Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

41 files changed, 11999 insertions, 0 deletions

diff --git a/kernel/drivers/pwm/Kconfig b/kernel/drivers/pwm/Kconfig
new file mode 100644
index 000000000..b1541f40f
--- /dev/null
+++ b/kernel/drivers/pwm/Kconfig
@@ -0,0 +1,376 @@
+menuconfig PWM
+	bool "Pulse-Width Modulation (PWM) Support"
+	help
+	  Generic Pulse-Width Modulation (PWM) support.
+
+	  In Pulse-Width Modulation, a variation of the width of pulses
+	  in a rectangular pulse signal is used as a means to alter the
+	  average power of the signal. Applications include efficient
+	  power delivery and voltage regulation. In computer systems,
+	  PWMs are commonly used to control fans or the brightness of
+	  display backlights.
+
+	  This framework provides a generic interface to PWM devices
+	  within the Linux kernel. On the driver side it provides an API
+	  to register and unregister a PWM chip, an abstraction of a PWM
+	  controller, that supports one or more PWM devices. Client
+	  drivers can request PWM devices and use the generic framework
+	  to configure as well as enable and disable them.
+
+	  This generic framework replaces the legacy PWM framework which
+	  allows only a single driver implementing the required API. Not
+	  all legacy implementations have been ported to the framework
+	  yet. The framework provides an API that is backward compatible
+	  with the legacy framework so that existing client drivers
+	  continue to work as expected.
+
+	  If unsure, say no.
+
+if PWM
+
+config PWM_SYSFS
+	bool
+	default y if SYSFS
+
+config PWM_AB8500
+	tristate "AB8500 PWM support"
+	depends on AB8500_CORE && ARCH_U8500
+	help
+	  Generic PWM framework driver for Analog Baseband AB8500.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-ab8500.
+
+config PWM_ATMEL
+	tristate "Atmel PWM support"
+	depends on ARCH_AT91 || AVR32
+	help
+	  Generic PWM framework driver for Atmel SoC.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-atmel.
+
+config PWM_ATMEL_HLCDC_PWM
+	tristate "Atmel HLCDC PWM support"
+	depends on MFD_ATMEL_HLCDC
+	depends on HAVE_CLK
+	help
+	  Generic PWM framework driver for the PWM output of the HLCDC
+	  (Atmel High-end LCD Controller). This PWM output is mainly used
+	  to control the LCD backlight.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-atmel-hlcdc.
+
+config PWM_ATMEL_TCB
+	tristate "Atmel TC Block PWM support"
+	depends on ATMEL_TCLIB && OF
+	help
+	  Generic PWM framework driver for Atmel Timer Counter Block.
+
+	  A Timer Counter Block provides 6 PWM devices grouped by 2.
+	  Devices in a given group must have the same period.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-atmel-tcb.
+
+config PWM_BCM_KONA
+	tristate "Kona PWM support"
+	depends on ARCH_BCM_MOBILE
+	help
+	  Generic PWM framework driver for Broadcom Kona PWM block.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-bcm-kona.
+
+config PWM_BCM2835
+	tristate "BCM2835 PWM support"
+	depends on ARCH_BCM2835
+	help
+	  PWM framework driver for BCM2835 controller (Raspberry Pi)
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-bcm2835.
+
+config PWM_BFIN
+	tristate "Blackfin PWM support"
+	depends on BFIN_GPTIMERS
+	help
+	  Generic PWM framework driver for Blackfin.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-bfin.
+
+config PWM_CLPS711X
+	tristate "CLPS711X PWM support"
+	depends on ARCH_CLPS711X || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  Generic PWM framework driver for Cirrus Logic CLPS711X.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-clps711x.
+
+config PWM_EP93XX
+	tristate "Cirrus Logic EP93xx PWM support"
+	depends on ARCH_EP93XX
+	help
+	  Generic PWM framework driver for Cirrus Logic EP93xx.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-ep93xx.
+
+config PWM_FSL_FTM
+	tristate "Freescale FlexTimer Module (FTM) PWM support"
+	depends on OF
+	select REGMAP_MMIO
+	help
+	  Generic FTM PWM framework driver for Freescale VF610 and
+	  Layerscape LS-1 SoCs.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-fsl-ftm.
+
+config PWM_IMG
+	tristate "Imagination Technologies PWM driver"
+	depends on HAS_IOMEM
+	depends on MFD_SYSCON
+	depends on COMMON_CLK
+	depends on MIPS || COMPILE_TEST
+	help
+	  Generic PWM framework driver for Imagination Technologies
+	  PWM block which supports 4 channels.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-img
+
+config PWM_IMX
+	tristate "i.MX PWM support"
+	depends on ARCH_MXC
+	help
+	  Generic PWM framework driver for i.MX.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-imx.
+
+config PWM_JZ4740
+	tristate "Ingenic JZ4740 PWM support"
+	depends on MACH_JZ4740
+	help
+	  Generic PWM framework driver for Ingenic JZ4740 based
+	  machines.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-jz4740.
+
+config PWM_LP3943
+	tristate "TI/National Semiconductor LP3943 PWM support"
+	depends on MFD_LP3943
+	help
+	  Generic PWM framework driver for LP3943 which supports two PWM
+	  channels.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-lp3943.
+
+config PWM_LPC32XX
+	tristate "LPC32XX PWM support"
+	depends on ARCH_LPC32XX
+	help
+	  Generic PWM framework driver for LPC32XX. The LPC32XX SOC has two
+	  PWM controllers.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-lpc32xx.
+
+config PWM_LPSS
+	tristate "Intel LPSS PWM support"
+	depends on X86
+	help
+	  Generic PWM framework driver for Intel Low Power Subsystem PWM
+	  controller.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-lpss.
+
+config PWM_LPSS_PCI
+	tristate "Intel LPSS PWM PCI driver"
+	depends on PWM_LPSS && PCI
+	help
+	  The PCI driver for Intel Low Power Subsystem PWM controller.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-lpss-pci.
+
+config PWM_LPSS_PLATFORM
+	tristate "Intel LPSS PWM platform driver"
+	depends on PWM_LPSS && ACPI
+	help
+	  The platform driver for Intel Low Power Subsystem PWM controller.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-lpss-platform.
+
+config PWM_MXS
+	tristate "Freescale MXS PWM support"
+	depends on ARCH_MXS && OF
+	select STMP_DEVICE
+	help
+	  Generic PWM framework driver for Freescale MXS.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-mxs.
+
+config PWM_PCA9685
+	tristate "NXP PCA9685 PWM driver"
+	depends on OF && I2C
+	select REGMAP_I2C
+	help
+	  Generic PWM framework driver for NXP PCA9685 LED controller.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-pca9685.
+
+config PWM_PUV3
+	tristate "PKUnity NetBook-0916 PWM support"
+	depends on ARCH_PUV3
+	help
+	  Generic PWM framework driver for PKUnity NetBook-0916.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-puv3.
+
+config PWM_PXA
+	tristate "PXA PWM support"
+	depends on ARCH_PXA
+	help
+	  Generic PWM framework driver for PXA.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-pxa.
+
+config PWM_RENESAS_TPU
+	tristate "Renesas TPU PWM support"
+	depends on ARCH_SHMOBILE || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  This driver exposes the Timer Pulse Unit (TPU) PWM controller found
+	  in Renesas chips through the PWM API.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-renesas-tpu.
+
+config PWM_ROCKCHIP
+	tristate "Rockchip PWM support"
+	depends on ARCH_ROCKCHIP
+	help
+	  Generic PWM framework driver for the PWM controller found on
+	  Rockchip SoCs.
+
+config PWM_SAMSUNG
+	tristate "Samsung PWM support"
+	depends on PLAT_SAMSUNG || ARCH_EXYNOS
+	help
+	  Generic PWM framework driver for Samsung.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-samsung.
+
+config PWM_SPEAR
+	tristate "STMicroelectronics SPEAr PWM support"
+	depends on PLAT_SPEAR
+	depends on OF
+	help
+	  Generic PWM framework driver for the PWM controller on ST
+	  SPEAr SoCs.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-spear.
+
+config PWM_STI
+	tristate "STiH4xx PWM support"
+	depends on ARCH_STI
+	depends on OF
+	help
+	  Generic PWM framework driver for STiH4xx SoCs.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-sti.
+
+config PWM_SUN4I
+	tristate "Allwinner PWM support"
+	depends on ARCH_SUNXI || COMPILE_TEST
+	depends on HAS_IOMEM && COMMON_CLK
+	help
+	  Generic PWM framework driver for Allwinner SoCs.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-sun4i.
+
+config PWM_TEGRA
+	tristate "NVIDIA Tegra PWM support"
+	depends on ARCH_TEGRA
+	help
+	  Generic PWM framework driver for the PWFM controller found on NVIDIA
+	  Tegra SoCs.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-tegra.
+
+config  PWM_TIECAP
+	tristate "ECAP PWM support"
+	depends on SOC_AM33XX || ARCH_DAVINCI_DA8XX
+	help
+	  PWM driver support for the ECAP APWM controller found on AM33XX
+	  TI SOC
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-tiecap.
+
+config  PWM_TIEHRPWM
+	tristate "EHRPWM PWM support"
+	depends on SOC_AM33XX || ARCH_DAVINCI_DA8XX
+	help
+	  PWM driver support for the EHRPWM controller found on AM33XX
+	  TI SOC
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-tiehrpwm.
+
+config  PWM_TIPWMSS
+	bool
+	default y if SOC_AM33XX && (PWM_TIECAP || PWM_TIEHRPWM)
+	help
+	  PWM Subsystem driver support for AM33xx SOC.
+
+	  PWM submodules require PWM config space access from submodule
+	  drivers and require common parent driver support.
+
+config PWM_TWL
+	tristate "TWL4030/6030 PWM support"
+	depends on TWL4030_CORE
+	help
+	  Generic PWM framework driver for TWL4030/6030.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-twl.
+
+config PWM_TWL_LED
+	tristate "TWL4030/6030 PWM support for LED drivers"
+	depends on TWL4030_CORE
+	help
+	  Generic PWM framework driver for TWL4030/6030 LED terminals.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-twl-led.
+
+config PWM_VT8500
+	tristate "vt8500 PWM support"
+	depends on ARCH_VT8500
+	help
+	  Generic PWM framework driver for vt8500.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-vt8500.
+
+endif
diff --git a/kernel/drivers/pwm/Makefile b/kernel/drivers/pwm/Makefile
new file mode 100644
index 000000000..ec50eb5b5
--- /dev/null
+++ b/kernel/drivers/pwm/Makefile
@@ -0,0 +1,37 @@
+obj-$(CONFIG_PWM)		+= core.o
+obj-$(CONFIG_PWM_SYSFS)		+= sysfs.o
+obj-$(CONFIG_PWM_AB8500)	+= pwm-ab8500.o
+obj-$(CONFIG_PWM_ATMEL)		+= pwm-atmel.o
+obj-$(CONFIG_PWM_ATMEL_HLCDC_PWM)	+= pwm-atmel-hlcdc.o
+obj-$(CONFIG_PWM_ATMEL_TCB)	+= pwm-atmel-tcb.o
+obj-$(CONFIG_PWM_BCM_KONA)	+= pwm-bcm-kona.o
+obj-$(CONFIG_PWM_BCM2835)	+= pwm-bcm2835.o
+obj-$(CONFIG_PWM_BFIN)		+= pwm-bfin.o
+obj-$(CONFIG_PWM_CLPS711X)	+= pwm-clps711x.o
+obj-$(CONFIG_PWM_EP93XX)	+= pwm-ep93xx.o
+obj-$(CONFIG_PWM_FSL_FTM)	+= pwm-fsl-ftm.o
+obj-$(CONFIG_PWM_IMG)		+= pwm-img.o
+obj-$(CONFIG_PWM_IMX)		+= pwm-imx.o
+obj-$(CONFIG_PWM_JZ4740)	+= pwm-jz4740.o
+obj-$(CONFIG_PWM_LP3943)	+= pwm-lp3943.o
+obj-$(CONFIG_PWM_LPC32XX)	+= pwm-lpc32xx.o
+obj-$(CONFIG_PWM_LPSS)		+= pwm-lpss.o
+obj-$(CONFIG_PWM_LPSS_PCI)	+= pwm-lpss-pci.o
+obj-$(CONFIG_PWM_LPSS_PLATFORM)	+= pwm-lpss-platform.o
+obj-$(CONFIG_PWM_MXS)		+= pwm-mxs.o
+obj-$(CONFIG_PWM_PCA9685)	+= pwm-pca9685.o
+obj-$(CONFIG_PWM_PUV3)		+= pwm-puv3.o
+obj-$(CONFIG_PWM_PXA)		+= pwm-pxa.o
+obj-$(CONFIG_PWM_RENESAS_TPU)	+= pwm-renesas-tpu.o
+obj-$(CONFIG_PWM_ROCKCHIP)	+= pwm-rockchip.o
+obj-$(CONFIG_PWM_SAMSUNG)	+= pwm-samsung.o
+obj-$(CONFIG_PWM_SPEAR)		+= pwm-spear.o
+obj-$(CONFIG_PWM_STI)		+= pwm-sti.o
+obj-$(CONFIG_PWM_SUN4I)		+= pwm-sun4i.o
+obj-$(CONFIG_PWM_TEGRA)		+= pwm-tegra.o
+obj-$(CONFIG_PWM_TIECAP)	+= pwm-tiecap.o
+obj-$(CONFIG_PWM_TIEHRPWM)	+= pwm-tiehrpwm.o
+obj-$(CONFIG_PWM_TIPWMSS)	+= pwm-tipwmss.o
+obj-$(CONFIG_PWM_TWL)		+= pwm-twl.o
+obj-$(CONFIG_PWM_TWL_LED)	+= pwm-twl-led.o
+obj-$(CONFIG_PWM_VT8500)	+= pwm-vt8500.o
diff --git a/kernel/drivers/pwm/core.c b/kernel/drivers/pwm/core.c
new file mode 100644
index 000000000..ba34c7d89
--- /dev/null
+++ b/kernel/drivers/pwm/core.c
@@ -0,0 +1,895 @@
+/*
+ * Generic pwmlib implementation
+ *
+ * Copyright (C) 2011 Sascha Hauer <s.hauer@pengutronix.de>
+ * Copyright (C) 2011-2012 Avionic Design GmbH
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2, or (at your option)
+ *  any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; see the file COPYING.  If not, write to
+ *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/pwm.h>
+#include <linux/radix-tree.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+
+#include <dt-bindings/pwm/pwm.h>
+
+#define MAX_PWMS 1024
+
+static DEFINE_MUTEX(pwm_lookup_lock);
+static LIST_HEAD(pwm_lookup_list);
+static DEFINE_MUTEX(pwm_lock);
+static LIST_HEAD(pwm_chips);
+static DECLARE_BITMAP(allocated_pwms, MAX_PWMS);
+static RADIX_TREE(pwm_tree, GFP_KERNEL);
+
+static struct pwm_device *pwm_to_device(unsigned int pwm)
+{
+	return radix_tree_lookup(&pwm_tree, pwm);
+}
+
+static int alloc_pwms(int pwm, unsigned int count)
+{
+	unsigned int from = 0;
+	unsigned int start;
+
+	if (pwm >= MAX_PWMS)
+		return -EINVAL;
+
+	if (pwm >= 0)
+		from = pwm;
+
+	start = bitmap_find_next_zero_area(allocated_pwms, MAX_PWMS, from,
+					   count, 0);
+
+	if (pwm >= 0 && start != pwm)
+		return -EEXIST;
+
+	if (start + count > MAX_PWMS)
+		return -ENOSPC;
+
+	return start;
+}
+
+static void free_pwms(struct pwm_chip *chip)
+{
+	unsigned int i;
+
+	for (i = 0; i < chip->npwm; i++) {
+		struct pwm_device *pwm = &chip->pwms[i];
+		radix_tree_delete(&pwm_tree, pwm->pwm);
+	}
+
+	bitmap_clear(allocated_pwms, chip->base, chip->npwm);
+
+	kfree(chip->pwms);
+	chip->pwms = NULL;
+}
+
+static struct pwm_chip *pwmchip_find_by_name(const char *name)
+{
+	struct pwm_chip *chip;
+
+	if (!name)
+		return NULL;
+
+	mutex_lock(&pwm_lock);
+
+	list_for_each_entry(chip, &pwm_chips, list) {
+		const char *chip_name = dev_name(chip->dev);
+
+		if (chip_name && strcmp(chip_name, name) == 0) {
+			mutex_unlock(&pwm_lock);
+			return chip;
+		}
+	}
+
+	mutex_unlock(&pwm_lock);
+
+	return NULL;
+}
+
+static int pwm_device_request(struct pwm_device *pwm, const char *label)
+{
+	int err;
+
+	if (test_bit(PWMF_REQUESTED, &pwm->flags))
+		return -EBUSY;
+
+	if (!try_module_get(pwm->chip->ops->owner))
+		return -ENODEV;
+
+	if (pwm->chip->ops->request) {
+		err = pwm->chip->ops->request(pwm->chip, pwm);
+		if (err) {
+			module_put(pwm->chip->ops->owner);
+			return err;
+		}
+	}
+
+	set_bit(PWMF_REQUESTED, &pwm->flags);
+	pwm->label = label;
+
+	return 0;
+}
+
+struct pwm_device *
+of_pwm_xlate_with_flags(struct pwm_chip *pc, const struct of_phandle_args *args)
+{
+	struct pwm_device *pwm;
+
+	if (pc->of_pwm_n_cells < 3)
+		return ERR_PTR(-EINVAL);
+
+	if (args->args[0] >= pc->npwm)
+		return ERR_PTR(-EINVAL);
+
+	pwm = pwm_request_from_chip(pc, args->args[0], NULL);
+	if (IS_ERR(pwm))
+		return pwm;
+
+	pwm_set_period(pwm, args->args[1]);
+
+	if (args->args[2] & PWM_POLARITY_INVERTED)
+		pwm_set_polarity(pwm, PWM_POLARITY_INVERSED);
+	else
+		pwm_set_polarity(pwm, PWM_POLARITY_NORMAL);
+
+	return pwm;
+}
+EXPORT_SYMBOL_GPL(of_pwm_xlate_with_flags);
+
+static struct pwm_device *
+of_pwm_simple_xlate(struct pwm_chip *pc, const struct of_phandle_args *args)
+{
+	struct pwm_device *pwm;
+
+	if (pc->of_pwm_n_cells < 2)
+		return ERR_PTR(-EINVAL);
+
+	if (args->args[0] >= pc->npwm)
+		return ERR_PTR(-EINVAL);
+
+	pwm = pwm_request_from_chip(pc, args->args[0], NULL);
+	if (IS_ERR(pwm))
+		return pwm;
+
+	pwm_set_period(pwm, args->args[1]);
+
+	return pwm;
+}
+
+static void of_pwmchip_add(struct pwm_chip *chip)
+{
+	if (!chip->dev || !chip->dev->of_node)
+		return;
+
+	if (!chip->of_xlate) {
+		chip->of_xlate = of_pwm_simple_xlate;
+		chip->of_pwm_n_cells = 2;
+	}
+
+	of_node_get(chip->dev->of_node);
+}
+
+static void of_pwmchip_remove(struct pwm_chip *chip)
+{
+	if (chip->dev)
+		of_node_put(chip->dev->of_node);
+}
+
+/**
+ * pwm_set_chip_data() - set private chip data for a PWM
+ * @pwm: PWM device
+ * @data: pointer to chip-specific data
+ */
+int pwm_set_chip_data(struct pwm_device *pwm, void *data)
+{
+	if (!pwm)
+		return -EINVAL;
+
+	pwm->chip_data = data;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(pwm_set_chip_data);
+
+/**
+ * pwm_get_chip_data() - get private chip data for a PWM
+ * @pwm: PWM device
+ */
+void *pwm_get_chip_data(struct pwm_device *pwm)
+{
+	return pwm ? pwm->chip_data : NULL;
+}
+EXPORT_SYMBOL_GPL(pwm_get_chip_data);
+
+/**
+ * pwmchip_add() - register a new PWM chip
+ * @chip: the PWM chip to add
+ *
+ * Register a new PWM chip. If chip->base < 0 then a dynamically assigned base
+ * will be used.
