Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

19 files changed, 9726 insertions, 0 deletions

diff --git a/kernel/drivers/rapidio/Kconfig b/kernel/drivers/rapidio/Kconfig
new file mode 100644
index 000000000..3e3be57e9
--- /dev/null
+++ b/kernel/drivers/rapidio/Kconfig
@@ -0,0 +1,75 @@
+#
+# RapidIO configuration
+#
+source "drivers/rapidio/devices/Kconfig"
+
+config RAPIDIO_DISC_TIMEOUT
+	int "Discovery timeout duration (seconds)"
+	depends on RAPIDIO
+	default "30"
+	---help---
+	  Amount of time a discovery node waits for a host to complete
+	  enumeration before giving up.
+
+config RAPIDIO_ENABLE_RX_TX_PORTS
+	bool "Enable RapidIO Input/Output Ports"
+	depends on RAPIDIO
+	---help---
+	  The RapidIO specification describes a Output port transmit
+	  enable and a Input port receive enable. The recommended state
+	  for Input ports and Output ports should be disabled. When
+	  this switch is set the RapidIO subsystem will enable all
+	  ports for Input/Output direction to allow other traffic
+	  than Maintenance transfers.
+
+config RAPIDIO_DMA_ENGINE
+	bool "DMA Engine support for RapidIO"
+	depends on RAPIDIO
+	select DMADEVICES
+	select DMA_ENGINE
+	help
+	  Say Y here if you want to use DMA Engine frameork for RapidIO data
+	  transfers to/from target RIO devices. RapidIO uses NREAD and
+	  NWRITE (NWRITE_R, SWRITE) requests to transfer data between local
+	  memory and memory on remote target device. You need a DMA controller
+	  capable to perform data transfers to/from RapidIO.
+
+	  If you are unsure about this, say Y here.
+
+config RAPIDIO_DEBUG
+	bool "RapidIO subsystem debug messages"
+	depends on RAPIDIO
+	help
+	  Say Y here if you want the RapidIO subsystem to produce a bunch of
+	  debug messages to the system log. Select this if you are having a
+	  problem with the RapidIO subsystem and want to see more of what is
+	  going on.
+
+	  If you are unsure about this, say N here.
+
+choice
+	prompt "Enumeration method"
+	depends on RAPIDIO
+	default RAPIDIO_ENUM_BASIC
+	help
+	  There are different enumeration and discovery mechanisms offered
+	  for RapidIO subsystem. You may select single built-in method or
+	  or any number of methods to be built as modules.
+	  Selecting a built-in method disables use of loadable methods.
+
+	  If unsure, select Basic built-in.
+
+config RAPIDIO_ENUM_BASIC
+	tristate "Basic"
+	help
+	  This option includes basic RapidIO fabric enumeration and discovery
+	  mechanism similar to one described in RapidIO specification Annex 1.
+
+endchoice
+
+menu "RapidIO Switch drivers"
+	depends on RAPIDIO
+
+source "drivers/rapidio/switches/Kconfig"
+
+endmenu
diff --git a/kernel/drivers/rapidio/Makefile b/kernel/drivers/rapidio/Makefile
new file mode 100644
index 000000000..6271ada69
--- /dev/null
+++ b/kernel/drivers/rapidio/Makefile
@@ -0,0 +1,12 @@
+#
+# Makefile for RapidIO interconnect services
+#
+obj-$(CONFIG_RAPIDIO) += rapidio.o
+rapidio-y := rio.o rio-access.o rio-driver.o rio-sysfs.o
+
+obj-$(CONFIG_RAPIDIO_ENUM_BASIC) += rio-scan.o
+
+obj-$(CONFIG_RAPIDIO)		+= switches/
+obj-$(CONFIG_RAPIDIO)		+= devices/
+
+subdir-ccflags-$(CONFIG_RAPIDIO_DEBUG) := -DDEBUG
diff --git a/kernel/drivers/rapidio/devices/Kconfig b/kernel/drivers/rapidio/devices/Kconfig
new file mode 100644
index 000000000..c4cb08775
--- /dev/null
+++ b/kernel/drivers/rapidio/devices/Kconfig
@@ -0,0 +1,10 @@
+#
+# RapidIO master port configuration
+#
+
+config RAPIDIO_TSI721
+	tristate "IDT Tsi721 PCI Express SRIO Controller support"
+	depends on RAPIDIO && PCIEPORTBUS
+	default "n"
+	---help---
+	  Include support for IDT Tsi721 PCI Express Serial RapidIO controller.
diff --git a/kernel/drivers/rapidio/devices/Makefile b/kernel/drivers/rapidio/devices/Makefile
new file mode 100644
index 000000000..9432c494c
--- /dev/null
+++ b/kernel/drivers/rapidio/devices/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for RapidIO devices
+#
+
+obj-$(CONFIG_RAPIDIO_TSI721)	+= tsi721_mport.o
+tsi721_mport-y			:= tsi721.o
+tsi721_mport-$(CONFIG_RAPIDIO_DMA_ENGINE) += tsi721_dma.o
diff --git a/kernel/drivers/rapidio/devices/tsi721.c b/kernel/drivers/rapidio/devices/tsi721.c
new file mode 100644
index 000000000..eeca70ddb
--- /dev/null
+++ b/kernel/drivers/rapidio/devices/tsi721.c
@@ -0,0 +1,2518 @@
+/*
+ * RapidIO mport driver for Tsi721 PCIExpress-to-SRIO bridge
+ *
+ * Copyright 2011 Integrated Device Technology, Inc.
+ * Alexandre Bounine <alexandre.bounine@idt.com>
+ * Chul Kim <chul.kim@idt.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#include <linux/io.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/rio.h>
+#include <linux/rio_drv.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/kfifo.h>
+#include <linux/delay.h>
+
+#include "tsi721.h"
+
+#define DEBUG_PW	/* Inbound Port-Write debugging */
+
+static void tsi721_omsg_handler(struct tsi721_device *priv, int ch);
+static void tsi721_imsg_handler(struct tsi721_device *priv, int ch);
+
+/**
+ * tsi721_lcread - read from local SREP config space
+ * @mport: RapidIO master port info
+ * @index: ID of RapdiIO interface
+ * @offset: Offset into configuration space
+ * @len: Length (in bytes) of the maintenance transaction
+ * @data: Value to be read into
+ *
+ * Generates a local SREP space read. Returns %0 on
+ * success or %-EINVAL on failure.
+ */
+static int tsi721_lcread(struct rio_mport *mport, int index, u32 offset,
+			 int len, u32 *data)
+{
+	struct tsi721_device *priv = mport->priv;
+
+	if (len != sizeof(u32))
+		return -EINVAL; /* only 32-bit access is supported */
+
+	*data = ioread32(priv->regs + offset);
+
+	return 0;
+}
+
+/**
+ * tsi721_lcwrite - write into local SREP config space
+ * @mport: RapidIO master port info
+ * @index: ID of RapdiIO interface
+ * @offset: Offset into configuration space
+ * @len: Length (in bytes) of the maintenance transaction
+ * @data: Value to be written
+ *
+ * Generates a local write into SREP configuration space. Returns %0 on
+ * success or %-EINVAL on failure.
+ */
+static int tsi721_lcwrite(struct rio_mport *mport, int index, u32 offset,
+			  int len, u32 data)
+{
+	struct tsi721_device *priv = mport->priv;
+
+	if (len != sizeof(u32))
+		return -EINVAL; /* only 32-bit access is supported */
+
+	iowrite32(data, priv->regs + offset);
+
+	return 0;
+}
+
+/**
+ * tsi721_maint_dma - Helper function to generate RapidIO maintenance
+ *                    transactions using designated Tsi721 DMA channel.
+ * @priv: pointer to tsi721 private data
+ * @sys_size: RapdiIO transport system size
+ * @destid: Destination ID of transaction
+ * @hopcount: Number of hops to target device
+ * @offset: Offset into configuration space
+ * @len: Length (in bytes) of the maintenance transaction
+ * @data: Location to be read from or write into
+ * @do_wr: Operation flag (1 == MAINT_WR)
+ *
+ * Generates a RapidIO maintenance transaction (Read or Write).
+ * Returns %0 on success and %-EINVAL or %-EFAULT on failure.
+ */
+static int tsi721_maint_dma(struct tsi721_device *priv, u32 sys_size,
+			u16 destid, u8 hopcount, u32 offset, int len,
+			u32 *data, int do_wr)
+{
+	void __iomem *regs = priv->regs + TSI721_DMAC_BASE(priv->mdma.ch_id);
+	struct tsi721_dma_desc *bd_ptr;
+	u32 rd_count, swr_ptr, ch_stat;
+	int i, err = 0;
+	u32 op = do_wr ? MAINT_WR : MAINT_RD;
+
+	if (offset > (RIO_MAINT_SPACE_SZ - len) || (len != sizeof(u32)))
+		return -EINVAL;
+
+	bd_ptr = priv->mdma.bd_base;
+
+	rd_count = ioread32(regs + TSI721_DMAC_DRDCNT);
+
+	/* Initialize DMA descriptor */
+	bd_ptr[0].type_id = cpu_to_le32((DTYPE2 << 29) | (op << 19) | destid);
+	bd_ptr[0].bcount = cpu_to_le32((sys_size << 26) | 0x04);
+	bd_ptr[0].raddr_lo = cpu_to_le32((hopcount << 24) | offset);
+	bd_ptr[0].raddr_hi = 0;
+	if (do_wr)
+		bd_ptr[0].data[0] = cpu_to_be32p(data);
+	else
+		bd_ptr[0].data[0] = 0xffffffff;
+
+	mb();
+
+	/* Start DMA operation */
+	iowrite32(rd_count + 2,	regs + TSI721_DMAC_DWRCNT);
+	ioread32(regs + TSI721_DMAC_DWRCNT);
+	i = 0;
+
+	/* Wait until DMA transfer is finished */
+	while ((ch_stat = ioread32(regs + TSI721_DMAC_STS))
+							& TSI721_DMAC_STS_RUN) {
+		udelay(1);
+		if (++i >= 5000000) {
+			dev_dbg(&priv->pdev->dev,
+				"%s : DMA[%d] read timeout ch_status=%x\n",
+				__func__, priv->mdma.ch_id, ch_stat);
+			if (!do_wr)
+				*data = 0xffffffff;
+			err = -EIO;
+			goto err_out;
+		}
+	}
+
+	if (ch_stat & TSI721_DMAC_STS_ABORT) {
+		/* If DMA operation aborted due to error,
+		 * reinitialize DMA channel
+		 */
+		dev_dbg(&priv->pdev->dev, "%s : DMA ABORT ch_stat=%x\n",
+			__func__, ch_stat);
+		dev_dbg(&priv->pdev->dev, "OP=%d : destid=%x hc=%x off=%x\n",
+			do_wr ? MAINT_WR : MAINT_RD, destid, hopcount, offset);
+		iowrite32(TSI721_DMAC_INT_ALL, regs + TSI721_DMAC_INT);
+		iowrite32(TSI721_DMAC_CTL_INIT, regs + TSI721_DMAC_CTL);
+		udelay(10);
+		iowrite32(0, regs + TSI721_DMAC_DWRCNT);
+		udelay(1);
+		if (!do_wr)
+			*data = 0xffffffff;
+		err = -EIO;
+		goto err_out;
+	}
+
+	if (!do_wr)
+		*data = be32_to_cpu(bd_ptr[0].data[0]);
+
+	/*
+	 * Update descriptor status FIFO RD pointer.
+	 * NOTE: Skipping check and clear FIFO entries because we are waiting
+	 * for transfer to be completed.
+	 */
+	swr_ptr = ioread32(regs + TSI721_DMAC_DSWP);
+	iowrite32(swr_ptr, regs + TSI721_DMAC_DSRP);
+err_out:
+
+	return err;
+}
+
+/**
+ * tsi721_cread_dma - Generate a RapidIO maintenance read transaction
+ *                    using Tsi721 BDMA engine.
+ * @mport: RapidIO master port control structure
+ * @index: ID of RapdiIO interface
+ * @destid: Destination ID of transaction
+ * @hopcount: Number of hops to target device
+ * @offset: Offset into configuration space
+ * @len: Length (in bytes) of the maintenance transaction
+ * @val: Location to be read into
+ *
+ * Generates a RapidIO maintenance read transaction.
+ * Returns %0 on success and %-EINVAL or %-EFAULT on failure.
+ */
+static int tsi721_cread_dma(struct rio_mport *mport, int index, u16 destid,
+			u8 hopcount, u32 offset, int len, u32 *data)
+{
+	struct tsi721_device *priv = mport->priv;
+
+	return tsi721_maint_dma(priv, mport->sys_size, destid, hopcount,
+				offset, len, data, 0);
+}
+
+/**
+ * tsi721_cwrite_dma - Generate a RapidIO maintenance write transaction
+ *                     using Tsi721 BDMA engine
+ * @mport: RapidIO master port control structure
+ * @index: ID of RapdiIO interface
+ * @destid: Destination ID of transaction
+ * @hopcount: Number of hops to target device
+ * @offset: Offset into configuration space
+ * @len: Length (in bytes) of the maintenance transaction
+ * @val: Value to be written
+ *
+ * Generates a RapidIO maintenance write transaction.
+ * Returns %0 on success and %-EINVAL or %-EFAULT on failure.
+ */
+static int tsi721_cwrite_dma(struct rio_mport *mport, int index, u16 destid,
+			 u8 hopcount, u32 offset, int len, u32 data)
+{
+	struct tsi721_device *priv = mport->priv;
+	u32 temp = data;
+
+	return tsi721_maint_dma(priv, mport->sys_size, destid, hopcount,
+				offset, len, &temp, 1);
+}
+
+/**
+ * tsi721_pw_handler - Tsi721 inbound port-write interrupt handler
+ * @mport: RapidIO master port structure
+ *
+ * Handles inbound port-write interrupts. Copies PW message from an internal
+ * buffer into PW message FIFO and schedules deferred routine to process
+ * queued messages.
+ */
+static int
+tsi721_pw_handler(struct rio_mport *mport)
+{
+	struct tsi721_device *priv = mport->priv;
+	u32 pw_stat;
+	u32 pw_buf[TSI721_RIO_PW_MSG_SIZE/sizeof(u32)];
+
+
+	pw_stat = ioread32(priv->regs + TSI721_RIO_PW_RX_STAT);
+
+	if (pw_stat & TSI721_RIO_PW_RX_STAT_PW_VAL) {
+		pw_buf[0] = ioread32(priv->regs + TSI721_RIO_PW_RX_CAPT(0));
+		pw_buf[1] = ioread32(priv->regs + TSI721_RIO_PW_RX_CAPT(1));
+		pw_buf[2] = ioread32(priv->regs + TSI721_RIO_PW_RX_CAPT(2));
+		pw_buf[3] = ioread32(priv->regs + TSI721_RIO_PW_RX_CAPT(3));
+
+		/* Queue PW message (if there is room in FIFO),
+		 * otherwise discard it.
+		 */
+		spin_lock(&priv->pw_fifo_lock);
+		if (kfifo_avail(&priv->pw_fifo) >= TSI721_RIO_PW_MSG_SIZE)
+			kfifo_in(&priv->pw_fifo, pw_buf,
+						TSI721_RIO_PW_MSG_SIZE);
+		else
+			priv->pw_discard_count++;
+		spin_unlock(&priv->pw_fifo_lock);
+	}
+
+	/* Clear pending PW interrupts */
+	iowrite32(TSI721_RIO_PW_RX_STAT_PW_DISC | TSI721_RIO_PW_RX_STAT_PW_VAL,
+		  priv->regs + TSI721_RIO_PW_RX_STAT);
+
+	schedule_work(&priv->pw_work);
+
+	return 0;
+}
+
+static void tsi721_pw_dpc(struct work_struct *work)
+{
+	struct tsi721_device *priv = container_of(work, struct tsi721_device,
+						    pw_work);
+	u32 msg_buffer[RIO_PW_MSG_SIZE/sizeof(u32)]; /* Use full size PW message
+							buffer for RIO layer */
+
+	/*
+	 * Process port-write messages
+	 */
+	while (kfifo_out_spinlocked(&priv->pw_fifo, (unsigned char *)msg_buffer,
+			 TSI721_RIO_PW_MSG_SIZE, &priv->pw_fifo_lock)) {
+		/* Process one message */
+#ifdef DEBUG_PW
+		{
+		u32 i;
+		pr_debug("%s : Port-Write Message:", __func__);
+		for (i = 0; i < RIO_PW_MSG_SIZE/sizeof(u32); ) {
+			pr_debug("0x%02x: %08x %08x %08x %08x", i*4,
+				msg_buffer[i], msg_buffer[i + 1],
+				msg_buffer[i + 2], msg_buffer[i + 3]);
+			i += 4;
+		}
+		pr_debug("\n");
+		}
+#endif
+		/* Pass the port-write message to RIO core for processing */
+		rio_inb_pwrite_handler((union rio_pw_msg *)msg_buffer);
+	}
+}
+
+/**
+ * tsi721_pw_enable - enable/disable port-write interface init
+ * @mport: Master port implementing the port write unit
+ * @enable:    1=enable; 0=disable port-write message handling
+ */
+static int tsi721_pw_enable(struct rio_mport *mport, int enable)
+{
+	struct tsi721_device *priv = mport->priv;
+	u32 rval;
+
+	rval = ioread32(priv->regs + TSI721_RIO_EM_INT_ENABLE);
+
+	if (enable)
+		rval |= TSI721_RIO_EM_INT_ENABLE_PW_RX;
+	else
+		rval &= ~TSI721_RIO_EM_INT_ENABLE_PW_RX;
+
+	/* Clear pending PW interrupts */
+	iowrite32(TSI721_RIO_PW_RX_STAT_PW_DISC | TSI721_RIO_PW_RX_STAT_PW_VAL,
+		  priv->regs + TSI721_RIO_PW_RX_STAT);
+	/* Update enable bits */
+	iowrite32(rval, priv->regs + TSI721_RIO_EM_INT_ENABLE);
+
+	return 0;
+}
+
+/**
+ * tsi721_dsend - Send a RapidIO doorbell
+ * @mport: RapidIO master port info
+ * @index: ID of RapidIO interface
+ * @destid: Destination ID of target device
+ * @data: 16-bit info field of RapidIO doorbell
+ *
+ * Sends a RapidIO doorbell message. Always returns %0.
+ */
+static int tsi721_dsend(struct rio_mport *mport, int index,
+			u16 destid, u16 data)
+{
+	struct tsi721_device *priv = mport->priv;
+	u32 offset;
+
+	offset = (((mport->sys_size) ? RIO_TT_CODE_16 : RIO_TT_CODE_8) << 18) |
+		 (destid << 2);
+
+	dev_dbg(&priv->pdev->dev,
+		"Send Doorbell 0x%04x to destID 0x%x\n", data, destid);
+	iowrite16be(data, priv->odb_base + offset);
+
+	return 0;
+}
+
+/**
+ * tsi721_dbell_handler - Tsi721 doorbell interrupt handler
+ * @mport: RapidIO master port structure
+ *
+ * Handles inbound doorbell interrupts. Copies doorbell entry from an internal
+ * buffer into DB message FIFO and schedules deferred  routine to process
+ * queued DBs.
+ */
+static int
+tsi721_dbell_handler(struct rio_mport *mport)
+{
+	struct tsi721_device *priv = mport->priv;
+	u32 regval;
+
+	/* Disable IDB interrupts */
+	regval = ioread32(priv->regs + TSI721_SR_CHINTE(IDB_QUEUE));
+	regval &= ~TSI721_SR_CHINT_IDBQRCV;
+	iowrite32(regval,
+		priv->regs + TSI721_SR_CHINTE(IDB_QUEUE));
+
+	schedule_work(&priv->idb_work);
+
+	return 0;
+}
+
+static void tsi721_db_dpc(struct work_struct *work)
+{
+	struct tsi721_device *priv = container_of(work, struct tsi721_device,
+						    idb_work);
+	struct rio_mport *mport;
+	struct rio_dbell *dbell;
+	int found = 0;
+	u32 wr_ptr, rd_ptr;
+	u64 *idb_entry;
+	u32 regval;
+	union {
+		u64 msg;
+		u8  bytes[8];
+	} idb;
+
+	/*
+	 * Process queued inbound doorbells
+	 */
+	mport = priv->mport;
+
+	wr_ptr = ioread32(priv->regs + TSI721_IDQ_WP(IDB_QUEUE)) % IDB_QSIZE;
+	rd_ptr = ioread32(priv->regs + TSI721_IDQ_RP(IDB_QUEUE)) % IDB_QSIZE;
+
+	while (wr_ptr != rd_ptr) {
+		idb_entry = (u64 *)(priv->idb_base +
+					(TSI721_IDB_ENTRY_SIZE * rd_ptr));
+		rd_ptr++;
+		rd_ptr %= IDB_QSIZE;
+		idb.msg = *idb_entry;
+		*idb_entry = 0;
+
+		/* Process one doorbell */
+		list_for_each_entry(dbell, &mport->dbells, node) {
+			if ((dbell->res->start <= DBELL_INF(idb.bytes)) &&
+			    (dbell->res->end >= DBELL_INF(idb.bytes))) {
+				found = 1;
+				break;
+			}
+		}
+
+		if (found) {
+			dbell->dinb(mport, dbell->dev_id, DBELL_SID(idb.bytes),
+				    DBELL_TID(idb.bytes), DBELL_INF(idb.bytes));
+		} else {
+			dev_dbg(&priv->pdev->dev,
+				"spurious inb doorbell, sid %2.2x tid %2.2x"
+				" info %4.4x\n", DBELL_SID(idb.bytes),
+				DBELL_TID(idb.bytes), DBELL_INF(idb.bytes));
+		}
+
+		wr_ptr = ioread32(priv->regs +
+				  TSI721_IDQ_WP(IDB_QUEUE)) % IDB_QSIZE;
+	}
+
+	iowrite32(rd_ptr & (IDB_QSIZE - 1),
+		priv->regs + TSI721_IDQ_RP(IDB_QUEUE));
+
+	/* Re-enable IDB interrupts */
+	regval = ioread32(priv->regs + TSI721_SR_CHINTE(IDB_QUEUE));
+	regval |= TSI721_SR_CHINT_IDBQRCV;
+	iowrite32(regval,
+		priv->regs + TSI721_SR_CHINTE(IDB_QUEUE));
+
+	wr_ptr = ioread32(priv->regs + TSI721_IDQ_WP(IDB_QUEUE)) % IDB_QSIZE;
+	if (wr_ptr != rd_ptr)
+		schedule_work(&priv->idb_work);
+}
+
+/**
+ * tsi721_irqhandler - Tsi721 interrupt handler
+ * @irq: Linux interrupt number
+ * @ptr: Pointer to interrupt-specific data (mport structure)
+ *
+ * Handles Tsi721 interrupts signaled using MSI and INTA. Checks reported
+ * interrupt events and calls an event-specific handler(s).
+ */
+static irqreturn_t tsi721_irqhandler(int irq, void *ptr)
+{
+	struct rio_mport *mport = (struct rio_mport *)ptr;
+	struct tsi721_device *priv = mport->priv;
+	u32 dev_int;
+	u32 dev_ch_int;
+	u32 intval;
+	u32 ch_inte;
+
+	/* For MSI mode disable all device-level interrupts */
+	if (priv->flags & TSI721_USING_MSI)
+		iowrite32(0, priv->regs + TSI721_DEV_INTE);
+
+	dev_int = ioread32(priv->regs + TSI721_DEV_INT);
+	if (!dev_int)
+		return IRQ_NONE;
+
+	dev_ch_int = ioread32(priv->regs + TSI721_DEV_CHAN_INT);
+
+	if (dev_int & TSI721_DEV_INT_SR2PC_CH) {
+		/* Service SR2PC Channel interrupts */
+		if (dev_ch_int & TSI721_INT_SR2PC_CHAN(IDB_QUEUE)) {
+			/* Service Inbound Doorbell interrupt */
+			intval = ioread32(priv->regs +
+						TSI721_SR_CHINT(IDB_QUEUE));
+			if (intval & TSI721_SR_CHINT_IDBQRCV)
+				tsi721_dbell_handler(mport);
+			else
+				dev_info(&priv->pdev->dev,
+					"Unsupported SR_CH_INT %x\n", intval);
+
+			/* Clear interrupts */
+			iowrite32(intval,
+				priv->regs + TSI721_SR_CHINT(IDB_QUEUE));
+			ioread32(priv->regs + TSI721_SR_CHINT(IDB_QUEUE));
+		}
+	}
+
+	if (dev_int & TSI721_DEV_INT_SMSG_CH) {
+		int ch;
+
+		/*
+		 * Service channel interrupts from Messaging Engine
+		 */
+
+		if (dev_ch_int & TSI721_INT_IMSG_CHAN_M) { /* Inbound Msg */
+			/* Disable signaled OB MSG Channel interrupts */
+			ch_inte = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
+			ch_inte &= ~(dev_ch_int & TSI721_INT_IMSG_CHAN_M);
+			iowrite32(ch_inte, priv->regs + TSI721_DEV_CHAN_INTE);
+
+			/*
+			 * Process Inbound Message interrupt for each MBOX
+			 */
+			for (ch = 4; ch < RIO_MAX_MBOX + 4; ch++) {
+				if (!(dev_ch_int & TSI721_INT_IMSG_CHAN(ch)))
+					continue;
+				tsi721_imsg_handler(priv, ch);
+			}
+		}
+
+		if (dev_ch_int & TSI721_INT_OMSG_CHAN_M) { /* Outbound Msg */
+			/* Disable signaled OB MSG Channel interrupts */
+			ch_inte = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
+			ch_inte &= ~(dev_ch_int & TSI721_INT_OMSG_CHAN_M);
+			iowrite32(ch_inte, priv->regs + TSI721_DEV_CHAN_INTE);
+
+			/*
+			 * Process Outbound Message interrupts for each MBOX
+			 */
+
+			for (ch = 0; ch < RIO_MAX_MBOX; ch++) {
+				if (!(dev_ch_int & TSI721_INT_OMSG_CHAN(ch)))
+					continue;
+				tsi721_omsg_handler(priv, ch);
+			}
+		}
+	}
+
+	if (dev_int & TSI721_DEV_INT_SRIO) {
+		/* Service SRIO MAC interrupts */
+		intval = ioread32(priv->regs + TSI721_RIO_EM_INT_STAT);
+		if (intval & TSI721_RIO_EM_INT_STAT_PW_RX)
+			tsi721_pw_handler(mport);
+	}
+
+#ifdef CONFIG_RAPIDIO_DMA_ENGINE
+	if (dev_int & TSI721_DEV_INT_BDMA_CH) {
+		int ch;
+
+		if (dev_ch_int & TSI721_INT_BDMA_CHAN_M) {
+			dev_dbg(&priv->pdev->dev,
+				"IRQ from DMA channel 0x%08x\n", dev_ch_int);
+
+			for (ch = 0; ch < TSI721_DMA_MAXCH; ch++) {
+				if (!(dev_ch_int & TSI721_INT_BDMA_CHAN(ch)))
+					continue;
+				tsi721_bdma_handler(&priv->bdma[ch]);
+			}
+		}
+	}
+#endif
+
+	/* For MSI mode re-enable device-level interrupts */
+	if (priv->flags & TSI721_USING_MSI) {
+		dev_int = TSI721_DEV_INT_SR2PC_CH | TSI721_DEV_INT_SRIO |
+			TSI721_DEV_INT_SMSG_CH | TSI721_DEV_INT_BDMA_CH;
+		iowrite32(dev_int, priv->regs + TSI721_DEV_INTE);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void tsi721_interrupts_init(struct tsi721_device *priv)
+{
+	u32 intr;
+
+	/* Enable IDB interrupts */
+	iowrite32(TSI721_SR_CHINT_ALL,
+		priv->regs + TSI721_SR_CHINT(IDB_QUEUE));
+	iowrite32(TSI721_SR_CHINT_IDBQRCV,
+		priv->regs + TSI721_SR_CHINTE(IDB_QUEUE));
+
+	/* Enable SRIO MAC interrupts */
+	iowrite32(TSI721_RIO_EM_DEV_INT_EN_INT,
+		priv->regs + TSI721_RIO_EM_DEV_INT_EN);
+
+	/* Enable interrupts from channels in use */
+#ifdef CONFIG_RAPIDIO_DMA_ENGINE
+	intr = TSI721_INT_SR2PC_CHAN(IDB_QUEUE) |
+		(TSI721_INT_BDMA_CHAN_M &
+		 ~TSI721_INT_BDMA_CHAN(TSI721_DMACH_MAINT));
+#else
+	intr = TSI721_INT_SR2PC_CHAN(IDB_QUEUE);
+#endif
+	iowrite32(intr,	priv->regs + TSI721_DEV_CHAN_INTE);
+
+	if (priv->flags & TSI721_USING_MSIX)
+		intr = TSI721_DEV_INT_SRIO;
+	else
+		intr = TSI721_DEV_INT_SR2PC_CH | TSI721_DEV_INT_SRIO |
+			TSI721_DEV_INT_SMSG_CH | TSI721_DEV_INT_BDMA_CH;
+
+	iowrite32(intr, priv->regs + TSI721_DEV_INTE);
+	ioread32(priv->regs + TSI721_DEV_INTE);
+}
+
+#ifdef CONFIG_PCI_MSI
+/**
+ * tsi721_omsg_msix - MSI-X interrupt handler for outbound messaging
+ * @irq: Linux interrupt number
+ * @ptr: Pointer to interrupt-specific data (mport structure)
+ *
+ * Handles outbound messaging interrupts signaled using MSI-X.
+ */
+static irqreturn_t tsi721_omsg_msix(int irq, void *ptr)
+{
+	struct tsi721_device *priv = ((struct rio_mport *)ptr)->priv;
+	int mbox;
+
+	mbox = (irq - priv->msix[TSI721_VECT_OMB0_DONE].vector) % RIO_MAX_MBOX;
+	tsi721_omsg_handler(priv, mbox);
+	return IRQ_HANDLED;
+}
+
+/**
+ * tsi721_imsg_msix - MSI-X interrupt handler for inbound messaging
+ * @irq: Linux interrupt number
+ * @ptr: Pointer to interrupt-specific data (mport structure)
+ *
+ * Handles inbound messaging interrupts signaled using MSI-X.
+ */
+static irqreturn_t tsi721_imsg_msix(int irq, void *ptr)
+{
+	struct tsi721_device *priv = ((struct rio_mport *)ptr)->priv;
+	int mbox;
+
+	mbox = (irq - priv->msix[TSI721_VECT_IMB0_RCV].vector) % RIO_MAX_MBOX;
+	tsi721_imsg_handler(priv, mbox + 4);
+	return IRQ_HANDLED;
+}
+
+/**
+ * tsi721_srio_msix - Tsi721 MSI-X SRIO MAC interrupt handler
+ * @irq: Linux interrupt number
+ * @ptr: Pointer to interrupt-specific data (mport structure)
+ *
+ * Handles Tsi721 interrupts from SRIO MAC.
+ */
+static irqreturn_t tsi721_srio_msix(int irq, void *ptr)
+{
+	struct tsi721_device *priv = ((struct rio_mport *)ptr)->priv;
+	u32 srio_int;
+
+	/* Service SRIO MAC interrupts */
+	srio_int = ioread32(priv->regs + TSI721_RIO_EM_INT_STAT);
+	if (srio_int & TSI721_RIO_EM_INT_STAT_PW_RX)
+		tsi721_pw_handler((struct rio_mport *)ptr);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * tsi721_sr2pc_ch_msix - Tsi721 MSI-X SR2PC Channel interrupt handler
+ * @irq: Linux interrupt number
+ * @ptr: Pointer to interrupt-specific data (mport structure)
+ *
+ * Handles Tsi721 interrupts from SR2PC Channel.
+ * NOTE: At this moment services only one SR2PC channel associated with inbound
+ * doorbells.
+ */
+static irqreturn_t tsi721_sr2pc_ch_msix(int irq, void *ptr)
+{
+	struct tsi721_device *priv = ((struct rio_mport *)ptr)->priv;
+	u32 sr_ch_int;
+
+	/* Service Inbound DB interrupt from SR2PC channel */
+	sr_ch_int = ioread32(priv->regs + TSI721_SR_CHINT(IDB_QUEUE));
+	if (sr_ch_int & TSI721_SR_CHINT_IDBQRCV)
+		tsi721_dbell_handler((struct rio_mport *)ptr);
+
+	/* Clear interrupts */
+	iowrite32(sr_ch_int, priv->regs + TSI721_SR_CHINT(IDB_QUEUE));
+	/* Read back to ensure that interrupt was cleared */
+	sr_ch_int = ioread32(priv->regs + TSI721_SR_CHINT(IDB_QUEUE));
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * tsi721_request_msix - register interrupt service for MSI-X mode.
+ * @mport: RapidIO master port structure
+ *
+ * Registers MSI-X interrupt service routines for interrupts that are active
+ * immediately after mport initialization. Messaging interrupt service routines
+ * should be registered during corresponding open requests.
+ */
+static int tsi721_request_msix(struct rio_mport *mport)
+{
+	struct tsi721_device *priv = mport->priv;
+	int err = 0;
+
+	err = request_irq(priv->msix[TSI721_VECT_IDB].vector,
+			tsi721_sr2pc_ch_msix, 0,
+			priv->msix[TSI721_VECT_IDB].irq_name, (void *)mport);
+	if (err)
+		goto out;
+
+	err = request_irq(priv->msix[TSI721_VECT_PWRX].vector,
+			tsi721_srio_msix, 0,
+			priv->msix[TSI721_VECT_PWRX].irq_name, (void *)mport);
+	if (err)
+		free_irq(
+			priv->msix[TSI721_VECT_IDB].vector,
+			(void *)mport);
+out:
+	return err;
+}
+
+/**
+ * tsi721_enable_msix - Attempts to enable MSI-X support for Tsi721.
+ * @priv: pointer to tsi721 private data
+ *
+ * Configures MSI-X support for Tsi721. Supports only an exact number
+ * of requested vectors.
+ */
+static int tsi721_enable_msix(struct tsi721_device *priv)
+{
+	struct msix_entry entries[TSI721_VECT_MAX];
+	int err;
+	int i;
+
+	entries[TSI721_VECT_IDB].entry = TSI721_MSIX_SR2PC_IDBQ_RCV(IDB_QUEUE);
+	entries[TSI721_VECT_PWRX].entry = TSI721_MSIX_SRIO_MAC_INT;
+
+	/*
+	 * Initialize MSI-X entries for Messaging Engine:
+	 * this driver supports four RIO mailboxes (inbound and outbound)
+	 * NOTE: Inbound message MBOX 0...4 use IB channels 4...7. Therefore
+	 * offset +4 is added to IB MBOX number.
+	 */
+	for (i = 0; i < RIO_MAX_MBOX; i++) {
+		entries[TSI721_VECT_IMB0_RCV + i].entry =
+					TSI721_MSIX_IMSG_DQ_RCV(i + 4);
+		entries[TSI721_VECT_IMB0_INT + i].entry =
+					TSI721_MSIX_IMSG_INT(i + 4);
+		entries[TSI721_VECT_OMB0_DONE + i].entry =
+					TSI721_MSIX_OMSG_DONE(i);
+		entries[TSI721_VECT_OMB0_INT + i].entry =
+					TSI721_MSIX_OMSG_INT(i);
+	}
+
+#ifdef CONFIG_RAPIDIO_DMA_ENGINE
+	/*
+	 * Initialize MSI-X entries for Block DMA Engine:
+	 * this driver supports XXX DMA channels
+	 * (one is reserved for SRIO maintenance transactions)
+	 */
+	for (i = 0; i < TSI721_DMA_CHNUM; i++) {
+		entries[TSI721_VECT_DMA0_DONE + i].entry =
+					TSI721_MSIX_DMACH_DONE(i);
+		entries[TSI721_VECT_DMA0_INT + i].entry =
+					TSI721_MSIX_DMACH_INT(i);
+	}
+#endif /* CONFIG_RAPIDIO_DMA_ENGINE */
+
+	err = pci_enable_msix_exact(priv->pdev, entries, ARRAY_SIZE(entries));
+	if (err) {
+		dev_err(&priv->pdev->dev,
+			"Failed to enable MSI-X (err=%d)\n", err);
+		return err;
+	}
+
+	/*
+	 * Copy MSI-X vector information into tsi721 private structure
+	 */
+	priv->msix[TSI721_VECT_IDB].vector = entries[TSI721_VECT_IDB].vector;
+	snprintf(priv->msix[TSI721_VECT_IDB].irq_name, IRQ_DEVICE_NAME_MAX,
+		 DRV_NAME "-idb@pci:%s", pci_name(priv->pdev));
+	priv->msix[TSI721_VECT_PWRX].vector = entries[TSI721_VECT_PWRX].vector;
+	snprintf(priv->msix[TSI721_VECT_PWRX].irq_name, IRQ_DEVICE_NAME_MAX,
+		 DRV_NAME "-pwrx@pci:%s", pci_name(priv->pdev));
+
+	for (i = 0; i < RIO_MAX_MBOX; i++) {
+		priv->msix[TSI721_VECT_IMB0_RCV + i].vector =
+				entries[TSI721_VECT_IMB0_RCV + i].vector;
+		snprintf(priv->msix[TSI721_VECT_IMB0_RCV + i].irq_name,
+			 IRQ_DEVICE_NAME_MAX, DRV_NAME "-imbr%d@pci:%s",
+			 i, pci_name(priv->pdev));
+
+		priv->msix[TSI721_VECT_IMB0_INT + i].vector =
+				entries[TSI721_VECT_IMB0_INT + i].vector;
+		snprintf(priv->msix[TSI721_VECT_IMB0_INT + i].irq_name,
+			 IRQ_DEVICE_NAME_MAX, DRV_NAME "-imbi%d@pci:%s",
+			 i, pci_name(priv->pdev));
+
+		priv->msix[TSI721_VECT_OMB0_DONE + i].vector =
+				entries[TSI721_VECT_OMB0_DONE + i].vector;
+		snprintf(priv->msix[TSI721_VECT_OMB0_DONE + i].irq_name,
+			 IRQ_DEVICE_NAME_MAX, DRV_NAME "-ombd%d@pci:%s",
+			 i, pci_name(priv->pdev));
+
+		priv->msix[TSI721_VECT_OMB0_INT + i].vector =
+				entries[TSI721_VECT_OMB0_INT + i].vector;
+		snprintf(priv->msix[TSI721_VECT_OMB0_INT + i].irq_name,
+			 IRQ_DEVICE_NAME_MAX, DRV_NAME "-ombi%d@pci:%s",
+			 i, pci_name(priv->pdev));
+	}
+
+#ifdef CONFIG_RAPIDIO_DMA_ENGINE
+	for (i = 0; i < TSI721_DMA_CHNUM; i++) {
+		priv->msix[TSI721_VECT_DMA0_DONE + i].vector =
+				entries[TSI721_VECT_DMA0_DONE + i].vector;
+		snprintf(priv->msix[TSI721_VECT_DMA0_DONE + i].irq_name,
+			 IRQ_DEVICE_NAME_MAX, DRV_NAME "-dmad%d@pci:%s",
+			 i, pci_name(priv->pdev));
+
+		priv->msix[TSI721_VECT_DMA0_INT + i].vector =
+				entries[TSI721_VECT_DMA0_INT + i].vector;
+		snprintf(priv->msix[TSI721_VECT_DMA0_INT + i].irq_name,
+			 IRQ_DEVICE_NAME_MAX, DRV_NAME "-dmai%d@pci:%s",
+			 i, pci_name(priv->pdev));
+	}
+#endif /* CONFIG_RAPIDIO_DMA_ENGINE */
+
+	return 0;
+}
+#endif /* CONFIG_PCI_MSI */
+
+static int tsi721_request_irq(struct rio_mport *mport)
+{
+	struct tsi721_device *priv = mport->priv;
+	int err;
+
+#ifdef CONFIG_PCI_MSI
+	if (priv->flags & TSI721_USING_MSIX)
+		err = tsi721_request_msix(mport);
+	else
+#endif
+		err = request_irq(priv->pdev->irq, tsi721_irqhandler,
+			  (priv->flags & TSI721_USING_MSI) ? 0 : IRQF_SHARED,
+			  DRV_NAME, (void *)mport);
+
+	if (err)
+		dev_err(&priv->pdev->dev,
+			"Unable to allocate interrupt, Error: %d\n", err);
+
+	return err;
+}
+
+/**
+ * tsi721_init_pc2sr_mapping - initializes outbound (PCIe->SRIO)
+ * translation regions.
+ * @priv: pointer to tsi721 private data
+ *
+ * Disables SREP translation regions.
+ */
+static void tsi721_init_pc2sr_mapping(struct tsi721_device *priv)
+{
+	int i;
+
+	/* Disable all PC2SR translation windows */
+	for (i = 0; i < TSI721_OBWIN_NUM; i++)
+		iowrite32(0, priv->regs + TSI721_OBWINLB(i));
+}
+
+/**
+ * tsi721_rio_map_inb_mem -- Mapping inbound memory region.
+ * @mport: RapidIO master port
+ * @lstart: Local memory space start address.
+ * @rstart: RapidIO space start address.
+ * @size: The mapping region size.
+ * @flags: Flags for mapping. 0 for using default flags.
+ *
+ * Return: 0 -- Success.
+ *
+ * This function will create the inbound mapping
+ * from rstart to lstart.
+ */
+static int tsi721_rio_map_inb_mem(struct rio_mport *mport, dma_addr_t lstart,
+		u64 rstart, u32 size, u32 flags)
+{
+	struct tsi721_device *priv = mport->priv;
+	int i;
+	u32 regval;
+
+	if (!is_power_of_2(size) || size < 0x1000 ||
+	    ((u64)lstart & (size - 1)) || (rstart & (size - 1)))
+		return -EINVAL;
+
+	/* Search for free inbound translation window */
+	for (i = 0; i < TSI721_IBWIN_NUM; i++) {
+		regval = ioread32(priv->regs + TSI721_IBWIN_LB(i));
+		if (!(regval & TSI721_IBWIN_LB_WEN))
+			break;
+	}
+
+	if (i >= TSI721_IBWIN_NUM) {
+		dev_err(&priv->pdev->dev,
+			"Unable to find free inbound window\n");
+		return -EBUSY;
+	}
+
+	iowrite32(TSI721_IBWIN_SIZE(size) << 8,
+			priv->regs + TSI721_IBWIN_SZ(i));
+
+	iowrite32(((u64)lstart >> 32), priv->regs + TSI721_IBWIN_TUA(i));
+	iowrite32(((u64)lstart & TSI721_IBWIN_TLA_ADD),
+		  priv->regs + TSI721_IBWIN_TLA(i));
+
+	iowrite32(rstart >> 32, priv->regs + TSI721_IBWIN_UB(i));
+	iowrite32((rstart & TSI721_IBWIN_LB_BA) | TSI721_IBWIN_LB_WEN,
+		priv->regs + TSI721_IBWIN_LB(i));
+	dev_dbg(&priv->pdev->dev,
+		"Configured IBWIN%d mapping (RIO_0x%llx -> PCIe_0x%llx)\n",
+		i, rstart, (unsigned long long)lstart);
+
+	return 0;
+}
+
+/**
+ * fsl_rio_unmap_inb_mem -- Unmapping inbound memory region.
+ * @mport: RapidIO master port
+ * @lstart: Local memory space start address.
+ */
+static void tsi721_rio_unmap_inb_mem(struct rio_mport *mport,
+				dma_addr_t lstart)
+{
+	struct tsi721_device *priv = mport->priv;
+	int i;
+	u64 addr;
+	u32 regval;
+
+	/* Search for matching active inbound translation window */
+	for (i = 0; i < TSI721_IBWIN_NUM; i++) {
+		regval = ioread32(priv->regs + TSI721_IBWIN_LB(i));
+		if (regval & TSI721_IBWIN_LB_WEN) {
+			regval = ioread32(priv->regs + TSI721_IBWIN_TUA(i));
+			addr = (u64)regval << 32;
+			regval = ioread32(priv->regs + TSI721_IBWIN_TLA(i));
+			addr |= regval & TSI721_IBWIN_TLA_ADD;
+
+			if (addr == (u64)lstart) {
+				iowrite32(0, priv->regs + TSI721_IBWIN_LB(i));
+				break;
+			}
+		}
+	}
+}
+
+/**
+ * tsi721_init_sr2pc_mapping - initializes inbound (SRIO->PCIe)
+ * translation regions.
+ * @priv: pointer to tsi721 private data
+ *
+ * Disables inbound windows.
+ */
+static void tsi721_init_sr2pc_mapping(struct tsi721_device *priv)
+{
+	int i;
+
+	/* Disable all SR2PC inbound windows */
+	for (i = 0; i < TSI721_IBWIN_NUM; i++)
+		iowrite32(0, priv->regs + TSI721_IBWIN_LB(i));
+}
+
+/**
+ * tsi721_port_write_init - Inbound port write interface init
+ * @priv: pointer to tsi721 private data
+ *
+ * Initializes inbound port write handler.
+ * Returns %0 on success or %-ENOMEM on failure.
+ */
+static int tsi721_port_write_init(struct tsi721_device *priv)
+{
+	priv->pw_discard_count = 0;
+	INIT_WORK(&priv->pw_work, tsi721_pw_dpc);
+	spin_lock_init(&priv->pw_fifo_lock);
+	if (kfifo_alloc(&priv->pw_fifo,
+			TSI721_RIO_PW_MSG_SIZE * 32, GFP_KERNEL)) {
+		dev_err(&priv->pdev->dev, "PW FIFO allocation failed\n");
+		return -ENOMEM;
+	}
+
+	/* Use reliable port-write capture mode */
+	iowrite32(TSI721_RIO_PW_CTL_PWC_REL, priv->regs + TSI721_RIO_PW_CTL);
+	return 0;
+}
+
+static int tsi721_doorbell_init(struct tsi721_device *priv)
+{
+	/* Outbound Doorbells do not require any setup.
+	 * Tsi721 uses dedicated PCI BAR1 to generate doorbells.
+	 * That BAR1 was mapped during the probe routine.
