-		.id		= MAX77836_LDO1,
-		.ops		= &max77836_ldo_ops,
-		.type		= REGULATOR_VOLTAGE,
-		.owner		= THIS_MODULE,
-		.n_voltages	= MAX77836_REGULATOR_LDO_VOLTAGE_STEPS_NUM,
-		.min_uV		= MAX77836_REGULATOR_LDO_VOLTAGE_MIN,
-		.uV_step	= MAX77836_REGULATOR_LDO_VOLTAGE_STEP,
-		.enable_reg	= MAX77836_LDO_REG_CNFG1_LDO1,
-		.enable_mask	= MAX77836_CNFG1_LDO_PWRMD_MASK,
-		.vsel_reg	= MAX77836_LDO_REG_CNFG1_LDO1,
-		.vsel_mask	= MAX77836_CNFG1_LDO_TV_MASK,
-	},
-	[MAX77836_LDO2] = {
-		.name		= "LDO2",
-		.of_match	= of_match_ptr("LDO2"),
-		.regulators_node = of_match_ptr("regulators"),
-		.id		= MAX77836_LDO2,
-		.ops		= &max77836_ldo_ops,
-		.type		= REGULATOR_VOLTAGE,
-		.owner		= THIS_MODULE,
-		.n_voltages	= MAX77836_REGULATOR_LDO_VOLTAGE_STEPS_NUM,
-		.min_uV		= MAX77836_REGULATOR_LDO_VOLTAGE_MIN,
-		.uV_step	= MAX77836_REGULATOR_LDO_VOLTAGE_STEP,
-		.enable_reg	= MAX77836_LDO_REG_CNFG1_LDO2,
-		.enable_mask	= MAX77836_CNFG1_LDO_PWRMD_MASK,
-		.vsel_reg	= MAX77836_LDO_REG_CNFG1_LDO2,
-		.vsel_mask	= MAX77836_CNFG1_LDO_TV_MASK,
-	},
+	[MAX14577_SAFEOUT] = MAX14577_SAFEOUT_REG,
+	[MAX14577_CHARGER] = MAX14577_CHARGER_REG,
+	[MAX77836_LDO1] = MAX77836_LDO_REG(1),
+	[MAX77836_LDO2] = MAX77836_LDO_REG(2),
 };
 
 #ifdef CONFIG_OF
diff --git a/kernel/drivers/regulator/max1586.c b/kernel/drivers/regulator/max1586.c
index d2a8c64ca..2c1228d57 100644
--- a/kernel/drivers/regulator/max1586.c
+++ b/kernel/drivers/regulator/max1586.c
@@ -304,7 +304,6 @@ static struct i2c_driver max1586_pmic_driver = {
 	.probe = max1586_pmic_probe,
 	.driver		= {
 		.name	= "max1586",
-		.owner	= THIS_MODULE,
 		.of_match_table = of_match_ptr(max1586_of_match),
 	},
 	.id_table	= max1586_id,
diff --git a/kernel/drivers/regulator/max77686.c b/kernel/drivers/regulator/max77686.c
index c064e32fb..17ccf365a 100644
--- a/kernel/drivers/regulator/max77686.c
+++ b/kernel/drivers/regulator/max77686.c
@@ -2,7 +2,7 @@
  * max77686.c - Regulator driver for the Maxim 77686
  *
  * Copyright (C) 2012 Samsung Electronics
- * Chiwoong Byun <woong.byun@smasung.com>
+ * Chiwoong Byun <woong.byun@samsung.com>
  * Jonghwa Lee <jonghwa3.lee@samsung.com>
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/kernel/drivers/regulator/max77693.c b/kernel/drivers/regulator/max77693.c
index 9665a488e..de730fd3f 100644
--- a/kernel/drivers/regulator/max77693.c
+++ b/kernel/drivers/regulator/max77693.c
@@ -1,8 +1,9 @@
 /*
- * max77693.c - Regulator driver for the Maxim 77693
+ * max77693.c - Regulator driver for the Maxim 77693 and 77843
  *
- * Copyright (C) 2013 Samsung Electronics
+ * Copyright (C) 2013-2015 Samsung Electronics
  * Jonghwa Lee <jonghwa3.lee@samsung.com>
+ * Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -29,52 +30,64 @@
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
 #include <linux/mfd/max77693.h>
+#include <linux/mfd/max77693-common.h>
 #include <linux/mfd/max77693-private.h>
+#include <linux/mfd/max77843-private.h>
 #include <linux/regulator/of_regulator.h>
 #include <linux/regmap.h>
 
-#define CHGIN_ILIM_STEP_20mA			20000
-
-/* CHARGER regulator ops */
-/* CHARGER regulator uses two bits for enabling */
-static int max77693_chg_is_enabled(struct regulator_dev *rdev)
-{
-	int ret;
-	unsigned int val;
+/*
+ * ID for MAX77843 regulators.
+ * There is no need for such for MAX77693.
+ */
+enum max77843_regulator_type {
+	MAX77843_SAFEOUT1 = 0,
+	MAX77843_SAFEOUT2,
+	MAX77843_CHARGER,
 
-	ret = regmap_read(rdev->regmap, rdev->desc->enable_reg, &val);
-	if (ret)
-		return ret;
+	MAX77843_NUM,
+};
 
-	return (val & rdev->desc->enable_mask) == rdev->desc->enable_mask;
-}
+/* Register differences between chargers: MAX77693 and MAX77843 */
+struct chg_reg_data {
+	unsigned int linear_reg;
+	unsigned int linear_mask;
+	unsigned int uA_step;
+	unsigned int min_sel;
+};
 
 /*
- * CHARGER regulator - Min : 20mA, Max : 2580mA, step : 20mA
+ * MAX77693 CHARGER regulator - Min : 20mA, Max : 2580mA, step : 20mA
  * 0x00, 0x01, 0x2, 0x03	= 60 mA
  * 0x04 ~ 0x7E			= (60 + (X - 3) * 20) mA
+ * Actually for MAX77693 the driver manipulates the maximum input current,
+ * not the fast charge current (output). This should be fixed.
+ *
+ * On MAX77843 the calculation formula is the same (except values).
+ * Fortunately it properly manipulates the fast charge current.
  */
 static int max77693_chg_get_current_limit(struct regulator_dev *rdev)
 {
+	const struct chg_reg_data *reg_data = rdev_get_drvdata(rdev);
 	unsigned int chg_min_uA = rdev->constraints->min_uA;
 	unsigned int chg_max_uA = rdev->constraints->max_uA;
 	unsigned int reg, sel;
 	unsigned int val;
 	int ret;
 
-	ret = regmap_read(rdev->regmap, MAX77693_CHG_REG_CHG_CNFG_09, &reg);
+	ret = regmap_read(rdev->regmap, reg_data->linear_reg, &reg);
 	if (ret < 0)
 		return ret;
 
-	sel = reg & CHG_CNFG_09_CHGIN_ILIM_MASK;
+	sel = reg & reg_data->linear_mask;
 
 	/* the first four codes for charger current are all 60mA */
-	if (sel <= 3)
+	if (sel <= reg_data->min_sel)
 		sel = 0;
 	else
-		sel -= 3;
+		sel -= reg_data->min_sel;
 
-	val = chg_min_uA + CHGIN_ILIM_STEP_20mA * sel;
+	val = chg_min_uA + reg_data->uA_step * sel;
 	if (val > chg_max_uA)
 		return -EINVAL;
 
@@ -84,23 +97,43 @@ static int max77693_chg_get_current_limit(struct regulator_dev *rdev)
 static int max77693_chg_set_current_limit(struct regulator_dev *rdev,
 						int min_uA, int max_uA)
 {
+	const struct chg_reg_data *reg_data = rdev_get_drvdata(rdev);
 	unsigned int chg_min_uA = rdev->constraints->min_uA;
 	int sel = 0;
 
-	while (chg_min_uA + CHGIN_ILIM_STEP_20mA * sel < min_uA)
+	while (chg_min_uA + reg_data->uA_step * sel < min_uA)
 		sel++;
 
-	if (chg_min_uA + CHGIN_ILIM_STEP_20mA * sel > max_uA)
+	if (chg_min_uA + reg_data->uA_step * sel > max_uA)
 		return -EINVAL;
 
 	/* the first four codes for charger current are all 60mA */
-	sel += 3;
+	sel += reg_data->min_sel;
 
-	return regmap_write(rdev->regmap,
-				MAX77693_CHG_REG_CHG_CNFG_09, sel);
+	return regmap_write(rdev->regmap, reg_data->linear_reg, sel);
 }
 /* end of CHARGER regulator ops */
 
+/* Returns regmap suitable for given regulator on chosen device */
+static struct regmap *max77693_get_regmap(enum max77693_types type,
+					  struct max77693_dev *max77693,
+					  int reg_id)
+{
+	if (type == TYPE_MAX77693)
+		return max77693->regmap;
+
+	/* Else: TYPE_MAX77843 */
+	switch (reg_id) {
+	case MAX77843_SAFEOUT1:
+	case MAX77843_SAFEOUT2:
+		return max77693->regmap;
+	case MAX77843_CHARGER:
+		return max77693->regmap_chg;
+	default:
+		return max77693->regmap;
+	}
+}
+
 static const unsigned int max77693_safeout_table[] = {
 	4850000,
 	4900000,
@@ -118,14 +151,14 @@ static struct regulator_ops max77693_safeout_ops = {
 };
 
 static struct regulator_ops max77693_charger_ops = {
-	.is_enabled		= max77693_chg_is_enabled,
+	.is_enabled		= regulator_is_enabled_regmap,
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
 	.get_current_limit	= max77693_chg_get_current_limit,
 	.set_current_limit	= max77693_chg_set_current_limit,
 };
 
-#define regulator_desc_esafeout(_num)	{			\
+#define max77693_regulator_desc_esafeout(_num)	{		\
 	.name		= "ESAFEOUT"#_num,			\
 	.id		= MAX77693_ESAFEOUT##_num,		\
 	.of_match	= of_match_ptr("ESAFEOUT"#_num),	\
@@ -141,9 +174,9 @@ static struct regulator_ops max77693_charger_ops = {
 	.enable_mask	= SAFEOUT_CTRL_ENSAFEOUT##_num##_MASK ,	\
 }
 
-static const struct regulator_desc regulators[] = {
-	regulator_desc_esafeout(1),
-	regulator_desc_esafeout(2),
+static const struct regulator_desc max77693_supported_regulators[] = {
+	max77693_regulator_desc_esafeout(1),
+	max77693_regulator_desc_esafeout(2),
 	{
 		.name = "CHARGER",
 		.id = MAX77693_CHARGER,
@@ -155,21 +188,90 @@ static const struct regulator_desc regulators[] = {
 		.enable_reg = MAX77693_CHG_REG_CHG_CNFG_00,
 		.enable_mask = CHG_CNFG_00_CHG_MASK |
 				CHG_CNFG_00_BUCK_MASK,
+		.enable_val = CHG_CNFG_00_CHG_MASK | CHG_CNFG_00_BUCK_MASK,
 	},
 };
 
+static const struct chg_reg_data max77693_chg_reg_data = {
+	.linear_reg	= MAX77693_CHG_REG_CHG_CNFG_09,
+	.linear_mask	= CHG_CNFG_09_CHGIN_ILIM_MASK,
+	.uA_step	= 20000,
+	.min_sel	= 3,
+};
+
+#define	max77843_regulator_desc_esafeout(num)	{			\
+	.name		= "SAFEOUT" # num,				\
+	.id		= MAX77843_SAFEOUT ## num,			\
+	.ops		= &max77693_safeout_ops,			\
+	.of_match	= of_match_ptr("SAFEOUT" # num),		\
+	.regulators_node = of_match_ptr("regulators"),			\
+	.type		= REGULATOR_VOLTAGE,				\
+	.owner		= THIS_MODULE,					\
+	.n_voltages	= ARRAY_SIZE(max77693_safeout_table),		\
+	.volt_table	= max77693_safeout_table,			\
+	.enable_reg	= MAX77843_SYS_REG_SAFEOUTCTRL,			\
+	.enable_mask	= MAX77843_REG_SAFEOUTCTRL_ENSAFEOUT ## num,	\
+	.vsel_reg	= MAX77843_SYS_REG_SAFEOUTCTRL,			\
+	.vsel_mask	= MAX77843_REG_SAFEOUTCTRL_SAFEOUT ## num ## _MASK, \
+}
+
+static const struct regulator_desc max77843_supported_regulators[] = {
+	[MAX77843_SAFEOUT1] = max77843_regulator_desc_esafeout(1),
+	[MAX77843_SAFEOUT2] = max77843_regulator_desc_esafeout(2),
+	[MAX77843_CHARGER] = {
+		.name		= "CHARGER",
+		.id		= MAX77843_CHARGER,
+		.ops		= &max77693_charger_ops,
+		.of_match	= of_match_ptr("CHARGER"),
+		.regulators_node = of_match_ptr("regulators"),
+		.type		= REGULATOR_CURRENT,
+		.owner		= THIS_MODULE,
+		.enable_reg	= MAX77843_CHG_REG_CHG_CNFG_00,
+		.enable_mask	= MAX77843_CHG_MASK,
+		.enable_val	= MAX77843_CHG_MASK,
+	},
+};
+
+static const struct chg_reg_data max77843_chg_reg_data = {
+	.linear_reg	= MAX77843_CHG_REG_CHG_CNFG_02,
+	.linear_mask	= MAX77843_CHG_FAST_CHG_CURRENT_MASK,
+	.uA_step	= MAX77843_CHG_FAST_CHG_CURRENT_STEP,
+	.min_sel	= 2,
+};
+
 static int max77693_pmic_probe(struct platform_device *pdev)
 {
+	enum max77693_types type = platform_get_device_id(pdev)->driver_data;
 	struct max77693_dev *iodev = dev_get_drvdata(pdev->dev.parent);
+	const struct regulator_desc *regulators;
+	unsigned int regulators_size;
 	int i;
 	struct regulator_config config = { };
 
 	config.dev = iodev->dev;
-	config.regmap = iodev->regmap;
 
-	for (i = 0; i < ARRAY_SIZE(regulators); i++) {
+	switch (type) {
+	case TYPE_MAX77693:
+		regulators = max77693_supported_regulators;
+		regulators_size = ARRAY_SIZE(max77693_supported_regulators);
+		config.driver_data = (void *)&max77693_chg_reg_data;
+		break;
+	case TYPE_MAX77843:
+		regulators = max77843_supported_regulators;
+		regulators_size = ARRAY_SIZE(max77843_supported_regulators);
+		config.driver_data = (void *)&max77843_chg_reg_data;
+		break;
+	default:
+		dev_err(&pdev->dev, "Unsupported device type: %u\n", type);
+		return -ENODEV;
+	}
+
+	for (i = 0; i < regulators_size; i++) {
 		struct regulator_dev *rdev;
 
+		config.regmap = max77693_get_regmap(type, iodev,
+						    regulators[i].id);
+
 		rdev = devm_regulator_register(&pdev->dev,
 						&regulators[i], &config);
 		if (IS_ERR(rdev)) {
@@ -183,7 +285,8 @@ static int max77693_pmic_probe(struct platform_device *pdev)
 }
 
 static const struct platform_device_id max77693_pmic_id[] = {
-	{"max77693-pmic", 0},
+	{ "max77693-pmic", TYPE_MAX77693 },
+	{ "max77843-regulator", TYPE_MAX77843 },
 	{},
 };
 
@@ -197,8 +300,19 @@ static struct platform_driver max77693_pmic_driver = {
 	.id_table = max77693_pmic_id,
 };
 
-module_platform_driver(max77693_pmic_driver);
+static int __init max77693_pmic_init(void)
+{
+	return platform_driver_register(&max77693_pmic_driver);
+}
+subsys_initcall(max77693_pmic_init);
+
+static void __exit max77693_pmic_cleanup(void)
+{
+	platform_driver_unregister(&max77693_pmic_driver);
+}
+module_exit(max77693_pmic_cleanup);
 
-MODULE_DESCRIPTION("MAXIM MAX77693 regulator driver");
+MODULE_DESCRIPTION("MAXIM 77693/77843 regulator driver");
 MODULE_AUTHOR("Jonghwa Lee <jonghwa3.lee@samsung.com>");
+MODULE_AUTHOR("Krzysztof Kozlowski <k.kozlowski.k@gmail.com>");
 MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/regulator/max77802.c b/kernel/drivers/regulator/max77802.c
index 6af41abcc..c07ee13bd 100644
--- a/kernel/drivers/regulator/max77802.c
+++ b/kernel/drivers/regulator/max77802.c
@@ -27,6 +27,7 @@
 #include <linux/gpio.h>
 #include <linux/slab.h>
 #include <linux/gpio/consumer.h>
+#include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
diff --git a/kernel/drivers/regulator/max77843.c b/kernel/drivers/regulator/max77843.c
deleted file mode 100644
index c132ef527..000000000
--- a/kernel/drivers/regulator/max77843.c
+++ /dev/null
@@ -1,227 +0,0 @@
-/*
- * max77843.c - Regulator driver for the Maxim MAX77843
- *
- * Copyright (C) 2015 Samsung Electronics
- * Author: Jaewon Kim <jaewon02.kim@samsung.com>
- * Author: Beomho Seo <beomho.seo@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/driver.h>
-#include <linux/regulator/machine.h>
-#include <linux/mfd/max77843-private.h>
-#include <linux/regulator/of_regulator.h>
-
-enum max77843_regulator_type {
-	MAX77843_SAFEOUT1 = 0,
-	MAX77843_SAFEOUT2,
-	MAX77843_CHARGER,
-
-	MAX77843_NUM,
-};
-
-static const unsigned int max77843_safeout_voltage_table[] = {
-	4850000,
-	4900000,
-	4950000,
-	3300000,
-};
-
-static int max77843_reg_is_enabled(struct regulator_dev *rdev)
-{
-	struct regmap *regmap = rdev->regmap;
-	int ret;
-	unsigned int reg;
-
-	ret = regmap_read(regmap, rdev->desc->enable_reg, &reg);
-	if (ret) {
-		dev_err(&rdev->dev, "Fialed to read charger register\n");
-		return ret;
-	}
-
-	return (reg & rdev->desc->enable_mask) == rdev->desc->enable_mask;
-}
-
-static int max77843_reg_get_current_limit(struct regulator_dev *rdev)
-{
-	struct regmap *regmap = rdev->regmap;
-	unsigned int chg_min_uA = rdev->constraints->min_uA;
-	unsigned int chg_max_uA = rdev->constraints->max_uA;
-	unsigned int val;
-	int ret;
-	unsigned int reg, sel;
-
-	ret = regmap_read(regmap, MAX77843_CHG_REG_CHG_CNFG_02, &reg);
-	if (ret) {
-		dev_err(&rdev->dev, "Failed to read charger register\n");
-		return ret;
-	}
-
-	sel = reg & MAX77843_CHG_FAST_CHG_CURRENT_MASK;
-
-	if (sel < 0x03)
-		sel = 0;
-	else
-		sel -= 2;
-
-	val = chg_min_uA + MAX77843_CHG_FAST_CHG_CURRENT_STEP * sel;
-	if (val > chg_max_uA)
-		return -EINVAL;
-
-	return val;
-}
-
-static int max77843_reg_set_current_limit(struct regulator_dev *rdev,
-		int min_uA, int max_uA)
-{
-	struct regmap *regmap = rdev->regmap;
-	unsigned int chg_min_uA = rdev->constraints->min_uA;
-	int sel = 0;
-
-	while (chg_min_uA + MAX77843_CHG_FAST_CHG_CURRENT_STEP * sel < min_uA)
-		sel++;
-
-	if (chg_min_uA + MAX77843_CHG_FAST_CHG_CURRENT_STEP * sel > max_uA)
-		return -EINVAL;
-
-	sel += 2;
-
-	return regmap_write(regmap, MAX77843_CHG_REG_CHG_CNFG_02, sel);
-}
-
-static struct regulator_ops max77843_charger_ops = {
-	.is_enabled		= max77843_reg_is_enabled,
-	.enable			= regulator_enable_regmap,
-	.disable		= regulator_disable_regmap,
-	.get_current_limit	= max77843_reg_get_current_limit,
-	.set_current_limit	= max77843_reg_set_current_limit,
-};
-
-static struct regulator_ops max77843_regulator_ops = {
-	.is_enabled             = regulator_is_enabled_regmap,
-	.enable                 = regulator_enable_regmap,
-	.disable                = regulator_disable_regmap,
-	.list_voltage		= regulator_list_voltage_table,
-	.get_voltage_sel        = regulator_get_voltage_sel_regmap,
-	.set_voltage_sel        = regulator_set_voltage_sel_regmap,
-};
-
-static const struct regulator_desc max77843_supported_regulators[] = {
-	[MAX77843_SAFEOUT1] = {
-		.name		= "SAFEOUT1",
-		.id		= MAX77843_SAFEOUT1,
-		.ops		= &max77843_regulator_ops,
-		.of_match	= of_match_ptr("SAFEOUT1"),
-		.regulators_node = of_match_ptr("regulators"),
-		.type		= REGULATOR_VOLTAGE,
-		.owner		= THIS_MODULE,
-		.n_voltages	= ARRAY_SIZE(max77843_safeout_voltage_table),
-		.volt_table	= max77843_safeout_voltage_table,
-		.enable_reg	= MAX77843_SYS_REG_SAFEOUTCTRL,
-		.enable_mask	= MAX77843_REG_SAFEOUTCTRL_ENSAFEOUT1,
-		.vsel_reg	= MAX77843_SYS_REG_SAFEOUTCTRL,
-		.vsel_mask	= MAX77843_REG_SAFEOUTCTRL_SAFEOUT1_MASK,
-	},
-	[MAX77843_SAFEOUT2] = {
-		.name           = "SAFEOUT2",
-		.id             = MAX77843_SAFEOUT2,
-		.ops            = &max77843_regulator_ops,
-		.of_match	= of_match_ptr("SAFEOUT2"),
-		.regulators_node = of_match_ptr("regulators"),
-		.type           = REGULATOR_VOLTAGE,
-		.owner          = THIS_MODULE,
-		.n_voltages	= ARRAY_SIZE(max77843_safeout_voltage_table),
-		.volt_table	= max77843_safeout_voltage_table,
-		.enable_reg     = MAX77843_SYS_REG_SAFEOUTCTRL,
-		.enable_mask    = MAX77843_REG_SAFEOUTCTRL_ENSAFEOUT2,
-		.vsel_reg	= MAX77843_SYS_REG_SAFEOUTCTRL,
-		.vsel_mask	= MAX77843_REG_SAFEOUTCTRL_SAFEOUT2_MASK,
-	},
-	[MAX77843_CHARGER] = {
-		.name		= "CHARGER",
-		.id		= MAX77843_CHARGER,
-		.ops		= &max77843_charger_ops,
-		.of_match	= of_match_ptr("CHARGER"),
-		.regulators_node = of_match_ptr("regulators"),
-		.type		= REGULATOR_CURRENT,
-		.owner		= THIS_MODULE,
-		.enable_reg	= MAX77843_CHG_REG_CHG_CNFG_00,
-		.enable_mask	= MAX77843_CHG_MASK,
-	},
-};
-
-static struct regmap *max77843_get_regmap(struct max77843 *max77843, int reg_id)
-{
-	switch (reg_id) {
-	case MAX77843_SAFEOUT1:
-	case MAX77843_SAFEOUT2:
-		return max77843->regmap;
-	case MAX77843_CHARGER:
-		return max77843->regmap_chg;
-	default:
-		return max77843->regmap;
-	}
-}
-
-static int max77843_regulator_probe(struct platform_device *pdev)
-{
-	struct max77843 *max77843 = dev_get_drvdata(pdev->dev.parent);
-	struct regulator_config config = {};
-	int i;
-
-	config.dev = max77843->dev;
-	config.driver_data = max77843;
-
-	for (i = 0; i < ARRAY_SIZE(max77843_supported_regulators); i++) {
-		struct regulator_dev *regulator;
-
-		config.regmap = max77843_get_regmap(max77843,
-				max77843_supported_regulators[i].id);
-
-		regulator = devm_regulator_register(&pdev->dev,
-				&max77843_supported_regulators[i], &config);
-		if (IS_ERR(regulator)) {
-			dev_err(&pdev->dev,
-					"Failed to regiser regulator-%d\n", i);
-			return PTR_ERR(regulator);
-		}
-	}
-
-	return 0;
-}
-
-static const struct platform_device_id max77843_regulator_id[] = {
-	{ "max77843-regulator", },
-	{ /* sentinel */ },
-};
-
-static struct platform_driver max77843_regulator_driver = {
-	.driver	= {
-		.name = "max77843-regulator",
-	},
-	.probe		= max77843_regulator_probe,
-	.id_table	= max77843_regulator_id,
-};
-
-static int __init max77843_regulator_init(void)
-{
-	return platform_driver_register(&max77843_regulator_driver);
-}
-subsys_initcall(max77843_regulator_init);
-
-static void __exit max77843_regulator_exit(void)
-{
-	platform_driver_unregister(&max77843_regulator_driver);
-}
-module_exit(max77843_regulator_exit);
-
-MODULE_AUTHOR("Jaewon Kim <jaewon02.kim@samsung.com>");
-MODULE_AUTHOR("Beomho Seo <beomho.seo@samsung.com>");
-MODULE_DESCRIPTION("Maxim MAX77843 regulator driver");
-MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/regulator/max8660.c b/kernel/drivers/regulator/max8660.c
index 4071d74fa..b87f62dd4 100644
--- a/kernel/drivers/regulator/max8660.c
+++ b/kernel/drivers/regulator/max8660.c
@@ -518,7 +518,6 @@ static struct i2c_driver max8660_driver = {
 	.probe = max8660_probe,
 	.driver		= {
 		.name	= "max8660",
-		.owner	= THIS_MODULE,
 	},
 	.id_table	= max8660_id,
 };
diff --git a/kernel/drivers/regulator/max8973-regulator.c b/kernel/drivers/regulator/max8973-regulator.c
index c3d55c2db..5b75b7c2e 100644
--- a/kernel/drivers/regulator/max8973-regulator.c
+++ b/kernel/drivers/regulator/max8973-regulator.c
@@ -27,12 +27,14 @@
 #include <linux/init.h>
 #include <linux/err.h>
 #include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/max8973-regulator.h>
 #include <linux/regulator/of_regulator.h>
 #include <linux/gpio.h>
+#include <linux/of_gpio.h>
 #include <linux/i2c.h>
 #include <linux/slab.h>
 #include <linux/regmap.h>
@@ -66,12 +68,14 @@
 #define MAX8973_RAMP_25mV_PER_US			0x1
 #define MAX8973_RAMP_50mV_PER_US			0x2
 #define MAX8973_RAMP_200mV_PER_US			0x3
+#define MAX8973_RAMP_MASK				0x3
 