+ */
+int pwmchip_add(struct pwm_chip *chip)
+{
+	struct pwm_device *pwm;
+	unsigned int i;
+	int ret;
+
+	if (!chip || !chip->dev || !chip->ops || !chip->ops->config ||
+	    !chip->ops->enable || !chip->ops->disable || !chip->npwm)
+		return -EINVAL;
+
+	mutex_lock(&pwm_lock);
+
+	ret = alloc_pwms(chip->base, chip->npwm);
+	if (ret < 0)
+		goto out;
+
+	chip->pwms = kzalloc(chip->npwm * sizeof(*pwm), GFP_KERNEL);
+	if (!chip->pwms) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	chip->base = ret;
+
+	for (i = 0; i < chip->npwm; i++) {
+		pwm = &chip->pwms[i];
+
+		pwm->chip = chip;
+		pwm->pwm = chip->base + i;
+		pwm->hwpwm = i;
+
+		radix_tree_insert(&pwm_tree, pwm->pwm, pwm);
+	}
+
+	bitmap_set(allocated_pwms, chip->base, chip->npwm);
+
+	INIT_LIST_HEAD(&chip->list);
+	list_add(&chip->list, &pwm_chips);
+
+	ret = 0;
+
+	if (IS_ENABLED(CONFIG_OF))
+		of_pwmchip_add(chip);
+
+	pwmchip_sysfs_export(chip);
+
+out:
+	mutex_unlock(&pwm_lock);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(pwmchip_add);
+
+/**
+ * pwmchip_remove() - remove a PWM chip
+ * @chip: the PWM chip to remove
+ *
+ * Removes a PWM chip. This function may return busy if the PWM chip provides
+ * a PWM device that is still requested.
+ */
+int pwmchip_remove(struct pwm_chip *chip)
+{
+	unsigned int i;
+	int ret = 0;
+
+	mutex_lock(&pwm_lock);
+
+	for (i = 0; i < chip->npwm; i++) {
+		struct pwm_device *pwm = &chip->pwms[i];
+
+		if (test_bit(PWMF_REQUESTED, &pwm->flags)) {
+			ret = -EBUSY;
+			goto out;
+		}
+	}
+
+	list_del_init(&chip->list);
+
+	if (IS_ENABLED(CONFIG_OF))
+		of_pwmchip_remove(chip);
+
+	free_pwms(chip);
+
+	pwmchip_sysfs_unexport(chip);
+
+out:
+	mutex_unlock(&pwm_lock);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(pwmchip_remove);
+
+/**
+ * pwm_request() - request a PWM device
+ * @pwm_id: global PWM device index
+ * @label: PWM device label
+ *
+ * This function is deprecated, use pwm_get() instead.
+ */
+struct pwm_device *pwm_request(int pwm, const char *label)
+{
+	struct pwm_device *dev;
+	int err;
+
+	if (pwm < 0 || pwm >= MAX_PWMS)
+		return ERR_PTR(-EINVAL);
+
+	mutex_lock(&pwm_lock);
+
+	dev = pwm_to_device(pwm);
+	if (!dev) {
+		dev = ERR_PTR(-EPROBE_DEFER);
+		goto out;
+	}
+
+	err = pwm_device_request(dev, label);
+	if (err < 0)
+		dev = ERR_PTR(err);
+
+out:
+	mutex_unlock(&pwm_lock);
+
+	return dev;
+}
+EXPORT_SYMBOL_GPL(pwm_request);
+
+/**
+ * pwm_request_from_chip() - request a PWM device relative to a PWM chip
+ * @chip: PWM chip
+ * @index: per-chip index of the PWM to request
+ * @label: a literal description string of this PWM
+ *
+ * Returns the PWM at the given index of the given PWM chip. A negative error
+ * code is returned if the index is not valid for the specified PWM chip or
+ * if the PWM device cannot be requested.
+ */
+struct pwm_device *pwm_request_from_chip(struct pwm_chip *chip,
+					 unsigned int index,
+					 const char *label)
+{
+	struct pwm_device *pwm;
+	int err;
+
+	if (!chip || index >= chip->npwm)
+		return ERR_PTR(-EINVAL);
+
+	mutex_lock(&pwm_lock);
+	pwm = &chip->pwms[index];
+
+	err = pwm_device_request(pwm, label);
+	if (err < 0)
+		pwm = ERR_PTR(err);
+
+	mutex_unlock(&pwm_lock);
+	return pwm;
+}
+EXPORT_SYMBOL_GPL(pwm_request_from_chip);
+
+/**
+ * pwm_free() - free a PWM device
+ * @pwm: PWM device
+ *
+ * This function is deprecated, use pwm_put() instead.
+ */
+void pwm_free(struct pwm_device *pwm)
+{
+	pwm_put(pwm);
+}
+EXPORT_SYMBOL_GPL(pwm_free);
+
+/**
+ * pwm_config() - change a PWM device configuration
+ * @pwm: PWM device
+ * @duty_ns: "on" time (in nanoseconds)
+ * @period_ns: duration (in nanoseconds) of one cycle
+ */
+int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
+{
+	int err;
+
+	if (!pwm || duty_ns < 0 || period_ns <= 0 || duty_ns > period_ns)
+		return -EINVAL;
+
+	err = pwm->chip->ops->config(pwm->chip, pwm, duty_ns, period_ns);
+	if (err)
+		return err;
+
+	pwm->duty_cycle = duty_ns;
+	pwm->period = period_ns;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(pwm_config);
+
+/**
+ * pwm_set_polarity() - configure the polarity of a PWM signal
+ * @pwm: PWM device
+ * @polarity: new polarity of the PWM signal
+ *
+ * Note that the polarity cannot be configured while the PWM device is enabled
+ */
+int pwm_set_polarity(struct pwm_device *pwm, enum pwm_polarity polarity)
+{
+	int err;
+
+	if (!pwm || !pwm->chip->ops)
+		return -EINVAL;
+
+	if (!pwm->chip->ops->set_polarity)
+		return -ENOSYS;
+
+	if (test_bit(PWMF_ENABLED, &pwm->flags))
+		return -EBUSY;
+
+	err = pwm->chip->ops->set_polarity(pwm->chip, pwm, polarity);
+	if (err)
+		return err;
+
+	pwm->polarity = polarity;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(pwm_set_polarity);
+
+/**
+ * pwm_enable() - start a PWM output toggling
+ * @pwm: PWM device
+ */
+int pwm_enable(struct pwm_device *pwm)
+{
+	if (pwm && !test_and_set_bit(PWMF_ENABLED, &pwm->flags))
+		return pwm->chip->ops->enable(pwm->chip, pwm);
+
+	return pwm ? 0 : -EINVAL;
+}
+EXPORT_SYMBOL_GPL(pwm_enable);
+
+/**
+ * pwm_disable() - stop a PWM output toggling
+ * @pwm: PWM device
+ */
+void pwm_disable(struct pwm_device *pwm)
+{
+	if (pwm && test_and_clear_bit(PWMF_ENABLED, &pwm->flags))
+		pwm->chip->ops->disable(pwm->chip, pwm);
+}
+EXPORT_SYMBOL_GPL(pwm_disable);
+
+static struct pwm_chip *of_node_to_pwmchip(struct device_node *np)
+{
+	struct pwm_chip *chip;
+
+	mutex_lock(&pwm_lock);
+
+	list_for_each_entry(chip, &pwm_chips, list)
+		if (chip->dev && chip->dev->of_node == np) {
+			mutex_unlock(&pwm_lock);
+			return chip;
+		}
+
+	mutex_unlock(&pwm_lock);
+
+	return ERR_PTR(-EPROBE_DEFER);
+}
+
+/**
+ * of_pwm_get() - request a PWM via the PWM framework
+ * @np: device node to get the PWM from
+ * @con_id: consumer name
+ *
+ * Returns the PWM device parsed from the phandle and index specified in the
+ * "pwms" property of a device tree node or a negative error-code on failure.
+ * Values parsed from the device tree are stored in the returned PWM device
+ * object.
+ *
+ * If con_id is NULL, the first PWM device listed in the "pwms" property will
+ * be requested. Otherwise the "pwm-names" property is used to do a reverse
+ * lookup of the PWM index. This also means that the "pwm-names" property
+ * becomes mandatory for devices that look up the PWM device via the con_id
+ * parameter.
+ */
+struct pwm_device *of_pwm_get(struct device_node *np, const char *con_id)
+{
+	struct pwm_device *pwm = NULL;
+	struct of_phandle_args args;
+	struct pwm_chip *pc;
+	int index = 0;
+	int err;
+
+	if (con_id) {
+		index = of_property_match_string(np, "pwm-names", con_id);
+		if (index < 0)
+			return ERR_PTR(index);
+	}
+
+	err = of_parse_phandle_with_args(np, "pwms", "#pwm-cells", index,
+					 &args);
+	if (err) {
+		pr_debug("%s(): can't parse \"pwms\" property\n", __func__);
+		return ERR_PTR(err);
+	}
+
+	pc = of_node_to_pwmchip(args.np);
+	if (IS_ERR(pc)) {
+		pr_debug("%s(): PWM chip not found\n", __func__);
+		pwm = ERR_CAST(pc);
+		goto put;
+	}
+
+	if (args.args_count != pc->of_pwm_n_cells) {
+		pr_debug("%s: wrong #pwm-cells for %s\n", np->full_name,
+			 args.np->full_name);
+		pwm = ERR_PTR(-EINVAL);
+		goto put;
+	}
+
+	pwm = pc->of_xlate(pc, &args);
+	if (IS_ERR(pwm))
+		goto put;
+
+	/*
+	 * If a consumer name was not given, try to look it up from the
+	 * "pwm-names" property if it exists. Otherwise use the name of
+	 * the user device node.
+	 */
+	if (!con_id) {
+		err = of_property_read_string_index(np, "pwm-names", index,
+						    &con_id);
+		if (err < 0)
+			con_id = np->name;
+	}
+
+	pwm->label = con_id;
+
+put:
+	of_node_put(args.np);
+
+	return pwm;
+}
+EXPORT_SYMBOL_GPL(of_pwm_get);
+
+/**
+ * pwm_add_table() - register PWM device consumers
+ * @table: array of consumers to register
+ * @num: number of consumers in table
+ */
+void pwm_add_table(struct pwm_lookup *table, size_t num)
+{
+	mutex_lock(&pwm_lookup_lock);
+
+	while (num--) {
+		list_add_tail(&table->list, &pwm_lookup_list);
+		table++;
+	}
+
+	mutex_unlock(&pwm_lookup_lock);
+}
+
+/**
+ * pwm_get() - look up and request a PWM device
+ * @dev: device for PWM consumer
+ * @con_id: consumer name
+ *
+ * Lookup is first attempted using DT. If the device was not instantiated from
+ * a device tree, a PWM chip and a relative index is looked up via a table
+ * supplied by board setup code (see pwm_add_table()).
+ *
+ * Once a PWM chip has been found the specified PWM device will be requested
+ * and is ready to be used.
+ */
+struct pwm_device *pwm_get(struct device *dev, const char *con_id)
+{
+	struct pwm_device *pwm = ERR_PTR(-EPROBE_DEFER);
+	const char *dev_id = dev ? dev_name(dev) : NULL;
+	struct pwm_chip *chip = NULL;
+	unsigned int best = 0;
+	struct pwm_lookup *p, *chosen = NULL;
+	unsigned int match;
+
+	/* look up via DT first */
+	if (IS_ENABLED(CONFIG_OF) && dev && dev->of_node)
+		return of_pwm_get(dev->of_node, con_id);
+
+	/*
+	 * We look up the provider in the static table typically provided by
+	 * board setup code. We first try to lookup the consumer device by
+	 * name. If the consumer device was passed in as NULL or if no match
+	 * was found, we try to find the consumer by directly looking it up
+	 * by name.
+	 *
+	 * If a match is found, the provider PWM chip is looked up by name
+	 * and a PWM device is requested using the PWM device per-chip index.
+	 *
+	 * The lookup algorithm was shamelessly taken from the clock
+	 * framework:
+	 *
+	 * We do slightly fuzzy matching here:
+	 *  An entry with a NULL ID is assumed to be a wildcard.
+	 *  If an entry has a device ID, it must match
+	 *  If an entry has a connection ID, it must match
+	 * Then we take the most specific entry - with the following order
+	 * of precedence: dev+con > dev only > con only.
+	 */
+	mutex_lock(&pwm_lookup_lock);
+
+	list_for_each_entry(p, &pwm_lookup_list, list) {
+		match = 0;
+
+		if (p->dev_id) {
+			if (!dev_id || strcmp(p->dev_id, dev_id))
+				continue;
+
+			match += 2;
+		}
+
+		if (p->con_id) {
+			if (!con_id || strcmp(p->con_id, con_id))
+				continue;
+
+			match += 1;
+		}
+
+		if (match > best) {
+			chosen = p;
+
+			if (match != 3)
+				best = match;
+			else
+				break;
+		}
+	}
+
+	if (!chosen)
+		goto out;
+
+	chip = pwmchip_find_by_name(chosen->provider);
+	if (!chip)
+		goto out;
+
+	pwm = pwm_request_from_chip(chip, chosen->index, con_id ?: dev_id);
+	if (IS_ERR(pwm))
+		goto out;
+
+	pwm_set_period(pwm, chosen->period);
+	pwm_set_polarity(pwm, chosen->polarity);
+
+out:
+	mutex_unlock(&pwm_lookup_lock);
+	return pwm;
+}
+EXPORT_SYMBOL_GPL(pwm_get);
+
+/**
+ * pwm_put() - release a PWM device
+ * @pwm: PWM device
+ */
+void pwm_put(struct pwm_device *pwm)
+{
+	if (!pwm)
+		return;
+
+	mutex_lock(&pwm_lock);
+
+	if (!test_and_clear_bit(PWMF_REQUESTED, &pwm->flags)) {
+		pr_warn("PWM device already freed\n");
+		goto out;
+	}
+
+	if (pwm->chip->ops->free)
+		pwm->chip->ops->free(pwm->chip, pwm);
+
+	pwm->label = NULL;
+
+	module_put(pwm->chip->ops->owner);
+out:
+	mutex_unlock(&pwm_lock);
+}
+EXPORT_SYMBOL_GPL(pwm_put);
+
+static void devm_pwm_release(struct device *dev, void *res)
+{
+	pwm_put(*(struct pwm_device **)res);
+}
+
+/**
+ * devm_pwm_get() - resource managed pwm_get()
+ * @dev: device for PWM consumer
+ * @con_id: consumer name
+ *
+ * This function performs like pwm_get() but the acquired PWM device will
+ * automatically be released on driver detach.
+ */
+struct pwm_device *devm_pwm_get(struct device *dev, const char *con_id)
+{
+	struct pwm_device **ptr, *pwm;
+
+	ptr = devres_alloc(devm_pwm_release, sizeof(*ptr), GFP_KERNEL);
+	if (!ptr)
+		return ERR_PTR(-ENOMEM);
+
+	pwm = pwm_get(dev, con_id);
+	if (!IS_ERR(pwm)) {
+		*ptr = pwm;
+		devres_add(dev, ptr);
+	} else {
+		devres_free(ptr);
+	}
+
+	return pwm;
+}
+EXPORT_SYMBOL_GPL(devm_pwm_get);
+
+/**
+ * devm_of_pwm_get() - resource managed of_pwm_get()
+ * @dev: device for PWM consumer
+ * @np: device node to get the PWM from
+ * @con_id: consumer name
+ *
+ * This function performs like of_pwm_get() but the acquired PWM device will
+ * automatically be released on driver detach.
+ */
+struct pwm_device *devm_of_pwm_get(struct device *dev, struct device_node *np,
+				   const char *con_id)
+{
+	struct pwm_device **ptr, *pwm;
+
+	ptr = devres_alloc(devm_pwm_release, sizeof(*ptr), GFP_KERNEL);
+	if (!ptr)
+		return ERR_PTR(-ENOMEM);
+
+	pwm = of_pwm_get(np, con_id);
+	if (!IS_ERR(pwm)) {
+		*ptr = pwm;
+		devres_add(dev, ptr);
+	} else {
+		devres_free(ptr);
+	}
+
+	return pwm;
+}
+EXPORT_SYMBOL_GPL(devm_of_pwm_get);
+
+static int devm_pwm_match(struct device *dev, void *res, void *data)
+{
+	struct pwm_device **p = res;
+
+	if (WARN_ON(!p || !*p))
+		return 0;
+
+	return *p == data;
+}
+
+/**
+ * devm_pwm_put() - resource managed pwm_put()
+ * @dev: device for PWM consumer
+ * @pwm: PWM device
+ *
+ * Release a PWM previously allocated using devm_pwm_get(). Calling this
+ * function is usually not needed because devm-allocated resources are
+ * automatically released on driver detach.
+ */
+void devm_pwm_put(struct device *dev, struct pwm_device *pwm)
+{
+	WARN_ON(devres_release(dev, devm_pwm_release, devm_pwm_match, pwm));
+}
+EXPORT_SYMBOL_GPL(devm_pwm_put);
+
+/**
+  * pwm_can_sleep() - report whether PWM access will sleep
+  * @pwm: PWM device
+  *
+  * It returns true if accessing the PWM can sleep, false otherwise.