+	 */
+
+	/* Initialize Inbound Doorbell processing DPC and queue */
+	priv->db_discard_count = 0;
+	INIT_WORK(&priv->idb_work, tsi721_db_dpc);
+
+	/* Allocate buffer for inbound doorbells queue */
+	priv->idb_base = dma_zalloc_coherent(&priv->pdev->dev,
+				IDB_QSIZE * TSI721_IDB_ENTRY_SIZE,
+				&priv->idb_dma, GFP_KERNEL);
+	if (!priv->idb_base)
+		return -ENOMEM;
+
+	dev_dbg(&priv->pdev->dev, "Allocated IDB buffer @ %p (phys = %llx)\n",
+		priv->idb_base, (unsigned long long)priv->idb_dma);
+
+	iowrite32(TSI721_IDQ_SIZE_VAL(IDB_QSIZE),
+		priv->regs + TSI721_IDQ_SIZE(IDB_QUEUE));
+	iowrite32(((u64)priv->idb_dma >> 32),
+		priv->regs + TSI721_IDQ_BASEU(IDB_QUEUE));
+	iowrite32(((u64)priv->idb_dma & TSI721_IDQ_BASEL_ADDR),
+		priv->regs + TSI721_IDQ_BASEL(IDB_QUEUE));
+	/* Enable accepting all inbound doorbells */
+	iowrite32(0, priv->regs + TSI721_IDQ_MASK(IDB_QUEUE));
+
+	iowrite32(TSI721_IDQ_INIT, priv->regs + TSI721_IDQ_CTL(IDB_QUEUE));
+
+	iowrite32(0, priv->regs + TSI721_IDQ_RP(IDB_QUEUE));
+
+	return 0;
+}
+
+static void tsi721_doorbell_free(struct tsi721_device *priv)
+{
+	if (priv->idb_base == NULL)
+		return;
+
+	/* Free buffer allocated for inbound doorbell queue */
+	dma_free_coherent(&priv->pdev->dev, IDB_QSIZE * TSI721_IDB_ENTRY_SIZE,
+			  priv->idb_base, priv->idb_dma);
+	priv->idb_base = NULL;
+}
+
+/**
+ * tsi721_bdma_maint_init - Initialize maintenance request BDMA channel.
+ * @priv: pointer to tsi721 private data
+ *
+ * Initialize BDMA channel allocated for RapidIO maintenance read/write
+ * request generation
+ * Returns %0 on success or %-ENOMEM on failure.
+ */
+static int tsi721_bdma_maint_init(struct tsi721_device *priv)
+{
+	struct tsi721_dma_desc *bd_ptr;
+	u64		*sts_ptr;
+	dma_addr_t	bd_phys, sts_phys;
+	int		sts_size;
+	int		bd_num = 2;
+	void __iomem	*regs;
+
+	dev_dbg(&priv->pdev->dev,
+		"Init Block DMA Engine for Maintenance requests, CH%d\n",
+		TSI721_DMACH_MAINT);
+
+	/*
+	 * Initialize DMA channel for maintenance requests
+	 */
+
+	priv->mdma.ch_id = TSI721_DMACH_MAINT;
+	regs = priv->regs + TSI721_DMAC_BASE(TSI721_DMACH_MAINT);
+
+	/* Allocate space for DMA descriptors */
+	bd_ptr = dma_zalloc_coherent(&priv->pdev->dev,
+					bd_num * sizeof(struct tsi721_dma_desc),
+					&bd_phys, GFP_KERNEL);
+	if (!bd_ptr)
+		return -ENOMEM;
+
+	priv->mdma.bd_num = bd_num;
+	priv->mdma.bd_phys = bd_phys;
+	priv->mdma.bd_base = bd_ptr;
+
+	dev_dbg(&priv->pdev->dev, "DMA descriptors @ %p (phys = %llx)\n",
+		bd_ptr, (unsigned long long)bd_phys);
+
+	/* Allocate space for descriptor status FIFO */
+	sts_size = (bd_num >= TSI721_DMA_MINSTSSZ) ?
+					bd_num : TSI721_DMA_MINSTSSZ;
+	sts_size = roundup_pow_of_two(sts_size);
+	sts_ptr = dma_zalloc_coherent(&priv->pdev->dev,
+				     sts_size * sizeof(struct tsi721_dma_sts),
+				     &sts_phys, GFP_KERNEL);
+	if (!sts_ptr) {
+		/* Free space allocated for DMA descriptors */
+		dma_free_coherent(&priv->pdev->dev,
+				  bd_num * sizeof(struct tsi721_dma_desc),
+				  bd_ptr, bd_phys);
+		priv->mdma.bd_base = NULL;
+		return -ENOMEM;
+	}
+
+	priv->mdma.sts_phys = sts_phys;
+	priv->mdma.sts_base = sts_ptr;
+	priv->mdma.sts_size = sts_size;
+
+	dev_dbg(&priv->pdev->dev,
+		"desc status FIFO @ %p (phys = %llx) size=0x%x\n",
+		sts_ptr, (unsigned long long)sts_phys, sts_size);
+
+	/* Initialize DMA descriptors ring */
+	bd_ptr[bd_num - 1].type_id = cpu_to_le32(DTYPE3 << 29);
+	bd_ptr[bd_num - 1].next_lo = cpu_to_le32((u64)bd_phys &
+						 TSI721_DMAC_DPTRL_MASK);
+	bd_ptr[bd_num - 1].next_hi = cpu_to_le32((u64)bd_phys >> 32);
+
+	/* Setup DMA descriptor pointers */
+	iowrite32(((u64)bd_phys >> 32),	regs + TSI721_DMAC_DPTRH);
+	iowrite32(((u64)bd_phys & TSI721_DMAC_DPTRL_MASK),
+		regs + TSI721_DMAC_DPTRL);
+
+	/* Setup descriptor status FIFO */
+	iowrite32(((u64)sts_phys >> 32), regs + TSI721_DMAC_DSBH);
+	iowrite32(((u64)sts_phys & TSI721_DMAC_DSBL_MASK),
+		regs + TSI721_DMAC_DSBL);
+	iowrite32(TSI721_DMAC_DSSZ_SIZE(sts_size),
+		regs + TSI721_DMAC_DSSZ);
+
+	/* Clear interrupt bits */
+	iowrite32(TSI721_DMAC_INT_ALL, regs + TSI721_DMAC_INT);
+
+	ioread32(regs + TSI721_DMAC_INT);
+
+	/* Toggle DMA channel initialization */
+	iowrite32(TSI721_DMAC_CTL_INIT,	regs + TSI721_DMAC_CTL);
+	ioread32(regs + TSI721_DMAC_CTL);
+	udelay(10);
+
+	return 0;
+}
+
+static int tsi721_bdma_maint_free(struct tsi721_device *priv)
+{
+	u32 ch_stat;
+	struct tsi721_bdma_maint *mdma = &priv->mdma;
+	void __iomem *regs = priv->regs + TSI721_DMAC_BASE(mdma->ch_id);
+
+	if (mdma->bd_base == NULL)
+		return 0;
+
+	/* Check if DMA channel still running */
+	ch_stat = ioread32(regs + TSI721_DMAC_STS);
+	if (ch_stat & TSI721_DMAC_STS_RUN)
+		return -EFAULT;
+
+	/* Put DMA channel into init state */
+	iowrite32(TSI721_DMAC_CTL_INIT,	regs + TSI721_DMAC_CTL);
+
+	/* Free space allocated for DMA descriptors */
+	dma_free_coherent(&priv->pdev->dev,
+		mdma->bd_num * sizeof(struct tsi721_dma_desc),
+		mdma->bd_base, mdma->bd_phys);
+	mdma->bd_base = NULL;
+
+	/* Free space allocated for status FIFO */
+	dma_free_coherent(&priv->pdev->dev,
+		mdma->sts_size * sizeof(struct tsi721_dma_sts),
+		mdma->sts_base, mdma->sts_phys);
+	mdma->sts_base = NULL;
+	return 0;
+}
+
+/* Enable Inbound Messaging Interrupts */
+static void
+tsi721_imsg_interrupt_enable(struct tsi721_device *priv, int ch,
+				  u32 inte_mask)
+{
+	u32 rval;
+
+	if (!inte_mask)
+		return;
+
+	/* Clear pending Inbound Messaging interrupts */
+	iowrite32(inte_mask, priv->regs + TSI721_IBDMAC_INT(ch));
+
+	/* Enable Inbound Messaging interrupts */
+	rval = ioread32(priv->regs + TSI721_IBDMAC_INTE(ch));
+	iowrite32(rval | inte_mask, priv->regs + TSI721_IBDMAC_INTE(ch));
+
+	if (priv->flags & TSI721_USING_MSIX)
+		return; /* Finished if we are in MSI-X mode */
+
+	/*
+	 * For MSI and INTA interrupt signalling we need to enable next levels
+	 */
+
+	/* Enable Device Channel Interrupt */
+	rval = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
+	iowrite32(rval | TSI721_INT_IMSG_CHAN(ch),
+		  priv->regs + TSI721_DEV_CHAN_INTE);
+}
+
+/* Disable Inbound Messaging Interrupts */
+static void
+tsi721_imsg_interrupt_disable(struct tsi721_device *priv, int ch,
+				   u32 inte_mask)
+{
+	u32 rval;
+
+	if (!inte_mask)
+		return;
+
+	/* Clear pending Inbound Messaging interrupts */
+	iowrite32(inte_mask, priv->regs + TSI721_IBDMAC_INT(ch));
+
+	/* Disable Inbound Messaging interrupts */
+	rval = ioread32(priv->regs + TSI721_IBDMAC_INTE(ch));
+	rval &= ~inte_mask;
+	iowrite32(rval, priv->regs + TSI721_IBDMAC_INTE(ch));
+
+	if (priv->flags & TSI721_USING_MSIX)
+		return; /* Finished if we are in MSI-X mode */
+
+	/*
+	 * For MSI and INTA interrupt signalling we need to disable next levels
+	 */
+
+	/* Disable Device Channel Interrupt */
+	rval = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
+	rval &= ~TSI721_INT_IMSG_CHAN(ch);
+	iowrite32(rval, priv->regs + TSI721_DEV_CHAN_INTE);
+}
+
+/* Enable Outbound Messaging interrupts */
+static void
+tsi721_omsg_interrupt_enable(struct tsi721_device *priv, int ch,
+				  u32 inte_mask)
+{
+	u32 rval;
+
+	if (!inte_mask)
+		return;
+
+	/* Clear pending Outbound Messaging interrupts */
+	iowrite32(inte_mask, priv->regs + TSI721_OBDMAC_INT(ch));
+
+	/* Enable Outbound Messaging channel interrupts */
+	rval = ioread32(priv->regs + TSI721_OBDMAC_INTE(ch));
+	iowrite32(rval | inte_mask, priv->regs + TSI721_OBDMAC_INTE(ch));
+
+	if (priv->flags & TSI721_USING_MSIX)
+		return; /* Finished if we are in MSI-X mode */
+
+	/*
+	 * For MSI and INTA interrupt signalling we need to enable next levels
+	 */
+
+	/* Enable Device Channel Interrupt */
+	rval = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
+	iowrite32(rval | TSI721_INT_OMSG_CHAN(ch),
+		  priv->regs + TSI721_DEV_CHAN_INTE);
+}
+
+/* Disable Outbound Messaging interrupts */
+static void
+tsi721_omsg_interrupt_disable(struct tsi721_device *priv, int ch,
+				   u32 inte_mask)
+{
+	u32 rval;
+
+	if (!inte_mask)
+		return;
+
+	/* Clear pending Outbound Messaging interrupts */
+	iowrite32(inte_mask, priv->regs + TSI721_OBDMAC_INT(ch));
+
+	/* Disable Outbound Messaging interrupts */
+	rval = ioread32(priv->regs + TSI721_OBDMAC_INTE(ch));
+	rval &= ~inte_mask;
+	iowrite32(rval, priv->regs + TSI721_OBDMAC_INTE(ch));
+
+	if (priv->flags & TSI721_USING_MSIX)
+		return; /* Finished if we are in MSI-X mode */
+
+	/*
+	 * For MSI and INTA interrupt signalling we need to disable next levels
+	 */
+
+	/* Disable Device Channel Interrupt */
+	rval = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
+	rval &= ~TSI721_INT_OMSG_CHAN(ch);
+	iowrite32(rval, priv->regs + TSI721_DEV_CHAN_INTE);
+}
+
+/**
+ * tsi721_add_outb_message - Add message to the Tsi721 outbound message queue
+ * @mport: Master port with outbound message queue
+ * @rdev: Target of outbound message
+ * @mbox: Outbound mailbox
+ * @buffer: Message to add to outbound queue
+ * @len: Length of message
+ */
+static int
+tsi721_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev, int mbox,
+			void *buffer, size_t len)
+{
+	struct tsi721_device *priv = mport->priv;
+	struct tsi721_omsg_desc *desc;
+	u32 tx_slot;
+
+	if (!priv->omsg_init[mbox] ||
+	    len > TSI721_MSG_MAX_SIZE || len < 8)
+		return -EINVAL;
+
+	tx_slot = priv->omsg_ring[mbox].tx_slot;
+
+	/* Copy copy message into transfer buffer */
+	memcpy(priv->omsg_ring[mbox].omq_base[tx_slot], buffer, len);
+
+	if (len & 0x7)
+		len += 8;
+
+	/* Build descriptor associated with buffer */
+	desc = priv->omsg_ring[mbox].omd_base;
+	desc[tx_slot].type_id = cpu_to_le32((DTYPE4 << 29) | rdev->destid);
+	if (tx_slot % 4 == 0)
+		desc[tx_slot].type_id |= cpu_to_le32(TSI721_OMD_IOF);
+
+	desc[tx_slot].msg_info =
+		cpu_to_le32((mport->sys_size << 26) | (mbox << 22) |
+			    (0xe << 12) | (len & 0xff8));
+	desc[tx_slot].bufptr_lo =
+		cpu_to_le32((u64)priv->omsg_ring[mbox].omq_phys[tx_slot] &
+			    0xffffffff);
+	desc[tx_slot].bufptr_hi =
+		cpu_to_le32((u64)priv->omsg_ring[mbox].omq_phys[tx_slot] >> 32);
+
+	priv->omsg_ring[mbox].wr_count++;
+
+	/* Go to next descriptor */
+	if (++priv->omsg_ring[mbox].tx_slot == priv->omsg_ring[mbox].size) {
+		priv->omsg_ring[mbox].tx_slot = 0;
+		/* Move through the ring link descriptor at the end */
+		priv->omsg_ring[mbox].wr_count++;
+	}
+
+	mb();
+
+	/* Set new write count value */
+	iowrite32(priv->omsg_ring[mbox].wr_count,
+		priv->regs + TSI721_OBDMAC_DWRCNT(mbox));
+	ioread32(priv->regs + TSI721_OBDMAC_DWRCNT(mbox));
+
+	return 0;
+}
+
+/**
+ * tsi721_omsg_handler - Outbound Message Interrupt Handler
+ * @priv: pointer to tsi721 private data
+ * @ch:   number of OB MSG channel to service
+ *
+ * Services channel interrupts from outbound messaging engine.
+ */
+static void tsi721_omsg_handler(struct tsi721_device *priv, int ch)
+{
+	u32 omsg_int;
+
+	spin_lock(&priv->omsg_ring[ch].lock);
+
+	omsg_int = ioread32(priv->regs + TSI721_OBDMAC_INT(ch));
+
+	if (omsg_int & TSI721_OBDMAC_INT_ST_FULL)
+		dev_info(&priv->pdev->dev,
+			"OB MBOX%d: Status FIFO is full\n", ch);
+
+	if (omsg_int & (TSI721_OBDMAC_INT_DONE | TSI721_OBDMAC_INT_IOF_DONE)) {
+		u32 srd_ptr;
+		u64 *sts_ptr, last_ptr = 0, prev_ptr = 0;
+		int i, j;
+		u32 tx_slot;
+
+		/*
+		 * Find last successfully processed descriptor
+		 */
+
+		/* Check and clear descriptor status FIFO entries */
+		srd_ptr = priv->omsg_ring[ch].sts_rdptr;
+		sts_ptr = priv->omsg_ring[ch].sts_base;
+		j = srd_ptr * 8;
+		while (sts_ptr[j]) {
+			for (i = 0; i < 8 && sts_ptr[j]; i++, j++) {
+				prev_ptr = last_ptr;
+				last_ptr = le64_to_cpu(sts_ptr[j]);
+				sts_ptr[j] = 0;
+			}
+
+			++srd_ptr;
+			srd_ptr %= priv->omsg_ring[ch].sts_size;
+			j = srd_ptr * 8;
+		}
+
+		if (last_ptr == 0)
+			goto no_sts_update;
+
+		priv->omsg_ring[ch].sts_rdptr = srd_ptr;
+		iowrite32(srd_ptr, priv->regs + TSI721_OBDMAC_DSRP(ch));
+
+		if (!priv->mport->outb_msg[ch].mcback)
+			goto no_sts_update;
+
+		/* Inform upper layer about transfer completion */
+
+		tx_slot = (last_ptr - (u64)priv->omsg_ring[ch].omd_phys)/
+						sizeof(struct tsi721_omsg_desc);
+
+		/*
+		 * Check if this is a Link Descriptor (LD).
+		 * If yes, ignore LD and use descriptor processed
+		 * before LD.
+		 */
+		if (tx_slot == priv->omsg_ring[ch].size) {
+			if (prev_ptr)
+				tx_slot = (prev_ptr -
+					(u64)priv->omsg_ring[ch].omd_phys)/
+						sizeof(struct tsi721_omsg_desc);
+			else
+				goto no_sts_update;
+		}
+
+		/* Move slot index to the next message to be sent */
+		++tx_slot;
+		if (tx_slot == priv->omsg_ring[ch].size)
+			tx_slot = 0;
+		BUG_ON(tx_slot >= priv->omsg_ring[ch].size);
+		priv->mport->outb_msg[ch].mcback(priv->mport,
+				priv->omsg_ring[ch].dev_id, ch,
+				tx_slot);
+	}
+
+no_sts_update:
+
+	if (omsg_int & TSI721_OBDMAC_INT_ERROR) {
+		/*
+		* Outbound message operation aborted due to error,
+		* reinitialize OB MSG channel
+		*/
+
+		dev_dbg(&priv->pdev->dev, "OB MSG ABORT ch_stat=%x\n",
+			ioread32(priv->regs + TSI721_OBDMAC_STS(ch)));
+
+		iowrite32(TSI721_OBDMAC_INT_ERROR,
+				priv->regs + TSI721_OBDMAC_INT(ch));
+		iowrite32(TSI721_OBDMAC_CTL_INIT,
+				priv->regs + TSI721_OBDMAC_CTL(ch));
+		ioread32(priv->regs + TSI721_OBDMAC_CTL(ch));
+
+		/* Inform upper level to clear all pending tx slots */
+		if (priv->mport->outb_msg[ch].mcback)
+			priv->mport->outb_msg[ch].mcback(priv->mport,
+					priv->omsg_ring[ch].dev_id, ch,
+					priv->omsg_ring[ch].tx_slot);
+		/* Synch tx_slot tracking */
+		iowrite32(priv->omsg_ring[ch].tx_slot,
+			priv->regs + TSI721_OBDMAC_DRDCNT(ch));
+		ioread32(priv->regs + TSI721_OBDMAC_DRDCNT(ch));
+		priv->omsg_ring[ch].wr_count = priv->omsg_ring[ch].tx_slot;
+		priv->omsg_ring[ch].sts_rdptr = 0;
+	}
+
+	/* Clear channel interrupts */
+	iowrite32(omsg_int, priv->regs + TSI721_OBDMAC_INT(ch));
+
+	if (!(priv->flags & TSI721_USING_MSIX)) {
+		u32 ch_inte;
+
+		/* Re-enable channel interrupts */
+		ch_inte = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
+		ch_inte |= TSI721_INT_OMSG_CHAN(ch);
+		iowrite32(ch_inte, priv->regs + TSI721_DEV_CHAN_INTE);
+	}
+
+	spin_unlock(&priv->omsg_ring[ch].lock);
+}
+
+/**
+ * tsi721_open_outb_mbox - Initialize Tsi721 outbound mailbox
+ * @mport: Master port implementing Outbound Messaging Engine
+ * @dev_id: Device specific pointer to pass on event
+ * @mbox: Mailbox to open
+ * @entries: Number of entries in the outbound mailbox ring
+ */
+static int tsi721_open_outb_mbox(struct rio_mport *mport, void *dev_id,
+				 int mbox, int entries)
+{
+	struct tsi721_device *priv = mport->priv;
+	struct tsi721_omsg_desc *bd_ptr;
+	int i, rc = 0;
+
+	if ((entries < TSI721_OMSGD_MIN_RING_SIZE) ||
+	    (entries > (TSI721_OMSGD_RING_SIZE)) ||
+	    (!is_power_of_2(entries)) || mbox >= RIO_MAX_MBOX) {
+		rc = -EINVAL;
+		goto out;
+	}
+
+	priv->omsg_ring[mbox].dev_id = dev_id;
+	priv->omsg_ring[mbox].size = entries;
+	priv->omsg_ring[mbox].sts_rdptr = 0;
+	spin_lock_init(&priv->omsg_ring[mbox].lock);
+
+	/* Outbound Msg Buffer allocation based on
+	   the number of maximum descriptor entries */
+	for (i = 0; i < entries; i++) {
+		priv->omsg_ring[mbox].omq_base[i] =
+			dma_alloc_coherent(
+				&priv->pdev->dev, TSI721_MSG_BUFFER_SIZE,
+				&priv->omsg_ring[mbox].omq_phys[i],
+				GFP_KERNEL);
+		if (priv->omsg_ring[mbox].omq_base[i] == NULL) {
+			dev_dbg(&priv->pdev->dev,
+				"Unable to allocate OB MSG data buffer for"
+				" MBOX%d\n", mbox);
+			rc = -ENOMEM;
+			goto out_buf;
+		}
+	}
+
+	/* Outbound message descriptor allocation */
+	priv->omsg_ring[mbox].omd_base = dma_alloc_coherent(
+				&priv->pdev->dev,
+				(entries + 1) * sizeof(struct tsi721_omsg_desc),
+				&priv->omsg_ring[mbox].omd_phys, GFP_KERNEL);
+	if (priv->omsg_ring[mbox].omd_base == NULL) {
+		dev_dbg(&priv->pdev->dev,
+			"Unable to allocate OB MSG descriptor memory "
+			"for MBOX%d\n", mbox);
+		rc = -ENOMEM;
+		goto out_buf;
+	}
+
+	priv->omsg_ring[mbox].tx_slot = 0;
+
+	/* Outbound message descriptor status FIFO allocation */
+	priv->omsg_ring[mbox].sts_size = roundup_pow_of_two(entries + 1);
+	priv->omsg_ring[mbox].sts_base = dma_zalloc_coherent(&priv->pdev->dev,
+			priv->omsg_ring[mbox].sts_size *
+						sizeof(struct tsi721_dma_sts),
+			&priv->omsg_ring[mbox].sts_phys, GFP_KERNEL);
+	if (priv->omsg_ring[mbox].sts_base == NULL) {
+		dev_dbg(&priv->pdev->dev,
+			"Unable to allocate OB MSG descriptor status FIFO "
+			"for MBOX%d\n", mbox);
+		rc = -ENOMEM;
+		goto out_desc;
+	}
+
+	/*
+	 * Configure Outbound Messaging Engine
+	 */
+
+	/* Setup Outbound Message descriptor pointer */
+	iowrite32(((u64)priv->omsg_ring[mbox].omd_phys >> 32),
+			priv->regs + TSI721_OBDMAC_DPTRH(mbox));
+	iowrite32(((u64)priv->omsg_ring[mbox].omd_phys &
+					TSI721_OBDMAC_DPTRL_MASK),
+			priv->regs + TSI721_OBDMAC_DPTRL(mbox));
+
+	/* Setup Outbound Message descriptor status FIFO */
+	iowrite32(((u64)priv->omsg_ring[mbox].sts_phys >> 32),
+			priv->regs + TSI721_OBDMAC_DSBH(mbox));
+	iowrite32(((u64)priv->omsg_ring[mbox].sts_phys &
+					TSI721_OBDMAC_DSBL_MASK),
+			priv->regs + TSI721_OBDMAC_DSBL(mbox));
+	iowrite32(TSI721_DMAC_DSSZ_SIZE(priv->omsg_ring[mbox].sts_size),
+		priv->regs + (u32)TSI721_OBDMAC_DSSZ(mbox));
+
+	/* Enable interrupts */
+
+#ifdef CONFIG_PCI_MSI
+	if (priv->flags & TSI721_USING_MSIX) {
+		/* Request interrupt service if we are in MSI-X mode */
+		rc = request_irq(
+			priv->msix[TSI721_VECT_OMB0_DONE + mbox].vector,
+			tsi721_omsg_msix, 0,
+			priv->msix[TSI721_VECT_OMB0_DONE + mbox].irq_name,
+			(void *)mport);
+
+		if (rc) {
+			dev_dbg(&priv->pdev->dev,
+				"Unable to allocate MSI-X interrupt for "
+				"OBOX%d-DONE\n", mbox);
+			goto out_stat;
+		}
+
+		rc = request_irq(priv->msix[TSI721_VECT_OMB0_INT + mbox].vector,
+			tsi721_omsg_msix, 0,
+			priv->msix[TSI721_VECT_OMB0_INT + mbox].irq_name,
+			(void *)mport);
+
+		if (rc)	{
+			dev_dbg(&priv->pdev->dev,
+				"Unable to allocate MSI-X interrupt for "
+				"MBOX%d-INT\n", mbox);
+			free_irq(
+				priv->msix[TSI721_VECT_OMB0_DONE + mbox].vector,
+				(void *)mport);
+			goto out_stat;
+		}
+	}
+#endif /* CONFIG_PCI_MSI */
+
+	tsi721_omsg_interrupt_enable(priv, mbox, TSI721_OBDMAC_INT_ALL);
+
+	/* Initialize Outbound Message descriptors ring */
+	bd_ptr = priv->omsg_ring[mbox].omd_base;
+	bd_ptr[entries].type_id = cpu_to_le32(DTYPE5 << 29);
+	bd_ptr[entries].msg_info = 0;
+	bd_ptr[entries].next_lo =
+		cpu_to_le32((u64)priv->omsg_ring[mbox].omd_phys &
+		TSI721_OBDMAC_DPTRL_MASK);
+	bd_ptr[entries].next_hi =
+		cpu_to_le32((u64)priv->omsg_ring[mbox].omd_phys >> 32);
+	priv->omsg_ring[mbox].wr_count = 0;
+	mb();
+
+	/* Initialize Outbound Message engine */
+	iowrite32(TSI721_OBDMAC_CTL_INIT, priv->regs + TSI721_OBDMAC_CTL(mbox));
+	ioread32(priv->regs + TSI721_OBDMAC_DWRCNT(mbox));
+	udelay(10);
+
+	priv->omsg_init[mbox] = 1;
+
+	return 0;
+
+#ifdef CONFIG_PCI_MSI
+out_stat:
+	dma_free_coherent(&priv->pdev->dev,
+		priv->omsg_ring[mbox].sts_size * sizeof(struct tsi721_dma_sts),
+		priv->omsg_ring[mbox].sts_base,
+		priv->omsg_ring[mbox].sts_phys);
+
+	priv->omsg_ring[mbox].sts_base = NULL;
+#endif /* CONFIG_PCI_MSI */
+
+out_desc:
+	dma_free_coherent(&priv->pdev->dev,
+		(entries + 1) * sizeof(struct tsi721_omsg_desc),
+		priv->omsg_ring[mbox].omd_base,
+		priv->omsg_ring[mbox].omd_phys);
+
+	priv->omsg_ring[mbox].omd_base = NULL;
+
+out_buf:
+	for (i = 0; i < priv->omsg_ring[mbox].size; i++) {
+		if (priv->omsg_ring[mbox].omq_base[i]) {
+			dma_free_coherent(&priv->pdev->dev,
+				TSI721_MSG_BUFFER_SIZE,
+				priv->omsg_ring[mbox].omq_base[i],
+				priv->omsg_ring[mbox].omq_phys[i]);
+
+			priv->omsg_ring[mbox].omq_base[i] = NULL;
+		}
+	}
+
+out:
+	return rc;
+}
+
+/**
+ * tsi721_close_outb_mbox - Close Tsi721 outbound mailbox
+ * @mport: Master port implementing the outbound message unit
+ * @mbox: Mailbox to close
+ */
+static void tsi721_close_outb_mbox(struct rio_mport *mport, int mbox)
+{
+	struct tsi721_device *priv = mport->priv;
+	u32 i;
+
+	if (!priv->omsg_init[mbox])
+		return;
+	priv->omsg_init[mbox] = 0;
+
+	/* Disable Interrupts */
+
+	tsi721_omsg_interrupt_disable(priv, mbox, TSI721_OBDMAC_INT_ALL);
+
+#ifdef CONFIG_PCI_MSI
+	if (priv->flags & TSI721_USING_MSIX) {
+		free_irq(priv->msix[TSI721_VECT_OMB0_DONE + mbox].vector,
+			 (void *)mport);
+		free_irq(priv->msix[TSI721_VECT_OMB0_INT + mbox].vector,
+			 (void *)mport);
+	}
+#endif /* CONFIG_PCI_MSI */
+
+	/* Free OMSG Descriptor Status FIFO */
+	dma_free_coherent(&priv->pdev->dev,
+		priv->omsg_ring[mbox].sts_size * sizeof(struct tsi721_dma_sts),
+		priv->omsg_ring[mbox].sts_base,
+		priv->omsg_ring[mbox].sts_phys);
+
+	priv->omsg_ring[mbox].sts_base = NULL;
+
+	/* Free OMSG descriptors */
+	dma_free_coherent(&priv->pdev->dev,
+		(priv->omsg_ring[mbox].size + 1) *
+			sizeof(struct tsi721_omsg_desc),
+		priv->omsg_ring[mbox].omd_base,
+		priv->omsg_ring[mbox].omd_phys);
+
+	priv->omsg_ring[mbox].omd_base = NULL;
+
+	/* Free message buffers */
+	for (i = 0; i < priv->omsg_ring[mbox].size; i++) {
+		if (priv->omsg_ring[mbox].omq_base[i]) {
+			dma_free_coherent(&priv->pdev->dev,
+				TSI721_MSG_BUFFER_SIZE,
+				priv->omsg_ring[mbox].omq_base[i],
+				priv->omsg_ring[mbox].omq_phys[i]);
+
+			priv->omsg_ring[mbox].omq_base[i] = NULL;
+		}
+	}
+}
+
+/**
+ * tsi721_imsg_handler - Inbound Message Interrupt Handler
+ * @priv: pointer to tsi721 private data
+ * @ch: inbound message channel number to service
+ *
+ * Services channel interrupts from inbound messaging engine.
+ */
+static void tsi721_imsg_handler(struct tsi721_device *priv, int ch)
+{
+	u32 mbox = ch - 4;
+	u32 imsg_int;
+
+	spin_lock(&priv->imsg_ring[mbox].lock);
+
+	imsg_int = ioread32(priv->regs + TSI721_IBDMAC_INT(ch));
+
+	if (imsg_int & TSI721_IBDMAC_INT_SRTO)
+		dev_info(&priv->pdev->dev, "IB MBOX%d SRIO timeout\n",
+			mbox);
+
+	if (imsg_int & TSI721_IBDMAC_INT_PC_ERROR)
+		dev_info(&priv->pdev->dev, "IB MBOX%d PCIe error\n",
+			mbox);
+
+	if (imsg_int & TSI721_IBDMAC_INT_FQ_LOW)
+		dev_info(&priv->pdev->dev,
+			"IB MBOX%d IB free queue low\n", mbox);
+
+	/* Clear IB channel interrupts */
+	iowrite32(imsg_int, priv->regs + TSI721_IBDMAC_INT(ch));
+
+	/* If an IB Msg is received notify the upper layer */
+	if (imsg_int & TSI721_IBDMAC_INT_DQ_RCV &&
+		priv->mport->inb_msg[mbox].mcback)
+		priv->mport->inb_msg[mbox].mcback(priv->mport,
+				priv->imsg_ring[mbox].dev_id, mbox, -1);
+
+	if (!(priv->flags & TSI721_USING_MSIX)) {
+		u32 ch_inte;
+
+		/* Re-enable channel interrupts */
+		ch_inte = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
+		ch_inte |= TSI721_INT_IMSG_CHAN(ch);
+		iowrite32(ch_inte, priv->regs + TSI721_DEV_CHAN_INTE);
+	}
+
+	spin_unlock(&priv->imsg_ring[mbox].lock);
+}
+
+/**
+ * tsi721_open_inb_mbox - Initialize Tsi721 inbound mailbox
+ * @mport: Master port implementing the Inbound Messaging Engine
+ * @dev_id: Device specific pointer to pass on event
+ * @mbox: Mailbox to open
+ * @entries: Number of entries in the inbound mailbox ring
+ */
+static int tsi721_open_inb_mbox(struct rio_mport *mport, void *dev_id,
+				int mbox, int entries)
+{
+	struct tsi721_device *priv = mport->priv;
+	int ch = mbox + 4;
+	int i;
+	u64 *free_ptr;
+	int rc = 0;
+
+	if ((entries < TSI721_IMSGD_MIN_RING_SIZE) ||
+	    (entries > TSI721_IMSGD_RING_SIZE) ||
+	    (!is_power_of_2(entries)) || mbox >= RIO_MAX_MBOX) {
+		rc = -EINVAL;
+		goto out;
+	}
+
+	/* Initialize IB Messaging Ring */
+	priv->imsg_ring[mbox].dev_id = dev_id;
+	priv->imsg_ring[mbox].size = entries;
+	priv->imsg_ring[mbox].rx_slot = 0;
+	priv->imsg_ring[mbox].desc_rdptr = 0;
+	priv->imsg_ring[mbox].fq_wrptr = 0;
+	for (i = 0; i < priv->imsg_ring[mbox].size; i++)
+		priv->imsg_ring[mbox].imq_base[i] = NULL;
+	spin_lock_init(&priv->imsg_ring[mbox].lock);
+
+	/* Allocate buffers for incoming messages */
+	priv->imsg_ring[mbox].buf_base =
+		dma_alloc_coherent(&priv->pdev->dev,
+				   entries * TSI721_MSG_BUFFER_SIZE,
+				   &priv->imsg_ring[mbox].buf_phys,
+				   GFP_KERNEL);
+
+	if (priv->imsg_ring[mbox].buf_base == NULL) {
+		dev_err(&priv->pdev->dev,
+			"Failed to allocate buffers for IB MBOX%d\n", mbox);
+		rc = -ENOMEM;
+		goto out;
+	}
+
+	/* Allocate memory for circular free list */
+	priv->imsg_ring[mbox].imfq_base =
+		dma_alloc_coherent(&priv->pdev->dev,
+				   entries * 8,
+				   &priv->imsg_ring[mbox].imfq_phys,
+				   GFP_KERNEL);
+
+	if (priv->imsg_ring[mbox].imfq_base == NULL) {
+		dev_err(&priv->pdev->dev,
+			"Failed to allocate free queue for IB MBOX%d\n", mbox);
+		rc = -ENOMEM;
+		goto out_buf;
+	}
+
+	/* Allocate memory for Inbound message descriptors */
+	priv->imsg_ring[mbox].imd_base =
+		dma_alloc_coherent(&priv->pdev->dev,
+				   entries * sizeof(struct tsi721_imsg_desc),
+				   &priv->imsg_ring[mbox].imd_phys, GFP_KERNEL);
+
+	if (priv->imsg_ring[mbox].imd_base == NULL) {
+		dev_err(&priv->pdev->dev,
+			"Failed to allocate descriptor memory for IB MBOX%d\n",
+			mbox);
+		rc = -ENOMEM;
+		goto out_dma;
+	}
+
+	/* Fill free buffer pointer list */
+	free_ptr = priv->imsg_ring[mbox].imfq_base;
+	for (i = 0; i < entries; i++)
+		free_ptr[i] = cpu_to_le64(
+				(u64)(priv->imsg_ring[mbox].buf_phys) +
+				i * 0x1000);
+
+	mb();
+
+	/*
+	 * For mapping of inbound SRIO Messages into appropriate queues we need
+	 * to set Inbound Device ID register in the messaging engine. We do it
+	 * once when first inbound mailbox is requested.
+	 */
+	if (!(priv->flags & TSI721_IMSGID_SET)) {
+		iowrite32((u32)priv->mport->host_deviceid,
+			priv->regs + TSI721_IB_DEVID);
+		priv->flags |= TSI721_IMSGID_SET;
+	}
+
+	/*
+	 * Configure Inbound Messaging channel (ch = mbox + 4)
+	 */
+
+	/* Setup Inbound Message free queue */
+	iowrite32(((u64)priv->imsg_ring[mbox].imfq_phys >> 32),
+		priv->regs + TSI721_IBDMAC_FQBH(ch));
+	iowrite32(((u64)priv->imsg_ring[mbox].imfq_phys &
+			TSI721_IBDMAC_FQBL_MASK),
+		priv->regs+TSI721_IBDMAC_FQBL(ch));
+	iowrite32(TSI721_DMAC_DSSZ_SIZE(entries),
+		priv->regs + TSI721_IBDMAC_FQSZ(ch));
+
+	/* Setup Inbound Message descriptor queue */
+	iowrite32(((u64)priv->imsg_ring[mbox].imd_phys >> 32),
+		priv->regs + TSI721_IBDMAC_DQBH(ch));
+	iowrite32(((u32)priv->imsg_ring[mbox].imd_phys &
+		   (u32)TSI721_IBDMAC_DQBL_MASK),
+		priv->regs+TSI721_IBDMAC_DQBL(ch));
+	iowrite32(TSI721_DMAC_DSSZ_SIZE(entries),
+		priv->regs + TSI721_IBDMAC_DQSZ(ch));
+
+	/* Enable interrupts */
+
+#ifdef CONFIG_PCI_MSI
+	if (priv->flags & TSI721_USING_MSIX) {
+		/* Request interrupt service if we are in MSI-X mode */
+		rc = request_irq(priv->msix[TSI721_VECT_IMB0_RCV + mbox].vector,
+			tsi721_imsg_msix, 0,
+			priv->msix[TSI721_VECT_IMB0_RCV + mbox].irq_name,
+			(void *)mport);
+
+		if (rc) {
+			dev_dbg(&priv->pdev->dev,
+				"Unable to allocate MSI-X interrupt for "
+				"IBOX%d-DONE\n", mbox);
+			goto out_desc;
+		}
+
+		rc = request_irq(priv->msix[TSI721_VECT_IMB0_INT + mbox].vector,
+			tsi721_imsg_msix, 0,
+			priv->msix[TSI721_VECT_IMB0_INT + mbox].irq_name,
+			(void *)mport);
+
+		if (rc)	{
+			dev_dbg(&priv->pdev->dev,
+				"Unable to allocate MSI-X interrupt for "
+				"IBOX%d-INT\n", mbox);
+			free_irq(
+				priv->msix[TSI721_VECT_IMB0_RCV + mbox].vector,
+				(void *)mport);
+			goto out_desc;
+		}
+	}
+#endif /* CONFIG_PCI_MSI */
+
+	tsi721_imsg_interrupt_enable(priv, ch, TSI721_IBDMAC_INT_ALL);
+
+	/* Initialize Inbound Message Engine */
+	iowrite32(TSI721_IBDMAC_CTL_INIT, priv->regs + TSI721_IBDMAC_CTL(ch));
+	ioread32(priv->regs + TSI721_IBDMAC_CTL(ch));
+	udelay(10);
+	priv->imsg_ring[mbox].fq_wrptr = entries - 1;
+	iowrite32(entries - 1, priv->regs + TSI721_IBDMAC_FQWP(ch));
+
+	priv->imsg_init[mbox] = 1;
+	return 0;
+
+#ifdef CONFIG_PCI_MSI
+out_desc:
+	dma_free_coherent(&priv->pdev->dev,
+		priv->imsg_ring[mbox].size * sizeof(struct tsi721_imsg_desc),
+		priv->imsg_ring[mbox].imd_base,
+		priv->imsg_ring[mbox].imd_phys);
+
+	priv->imsg_ring[mbox].imd_base = NULL;
+#endif /* CONFIG_PCI_MSI */
+
+out_dma:
+	dma_free_coherent(&priv->pdev->dev,
+		priv->imsg_ring[mbox].size * 8,
+		priv->imsg_ring[mbox].imfq_base,
+		priv->imsg_ring[mbox].imfq_phys);
+
+	priv->imsg_ring[mbox].imfq_base = NULL;
+
+out_buf:
+	dma_free_coherent(&priv->pdev->dev,
+		priv->imsg_ring[mbox].size * TSI721_MSG_BUFFER_SIZE,
+		priv->imsg_ring[mbox].buf_base,
+		priv->imsg_ring[mbox].buf_phys);
+
+	priv->imsg_ring[mbox].buf_base = NULL;
+
+out:
+	return rc;
+}
+
+/**
+ * tsi721_close_inb_mbox - Shut down Tsi721 inbound mailbox
+ * @mport: Master port implementing the Inbound Messaging Engine
+ * @mbox: Mailbox to close
+ */
+static void tsi721_close_inb_mbox(struct rio_mport *mport, int mbox)
+{
+	struct tsi721_device *priv = mport->priv;
+	u32 rx_slot;
+	int ch = mbox + 4;
+
+	if (!priv->imsg_init[mbox]) /* mbox isn't initialized yet */
+		return;
+	priv->imsg_init[mbox] = 0;
+
+	/* Disable Inbound Messaging Engine */
+
+	/* Disable Interrupts */
+	tsi721_imsg_interrupt_disable(priv, ch, TSI721_OBDMAC_INT_MASK);
+
+#ifdef CONFIG_PCI_MSI
+	if (priv->flags & TSI721_USING_MSIX) {
+		free_irq(priv->msix[TSI721_VECT_IMB0_RCV + mbox].vector,
+				(void *)mport);
+		free_irq(priv->msix[TSI721_VECT_IMB0_INT + mbox].vector,
+				(void *)mport);
+	}
+#endif /* CONFIG_PCI_MSI */
+
+	/* Clear Inbound Buffer Queue */
+	for (rx_slot = 0; rx_slot < priv->imsg_ring[mbox].size; rx_slot++)
+		priv->imsg_ring[mbox].imq_base[rx_slot] = NULL;
+
+	/* Free memory allocated for message buffers */
+	dma_free_coherent(&priv->pdev->dev,
+		priv->imsg_ring[mbox].size * TSI721_MSG_BUFFER_SIZE,
+		priv->imsg_ring[mbox].buf_base,
+		priv->imsg_ring[mbox].buf_phys);
+
+	priv->imsg_ring[mbox].buf_base = NULL;
+
+	/* Free memory allocated for free pointr list */
+	dma_free_coherent(&priv->pdev->dev,
+		priv->imsg_ring[mbox].size * 8,
+		priv->imsg_ring[mbox].imfq_base,
+		priv->imsg_ring[mbox].imfq_phys);
+
+	priv->imsg_ring[mbox].imfq_base = NULL;
+
+	/* Free memory allocated for RX descriptors */
+	dma_free_coherent(&priv->pdev->dev,
+		priv->imsg_ring[mbox].size * sizeof(struct tsi721_imsg_desc),
+		priv->imsg_ring[mbox].imd_base,
+		priv->imsg_ring[mbox].imd_phys);
+
+	priv->imsg_ring[mbox].imd_base = NULL;
+}
+
+/**
+ * tsi721_add_inb_buffer - Add buffer to the Tsi721 inbound message queue
+ * @mport: Master port implementing the Inbound Messaging Engine
+ * @mbox: Inbound mailbox number
+ * @buf: Buffer to add to inbound queue
+ */
+static int tsi721_add_inb_buffer(struct rio_mport *mport, int mbox, void *buf)
+{
+	struct tsi721_device *priv = mport->priv;
+	u32 rx_slot;
+	int rc = 0;
+
+	rx_slot = priv->imsg_ring[mbox].rx_slot;
+	if (priv->imsg_ring[mbox].imq_base[rx_slot]) {
+		dev_err(&priv->pdev->dev,
+			"Error adding inbound buffer %d, buffer exists\n",
+			rx_slot);
+		rc = -EINVAL;
+		goto out;
+	}
+
+	priv->imsg_ring[mbox].imq_base[rx_slot] = buf;
+
+	if (++priv->imsg_ring[mbox].rx_slot == priv->imsg_ring[mbox].size)
+		priv->imsg_ring[mbox].rx_slot = 0;
+
+out:
+	return rc;
+}
+
+/**
+ * tsi721_get_inb_message - Fetch inbound message from the Tsi721 MSG Queue
+ * @mport: Master port implementing the Inbound Messaging Engine
+ * @mbox: Inbound mailbox number
+ *
+ * Returns pointer to the message on success or NULL on failure.
+ */
+static void *tsi721_get_inb_message(struct rio_mport *mport, int mbox)
+{
+	struct tsi721_device *priv = mport->priv;
+	struct tsi721_imsg_desc *desc;
+	u32 rx_slot;
+	void *rx_virt = NULL;
+	u64 rx_phys;
+	void *buf = NULL;
+	u64 *free_ptr;
+	int ch = mbox + 4;
+	int msg_size;
+
+	if (!priv->imsg_init[mbox])
+		return NULL;
+
+	desc = priv->imsg_ring[mbox].imd_base;
+	desc += priv->imsg_ring[mbox].desc_rdptr;
+
+	if (!(le32_to_cpu(desc->msg_info) & TSI721_IMD_HO))
+		goto out;
+
+	rx_slot = priv->imsg_ring[mbox].rx_slot;
+	while (priv->imsg_ring[mbox].imq_base[rx_slot] == NULL) {
+		if (++rx_slot == priv->imsg_ring[mbox].size)
+			rx_slot = 0;
+	}
+
+	rx_phys = ((u64)le32_to_cpu(desc->bufptr_hi) << 32) |
+			le32_to_cpu(desc->bufptr_lo);
+
+	rx_virt = priv->imsg_ring[mbox].buf_base +
+		  (rx_phys - (u64)priv->imsg_ring[mbox].buf_phys);
+
+	buf = priv->imsg_ring[mbox].imq_base[rx_slot];
+	msg_size = le32_to_cpu(desc->msg_info) & TSI721_IMD_BCOUNT;
+	if (msg_size == 0)
+		msg_size = RIO_MAX_MSG_SIZE;
+
+	memcpy(buf, rx_virt, msg_size);
+	priv->imsg_ring[mbox].imq_base[rx_slot] = NULL;
+
+	desc->msg_info &= cpu_to_le32(~TSI721_IMD_HO);
+	if (++priv->imsg_ring[mbox].desc_rdptr == priv->imsg_ring[mbox].size)
+		priv->imsg_ring[mbox].desc_rdptr = 0;
+
+	iowrite32(priv->imsg_ring[mbox].desc_rdptr,
+		priv->regs + TSI721_IBDMAC_DQRP(ch));
+
+	/* Return free buffer into the pointer list */
+	free_ptr = priv->imsg_ring[mbox].imfq_base;
+	free_ptr[priv->imsg_ring[mbox].fq_wrptr] = cpu_to_le64(rx_phys);
+
+	if (++priv->imsg_ring[mbox].fq_wrptr == priv->imsg_ring[mbox].size)
+		priv->imsg_ring[mbox].fq_wrptr = 0;
+
+	iowrite32(priv->imsg_ring[mbox].fq_wrptr,
+		priv->regs + TSI721_IBDMAC_FQWP(ch));
+out:
+	return buf;
+}
+
+/**
+ * tsi721_messages_init - Initialization of Messaging Engine
+ * @priv: pointer to tsi721 private data
+ *
+ * Configures Tsi721 messaging engine.