 /* MAX8973_CONTROL2 */
 #define MAX8973_WDTMR_ENABLE				BIT(6)
 #define MAX8973_DISCH_ENBABLE				BIT(5)
 #define MAX8973_FT_ENABLE				BIT(4)
 
+#define MAX8973_CKKADV_TRIP_MASK			0xC
 #define MAX8973_CKKADV_TRIP_DISABLE			0xC
 #define MAX8973_CKKADV_TRIP_75mV_PER_US			0x0
 #define MAX8973_CKKADV_TRIP_150mV_PER_US		0x4
@@ -89,19 +93,25 @@
 #define MAX8973_VOLATGE_STEP				6250
 #define MAX8973_BUCK_N_VOLTAGE				0x80
 
+enum device_id {
+	MAX8973,
+	MAX77621
+};
+
 /* Maxim 8973 chip information */
 struct max8973_chip {
 	struct device *dev;
 	struct regulator_desc desc;
 	struct regmap *regmap;
 	bool enable_external_control;
+	int enable_gpio;
 	int dvs_gpio;
 	int lru_index[MAX8973_MAX_VOUT_REG];
 	int curr_vout_val[MAX8973_MAX_VOUT_REG];
 	int curr_vout_reg;
 	int curr_gpio_val;
-	bool valid_dvs_gpio;
 	struct regulator_ops ops;
+	enum device_id id;
 };
 
 /*
@@ -174,7 +184,7 @@ static int max8973_dcdc_set_voltage_sel(struct regulator_dev *rdev,
 	 * If gpios are available to select the VOUT register then least
 	 * recently used register for new configuration.
 	 */
-	if (max->valid_dvs_gpio)
+	if (gpio_is_valid(max->dvs_gpio))
 		found = find_voltage_set_register(max, vsel,
 					&vout_reg, &gpio_val);
 
@@ -191,7 +201,7 @@ static int max8973_dcdc_set_voltage_sel(struct regulator_dev *rdev,
 	}
 
 	/* Select proper VOUT register vio gpios */
-	if (max->valid_dvs_gpio) {
+	if (gpio_is_valid(max->dvs_gpio)) {
 		gpio_set_value_cansleep(max->dvs_gpio, gpio_val & 0x1);
 		max->curr_gpio_val = gpio_val;
 	}
@@ -242,12 +252,94 @@ static unsigned int max8973_dcdc_get_mode(struct regulator_dev *rdev)
 		REGULATOR_MODE_FAST : REGULATOR_MODE_NORMAL;
 }
 
+static int max8973_set_ramp_delay(struct regulator_dev *rdev,
+		int ramp_delay)
+{
+	struct max8973_chip *max = rdev_get_drvdata(rdev);
+	unsigned int control;
+	int ret;
+	int ret_val;
+
+	/* Set ramp delay */
+	if (ramp_delay < 25000) {
+		control = MAX8973_RAMP_12mV_PER_US;
+		ret_val = 12000;
+	} else if (ramp_delay < 50000) {
+		control = MAX8973_RAMP_25mV_PER_US;
+		ret_val = 25000;
+	} else if (ramp_delay < 200000) {
+		control = MAX8973_RAMP_50mV_PER_US;
+		ret_val = 50000;
+	} else {
+		control = MAX8973_RAMP_200mV_PER_US;
+		ret_val = 200000;
+	}
+
+	ret = regmap_update_bits(max->regmap, MAX8973_CONTROL1,
+			MAX8973_RAMP_MASK, control);
+	if (ret < 0)
+		dev_err(max->dev, "register %d update failed, %d",
+				MAX8973_CONTROL1, ret);
+	return ret;
+}
+
+static int max8973_set_current_limit(struct regulator_dev *rdev,
+		int min_ua, int max_ua)
+{
+	struct max8973_chip *max = rdev_get_drvdata(rdev);
+	unsigned int val;
+	int ret;
+
+	if (max_ua <= 9000000)
+		val = MAX8973_CKKADV_TRIP_75mV_PER_US;
+	else if (max_ua <= 12000000)
+		val = MAX8973_CKKADV_TRIP_150mV_PER_US;
+	else
+		val = MAX8973_CKKADV_TRIP_DISABLE;
+
+	ret = regmap_update_bits(max->regmap, MAX8973_CONTROL2,
+			MAX8973_CKKADV_TRIP_MASK, val);
+	if (ret < 0) {
+		dev_err(max->dev, "register %d update failed: %d\n",
+				MAX8973_CONTROL2, ret);
+		return ret;
+	}
+	return 0;
+}
+
+static int max8973_get_current_limit(struct regulator_dev *rdev)
+{
+	struct max8973_chip *max = rdev_get_drvdata(rdev);
+	unsigned int control2;
+	int ret;
+
+	ret = regmap_read(max->regmap, MAX8973_CONTROL2, &control2);
+	if (ret < 0) {
+		dev_err(max->dev, "register %d read failed: %d\n",
+				MAX8973_CONTROL2, ret);
+		return ret;
+	}
+	switch (control2 & MAX8973_CKKADV_TRIP_MASK) {
+	case MAX8973_CKKADV_TRIP_DISABLE:
+		return 15000000;
+	case MAX8973_CKKADV_TRIP_150mV_PER_US:
+		return 12000000;
+	case MAX8973_CKKADV_TRIP_75mV_PER_US:
+		return 9000000;
+	default:
+		break;
+	}
+	return 9000000;
+}
+
 static const struct regulator_ops max8973_dcdc_ops = {
 	.get_voltage_sel	= max8973_dcdc_get_voltage_sel,
 	.set_voltage_sel	= max8973_dcdc_set_voltage_sel,
 	.list_voltage		= regulator_list_voltage_linear,
 	.set_mode		= max8973_dcdc_set_mode,
 	.get_mode		= max8973_dcdc_get_mode,
+	.set_voltage_time_sel	= regulator_set_voltage_time_sel,
+	.set_ramp_delay		= max8973_set_ramp_delay,
 };
 
 static int max8973_init_dcdc(struct max8973_chip *max,
@@ -256,6 +348,29 @@ static int max8973_init_dcdc(struct max8973_chip *max,
 	int ret;
 	uint8_t	control1 = 0;
 	uint8_t control2 = 0;
+	unsigned int data;
+
+	ret = regmap_read(max->regmap, MAX8973_CONTROL1, &data);
+	if (ret < 0) {
+		dev_err(max->dev, "register %d read failed, err = %d",
+				MAX8973_CONTROL1, ret);
+		return ret;
+	}
+	control1 = data & MAX8973_RAMP_MASK;
+	switch (control1) {
+	case MAX8973_RAMP_12mV_PER_US:
+		max->desc.ramp_delay = 12000;
+		break;
+	case MAX8973_RAMP_25mV_PER_US:
+		max->desc.ramp_delay = 25000;
+		break;
+	case MAX8973_RAMP_50mV_PER_US:
+		max->desc.ramp_delay = 50000;
+		break;
+	case MAX8973_RAMP_200mV_PER_US:
+		max->desc.ramp_delay = 200000;
+		break;
+	}
 
 	if (pdata->control_flags & MAX8973_CONTROL_REMOTE_SENSE_ENABLE)
 		control1 |= MAX8973_SNS_ENABLE;
@@ -266,28 +381,16 @@ static int max8973_init_dcdc(struct max8973_chip *max,
 	if (pdata->control_flags & MAX8973_CONTROL_OUTPUT_ACTIVE_DISCH_ENABLE)
 		control1 |= MAX8973_AD_ENABLE;
 
-	if (pdata->control_flags & MAX8973_CONTROL_BIAS_ENABLE)
+	if (pdata->control_flags & MAX8973_CONTROL_BIAS_ENABLE) {
 		control1 |= MAX8973_BIAS_ENABLE;
+		max->desc.enable_time = 20;
+	} else {
+		max->desc.enable_time = 240;
+	}
 
 	if (pdata->control_flags & MAX8973_CONTROL_FREQ_SHIFT_9PER_ENABLE)
 		control1 |= MAX8973_FREQSHIFT_9PER;
 
-	/* Set ramp delay */
-	if (pdata->reg_init_data &&
-			pdata->reg_init_data->constraints.ramp_delay) {
-		if (pdata->reg_init_data->constraints.ramp_delay < 25000)
-			control1 |= MAX8973_RAMP_12mV_PER_US;
-		else if (pdata->reg_init_data->constraints.ramp_delay < 50000)
-			control1 |= MAX8973_RAMP_25mV_PER_US;
-		else if (pdata->reg_init_data->constraints.ramp_delay < 200000)
-			control1 |= MAX8973_RAMP_50mV_PER_US;
-		else
-			control1 |= MAX8973_RAMP_200mV_PER_US;
-	} else {
-		control1 |= MAX8973_RAMP_12mV_PER_US;
-		max->desc.ramp_delay = 12500;
-	}
-
 	if (!(pdata->control_flags & MAX8973_CONTROL_PULL_DOWN_ENABLE))
 		control2 |= MAX8973_DISCH_ENBABLE;
 
@@ -344,7 +447,7 @@ static int max8973_init_dcdc(struct max8973_chip *max,
 	}
 
 	/* If external control is enabled then disable EN bit */
-	if (max->enable_external_control) {
+	if (max->enable_external_control && (max->id == MAX8973)) {
 		ret = regmap_update_bits(max->regmap, MAX8973_VOUT,
 						MAX8973_VOUT_ENABLE, 0);
 		if (ret < 0)
@@ -361,22 +464,101 @@ static const struct regmap_config max8973_regmap_config = {
 	.cache_type		= REGCACHE_RBTREE,
 };
 
+static struct max8973_regulator_platform_data *max8973_parse_dt(
+		struct device *dev)
+{
+	struct max8973_regulator_platform_data *pdata;
+	struct device_node *np = dev->of_node;
+	int ret;
+	u32 pval;
+	bool etr_enable;
+	bool etr_sensitivity_high;
+
+	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return NULL;
+
+	pdata->enable_ext_control = of_property_read_bool(np,
+						"maxim,externally-enable");
+	pdata->enable_gpio = of_get_named_gpio(np, "maxim,enable-gpio", 0);
+	pdata->dvs_gpio = of_get_named_gpio(np, "maxim,dvs-gpio", 0);
+
+	ret = of_property_read_u32(np, "maxim,dvs-default-state", &pval);
+	if (!ret)
+		pdata->dvs_def_state = pval;
+
+	if (of_property_read_bool(np, "maxim,enable-remote-sense"))
+		pdata->control_flags  |= MAX8973_CONTROL_REMOTE_SENSE_ENABLE;
+
+	if (of_property_read_bool(np, "maxim,enable-falling-slew-rate"))
+		pdata->control_flags  |=
+				MAX8973_CONTROL_FALLING_SLEW_RATE_ENABLE;
+
+	if (of_property_read_bool(np, "maxim,enable-active-discharge"))
+		pdata->control_flags  |=
+				MAX8973_CONTROL_OUTPUT_ACTIVE_DISCH_ENABLE;
+
+	if (of_property_read_bool(np, "maxim,enable-frequency-shift"))
+		pdata->control_flags  |= MAX8973_CONTROL_FREQ_SHIFT_9PER_ENABLE;
+
+	if (of_property_read_bool(np, "maxim,enable-bias-control"))
+		pdata->control_flags  |= MAX8973_CONTROL_BIAS_ENABLE;
+
+	etr_enable = of_property_read_bool(np, "maxim,enable-etr");
+	etr_sensitivity_high = of_property_read_bool(np,
+				"maxim,enable-high-etr-sensitivity");
+	if (etr_sensitivity_high)
+		etr_enable = true;
+
+	if (etr_enable) {
+		if (etr_sensitivity_high)
+			pdata->control_flags |=
+				MAX8973_CONTROL_CLKADV_TRIP_75mV_PER_US;
+		else
+			pdata->control_flags |=
+				MAX8973_CONTROL_CLKADV_TRIP_150mV_PER_US;
+	} else {
+		pdata->control_flags |= MAX8973_CONTROL_CLKADV_TRIP_DISABLED;
+	}
+
+	return pdata;
+}
+
+static const struct of_device_id of_max8973_match_tbl[] = {
+	{ .compatible = "maxim,max8973", .data = (void *)MAX8973, },
+	{ .compatible = "maxim,max77621", .data = (void *)MAX77621, },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, of_max8973_match_tbl);
+
 static int max8973_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
 	struct max8973_regulator_platform_data *pdata;
+	struct regulator_init_data *ridata;
 	struct regulator_config config = { };
 	struct regulator_dev *rdev;
 	struct max8973_chip *max;
+	bool pdata_from_dt = false;
+	unsigned int chip_id;
 	int ret;
 
 	pdata = dev_get_platdata(&client->dev);
 
-	if (!pdata && !client->dev.of_node) {
+	if (!pdata && client->dev.of_node) {
+		pdata = max8973_parse_dt(&client->dev);
+		pdata_from_dt = true;
+	}
+
+	if (!pdata) {
 		dev_err(&client->dev, "No Platform data");
 		return -EIO;
 	}
 
+	if ((pdata->dvs_gpio == -EPROBE_DEFER) ||
+		(pdata->enable_gpio == -EPROBE_DEFER))
+		return -EPROBE_DEFER;
+
 	max = devm_kzalloc(&client->dev, sizeof(*max), GFP_KERNEL);
 	if (!max)
 		return -ENOMEM;
@@ -388,6 +570,27 @@ static int max8973_probe(struct i2c_client *client,
 		return ret;
 	}
 
+	if (client->dev.of_node) {
+		const struct of_device_id *match;
+
+		match = of_match_device(of_match_ptr(of_max8973_match_tbl),
+				&client->dev);
+		if (!match)
+			return -ENODATA;
+		max->id = (u32)((uintptr_t)match->data);
+	} else {
+		max->id = id->driver_data;
+	}
+
+	ret = regmap_read(max->regmap, MAX8973_CHIPID1, &chip_id);
+	if (ret < 0) {
+		dev_err(&client->dev, "register CHIPID1 read failed, %d", ret);
+		return ret;
+	}
+
+	dev_info(&client->dev, "CHIP-ID OTP: 0x%02x ID_M: 0x%02x\n",
+			(chip_id >> 4) & 0xF, (chip_id >> 1) & 0x7);
+
 	i2c_set_clientdata(client, max);
 	max->ops = max8973_dcdc_ops;
 	max->dev = &client->dev;
@@ -400,23 +603,14 @@ static int max8973_probe(struct i2c_client *client,
 	max->desc.uV_step = MAX8973_VOLATGE_STEP;
 	max->desc.n_voltages = MAX8973_BUCK_N_VOLTAGE;
 
-	if (!pdata || !pdata->enable_ext_control) {
-		max->desc.enable_reg = MAX8973_VOUT;
-		max->desc.enable_mask = MAX8973_VOUT_ENABLE;
-		max->ops.enable = regulator_enable_regmap;
-		max->ops.disable = regulator_disable_regmap;
-		max->ops.is_enabled = regulator_is_enabled_regmap;
-	}
+	max->dvs_gpio = (pdata->dvs_gpio) ? pdata->dvs_gpio : -EINVAL;
+	max->enable_gpio = (pdata->enable_gpio) ? pdata->enable_gpio : -EINVAL;
+	max->enable_external_control = pdata->enable_ext_control;
+	max->curr_gpio_val = pdata->dvs_def_state;
+	max->curr_vout_reg = MAX8973_VOUT + pdata->dvs_def_state;
 
-	if (pdata) {
-		max->dvs_gpio = pdata->dvs_gpio;
-		max->enable_external_control = pdata->enable_ext_control;
-		max->curr_gpio_val = pdata->dvs_def_state;
-		max->curr_vout_reg = MAX8973_VOUT + pdata->dvs_def_state;
-	} else {
-		max->dvs_gpio = -EINVAL;
-		max->curr_vout_reg = MAX8973_VOUT;
-	}
+	if (gpio_is_valid(max->enable_gpio))
+		max->enable_external_control = true;
 
 	max->lru_index[0] = max->curr_vout_reg;
 
@@ -434,7 +628,6 @@ static int max8973_probe(struct i2c_client *client,
 				max->dvs_gpio, ret);
 			return ret;
 		}
-		max->valid_dvs_gpio = true;
 
 		/*
 		 * Initialize the lru index with vout_reg id
@@ -445,21 +638,74 @@ static int max8973_probe(struct i2c_client *client,
 		max->lru_index[0] = max->curr_vout_reg;
 		max->lru_index[max->curr_vout_reg] = 0;
 	} else {
-		max->valid_dvs_gpio = false;
+		/*
+		 * If there is no DVS GPIO, the VOUT register
+		 * address is fixed.
+		 */
+		max->ops.set_voltage_sel = regulator_set_voltage_sel_regmap;
+		max->ops.get_voltage_sel = regulator_get_voltage_sel_regmap;
+		max->desc.vsel_reg = max->curr_vout_reg;
+		max->desc.vsel_mask = MAX8973_VOUT_MASK;
 	}
 
-	if (pdata) {
-		ret = max8973_init_dcdc(max, pdata);
-		if (ret < 0) {
-			dev_err(max->dev, "Max8973 Init failed, err = %d\n", ret);
-			return ret;
+	if (pdata_from_dt)
+		pdata->reg_init_data = of_get_regulator_init_data(&client->dev,
+					client->dev.of_node, &max->desc);
+
+	ridata = pdata->reg_init_data;
+	switch (max->id) {
+	case MAX8973:
+		if (!pdata->enable_ext_control) {
+			max->desc.enable_reg = MAX8973_VOUT;
+			max->desc.enable_mask = MAX8973_VOUT_ENABLE;
+			max->ops.enable = regulator_enable_regmap;
+			max->ops.disable = regulator_disable_regmap;
+			max->ops.is_enabled = regulator_is_enabled_regmap;
+			break;
+		}
+
+		if (gpio_is_valid(max->enable_gpio)) {
+			config.ena_gpio_flags = GPIOF_OUT_INIT_LOW;
+			if (ridata && (ridata->constraints.always_on ||
+					ridata->constraints.boot_on))
+				config.ena_gpio_flags = GPIOF_OUT_INIT_HIGH;
+			config.ena_gpio = max->enable_gpio;
+		}
+		break;
+
+	case MAX77621:
+		if (gpio_is_valid(max->enable_gpio)) {
+			ret = devm_gpio_request_one(&client->dev,
+					max->enable_gpio, GPIOF_OUT_INIT_HIGH,
+					"max8973-en-gpio");
+			if (ret) {
+				dev_err(&client->dev,
+					"gpio_request for gpio %d failed: %d\n",
+					max->enable_gpio, ret);
+				return ret;
+			}
 		}
+
+		max->desc.enable_reg = MAX8973_VOUT;
+		max->desc.enable_mask = MAX8973_VOUT_ENABLE;
+		max->ops.enable = regulator_enable_regmap;
+		max->ops.disable = regulator_disable_regmap;
+		max->ops.is_enabled = regulator_is_enabled_regmap;
+		max->ops.set_current_limit = max8973_set_current_limit;
+		max->ops.get_current_limit = max8973_get_current_limit;
+		break;
+	default:
+		break;
+	}
+
+	ret = max8973_init_dcdc(max, pdata);
+	if (ret < 0) {
+		dev_err(max->dev, "Max8973 Init failed, err = %d\n", ret);
+		return ret;
 	}
 
 	config.dev = &client->dev;
-	config.init_data = pdata ? pdata->reg_init_data :
-		of_get_regulator_init_data(&client->dev, client->dev.of_node,
-					   &max->desc);
+	config.init_data = pdata->reg_init_data;
 	config.driver_data = max;
 	config.of_node = client->dev.of_node;
 	config.regmap = max->regmap;
@@ -476,16 +722,16 @@ static int max8973_probe(struct i2c_client *client,
 }
 
 static const struct i2c_device_id max8973_id[] = {
-	{.name = "max8973",},
+	{.name = "max8973", .driver_data = MAX8973},
+	{.name = "max77621", .driver_data = MAX77621},
 	{},
 };
-
 MODULE_DEVICE_TABLE(i2c, max8973_id);
 