+  */
+bool pwm_can_sleep(struct pwm_device *pwm)
+{
+	return pwm->chip->can_sleep;
+}
+EXPORT_SYMBOL_GPL(pwm_can_sleep);
+
+#ifdef CONFIG_DEBUG_FS
+static void pwm_dbg_show(struct pwm_chip *chip, struct seq_file *s)
+{
+	unsigned int i;
+
+	for (i = 0; i < chip->npwm; i++) {
+		struct pwm_device *pwm = &chip->pwms[i];
+
+		seq_printf(s, " pwm-%-3d (%-20.20s):", i, pwm->label);
+
+		if (test_bit(PWMF_REQUESTED, &pwm->flags))
+			seq_puts(s, " requested");
+
+		if (test_bit(PWMF_ENABLED, &pwm->flags))
+			seq_puts(s, " enabled");
+
+		seq_puts(s, "\n");
+	}
+}
+
+static void *pwm_seq_start(struct seq_file *s, loff_t *pos)
+{
+	mutex_lock(&pwm_lock);
+	s->private = "";
+
+	return seq_list_start(&pwm_chips, *pos);
+}
+
+static void *pwm_seq_next(struct seq_file *s, void *v, loff_t *pos)
+{
+	s->private = "\n";
+
+	return seq_list_next(v, &pwm_chips, pos);
+}
+
+static void pwm_seq_stop(struct seq_file *s, void *v)
+{
+	mutex_unlock(&pwm_lock);
+}
+
+static int pwm_seq_show(struct seq_file *s, void *v)
+{
+	struct pwm_chip *chip = list_entry(v, struct pwm_chip, list);
+
+	seq_printf(s, "%s%s/%s, %d PWM device%s\n", (char *)s->private,
+		   chip->dev->bus ? chip->dev->bus->name : "no-bus",
+		   dev_name(chip->dev), chip->npwm,
+		   (chip->npwm != 1) ? "s" : "");
+
+	if (chip->ops->dbg_show)
+		chip->ops->dbg_show(chip, s);
+	else
+		pwm_dbg_show(chip, s);
+
+	return 0;
+}
+
+static const struct seq_operations pwm_seq_ops = {
+	.start = pwm_seq_start,
+	.next = pwm_seq_next,
+	.stop = pwm_seq_stop,
+	.show = pwm_seq_show,
+};
+
+static int pwm_seq_open(struct inode *inode, struct file *file)
+{
+	return seq_open(file, &pwm_seq_ops);
+}
+
+static const struct file_operations pwm_debugfs_ops = {
+	.owner = THIS_MODULE,
+	.open = pwm_seq_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = seq_release,
+};
+
+static int __init pwm_debugfs_init(void)
+{
+	debugfs_create_file("pwm", S_IFREG | S_IRUGO, NULL, NULL,
+			    &pwm_debugfs_ops);
+
+	return 0;
+}
+
+subsys_initcall(pwm_debugfs_init);
+#endif /* CONFIG_DEBUG_FS */
diff --git a/kernel/drivers/pwm/pwm-ab8500.c b/kernel/drivers/pwm/pwm-ab8500.c
new file mode 100644
index 000000000..f39399273
--- /dev/null
+++ b/kernel/drivers/pwm/pwm-ab8500.c
@@ -0,0 +1,143 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Arun R Murthy <arun.murthy@stericsson.com>
+ * License terms: GNU General Public License (GPL) version 2
+ */
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/pwm.h>
+#include <linux/mfd/abx500.h>
+#include <linux/mfd/abx500/ab8500.h>
+#include <linux/module.h>
+
+/*
+ * PWM Out generators
+ * Bank: 0x10
+ */
+#define AB8500_PWM_OUT_CTRL1_REG	0x60
+#define AB8500_PWM_OUT_CTRL2_REG	0x61
+#define AB8500_PWM_OUT_CTRL7_REG	0x66
+
+struct ab8500_pwm_chip {
+	struct pwm_chip chip;
+};
+
+static int ab8500_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+			     int duty_ns, int period_ns)
+{
+	int ret = 0;
+	unsigned int higher_val, lower_val;
+	u8 reg;
+
+	/*
+	 * get the first 8 bits that are be written to
+	 * AB8500_PWM_OUT_CTRL1_REG[0:7]
+	 */
+	lower_val = duty_ns & 0x00FF;
+	/*
+	 * get bits [9:10] that are to be written to
+	 * AB8500_PWM_OUT_CTRL2_REG[0:1]
+	 */
+	higher_val = ((duty_ns & 0x0300) >> 8);
+
+	reg = AB8500_PWM_OUT_CTRL1_REG + ((chip->base - 1) * 2);
+
+	ret = abx500_set_register_interruptible(chip->dev, AB8500_MISC,
+			reg, (u8)lower_val);
+	if (ret < 0)
+		return ret;
+	ret = abx500_set_register_interruptible(chip->dev, AB8500_MISC,
+			(reg + 1), (u8)higher_val);
+
+	return ret;
+}
+
+static int ab8500_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	int ret;
+
+	ret = abx500_mask_and_set_register_interruptible(chip->dev,
+				AB8500_MISC, AB8500_PWM_OUT_CTRL7_REG,
+				1 << (chip->base - 1), 1 << (chip->base - 1));
+	if (ret < 0)
+		dev_err(chip->dev, "%s: Failed to enable PWM, Error %d\n",
+							pwm->label, ret);
+	return ret;
+}
+
+static void ab8500_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	int ret;
+
+	ret = abx500_mask_and_set_register_interruptible(chip->dev,
+				AB8500_MISC, AB8500_PWM_OUT_CTRL7_REG,
+				1 << (chip->base - 1), 0);
+	if (ret < 0)
+		dev_err(chip->dev, "%s: Failed to disable PWM, Error %d\n",
+							pwm->label, ret);
+}
+
+static const struct pwm_ops ab8500_pwm_ops = {
+	.config = ab8500_pwm_config,
+	.enable = ab8500_pwm_enable,
+	.disable = ab8500_pwm_disable,
+	.owner = THIS_MODULE,
+};
+
+static int ab8500_pwm_probe(struct platform_device *pdev)
+{
+	struct ab8500_pwm_chip *ab8500;
+	int err;
+
+	/*
+	 * Nothing to be done in probe, this is required to get the
+	 * device which is required for ab8500 read and write
+	 */
+	ab8500 = devm_kzalloc(&pdev->dev, sizeof(*ab8500), GFP_KERNEL);
+	if (ab8500 == NULL)
+		return -ENOMEM;
+
+	ab8500->chip.dev = &pdev->dev;
+	ab8500->chip.ops = &ab8500_pwm_ops;
+	ab8500->chip.base = pdev->id;
+	ab8500->chip.npwm = 1;
+
+	err = pwmchip_add(&ab8500->chip);
+	if (err < 0)
+		return err;
+
+	dev_dbg(&pdev->dev, "pwm probe successful\n");
+	platform_set_drvdata(pdev, ab8500);
+
+	return 0;
+}
+
+static int ab8500_pwm_remove(struct platform_device *pdev)
+{
+	struct ab8500_pwm_chip *ab8500 = platform_get_drvdata(pdev);
+	int err;
+
+	err = pwmchip_remove(&ab8500->chip);
+	if (err < 0)
+		return err;
+
+	dev_dbg(&pdev->dev, "pwm driver removed\n");
+
+	return 0;
+}
+
+static struct platform_driver ab8500_pwm_driver = {
+	.driver = {
+		.name = "ab8500-pwm",
+	},
+	.probe = ab8500_pwm_probe,
+	.remove = ab8500_pwm_remove,
+};
+module_platform_driver(ab8500_pwm_driver);
+
+MODULE_AUTHOR("Arun MURTHY <arun.murthy@stericsson.com>");
+MODULE_DESCRIPTION("AB8500 Pulse Width Modulation Driver");
+MODULE_ALIAS("platform:ab8500-pwm");
+MODULE_LICENSE("GPL v2");
diff --git a/kernel/drivers/pwm/pwm-atmel-hlcdc.c b/kernel/drivers/pwm/pwm-atmel-hlcdc.c
new file mode 100644
index 000000000..fa5feaba2
--- /dev/null
+++ b/kernel/drivers/pwm/pwm-atmel-hlcdc.c
@@ -0,0 +1,309 @@
+/*
+ * Copyright (C) 2014 Free Electrons
+ * Copyright (C) 2014 Atmel
+ *
+ * Author: Boris BREZILLON <boris.brezillon@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/mfd/atmel-hlcdc.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/regmap.h>
+
+#define ATMEL_HLCDC_PWMCVAL_MASK	GENMASK(15, 8)
+#define ATMEL_HLCDC_PWMCVAL(x)		(((x) << 8) & ATMEL_HLCDC_PWMCVAL_MASK)
+#define ATMEL_HLCDC_PWMPOL		BIT(4)
+#define ATMEL_HLCDC_PWMPS_MASK		GENMASK(2, 0)
+#define ATMEL_HLCDC_PWMPS_MAX		0x6
+#define ATMEL_HLCDC_PWMPS(x)		((x) & ATMEL_HLCDC_PWMPS_MASK)
+
+struct atmel_hlcdc_pwm_errata {
+	bool slow_clk_erratum;
+	bool div1_clk_erratum;
+};
+
+struct atmel_hlcdc_pwm {
+	struct pwm_chip chip;
+	struct atmel_hlcdc *hlcdc;
+	struct clk *cur_clk;
+	const struct atmel_hlcdc_pwm_errata *errata;
+};
+
+static inline struct atmel_hlcdc_pwm *to_atmel_hlcdc_pwm(struct pwm_chip *chip)
+{
+	return container_of(chip, struct atmel_hlcdc_pwm, chip);
+}
+
+static int atmel_hlcdc_pwm_config(struct pwm_chip *c,
+				  struct pwm_device *pwm,
+				  int duty_ns, int period_ns)
+{
+	struct atmel_hlcdc_pwm *chip = to_atmel_hlcdc_pwm(c);
+	struct atmel_hlcdc *hlcdc = chip->hlcdc;
+	struct clk *new_clk = hlcdc->slow_clk;
+	u64 pwmcval = duty_ns * 256;
+	unsigned long clk_freq;
+	u64 clk_period_ns;
+	u32 pwmcfg;
+	int pres;
+
+	if (!chip->errata || !chip->errata->slow_clk_erratum) {
+		clk_freq = clk_get_rate(new_clk);
+		if (!clk_freq)
+			return -EINVAL;
+
+		clk_period_ns = (u64)NSEC_PER_SEC * 256;
+		do_div(clk_period_ns, clk_freq);
+	}
+
+	/* Errata: cannot use slow clk on some IP revisions */
+	if ((chip->errata && chip->errata->slow_clk_erratum) ||
+	    clk_period_ns > period_ns) {
+		new_clk = hlcdc->sys_clk;
+		clk_freq = clk_get_rate(new_clk);
+		if (!clk_freq)
+			return -EINVAL;
+
+		clk_period_ns = (u64)NSEC_PER_SEC * 256;
+		do_div(clk_period_ns, clk_freq);
+	}
+
+	for (pres = 0; pres <= ATMEL_HLCDC_PWMPS_MAX; pres++) {
+		/* Errata: cannot divide by 1 on some IP revisions */
+		if (!pres && chip->errata && chip->errata->div1_clk_erratum)
+			continue;
+
+		if ((clk_period_ns << pres) >= period_ns)
+			break;
+	}
+
+	if (pres > ATMEL_HLCDC_PWMPS_MAX)
+		return -EINVAL;
+
+	pwmcfg = ATMEL_HLCDC_PWMPS(pres);
+
+	if (new_clk != chip->cur_clk) {
+		u32 gencfg = 0;
+		int ret;
+
+		ret = clk_prepare_enable(new_clk);
+		if (ret)
+			return ret;
+
+		clk_disable_unprepare(chip->cur_clk);
+		chip->cur_clk = new_clk;
+
+		if (new_clk == hlcdc->sys_clk)
+			gencfg = ATMEL_HLCDC_CLKPWMSEL;
+
+		ret = regmap_update_bits(hlcdc->regmap, ATMEL_HLCDC_CFG(0),
+					 ATMEL_HLCDC_CLKPWMSEL, gencfg);
+		if (ret)
+			return ret;
+	}
+
+	do_div(pwmcval, period_ns);
+
+	/*
+	 * The PWM duty cycle is configurable from 0/256 to 255/256 of the
+	 * period cycle. Hence we can't set a duty cycle occupying the
+	 * whole period cycle if we're asked to.
+	 * Set it to 255 if pwmcval is greater than 256.
+	 */
+	if (pwmcval > 255)
+		pwmcval = 255;
+
+	pwmcfg |= ATMEL_HLCDC_PWMCVAL(pwmcval);
+
+	return regmap_update_bits(hlcdc->regmap, ATMEL_HLCDC_CFG(6),
+				  ATMEL_HLCDC_PWMCVAL_MASK |
+				  ATMEL_HLCDC_PWMPS_MASK,
+				  pwmcfg);
+}
+
+static int atmel_hlcdc_pwm_set_polarity(struct pwm_chip *c,
+					struct pwm_device *pwm,
+					enum pwm_polarity polarity)
+{
+	struct atmel_hlcdc_pwm *chip = to_atmel_hlcdc_pwm(c);
+	struct atmel_hlcdc *hlcdc = chip->hlcdc;
+	u32 cfg = 0;
+
+	if (polarity == PWM_POLARITY_NORMAL)
+		cfg = ATMEL_HLCDC_PWMPOL;
+
+	return regmap_update_bits(hlcdc->regmap, ATMEL_HLCDC_CFG(6),
+				  ATMEL_HLCDC_PWMPOL, cfg);
+}
+
+static int atmel_hlcdc_pwm_enable(struct pwm_chip *c, struct pwm_device *pwm)
+{
+	struct atmel_hlcdc_pwm *chip = to_atmel_hlcdc_pwm(c);
+	struct atmel_hlcdc *hlcdc = chip->hlcdc;
+	u32 status;
+	int ret;
+
+	ret = regmap_write(hlcdc->regmap, ATMEL_HLCDC_EN, ATMEL_HLCDC_PWM);
+	if (ret)
+		return ret;
+
+	while (true) {
+		ret = regmap_read(hlcdc->regmap, ATMEL_HLCDC_SR, &status);
+		if (ret)
+			return ret;
+
+		if ((status & ATMEL_HLCDC_PWM) != 0)
+			break;
+
+		usleep_range(1, 10);
+	}
+
+	return 0;
+}
+
+static void atmel_hlcdc_pwm_disable(struct pwm_chip *c,
+				    struct pwm_device *pwm)
+{
+	struct atmel_hlcdc_pwm *chip = to_atmel_hlcdc_pwm(c);
+	struct atmel_hlcdc *hlcdc = chip->hlcdc;
+	u32 status;
+	int ret;
+
+	ret = regmap_write(hlcdc->regmap, ATMEL_HLCDC_DIS, ATMEL_HLCDC_PWM);
+	if (ret)
+		return;
+
+	while (true) {
+		ret = regmap_read(hlcdc->regmap, ATMEL_HLCDC_SR, &status);
+		if (ret)
+			return;
+
+		if ((status & ATMEL_HLCDC_PWM) == 0)
+			break;
+
+		usleep_range(1, 10);
+	}
+}
+
+static const struct pwm_ops atmel_hlcdc_pwm_ops = {
+	.config = atmel_hlcdc_pwm_config,
+	.set_polarity = atmel_hlcdc_pwm_set_polarity,
+	.enable = atmel_hlcdc_pwm_enable,
+	.disable = atmel_hlcdc_pwm_disable,
+	.owner = THIS_MODULE,
+};
+
+static const struct atmel_hlcdc_pwm_errata atmel_hlcdc_pwm_at91sam9x5_errata = {
+	.slow_clk_erratum = true,
+};
+
+static const struct atmel_hlcdc_pwm_errata atmel_hlcdc_pwm_sama5d3_errata = {
+	.div1_clk_erratum = true,
+};
+
+static const struct of_device_id atmel_hlcdc_dt_ids[] = {
+	{
+		.compatible = "atmel,at91sam9x5-hlcdc",
+		.data = &atmel_hlcdc_pwm_at91sam9x5_errata,
+	},
+	{
+		.compatible = "atmel,sama5d3-hlcdc",
+		.data = &atmel_hlcdc_pwm_sama5d3_errata,
+	},
+	{
+		.compatible = "atmel,sama5d4-hlcdc",
+		.data = &atmel_hlcdc_pwm_sama5d3_errata,
+	},
+	{ /* sentinel */ },
+};
+
+static int atmel_hlcdc_pwm_probe(struct platform_device *pdev)
+{
+	const struct of_device_id *match;
+	struct device *dev = &pdev->dev;
+	struct atmel_hlcdc_pwm *chip;
+	struct atmel_hlcdc *hlcdc;
+	int ret;
+
+	hlcdc = dev_get_drvdata(dev->parent);
+
+	chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	ret = clk_prepare_enable(hlcdc->periph_clk);
+	if (ret)
+		return ret;
+
+	match = of_match_node(atmel_hlcdc_dt_ids, dev->parent->of_node);
+	if (match)
+		chip->errata = match->data;
+
+	chip->hlcdc = hlcdc;
+	chip->chip.ops = &atmel_hlcdc_pwm_ops;
+	chip->chip.dev = dev;
+	chip->chip.base = -1;
+	chip->chip.npwm = 1;
+	chip->chip.of_xlate = of_pwm_xlate_with_flags;
+	chip->chip.of_pwm_n_cells = 3;
+	chip->chip.can_sleep = 1;
+
+	ret = pwmchip_add(&chip->chip);
+	if (ret) {
+		clk_disable_unprepare(hlcdc->periph_clk);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, chip);
+
+	return 0;
+}
+
+static int atmel_hlcdc_pwm_remove(struct platform_device *pdev)
+{
+	struct atmel_hlcdc_pwm *chip = platform_get_drvdata(pdev);
+	int ret;
+
+	ret = pwmchip_remove(&chip->chip);
+	if (ret)
+		return ret;
+
+	clk_disable_unprepare(chip->hlcdc->periph_clk);
+
+	return 0;
+}
+
+static const struct of_device_id atmel_hlcdc_pwm_dt_ids[] = {
+	{ .compatible = "atmel,hlcdc-pwm" },
+	{ /* sentinel */ },
+};
+
+static struct platform_driver atmel_hlcdc_pwm_driver = {
+	.driver = {
+		.name = "atmel-hlcdc-pwm",
+		.of_match_table = atmel_hlcdc_pwm_dt_ids,
+	},
+	.probe = atmel_hlcdc_pwm_probe,
+	.remove = atmel_hlcdc_pwm_remove,
+};
+module_platform_driver(atmel_hlcdc_pwm_driver);
+
+MODULE_ALIAS("platform:atmel-hlcdc-pwm");
+MODULE_AUTHOR("Boris Brezillon <boris.brezillon@free-electrons.com>");
+MODULE_DESCRIPTION("Atmel HLCDC PWM driver");
+MODULE_LICENSE("GPL v2");
diff --git a/kernel/drivers/pwm/pwm-atmel-tcb.c b/kernel/drivers/pwm/pwm-atmel-tcb.c
new file mode 100644
index 000000000..d14e0677c
--- /dev/null
+++ b/kernel/drivers/pwm/pwm-atmel-tcb.c
@@ -0,0 +1,448 @@
+/*
+ * Copyright (C) Overkiz SAS 2012
+ *
+ * Author: Boris BREZILLON <b.brezillon@overkiz.com>
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/atmel_tc.h>
+#include <linux/pwm.h>
+#include <linux/of_device.h>
+#include <linux/slab.h>
+
+#define NPWM	6
+
+#define ATMEL_TC_ACMR_MASK	(ATMEL_TC_ACPA | ATMEL_TC_ACPC |	\
+				 ATMEL_TC_AEEVT | ATMEL_TC_ASWTRG)
+
+#define ATMEL_TC_BCMR_MASK	(ATMEL_TC_BCPB | ATMEL_TC_BCPC |	\
+				 ATMEL_TC_BEEVT | ATMEL_TC_BSWTRG)
+
+struct atmel_tcb_pwm_device {
+	enum pwm_polarity polarity;	/* PWM polarity */
+	unsigned div;			/* PWM clock divider */
+	unsigned duty;			/* PWM duty expressed in clk cycles */
+	unsigned period;		/* PWM period expressed in clk cycles */
+};
+
+struct atmel_tcb_pwm_chip {
+	struct pwm_chip chip;
+	spinlock_t lock;
+	struct atmel_tc *tc;
+	struct atmel_tcb_pwm_device *pwms[NPWM];
+};
+
+static inline struct atmel_tcb_pwm_chip *to_tcb_chip(struct pwm_chip *chip)
+{
+	return container_of(chip, struct atmel_tcb_pwm_chip, chip);
+}
+
+static int atmel_tcb_pwm_set_polarity(struct pwm_chip *chip,
+				      struct pwm_device *pwm,
+				      enum pwm_polarity polarity)
+{
+	struct atmel_tcb_pwm_device *tcbpwm = pwm_get_chip_data(pwm);
+
+	tcbpwm->polarity = polarity;
+
+	return 0;
+}
+
+static int atmel_tcb_pwm_request(struct pwm_chip *chip,
+				 struct pwm_device *pwm)
+{
+	struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
+	struct atmel_tcb_pwm_device *tcbpwm;
+	struct atmel_tc *tc = tcbpwmc->tc;
+	void __iomem *regs = tc->regs;
+	unsigned group = pwm->hwpwm / 2;
+	unsigned index = pwm->hwpwm % 2;
+	unsigned cmr;
+	int ret;
+
+	tcbpwm = devm_kzalloc(chip->dev, sizeof(*tcbpwm), GFP_KERNEL);
+	if (!tcbpwm)
+		return -ENOMEM;
+
+	ret = clk_prepare_enable(tc->clk[group]);
+	if (ret) {
+		devm_kfree(chip->dev, tcbpwm);
+		return ret;
+	}
+
+	pwm_set_chip_data(pwm, tcbpwm);
+	tcbpwm->polarity = PWM_POLARITY_NORMAL;
+	tcbpwm->duty = 0;
+	tcbpwm->period = 0;
+	tcbpwm->div = 0;
+
+	spin_lock(&tcbpwmc->lock);
+	cmr = __raw_readl(regs + ATMEL_TC_REG(group, CMR));
+	/*
+	 * Get init config from Timer Counter registers if
+	 * Timer Counter is already configured as a PWM generator.
+	 */
+	if (cmr & ATMEL_TC_WAVE) {
+		if (index == 0)
+			tcbpwm->duty =
+				__raw_readl(regs + ATMEL_TC_REG(group, RA));
+		else
+			tcbpwm->duty =
+				__raw_readl(regs + ATMEL_TC_REG(group, RB));
+
+		tcbpwm->div = cmr & ATMEL_TC_TCCLKS;
+		tcbpwm->period = __raw_readl(regs + ATMEL_TC_REG(group, RC));
+		cmr &= (ATMEL_TC_TCCLKS | ATMEL_TC_ACMR_MASK |
+			ATMEL_TC_BCMR_MASK);
+	} else
+		cmr = 0;
+
+	cmr |= ATMEL_TC_WAVE | ATMEL_TC_WAVESEL_UP_AUTO | ATMEL_TC_EEVT_XC0;
+	__raw_writel(cmr, regs + ATMEL_TC_REG(group, CMR));
+	spin_unlock(&tcbpwmc->lock);
+
+	tcbpwmc->pwms[pwm->hwpwm] = tcbpwm;
+
+	return 0;
+}
+
+static void atmel_tcb_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
+	struct atmel_tcb_pwm_device *tcbpwm = pwm_get_chip_data(pwm);
+	struct atmel_tc *tc = tcbpwmc->tc;
+
+	clk_disable_unprepare(tc->clk[pwm->hwpwm / 2]);
+	tcbpwmc->pwms[pwm->hwpwm] = NULL;
+	devm_kfree(chip->dev, tcbpwm);
+}
+
+static void atmel_tcb_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
+	struct atmel_tcb_pwm_device *tcbpwm = pwm_get_chip_data(pwm);
+	struct atmel_tc *tc = tcbpwmc->tc;
+	void __iomem *regs = tc->regs;
+	unsigned group = pwm->hwpwm / 2;
+	unsigned index = pwm->hwpwm % 2;
+	unsigned cmr;
+	enum pwm_polarity polarity = tcbpwm->polarity;
+
+	/*
+	 * If duty is 0 the timer will be stopped and we have to
+	 * configure the output correctly on software trigger:
+	 *  - set output to high if PWM_POLARITY_INVERSED
+	 *  - set output to low if PWM_POLARITY_NORMAL
+	 *
+	 * This is why we're reverting polarity in this case.
+	 */
+	if (tcbpwm->duty == 0)
+		polarity = !polarity;
+
+	spin_lock(&tcbpwmc->lock);
+	cmr = __raw_readl(regs + ATMEL_TC_REG(group, CMR));
+
+	/* flush old setting and set the new one */
+	if (index == 0) {
+		cmr &= ~ATMEL_TC_ACMR_MASK;
+		if (polarity == PWM_POLARITY_INVERSED)
+			cmr |= ATMEL_TC_ASWTRG_CLEAR;
+		else
+			cmr |= ATMEL_TC_ASWTRG_SET;
+	} else {
+		cmr &= ~ATMEL_TC_BCMR_MASK;
+		if (polarity == PWM_POLARITY_INVERSED)
+			cmr |= ATMEL_TC_BSWTRG_CLEAR;
+		else
+			cmr |= ATMEL_TC_BSWTRG_SET;
+	}
+
+	__raw_writel(cmr, regs + ATMEL_TC_REG(group, CMR));
+
+	/*
+	 * Use software trigger to apply the new setting.