+ */
+static int tsi721_messages_init(struct tsi721_device *priv)
+{
+	int	ch;
+
+	iowrite32(0, priv->regs + TSI721_SMSG_ECC_LOG);
+	iowrite32(0, priv->regs + TSI721_RETRY_GEN_CNT);
+	iowrite32(0, priv->regs + TSI721_RETRY_RX_CNT);
+
+	/* Set SRIO Message Request/Response Timeout */
+	iowrite32(TSI721_RQRPTO_VAL, priv->regs + TSI721_RQRPTO);
+
+	/* Initialize Inbound Messaging Engine Registers */
+	for (ch = 0; ch < TSI721_IMSG_CHNUM; ch++) {
+		/* Clear interrupt bits */
+		iowrite32(TSI721_IBDMAC_INT_MASK,
+			priv->regs + TSI721_IBDMAC_INT(ch));
+		/* Clear Status */
+		iowrite32(0, priv->regs + TSI721_IBDMAC_STS(ch));
+
+		iowrite32(TSI721_SMSG_ECC_COR_LOG_MASK,
+				priv->regs + TSI721_SMSG_ECC_COR_LOG(ch));
+		iowrite32(TSI721_SMSG_ECC_NCOR_MASK,
+				priv->regs + TSI721_SMSG_ECC_NCOR(ch));
+	}
+
+	return 0;
+}
+
+/**
+ * tsi721_disable_ints - disables all device interrupts
+ * @priv: pointer to tsi721 private data
+ */
+static void tsi721_disable_ints(struct tsi721_device *priv)
+{
+	int ch;
+
+	/* Disable all device level interrupts */
+	iowrite32(0, priv->regs + TSI721_DEV_INTE);
+
+	/* Disable all Device Channel interrupts */
+	iowrite32(0, priv->regs + TSI721_DEV_CHAN_INTE);
+
+	/* Disable all Inbound Msg Channel interrupts */
+	for (ch = 0; ch < TSI721_IMSG_CHNUM; ch++)
+		iowrite32(0, priv->regs + TSI721_IBDMAC_INTE(ch));
+
+	/* Disable all Outbound Msg Channel interrupts */
+	for (ch = 0; ch < TSI721_OMSG_CHNUM; ch++)
+		iowrite32(0, priv->regs + TSI721_OBDMAC_INTE(ch));
+
+	/* Disable all general messaging interrupts */
+	iowrite32(0, priv->regs + TSI721_SMSG_INTE);
+
+	/* Disable all BDMA Channel interrupts */
+	for (ch = 0; ch < TSI721_DMA_MAXCH; ch++)
+		iowrite32(0,
+			priv->regs + TSI721_DMAC_BASE(ch) + TSI721_DMAC_INTE);
+
+	/* Disable all general BDMA interrupts */
+	iowrite32(0, priv->regs + TSI721_BDMA_INTE);
+
+	/* Disable all SRIO Channel interrupts */
+	for (ch = 0; ch < TSI721_SRIO_MAXCH; ch++)
+		iowrite32(0, priv->regs + TSI721_SR_CHINTE(ch));
+
+	/* Disable all general SR2PC interrupts */
+	iowrite32(0, priv->regs + TSI721_SR2PC_GEN_INTE);
+
+	/* Disable all PC2SR interrupts */
+	iowrite32(0, priv->regs + TSI721_PC2SR_INTE);
+
+	/* Disable all I2C interrupts */
+	iowrite32(0, priv->regs + TSI721_I2C_INT_ENABLE);
+
+	/* Disable SRIO MAC interrupts */
+	iowrite32(0, priv->regs + TSI721_RIO_EM_INT_ENABLE);
+	iowrite32(0, priv->regs + TSI721_RIO_EM_DEV_INT_EN);
+}
+
+/**
+ * tsi721_setup_mport - Setup Tsi721 as RapidIO subsystem master port
+ * @priv: pointer to tsi721 private data
+ *
+ * Configures Tsi721 as RapidIO master port.
+ */
+static int tsi721_setup_mport(struct tsi721_device *priv)
+{
+	struct pci_dev *pdev = priv->pdev;
+	int err = 0;
+	struct rio_ops *ops;
+
+	struct rio_mport *mport;
+
+	ops = kzalloc(sizeof(struct rio_ops), GFP_KERNEL);
+	if (!ops) {
+		dev_dbg(&pdev->dev, "Unable to allocate memory for rio_ops\n");
+		return -ENOMEM;
+	}
+
+	ops->lcread = tsi721_lcread;
+	ops->lcwrite = tsi721_lcwrite;
+	ops->cread = tsi721_cread_dma;
+	ops->cwrite = tsi721_cwrite_dma;
+	ops->dsend = tsi721_dsend;
+	ops->open_inb_mbox = tsi721_open_inb_mbox;
+	ops->close_inb_mbox = tsi721_close_inb_mbox;
+	ops->open_outb_mbox = tsi721_open_outb_mbox;
+	ops->close_outb_mbox = tsi721_close_outb_mbox;
+	ops->add_outb_message = tsi721_add_outb_message;
+	ops->add_inb_buffer = tsi721_add_inb_buffer;
+	ops->get_inb_message = tsi721_get_inb_message;
+	ops->map_inb = tsi721_rio_map_inb_mem;
+	ops->unmap_inb = tsi721_rio_unmap_inb_mem;
+
+	mport = kzalloc(sizeof(struct rio_mport), GFP_KERNEL);
+	if (!mport) {
+		kfree(ops);
+		dev_dbg(&pdev->dev, "Unable to allocate memory for mport\n");
+		return -ENOMEM;
+	}
+
+	mport->ops = ops;
+	mport->index = 0;
+	mport->sys_size = 0; /* small system */
+	mport->phy_type = RIO_PHY_SERIAL;
+	mport->priv = (void *)priv;
+	mport->phys_efptr = 0x100;
+	mport->dev.parent = &pdev->dev;
+	priv->mport = mport;
+
+	INIT_LIST_HEAD(&mport->dbells);
+
+	rio_init_dbell_res(&mport->riores[RIO_DOORBELL_RESOURCE], 0, 0xffff);
+	rio_init_mbox_res(&mport->riores[RIO_INB_MBOX_RESOURCE], 0, 3);
+	rio_init_mbox_res(&mport->riores[RIO_OUTB_MBOX_RESOURCE], 0, 3);
+	snprintf(mport->name, RIO_MAX_MPORT_NAME, "%s(%s)",
+		 dev_driver_string(&pdev->dev), dev_name(&pdev->dev));
+
+	/* Hook up interrupt handler */
+
+#ifdef CONFIG_PCI_MSI
+	if (!tsi721_enable_msix(priv))
+		priv->flags |= TSI721_USING_MSIX;
+	else if (!pci_enable_msi(pdev))
+		priv->flags |= TSI721_USING_MSI;
+	else
+		dev_info(&pdev->dev,
+			 "MSI/MSI-X is not available. Using legacy INTx.\n");
+#endif /* CONFIG_PCI_MSI */
+
+	err = tsi721_request_irq(mport);
+
+	if (!err) {
+		tsi721_interrupts_init(priv);
+		ops->pwenable = tsi721_pw_enable;
+	} else {
+		dev_err(&pdev->dev, "Unable to get assigned PCI IRQ "
+			"vector %02X err=0x%x\n", pdev->irq, err);
+		goto err_exit;
+	}
+
+#ifdef CONFIG_RAPIDIO_DMA_ENGINE
+	tsi721_register_dma(priv);
+#endif
+	/* Enable SRIO link */
+	iowrite32(ioread32(priv->regs + TSI721_DEVCTL) |
+		  TSI721_DEVCTL_SRBOOT_CMPL,
+		  priv->regs + TSI721_DEVCTL);
+
+	rio_register_mport(mport);
+
+	if (mport->host_deviceid >= 0)
+		iowrite32(RIO_PORT_GEN_HOST | RIO_PORT_GEN_MASTER |
+			  RIO_PORT_GEN_DISCOVERED,
+			  priv->regs + (0x100 + RIO_PORT_GEN_CTL_CSR));
+	else
+		iowrite32(0, priv->regs + (0x100 + RIO_PORT_GEN_CTL_CSR));
+
+	return 0;
+
+err_exit:
+	kfree(mport);
+	kfree(ops);
+	return err;
+}
+
+static int tsi721_probe(struct pci_dev *pdev,
+				  const struct pci_device_id *id)
+{
+	struct tsi721_device *priv;
+	int err;
+
+	priv = kzalloc(sizeof(struct tsi721_device), GFP_KERNEL);
+	if (priv == NULL) {
+		dev_err(&pdev->dev, "Failed to allocate memory for device\n");
+		err = -ENOMEM;
+		goto err_exit;
+	}
+
+	err = pci_enable_device(pdev);
+	if (err) {
+		dev_err(&pdev->dev, "Failed to enable PCI device\n");
+		goto err_clean;
+	}
+
+	priv->pdev = pdev;
+
+#ifdef DEBUG
+	{
+	int i;
+	for (i = 0; i <= PCI_STD_RESOURCE_END; i++) {
+		dev_dbg(&pdev->dev, "res[%d] @ 0x%llx (0x%lx, 0x%lx)\n",
+			i, (unsigned long long)pci_resource_start(pdev, i),
+			(unsigned long)pci_resource_len(pdev, i),
+			pci_resource_flags(pdev, i));
+	}
+	}
+#endif
+	/*
+	 * Verify BAR configuration
+	 */
+
+	/* BAR_0 (registers) must be 512KB+ in 32-bit address space */
+	if (!(pci_resource_flags(pdev, BAR_0) & IORESOURCE_MEM) ||
+	    pci_resource_flags(pdev, BAR_0) & IORESOURCE_MEM_64 ||
+	    pci_resource_len(pdev, BAR_0) < TSI721_REG_SPACE_SIZE) {
+		dev_err(&pdev->dev,
+			"Missing or misconfigured CSR BAR0, aborting.\n");
+		err = -ENODEV;
+		goto err_disable_pdev;
+	}
+
+	/* BAR_1 (outbound doorbells) must be 16MB+ in 32-bit address space */
+	if (!(pci_resource_flags(pdev, BAR_1) & IORESOURCE_MEM) ||
+	    pci_resource_flags(pdev, BAR_1) & IORESOURCE_MEM_64 ||
+	    pci_resource_len(pdev, BAR_1) < TSI721_DB_WIN_SIZE) {
+		dev_err(&pdev->dev,
+			"Missing or misconfigured Doorbell BAR1, aborting.\n");
+		err = -ENODEV;
+		goto err_disable_pdev;
+	}
+
+	/*
+	 * BAR_2 and BAR_4 (outbound translation) must be in 64-bit PCIe address
+	 * space.
+	 * NOTE: BAR_2 and BAR_4 are not used by this version of driver.
+	 * It may be a good idea to keep them disabled using HW configuration
+	 * to save PCI memory space.
+	 */
+	if ((pci_resource_flags(pdev, BAR_2) & IORESOURCE_MEM) &&
+	    (pci_resource_flags(pdev, BAR_2) & IORESOURCE_MEM_64)) {
+		dev_info(&pdev->dev, "Outbound BAR2 is not used but enabled.\n");
+	}
+
+	if ((pci_resource_flags(pdev, BAR_4) & IORESOURCE_MEM) &&
+	    (pci_resource_flags(pdev, BAR_4) & IORESOURCE_MEM_64)) {
+		dev_info(&pdev->dev, "Outbound BAR4 is not used but enabled.\n");
+	}
+
+	err = pci_request_regions(pdev, DRV_NAME);
+	if (err) {
+		dev_err(&pdev->dev, "Cannot obtain PCI resources, "
+			"aborting.\n");
+		goto err_disable_pdev;
+	}
+
+	pci_set_master(pdev);
+
+	priv->regs = pci_ioremap_bar(pdev, BAR_0);
+	if (!priv->regs) {
+		dev_err(&pdev->dev,
+			"Unable to map device registers space, aborting\n");
+		err = -ENOMEM;
+		goto err_free_res;
+	}
+
+	priv->odb_base = pci_ioremap_bar(pdev, BAR_1);
+	if (!priv->odb_base) {
+		dev_err(&pdev->dev,
+			"Unable to map outbound doorbells space, aborting\n");
+		err = -ENOMEM;
+		goto err_unmap_bars;
+	}
+
+	/* Configure DMA attributes. */
+	if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
+		err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+		if (err) {
+			dev_info(&pdev->dev, "Unable to set DMA mask\n");
+			goto err_unmap_bars;
+		}
+
+		if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)))
+			dev_info(&pdev->dev, "Unable to set consistent DMA mask\n");
+	} else {
+		err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
+		if (err)
+			dev_info(&pdev->dev, "Unable to set consistent DMA mask\n");
+	}
+
+	BUG_ON(!pci_is_pcie(pdev));
+
+	/* Clear "no snoop" and "relaxed ordering" bits, use default MRRS. */
+	pcie_capability_clear_and_set_word(pdev, PCI_EXP_DEVCTL,
+		PCI_EXP_DEVCTL_READRQ | PCI_EXP_DEVCTL_RELAX_EN |
+		PCI_EXP_DEVCTL_NOSNOOP_EN,
+		PCI_EXP_DEVCTL_READRQ_512B);
+
+	/* Adjust PCIe completion timeout. */
+	pcie_capability_clear_and_set_word(pdev, PCI_EXP_DEVCTL2, 0xf, 0x2);
+
+	/*
+	 * FIXUP: correct offsets of MSI-X tables in the MSI-X Capability Block
+	 */
+	pci_write_config_dword(pdev, TSI721_PCIECFG_EPCTL, 0x01);
+	pci_write_config_dword(pdev, TSI721_PCIECFG_MSIXTBL,
+						TSI721_MSIXTBL_OFFSET);
+	pci_write_config_dword(pdev, TSI721_PCIECFG_MSIXPBA,
+						TSI721_MSIXPBA_OFFSET);
+	pci_write_config_dword(pdev, TSI721_PCIECFG_EPCTL, 0);
+	/* End of FIXUP */
+
+	tsi721_disable_ints(priv);
+
+	tsi721_init_pc2sr_mapping(priv);
+	tsi721_init_sr2pc_mapping(priv);
+
+	if (tsi721_bdma_maint_init(priv)) {
+		dev_err(&pdev->dev, "BDMA initialization failed, aborting\n");
+		err = -ENOMEM;
+		goto err_unmap_bars;
+	}
+
+	err = tsi721_doorbell_init(priv);
+	if (err)
+		goto err_free_bdma;
+
+	tsi721_port_write_init(priv);
+
+	err = tsi721_messages_init(priv);
+	if (err)
+		goto err_free_consistent;
+
+	err = tsi721_setup_mport(priv);
+	if (err)
+		goto err_free_consistent;
+
+	return 0;
+
+err_free_consistent:
+	tsi721_doorbell_free(priv);
+err_free_bdma:
+	tsi721_bdma_maint_free(priv);
+err_unmap_bars:
+	if (priv->regs)
+		iounmap(priv->regs);
+	if (priv->odb_base)
+		iounmap(priv->odb_base);
+err_free_res:
+	pci_release_regions(pdev);
+	pci_clear_master(pdev);
+err_disable_pdev:
+	pci_disable_device(pdev);
+err_clean:
+	kfree(priv);
+err_exit:
+	return err;
+}
+
+static const struct pci_device_id tsi721_pci_tbl[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_IDT, PCI_DEVICE_ID_TSI721) },
+	{ 0, }	/* terminate list */
+};
+
+MODULE_DEVICE_TABLE(pci, tsi721_pci_tbl);
+
+static struct pci_driver tsi721_driver = {
+	.name		= "tsi721",
+	.id_table	= tsi721_pci_tbl,
+	.probe		= tsi721_probe,
+};
+
+static int __init tsi721_init(void)
+{
+	return pci_register_driver(&tsi721_driver);
+}
+
+device_initcall(tsi721_init);
+
+MODULE_DESCRIPTION("IDT Tsi721 PCIExpress-to-SRIO bridge driver");
+MODULE_AUTHOR("Integrated Device Technology, Inc.");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/rapidio/devices/tsi721.h b/kernel/drivers/rapidio/devices/tsi721.h
new file mode 100644
index 000000000..9d2502543
--- /dev/null
+++ b/kernel/drivers/rapidio/devices/tsi721.h
@@ -0,0 +1,853 @@
+/*
+ * Tsi721 PCIExpress-to-SRIO bridge definitions
+ *
+ * Copyright 2011, Integrated Device Technology, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#ifndef __TSI721_H
+#define __TSI721_H
+
+#define DRV_NAME	"tsi721"
+
+#define DEFAULT_HOPCOUNT	0xff
+#define DEFAULT_DESTID		0xff
+
+/* PCI device ID */
+#define PCI_DEVICE_ID_TSI721		0x80ab
+
+#define BAR_0	0
+#define BAR_1	1
+#define BAR_2	2
+#define BAR_4	4
+
+#define TSI721_PC2SR_BARS	2
+#define TSI721_PC2SR_WINS	8
+#define TSI721_PC2SR_ZONES	8
+#define TSI721_MAINT_WIN	0 /* Window for outbound maintenance requests */
+#define IDB_QUEUE		0 /* Inbound Doorbell Queue to use */
+#define IDB_QSIZE		512 /* Inbound Doorbell Queue size */
+
+/* Memory space sizes */
+#define TSI721_REG_SPACE_SIZE		(512 * 1024) /* 512K */
+#define TSI721_DB_WIN_SIZE		(16 * 1024 * 1024) /* 16MB */
+
+#define  RIO_TT_CODE_8		0x00000000
+#define  RIO_TT_CODE_16		0x00000001
+
+#define TSI721_DMA_MAXCH	8
+#define TSI721_DMA_MINSTSSZ	32
+#define TSI721_DMA_STSBLKSZ	8
+
+#define TSI721_SRIO_MAXCH	8
+
+#define DBELL_SID(buf)		(((u8)buf[2] << 8) | (u8)buf[3])
+#define DBELL_TID(buf)		(((u8)buf[4] << 8) | (u8)buf[5])
+#define DBELL_INF(buf)		(((u8)buf[0] << 8) | (u8)buf[1])
+
+#define TSI721_RIO_PW_MSG_SIZE	16  /* Tsi721 saves only 16 bytes of PW msg */
+
+/* Register definitions */
+
+/*
+ * Registers in PCIe configuration space
+ */
+
+#define TSI721_PCIECFG_MSIXTBL	0x0a4
+#define TSI721_MSIXTBL_OFFSET	0x2c000
+#define TSI721_PCIECFG_MSIXPBA	0x0a8
+#define TSI721_MSIXPBA_OFFSET	0x2a000
+#define TSI721_PCIECFG_EPCTL	0x400
+
+/*
+ * Event Management Registers
+ */
+
+#define TSI721_RIO_EM_INT_STAT		0x10910
+#define TSI721_RIO_EM_INT_STAT_PW_RX	0x00010000
+
+#define TSI721_RIO_EM_INT_ENABLE	0x10914
+#define TSI721_RIO_EM_INT_ENABLE_PW_RX	0x00010000
+
+#define TSI721_RIO_EM_DEV_INT_EN	0x10930
+#define TSI721_RIO_EM_DEV_INT_EN_INT	0x00000001
+
+/*
+ * Port-Write Block Registers
+ */
+
+#define TSI721_RIO_PW_CTL		0x10a04
+#define TSI721_RIO_PW_CTL_PW_TIMER	0xf0000000
+#define TSI721_RIO_PW_CTL_PWT_DIS	(0 << 28)
+#define TSI721_RIO_PW_CTL_PWT_103	(1 << 28)
+#define TSI721_RIO_PW_CTL_PWT_205	(1 << 29)
+#define TSI721_RIO_PW_CTL_PWT_410	(1 << 30)
+#define TSI721_RIO_PW_CTL_PWT_820	(1 << 31)
+#define TSI721_RIO_PW_CTL_PWC_MODE	0x01000000
+#define TSI721_RIO_PW_CTL_PWC_CONT	0x00000000
+#define TSI721_RIO_PW_CTL_PWC_REL	0x01000000
+
+#define TSI721_RIO_PW_RX_STAT		0x10a10
+#define TSI721_RIO_PW_RX_STAT_WR_SIZE	0x0000f000
+#define TSI_RIO_PW_RX_STAT_WDPTR	0x00000100
+#define TSI721_RIO_PW_RX_STAT_PW_SHORT	0x00000008
+#define TSI721_RIO_PW_RX_STAT_PW_TRUNC	0x00000004
+#define TSI721_RIO_PW_RX_STAT_PW_DISC	0x00000002
+#define TSI721_RIO_PW_RX_STAT_PW_VAL	0x00000001
+
+#define TSI721_RIO_PW_RX_CAPT(x)	(0x10a20 + (x)*4)
+
+/*
+ * Inbound Doorbells
+ */
+
+#define TSI721_IDB_ENTRY_SIZE	64
+
+#define TSI721_IDQ_CTL(x)	(0x20000 + (x) * 0x1000)
+#define TSI721_IDQ_SUSPEND	0x00000002
+#define TSI721_IDQ_INIT		0x00000001
+
+#define TSI721_IDQ_STS(x)	(0x20004 + (x) * 0x1000)
+#define TSI721_IDQ_RUN		0x00200000
+
+#define TSI721_IDQ_MASK(x)	(0x20008 + (x) * 0x1000)
+#define TSI721_IDQ_MASK_MASK	0xffff0000
+#define TSI721_IDQ_MASK_PATT	0x0000ffff
+
+#define TSI721_IDQ_RP(x)	(0x2000c + (x) * 0x1000)
+#define TSI721_IDQ_RP_PTR	0x0007ffff
+
+#define TSI721_IDQ_WP(x)	(0x20010 + (x) * 0x1000)
+#define TSI721_IDQ_WP_PTR	0x0007ffff
+
+#define TSI721_IDQ_BASEL(x)	(0x20014 + (x) * 0x1000)
+#define TSI721_IDQ_BASEL_ADDR	0xffffffc0
+#define TSI721_IDQ_BASEU(x)	(0x20018 + (x) * 0x1000)
+#define TSI721_IDQ_SIZE(x)	(0x2001c + (x) * 0x1000)
+#define TSI721_IDQ_SIZE_VAL(size)	(__fls(size) - 4)
+#define TSI721_IDQ_SIZE_MIN	512
+#define TSI721_IDQ_SIZE_MAX	(512 * 1024)
+
+#define TSI721_SR_CHINT(x)	(0x20040 + (x) * 0x1000)
+#define TSI721_SR_CHINTE(x)	(0x20044 + (x) * 0x1000)
+#define TSI721_SR_CHINTSET(x)	(0x20048 + (x) * 0x1000)
+#define TSI721_SR_CHINT_ODBOK	0x00000020
+#define TSI721_SR_CHINT_IDBQRCV	0x00000010
+#define TSI721_SR_CHINT_SUSP	0x00000008
+#define TSI721_SR_CHINT_ODBTO	0x00000004
+#define TSI721_SR_CHINT_ODBRTRY	0x00000002
+#define TSI721_SR_CHINT_ODBERR	0x00000001
+#define TSI721_SR_CHINT_ALL	0x0000003f
+
+#define TSI721_IBWIN_NUM	8
+
+#define TSI721_IBWIN_LB(x)	(0x29000 + (x) * 0x20)
+#define TSI721_IBWIN_LB_BA	0xfffff000
+#define TSI721_IBWIN_LB_WEN	0x00000001
+
+#define TSI721_IBWIN_UB(x)	(0x29004 + (x) * 0x20)
+#define TSI721_IBWIN_SZ(x)	(0x29008 + (x) * 0x20)
+#define TSI721_IBWIN_SZ_SIZE	0x00001f00
+#define TSI721_IBWIN_SIZE(size)	(__fls(size) - 12)
+
+#define TSI721_IBWIN_TLA(x)	(0x2900c + (x) * 0x20)
+#define TSI721_IBWIN_TLA_ADD	0xfffff000
+#define TSI721_IBWIN_TUA(x)	(0x29010 + (x) * 0x20)
+
+#define TSI721_SR2PC_GEN_INTE	0x29800
+#define TSI721_SR2PC_PWE	0x29804
+#define TSI721_SR2PC_GEN_INT	0x29808
+
+#define TSI721_DEV_INTE		0x29840
+#define TSI721_DEV_INT		0x29844
+#define TSI721_DEV_INTSET	0x29848
+#define TSI721_DEV_INT_BDMA_CH	0x00002000
+#define TSI721_DEV_INT_BDMA_NCH	0x00001000
+#define TSI721_DEV_INT_SMSG_CH	0x00000800
+#define TSI721_DEV_INT_SMSG_NCH	0x00000400
+#define TSI721_DEV_INT_SR2PC_CH	0x00000200
+#define TSI721_DEV_INT_SRIO	0x00000020
+
+#define TSI721_DEV_CHAN_INTE	0x2984c
+#define TSI721_DEV_CHAN_INT	0x29850
+
+#define TSI721_INT_SR2PC_CHAN_M	0xff000000
+#define TSI721_INT_SR2PC_CHAN(x) (1 << (24 + (x)))
+#define TSI721_INT_IMSG_CHAN_M	0x00ff0000
+#define TSI721_INT_IMSG_CHAN(x)	(1 << (16 + (x)))
+#define TSI721_INT_OMSG_CHAN_M	0x0000ff00
+#define TSI721_INT_OMSG_CHAN(x)	(1 << (8 + (x)))
+#define TSI721_INT_BDMA_CHAN_M	0x000000ff
+#define TSI721_INT_BDMA_CHAN(x)	(1 << (x))
+
+/*
+ * PC2SR block registers
+ */
+#define TSI721_OBWIN_NUM	TSI721_PC2SR_WINS
+
+#define TSI721_OBWINLB(x)	(0x40000 + (x) * 0x20)
+#define TSI721_OBWINLB_BA	0xffff8000
+#define TSI721_OBWINLB_WEN	0x00000001
+
+#define TSI721_OBWINUB(x)	(0x40004 + (x) * 0x20)
+
+#define TSI721_OBWINSZ(x)	(0x40008 + (x) * 0x20)
+#define TSI721_OBWINSZ_SIZE	0x00001f00
+#define TSI721_OBWIN_SIZE(size)	(__fls(size) - 15)
+
+#define TSI721_ZONE_SEL		0x41300
+#define TSI721_ZONE_SEL_RD_WRB	0x00020000
+#define TSI721_ZONE_SEL_GO	0x00010000
+#define TSI721_ZONE_SEL_WIN	0x00000038
+#define TSI721_ZONE_SEL_ZONE	0x00000007
+
+#define TSI721_LUT_DATA0	0x41304
+#define TSI721_LUT_DATA0_ADD	0xfffff000
+#define TSI721_LUT_DATA0_RDTYPE	0x00000f00
+#define TSI721_LUT_DATA0_NREAD	0x00000100
+#define TSI721_LUT_DATA0_MNTRD	0x00000200
+#define TSI721_LUT_DATA0_RDCRF	0x00000020
+#define TSI721_LUT_DATA0_WRCRF	0x00000010
+#define TSI721_LUT_DATA0_WRTYPE	0x0000000f
+#define TSI721_LUT_DATA0_NWR	0x00000001
+#define TSI721_LUT_DATA0_MNTWR	0x00000002
+#define TSI721_LUT_DATA0_NWR_R	0x00000004
+
+#define TSI721_LUT_DATA1	0x41308
+
+#define TSI721_LUT_DATA2	0x4130c
+#define TSI721_LUT_DATA2_HC	0xff000000
+#define TSI721_LUT_DATA2_ADD65	0x000c0000
+#define TSI721_LUT_DATA2_TT	0x00030000
+#define TSI721_LUT_DATA2_DSTID	0x0000ffff
+
+#define TSI721_PC2SR_INTE	0x41310
+
+#define TSI721_DEVCTL		0x48004
+#define TSI721_DEVCTL_SRBOOT_CMPL	0x00000004
+
+#define TSI721_I2C_INT_ENABLE	0x49120
+
+/*
+ * Block DMA Engine Registers
+ *   x = 0..7
+ */
+
+#define TSI721_DMAC_BASE(x)	(0x51000 + (x) * 0x1000)
+
+#define TSI721_DMAC_DWRCNT	0x000
+#define TSI721_DMAC_DRDCNT	0x004
+
+#define TSI721_DMAC_CTL		0x008
+#define TSI721_DMAC_CTL_SUSP	0x00000002
+#define TSI721_DMAC_CTL_INIT	0x00000001
+
+#define TSI721_DMAC_INT		0x00c
+#define TSI721_DMAC_INT_STFULL	0x00000010
+#define TSI721_DMAC_INT_DONE	0x00000008
+#define TSI721_DMAC_INT_SUSP	0x00000004
+#define TSI721_DMAC_INT_ERR	0x00000002
+#define TSI721_DMAC_INT_IOFDONE	0x00000001
+#define TSI721_DMAC_INT_ALL	0x0000001f
+
+#define TSI721_DMAC_INTSET	0x010
+
+#define TSI721_DMAC_STS		0x014
+#define TSI721_DMAC_STS_ABORT	0x00400000
+#define TSI721_DMAC_STS_RUN	0x00200000
+#define TSI721_DMAC_STS_CS	0x001f0000
+
+#define TSI721_DMAC_INTE	0x018
+
+#define TSI721_DMAC_DPTRL	0x024
+#define TSI721_DMAC_DPTRL_MASK	0xffffffe0
+
+#define TSI721_DMAC_DPTRH	0x028
+
+#define TSI721_DMAC_DSBL	0x02c
+#define TSI721_DMAC_DSBL_MASK	0xffffffc0
+
+#define TSI721_DMAC_DSBH	0x030
+
+#define TSI721_DMAC_DSSZ	0x034
+#define TSI721_DMAC_DSSZ_SIZE_M	0x0000000f
+#define TSI721_DMAC_DSSZ_SIZE(size)	(__fls(size) - 4)
+
+#define TSI721_DMAC_DSRP	0x038
+#define TSI721_DMAC_DSRP_MASK	0x0007ffff
+
+#define TSI721_DMAC_DSWP	0x03c
+#define TSI721_DMAC_DSWP_MASK	0x0007ffff
+
+#define TSI721_BDMA_INTE	0x5f000
+
+/*
+ * Messaging definitions
+ */
+#define TSI721_MSG_BUFFER_SIZE		RIO_MAX_MSG_SIZE
+#define TSI721_MSG_MAX_SIZE		RIO_MAX_MSG_SIZE
+#define TSI721_IMSG_MAXCH		8
+#define TSI721_IMSG_CHNUM		TSI721_IMSG_MAXCH
+#define TSI721_IMSGD_MIN_RING_SIZE	32
+#define TSI721_IMSGD_RING_SIZE		512
+
+#define TSI721_OMSG_CHNUM		4 /* One channel per MBOX */
+#define TSI721_OMSGD_MIN_RING_SIZE	32
+#define TSI721_OMSGD_RING_SIZE		512
+
+/*
+ * Outbound Messaging Engine Registers
+ *   x = 0..7
+ */
+
+#define TSI721_OBDMAC_DWRCNT(x)		(0x61000 + (x) * 0x1000)
+
+#define TSI721_OBDMAC_DRDCNT(x)		(0x61004 + (x) * 0x1000)
+
+#define TSI721_OBDMAC_CTL(x)		(0x61008 + (x) * 0x1000)
+#define TSI721_OBDMAC_CTL_MASK		0x00000007
+#define TSI721_OBDMAC_CTL_RETRY_THR	0x00000004
+#define TSI721_OBDMAC_CTL_SUSPEND	0x00000002
+#define TSI721_OBDMAC_CTL_INIT		0x00000001
+
+#define TSI721_OBDMAC_INT(x)		(0x6100c + (x) * 0x1000)
+#define TSI721_OBDMAC_INTSET(x)		(0x61010 + (x) * 0x1000)
+#define TSI721_OBDMAC_INTE(x)		(0x61018 + (x) * 0x1000)
+#define TSI721_OBDMAC_INT_MASK		0x0000001F
+#define TSI721_OBDMAC_INT_ST_FULL	0x00000010
+#define TSI721_OBDMAC_INT_DONE		0x00000008
+#define TSI721_OBDMAC_INT_SUSPENDED	0x00000004
+#define TSI721_OBDMAC_INT_ERROR		0x00000002
+#define TSI721_OBDMAC_INT_IOF_DONE	0x00000001
+#define TSI721_OBDMAC_INT_ALL		TSI721_OBDMAC_INT_MASK
+
+#define TSI721_OBDMAC_STS(x)		(0x61014 + (x) * 0x1000)
+#define TSI721_OBDMAC_STS_MASK		0x007f0000
+#define TSI721_OBDMAC_STS_ABORT		0x00400000
+#define TSI721_OBDMAC_STS_RUN		0x00200000
+#define TSI721_OBDMAC_STS_CS		0x001f0000
+
+#define TSI721_OBDMAC_PWE(x)		(0x6101c + (x) * 0x1000)
+#define TSI721_OBDMAC_PWE_MASK		0x00000002
+#define TSI721_OBDMAC_PWE_ERROR_EN	0x00000002
+
+#define TSI721_OBDMAC_DPTRL(x)		(0x61020 + (x) * 0x1000)
+#define TSI721_OBDMAC_DPTRL_MASK	0xfffffff0
+
+#define TSI721_OBDMAC_DPTRH(x)		(0x61024 + (x) * 0x1000)
+#define TSI721_OBDMAC_DPTRH_MASK	0xffffffff
+
+#define TSI721_OBDMAC_DSBL(x)		(0x61040 + (x) * 0x1000)
+#define TSI721_OBDMAC_DSBL_MASK		0xffffffc0
+
+#define TSI721_OBDMAC_DSBH(x)		(0x61044 + (x) * 0x1000)
+#define TSI721_OBDMAC_DSBH_MASK		0xffffffff
+
+#define TSI721_OBDMAC_DSSZ(x)		(0x61048 + (x) * 0x1000)
+#define TSI721_OBDMAC_DSSZ_MASK		0x0000000f
+
+#define TSI721_OBDMAC_DSRP(x)		(0x6104c + (x) * 0x1000)
+#define TSI721_OBDMAC_DSRP_MASK		0x0007ffff
+
+#define TSI721_OBDMAC_DSWP(x)		(0x61050 + (x) * 0x1000)
+#define TSI721_OBDMAC_DSWP_MASK		0x0007ffff
+
+#define TSI721_RQRPTO			0x60010
+#define TSI721_RQRPTO_MASK		0x00ffffff
+#define TSI721_RQRPTO_VAL		400	/* Response TO value */
+
+/*
+ * Inbound Messaging Engine Registers
+ *   x = 0..7
+ */
+
+#define TSI721_IB_DEVID_GLOBAL		0xffff
+#define TSI721_IBDMAC_FQBL(x)		(0x61200 + (x) * 0x1000)
+#define TSI721_IBDMAC_FQBL_MASK		0xffffffc0
+
+#define TSI721_IBDMAC_FQBH(x)		(0x61204 + (x) * 0x1000)
+#define TSI721_IBDMAC_FQBH_MASK		0xffffffff
+
+#define TSI721_IBDMAC_FQSZ_ENTRY_INX	TSI721_IMSGD_RING_SIZE
+#define TSI721_IBDMAC_FQSZ(x)		(0x61208 + (x) * 0x1000)
+#define TSI721_IBDMAC_FQSZ_MASK		0x0000000f
+
+#define TSI721_IBDMAC_FQRP(x)		(0x6120c + (x) * 0x1000)
+#define TSI721_IBDMAC_FQRP_MASK		0x0007ffff
+
+#define TSI721_IBDMAC_FQWP(x)		(0x61210 + (x) * 0x1000)
+#define TSI721_IBDMAC_FQWP_MASK		0x0007ffff
+
+#define TSI721_IBDMAC_FQTH(x)		(0x61214 + (x) * 0x1000)
+#define TSI721_IBDMAC_FQTH_MASK		0x0007ffff
+
+#define TSI721_IB_DEVID			0x60020
+#define TSI721_IB_DEVID_MASK		0x0000ffff
+
+#define TSI721_IBDMAC_CTL(x)		(0x61240 + (x) * 0x1000)
+#define TSI721_IBDMAC_CTL_MASK		0x00000003
+#define TSI721_IBDMAC_CTL_SUSPEND	0x00000002
+#define TSI721_IBDMAC_CTL_INIT		0x00000001
+
+#define TSI721_IBDMAC_STS(x)		(0x61244 + (x) * 0x1000)
+#define TSI721_IBDMAC_STS_MASK		0x007f0000
+#define TSI721_IBSMAC_STS_ABORT		0x00400000
+#define TSI721_IBSMAC_STS_RUN		0x00200000
+#define TSI721_IBSMAC_STS_CS		0x001f0000
+
+#define TSI721_IBDMAC_INT(x)		(0x61248 + (x) * 0x1000)
+#define TSI721_IBDMAC_INTSET(x)		(0x6124c + (x) * 0x1000)
+#define TSI721_IBDMAC_INTE(x)		(0x61250 + (x) * 0x1000)
+#define TSI721_IBDMAC_INT_MASK		0x0000100f
+#define TSI721_IBDMAC_INT_SRTO		0x00001000
+#define TSI721_IBDMAC_INT_SUSPENDED	0x00000008
+#define TSI721_IBDMAC_INT_PC_ERROR	0x00000004
+#define TSI721_IBDMAC_INT_FQ_LOW	0x00000002
+#define TSI721_IBDMAC_INT_DQ_RCV	0x00000001
+#define TSI721_IBDMAC_INT_ALL		TSI721_IBDMAC_INT_MASK
+
+#define TSI721_IBDMAC_PWE(x)		(0x61254 + (x) * 0x1000)
+#define TSI721_IBDMAC_PWE_MASK		0x00001700
+#define TSI721_IBDMAC_PWE_SRTO		0x00001000
+#define TSI721_IBDMAC_PWE_ILL_FMT	0x00000400
+#define TSI721_IBDMAC_PWE_ILL_DEC	0x00000200
+#define TSI721_IBDMAC_PWE_IMP_SP	0x00000100
+
+#define TSI721_IBDMAC_DQBL(x)		(0x61300 + (x) * 0x1000)
+#define TSI721_IBDMAC_DQBL_MASK		0xffffffc0
+#define TSI721_IBDMAC_DQBL_ADDR		0xffffffc0
+
+#define TSI721_IBDMAC_DQBH(x)		(0x61304 + (x) * 0x1000)
+#define TSI721_IBDMAC_DQBH_MASK		0xffffffff
+
+#define TSI721_IBDMAC_DQRP(x)		(0x61308 + (x) * 0x1000)
+#define TSI721_IBDMAC_DQRP_MASK		0x0007ffff
+
+#define TSI721_IBDMAC_DQWR(x)		(0x6130c + (x) * 0x1000)
+#define TSI721_IBDMAC_DQWR_MASK		0x0007ffff
+
+#define TSI721_IBDMAC_DQSZ(x)		(0x61314 + (x) * 0x1000)
+#define TSI721_IBDMAC_DQSZ_MASK		0x0000000f
+
+/*
+ * Messaging Engine Interrupts
+ */
+
+#define TSI721_SMSG_PWE			0x6a004
+
+#define TSI721_SMSG_INTE		0x6a000
+#define TSI721_SMSG_INT			0x6a008
+#define TSI721_SMSG_INTSET		0x6a010
+#define TSI721_SMSG_INT_MASK		0x0086ffff
+#define TSI721_SMSG_INT_UNS_RSP		0x00800000
+#define TSI721_SMSG_INT_ECC_NCOR	0x00040000
+#define TSI721_SMSG_INT_ECC_COR		0x00020000
+#define TSI721_SMSG_INT_ECC_NCOR_CH	0x0000ff00
+#define TSI721_SMSG_INT_ECC_COR_CH	0x000000ff
+
+#define TSI721_SMSG_ECC_LOG		0x6a014
+#define TSI721_SMSG_ECC_LOG_MASK	0x00070007
+#define TSI721_SMSG_ECC_LOG_ECC_NCOR_M	0x00070000
+#define TSI721_SMSG_ECC_LOG_ECC_COR_M	0x00000007
+
+#define TSI721_RETRY_GEN_CNT		0x6a100
+#define TSI721_RETRY_GEN_CNT_MASK	0xffffffff
+
+#define TSI721_RETRY_RX_CNT		0x6a104
+#define TSI721_RETRY_RX_CNT_MASK	0xffffffff
+
+#define TSI721_SMSG_ECC_COR_LOG(x)	(0x6a300 + (x) * 4)
+#define TSI721_SMSG_ECC_COR_LOG_MASK	0x000000ff
+
+#define TSI721_SMSG_ECC_NCOR(x)		(0x6a340 + (x) * 4)
+#define TSI721_SMSG_ECC_NCOR_MASK	0x000000ff
+
+/*
+ * Block DMA Descriptors
+ */
+
+struct tsi721_dma_desc {
+	__le32 type_id;
+
+#define TSI721_DMAD_DEVID	0x0000ffff
+#define TSI721_DMAD_CRF		0x00010000
+#define TSI721_DMAD_PRIO	0x00060000
+#define TSI721_DMAD_RTYPE	0x00780000
+#define TSI721_DMAD_IOF		0x08000000
+#define TSI721_DMAD_DTYPE	0xe0000000
+
+	__le32 bcount;
+
+#define TSI721_DMAD_BCOUNT1	0x03ffffff /* if DTYPE == 1 */
+#define TSI721_DMAD_BCOUNT2	0x0000000f /* if DTYPE == 2 */
+#define TSI721_DMAD_TT		0x0c000000
+#define TSI721_DMAD_RADDR0	0xc0000000
+
+	union {
+		__le32 raddr_lo;	   /* if DTYPE == (1 || 2) */
+		__le32 next_lo;		   /* if DTYPE == 3 */
+	};
+
+#define TSI721_DMAD_CFGOFF	0x00ffffff
+#define TSI721_DMAD_HOPCNT	0xff000000
+
+	union {
+		__le32 raddr_hi;	   /* if DTYPE == (1 || 2) */
+		__le32 next_hi;		   /* if DTYPE == 3 */
+	};
+
+	union {
+		struct {		   /* if DTYPE == 1 */
+			__le32 bufptr_lo;
+			__le32 bufptr_hi;
+			__le32 s_dist;
+			__le32 s_size;
+		} t1;
+		__le32 data[4];		   /* if DTYPE == 2 */
+		u32    reserved[4];	   /* if DTYPE == 3 */
+	};
+} __aligned(32);
+
+/*
+ * Inbound Messaging Descriptor
+ */
+struct tsi721_imsg_desc {
+	__le32 type_id;
+
+#define TSI721_IMD_DEVID	0x0000ffff
+#define TSI721_IMD_CRF		0x00010000
+#define TSI721_IMD_PRIO		0x00060000
+#define TSI721_IMD_TT		0x00180000
+#define TSI721_IMD_DTYPE	0xe0000000
+
+	__le32 msg_info;
+
+#define TSI721_IMD_BCOUNT	0x00000ff8
+#define TSI721_IMD_SSIZE	0x0000f000
+#define TSI721_IMD_LETER	0x00030000
+#define TSI721_IMD_XMBOX	0x003c0000
+#define TSI721_IMD_MBOX		0x00c00000
+#define TSI721_IMD_CS		0x78000000
+#define TSI721_IMD_HO		0x80000000
+
+	__le32 bufptr_lo;
+	__le32 bufptr_hi;
+	u32    reserved[12];
+
+} __aligned(64);
+
+/*
+ * Outbound Messaging Descriptor
+ */
+struct tsi721_omsg_desc {
+	__le32 type_id;
+
+#define TSI721_OMD_DEVID	0x0000ffff
+#define TSI721_OMD_CRF		0x00010000
+#define TSI721_OMD_PRIO		0x00060000
+#define TSI721_OMD_IOF		0x08000000
+#define TSI721_OMD_DTYPE	0xe0000000
+#define TSI721_OMD_RSRVD	0x17f80000
+
+	__le32 msg_info;
+
+#define TSI721_OMD_BCOUNT	0x00000ff8
+#define TSI721_OMD_SSIZE	0x0000f000
+#define TSI721_OMD_LETER	0x00030000
+#define TSI721_OMD_XMBOX	0x003c0000
+#define TSI721_OMD_MBOX		0x00c00000
+#define TSI721_OMD_TT		0x0c000000
+
+	union {
+		__le32 bufptr_lo;	/* if DTYPE == 4 */
+		__le32 next_lo;		/* if DTYPE == 5 */
+	};
+
+	union {
+		__le32 bufptr_hi;	/* if DTYPE == 4 */
+		__le32 next_hi;		/* if DTYPE == 5 */
+	};
+
+} __aligned(16);
+
+struct tsi721_dma_sts {
+	__le64	desc_sts[8];
+} __aligned(64);
+
+struct tsi721_desc_sts_fifo {
+	union {
+		__le64	da64;
+		struct {
+			__le32	lo;
+			__le32	hi;
+		} da32;
+	} stat[8];
+} __aligned(64);
+
+/* Descriptor types for BDMA and Messaging blocks */
+enum dma_dtype {
+	DTYPE1 = 1, /* Data Transfer DMA Descriptor */
+	DTYPE2 = 2, /* Immediate Data Transfer DMA Descriptor */
+	DTYPE3 = 3, /* Block Pointer DMA Descriptor */
+	DTYPE4 = 4, /* Outbound Msg DMA Descriptor */
+	DTYPE5 = 5, /* OB Messaging Block Pointer Descriptor */
+	DTYPE6 = 6  /* Inbound Messaging Descriptor */
+};
+
+enum dma_rtype {
+	NREAD = 0,
+	LAST_NWRITE_R = 1,
+	ALL_NWRITE = 2,
+	ALL_NWRITE_R = 3,
+	MAINT_RD = 4,
+	MAINT_WR = 5
+};
+
+/*
+ * mport Driver Definitions
+ */
+#define TSI721_DMA_CHNUM	TSI721_DMA_MAXCH
+
+#define TSI721_DMACH_MAINT	0	/* DMA channel for maint requests */
+#define TSI721_DMACH_MAINT_NBD	32	/* Number of BDs for maint requests */
+
+#define TSI721_DMACH_DMA	1	/* DMA channel for data transfers */
+
+#define MSG_DMA_ENTRY_INX_TO_SIZE(x)	((0x10 << (x)) & 0xFFFF0)
+
+enum tsi721_smsg_int_flag {
+	SMSG_INT_NONE		= 0x00000000,
+	SMSG_INT_ECC_COR_CH	= 0x000000ff,
+	SMSG_INT_ECC_NCOR_CH	= 0x0000ff00,
+	SMSG_INT_ECC_COR	= 0x00020000,
+	SMSG_INT_ECC_NCOR	= 0x00040000,
+	SMSG_INT_UNS_RSP	= 0x00800000,
+	SMSG_INT_ALL		= 0x0006ffff
+};
+
+/* Structures */
+
+#ifdef CONFIG_RAPIDIO_DMA_ENGINE
+
+#define TSI721_BDMA_MAX_BCOUNT	(TSI721_DMAD_BCOUNT1 + 1)
+
+struct tsi721_tx_desc {
+	struct dma_async_tx_descriptor	txd;
+	u16				destid;
+	/* low 64-bits of 66-bit RIO address */
+	u64				rio_addr;
+	/* upper 2-bits of 66-bit RIO address */
+	u8				rio_addr_u;
+	enum dma_rtype			rtype;
+	struct list_head		desc_node;
+	struct scatterlist		*sg;
+	unsigned int			sg_len;
+	enum dma_status			status;
+};
+
+struct tsi721_bdma_chan {
+	int		id;
+	void __iomem	*regs;
+	int		bd_num;		/* number of HW buffer descriptors */
+	void		*bd_base;	/* start of DMA descriptors */
+	dma_addr_t	bd_phys;
+	void		*sts_base;	/* start of DMA BD status FIFO */
+	dma_addr_t	sts_phys;
+	int		sts_size;
+	u32		sts_rdptr;
+	u32		wr_count;
+	u32		wr_count_next;
+
+	struct dma_chan		dchan;
+	struct tsi721_tx_desc	*tx_desc;
+	spinlock_t		lock;
+	struct list_head	active_list;
+	struct list_head	queue;
+	struct list_head	free_list;
+	struct tasklet_struct	tasklet;
+	bool			active;
+};
+
+#endif /* CONFIG_RAPIDIO_DMA_ENGINE */
+
+struct tsi721_bdma_maint {
+	int		ch_id;		/* BDMA channel number */
+	int		bd_num;		/* number of buffer descriptors */
+	void		*bd_base;	/* start of DMA descriptors */
+	dma_addr_t	bd_phys;
+	void		*sts_base;	/* start of DMA BD status FIFO */
+	dma_addr_t	sts_phys;
+	int		sts_size;
+};
+
+struct tsi721_imsg_ring {
+	u32		size;
+	/* VA/PA of data buffers for incoming messages */
+	void		*buf_base;
+	dma_addr_t	buf_phys;
+	/* VA/PA of circular free buffer list */
+	void		*imfq_base;
+	dma_addr_t	imfq_phys;
+	/* VA/PA of Inbound message descriptors */
+	void		*imd_base;
+	dma_addr_t	imd_phys;
+	 /* Inbound Queue buffer pointers */
+	void		*imq_base[TSI721_IMSGD_RING_SIZE];
+
+	u32		rx_slot;
+	void		*dev_id;
+	u32		fq_wrptr;
+	u32		desc_rdptr;
+	spinlock_t	lock;
+};
+
+struct tsi721_omsg_ring {
+	u32		size;
+	/* VA/PA of OB Msg descriptors */
+	void		*omd_base;
+	dma_addr_t	omd_phys;
+	/* VA/PA of OB Msg data buffers */
+	void		*omq_base[TSI721_OMSGD_RING_SIZE];
+	dma_addr_t	omq_phys[TSI721_OMSGD_RING_SIZE];
+	/* VA/PA of OB Msg descriptor status FIFO */
+	void		*sts_base;
+	dma_addr_t	sts_phys;
+	u32		sts_size; /* # of allocated status entries */
+	u32		sts_rdptr;
+
+	u32		tx_slot;
+	void		*dev_id;
+	u32		wr_count;
+	spinlock_t	lock;
+};
+
+enum tsi721_flags {
+	TSI721_USING_MSI	= (1 << 0),
+	TSI721_USING_MSIX	= (1 << 1),
+	TSI721_IMSGID_SET	= (1 << 2),
+};
+
+#ifdef CONFIG_PCI_MSI
+/*
+ * MSI-X Table Entries (0 ... 69)
+ */
+#define TSI721_MSIX_DMACH_DONE(x)	(0 + (x))
+#define TSI721_MSIX_DMACH_INT(x)	(8 + (x))
+#define TSI721_MSIX_BDMA_INT		16
+#define TSI721_MSIX_OMSG_DONE(x)	(17 + (x))
+#define TSI721_MSIX_OMSG_INT(x)		(25 + (x))
+#define TSI721_MSIX_IMSG_DQ_RCV(x)	(33 + (x))
+#define TSI721_MSIX_IMSG_INT(x)		(41 + (x))
+#define TSI721_MSIX_MSG_INT		49
+#define TSI721_MSIX_SR2PC_IDBQ_RCV(x)	(50 + (x))
+#define TSI721_MSIX_SR2PC_CH_INT(x)	(58 + (x))
+#define TSI721_MSIX_SR2PC_INT		66
+#define TSI721_MSIX_PC2SR_INT		67
+#define TSI721_MSIX_SRIO_MAC_INT	68
+#define TSI721_MSIX_I2C_INT		69
+
+/* MSI-X vector and init table entry indexes */
+enum tsi721_msix_vect {
+	TSI721_VECT_IDB,
+	TSI721_VECT_PWRX, /* PW_RX is part of SRIO MAC Interrupt reporting */
+	TSI721_VECT_OMB0_DONE,
+	TSI721_VECT_OMB1_DONE,
+	TSI721_VECT_OMB2_DONE,
+	TSI721_VECT_OMB3_DONE,
+	TSI721_VECT_OMB0_INT,
+	TSI721_VECT_OMB1_INT,
+	TSI721_VECT_OMB2_INT,
+	TSI721_VECT_OMB3_INT,
+	TSI721_VECT_IMB0_RCV,
+	TSI721_VECT_IMB1_RCV,
+	TSI721_VECT_IMB2_RCV,
+	TSI721_VECT_IMB3_RCV,
+	TSI721_VECT_IMB0_INT,
+	TSI721_VECT_IMB1_INT,
+	TSI721_VECT_IMB2_INT,
+	TSI721_VECT_IMB3_INT,
+#ifdef CONFIG_RAPIDIO_DMA_ENGINE
+	TSI721_VECT_DMA0_DONE,
+	TSI721_VECT_DMA1_DONE,
+	TSI721_VECT_DMA2_DONE,
+	TSI721_VECT_DMA3_DONE,
+	TSI721_VECT_DMA4_DONE,
+	TSI721_VECT_DMA5_DONE,
+	TSI721_VECT_DMA6_DONE,
+	TSI721_VECT_DMA7_DONE,
+	TSI721_VECT_DMA0_INT,
+	TSI721_VECT_DMA1_INT,
+	TSI721_VECT_DMA2_INT,
+	TSI721_VECT_DMA3_INT,
+	TSI721_VECT_DMA4_INT,
+	TSI721_VECT_DMA5_INT,
+	TSI721_VECT_DMA6_INT,
+	TSI721_VECT_DMA7_INT,
+#endif /* CONFIG_RAPIDIO_DMA_ENGINE */
+	TSI721_VECT_MAX
+};
+
+#define IRQ_DEVICE_NAME_MAX	64
+
+struct msix_irq {
+	u16	vector;
+	char	irq_name[IRQ_DEVICE_NAME_MAX];
+};
+#endif /* CONFIG_PCI_MSI */
+
+struct tsi721_device {
+	struct pci_dev	*pdev;
+	struct rio_mport *mport;
+	u32		flags;
+	void __iomem	*regs;
+#ifdef CONFIG_PCI_MSI
+	struct msix_irq	msix[TSI721_VECT_MAX];
+#endif
+	/* Doorbells */
+	void __iomem	*odb_base;
+	void		*idb_base;
+	dma_addr_t	idb_dma;
+	struct work_struct idb_work;
+	u32		db_discard_count;
+
+	/* Inbound Port-Write */
+	struct work_struct pw_work;
+	struct kfifo	pw_fifo;
+	spinlock_t	pw_fifo_lock;
+	u32		pw_discard_count;
+
+	/* BDMA Engine */
+	struct tsi721_bdma_maint mdma; /* Maintenance rd/wr request channel */
+
+#ifdef CONFIG_RAPIDIO_DMA_ENGINE
+	struct tsi721_bdma_chan bdma[TSI721_DMA_CHNUM];
+#endif
+
+	/* Inbound Messaging */
+	int		imsg_init[TSI721_IMSG_CHNUM];
+	struct tsi721_imsg_ring imsg_ring[TSI721_IMSG_CHNUM];
+
+	/* Outbound Messaging */
+	int		omsg_init[TSI721_OMSG_CHNUM];
+	struct tsi721_omsg_ring	omsg_ring[TSI721_OMSG_CHNUM];
+};
+
+#ifdef CONFIG_RAPIDIO_DMA_ENGINE
+extern void tsi721_bdma_handler(struct tsi721_bdma_chan *bdma_chan);
+extern int tsi721_register_dma(struct tsi721_device *priv);
+#endif
+
+#endif
diff --git a/kernel/drivers/rapidio/devices/tsi721_dma.c b/kernel/drivers/rapidio/devices/tsi721_dma.c
new file mode 100644
index 000000000..47295940a
--- /dev/null
+++ b/kernel/drivers/rapidio/devices/tsi721_dma.c
@@ -0,0 +1,907 @@
+/*
+ * DMA Engine support for Tsi721 PCIExpress-to-SRIO bridge
+ *
+ * Copyright (c) 2011-2014 Integrated Device Technology, Inc.