 static struct i2c_driver max8973_i2c_driver = {
 	.driver = {
 		.name = "max8973",
-		.owner = THIS_MODULE,
+		.of_match_table = of_max8973_match_tbl,
 	},
 	.probe = max8973_probe,
 	.id_table = max8973_id,
diff --git a/kernel/drivers/regulator/mt6311-regulator.c b/kernel/drivers/regulator/mt6311-regulator.c
new file mode 100644
index 000000000..02c4e5fec
--- /dev/null
+++ b/kernel/drivers/regulator/mt6311-regulator.c
@@ -0,0 +1,179 @@
+/*
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author: Henry Chen <henryc.chen@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/regulator/mt6311.h>
+#include <linux/slab.h>
+#include "mt6311-regulator.h"
+
+static const struct regmap_config mt6311_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = MT6311_FQMTR_CON4,
+};
+
+/* Default limits measured in millivolts and milliamps */
+#define MT6311_MIN_UV		600000
+#define MT6311_MAX_UV		1393750
+#define MT6311_STEP_UV		6250
+
+static const struct regulator_linear_range buck_volt_range[] = {
+	REGULATOR_LINEAR_RANGE(MT6311_MIN_UV, 0, 0x7f, MT6311_STEP_UV),
+};
+
+static const struct regulator_ops mt6311_buck_ops = {
+	.list_voltage = regulator_list_voltage_linear_range,
+	.map_voltage = regulator_map_voltage_linear_range,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+};
+
+static const struct regulator_ops mt6311_ldo_ops = {
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+};
+
+#define MT6311_BUCK(_id) \
+{\
+	.name = #_id,\
+	.ops = &mt6311_buck_ops,\
+	.of_match = of_match_ptr(#_id),\
+	.regulators_node = of_match_ptr("regulators"),\
+	.type = REGULATOR_VOLTAGE,\
+	.id = MT6311_ID_##_id,\
+	.n_voltages = (MT6311_MAX_UV - MT6311_MIN_UV) / MT6311_STEP_UV + 1,\
+	.min_uV = MT6311_MIN_UV,\
+	.uV_step = MT6311_STEP_UV,\
+	.owner = THIS_MODULE,\
+	.linear_ranges = buck_volt_range, \
+	.n_linear_ranges = ARRAY_SIZE(buck_volt_range), \
+	.enable_reg = MT6311_VDVFS11_CON9,\
+	.enable_mask = MT6311_PMIC_VDVFS11_EN_MASK,\
+	.vsel_reg = MT6311_VDVFS11_CON12,\
+	.vsel_mask = MT6311_PMIC_VDVFS11_VOSEL_MASK,\
+}
+
+#define MT6311_LDO(_id) \
+{\
+	.name = #_id,\
+	.ops = &mt6311_ldo_ops,\
+	.of_match = of_match_ptr(#_id),\
+	.regulators_node = of_match_ptr("regulators"),\
+	.type = REGULATOR_VOLTAGE,\
+	.id = MT6311_ID_##_id,\
+	.owner = THIS_MODULE,\
+	.enable_reg = MT6311_LDO_CON3,\
+	.enable_mask = MT6311_PMIC_RG_VBIASN_EN_MASK,\
+}
+
+static const struct regulator_desc mt6311_regulators[] = {
+	MT6311_BUCK(VDVFS),
+	MT6311_LDO(VBIASN),
+};
+
+/*
+ * I2C driver interface functions
+ */
+static int mt6311_i2c_probe(struct i2c_client *i2c,
+		const struct i2c_device_id *id)
+{
+	struct regulator_config config = { };
+	struct regulator_dev *rdev;
+	struct regmap *regmap;
+	int i, ret;
+	unsigned int data;
+
+	regmap = devm_regmap_init_i2c(i2c, &mt6311_regmap_config);
+	if (IS_ERR(regmap)) {
+		ret = PTR_ERR(regmap);
+		dev_err(&i2c->dev, "Failed to allocate register map: %d\n",
+			ret);
+		return ret;
+	}
+
+	ret = regmap_read(regmap, MT6311_SWCID, &data);
+	if (ret < 0) {
+		dev_err(&i2c->dev, "Failed to read DEVICE_ID reg: %d\n", ret);
+		return ret;
+	}
+
+	switch (data) {
+	case MT6311_E1_CID_CODE:
+	case MT6311_E2_CID_CODE:
+	case MT6311_E3_CID_CODE:
+		break;
+	default:
+		dev_err(&i2c->dev, "Unsupported device id = 0x%x.\n", data);
+		return -ENODEV;
+	}
+
+	for (i = 0; i < MT6311_MAX_REGULATORS; i++) {
+		config.dev = &i2c->dev;
+		config.regmap = regmap;
+
+		rdev = devm_regulator_register(&i2c->dev,
+			&mt6311_regulators[i], &config);
+		if (IS_ERR(rdev)) {
+			dev_err(&i2c->dev,
+				"Failed to register MT6311 regulator\n");
+			return PTR_ERR(rdev);
+		}
+	}
+
+	return 0;
+}
+
+static const struct i2c_device_id mt6311_i2c_id[] = {
+	{"mt6311", 0},
+	{},
+};
+MODULE_DEVICE_TABLE(i2c, mt6311_i2c_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id mt6311_dt_ids[] = {
+	{ .compatible = "mediatek,mt6311-regulator",
+	  .data = &mt6311_i2c_id[0] },
+	{},
+};
+MODULE_DEVICE_TABLE(of, mt6311_dt_ids);
+#endif
+
+static struct i2c_driver mt6311_regulator_driver = {
+	.driver = {
+		.name = "mt6311",
+		.of_match_table = of_match_ptr(mt6311_dt_ids),
+	},
+	.probe = mt6311_i2c_probe,
+	.id_table = mt6311_i2c_id,
+};
+
+module_i2c_driver(mt6311_regulator_driver);
+
+MODULE_AUTHOR("Henry Chen <henryc.chen@mediatek.com>");
+MODULE_DESCRIPTION("Regulator device driver for Mediatek MT6311");
+MODULE_LICENSE("GPL v2");
diff --git a/kernel/drivers/regulator/mt6311-regulator.h b/kernel/drivers/regulator/mt6311-regulator.h
new file mode 100644
index 000000000..5218db46a
--- /dev/null
+++ b/kernel/drivers/regulator/mt6311-regulator.h
@@ -0,0 +1,65 @@
+/*
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author: Henry Chen <henryc.chen@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MT6311_REGULATOR_H__
+#define __MT6311_REGULATOR_H__
+
+#define MT6311_SWCID              0x01
+
+#define MT6311_TOP_INT_CON        0x18
+#define MT6311_TOP_INT_MON        0x19
+
+#define MT6311_VDVFS11_CON0       0x87
+#define MT6311_VDVFS11_CON7       0x88
+#define MT6311_VDVFS11_CON8       0x89
+#define MT6311_VDVFS11_CON9       0x8A
+#define MT6311_VDVFS11_CON10      0x8B
+#define MT6311_VDVFS11_CON11      0x8C
+#define MT6311_VDVFS11_CON12      0x8D
+#define MT6311_VDVFS11_CON13      0x8E
+#define MT6311_VDVFS11_CON14      0x8F
+#define MT6311_VDVFS11_CON15      0x90
+#define MT6311_VDVFS11_CON16      0x91
+#define MT6311_VDVFS11_CON17      0x92
+#define MT6311_VDVFS11_CON18      0x93
+#define MT6311_VDVFS11_CON19      0x94
+
+#define MT6311_LDO_CON0           0xCC
+#define MT6311_LDO_OCFB0          0xCD
+#define MT6311_LDO_CON2           0xCE
+#define MT6311_LDO_CON3           0xCF
+#define MT6311_LDO_CON4           0xD0
+#define MT6311_FQMTR_CON0         0xD1
+#define MT6311_FQMTR_CON1         0xD2
+#define MT6311_FQMTR_CON2         0xD3
+#define MT6311_FQMTR_CON3         0xD4
+#define MT6311_FQMTR_CON4         0xD5
+
+#define MT6311_PMIC_RG_INT_POL_MASK                      0x1
+#define MT6311_PMIC_RG_INT_EN_MASK                       0x2
+#define MT6311_PMIC_RG_BUCK_OC_INT_STATUS_MASK           0x10
+
+#define MT6311_PMIC_VDVFS11_EN_CTRL_MASK                 0x1
+#define MT6311_PMIC_VDVFS11_VOSEL_CTRL_MASK              0x2
+#define MT6311_PMIC_VDVFS11_EN_SEL_MASK                  0x3
+#define MT6311_PMIC_VDVFS11_VOSEL_SEL_MASK               0xc
+#define MT6311_PMIC_VDVFS11_EN_MASK                      0x1
+#define MT6311_PMIC_VDVFS11_VOSEL_MASK                   0x7F
+#define MT6311_PMIC_VDVFS11_VOSEL_ON_MASK                0x7F
+#define MT6311_PMIC_VDVFS11_VOSEL_SLEEP_MASK             0x7F
+#define MT6311_PMIC_NI_VDVFS11_VOSEL_MASK                0x7F
+
+#define MT6311_PMIC_RG_VBIASN_EN_MASK                    0x1
+
+#endif
diff --git a/kernel/drivers/regulator/of_regulator.c b/kernel/drivers/regulator/of_regulator.c
index 24e812c48..499e437c7 100644
--- a/kernel/drivers/regulator/of_regulator.c
+++ b/kernel/drivers/regulator/of_regulator.c
@@ -58,6 +58,10 @@ static void of_get_regulation_constraints(struct device_node *np,
 	if (!of_property_read_u32(np, "regulator-max-microamp", &pval))
 		constraints->max_uA = pval;
 
+	if (!of_property_read_u32(np, "regulator-input-current-limit-microamp",
+				  &pval))
+		constraints->ilim_uA = pval;
+
 	/* Current change possible? */
 	if (constraints->min_uA != constraints->max_uA)
 		constraints->valid_ops_mask |= REGULATOR_CHANGE_CURRENT;
@@ -67,9 +71,14 @@ static void of_get_regulation_constraints(struct device_node *np,
 	if (!constraints->always_on) /* status change should be possible. */
 		constraints->valid_ops_mask |= REGULATOR_CHANGE_STATUS;
 
+	constraints->pull_down = of_property_read_bool(np, "regulator-pull-down");
+
 	if (of_property_read_bool(np, "regulator-allow-bypass"))
 		constraints->valid_ops_mask |= REGULATOR_CHANGE_BYPASS;
 
+	if (of_property_read_bool(np, "regulator-allow-set-load"))
+		constraints->valid_ops_mask |= REGULATOR_CHANGE_DRMS;
+
 	ret = of_property_read_u32(np, "regulator-ramp-delay", &pval);
 	if (!ret) {
 		if (pval)
@@ -82,6 +91,9 @@ static void of_get_regulation_constraints(struct device_node *np,
 	if (!ret)
 		constraints->enable_time = pval;
 
+	constraints->soft_start = of_property_read_bool(np,
+					"regulator-soft-start");
+
 	if (!of_property_read_u32(np, "regulator-initial-mode", &pval)) {
 		if (desc && desc->of_map_mode) {
 			ret = desc->of_map_mode(pval);
@@ -95,6 +107,12 @@ static void of_get_regulation_constraints(struct device_node *np,
 		}
 	}
 
+	if (!of_property_read_u32(np, "regulator-system-load", &pval))
+		constraints->system_load = pval;
+
+	constraints->over_current_protection = of_property_read_bool(np,
+					"regulator-over-current-protection");
+
 	for (i = 0; i < ARRAY_SIZE(regulator_states); i++) {
 		switch (i) {
 		case PM_SUSPEND_MEM:
@@ -108,7 +126,7 @@ static void of_get_regulation_constraints(struct device_node *np,
 		case PM_SUSPEND_STANDBY:
 		default:
 			continue;
-		};
+		}
 
 		suspend_np = of_get_child_by_name(np, regulator_states[i]);
 		if (!suspend_np || !suspend_state)
@@ -292,7 +310,7 @@ struct regulator_init_data *regulator_of_get_init_data(struct device *dev,
 		return NULL;
 	}
 
-	for_each_child_of_node(search, child) {
+	for_each_available_child_of_node(search, child) {
 		name = of_get_property(child, "regulator-compatible", NULL);
 		if (!name)
 			name = child->name;
diff --git a/kernel/drivers/regulator/pbias-regulator.c b/kernel/drivers/regulator/pbias-regulator.c
index 4fa7bcaf4..f9d74d63b 100644
--- a/kernel/drivers/regulator/pbias-regulator.c
+++ b/kernel/drivers/regulator/pbias-regulator.c
@@ -45,6 +45,10 @@ struct pbias_regulator_data {
 	int voltage;
 };
 
+struct pbias_of_data {
+	unsigned int offset;
+};
+
 static const unsigned int pbias_volt_table[] = {
 	1800000,
 	3000000
@@ -102,8 +106,35 @@ static struct of_regulator_match pbias_matches[] = {
 };
 #define PBIAS_NUM_REGS	ARRAY_SIZE(pbias_matches)
 
+/* Offset from SCM general area (and syscon) base */
+
+static const struct pbias_of_data pbias_of_data_omap2 = {
+	.offset = 0x230,
+};
+
+static const struct pbias_of_data pbias_of_data_omap3 = {
+	.offset = 0x2b0,
+};
+
+static const struct pbias_of_data pbias_of_data_omap4 = {
+	.offset = 0x60,
+};
+
+static const struct pbias_of_data pbias_of_data_omap5 = {
+	.offset = 0x60,
+};
+
+static const struct pbias_of_data pbias_of_data_dra7 = {
+	.offset = 0xe00,
+};
+
 static const struct of_device_id pbias_of_match[] = {
 	{ .compatible = "ti,pbias-omap", },
+	{ .compatible = "ti,pbias-omap2", .data = &pbias_of_data_omap2, },
+	{ .compatible = "ti,pbias-omap3", .data = &pbias_of_data_omap3, },
+	{ .compatible = "ti,pbias-omap4", .data = &pbias_of_data_omap4, },
+	{ .compatible = "ti,pbias-omap5", .data = &pbias_of_data_omap5, },
+	{ .compatible = "ti,pbias-dra7", .data = &pbias_of_data_dra7, },
 	{},
 };
 MODULE_DEVICE_TABLE(of, pbias_of_match);
@@ -118,6 +149,9 @@ static int pbias_regulator_probe(struct platform_device *pdev)
 	const struct pbias_reg_info *info;
 	int ret = 0;
 	int count, idx, data_idx = 0;
+	const struct of_device_id *match;
+	const struct pbias_of_data *data;
+	unsigned int offset;
 
 	count = of_regulator_match(&pdev->dev, np, pbias_matches,
 						PBIAS_NUM_REGS);
@@ -133,6 +167,20 @@ static int pbias_regulator_probe(struct platform_device *pdev)
 	if (IS_ERR(syscon))
 		return PTR_ERR(syscon);
 
+	match = of_match_device(of_match_ptr(pbias_of_match), &pdev->dev);
+	if (match && match->data) {
+		data = match->data;
+		offset = data->offset;
+	} else {
+		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+		if (!res)
+			return -EINVAL;
+
+		offset = res->start;
+		dev_WARN(&pdev->dev,
+			 "using legacy dt data for pbias offset\n");
+	}
+
 	cfg.regmap = syscon;
 	cfg.dev = &pdev->dev;
 
@@ -145,10 +193,6 @@ static int pbias_regulator_probe(struct platform_device *pdev)
 		if (!info)
 			return -ENODEV;
 
-		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-		if (!res)
-			return -EINVAL;
-
 		drvdata[data_idx].syscon = syscon;
 		drvdata[data_idx].info = info;
 		drvdata[data_idx].desc.name = info->name;
@@ -158,9 +202,9 @@ static int pbias_regulator_probe(struct platform_device *pdev)
 		drvdata[data_idx].desc.volt_table = pbias_volt_table;
 		drvdata[data_idx].desc.n_voltages = 2;
 		drvdata[data_idx].desc.enable_time = info->enable_time;
-		drvdata[data_idx].desc.vsel_reg = res->start;
+		drvdata[data_idx].desc.vsel_reg = offset;
 		drvdata[data_idx].desc.vsel_mask = info->vmode;
-		drvdata[data_idx].desc.enable_reg = res->start;
+		drvdata[data_idx].desc.enable_reg = offset;
 		drvdata[data_idx].desc.enable_mask = info->enable_mask;
 		drvdata[data_idx].desc.enable_val = info->enable;
 		drvdata[data_idx].desc.disable_val = info->disable_val;
diff --git a/kernel/drivers/regulator/pfuze100-regulator.c b/kernel/drivers/regulator/pfuze100-regulator.c
index 8cc8d1877..2a44e5dd9 100644
--- a/kernel/drivers/regulator/pfuze100-regulator.c
+++ b/kernel/drivers/regulator/pfuze100-regulator.c
@@ -643,7 +643,6 @@ static struct i2c_driver pfuze_driver = {
 	.id_table = pfuze_device_id,
 	.driver = {
 		.name = "pfuze100-regulator",
-		.owner = THIS_MODULE,
 		.of_match_table = pfuze_dt_ids,
 	},
 	.probe = pfuze100_regulator_probe,
@@ -653,4 +652,3 @@ module_i2c_driver(pfuze_driver);
 MODULE_AUTHOR("Robin Gong <b38343@freescale.com>");
 MODULE_DESCRIPTION("Regulator Driver for Freescale PFUZE100/PFUZE200 PMIC");
 MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("i2c:pfuze100-regulator");
diff --git a/kernel/drivers/regulator/pwm-regulator.c b/kernel/drivers/regulator/pwm-regulator.c
index 253833ae3..3aca067b9 100644
--- a/kernel/drivers/regulator/pwm-regulator.c
+++ b/kernel/drivers/regulator/pwm-regulator.c
@@ -10,6 +10,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/delay.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/err.h>
@@ -21,11 +22,15 @@
 #include <linux/pwm.h>
 
 struct pwm_regulator_data {
-	struct regulator_desc desc;
-	struct pwm_voltages *duty_cycle_table;
+	/*  Shared */
 	struct pwm_device *pwm;
-	bool enabled;
+
+	/* Voltage table */
+	struct pwm_voltages *duty_cycle_table;
 	int state;
+
+	/* Continuous voltage */
+	int volt_uV;
 };
 
 struct pwm_voltages {
@@ -33,17 +38,20 @@ struct pwm_voltages {
 	unsigned int dutycycle;
 };
 
-static int pwm_regulator_get_voltage_sel(struct regulator_dev *dev)
+/**
+ * Voltage table call-backs
+ */
+static int pwm_regulator_get_voltage_sel(struct regulator_dev *rdev)
 {
-	struct pwm_regulator_data *drvdata = rdev_get_drvdata(dev);
+	struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev);
 
 	return drvdata->state;
 }
 
-static int pwm_regulator_set_voltage_sel(struct regulator_dev *dev,
+static int pwm_regulator_set_voltage_sel(struct regulator_dev *rdev,
 					 unsigned selector)
 {
-	struct pwm_regulator_data *drvdata = rdev_get_drvdata(dev);
+	struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev);
 	unsigned int pwm_reg_period;
 	int dutycycle;
 	int ret;
@@ -55,58 +63,178 @@ static int pwm_regulator_set_voltage_sel(struct regulator_dev *dev,
 
 	ret = pwm_config(drvdata->pwm, dutycycle, pwm_reg_period);
 	if (ret) {
-		dev_err(&dev->dev, "Failed to configure PWM\n");
+		dev_err(&rdev->dev, "Failed to configure PWM\n");
 		return ret;
 	}
 
 	drvdata->state = selector;
 
-	if (!drvdata->enabled) {
-		ret = pwm_enable(drvdata->pwm);
-		if (ret) {
-			dev_err(&dev->dev, "Failed to enable PWM\n");
-			return ret;
-		}
-		drvdata->enabled = true;
-	}
-
 	return 0;
 }
 
-static int pwm_regulator_list_voltage(struct regulator_dev *dev,
+static int pwm_regulator_list_voltage(struct regulator_dev *rdev,
 				      unsigned selector)
 {
-	struct pwm_regulator_data *drvdata = rdev_get_drvdata(dev);
+	struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev);
 
-	if (selector >= drvdata->desc.n_voltages)
+	if (selector >= rdev->desc->n_voltages)
 		return -EINVAL;
 
 	return drvdata->duty_cycle_table[selector].uV;
 }
 
-static struct regulator_ops pwm_regulator_voltage_ops = {
+static int pwm_regulator_enable(struct regulator_dev *dev)
+{
+	struct pwm_regulator_data *drvdata = rdev_get_drvdata(dev);
+
+	return pwm_enable(drvdata->pwm);
+}
+
+static int pwm_regulator_disable(struct regulator_dev *dev)
+{
+	struct pwm_regulator_data *drvdata = rdev_get_drvdata(dev);
+
+	pwm_disable(drvdata->pwm);
+
+	return 0;
+}
+
+static int pwm_regulator_is_enabled(struct regulator_dev *dev)
+{
+	struct pwm_regulator_data *drvdata = rdev_get_drvdata(dev);
+
+	return pwm_is_enabled(drvdata->pwm);
+}
+
+/**
+ * Continuous voltage call-backs
+ */
+static int pwm_voltage_to_duty_cycle_percentage(struct regulator_dev *rdev, int req_uV)
+{
+	int min_uV = rdev->constraints->min_uV;
+	int max_uV = rdev->constraints->max_uV;
+	int diff = max_uV - min_uV;
+
+	return 100 - (((req_uV * 100) - (min_uV * 100)) / diff);
+}
+
+static int pwm_regulator_get_voltage(struct regulator_dev *rdev)
+{
+	struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev);
+
+	return drvdata->volt_uV;
+}
+
+static int pwm_regulator_set_voltage(struct regulator_dev *rdev,
+					int min_uV, int max_uV,
+					unsigned *selector)
+{
+	struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev);
+	unsigned int ramp_delay = rdev->constraints->ramp_delay;
+	unsigned int period = pwm_get_period(drvdata->pwm);
+	int duty_cycle;
+	int ret;
+
+	duty_cycle = pwm_voltage_to_duty_cycle_percentage(rdev, min_uV);
+
+	ret = pwm_config(drvdata->pwm, (period / 100) * duty_cycle, period);
+	if (ret) {
+		dev_err(&rdev->dev, "Failed to configure PWM\n");
+		return ret;
+	}
+
+	ret = pwm_enable(drvdata->pwm);
+	if (ret) {
+		dev_err(&rdev->dev, "Failed to enable PWM\n");
+		return ret;
+	}
+	drvdata->volt_uV = min_uV;
+
+	/* Delay required by PWM regulator to settle to the new voltage */
+	usleep_range(ramp_delay, ramp_delay + 1000);
+
+	return 0;
+}
+
+static struct regulator_ops pwm_regulator_voltage_table_ops = {
 	.set_voltage_sel = pwm_regulator_set_voltage_sel,
 	.get_voltage_sel = pwm_regulator_get_voltage_sel,
 	.list_voltage    = pwm_regulator_list_voltage,
 	.map_voltage     = regulator_map_voltage_iterate,
+	.enable          = pwm_regulator_enable,
+	.disable         = pwm_regulator_disable,
+	.is_enabled      = pwm_regulator_is_enabled,
+};
+
+static struct regulator_ops pwm_regulator_voltage_continuous_ops = {
+	.get_voltage = pwm_regulator_get_voltage,
+	.set_voltage = pwm_regulator_set_voltage,
+	.enable          = pwm_regulator_enable,
+	.disable         = pwm_regulator_disable,
+	.is_enabled      = pwm_regulator_is_enabled,
 };
 
-static const struct regulator_desc pwm_regulator_desc = {
+static struct regulator_desc pwm_regulator_desc = {
 	.name		= "pwm-regulator",
-	.ops		= &pwm_regulator_voltage_ops,
 	.type		= REGULATOR_VOLTAGE,
 	.owner		= THIS_MODULE,
 	.supply_name    = "pwm",
 };
 
+static int pwm_regulator_init_table(struct platform_device *pdev,
+				    struct pwm_regulator_data *drvdata)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct pwm_voltages *duty_cycle_table;
+	unsigned int length = 0;
+	int ret;
+
+	of_find_property(np, "voltage-table", &length);
+
+	if ((length < sizeof(*duty_cycle_table)) ||
+	    (length % sizeof(*duty_cycle_table))) {
+		dev_err(&pdev->dev,
+			"voltage-table length(%d) is invalid\n",
+			length);
+		return -EINVAL;
+	}
+
+	duty_cycle_table = devm_kzalloc(&pdev->dev, length, GFP_KERNEL);
+	if (!duty_cycle_table)
+		return -ENOMEM;
+
+	ret = of_property_read_u32_array(np, "voltage-table",
+					 (u32 *)duty_cycle_table,
+					 length / sizeof(u32));
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to read voltage-table\n");
+		return ret;
+	}
+
+	drvdata->duty_cycle_table	= duty_cycle_table;
+	pwm_regulator_desc.ops		= &pwm_regulator_voltage_table_ops;
+	pwm_regulator_desc.n_voltages	= length / sizeof(*duty_cycle_table);
+
+	return 0;
+}
+
+static int pwm_regulator_init_continuous(struct platform_device *pdev,
+					 struct pwm_regulator_data *drvdata)
+{
+	pwm_regulator_desc.ops = &pwm_regulator_voltage_continuous_ops;
+	pwm_regulator_desc.continuous_voltage_range = true;
+
+	return 0;
+}
+
 static int pwm_regulator_probe(struct platform_device *pdev)
 {
+	const struct regulator_init_data *init_data;
 	struct pwm_regulator_data *drvdata;
-	struct property *prop;
 	struct regulator_dev *regulator;
 	struct regulator_config config = { };
 	struct device_node *np = pdev->dev.of_node;
-	int length, ret;
+	int ret;
 
 	if (!np) {
 		dev_err(&pdev->dev, "Device Tree node missing\n");
@@ -117,46 +245,22 @@ static int pwm_regulator_probe(struct platform_device *pdev)
 	if (!drvdata)
 		return -ENOMEM;
 
-	memcpy(&drvdata->desc, &pwm_regulator_desc, sizeof(pwm_regulator_desc));
-
-	/* determine the number of voltage-table */
-	prop = of_find_property(np, "voltage-table", &length);
-	if (!prop) {
-		dev_err(&pdev->dev, "No voltage-table\n");
-		return -EINVAL;
-	}
-
-	if ((length < sizeof(*drvdata->duty_cycle_table)) ||
-	    (length % sizeof(*drvdata->duty_cycle_table))) {
-		dev_err(&pdev->dev, "voltage-table length(%d) is invalid\n",
-			length);
-		return -EINVAL;
-	}
-
-	drvdata->desc.n_voltages = length / sizeof(*drvdata->duty_cycle_table);
-
-	drvdata->duty_cycle_table = devm_kzalloc(&pdev->dev,
-						 length, GFP_KERNEL);
-	if (!drvdata->duty_cycle_table)
-		return -ENOMEM;
-
-	/* read voltage table from DT property */
-	ret = of_property_read_u32_array(np, "voltage-table",
-					 (u32 *)drvdata->duty_cycle_table,
-					 length / sizeof(u32));
-	if (ret < 0) {
-		dev_err(&pdev->dev, "read voltage-table failed\n");
+	if (of_find_property(np, "voltage-table", NULL))
+		ret = pwm_regulator_init_table(pdev, drvdata);
+	else
+		ret = pwm_regulator_init_continuous(pdev, drvdata);
+	if (ret)
 		return ret;
-	}
 