+	 * If both PWM devices in this group are disabled we stop the clock.
+	 */
+	if (!(cmr & (ATMEL_TC_ACPC | ATMEL_TC_BCPC)))
+		__raw_writel(ATMEL_TC_SWTRG | ATMEL_TC_CLKDIS,
+			     regs + ATMEL_TC_REG(group, CCR));
+	else
+		__raw_writel(ATMEL_TC_SWTRG, regs +
+			     ATMEL_TC_REG(group, CCR));
+
+	spin_unlock(&tcbpwmc->lock);
+}
+
+static int atmel_tcb_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
+	struct atmel_tcb_pwm_device *tcbpwm = pwm_get_chip_data(pwm);
+	struct atmel_tc *tc = tcbpwmc->tc;
+	void __iomem *regs = tc->regs;
+	unsigned group = pwm->hwpwm / 2;
+	unsigned index = pwm->hwpwm % 2;
+	u32 cmr;
+	enum pwm_polarity polarity = tcbpwm->polarity;
+
+	/*
+	 * If duty is 0 the timer will be stopped and we have to
+	 * configure the output correctly on software trigger:
+	 *  - set output to high if PWM_POLARITY_INVERSED
+	 *  - set output to low if PWM_POLARITY_NORMAL
+	 *
+	 * This is why we're reverting polarity in this case.
+	 */
+	if (tcbpwm->duty == 0)
+		polarity = !polarity;
+
+	spin_lock(&tcbpwmc->lock);
+	cmr = __raw_readl(regs + ATMEL_TC_REG(group, CMR));
+
+	/* flush old setting and set the new one */
+	cmr &= ~ATMEL_TC_TCCLKS;
+
+	if (index == 0) {
+		cmr &= ~ATMEL_TC_ACMR_MASK;
+
+		/* Set CMR flags according to given polarity */
+		if (polarity == PWM_POLARITY_INVERSED)
+			cmr |= ATMEL_TC_ASWTRG_CLEAR;
+		else
+			cmr |= ATMEL_TC_ASWTRG_SET;
+	} else {
+		cmr &= ~ATMEL_TC_BCMR_MASK;
+		if (polarity == PWM_POLARITY_INVERSED)
+			cmr |= ATMEL_TC_BSWTRG_CLEAR;
+		else
+			cmr |= ATMEL_TC_BSWTRG_SET;
+	}
+
+	/*
+	 * If duty is 0 or equal to period there's no need to register
+	 * a specific action on RA/RB and RC compare.
+	 * The output will be configured on software trigger and keep
+	 * this config till next config call.
+	 */
+	if (tcbpwm->duty != tcbpwm->period && tcbpwm->duty > 0) {
+		if (index == 0) {
+			if (polarity == PWM_POLARITY_INVERSED)
+				cmr |= ATMEL_TC_ACPA_SET | ATMEL_TC_ACPC_CLEAR;
+			else
+				cmr |= ATMEL_TC_ACPA_CLEAR | ATMEL_TC_ACPC_SET;
+		} else {
+			if (polarity == PWM_POLARITY_INVERSED)
+				cmr |= ATMEL_TC_BCPB_SET | ATMEL_TC_BCPC_CLEAR;
+			else
+				cmr |= ATMEL_TC_BCPB_CLEAR | ATMEL_TC_BCPC_SET;
+		}
+	}
+
+	cmr |= (tcbpwm->div & ATMEL_TC_TCCLKS);
+
+	__raw_writel(cmr, regs + ATMEL_TC_REG(group, CMR));
+
+	if (index == 0)
+		__raw_writel(tcbpwm->duty, regs + ATMEL_TC_REG(group, RA));
+	else
+		__raw_writel(tcbpwm->duty, regs + ATMEL_TC_REG(group, RB));
+
+	__raw_writel(tcbpwm->period, regs + ATMEL_TC_REG(group, RC));
+
+	/* Use software trigger to apply the new setting */
+	__raw_writel(ATMEL_TC_CLKEN | ATMEL_TC_SWTRG,
+		     regs + ATMEL_TC_REG(group, CCR));
+	spin_unlock(&tcbpwmc->lock);
+	return 0;
+}
+
+static int atmel_tcb_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+				int duty_ns, int period_ns)
+{
+	struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
+	struct atmel_tcb_pwm_device *tcbpwm = pwm_get_chip_data(pwm);
+	unsigned group = pwm->hwpwm / 2;
+	unsigned index = pwm->hwpwm % 2;
+	struct atmel_tcb_pwm_device *atcbpwm = NULL;
+	struct atmel_tc *tc = tcbpwmc->tc;
+	int i;
+	int slowclk = 0;
+	unsigned period;
+	unsigned duty;
+	unsigned rate = clk_get_rate(tc->clk[group]);
+	unsigned long long min;
+	unsigned long long max;
+
+	/*
+	 * Find best clk divisor:
+	 * the smallest divisor which can fulfill the period_ns requirements.
+	 */
+	for (i = 0; i < 5; ++i) {
+		if (atmel_tc_divisors[i] == 0) {
+			slowclk = i;
+			continue;
+		}
+		min = div_u64((u64)NSEC_PER_SEC * atmel_tc_divisors[i], rate);
+		max = min << tc->tcb_config->counter_width;
+		if (max >= period_ns)
+			break;
+	}
+
+	/*
+	 * If none of the divisor are small enough to represent period_ns
+	 * take slow clock (32KHz).
+	 */
+	if (i == 5) {
+		i = slowclk;
+		rate = 32768;
+		min = div_u64(NSEC_PER_SEC, rate);
+		max = min << tc->tcb_config->counter_width;
+
+		/* If period is too big return ERANGE error */
+		if (max < period_ns)
+			return -ERANGE;
+	}
+
+	duty = div_u64(duty_ns, min);
+	period = div_u64(period_ns, min);
+
+	if (index == 0)
+		atcbpwm = tcbpwmc->pwms[pwm->hwpwm + 1];
+	else
+		atcbpwm = tcbpwmc->pwms[pwm->hwpwm - 1];
+
+	/*
+	 * PWM devices provided by TCB driver are grouped by 2:
+	 * - group 0: PWM 0 & 1
+	 * - group 1: PWM 2 & 3
+	 * - group 2: PWM 4 & 5
+	 *
+	 * PWM devices in a given group must be configured with the
+	 * same period_ns.
+	 *
+	 * We're checking the period value of the second PWM device
+	 * in this group before applying the new config.
+	 */
+	if ((atcbpwm && atcbpwm->duty > 0 &&
+			atcbpwm->duty != atcbpwm->period) &&
+		(atcbpwm->div != i || atcbpwm->period != period)) {
+		dev_err(chip->dev,
+			"failed to configure period_ns: PWM group already configured with a different value\n");
+		return -EINVAL;
+	}
+
+	tcbpwm->period = period;
+	tcbpwm->div = i;
+	tcbpwm->duty = duty;
+
+	/* If the PWM is enabled, call enable to apply the new conf */
+	if (test_bit(PWMF_ENABLED, &pwm->flags))
+		atmel_tcb_pwm_enable(chip, pwm);
+
+	return 0;
+}
+
+static const struct pwm_ops atmel_tcb_pwm_ops = {
+	.request = atmel_tcb_pwm_request,
+	.free = atmel_tcb_pwm_free,
+	.config = atmel_tcb_pwm_config,
+	.set_polarity = atmel_tcb_pwm_set_polarity,
+	.enable = atmel_tcb_pwm_enable,
+	.disable = atmel_tcb_pwm_disable,
+	.owner = THIS_MODULE,
+};
+
+static int atmel_tcb_pwm_probe(struct platform_device *pdev)
+{
+	struct atmel_tcb_pwm_chip *tcbpwm;
+	struct device_node *np = pdev->dev.of_node;
+	struct atmel_tc *tc;
+	int err;
+	int tcblock;
+
+	err = of_property_read_u32(np, "tc-block", &tcblock);
+	if (err < 0) {
+		dev_err(&pdev->dev,
+			"failed to get Timer Counter Block number from device tree (error: %d)\n",
+			err);
+		return err;
+	}
+
+	tc = atmel_tc_alloc(tcblock);
+	if (tc == NULL) {
+		dev_err(&pdev->dev, "failed to allocate Timer Counter Block\n");
+		return -ENOMEM;
+	}
+
+	tcbpwm = devm_kzalloc(&pdev->dev, sizeof(*tcbpwm), GFP_KERNEL);
+	if (tcbpwm == NULL) {
+		atmel_tc_free(tc);
+		dev_err(&pdev->dev, "failed to allocate memory\n");
+		return -ENOMEM;
+	}
+
+	tcbpwm->chip.dev = &pdev->dev;
+	tcbpwm->chip.ops = &atmel_tcb_pwm_ops;
+	tcbpwm->chip.of_xlate = of_pwm_xlate_with_flags;
+	tcbpwm->chip.of_pwm_n_cells = 3;
+	tcbpwm->chip.base = -1;
+	tcbpwm->chip.npwm = NPWM;
+	tcbpwm->tc = tc;
+
+	spin_lock_init(&tcbpwm->lock);
+
+	err = pwmchip_add(&tcbpwm->chip);
+	if (err < 0) {
+		atmel_tc_free(tc);
+		return err;
+	}
+
+	platform_set_drvdata(pdev, tcbpwm);
+
+	return 0;
+}
+
+static int atmel_tcb_pwm_remove(struct platform_device *pdev)
+{
+	struct atmel_tcb_pwm_chip *tcbpwm = platform_get_drvdata(pdev);
+	int err;
+
+	err = pwmchip_remove(&tcbpwm->chip);
+	if (err < 0)
+		return err;
+
+	atmel_tc_free(tcbpwm->tc);
+
+	return 0;
+}
+
+static const struct of_device_id atmel_tcb_pwm_dt_ids[] = {
+	{ .compatible = "atmel,tcb-pwm", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, atmel_tcb_pwm_dt_ids);
+
+static struct platform_driver atmel_tcb_pwm_driver = {
+	.driver = {
+		.name = "atmel-tcb-pwm",
+		.of_match_table = atmel_tcb_pwm_dt_ids,
+	},
+	.probe = atmel_tcb_pwm_probe,
+	.remove = atmel_tcb_pwm_remove,
+};
+module_platform_driver(atmel_tcb_pwm_driver);
+
+MODULE_AUTHOR("Boris BREZILLON <b.brezillon@overkiz.com>");
+MODULE_DESCRIPTION("Atmel Timer Counter Pulse Width Modulation Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/kernel/drivers/pwm/pwm-atmel.c b/kernel/drivers/pwm/pwm-atmel.c
new file mode 100644
index 000000000..d3c22de9e
--- /dev/null
+++ b/kernel/drivers/pwm/pwm-atmel.c
@@ -0,0 +1,399 @@
+/*
+ * Driver for Atmel Pulse Width Modulation Controller
+ *
+ * Copyright (C) 2013 Atmel Corporation
+ *		 Bo Shen <voice.shen@atmel.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/slab.h>
+
+/* The following is global registers for PWM controller */
+#define PWM_ENA			0x04
+#define PWM_DIS			0x08
+#define PWM_SR			0x0C
+/* Bit field in SR */
+#define PWM_SR_ALL_CH_ON	0x0F
+
+/* The following register is PWM channel related registers */
+#define PWM_CH_REG_OFFSET	0x200
+#define PWM_CH_REG_SIZE		0x20
+
+#define PWM_CMR			0x0
+/* Bit field in CMR */
+#define PWM_CMR_CPOL		(1 << 9)
+#define PWM_CMR_UPD_CDTY	(1 << 10)
+#define PWM_CMR_CPRE_MSK	0xF
+
+/* The following registers for PWM v1 */
+#define PWMV1_CDTY		0x04
+#define PWMV1_CPRD		0x08
+#define PWMV1_CUPD		0x10
+
+/* The following registers for PWM v2 */
+#define PWMV2_CDTY		0x04
+#define PWMV2_CDTYUPD		0x08
+#define PWMV2_CPRD		0x0C
+#define PWMV2_CPRDUPD		0x10
+
+/*
+ * Max value for duty and period
+ *
+ * Although the duty and period register is 32 bit,
+ * however only the LSB 16 bits are significant.
+ */
+#define PWM_MAX_DTY		0xFFFF
+#define PWM_MAX_PRD		0xFFFF
+#define PRD_MAX_PRES		10
+
+struct atmel_pwm_chip {
+	struct pwm_chip chip;
+	struct clk *clk;
+	void __iomem *base;
+
+	void (*config)(struct pwm_chip *chip, struct pwm_device *pwm,
+		       unsigned long dty, unsigned long prd);
+};
+
+static inline struct atmel_pwm_chip *to_atmel_pwm_chip(struct pwm_chip *chip)
+{
+	return container_of(chip, struct atmel_pwm_chip, chip);
+}
+
+static inline u32 atmel_pwm_readl(struct atmel_pwm_chip *chip,
+				  unsigned long offset)
+{
+	return readl_relaxed(chip->base + offset);
+}
+
+static inline void atmel_pwm_writel(struct atmel_pwm_chip *chip,
+				    unsigned long offset, unsigned long val)
+{
+	writel_relaxed(val, chip->base + offset);
+}
+
+static inline u32 atmel_pwm_ch_readl(struct atmel_pwm_chip *chip,
+				     unsigned int ch, unsigned long offset)
+{
+	unsigned long base = PWM_CH_REG_OFFSET + ch * PWM_CH_REG_SIZE;
+
+	return readl_relaxed(chip->base + base + offset);
+}
+
+static inline void atmel_pwm_ch_writel(struct atmel_pwm_chip *chip,
+				       unsigned int ch, unsigned long offset,
+				       unsigned long val)
+{
+	unsigned long base = PWM_CH_REG_OFFSET + ch * PWM_CH_REG_SIZE;
+
+	writel_relaxed(val, chip->base + base + offset);
+}
+
+static int atmel_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+			    int duty_ns, int period_ns)
+{
+	struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip);
+	unsigned long prd, dty;
+	unsigned long long div;
+	unsigned int pres = 0;
+	u32 val;
+	int ret;
+
+	if (test_bit(PWMF_ENABLED, &pwm->flags) && (period_ns != pwm->period)) {
+		dev_err(chip->dev, "cannot change PWM period while enabled\n");
+		return -EBUSY;
+	}
+
+	/* Calculate the period cycles and prescale value */
+	div = (unsigned long long)clk_get_rate(atmel_pwm->clk) * period_ns;
+	do_div(div, NSEC_PER_SEC);
+
+	while (div > PWM_MAX_PRD) {
+		div >>= 1;
+		pres++;
+	}
+
+	if (pres > PRD_MAX_PRES) {
+		dev_err(chip->dev, "pres exceeds the maximum value\n");
+		return -EINVAL;
+	}
+
+	/* Calculate the duty cycles */
+	prd = div;
+	div *= duty_ns;
+	do_div(div, period_ns);
+	dty = prd - div;
+
+	ret = clk_enable(atmel_pwm->clk);
+	if (ret) {
+		dev_err(chip->dev, "failed to enable PWM clock\n");
+		return ret;
+	}
+
+	/* It is necessary to preserve CPOL, inside CMR */
+	val = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm, PWM_CMR);
+	val = (val & ~PWM_CMR_CPRE_MSK) | (pres & PWM_CMR_CPRE_MSK);
+	atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWM_CMR, val);
+	atmel_pwm->config(chip, pwm, dty, prd);
+
+	clk_disable(atmel_pwm->clk);
+	return ret;
+}
+
+static void atmel_pwm_config_v1(struct pwm_chip *chip, struct pwm_device *pwm,
+				unsigned long dty, unsigned long prd)
+{
+	struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip);
+	unsigned int val;
+
+	if (test_bit(PWMF_ENABLED, &pwm->flags)) {
+		/*
+		 * If the PWM channel is enabled, using the update register,
+		 * it needs to set bit 10 of CMR to 0
+		 */
+		atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWMV1_CUPD, dty);
+
+		val = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm, PWM_CMR);
+		val &= ~PWM_CMR_UPD_CDTY;
+		atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWM_CMR, val);
+	} else {
+		/*
+		 * If the PWM channel is disabled, write value to duty and
+		 * period registers directly.
+		 */
+		atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWMV1_CDTY, dty);
+		atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWMV1_CPRD, prd);
+	}
+}
+
+static void atmel_pwm_config_v2(struct pwm_chip *chip, struct pwm_device *pwm,
+				unsigned long dty, unsigned long prd)
+{
+	struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip);
+
+	if (test_bit(PWMF_ENABLED, &pwm->flags)) {
+		/*
+		 * If the PWM channel is enabled, using the duty update register
+		 * to update the value.
+		 */
+		atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWMV2_CDTYUPD, dty);
+	} else {
+		/*
+		 * If the PWM channel is disabled, write value to duty and
+		 * period registers directly.
+		 */
+		atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWMV2_CDTY, dty);
+		atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWMV2_CPRD, prd);
+	}
+}
+
+static int atmel_pwm_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm,
+				  enum pwm_polarity polarity)
+{
+	struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip);
+	u32 val;
+	int ret;
+
+	val = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm, PWM_CMR);
+
+	if (polarity == PWM_POLARITY_NORMAL)
+		val &= ~PWM_CMR_CPOL;
+	else
+		val |= PWM_CMR_CPOL;
+
+	ret = clk_enable(atmel_pwm->clk);
+	if (ret) {
+		dev_err(chip->dev, "failed to enable PWM clock\n");
+		return ret;
+	}
+
+	atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWM_CMR, val);
+
+	clk_disable(atmel_pwm->clk);
+
+	return 0;
+}
+
+static int atmel_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip);
+	int ret;
+
+	ret = clk_enable(atmel_pwm->clk);
+	if (ret) {
+		dev_err(chip->dev, "failed to enable PWM clock\n");
+		return ret;
+	}
+
+	atmel_pwm_writel(atmel_pwm, PWM_ENA, 1 << pwm->hwpwm);
+
+	return 0;
+}
+
+static void atmel_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip);
+
+	atmel_pwm_writel(atmel_pwm, PWM_DIS, 1 << pwm->hwpwm);
+
+	clk_disable(atmel_pwm->clk);
+}
+
+static const struct pwm_ops atmel_pwm_ops = {
+	.config = atmel_pwm_config,
+	.set_polarity = atmel_pwm_set_polarity,
+	.enable = atmel_pwm_enable,
+	.disable = atmel_pwm_disable,
+	.owner = THIS_MODULE,
+};
+
+struct atmel_pwm_data {
+	void (*config)(struct pwm_chip *chip, struct pwm_device *pwm,
+		       unsigned long dty, unsigned long prd);
+};
+
+static const struct atmel_pwm_data atmel_pwm_data_v1 = {
+	.config = atmel_pwm_config_v1,
+};
+
+static const struct atmel_pwm_data atmel_pwm_data_v2 = {
+	.config = atmel_pwm_config_v2,
+};
+
+static const struct platform_device_id atmel_pwm_devtypes[] = {
+	{
+		.name = "at91sam9rl-pwm",
+		.driver_data = (kernel_ulong_t)&atmel_pwm_data_v1,
+	}, {
+		.name = "sama5d3-pwm",
+		.driver_data = (kernel_ulong_t)&atmel_pwm_data_v2,
+	}, {
+		/* sentinel */
+	},
+};
+MODULE_DEVICE_TABLE(platform, atmel_pwm_devtypes);
+
+static const struct of_device_id atmel_pwm_dt_ids[] = {
+	{
+		.compatible = "atmel,at91sam9rl-pwm",
+		.data = &atmel_pwm_data_v1,
+	}, {
+		.compatible = "atmel,sama5d3-pwm",
+		.data = &atmel_pwm_data_v2,
+	}, {
+		/* sentinel */
+	},
+};
+MODULE_DEVICE_TABLE(of, atmel_pwm_dt_ids);
+
+static inline const struct atmel_pwm_data *
+atmel_pwm_get_driver_data(struct platform_device *pdev)
+{
+	if (pdev->dev.of_node) {
+		const struct of_device_id *match;
+
+		match = of_match_device(atmel_pwm_dt_ids, &pdev->dev);
+		if (!match)
+			return NULL;
+
+		return match->data;
+	} else {
+		const struct platform_device_id *id;
+
+		id = platform_get_device_id(pdev);
+
+		return (struct atmel_pwm_data *)id->driver_data;
+	}
+}
+
+static int atmel_pwm_probe(struct platform_device *pdev)
+{
+	const struct atmel_pwm_data *data;
+	struct atmel_pwm_chip *atmel_pwm;
+	struct resource *res;
+	int ret;
+
+	data = atmel_pwm_get_driver_data(pdev);
+	if (!data)
+		return -ENODEV;
+
+	atmel_pwm = devm_kzalloc(&pdev->dev, sizeof(*atmel_pwm), GFP_KERNEL);
+	if (!atmel_pwm)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	atmel_pwm->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(atmel_pwm->base))
+		return PTR_ERR(atmel_pwm->base);
+
+	atmel_pwm->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(atmel_pwm->clk))
+		return PTR_ERR(atmel_pwm->clk);
+
+	ret = clk_prepare(atmel_pwm->clk);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to prepare PWM clock\n");
+		return ret;
+	}
+
+	atmel_pwm->chip.dev = &pdev->dev;
+	atmel_pwm->chip.ops = &atmel_pwm_ops;
+
+	if (pdev->dev.of_node) {
+		atmel_pwm->chip.of_xlate = of_pwm_xlate_with_flags;
+		atmel_pwm->chip.of_pwm_n_cells = 3;
+	}
+
+	atmel_pwm->chip.base = -1;
+	atmel_pwm->chip.npwm = 4;
+	atmel_pwm->chip.can_sleep = true;
+	atmel_pwm->config = data->config;
+
+	ret = pwmchip_add(&atmel_pwm->chip);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to add PWM chip %d\n", ret);
+		goto unprepare_clk;
+	}
+
+	platform_set_drvdata(pdev, atmel_pwm);
+
+	return ret;
+
+unprepare_clk:
+	clk_unprepare(atmel_pwm->clk);
+	return ret;
+}
+
+static int atmel_pwm_remove(struct platform_device *pdev)
+{
+	struct atmel_pwm_chip *atmel_pwm = platform_get_drvdata(pdev);
+
+	clk_unprepare(atmel_pwm->clk);
+
+	return pwmchip_remove(&atmel_pwm->chip);
+}
+
+static struct platform_driver atmel_pwm_driver = {
+	.driver = {
+		.name = "atmel-pwm",
+		.of_match_table = of_match_ptr(atmel_pwm_dt_ids),
+	},
+	.id_table = atmel_pwm_devtypes,
+	.probe = atmel_pwm_probe,
+	.remove = atmel_pwm_remove,
+};
+module_platform_driver(atmel_pwm_driver);
+
+MODULE_ALIAS("platform:atmel-pwm");
+MODULE_AUTHOR("Bo Shen <voice.shen@atmel.com>");
+MODULE_DESCRIPTION("Atmel PWM driver");
+MODULE_LICENSE("GPL v2");
diff --git a/kernel/drivers/pwm/pwm-bcm-kona.c b/kernel/drivers/pwm/pwm-bcm-kona.c
new file mode 100644
index 000000000..02bc04889
--- /dev/null
+++ b/kernel/drivers/pwm/pwm-bcm-kona.c
@@ -0,0 +1,318 @@
+/*
+ * Copyright (C) 2014 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/math64.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+/*
+ * The Kona PWM has some unusual characteristics.  Here are the main points.