+ * Alexandre Bounine <alexandre.bounine@idt.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called COPYING.
+ */
+
+#include <linux/io.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/rio.h>
+#include <linux/rio_drv.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/kfifo.h>
+#include <linux/delay.h>
+#include "../../dma/dmaengine.h"
+
+#include "tsi721.h"
+
+#define TSI721_DMA_TX_QUEUE_SZ	16	/* number of transaction descriptors */
+
+#ifdef CONFIG_PCI_MSI
+static irqreturn_t tsi721_bdma_msix(int irq, void *ptr);
+#endif
+static int tsi721_submit_sg(struct tsi721_tx_desc *desc);
+
+static unsigned int dma_desc_per_channel = 128;
+module_param(dma_desc_per_channel, uint, S_IWUSR | S_IRUGO);
+MODULE_PARM_DESC(dma_desc_per_channel,
+		 "Number of DMA descriptors per channel (default: 128)");
+
+static inline struct tsi721_bdma_chan *to_tsi721_chan(struct dma_chan *chan)
+{
+	return container_of(chan, struct tsi721_bdma_chan, dchan);
+}
+
+static inline struct tsi721_device *to_tsi721(struct dma_device *ddev)
+{
+	return container_of(ddev, struct rio_mport, dma)->priv;
+}
+
+static inline
+struct tsi721_tx_desc *to_tsi721_desc(struct dma_async_tx_descriptor *txd)
+{
+	return container_of(txd, struct tsi721_tx_desc, txd);
+}
+
+static inline
+struct tsi721_tx_desc *tsi721_dma_first_active(
+				struct tsi721_bdma_chan *bdma_chan)
+{
+	return list_first_entry(&bdma_chan->active_list,
+				struct tsi721_tx_desc, desc_node);
+}
+
+static int tsi721_bdma_ch_init(struct tsi721_bdma_chan *bdma_chan, int bd_num)
+{
+	struct tsi721_dma_desc *bd_ptr;
+	struct device *dev = bdma_chan->dchan.device->dev;
+	u64		*sts_ptr;
+	dma_addr_t	bd_phys;
+	dma_addr_t	sts_phys;
+	int		sts_size;
+#ifdef CONFIG_PCI_MSI
+	struct tsi721_device *priv = to_tsi721(bdma_chan->dchan.device);
+#endif
+
+	dev_dbg(dev, "Init Block DMA Engine, CH%d\n", bdma_chan->id);
+
+	/*
+	 * Allocate space for DMA descriptors
+	 * (add an extra element for link descriptor)
+	 */
+	bd_ptr = dma_zalloc_coherent(dev,
+				(bd_num + 1) * sizeof(struct tsi721_dma_desc),
+				&bd_phys, GFP_KERNEL);
+	if (!bd_ptr)
+		return -ENOMEM;
+
+	bdma_chan->bd_num = bd_num;
+	bdma_chan->bd_phys = bd_phys;
+	bdma_chan->bd_base = bd_ptr;
+
+	dev_dbg(dev, "DMA descriptors @ %p (phys = %llx)\n",
+		bd_ptr, (unsigned long long)bd_phys);
+
+	/* Allocate space for descriptor status FIFO */
+	sts_size = ((bd_num + 1) >= TSI721_DMA_MINSTSSZ) ?
+					(bd_num + 1) : TSI721_DMA_MINSTSSZ;
+	sts_size = roundup_pow_of_two(sts_size);
+	sts_ptr = dma_zalloc_coherent(dev,
+				     sts_size * sizeof(struct tsi721_dma_sts),
+				     &sts_phys, GFP_KERNEL);
+	if (!sts_ptr) {
+		/* Free space allocated for DMA descriptors */
+		dma_free_coherent(dev,
+				  (bd_num + 1) * sizeof(struct tsi721_dma_desc),
+				  bd_ptr, bd_phys);
+		bdma_chan->bd_base = NULL;
+		return -ENOMEM;
+	}
+
+	bdma_chan->sts_phys = sts_phys;
+	bdma_chan->sts_base = sts_ptr;
+	bdma_chan->sts_size = sts_size;
+
+	dev_dbg(dev,
+		"desc status FIFO @ %p (phys = %llx) size=0x%x\n",
+		sts_ptr, (unsigned long long)sts_phys, sts_size);
+
+	/* Initialize DMA descriptors ring using added link descriptor */
+	bd_ptr[bd_num].type_id = cpu_to_le32(DTYPE3 << 29);
+	bd_ptr[bd_num].next_lo = cpu_to_le32((u64)bd_phys &
+						 TSI721_DMAC_DPTRL_MASK);
+	bd_ptr[bd_num].next_hi = cpu_to_le32((u64)bd_phys >> 32);
+
+	/* Setup DMA descriptor pointers */
+	iowrite32(((u64)bd_phys >> 32),
+		bdma_chan->regs + TSI721_DMAC_DPTRH);
+	iowrite32(((u64)bd_phys & TSI721_DMAC_DPTRL_MASK),
+		bdma_chan->regs + TSI721_DMAC_DPTRL);
+
+	/* Setup descriptor status FIFO */
+	iowrite32(((u64)sts_phys >> 32),
+		bdma_chan->regs + TSI721_DMAC_DSBH);
+	iowrite32(((u64)sts_phys & TSI721_DMAC_DSBL_MASK),
+		bdma_chan->regs + TSI721_DMAC_DSBL);
+	iowrite32(TSI721_DMAC_DSSZ_SIZE(sts_size),
+		bdma_chan->regs + TSI721_DMAC_DSSZ);
+
+	/* Clear interrupt bits */
+	iowrite32(TSI721_DMAC_INT_ALL,
+		bdma_chan->regs + TSI721_DMAC_INT);
+
+	ioread32(bdma_chan->regs + TSI721_DMAC_INT);
+
+#ifdef CONFIG_PCI_MSI
+	/* Request interrupt service if we are in MSI-X mode */
+	if (priv->flags & TSI721_USING_MSIX) {
+		int rc, idx;
+
+		idx = TSI721_VECT_DMA0_DONE + bdma_chan->id;
+
+		rc = request_irq(priv->msix[idx].vector, tsi721_bdma_msix, 0,
+				 priv->msix[idx].irq_name, (void *)bdma_chan);
+
+		if (rc) {
+			dev_dbg(dev, "Unable to get MSI-X for BDMA%d-DONE\n",
+				bdma_chan->id);
+			goto err_out;
+		}
+
+		idx = TSI721_VECT_DMA0_INT + bdma_chan->id;
+
+		rc = request_irq(priv->msix[idx].vector, tsi721_bdma_msix, 0,
+				priv->msix[idx].irq_name, (void *)bdma_chan);
+
+		if (rc)	{
+			dev_dbg(dev, "Unable to get MSI-X for BDMA%d-INT\n",
+				bdma_chan->id);
+			free_irq(
+				priv->msix[TSI721_VECT_DMA0_DONE +
+					    bdma_chan->id].vector,
+				(void *)bdma_chan);
+		}
+
+err_out:
+		if (rc) {
+			/* Free space allocated for DMA descriptors */
+			dma_free_coherent(dev,
+				(bd_num + 1) * sizeof(struct tsi721_dma_desc),
+				bd_ptr, bd_phys);
+			bdma_chan->bd_base = NULL;
+
+			/* Free space allocated for status descriptors */
+			dma_free_coherent(dev,
+				sts_size * sizeof(struct tsi721_dma_sts),
+				sts_ptr, sts_phys);
+			bdma_chan->sts_base = NULL;
+
+			return -EIO;
+		}
+	}
+#endif /* CONFIG_PCI_MSI */
+
+	/* Toggle DMA channel initialization */
+	iowrite32(TSI721_DMAC_CTL_INIT,	bdma_chan->regs + TSI721_DMAC_CTL);
+	ioread32(bdma_chan->regs + TSI721_DMAC_CTL);
+	bdma_chan->wr_count = bdma_chan->wr_count_next = 0;
+	bdma_chan->sts_rdptr = 0;
+	udelay(10);
+
+	return 0;
+}
+
+static int tsi721_bdma_ch_free(struct tsi721_bdma_chan *bdma_chan)
+{
+	u32 ch_stat;
+#ifdef CONFIG_PCI_MSI
+	struct tsi721_device *priv = to_tsi721(bdma_chan->dchan.device);
+#endif
+
+	if (bdma_chan->bd_base == NULL)
+		return 0;
+
+	/* Check if DMA channel still running */
+	ch_stat = ioread32(bdma_chan->regs + TSI721_DMAC_STS);
+	if (ch_stat & TSI721_DMAC_STS_RUN)
+		return -EFAULT;
+
+	/* Put DMA channel into init state */
+	iowrite32(TSI721_DMAC_CTL_INIT,	bdma_chan->regs + TSI721_DMAC_CTL);
+
+#ifdef CONFIG_PCI_MSI
+	if (priv->flags & TSI721_USING_MSIX) {
+		free_irq(priv->msix[TSI721_VECT_DMA0_DONE +
+				    bdma_chan->id].vector, (void *)bdma_chan);
+		free_irq(priv->msix[TSI721_VECT_DMA0_INT +
+				    bdma_chan->id].vector, (void *)bdma_chan);
+	}
+#endif /* CONFIG_PCI_MSI */
+
+	/* Free space allocated for DMA descriptors */
+	dma_free_coherent(bdma_chan->dchan.device->dev,
+		(bdma_chan->bd_num + 1) * sizeof(struct tsi721_dma_desc),
+		bdma_chan->bd_base, bdma_chan->bd_phys);
+	bdma_chan->bd_base = NULL;
+
+	/* Free space allocated for status FIFO */
+	dma_free_coherent(bdma_chan->dchan.device->dev,
+		bdma_chan->sts_size * sizeof(struct tsi721_dma_sts),
+		bdma_chan->sts_base, bdma_chan->sts_phys);
+	bdma_chan->sts_base = NULL;
+	return 0;
+}
+
+static void
+tsi721_bdma_interrupt_enable(struct tsi721_bdma_chan *bdma_chan, int enable)
+{
+	if (enable) {
+		/* Clear pending BDMA channel interrupts */
+		iowrite32(TSI721_DMAC_INT_ALL,
+			bdma_chan->regs + TSI721_DMAC_INT);
+		ioread32(bdma_chan->regs + TSI721_DMAC_INT);
+		/* Enable BDMA channel interrupts */
+		iowrite32(TSI721_DMAC_INT_ALL,
+			bdma_chan->regs + TSI721_DMAC_INTE);
+	} else {
+		/* Disable BDMA channel interrupts */
+		iowrite32(0, bdma_chan->regs + TSI721_DMAC_INTE);
+		/* Clear pending BDMA channel interrupts */
+		iowrite32(TSI721_DMAC_INT_ALL,
+			bdma_chan->regs + TSI721_DMAC_INT);
+	}
+
+}
+
+static bool tsi721_dma_is_idle(struct tsi721_bdma_chan *bdma_chan)
+{
+	u32 sts;
+
+	sts = ioread32(bdma_chan->regs + TSI721_DMAC_STS);
+	return ((sts & TSI721_DMAC_STS_RUN) == 0);
+}
+
+void tsi721_bdma_handler(struct tsi721_bdma_chan *bdma_chan)
+{
+	/* Disable BDMA channel interrupts */
+	iowrite32(0, bdma_chan->regs + TSI721_DMAC_INTE);
+	if (bdma_chan->active)
+		tasklet_schedule(&bdma_chan->tasklet);
+}
+
+#ifdef CONFIG_PCI_MSI
+/**
+ * tsi721_omsg_msix - MSI-X interrupt handler for BDMA channels
+ * @irq: Linux interrupt number
+ * @ptr: Pointer to interrupt-specific data (BDMA channel structure)
+ *
+ * Handles BDMA channel interrupts signaled using MSI-X.
+ */
+static irqreturn_t tsi721_bdma_msix(int irq, void *ptr)
+{
+	struct tsi721_bdma_chan *bdma_chan = ptr;
+
+	tsi721_bdma_handler(bdma_chan);
+	return IRQ_HANDLED;
+}
+#endif /* CONFIG_PCI_MSI */
+
+/* Must be called with the spinlock held */
+static void tsi721_start_dma(struct tsi721_bdma_chan *bdma_chan)
+{
+	if (!tsi721_dma_is_idle(bdma_chan)) {
+		dev_err(bdma_chan->dchan.device->dev,
+			"BUG: Attempt to start non-idle channel\n");
+		return;
+	}
+
+	if (bdma_chan->wr_count == bdma_chan->wr_count_next) {
+		dev_err(bdma_chan->dchan.device->dev,
+			"BUG: Attempt to start DMA with no BDs ready\n");
+		return;
+	}
+
+	dev_dbg(bdma_chan->dchan.device->dev,
+		"%s: chan_%d (wrc=%d)\n", __func__, bdma_chan->id,
+		bdma_chan->wr_count_next);
+
+	iowrite32(bdma_chan->wr_count_next,
+		bdma_chan->regs + TSI721_DMAC_DWRCNT);
+	ioread32(bdma_chan->regs + TSI721_DMAC_DWRCNT);
+
+	bdma_chan->wr_count = bdma_chan->wr_count_next;
+}
+
+static int
+tsi721_desc_fill_init(struct tsi721_tx_desc *desc,
+		      struct tsi721_dma_desc *bd_ptr,
+		      struct scatterlist *sg, u32 sys_size)
+{
+	u64 rio_addr;
+
+	if (bd_ptr == NULL)
+		return -EINVAL;
+
+	/* Initialize DMA descriptor */
+	bd_ptr->type_id = cpu_to_le32((DTYPE1 << 29) |
+				      (desc->rtype << 19) | desc->destid);
+	bd_ptr->bcount = cpu_to_le32(((desc->rio_addr & 0x3) << 30) |
+				     (sys_size << 26));
+	rio_addr = (desc->rio_addr >> 2) |
+				((u64)(desc->rio_addr_u & 0x3) << 62);
+	bd_ptr->raddr_lo = cpu_to_le32(rio_addr & 0xffffffff);
+	bd_ptr->raddr_hi = cpu_to_le32(rio_addr >> 32);
+	bd_ptr->t1.bufptr_lo = cpu_to_le32(
+					(u64)sg_dma_address(sg) & 0xffffffff);
+	bd_ptr->t1.bufptr_hi = cpu_to_le32((u64)sg_dma_address(sg) >> 32);
+	bd_ptr->t1.s_dist = 0;
+	bd_ptr->t1.s_size = 0;
+
+	return 0;
+}
+
+static int
+tsi721_desc_fill_end(struct tsi721_dma_desc *bd_ptr, u32 bcount, bool interrupt)
+{
+	if (bd_ptr == NULL)
+		return -EINVAL;
+
+	/* Update DMA descriptor */
+	if (interrupt)
+		bd_ptr->type_id |= cpu_to_le32(TSI721_DMAD_IOF);
+	bd_ptr->bcount |= cpu_to_le32(bcount & TSI721_DMAD_BCOUNT1);
+
+	return 0;
+}
+
+static void tsi721_dma_tx_err(struct tsi721_bdma_chan *bdma_chan,
+			      struct tsi721_tx_desc *desc)
+{
+	struct dma_async_tx_descriptor *txd = &desc->txd;
+	dma_async_tx_callback callback = txd->callback;
+	void *param = txd->callback_param;
+
+	list_move(&desc->desc_node, &bdma_chan->free_list);
+
+	if (callback)
+		callback(param);
+}
+
+static void tsi721_clr_stat(struct tsi721_bdma_chan *bdma_chan)
+{
+	u32 srd_ptr;
+	u64 *sts_ptr;
+	int i, j;
+
+	/* Check and clear descriptor status FIFO entries */
+	srd_ptr = bdma_chan->sts_rdptr;
+	sts_ptr = bdma_chan->sts_base;
+	j = srd_ptr * 8;
+	while (sts_ptr[j]) {
+		for (i = 0; i < 8 && sts_ptr[j]; i++, j++)
+			sts_ptr[j] = 0;
+
+		++srd_ptr;
+		srd_ptr %= bdma_chan->sts_size;
+		j = srd_ptr * 8;
+	}
+
+	iowrite32(srd_ptr, bdma_chan->regs + TSI721_DMAC_DSRP);
+	bdma_chan->sts_rdptr = srd_ptr;
+}
+
+/* Must be called with the channel spinlock held */
+static int tsi721_submit_sg(struct tsi721_tx_desc *desc)
+{
+	struct dma_chan *dchan = desc->txd.chan;
+	struct tsi721_bdma_chan *bdma_chan = to_tsi721_chan(dchan);
+	u32 sys_size;
+	u64 rio_addr;
+	dma_addr_t next_addr;
+	u32 bcount;
+	struct scatterlist *sg;
+	unsigned int i;
+	int err = 0;
+	struct tsi721_dma_desc *bd_ptr = NULL;
+	u32 idx, rd_idx;
+	u32 add_count = 0;
+
+	if (!tsi721_dma_is_idle(bdma_chan)) {
+		dev_err(bdma_chan->dchan.device->dev,
+			"BUG: Attempt to use non-idle channel\n");
+		return -EIO;
+	}
+
+	/*
+	 * Fill DMA channel's hardware buffer descriptors.
+	 * (NOTE: RapidIO destination address is limited to 64 bits for now)
+	 */
+	rio_addr = desc->rio_addr;
+	next_addr = -1;
+	bcount = 0;
+	sys_size = dma_to_mport(bdma_chan->dchan.device)->sys_size;
+
+	rd_idx = ioread32(bdma_chan->regs + TSI721_DMAC_DRDCNT);
+	rd_idx %= (bdma_chan->bd_num + 1);
+
+	idx = bdma_chan->wr_count_next % (bdma_chan->bd_num + 1);
+	if (idx == bdma_chan->bd_num) {
+		/* wrap around link descriptor */
+		idx = 0;
+		add_count++;
+	}
+
+	dev_dbg(dchan->device->dev, "%s: BD ring status: rdi=%d wri=%d\n",
+		__func__, rd_idx, idx);
+
+	for_each_sg(desc->sg, sg, desc->sg_len, i) {
+
+		dev_dbg(dchan->device->dev, "sg%d/%d addr: 0x%llx len: %d\n",
+			i, desc->sg_len,
+			(unsigned long long)sg_dma_address(sg), sg_dma_len(sg));
+
+		if (sg_dma_len(sg) > TSI721_BDMA_MAX_BCOUNT) {
+			dev_err(dchan->device->dev,
+				"%s: SG entry %d is too large\n", __func__, i);
+			err = -EINVAL;
+			break;
+		}
+
+		/*
+		 * If this sg entry forms contiguous block with previous one,
+		 * try to merge it into existing DMA descriptor
+		 */
+		if (next_addr == sg_dma_address(sg) &&
+		    bcount + sg_dma_len(sg) <= TSI721_BDMA_MAX_BCOUNT) {
+			/* Adjust byte count of the descriptor */
+			bcount += sg_dma_len(sg);
+			goto entry_done;
+		} else if (next_addr != -1) {
+			/* Finalize descriptor using total byte count value */
+			tsi721_desc_fill_end(bd_ptr, bcount, 0);
+			dev_dbg(dchan->device->dev,
+				"%s: prev desc final len: %d\n",
+				__func__, bcount);
+		}
+
+		desc->rio_addr = rio_addr;
+
+		if (i && idx == rd_idx) {
+			dev_dbg(dchan->device->dev,
+				"%s: HW descriptor ring is full @ %d\n",
+				__func__, i);
+			desc->sg = sg;
+			desc->sg_len -= i;
+			break;
+		}
+
+		bd_ptr = &((struct tsi721_dma_desc *)bdma_chan->bd_base)[idx];
+		err = tsi721_desc_fill_init(desc, bd_ptr, sg, sys_size);
+		if (err) {
+			dev_err(dchan->device->dev,
+				"Failed to build desc: err=%d\n", err);
+			break;
+		}
+
+		dev_dbg(dchan->device->dev, "bd_ptr = %p did=%d raddr=0x%llx\n",
+			bd_ptr, desc->destid, desc->rio_addr);
+
+		next_addr = sg_dma_address(sg);
+		bcount = sg_dma_len(sg);
+
+		add_count++;
+		if (++idx == bdma_chan->bd_num) {
+			/* wrap around link descriptor */
+			idx = 0;
+			add_count++;
+		}
+
+entry_done:
+		if (sg_is_last(sg)) {
+			tsi721_desc_fill_end(bd_ptr, bcount, 0);
+			dev_dbg(dchan->device->dev, "%s: last desc final len: %d\n",
+				__func__, bcount);
+			desc->sg_len = 0;
+		} else {
+			rio_addr += sg_dma_len(sg);
+			next_addr += sg_dma_len(sg);
+		}
+	}
+
+	if (!err)
+		bdma_chan->wr_count_next += add_count;
+
+	return err;
+}
+
+static void tsi721_advance_work(struct tsi721_bdma_chan *bdma_chan)
+{
+	struct tsi721_tx_desc *desc;
+	int err;
+
+	dev_dbg(bdma_chan->dchan.device->dev, "%s: Enter\n", __func__);
+
+	/*
+	 * If there are any new transactions in the queue add them
+	 * into the processing list
+	 */
+	if (!list_empty(&bdma_chan->queue))
+		list_splice_init(&bdma_chan->queue, &bdma_chan->active_list);
+
+	/* Start new transaction (if available) */
+	if (!list_empty(&bdma_chan->active_list)) {
+		desc = tsi721_dma_first_active(bdma_chan);
+		err = tsi721_submit_sg(desc);
+		if (!err)
+			tsi721_start_dma(bdma_chan);
+		else {
+			tsi721_dma_tx_err(bdma_chan, desc);
+			dev_dbg(bdma_chan->dchan.device->dev,
+				"ERR: tsi721_submit_sg failed with err=%d\n",
+				err);
+		}
+	}
+
+	dev_dbg(bdma_chan->dchan.device->dev, "%s: Exit\n", __func__);
+}
+
+static void tsi721_dma_tasklet(unsigned long data)
+{
+	struct tsi721_bdma_chan *bdma_chan = (struct tsi721_bdma_chan *)data;
+	u32 dmac_int, dmac_sts;
+
+	dmac_int = ioread32(bdma_chan->regs + TSI721_DMAC_INT);
+	dev_dbg(bdma_chan->dchan.device->dev, "%s: DMAC%d_INT = 0x%x\n",
+		__func__, bdma_chan->id, dmac_int);
+	/* Clear channel interrupts */
+	iowrite32(dmac_int, bdma_chan->regs + TSI721_DMAC_INT);
+
+	if (dmac_int & TSI721_DMAC_INT_ERR) {
+		dmac_sts = ioread32(bdma_chan->regs + TSI721_DMAC_STS);
+		dev_err(bdma_chan->dchan.device->dev,
+			"%s: DMA ERROR - DMAC%d_STS = 0x%x\n",
+			__func__, bdma_chan->id, dmac_sts);
+	}
+
+	if (dmac_int & TSI721_DMAC_INT_STFULL) {
+		dev_err(bdma_chan->dchan.device->dev,
+			"%s: DMAC%d descriptor status FIFO is full\n",
+			__func__, bdma_chan->id);
+	}
+
+	if (dmac_int & (TSI721_DMAC_INT_DONE | TSI721_DMAC_INT_IOFDONE)) {
+		struct tsi721_tx_desc *desc;
+
+		tsi721_clr_stat(bdma_chan);
+		spin_lock(&bdma_chan->lock);
+		desc = tsi721_dma_first_active(bdma_chan);
+
+		if (desc->sg_len == 0) {
+			dma_async_tx_callback callback = NULL;
+			void *param = NULL;
+
+			desc->status = DMA_COMPLETE;
+			dma_cookie_complete(&desc->txd);
+			if (desc->txd.flags & DMA_PREP_INTERRUPT) {
+				callback = desc->txd.callback;
+				param = desc->txd.callback_param;
+			}
+			list_move(&desc->desc_node, &bdma_chan->free_list);
+			spin_unlock(&bdma_chan->lock);
+			if (callback)
+				callback(param);
+			spin_lock(&bdma_chan->lock);
+		}
+
+		tsi721_advance_work(bdma_chan);
+		spin_unlock(&bdma_chan->lock);
+	}
+
+	/* Re-Enable BDMA channel interrupts */
+	iowrite32(TSI721_DMAC_INT_ALL, bdma_chan->regs + TSI721_DMAC_INTE);
+}
+
+static dma_cookie_t tsi721_tx_submit(struct dma_async_tx_descriptor *txd)
+{
+	struct tsi721_tx_desc *desc = to_tsi721_desc(txd);
+	struct tsi721_bdma_chan *bdma_chan = to_tsi721_chan(txd->chan);
+	dma_cookie_t cookie;
+
+	/* Check if the descriptor is detached from any lists */
+	if (!list_empty(&desc->desc_node)) {
+		dev_err(bdma_chan->dchan.device->dev,
+			"%s: wrong state of descriptor %p\n", __func__, txd);
+		return -EIO;
+	}
+
+	spin_lock_bh(&bdma_chan->lock);
+
+	if (!bdma_chan->active) {
+		spin_unlock_bh(&bdma_chan->lock);
+		return -ENODEV;
+	}
+
+	cookie = dma_cookie_assign(txd);
+	desc->status = DMA_IN_PROGRESS;
+	list_add_tail(&desc->desc_node, &bdma_chan->queue);
+
+	spin_unlock_bh(&bdma_chan->lock);
+	return cookie;
+}
+
+static int tsi721_alloc_chan_resources(struct dma_chan *dchan)
+{
+	struct tsi721_bdma_chan *bdma_chan = to_tsi721_chan(dchan);
+	struct tsi721_tx_desc *desc = NULL;
+	int i;
+
+	dev_dbg(dchan->device->dev, "%s: for channel %d\n",
+		__func__, bdma_chan->id);
+
+	if (bdma_chan->bd_base)
+		return TSI721_DMA_TX_QUEUE_SZ;
+
+	/* Initialize BDMA channel */
+	if (tsi721_bdma_ch_init(bdma_chan, dma_desc_per_channel)) {
+		dev_err(dchan->device->dev, "Unable to initialize data DMA"
+			" channel %d, aborting\n", bdma_chan->id);
+		return -ENODEV;
+	}
+
+	/* Allocate queue of transaction descriptors */
+	desc = kcalloc(TSI721_DMA_TX_QUEUE_SZ, sizeof(struct tsi721_tx_desc),
+			GFP_KERNEL);
+	if (!desc) {
+		dev_err(dchan->device->dev,
+			"Failed to allocate logical descriptors\n");
+		tsi721_bdma_ch_free(bdma_chan);
+		return -ENOMEM;
+	}
+
+	bdma_chan->tx_desc = desc;
+
+	for (i = 0; i < TSI721_DMA_TX_QUEUE_SZ; i++) {
+		dma_async_tx_descriptor_init(&desc[i].txd, dchan);
+		desc[i].txd.tx_submit = tsi721_tx_submit;
+		desc[i].txd.flags = DMA_CTRL_ACK;
+		list_add(&desc[i].desc_node, &bdma_chan->free_list);
+	}
+
+	dma_cookie_init(dchan);
+
+	bdma_chan->active = true;
+	tsi721_bdma_interrupt_enable(bdma_chan, 1);
+
+	return TSI721_DMA_TX_QUEUE_SZ;
+}
+
+static void tsi721_sync_dma_irq(struct tsi721_bdma_chan *bdma_chan)
+{
+	struct tsi721_device *priv = to_tsi721(bdma_chan->dchan.device);
+
+#ifdef CONFIG_PCI_MSI
+	if (priv->flags & TSI721_USING_MSIX) {
+		synchronize_irq(priv->msix[TSI721_VECT_DMA0_DONE +
+					   bdma_chan->id].vector);
+		synchronize_irq(priv->msix[TSI721_VECT_DMA0_INT +
+					   bdma_chan->id].vector);
+	} else
+#endif
+	synchronize_irq(priv->pdev->irq);
+}
+
+static void tsi721_free_chan_resources(struct dma_chan *dchan)
+{
+	struct tsi721_bdma_chan *bdma_chan = to_tsi721_chan(dchan);
+
+	dev_dbg(dchan->device->dev, "%s: for channel %d\n",
+		__func__, bdma_chan->id);
+
+	if (bdma_chan->bd_base == NULL)
+		return;
+
+	BUG_ON(!list_empty(&bdma_chan->active_list));
+	BUG_ON(!list_empty(&bdma_chan->queue));
+
+	tsi721_bdma_interrupt_enable(bdma_chan, 0);
+	bdma_chan->active = false;
+	tsi721_sync_dma_irq(bdma_chan);
+	tasklet_kill(&bdma_chan->tasklet);
+	INIT_LIST_HEAD(&bdma_chan->free_list);
+	kfree(bdma_chan->tx_desc);
+	tsi721_bdma_ch_free(bdma_chan);
+}
+
+static
+enum dma_status tsi721_tx_status(struct dma_chan *dchan, dma_cookie_t cookie,
+				 struct dma_tx_state *txstate)
+{
+	return dma_cookie_status(dchan, cookie, txstate);
+}
+
+static void tsi721_issue_pending(struct dma_chan *dchan)
+{
+	struct tsi721_bdma_chan *bdma_chan = to_tsi721_chan(dchan);
+
+	dev_dbg(dchan->device->dev, "%s: Enter\n", __func__);
+
+	if (tsi721_dma_is_idle(bdma_chan) && bdma_chan->active) {
+		spin_lock_bh(&bdma_chan->lock);
+		tsi721_advance_work(bdma_chan);
+		spin_unlock_bh(&bdma_chan->lock);
+	}
+}
+
+static
+struct dma_async_tx_descriptor *tsi721_prep_rio_sg(struct dma_chan *dchan,
+			struct scatterlist *sgl, unsigned int sg_len,
+			enum dma_transfer_direction dir, unsigned long flags,
+			void *tinfo)
+{
+	struct tsi721_bdma_chan *bdma_chan = to_tsi721_chan(dchan);
+	struct tsi721_tx_desc *desc, *_d;
+	struct rio_dma_ext *rext = tinfo;
+	enum dma_rtype rtype;
+	struct dma_async_tx_descriptor *txd = NULL;
+
+	if (!sgl || !sg_len) {
+		dev_err(dchan->device->dev, "%s: No SG list\n", __func__);
+		return NULL;
+	}
+
+	dev_dbg(dchan->device->dev, "%s: %s\n", __func__,
+		(dir == DMA_DEV_TO_MEM)?"READ":"WRITE");
+
+	if (dir == DMA_DEV_TO_MEM)
+		rtype = NREAD;
+	else if (dir == DMA_MEM_TO_DEV) {
+		switch (rext->wr_type) {
+		case RDW_ALL_NWRITE:
+			rtype = ALL_NWRITE;
+			break;
+		case RDW_ALL_NWRITE_R:
+			rtype = ALL_NWRITE_R;
+			break;
+		case RDW_LAST_NWRITE_R:
+		default:
+			rtype = LAST_NWRITE_R;
+			break;
+		}
+	} else {
+		dev_err(dchan->device->dev,
+			"%s: Unsupported DMA direction option\n", __func__);
+		return NULL;
+	}
+
+	spin_lock_bh(&bdma_chan->lock);
+
+	list_for_each_entry_safe(desc, _d, &bdma_chan->free_list, desc_node) {
+		if (async_tx_test_ack(&desc->txd)) {
+			list_del_init(&desc->desc_node);
+			desc->destid = rext->destid;
+			desc->rio_addr = rext->rio_addr;
+			desc->rio_addr_u = 0;
+			desc->rtype = rtype;
+			desc->sg_len	= sg_len;
+			desc->sg	= sgl;
+			txd		= &desc->txd;
+			txd->flags	= flags;
+			break;
+		}
+	}
+
+	spin_unlock_bh(&bdma_chan->lock);
+
+	return txd;
+}
+
+static int tsi721_terminate_all(struct dma_chan *dchan)
+{
+	struct tsi721_bdma_chan *bdma_chan = to_tsi721_chan(dchan);
+	struct tsi721_tx_desc *desc, *_d;
+	u32 dmac_int;
+	LIST_HEAD(list);
+
+	dev_dbg(dchan->device->dev, "%s: Entry\n", __func__);
+
+	spin_lock_bh(&bdma_chan->lock);
+
+	bdma_chan->active = false;
+
+	if (!tsi721_dma_is_idle(bdma_chan)) {
+		/* make sure to stop the transfer */
+		iowrite32(TSI721_DMAC_CTL_SUSP,
+			  bdma_chan->regs + TSI721_DMAC_CTL);
+
+		/* Wait until DMA channel stops */
+		do {
+			dmac_int = ioread32(bdma_chan->regs + TSI721_DMAC_INT);
+		} while ((dmac_int & TSI721_DMAC_INT_SUSP) == 0);
+	}
+
+	list_splice_init(&bdma_chan->active_list, &list);
+	list_splice_init(&bdma_chan->queue, &list);
+
+	list_for_each_entry_safe(desc, _d, &list, desc_node)
+		tsi721_dma_tx_err(bdma_chan, desc);
+
+	spin_unlock_bh(&bdma_chan->lock);
+
+	return 0;
+}
+
+int tsi721_register_dma(struct tsi721_device *priv)
+{
+	int i;
+	int nr_channels = 0;
+	int err;
+	struct rio_mport *mport = priv->mport;
+
+	INIT_LIST_HEAD(&mport->dma.channels);
+
+	for (i = 0; i < TSI721_DMA_MAXCH; i++) {
+		struct tsi721_bdma_chan *bdma_chan = &priv->bdma[i];
+
+		if (i == TSI721_DMACH_MAINT)
+			continue;
+
+		bdma_chan->regs = priv->regs + TSI721_DMAC_BASE(i);
+
+		bdma_chan->dchan.device = &mport->dma;
+		bdma_chan->dchan.cookie = 1;
+		bdma_chan->dchan.chan_id = i;
+		bdma_chan->id = i;
+		bdma_chan->active = false;
+
+		spin_lock_init(&bdma_chan->lock);
+
+		INIT_LIST_HEAD(&bdma_chan->active_list);
+		INIT_LIST_HEAD(&bdma_chan->queue);
+		INIT_LIST_HEAD(&bdma_chan->free_list);
+
+		tasklet_init(&bdma_chan->tasklet, tsi721_dma_tasklet,
+			     (unsigned long)bdma_chan);
+		list_add_tail(&bdma_chan->dchan.device_node,
+			      &mport->dma.channels);
+		nr_channels++;
+	}
+
+	mport->dma.chancnt = nr_channels;
+	dma_cap_zero(mport->dma.cap_mask);
+	dma_cap_set(DMA_PRIVATE, mport->dma.cap_mask);
+	dma_cap_set(DMA_SLAVE, mport->dma.cap_mask);
+
+	mport->dma.dev = &priv->pdev->dev;
+	mport->dma.device_alloc_chan_resources = tsi721_alloc_chan_resources;
+	mport->dma.device_free_chan_resources = tsi721_free_chan_resources;
+	mport->dma.device_tx_status = tsi721_tx_status;
+	mport->dma.device_issue_pending = tsi721_issue_pending;
+	mport->dma.device_prep_slave_sg = tsi721_prep_rio_sg;
+	mport->dma.device_terminate_all = tsi721_terminate_all;
+
+	err = dma_async_device_register(&mport->dma);
+	if (err)
+		dev_err(&priv->pdev->dev, "Failed to register DMA device\n");
+
+	return err;
+}
diff --git a/kernel/drivers/rapidio/rio-access.c b/kernel/drivers/rapidio/rio-access.c
new file mode 100644
index 000000000..a3824baca
--- /dev/null
+++ b/kernel/drivers/rapidio/rio-access.c
@@ -0,0 +1,175 @@
+/*
+ * RapidIO configuration space access support
+ *
+ * Copyright 2005 MontaVista Software, Inc.
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/rio.h>
+#include <linux/module.h>
+
+/*
+ * These interrupt-safe spinlocks protect all accesses to RIO
+ * configuration space and doorbell access.
+ */
+static DEFINE_SPINLOCK(rio_config_lock);
+static DEFINE_SPINLOCK(rio_doorbell_lock);
+
+/*
+ *  Wrappers for all RIO configuration access functions.  They just check
+ *  alignment, do locking and call the low-level functions pointed to
+ *  by rio_mport->ops.
+ */
+
+#define RIO_8_BAD 0
+#define RIO_16_BAD (offset & 1)
+#define RIO_32_BAD (offset & 3)
+
+/**
+ * RIO_LOP_READ - Generate rio_local_read_config_* functions
+ * @size: Size of configuration space read (8, 16, 32 bits)
+ * @type: C type of value argument
+ * @len: Length of configuration space read (1, 2, 4 bytes)
+ *
+ * Generates rio_local_read_config_* functions used to access
+ * configuration space registers on the local device.
+ */
+#define RIO_LOP_READ(size,type,len) \
+int __rio_local_read_config_##size \
+	(struct rio_mport *mport, u32 offset, type *value)		\
+{									\
+	int res;							\
+	unsigned long flags;						\
+	u32 data = 0;							\
+	if (RIO_##size##_BAD) return RIO_BAD_SIZE;			\
+	spin_lock_irqsave(&rio_config_lock, flags);			\
+	res = mport->ops->lcread(mport, mport->id, offset, len, &data);	\
+	*value = (type)data;						\
+	spin_unlock_irqrestore(&rio_config_lock, flags);		\
+	return res;							\
+}
+
+/**
+ * RIO_LOP_WRITE - Generate rio_local_write_config_* functions
+ * @size: Size of configuration space write (8, 16, 32 bits)
+ * @type: C type of value argument
+ * @len: Length of configuration space write (1, 2, 4 bytes)
+ *
+ * Generates rio_local_write_config_* functions used to access
+ * configuration space registers on the local device.