-	config.init_data = of_get_regulator_init_data(&pdev->dev, np,
-						      &drvdata->desc);
-	if (!config.init_data)
+	init_data = of_get_regulator_init_data(&pdev->dev, np,
+					       &pwm_regulator_desc);
+	if (!init_data)
 		return -ENOMEM;
 
 	config.of_node = np;
 	config.dev = &pdev->dev;
 	config.driver_data = drvdata;
+	config.init_data = init_data;
 
 	drvdata->pwm = devm_pwm_get(&pdev->dev, NULL);
 	if (IS_ERR(drvdata->pwm)) {
@@ -165,10 +269,10 @@ static int pwm_regulator_probe(struct platform_device *pdev)
 	}
 
 	regulator = devm_regulator_register(&pdev->dev,
-					    &drvdata->desc, &config);
+					    &pwm_regulator_desc, &config);
 	if (IS_ERR(regulator)) {
 		dev_err(&pdev->dev, "Failed to register regulator %s\n",
-			drvdata->desc.name);
+			pwm_regulator_desc.name);
 		return PTR_ERR(regulator);
 	}
 
diff --git a/kernel/drivers/regulator/qcom_smd-regulator.c b/kernel/drivers/regulator/qcom_smd-regulator.c
new file mode 100644
index 000000000..6fa0c7d13
--- /dev/null
+++ b/kernel/drivers/regulator/qcom_smd-regulator.c
@@ -0,0 +1,350 @@
+/*
+ * Copyright (c) 2015, Sony Mobile Communications AB.
+ * Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/soc/qcom/smd-rpm.h>
+
+struct qcom_rpm_reg {
+	struct device *dev;
+
+	struct qcom_smd_rpm *rpm;
+
+	u32 type;
+	u32 id;
+
+	struct regulator_desc desc;
+
+	int is_enabled;
+	int uV;
+};
+
+struct rpm_regulator_req {
+	__le32 key;
+	__le32 nbytes;
+	__le32 value;
+};
+
+#define RPM_KEY_SWEN	0x6e657773 /* "swen" */
+#define RPM_KEY_UV	0x00007675 /* "uv" */
+#define RPM_KEY_MA	0x0000616d /* "ma" */
+
+static int rpm_reg_write_active(struct qcom_rpm_reg *vreg,
+				struct rpm_regulator_req *req,
+				size_t size)
+{
+	return qcom_rpm_smd_write(vreg->rpm,
+				  QCOM_SMD_RPM_ACTIVE_STATE,
+				  vreg->type,
+				  vreg->id,
+				  req, size);
+}
+
+static int rpm_reg_enable(struct regulator_dev *rdev)
+{
+	struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+	struct rpm_regulator_req req;
+	int ret;
+
+	req.key = cpu_to_le32(RPM_KEY_SWEN);
+	req.nbytes = cpu_to_le32(sizeof(u32));
+	req.value = cpu_to_le32(1);
+
+	ret = rpm_reg_write_active(vreg, &req, sizeof(req));
+	if (!ret)
+		vreg->is_enabled = 1;
+
+	return ret;
+}
+
+static int rpm_reg_is_enabled(struct regulator_dev *rdev)
+{
+	struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+
+	return vreg->is_enabled;
+}
+
+static int rpm_reg_disable(struct regulator_dev *rdev)
+{
+	struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+	struct rpm_regulator_req req;
+	int ret;
+
+	req.key = cpu_to_le32(RPM_KEY_SWEN);
+	req.nbytes = cpu_to_le32(sizeof(u32));
+	req.value = 0;
+
+	ret = rpm_reg_write_active(vreg, &req, sizeof(req));
+	if (!ret)
+		vreg->is_enabled = 0;
+
+	return ret;
+}
+
+static int rpm_reg_get_voltage(struct regulator_dev *rdev)
+{
+	struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+
+	return vreg->uV;
+}
+
+static int rpm_reg_set_voltage(struct regulator_dev *rdev,
+			       int min_uV,
+			       int max_uV,
+			       unsigned *selector)
+{
+	struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+	struct rpm_regulator_req req;
+	int ret = 0;
+
+	req.key = cpu_to_le32(RPM_KEY_UV);
+	req.nbytes = cpu_to_le32(sizeof(u32));
+	req.value = cpu_to_le32(min_uV);
+
+	ret = rpm_reg_write_active(vreg, &req, sizeof(req));
+	if (!ret)
+		vreg->uV = min_uV;
+
+	return ret;
+}
+
+static int rpm_reg_set_load(struct regulator_dev *rdev, int load_uA)
+{
+	struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+	struct rpm_regulator_req req;
+
+	req.key = cpu_to_le32(RPM_KEY_MA);
+	req.nbytes = cpu_to_le32(sizeof(u32));
+	req.value = cpu_to_le32(load_uA / 1000);
+
+	return rpm_reg_write_active(vreg, &req, sizeof(req));
+}
+
+static const struct regulator_ops rpm_smps_ldo_ops = {
+	.enable = rpm_reg_enable,
+	.disable = rpm_reg_disable,
+	.is_enabled = rpm_reg_is_enabled,
+
+	.get_voltage = rpm_reg_get_voltage,
+	.set_voltage = rpm_reg_set_voltage,
+
+	.set_load = rpm_reg_set_load,
+};
+
+static const struct regulator_ops rpm_switch_ops = {
+	.enable = rpm_reg_enable,
+	.disable = rpm_reg_disable,
+	.is_enabled = rpm_reg_is_enabled,
+};
+
+static const struct regulator_desc pm8x41_hfsmps = {
+	.linear_ranges = (struct regulator_linear_range[]) {
+		REGULATOR_LINEAR_RANGE( 375000,  0,  95, 12500),
+		REGULATOR_LINEAR_RANGE(1550000, 96, 158, 25000),
+	},
+	.n_linear_ranges = 2,
+	.n_voltages = 159,
+	.ops = &rpm_smps_ldo_ops,
+};
+
+static const struct regulator_desc pm8841_ftsmps = {
+	.linear_ranges = (struct regulator_linear_range[]) {
+		REGULATOR_LINEAR_RANGE(350000,  0, 184, 5000),
+		REGULATOR_LINEAR_RANGE(700000, 185, 339, 10000),
+	},
+	.n_linear_ranges = 2,
+	.n_voltages = 340,
+	.ops = &rpm_smps_ldo_ops,
+};
+
+static const struct regulator_desc pm8941_boost = {
+	.linear_ranges = (struct regulator_linear_range[]) {
+		REGULATOR_LINEAR_RANGE(4000000, 0, 15, 100000),
+	},
+	.n_linear_ranges = 1,
+	.n_voltages = 16,
+	.ops = &rpm_smps_ldo_ops,
+};
+
+static const struct regulator_desc pm8941_pldo = {
+	.linear_ranges = (struct regulator_linear_range[]) {
+		REGULATOR_LINEAR_RANGE( 750000,  0,  30, 25000),
+		REGULATOR_LINEAR_RANGE(1500000, 31, 99, 50000),
+	},
+	.n_linear_ranges = 2,
+	.n_voltages = 100,
+	.ops = &rpm_smps_ldo_ops,
+};
+
+static const struct regulator_desc pm8941_nldo = {
+	.linear_ranges = (struct regulator_linear_range[]) {
+		REGULATOR_LINEAR_RANGE(750000, 0, 63, 12500),
+	},
+	.n_linear_ranges = 1,
+	.n_voltages = 64,
+	.ops = &rpm_smps_ldo_ops,
+};
+
+static const struct regulator_desc pm8941_lnldo = {
+	.fixed_uV = 1740000,
+	.n_voltages = 1,
+	.ops = &rpm_smps_ldo_ops,
+};
+
+static const struct regulator_desc pm8941_switch = {
+	.ops = &rpm_switch_ops,
+};
+
+struct rpm_regulator_data {
+	const char *name;
+	u32 type;
+	u32 id;
+	const struct regulator_desc *desc;
+	const char *supply;
+};
+
+static const struct rpm_regulator_data rpm_pm8841_regulators[] = {
+	{ "s1", QCOM_SMD_RPM_SMPB, 1, &pm8x41_hfsmps, "vdd_s1" },
+	{ "s2", QCOM_SMD_RPM_SMPB, 2, &pm8841_ftsmps, "vdd_s2" },
+	{ "s3", QCOM_SMD_RPM_SMPB, 3, &pm8x41_hfsmps, "vdd_s3" },
+	{ "s4", QCOM_SMD_RPM_SMPB, 4, &pm8841_ftsmps, "vdd_s4" },
+	{ "s5", QCOM_SMD_RPM_SMPB, 5, &pm8841_ftsmps, "vdd_s5" },
+	{ "s6", QCOM_SMD_RPM_SMPB, 6, &pm8841_ftsmps, "vdd_s6" },
+	{ "s7", QCOM_SMD_RPM_SMPB, 7, &pm8841_ftsmps, "vdd_s7" },
+	{ "s8", QCOM_SMD_RPM_SMPB, 8, &pm8841_ftsmps, "vdd_s8" },
+	{}
+};
+
+static const struct rpm_regulator_data rpm_pm8941_regulators[] = {
+	{ "s1", QCOM_SMD_RPM_SMPA, 1, &pm8x41_hfsmps, "vdd_s1" },
+	{ "s2", QCOM_SMD_RPM_SMPA, 2, &pm8x41_hfsmps, "vdd_s2" },
+	{ "s3", QCOM_SMD_RPM_SMPA, 3, &pm8x41_hfsmps, "vdd_s3" },
+	{ "s4", QCOM_SMD_RPM_BOOST, 1, &pm8941_boost },
+
+	{ "l1", QCOM_SMD_RPM_LDOA, 1, &pm8941_nldo, "vdd_l1_l3" },
+	{ "l2", QCOM_SMD_RPM_LDOA, 2, &pm8941_nldo, "vdd_l2_lvs1_2_3" },
+	{ "l3", QCOM_SMD_RPM_LDOA, 3, &pm8941_nldo, "vdd_l1_l3" },
+	{ "l4", QCOM_SMD_RPM_LDOA, 4, &pm8941_nldo, "vdd_l4_l11" },
+	{ "l5", QCOM_SMD_RPM_LDOA, 5, &pm8941_lnldo, "vdd_l5_l7" },
+	{ "l6", QCOM_SMD_RPM_LDOA, 6, &pm8941_pldo, "vdd_l6_l12_l14_l15" },
+	{ "l7", QCOM_SMD_RPM_LDOA, 7, &pm8941_lnldo, "vdd_l5_l7" },
+	{ "l8", QCOM_SMD_RPM_LDOA, 8, &pm8941_pldo, "vdd_l8_l16_l18_l19" },
+	{ "l9", QCOM_SMD_RPM_LDOA, 9, &pm8941_pldo, "vdd_l9_l10_l17_l22" },
+	{ "l10", QCOM_SMD_RPM_LDOA, 10, &pm8941_pldo, "vdd_l9_l10_l17_l22" },
+	{ "l11", QCOM_SMD_RPM_LDOA, 11, &pm8941_nldo, "vdd_l4_l11" },
+	{ "l12", QCOM_SMD_RPM_LDOA, 12, &pm8941_pldo, "vdd_l6_l12_l14_l15" },
+	{ "l13", QCOM_SMD_RPM_LDOA, 13, &pm8941_pldo, "vdd_l13_l20_l23_l24" },
+	{ "l14", QCOM_SMD_RPM_LDOA, 14, &pm8941_pldo, "vdd_l6_l12_l14_l15" },
+	{ "l15", QCOM_SMD_RPM_LDOA, 15, &pm8941_pldo, "vdd_l6_l12_l14_l15" },
+	{ "l16", QCOM_SMD_RPM_LDOA, 16, &pm8941_pldo, "vdd_l8_l16_l18_l19" },
+	{ "l17", QCOM_SMD_RPM_LDOA, 17, &pm8941_pldo, "vdd_l9_l10_l17_l22" },
+	{ "l18", QCOM_SMD_RPM_LDOA, 18, &pm8941_pldo, "vdd_l8_l16_l18_l19" },
+	{ "l19", QCOM_SMD_RPM_LDOA, 19, &pm8941_pldo, "vdd_l8_l16_l18_l19" },
+	{ "l20", QCOM_SMD_RPM_LDOA, 20, &pm8941_pldo, "vdd_l13_l20_l23_l24" },
+	{ "l21", QCOM_SMD_RPM_LDOA, 21, &pm8941_pldo, "vdd_l21" },
+	{ "l22", QCOM_SMD_RPM_LDOA, 22, &pm8941_pldo, "vdd_l9_l10_l17_l22" },
+	{ "l23", QCOM_SMD_RPM_LDOA, 23, &pm8941_pldo, "vdd_l13_l20_l23_l24" },
+	{ "l24", QCOM_SMD_RPM_LDOA, 24, &pm8941_pldo, "vdd_l13_l20_l23_l24" },
+
+	{ "lvs1", QCOM_SMD_RPM_VSA, 1, &pm8941_switch, "vdd_l2_lvs1_2_3" },
+	{ "lvs2", QCOM_SMD_RPM_VSA, 2, &pm8941_switch, "vdd_l2_lvs1_2_3" },
+	{ "lvs3", QCOM_SMD_RPM_VSA, 3, &pm8941_switch, "vdd_l2_lvs1_2_3" },
+
+	{ "5vs1", QCOM_SMD_RPM_VSA, 4, &pm8941_switch, "vin_5vs" },
+	{ "5vs2", QCOM_SMD_RPM_VSA, 5, &pm8941_switch, "vin_5vs" },
+
+	{}
+};
+
+static const struct of_device_id rpm_of_match[] = {
+	{ .compatible = "qcom,rpm-pm8841-regulators", .data = &rpm_pm8841_regulators },
+	{ .compatible = "qcom,rpm-pm8941-regulators", .data = &rpm_pm8941_regulators },
+	{}
+};
+MODULE_DEVICE_TABLE(of, rpm_of_match);
+
+static int rpm_reg_probe(struct platform_device *pdev)
+{
+	const struct rpm_regulator_data *reg;
+	const struct of_device_id *match;
+	struct regulator_config config = { };
+	struct regulator_dev *rdev;
+	struct qcom_rpm_reg *vreg;
+	struct qcom_smd_rpm *rpm;
+
+	rpm = dev_get_drvdata(pdev->dev.parent);
+	if (!rpm) {
+		dev_err(&pdev->dev, "unable to retrieve handle to rpm\n");
+		return -ENODEV;
+	}
+
+	match = of_match_device(rpm_of_match, &pdev->dev);
+	for (reg = match->data; reg->name; reg++) {
+		vreg = devm_kzalloc(&pdev->dev, sizeof(*vreg), GFP_KERNEL);
+		if (!vreg)
+			return -ENOMEM;
+
+		vreg->dev = &pdev->dev;
+		vreg->type = reg->type;
+		vreg->id = reg->id;
+		vreg->rpm = rpm;
+
+		memcpy(&vreg->desc, reg->desc, sizeof(vreg->desc));
+
+		vreg->desc.id = -1;
+		vreg->desc.owner = THIS_MODULE;
+		vreg->desc.type = REGULATOR_VOLTAGE;
+		vreg->desc.name = reg->name;
+		vreg->desc.supply_name = reg->supply;
+		vreg->desc.of_match = reg->name;
+
+		config.dev = &pdev->dev;
+		config.driver_data = vreg;
+		rdev = devm_regulator_register(&pdev->dev, &vreg->desc, &config);
+		if (IS_ERR(rdev)) {
+			dev_err(&pdev->dev, "failed to register %s\n", reg->name);
+			return PTR_ERR(rdev);
+		}
+	}
+
+	return 0;
+}
+
+static struct platform_driver rpm_reg_driver = {
+	.probe = rpm_reg_probe,
+	.driver = {
+		.name  = "qcom_rpm_smd_regulator",
+		.of_match_table = rpm_of_match,
+	},
+};
+
+static int __init rpm_reg_init(void)
+{
+	return platform_driver_register(&rpm_reg_driver);
+}
+subsys_initcall(rpm_reg_init);
+
+static void __exit rpm_reg_exit(void)
+{
+	platform_driver_unregister(&rpm_reg_driver);
+}
+module_exit(rpm_reg_exit)
+
+MODULE_DESCRIPTION("Qualcomm RPM regulator driver");
+MODULE_LICENSE("GPL v2");
diff --git a/kernel/drivers/regulator/qcom_spmi-regulator.c b/kernel/drivers/regulator/qcom_spmi-regulator.c
new file mode 100644
index 000000000..88a5dc88b
--- /dev/null
+++ b/kernel/drivers/regulator/qcom_spmi-regulator.c
@@ -0,0 +1,1624 @@
+/*
+ * Copyright (c) 2012-2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/bitops.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/ktime.h>
+#include <linux/regulator/driver.h>
+#include <linux/regmap.h>
+#include <linux/list.h>
+
+/* Pin control enable input pins. */
+#define SPMI_REGULATOR_PIN_CTRL_ENABLE_NONE		0x00
+#define SPMI_REGULATOR_PIN_CTRL_ENABLE_EN0		0x01
+#define SPMI_REGULATOR_PIN_CTRL_ENABLE_EN1		0x02
+#define SPMI_REGULATOR_PIN_CTRL_ENABLE_EN2		0x04
+#define SPMI_REGULATOR_PIN_CTRL_ENABLE_EN3		0x08
+#define SPMI_REGULATOR_PIN_CTRL_ENABLE_HW_DEFAULT	0x10
+
+/* Pin control high power mode input pins. */
+#define SPMI_REGULATOR_PIN_CTRL_HPM_NONE		0x00
+#define SPMI_REGULATOR_PIN_CTRL_HPM_EN0			0x01
+#define SPMI_REGULATOR_PIN_CTRL_HPM_EN1			0x02
+#define SPMI_REGULATOR_PIN_CTRL_HPM_EN2			0x04
+#define SPMI_REGULATOR_PIN_CTRL_HPM_EN3			0x08
+#define SPMI_REGULATOR_PIN_CTRL_HPM_SLEEP_B		0x10
+#define SPMI_REGULATOR_PIN_CTRL_HPM_HW_DEFAULT		0x20
+
+/*
+ * Used with enable parameters to specify that hardware default register values
+ * should be left unaltered.
+ */
+#define SPMI_REGULATOR_USE_HW_DEFAULT			2
+
+/* Soft start strength of a voltage switch type regulator */
+enum spmi_vs_soft_start_str {
+	SPMI_VS_SOFT_START_STR_0P05_UA = 0,
+	SPMI_VS_SOFT_START_STR_0P25_UA,
+	SPMI_VS_SOFT_START_STR_0P55_UA,
+	SPMI_VS_SOFT_START_STR_0P75_UA,
+	SPMI_VS_SOFT_START_STR_HW_DEFAULT,
+};
+
+/**
+ * struct spmi_regulator_init_data - spmi-regulator initialization data
+ * @pin_ctrl_enable:        Bit mask specifying which hardware pins should be
+ *				used to enable the regulator, if any
+ *			    Value should be an ORing of
+ *				SPMI_REGULATOR_PIN_CTRL_ENABLE_* constants.  If
+ *				the bit specified by
+ *				SPMI_REGULATOR_PIN_CTRL_ENABLE_HW_DEFAULT is
+ *				set, then pin control enable hardware registers
+ *				will not be modified.
+ * @pin_ctrl_hpm:           Bit mask specifying which hardware pins should be
+ *				used to force the regulator into high power
+ *				mode, if any
+ *			    Value should be an ORing of
+ *				SPMI_REGULATOR_PIN_CTRL_HPM_* constants.  If
+ *				the bit specified by
+ *				SPMI_REGULATOR_PIN_CTRL_HPM_HW_DEFAULT is
+ *				set, then pin control mode hardware registers
+ *				will not be modified.
+ * @vs_soft_start_strength: This parameter sets the soft start strength for
+ *				voltage switch type regulators.  Its value
+ *				should be one of SPMI_VS_SOFT_START_STR_*.  If
+ *				its value is SPMI_VS_SOFT_START_STR_HW_DEFAULT,
+ *				then the soft start strength will be left at its
+ *				default hardware value.
+ */
+struct spmi_regulator_init_data {
+	unsigned				pin_ctrl_enable;
+	unsigned				pin_ctrl_hpm;
+	enum spmi_vs_soft_start_str		vs_soft_start_strength;
+};
+
+/* These types correspond to unique register layouts. */
+enum spmi_regulator_logical_type {
+	SPMI_REGULATOR_LOGICAL_TYPE_SMPS,
+	SPMI_REGULATOR_LOGICAL_TYPE_LDO,
+	SPMI_REGULATOR_LOGICAL_TYPE_VS,
+	SPMI_REGULATOR_LOGICAL_TYPE_BOOST,
+	SPMI_REGULATOR_LOGICAL_TYPE_FTSMPS,
+	SPMI_REGULATOR_LOGICAL_TYPE_BOOST_BYP,
+	SPMI_REGULATOR_LOGICAL_TYPE_LN_LDO,
+	SPMI_REGULATOR_LOGICAL_TYPE_ULT_LO_SMPS,
+	SPMI_REGULATOR_LOGICAL_TYPE_ULT_HO_SMPS,
+	SPMI_REGULATOR_LOGICAL_TYPE_ULT_LDO,
+};
+
+enum spmi_regulator_type {
+	SPMI_REGULATOR_TYPE_BUCK		= 0x03,
+	SPMI_REGULATOR_TYPE_LDO			= 0x04,
+	SPMI_REGULATOR_TYPE_VS			= 0x05,
+	SPMI_REGULATOR_TYPE_BOOST		= 0x1b,
+	SPMI_REGULATOR_TYPE_FTS			= 0x1c,
+	SPMI_REGULATOR_TYPE_BOOST_BYP		= 0x1f,
+	SPMI_REGULATOR_TYPE_ULT_LDO		= 0x21,
+	SPMI_REGULATOR_TYPE_ULT_BUCK		= 0x22,
+};
+
+enum spmi_regulator_subtype {
+	SPMI_REGULATOR_SUBTYPE_GP_CTL		= 0x08,
+	SPMI_REGULATOR_SUBTYPE_RF_CTL		= 0x09,
+	SPMI_REGULATOR_SUBTYPE_N50		= 0x01,
+	SPMI_REGULATOR_SUBTYPE_N150		= 0x02,
+	SPMI_REGULATOR_SUBTYPE_N300		= 0x03,
+	SPMI_REGULATOR_SUBTYPE_N600		= 0x04,
+	SPMI_REGULATOR_SUBTYPE_N1200		= 0x05,
+	SPMI_REGULATOR_SUBTYPE_N600_ST		= 0x06,
+	SPMI_REGULATOR_SUBTYPE_N1200_ST		= 0x07,
+	SPMI_REGULATOR_SUBTYPE_N900_ST		= 0x14,
+	SPMI_REGULATOR_SUBTYPE_N300_ST		= 0x15,
+	SPMI_REGULATOR_SUBTYPE_P50		= 0x08,
+	SPMI_REGULATOR_SUBTYPE_P150		= 0x09,
+	SPMI_REGULATOR_SUBTYPE_P300		= 0x0a,
+	SPMI_REGULATOR_SUBTYPE_P600		= 0x0b,
+	SPMI_REGULATOR_SUBTYPE_P1200		= 0x0c,
+	SPMI_REGULATOR_SUBTYPE_LN		= 0x10,
+	SPMI_REGULATOR_SUBTYPE_LV_P50		= 0x28,
+	SPMI_REGULATOR_SUBTYPE_LV_P150		= 0x29,
+	SPMI_REGULATOR_SUBTYPE_LV_P300		= 0x2a,
+	SPMI_REGULATOR_SUBTYPE_LV_P600		= 0x2b,
+	SPMI_REGULATOR_SUBTYPE_LV_P1200		= 0x2c,
+	SPMI_REGULATOR_SUBTYPE_LV_P450		= 0x2d,
+	SPMI_REGULATOR_SUBTYPE_LV100		= 0x01,
+	SPMI_REGULATOR_SUBTYPE_LV300		= 0x02,
+	SPMI_REGULATOR_SUBTYPE_MV300		= 0x08,
+	SPMI_REGULATOR_SUBTYPE_MV500		= 0x09,
+	SPMI_REGULATOR_SUBTYPE_HDMI		= 0x10,
+	SPMI_REGULATOR_SUBTYPE_OTG		= 0x11,
+	SPMI_REGULATOR_SUBTYPE_5V_BOOST		= 0x01,
+	SPMI_REGULATOR_SUBTYPE_FTS_CTL		= 0x08,
+	SPMI_REGULATOR_SUBTYPE_FTS2p5_CTL	= 0x09,
+	SPMI_REGULATOR_SUBTYPE_BB_2A		= 0x01,
+	SPMI_REGULATOR_SUBTYPE_ULT_HF_CTL1	= 0x0d,
+	SPMI_REGULATOR_SUBTYPE_ULT_HF_CTL2	= 0x0e,
+	SPMI_REGULATOR_SUBTYPE_ULT_HF_CTL3	= 0x0f,
+	SPMI_REGULATOR_SUBTYPE_ULT_HF_CTL4	= 0x10,
+};
+
+enum spmi_common_regulator_registers {
+	SPMI_COMMON_REG_DIG_MAJOR_REV		= 0x01,
+	SPMI_COMMON_REG_TYPE			= 0x04,
+	SPMI_COMMON_REG_SUBTYPE			= 0x05,
+	SPMI_COMMON_REG_VOLTAGE_RANGE		= 0x40,
+	SPMI_COMMON_REG_VOLTAGE_SET		= 0x41,
+	SPMI_COMMON_REG_MODE			= 0x45,
+	SPMI_COMMON_REG_ENABLE			= 0x46,
+	SPMI_COMMON_REG_PULL_DOWN		= 0x48,
+	SPMI_COMMON_REG_SOFT_START		= 0x4c,
+	SPMI_COMMON_REG_STEP_CTRL		= 0x61,
+};
+
+enum spmi_vs_registers {
+	SPMI_VS_REG_OCP				= 0x4a,
+	SPMI_VS_REG_SOFT_START			= 0x4c,
+};
+
+enum spmi_boost_registers {
+	SPMI_BOOST_REG_CURRENT_LIMIT		= 0x4a,
+};
+
+enum spmi_boost_byp_registers {
+	SPMI_BOOST_BYP_REG_CURRENT_LIMIT	= 0x4b,
+};
+
+/* Used for indexing into ctrl_reg.  These are offets from 0x40 */
+enum spmi_common_control_register_index {
+	SPMI_COMMON_IDX_VOLTAGE_RANGE		= 0,
+	SPMI_COMMON_IDX_VOLTAGE_SET		= 1,
+	SPMI_COMMON_IDX_MODE			= 5,
+	SPMI_COMMON_IDX_ENABLE			= 6,
+};
+
+/* Common regulator control register layout */
+#define SPMI_COMMON_ENABLE_MASK			0x80
+#define SPMI_COMMON_ENABLE			0x80
+#define SPMI_COMMON_DISABLE			0x00
+#define SPMI_COMMON_ENABLE_FOLLOW_HW_EN3_MASK	0x08
+#define SPMI_COMMON_ENABLE_FOLLOW_HW_EN2_MASK	0x04
+#define SPMI_COMMON_ENABLE_FOLLOW_HW_EN1_MASK	0x02
+#define SPMI_COMMON_ENABLE_FOLLOW_HW_EN0_MASK	0x01
+#define SPMI_COMMON_ENABLE_FOLLOW_ALL_MASK	0x0f
+
+/* Common regulator mode register layout */
+#define SPMI_COMMON_MODE_HPM_MASK		0x80
+#define SPMI_COMMON_MODE_AUTO_MASK		0x40
+#define SPMI_COMMON_MODE_BYPASS_MASK		0x20
+#define SPMI_COMMON_MODE_FOLLOW_AWAKE_MASK	0x10
+#define SPMI_COMMON_MODE_FOLLOW_HW_EN3_MASK	0x08
+#define SPMI_COMMON_MODE_FOLLOW_HW_EN2_MASK	0x04
+#define SPMI_COMMON_MODE_FOLLOW_HW_EN1_MASK	0x02
+#define SPMI_COMMON_MODE_FOLLOW_HW_EN0_MASK	0x01
+#define SPMI_COMMON_MODE_FOLLOW_ALL_MASK	0x1f
+
+/* Common regulator pull down control register layout */
+#define SPMI_COMMON_PULL_DOWN_ENABLE_MASK	0x80
+
+/* LDO regulator current limit control register layout */
+#define SPMI_LDO_CURRENT_LIMIT_ENABLE_MASK	0x80
+
+/* LDO regulator soft start control register layout */
+#define SPMI_LDO_SOFT_START_ENABLE_MASK		0x80
+
+/* VS regulator over current protection control register layout */
+#define SPMI_VS_OCP_OVERRIDE			0x01
+#define SPMI_VS_OCP_NO_OVERRIDE			0x00
+
+/* VS regulator soft start control register layout */
+#define SPMI_VS_SOFT_START_ENABLE_MASK		0x80
+#define SPMI_VS_SOFT_START_SEL_MASK		0x03
+
+/* Boost regulator current limit control register layout */
+#define SPMI_BOOST_CURRENT_LIMIT_ENABLE_MASK	0x80
+#define SPMI_BOOST_CURRENT_LIMIT_MASK		0x07
+
+#define SPMI_VS_OCP_DEFAULT_MAX_RETRIES		10
+#define SPMI_VS_OCP_DEFAULT_RETRY_DELAY_MS	30
+#define SPMI_VS_OCP_FALL_DELAY_US		90
+#define SPMI_VS_OCP_FAULT_DELAY_US		20000
+
+#define SPMI_FTSMPS_STEP_CTRL_STEP_MASK		0x18
+#define SPMI_FTSMPS_STEP_CTRL_STEP_SHIFT	3
+#define SPMI_FTSMPS_STEP_CTRL_DELAY_MASK	0x07
+#define SPMI_FTSMPS_STEP_CTRL_DELAY_SHIFT	0
+
+/* Clock rate in kHz of the FTSMPS regulator reference clock. */
+#define SPMI_FTSMPS_CLOCK_RATE		19200
+
+/* Minimum voltage stepper delay for each step. */
+#define SPMI_FTSMPS_STEP_DELAY		8
+
+/*
+ * The ratio SPMI_FTSMPS_STEP_MARGIN_NUM/SPMI_FTSMPS_STEP_MARGIN_DEN is used to
+ * adjust the step rate in order to account for oscillator variance.
+ */
+#define SPMI_FTSMPS_STEP_MARGIN_NUM	4
+#define SPMI_FTSMPS_STEP_MARGIN_DEN	5
+
+/*
+ * This voltage in uV is returned by get_voltage functions when there is no way
+ * to determine the current voltage level.  It is needed because the regulator
+ * framework treats a 0 uV voltage as an error.
+ */
+#define VOLTAGE_UNKNOWN 1
+
+/* VSET value to decide the range of ULT SMPS */
+#define ULT_SMPS_RANGE_SPLIT 0x60
+
+/**
+ * struct spmi_voltage_range - regulator set point voltage mapping description
+ * @min_uV:		Minimum programmable output voltage resulting from
+ *			set point register value 0x00
+ * @max_uV:		Maximum programmable output voltage
+ * @step_uV:		Output voltage increase resulting from the set point
+ *			register value increasing by 1
+ * @set_point_min_uV:	Minimum allowed voltage
+ * @set_point_max_uV:	Maximum allowed voltage.  This may be tweaked in order
+ *			to pick which range should be used in the case of
+ *			overlapping set points.
+ * @n_voltages:		Number of preferred voltage set points present in this
+ *			range
+ * @range_sel:		Voltage range register value corresponding to this range
+ *
+ * The following relationships must be true for the values used in this struct:
+ * (max_uV - min_uV) % step_uV == 0
+ * (set_point_min_uV - min_uV) % step_uV == 0*
+ * (set_point_max_uV - min_uV) % step_uV == 0*
+ * n_voltages = (set_point_max_uV - set_point_min_uV) / step_uV + 1
+ *
+ * *Note, set_point_min_uV == set_point_max_uV == 0 is allowed in order to
+ * specify that the voltage range has meaning, but is not preferred.
+ */
+struct spmi_voltage_range {
+	int					min_uV;
+	int					max_uV;
+	int					step_uV;
+	int					set_point_min_uV;
+	int					set_point_max_uV;
+	unsigned				n_voltages;
+	u8					range_sel;
+};
+
+/*
+ * The ranges specified in the spmi_voltage_set_points struct must be listed
+ * so that range[i].set_point_max_uV < range[i+1].set_point_min_uV.
+ */
+struct spmi_voltage_set_points {
+	struct spmi_voltage_range		*range;
+	int					count;
+	unsigned				n_voltages;
+};
+