+ *
+ * 1) There is no disable bit and the hardware docs advise programming a zero
+ *    duty to achieve output equivalent to that of a normal disable operation.
+ *
+ * 2) Changes to prescale, duty, period, and polarity do not take effect until
+ *    a subsequent rising edge of the trigger bit.
+ *
+ * 3) If the smooth bit and trigger bit are both low, the output is a constant
+ *    high signal.  Otherwise, the earlier waveform continues to be output.
+ *
+ * 4) If the smooth bit is set on the rising edge of the trigger bit, output
+ *    will transition to the new settings on a period boundary (which could be
+ *    seconds away).  If the smooth bit is clear, new settings will be applied
+ *    as soon as possible (the hardware always has a 400ns delay).
+ *
+ * 5) When the external clock that feeds the PWM is disabled, output is pegged
+ *    high or low depending on its state at that exact instant.
+ */
+
+#define PWM_CONTROL_OFFSET			(0x00000000)
+#define PWM_CONTROL_SMOOTH_SHIFT(chan)		(24 + (chan))
+#define PWM_CONTROL_TYPE_SHIFT(chan)		(16 + (chan))
+#define PWM_CONTROL_POLARITY_SHIFT(chan)	(8 + (chan))
+#define PWM_CONTROL_TRIGGER_SHIFT(chan)		(chan)
+
+#define PRESCALE_OFFSET				(0x00000004)
+#define PRESCALE_SHIFT(chan)			((chan) << 2)
+#define PRESCALE_MASK(chan)			(0x7 << PRESCALE_SHIFT(chan))
+#define PRESCALE_MIN				(0x00000000)
+#define PRESCALE_MAX				(0x00000007)
+
+#define PERIOD_COUNT_OFFSET(chan)		(0x00000008 + ((chan) << 3))
+#define PERIOD_COUNT_MIN			(0x00000002)
+#define PERIOD_COUNT_MAX			(0x00ffffff)
+
+#define DUTY_CYCLE_HIGH_OFFSET(chan)		(0x0000000c + ((chan) << 3))
+#define DUTY_CYCLE_HIGH_MIN			(0x00000000)
+#define DUTY_CYCLE_HIGH_MAX			(0x00ffffff)
+
+struct kona_pwmc {
+	struct pwm_chip chip;
+	void __iomem *base;
+	struct clk *clk;
+};
+
+static inline struct kona_pwmc *to_kona_pwmc(struct pwm_chip *_chip)
+{
+	return container_of(_chip, struct kona_pwmc, chip);
+}
+
+static void kona_pwmc_apply_settings(struct kona_pwmc *kp, unsigned int chan)
+{
+	unsigned int value = readl(kp->base + PWM_CONTROL_OFFSET);
+
+	/* Clear trigger bit but set smooth bit to maintain old output */
+	value |= 1 << PWM_CONTROL_SMOOTH_SHIFT(chan);
+	value &= ~(1 << PWM_CONTROL_TRIGGER_SHIFT(chan));
+	writel(value, kp->base + PWM_CONTROL_OFFSET);
+
+	/* Set trigger bit and clear smooth bit to apply new settings */
+	value &= ~(1 << PWM_CONTROL_SMOOTH_SHIFT(chan));
+	value |= 1 << PWM_CONTROL_TRIGGER_SHIFT(chan);
+	writel(value, kp->base + PWM_CONTROL_OFFSET);
+}
+
+static int kona_pwmc_config(struct pwm_chip *chip, struct pwm_device *pwm,
+			    int duty_ns, int period_ns)
+{
+	struct kona_pwmc *kp = to_kona_pwmc(chip);
+	u64 val, div, rate;
+	unsigned long prescale = PRESCALE_MIN, pc, dc;
+	unsigned int value, chan = pwm->hwpwm;
+
+	/*
+	 * Find period count, duty count and prescale to suit duty_ns and
+	 * period_ns. This is done according to formulas described below:
+	 *
+	 * period_ns = 10^9 * (PRESCALE + 1) * PC / PWM_CLK_RATE
+	 * duty_ns = 10^9 * (PRESCALE + 1) * DC / PWM_CLK_RATE
+	 *
+	 * PC = (PWM_CLK_RATE * period_ns) / (10^9 * (PRESCALE + 1))
+	 * DC = (PWM_CLK_RATE * duty_ns) / (10^9 * (PRESCALE + 1))
+	 */
+
+	rate = clk_get_rate(kp->clk);
+
+	while (1) {
+		div = 1000000000;
+		div *= 1 + prescale;
+		val = rate * period_ns;
+		pc = div64_u64(val, div);
+		val = rate * duty_ns;
+		dc = div64_u64(val, div);
+
+		/* If duty_ns or period_ns are not achievable then return */
+		if (pc < PERIOD_COUNT_MIN || dc < DUTY_CYCLE_HIGH_MIN)
+			return -EINVAL;
+
+		/* If pc and dc are in bounds, the calculation is done */
+		if (pc <= PERIOD_COUNT_MAX && dc <= DUTY_CYCLE_HIGH_MAX)
+			break;
+
+		/* Otherwise, increase prescale and recalculate pc and dc */
+		if (++prescale > PRESCALE_MAX)
+			return -EINVAL;
+	}
+
+	/* If the PWM channel is enabled, write the settings to the HW */
+	if (test_bit(PWMF_ENABLED, &pwm->flags)) {
+		value = readl(kp->base + PRESCALE_OFFSET);
+		value &= ~PRESCALE_MASK(chan);
+		value |= prescale << PRESCALE_SHIFT(chan);
+		writel(value, kp->base + PRESCALE_OFFSET);
+
+		writel(pc, kp->base + PERIOD_COUNT_OFFSET(chan));
+
+		writel(dc, kp->base + DUTY_CYCLE_HIGH_OFFSET(chan));
+
+		kona_pwmc_apply_settings(kp, chan);
+	}
+
+	return 0;
+}
+
+static int kona_pwmc_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm,
+				  enum pwm_polarity polarity)
+{
+	struct kona_pwmc *kp = to_kona_pwmc(chip);
+	unsigned int chan = pwm->hwpwm;
+	unsigned int value;
+	int ret;
+
+	ret = clk_prepare_enable(kp->clk);
+	if (ret < 0) {
+		dev_err(chip->dev, "failed to enable clock: %d\n", ret);
+		return ret;
+	}
+
+	value = readl(kp->base + PWM_CONTROL_OFFSET);
+
+	if (polarity == PWM_POLARITY_NORMAL)
+		value |= 1 << PWM_CONTROL_POLARITY_SHIFT(chan);
+	else
+		value &= ~(1 << PWM_CONTROL_POLARITY_SHIFT(chan));
+
+	writel(value, kp->base + PWM_CONTROL_OFFSET);
+
+	kona_pwmc_apply_settings(kp, chan);
+
+	/* Wait for waveform to settle before gating off the clock */
+	ndelay(400);
+
+	clk_disable_unprepare(kp->clk);
+
+	return 0;
+}
+
+static int kona_pwmc_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct kona_pwmc *kp = to_kona_pwmc(chip);
+	int ret;
+
+	ret = clk_prepare_enable(kp->clk);
+	if (ret < 0) {
+		dev_err(chip->dev, "failed to enable clock: %d\n", ret);
+		return ret;
+	}
+
+	ret = kona_pwmc_config(chip, pwm, pwm->duty_cycle, pwm->period);
+	if (ret < 0) {
+		clk_disable_unprepare(kp->clk);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void kona_pwmc_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct kona_pwmc *kp = to_kona_pwmc(chip);
+	unsigned int chan = pwm->hwpwm;
+
+	/* Simulate a disable by configuring for zero duty */
+	writel(0, kp->base + DUTY_CYCLE_HIGH_OFFSET(chan));
+	kona_pwmc_apply_settings(kp, chan);
+
+	/* Wait for waveform to settle before gating off the clock */
+	ndelay(400);
+
+	clk_disable_unprepare(kp->clk);
+}
+
+static const struct pwm_ops kona_pwm_ops = {
+	.config = kona_pwmc_config,
+	.set_polarity = kona_pwmc_set_polarity,
+	.enable = kona_pwmc_enable,
+	.disable = kona_pwmc_disable,
+	.owner = THIS_MODULE,
+};
+
+static int kona_pwmc_probe(struct platform_device *pdev)
+{
+	struct kona_pwmc *kp;
+	struct resource *res;
+	unsigned int chan;
+	unsigned int value = 0;
+	int ret = 0;
+
+	kp = devm_kzalloc(&pdev->dev, sizeof(*kp), GFP_KERNEL);
+	if (kp == NULL)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, kp);
+
+	kp->chip.dev = &pdev->dev;
+	kp->chip.ops = &kona_pwm_ops;
+	kp->chip.base = -1;
+	kp->chip.npwm = 6;
+	kp->chip.of_xlate = of_pwm_xlate_with_flags;
+	kp->chip.of_pwm_n_cells = 3;
+	kp->chip.can_sleep = true;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	kp->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(kp->base))
+		return PTR_ERR(kp->base);
+
+	kp->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(kp->clk)) {
+		dev_err(&pdev->dev, "failed to get clock: %ld\n",
+			PTR_ERR(kp->clk));
+		return PTR_ERR(kp->clk);
+	}
+
+	ret = clk_prepare_enable(kp->clk);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to enable clock: %d\n", ret);
+		return ret;
+	}
+
+	/* Set smooth mode, push/pull, and normal polarity for all channels */
+	for (chan = 0; chan < kp->chip.npwm; chan++) {
+		value |= (1 << PWM_CONTROL_SMOOTH_SHIFT(chan));
+		value |= (1 << PWM_CONTROL_TYPE_SHIFT(chan));
+		value |= (1 << PWM_CONTROL_POLARITY_SHIFT(chan));
+	}
+
+	writel(value, kp->base + PWM_CONTROL_OFFSET);
+
+	clk_disable_unprepare(kp->clk);
+
+	ret = pwmchip_add(&kp->chip);
+	if (ret < 0)
+		dev_err(&pdev->dev, "failed to add PWM chip: %d\n", ret);
+
+	return ret;
+}
+
+static int kona_pwmc_remove(struct platform_device *pdev)
+{
+	struct kona_pwmc *kp = platform_get_drvdata(pdev);
+	unsigned int chan;
+
+	for (chan = 0; chan < kp->chip.npwm; chan++)
+		if (test_bit(PWMF_ENABLED, &kp->chip.pwms[chan].flags))
+			clk_disable_unprepare(kp->clk);
+
+	return pwmchip_remove(&kp->chip);
+}
+
+static const struct of_device_id bcm_kona_pwmc_dt[] = {
+	{ .compatible = "brcm,kona-pwm" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, bcm_kona_pwmc_dt);
+
+static struct platform_driver kona_pwmc_driver = {
+	.driver = {
+		.name = "bcm-kona-pwm",
+		.of_match_table = bcm_kona_pwmc_dt,
+	},
+	.probe = kona_pwmc_probe,
+	.remove = kona_pwmc_remove,
+};
+module_platform_driver(kona_pwmc_driver);
+
+MODULE_AUTHOR("Broadcom Corporation <bcm-kernel-feedback-list@broadcom.com>");
+MODULE_AUTHOR("Tim Kryger <tkryger@broadcom.com>");
+MODULE_DESCRIPTION("Broadcom Kona PWM driver");
+MODULE_LICENSE("GPL v2");
diff --git a/kernel/drivers/pwm/pwm-bcm2835.c b/kernel/drivers/pwm/pwm-bcm2835.c
new file mode 100644
index 000000000..b4c7f956b
--- /dev/null
+++ b/kernel/drivers/pwm/pwm-bcm2835.c
@@ -0,0 +1,205 @@
+/*
+ * Copyright 2014 Bart Tanghe <bart.tanghe@thomasmore.be>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+
+#define PWM_CONTROL		0x000
+#define PWM_CONTROL_SHIFT(x)	((x) * 8)
+#define PWM_CONTROL_MASK	0xff
+#define PWM_MODE		0x80		/* set timer in PWM mode */
+#define PWM_ENABLE		(1 << 0)
+#define PWM_POLARITY		(1 << 4)
+
+#define PERIOD(x)		(((x) * 0x10) + 0x10)
+#define DUTY(x)			(((x) * 0x10) + 0x14)
+
+#define MIN_PERIOD		108		/* 9.2 MHz max. PWM clock */
+
+struct bcm2835_pwm {
+	struct pwm_chip chip;
+	struct device *dev;
+	unsigned long scaler;
+	void __iomem *base;
+	struct clk *clk;
+};
+
+static inline struct bcm2835_pwm *to_bcm2835_pwm(struct pwm_chip *chip)
+{
+	return container_of(chip, struct bcm2835_pwm, chip);
+}
+
+static int bcm2835_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct bcm2835_pwm *pc = to_bcm2835_pwm(chip);
+	u32 value;
+
+	value = readl(pc->base + PWM_CONTROL);
+	value &= ~(PWM_CONTROL_MASK << PWM_CONTROL_SHIFT(pwm->hwpwm));
+	value |= (PWM_MODE << PWM_CONTROL_SHIFT(pwm->hwpwm));
+	writel(value, pc->base + PWM_CONTROL);
+
+	return 0;
+}
+
+static void bcm2835_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct bcm2835_pwm *pc = to_bcm2835_pwm(chip);
+	u32 value;
+
+	value = readl(pc->base + PWM_CONTROL);
+	value &= ~(PWM_CONTROL_MASK << PWM_CONTROL_SHIFT(pwm->hwpwm));
+	writel(value, pc->base + PWM_CONTROL);
+}
+
+static int bcm2835_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+			      int duty_ns, int period_ns)
+{
+	struct bcm2835_pwm *pc = to_bcm2835_pwm(chip);
+
+	if (period_ns <= MIN_PERIOD) {
+		dev_err(pc->dev, "period %d not supported, minimum %d\n",
+			period_ns, MIN_PERIOD);
+		return -EINVAL;
+	}
+
+	writel(duty_ns / pc->scaler, pc->base + DUTY(pwm->hwpwm));
+	writel(period_ns / pc->scaler, pc->base + PERIOD(pwm->hwpwm));
+
+	return 0;
+}
+
+static int bcm2835_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct bcm2835_pwm *pc = to_bcm2835_pwm(chip);
+	u32 value;
+
+	value = readl(pc->base + PWM_CONTROL);
+	value |= PWM_ENABLE << PWM_CONTROL_SHIFT(pwm->hwpwm);
+	writel(value, pc->base + PWM_CONTROL);
+
+	return 0;
+}
+
+static void bcm2835_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct bcm2835_pwm *pc = to_bcm2835_pwm(chip);
+	u32 value;
+
+	value = readl(pc->base + PWM_CONTROL);
+	value &= ~(PWM_ENABLE << PWM_CONTROL_SHIFT(pwm->hwpwm));
+	writel(value, pc->base + PWM_CONTROL);
+}
+
+static int bcm2835_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm,
+				enum pwm_polarity polarity)
+{
+	struct bcm2835_pwm *pc = to_bcm2835_pwm(chip);
+	u32 value;
+
+	value = readl(pc->base + PWM_CONTROL);
+
+	if (polarity == PWM_POLARITY_NORMAL)
+		value &= ~(PWM_POLARITY << PWM_CONTROL_SHIFT(pwm->hwpwm));
+	else
+		value |= PWM_POLARITY << PWM_CONTROL_SHIFT(pwm->hwpwm);
+
+	writel(value, pc->base + PWM_CONTROL);
+
+	return 0;
+}
+
+static const struct pwm_ops bcm2835_pwm_ops = {
+	.request = bcm2835_pwm_request,
+	.free = bcm2835_pwm_free,
+	.config = bcm2835_pwm_config,
+	.enable = bcm2835_pwm_enable,
+	.disable = bcm2835_pwm_disable,
+	.set_polarity = bcm2835_set_polarity,
+	.owner = THIS_MODULE,
+};
+
+static int bcm2835_pwm_probe(struct platform_device *pdev)
+{
+	struct bcm2835_pwm *pc;
+	struct resource *res;
+	int ret;
+
+	pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL);
+	if (!pc)
+		return -ENOMEM;
+
+	pc->dev = &pdev->dev;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	pc->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(pc->base))
+		return PTR_ERR(pc->base);
+
+	pc->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(pc->clk)) {
+		dev_err(&pdev->dev, "clock not found: %ld\n", PTR_ERR(pc->clk));
+		return PTR_ERR(pc->clk);
+	}
+
+	ret = clk_prepare_enable(pc->clk);
+	if (ret)
+		return ret;
+
+	pc->scaler = NSEC_PER_SEC / clk_get_rate(pc->clk);
+
+	pc->chip.dev = &pdev->dev;
+	pc->chip.ops = &bcm2835_pwm_ops;
+	pc->chip.npwm = 2;
+
+	platform_set_drvdata(pdev, pc);
+
+	ret = pwmchip_add(&pc->chip);
+	if (ret < 0)
+		goto add_fail;
+
+	return 0;
+
+add_fail:
+	clk_disable_unprepare(pc->clk);
+	return ret;
+}
+
+static int bcm2835_pwm_remove(struct platform_device *pdev)
+{
+	struct bcm2835_pwm *pc = platform_get_drvdata(pdev);
+
+	clk_disable_unprepare(pc->clk);
+
+	return pwmchip_remove(&pc->chip);
+}
+
+static const struct of_device_id bcm2835_pwm_of_match[] = {
+	{ .compatible = "brcm,bcm2835-pwm", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, bcm2835_pwm_of_match);
+
+static struct platform_driver bcm2835_pwm_driver = {
+	.driver = {
+		.name = "bcm2835-pwm",
+		.of_match_table = bcm2835_pwm_of_match,
+	},
+	.probe = bcm2835_pwm_probe,
+	.remove = bcm2835_pwm_remove,
+};
+module_platform_driver(bcm2835_pwm_driver);
+
+MODULE_AUTHOR("Bart Tanghe <bart.tanghe@thomasmore.be");
+MODULE_DESCRIPTION("Broadcom BCM2835 PWM driver");
+MODULE_LICENSE("GPL v2");
diff --git a/kernel/drivers/pwm/pwm-bfin.c b/kernel/drivers/pwm/pwm-bfin.c
new file mode 100644
index 000000000..7631ef194
--- /dev/null
+++ b/kernel/drivers/pwm/pwm-bfin.c
@@ -0,0 +1,159 @@
+/*
+ * Blackfin Pulse Width Modulation (PWM) core
+ *
+ * Copyright (c) 2011 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/slab.h>
+
+#include <asm/gptimers.h>
+#include <asm/portmux.h>
+
+struct bfin_pwm_chip {
+	struct pwm_chip chip;
+};
+
+struct bfin_pwm {
+	unsigned short pin;
+};
+
+static const unsigned short pwm_to_gptimer_per[] = {
+	P_TMR0, P_TMR1, P_TMR2, P_TMR3, P_TMR4, P_TMR5,
+	P_TMR6, P_TMR7, P_TMR8, P_TMR9, P_TMR10, P_TMR11,
+};
+
+static int bfin_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct bfin_pwm *priv;
+	int ret;
+
+	if (pwm->hwpwm >= ARRAY_SIZE(pwm_to_gptimer_per))
+		return -EINVAL;
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->pin = pwm_to_gptimer_per[pwm->hwpwm];
+
+	ret = peripheral_request(priv->pin, NULL);
+	if (ret) {
+		kfree(priv);
+		return ret;
+	}
+
+	pwm_set_chip_data(pwm, priv);
+
+	return 0;
+}
+
+static void bfin_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct bfin_pwm *priv = pwm_get_chip_data(pwm);
+
+	if (priv) {
+		peripheral_free(priv->pin);
+		kfree(priv);
+	}
+}
+
+static int bfin_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+		int duty_ns, int period_ns)
+{
+	struct bfin_pwm *priv = pwm_get_chip_data(pwm);
+	unsigned long period, duty;
+	unsigned long long val;
+
+	val = (unsigned long long)get_sclk() * period_ns;
+	do_div(val, NSEC_PER_SEC);
+	period = val;
+
+	val = (unsigned long long)period * duty_ns;
+	do_div(val, period_ns);
+	duty = period - val;
+
+	if (duty >= period)
+		duty = period - 1;
+
+	set_gptimer_config(priv->pin, TIMER_MODE_PWM | TIMER_PERIOD_CNT);
+	set_gptimer_pwidth(priv->pin, duty);
+	set_gptimer_period(priv->pin, period);
+
+	return 0;
+}
+
+static int bfin_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct bfin_pwm *priv = pwm_get_chip_data(pwm);
+
+	enable_gptimer(priv->pin);
+
+	return 0;
+}
+
+static void bfin_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct bfin_pwm *priv = pwm_get_chip_data(pwm);
+
+	disable_gptimer(priv->pin);
+}
+
+static struct pwm_ops bfin_pwm_ops = {
+	.request = bfin_pwm_request,
+	.free = bfin_pwm_free,
+	.config = bfin_pwm_config,
+	.enable = bfin_pwm_enable,
+	.disable = bfin_pwm_disable,
+	.owner = THIS_MODULE,
+};
+
+static int bfin_pwm_probe(struct platform_device *pdev)
+{