+ */
+#define RIO_LOP_WRITE(size,type,len) \
+int __rio_local_write_config_##size \
+	(struct rio_mport *mport, u32 offset, type value)		\
+{									\
+	int res;							\
+	unsigned long flags;						\
+	if (RIO_##size##_BAD) return RIO_BAD_SIZE;			\
+	spin_lock_irqsave(&rio_config_lock, flags);			\
+	res = mport->ops->lcwrite(mport, mport->id, offset, len, value);\
+	spin_unlock_irqrestore(&rio_config_lock, flags);		\
+	return res;							\
+}
+
+RIO_LOP_READ(8, u8, 1)
+RIO_LOP_READ(16, u16, 2)
+RIO_LOP_READ(32, u32, 4)
+RIO_LOP_WRITE(8, u8, 1)
+RIO_LOP_WRITE(16, u16, 2)
+RIO_LOP_WRITE(32, u32, 4)
+
+EXPORT_SYMBOL_GPL(__rio_local_read_config_8);
+EXPORT_SYMBOL_GPL(__rio_local_read_config_16);
+EXPORT_SYMBOL_GPL(__rio_local_read_config_32);
+EXPORT_SYMBOL_GPL(__rio_local_write_config_8);
+EXPORT_SYMBOL_GPL(__rio_local_write_config_16);
+EXPORT_SYMBOL_GPL(__rio_local_write_config_32);
+
+/**
+ * RIO_OP_READ - Generate rio_mport_read_config_* functions
+ * @size: Size of configuration space read (8, 16, 32 bits)
+ * @type: C type of value argument
+ * @len: Length of configuration space read (1, 2, 4 bytes)
+ *
+ * Generates rio_mport_read_config_* functions used to access
+ * configuration space registers on the local device.
+ */
+#define RIO_OP_READ(size,type,len) \
+int rio_mport_read_config_##size \
+	(struct rio_mport *mport, u16 destid, u8 hopcount, u32 offset, type *value)	\
+{									\
+	int res;							\
+	unsigned long flags;						\
+	u32 data = 0;							\
+	if (RIO_##size##_BAD) return RIO_BAD_SIZE;			\
+	spin_lock_irqsave(&rio_config_lock, flags);			\
+	res = mport->ops->cread(mport, mport->id, destid, hopcount, offset, len, &data); \
+	*value = (type)data;						\
+	spin_unlock_irqrestore(&rio_config_lock, flags);		\
+	return res;							\
+}
+
+/**
+ * RIO_OP_WRITE - Generate rio_mport_write_config_* functions
+ * @size: Size of configuration space write (8, 16, 32 bits)
+ * @type: C type of value argument
+ * @len: Length of configuration space write (1, 2, 4 bytes)
+ *
+ * Generates rio_mport_write_config_* functions used to access
+ * configuration space registers on the local device.
+ */
+#define RIO_OP_WRITE(size,type,len) \
+int rio_mport_write_config_##size \
+	(struct rio_mport *mport, u16 destid, u8 hopcount, u32 offset, type value)	\
+{									\
+	int res;							\
+	unsigned long flags;						\
+	if (RIO_##size##_BAD) return RIO_BAD_SIZE;			\
+	spin_lock_irqsave(&rio_config_lock, flags);			\
+	res = mport->ops->cwrite(mport, mport->id, destid, hopcount, offset, len, value); \
+	spin_unlock_irqrestore(&rio_config_lock, flags);		\
+	return res;							\
+}
+
+RIO_OP_READ(8, u8, 1)
+RIO_OP_READ(16, u16, 2)
+RIO_OP_READ(32, u32, 4)
+RIO_OP_WRITE(8, u8, 1)
+RIO_OP_WRITE(16, u16, 2)
+RIO_OP_WRITE(32, u32, 4)
+
+EXPORT_SYMBOL_GPL(rio_mport_read_config_8);
+EXPORT_SYMBOL_GPL(rio_mport_read_config_16);
+EXPORT_SYMBOL_GPL(rio_mport_read_config_32);
+EXPORT_SYMBOL_GPL(rio_mport_write_config_8);
+EXPORT_SYMBOL_GPL(rio_mport_write_config_16);
+EXPORT_SYMBOL_GPL(rio_mport_write_config_32);
+
+/**
+ * rio_mport_send_doorbell - Send a doorbell message
+ *
+ * @mport: RIO master port
+ * @destid: RIO device destination ID
+ * @data: Doorbell message data
+ *
+ * Send a doorbell message to a RIO device. The doorbell message
+ * has a 16-bit info field provided by the data argument.
+ */
+int rio_mport_send_doorbell(struct rio_mport *mport, u16 destid, u16 data)
+{
+	int res;
+	unsigned long flags;
+
+	spin_lock_irqsave(&rio_doorbell_lock, flags);
+	res = mport->ops->dsend(mport, mport->id, destid, data);
+	spin_unlock_irqrestore(&rio_doorbell_lock, flags);
+
+	return res;
+}
+
+EXPORT_SYMBOL_GPL(rio_mport_send_doorbell);
diff --git a/kernel/drivers/rapidio/rio-driver.c b/kernel/drivers/rapidio/rio-driver.c
new file mode 100644
index 000000000..f301f059b
--- /dev/null
+++ b/kernel/drivers/rapidio/rio-driver.c
@@ -0,0 +1,260 @@
+/*
+ * RapidIO driver support
+ *
+ * Copyright 2005 MontaVista Software, Inc.
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/rio.h>
+#include <linux/rio_ids.h>
+
+#include "rio.h"
+
+/**
+ *  rio_match_device - Tell if a RIO device has a matching RIO device id structure
+ *  @id: the RIO device id structure to match against
+ *  @rdev: the RIO device structure to match against
+ *
+ *  Used from driver probe and bus matching to check whether a RIO device
+ *  matches a device id structure provided by a RIO driver. Returns the
+ *  matching &struct rio_device_id or %NULL if there is no match.
+ */
+static const struct rio_device_id *rio_match_device(const struct rio_device_id
+						    *id,
+						    const struct rio_dev *rdev)
+{
+	while (id->vid || id->asm_vid) {
+		if (((id->vid == RIO_ANY_ID) || (id->vid == rdev->vid)) &&
+		    ((id->did == RIO_ANY_ID) || (id->did == rdev->did)) &&
+		    ((id->asm_vid == RIO_ANY_ID)
+		     || (id->asm_vid == rdev->asm_vid))
+		    && ((id->asm_did == RIO_ANY_ID)
+			|| (id->asm_did == rdev->asm_did)))
+			return id;
+		id++;
+	}
+	return NULL;
+}
+
+/**
+ * rio_dev_get - Increments the reference count of the RIO device structure
+ *
+ * @rdev: RIO device being referenced
+ *
+ * Each live reference to a device should be refcounted.
+ *
+ * Drivers for RIO devices should normally record such references in
+ * their probe() methods, when they bind to a device, and release
+ * them by calling rio_dev_put(), in their disconnect() methods.
+ */
+struct rio_dev *rio_dev_get(struct rio_dev *rdev)
+{
+	if (rdev)
+		get_device(&rdev->dev);
+
+	return rdev;
+}
+
+/**
+ * rio_dev_put - Release a use of the RIO device structure
+ *
+ * @rdev: RIO device being disconnected
+ *
+ * Must be called when a user of a device is finished with it.
+ * When the last user of the device calls this function, the
+ * memory of the device is freed.
+ */
+void rio_dev_put(struct rio_dev *rdev)
+{
+	if (rdev)
+		put_device(&rdev->dev);
+}
+
+/**
+ *  rio_device_probe - Tell if a RIO device structure has a matching RIO device id structure
+ *  @dev: the RIO device structure to match against
+ *
+ * return 0 and set rio_dev->driver when drv claims rio_dev, else error
+ */
+static int rio_device_probe(struct device *dev)
+{
+	struct rio_driver *rdrv = to_rio_driver(dev->driver);
+	struct rio_dev *rdev = to_rio_dev(dev);
+	int error = -ENODEV;
+	const struct rio_device_id *id;
+
+	if (!rdev->driver && rdrv->probe) {
+		if (!rdrv->id_table)
+			return error;
+		id = rio_match_device(rdrv->id_table, rdev);
+		rio_dev_get(rdev);
+		if (id)
+			error = rdrv->probe(rdev, id);
+		if (error >= 0) {
+			rdev->driver = rdrv;
+			error = 0;
+		} else
+			rio_dev_put(rdev);
+	}
+	return error;
+}
+
+/**
+ *  rio_device_remove - Remove a RIO device from the system
+ *
+ *  @dev: the RIO device structure to match against
+ *
+ * Remove a RIO device from the system. If it has an associated
+ * driver, then run the driver remove() method.  Then update
+ * the reference count.
+ */
+static int rio_device_remove(struct device *dev)
+{
+	struct rio_dev *rdev = to_rio_dev(dev);
+	struct rio_driver *rdrv = rdev->driver;
+
+	if (rdrv) {
+		if (rdrv->remove)
+			rdrv->remove(rdev);
+		rdev->driver = NULL;
+	}
+
+	rio_dev_put(rdev);
+
+	return 0;
+}
+
+/**
+ *  rio_register_driver - register a new RIO driver
+ *  @rdrv: the RIO driver structure to register
+ *
+ *  Adds a &struct rio_driver to the list of registered drivers.
+ *  Returns a negative value on error, otherwise 0. If no error
+ *  occurred, the driver remains registered even if no device
+ *  was claimed during registration.
+ */
+int rio_register_driver(struct rio_driver *rdrv)
+{
+	/* initialize common driver fields */
+	rdrv->driver.name = rdrv->name;
+	rdrv->driver.bus = &rio_bus_type;
+
+	/* register with core */
+	return driver_register(&rdrv->driver);
+}
+
+/**
+ *  rio_unregister_driver - unregister a RIO driver
+ *  @rdrv: the RIO driver structure to unregister
+ *
+ *  Deletes the &struct rio_driver from the list of registered RIO
+ *  drivers, gives it a chance to clean up by calling its remove()
+ *  function for each device it was responsible for, and marks those
+ *  devices as driverless.
+ */
+void rio_unregister_driver(struct rio_driver *rdrv)
+{
+	driver_unregister(&rdrv->driver);
+}
+
+void rio_attach_device(struct rio_dev *rdev)
+{
+	rdev->dev.bus = &rio_bus_type;
+}
+EXPORT_SYMBOL_GPL(rio_attach_device);
+
+/**
+ *  rio_match_bus - Tell if a RIO device structure has a matching RIO driver device id structure
+ *  @dev: the standard device structure to match against
+ *  @drv: the standard driver structure containing the ids to match against
+ *
+ *  Used by a driver to check whether a RIO device present in the
+ *  system is in its list of supported devices. Returns 1 if
+ *  there is a matching &struct rio_device_id or 0 if there is
+ *  no match.
+ */
+static int rio_match_bus(struct device *dev, struct device_driver *drv)
+{
+	struct rio_dev *rdev = to_rio_dev(dev);
+	struct rio_driver *rdrv = to_rio_driver(drv);
+	const struct rio_device_id *id = rdrv->id_table;
+	const struct rio_device_id *found_id;
+
+	if (!id)
+		goto out;
+
+	found_id = rio_match_device(id, rdev);
+
+	if (found_id)
+		return 1;
+
+      out:return 0;
+}
+
+static int rio_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+	struct rio_dev *rdev;
+
+	if (!dev)
+		return -ENODEV;
+
+	rdev = to_rio_dev(dev);
+	if (!rdev)
+		return -ENODEV;
+
+	if (add_uevent_var(env, "MODALIAS=rapidio:v%04Xd%04Xav%04Xad%04X",
+			   rdev->vid, rdev->did, rdev->asm_vid, rdev->asm_did))
+		return -ENOMEM;
+	return 0;
+}
+
+struct class rio_mport_class = {
+	.name		= "rapidio_port",
+	.owner		= THIS_MODULE,
+	.dev_groups	= rio_mport_groups,
+};
+EXPORT_SYMBOL_GPL(rio_mport_class);
+
+struct bus_type rio_bus_type = {
+	.name = "rapidio",
+	.match = rio_match_bus,
+	.dev_groups = rio_dev_groups,
+	.bus_groups = rio_bus_groups,
+	.probe = rio_device_probe,
+	.remove = rio_device_remove,
+	.uevent	= rio_uevent,
+};
+
+/**
+ *  rio_bus_init - Register the RapidIO bus with the device model
+ *
+ *  Registers the RIO mport device class and RIO bus type with the Linux
+ *  device model.
+ */
+static int __init rio_bus_init(void)
+{
+	int ret;
+
+	ret = class_register(&rio_mport_class);
+	if (!ret) {
+		ret = bus_register(&rio_bus_type);
+		if (ret)
+			class_unregister(&rio_mport_class);
+	}
+	return ret;
+}
+
+postcore_initcall(rio_bus_init);
+
+EXPORT_SYMBOL_GPL(rio_register_driver);
+EXPORT_SYMBOL_GPL(rio_unregister_driver);
+EXPORT_SYMBOL_GPL(rio_bus_type);
+EXPORT_SYMBOL_GPL(rio_dev_get);
+EXPORT_SYMBOL_GPL(rio_dev_put);
diff --git a/kernel/drivers/rapidio/rio-scan.c b/kernel/drivers/rapidio/rio-scan.c
new file mode 100644
index 000000000..47a1b2ea7
--- /dev/null
+++ b/kernel/drivers/rapidio/rio-scan.c
@@ -0,0 +1,1201 @@
+/*
+ * RapidIO enumeration and discovery support
+ *
+ * Copyright 2005 MontaVista Software, Inc.
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * Copyright 2009 Integrated Device Technology, Inc.
+ * Alex Bounine <alexandre.bounine@idt.com>
+ * - Added Port-Write/Error Management initialization and handling
+ *
+ * Copyright 2009 Sysgo AG
+ * Thomas Moll <thomas.moll@sysgo.com>
+ * - Added Input- Output- enable functionality, to allow full communication
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/init.h>
+#include <linux/rio.h>
+#include <linux/rio_drv.h>
+#include <linux/rio_ids.h>
+#include <linux/rio_regs.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/timer.h>
+#include <linux/sched.h>
+#include <linux/jiffies.h>
+#include <linux/slab.h>
+
+#include "rio.h"
+
+static void rio_init_em(struct rio_dev *rdev);
+
+static int next_destid = 0;
+static int next_comptag = 1;
+
+static int rio_mport_phys_table[] = {
+	RIO_EFB_PAR_EP_ID,
+	RIO_EFB_PAR_EP_REC_ID,
+	RIO_EFB_SER_EP_ID,
+	RIO_EFB_SER_EP_REC_ID,
+	-1,
+};
+
+
+/**
+ * rio_destid_alloc - Allocate next available destID for given network
+ * @net: RIO network
+ *
+ * Returns next available device destination ID for the specified RIO network.
+ * Marks allocated ID as one in use.
+ * Returns RIO_INVALID_DESTID if new destID is not available.
+ */
+static u16 rio_destid_alloc(struct rio_net *net)
+{
+	int destid;
+	struct rio_id_table *idtab = &net->destid_table;
+
+	spin_lock(&idtab->lock);
+	destid = find_first_zero_bit(idtab->table, idtab->max);
+
+	if (destid < idtab->max) {
+		set_bit(destid, idtab->table);
+		destid += idtab->start;
+	} else
+		destid = RIO_INVALID_DESTID;
+
+	spin_unlock(&idtab->lock);
+	return (u16)destid;
+}
+
+/**
+ * rio_destid_reserve - Reserve the specivied destID
+ * @net: RIO network
+ * @destid: destID to reserve
+ *
+ * Tries to reserve the specified destID.
+ * Returns 0 if successfull.
+ */
+static int rio_destid_reserve(struct rio_net *net, u16 destid)
+{
+	int oldbit;
+	struct rio_id_table *idtab = &net->destid_table;
+
+	destid -= idtab->start;
+	spin_lock(&idtab->lock);
+	oldbit = test_and_set_bit(destid, idtab->table);
+	spin_unlock(&idtab->lock);
+	return oldbit;
+}
+
+/**
+ * rio_destid_free - free a previously allocated destID
+ * @net: RIO network
+ * @destid: destID to free
+ *
+ * Makes the specified destID available for use.
+ */
+static void rio_destid_free(struct rio_net *net, u16 destid)
+{
+	struct rio_id_table *idtab = &net->destid_table;
+
+	destid -= idtab->start;
+	spin_lock(&idtab->lock);
+	clear_bit(destid, idtab->table);
+	spin_unlock(&idtab->lock);
+}
+
+/**
+ * rio_destid_first - return first destID in use
+ * @net: RIO network
+ */
+static u16 rio_destid_first(struct rio_net *net)
+{
+	int destid;
+	struct rio_id_table *idtab = &net->destid_table;
+
+	spin_lock(&idtab->lock);
+	destid = find_first_bit(idtab->table, idtab->max);
+	if (destid >= idtab->max)
+		destid = RIO_INVALID_DESTID;
+	else
+		destid += idtab->start;
+	spin_unlock(&idtab->lock);
+	return (u16)destid;
+}
+
+/**
+ * rio_destid_next - return next destID in use
+ * @net: RIO network
+ * @from: destination ID from which search shall continue
+ */
+static u16 rio_destid_next(struct rio_net *net, u16 from)
+{
+	int destid;
+	struct rio_id_table *idtab = &net->destid_table;
+
+	spin_lock(&idtab->lock);
+	destid = find_next_bit(idtab->table, idtab->max, from);
+	if (destid >= idtab->max)
+		destid = RIO_INVALID_DESTID;
+	else
+		destid += idtab->start;
+	spin_unlock(&idtab->lock);
+	return (u16)destid;
+}
+
+/**
+ * rio_get_device_id - Get the base/extended device id for a device
+ * @port: RIO master port
+ * @destid: Destination ID of device
+ * @hopcount: Hopcount to device
+ *
+ * Reads the base/extended device id from a device. Returns the
+ * 8/16-bit device ID.
+ */
+static u16 rio_get_device_id(struct rio_mport *port, u16 destid, u8 hopcount)
+{
+	u32 result;
+
+	rio_mport_read_config_32(port, destid, hopcount, RIO_DID_CSR, &result);
+
+	return RIO_GET_DID(port->sys_size, result);
+}
+
+/**
+ * rio_set_device_id - Set the base/extended device id for a device
+ * @port: RIO master port
+ * @destid: Destination ID of device
+ * @hopcount: Hopcount to device
+ * @did: Device ID value to be written
+ *
+ * Writes the base/extended device id from a device.
+ */
+static void rio_set_device_id(struct rio_mport *port, u16 destid, u8 hopcount, u16 did)
+{
+	rio_mport_write_config_32(port, destid, hopcount, RIO_DID_CSR,
+				  RIO_SET_DID(port->sys_size, did));
+}
+
+/**
+ * rio_local_set_device_id - Set the base/extended device id for a port
+ * @port: RIO master port
+ * @did: Device ID value to be written
+ *
+ * Writes the base/extended device id from a device.
+ */
+static void rio_local_set_device_id(struct rio_mport *port, u16 did)
+{
+	rio_local_write_config_32(port, RIO_DID_CSR, RIO_SET_DID(port->sys_size,
+				did));
+}
+
+/**
+ * rio_clear_locks- Release all host locks and signal enumeration complete
+ * @net: RIO network to run on
+ *
+ * Marks the component tag CSR on each device with the enumeration
+ * complete flag. When complete, it then release the host locks on
+ * each device. Returns 0 on success or %-EINVAL on failure.
+ */
+static int rio_clear_locks(struct rio_net *net)
+{
+	struct rio_mport *port = net->hport;
+	struct rio_dev *rdev;
+	u32 result;
+	int ret = 0;
+
+	/* Release host device id locks */
+	rio_local_write_config_32(port, RIO_HOST_DID_LOCK_CSR,
+				  port->host_deviceid);
+	rio_local_read_config_32(port, RIO_HOST_DID_LOCK_CSR, &result);
+	if ((result & 0xffff) != 0xffff) {
+		printk(KERN_INFO
+		       "RIO: badness when releasing host lock on master port, result %8.8x\n",
+		       result);
+		ret = -EINVAL;
+	}
+	list_for_each_entry(rdev, &net->devices, net_list) {
+		rio_write_config_32(rdev, RIO_HOST_DID_LOCK_CSR,
+				    port->host_deviceid);
+		rio_read_config_32(rdev, RIO_HOST_DID_LOCK_CSR, &result);
+		if ((result & 0xffff) != 0xffff) {
+			printk(KERN_INFO
+			       "RIO: badness when releasing host lock on vid %4.4x did %4.4x\n",
+			       rdev->vid, rdev->did);
+			ret = -EINVAL;
+		}
+
+		/* Mark device as discovered and enable master */
+		rio_read_config_32(rdev,
+				   rdev->phys_efptr + RIO_PORT_GEN_CTL_CSR,
+				   &result);
+		result |= RIO_PORT_GEN_DISCOVERED | RIO_PORT_GEN_MASTER;
+		rio_write_config_32(rdev,
+				    rdev->phys_efptr + RIO_PORT_GEN_CTL_CSR,
+				    result);
+	}
+
+	return ret;
+}
+
+/**
+ * rio_enum_host- Set host lock and initialize host destination ID
+ * @port: Master port to issue transaction
+ *
+ * Sets the local host master port lock and destination ID register
+ * with the host device ID value. The host device ID value is provided
+ * by the platform. Returns %0 on success or %-1 on failure.
+ */
+static int rio_enum_host(struct rio_mport *port)
+{
+	u32 result;
+
+	/* Set master port host device id lock */
+	rio_local_write_config_32(port, RIO_HOST_DID_LOCK_CSR,
+				  port->host_deviceid);
+
+	rio_local_read_config_32(port, RIO_HOST_DID_LOCK_CSR, &result);
+	if ((result & 0xffff) != port->host_deviceid)
+		return -1;
+
+	/* Set master port destid and init destid ctr */
+	rio_local_set_device_id(port, port->host_deviceid);
+	return 0;
+}
+
+/**
+ * rio_device_has_destid- Test if a device contains a destination ID register
+ * @port: Master port to issue transaction
+ * @src_ops: RIO device source operations
+ * @dst_ops: RIO device destination operations
+ *
+ * Checks the provided @src_ops and @dst_ops for the necessary transaction
+ * capabilities that indicate whether or not a device will implement a
+ * destination ID register. Returns 1 if true or 0 if false.
+ */
+static int rio_device_has_destid(struct rio_mport *port, int src_ops,
+				 int dst_ops)
+{
+	u32 mask = RIO_OPS_READ | RIO_OPS_WRITE | RIO_OPS_ATOMIC_TST_SWP | RIO_OPS_ATOMIC_INC | RIO_OPS_ATOMIC_DEC | RIO_OPS_ATOMIC_SET | RIO_OPS_ATOMIC_CLR;
+
+	return !!((src_ops | dst_ops) & mask);
+}
+
+/**
+ * rio_release_dev- Frees a RIO device struct
+ * @dev: LDM device associated with a RIO device struct
+ *
+ * Gets the RIO device struct associated a RIO device struct.
+ * The RIO device struct is freed.
+ */
+static void rio_release_dev(struct device *dev)
+{
+	struct rio_dev *rdev;
+
+	rdev = to_rio_dev(dev);
+	kfree(rdev);
+}
+
+/**
+ * rio_is_switch- Tests if a RIO device has switch capabilities
+ * @rdev: RIO device
+ *
+ * Gets the RIO device Processing Element Features register
+ * contents and tests for switch capabilities. Returns 1 if
+ * the device is a switch or 0 if it is not a switch.
+ * The RIO device struct is freed.
+ */
+static int rio_is_switch(struct rio_dev *rdev)
+{
+	if (rdev->pef & RIO_PEF_SWITCH)
+		return 1;
+	return 0;
+}
+
+/**
+ * rio_setup_device- Allocates and sets up a RIO device
+ * @net: RIO network
+ * @port: Master port to send transactions
+ * @destid: Current destination ID
+ * @hopcount: Current hopcount
+ * @do_enum: Enumeration/Discovery mode flag
+ *
+ * Allocates a RIO device and configures fields based on configuration
+ * space contents. If device has a destination ID register, a destination
+ * ID is either assigned in enumeration mode or read from configuration
+ * space in discovery mode.  If the device has switch capabilities, then
+ * a switch is allocated and configured appropriately. Returns a pointer
+ * to a RIO device on success or NULL on failure.
+ *
+ */
+static struct rio_dev *rio_setup_device(struct rio_net *net,
+					struct rio_mport *port, u16 destid,
+					u8 hopcount, int do_enum)
+{
+	int ret = 0;
+	struct rio_dev *rdev;
+	struct rio_switch *rswitch = NULL;
+	int result, rdid;
+	size_t size;
+	u32 swpinfo = 0;
+
+	size = sizeof(struct rio_dev);
+	if (rio_mport_read_config_32(port, destid, hopcount,
+				     RIO_PEF_CAR, &result))
+		return NULL;
+
+	if (result & (RIO_PEF_SWITCH | RIO_PEF_MULTIPORT)) {
+		rio_mport_read_config_32(port, destid, hopcount,
+					 RIO_SWP_INFO_CAR, &swpinfo);
+		if (result & RIO_PEF_SWITCH) {
+			size += (RIO_GET_TOTAL_PORTS(swpinfo) *
+				sizeof(rswitch->nextdev[0])) + sizeof(*rswitch);
+		}
+	}
+
+	rdev = kzalloc(size, GFP_KERNEL);
+	if (!rdev)
+		return NULL;
+
+	rdev->net = net;
+	rdev->pef = result;
+	rdev->swpinfo = swpinfo;
+	rio_mport_read_config_32(port, destid, hopcount, RIO_DEV_ID_CAR,
+				 &result);
+	rdev->did = result >> 16;
+	rdev->vid = result & 0xffff;
+	rio_mport_read_config_32(port, destid, hopcount, RIO_DEV_INFO_CAR,
+				 &rdev->device_rev);
+	rio_mport_read_config_32(port, destid, hopcount, RIO_ASM_ID_CAR,
+				 &result);
+	rdev->asm_did = result >> 16;
+	rdev->asm_vid = result & 0xffff;
+	rio_mport_read_config_32(port, destid, hopcount, RIO_ASM_INFO_CAR,
+				 &result);
+	rdev->asm_rev = result >> 16;
+	if (rdev->pef & RIO_PEF_EXT_FEATURES) {
+		rdev->efptr = result & 0xffff;
+		rdev->phys_efptr = rio_mport_get_physefb(port, 0, destid,
+							 hopcount);
+
+		rdev->em_efptr = rio_mport_get_feature(port, 0, destid,
+						hopcount, RIO_EFB_ERR_MGMNT);
+	}
+
+	rio_mport_read_config_32(port, destid, hopcount, RIO_SRC_OPS_CAR,
+				 &rdev->src_ops);
+	rio_mport_read_config_32(port, destid, hopcount, RIO_DST_OPS_CAR,
+				 &rdev->dst_ops);
+
+	if (do_enum) {
+		/* Assign component tag to device */
+		if (next_comptag >= 0x10000) {
+			pr_err("RIO: Component Tag Counter Overflow\n");
+			goto cleanup;
+		}
+		rio_mport_write_config_32(port, destid, hopcount,
+					  RIO_COMPONENT_TAG_CSR, next_comptag);
+		rdev->comp_tag = next_comptag++;
+		rdev->do_enum = true;
+	}  else {
+		rio_mport_read_config_32(port, destid, hopcount,
+					 RIO_COMPONENT_TAG_CSR,
+					 &rdev->comp_tag);
+	}
+
+	if (rio_device_has_destid(port, rdev->src_ops, rdev->dst_ops)) {
+		if (do_enum) {
+			rio_set_device_id(port, destid, hopcount, next_destid);
+			rdev->destid = next_destid;
+			next_destid = rio_destid_alloc(net);
+		} else
+			rdev->destid = rio_get_device_id(port, destid, hopcount);
+
+		rdev->hopcount = 0xff;
+	} else {
+		/* Switch device has an associated destID which
+		 * will be adjusted later
+		 */
+		rdev->destid = destid;
+		rdev->hopcount = hopcount;
+	}
+
+	/* If a PE has both switch and other functions, show it as a switch */
+	if (rio_is_switch(rdev)) {
+		rswitch = rdev->rswitch;
+		rswitch->port_ok = 0;
+		spin_lock_init(&rswitch->lock);
+		rswitch->route_table = kzalloc(sizeof(u8)*
+					RIO_MAX_ROUTE_ENTRIES(port->sys_size),
+					GFP_KERNEL);
+		if (!rswitch->route_table)
+			goto cleanup;
+		/* Initialize switch route table */
+		for (rdid = 0; rdid < RIO_MAX_ROUTE_ENTRIES(port->sys_size);
+				rdid++)
+			rswitch->route_table[rdid] = RIO_INVALID_ROUTE;
+		dev_set_name(&rdev->dev, "%02x:s:%04x", rdev->net->id,
+			     rdev->comp_tag & RIO_CTAG_UDEVID);
+
+		if (do_enum)
+			rio_route_clr_table(rdev, RIO_GLOBAL_TABLE, 0);
+
+		list_add_tail(&rswitch->node, &net->switches);
+
+	} else {
+		if (do_enum)
+			/*Enable Input Output Port (transmitter reviever)*/
+			rio_enable_rx_tx_port(port, 0, destid, hopcount, 0);
+
+		dev_set_name(&rdev->dev, "%02x:e:%04x", rdev->net->id,
+			     rdev->comp_tag & RIO_CTAG_UDEVID);
+	}
+
+	rdev->dev.parent = &port->dev;
+	rio_attach_device(rdev);
+
+	device_initialize(&rdev->dev);
+	rdev->dev.release = rio_release_dev;
+	rio_dev_get(rdev);
+
+	rdev->dma_mask = DMA_BIT_MASK(32);
+	rdev->dev.dma_mask = &rdev->dma_mask;
+	rdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+
+	if (rdev->dst_ops & RIO_DST_OPS_DOORBELL)
+		rio_init_dbell_res(&rdev->riores[RIO_DOORBELL_RESOURCE],
+				   0, 0xffff);
+
+	ret = rio_add_device(rdev);
+	if (ret)
+		goto cleanup;
+
+	return rdev;
+
+cleanup:
+	if (rswitch)
+		kfree(rswitch->route_table);
+
+	kfree(rdev);
+	return NULL;
+}
+
+/**
+ * rio_sport_is_active- Tests if a switch port has an active connection.
+ * @port: Master port to send transaction
+ * @destid: Associated destination ID for switch
+ * @hopcount: Hopcount to reach switch
+ * @sport: Switch port number
+ *
+ * Reads the port error status CSR for a particular switch port to
+ * determine if the port has an active link.  Returns
+ * %RIO_PORT_N_ERR_STS_PORT_OK if the port is active or %0 if it is
+ * inactive.
+ */
+static int
+rio_sport_is_active(struct rio_mport *port, u16 destid, u8 hopcount, int sport)
+{
+	u32 result = 0;
+	u32 ext_ftr_ptr;
+
+	ext_ftr_ptr = rio_mport_get_efb(port, 0, destid, hopcount, 0);
+
+	while (ext_ftr_ptr) {
+		rio_mport_read_config_32(port, destid, hopcount,
+					 ext_ftr_ptr, &result);
+		result = RIO_GET_BLOCK_ID(result);
+		if ((result == RIO_EFB_SER_EP_FREE_ID) ||
+		    (result == RIO_EFB_SER_EP_FREE_ID_V13P) ||
+		    (result == RIO_EFB_SER_EP_FREC_ID))
+			break;
+
+		ext_ftr_ptr = rio_mport_get_efb(port, 0, destid, hopcount,
+						ext_ftr_ptr);
+	}
+
+	if (ext_ftr_ptr)
+		rio_mport_read_config_32(port, destid, hopcount,
+					 ext_ftr_ptr +
+					 RIO_PORT_N_ERR_STS_CSR(sport),
+					 &result);
+
+	return result & RIO_PORT_N_ERR_STS_PORT_OK;
+}
+
+/**
+ * rio_get_host_deviceid_lock- Reads the Host Device ID Lock CSR on a device
+ * @port: Master port to send transaction
+ * @hopcount: Number of hops to the device
+ *
+ * Used during enumeration to read the Host Device ID Lock CSR on a
+ * RIO device. Returns the value of the lock register.
+ */
+static u16 rio_get_host_deviceid_lock(struct rio_mport *port, u8 hopcount)
+{
+	u32 result;
+
+	rio_mport_read_config_32(port, RIO_ANY_DESTID(port->sys_size), hopcount,
+				 RIO_HOST_DID_LOCK_CSR, &result);
+
+	return (u16) (result & 0xffff);
+}
+
+/**
+ * rio_enum_peer- Recursively enumerate a RIO network through a master port
+ * @net: RIO network being enumerated
+ * @port: Master port to send transactions
+ * @hopcount: Number of hops into the network
+ * @prev: Previous RIO device connected to the enumerated one
+ * @prev_port: Port on previous RIO device
+ *
+ * Recursively enumerates a RIO network.  Transactions are sent via the
+ * master port passed in @port.
+ */
+static int rio_enum_peer(struct rio_net *net, struct rio_mport *port,
+			 u8 hopcount, struct rio_dev *prev, int prev_port)
+{
+	struct rio_dev *rdev;
+	u32 regval;
+	int tmp;
+
+	if (rio_mport_chk_dev_access(port,
+			RIO_ANY_DESTID(port->sys_size), hopcount)) {
+		pr_debug("RIO: device access check failed\n");
+		return -1;
+	}
+
+	if (rio_get_host_deviceid_lock(port, hopcount) == port->host_deviceid) {
+		pr_debug("RIO: PE already discovered by this host\n");
+		/*
+		 * Already discovered by this host. Add it as another
+		 * link to the existing device.
+		 */
+		rio_mport_read_config_32(port, RIO_ANY_DESTID(port->sys_size),
+				hopcount, RIO_COMPONENT_TAG_CSR, &regval);
+
+		if (regval) {
+			rdev = rio_get_comptag((regval & 0xffff), NULL);
+
+			if (rdev && prev && rio_is_switch(prev)) {
+				pr_debug("RIO: redundant path to %s\n",
+					 rio_name(rdev));
+				prev->rswitch->nextdev[prev_port] = rdev;
+			}
+		}
+
+		return 0;
+	}
+
+	/* Attempt to acquire device lock */
+	rio_mport_write_config_32(port, RIO_ANY_DESTID(port->sys_size),
+				  hopcount,
+				  RIO_HOST_DID_LOCK_CSR, port->host_deviceid);
+	while ((tmp = rio_get_host_deviceid_lock(port, hopcount))
+	       < port->host_deviceid) {
+		/* Delay a bit */
+		mdelay(1);
+		/* Attempt to acquire device lock again */
+		rio_mport_write_config_32(port, RIO_ANY_DESTID(port->sys_size),
+					  hopcount,
+					  RIO_HOST_DID_LOCK_CSR,
+					  port->host_deviceid);
+	}
+
+	if (rio_get_host_deviceid_lock(port, hopcount) > port->host_deviceid) {
+		pr_debug(
+		    "RIO: PE locked by a higher priority host...retreating\n");
+		return -1;
+	}
+
+	/* Setup new RIO device */
+	rdev = rio_setup_device(net, port, RIO_ANY_DESTID(port->sys_size),
+					hopcount, 1);
+	if (rdev) {
+		/* Add device to the global and bus/net specific list. */
+		list_add_tail(&rdev->net_list, &net->devices);
+		rdev->prev = prev;
+		if (prev && rio_is_switch(prev))
+			prev->rswitch->nextdev[prev_port] = rdev;
+	} else
+		return -1;
+
+	if (rio_is_switch(rdev)) {
+		int sw_destid;
+		int cur_destid;
+		int sw_inport;
+		u16 destid;
+		int port_num;
+
+		sw_inport = RIO_GET_PORT_NUM(rdev->swpinfo);
+		rio_route_add_entry(rdev, RIO_GLOBAL_TABLE,
+				    port->host_deviceid, sw_inport, 0);
+		rdev->rswitch->route_table[port->host_deviceid] = sw_inport;
+
+		destid = rio_destid_first(net);
+		while (destid != RIO_INVALID_DESTID && destid < next_destid) {
+			if (destid != port->host_deviceid) {
+				rio_route_add_entry(rdev, RIO_GLOBAL_TABLE,
+						    destid, sw_inport, 0);
+				rdev->rswitch->route_table[destid] = sw_inport;
+			}
+			destid = rio_destid_next(net, destid + 1);
+		}
+		pr_debug(
+		    "RIO: found %s (vid %4.4x did %4.4x) with %d ports\n",
+		    rio_name(rdev), rdev->vid, rdev->did,
+		    RIO_GET_TOTAL_PORTS(rdev->swpinfo));
+		sw_destid = next_destid;
+		for (port_num = 0;
+		     port_num < RIO_GET_TOTAL_PORTS(rdev->swpinfo);
+		     port_num++) {
+			if (sw_inport == port_num) {
+				rio_enable_rx_tx_port(port, 0,
+					      RIO_ANY_DESTID(port->sys_size),
+					      hopcount, port_num);
+				rdev->rswitch->port_ok |= (1 << port_num);
+				continue;
+			}
+
+			cur_destid = next_destid;
+
+			if (rio_sport_is_active
+			    (port, RIO_ANY_DESTID(port->sys_size), hopcount,
+			     port_num)) {
+				pr_debug(
+				    "RIO: scanning device on port %d\n",
+				    port_num);
+				rio_enable_rx_tx_port(port, 0,
+					      RIO_ANY_DESTID(port->sys_size),
+					      hopcount, port_num);
+				rdev->rswitch->port_ok |= (1 << port_num);
+				rio_route_add_entry(rdev, RIO_GLOBAL_TABLE,
+						RIO_ANY_DESTID(port->sys_size),
+						port_num, 0);
+
+				if (rio_enum_peer(net, port, hopcount + 1,
+						  rdev, port_num) < 0)
+					return -1;
+
+				/* Update routing tables */
+				destid = rio_destid_next(net, cur_destid + 1);
+				if (destid != RIO_INVALID_DESTID) {
+					for (destid = cur_destid;
+					     destid < next_destid;) {
+						if (destid != port->host_deviceid) {
+							rio_route_add_entry(rdev,
+								    RIO_GLOBAL_TABLE,
+								    destid,
+								    port_num,
+								    0);
+							rdev->rswitch->
+								route_table[destid] =
+								port_num;
+						}
+						destid = rio_destid_next(net,
+								destid + 1);
+					}
+				}
+			} else {
+				/* If switch supports Error Management,
+				 * set PORT_LOCKOUT bit for unused port
+				 */
+				if (rdev->em_efptr)
+					rio_set_port_lockout(rdev, port_num, 1);
+
+				rdev->rswitch->port_ok &= ~(1 << port_num);
+			}
+		}
+
+		/* Direct Port-write messages to the enumeratiing host */
+		if ((rdev->src_ops & RIO_SRC_OPS_PORT_WRITE) &&
+		    (rdev->em_efptr)) {
+			rio_write_config_32(rdev,
+					rdev->em_efptr + RIO_EM_PW_TGT_DEVID,
+					(port->host_deviceid << 16) |
+					(port->sys_size << 15));
+		}
+
+		rio_init_em(rdev);
+
+		/* Check for empty switch */
+		if (next_destid == sw_destid)
+			next_destid = rio_destid_alloc(net);
+
+		rdev->destid = sw_destid;
+	} else
+		pr_debug("RIO: found %s (vid %4.4x did %4.4x)\n",
+		    rio_name(rdev), rdev->vid, rdev->did);
+
+	return 0;
+}
+
+/**
+ * rio_enum_complete- Tests if enumeration of a network is complete
+ * @port: Master port to send transaction
+ *
+ * Tests the PGCCSR discovered bit for non-zero value (enumeration
+ * complete flag). Return %1 if enumeration is complete or %0 if
+ * enumeration is incomplete.
+ */
+static int rio_enum_complete(struct rio_mport *port)
+{
+	u32 regval;
+
+	rio_local_read_config_32(port, port->phys_efptr + RIO_PORT_GEN_CTL_CSR,
+				 &regval);
+	return (regval & RIO_PORT_GEN_DISCOVERED) ? 1 : 0;
+}
+
+/**
+ * rio_disc_peer- Recursively discovers a RIO network through a master port
+ * @net: RIO network being discovered
+ * @port: Master port to send transactions
+ * @destid: Current destination ID in network
+ * @hopcount: Number of hops into the network
+ * @prev: previous rio_dev
+ * @prev_port: previous port number
+ *
+ * Recursively discovers a RIO network.  Transactions are sent via the
+ * master port passed in @port.
+ */
+static int
+rio_disc_peer(struct rio_net *net, struct rio_mport *port, u16 destid,
+	      u8 hopcount, struct rio_dev *prev, int prev_port)
+{
+	u8 port_num, route_port;
+	struct rio_dev *rdev;
+	u16 ndestid;
+
+	/* Setup new RIO device */
+	if ((rdev = rio_setup_device(net, port, destid, hopcount, 0))) {
+		/* Add device to the global and bus/net specific list. */
+		list_add_tail(&rdev->net_list, &net->devices);
+		rdev->prev = prev;
+		if (prev && rio_is_switch(prev))
+			prev->rswitch->nextdev[prev_port] = rdev;
+	} else
+		return -1;
+
+	if (rio_is_switch(rdev)) {
+		/* Associated destid is how we accessed this switch */
+		rdev->destid = destid;
+
+		pr_debug(
+		    "RIO: found %s (vid %4.4x did %4.4x) with %d ports\n",
+		    rio_name(rdev), rdev->vid, rdev->did,
+		    RIO_GET_TOTAL_PORTS(rdev->swpinfo));
+		for (port_num = 0;
+		     port_num < RIO_GET_TOTAL_PORTS(rdev->swpinfo);
+		     port_num++) {
+			if (RIO_GET_PORT_NUM(rdev->swpinfo) == port_num)
+				continue;
+
+			if (rio_sport_is_active
+			    (port, destid, hopcount, port_num)) {
+				pr_debug(
+				    "RIO: scanning device on port %d\n",
+				    port_num);
+
+				rio_lock_device(port, destid, hopcount, 1000);
+
+				for (ndestid = 0;
+				     ndestid < RIO_ANY_DESTID(port->sys_size);
+				     ndestid++) {
+					rio_route_get_entry(rdev,
+							    RIO_GLOBAL_TABLE,
+							    ndestid,
+							    &route_port, 0);
+					if (route_port == port_num)
+						break;
+				}
+
+				if (ndestid == RIO_ANY_DESTID(port->sys_size))
+					continue;
+				rio_unlock_device(port, destid, hopcount);
+				if (rio_disc_peer(net, port, ndestid,
+					hopcount + 1, rdev, port_num) < 0)
+					return -1;
+			}
+		}
+	} else
+		pr_debug("RIO: found %s (vid %4.4x did %4.4x)\n",
+		    rio_name(rdev), rdev->vid, rdev->did);
+
+	return 0;
+}
+
+/**
+ * rio_mport_is_active- Tests if master port link is active
+ * @port: Master port to test
+ *
+ * Reads the port error status CSR for the master port to
+ * determine if the port has an active link.  Returns
+ * %RIO_PORT_N_ERR_STS_PORT_OK if the  master port is active
+ * or %0 if it is inactive.
+ */
+static int rio_mport_is_active(struct rio_mport *port)
+{
+	u32 result = 0;
+	u32 ext_ftr_ptr;
+	int *entry = rio_mport_phys_table;
+
+	do {
+		if ((ext_ftr_ptr =
+		     rio_mport_get_feature(port, 1, 0, 0, *entry)))
+			break;
+	} while (*++entry >= 0);
+
+	if (ext_ftr_ptr)
+		rio_local_read_config_32(port,
+					 ext_ftr_ptr +
+					 RIO_PORT_N_ERR_STS_CSR(port->index),
+					 &result);
+
+	return result & RIO_PORT_N_ERR_STS_PORT_OK;
+}
+
+/**
+ * rio_alloc_net- Allocate and configure a new RIO network
+ * @port: Master port associated with the RIO network
+ * @do_enum: Enumeration/Discovery mode flag
+ * @start: logical minimal start id for new net
+ *
+ * Allocates a RIO network structure, initializes per-network
+ * list heads, and adds the associated master port to the
+ * network list of associated master ports. Returns a
+ * RIO network pointer on success or %NULL on failure.
+ */
+static struct rio_net *rio_alloc_net(struct rio_mport *port,
+					       int do_enum, u16 start)
+{
+	struct rio_net *net;
+
+	net = kzalloc(sizeof(struct rio_net), GFP_KERNEL);
+	if (net && do_enum) {
+		net->destid_table.table = kcalloc(
+			BITS_TO_LONGS(RIO_MAX_ROUTE_ENTRIES(port->sys_size)),
+			sizeof(long),
+			GFP_KERNEL);
+
+		if (net->destid_table.table == NULL) {
+			pr_err("RIO: failed to allocate destID table\n");
+			kfree(net);
+			net = NULL;
+		} else {
+			net->destid_table.start = start;
+			net->destid_table.max =
+					RIO_MAX_ROUTE_ENTRIES(port->sys_size);
+			spin_lock_init(&net->destid_table.lock);
+		}
+	}
+
+	if (net) {
+		INIT_LIST_HEAD(&net->node);
+		INIT_LIST_HEAD(&net->devices);
+		INIT_LIST_HEAD(&net->switches);
+		INIT_LIST_HEAD(&net->mports);
+		list_add_tail(&port->nnode, &net->mports);
+		net->hport = port;
+		net->id = port->id;
+	}
+	return net;
+}
+
+/**
+ * rio_update_route_tables- Updates route tables in switches
+ * @net: RIO network to run update on
+ *
+ * For each enumerated device, ensure that each switch in a system
+ * has correct routing entries. Add routes for devices that where
+ * unknown dirung the first enumeration pass through the switch.
+ */
+static void rio_update_route_tables(struct rio_net *net)
+{
+	struct rio_dev *rdev, *swrdev;
+	struct rio_switch *rswitch;
+	u8 sport;
+	u16 destid;
+
+	list_for_each_entry(rdev, &net->devices, net_list) {
+
+		destid = rdev->destid;
+
+		list_for_each_entry(rswitch, &net->switches, node) {
+
+			if (rio_is_switch(rdev)	&& (rdev->rswitch == rswitch))
+				continue;
+
+			if (RIO_INVALID_ROUTE == rswitch->route_table[destid]) {
+				swrdev = sw_to_rio_dev(rswitch);
+
+				/* Skip if destid ends in empty switch*/
+				if (swrdev->destid == destid)
+					continue;
+
+				sport = RIO_GET_PORT_NUM(swrdev->swpinfo);
+
+				rio_route_add_entry(swrdev, RIO_GLOBAL_TABLE,
+						    destid, sport, 0);
+				rswitch->route_table[destid] = sport;
+			}
+		}
+	}
+}
+
+/**
+ * rio_init_em - Initializes RIO Error Management (for switches)
+ * @rdev: RIO device
+ *
+ * For each enumerated switch, call device-specific error management
+ * initialization routine (if supplied by the switch driver).