+struct spmi_regulator {
+	struct regulator_desc			desc;
+	struct device				*dev;
+	struct delayed_work			ocp_work;
+	struct regmap				*regmap;
+	struct spmi_voltage_set_points		*set_points;
+	enum spmi_regulator_logical_type	logical_type;
+	int					ocp_irq;
+	int					ocp_count;
+	int					ocp_max_retries;
+	int					ocp_retry_delay_ms;
+	int					hpm_min_load;
+	int					slew_rate;
+	ktime_t					vs_enable_time;
+	u16					base;
+	struct list_head			node;
+};
+
+struct spmi_regulator_mapping {
+	enum spmi_regulator_type		type;
+	enum spmi_regulator_subtype		subtype;
+	enum spmi_regulator_logical_type	logical_type;
+	u32					revision_min;
+	u32					revision_max;
+	struct regulator_ops			*ops;
+	struct spmi_voltage_set_points		*set_points;
+	int					hpm_min_load;
+};
+
+struct spmi_regulator_data {
+	const char			*name;
+	u16				base;
+	const char			*supply;
+	const char			*ocp;
+	u16				force_type;
+};
+
+#define SPMI_VREG(_type, _subtype, _dig_major_min, _dig_major_max, \
+		      _logical_type, _ops_val, _set_points_val, _hpm_min_load) \
+	{ \
+		.type		= SPMI_REGULATOR_TYPE_##_type, \
+		.subtype	= SPMI_REGULATOR_SUBTYPE_##_subtype, \
+		.revision_min	= _dig_major_min, \
+		.revision_max	= _dig_major_max, \
+		.logical_type	= SPMI_REGULATOR_LOGICAL_TYPE_##_logical_type, \
+		.ops		= &spmi_##_ops_val##_ops, \
+		.set_points	= &_set_points_val##_set_points, \
+		.hpm_min_load	= _hpm_min_load, \
+	}
+
+#define SPMI_VREG_VS(_subtype, _dig_major_min, _dig_major_max) \
+	{ \
+		.type		= SPMI_REGULATOR_TYPE_VS, \
+		.subtype	= SPMI_REGULATOR_SUBTYPE_##_subtype, \
+		.revision_min	= _dig_major_min, \
+		.revision_max	= _dig_major_max, \
+		.logical_type	= SPMI_REGULATOR_LOGICAL_TYPE_VS, \
+		.ops		= &spmi_vs_ops, \
+	}
+
+#define SPMI_VOLTAGE_RANGE(_range_sel, _min_uV, _set_point_min_uV, \
+			_set_point_max_uV, _max_uV, _step_uV) \
+	{ \
+		.min_uV			= _min_uV, \
+		.max_uV			= _max_uV, \
+		.set_point_min_uV	= _set_point_min_uV, \
+		.set_point_max_uV	= _set_point_max_uV, \
+		.step_uV		= _step_uV, \
+		.range_sel		= _range_sel, \
+	}
+
+#define DEFINE_SPMI_SET_POINTS(name) \
+struct spmi_voltage_set_points name##_set_points = { \
+	.range	= name##_ranges, \
+	.count	= ARRAY_SIZE(name##_ranges), \
+}
+
+/*
+ * These tables contain the physically available PMIC regulator voltage setpoint
+ * ranges.  Where two ranges overlap in hardware, one of the ranges is trimmed
+ * to ensure that the setpoints available to software are monotonically
+ * increasing and unique.  The set_voltage callback functions expect these
+ * properties to hold.
+ */
+static struct spmi_voltage_range pldo_ranges[] = {
+	SPMI_VOLTAGE_RANGE(2,  750000,  750000, 1537500, 1537500, 12500),
+	SPMI_VOLTAGE_RANGE(3, 1500000, 1550000, 3075000, 3075000, 25000),
+	SPMI_VOLTAGE_RANGE(4, 1750000, 3100000, 4900000, 4900000, 50000),
+};
+
+static struct spmi_voltage_range nldo1_ranges[] = {
+	SPMI_VOLTAGE_RANGE(2,  750000,  750000, 1537500, 1537500, 12500),
+};
+
+static struct spmi_voltage_range nldo2_ranges[] = {
+	SPMI_VOLTAGE_RANGE(0,  375000,       0,       0, 1537500, 12500),
+	SPMI_VOLTAGE_RANGE(1,  375000,  375000,  768750,  768750,  6250),
+	SPMI_VOLTAGE_RANGE(2,  750000,  775000, 1537500, 1537500, 12500),
+};
+
+static struct spmi_voltage_range nldo3_ranges[] = {
+	SPMI_VOLTAGE_RANGE(0,  375000,  375000, 1537500, 1537500, 12500),
+	SPMI_VOLTAGE_RANGE(1,  375000,       0,       0, 1537500, 12500),
+	SPMI_VOLTAGE_RANGE(2,  750000,       0,       0, 1537500, 12500),
+};
+
+static struct spmi_voltage_range ln_ldo_ranges[] = {
+	SPMI_VOLTAGE_RANGE(1,  690000,  690000, 1110000, 1110000, 60000),
+	SPMI_VOLTAGE_RANGE(0, 1380000, 1380000, 2220000, 2220000, 120000),
+};
+
+static struct spmi_voltage_range smps_ranges[] = {
+	SPMI_VOLTAGE_RANGE(0,  375000,  375000, 1562500, 1562500, 12500),
+	SPMI_VOLTAGE_RANGE(1, 1550000, 1575000, 3125000, 3125000, 25000),
+};
+
+static struct spmi_voltage_range ftsmps_ranges[] = {
+	SPMI_VOLTAGE_RANGE(0,       0,  350000, 1275000, 1275000,  5000),
+	SPMI_VOLTAGE_RANGE(1,       0, 1280000, 2040000, 2040000, 10000),
+};
+
+static struct spmi_voltage_range ftsmps2p5_ranges[] = {
+	SPMI_VOLTAGE_RANGE(0,   80000,  350000, 1355000, 1355000,  5000),
+	SPMI_VOLTAGE_RANGE(1,  160000, 1360000, 2200000, 2200000, 10000),
+};
+
+static struct spmi_voltage_range boost_ranges[] = {
+	SPMI_VOLTAGE_RANGE(0, 4000000, 4000000, 5550000, 5550000, 50000),
+};
+
+static struct spmi_voltage_range boost_byp_ranges[] = {
+	SPMI_VOLTAGE_RANGE(0, 2500000, 2500000, 5200000, 5650000, 50000),
+};
+
+static struct spmi_voltage_range ult_lo_smps_ranges[] = {
+	SPMI_VOLTAGE_RANGE(0,  375000,  375000, 1562500, 1562500, 12500),
+	SPMI_VOLTAGE_RANGE(1,  750000,       0,       0, 1525000, 25000),
+};
+
+static struct spmi_voltage_range ult_ho_smps_ranges[] = {
+	SPMI_VOLTAGE_RANGE(0, 1550000, 1550000, 2325000, 2325000, 25000),
+};
+
+static struct spmi_voltage_range ult_nldo_ranges[] = {
+	SPMI_VOLTAGE_RANGE(0,  375000,  375000, 1537500, 1537500, 12500),
+};
+
+static struct spmi_voltage_range ult_pldo_ranges[] = {
+	SPMI_VOLTAGE_RANGE(0, 1750000, 1750000, 3337500, 3337500, 12500),
+};
+
+static DEFINE_SPMI_SET_POINTS(pldo);
+static DEFINE_SPMI_SET_POINTS(nldo1);
+static DEFINE_SPMI_SET_POINTS(nldo2);
+static DEFINE_SPMI_SET_POINTS(nldo3);
+static DEFINE_SPMI_SET_POINTS(ln_ldo);
+static DEFINE_SPMI_SET_POINTS(smps);
+static DEFINE_SPMI_SET_POINTS(ftsmps);
+static DEFINE_SPMI_SET_POINTS(ftsmps2p5);
+static DEFINE_SPMI_SET_POINTS(boost);
+static DEFINE_SPMI_SET_POINTS(boost_byp);
+static DEFINE_SPMI_SET_POINTS(ult_lo_smps);
+static DEFINE_SPMI_SET_POINTS(ult_ho_smps);
+static DEFINE_SPMI_SET_POINTS(ult_nldo);
+static DEFINE_SPMI_SET_POINTS(ult_pldo);
+
+static inline int spmi_vreg_read(struct spmi_regulator *vreg, u16 addr, u8 *buf,
+				 int len)
+{
+	return regmap_bulk_read(vreg->regmap, vreg->base + addr, buf, len);
+}
+
+static inline int spmi_vreg_write(struct spmi_regulator *vreg, u16 addr,
+				u8 *buf, int len)
+{
+	return regmap_bulk_write(vreg->regmap, vreg->base + addr, buf, len);
+}
+
+static int spmi_vreg_update_bits(struct spmi_regulator *vreg, u16 addr, u8 val,
+		u8 mask)
+{
+	return regmap_update_bits(vreg->regmap, vreg->base + addr, mask, val);
+}
+
+static int spmi_regulator_common_is_enabled(struct regulator_dev *rdev)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	u8 reg;
+
+	spmi_vreg_read(vreg, SPMI_COMMON_REG_ENABLE, &reg, 1);
+
+	return (reg & SPMI_COMMON_ENABLE_MASK) == SPMI_COMMON_ENABLE;
+}
+
+static int spmi_regulator_common_enable(struct regulator_dev *rdev)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+
+	return spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_ENABLE,
+		SPMI_COMMON_ENABLE, SPMI_COMMON_ENABLE_MASK);
+}
+
+static int spmi_regulator_vs_enable(struct regulator_dev *rdev)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+
+	if (vreg->ocp_irq) {
+		vreg->ocp_count = 0;
+		vreg->vs_enable_time = ktime_get();
+	}
+
+	return spmi_regulator_common_enable(rdev);
+}
+
+static int spmi_regulator_vs_ocp(struct regulator_dev *rdev)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	u8 reg = SPMI_VS_OCP_OVERRIDE;
+
+	return spmi_vreg_write(vreg, SPMI_VS_REG_OCP, &reg, 1);
+}
+
+static int spmi_regulator_common_disable(struct regulator_dev *rdev)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+
+	return spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_ENABLE,
+		SPMI_COMMON_DISABLE, SPMI_COMMON_ENABLE_MASK);
+}
+
+static int spmi_regulator_select_voltage(struct spmi_regulator *vreg,
+		int min_uV, int max_uV, u8 *range_sel, u8 *voltage_sel,
+		unsigned *selector)
+{
+	const struct spmi_voltage_range *range;
+	int uV = min_uV;
+	int lim_min_uV, lim_max_uV, i, range_id, range_max_uV;
+
+	/* Check if request voltage is outside of physically settable range. */
+	lim_min_uV = vreg->set_points->range[0].set_point_min_uV;
+	lim_max_uV =
+	  vreg->set_points->range[vreg->set_points->count - 1].set_point_max_uV;
+
+	if (uV < lim_min_uV && max_uV >= lim_min_uV)
+		uV = lim_min_uV;
+
+	if (uV < lim_min_uV || uV > lim_max_uV) {
+		dev_err(vreg->dev,
+			"request v=[%d, %d] is outside possible v=[%d, %d]\n",
+			 min_uV, max_uV, lim_min_uV, lim_max_uV);
+		return -EINVAL;
+	}
+
+	/* Find the range which uV is inside of. */
+	for (i = vreg->set_points->count - 1; i > 0; i--) {
+		range_max_uV = vreg->set_points->range[i - 1].set_point_max_uV;
+		if (uV > range_max_uV && range_max_uV > 0)
+			break;
+	}
+
+	range_id = i;
+	range = &vreg->set_points->range[range_id];
+	*range_sel = range->range_sel;
+
+	/*
+	 * Force uV to be an allowed set point by applying a ceiling function to
+	 * the uV value.
+	 */
+	*voltage_sel = DIV_ROUND_UP(uV - range->min_uV, range->step_uV);
+	uV = *voltage_sel * range->step_uV + range->min_uV;
+
+	if (uV > max_uV) {
+		dev_err(vreg->dev,
+			"request v=[%d, %d] cannot be met by any set point; "
+			"next set point: %d\n",
+			min_uV, max_uV, uV);
+		return -EINVAL;
+	}
+
+	*selector = 0;
+	for (i = 0; i < range_id; i++)
+		*selector += vreg->set_points->range[i].n_voltages;
+	*selector += (uV - range->set_point_min_uV) / range->step_uV;
+
+	return 0;
+}
+
+static const struct spmi_voltage_range *
+spmi_regulator_find_range(struct spmi_regulator *vreg)
+{
+	u8 range_sel;
+	const struct spmi_voltage_range *range, *end;
+
+	range = vreg->set_points->range;
+	end = range + vreg->set_points->count;
+
+	spmi_vreg_read(vreg, SPMI_COMMON_REG_VOLTAGE_RANGE, &range_sel, 1);
+
+	for (; range < end; range++)
+		if (range->range_sel == range_sel)
+			return range;
+
+	return NULL;
+}
+
+static int spmi_regulator_select_voltage_same_range(struct spmi_regulator *vreg,
+		int min_uV, int max_uV, u8 *range_sel, u8 *voltage_sel,
+		unsigned *selector)
+{
+	const struct spmi_voltage_range *range;
+	int uV = min_uV;
+	int i;
+
+	range = spmi_regulator_find_range(vreg);
+	if (!range)
+		goto different_range;
+
+	if (uV < range->min_uV && max_uV >= range->min_uV)
+		uV = range->min_uV;
+
+	if (uV < range->min_uV || uV > range->max_uV) {
+		/* Current range doesn't support the requested voltage. */
+		goto different_range;
+	}
+
+	/*
+	 * Force uV to be an allowed set point by applying a ceiling function to
+	 * the uV value.
+	 */
+	*voltage_sel = DIV_ROUND_UP(uV - range->min_uV, range->step_uV);
+	uV = *voltage_sel * range->step_uV + range->min_uV;
+
+	if (uV > max_uV) {
+		/*
+		 * No set point in the current voltage range is within the
+		 * requested min_uV to max_uV range.
+		 */
+		goto different_range;
+	}
+
+	*selector = 0;
+	for (i = 0; i < vreg->set_points->count; i++) {
+		if (uV >= vreg->set_points->range[i].set_point_min_uV
+		    && uV <= vreg->set_points->range[i].set_point_max_uV) {
+			*selector +=
+			    (uV - vreg->set_points->range[i].set_point_min_uV)
+				/ vreg->set_points->range[i].step_uV;
+			break;
+		}
+
+		*selector += vreg->set_points->range[i].n_voltages;
+	}
+
+	if (*selector >= vreg->set_points->n_voltages)
+		goto different_range;
+
+	return 0;
+
+different_range:
+	return spmi_regulator_select_voltage(vreg, min_uV, max_uV,
+			range_sel, voltage_sel, selector);
+}
+
+static int spmi_regulator_common_set_voltage(struct regulator_dev *rdev,
+		int min_uV, int max_uV, unsigned *selector)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	int ret;
+	u8 buf[2];
+	u8 range_sel, voltage_sel;
+
+	/*
+	 * Favor staying in the current voltage range if possible.  This avoids
+	 * voltage spikes that occur when changing the voltage range.
+	 */
+	ret = spmi_regulator_select_voltage_same_range(vreg, min_uV, max_uV,
+		&range_sel, &voltage_sel, selector);
+	if (ret)
+		return ret;
+
+	buf[0] = range_sel;
+	buf[1] = voltage_sel;
+	return spmi_vreg_write(vreg, SPMI_COMMON_REG_VOLTAGE_RANGE, buf, 2);
+}
+
+static int spmi_regulator_set_voltage_time_sel(struct regulator_dev *rdev,
+		unsigned int old_selector, unsigned int new_selector)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	const struct spmi_voltage_range *range;
+	int diff_uV;
+
+	range = spmi_regulator_find_range(vreg);
+	if (!range)
+		return -EINVAL;
+
+	diff_uV = abs(new_selector - old_selector) * range->step_uV;
+
+	return DIV_ROUND_UP(diff_uV, vreg->slew_rate);
+}
+
+static int spmi_regulator_common_get_voltage(struct regulator_dev *rdev)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	const struct spmi_voltage_range *range;
+	u8 voltage_sel;
+
+	spmi_vreg_read(vreg, SPMI_COMMON_REG_VOLTAGE_SET, &voltage_sel, 1);
+
+	range = spmi_regulator_find_range(vreg);
+	if (!range)
+		return VOLTAGE_UNKNOWN;
+
+	return range->step_uV * voltage_sel + range->min_uV;
+}
+
+static int spmi_regulator_single_range_set_voltage(struct regulator_dev *rdev,
+		int min_uV, int max_uV, unsigned *selector)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	int ret;
+	u8 range_sel, sel;
+
+	ret = spmi_regulator_select_voltage(vreg, min_uV, max_uV, &range_sel,
+		&sel, selector);
+	if (ret) {
+		dev_err(vreg->dev, "could not set voltage, ret=%d\n", ret);
+		return ret;
+	}
+
+	/*
+	 * Certain types of regulators do not have a range select register so
+	 * only voltage set register needs to be written.
+	 */
+	return spmi_vreg_write(vreg, SPMI_COMMON_REG_VOLTAGE_SET, &sel, 1);
+}
+
+static int spmi_regulator_single_range_get_voltage(struct regulator_dev *rdev)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	const struct spmi_voltage_range *range = vreg->set_points->range;
+	u8 voltage_sel;
+
+	spmi_vreg_read(vreg, SPMI_COMMON_REG_VOLTAGE_SET, &voltage_sel, 1);
+
+	return range->step_uV * voltage_sel + range->min_uV;
+}
+
+static int spmi_regulator_ult_lo_smps_set_voltage(struct regulator_dev *rdev,
+		int min_uV, int max_uV, unsigned *selector)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	int ret;
+	u8 range_sel, voltage_sel;
+
+	/*
+	 * Favor staying in the current voltage range if possible. This avoids
+	 * voltage spikes that occur when changing the voltage range.
+	 */
+	ret = spmi_regulator_select_voltage_same_range(vreg, min_uV, max_uV,
+		&range_sel, &voltage_sel, selector);
+	if (ret)
+		return ret;
+
+	/*
+	 * Calculate VSET based on range
+	 * In case of range 0: voltage_sel is a 7 bit value, can be written
+	 *			witout any modification.
+	 * In case of range 1: voltage_sel is a 5 bit value, bits[7-5] set to
+	 *			[011].
+	 */
+	if (range_sel == 1)
+		voltage_sel |= ULT_SMPS_RANGE_SPLIT;
+
+	return spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_VOLTAGE_SET,
+	       voltage_sel, 0xff);
+}
+
+static int spmi_regulator_ult_lo_smps_get_voltage(struct regulator_dev *rdev)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	const struct spmi_voltage_range *range;
+	u8 voltage_sel;
+
+	spmi_vreg_read(vreg, SPMI_COMMON_REG_VOLTAGE_SET, &voltage_sel, 1);
+
+	range = spmi_regulator_find_range(vreg);
+	if (!range)
+		return VOLTAGE_UNKNOWN;
+
+	if (range->range_sel == 1)
+		voltage_sel &= ~ULT_SMPS_RANGE_SPLIT;
+
+	return range->step_uV * voltage_sel + range->min_uV;
+}
+
+static int spmi_regulator_common_list_voltage(struct regulator_dev *rdev,
+			unsigned selector)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	int uV = 0;
+	int i;
+
+	if (selector >= vreg->set_points->n_voltages)
+		return 0;
+
+	for (i = 0; i < vreg->set_points->count; i++) {
+		if (selector < vreg->set_points->range[i].n_voltages) {
+			uV = selector * vreg->set_points->range[i].step_uV
+				+ vreg->set_points->range[i].set_point_min_uV;
+			break;
+		}
+
+		selector -= vreg->set_points->range[i].n_voltages;
+	}
+
+	return uV;
+}
+
+static int
+spmi_regulator_common_set_bypass(struct regulator_dev *rdev, bool enable)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	u8 mask = SPMI_COMMON_MODE_BYPASS_MASK;
+	u8 val = 0;
+
+	if (enable)
+		val = mask;
+
+	return spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_MODE, val, mask);
+}
+
+static int
+spmi_regulator_common_get_bypass(struct regulator_dev *rdev, bool *enable)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	u8 val;
+	int ret;
+
+	ret = spmi_vreg_read(vreg, SPMI_COMMON_REG_MODE, &val, 1);
+	*enable = val & SPMI_COMMON_MODE_BYPASS_MASK;
+
+	return ret;
+}
+
+static unsigned int spmi_regulator_common_get_mode(struct regulator_dev *rdev)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	u8 reg;
+
+	spmi_vreg_read(vreg, SPMI_COMMON_REG_MODE, &reg, 1);
+
+	if (reg & SPMI_COMMON_MODE_HPM_MASK)
+		return REGULATOR_MODE_NORMAL;
+
+	if (reg & SPMI_COMMON_MODE_AUTO_MASK)
+		return REGULATOR_MODE_FAST;
+
+	return REGULATOR_MODE_IDLE;
+}
+
+static int
+spmi_regulator_common_set_mode(struct regulator_dev *rdev, unsigned int mode)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	u8 mask = SPMI_COMMON_MODE_HPM_MASK | SPMI_COMMON_MODE_AUTO_MASK;
+	u8 val = 0;
+
+	if (mode == REGULATOR_MODE_NORMAL)
+		val = SPMI_COMMON_MODE_HPM_MASK;
+	else if (mode == REGULATOR_MODE_FAST)
+		val = SPMI_COMMON_MODE_AUTO_MASK;
+
+	return spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_MODE, val, mask);
+}
+
+static int
+spmi_regulator_common_set_load(struct regulator_dev *rdev, int load_uA)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	unsigned int mode;
+
+	if (load_uA >= vreg->hpm_min_load)
+		mode = REGULATOR_MODE_NORMAL;
+	else
+		mode = REGULATOR_MODE_IDLE;
+
+	return spmi_regulator_common_set_mode(rdev, mode);
+}
+
+static int spmi_regulator_common_set_pull_down(struct regulator_dev *rdev)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	unsigned int mask = SPMI_COMMON_PULL_DOWN_ENABLE_MASK;
+
+	return spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_PULL_DOWN,
+				     mask, mask);
+}
+
+static int spmi_regulator_common_set_soft_start(struct regulator_dev *rdev)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	unsigned int mask = SPMI_LDO_SOFT_START_ENABLE_MASK;
+
+	return spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_SOFT_START,
+				     mask, mask);
+}
+
+static int spmi_regulator_set_ilim(struct regulator_dev *rdev, int ilim_uA)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	enum spmi_regulator_logical_type type = vreg->logical_type;
+	unsigned int current_reg;
+	u8 reg;
+	u8 mask = SPMI_BOOST_CURRENT_LIMIT_MASK |
+		  SPMI_BOOST_CURRENT_LIMIT_ENABLE_MASK;
+	int max = (SPMI_BOOST_CURRENT_LIMIT_MASK + 1) * 500;
+
+	if (type == SPMI_REGULATOR_LOGICAL_TYPE_BOOST)
+		current_reg = SPMI_BOOST_REG_CURRENT_LIMIT;
+	else
+		current_reg = SPMI_BOOST_BYP_REG_CURRENT_LIMIT;
+
+	if (ilim_uA > max || ilim_uA <= 0)
+		return -EINVAL;
+
+	reg = (ilim_uA - 1) / 500;
+	reg |= SPMI_BOOST_CURRENT_LIMIT_ENABLE_MASK;
+
+	return spmi_vreg_update_bits(vreg, current_reg, reg, mask);
+}
+
+static int spmi_regulator_vs_clear_ocp(struct spmi_regulator *vreg)
+{
+	int ret;
+
+	ret = spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_ENABLE,
+		SPMI_COMMON_DISABLE, SPMI_COMMON_ENABLE_MASK);
+
+	vreg->vs_enable_time = ktime_get();
+
+	ret = spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_ENABLE,
+		SPMI_COMMON_ENABLE, SPMI_COMMON_ENABLE_MASK);
+
+	return ret;
+}
+
+static void spmi_regulator_vs_ocp_work(struct work_struct *work)
+{
+	struct delayed_work *dwork = to_delayed_work(work);
+	struct spmi_regulator *vreg
+		= container_of(dwork, struct spmi_regulator, ocp_work);
+
+	spmi_regulator_vs_clear_ocp(vreg);
+}
+
+static irqreturn_t spmi_regulator_vs_ocp_isr(int irq, void *data)
+{
+	struct spmi_regulator *vreg = data;
+	ktime_t ocp_irq_time;
+	s64 ocp_trigger_delay_us;
+
+	ocp_irq_time = ktime_get();
+	ocp_trigger_delay_us = ktime_us_delta(ocp_irq_time,
+						vreg->vs_enable_time);
+
+	/*
+	 * Reset the OCP count if there is a large delay between switch enable
+	 * and when OCP triggers.  This is indicative of a hotplug event as
+	 * opposed to a fault.
+	 */
+	if (ocp_trigger_delay_us > SPMI_VS_OCP_FAULT_DELAY_US)
+		vreg->ocp_count = 0;
+
+	/* Wait for switch output to settle back to 0 V after OCP triggered. */
+	udelay(SPMI_VS_OCP_FALL_DELAY_US);
+
+	vreg->ocp_count++;
+
+	if (vreg->ocp_count == 1) {
+		/* Immediately clear the over current condition. */
+		spmi_regulator_vs_clear_ocp(vreg);
+	} else if (vreg->ocp_count <= vreg->ocp_max_retries) {
+		/* Schedule the over current clear task to run later. */
+		schedule_delayed_work(&vreg->ocp_work,
+			msecs_to_jiffies(vreg->ocp_retry_delay_ms) + 1);
+	} else {
+		dev_err(vreg->dev,
+			"OCP triggered %d times; no further retries\n",
+			vreg->ocp_count);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static struct regulator_ops spmi_smps_ops = {
+	.enable			= spmi_regulator_common_enable,
+	.disable		= spmi_regulator_common_disable,
+	.is_enabled		= spmi_regulator_common_is_enabled,
+	.set_voltage		= spmi_regulator_common_set_voltage,
+	.get_voltage		= spmi_regulator_common_get_voltage,
+	.list_voltage		= spmi_regulator_common_list_voltage,
+	.set_mode		= spmi_regulator_common_set_mode,
+	.get_mode		= spmi_regulator_common_get_mode,
+	.set_load		= spmi_regulator_common_set_load,
+	.set_pull_down		= spmi_regulator_common_set_pull_down,
+};
+
+static struct regulator_ops spmi_ldo_ops = {
+	.enable			= spmi_regulator_common_enable,
+	.disable		= spmi_regulator_common_disable,
+	.is_enabled		= spmi_regulator_common_is_enabled,
+	.set_voltage		= spmi_regulator_common_set_voltage,
+	.get_voltage		= spmi_regulator_common_get_voltage,
+	.list_voltage		= spmi_regulator_common_list_voltage,
+	.set_mode		= spmi_regulator_common_set_mode,
+	.get_mode		= spmi_regulator_common_get_mode,
+	.set_load		= spmi_regulator_common_set_load,