+	struct bfin_pwm_chip *pwm;
+	int ret;
+
+	pwm = devm_kzalloc(&pdev->dev, sizeof(*pwm), GFP_KERNEL);
+	if (!pwm) {
+		dev_err(&pdev->dev, "failed to allocate memory\n");
+		return -ENOMEM;
+	}
+
+	platform_set_drvdata(pdev, pwm);
+
+	pwm->chip.dev = &pdev->dev;
+	pwm->chip.ops = &bfin_pwm_ops;
+	pwm->chip.base = -1;
+	pwm->chip.npwm = 12;
+
+	ret = pwmchip_add(&pwm->chip);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int bfin_pwm_remove(struct platform_device *pdev)
+{
+	struct bfin_pwm_chip *pwm = platform_get_drvdata(pdev);
+
+	return pwmchip_remove(&pwm->chip);
+}
+
+static struct platform_driver bfin_pwm_driver = {
+	.driver = {
+		.name = "bfin-pwm",
+	},
+	.probe = bfin_pwm_probe,
+	.remove = bfin_pwm_remove,
+};
+
+module_platform_driver(bfin_pwm_driver);
+
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/pwm/pwm-clps711x.c b/kernel/drivers/pwm/pwm-clps711x.c
new file mode 100644
index 000000000..a80c10803
--- /dev/null
+++ b/kernel/drivers/pwm/pwm-clps711x.c
@@ -0,0 +1,175 @@
+/*
+ * Cirrus Logic CLPS711X PWM driver
+ *
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+
+struct clps711x_chip {
+	struct pwm_chip chip;
+	void __iomem *pmpcon;
+	struct clk *clk;
+	spinlock_t lock;
+};
+
+static inline struct clps711x_chip *to_clps711x_chip(struct pwm_chip *chip)
+{
+	return container_of(chip, struct clps711x_chip, chip);
+}
+
+static void clps711x_pwm_update_val(struct clps711x_chip *priv, u32 n, u32 v)
+{
+	/* PWM0 - bits 4..7, PWM1 - bits 8..11 */
+	u32 shift = (n + 1) * 4;
+	unsigned long flags;
+	u32 tmp;
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	tmp = readl(priv->pmpcon);
+	tmp &= ~(0xf << shift);
+	tmp |= v << shift;
+	writel(tmp, priv->pmpcon);
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static unsigned int clps711x_get_duty(struct pwm_device *pwm, unsigned int v)
+{
+	/* Duty cycle 0..15 max */
+	return DIV_ROUND_CLOSEST(v * 0xf, pwm_get_period(pwm));
+}
+
+static int clps711x_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct clps711x_chip *priv = to_clps711x_chip(chip);
+	unsigned int freq = clk_get_rate(priv->clk);
+
+	if (!freq)
+		return -EINVAL;
+
+	/* Store constant period value */
+	pwm_set_period(pwm, DIV_ROUND_CLOSEST(NSEC_PER_SEC, freq));
+
+	return 0;
+}
+
+static int clps711x_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+			       int duty_ns, int period_ns)
+{
+	struct clps711x_chip *priv = to_clps711x_chip(chip);
+	unsigned int duty;
+
+	if (period_ns != pwm_get_period(pwm))
+		return -EINVAL;
+
+	duty = clps711x_get_duty(pwm, duty_ns);
+	clps711x_pwm_update_val(priv, pwm->hwpwm, duty);
+
+	return 0;
+}
+
+static int clps711x_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct clps711x_chip *priv = to_clps711x_chip(chip);
+	unsigned int duty;
+
+	duty = clps711x_get_duty(pwm, pwm_get_duty_cycle(pwm));
+	clps711x_pwm_update_val(priv, pwm->hwpwm, duty);
+
+	return 0;
+}
+
+static void clps711x_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct clps711x_chip *priv = to_clps711x_chip(chip);
+
+	clps711x_pwm_update_val(priv, pwm->hwpwm, 0);
+}
+
+static const struct pwm_ops clps711x_pwm_ops = {
+	.request = clps711x_pwm_request,
+	.config = clps711x_pwm_config,
+	.enable = clps711x_pwm_enable,
+	.disable = clps711x_pwm_disable,
+	.owner = THIS_MODULE,
+};
+
+static struct pwm_device *clps711x_pwm_xlate(struct pwm_chip *chip,
+					     const struct of_phandle_args *args)
+{
+	if (args->args[0] >= chip->npwm)
+		return ERR_PTR(-EINVAL);
+
+	return pwm_request_from_chip(chip, args->args[0], NULL);
+}
+
+static int clps711x_pwm_probe(struct platform_device *pdev)
+{
+	struct clps711x_chip *priv;
+	struct resource *res;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->pmpcon = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(priv->pmpcon))
+		return PTR_ERR(priv->pmpcon);
+
+	priv->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(priv->clk))
+		return PTR_ERR(priv->clk);
+
+	priv->chip.ops = &clps711x_pwm_ops;
+	priv->chip.dev = &pdev->dev;
+	priv->chip.base = -1;
+	priv->chip.npwm = 2;
+	priv->chip.of_xlate = clps711x_pwm_xlate;
+	priv->chip.of_pwm_n_cells = 1;
+
+	spin_lock_init(&priv->lock);
+
+	platform_set_drvdata(pdev, priv);
+
+	return pwmchip_add(&priv->chip);
+}
+
+static int clps711x_pwm_remove(struct platform_device *pdev)
+{
+	struct clps711x_chip *priv = platform_get_drvdata(pdev);
+
+	return pwmchip_remove(&priv->chip);
+}
+
+static const struct of_device_id __maybe_unused clps711x_pwm_dt_ids[] = {
+	{ .compatible = "cirrus,clps711x-pwm", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, clps711x_pwm_dt_ids);
+
+static struct platform_driver clps711x_pwm_driver = {
+	.driver = {
+		.name = "clps711x-pwm",
+		.of_match_table = of_match_ptr(clps711x_pwm_dt_ids),
+	},
+	.probe = clps711x_pwm_probe,
+	.remove = clps711x_pwm_remove,
+};
+module_platform_driver(clps711x_pwm_driver);
+
+MODULE_AUTHOR("Alexander Shiyan <shc_work@mail.ru>");
+MODULE_DESCRIPTION("Cirrus Logic CLPS711X PWM driver");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/pwm/pwm-ep93xx.c b/kernel/drivers/pwm/pwm-ep93xx.c
new file mode 100644
index 000000000..e593e9c45
--- /dev/null
+++ b/kernel/drivers/pwm/pwm-ep93xx.c
@@ -0,0 +1,230 @@
+/*
+ * PWM framework driver for Cirrus Logic EP93xx
+ *
+ * Copyright (c) 2009        Matthieu Crapet <mcrapet@gmail.com>
+ * Copyright (c) 2009, 2013  H Hartley Sweeten <hsweeten@visionengravers.com>
+ *
+ * EP9301/02 have only one channel:
+ *   platform device ep93xx-pwm.1 - PWMOUT1 (EGPIO14)
+ *
+ * EP9307 has only one channel:
+ *   platform device ep93xx-pwm.0 - PWMOUT
+ *
+ * EP9312/15 have two channels:
+ *   platform device ep93xx-pwm.0 - PWMOUT
+ *   platform device ep93xx-pwm.1 - PWMOUT1 (EGPIO14)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/pwm.h>
+
+#include <asm/div64.h>
+
+#include <mach/platform.h>	/* for ep93xx_pwm_{acquire,release}_gpio() */
+
+#define EP93XX_PWMx_TERM_COUNT	0x00
+#define EP93XX_PWMx_DUTY_CYCLE	0x04
+#define EP93XX_PWMx_ENABLE	0x08
+#define EP93XX_PWMx_INVERT	0x0c
+
+struct ep93xx_pwm {
+	void __iomem *base;
+	struct clk *clk;
+	struct pwm_chip chip;
+};
+
+static inline struct ep93xx_pwm *to_ep93xx_pwm(struct pwm_chip *chip)
+{
+	return container_of(chip, struct ep93xx_pwm, chip);
+}
+
+static int ep93xx_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct platform_device *pdev = to_platform_device(chip->dev);
+
+	return ep93xx_pwm_acquire_gpio(pdev);
+}
+
+static void ep93xx_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct platform_device *pdev = to_platform_device(chip->dev);
+
+	ep93xx_pwm_release_gpio(pdev);
+}
+
+static int ep93xx_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+			     int duty_ns, int period_ns)
+{
+	struct ep93xx_pwm *ep93xx_pwm = to_ep93xx_pwm(chip);
+	void __iomem *base = ep93xx_pwm->base;
+	unsigned long long c;
+	unsigned long period_cycles;
+	unsigned long duty_cycles;
+	unsigned long term;
+	int ret = 0;
+
+	/*
+	 * The clock needs to be enabled to access the PWM registers.
+	 * Configuration can be changed at any time.
+	 */
+	if (!test_bit(PWMF_ENABLED, &pwm->flags)) {
+		ret = clk_enable(ep93xx_pwm->clk);
+		if (ret)
+			return ret;
+	}
+
+	c = clk_get_rate(ep93xx_pwm->clk);
+	c *= period_ns;
+	do_div(c, 1000000000);
+	period_cycles = c;
+
+	c = period_cycles;
+	c *= duty_ns;
+	do_div(c, period_ns);
+	duty_cycles = c;
+
+	if (period_cycles < 0x10000 && duty_cycles < 0x10000) {
+		term = readw(base + EP93XX_PWMx_TERM_COUNT);
+
+		/* Order is important if PWM is running */
+		if (period_cycles > term) {
+			writew(period_cycles, base + EP93XX_PWMx_TERM_COUNT);
+			writew(duty_cycles, base + EP93XX_PWMx_DUTY_CYCLE);
+		} else {
+			writew(duty_cycles, base + EP93XX_PWMx_DUTY_CYCLE);
+			writew(period_cycles, base + EP93XX_PWMx_TERM_COUNT);
+		}
+	} else {
+		ret = -EINVAL;
+	}
+
+	if (!test_bit(PWMF_ENABLED, &pwm->flags))
+		clk_disable(ep93xx_pwm->clk);
+
+	return ret;
+}
+
+static int ep93xx_pwm_polarity(struct pwm_chip *chip, struct pwm_device *pwm,
+			       enum pwm_polarity polarity)
+{
+	struct ep93xx_pwm *ep93xx_pwm = to_ep93xx_pwm(chip);
+	int ret;
+
+	/*
+	 * The clock needs to be enabled to access the PWM registers.
+	 * Polarity can only be changed when the PWM is disabled.
+	 */
+	ret = clk_enable(ep93xx_pwm->clk);
+	if (ret)
+		return ret;
+
+	if (polarity == PWM_POLARITY_INVERSED)
+		writew(0x1, ep93xx_pwm->base + EP93XX_PWMx_INVERT);
+	else
+		writew(0x0, ep93xx_pwm->base + EP93XX_PWMx_INVERT);
+
+	clk_disable(ep93xx_pwm->clk);
+
+	return 0;
+}
+
+static int ep93xx_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct ep93xx_pwm *ep93xx_pwm = to_ep93xx_pwm(chip);
+	int ret;
+
+	ret = clk_enable(ep93xx_pwm->clk);
+	if (ret)
+		return ret;
+
+	writew(0x1, ep93xx_pwm->base + EP93XX_PWMx_ENABLE);
+
+	return 0;
+}
+
+static void ep93xx_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct ep93xx_pwm *ep93xx_pwm = to_ep93xx_pwm(chip);
+
+	writew(0x0, ep93xx_pwm->base + EP93XX_PWMx_ENABLE);
+	clk_disable(ep93xx_pwm->clk);
+}
+
+static const struct pwm_ops ep93xx_pwm_ops = {
+	.request = ep93xx_pwm_request,
+	.free = ep93xx_pwm_free,
+	.config = ep93xx_pwm_config,
+	.set_polarity = ep93xx_pwm_polarity,
+	.enable = ep93xx_pwm_enable,
+	.disable = ep93xx_pwm_disable,
+	.owner = THIS_MODULE,
+};
+
+static int ep93xx_pwm_probe(struct platform_device *pdev)
+{
+	struct ep93xx_pwm *ep93xx_pwm;
+	struct resource *res;
+	int ret;
+
+	ep93xx_pwm = devm_kzalloc(&pdev->dev, sizeof(*ep93xx_pwm), GFP_KERNEL);
+	if (!ep93xx_pwm)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	ep93xx_pwm->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(ep93xx_pwm->base))
+		return PTR_ERR(ep93xx_pwm->base);
+
+	ep93xx_pwm->clk = devm_clk_get(&pdev->dev, "pwm_clk");
+	if (IS_ERR(ep93xx_pwm->clk))
+		return PTR_ERR(ep93xx_pwm->clk);
+
+	ep93xx_pwm->chip.dev = &pdev->dev;
+	ep93xx_pwm->chip.ops = &ep93xx_pwm_ops;
+	ep93xx_pwm->chip.base = -1;
+	ep93xx_pwm->chip.npwm = 1;
+
+	ret = pwmchip_add(&ep93xx_pwm->chip);
+	if (ret < 0)
+		return ret;
+
+	platform_set_drvdata(pdev, ep93xx_pwm);
+	return 0;
+}
+
+static int ep93xx_pwm_remove(struct platform_device *pdev)
+{
+	struct ep93xx_pwm *ep93xx_pwm = platform_get_drvdata(pdev);
+
+	return pwmchip_remove(&ep93xx_pwm->chip);
+}
+
+static struct platform_driver ep93xx_pwm_driver = {
+	.driver = {
+		.name = "ep93xx-pwm",
+	},
+	.probe = ep93xx_pwm_probe,
+	.remove = ep93xx_pwm_remove,
+};
+module_platform_driver(ep93xx_pwm_driver);
+
+MODULE_DESCRIPTION("Cirrus Logic EP93xx PWM driver");
+MODULE_AUTHOR("Matthieu Crapet <mcrapet@gmail.com>");
+MODULE_AUTHOR("H Hartley Sweeten <hsweeten@visionengravers.com>");
+MODULE_ALIAS("platform:ep93xx-pwm");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/pwm/pwm-fsl-ftm.c b/kernel/drivers/pwm/pwm-fsl-ftm.c
new file mode 100644
index 000000000..f9dfc8b64
--- /dev/null
+++ b/kernel/drivers/pwm/pwm-fsl-ftm.c
@@ -0,0 +1,556 @@
+/*
+ *  Freescale FlexTimer Module (FTM) PWM Driver
+ *
+ *  Copyright 2012-2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/pwm.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#define FTM_SC		0x00
+#define FTM_SC_CLK_MASK_SHIFT	3
+#define FTM_SC_CLK_MASK	(3 << FTM_SC_CLK_MASK_SHIFT)
+#define FTM_SC_CLK(c)	(((c) + 1) << FTM_SC_CLK_MASK_SHIFT)
+#define FTM_SC_PS_MASK	0x7
+
+#define FTM_CNT		0x04
+#define FTM_MOD		0x08
+
+#define FTM_CSC_BASE	0x0C
+#define FTM_CSC_MSB	BIT(5)
+#define FTM_CSC_MSA	BIT(4)
+#define FTM_CSC_ELSB	BIT(3)
+#define FTM_CSC_ELSA	BIT(2)
+#define FTM_CSC(_channel)	(FTM_CSC_BASE + ((_channel) * 8))
+
+#define FTM_CV_BASE	0x10
+#define FTM_CV(_channel)	(FTM_CV_BASE + ((_channel) * 8))
+
+#define FTM_CNTIN	0x4C
+#define FTM_STATUS	0x50
+
+#define FTM_MODE	0x54
+#define FTM_MODE_FTMEN	BIT(0)
+#define FTM_MODE_INIT	BIT(2)
+#define FTM_MODE_PWMSYNC	BIT(3)
+
+#define FTM_SYNC	0x58
+#define FTM_OUTINIT	0x5C
+#define FTM_OUTMASK	0x60
+#define FTM_COMBINE	0x64
+#define FTM_DEADTIME	0x68
+#define FTM_EXTTRIG	0x6C
+#define FTM_POL		0x70
+#define FTM_FMS		0x74
+#define FTM_FILTER	0x78
+#define FTM_FLTCTRL	0x7C
+#define FTM_QDCTRL	0x80
+#define FTM_CONF	0x84
+#define FTM_FLTPOL	0x88
+#define FTM_SYNCONF	0x8C
+#define FTM_INVCTRL	0x90
+#define FTM_SWOCTRL	0x94
+#define FTM_PWMLOAD	0x98
+
+enum fsl_pwm_clk {
+	FSL_PWM_CLK_SYS,
+	FSL_PWM_CLK_FIX,
+	FSL_PWM_CLK_EXT,
+	FSL_PWM_CLK_CNTEN,
+	FSL_PWM_CLK_MAX
+};
+
+struct fsl_pwm_chip {
+	struct pwm_chip chip;
+
+	struct mutex lock;
+
+	unsigned int use_count;
+	unsigned int cnt_select;
+	unsigned int clk_ps;
+
+	struct regmap *regmap;
+
+	int period_ns;
+
+	struct clk *clk[FSL_PWM_CLK_MAX];
+};
+
+static inline struct fsl_pwm_chip *to_fsl_chip(struct pwm_chip *chip)
+{
+	return container_of(chip, struct fsl_pwm_chip, chip);
+}
+
+static int fsl_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct fsl_pwm_chip *fpc = to_fsl_chip(chip);
+
+	return clk_prepare_enable(fpc->clk[FSL_PWM_CLK_SYS]);
+}
+
+static void fsl_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct fsl_pwm_chip *fpc = to_fsl_chip(chip);
+
+	clk_disable_unprepare(fpc->clk[FSL_PWM_CLK_SYS]);
+}
+
+static int fsl_pwm_calculate_default_ps(struct fsl_pwm_chip *fpc,
+					enum fsl_pwm_clk index)
+{
+	unsigned long sys_rate, cnt_rate;
+	unsigned long long ratio;
+
+	sys_rate = clk_get_rate(fpc->clk[FSL_PWM_CLK_SYS]);
+	if (!sys_rate)
+		return -EINVAL;
+
+	cnt_rate = clk_get_rate(fpc->clk[fpc->cnt_select]);
+	if (!cnt_rate)
+		return -EINVAL;
+
+	switch (index) {
+	case FSL_PWM_CLK_SYS:
+		fpc->clk_ps = 1;
+		break;
+	case FSL_PWM_CLK_FIX:
+		ratio = 2 * cnt_rate - 1;
+		do_div(ratio, sys_rate);
+		fpc->clk_ps = ratio;
+		break;
+	case FSL_PWM_CLK_EXT:
+		ratio = 4 * cnt_rate - 1;
+		do_div(ratio, sys_rate);
+		fpc->clk_ps = ratio;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static unsigned long fsl_pwm_calculate_cycles(struct fsl_pwm_chip *fpc,
+					      unsigned long period_ns)
+{
+	unsigned long long c, c0;
+
+	c = clk_get_rate(fpc->clk[fpc->cnt_select]);
+	c = c * period_ns;
+	do_div(c, 1000000000UL);
+
+	do {
+		c0 = c;
+		do_div(c0, (1 << fpc->clk_ps));
+		if (c0 <= 0xFFFF)
+			return (unsigned long)c0;
+	} while (++fpc->clk_ps < 8);
+
+	return 0;
+}
+
+static unsigned long fsl_pwm_calculate_period_cycles(struct fsl_pwm_chip *fpc,
+						     unsigned long period_ns,
+						     enum fsl_pwm_clk index)
+{
+	int ret;
+
+	ret = fsl_pwm_calculate_default_ps(fpc, index);
+	if (ret) {
+		dev_err(fpc->chip.dev,
+			"failed to calculate default prescaler: %d\n",
+			ret);
+		return 0;
+	}
+
+	return fsl_pwm_calculate_cycles(fpc, period_ns);
+}
+
+static unsigned long fsl_pwm_calculate_period(struct fsl_pwm_chip *fpc,
+					      unsigned long period_ns)
+{
+	enum fsl_pwm_clk m0, m1;
+	unsigned long fix_rate, ext_rate, cycles;
+
+	cycles = fsl_pwm_calculate_period_cycles(fpc, period_ns,
+			FSL_PWM_CLK_SYS);
+	if (cycles) {
+		fpc->cnt_select = FSL_PWM_CLK_SYS;
+		return cycles;
+	}
+
+	fix_rate = clk_get_rate(fpc->clk[FSL_PWM_CLK_FIX]);
+	ext_rate = clk_get_rate(fpc->clk[FSL_PWM_CLK_EXT]);
+
+	if (fix_rate > ext_rate) {
+		m0 = FSL_PWM_CLK_FIX;
+		m1 = FSL_PWM_CLK_EXT;
+	} else {
+		m0 = FSL_PWM_CLK_EXT;
+		m1 = FSL_PWM_CLK_FIX;
+	}
+
+	cycles = fsl_pwm_calculate_period_cycles(fpc, period_ns, m0);
+	if (cycles) {
+		fpc->cnt_select = m0;
+		return cycles;
+	}
+
+	fpc->cnt_select = m1;
+
+	return fsl_pwm_calculate_period_cycles(fpc, period_ns, m1);
+}
+
+static unsigned long fsl_pwm_calculate_duty(struct fsl_pwm_chip *fpc,
+					    unsigned long period_ns,
+					    unsigned long duty_ns)
+{
+	unsigned long long duty;
+	u32 val;
+
+	regmap_read(fpc->regmap, FTM_MOD, &val);
+	duty = (unsigned long long)duty_ns * (val + 1);
+	do_div(duty, period_ns);
+
+	return (unsigned long)duty;
+}
+
+static int fsl_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+			  int duty_ns, int period_ns)
+{
+	struct fsl_pwm_chip *fpc = to_fsl_chip(chip);
+	u32 period, duty;
+
+	mutex_lock(&fpc->lock);
+
+	/*
+	 * The Freescale FTM controller supports only a single period for
+	 * all PWM channels, therefore incompatible changes need to be
+	 * refused.