+ */
+static void rio_init_em(struct rio_dev *rdev)
+{
+	if (rio_is_switch(rdev) && (rdev->em_efptr) &&
+	    rdev->rswitch->ops && rdev->rswitch->ops->em_init) {
+		rdev->rswitch->ops->em_init(rdev);
+	}
+}
+
+/**
+ * rio_pw_enable - Enables/disables port-write handling by a master port
+ * @port: Master port associated with port-write handling
+ * @enable:  1=enable,  0=disable
+ */
+static void rio_pw_enable(struct rio_mport *port, int enable)
+{
+	if (port->ops->pwenable)
+		port->ops->pwenable(port, enable);
+}
+
+/**
+ * rio_enum_mport- Start enumeration through a master port
+ * @mport: Master port to send transactions
+ * @flags: Enumeration control flags
+ *
+ * Starts the enumeration process. If somebody has enumerated our
+ * master port device, then give up. If not and we have an active
+ * link, then start recursive peer enumeration. Returns %0 if
+ * enumeration succeeds or %-EBUSY if enumeration fails.
+ */
+static int rio_enum_mport(struct rio_mport *mport, u32 flags)
+{
+	struct rio_net *net = NULL;
+	int rc = 0;
+
+	printk(KERN_INFO "RIO: enumerate master port %d, %s\n", mport->id,
+	       mport->name);
+
+	/*
+	 * To avoid multiple start requests (repeat enumeration is not supported
+	 * by this method) check if enumeration/discovery was performed for this
+	 * mport: if mport was added into the list of mports for a net exit
+	 * with error.
+	 */
+	if (mport->nnode.next || mport->nnode.prev)
+		return -EBUSY;
+
+	/* If somebody else enumerated our master port device, bail. */
+	if (rio_enum_host(mport) < 0) {
+		printk(KERN_INFO
+		       "RIO: master port %d device has been enumerated by a remote host\n",
+		       mport->id);
+		rc = -EBUSY;
+		goto out;
+	}
+
+	/* If master port has an active link, allocate net and enum peers */
+	if (rio_mport_is_active(mport)) {
+		net = rio_alloc_net(mport, 1, 0);
+		if (!net) {
+			printk(KERN_ERR "RIO: failed to allocate new net\n");
+			rc = -ENOMEM;
+			goto out;
+		}
+
+		/* reserve mport destID in new net */
+		rio_destid_reserve(net, mport->host_deviceid);
+
+		/* Enable Input Output Port (transmitter reviever) */
+		rio_enable_rx_tx_port(mport, 1, 0, 0, 0);
+
+		/* Set component tag for host */
+		rio_local_write_config_32(mport, RIO_COMPONENT_TAG_CSR,
+					  next_comptag++);
+
+		next_destid = rio_destid_alloc(net);
+
+		if (rio_enum_peer(net, mport, 0, NULL, 0) < 0) {
+			/* A higher priority host won enumeration, bail. */
+			printk(KERN_INFO
+			       "RIO: master port %d device has lost enumeration to a remote host\n",
+			       mport->id);
+			rio_clear_locks(net);
+			rc = -EBUSY;
+			goto out;
+		}
+		/* free the last allocated destID (unused) */
+		rio_destid_free(net, next_destid);
+		rio_update_route_tables(net);
+		rio_clear_locks(net);
+		rio_pw_enable(mport, 1);
+	} else {
+		printk(KERN_INFO "RIO: master port %d link inactive\n",
+		       mport->id);
+		rc = -EINVAL;
+	}
+
+      out:
+	return rc;
+}
+
+/**
+ * rio_build_route_tables- Generate route tables from switch route entries
+ * @net: RIO network to run route tables scan on
+ *
+ * For each switch device, generate a route table by copying existing
+ * route entries from the switch.
+ */
+static void rio_build_route_tables(struct rio_net *net)
+{
+	struct rio_switch *rswitch;
+	struct rio_dev *rdev;
+	int i;
+	u8 sport;
+
+	list_for_each_entry(rswitch, &net->switches, node) {
+		rdev = sw_to_rio_dev(rswitch);
+
+		rio_lock_device(net->hport, rdev->destid,
+				rdev->hopcount, 1000);
+		for (i = 0;
+		     i < RIO_MAX_ROUTE_ENTRIES(net->hport->sys_size);
+		     i++) {
+			if (rio_route_get_entry(rdev, RIO_GLOBAL_TABLE,
+						i, &sport, 0) < 0)
+				continue;
+			rswitch->route_table[i] = sport;
+		}
+
+		rio_unlock_device(net->hport, rdev->destid, rdev->hopcount);
+	}
+}
+
+/**
+ * rio_disc_mport- Start discovery through a master port
+ * @mport: Master port to send transactions
+ * @flags: discovery control flags
+ *
+ * Starts the discovery process. If we have an active link,
+ * then wait for the signal that enumeration is complete (if wait
+ * is allowed).
+ * When enumeration completion is signaled, start recursive
+ * peer discovery. Returns %0 if discovery succeeds or %-EBUSY
+ * on failure.
+ */
+static int rio_disc_mport(struct rio_mport *mport, u32 flags)
+{
+	struct rio_net *net = NULL;
+	unsigned long to_end;
+
+	printk(KERN_INFO "RIO: discover master port %d, %s\n", mport->id,
+	       mport->name);
+
+	/* If master port has an active link, allocate net and discover peers */
+	if (rio_mport_is_active(mport)) {
+		if (rio_enum_complete(mport))
+			goto enum_done;
+		else if (flags & RIO_SCAN_ENUM_NO_WAIT)
+			return -EAGAIN;
+
+		pr_debug("RIO: wait for enumeration to complete...\n");
+
+		to_end = jiffies + CONFIG_RAPIDIO_DISC_TIMEOUT * HZ;
+		while (time_before(jiffies, to_end)) {
+			if (rio_enum_complete(mport))
+				goto enum_done;
+			msleep(10);
+		}
+
+		pr_debug("RIO: discovery timeout on mport %d %s\n",
+			 mport->id, mport->name);
+		goto bail;
+enum_done:
+		pr_debug("RIO: ... enumeration done\n");
+
+		net = rio_alloc_net(mport, 0, 0);
+		if (!net) {
+			printk(KERN_ERR "RIO: Failed to allocate new net\n");
+			goto bail;
+		}
+
+		/* Read DestID assigned by enumerator */
+		rio_local_read_config_32(mport, RIO_DID_CSR,
+					 &mport->host_deviceid);
+		mport->host_deviceid = RIO_GET_DID(mport->sys_size,
+						   mport->host_deviceid);
+
+		if (rio_disc_peer(net, mport, RIO_ANY_DESTID(mport->sys_size),
+					0, NULL, 0) < 0) {
+			printk(KERN_INFO
+			       "RIO: master port %d device has failed discovery\n",
+			       mport->id);
+			goto bail;
+		}
+
+		rio_build_route_tables(net);
+	}
+
+	return 0;
+bail:
+	return -EBUSY;
+}
+
+static struct rio_scan rio_scan_ops = {
+	.owner = THIS_MODULE,
+	.enumerate = rio_enum_mport,
+	.discover = rio_disc_mport,
+};
+
+static bool scan;
+module_param(scan, bool, 0);
+MODULE_PARM_DESC(scan, "Start RapidIO network enumeration/discovery "
+			"(default = 0)");
+
+/**
+ * rio_basic_attach:
+ *
+ * When this enumeration/discovery method is loaded as a module this function
+ * registers its specific enumeration and discover routines for all available
+ * RapidIO mport devices. The "scan" command line parameter controls ability of
+ * the module to start RapidIO enumeration/discovery automatically.
+ *
+ * Returns 0 for success or -EIO if unable to register itself.
+ *
+ * This enumeration/discovery method cannot be unloaded and therefore does not
+ * provide a matching cleanup_module routine.
+ */
+
+static int __init rio_basic_attach(void)
+{
+	if (rio_register_scan(RIO_MPORT_ANY, &rio_scan_ops))
+		return -EIO;
+	if (scan)
+		rio_init_mports();
+	return 0;
+}
+
+late_initcall(rio_basic_attach);
+
+MODULE_DESCRIPTION("Basic RapidIO enumeration/discovery");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/rapidio/rio-sysfs.c b/kernel/drivers/rapidio/rio-sysfs.c
new file mode 100644
index 000000000..cdb005c00
--- /dev/null
+++ b/kernel/drivers/rapidio/rio-sysfs.c
@@ -0,0 +1,383 @@
+/*
+ * RapidIO sysfs attributes and support
+ *
+ * Copyright 2005 MontaVista Software, Inc.
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/rio.h>
+#include <linux/rio_drv.h>
+#include <linux/stat.h>
+#include <linux/capability.h>
+
+#include "rio.h"
+
+/* Sysfs support */
+#define rio_config_attr(field, format_string)					\
+static ssize_t								\
+field##_show(struct device *dev, struct device_attribute *attr, char *buf)			\
+{									\
+	struct rio_dev *rdev = to_rio_dev(dev);				\
+									\
+	return sprintf(buf, format_string, rdev->field);		\
+}									\
+static DEVICE_ATTR_RO(field);
+
+rio_config_attr(did, "0x%04x\n");
+rio_config_attr(vid, "0x%04x\n");
+rio_config_attr(device_rev, "0x%08x\n");
+rio_config_attr(asm_did, "0x%04x\n");
+rio_config_attr(asm_vid, "0x%04x\n");
+rio_config_attr(asm_rev, "0x%04x\n");
+rio_config_attr(destid, "0x%04x\n");
+rio_config_attr(hopcount, "0x%02x\n");
+
+static ssize_t routes_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct rio_dev *rdev = to_rio_dev(dev);
+	char *str = buf;
+	int i;
+
+	for (i = 0; i < RIO_MAX_ROUTE_ENTRIES(rdev->net->hport->sys_size);
+			i++) {
+		if (rdev->rswitch->route_table[i] == RIO_INVALID_ROUTE)
+			continue;
+		str +=
+		    sprintf(str, "%04x %02x\n", i,
+			    rdev->rswitch->route_table[i]);
+	}
+
+	return (str - buf);
+}
+static DEVICE_ATTR_RO(routes);
+
+static ssize_t lprev_show(struct device *dev,
+			  struct device_attribute *attr, char *buf)
+{
+	struct rio_dev *rdev = to_rio_dev(dev);
+
+	return sprintf(buf, "%s\n",
+			(rdev->prev) ? rio_name(rdev->prev) : "root");
+}
+static DEVICE_ATTR_RO(lprev);
+
+static ssize_t lnext_show(struct device *dev,
+			  struct device_attribute *attr, char *buf)
+{
+	struct rio_dev *rdev = to_rio_dev(dev);
+	char *str = buf;
+	int i;
+
+	if (rdev->pef & RIO_PEF_SWITCH) {
+		for (i = 0; i < RIO_GET_TOTAL_PORTS(rdev->swpinfo); i++) {
+			if (rdev->rswitch->nextdev[i])
+				str += sprintf(str, "%s\n",
+					rio_name(rdev->rswitch->nextdev[i]));
+			else
+				str += sprintf(str, "null\n");
+		}
+	}
+
+	return str - buf;
+}
+static DEVICE_ATTR_RO(lnext);
+
+static ssize_t modalias_show(struct device *dev,
+			     struct device_attribute *attr, char *buf)
+{
+	struct rio_dev *rdev = to_rio_dev(dev);
+
+	return sprintf(buf, "rapidio:v%04Xd%04Xav%04Xad%04X\n",
+		       rdev->vid, rdev->did, rdev->asm_vid, rdev->asm_did);
+}
+static DEVICE_ATTR_RO(modalias);
+
+static struct attribute *rio_dev_attrs[] = {
+	&dev_attr_did.attr,
+	&dev_attr_vid.attr,
+	&dev_attr_device_rev.attr,
+	&dev_attr_asm_did.attr,
+	&dev_attr_asm_vid.attr,
+	&dev_attr_asm_rev.attr,
+	&dev_attr_lprev.attr,
+	&dev_attr_destid.attr,
+	&dev_attr_modalias.attr,
+	NULL,
+};
+
+static const struct attribute_group rio_dev_group = {
+	.attrs = rio_dev_attrs,
+};
+
+const struct attribute_group *rio_dev_groups[] = {
+	&rio_dev_group,
+	NULL,
+};
+
+static ssize_t
+rio_read_config(struct file *filp, struct kobject *kobj,
+		struct bin_attribute *bin_attr,
+		char *buf, loff_t off, size_t count)
+{
+	struct rio_dev *dev =
+	    to_rio_dev(container_of(kobj, struct device, kobj));
+	unsigned int size = 0x100;
+	loff_t init_off = off;
+	u8 *data = (u8 *) buf;
+
+	/* Several chips lock up trying to read undefined config space */
+	if (capable(CAP_SYS_ADMIN))
+		size = RIO_MAINT_SPACE_SZ;
+
+	if (off >= size)
+		return 0;
+	if (off + count > size) {
+		size -= off;
+		count = size;
+	} else {
+		size = count;
+	}
+
+	if ((off & 1) && size) {
+		u8 val;
+		rio_read_config_8(dev, off, &val);
+		data[off - init_off] = val;
+		off++;
+		size--;
+	}
+
+	if ((off & 3) && size > 2) {
+		u16 val;
+		rio_read_config_16(dev, off, &val);
+		data[off - init_off] = (val >> 8) & 0xff;
+		data[off - init_off + 1] = val & 0xff;
+		off += 2;
+		size -= 2;
+	}
+
+	while (size > 3) {
+		u32 val;
+		rio_read_config_32(dev, off, &val);
+		data[off - init_off] = (val >> 24) & 0xff;
+		data[off - init_off + 1] = (val >> 16) & 0xff;
+		data[off - init_off + 2] = (val >> 8) & 0xff;
+		data[off - init_off + 3] = val & 0xff;
+		off += 4;
+		size -= 4;
+	}
+
+	if (size >= 2) {
+		u16 val;
+		rio_read_config_16(dev, off, &val);
+		data[off - init_off] = (val >> 8) & 0xff;
+		data[off - init_off + 1] = val & 0xff;
+		off += 2;
+		size -= 2;
+	}
+
+	if (size > 0) {
+		u8 val;
+		rio_read_config_8(dev, off, &val);
+		data[off - init_off] = val;
+		off++;
+		--size;
+	}
+
+	return count;
+}
+
+static ssize_t
+rio_write_config(struct file *filp, struct kobject *kobj,
+		 struct bin_attribute *bin_attr,
+		 char *buf, loff_t off, size_t count)
+{
+	struct rio_dev *dev =
+	    to_rio_dev(container_of(kobj, struct device, kobj));
+	unsigned int size = count;
+	loff_t init_off = off;
+	u8 *data = (u8 *) buf;
+
+	if (off >= RIO_MAINT_SPACE_SZ)
+		return 0;
+	if (off + count > RIO_MAINT_SPACE_SZ) {
+		size = RIO_MAINT_SPACE_SZ - off;
+		count = size;
+	}
+
+	if ((off & 1) && size) {
+		rio_write_config_8(dev, off, data[off - init_off]);
+		off++;
+		size--;
+	}
+
+	if ((off & 3) && (size > 2)) {
+		u16 val = data[off - init_off + 1];
+		val |= (u16) data[off - init_off] << 8;
+		rio_write_config_16(dev, off, val);
+		off += 2;
+		size -= 2;
+	}
+
+	while (size > 3) {
+		u32 val = data[off - init_off + 3];
+		val |= (u32) data[off - init_off + 2] << 8;
+		val |= (u32) data[off - init_off + 1] << 16;
+		val |= (u32) data[off - init_off] << 24;
+		rio_write_config_32(dev, off, val);
+		off += 4;
+		size -= 4;
+	}
+
+	if (size >= 2) {
+		u16 val = data[off - init_off + 1];
+		val |= (u16) data[off - init_off] << 8;
+		rio_write_config_16(dev, off, val);
+		off += 2;
+		size -= 2;
+	}
+
+	if (size) {
+		rio_write_config_8(dev, off, data[off - init_off]);
+		off++;
+		--size;
+	}
+
+	return count;
+}
+
+static struct bin_attribute rio_config_attr = {
+	.attr = {
+		 .name = "config",
+		 .mode = S_IRUGO | S_IWUSR,
+		 },
+	.size = RIO_MAINT_SPACE_SZ,
+	.read = rio_read_config,
+	.write = rio_write_config,
+};
+
+/**
+ * rio_create_sysfs_dev_files - create RIO specific sysfs files
+ * @rdev: device whose entries should be created
+ *
+ * Create files when @rdev is added to sysfs.
+ */
+int rio_create_sysfs_dev_files(struct rio_dev *rdev)
+{
+	int err = 0;
+
+	err = device_create_bin_file(&rdev->dev, &rio_config_attr);
+
+	if (!err && (rdev->pef & RIO_PEF_SWITCH)) {
+		err |= device_create_file(&rdev->dev, &dev_attr_routes);
+		err |= device_create_file(&rdev->dev, &dev_attr_lnext);
+		err |= device_create_file(&rdev->dev, &dev_attr_hopcount);
+	}
+
+	if (err)
+		pr_warning("RIO: Failed to create attribute file(s) for %s\n",
+			   rio_name(rdev));
+
+	return err;
+}
+
+/**
+ * rio_remove_sysfs_dev_files - cleanup RIO specific sysfs files
+ * @rdev: device whose entries we should free
+ *
+ * Cleanup when @rdev is removed from sysfs.
+ */
+void rio_remove_sysfs_dev_files(struct rio_dev *rdev)
+{
+	device_remove_bin_file(&rdev->dev, &rio_config_attr);
+	if (rdev->pef & RIO_PEF_SWITCH) {
+		device_remove_file(&rdev->dev, &dev_attr_routes);
+		device_remove_file(&rdev->dev, &dev_attr_lnext);
+		device_remove_file(&rdev->dev, &dev_attr_hopcount);
+	}
+}
+
+static ssize_t bus_scan_store(struct bus_type *bus, const char *buf,
+				size_t count)
+{
+	long val;
+	int rc;
+
+	if (kstrtol(buf, 0, &val) < 0)
+		return -EINVAL;
+
+	if (val == RIO_MPORT_ANY) {
+		rc = rio_init_mports();
+		goto exit;
+	}
+
+	if (val < 0 || val >= RIO_MAX_MPORTS)
+		return -EINVAL;
+
+	rc = rio_mport_scan((int)val);
+exit:
+	if (!rc)
+		rc = count;
+
+	return rc;
+}
+static BUS_ATTR(scan, (S_IWUSR|S_IWGRP), NULL, bus_scan_store);
+
+static struct attribute *rio_bus_attrs[] = {
+	&bus_attr_scan.attr,
+	NULL,
+};
+
+static const struct attribute_group rio_bus_group = {
+	.attrs = rio_bus_attrs,
+};
+
+const struct attribute_group *rio_bus_groups[] = {
+	&rio_bus_group,
+	NULL,
+};
+
+static ssize_t
+port_destid_show(struct device *dev, struct device_attribute *attr,
+		 char *buf)
+{
+	struct rio_mport *mport = to_rio_mport(dev);
+
+	if (mport)
+		return sprintf(buf, "0x%04x\n", mport->host_deviceid);
+	else
+		return -ENODEV;
+}
+static DEVICE_ATTR_RO(port_destid);
+
+static ssize_t sys_size_show(struct device *dev, struct device_attribute *attr,
+			   char *buf)
+{
+	struct rio_mport *mport = to_rio_mport(dev);
+
+	if (mport)
+		return sprintf(buf, "%u\n", mport->sys_size);
+	else
+		return -ENODEV;
+}
+static DEVICE_ATTR_RO(sys_size);
+
+static struct attribute *rio_mport_attrs[] = {
+	&dev_attr_port_destid.attr,
+	&dev_attr_sys_size.attr,
+	NULL,
+};
+
+static const struct attribute_group rio_mport_group = {
+	.attrs = rio_mport_attrs,
+};
+
+const struct attribute_group *rio_mport_groups[] = {
+	&rio_mport_group,
+	NULL,
+};
diff --git a/kernel/drivers/rapidio/rio.c b/kernel/drivers/rapidio/rio.c
new file mode 100644
index 000000000..d7b87c64b
--- /dev/null
+++ b/kernel/drivers/rapidio/rio.c
@@ -0,0 +1,1969 @@
+/*
+ * RapidIO interconnect services
+ * (RapidIO Interconnect Specification, http://www.rapidio.org)
+ *
+ * Copyright 2005 MontaVista Software, Inc.
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * Copyright 2009 - 2013 Integrated Device Technology, Inc.
+ * Alex Bounine <alexandre.bounine@idt.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/rio.h>
+#include <linux/rio_drv.h>
+#include <linux/rio_ids.h>
+#include <linux/rio_regs.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+
+#include "rio.h"
+
+MODULE_DESCRIPTION("RapidIO Subsystem Core");
+MODULE_AUTHOR("Matt Porter <mporter@kernel.crashing.org>");
+MODULE_AUTHOR("Alexandre Bounine <alexandre.bounine@idt.com>");
+MODULE_LICENSE("GPL");
+
+static int hdid[RIO_MAX_MPORTS];
+static int ids_num;
+module_param_array(hdid, int, &ids_num, 0);
+MODULE_PARM_DESC(hdid,
+	"Destination ID assignment to local RapidIO controllers");
+
+static LIST_HEAD(rio_devices);
+static DEFINE_SPINLOCK(rio_global_list_lock);
+
+static LIST_HEAD(rio_mports);
+static LIST_HEAD(rio_scans);
+static DEFINE_MUTEX(rio_mport_list_lock);
+static unsigned char next_portid;
+static DEFINE_SPINLOCK(rio_mmap_lock);
+
+/**
+ * rio_local_get_device_id - Get the base/extended device id for a port
+ * @port: RIO master port from which to get the deviceid
+ *
+ * Reads the base/extended device id from the local device
+ * implementing the master port. Returns the 8/16-bit device
+ * id.
+ */
+u16 rio_local_get_device_id(struct rio_mport *port)
+{
+	u32 result;
+
+	rio_local_read_config_32(port, RIO_DID_CSR, &result);
+
+	return (RIO_GET_DID(port->sys_size, result));
+}
+
+/**
+ * rio_add_device- Adds a RIO device to the device model
+ * @rdev: RIO device
+ *
+ * Adds the RIO device to the global device list and adds the RIO
+ * device to the RIO device list.  Creates the generic sysfs nodes
+ * for an RIO device.
+ */
+int rio_add_device(struct rio_dev *rdev)
+{
+	int err;
+
+	err = device_add(&rdev->dev);
+	if (err)
+		return err;
+
+	spin_lock(&rio_global_list_lock);
+	list_add_tail(&rdev->global_list, &rio_devices);
+	spin_unlock(&rio_global_list_lock);
+
+	rio_create_sysfs_dev_files(rdev);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rio_add_device);
+
+/**
+ * rio_request_inb_mbox - request inbound mailbox service
+ * @mport: RIO master port from which to allocate the mailbox resource
+ * @dev_id: Device specific pointer to pass on event
+ * @mbox: Mailbox number to claim
+ * @entries: Number of entries in inbound mailbox queue
+ * @minb: Callback to execute when inbound message is received
+ *
+ * Requests ownership of an inbound mailbox resource and binds
+ * a callback function to the resource. Returns %0 on success.
+ */
+int rio_request_inb_mbox(struct rio_mport *mport,
+			 void *dev_id,
+			 int mbox,
+			 int entries,
+			 void (*minb) (struct rio_mport * mport, void *dev_id, int mbox,
+				       int slot))
+{
+	int rc = -ENOSYS;
+	struct resource *res;
+
+	if (mport->ops->open_inb_mbox == NULL)
+		goto out;
+
+	res = kmalloc(sizeof(struct resource), GFP_KERNEL);
+
+	if (res) {
+		rio_init_mbox_res(res, mbox, mbox);
+
+		/* Make sure this mailbox isn't in use */
+		if ((rc =
+		     request_resource(&mport->riores[RIO_INB_MBOX_RESOURCE],
+				      res)) < 0) {
+			kfree(res);
+			goto out;
+		}
+
+		mport->inb_msg[mbox].res = res;
+
+		/* Hook the inbound message callback */
+		mport->inb_msg[mbox].mcback = minb;
+
+		rc = mport->ops->open_inb_mbox(mport, dev_id, mbox, entries);
+	} else
+		rc = -ENOMEM;
+
+      out:
+	return rc;
+}
+
+/**
+ * rio_release_inb_mbox - release inbound mailbox message service
+ * @mport: RIO master port from which to release the mailbox resource
+ * @mbox: Mailbox number to release
+ *
+ * Releases ownership of an inbound mailbox resource. Returns 0
+ * if the request has been satisfied.
+ */
+int rio_release_inb_mbox(struct rio_mport *mport, int mbox)
+{
+	if (mport->ops->close_inb_mbox) {
+		mport->ops->close_inb_mbox(mport, mbox);
+
+		/* Release the mailbox resource */
+		return release_resource(mport->inb_msg[mbox].res);
+	} else
+		return -ENOSYS;
+}
+
+/**
+ * rio_request_outb_mbox - request outbound mailbox service
+ * @mport: RIO master port from which to allocate the mailbox resource
+ * @dev_id: Device specific pointer to pass on event
+ * @mbox: Mailbox number to claim
+ * @entries: Number of entries in outbound mailbox queue
+ * @moutb: Callback to execute when outbound message is sent
+ *
+ * Requests ownership of an outbound mailbox resource and binds
+ * a callback function to the resource. Returns 0 on success.
+ */
+int rio_request_outb_mbox(struct rio_mport *mport,
+			  void *dev_id,
+			  int mbox,
+			  int entries,
+			  void (*moutb) (struct rio_mport * mport, void *dev_id, int mbox, int slot))
+{
+	int rc = -ENOSYS;
+	struct resource *res;
+
+	if (mport->ops->open_outb_mbox == NULL)
+		goto out;
+
+	res = kmalloc(sizeof(struct resource), GFP_KERNEL);
+
+	if (res) {
+		rio_init_mbox_res(res, mbox, mbox);
+
+		/* Make sure this outbound mailbox isn't in use */
+		if ((rc =
+		     request_resource(&mport->riores[RIO_OUTB_MBOX_RESOURCE],
+				      res)) < 0) {
+			kfree(res);
+			goto out;
+		}
+
+		mport->outb_msg[mbox].res = res;
+
+		/* Hook the inbound message callback */
+		mport->outb_msg[mbox].mcback = moutb;
+
+		rc = mport->ops->open_outb_mbox(mport, dev_id, mbox, entries);
+	} else
+		rc = -ENOMEM;
+
+      out:
+	return rc;
+}
+
+/**
+ * rio_release_outb_mbox - release outbound mailbox message service
+ * @mport: RIO master port from which to release the mailbox resource
+ * @mbox: Mailbox number to release
+ *
+ * Releases ownership of an inbound mailbox resource. Returns 0
+ * if the request has been satisfied.
+ */
+int rio_release_outb_mbox(struct rio_mport *mport, int mbox)
+{
+	if (mport->ops->close_outb_mbox) {
+		mport->ops->close_outb_mbox(mport, mbox);
+
+		/* Release the mailbox resource */
+		return release_resource(mport->outb_msg[mbox].res);
+	} else
+		return -ENOSYS;
+}
+
+/**
+ * rio_setup_inb_dbell - bind inbound doorbell callback
+ * @mport: RIO master port to bind the doorbell callback
+ * @dev_id: Device specific pointer to pass on event
+ * @res: Doorbell message resource
+ * @dinb: Callback to execute when doorbell is received
+ *
+ * Adds a doorbell resource/callback pair into a port's
+ * doorbell event list. Returns 0 if the request has been
+ * satisfied.
+ */
+static int
+rio_setup_inb_dbell(struct rio_mport *mport, void *dev_id, struct resource *res,
+		    void (*dinb) (struct rio_mport * mport, void *dev_id, u16 src, u16 dst,
+				  u16 info))
+{
+	int rc = 0;
+	struct rio_dbell *dbell;
+
+	if (!(dbell = kmalloc(sizeof(struct rio_dbell), GFP_KERNEL))) {
+		rc = -ENOMEM;
+		goto out;
+	}
+
+	dbell->res = res;
+	dbell->dinb = dinb;
+	dbell->dev_id = dev_id;
+
+	list_add_tail(&dbell->node, &mport->dbells);
+
+      out:
+	return rc;
+}
+
+/**
+ * rio_request_inb_dbell - request inbound doorbell message service
+ * @mport: RIO master port from which to allocate the doorbell resource
+ * @dev_id: Device specific pointer to pass on event
+ * @start: Doorbell info range start
+ * @end: Doorbell info range end
+ * @dinb: Callback to execute when doorbell is received
+ *
+ * Requests ownership of an inbound doorbell resource and binds
+ * a callback function to the resource. Returns 0 if the request
+ * has been satisfied.
+ */
+int rio_request_inb_dbell(struct rio_mport *mport,
+			  void *dev_id,
+			  u16 start,
+			  u16 end,
+			  void (*dinb) (struct rio_mport * mport, void *dev_id, u16 src,
+					u16 dst, u16 info))
+{
+	int rc = 0;
+
+	struct resource *res = kmalloc(sizeof(struct resource), GFP_KERNEL);
+
+	if (res) {
+		rio_init_dbell_res(res, start, end);
+
+		/* Make sure these doorbells aren't in use */
+		if ((rc =
+		     request_resource(&mport->riores[RIO_DOORBELL_RESOURCE],
+				      res)) < 0) {
+			kfree(res);
+			goto out;
+		}
+
+		/* Hook the doorbell callback */
+		rc = rio_setup_inb_dbell(mport, dev_id, res, dinb);
+	} else
+		rc = -ENOMEM;
+
+      out:
+	return rc;
+}
+
+/**
+ * rio_release_inb_dbell - release inbound doorbell message service
+ * @mport: RIO master port from which to release the doorbell resource
+ * @start: Doorbell info range start
+ * @end: Doorbell info range end
+ *
+ * Releases ownership of an inbound doorbell resource and removes
+ * callback from the doorbell event list. Returns 0 if the request
+ * has been satisfied.
+ */
+int rio_release_inb_dbell(struct rio_mport *mport, u16 start, u16 end)
+{
+	int rc = 0, found = 0;
+	struct rio_dbell *dbell;
+
+	list_for_each_entry(dbell, &mport->dbells, node) {
+		if ((dbell->res->start == start) && (dbell->res->end == end)) {
+			found = 1;
+			break;
+		}
+	}
+
+	/* If we can't find an exact match, fail */
+	if (!found) {
+		rc = -EINVAL;
+		goto out;
+	}
+
+	/* Delete from list */
+	list_del(&dbell->node);
+
+	/* Release the doorbell resource */
+	rc = release_resource(dbell->res);
+
+	/* Free the doorbell event */
+	kfree(dbell);
+
+      out:
+	return rc;
+}
+
+/**
+ * rio_request_outb_dbell - request outbound doorbell message range
+ * @rdev: RIO device from which to allocate the doorbell resource
+ * @start: Doorbell message range start
+ * @end: Doorbell message range end
+ *
+ * Requests ownership of a doorbell message range. Returns a resource
+ * if the request has been satisfied or %NULL on failure.
+ */
+struct resource *rio_request_outb_dbell(struct rio_dev *rdev, u16 start,
+					u16 end)
+{
+	struct resource *res = kmalloc(sizeof(struct resource), GFP_KERNEL);
+
+	if (res) {
+		rio_init_dbell_res(res, start, end);
+
+		/* Make sure these doorbells aren't in use */
+		if (request_resource(&rdev->riores[RIO_DOORBELL_RESOURCE], res)
+		    < 0) {
+			kfree(res);
+			res = NULL;
+		}
+	}
+
+	return res;
+}
+
+/**
+ * rio_release_outb_dbell - release outbound doorbell message range
+ * @rdev: RIO device from which to release the doorbell resource
+ * @res: Doorbell resource to be freed
+ *
+ * Releases ownership of a doorbell message range. Returns 0 if the
+ * request has been satisfied.
+ */
+int rio_release_outb_dbell(struct rio_dev *rdev, struct resource *res)
+{
+	int rc = release_resource(res);
+
+	kfree(res);
+
+	return rc;
+}
+
+/**
+ * rio_request_inb_pwrite - request inbound port-write message service
+ * @rdev: RIO device to which register inbound port-write callback routine
+ * @pwcback: Callback routine to execute when port-write is received
+ *
+ * Binds a port-write callback function to the RapidIO device.
+ * Returns 0 if the request has been satisfied.
+ */
+int rio_request_inb_pwrite(struct rio_dev *rdev,
+	int (*pwcback)(struct rio_dev *rdev, union rio_pw_msg *msg, int step))
+{
+	int rc = 0;
+
+	spin_lock(&rio_global_list_lock);
+	if (rdev->pwcback != NULL)
+		rc = -ENOMEM;
+	else
+		rdev->pwcback = pwcback;
+
+	spin_unlock(&rio_global_list_lock);
+	return rc;
+}
+EXPORT_SYMBOL_GPL(rio_request_inb_pwrite);
+
+/**
+ * rio_release_inb_pwrite - release inbound port-write message service
+ * @rdev: RIO device which registered for inbound port-write callback
+ *
+ * Removes callback from the rio_dev structure. Returns 0 if the request
+ * has been satisfied.
+ */
+int rio_release_inb_pwrite(struct rio_dev *rdev)
+{
+	int rc = -ENOMEM;
+
+	spin_lock(&rio_global_list_lock);
+	if (rdev->pwcback) {
+		rdev->pwcback = NULL;
+		rc = 0;
+	}
+
+	spin_unlock(&rio_global_list_lock);
+	return rc;
+}
+EXPORT_SYMBOL_GPL(rio_release_inb_pwrite);
+
+/**
+ * rio_map_inb_region -- Map inbound memory region.
+ * @mport: Master port.
+ * @local: physical address of memory region to be mapped
+ * @rbase: RIO base address assigned to this window
+ * @size: Size of the memory region
+ * @rflags: Flags for mapping.
+ *
+ * Return: 0 -- Success.
+ *
+ * This function will create the mapping from RIO space to local memory.
+ */
+int rio_map_inb_region(struct rio_mport *mport, dma_addr_t local,
+			u64 rbase, u32 size, u32 rflags)
+{
+	int rc = 0;
+	unsigned long flags;
+
+	if (!mport->ops->map_inb)
+		return -1;
+	spin_lock_irqsave(&rio_mmap_lock, flags);
+	rc = mport->ops->map_inb(mport, local, rbase, size, rflags);
+	spin_unlock_irqrestore(&rio_mmap_lock, flags);
+	return rc;
+}
+EXPORT_SYMBOL_GPL(rio_map_inb_region);
+
+/**
+ * rio_unmap_inb_region -- Unmap the inbound memory region
+ * @mport: Master port
+ * @lstart: physical address of memory region to be unmapped
+ */
+void rio_unmap_inb_region(struct rio_mport *mport, dma_addr_t lstart)
+{
+	unsigned long flags;
+	if (!mport->ops->unmap_inb)
+		return;
+	spin_lock_irqsave(&rio_mmap_lock, flags);
+	mport->ops->unmap_inb(mport, lstart);
+	spin_unlock_irqrestore(&rio_mmap_lock, flags);
+}
+EXPORT_SYMBOL_GPL(rio_unmap_inb_region);
+
+/**
+ * rio_mport_get_physefb - Helper function that returns register offset
+ *                      for Physical Layer Extended Features Block.
+ * @port: Master port to issue transaction
+ * @local: Indicate a local master port or remote device access
+ * @destid: Destination ID of the device
+ * @hopcount: Number of switch hops to the device
+ */
+u32
+rio_mport_get_physefb(struct rio_mport *port, int local,
+		      u16 destid, u8 hopcount)
+{
+	u32 ext_ftr_ptr;
+	u32 ftr_header;
+
+	ext_ftr_ptr = rio_mport_get_efb(port, local, destid, hopcount, 0);
+
+	while (ext_ftr_ptr)  {
+		if (local)
+			rio_local_read_config_32(port, ext_ftr_ptr,
+						 &ftr_header);
+		else
+			rio_mport_read_config_32(port, destid, hopcount,
+						 ext_ftr_ptr, &ftr_header);
+
+		ftr_header = RIO_GET_BLOCK_ID(ftr_header);
+		switch (ftr_header) {
+
+		case RIO_EFB_SER_EP_ID_V13P:
+		case RIO_EFB_SER_EP_REC_ID_V13P:
+		case RIO_EFB_SER_EP_FREE_ID_V13P:
+		case RIO_EFB_SER_EP_ID:
+		case RIO_EFB_SER_EP_REC_ID:
+		case RIO_EFB_SER_EP_FREE_ID:
+		case RIO_EFB_SER_EP_FREC_ID:
+
+			return ext_ftr_ptr;
+
+		default:
+			break;
+		}
+
+		ext_ftr_ptr = rio_mport_get_efb(port, local, destid,
+						hopcount, ext_ftr_ptr);
+	}
+
+	return ext_ftr_ptr;
+}
+EXPORT_SYMBOL_GPL(rio_mport_get_physefb);
+
+/**
+ * rio_get_comptag - Begin or continue searching for a RIO device by component tag
+ * @comp_tag: RIO component tag to match
+ * @from: Previous RIO device found in search, or %NULL for new search
+ *
+ * Iterates through the list of known RIO devices. If a RIO device is
+ * found with a matching @comp_tag, a pointer to its device
+ * structure is returned. Otherwise, %NULL is returned. A new search
+ * is initiated by passing %NULL to the @from argument. Otherwise, if
+ * @from is not %NULL, searches continue from next device on the global
+ * list.
+ */
+struct rio_dev *rio_get_comptag(u32 comp_tag, struct rio_dev *from)
+{
+	struct list_head *n;
+	struct rio_dev *rdev;
+
+	spin_lock(&rio_global_list_lock);
+	n = from ? from->global_list.next : rio_devices.next;
+
+	while (n && (n != &rio_devices)) {
+		rdev = rio_dev_g(n);
+		if (rdev->comp_tag == comp_tag)
+			goto exit;
+		n = n->next;
+	}
+	rdev = NULL;
+exit:
+	spin_unlock(&rio_global_list_lock);
+	return rdev;
+}
+EXPORT_SYMBOL_GPL(rio_get_comptag);
+
+/**
+ * rio_set_port_lockout - Sets/clears LOCKOUT bit (RIO EM 1.3) for a switch port.
+ * @rdev: Pointer to RIO device control structure
+ * @pnum: Switch port number to set LOCKOUT bit
+ * @lock: Operation : set (=1) or clear (=0)
+ */
+int rio_set_port_lockout(struct rio_dev *rdev, u32 pnum, int lock)
+{
+	u32 regval;
+
+	rio_read_config_32(rdev,
+				 rdev->phys_efptr + RIO_PORT_N_CTL_CSR(pnum),
+				 &regval);
+	if (lock)
+		regval |= RIO_PORT_N_CTL_LOCKOUT;
+	else
+		regval &= ~RIO_PORT_N_CTL_LOCKOUT;
+
+	rio_write_config_32(rdev,
+				  rdev->phys_efptr + RIO_PORT_N_CTL_CSR(pnum),
+				  regval);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rio_set_port_lockout);
+
+/**
+ * rio_enable_rx_tx_port - enable input receiver and output transmitter of
+ * given port
+ * @port: Master port associated with the RIO network
+ * @local: local=1 select local port otherwise a far device is reached
+ * @destid: Destination ID of the device to check host bit
+ * @hopcount: Number of hops to reach the target
+ * @port_num: Port (-number on switch) to enable on a far end device
+ *
+ * Returns 0 or 1 from on General Control Command and Status Register
+ * (EXT_PTR+0x3C)
+ */
+int rio_enable_rx_tx_port(struct rio_mport *port,
+			  int local, u16 destid,
+			  u8 hopcount, u8 port_num)
+{
+#ifdef CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS
+	u32 regval;
+	u32 ext_ftr_ptr;
+
+	/*
+	* enable rx input tx output port
+	*/
+	pr_debug("rio_enable_rx_tx_port(local = %d, destid = %d, hopcount = "
+		 "%d, port_num = %d)\n", local, destid, hopcount, port_num);
+
+	ext_ftr_ptr = rio_mport_get_physefb(port, local, destid, hopcount);
+
+	if (local) {
+		rio_local_read_config_32(port, ext_ftr_ptr +
+				RIO_PORT_N_CTL_CSR(0),
+				&regval);
+	} else {
+		if (rio_mport_read_config_32(port, destid, hopcount,
+		ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), &regval) < 0)
+			return -EIO;
+	}
+
+	if (regval & RIO_PORT_N_CTL_P_TYP_SER) {
+		/* serial */
+		regval = regval | RIO_PORT_N_CTL_EN_RX_SER
+				| RIO_PORT_N_CTL_EN_TX_SER;
+	} else {
+		/* parallel */
+		regval = regval | RIO_PORT_N_CTL_EN_RX_PAR
+				| RIO_PORT_N_CTL_EN_TX_PAR;
+	}
+
+	if (local) {
+		rio_local_write_config_32(port, ext_ftr_ptr +
+					  RIO_PORT_N_CTL_CSR(0), regval);
+	} else {
+		if (rio_mport_write_config_32(port, destid, hopcount,
+		    ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), regval) < 0)
+			return -EIO;
+	}
+#endif
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rio_enable_rx_tx_port);
+
+
+/**
+ * rio_chk_dev_route - Validate route to the specified device.
+ * @rdev:  RIO device failed to respond
+ * @nrdev: Last active device on the route to rdev
+ * @npnum: nrdev's port number on the route to rdev
+ *
+ * Follows a route to the specified RIO device to determine the last available
+ * device (and corresponding RIO port) on the route.
+ */
+static int
+rio_chk_dev_route(struct rio_dev *rdev, struct rio_dev **nrdev, int *npnum)
+{
+	u32 result;
+	int p_port, rc = -EIO;
+	struct rio_dev *prev = NULL;
+
+	/* Find switch with failed RIO link */
+	while (rdev->prev && (rdev->prev->pef & RIO_PEF_SWITCH)) {
+		if (!rio_read_config_32(rdev->prev, RIO_DEV_ID_CAR, &result)) {
+			prev = rdev->prev;
+			break;
+		}
+		rdev = rdev->prev;
+	}
+
+	if (prev == NULL)
+		goto err_out;
+
+	p_port = prev->rswitch->route_table[rdev->destid];
+
+	if (p_port != RIO_INVALID_ROUTE) {
+		pr_debug("RIO: link failed on [%s]-P%d\n",
+			 rio_name(prev), p_port);
+		*nrdev = prev;
+		*npnum = p_port;
+		rc = 0;
+	} else
+		pr_debug("RIO: failed to trace route to %s\n", rio_name(rdev));
+err_out:
+	return rc;
+}
+
+/**
+ * rio_mport_chk_dev_access - Validate access to the specified device.
+ * @mport: Master port to send transactions
+ * @destid: Device destination ID in network
+ * @hopcount: Number of hops into the network
+ */
+int
+rio_mport_chk_dev_access(struct rio_mport *mport, u16 destid, u8 hopcount)
+{
+	int i = 0;
+	u32 tmp;
+
+	while (rio_mport_read_config_32(mport, destid, hopcount,
+					RIO_DEV_ID_CAR, &tmp)) {
+		i++;
+		if (i == RIO_MAX_CHK_RETRY)
+			return -EIO;
+		mdelay(1);
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rio_mport_chk_dev_access);
+
+/**
+ * rio_chk_dev_access - Validate access to the specified device.
+ * @rdev: Pointer to RIO device control structure
+ */
+static int rio_chk_dev_access(struct rio_dev *rdev)
+{
+	return rio_mport_chk_dev_access(rdev->net->hport,
+					rdev->destid, rdev->hopcount);
+}
+
+/**
+ * rio_get_input_status - Sends a Link-Request/Input-Status control symbol and
+ *                        returns link-response (if requested).
+ * @rdev: RIO devive to issue Input-status command
+ * @pnum: Device port number to issue the command
+ * @lnkresp: Response from a link partner
+ */
+static int
+rio_get_input_status(struct rio_dev *rdev, int pnum, u32 *lnkresp)
+{
+	u32 regval;
+	int checkcount;
+
+	if (lnkresp) {
+		/* Read from link maintenance response register
+		 * to clear valid bit */
+		rio_read_config_32(rdev,
+			rdev->phys_efptr + RIO_PORT_N_MNT_RSP_CSR(pnum),
+			&regval);
+		udelay(50);
+	}
+
+	/* Issue Input-status command */
+	rio_write_config_32(rdev,
+		rdev->phys_efptr + RIO_PORT_N_MNT_REQ_CSR(pnum),
+		RIO_MNT_REQ_CMD_IS);
+
+	/* Exit if the response is not expected */
+	if (lnkresp == NULL)
+		return 0;
+
+	checkcount = 3;
+	while (checkcount--) {
+		udelay(50);
+		rio_read_config_32(rdev,
+			rdev->phys_efptr + RIO_PORT_N_MNT_RSP_CSR(pnum),
+			&regval);
+		if (regval & RIO_PORT_N_MNT_RSP_RVAL) {
+			*lnkresp = regval;
+			return 0;
+		}
+	}
+
+	return -EIO;
+}
+
+/**
+ * rio_clr_err_stopped - Clears port Error-stopped states.
+ * @rdev: Pointer to RIO device control structure
+ * @pnum: Switch port number to clear errors
+ * @err_status: port error status (if 0 reads register from device)
+ */
+static int rio_clr_err_stopped(struct rio_dev *rdev, u32 pnum, u32 err_status)
+{
+	struct rio_dev *nextdev = rdev->rswitch->nextdev[pnum];
+	u32 regval;
+	u32 far_ackid, far_linkstat, near_ackid;
+
+	if (err_status == 0)
+		rio_read_config_32(rdev,
+			rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(pnum),
+			&err_status);
+
+	if (err_status & RIO_PORT_N_ERR_STS_PW_OUT_ES) {
+		pr_debug("RIO_EM: servicing Output Error-Stopped state\n");
+		/*
+		 * Send a Link-Request/Input-Status control symbol
+		 */
+		if (rio_get_input_status(rdev, pnum, &regval)) {
+			pr_debug("RIO_EM: Input-status response timeout\n");
+			goto rd_err;
+		}
+
+		pr_debug("RIO_EM: SP%d Input-status response=0x%08x\n",
+			 pnum, regval);
+		far_ackid = (regval & RIO_PORT_N_MNT_RSP_ASTAT) >> 5;
+		far_linkstat = regval & RIO_PORT_N_MNT_RSP_LSTAT;
+		rio_read_config_32(rdev,
+			rdev->phys_efptr + RIO_PORT_N_ACK_STS_CSR(pnum),
+			&regval);
+		pr_debug("RIO_EM: SP%d_ACK_STS_CSR=0x%08x\n", pnum, regval);
+		near_ackid = (regval & RIO_PORT_N_ACK_INBOUND) >> 24;
+		pr_debug("RIO_EM: SP%d far_ackID=0x%02x far_linkstat=0x%02x" \
+			 " near_ackID=0x%02x\n",
+			pnum, far_ackid, far_linkstat, near_ackid);
+
+		/*
+		 * If required, synchronize ackIDs of near and
+		 * far sides.