+	.set_bypass		= spmi_regulator_common_set_bypass,
+	.get_bypass		= spmi_regulator_common_get_bypass,
+	.set_pull_down		= spmi_regulator_common_set_pull_down,
+	.set_soft_start		= spmi_regulator_common_set_soft_start,
+};
+
+static struct regulator_ops spmi_ln_ldo_ops = {
+	.enable			= spmi_regulator_common_enable,
+	.disable		= spmi_regulator_common_disable,
+	.is_enabled		= spmi_regulator_common_is_enabled,
+	.set_voltage		= spmi_regulator_common_set_voltage,
+	.get_voltage		= spmi_regulator_common_get_voltage,
+	.list_voltage		= spmi_regulator_common_list_voltage,
+	.set_bypass		= spmi_regulator_common_set_bypass,
+	.get_bypass		= spmi_regulator_common_get_bypass,
+};
+
+static struct regulator_ops spmi_vs_ops = {
+	.enable			= spmi_regulator_vs_enable,
+	.disable		= spmi_regulator_common_disable,
+	.is_enabled		= spmi_regulator_common_is_enabled,
+	.set_pull_down		= spmi_regulator_common_set_pull_down,
+	.set_soft_start		= spmi_regulator_common_set_soft_start,
+	.set_over_current_protection = spmi_regulator_vs_ocp,
+};
+
+static struct regulator_ops spmi_boost_ops = {
+	.enable			= spmi_regulator_common_enable,
+	.disable		= spmi_regulator_common_disable,
+	.is_enabled		= spmi_regulator_common_is_enabled,
+	.set_voltage		= spmi_regulator_single_range_set_voltage,
+	.get_voltage		= spmi_regulator_single_range_get_voltage,
+	.list_voltage		= spmi_regulator_common_list_voltage,
+	.set_input_current_limit = spmi_regulator_set_ilim,
+};
+
+static struct regulator_ops spmi_ftsmps_ops = {
+	.enable			= spmi_regulator_common_enable,
+	.disable		= spmi_regulator_common_disable,
+	.is_enabled		= spmi_regulator_common_is_enabled,
+	.set_voltage		= spmi_regulator_common_set_voltage,
+	.set_voltage_time_sel	= spmi_regulator_set_voltage_time_sel,
+	.get_voltage		= spmi_regulator_common_get_voltage,
+	.list_voltage		= spmi_regulator_common_list_voltage,
+	.set_mode		= spmi_regulator_common_set_mode,
+	.get_mode		= spmi_regulator_common_get_mode,
+	.set_load		= spmi_regulator_common_set_load,
+	.set_pull_down		= spmi_regulator_common_set_pull_down,
+};
+
+static struct regulator_ops spmi_ult_lo_smps_ops = {
+	.enable			= spmi_regulator_common_enable,
+	.disable		= spmi_regulator_common_disable,
+	.is_enabled		= spmi_regulator_common_is_enabled,
+	.set_voltage		= spmi_regulator_ult_lo_smps_set_voltage,
+	.get_voltage		= spmi_regulator_ult_lo_smps_get_voltage,
+	.list_voltage		= spmi_regulator_common_list_voltage,
+	.set_mode		= spmi_regulator_common_set_mode,
+	.get_mode		= spmi_regulator_common_get_mode,
+	.set_load		= spmi_regulator_common_set_load,
+	.set_pull_down		= spmi_regulator_common_set_pull_down,
+};
+
+static struct regulator_ops spmi_ult_ho_smps_ops = {
+	.enable			= spmi_regulator_common_enable,
+	.disable		= spmi_regulator_common_disable,
+	.is_enabled		= spmi_regulator_common_is_enabled,
+	.set_voltage		= spmi_regulator_single_range_set_voltage,
+	.get_voltage		= spmi_regulator_single_range_get_voltage,
+	.list_voltage		= spmi_regulator_common_list_voltage,
+	.set_mode		= spmi_regulator_common_set_mode,
+	.get_mode		= spmi_regulator_common_get_mode,
+	.set_load		= spmi_regulator_common_set_load,
+	.set_pull_down		= spmi_regulator_common_set_pull_down,
+};
+
+static struct regulator_ops spmi_ult_ldo_ops = {
+	.enable			= spmi_regulator_common_enable,
+	.disable		= spmi_regulator_common_disable,
+	.is_enabled		= spmi_regulator_common_is_enabled,
+	.set_voltage		= spmi_regulator_single_range_set_voltage,
+	.get_voltage		= spmi_regulator_single_range_get_voltage,
+	.list_voltage		= spmi_regulator_common_list_voltage,
+	.set_mode		= spmi_regulator_common_set_mode,
+	.get_mode		= spmi_regulator_common_get_mode,
+	.set_load		= spmi_regulator_common_set_load,
+	.set_bypass		= spmi_regulator_common_set_bypass,
+	.get_bypass		= spmi_regulator_common_get_bypass,
+	.set_pull_down		= spmi_regulator_common_set_pull_down,
+	.set_soft_start		= spmi_regulator_common_set_soft_start,
+};
+
+/* Maximum possible digital major revision value */
+#define INF 0xFF
+
+static const struct spmi_regulator_mapping supported_regulators[] = {
+	/*           type subtype dig_min dig_max ltype ops setpoints hpm_min */
+	SPMI_VREG(BUCK,  GP_CTL,   0, INF, SMPS,   smps,   smps,   100000),
+	SPMI_VREG(LDO,   N300,     0, INF, LDO,    ldo,    nldo1,   10000),
+	SPMI_VREG(LDO,   N600,     0,   0, LDO,    ldo,    nldo2,   10000),
+	SPMI_VREG(LDO,   N1200,    0,   0, LDO,    ldo,    nldo2,   10000),
+	SPMI_VREG(LDO,   N600,     1, INF, LDO,    ldo,    nldo3,   10000),
+	SPMI_VREG(LDO,   N1200,    1, INF, LDO,    ldo,    nldo3,   10000),
+	SPMI_VREG(LDO,   N600_ST,  0,   0, LDO,    ldo,    nldo2,   10000),
+	SPMI_VREG(LDO,   N1200_ST, 0,   0, LDO,    ldo,    nldo2,   10000),
+	SPMI_VREG(LDO,   N600_ST,  1, INF, LDO,    ldo,    nldo3,   10000),
+	SPMI_VREG(LDO,   N1200_ST, 1, INF, LDO,    ldo,    nldo3,   10000),
+	SPMI_VREG(LDO,   P50,      0, INF, LDO,    ldo,    pldo,     5000),
+	SPMI_VREG(LDO,   P150,     0, INF, LDO,    ldo,    pldo,    10000),
+	SPMI_VREG(LDO,   P300,     0, INF, LDO,    ldo,    pldo,    10000),
+	SPMI_VREG(LDO,   P600,     0, INF, LDO,    ldo,    pldo,    10000),
+	SPMI_VREG(LDO,   P1200,    0, INF, LDO,    ldo,    pldo,    10000),
+	SPMI_VREG(LDO,   LN,       0, INF, LN_LDO, ln_ldo, ln_ldo,      0),
+	SPMI_VREG(LDO,   LV_P50,   0, INF, LDO,    ldo,    pldo,     5000),
+	SPMI_VREG(LDO,   LV_P150,  0, INF, LDO,    ldo,    pldo,    10000),
+	SPMI_VREG(LDO,   LV_P300,  0, INF, LDO,    ldo,    pldo,    10000),
+	SPMI_VREG(LDO,   LV_P600,  0, INF, LDO,    ldo,    pldo,    10000),
+	SPMI_VREG(LDO,   LV_P1200, 0, INF, LDO,    ldo,    pldo,    10000),
+	SPMI_VREG_VS(LV100,        0, INF),
+	SPMI_VREG_VS(LV300,        0, INF),
+	SPMI_VREG_VS(MV300,        0, INF),
+	SPMI_VREG_VS(MV500,        0, INF),
+	SPMI_VREG_VS(HDMI,         0, INF),
+	SPMI_VREG_VS(OTG,          0, INF),
+	SPMI_VREG(BOOST, 5V_BOOST, 0, INF, BOOST,  boost,  boost,       0),
+	SPMI_VREG(FTS,   FTS_CTL,  0, INF, FTSMPS, ftsmps, ftsmps, 100000),
+	SPMI_VREG(FTS, FTS2p5_CTL, 0, INF, FTSMPS, ftsmps, ftsmps2p5, 100000),
+	SPMI_VREG(BOOST_BYP, BB_2A, 0, INF, BOOST_BYP, boost, boost_byp, 0),
+	SPMI_VREG(ULT_BUCK, ULT_HF_CTL1, 0, INF, ULT_LO_SMPS, ult_lo_smps,
+						ult_lo_smps,   100000),
+	SPMI_VREG(ULT_BUCK, ULT_HF_CTL2, 0, INF, ULT_LO_SMPS, ult_lo_smps,
+						ult_lo_smps,   100000),
+	SPMI_VREG(ULT_BUCK, ULT_HF_CTL3, 0, INF, ULT_LO_SMPS, ult_lo_smps,
+						ult_lo_smps,   100000),
+	SPMI_VREG(ULT_BUCK, ULT_HF_CTL4, 0, INF, ULT_HO_SMPS, ult_ho_smps,
+						ult_ho_smps,   100000),
+	SPMI_VREG(ULT_LDO, N300_ST, 0, INF, ULT_LDO, ult_ldo, ult_nldo, 10000),
+	SPMI_VREG(ULT_LDO, N600_ST, 0, INF, ULT_LDO, ult_ldo, ult_nldo, 10000),
+	SPMI_VREG(ULT_LDO, N900_ST, 0, INF, ULT_LDO, ult_ldo, ult_nldo, 10000),
+	SPMI_VREG(ULT_LDO, N1200_ST, 0, INF, ULT_LDO, ult_ldo, ult_nldo, 10000),
+	SPMI_VREG(ULT_LDO, LV_P150,  0, INF, ULT_LDO, ult_ldo, ult_pldo, 10000),
+	SPMI_VREG(ULT_LDO, LV_P300,  0, INF, ULT_LDO, ult_ldo, ult_pldo, 10000),
+	SPMI_VREG(ULT_LDO, LV_P450,  0, INF, ULT_LDO, ult_ldo, ult_pldo, 10000),
+	SPMI_VREG(ULT_LDO, P600,     0, INF, ULT_LDO, ult_ldo, ult_pldo, 10000),
+	SPMI_VREG(ULT_LDO, P150,     0, INF, ULT_LDO, ult_ldo, ult_pldo, 10000),
+	SPMI_VREG(ULT_LDO, P50,     0, INF, ULT_LDO, ult_ldo, ult_pldo, 5000),
+};
+
+static void spmi_calculate_num_voltages(struct spmi_voltage_set_points *points)
+{
+	unsigned int n;
+	struct spmi_voltage_range *range = points->range;
+
+	for (; range < points->range + points->count; range++) {
+		n = 0;
+		if (range->set_point_max_uV) {
+			n = range->set_point_max_uV - range->set_point_min_uV;
+			n = (n / range->step_uV) + 1;
+		}
+		range->n_voltages = n;
+		points->n_voltages += n;
+	}
+}
+
+static int spmi_regulator_match(struct spmi_regulator *vreg, u16 force_type)
+{
+	const struct spmi_regulator_mapping *mapping;
+	int ret, i;
+	u32 dig_major_rev;
+	u8 version[SPMI_COMMON_REG_SUBTYPE - SPMI_COMMON_REG_DIG_MAJOR_REV + 1];
+	u8 type, subtype;
+
+	ret = spmi_vreg_read(vreg, SPMI_COMMON_REG_DIG_MAJOR_REV, version,
+		ARRAY_SIZE(version));
+	if (ret) {
+		dev_err(vreg->dev, "could not read version registers\n");
+		return ret;
+	}
+	dig_major_rev	= version[SPMI_COMMON_REG_DIG_MAJOR_REV
+					- SPMI_COMMON_REG_DIG_MAJOR_REV];
+	if (!force_type) {
+		type		= version[SPMI_COMMON_REG_TYPE -
+					  SPMI_COMMON_REG_DIG_MAJOR_REV];
+		subtype		= version[SPMI_COMMON_REG_SUBTYPE -
+					  SPMI_COMMON_REG_DIG_MAJOR_REV];
+	} else {
+		type = force_type >> 8;
+		subtype = force_type;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(supported_regulators); i++) {
+		mapping = &supported_regulators[i];
+		if (mapping->type == type && mapping->subtype == subtype
+		    && mapping->revision_min <= dig_major_rev
+		    && mapping->revision_max >= dig_major_rev)
+			goto found;
+	}
+
+	dev_err(vreg->dev,
+		"unsupported regulator: name=%s type=0x%02X, subtype=0x%02X, dig major rev=0x%02X\n",
+		vreg->desc.name, type, subtype, dig_major_rev);
+
+	return -ENODEV;
+
+found:
+	vreg->logical_type	= mapping->logical_type;
+	vreg->set_points	= mapping->set_points;
+	vreg->hpm_min_load	= mapping->hpm_min_load;
+	vreg->desc.ops		= mapping->ops;
+
+	if (mapping->set_points) {
+		if (!mapping->set_points->n_voltages)
+			spmi_calculate_num_voltages(mapping->set_points);
+		vreg->desc.n_voltages = mapping->set_points->n_voltages;
+	}
+
+	return 0;
+}
+
+static int spmi_regulator_ftsmps_init_slew_rate(struct spmi_regulator *vreg)
+{
+	int ret;
+	u8 reg = 0;
+	int step, delay, slew_rate;
+	const struct spmi_voltage_range *range;
+
+	ret = spmi_vreg_read(vreg, SPMI_COMMON_REG_STEP_CTRL, &reg, 1);
+	if (ret) {
+		dev_err(vreg->dev, "spmi read failed, ret=%d\n", ret);
+		return ret;
+	}
+
+	range = spmi_regulator_find_range(vreg);
+	if (!range)
+		return -EINVAL;
+
+	step = reg & SPMI_FTSMPS_STEP_CTRL_STEP_MASK;
+	step >>= SPMI_FTSMPS_STEP_CTRL_STEP_SHIFT;
+
+	delay = reg & SPMI_FTSMPS_STEP_CTRL_DELAY_MASK;
+	delay >>= SPMI_FTSMPS_STEP_CTRL_DELAY_SHIFT;
+
+	/* slew_rate has units of uV/us */
+	slew_rate = SPMI_FTSMPS_CLOCK_RATE * range->step_uV * (1 << step);
+	slew_rate /= 1000 * (SPMI_FTSMPS_STEP_DELAY << delay);
+	slew_rate *= SPMI_FTSMPS_STEP_MARGIN_NUM;
+	slew_rate /= SPMI_FTSMPS_STEP_MARGIN_DEN;
+
+	/* Ensure that the slew rate is greater than 0 */
+	vreg->slew_rate = max(slew_rate, 1);
+
+	return ret;
+}
+
+static int spmi_regulator_init_registers(struct spmi_regulator *vreg,
+				const struct spmi_regulator_init_data *data)
+{
+	int ret;
+	enum spmi_regulator_logical_type type;
+	u8 ctrl_reg[8], reg, mask;
+
+	type = vreg->logical_type;
+
+	ret = spmi_vreg_read(vreg, SPMI_COMMON_REG_VOLTAGE_RANGE, ctrl_reg, 8);
+	if (ret)
+		return ret;
+
+	/* Set up enable pin control. */
+	if ((type == SPMI_REGULATOR_LOGICAL_TYPE_SMPS
+	     || type == SPMI_REGULATOR_LOGICAL_TYPE_LDO
+	     || type == SPMI_REGULATOR_LOGICAL_TYPE_VS)
+	    && !(data->pin_ctrl_enable
+			& SPMI_REGULATOR_PIN_CTRL_ENABLE_HW_DEFAULT)) {
+		ctrl_reg[SPMI_COMMON_IDX_ENABLE] &=
+			~SPMI_COMMON_ENABLE_FOLLOW_ALL_MASK;
+		ctrl_reg[SPMI_COMMON_IDX_ENABLE] |=
+		    data->pin_ctrl_enable & SPMI_COMMON_ENABLE_FOLLOW_ALL_MASK;
+	}
+
+	/* Set up mode pin control. */
+	if ((type == SPMI_REGULATOR_LOGICAL_TYPE_SMPS
+	    || type == SPMI_REGULATOR_LOGICAL_TYPE_LDO)
+		&& !(data->pin_ctrl_hpm
+			& SPMI_REGULATOR_PIN_CTRL_HPM_HW_DEFAULT)) {
+		ctrl_reg[SPMI_COMMON_IDX_MODE] &=
+			~SPMI_COMMON_MODE_FOLLOW_ALL_MASK;
+		ctrl_reg[SPMI_COMMON_IDX_MODE] |=
+			data->pin_ctrl_hpm & SPMI_COMMON_MODE_FOLLOW_ALL_MASK;
+	}
+
+	if (type == SPMI_REGULATOR_LOGICAL_TYPE_VS
+	   && !(data->pin_ctrl_hpm & SPMI_REGULATOR_PIN_CTRL_HPM_HW_DEFAULT)) {
+		ctrl_reg[SPMI_COMMON_IDX_MODE] &=
+			~SPMI_COMMON_MODE_FOLLOW_AWAKE_MASK;
+		ctrl_reg[SPMI_COMMON_IDX_MODE] |=
+		       data->pin_ctrl_hpm & SPMI_COMMON_MODE_FOLLOW_AWAKE_MASK;
+	}
+
+	if ((type == SPMI_REGULATOR_LOGICAL_TYPE_ULT_LO_SMPS
+		|| type == SPMI_REGULATOR_LOGICAL_TYPE_ULT_HO_SMPS
+		|| type == SPMI_REGULATOR_LOGICAL_TYPE_ULT_LDO)
+		&& !(data->pin_ctrl_hpm
+			& SPMI_REGULATOR_PIN_CTRL_HPM_HW_DEFAULT)) {
+		ctrl_reg[SPMI_COMMON_IDX_MODE] &=
+			~SPMI_COMMON_MODE_FOLLOW_AWAKE_MASK;
+		ctrl_reg[SPMI_COMMON_IDX_MODE] |=
+		       data->pin_ctrl_hpm & SPMI_COMMON_MODE_FOLLOW_AWAKE_MASK;
+	}
+
+	/* Write back any control register values that were modified. */
+	ret = spmi_vreg_write(vreg, SPMI_COMMON_REG_VOLTAGE_RANGE, ctrl_reg, 8);
+	if (ret)
+		return ret;
+
+	/* Set soft start strength and over current protection for VS. */
+	if (type == SPMI_REGULATOR_LOGICAL_TYPE_VS) {
+		if (data->vs_soft_start_strength
+				!= SPMI_VS_SOFT_START_STR_HW_DEFAULT) {
+			reg = data->vs_soft_start_strength
+				& SPMI_VS_SOFT_START_SEL_MASK;
+			mask = SPMI_VS_SOFT_START_SEL_MASK;
+			return spmi_vreg_update_bits(vreg,
+						     SPMI_VS_REG_SOFT_START,
+						     reg, mask);
+		}
+	}
+
+	return 0;
+}
+
+static void spmi_regulator_get_dt_config(struct spmi_regulator *vreg,
+		struct device_node *node, struct spmi_regulator_init_data *data)
+{
+	/*
+	 * Initialize configuration parameters to use hardware default in case
+	 * no value is specified via device tree.
+	 */
+	data->pin_ctrl_enable	    = SPMI_REGULATOR_PIN_CTRL_ENABLE_HW_DEFAULT;
+	data->pin_ctrl_hpm	    = SPMI_REGULATOR_PIN_CTRL_HPM_HW_DEFAULT;
+	data->vs_soft_start_strength	= SPMI_VS_SOFT_START_STR_HW_DEFAULT;
+
+	/* These bindings are optional, so it is okay if they aren't found. */
+	of_property_read_u32(node, "qcom,ocp-max-retries",
+		&vreg->ocp_max_retries);
+	of_property_read_u32(node, "qcom,ocp-retry-delay",
+		&vreg->ocp_retry_delay_ms);
+	of_property_read_u32(node, "qcom,pin-ctrl-enable",
+		&data->pin_ctrl_enable);
+	of_property_read_u32(node, "qcom,pin-ctrl-hpm", &data->pin_ctrl_hpm);
+	of_property_read_u32(node, "qcom,vs-soft-start-strength",
+		&data->vs_soft_start_strength);
+}
+
+static unsigned int spmi_regulator_of_map_mode(unsigned int mode)
+{
+	if (mode == 1)
+		return REGULATOR_MODE_NORMAL;
+	if (mode == 2)
+		return REGULATOR_MODE_FAST;
+
+	return REGULATOR_MODE_IDLE;
+}
+
+static int spmi_regulator_of_parse(struct device_node *node,
+			    const struct regulator_desc *desc,
+			    struct regulator_config *config)
+{
+	struct spmi_regulator_init_data data = { };
+	struct spmi_regulator *vreg = config->driver_data;
+	struct device *dev = config->dev;
+	int ret;
+
+	spmi_regulator_get_dt_config(vreg, node, &data);
+
+	if (!vreg->ocp_max_retries)
+		vreg->ocp_max_retries = SPMI_VS_OCP_DEFAULT_MAX_RETRIES;
+	if (!vreg->ocp_retry_delay_ms)
+		vreg->ocp_retry_delay_ms = SPMI_VS_OCP_DEFAULT_RETRY_DELAY_MS;
+
+	ret = spmi_regulator_init_registers(vreg, &data);
+	if (ret) {
+		dev_err(dev, "common initialization failed, ret=%d\n", ret);
+		return ret;
+	}
+
+	if (vreg->logical_type == SPMI_REGULATOR_LOGICAL_TYPE_FTSMPS) {
+		ret = spmi_regulator_ftsmps_init_slew_rate(vreg);
+		if (ret)
+			return ret;
+	}
+
+	if (vreg->logical_type != SPMI_REGULATOR_LOGICAL_TYPE_VS)
+		vreg->ocp_irq = 0;
+
+	if (vreg->ocp_irq) {
+		ret = devm_request_irq(dev, vreg->ocp_irq,
+			spmi_regulator_vs_ocp_isr, IRQF_TRIGGER_RISING, "ocp",
+			vreg);
+		if (ret < 0) {
+			dev_err(dev, "failed to request irq %d, ret=%d\n",
+				vreg->ocp_irq, ret);
+			return ret;
+		}
+
+		INIT_DELAYED_WORK(&vreg->ocp_work, spmi_regulator_vs_ocp_work);
+	}
+
+	return 0;
+}
+
+static const struct spmi_regulator_data pm8941_regulators[] = {
+	{ "s1", 0x1400, "vdd_s1", },
+	{ "s2", 0x1700, "vdd_s2", },
+	{ "s3", 0x1a00, "vdd_s3", },
+	{ "l1", 0x4000, "vdd_l1_l3", },
+	{ "l2", 0x4100, "vdd_l2_lvs_1_2_3", },
+	{ "l3", 0x4200, "vdd_l1_l3", },
+	{ "l4", 0x4300, "vdd_l4_l11", },
+	{ "l5", 0x4400, "vdd_l5_l7", NULL, 0x0410 },
+	{ "l6", 0x4500, "vdd_l6_l12_l14_l15", },
+	{ "l7", 0x4600, "vdd_l5_l7", NULL, 0x0410 },
+	{ "l8", 0x4700, "vdd_l8_l16_l18_19", },
+	{ "l9", 0x4800, "vdd_l9_l10_l17_l22", },
+	{ "l10", 0x4900, "vdd_l9_l10_l17_l22", },
+	{ "l11", 0x4a00, "vdd_l4_l11", },
+	{ "l12", 0x4b00, "vdd_l6_l12_l14_l15", },
+	{ "l13", 0x4c00, "vdd_l13_l20_l23_l24", },
+	{ "l14", 0x4d00, "vdd_l6_l12_l14_l15", },
+	{ "l15", 0x4e00, "vdd_l6_l12_l14_l15", },
+	{ "l16", 0x4f00, "vdd_l8_l16_l18_19", },
+	{ "l17", 0x5000, "vdd_l9_l10_l17_l22", },
+	{ "l18", 0x5100, "vdd_l8_l16_l18_19", },
+	{ "l19", 0x5200, "vdd_l8_l16_l18_19", },
+	{ "l20", 0x5300, "vdd_l13_l20_l23_l24", },
+	{ "l21", 0x5400, "vdd_l21", },
+	{ "l22", 0x5500, "vdd_l9_l10_l17_l22", },
+	{ "l23", 0x5600, "vdd_l13_l20_l23_l24", },
+	{ "l24", 0x5700, "vdd_l13_l20_l23_l24", },
+	{ "lvs1", 0x8000, "vdd_l2_lvs_1_2_3", },
+	{ "lvs2", 0x8100, "vdd_l2_lvs_1_2_3", },
+	{ "lvs3", 0x8200, "vdd_l2_lvs_1_2_3", },
+	{ "mvs1", 0x8300, "vin_5vs", },
+	{ "mvs2", 0x8400, "vin_5vs", },
+	{ }
+};
+
+static const struct spmi_regulator_data pm8841_regulators[] = {
+	{ "s1", 0x1400, "vdd_s1", },
+	{ "s2", 0x1700, "vdd_s2", NULL, 0x1c08 },
+	{ "s3", 0x1a00, "vdd_s3", },
+	{ "s4", 0x1d00, "vdd_s4", NULL, 0x1c08 },
+	{ "s5", 0x2000, "vdd_s5", NULL, 0x1c08 },
+	{ "s6", 0x2300, "vdd_s6", NULL, 0x1c08 },
+	{ "s7", 0x2600, "vdd_s7", NULL, 0x1c08 },
+	{ "s8", 0x2900, "vdd_s8", NULL, 0x1c08 },
+	{ }
+};
+
+static const struct spmi_regulator_data pm8916_regulators[] = {
+	{ "s1", 0x1400, "vdd_s1", },
+	{ "s2", 0x1700, "vdd_s2", },
+	{ "s3", 0x1a00, "vdd_s3", },
+	{ "s4", 0x1d00, "vdd_s4", },
+	{ "l1", 0x4000, "vdd_l1_l3", },
+	{ "l2", 0x4100, "vdd_l2", },
+	{ "l3", 0x4200, "vdd_l1_l3", },
+	{ "l4", 0x4300, "vdd_l4_l5_l6", },
+	{ "l5", 0x4400, "vdd_l4_l5_l6", },
+	{ "l6", 0x4500, "vdd_l4_l5_l6", },
+	{ "l7", 0x4600, "vdd_l7", },
+	{ "l8", 0x4700, "vdd_l8_l11_l14_l15_l16", },
+	{ "l9", 0x4800, "vdd_l9_l10_l12_l13_l17_l18", },
+	{ "l10", 0x4900, "vdd_l9_l10_l12_l13_l17_l18", },
+	{ "l11", 0x4a00, "vdd_l8_l11_l14_l15_l16", },
+	{ "l12", 0x4b00, "vdd_l9_l10_l12_l13_l17_l18", },
+	{ "l13", 0x4c00, "vdd_l9_l10_l12_l13_l17_l18", },
+	{ "l14", 0x4d00, "vdd_l8_l11_l14_l15_l16", },
+	{ "l15", 0x4e00, "vdd_l8_l11_l14_l15_l16", },
+	{ "l16", 0x4f00, "vdd_l8_l11_l14_l15_l16", },
+	{ "l17", 0x5000, "vdd_l9_l10_l12_l13_l17_l18", },
+	{ "l18", 0x5100, "vdd_l9_l10_l12_l13_l17_l18", },
+	{ }
+};
+
+static const struct of_device_id qcom_spmi_regulator_match[] = {
+	{ .compatible = "qcom,pm8841-regulators", .data = &pm8841_regulators },
+	{ .compatible = "qcom,pm8916-regulators", .data = &pm8916_regulators },
+	{ .compatible = "qcom,pm8941-regulators", .data = &pm8941_regulators },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, qcom_spmi_regulator_match);
+
+static int qcom_spmi_regulator_probe(struct platform_device *pdev)
+{
+	const struct spmi_regulator_data *reg;
+	const struct of_device_id *match;
+	struct regulator_config config = { };
+	struct regulator_dev *rdev;
+	struct spmi_regulator *vreg;
+	struct regmap *regmap;
+	const char *name;
+	struct device *dev = &pdev->dev;
+	int ret;
+	struct list_head *vreg_list;
+
+	vreg_list = devm_kzalloc(dev, sizeof(*vreg_list), GFP_KERNEL);
+	if (!vreg_list)
+		return -ENOMEM;
+	INIT_LIST_HEAD(vreg_list);
+	platform_set_drvdata(pdev, vreg_list);
+
+	regmap = dev_get_regmap(dev->parent, NULL);
+	if (!regmap)
+		return -ENODEV;
+
+	match = of_match_device(qcom_spmi_regulator_match, &pdev->dev);
+	if (!match)
+		return -ENODEV;
+
+	for (reg = match->data; reg->name; reg++) {
+		vreg = devm_kzalloc(dev, sizeof(*vreg), GFP_KERNEL);
+		if (!vreg)
+			return -ENOMEM;
+
+		vreg->dev = dev;
+		vreg->base = reg->base;
+		vreg->regmap = regmap;
+
+		if (reg->ocp) {
+			vreg->ocp_irq = platform_get_irq_byname(pdev, reg->ocp);
+			if (vreg->ocp_irq < 0) {
+				ret = vreg->ocp_irq;
+				goto err;
+			}
+		}
+
+		vreg->desc.id = -1;
+		vreg->desc.owner = THIS_MODULE;
+		vreg->desc.type = REGULATOR_VOLTAGE;
+		vreg->desc.name = name = reg->name;
+		vreg->desc.supply_name = reg->supply;
+		vreg->desc.of_match = reg->name;
+		vreg->desc.of_parse_cb = spmi_regulator_of_parse;
+		vreg->desc.of_map_mode = spmi_regulator_of_map_mode;
+
+		ret = spmi_regulator_match(vreg, reg->force_type);
+		if (ret)
+			goto err;
+
+		config.dev = dev;
+		config.driver_data = vreg;
+		rdev = devm_regulator_register(dev, &vreg->desc, &config);
+		if (IS_ERR(rdev)) {
+			dev_err(dev, "failed to register %s\n", name);
+			ret = PTR_ERR(rdev);
+			goto err;
+		}
+
+		INIT_LIST_HEAD(&vreg->node);
+		list_add(&vreg->node, vreg_list);
+	}
+
+	return 0;
+
+err:
+	list_for_each_entry(vreg, vreg_list, node)
+		if (vreg->ocp_irq)
+			cancel_delayed_work_sync(&vreg->ocp_work);
+	return ret;
+}
+
+static int qcom_spmi_regulator_remove(struct platform_device *pdev)
+{
+	struct spmi_regulator *vreg;
+	struct list_head *vreg_list = platform_get_drvdata(pdev);
+
+	list_for_each_entry(vreg, vreg_list, node)
+		if (vreg->ocp_irq)
+			cancel_delayed_work_sync(&vreg->ocp_work);
+
+	return 0;
+}
+
+static struct platform_driver qcom_spmi_regulator_driver = {
+	.driver		= {
+		.name	= "qcom-spmi-regulator",
+		.of_match_table = qcom_spmi_regulator_match,
+	},
+	.probe		= qcom_spmi_regulator_probe,
+	.remove		= qcom_spmi_regulator_remove,
+};
+module_platform_driver(qcom_spmi_regulator_driver);
+
+MODULE_DESCRIPTION("Qualcomm SPMI PMIC regulator driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:qcom-spmi-regulator");
diff --git a/kernel/drivers/regulator/rk808-regulator.c b/kernel/drivers/regulator/rk808-regulator.c
index 3fd44353c..d86a3dcd6 100644
--- a/kernel/drivers/regulator/rk808-regulator.c
+++ b/kernel/drivers/regulator/rk808-regulator.c
@@ -16,12 +16,16 @@
  * more details.
  */
 