+	 */
+	if (fpc->period_ns && fpc->period_ns != period_ns) {
+		dev_err(fpc->chip.dev,
+			"conflicting period requested for PWM %u\n",
+			pwm->hwpwm);
+		mutex_unlock(&fpc->lock);
+		return -EBUSY;
+	}
+
+	if (!fpc->period_ns && duty_ns) {
+		period = fsl_pwm_calculate_period(fpc, period_ns);
+		if (!period) {
+			dev_err(fpc->chip.dev, "failed to calculate period\n");
+			mutex_unlock(&fpc->lock);
+			return -EINVAL;
+		}
+
+		regmap_update_bits(fpc->regmap, FTM_SC, FTM_SC_PS_MASK,
+				   fpc->clk_ps);
+		regmap_write(fpc->regmap, FTM_MOD, period - 1);
+
+		fpc->period_ns = period_ns;
+	}
+
+	mutex_unlock(&fpc->lock);
+
+	duty = fsl_pwm_calculate_duty(fpc, period_ns, duty_ns);
+
+	regmap_write(fpc->regmap, FTM_CSC(pwm->hwpwm),
+		     FTM_CSC_MSB | FTM_CSC_ELSB);
+	regmap_write(fpc->regmap, FTM_CV(pwm->hwpwm), duty);
+
+	return 0;
+}
+
+static int fsl_pwm_set_polarity(struct pwm_chip *chip,
+				struct pwm_device *pwm,
+				enum pwm_polarity polarity)
+{
+	struct fsl_pwm_chip *fpc = to_fsl_chip(chip);
+	u32 val;
+
+	regmap_read(fpc->regmap, FTM_POL, &val);
+
+	if (polarity == PWM_POLARITY_INVERSED)
+		val |= BIT(pwm->hwpwm);
+	else
+		val &= ~BIT(pwm->hwpwm);
+
+	regmap_write(fpc->regmap, FTM_POL, val);
+
+	return 0;
+}
+
+static int fsl_counter_clock_enable(struct fsl_pwm_chip *fpc)
+{
+	int ret;
+
+	if (fpc->use_count++ != 0)
+		return 0;
+
+	/* select counter clock source */
+	regmap_update_bits(fpc->regmap, FTM_SC, FTM_SC_CLK_MASK,
+			   FTM_SC_CLK(fpc->cnt_select));
+
+	ret = clk_prepare_enable(fpc->clk[fpc->cnt_select]);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(fpc->clk[FSL_PWM_CLK_CNTEN]);
+	if (ret) {
+		clk_disable_unprepare(fpc->clk[fpc->cnt_select]);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int fsl_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct fsl_pwm_chip *fpc = to_fsl_chip(chip);
+	int ret;
+
+	mutex_lock(&fpc->lock);
+	regmap_update_bits(fpc->regmap, FTM_OUTMASK, BIT(pwm->hwpwm), 0);
+
+	ret = fsl_counter_clock_enable(fpc);
+	mutex_unlock(&fpc->lock);
+
+	return ret;
+}
+
+static void fsl_counter_clock_disable(struct fsl_pwm_chip *fpc)
+{
+	/*
+	 * already disabled, do nothing
+	 */
+	if (fpc->use_count == 0)
+		return;
+
+	/* there are still users, so can't disable yet */
+	if (--fpc->use_count > 0)
+		return;
+
+	/* no users left, disable PWM counter clock */
+	regmap_update_bits(fpc->regmap, FTM_SC, FTM_SC_CLK_MASK, 0);
+
+	clk_disable_unprepare(fpc->clk[FSL_PWM_CLK_CNTEN]);
+	clk_disable_unprepare(fpc->clk[fpc->cnt_select]);
+}
+
+static void fsl_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct fsl_pwm_chip *fpc = to_fsl_chip(chip);
+	u32 val;
+
+	mutex_lock(&fpc->lock);
+	regmap_update_bits(fpc->regmap, FTM_OUTMASK, BIT(pwm->hwpwm),
+			   BIT(pwm->hwpwm));
+
+	fsl_counter_clock_disable(fpc);
+
+	regmap_read(fpc->regmap, FTM_OUTMASK, &val);
+	if ((val & 0xFF) == 0xFF)
+		fpc->period_ns = 0;
+
+	mutex_unlock(&fpc->lock);
+}
+
+static const struct pwm_ops fsl_pwm_ops = {
+	.request = fsl_pwm_request,
+	.free = fsl_pwm_free,
+	.config = fsl_pwm_config,
+	.set_polarity = fsl_pwm_set_polarity,
+	.enable = fsl_pwm_enable,
+	.disable = fsl_pwm_disable,
+	.owner = THIS_MODULE,
+};
+
+static int fsl_pwm_init(struct fsl_pwm_chip *fpc)
+{
+	int ret;
+
+	ret = clk_prepare_enable(fpc->clk[FSL_PWM_CLK_SYS]);
+	if (ret)
+		return ret;
+
+	regmap_write(fpc->regmap, FTM_CNTIN, 0x00);
+	regmap_write(fpc->regmap, FTM_OUTINIT, 0x00);
+	regmap_write(fpc->regmap, FTM_OUTMASK, 0xFF);
+
+	clk_disable_unprepare(fpc->clk[FSL_PWM_CLK_SYS]);
+
+	return 0;
+}
+
+static bool fsl_pwm_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case FTM_CNT:
+		return true;
+	}
+	return false;
+}
+
+static const struct regmap_config fsl_pwm_regmap_config = {
+	.reg_bits = 32,
+	.reg_stride = 4,
+	.val_bits = 32,
+
+	.max_register = FTM_PWMLOAD,
+	.volatile_reg = fsl_pwm_volatile_reg,
+	.cache_type = REGCACHE_RBTREE,
+};
+
+static int fsl_pwm_probe(struct platform_device *pdev)
+{
+	struct fsl_pwm_chip *fpc;
+	struct resource *res;
+	void __iomem *base;
+	int ret;
+
+	fpc = devm_kzalloc(&pdev->dev, sizeof(*fpc), GFP_KERNEL);
+	if (!fpc)
+		return -ENOMEM;
+
+	mutex_init(&fpc->lock);
+
+	fpc->chip.dev = &pdev->dev;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	fpc->regmap = devm_regmap_init_mmio_clk(&pdev->dev, "ftm_sys", base,
+						&fsl_pwm_regmap_config);
+	if (IS_ERR(fpc->regmap)) {
+		dev_err(&pdev->dev, "regmap init failed\n");
+		return PTR_ERR(fpc->regmap);
+	}
+
+	fpc->clk[FSL_PWM_CLK_SYS] = devm_clk_get(&pdev->dev, "ftm_sys");
+	if (IS_ERR(fpc->clk[FSL_PWM_CLK_SYS])) {
+		dev_err(&pdev->dev, "failed to get \"ftm_sys\" clock\n");
+		return PTR_ERR(fpc->clk[FSL_PWM_CLK_SYS]);
+	}
+
+	fpc->clk[FSL_PWM_CLK_FIX] = devm_clk_get(fpc->chip.dev, "ftm_fix");
+	if (IS_ERR(fpc->clk[FSL_PWM_CLK_FIX]))
+		return PTR_ERR(fpc->clk[FSL_PWM_CLK_FIX]);
+
+	fpc->clk[FSL_PWM_CLK_EXT] = devm_clk_get(fpc->chip.dev, "ftm_ext");
+	if (IS_ERR(fpc->clk[FSL_PWM_CLK_EXT]))
+		return PTR_ERR(fpc->clk[FSL_PWM_CLK_EXT]);
+
+	fpc->clk[FSL_PWM_CLK_CNTEN] =
+				devm_clk_get(fpc->chip.dev, "ftm_cnt_clk_en");
+	if (IS_ERR(fpc->clk[FSL_PWM_CLK_CNTEN]))
+		return PTR_ERR(fpc->clk[FSL_PWM_CLK_CNTEN]);
+
+	fpc->chip.ops = &fsl_pwm_ops;
+	fpc->chip.of_xlate = of_pwm_xlate_with_flags;
+	fpc->chip.of_pwm_n_cells = 3;
+	fpc->chip.base = -1;
+	fpc->chip.npwm = 8;
+	fpc->chip.can_sleep = true;
+
+	ret = pwmchip_add(&fpc->chip);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to add PWM chip: %d\n", ret);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, fpc);
+
+	return fsl_pwm_init(fpc);
+}
+
+static int fsl_pwm_remove(struct platform_device *pdev)
+{
+	struct fsl_pwm_chip *fpc = platform_get_drvdata(pdev);
+
+	return pwmchip_remove(&fpc->chip);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int fsl_pwm_suspend(struct device *dev)
+{
+	struct fsl_pwm_chip *fpc = dev_get_drvdata(dev);
+	u32 val;
+
+	regcache_cache_only(fpc->regmap, true);
+	regcache_mark_dirty(fpc->regmap);
+
+	/* read from cache */
+	regmap_read(fpc->regmap, FTM_OUTMASK, &val);
+	if ((val & 0xFF) != 0xFF) {
+		clk_disable_unprepare(fpc->clk[FSL_PWM_CLK_CNTEN]);
+		clk_disable_unprepare(fpc->clk[fpc->cnt_select]);
+		clk_disable_unprepare(fpc->clk[FSL_PWM_CLK_SYS]);
+	}
+
+	return 0;
+}
+
+static int fsl_pwm_resume(struct device *dev)
+{
+	struct fsl_pwm_chip *fpc = dev_get_drvdata(dev);
+	u32 val;
+
+	/* read from cache */
+	regmap_read(fpc->regmap, FTM_OUTMASK, &val);
+	if ((val & 0xFF) != 0xFF) {
+		clk_prepare_enable(fpc->clk[FSL_PWM_CLK_SYS]);
+		clk_prepare_enable(fpc->clk[fpc->cnt_select]);
+		clk_prepare_enable(fpc->clk[FSL_PWM_CLK_CNTEN]);
+	}
+
+	/* restore all registers from cache */
+	regcache_cache_only(fpc->regmap, false);
+	regcache_sync(fpc->regmap);
+
+	return 0;
+}
+#endif
+
+static const struct dev_pm_ops fsl_pwm_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(fsl_pwm_suspend, fsl_pwm_resume)
+};
+
+static const struct of_device_id fsl_pwm_dt_ids[] = {
+	{ .compatible = "fsl,vf610-ftm-pwm", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, fsl_pwm_dt_ids);
+
+static struct platform_driver fsl_pwm_driver = {
+	.driver = {
+		.name = "fsl-ftm-pwm",
+		.of_match_table = fsl_pwm_dt_ids,
+		.pm = &fsl_pwm_pm_ops,
+	},
+	.probe = fsl_pwm_probe,
+	.remove = fsl_pwm_remove,
+};
+module_platform_driver(fsl_pwm_driver);
+
+MODULE_DESCRIPTION("Freescale FlexTimer Module PWM Driver");
+MODULE_AUTHOR("Xiubo Li <Li.Xiubo@freescale.com>");
+MODULE_ALIAS("platform:fsl-ftm-pwm");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/pwm/pwm-img.c b/kernel/drivers/pwm/pwm-img.c
new file mode 100644
index 000000000..8a029f9bc
--- /dev/null
+++ b/kernel/drivers/pwm/pwm-img.c
@@ -0,0 +1,301 @@
+/*
+ * Imagination Technologies Pulse Width Modulator driver
+ *
+ * Copyright (c) 2014-2015, Imagination Technologies
+ *
+ * Based on drivers/pwm/pwm-tegra.c, Copyright (c) 2010, NVIDIA Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+/* PWM registers */
+#define PWM_CTRL_CFG				0x0000
+#define PWM_CTRL_CFG_NO_SUB_DIV			0
+#define PWM_CTRL_CFG_SUB_DIV0			1
+#define PWM_CTRL_CFG_SUB_DIV1			2
+#define PWM_CTRL_CFG_SUB_DIV0_DIV1		3
+#define PWM_CTRL_CFG_DIV_SHIFT(ch)		((ch) * 2 + 4)
+#define PWM_CTRL_CFG_DIV_MASK			0x3
+
+#define PWM_CH_CFG(ch)				(0x4 + (ch) * 4)
+#define PWM_CH_CFG_TMBASE_SHIFT			0
+#define PWM_CH_CFG_DUTY_SHIFT			16
+
+#define PERIP_PWM_PDM_CONTROL			0x0140
+#define PERIP_PWM_PDM_CONTROL_CH_MASK		0x1
+#define PERIP_PWM_PDM_CONTROL_CH_SHIFT(ch)	((ch) * 4)
+
+/*
+ * PWM period is specified with a timebase register,
+ * in number of step periods. The PWM duty cycle is also
+ * specified in step periods, in the [0, $timebase] range.
+ * In other words, the timebase imposes the duty cycle
+ * resolution. Therefore, let's constraint the timebase to
+ * a minimum value to allow a sane range of duty cycle values.
+ * Imposing a minimum timebase, will impose a maximum PWM frequency.
+ *
+ * The value chosen is completely arbitrary.