+		 */
+		if ((far_ackid != ((regval & RIO_PORT_N_ACK_OUTSTAND) >> 8)) ||
+		    (far_ackid != (regval & RIO_PORT_N_ACK_OUTBOUND))) {
+			/* Align near outstanding/outbound ackIDs with
+			 * far inbound.
+			 */
+			rio_write_config_32(rdev,
+				rdev->phys_efptr + RIO_PORT_N_ACK_STS_CSR(pnum),
+				(near_ackid << 24) |
+					(far_ackid << 8) | far_ackid);
+			/* Align far outstanding/outbound ackIDs with
+			 * near inbound.
+			 */
+			far_ackid++;
+			if (nextdev)
+				rio_write_config_32(nextdev,
+					nextdev->phys_efptr +
+					RIO_PORT_N_ACK_STS_CSR(RIO_GET_PORT_NUM(nextdev->swpinfo)),
+					(far_ackid << 24) |
+					(near_ackid << 8) | near_ackid);
+			else
+				pr_debug("RIO_EM: Invalid nextdev pointer (NULL)\n");
+		}
+rd_err:
+		rio_read_config_32(rdev,
+			rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(pnum),
+			&err_status);
+		pr_debug("RIO_EM: SP%d_ERR_STS_CSR=0x%08x\n", pnum, err_status);
+	}
+
+	if ((err_status & RIO_PORT_N_ERR_STS_PW_INP_ES) && nextdev) {
+		pr_debug("RIO_EM: servicing Input Error-Stopped state\n");
+		rio_get_input_status(nextdev,
+				     RIO_GET_PORT_NUM(nextdev->swpinfo), NULL);
+		udelay(50);
+
+		rio_read_config_32(rdev,
+			rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(pnum),
+			&err_status);
+		pr_debug("RIO_EM: SP%d_ERR_STS_CSR=0x%08x\n", pnum, err_status);
+	}
+
+	return (err_status & (RIO_PORT_N_ERR_STS_PW_OUT_ES |
+			      RIO_PORT_N_ERR_STS_PW_INP_ES)) ? 1 : 0;
+}
+
+/**
+ * rio_inb_pwrite_handler - process inbound port-write message
+ * @pw_msg: pointer to inbound port-write message
+ *
+ * Processes an inbound port-write message. Returns 0 if the request
+ * has been satisfied.
+ */
+int rio_inb_pwrite_handler(union rio_pw_msg *pw_msg)
+{
+	struct rio_dev *rdev;
+	u32 err_status, em_perrdet, em_ltlerrdet;
+	int rc, portnum;
+
+	rdev = rio_get_comptag((pw_msg->em.comptag & RIO_CTAG_UDEVID), NULL);
+	if (rdev == NULL) {
+		/* Device removed or enumeration error */
+		pr_debug("RIO: %s No matching device for CTag 0x%08x\n",
+			__func__, pw_msg->em.comptag);
+		return -EIO;
+	}
+
+	pr_debug("RIO: Port-Write message from %s\n", rio_name(rdev));
+
+#ifdef DEBUG_PW
+	{
+	u32 i;
+	for (i = 0; i < RIO_PW_MSG_SIZE/sizeof(u32);) {
+			pr_debug("0x%02x: %08x %08x %08x %08x\n",
+				 i*4, pw_msg->raw[i], pw_msg->raw[i + 1],
+				 pw_msg->raw[i + 2], pw_msg->raw[i + 3]);
+			i += 4;
+	}
+	}
+#endif
+
+	/* Call an external service function (if such is registered
+	 * for this device). This may be the service for endpoints that send
+	 * device-specific port-write messages. End-point messages expected
+	 * to be handled completely by EP specific device driver.
+	 * For switches rc==0 signals that no standard processing required.
+	 */
+	if (rdev->pwcback != NULL) {
+		rc = rdev->pwcback(rdev, pw_msg, 0);
+		if (rc == 0)
+			return 0;
+	}
+
+	portnum = pw_msg->em.is_port & 0xFF;
+
+	/* Check if device and route to it are functional:
+	 * Sometimes devices may send PW message(s) just before being
+	 * powered down (or link being lost).
+	 */
+	if (rio_chk_dev_access(rdev)) {
+		pr_debug("RIO: device access failed - get link partner\n");
+		/* Scan route to the device and identify failed link.
+		 * This will replace device and port reported in PW message.
+		 * PW message should not be used after this point.
+		 */
+		if (rio_chk_dev_route(rdev, &rdev, &portnum)) {
+			pr_err("RIO: Route trace for %s failed\n",
+				rio_name(rdev));
+			return -EIO;
+		}
+		pw_msg = NULL;
+	}
+
+	/* For End-point devices processing stops here */
+	if (!(rdev->pef & RIO_PEF_SWITCH))
+		return 0;
+
+	if (rdev->phys_efptr == 0) {
+		pr_err("RIO_PW: Bad switch initialization for %s\n",
+			rio_name(rdev));
+		return 0;
+	}
+
+	/*
+	 * Process the port-write notification from switch
+	 */
+	if (rdev->rswitch->ops && rdev->rswitch->ops->em_handle)
+		rdev->rswitch->ops->em_handle(rdev, portnum);
+
+	rio_read_config_32(rdev,
+			rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(portnum),
+			&err_status);
+	pr_debug("RIO_PW: SP%d_ERR_STS_CSR=0x%08x\n", portnum, err_status);
+
+	if (err_status & RIO_PORT_N_ERR_STS_PORT_OK) {
+
+		if (!(rdev->rswitch->port_ok & (1 << portnum))) {
+			rdev->rswitch->port_ok |= (1 << portnum);
+			rio_set_port_lockout(rdev, portnum, 0);
+			/* Schedule Insertion Service */
+			pr_debug("RIO_PW: Device Insertion on [%s]-P%d\n",
+			       rio_name(rdev), portnum);
+		}
+
+		/* Clear error-stopped states (if reported).
+		 * Depending on the link partner state, two attempts
+		 * may be needed for successful recovery.
+		 */
+		if (err_status & (RIO_PORT_N_ERR_STS_PW_OUT_ES |
+				  RIO_PORT_N_ERR_STS_PW_INP_ES)) {
+			if (rio_clr_err_stopped(rdev, portnum, err_status))
+				rio_clr_err_stopped(rdev, portnum, 0);
+		}
+	}  else { /* if (err_status & RIO_PORT_N_ERR_STS_PORT_UNINIT) */
+
+		if (rdev->rswitch->port_ok & (1 << portnum)) {
+			rdev->rswitch->port_ok &= ~(1 << portnum);
+			rio_set_port_lockout(rdev, portnum, 1);
+
+			rio_write_config_32(rdev,
+				rdev->phys_efptr +
+					RIO_PORT_N_ACK_STS_CSR(portnum),
+				RIO_PORT_N_ACK_CLEAR);
+
+			/* Schedule Extraction Service */
+			pr_debug("RIO_PW: Device Extraction on [%s]-P%d\n",
+			       rio_name(rdev), portnum);
+		}
+	}
+
+	rio_read_config_32(rdev,
+		rdev->em_efptr + RIO_EM_PN_ERR_DETECT(portnum), &em_perrdet);
+	if (em_perrdet) {
+		pr_debug("RIO_PW: RIO_EM_P%d_ERR_DETECT=0x%08x\n",
+			 portnum, em_perrdet);
+		/* Clear EM Port N Error Detect CSR */
+		rio_write_config_32(rdev,
+			rdev->em_efptr + RIO_EM_PN_ERR_DETECT(portnum), 0);
+	}
+
+	rio_read_config_32(rdev,
+		rdev->em_efptr + RIO_EM_LTL_ERR_DETECT, &em_ltlerrdet);
+	if (em_ltlerrdet) {
+		pr_debug("RIO_PW: RIO_EM_LTL_ERR_DETECT=0x%08x\n",
+			 em_ltlerrdet);
+		/* Clear EM L/T Layer Error Detect CSR */
+		rio_write_config_32(rdev,
+			rdev->em_efptr + RIO_EM_LTL_ERR_DETECT, 0);
+	}
+
+	/* Clear remaining error bits and Port-Write Pending bit */
+	rio_write_config_32(rdev,
+			rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(portnum),
+			err_status);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rio_inb_pwrite_handler);
+
+/**
+ * rio_mport_get_efb - get pointer to next extended features block
+ * @port: Master port to issue transaction
+ * @local: Indicate a local master port or remote device access
+ * @destid: Destination ID of the device
+ * @hopcount: Number of switch hops to the device
+ * @from: Offset of  current Extended Feature block header (if 0 starts
+ * from	ExtFeaturePtr)
+ */
+u32
+rio_mport_get_efb(struct rio_mport *port, int local, u16 destid,
+		      u8 hopcount, u32 from)
+{
+	u32 reg_val;
+
+	if (from == 0) {
+		if (local)
+			rio_local_read_config_32(port, RIO_ASM_INFO_CAR,
+						 &reg_val);
+		else
+			rio_mport_read_config_32(port, destid, hopcount,
+						 RIO_ASM_INFO_CAR, &reg_val);
+		return reg_val & RIO_EXT_FTR_PTR_MASK;
+	} else {
+		if (local)
+			rio_local_read_config_32(port, from, &reg_val);
+		else
+			rio_mport_read_config_32(port, destid, hopcount,
+						 from, &reg_val);
+		return RIO_GET_BLOCK_ID(reg_val);
+	}
+}
+EXPORT_SYMBOL_GPL(rio_mport_get_efb);
+
+/**
+ * rio_mport_get_feature - query for devices' extended features
+ * @port: Master port to issue transaction
+ * @local: Indicate a local master port or remote device access
+ * @destid: Destination ID of the device
+ * @hopcount: Number of switch hops to the device
+ * @ftr: Extended feature code
+ *
+ * Tell if a device supports a given RapidIO capability.
+ * Returns the offset of the requested extended feature
+ * block within the device's RIO configuration space or
+ * 0 in case the device does not support it.  Possible
+ * values for @ftr:
+ *
+ * %RIO_EFB_PAR_EP_ID		LP/LVDS EP Devices
+ *
+ * %RIO_EFB_PAR_EP_REC_ID	LP/LVDS EP Recovery Devices
+ *
+ * %RIO_EFB_PAR_EP_FREE_ID	LP/LVDS EP Free Devices
+ *
+ * %RIO_EFB_SER_EP_ID		LP/Serial EP Devices
+ *
+ * %RIO_EFB_SER_EP_REC_ID	LP/Serial EP Recovery Devices
+ *
+ * %RIO_EFB_SER_EP_FREE_ID	LP/Serial EP Free Devices
+ */
+u32
+rio_mport_get_feature(struct rio_mport * port, int local, u16 destid,
+		      u8 hopcount, int ftr)
+{
+	u32 asm_info, ext_ftr_ptr, ftr_header;
+
+	if (local)
+		rio_local_read_config_32(port, RIO_ASM_INFO_CAR, &asm_info);
+	else
+		rio_mport_read_config_32(port, destid, hopcount,
+					 RIO_ASM_INFO_CAR, &asm_info);
+
+	ext_ftr_ptr = asm_info & RIO_EXT_FTR_PTR_MASK;
+
+	while (ext_ftr_ptr) {
+		if (local)
+			rio_local_read_config_32(port, ext_ftr_ptr,
+						 &ftr_header);
+		else
+			rio_mport_read_config_32(port, destid, hopcount,
+						 ext_ftr_ptr, &ftr_header);
+		if (RIO_GET_BLOCK_ID(ftr_header) == ftr)
+			return ext_ftr_ptr;
+		if (!(ext_ftr_ptr = RIO_GET_BLOCK_PTR(ftr_header)))
+			break;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rio_mport_get_feature);
+
+/**
+ * rio_get_asm - Begin or continue searching for a RIO device by vid/did/asm_vid/asm_did
+ * @vid: RIO vid to match or %RIO_ANY_ID to match all vids
+ * @did: RIO did to match or %RIO_ANY_ID to match all dids
+ * @asm_vid: RIO asm_vid to match or %RIO_ANY_ID to match all asm_vids
+ * @asm_did: RIO asm_did to match or %RIO_ANY_ID to match all asm_dids
+ * @from: Previous RIO device found in search, or %NULL for new search
+ *
+ * Iterates through the list of known RIO devices. If a RIO device is
+ * found with a matching @vid, @did, @asm_vid, @asm_did, the reference
+ * count to the device is incrememted and a pointer to its device
+ * structure is returned. Otherwise, %NULL is returned. A new search
+ * is initiated by passing %NULL to the @from argument. Otherwise, if
+ * @from is not %NULL, searches continue from next device on the global
+ * list. The reference count for @from is always decremented if it is
+ * not %NULL.
+ */
+struct rio_dev *rio_get_asm(u16 vid, u16 did,
+			    u16 asm_vid, u16 asm_did, struct rio_dev *from)
+{
+	struct list_head *n;
+	struct rio_dev *rdev;
+
+	WARN_ON(in_interrupt());
+	spin_lock(&rio_global_list_lock);
+	n = from ? from->global_list.next : rio_devices.next;
+
+	while (n && (n != &rio_devices)) {
+		rdev = rio_dev_g(n);
+		if ((vid == RIO_ANY_ID || rdev->vid == vid) &&
+		    (did == RIO_ANY_ID || rdev->did == did) &&
+		    (asm_vid == RIO_ANY_ID || rdev->asm_vid == asm_vid) &&
+		    (asm_did == RIO_ANY_ID || rdev->asm_did == asm_did))
+			goto exit;
+		n = n->next;
+	}
+	rdev = NULL;
+      exit:
+	rio_dev_put(from);
+	rdev = rio_dev_get(rdev);
+	spin_unlock(&rio_global_list_lock);
+	return rdev;
+}
+
+/**
+ * rio_get_device - Begin or continue searching for a RIO device by vid/did
+ * @vid: RIO vid to match or %RIO_ANY_ID to match all vids
+ * @did: RIO did to match or %RIO_ANY_ID to match all dids
+ * @from: Previous RIO device found in search, or %NULL for new search
+ *
+ * Iterates through the list of known RIO devices. If a RIO device is
+ * found with a matching @vid and @did, the reference count to the
+ * device is incrememted and a pointer to its device structure is returned.
+ * Otherwise, %NULL is returned. A new search is initiated by passing %NULL
+ * to the @from argument. Otherwise, if @from is not %NULL, searches
+ * continue from next device on the global list. The reference count for
+ * @from is always decremented if it is not %NULL.
+ */
+struct rio_dev *rio_get_device(u16 vid, u16 did, struct rio_dev *from)
+{
+	return rio_get_asm(vid, did, RIO_ANY_ID, RIO_ANY_ID, from);
+}
+
+/**
+ * rio_std_route_add_entry - Add switch route table entry using standard
+ *   registers defined in RIO specification rev.1.3
+ * @mport: Master port to issue transaction
+ * @destid: Destination ID of the device
+ * @hopcount: Number of switch hops to the device
+ * @table: routing table ID (global or port-specific)
+ * @route_destid: destID entry in the RT
+ * @route_port: destination port for specified destID
+ */
+static int
+rio_std_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
+			u16 table, u16 route_destid, u8 route_port)
+{
+	if (table == RIO_GLOBAL_TABLE) {
+		rio_mport_write_config_32(mport, destid, hopcount,
+				RIO_STD_RTE_CONF_DESTID_SEL_CSR,
+				(u32)route_destid);
+		rio_mport_write_config_32(mport, destid, hopcount,
+				RIO_STD_RTE_CONF_PORT_SEL_CSR,
+				(u32)route_port);
+	}
+
+	udelay(10);
+	return 0;
+}
+
+/**
+ * rio_std_route_get_entry - Read switch route table entry (port number)
+ *   associated with specified destID using standard registers defined in RIO
+ *   specification rev.1.3
+ * @mport: Master port to issue transaction
+ * @destid: Destination ID of the device
+ * @hopcount: Number of switch hops to the device
+ * @table: routing table ID (global or port-specific)
+ * @route_destid: destID entry in the RT
+ * @route_port: returned destination port for specified destID
+ */
+static int
+rio_std_route_get_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
+			u16 table, u16 route_destid, u8 *route_port)
+{
+	u32 result;
+
+	if (table == RIO_GLOBAL_TABLE) {
+		rio_mport_write_config_32(mport, destid, hopcount,
+				RIO_STD_RTE_CONF_DESTID_SEL_CSR, route_destid);
+		rio_mport_read_config_32(mport, destid, hopcount,
+				RIO_STD_RTE_CONF_PORT_SEL_CSR, &result);
+
+		*route_port = (u8)result;
+	}
+
+	return 0;
+}
+
+/**
+ * rio_std_route_clr_table - Clear swotch route table using standard registers
+ *   defined in RIO specification rev.1.3.
+ * @mport: Master port to issue transaction
+ * @destid: Destination ID of the device
+ * @hopcount: Number of switch hops to the device
+ * @table: routing table ID (global or port-specific)
+ */
+static int
+rio_std_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount,
+			u16 table)
+{
+	u32 max_destid = 0xff;
+	u32 i, pef, id_inc = 1, ext_cfg = 0;
+	u32 port_sel = RIO_INVALID_ROUTE;
+
+	if (table == RIO_GLOBAL_TABLE) {
+		rio_mport_read_config_32(mport, destid, hopcount,
+					 RIO_PEF_CAR, &pef);
+
+		if (mport->sys_size) {
+			rio_mport_read_config_32(mport, destid, hopcount,
+						 RIO_SWITCH_RT_LIMIT,
+						 &max_destid);
+			max_destid &= RIO_RT_MAX_DESTID;
+		}
+
+		if (pef & RIO_PEF_EXT_RT) {
+			ext_cfg = 0x80000000;
+			id_inc = 4;
+			port_sel = (RIO_INVALID_ROUTE << 24) |
+				   (RIO_INVALID_ROUTE << 16) |
+				   (RIO_INVALID_ROUTE << 8) |
+				   RIO_INVALID_ROUTE;
+		}
+
+		for (i = 0; i <= max_destid;) {
+			rio_mport_write_config_32(mport, destid, hopcount,
+					RIO_STD_RTE_CONF_DESTID_SEL_CSR,
+					ext_cfg | i);
+			rio_mport_write_config_32(mport, destid, hopcount,
+					RIO_STD_RTE_CONF_PORT_SEL_CSR,
+					port_sel);
+			i += id_inc;
+		}
+	}
+
+	udelay(10);
+	return 0;
+}
+
+/**
+ * rio_lock_device - Acquires host device lock for specified device
+ * @port: Master port to send transaction
+ * @destid: Destination ID for device/switch
+ * @hopcount: Hopcount to reach switch
+ * @wait_ms: Max wait time in msec (0 = no timeout)
+ *
+ * Attepts to acquire host device lock for specified device
+ * Returns 0 if device lock acquired or EINVAL if timeout expires.
+ */
+int rio_lock_device(struct rio_mport *port, u16 destid,
+		    u8 hopcount, int wait_ms)
+{
+	u32 result;
+	int tcnt = 0;
+
+	/* Attempt to acquire device lock */
+	rio_mport_write_config_32(port, destid, hopcount,
+				  RIO_HOST_DID_LOCK_CSR, port->host_deviceid);
+	rio_mport_read_config_32(port, destid, hopcount,
+				 RIO_HOST_DID_LOCK_CSR, &result);
+
+	while (result != port->host_deviceid) {
+		if (wait_ms != 0 && tcnt == wait_ms) {
+			pr_debug("RIO: timeout when locking device %x:%x\n",
+				destid, hopcount);
+			return -EINVAL;
+		}
+
+		/* Delay a bit */
+		mdelay(1);
+		tcnt++;
+		/* Try to acquire device lock again */
+		rio_mport_write_config_32(port, destid,
+			hopcount,
+			RIO_HOST_DID_LOCK_CSR,
+			port->host_deviceid);
+		rio_mport_read_config_32(port, destid,
+			hopcount,
+			RIO_HOST_DID_LOCK_CSR, &result);
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rio_lock_device);
+
+/**
+ * rio_unlock_device - Releases host device lock for specified device
+ * @port: Master port to send transaction
+ * @destid: Destination ID for device/switch
+ * @hopcount: Hopcount to reach switch
+ *
+ * Returns 0 if device lock released or EINVAL if fails.
+ */
+int rio_unlock_device(struct rio_mport *port, u16 destid, u8 hopcount)
+{
+	u32 result;
+
+	/* Release device lock */
+	rio_mport_write_config_32(port, destid,
+				  hopcount,
+				  RIO_HOST_DID_LOCK_CSR,
+				  port->host_deviceid);
+	rio_mport_read_config_32(port, destid, hopcount,
+		RIO_HOST_DID_LOCK_CSR, &result);
+	if ((result & 0xffff) != 0xffff) {
+		pr_debug("RIO: badness when releasing device lock %x:%x\n",
+			 destid, hopcount);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rio_unlock_device);
+
+/**
+ * rio_route_add_entry- Add a route entry to a switch routing table
+ * @rdev: RIO device
+ * @table: Routing table ID
+ * @route_destid: Destination ID to be routed
+ * @route_port: Port number to be routed
+ * @lock: apply a hardware lock on switch device flag (1=lock, 0=no_lock)
+ *
+ * If available calls the switch specific add_entry() method to add a route
+ * entry into a switch routing table. Otherwise uses standard RT update method
+ * as defined by RapidIO specification. A specific routing table can be selected
+ * using the @table argument if a switch has per port routing tables or
+ * the standard (or global) table may be used by passing
+ * %RIO_GLOBAL_TABLE in @table.
+ *
+ * Returns %0 on success or %-EINVAL on failure.
+ */
+int rio_route_add_entry(struct rio_dev *rdev,
+			u16 table, u16 route_destid, u8 route_port, int lock)
+{
+	int rc = -EINVAL;
+	struct rio_switch_ops *ops = rdev->rswitch->ops;
+
+	if (lock) {
+		rc = rio_lock_device(rdev->net->hport, rdev->destid,
+				     rdev->hopcount, 1000);
+		if (rc)
+			return rc;
+	}
+
+	spin_lock(&rdev->rswitch->lock);
+
+	if (ops == NULL || ops->add_entry == NULL) {
+		rc = rio_std_route_add_entry(rdev->net->hport, rdev->destid,
+					     rdev->hopcount, table,
+					     route_destid, route_port);
+	} else if (try_module_get(ops->owner)) {
+		rc = ops->add_entry(rdev->net->hport, rdev->destid,
+				    rdev->hopcount, table, route_destid,
+				    route_port);
+		module_put(ops->owner);
+	}
+
+	spin_unlock(&rdev->rswitch->lock);
+
+	if (lock)
+		rio_unlock_device(rdev->net->hport, rdev->destid,
+				  rdev->hopcount);
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(rio_route_add_entry);
+
+/**
+ * rio_route_get_entry- Read an entry from a switch routing table
+ * @rdev: RIO device
+ * @table: Routing table ID
+ * @route_destid: Destination ID to be routed
+ * @route_port: Pointer to read port number into
+ * @lock: apply a hardware lock on switch device flag (1=lock, 0=no_lock)
+ *
+ * If available calls the switch specific get_entry() method to fetch a route
+ * entry from a switch routing table. Otherwise uses standard RT read method
+ * as defined by RapidIO specification. A specific routing table can be selected
+ * using the @table argument if a switch has per port routing tables or
+ * the standard (or global) table may be used by passing
+ * %RIO_GLOBAL_TABLE in @table.
+ *
+ * Returns %0 on success or %-EINVAL on failure.
+ */
+int rio_route_get_entry(struct rio_dev *rdev, u16 table,
+			u16 route_destid, u8 *route_port, int lock)
+{
+	int rc = -EINVAL;
+	struct rio_switch_ops *ops = rdev->rswitch->ops;
+
+	if (lock) {
+		rc = rio_lock_device(rdev->net->hport, rdev->destid,
+				     rdev->hopcount, 1000);
+		if (rc)
+			return rc;
+	}
+
+	spin_lock(&rdev->rswitch->lock);
+
+	if (ops == NULL || ops->get_entry == NULL) {
+		rc = rio_std_route_get_entry(rdev->net->hport, rdev->destid,
+					     rdev->hopcount, table,
+					     route_destid, route_port);
+	} else if (try_module_get(ops->owner)) {
+		rc = ops->get_entry(rdev->net->hport, rdev->destid,
+				    rdev->hopcount, table, route_destid,
+				    route_port);
+		module_put(ops->owner);
+	}
+
+	spin_unlock(&rdev->rswitch->lock);
+
+	if (lock)
+		rio_unlock_device(rdev->net->hport, rdev->destid,
+				  rdev->hopcount);
+	return rc;
+}
+EXPORT_SYMBOL_GPL(rio_route_get_entry);
+
+/**
+ * rio_route_clr_table - Clear a switch routing table
+ * @rdev: RIO device
+ * @table: Routing table ID
+ * @lock: apply a hardware lock on switch device flag (1=lock, 0=no_lock)
+ *
+ * If available calls the switch specific clr_table() method to clear a switch
+ * routing table. Otherwise uses standard RT write method as defined by RapidIO
+ * specification. A specific routing table can be selected using the @table
+ * argument if a switch has per port routing tables or the standard (or global)
+ * table may be used by passing %RIO_GLOBAL_TABLE in @table.
+ *
+ * Returns %0 on success or %-EINVAL on failure.
+ */
+int rio_route_clr_table(struct rio_dev *rdev, u16 table, int lock)
+{
+	int rc = -EINVAL;
+	struct rio_switch_ops *ops = rdev->rswitch->ops;
+
+	if (lock) {
+		rc = rio_lock_device(rdev->net->hport, rdev->destid,
+				     rdev->hopcount, 1000);
+		if (rc)
+			return rc;
+	}
+
+	spin_lock(&rdev->rswitch->lock);
+
+	if (ops == NULL || ops->clr_table == NULL) {
+		rc = rio_std_route_clr_table(rdev->net->hport, rdev->destid,
+					     rdev->hopcount, table);
+	} else if (try_module_get(ops->owner)) {
+		rc = ops->clr_table(rdev->net->hport, rdev->destid,
+				    rdev->hopcount, table);
+
+		module_put(ops->owner);
+	}
+
+	spin_unlock(&rdev->rswitch->lock);
+
+	if (lock)
+		rio_unlock_device(rdev->net->hport, rdev->destid,
+				  rdev->hopcount);
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(rio_route_clr_table);
+
+#ifdef CONFIG_RAPIDIO_DMA_ENGINE
+
+static bool rio_chan_filter(struct dma_chan *chan, void *arg)
+{
+	struct rio_mport *mport = arg;
+
+	/* Check that DMA device belongs to the right MPORT */
+	return mport == container_of(chan->device, struct rio_mport, dma);
+}
+
+/**
+ * rio_request_mport_dma - request RapidIO capable DMA channel associated
+ *   with specified local RapidIO mport device.
+ * @mport: RIO mport to perform DMA data transfers
+ *
+ * Returns pointer to allocated DMA channel or NULL if failed.
+ */
+struct dma_chan *rio_request_mport_dma(struct rio_mport *mport)
+{
+	dma_cap_mask_t mask;
+
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_SLAVE, mask);
+	return dma_request_channel(mask, rio_chan_filter, mport);
+}
+EXPORT_SYMBOL_GPL(rio_request_mport_dma);
+
+/**
+ * rio_request_dma - request RapidIO capable DMA channel that supports
+ *   specified target RapidIO device.
+ * @rdev: RIO device associated with DMA transfer
+ *
+ * Returns pointer to allocated DMA channel or NULL if failed.
+ */
+struct dma_chan *rio_request_dma(struct rio_dev *rdev)
+{
+	return rio_request_mport_dma(rdev->net->hport);
+}
+EXPORT_SYMBOL_GPL(rio_request_dma);
+
+/**
+ * rio_release_dma - release specified DMA channel
+ * @dchan: DMA channel to release
+ */
+void rio_release_dma(struct dma_chan *dchan)
+{
+	dma_release_channel(dchan);
+}
+EXPORT_SYMBOL_GPL(rio_release_dma);
+
+/**
+ * rio_dma_prep_xfer - RapidIO specific wrapper
+ *   for device_prep_slave_sg callback defined by DMAENGINE.
+ * @dchan: DMA channel to configure
+ * @destid: target RapidIO device destination ID
+ * @data: RIO specific data descriptor
+ * @direction: DMA data transfer direction (TO or FROM the device)
+ * @flags: dmaengine defined flags
+ *
+ * Initializes RapidIO capable DMA channel for the specified data transfer.
+ * Uses DMA channel private extension to pass information related to remote
+ * target RIO device.
+ * Returns pointer to DMA transaction descriptor or NULL if failed.
+ */
+struct dma_async_tx_descriptor *rio_dma_prep_xfer(struct dma_chan *dchan,
+	u16 destid, struct rio_dma_data *data,
+	enum dma_transfer_direction direction, unsigned long flags)
+{
+	struct rio_dma_ext rio_ext;
+
+	if (dchan->device->device_prep_slave_sg == NULL) {
+		pr_err("%s: prep_rio_sg == NULL\n", __func__);
+		return NULL;
+	}
+
+	rio_ext.destid = destid;
+	rio_ext.rio_addr_u = data->rio_addr_u;
+	rio_ext.rio_addr = data->rio_addr;
+	rio_ext.wr_type = data->wr_type;
+
+	return dmaengine_prep_rio_sg(dchan, data->sg, data->sg_len,
+				     direction, flags, &rio_ext);
+}
+EXPORT_SYMBOL_GPL(rio_dma_prep_xfer);
+
+/**
+ * rio_dma_prep_slave_sg - RapidIO specific wrapper
+ *   for device_prep_slave_sg callback defined by DMAENGINE.
+ * @rdev: RIO device control structure
+ * @dchan: DMA channel to configure
+ * @data: RIO specific data descriptor
+ * @direction: DMA data transfer direction (TO or FROM the device)
+ * @flags: dmaengine defined flags
+ *
+ * Initializes RapidIO capable DMA channel for the specified data transfer.
+ * Uses DMA channel private extension to pass information related to remote
+ * target RIO device.
+ * Returns pointer to DMA transaction descriptor or NULL if failed.
+ */
+struct dma_async_tx_descriptor *rio_dma_prep_slave_sg(struct rio_dev *rdev,
+	struct dma_chan *dchan, struct rio_dma_data *data,
+	enum dma_transfer_direction direction, unsigned long flags)
+{
+	return rio_dma_prep_xfer(dchan,	rdev->destid, data, direction, flags);
+}
+EXPORT_SYMBOL_GPL(rio_dma_prep_slave_sg);
+
+#endif /* CONFIG_RAPIDIO_DMA_ENGINE */
+
+/**
+ * rio_find_mport - find RIO mport by its ID
+ * @mport_id: number (ID) of mport device
+ *
+ * Given a RIO mport number, the desired mport is located
+ * in the global list of mports. If the mport is found, a pointer to its
+ * data structure is returned.  If no mport is found, %NULL is returned.
+ */
+struct rio_mport *rio_find_mport(int mport_id)
+{
+	struct rio_mport *port;
+
+	mutex_lock(&rio_mport_list_lock);
+	list_for_each_entry(port, &rio_mports, node) {
+		if (port->id == mport_id)
+			goto found;
+	}
+	port = NULL;
+found:
+	mutex_unlock(&rio_mport_list_lock);
+
+	return port;
+}
+
+/**
+ * rio_register_scan - enumeration/discovery method registration interface
+ * @mport_id: mport device ID for which fabric scan routine has to be set
+ *            (RIO_MPORT_ANY = set for all available mports)
+ * @scan_ops: enumeration/discovery operations structure
+ *
+ * Registers enumeration/discovery operations with RapidIO subsystem and
+ * attaches it to the specified mport device (or all available mports
+ * if RIO_MPORT_ANY is specified).
+ *
+ * Returns error if the mport already has an enumerator attached to it.
+ * In case of RIO_MPORT_ANY skips mports with valid scan routines (no error).
+ */
+int rio_register_scan(int mport_id, struct rio_scan *scan_ops)
+{
+	struct rio_mport *port;
+	struct rio_scan_node *scan;
+	int rc = 0;
+
+	pr_debug("RIO: %s for mport_id=%d\n", __func__, mport_id);
+
+	if ((mport_id != RIO_MPORT_ANY && mport_id >= RIO_MAX_MPORTS) ||
+	    !scan_ops)
+		return -EINVAL;
+
+	mutex_lock(&rio_mport_list_lock);
+
+	/*
+	 * Check if there is another enumerator already registered for
+	 * the same mport ID (including RIO_MPORT_ANY). Multiple enumerators
+	 * for the same mport ID are not supported.
+	 */
+	list_for_each_entry(scan, &rio_scans, node) {
+		if (scan->mport_id == mport_id) {
+			rc = -EBUSY;
+			goto err_out;
+		}
+	}
+
+	/*
+	 * Allocate and initialize new scan registration node.
+	 */
+	scan = kzalloc(sizeof(*scan), GFP_KERNEL);
+	if (!scan) {
+		rc = -ENOMEM;
+		goto err_out;
+	}
+
+	scan->mport_id = mport_id;
+	scan->ops = scan_ops;
+
+	/*
+	 * Traverse the list of registered mports to attach this new scan.
+	 *
+	 * The new scan with matching mport ID overrides any previously attached
+	 * scan assuming that old scan (if any) is the default one (based on the
+	 * enumerator registration check above).
+	 * If the new scan is the global one, it will be attached only to mports
+	 * that do not have their own individual operations already attached.
+	 */
+	list_for_each_entry(port, &rio_mports, node) {
+		if (port->id == mport_id) {
+			port->nscan = scan_ops;
+			break;
+		} else if (mport_id == RIO_MPORT_ANY && !port->nscan)
+			port->nscan = scan_ops;
+	}
+
+	list_add_tail(&scan->node, &rio_scans);
+
+err_out:
+	mutex_unlock(&rio_mport_list_lock);
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(rio_register_scan);
+
+/**
+ * rio_unregister_scan - removes enumeration/discovery method from mport
+ * @mport_id: mport device ID for which fabric scan routine has to be
+ *            unregistered (RIO_MPORT_ANY = apply to all mports that use
+ *            the specified scan_ops)
+ * @scan_ops: enumeration/discovery operations structure
+ *
+ * Removes enumeration or discovery method assigned to the specified mport
+ * device. If RIO_MPORT_ANY is specified, removes the specified operations from
+ * all mports that have them attached.
+ */
+int rio_unregister_scan(int mport_id, struct rio_scan *scan_ops)
+{
+	struct rio_mport *port;
+	struct rio_scan_node *scan;
+
+	pr_debug("RIO: %s for mport_id=%d\n", __func__, mport_id);
+
+	if (mport_id != RIO_MPORT_ANY && mport_id >= RIO_MAX_MPORTS)
+		return -EINVAL;
+
+	mutex_lock(&rio_mport_list_lock);
+
+	list_for_each_entry(port, &rio_mports, node)
+		if (port->id == mport_id ||
+		    (mport_id == RIO_MPORT_ANY && port->nscan == scan_ops))
+			port->nscan = NULL;
+
+	list_for_each_entry(scan, &rio_scans, node) {
+		if (scan->mport_id == mport_id) {
+			list_del(&scan->node);
+			kfree(scan);
+			break;
+		}
+	}
+
+	mutex_unlock(&rio_mport_list_lock);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rio_unregister_scan);
+
+/**
+ * rio_mport_scan - execute enumeration/discovery on the specified mport
+ * @mport_id: number (ID) of mport device
+ */
+int rio_mport_scan(int mport_id)
+{
+	struct rio_mport *port = NULL;
+	int rc;
+
+	mutex_lock(&rio_mport_list_lock);
+	list_for_each_entry(port, &rio_mports, node) {
+		if (port->id == mport_id)
+			goto found;
+	}
+	mutex_unlock(&rio_mport_list_lock);
+	return -ENODEV;
+found:
+	if (!port->nscan) {
+		mutex_unlock(&rio_mport_list_lock);
+		return -EINVAL;
+	}
+
+	if (!try_module_get(port->nscan->owner)) {
+		mutex_unlock(&rio_mport_list_lock);
+		return -ENODEV;
+	}
+
+	mutex_unlock(&rio_mport_list_lock);
+
+	if (port->host_deviceid >= 0)
+		rc = port->nscan->enumerate(port, 0);
+	else
+		rc = port->nscan->discover(port, RIO_SCAN_ENUM_NO_WAIT);
+
+	module_put(port->nscan->owner);
+	return rc;
+}
+
+static void rio_fixup_device(struct rio_dev *dev)
+{
+}
+
+static int rio_init(void)
+{
+	struct rio_dev *dev = NULL;
+
+	while ((dev = rio_get_device(RIO_ANY_ID, RIO_ANY_ID, dev)) != NULL) {
+		rio_fixup_device(dev);
+	}
+	return 0;
+}
+
+static struct workqueue_struct *rio_wq;
+
+struct rio_disc_work {
+	struct work_struct	work;
+	struct rio_mport	*mport;
+};
+
+static void disc_work_handler(struct work_struct *_work)
+{
+	struct rio_disc_work *work;
+
+	work = container_of(_work, struct rio_disc_work, work);
+	pr_debug("RIO: discovery work for mport %d %s\n",
+		 work->mport->id, work->mport->name);
+	if (try_module_get(work->mport->nscan->owner)) {
+		work->mport->nscan->discover(work->mport, 0);
+		module_put(work->mport->nscan->owner);
+	}
+}
+
+int rio_init_mports(void)
+{
+	struct rio_mport *port;
+	struct rio_disc_work *work;
+	int n = 0;
+
+	if (!next_portid)
+		return -ENODEV;
+
+	/*
+	 * First, run enumerations and check if we need to perform discovery
+	 * on any of the registered mports.
+	 */
+	mutex_lock(&rio_mport_list_lock);
+	list_for_each_entry(port, &rio_mports, node) {
+		if (port->host_deviceid >= 0) {
+			if (port->nscan && try_module_get(port->nscan->owner)) {
+				port->nscan->enumerate(port, 0);
+				module_put(port->nscan->owner);
+			}
+		} else
+			n++;
+	}
+	mutex_unlock(&rio_mport_list_lock);
+
+	if (!n)
+		goto no_disc;
+
+	/*
+	 * If we have mports that require discovery schedule a discovery work
+	 * for each of them. If the code below fails to allocate needed
+	 * resources, exit without error to keep results of enumeration
+	 * process (if any).
+	 * TODO: Implement restart of discovery process for all or
+	 * individual discovering mports.
+	 */
+	rio_wq = alloc_workqueue("riodisc", 0, 0);
+	if (!rio_wq) {
+		pr_err("RIO: unable allocate rio_wq\n");
+		goto no_disc;
+	}
+
+	work = kcalloc(n, sizeof *work, GFP_KERNEL);
+	if (!work) {
+		pr_err("RIO: no memory for work struct\n");
+		destroy_workqueue(rio_wq);
+		goto no_disc;
+	}
+
+	n = 0;
+	mutex_lock(&rio_mport_list_lock);
+	list_for_each_entry(port, &rio_mports, node) {
+		if (port->host_deviceid < 0 && port->nscan) {
+			work[n].mport = port;
+			INIT_WORK(&work[n].work, disc_work_handler);
+			queue_work(rio_wq, &work[n].work);
+			n++;
+		}
+	}
+
+	flush_workqueue(rio_wq);
+	mutex_unlock(&rio_mport_list_lock);
+	pr_debug("RIO: destroy discovery workqueue\n");
+	destroy_workqueue(rio_wq);
+	kfree(work);
+
+no_disc:
+	rio_init();
+
+	return 0;
+}
+
+static int rio_get_hdid(int index)
+{
+	if (ids_num == 0 || ids_num <= index || index >= RIO_MAX_MPORTS)
+		return -1;
+
+	return hdid[index];
+}
+
+int rio_register_mport(struct rio_mport *port)
+{
+	struct rio_scan_node *scan = NULL;
+	int res = 0;
+
+	if (next_portid >= RIO_MAX_MPORTS) {
+		pr_err("RIO: reached specified max number of mports\n");
+		return 1;
+	}
+
+	port->id = next_portid++;
+	port->host_deviceid = rio_get_hdid(port->id);
+	port->nscan = NULL;
+
+	dev_set_name(&port->dev, "rapidio%d", port->id);
+	port->dev.class = &rio_mport_class;
+
+	res = device_register(&port->dev);
+	if (res)
+		dev_err(&port->dev, "RIO: mport%d registration failed ERR=%d\n",
+			port->id, res);
+	else
+		dev_dbg(&port->dev, "RIO: mport%d registered\n", port->id);
+
+	mutex_lock(&rio_mport_list_lock);
+	list_add_tail(&port->node, &rio_mports);
+
+	/*
+	 * Check if there are any registered enumeration/discovery operations
+	 * that have to be attached to the added mport.
+	 */
+	list_for_each_entry(scan, &rio_scans, node) {
+		if (port->id == scan->mport_id ||
+		    scan->mport_id == RIO_MPORT_ANY) {
+			port->nscan = scan->ops;
+			if (port->id == scan->mport_id)
+				break;
+		}
+	}
+	mutex_unlock(&rio_mport_list_lock);
+
+	pr_debug("RIO: %s %s id=%d\n", __func__, port->name, port->id);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rio_register_mport);
+
+EXPORT_SYMBOL_GPL(rio_local_get_device_id);
+EXPORT_SYMBOL_GPL(rio_get_device);
+EXPORT_SYMBOL_GPL(rio_get_asm);
+EXPORT_SYMBOL_GPL(rio_request_inb_dbell);
+EXPORT_SYMBOL_GPL(rio_release_inb_dbell);
+EXPORT_SYMBOL_GPL(rio_request_outb_dbell);
+EXPORT_SYMBOL_GPL(rio_release_outb_dbell);
+EXPORT_SYMBOL_GPL(rio_request_inb_mbox);
+EXPORT_SYMBOL_GPL(rio_release_inb_mbox);
+EXPORT_SYMBOL_GPL(rio_request_outb_mbox);
+EXPORT_SYMBOL_GPL(rio_release_outb_mbox);
+EXPORT_SYMBOL_GPL(rio_init_mports);
diff --git a/kernel/drivers/rapidio/rio.h b/kernel/drivers/rapidio/rio.h
new file mode 100644
index 000000000..2d0550e08
--- /dev/null
+++ b/kernel/drivers/rapidio/rio.h
@@ -0,0 +1,56 @@
+/*
+ * RapidIO interconnect services
+ *
+ * Copyright 2005 MontaVista Software, Inc.
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/rio.h>
+
+#define RIO_MAX_CHK_RETRY	3
+#define RIO_MPORT_ANY		(-1)
+
+/* Functions internal to the RIO core code */
+
+extern u32 rio_mport_get_feature(struct rio_mport *mport, int local, u16 destid,
+				 u8 hopcount, int ftr);
+extern u32 rio_mport_get_physefb(struct rio_mport *port, int local,
+				 u16 destid, u8 hopcount);
+extern u32 rio_mport_get_efb(struct rio_mport *port, int local, u16 destid,
+			     u8 hopcount, u32 from);
+extern int rio_mport_chk_dev_access(struct rio_mport *mport, u16 destid,
+				    u8 hopcount);
+extern int rio_create_sysfs_dev_files(struct rio_dev *rdev);
+extern int rio_lock_device(struct rio_mport *port, u16 destid,
+			u8 hopcount, int wait_ms);
+extern int rio_unlock_device(struct rio_mport *port, u16 destid, u8 hopcount);
+extern int rio_route_add_entry(struct rio_dev *rdev,
+			u16 table, u16 route_destid, u8 route_port, int lock);
+extern int rio_route_get_entry(struct rio_dev *rdev, u16 table,
+			u16 route_destid, u8 *route_port, int lock);
+extern int rio_route_clr_table(struct rio_dev *rdev, u16 table, int lock);
+extern int rio_set_port_lockout(struct rio_dev *rdev, u32 pnum, int lock);
+extern struct rio_dev *rio_get_comptag(u32 comp_tag, struct rio_dev *from);
+extern int rio_add_device(struct rio_dev *rdev);
+extern int rio_enable_rx_tx_port(struct rio_mport *port, int local, u16 destid,
+				 u8 hopcount, u8 port_num);
+extern int rio_register_scan(int mport_id, struct rio_scan *scan_ops);
+extern int rio_unregister_scan(int mport_id, struct rio_scan *scan_ops);
+extern void rio_attach_device(struct rio_dev *rdev);
+extern struct rio_mport *rio_find_mport(int mport_id);
+extern int rio_mport_scan(int mport_id);
+
+/* Structures internal to the RIO core code */
+extern const struct attribute_group *rio_dev_groups[];
+extern const struct attribute_group *rio_bus_groups[];
+extern const struct attribute_group *rio_mport_groups[];
+
+#define RIO_GET_DID(size, x)	(size ? (x & 0xffff) : ((x & 0x00ff0000) >> 16))
+#define RIO_SET_DID(size, x)	(size ? (x & 0xffff) : ((x & 0x000000ff) << 16))
diff --git a/kernel/drivers/rapidio/switches/Kconfig b/kernel/drivers/rapidio/switches/Kconfig
new file mode 100644
index 000000000..345841562
--- /dev/null
+++ b/kernel/drivers/rapidio/switches/Kconfig
@@ -0,0 +1,24 @@
+#
+# RapidIO switches configuration
+#
+config RAPIDIO_TSI57X
+	tristate "IDT Tsi57x SRIO switches support"
+	---help---
+	  Includes support for IDT Tsi57x family of serial RapidIO switches.
+
+config RAPIDIO_CPS_XX
+	tristate "IDT CPS-xx SRIO switches support"
+	---help---
+	  Includes support for IDT CPS-16/12/10/8 serial RapidIO switches.
+
+config RAPIDIO_TSI568
+	tristate "Tsi568 SRIO switch support"
+	default n
+	---help---
+	  Includes support for IDT Tsi568 serial RapidIO switch.
+
+config RAPIDIO_CPS_GEN2
+	tristate "IDT CPS Gen.2 SRIO switch support"
+	default n
+	---help---
+	  Includes support for ITD CPS Gen.2 serial RapidIO switches.
diff --git a/kernel/drivers/rapidio/switches/Makefile b/kernel/drivers/rapidio/switches/Makefile
new file mode 100644
index 000000000..051cc6b38
--- /dev/null
+++ b/kernel/drivers/rapidio/switches/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for RIO switches
+#
+
+obj-$(CONFIG_RAPIDIO_TSI57X)	+= tsi57x.o
+obj-$(CONFIG_RAPIDIO_CPS_XX)	+= idtcps.o
+obj-$(CONFIG_RAPIDIO_TSI568)	+= tsi568.o
+obj-$(CONFIG_RAPIDIO_CPS_GEN2)	+= idt_gen2.o
diff --git a/kernel/drivers/rapidio/switches/idt_gen2.c b/kernel/drivers/rapidio/switches/idt_gen2.c
new file mode 100644
index 000000000..9f7fe2158
--- /dev/null
+++ b/kernel/drivers/rapidio/switches/idt_gen2.c
@@ -0,0 +1,495 @@
+/*
+ * IDT CPS Gen.2 Serial RapidIO switch family support
+ *
+ * Copyright 2010 Integrated Device Technology, Inc.