-#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
 #include <linux/i2c.h>
-#include <linux/mfd/rk808.h>
+#include <linux/module.h>
 #include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/mfd/rk808.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/of_regulator.h>
+#include <linux/gpio/consumer.h>
 
 /* Field Definitions */
 #define RK808_BUCK_VSEL_MASK	0x3f
@@ -36,12 +40,25 @@
 #define RK808_RAMP_RATE_6MV_PER_US	(2 << RK808_RAMP_RATE_OFFSET)
 #define RK808_RAMP_RATE_10MV_PER_US	(3 << RK808_RAMP_RATE_OFFSET)
 
+#define RK808_DVS2_POL		BIT(2)
+#define RK808_DVS1_POL		BIT(1)
+
 /* Offset from XXX_ON_VSEL to XXX_SLP_VSEL */
 #define RK808_SLP_REG_OFFSET 1
 
+/* Offset from XXX_ON_VSEL to XXX_DVS_VSEL */
+#define RK808_DVS_REG_OFFSET 2
+
 /* Offset from XXX_EN_REG to SLEEP_SET_OFF_XXX */
 #define RK808_SLP_SET_OFF_REG_OFFSET 2
 
+/* max steps for increase voltage of Buck1/2, equal 100mv*/
+#define MAX_STEPS_ONE_TIME 8
+
+struct rk808_regulator_data {
+	struct gpio_desc *dvs_gpio[2];
+};
+
 static const int rk808_buck_config_regs[] = {
 	RK808_BUCK1_CONFIG_REG,
 	RK808_BUCK2_CONFIG_REG,
@@ -70,6 +87,131 @@ static const struct regulator_linear_range rk808_ldo6_voltage_ranges[] = {
 	REGULATOR_LINEAR_RANGE(800000, 0, 17, 100000),
 };
 
+static int rk808_buck1_2_get_voltage_sel_regmap(struct regulator_dev *rdev)
+{
+	struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev);
+	int id = rdev->desc->id - RK808_ID_DCDC1;
+	struct gpio_desc *gpio = pdata->dvs_gpio[id];
+	unsigned int val;
+	int ret;
+
+	if (!gpio || gpiod_get_value(gpio) == 0)
+		return regulator_get_voltage_sel_regmap(rdev);
+
+	ret = regmap_read(rdev->regmap,
+			  rdev->desc->vsel_reg + RK808_DVS_REG_OFFSET,
+			  &val);
+	if (ret != 0)
+		return ret;
+
+	val &= rdev->desc->vsel_mask;
+	val >>= ffs(rdev->desc->vsel_mask) - 1;
+
+	return val;
+}
+
+static int rk808_buck1_2_i2c_set_voltage_sel(struct regulator_dev *rdev,
+					     unsigned sel)
+{
+	int ret, delta_sel;
+	unsigned int old_sel, tmp, val, mask = rdev->desc->vsel_mask;
+
+	ret = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &val);
+	if (ret != 0)
+		return ret;
+
+	tmp = val & ~mask;
+	old_sel = val & mask;
+	old_sel >>= ffs(mask) - 1;
+	delta_sel = sel - old_sel;
+
+	/*
+	 * If directly modify the register to change the voltage, we will face
+	 * the risk of overshoot. Put it into a multi-step, can effectively
+	 * avoid this problem, a step is 100mv here.
+	 */
+	while (delta_sel > MAX_STEPS_ONE_TIME) {
+		old_sel += MAX_STEPS_ONE_TIME;
+		val = old_sel << (ffs(mask) - 1);
+		val |= tmp;
+
+		/*
+		 * i2c is 400kHz (2.5us per bit) and we must transmit _at least_
+		 * 3 bytes (24 bits) plus start and stop so 26 bits.  So we've
+		 * got more than 65 us between each voltage change and thus
+		 * won't ramp faster than ~1500 uV / us.
+		 */
+		ret = regmap_write(rdev->regmap, rdev->desc->vsel_reg, val);
+		delta_sel = sel - old_sel;
+	}
+
+	sel <<= ffs(mask) - 1;
+	val = tmp | sel;
+	ret = regmap_write(rdev->regmap, rdev->desc->vsel_reg, val);
+
+	/*
+	 * When we change the voltage register directly, the ramp rate is about
+	 * 100000uv/us, wait 1us to make sure the target voltage to be stable,
+	 * so we needn't wait extra time after that.
+	 */
+	udelay(1);
+
+	return ret;
+}
+
+static int rk808_buck1_2_set_voltage_sel(struct regulator_dev *rdev,
+					 unsigned sel)
+{
+	struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev);
+	int id = rdev->desc->id - RK808_ID_DCDC1;
+	struct gpio_desc *gpio = pdata->dvs_gpio[id];
+	unsigned int reg = rdev->desc->vsel_reg;
+	unsigned old_sel;
+	int ret, gpio_level;
+
+	if (!gpio)
+		return rk808_buck1_2_i2c_set_voltage_sel(rdev, sel);
+
+	gpio_level = gpiod_get_value(gpio);
+	if (gpio_level == 0) {
+		reg += RK808_DVS_REG_OFFSET;
+		ret = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &old_sel);
+	} else {
+		ret = regmap_read(rdev->regmap,
+				  reg + RK808_DVS_REG_OFFSET,
+				  &old_sel);
+	}
+
+	if (ret != 0)
+		return ret;
+
+	sel <<= ffs(rdev->desc->vsel_mask) - 1;
+	sel |= old_sel & ~rdev->desc->vsel_mask;
+
+	ret = regmap_write(rdev->regmap, reg, sel);
+	if (ret)
+		return ret;
+
+	gpiod_set_value(gpio, !gpio_level);
+
+	return ret;
+}
+
+static int rk808_buck1_2_set_voltage_time_sel(struct regulator_dev *rdev,
+				       unsigned int old_selector,
+				       unsigned int new_selector)
+{
+	struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev);
+	int id = rdev->desc->id - RK808_ID_DCDC1;
+	struct gpio_desc *gpio = pdata->dvs_gpio[id];
+
+	/* if there is no dvs1/2 pin, we don't need wait extra time here. */
+	if (!gpio)
+		return 0;
+
+	return regulator_set_voltage_time_sel(rdev, old_selector, new_selector);
+}
+
 static int rk808_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
 {
 	unsigned int ramp_value = RK808_RAMP_RATE_10MV_PER_US;
@@ -137,8 +279,9 @@ static int rk808_set_suspend_disable(struct regulator_dev *rdev)
 static struct regulator_ops rk808_buck1_2_ops = {
 	.list_voltage		= regulator_list_voltage_linear_range,
 	.map_voltage		= regulator_map_voltage_linear_range,
-	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
-	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+	.get_voltage_sel	= rk808_buck1_2_get_voltage_sel_regmap,
+	.set_voltage_sel	= rk808_buck1_2_set_voltage_sel,
+	.set_voltage_time_sel	= rk808_buck1_2_set_voltage_time_sel,
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
 	.is_enabled		= regulator_is_enabled_regmap,
@@ -380,25 +523,69 @@ static struct of_regulator_match rk808_reg_matches[] = {
 	[RK808_ID_SWITCH2]	= { .name = "SWITCH_REG2" },
 };
 
+static int rk808_regulator_dt_parse_pdata(struct device *dev,
+				   struct device *client_dev,
+				   struct regmap *map,
+				   struct rk808_regulator_data *pdata)
+{
+	struct device_node *np;
+	int tmp, ret, i;
+
+	np = of_get_child_by_name(client_dev->of_node, "regulators");
+	if (!np)
+		return -ENXIO;
+
+	ret = of_regulator_match(dev, np, rk808_reg_matches,
+				 RK808_NUM_REGULATORS);
+	if (ret < 0)
+		goto dt_parse_end;
+
+	for (i = 0; i < ARRAY_SIZE(pdata->dvs_gpio); i++) {
+		pdata->dvs_gpio[i] =
+			devm_gpiod_get_index_optional(client_dev, "dvs", i,
+						      GPIOD_OUT_LOW);
+		if (IS_ERR(pdata->dvs_gpio[i])) {
+			ret = PTR_ERR(pdata->dvs_gpio[i]);
+			dev_err(dev, "failed to get dvs%d gpio (%d)\n", i, ret);
+			goto dt_parse_end;
+		}
+
+		if (!pdata->dvs_gpio[i]) {
+			dev_warn(dev, "there is no dvs%d gpio\n", i);
+			continue;
+		}
+
+		tmp = i ? RK808_DVS2_POL : RK808_DVS1_POL;
+		ret = regmap_update_bits(map, RK808_IO_POL_REG, tmp,
+				gpiod_is_active_low(pdata->dvs_gpio[i]) ?
+				0 : tmp);
+	}
+
+dt_parse_end:
+	of_node_put(np);
+	return ret;
+}
+
 static int rk808_regulator_probe(struct platform_device *pdev)
 {
 	struct rk808 *rk808 = dev_get_drvdata(pdev->dev.parent);
 	struct i2c_client *client = rk808->i2c;
-	struct device_node *reg_np;
 	struct regulator_config config = {};
 	struct regulator_dev *rk808_rdev;
+	struct rk808_regulator_data *pdata;
 	int ret, i;
 
-	reg_np = of_get_child_by_name(client->dev.of_node, "regulators");
-	if (!reg_np)
-		return -ENXIO;
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
 
-	ret = of_regulator_match(&pdev->dev, reg_np, rk808_reg_matches,
-				 RK808_NUM_REGULATORS);
-	of_node_put(reg_np);
+	ret = rk808_regulator_dt_parse_pdata(&pdev->dev, &client->dev,
+					     rk808->regmap, pdata);
 	if (ret < 0)
 		return ret;
 
+	platform_set_drvdata(pdev, pdata);
+
 	/* Instantiate the regulators */
 	for (i = 0; i < RK808_NUM_REGULATORS; i++) {
 		if (!rk808_reg_matches[i].init_data ||
@@ -406,7 +593,7 @@ static int rk808_regulator_probe(struct platform_device *pdev)
 			continue;
 
 		config.dev = &client->dev;
-		config.driver_data = rk808;
+		config.driver_data = pdata;
 		config.regmap = rk808->regmap;
 		config.of_node = rk808_reg_matches[i].of_node;
 		config.init_data = rk808_reg_matches[i].init_data;
@@ -427,6 +614,7 @@ static struct platform_driver rk808_regulator_driver = {
 	.probe = rk808_regulator_probe,
 	.driver = {
 		.name = "rk808-regulator",
+		.owner = THIS_MODULE,
 	},
 };
 
diff --git a/kernel/drivers/regulator/s2mps11.c b/kernel/drivers/regulator/s2mps11.c
index 8de135174..72fc3c32d 100644
--- a/kernel/drivers/regulator/s2mps11.c
+++ b/kernel/drivers/regulator/s2mps11.c
@@ -517,7 +517,7 @@ static int s2mps14_regulator_enable(struct regulator_dev *rdev)
 		break;
 	default:
 		return -EINVAL;
-	};
+	}
 
 	return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
 			rdev->desc->enable_mask, val);
@@ -540,7 +540,7 @@ static int s2mps14_regulator_set_suspend_disable(struct regulator_dev *rdev)
 		default:
 			state = S2MPS14_ENABLE_SUSPEND;
 			break;
-		};
+		}
 		break;
 	case S2MPU02:
 		switch (rdev_id) {
@@ -554,11 +554,11 @@ static int s2mps14_regulator_set_suspend_disable(struct regulator_dev *rdev)
 		default:
 			state = S2MPU02_ENABLE_SUSPEND;
 			break;
-		};
+		}
 		break;
 	default:
 		return -EINVAL;
-	};
+	}
 
 	ret = regmap_read(rdev->regmap, rdev->desc->enable_reg, &val);
 	if (ret < 0)
@@ -983,7 +983,7 @@ static int s2mps11_pmic_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "Invalid device type: %u\n",
 				    s2mps11->dev_type);
 		return -EINVAL;
-	};
+	}
 
 	s2mps11->ext_control_gpio = devm_kmalloc(&pdev->dev,
 			sizeof(*s2mps11->ext_control_gpio) * s2mps11->rdev_num,
diff --git a/kernel/drivers/regulator/tps51632-regulator.c b/kernel/drivers/regulator/tps51632-regulator.c
index c213e37eb..572816e30 100644
--- a/kernel/drivers/regulator/tps51632-regulator.c
+++ b/kernel/drivers/regulator/tps51632-regulator.c
@@ -362,7 +362,6 @@ MODULE_DEVICE_TABLE(i2c, tps51632_id);
 static struct i2c_driver tps51632_i2c_driver = {
 	.driver = {
 		.name = "tps51632",
-		.owner = THIS_MODULE,
 		.of_match_table = of_match_ptr(tps51632_of_match),
 	},
 	.probe = tps51632_probe,
diff --git a/kernel/drivers/regulator/tps6105x-regulator.c b/kernel/drivers/regulator/tps6105x-regulator.c
index 3510b3e73..ddc4f10e2 100644
--- a/kernel/drivers/regulator/tps6105x-regulator.c
+++ b/kernel/drivers/regulator/tps6105x-regulator.c
@@ -14,7 +14,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/err.h>
-#include <linux/i2c.h>
+#include <linux/regmap.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
 #include <linux/mfd/core.h>
@@ -33,7 +33,7 @@ static int tps6105x_regulator_enable(struct regulator_dev *rdev)
 	int ret;
 
 	/* Activate voltage mode */
-	ret = tps6105x_mask_and_set(tps6105x, TPS6105X_REG_0,
+	ret = regmap_update_bits(tps6105x->regmap, TPS6105X_REG_0,
 		TPS6105X_REG0_MODE_MASK,
 		TPS6105X_REG0_MODE_VOLTAGE << TPS6105X_REG0_MODE_SHIFT);
 	if (ret)
@@ -48,7 +48,7 @@ static int tps6105x_regulator_disable(struct regulator_dev *rdev)
 	int ret;
 
 	/* Set into shutdown mode */
-	ret = tps6105x_mask_and_set(tps6105x, TPS6105X_REG_0,
+	ret = regmap_update_bits(tps6105x->regmap, TPS6105X_REG_0,
 		TPS6105X_REG0_MODE_MASK,
 		TPS6105X_REG0_MODE_SHUTDOWN << TPS6105X_REG0_MODE_SHIFT);
 	if (ret)
@@ -60,10 +60,10 @@ static int tps6105x_regulator_disable(struct regulator_dev *rdev)
 static int tps6105x_regulator_is_enabled(struct regulator_dev *rdev)
 {
 	struct tps6105x *tps6105x = rdev_get_drvdata(rdev);
-	u8 regval;
+	unsigned int regval;
 	int ret;
 
-	ret = tps6105x_get(tps6105x, TPS6105X_REG_0, &regval);
+	ret = regmap_read(tps6105x->regmap, TPS6105X_REG_0, &regval);
 	if (ret)
 		return ret;
 	regval &= TPS6105X_REG0_MODE_MASK;
@@ -78,10 +78,10 @@ static int tps6105x_regulator_is_enabled(struct regulator_dev *rdev)
 static int tps6105x_regulator_get_voltage_sel(struct regulator_dev *rdev)
 {
 	struct tps6105x *tps6105x = rdev_get_drvdata(rdev);
-	u8 regval;
+	unsigned int regval;
 	int ret;
 
-	ret = tps6105x_get(tps6105x, TPS6105X_REG_0, &regval);
+	ret = regmap_read(tps6105x->regmap, TPS6105X_REG_0, &regval);
 	if (ret)
 		return ret;
 
@@ -96,7 +96,7 @@ static int tps6105x_regulator_set_voltage_sel(struct regulator_dev *rdev,
 	struct tps6105x *tps6105x = rdev_get_drvdata(rdev);
 	int ret;
 
-	ret = tps6105x_mask_and_set(tps6105x, TPS6105X_REG_0,
+	ret = regmap_update_bits(tps6105x->regmap, TPS6105X_REG_0,
 				    TPS6105X_REG0_VOLTAGE_MASK,
 				    selector << TPS6105X_REG0_VOLTAGE_SHIFT);
 	if (ret)
diff --git a/kernel/drivers/regulator/tps62360-regulator.c b/kernel/drivers/regulator/tps62360-regulator.c
index a1fd626c6..f6a6d36a6 100644
--- a/kernel/drivers/regulator/tps62360-regulator.c
+++ b/kernel/drivers/regulator/tps62360-regulator.c
@@ -515,7 +515,6 @@ MODULE_DEVICE_TABLE(i2c, tps62360_id);
 static struct i2c_driver tps62360_i2c_driver = {
 	.driver = {
 		.name = "tps62360",
-		.owner = THIS_MODULE,
 		.of_match_table = of_match_ptr(tps62360_of_match),
 	},
 	.probe = tps62360_probe,
diff --git a/kernel/drivers/regulator/tps65023-regulator.c b/kernel/drivers/regulator/tps65023-regulator.c
index b941e564b..d2c3d7cc3 100644
--- a/kernel/drivers/regulator/tps65023-regulator.c
+++ b/kernel/drivers/regulator/tps65023-regulator.c
@@ -86,6 +86,42 @@
 
 #define TPS65023_MAX_REG_ID		TPS65023_LDO_2
 
+#define TPS65023_REGULATOR_DCDC(_num, _t, _em)			\
+	{							\
+		.name		= "VDCDC"#_num,			\
+		.of_match	= of_match_ptr("VDCDC"#_num),	\
+		.regulators_node = of_match_ptr("regulators"),	\
+		.id		= TPS65023_DCDC_##_num,		\
+		.n_voltages     = ARRAY_SIZE(_t),		\
+		.ops		= &tps65023_dcdc_ops,		\
+		.type		= REGULATOR_VOLTAGE,		\
+		.owner		= THIS_MODULE,			\
+		.volt_table	= _t,				\
+		.vsel_reg	= TPS65023_REG_DEF_CORE,	\
+		.vsel_mask	= ARRAY_SIZE(_t) - 1,		\
+		.enable_mask	= _em,				\
+		.enable_reg	= TPS65023_REG_REG_CTRL,	\
+		.apply_reg	= TPS65023_REG_CON_CTRL2,	\
+		.apply_bit	= TPS65023_REG_CTRL2_GO,	\
+	}							\
+
+#define TPS65023_REGULATOR_LDO(_num, _t, _vm)			\
+	{							\
+		.name		= "LDO"#_num,			\
+		.of_match	= of_match_ptr("LDO"#_num),	\
+		.regulators_node = of_match_ptr("regulators"),	\
+		.id		= TPS65023_LDO_##_num,		\
+		.n_voltages     = ARRAY_SIZE(_t),		\
+		.ops		= &tps65023_ldo_ops,		\
+		.type		= REGULATOR_VOLTAGE,		\
+		.owner		= THIS_MODULE,			\
+		.volt_table	= _t,				\
+		.vsel_reg	= TPS65023_REG_LDO_CTRL,	\
+		.vsel_mask	= _vm,				\
+		.enable_mask	= 1 << (_num),			\
+		.enable_reg	= TPS65023_REG_REG_CTRL,	\
+	}							\
+
 /* Supported voltage values for regulators */
 static const unsigned int VCORE_VSEL_table[] = {
 	800000, 825000, 850000, 875000,
@@ -124,25 +160,16 @@ static const unsigned int TPS65023_LDO2_VSEL_table[] = {
 	2500000, 2800000, 3000000, 3300000,
 };
 
-/* Regulator specific details */
-struct tps_info {
-	const char *name;
-	u8 table_len;
-	const unsigned int *table;
-};
-
 /* PMIC details */
 struct tps_pmic {
-	struct regulator_desc desc[TPS65023_NUM_REGULATOR];
 	struct regulator_dev *rdev[TPS65023_NUM_REGULATOR];
-	const struct tps_info *info[TPS65023_NUM_REGULATOR];
+	const struct tps_driver_data *driver_data;
 	struct regmap *regmap;
-	u8 core_regulator;
 };
 
 /* Struct passed as driver data */
 struct tps_driver_data {
-	const struct tps_info *info;
+	const struct regulator_desc *desc;
 	u8 core_regulator;
 };
 
@@ -154,7 +181,7 @@ static int tps65023_dcdc_get_voltage_sel(struct regulator_dev *dev)
 	if (dcdc < TPS65023_DCDC_1 || dcdc > TPS65023_DCDC_3)
 		return -EINVAL;
 
-	if (dcdc != tps->core_regulator)
+	if (dcdc != tps->driver_data->core_regulator)
 		return 0;
 
 	return regulator_get_voltage_sel_regmap(dev);
@@ -166,7 +193,7 @@ static int tps65023_dcdc_set_voltage_sel(struct regulator_dev *dev,
 	struct tps_pmic *tps = rdev_get_drvdata(dev);
 	int dcdc = rdev_get_id(dev);
 
-	if (dcdc != tps->core_regulator)
+	if (dcdc != tps->driver_data->core_regulator)
 		return -EINVAL;
 
 	return regulator_set_voltage_sel_regmap(dev, selector);
@@ -199,30 +226,60 @@ static const struct regmap_config tps65023_regmap_config = {
 	.val_bits = 8,
 };
 
+static const struct regulator_desc tps65020_regulators[] = {
+	TPS65023_REGULATOR_DCDC(1, DCDC_FIXED_3300000_VSEL_table, 0x20),
+	TPS65023_REGULATOR_DCDC(2, DCDC_FIXED_1800000_VSEL_table, 0x10),
+	TPS65023_REGULATOR_DCDC(3, VCORE_VSEL_table, 0x08),
+	TPS65023_REGULATOR_LDO(1, TPS65020_LDO_VSEL_table, 0x07),
+	TPS65023_REGULATOR_LDO(2, TPS65020_LDO_VSEL_table, 0x70),
+};
+
+static const struct regulator_desc tps65021_regulators[] = {
+	TPS65023_REGULATOR_DCDC(1, DCDC_FIXED_3300000_VSEL_table, 0x20),
+	TPS65023_REGULATOR_DCDC(2, DCDC_FIXED_1800000_VSEL_table, 0x10),
+	TPS65023_REGULATOR_DCDC(3, VCORE_VSEL_table, 0x08),
+	TPS65023_REGULATOR_LDO(1, TPS65023_LDO1_VSEL_table, 0x07),
+	TPS65023_REGULATOR_LDO(2, TPS65023_LDO2_VSEL_table, 0x70),
+};
+
+static const struct regulator_desc tps65023_regulators[] = {
+	TPS65023_REGULATOR_DCDC(1, VCORE_VSEL_table, 0x20),
+	TPS65023_REGULATOR_DCDC(2, DCDC_FIXED_3300000_VSEL_table, 0x10),
+	TPS65023_REGULATOR_DCDC(3, DCDC_FIXED_1800000_VSEL_table, 0x08),
+	TPS65023_REGULATOR_LDO(1, TPS65023_LDO1_VSEL_table, 0x07),
+	TPS65023_REGULATOR_LDO(2, TPS65023_LDO2_VSEL_table, 0x70),
+};
+
+static struct tps_driver_data tps65020_drv_data = {
+	.desc = tps65020_regulators,
+	.core_regulator = TPS65023_DCDC_3,
+};
+
+static struct tps_driver_data tps65021_drv_data = {
+	.desc = tps65021_regulators,
+	.core_regulator = TPS65023_DCDC_3,
+};
+
+static struct tps_driver_data tps65023_drv_data = {
+	.desc = tps65023_regulators,
+	.core_regulator = TPS65023_DCDC_1,
+};
+
 static int tps_65023_probe(struct i2c_client *client,
 				     const struct i2c_device_id *id)
 {
-	const struct tps_driver_data *drv_data = (void *)id->driver_data;
-	const struct tps_info *info = drv_data->info;
+	struct regulator_init_data *init_data = dev_get_platdata(&client->dev);
 	struct regulator_config config = { };
-	struct regulator_init_data *init_data;
-	struct regulator_dev *rdev;
 	struct tps_pmic *tps;
 	int i;
 	int error;
 
-	/**
-	 * init_data points to array of regulator_init structures
-	 * coming from the board-evm file.
-	 */
-	init_data = dev_get_platdata(&client->dev);
-	if (!init_data)
-		return -EIO;
-
 	tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL);
 	if (!tps)
 		return -ENOMEM;
 
+	tps->driver_data = (struct tps_driver_data *)id->driver_data;
+
 	tps->regmap = devm_regmap_init_i2c(client, &tps65023_regmap_config);
 	if (IS_ERR(tps->regmap)) {
 		error = PTR_ERR(tps->regmap);
@@ -232,58 +289,22 @@ static int tps_65023_probe(struct i2c_client *client,
 	}
 
 	/* common for all regulators */
-	tps->core_regulator = drv_data->core_regulator;
-
-	for (i = 0; i < TPS65023_NUM_REGULATOR; i++, info++, init_data++) {
-		/* Store regulator specific information */
-		tps->info[i] = info;
-
-		tps->desc[i].name = info->name;
-		tps->desc[i].id = i;
-		tps->desc[i].n_voltages = info->table_len;
-		tps->desc[i].volt_table = info->table;
-		tps->desc[i].ops = (i > TPS65023_DCDC_3 ?
-					&tps65023_ldo_ops : &tps65023_dcdc_ops);
-		tps->desc[i].type = REGULATOR_VOLTAGE;
-		tps->desc[i].owner = THIS_MODULE;
-
-		tps->desc[i].enable_reg = TPS65023_REG_REG_CTRL;
-		switch (i) {
-		case TPS65023_LDO_1:
-			tps->desc[i].vsel_reg = TPS65023_REG_LDO_CTRL;
-			tps->desc[i].vsel_mask = 0x07;
-			tps->desc[i].enable_mask = 1 << 1;
-			break;
-		case TPS65023_LDO_2:
-			tps->desc[i].vsel_reg = TPS65023_REG_LDO_CTRL;
-			tps->desc[i].vsel_mask = 0x70;
-			tps->desc[i].enable_mask = 1 << 2;
-			break;
-		default: /* DCDCx */
-			tps->desc[i].enable_mask =
-					1 << (TPS65023_NUM_REGULATOR - i);
-			tps->desc[i].vsel_reg = TPS65023_REG_DEF_CORE;
-			tps->desc[i].vsel_mask = info->table_len - 1;
-			tps->desc[i].apply_reg = TPS65023_REG_CON_CTRL2;
-			tps->desc[i].apply_bit = TPS65023_REG_CTRL2_GO;
-		}
+	config.dev = &client->dev;
+	config.driver_data = tps;
+	config.regmap = tps->regmap;
 
-		config.dev = &client->dev;
-		config.init_data = init_data;
-		config.driver_data = tps;
-		config.regmap = tps->regmap;
+	for (i = 0; i < TPS65023_NUM_REGULATOR; i++) {
+		if (init_data)
+			config.init_data = &init_data[i];
 
 		/* Register the regulators */
-		rdev = devm_regulator_register(&client->dev, &tps->desc[i],
-					       &config);
-		if (IS_ERR(rdev)) {
+		tps->rdev[i] = devm_regulator_register(&client->dev,
+					&tps->driver_data->desc[i], &config);
+		if (IS_ERR(tps->rdev[i])) {
 			dev_err(&client->dev, "failed to register %s\n",
 				id->name);
-			return PTR_ERR(rdev);
+			return PTR_ERR(tps->rdev[i]);
 		}
-
-		/* Save regulator for cleanup */
-		tps->rdev[i] = rdev;
 	}
 
 	i2c_set_clientdata(client, tps);
@@ -296,121 +317,33 @@ static int tps_65023_probe(struct i2c_client *client,
 	return 0;
 }
 
-static const struct tps_info tps65020_regs[] = {
-	{
-		.name = "VDCDC1",
-		.table_len = ARRAY_SIZE(DCDC_FIXED_3300000_VSEL_table),
-		.table = DCDC_FIXED_3300000_VSEL_table,
-	},
-	{
-		.name = "VDCDC2",
-		.table_len = ARRAY_SIZE(DCDC_FIXED_1800000_VSEL_table),
-		.table = DCDC_FIXED_1800000_VSEL_table,
-	},
-	{
-		.name = "VDCDC3",
-		.table_len = ARRAY_SIZE(VCORE_VSEL_table),
-		.table = VCORE_VSEL_table,
-	},
-	{
-		.name = "LDO1",
-		.table_len = ARRAY_SIZE(TPS65020_LDO_VSEL_table),
-		.table = TPS65020_LDO_VSEL_table,
-	},
-	{
-		.name = "LDO2",
-		.table_len = ARRAY_SIZE(TPS65020_LDO_VSEL_table),
-		.table = TPS65020_LDO_VSEL_table,
-	},
-};
-
-static const struct tps_info tps65021_regs[] = {
-	{
-		.name = "VDCDC1",
-		.table_len = ARRAY_SIZE(DCDC_FIXED_3300000_VSEL_table),
-		.table = DCDC_FIXED_3300000_VSEL_table,
-	},
-	{
-		.name = "VDCDC2",
-		.table_len = ARRAY_SIZE(DCDC_FIXED_1800000_VSEL_table),
-		.table = DCDC_FIXED_1800000_VSEL_table,
-	},
-	{
-		.name = "VDCDC3",
-		.table_len = ARRAY_SIZE(VCORE_VSEL_table),
-		.table = VCORE_VSEL_table,
-	},
-	{
-		.name = "LDO1",
-		.table_len = ARRAY_SIZE(TPS65023_LDO1_VSEL_table),
-		.table = TPS65023_LDO1_VSEL_table,
-	},
-	{
-		.name = "LDO2",
-		.table_len = ARRAY_SIZE(TPS65023_LDO2_VSEL_table),
-		.table = TPS65023_LDO2_VSEL_table,
-	},
+static const struct of_device_id tps65023_of_match[] = {
+	{ .compatible = "ti,tps65020", .data = &tps65020_drv_data},
+	{ .compatible = "ti,tps65021", .data = &tps65021_drv_data},
+	{ .compatible = "ti,tps65023", .data = &tps65023_drv_data},
+	{},
 };
+MODULE_DEVICE_TABLE(of, tps65023_of_match);
 
-static const struct tps_info tps65023_regs[] = {
-	{
-		.name = "VDCDC1",
-		.table_len = ARRAY_SIZE(VCORE_VSEL_table),
-		.table = VCORE_VSEL_table,
-	},
-	{
-		.name = "VDCDC2",
-		.table_len = ARRAY_SIZE(DCDC_FIXED_3300000_VSEL_table),
-		.table = DCDC_FIXED_3300000_VSEL_table,
-	},
-	{
-		.name = "VDCDC3",
-		.table_len = ARRAY_SIZE(DCDC_FIXED_1800000_VSEL_table),
-		.table = DCDC_FIXED_1800000_VSEL_table,
-	},
-	{
-		.name = "LDO1",
-		.table_len = ARRAY_SIZE(TPS65023_LDO1_VSEL_table),
-		.table = TPS65023_LDO1_VSEL_table,
-	},
+static const struct i2c_device_id tps_65023_id[] = {
 	{
-		.name = "LDO2",
-		.table_len = ARRAY_SIZE(TPS65023_LDO2_VSEL_table),
-		.table = TPS65023_LDO2_VSEL_table,
+		.name = "tps65023",
+		.driver_data = (kernel_ulong_t)&tps65023_drv_data
+	}, {
+		.name = "tps65021",
+		.driver_data = (kernel_ulong_t)&tps65021_drv_data
+	}, {
+		.name = "tps65020",
+		.driver_data = (kernel_ulong_t)&tps65020_drv_data
 	},
-};
-
-static struct tps_driver_data tps65020_drv_data = {
-	.info = tps65020_regs,
-	.core_regulator = TPS65023_DCDC_3,
-};
-
-static struct tps_driver_data tps65021_drv_data = {
-	.info = tps65021_regs,
-	.core_regulator = TPS65023_DCDC_3,
-};
-
-static struct tps_driver_data tps65023_drv_data = {
-	.info = tps65023_regs,
-	.core_regulator = TPS65023_DCDC_1,
-};
-
-static const struct i2c_device_id tps_65023_id[] = {
-	{.name = "tps65023",
-	.driver_data = (unsigned long) &tps65023_drv_data},
-	{.name = "tps65021",
-	.driver_data = (unsigned long) &tps65021_drv_data,},
-	{.name = "tps65020",
-	.driver_data = (unsigned long) &tps65020_drv_data},
 	{ },
 };
-
 MODULE_DEVICE_TABLE(i2c, tps_65023_id);
 
 static struct i2c_driver tps_65023_i2c_driver = {
 	.driver = {
 		.name = "tps65023",
-		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(tps65023_of_match),
 	},
 	.probe = tps_65023_probe,
 	.id_table = tps_65023_id,
diff --git a/kernel/drivers/regulator/tps65218-regulator.c b/kernel/drivers/regulator/tps65218-regulator.c
index 7f97223f9..a02c1b961 100644
--- a/kernel/drivers/regulator/tps65218-regulator.c
+++ b/kernel/drivers/regulator/tps65218-regulator.c
@@ -73,7 +73,7 @@ static const struct regulator_linear_range dcdc4_ranges[] = {
 };
 
 static struct tps_info tps65218_pmic_regs[] = {
-	TPS65218_INFO(DCDC1, "DCDC1", 850000, 167500),
+	TPS65218_INFO(DCDC1, "DCDC1", 850000, 1675000),
 	TPS65218_INFO(DCDC2, "DCDC2", 850000, 1675000),
 	TPS65218_INFO(DCDC3, "DCDC3", 900000, 3400000),
 	TPS65218_INFO(DCDC4, "DCDC4", 1175000, 3400000),
diff --git a/kernel/drivers/regulator/tps6524x-regulator.c b/kernel/drivers/regulator/tps6524x-regulator.c
index 5b494db9f..9d6ea3a4d 100644
--- a/kernel/drivers/regulator/tps6524x-regulator.c
+++ b/kernel/drivers/regulator/tps6524x-regulator.c
@@ -629,7 +629,6 @@ static struct spi_driver pmic_driver = {
 	.probe		= pmic_probe,
 	.driver		= {
 		.name	= "tps6524x",
-		.owner	= THIS_MODULE,
 	},
 };
 
diff --git a/kernel/drivers/regulator/tps6586x-regulator.c b/kernel/drivers/regulator/tps6586x-regulator.c
index 2852de05d..9e9d22038 100644
--- a/kernel/drivers/regulator/tps6586x-regulator.c
+++ b/kernel/drivers/regulator/tps6586x-regulator.c
@@ -422,12 +422,12 @@ static struct tps6586x_platform_data *tps6586x_parse_regulator_dt(
 		return NULL;
 
 	for (i = 0; i < num; i++) {
-		int id;
+		uintptr_t id;
 		if (!tps6586x_matches[i].init_data)
 			continue;
 
 		pdata->reg_init_data[i] = tps6586x_matches[i].init_data;
-		id = (int)tps6586x_matches[i].driver_data;
+		id = (uintptr_t)tps6586x_matches[i].driver_data;
 		if (id == TPS6586X_ID_SYS)
 			sys_rail = pdata->reg_init_data[i]->constraints.name;
 
diff --git a/kernel/drivers/regulator/vexpress.c b/kernel/drivers/regulator/vexpress.c
index bed9d3ee4..c810cbbd4 100644
--- a/kernel/drivers/regulator/vexpress.c
+++ b/kernel/drivers/regulator/vexpress.c
@@ -103,6 +103,7 @@ static const struct of_device_id vexpress_regulator_of_match[] = {
 	{ .compatible = "arm,vexpress-volt", },
 	{ }
 };
+MODULE_DEVICE_TABLE(of, vexpress_regulator_of_match);
 
 static struct platform_driver vexpress_regulator_driver = {
 	.probe = vexpress_regulator_probe,
diff --git a/kernel/drivers/regulator/wm831x-dcdc.c b/kernel/drivers/regulator/wm831x-dcdc.c
index 0d7e164a5..8cbb82cee 100644
--- a/kernel/drivers/regulator/wm831x-dcdc.c
+++ b/kernel/drivers/regulator/wm831x-dcdc.c
@@ -533,7 +533,8 @@ static int wm831x_buckv_probe(struct platform_device *pdev)
 	irq = wm831x_irq(wm831x, platform_get_irq_byname(pdev, "UV"));
 	ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
 					wm831x_dcdc_uv_irq,
-					IRQF_TRIGGER_RISING, dcdc->name, dcdc);
+					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					dcdc->name, dcdc);
 	if (ret != 0) {
 		dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n",
 			irq, ret);
@@ -543,7 +544,8 @@ static int wm831x_buckv_probe(struct platform_device *pdev)
 	irq = wm831x_irq(wm831x, platform_get_irq_byname(pdev, "HC"));
 	ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
 					wm831x_dcdc_oc_irq,
-					IRQF_TRIGGER_RISING, dcdc->name, dcdc);
+					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					dcdc->name, dcdc);
 	if (ret != 0) {
 		dev_err(&pdev->dev, "Failed to request HC IRQ %d: %d\n",
 			irq, ret);
@@ -669,7 +671,8 @@ static int wm831x_buckp_probe(struct platform_device *pdev)
 	irq = wm831x_irq(wm831x, platform_get_irq_byname(pdev, "UV"));
 	ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
 					wm831x_dcdc_uv_irq,
-					IRQF_TRIGGER_RISING, dcdc->name, dcdc);
+					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					dcdc->name, dcdc);
 	if (ret != 0) {
 		dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n",
 			irq, ret);
@@ -785,7 +788,8 @@ static int wm831x_boostp_probe(struct platform_device *pdev)
 	irq = wm831x_irq(wm831x, platform_get_irq_byname(pdev, "UV"));
 	ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
 					wm831x_dcdc_uv_irq,
-					IRQF_TRIGGER_RISING, dcdc->name,
+					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					dcdc->name,
 					dcdc);
 	if (ret != 0) {
 		dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n",
diff --git a/kernel/drivers/regulator/wm831x-isink.c b/kernel/drivers/regulator/wm831x-isink.c
index 1e88391a1..1442828fc 100644
--- a/kernel/drivers/regulator/wm831x-isink.c
+++ b/kernel/drivers/regulator/wm831x-isink.c
@@ -204,7 +204,8 @@ static int wm831x_isink_probe(struct platform_device *pdev)
 	irq = wm831x_irq(wm831x, platform_get_irq(pdev, 0));
 	ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
 					wm831x_isink_irq,
-					IRQF_TRIGGER_RISING, isink->name,
+					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					isink->name,
 					isink);
 	if (ret != 0) {
 		dev_err(&pdev->dev, "Failed to request ISINK IRQ %d: %d\n",
diff --git a/kernel/drivers/regulator/wm831x-ldo.c b/kernel/drivers/regulator/wm831x-ldo.c
index 7ae2dc82f..5a7b65e8a 100644
--- a/kernel/drivers/regulator/wm831x-ldo.c
+++ b/kernel/drivers/regulator/wm831x-ldo.c
@@ -287,7 +287,8 @@ static int wm831x_gp_ldo_probe(struct platform_device *pdev)
 	irq = wm831x_irq(wm831x, platform_get_irq_byname(pdev, "UV"));
 	ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
 					wm831x_ldo_uv_irq,
-					IRQF_TRIGGER_RISING, ldo->name,
+					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					ldo->name,
 					ldo);
 	if (ret != 0) {
 		dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n",
@@ -496,7 +497,8 @@ static int wm831x_aldo_probe(struct platform_device *pdev)
 	irq = wm831x_irq(wm831x, platform_get_irq_byname(pdev, "UV"));
 	ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
 					wm831x_ldo_uv_irq,
-					IRQF_TRIGGER_RISING, ldo->name, ldo);
+					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					ldo->name, ldo);
 	if (ret != 0) {
 		dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n",
 			irq, ret);