+ * Alexandre Bounine <alexandre.bounine@idt.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stat.h>
+#include <linux/module.h>
+#include <linux/rio.h>
+#include <linux/rio_drv.h>
+#include <linux/rio_ids.h>
+#include <linux/delay.h>
+
+#include <asm/page.h>
+#include "../rio.h"
+
+#define LOCAL_RTE_CONF_DESTID_SEL	0x010070
+#define LOCAL_RTE_CONF_DESTID_SEL_PSEL	0x0000001f
+
+#define IDT_LT_ERR_REPORT_EN	0x03100c
+
+#define IDT_PORT_ERR_REPORT_EN(n)	(0x031044 + (n)*0x40)
+#define IDT_PORT_ERR_REPORT_EN_BC	0x03ff04
+
+#define IDT_PORT_ISERR_REPORT_EN(n)	(0x03104C + (n)*0x40)
+#define IDT_PORT_ISERR_REPORT_EN_BC	0x03ff0c
+#define IDT_PORT_INIT_TX_ACQUIRED	0x00000020
+
+#define IDT_LANE_ERR_REPORT_EN(n)	(0x038010 + (n)*0x100)
+#define IDT_LANE_ERR_REPORT_EN_BC	0x03ff10
+
+#define IDT_DEV_CTRL_1		0xf2000c
+#define IDT_DEV_CTRL_1_GENPW		0x02000000
+#define IDT_DEV_CTRL_1_PRSTBEH		0x00000001
+
+#define IDT_CFGBLK_ERR_CAPTURE_EN	0x020008
+#define IDT_CFGBLK_ERR_REPORT		0xf20014
+#define IDT_CFGBLK_ERR_REPORT_GENPW		0x00000002
+
+#define IDT_AUX_PORT_ERR_CAP_EN	0x020000
+#define IDT_AUX_ERR_REPORT_EN	0xf20018
+#define IDT_AUX_PORT_ERR_LOG_I2C	0x00000002
+#define IDT_AUX_PORT_ERR_LOG_JTAG	0x00000001
+
+#define	IDT_ISLTL_ADDRESS_CAP	0x021014
+
+#define IDT_RIO_DOMAIN		0xf20020
+#define IDT_RIO_DOMAIN_MASK		0x000000ff
+
+#define IDT_PW_INFO_CSR		0xf20024
+
+#define IDT_SOFT_RESET		0xf20040
+#define IDT_SOFT_RESET_REQ		0x00030097
+
+#define IDT_I2C_MCTRL		0xf20050
+#define IDT_I2C_MCTRL_GENPW		0x04000000
+
+#define IDT_JTAG_CTRL		0xf2005c
+#define IDT_JTAG_CTRL_GENPW		0x00000002
+
+#define IDT_LANE_CTRL(n)	(0xff8000 + (n)*0x100)
+#define IDT_LANE_CTRL_BC	0xffff00
+#define IDT_LANE_CTRL_GENPW		0x00200000
+#define IDT_LANE_DFE_1_BC	0xffff18
+#define IDT_LANE_DFE_2_BC	0xffff1c
+
+#define IDT_PORT_OPS(n)		(0xf40004 + (n)*0x100)
+#define IDT_PORT_OPS_GENPW		0x08000000
+#define IDT_PORT_OPS_PL_ELOG		0x00000040
+#define IDT_PORT_OPS_LL_ELOG		0x00000020
+#define IDT_PORT_OPS_LT_ELOG		0x00000010
+#define IDT_PORT_OPS_BC		0xf4ff04
+
+#define IDT_PORT_ISERR_DET(n)	(0xf40008 + (n)*0x100)
+
+#define IDT_ERR_CAP		0xfd0000
+#define IDT_ERR_CAP_LOG_OVERWR		0x00000004
+
+#define IDT_ERR_RD		0xfd0004
+
+#define IDT_DEFAULT_ROUTE	0xde
+#define IDT_NO_ROUTE		0xdf
+
+static int
+idtg2_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
+		       u16 table, u16 route_destid, u8 route_port)
+{
+	/*
+	 * Select routing table to update
+	 */
+	if (table == RIO_GLOBAL_TABLE)
+		table = 0;
+	else
+		table++;
+
+	if (route_port == RIO_INVALID_ROUTE)
+		route_port = IDT_DEFAULT_ROUTE;
+
+	rio_mport_write_config_32(mport, destid, hopcount,
+				  LOCAL_RTE_CONF_DESTID_SEL, table);
+
+	/*
+	 * Program destination port for the specified destID
+	 */
+	rio_mport_write_config_32(mport, destid, hopcount,
+				  RIO_STD_RTE_CONF_DESTID_SEL_CSR,
+				  (u32)route_destid);
+
+	rio_mport_write_config_32(mport, destid, hopcount,
+				  RIO_STD_RTE_CONF_PORT_SEL_CSR,
+				  (u32)route_port);
+	udelay(10);
+
+	return 0;
+}
+
+static int
+idtg2_route_get_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
+		       u16 table, u16 route_destid, u8 *route_port)
+{
+	u32 result;
+
+	/*
+	 * Select routing table to read
+	 */
+	if (table == RIO_GLOBAL_TABLE)
+		table = 0;
+	else
+		table++;
+
+	rio_mport_write_config_32(mport, destid, hopcount,
+				  LOCAL_RTE_CONF_DESTID_SEL, table);
+
+	rio_mport_write_config_32(mport, destid, hopcount,
+				  RIO_STD_RTE_CONF_DESTID_SEL_CSR,
+				  route_destid);
+
+	rio_mport_read_config_32(mport, destid, hopcount,
+				 RIO_STD_RTE_CONF_PORT_SEL_CSR, &result);
+
+	if (IDT_DEFAULT_ROUTE == (u8)result || IDT_NO_ROUTE == (u8)result)
+		*route_port = RIO_INVALID_ROUTE;
+	else
+		*route_port = (u8)result;
+
+	return 0;
+}
+
+static int
+idtg2_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount,
+		       u16 table)
+{
+	u32 i;
+
+	/*
+	 * Select routing table to read
+	 */
+	if (table == RIO_GLOBAL_TABLE)
+		table = 0;
+	else
+		table++;
+
+	rio_mport_write_config_32(mport, destid, hopcount,
+				  LOCAL_RTE_CONF_DESTID_SEL, table);
+
+	for (i = RIO_STD_RTE_CONF_EXTCFGEN;
+	     i <= (RIO_STD_RTE_CONF_EXTCFGEN | 0xff);) {
+		rio_mport_write_config_32(mport, destid, hopcount,
+			RIO_STD_RTE_CONF_DESTID_SEL_CSR, i);
+		rio_mport_write_config_32(mport, destid, hopcount,
+			RIO_STD_RTE_CONF_PORT_SEL_CSR,
+			(IDT_DEFAULT_ROUTE << 24) | (IDT_DEFAULT_ROUTE << 16) |
+			(IDT_DEFAULT_ROUTE << 8) | IDT_DEFAULT_ROUTE);
+		i += 4;
+	}
+
+	return 0;
+}
+
+
+static int
+idtg2_set_domain(struct rio_mport *mport, u16 destid, u8 hopcount,
+		       u8 sw_domain)
+{
+	/*
+	 * Switch domain configuration operates only at global level
+	 */
+	rio_mport_write_config_32(mport, destid, hopcount,
+				  IDT_RIO_DOMAIN, (u32)sw_domain);
+	return 0;
+}
+
+static int
+idtg2_get_domain(struct rio_mport *mport, u16 destid, u8 hopcount,
+		       u8 *sw_domain)
+{
+	u32 regval;
+
+	/*
+	 * Switch domain configuration operates only at global level
+	 */
+	rio_mport_read_config_32(mport, destid, hopcount,
+				IDT_RIO_DOMAIN, &regval);
+
+	*sw_domain = (u8)(regval & 0xff);
+
+	return 0;
+}
+
+static int
+idtg2_em_init(struct rio_dev *rdev)
+{
+	u32 regval;
+	int i, tmp;
+
+	/*
+	 * This routine performs device-specific initialization only.
+	 * All standard EM configuration should be performed at upper level.
+	 */
+
+	pr_debug("RIO: %s [%d:%d]\n", __func__, rdev->destid, rdev->hopcount);
+
+	/* Set Port-Write info CSR: PRIO=3 and CRF=1 */
+	rio_write_config_32(rdev, IDT_PW_INFO_CSR, 0x0000e000);
+
+	/*
+	 * Configure LT LAYER error reporting.
+	 */
+
+	/* Enable standard (RIO.p8) error reporting */
+	rio_write_config_32(rdev, IDT_LT_ERR_REPORT_EN,
+			REM_LTL_ERR_ILLTRAN | REM_LTL_ERR_UNSOLR |
+			REM_LTL_ERR_UNSUPTR);
+
+	/* Use Port-Writes for LT layer error reporting.
+	 * Enable per-port reset
+	 */
+	rio_read_config_32(rdev, IDT_DEV_CTRL_1, &regval);
+	rio_write_config_32(rdev, IDT_DEV_CTRL_1,
+			regval | IDT_DEV_CTRL_1_GENPW | IDT_DEV_CTRL_1_PRSTBEH);
+
+	/*
+	 * Configure PORT error reporting.
+	 */
+
+	/* Report all RIO.p8 errors supported by device */
+	rio_write_config_32(rdev, IDT_PORT_ERR_REPORT_EN_BC, 0x807e8037);
+
+	/* Configure reporting of implementation specific errors/events */
+	rio_write_config_32(rdev, IDT_PORT_ISERR_REPORT_EN_BC,
+			    IDT_PORT_INIT_TX_ACQUIRED);
+
+	/* Use Port-Writes for port error reporting and enable error logging */
+	tmp = RIO_GET_TOTAL_PORTS(rdev->swpinfo);
+	for (i = 0; i < tmp; i++) {
+		rio_read_config_32(rdev, IDT_PORT_OPS(i), &regval);
+		rio_write_config_32(rdev,
+				IDT_PORT_OPS(i), regval | IDT_PORT_OPS_GENPW |
+				IDT_PORT_OPS_PL_ELOG |
+				IDT_PORT_OPS_LL_ELOG |
+				IDT_PORT_OPS_LT_ELOG);
+	}
+	/* Overwrite error log if full */
+	rio_write_config_32(rdev, IDT_ERR_CAP, IDT_ERR_CAP_LOG_OVERWR);
+
+	/*
+	 * Configure LANE error reporting.
+	 */
+
+	/* Disable line error reporting */
+	rio_write_config_32(rdev, IDT_LANE_ERR_REPORT_EN_BC, 0);
+
+	/* Use Port-Writes for lane error reporting (when enabled)
+	 * (do per-lane update because lanes may have different configuration)
+	 */
+	tmp = (rdev->did == RIO_DID_IDTCPS1848) ? 48 : 16;
+	for (i = 0; i < tmp; i++) {
+		rio_read_config_32(rdev, IDT_LANE_CTRL(i), &regval);
+		rio_write_config_32(rdev, IDT_LANE_CTRL(i),
+				    regval | IDT_LANE_CTRL_GENPW);
+	}
+
+	/*
+	 * Configure AUX error reporting.
+	 */
+
+	/* Disable JTAG and I2C Error capture */
+	rio_write_config_32(rdev, IDT_AUX_PORT_ERR_CAP_EN, 0);
+
+	/* Disable JTAG and I2C Error reporting/logging */
+	rio_write_config_32(rdev, IDT_AUX_ERR_REPORT_EN, 0);
+
+	/* Disable Port-Write notification from JTAG */
+	rio_write_config_32(rdev, IDT_JTAG_CTRL, 0);
+
+	/* Disable Port-Write notification from I2C */
+	rio_read_config_32(rdev, IDT_I2C_MCTRL, &regval);
+	rio_write_config_32(rdev, IDT_I2C_MCTRL, regval & ~IDT_I2C_MCTRL_GENPW);
+
+	/*
+	 * Configure CFG_BLK error reporting.
+	 */
+
+	/* Disable Configuration Block error capture */
+	rio_write_config_32(rdev, IDT_CFGBLK_ERR_CAPTURE_EN, 0);
+
+	/* Disable Port-Writes for Configuration Block error reporting */
+	rio_read_config_32(rdev, IDT_CFGBLK_ERR_REPORT, &regval);
+	rio_write_config_32(rdev, IDT_CFGBLK_ERR_REPORT,
+			    regval & ~IDT_CFGBLK_ERR_REPORT_GENPW);
+
+	/* set TVAL = ~50us */
+	rio_write_config_32(rdev,
+		rdev->phys_efptr + RIO_PORT_LINKTO_CTL_CSR, 0x8e << 8);
+
+	return 0;
+}
+
+static int
+idtg2_em_handler(struct rio_dev *rdev, u8 portnum)
+{
+	u32 regval, em_perrdet, em_ltlerrdet;
+
+	rio_read_config_32(rdev,
+		rdev->em_efptr + RIO_EM_LTL_ERR_DETECT, &em_ltlerrdet);
+	if (em_ltlerrdet) {
+		/* Service Logical/Transport Layer Error(s) */
+		if (em_ltlerrdet & REM_LTL_ERR_IMPSPEC) {
+			/* Implementation specific error reported */
+			rio_read_config_32(rdev,
+					IDT_ISLTL_ADDRESS_CAP, &regval);
+
+			pr_debug("RIO: %s Implementation Specific LTL errors" \
+				 " 0x%x @(0x%x)\n",
+				 rio_name(rdev), em_ltlerrdet, regval);
+
+			/* Clear implementation specific address capture CSR */
+			rio_write_config_32(rdev, IDT_ISLTL_ADDRESS_CAP, 0);
+
+		}
+	}
+
+	rio_read_config_32(rdev,
+		rdev->em_efptr + RIO_EM_PN_ERR_DETECT(portnum), &em_perrdet);
+	if (em_perrdet) {
+		/* Service Port-Level Error(s) */
+		if (em_perrdet & REM_PED_IMPL_SPEC) {
+			/* Implementation Specific port error reported */
+
+			/* Get IS errors reported */
+			rio_read_config_32(rdev,
+					IDT_PORT_ISERR_DET(portnum), &regval);
+
+			pr_debug("RIO: %s Implementation Specific Port" \
+				 " errors 0x%x\n", rio_name(rdev), regval);
+
+			/* Clear all implementation specific events */
+			rio_write_config_32(rdev,
+					IDT_PORT_ISERR_DET(portnum), 0);
+		}
+	}
+
+	return 0;
+}
+
+static ssize_t
+idtg2_show_errlog(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct rio_dev *rdev = to_rio_dev(dev);
+	ssize_t len = 0;
+	u32 regval;
+
+	while (!rio_read_config_32(rdev, IDT_ERR_RD, &regval)) {
+		if (!regval)    /* 0 = end of log */
+			break;
+		len += snprintf(buf + len, PAGE_SIZE - len,
+					"%08x\n", regval);
+		if (len >= (PAGE_SIZE - 10))
+			break;
+	}
+
+	return len;
+}
+
+static DEVICE_ATTR(errlog, S_IRUGO, idtg2_show_errlog, NULL);
+
+static int idtg2_sysfs(struct rio_dev *rdev, bool create)
+{
+	struct device *dev = &rdev->dev;
+	int err = 0;
+
+	if (create) {
+		/* Initialize sysfs entries */
+		err = device_create_file(dev, &dev_attr_errlog);
+		if (err)
+			dev_err(dev, "Unable create sysfs errlog file\n");
+	} else
+		device_remove_file(dev, &dev_attr_errlog);
+
+	return err;
+}
+
+static struct rio_switch_ops idtg2_switch_ops = {
+	.owner = THIS_MODULE,
+	.add_entry = idtg2_route_add_entry,
+	.get_entry = idtg2_route_get_entry,
+	.clr_table = idtg2_route_clr_table,
+	.set_domain = idtg2_set_domain,
+	.get_domain = idtg2_get_domain,
+	.em_init = idtg2_em_init,
+	.em_handle = idtg2_em_handler,
+};
+
+static int idtg2_probe(struct rio_dev *rdev, const struct rio_device_id *id)
+{
+	pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev));
+
+	spin_lock(&rdev->rswitch->lock);
+
+	if (rdev->rswitch->ops) {
+		spin_unlock(&rdev->rswitch->lock);
+		return -EINVAL;
+	}
+
+	rdev->rswitch->ops = &idtg2_switch_ops;
+
+	if (rdev->do_enum) {
+		/* Ensure that default routing is disabled on startup */
+		rio_write_config_32(rdev,
+				    RIO_STD_RTE_DEFAULT_PORT, IDT_NO_ROUTE);
+	}
+
+	/* Create device-specific sysfs attributes */
+	idtg2_sysfs(rdev, true);
+
+	spin_unlock(&rdev->rswitch->lock);
+	return 0;
+}
+
+static void idtg2_remove(struct rio_dev *rdev)
+{
+	pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev));
+	spin_lock(&rdev->rswitch->lock);
+	if (rdev->rswitch->ops != &idtg2_switch_ops) {
+		spin_unlock(&rdev->rswitch->lock);
+		return;
+	}
+	rdev->rswitch->ops = NULL;
+
+	/* Remove device-specific sysfs attributes */
+	idtg2_sysfs(rdev, false);
+
+	spin_unlock(&rdev->rswitch->lock);
+}
+
+static struct rio_device_id idtg2_id_table[] = {
+	{RIO_DEVICE(RIO_DID_IDTCPS1848, RIO_VID_IDT)},
+	{RIO_DEVICE(RIO_DID_IDTCPS1616, RIO_VID_IDT)},
+	{RIO_DEVICE(RIO_DID_IDTVPS1616, RIO_VID_IDT)},
+	{RIO_DEVICE(RIO_DID_IDTSPS1616, RIO_VID_IDT)},
+	{RIO_DEVICE(RIO_DID_IDTCPS1432, RIO_VID_IDT)},
+	{ 0, }	/* terminate list */
+};
+
+static struct rio_driver idtg2_driver = {
+	.name = "idt_gen2",
+	.id_table = idtg2_id_table,
+	.probe = idtg2_probe,
+	.remove = idtg2_remove,
+};
+
+static int __init idtg2_init(void)
+{
+	return rio_register_driver(&idtg2_driver);
+}
+
+static void __exit idtg2_exit(void)
+{
+	pr_debug("RIO: %s\n", __func__);
+	rio_unregister_driver(&idtg2_driver);
+	pr_debug("RIO: %s done\n", __func__);
+}
+
+device_initcall(idtg2_init);
+module_exit(idtg2_exit);
+
+MODULE_DESCRIPTION("IDT CPS Gen.2 Serial RapidIO switch family driver");
+MODULE_AUTHOR("Integrated Device Technology, Inc.");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/rapidio/switches/idtcps.c b/kernel/drivers/rapidio/switches/idtcps.c
new file mode 100644
index 000000000..7fbb60d31
--- /dev/null
+++ b/kernel/drivers/rapidio/switches/idtcps.c
@@ -0,0 +1,203 @@
+/*
+ * IDT CPS RapidIO switches support
+ *
+ * Copyright 2009-2010 Integrated Device Technology, Inc.
+ * Alexandre Bounine <alexandre.bounine@idt.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/rio.h>
+#include <linux/rio_drv.h>
+#include <linux/rio_ids.h>
+#include <linux/module.h>
+#include "../rio.h"
+
+#define CPS_DEFAULT_ROUTE	0xde
+#define CPS_NO_ROUTE		0xdf
+
+#define IDTCPS_RIO_DOMAIN 0xf20020
+
+static int
+idtcps_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
+		       u16 table, u16 route_destid, u8 route_port)
+{
+	u32 result;
+
+	if (route_port == RIO_INVALID_ROUTE)
+		route_port = CPS_DEFAULT_ROUTE;
+
+	if (table == RIO_GLOBAL_TABLE) {
+		rio_mport_write_config_32(mport, destid, hopcount,
+				RIO_STD_RTE_CONF_DESTID_SEL_CSR, route_destid);
+
+		rio_mport_read_config_32(mport, destid, hopcount,
+				RIO_STD_RTE_CONF_PORT_SEL_CSR, &result);
+
+		result = (0xffffff00 & result) | (u32)route_port;
+		rio_mport_write_config_32(mport, destid, hopcount,
+				RIO_STD_RTE_CONF_PORT_SEL_CSR, result);
+	}
+
+	return 0;
+}
+
+static int
+idtcps_route_get_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
+		       u16 table, u16 route_destid, u8 *route_port)
+{
+	u32 result;
+
+	if (table == RIO_GLOBAL_TABLE) {
+		rio_mport_write_config_32(mport, destid, hopcount,
+				RIO_STD_RTE_CONF_DESTID_SEL_CSR, route_destid);
+
+		rio_mport_read_config_32(mport, destid, hopcount,
+				RIO_STD_RTE_CONF_PORT_SEL_CSR, &result);
+
+		if (CPS_DEFAULT_ROUTE == (u8)result ||
+		    CPS_NO_ROUTE == (u8)result)
+			*route_port = RIO_INVALID_ROUTE;
+		else
+			*route_port = (u8)result;
+	}
+
+	return 0;
+}
+
+static int
+idtcps_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount,
+		       u16 table)
+{
+	u32 i;
+
+	if (table == RIO_GLOBAL_TABLE) {
+		for (i = 0x80000000; i <= 0x800000ff;) {
+			rio_mport_write_config_32(mport, destid, hopcount,
+				RIO_STD_RTE_CONF_DESTID_SEL_CSR, i);
+			rio_mport_write_config_32(mport, destid, hopcount,
+				RIO_STD_RTE_CONF_PORT_SEL_CSR,
+				(CPS_DEFAULT_ROUTE << 24) |
+				(CPS_DEFAULT_ROUTE << 16) |
+				(CPS_DEFAULT_ROUTE << 8) | CPS_DEFAULT_ROUTE);
+			i += 4;
+		}
+	}
+
+	return 0;
+}
+
+static int
+idtcps_set_domain(struct rio_mport *mport, u16 destid, u8 hopcount,
+		       u8 sw_domain)
+{
+	/*
+	 * Switch domain configuration operates only at global level
+	 */
+	rio_mport_write_config_32(mport, destid, hopcount,
+				  IDTCPS_RIO_DOMAIN, (u32)sw_domain);
+	return 0;
+}
+
+static int
+idtcps_get_domain(struct rio_mport *mport, u16 destid, u8 hopcount,
+		       u8 *sw_domain)
+{
+	u32 regval;
+
+	/*
+	 * Switch domain configuration operates only at global level
+	 */
+	rio_mport_read_config_32(mport, destid, hopcount,
+				IDTCPS_RIO_DOMAIN, &regval);
+
+	*sw_domain = (u8)(regval & 0xff);
+
+	return 0;
+}
+
+static struct rio_switch_ops idtcps_switch_ops = {
+	.owner = THIS_MODULE,
+	.add_entry = idtcps_route_add_entry,
+	.get_entry = idtcps_route_get_entry,
+	.clr_table = idtcps_route_clr_table,
+	.set_domain = idtcps_set_domain,
+	.get_domain = idtcps_get_domain,
+	.em_init = NULL,
+	.em_handle = NULL,
+};
+
+static int idtcps_probe(struct rio_dev *rdev, const struct rio_device_id *id)
+{
+	pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev));
+
+	spin_lock(&rdev->rswitch->lock);
+
+	if (rdev->rswitch->ops) {
+		spin_unlock(&rdev->rswitch->lock);
+		return -EINVAL;
+	}
+
+	rdev->rswitch->ops = &idtcps_switch_ops;
+
+	if (rdev->do_enum) {
+		/* set TVAL = ~50us */
+		rio_write_config_32(rdev,
+			rdev->phys_efptr + RIO_PORT_LINKTO_CTL_CSR, 0x8e << 8);
+		/* Ensure that default routing is disabled on startup */
+		rio_write_config_32(rdev,
+				    RIO_STD_RTE_DEFAULT_PORT, CPS_NO_ROUTE);
+	}
+
+	spin_unlock(&rdev->rswitch->lock);
+	return 0;
+}
+
+static void idtcps_remove(struct rio_dev *rdev)
+{
+	pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev));
+	spin_lock(&rdev->rswitch->lock);
+	if (rdev->rswitch->ops != &idtcps_switch_ops) {
+		spin_unlock(&rdev->rswitch->lock);
+		return;
+	}
+	rdev->rswitch->ops = NULL;
+	spin_unlock(&rdev->rswitch->lock);
+}
+
+static struct rio_device_id idtcps_id_table[] = {
+	{RIO_DEVICE(RIO_DID_IDTCPS6Q, RIO_VID_IDT)},
+	{RIO_DEVICE(RIO_DID_IDTCPS8, RIO_VID_IDT)},
+	{RIO_DEVICE(RIO_DID_IDTCPS10Q, RIO_VID_IDT)},
+	{RIO_DEVICE(RIO_DID_IDTCPS12, RIO_VID_IDT)},
+	{RIO_DEVICE(RIO_DID_IDTCPS16, RIO_VID_IDT)},
+	{RIO_DEVICE(RIO_DID_IDT70K200, RIO_VID_IDT)},
+	{ 0, }	/* terminate list */
+};
+
+static struct rio_driver idtcps_driver = {
+	.name = "idtcps",
+	.id_table = idtcps_id_table,
+	.probe = idtcps_probe,
+	.remove = idtcps_remove,
+};
+
+static int __init idtcps_init(void)
+{
+	return rio_register_driver(&idtcps_driver);
+}
+
+static void __exit idtcps_exit(void)
+{
+	rio_unregister_driver(&idtcps_driver);
+}
+
+device_initcall(idtcps_init);
+module_exit(idtcps_exit);
+
+MODULE_DESCRIPTION("IDT CPS Gen.1 Serial RapidIO switch family driver");
+MODULE_AUTHOR("Integrated Device Technology, Inc.");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/rapidio/switches/tsi568.c b/kernel/drivers/rapidio/switches/tsi568.c
new file mode 100644
index 000000000..8a43561b9
--- /dev/null
+++ b/kernel/drivers/rapidio/switches/tsi568.c
@@ -0,0 +1,199 @@
+/*
+ * RapidIO Tsi568 switch support
+ *
+ * Copyright 2009-2010 Integrated Device Technology, Inc.
+ * Alexandre Bounine <alexandre.bounine@idt.com>
+ *  - Added EM support
+ *  - Modified switch operations initialization.
+ *
+ * Copyright 2005 MontaVista Software, Inc.
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/rio.h>
+#include <linux/rio_drv.h>
+#include <linux/rio_ids.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include "../rio.h"
+
+/* Global (broadcast) route registers */
+#define SPBC_ROUTE_CFG_DESTID	0x10070
+#define SPBC_ROUTE_CFG_PORT	0x10074
+
+/* Per port route registers */
+#define SPP_ROUTE_CFG_DESTID(n)	(0x11070 + 0x100*n)
+#define SPP_ROUTE_CFG_PORT(n)	(0x11074 + 0x100*n)
+
+#define TSI568_SP_MODE(n)	(0x11004 + 0x100*n)
+#define  TSI568_SP_MODE_PW_DIS	0x08000000
+
+static int
+tsi568_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
+		       u16 table, u16 route_destid, u8 route_port)
+{
+	if (table == RIO_GLOBAL_TABLE) {
+		rio_mport_write_config_32(mport, destid, hopcount,
+					SPBC_ROUTE_CFG_DESTID, route_destid);
+		rio_mport_write_config_32(mport, destid, hopcount,
+					SPBC_ROUTE_CFG_PORT, route_port);
+	} else {
+		rio_mport_write_config_32(mport, destid, hopcount,
+					SPP_ROUTE_CFG_DESTID(table),
+					route_destid);
+		rio_mport_write_config_32(mport, destid, hopcount,
+					SPP_ROUTE_CFG_PORT(table), route_port);
+	}
+
+	udelay(10);
+
+	return 0;
+}
+
+static int
+tsi568_route_get_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
+		       u16 table, u16 route_destid, u8 *route_port)
+{
+	int ret = 0;
+	u32 result;
+
+	if (table == RIO_GLOBAL_TABLE) {
+		rio_mport_write_config_32(mport, destid, hopcount,
+					SPBC_ROUTE_CFG_DESTID, route_destid);
+		rio_mport_read_config_32(mport, destid, hopcount,
+					SPBC_ROUTE_CFG_PORT, &result);
+	} else {
+		rio_mport_write_config_32(mport, destid, hopcount,
+					SPP_ROUTE_CFG_DESTID(table),
+					route_destid);
+		rio_mport_read_config_32(mport, destid, hopcount,
+					SPP_ROUTE_CFG_PORT(table), &result);
+	}
+
+	*route_port = result;
+	if (*route_port > 15)
+		ret = -1;
+
+	return ret;
+}
+
+static int
+tsi568_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount,
+		       u16 table)
+{
+	u32 route_idx;
+	u32 lut_size;
+
+	lut_size = (mport->sys_size) ? 0x1ff : 0xff;
+
+	if (table == RIO_GLOBAL_TABLE) {
+		rio_mport_write_config_32(mport, destid, hopcount,
+					SPBC_ROUTE_CFG_DESTID, 0x80000000);
+		for (route_idx = 0; route_idx <= lut_size; route_idx++)
+			rio_mport_write_config_32(mport, destid, hopcount,
+						SPBC_ROUTE_CFG_PORT,
+						RIO_INVALID_ROUTE);
+	} else {
+		rio_mport_write_config_32(mport, destid, hopcount,
+					SPP_ROUTE_CFG_DESTID(table),
+					0x80000000);
+		for (route_idx = 0; route_idx <= lut_size; route_idx++)
+			rio_mport_write_config_32(mport, destid, hopcount,
+						SPP_ROUTE_CFG_PORT(table),
+						RIO_INVALID_ROUTE);
+	}
+
+	return 0;
+}
+
+static int
+tsi568_em_init(struct rio_dev *rdev)
+{
+	u32 regval;
+	int portnum;
+
+	pr_debug("TSI568 %s [%d:%d]\n", __func__, rdev->destid, rdev->hopcount);
+
+	/* Make sure that Port-Writes are disabled (for all ports) */
+	for (portnum = 0;
+	     portnum < RIO_GET_TOTAL_PORTS(rdev->swpinfo); portnum++) {
+		rio_read_config_32(rdev, TSI568_SP_MODE(portnum), &regval);
+		rio_write_config_32(rdev, TSI568_SP_MODE(portnum),
+				    regval | TSI568_SP_MODE_PW_DIS);
+	}
+
+	return 0;
+}
+
+static struct rio_switch_ops tsi568_switch_ops = {
+	.owner = THIS_MODULE,
+	.add_entry = tsi568_route_add_entry,
+	.get_entry = tsi568_route_get_entry,
+	.clr_table = tsi568_route_clr_table,
+	.set_domain = NULL,
+	.get_domain = NULL,
+	.em_init = tsi568_em_init,
+	.em_handle = NULL,
+};
+
+static int tsi568_probe(struct rio_dev *rdev, const struct rio_device_id *id)
+{
+	pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev));
+
+	spin_lock(&rdev->rswitch->lock);
+
+	if (rdev->rswitch->ops) {
+		spin_unlock(&rdev->rswitch->lock);
+		return -EINVAL;
+	}
+
+	rdev->rswitch->ops = &tsi568_switch_ops;
+	spin_unlock(&rdev->rswitch->lock);
+	return 0;
+}
+
+static void tsi568_remove(struct rio_dev *rdev)
+{
+	pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev));
+	spin_lock(&rdev->rswitch->lock);
+	if (rdev->rswitch->ops != &tsi568_switch_ops) {
+		spin_unlock(&rdev->rswitch->lock);
+		return;
+	}
+	rdev->rswitch->ops = NULL;
+	spin_unlock(&rdev->rswitch->lock);
+}
+
+static struct rio_device_id tsi568_id_table[] = {
+	{RIO_DEVICE(RIO_DID_TSI568, RIO_VID_TUNDRA)},
+	{ 0, }	/* terminate list */
+};
+
+static struct rio_driver tsi568_driver = {
+	.name = "tsi568",
+	.id_table = tsi568_id_table,
+	.probe = tsi568_probe,
+	.remove = tsi568_remove,
+};
+
+static int __init tsi568_init(void)
+{
+	return rio_register_driver(&tsi568_driver);
+}
+
+static void __exit tsi568_exit(void)
+{
+	rio_unregister_driver(&tsi568_driver);
+}
+
+device_initcall(tsi568_init);
+module_exit(tsi568_exit);
+
+MODULE_DESCRIPTION("IDT Tsi568 Serial RapidIO switch driver");
+MODULE_AUTHOR("Integrated Device Technology, Inc.");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/rapidio/switches/tsi57x.c b/kernel/drivers/rapidio/switches/tsi57x.c
new file mode 100644
index 000000000..42c8b014f
--- /dev/null
+++ b/kernel/drivers/rapidio/switches/tsi57x.c
@@ -0,0 +1,371 @@
+/*
+ * RapidIO Tsi57x switch family support
+ *
+ * Copyright 2009-2010 Integrated Device Technology, Inc.
+ * Alexandre Bounine <alexandre.bounine@idt.com>
+ *  - Added EM support
+ *  - Modified switch operations initialization.
+ *
+ * Copyright 2005 MontaVista Software, Inc.
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/rio.h>
+#include <linux/rio_drv.h>
+#include <linux/rio_ids.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include "../rio.h"
+
+/* Global (broadcast) route registers */
+#define SPBC_ROUTE_CFG_DESTID	0x10070
+#define SPBC_ROUTE_CFG_PORT	0x10074
+
+/* Per port route registers */
+#define SPP_ROUTE_CFG_DESTID(n)	(0x11070 + 0x100*n)
+#define SPP_ROUTE_CFG_PORT(n)	(0x11074 + 0x100*n)
+
+#define TSI578_SP_MODE(n)	(0x11004 + n*0x100)
+#define TSI578_SP_MODE_GLBL	0x10004
+#define  TSI578_SP_MODE_PW_DIS	0x08000000
+#define  TSI578_SP_MODE_LUT_512	0x01000000
+
+#define TSI578_SP_CTL_INDEP(n)	(0x13004 + n*0x100)
+#define TSI578_SP_LUT_PEINF(n)	(0x13010 + n*0x100)
+#define TSI578_SP_CS_TX(n)	(0x13014 + n*0x100)
+#define TSI578_SP_INT_STATUS(n) (0x13018 + n*0x100)
+
+#define TSI578_GLBL_ROUTE_BASE	0x10078
+
+static int
+tsi57x_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
+		       u16 table, u16 route_destid, u8 route_port)
+{
+	if (table == RIO_GLOBAL_TABLE) {
+		rio_mport_write_config_32(mport, destid, hopcount,
+					  SPBC_ROUTE_CFG_DESTID, route_destid);
+		rio_mport_write_config_32(mport, destid, hopcount,
+					  SPBC_ROUTE_CFG_PORT, route_port);
+	} else {
+		rio_mport_write_config_32(mport, destid, hopcount,
+				SPP_ROUTE_CFG_DESTID(table), route_destid);
+		rio_mport_write_config_32(mport, destid, hopcount,
+				SPP_ROUTE_CFG_PORT(table), route_port);
+	}
+
+	udelay(10);
+
+	return 0;
+}
+
+static int
+tsi57x_route_get_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
+		       u16 table, u16 route_destid, u8 *route_port)
+{
+	int ret = 0;
+	u32 result;
+
+	if (table == RIO_GLOBAL_TABLE) {
+		/* Use local RT of the ingress port to avoid possible
+		   race condition */
+		rio_mport_read_config_32(mport, destid, hopcount,
+			RIO_SWP_INFO_CAR, &result);
+		table = (result & RIO_SWP_INFO_PORT_NUM_MASK);
+	}
+
+	rio_mport_write_config_32(mport, destid, hopcount,
+				SPP_ROUTE_CFG_DESTID(table), route_destid);
+	rio_mport_read_config_32(mport, destid, hopcount,
+				SPP_ROUTE_CFG_PORT(table), &result);
+
+	*route_port = (u8)result;
+	if (*route_port > 15)
+		ret = -1;
+
+	return ret;
+}
+
+static int
+tsi57x_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount,
+		       u16 table)
+{
+	u32 route_idx;
+	u32 lut_size;
+
+	lut_size = (mport->sys_size) ? 0x1ff : 0xff;
+
+	if (table == RIO_GLOBAL_TABLE) {
+		rio_mport_write_config_32(mport, destid, hopcount,
+					  SPBC_ROUTE_CFG_DESTID, 0x80000000);
+		for (route_idx = 0; route_idx <= lut_size; route_idx++)
+			rio_mport_write_config_32(mport, destid, hopcount,
+						  SPBC_ROUTE_CFG_PORT,
+						  RIO_INVALID_ROUTE);
+	} else {
+		rio_mport_write_config_32(mport, destid, hopcount,
+				SPP_ROUTE_CFG_DESTID(table), 0x80000000);
+		for (route_idx = 0; route_idx <= lut_size; route_idx++)
+			rio_mport_write_config_32(mport, destid, hopcount,
+				SPP_ROUTE_CFG_PORT(table) , RIO_INVALID_ROUTE);
+	}
+
+	return 0;
+}
+
+static int
+tsi57x_set_domain(struct rio_mport *mport, u16 destid, u8 hopcount,
+		       u8 sw_domain)
+{
+	u32 regval;
+
+	/*
+	 * Switch domain configuration operates only at global level
+	 */
+
+	/* Turn off flat (LUT_512) mode */
+	rio_mport_read_config_32(mport, destid, hopcount,
+				 TSI578_SP_MODE_GLBL, &regval);
+	rio_mport_write_config_32(mport, destid, hopcount, TSI578_SP_MODE_GLBL,
+				  regval & ~TSI578_SP_MODE_LUT_512);
+	/* Set switch domain base */
+	rio_mport_write_config_32(mport, destid, hopcount,
+				  TSI578_GLBL_ROUTE_BASE,
+				  (u32)(sw_domain << 24));
+	return 0;
+}
+
+static int
+tsi57x_get_domain(struct rio_mport *mport, u16 destid, u8 hopcount,
+		       u8 *sw_domain)
+{
+	u32 regval;
+
+	/*
+	 * Switch domain configuration operates only at global level
+	 */
+	rio_mport_read_config_32(mport, destid, hopcount,
+				TSI578_GLBL_ROUTE_BASE, &regval);
+
+	*sw_domain = (u8)(regval >> 24);
+
+	return 0;
+}
+
+static int
+tsi57x_em_init(struct rio_dev *rdev)
+{
+	u32 regval;
+	int portnum;
+
+	pr_debug("TSI578 %s [%d:%d]\n", __func__, rdev->destid, rdev->hopcount);
+
+	for (portnum = 0;
+	     portnum < RIO_GET_TOTAL_PORTS(rdev->swpinfo); portnum++) {
+		/* Make sure that Port-Writes are enabled (for all ports) */
+		rio_read_config_32(rdev,
+				TSI578_SP_MODE(portnum), &regval);
+		rio_write_config_32(rdev,
+				TSI578_SP_MODE(portnum),
+				regval & ~TSI578_SP_MODE_PW_DIS);
+
+		/* Clear all pending interrupts */
+		rio_read_config_32(rdev,
+				rdev->phys_efptr +
+					RIO_PORT_N_ERR_STS_CSR(portnum),
+				&regval);
+		rio_write_config_32(rdev,
+				rdev->phys_efptr +
+					RIO_PORT_N_ERR_STS_CSR(portnum),
+				regval & 0x07120214);
+
+		rio_read_config_32(rdev,
+				TSI578_SP_INT_STATUS(portnum), &regval);
+		rio_write_config_32(rdev,
+				TSI578_SP_INT_STATUS(portnum),
+				regval & 0x000700bd);
+
+		/* Enable all interrupts to allow ports to send a port-write */
+		rio_read_config_32(rdev,
+				TSI578_SP_CTL_INDEP(portnum), &regval);
+		rio_write_config_32(rdev,
+				TSI578_SP_CTL_INDEP(portnum),
+				regval | 0x000b0000);
+
+		/* Skip next (odd) port if the current port is in x4 mode */
+		rio_read_config_32(rdev,
+				rdev->phys_efptr + RIO_PORT_N_CTL_CSR(portnum),
+				&regval);
+		if ((regval & RIO_PORT_N_CTL_PWIDTH) == RIO_PORT_N_CTL_PWIDTH_4)
+			portnum++;
+	}
+
+	/* set TVAL = ~50us */
+	rio_write_config_32(rdev,
+		rdev->phys_efptr + RIO_PORT_LINKTO_CTL_CSR, 0x9a << 8);
+
+	return 0;
+}
+
+static int
+tsi57x_em_handler(struct rio_dev *rdev, u8 portnum)
+{
+	struct rio_mport *mport = rdev->net->hport;
+	u32 intstat, err_status;
+	int sendcount, checkcount;
+	u8 route_port;
+	u32 regval;
+
+	rio_read_config_32(rdev,
+			rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(portnum),
+			&err_status);
+
+	if ((err_status & RIO_PORT_N_ERR_STS_PORT_OK) &&
+	    (err_status & (RIO_PORT_N_ERR_STS_PW_OUT_ES |
+			  RIO_PORT_N_ERR_STS_PW_INP_ES))) {
+		/* Remove any queued packets by locking/unlocking port */
+		rio_read_config_32(rdev,
+			rdev->phys_efptr + RIO_PORT_N_CTL_CSR(portnum),
+			&regval);
+		if (!(regval & RIO_PORT_N_CTL_LOCKOUT)) {
+			rio_write_config_32(rdev,
+				rdev->phys_efptr + RIO_PORT_N_CTL_CSR(portnum),
+				regval | RIO_PORT_N_CTL_LOCKOUT);
+			udelay(50);
+			rio_write_config_32(rdev,
+				rdev->phys_efptr + RIO_PORT_N_CTL_CSR(portnum),
+				regval);
+		}
+
+		/* Read from link maintenance response register to clear
+		 * valid bit
+		 */
+		rio_read_config_32(rdev,
+			rdev->phys_efptr + RIO_PORT_N_MNT_RSP_CSR(portnum),
+			&regval);
+
+		/* Send a Packet-Not-Accepted/Link-Request-Input-Status control
+		 * symbol to recover from IES/OES
+		 */
+		sendcount = 3;
+		while (sendcount) {
+			rio_write_config_32(rdev,
+					  TSI578_SP_CS_TX(portnum), 0x40fc8000);
+			checkcount = 3;
+			while (checkcount--) {
+				udelay(50);
+				rio_read_config_32(rdev,
+					rdev->phys_efptr +
+						RIO_PORT_N_MNT_RSP_CSR(portnum),
+					&regval);
+				if (regval & RIO_PORT_N_MNT_RSP_RVAL)
+					goto exit_es;
+			}
+
+			sendcount--;
+		}
+	}
+
+exit_es:
+	/* Clear implementation specific error status bits */
+	rio_read_config_32(rdev, TSI578_SP_INT_STATUS(portnum), &intstat);
+	pr_debug("TSI578[%x:%x] SP%d_INT_STATUS=0x%08x\n",
+		 rdev->destid, rdev->hopcount, portnum, intstat);
+
+	if (intstat & 0x10000) {
+		rio_read_config_32(rdev,
+				TSI578_SP_LUT_PEINF(portnum), &regval);
+		regval = (mport->sys_size) ? (regval >> 16) : (regval >> 24);
+		route_port = rdev->rswitch->route_table[regval];
+		pr_debug("RIO: TSI578[%s] P%d LUT Parity Error (destID=%d)\n",
+			rio_name(rdev), portnum, regval);
+		tsi57x_route_add_entry(mport, rdev->destid, rdev->hopcount,
+				RIO_GLOBAL_TABLE, regval, route_port);
+	}
+
+	rio_write_config_32(rdev, TSI578_SP_INT_STATUS(portnum),
+			    intstat & 0x000700bd);
+
+	return 0;
+}
+
+static struct rio_switch_ops tsi57x_switch_ops = {
+	.owner = THIS_MODULE,
+	.add_entry = tsi57x_route_add_entry,
+	.get_entry = tsi57x_route_get_entry,
+	.clr_table = tsi57x_route_clr_table,
+	.set_domain = tsi57x_set_domain,
+	.get_domain = tsi57x_get_domain,
+	.em_init = tsi57x_em_init,
+	.em_handle = tsi57x_em_handler,
+};
+
+static int tsi57x_probe(struct rio_dev *rdev, const struct rio_device_id *id)
+{
+	pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev));
+
+	spin_lock(&rdev->rswitch->lock);
+
+	if (rdev->rswitch->ops) {
+		spin_unlock(&rdev->rswitch->lock);
+		return -EINVAL;
+	}
+	rdev->rswitch->ops = &tsi57x_switch_ops;
+
+	if (rdev->do_enum) {
+		/* Ensure that default routing is disabled on startup */
+		rio_write_config_32(rdev, RIO_STD_RTE_DEFAULT_PORT,
+				    RIO_INVALID_ROUTE);
+	}
+
+	spin_unlock(&rdev->rswitch->lock);
+	return 0;
+}
+
+static void tsi57x_remove(struct rio_dev *rdev)
+{
+	pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev));
+	spin_lock(&rdev->rswitch->lock);
+	if (rdev->rswitch->ops != &tsi57x_switch_ops) {
+		spin_unlock(&rdev->rswitch->lock);
+		return;
+	}
+	rdev->rswitch->ops = NULL;
+	spin_unlock(&rdev->rswitch->lock);
+}
+
+static struct rio_device_id tsi57x_id_table[] = {
+	{RIO_DEVICE(RIO_DID_TSI572, RIO_VID_TUNDRA)},
+	{RIO_DEVICE(RIO_DID_TSI574, RIO_VID_TUNDRA)},
+	{RIO_DEVICE(RIO_DID_TSI577, RIO_VID_TUNDRA)},
+	{RIO_DEVICE(RIO_DID_TSI578, RIO_VID_TUNDRA)},
+	{ 0, }	/* terminate list */
+};
+
+static struct rio_driver tsi57x_driver = {
+	.name = "tsi57x",
+	.id_table = tsi57x_id_table,
+	.probe = tsi57x_probe,
+	.remove = tsi57x_remove,
+};
+
+static int __init tsi57x_init(void)
+{
+	return rio_register_driver(&tsi57x_driver);
+}
+
+static void __exit tsi57x_exit(void)
+{
+	rio_unregister_driver(&tsi57x_driver);
+}
+
+device_initcall(tsi57x_init);
+module_exit(tsi57x_exit);
+
+MODULE_DESCRIPTION("IDT Tsi57x Serial RapidIO switch family driver");
+MODULE_AUTHOR("Integrated Device Technology, Inc.");
+MODULE_LICENSE("GPL");