+ */
+#define MIN_TMBASE_STEPS			16
+
+struct img_pwm_soc_data {
+	u32 max_timebase;
+};
+
+struct img_pwm_chip {
+	struct device	*dev;
+	struct pwm_chip	chip;
+	struct clk	*pwm_clk;
+	struct clk	*sys_clk;
+	void __iomem	*base;
+	struct regmap	*periph_regs;
+	int		max_period_ns;
+	int		min_period_ns;
+	const struct img_pwm_soc_data   *data;
+};
+
+static inline struct img_pwm_chip *to_img_pwm_chip(struct pwm_chip *chip)
+{
+	return container_of(chip, struct img_pwm_chip, chip);
+}
+
+static inline void img_pwm_writel(struct img_pwm_chip *chip,
+				  u32 reg, u32 val)
+{
+	writel(val, chip->base + reg);
+}
+
+static inline u32 img_pwm_readl(struct img_pwm_chip *chip,
+					 u32 reg)
+{
+	return readl(chip->base + reg);
+}
+
+static int img_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+			  int duty_ns, int period_ns)
+{
+	u32 val, div, duty, timebase;
+	unsigned long mul, output_clk_hz, input_clk_hz;
+	struct img_pwm_chip *pwm_chip = to_img_pwm_chip(chip);
+	unsigned int max_timebase = pwm_chip->data->max_timebase;
+
+	if (period_ns < pwm_chip->min_period_ns ||
+	    period_ns > pwm_chip->max_period_ns) {
+		dev_err(chip->dev, "configured period not in range\n");
+		return -ERANGE;
+	}
+
+	input_clk_hz = clk_get_rate(pwm_chip->pwm_clk);
+	output_clk_hz = DIV_ROUND_UP(NSEC_PER_SEC, period_ns);
+
+	mul = DIV_ROUND_UP(input_clk_hz, output_clk_hz);
+	if (mul <= max_timebase) {
+		div = PWM_CTRL_CFG_NO_SUB_DIV;
+		timebase = DIV_ROUND_UP(mul, 1);
+	} else if (mul <= max_timebase * 8) {
+		div = PWM_CTRL_CFG_SUB_DIV0;
+		timebase = DIV_ROUND_UP(mul, 8);
+	} else if (mul <= max_timebase * 64) {
+		div = PWM_CTRL_CFG_SUB_DIV1;
+		timebase = DIV_ROUND_UP(mul, 64);
+	} else if (mul <= max_timebase * 512) {
+		div = PWM_CTRL_CFG_SUB_DIV0_DIV1;
+		timebase = DIV_ROUND_UP(mul, 512);
+	} else if (mul > max_timebase * 512) {
+		dev_err(chip->dev,
+			"failed to configure timebase steps/divider value\n");
+		return -EINVAL;
+	}
+
+	duty = DIV_ROUND_UP(timebase * duty_ns, period_ns);
+
+	val = img_pwm_readl(pwm_chip, PWM_CTRL_CFG);
+	val &= ~(PWM_CTRL_CFG_DIV_MASK << PWM_CTRL_CFG_DIV_SHIFT(pwm->hwpwm));
+	val |= (div & PWM_CTRL_CFG_DIV_MASK) <<
+		PWM_CTRL_CFG_DIV_SHIFT(pwm->hwpwm);
+	img_pwm_writel(pwm_chip, PWM_CTRL_CFG, val);
+
+	val = (duty << PWM_CH_CFG_DUTY_SHIFT) |
+	      (timebase << PWM_CH_CFG_TMBASE_SHIFT);
+	img_pwm_writel(pwm_chip, PWM_CH_CFG(pwm->hwpwm), val);
+
+	return 0;
+}
+
+static int img_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	u32 val;
+	struct img_pwm_chip *pwm_chip = to_img_pwm_chip(chip);
+
+	val = img_pwm_readl(pwm_chip, PWM_CTRL_CFG);
+	val |= BIT(pwm->hwpwm);
+	img_pwm_writel(pwm_chip, PWM_CTRL_CFG, val);
+
+	regmap_update_bits(pwm_chip->periph_regs, PERIP_PWM_PDM_CONTROL,
+			   PERIP_PWM_PDM_CONTROL_CH_MASK <<
+			   PERIP_PWM_PDM_CONTROL_CH_SHIFT(pwm->hwpwm), 0);
+
+	return 0;
+}
+
+static void img_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	u32 val;
+	struct img_pwm_chip *pwm_chip = to_img_pwm_chip(chip);
+
+	val = img_pwm_readl(pwm_chip, PWM_CTRL_CFG);
+	val &= ~BIT(pwm->hwpwm);
+	img_pwm_writel(pwm_chip, PWM_CTRL_CFG, val);
+}
+
+static const struct pwm_ops img_pwm_ops = {
+	.config = img_pwm_config,
+	.enable = img_pwm_enable,
+	.disable = img_pwm_disable,
+	.owner = THIS_MODULE,
+};
+
+static const struct img_pwm_soc_data pistachio_pwm = {
+	.max_timebase = 255,
+};
+
+static const struct of_device_id img_pwm_of_match[] = {
+	{
+		.compatible = "img,pistachio-pwm",
+		.data = &pistachio_pwm,
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, img_pwm_of_match);
+
+static int img_pwm_probe(struct platform_device *pdev)
+{
+	int ret;
+	u64 val;
+	unsigned long clk_rate;
+	struct resource *res;
+	struct img_pwm_chip *pwm;
+	const struct of_device_id *of_dev_id;
+
+	pwm = devm_kzalloc(&pdev->dev, sizeof(*pwm), GFP_KERNEL);
+	if (!pwm)
+		return -ENOMEM;
+
+	pwm->dev = &pdev->dev;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	pwm->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(pwm->base))
+		return PTR_ERR(pwm->base);
+
+	of_dev_id = of_match_device(img_pwm_of_match, &pdev->dev);
+	if (!of_dev_id)
+		return -ENODEV;
+	pwm->data = of_dev_id->data;
+
+	pwm->periph_regs = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
+							   "img,cr-periph");
+	if (IS_ERR(pwm->periph_regs))
+		return PTR_ERR(pwm->periph_regs);
+
+	pwm->sys_clk = devm_clk_get(&pdev->dev, "sys");
+	if (IS_ERR(pwm->sys_clk)) {
+		dev_err(&pdev->dev, "failed to get system clock\n");
+		return PTR_ERR(pwm->sys_clk);
+	}
+
+	pwm->pwm_clk = devm_clk_get(&pdev->dev, "pwm");
+	if (IS_ERR(pwm->pwm_clk)) {
+		dev_err(&pdev->dev, "failed to get pwm clock\n");
+		return PTR_ERR(pwm->pwm_clk);
+	}
+
+	ret = clk_prepare_enable(pwm->sys_clk);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "could not prepare or enable sys clock\n");
+		return ret;
+	}
+
+	ret = clk_prepare_enable(pwm->pwm_clk);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "could not prepare or enable pwm clock\n");
+		goto disable_sysclk;
+	}
+
+	clk_rate = clk_get_rate(pwm->pwm_clk);
+
+	/* The maximum input clock divider is 512 */
+	val = (u64)NSEC_PER_SEC * 512 * pwm->data->max_timebase;
+	do_div(val, clk_rate);
+	pwm->max_period_ns = val;
+
+	val = (u64)NSEC_PER_SEC * MIN_TMBASE_STEPS;
+	do_div(val, clk_rate);
+	pwm->min_period_ns = val;
+
+	pwm->chip.dev = &pdev->dev;
+	pwm->chip.ops = &img_pwm_ops;
+	pwm->chip.base = -1;
+	pwm->chip.npwm = 4;
+
+	ret = pwmchip_add(&pwm->chip);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "pwmchip_add failed: %d\n", ret);
+		goto disable_pwmclk;
+	}
+
+	platform_set_drvdata(pdev, pwm);
+	return 0;
+
+disable_pwmclk:
+	clk_disable_unprepare(pwm->pwm_clk);
+disable_sysclk:
+	clk_disable_unprepare(pwm->sys_clk);
+	return ret;
+}
+
+static int img_pwm_remove(struct platform_device *pdev)
+{
+	struct img_pwm_chip *pwm_chip = platform_get_drvdata(pdev);
+	u32 val;
+	unsigned int i;
+
+	for (i = 0; i < pwm_chip->chip.npwm; i++) {
+		val = img_pwm_readl(pwm_chip, PWM_CTRL_CFG);
+		val &= ~BIT(i);
+		img_pwm_writel(pwm_chip, PWM_CTRL_CFG, val);
+	}
+
+	clk_disable_unprepare(pwm_chip->pwm_clk);
+	clk_disable_unprepare(pwm_chip->sys_clk);
+
+	return pwmchip_remove(&pwm_chip->chip);
+}
+
+static struct platform_driver img_pwm_driver = {
+	.driver = {
+		.name = "img-pwm",
+		.of_match_table = img_pwm_of_match,
+	},
+	.probe = img_pwm_probe,
+	.remove = img_pwm_remove,
+};
+module_platform_driver(img_pwm_driver);
+
+MODULE_AUTHOR("Sai Masarapu <Sai.Masarapu@imgtec.com>");
+MODULE_DESCRIPTION("Imagination Technologies PWM DAC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/kernel/drivers/pwm/pwm-imx.c b/kernel/drivers/pwm/pwm-imx.c
new file mode 100644
index 000000000..66d6f0c5c
--- /dev/null
+++ b/kernel/drivers/pwm/pwm-imx.c
@@ -0,0 +1,348 @@
+/*
+ * simple driver for PWM (Pulse Width Modulator) controller
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Derived from pxa PWM driver by eric miao <eric.miao@marvell.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/pwm.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+
+/* i.MX1 and i.MX21 share the same PWM function block: */
+
+#define MX1_PWMC			0x00   /* PWM Control Register */
+#define MX1_PWMS			0x04   /* PWM Sample Register */
+#define MX1_PWMP			0x08   /* PWM Period Register */
+
+#define MX1_PWMC_EN			(1 << 4)
+
+/* i.MX27, i.MX31, i.MX35 share the same PWM function block: */
+
+#define MX3_PWMCR			0x00    /* PWM Control Register */
+#define MX3_PWMSR			0x04    /* PWM Status Register */
+#define MX3_PWMSAR			0x0C    /* PWM Sample Register */
+#define MX3_PWMPR			0x10    /* PWM Period Register */
+#define MX3_PWMCR_PRESCALER(x)		((((x) - 1) & 0xFFF) << 4)
+#define MX3_PWMCR_DOZEEN		(1 << 24)
+#define MX3_PWMCR_WAITEN		(1 << 23)
+#define MX3_PWMCR_DBGEN			(1 << 22)
+#define MX3_PWMCR_CLKSRC_IPG_HIGH	(2 << 16)
+#define MX3_PWMCR_CLKSRC_IPG		(1 << 16)
+#define MX3_PWMCR_SWR			(1 << 3)
+#define MX3_PWMCR_EN			(1 << 0)
+#define MX3_PWMSR_FIFOAV_4WORDS		0x4
+#define MX3_PWMSR_FIFOAV_MASK		0x7
+
+#define MX3_PWM_SWR_LOOP		5
+
+struct imx_chip {
+	struct clk	*clk_per;
+	struct clk	*clk_ipg;
+
+	void __iomem	*mmio_base;
+
+	struct pwm_chip	chip;
+
+	int (*config)(struct pwm_chip *chip,
+		struct pwm_device *pwm, int duty_ns, int period_ns);
+	void (*set_enable)(struct pwm_chip *chip, bool enable);
+};
+
+#define to_imx_chip(chip)	container_of(chip, struct imx_chip, chip)
+
+static int imx_pwm_config_v1(struct pwm_chip *chip,
+		struct pwm_device *pwm, int duty_ns, int period_ns)
+{
+	struct imx_chip *imx = to_imx_chip(chip);
+
+	/*
+	 * The PWM subsystem allows for exact frequencies. However,
+	 * I cannot connect a scope on my device to the PWM line and
+	 * thus cannot provide the program the PWM controller
+	 * exactly. Instead, I'm relying on the fact that the
+	 * Bootloader (u-boot or WinCE+haret) has programmed the PWM
+	 * function group already. So I'll just modify the PWM sample
+	 * register to follow the ratio of duty_ns vs. period_ns
+	 * accordingly.
+	 *
+	 * This is good enough for programming the brightness of
+	 * the LCD backlight.
+	 *
+	 * The real implementation would divide PERCLK[0] first by
+	 * both the prescaler (/1 .. /128) and then by CLKSEL
+	 * (/2 .. /16).
+	 */
+	u32 max = readl(imx->mmio_base + MX1_PWMP);
+	u32 p = max * duty_ns / period_ns;
+	writel(max - p, imx->mmio_base + MX1_PWMS);
+
+	return 0;
+}
+
+static void imx_pwm_set_enable_v1(struct pwm_chip *chip, bool enable)
+{
+	struct imx_chip *imx = to_imx_chip(chip);
+	u32 val;
+
+	val = readl(imx->mmio_base + MX1_PWMC);
+
+	if (enable)
+		val |= MX1_PWMC_EN;
+	else
+		val &= ~MX1_PWMC_EN;
+
+	writel(val, imx->mmio_base + MX1_PWMC);
+}
+
+static int imx_pwm_config_v2(struct pwm_chip *chip,
+		struct pwm_device *pwm, int duty_ns, int period_ns)
+{
+	struct imx_chip *imx = to_imx_chip(chip);
+	struct device *dev = chip->dev;
+	unsigned long long c;
+	unsigned long period_cycles, duty_cycles, prescale;
+	unsigned int period_ms;
+	bool enable = test_bit(PWMF_ENABLED, &pwm->flags);
+	int wait_count = 0, fifoav;
+	u32 cr, sr;
+
+	/*
+	 * i.MX PWMv2 has a 4-word sample FIFO.
+	 * In order to avoid FIFO overflow issue, we do software reset
+	 * to clear all sample FIFO if the controller is disabled or
+	 * wait for a full PWM cycle to get a relinquished FIFO slot
+	 * when the controller is enabled and the FIFO is fully loaded.
+	 */
+	if (enable) {
+		sr = readl(imx->mmio_base + MX3_PWMSR);
+		fifoav = sr & MX3_PWMSR_FIFOAV_MASK;
+		if (fifoav == MX3_PWMSR_FIFOAV_4WORDS) {
+			period_ms = DIV_ROUND_UP(pwm->period, NSEC_PER_MSEC);
+			msleep(period_ms);
+
+			sr = readl(imx->mmio_base + MX3_PWMSR);
+			if (fifoav == (sr & MX3_PWMSR_FIFOAV_MASK))
+				dev_warn(dev, "there is no free FIFO slot\n");
+		}
+	} else {
+		writel(MX3_PWMCR_SWR, imx->mmio_base + MX3_PWMCR);
+		do {
+			usleep_range(200, 1000);
+			cr = readl(imx->mmio_base + MX3_PWMCR);
+		} while ((cr & MX3_PWMCR_SWR) &&
+			 (wait_count++ < MX3_PWM_SWR_LOOP));
+
+		if (cr & MX3_PWMCR_SWR)
+			dev_warn(dev, "software reset timeout\n");
+	}
+
+	c = clk_get_rate(imx->clk_per);
+	c = c * period_ns;
+	do_div(c, 1000000000);
+	period_cycles = c;
+
+	prescale = period_cycles / 0x10000 + 1;
+
+	period_cycles /= prescale;
+	c = (unsigned long long)period_cycles * duty_ns;
+	do_div(c, period_ns);
+	duty_cycles = c;
+
+	/*
+	 * according to imx pwm RM, the real period value should be
+	 * PERIOD value in PWMPR plus 2.
+	 */
+	if (period_cycles > 2)
+		period_cycles -= 2;
+	else
+		period_cycles = 0;
+
+	writel(duty_cycles, imx->mmio_base + MX3_PWMSAR);
+	writel(period_cycles, imx->mmio_base + MX3_PWMPR);
+
+	cr = MX3_PWMCR_PRESCALER(prescale) |
+		MX3_PWMCR_DOZEEN | MX3_PWMCR_WAITEN |
+		MX3_PWMCR_DBGEN | MX3_PWMCR_CLKSRC_IPG_HIGH;
+
+	if (enable)
+		cr |= MX3_PWMCR_EN;
+
+	writel(cr, imx->mmio_base + MX3_PWMCR);
+
+	return 0;
+}
+
+static void imx_pwm_set_enable_v2(struct pwm_chip *chip, bool enable)
+{
+	struct imx_chip *imx = to_imx_chip(chip);
+	u32 val;
+
+	val = readl(imx->mmio_base + MX3_PWMCR);
+
+	if (enable)
+		val |= MX3_PWMCR_EN;
+	else
+		val &= ~MX3_PWMCR_EN;
+
+	writel(val, imx->mmio_base + MX3_PWMCR);
+}
+
+static int imx_pwm_config(struct pwm_chip *chip,
+		struct pwm_device *pwm, int duty_ns, int period_ns)
+{
+	struct imx_chip *imx = to_imx_chip(chip);
+	int ret;
+
+	ret = clk_prepare_enable(imx->clk_ipg);
+	if (ret)
+		return ret;
+
+	ret = imx->config(chip, pwm, duty_ns, period_ns);
+
+	clk_disable_unprepare(imx->clk_ipg);
+
+	return ret;
+}
+
+static int imx_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct imx_chip *imx = to_imx_chip(chip);
+	int ret;
+
+	ret = clk_prepare_enable(imx->clk_per);
+	if (ret)
+		return ret;
+
+	imx->set_enable(chip, true);
+
+	return 0;
+}
+
+static void imx_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct imx_chip *imx = to_imx_chip(chip);
+
+	imx->set_enable(chip, false);
+
+	clk_disable_unprepare(imx->clk_per);
+}
+
+static struct pwm_ops imx_pwm_ops = {
+	.enable = imx_pwm_enable,
+	.disable = imx_pwm_disable,
+	.config = imx_pwm_config,
+	.owner = THIS_MODULE,
+};
+
+struct imx_pwm_data {
+	int (*config)(struct pwm_chip *chip,
+		struct pwm_device *pwm, int duty_ns, int period_ns);
+	void (*set_enable)(struct pwm_chip *chip, bool enable);
+};
+
+static struct imx_pwm_data imx_pwm_data_v1 = {
+	.config = imx_pwm_config_v1,
+	.set_enable = imx_pwm_set_enable_v1,
+};
+
+static struct imx_pwm_data imx_pwm_data_v2 = {
+	.config = imx_pwm_config_v2,
+	.set_enable = imx_pwm_set_enable_v2,
+};
+
+static const struct of_device_id imx_pwm_dt_ids[] = {
+	{ .compatible = "fsl,imx1-pwm", .data = &imx_pwm_data_v1, },
+	{ .compatible = "fsl,imx27-pwm", .data = &imx_pwm_data_v2, },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, imx_pwm_dt_ids);
+
+static int imx_pwm_probe(struct platform_device *pdev)
+{
+	const struct of_device_id *of_id =
+			of_match_device(imx_pwm_dt_ids, &pdev->dev);
+	const struct imx_pwm_data *data;
+	struct imx_chip *imx;
+	struct resource *r;
+	int ret = 0;
+
+	if (!of_id)
+		return -ENODEV;
+
+	imx = devm_kzalloc(&pdev->dev, sizeof(*imx), GFP_KERNEL);
+	if (imx == NULL)
+		return -ENOMEM;
+
+	imx->clk_per = devm_clk_get(&pdev->dev, "per");
+	if (IS_ERR(imx->clk_per)) {
+		dev_err(&pdev->dev, "getting per clock failed with %ld\n",
+				PTR_ERR(imx->clk_per));
+		return PTR_ERR(imx->clk_per);
+	}
+
+	imx->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
+	if (IS_ERR(imx->clk_ipg)) {
+		dev_err(&pdev->dev, "getting ipg clock failed with %ld\n",
+				PTR_ERR(imx->clk_ipg));
+		return PTR_ERR(imx->clk_ipg);
+	}
+
+	imx->chip.ops = &imx_pwm_ops;
+	imx->chip.dev = &pdev->dev;
+	imx->chip.base = -1;
+	imx->chip.npwm = 1;
+	imx->chip.can_sleep = true;
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	imx->mmio_base = devm_ioremap_resource(&pdev->dev, r);
+	if (IS_ERR(imx->mmio_base))
+		return PTR_ERR(imx->mmio_base);
+
+	data = of_id->data;
+	imx->config = data->config;
+	imx->set_enable = data->set_enable;
+
+	ret = pwmchip_add(&imx->chip);
+	if (ret < 0)
+		return ret;
+
+	platform_set_drvdata(pdev, imx);
+	return 0;
+}
+
+static int imx_pwm_remove(struct platform_device *pdev)
+{
+	struct imx_chip *imx;
+
+	imx = platform_get_drvdata(pdev);
+	if (imx == NULL)
+		return -ENODEV;
+
+	return pwmchip_remove(&imx->chip);
+}
+
+static struct platform_driver imx_pwm_driver = {
+	.driver		= {
+		.name	= "imx-pwm",
+		.of_match_table = imx_pwm_dt_ids,
+	},
+	.probe		= imx_pwm_probe,
+	.remove		= imx_pwm_remove,
+};
+
+module_platform_driver(imx_pwm_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
diff --git a/kernel/drivers/pwm/pwm-jz4740.c b/kernel/drivers/pwm/pwm-jz4740.c
new file mode 100644
index 000000000..76d131502
--- /dev/null
+++ b/kernel/drivers/pwm/pwm-jz4740.c
@@ -0,0 +1,206 @@
+/*
+ *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
+ *  JZ4740 platform PWM support
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under  the terms of the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+
+#include <asm/mach-jz4740/gpio.h>
+#include <asm/mach-jz4740/timer.h>
+
+#define NUM_PWM 8
+
+static const unsigned int jz4740_pwm_gpio_list[NUM_PWM] = {
+	JZ_GPIO_PWM0,
+	JZ_GPIO_PWM1,
+	JZ_GPIO_PWM2,
+	JZ_GPIO_PWM3,
+	JZ_GPIO_PWM4,
+	JZ_GPIO_PWM5,
+	JZ_GPIO_PWM6,
+	JZ_GPIO_PWM7,
+};
+
+struct jz4740_pwm_chip {
+	struct pwm_chip chip;
+	struct clk *clk;
+};
+
+static inline struct jz4740_pwm_chip *to_jz4740(struct pwm_chip *chip)
+{
+	return container_of(chip, struct jz4740_pwm_chip, chip);
+}
+
+static int jz4740_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	unsigned int gpio = jz4740_pwm_gpio_list[pwm->hwpwm];
+	int ret;
+
+	/*
+	 * Timers 0 and 1 are used for system tasks, so they are unavailable
+	 * for use as PWMs.
+	 */
+	if (pwm->hwpwm < 2)
+		return -EBUSY;
+
+	ret = gpio_request(gpio, pwm->label);
+	if (ret) {
+		dev_err(chip->dev, "Failed to request GPIO#%u for PWM: %d\n",
+			gpio, ret);
+		return ret;
+	}
+
+	jz_gpio_set_function(gpio, JZ_GPIO_FUNC_PWM);
+
+	jz4740_timer_start(pwm->hwpwm);
+
+	return 0;
+}
+
+static void jz4740_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	unsigned int gpio = jz4740_pwm_gpio_list[pwm->hwpwm];
+
+	jz4740_timer_set_ctrl(pwm->hwpwm, 0);
+
+	jz_gpio_set_function(gpio, JZ_GPIO_FUNC_NONE);
+	gpio_free(gpio);
+
+	jz4740_timer_stop(pwm->hwpwm);
+}
+
+static int jz4740_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	uint32_t ctrl = jz4740_timer_get_ctrl(pwm->pwm);
+
+	ctrl |= JZ_TIMER_CTRL_PWM_ENABLE;
+	jz4740_timer_set_ctrl(pwm->hwpwm, ctrl);
+	jz4740_timer_enable(pwm->hwpwm);
+
+	return 0;
+}
+
+static void jz4740_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	uint32_t ctrl = jz4740_timer_get_ctrl(pwm->hwpwm);
+
+	ctrl &= ~JZ_TIMER_CTRL_PWM_ENABLE;
+	jz4740_timer_disable(pwm->hwpwm);
+	jz4740_timer_set_ctrl(pwm->hwpwm, ctrl);
+}
+
+static int jz4740_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+			     int duty_ns, int period_ns)
+{
+	struct jz4740_pwm_chip *jz4740 = to_jz4740(pwm->chip);
+	unsigned long long tmp;
+	unsigned long period, duty;
+	unsigned int prescaler = 0;
+	uint16_t ctrl;
+	bool is_enabled;
+
+	tmp = (unsigned long long)clk_get_rate(jz4740->clk) * period_ns;
+	do_div(tmp, 1000000000);
+	period = tmp;
+
+	while (period > 0xffff && prescaler < 6) {
+		period >>= 2;
+		++prescaler;
+	}
+
+	if (prescaler == 6)
+		return -EINVAL;
+
+	tmp = (unsigned long long)period * duty_ns;
+	do_div(tmp, period_ns);
+	duty = period - tmp;
+
+	if (duty >= period)
+		duty = period - 1;
+
+	is_enabled = jz4740_timer_is_enabled(pwm->hwpwm);
+	if (is_enabled)
+		jz4740_pwm_disable(chip, pwm);
+
+	jz4740_timer_set_count(pwm->hwpwm, 0);
+	jz4740_timer_set_duty(pwm->hwpwm, duty);
+	jz4740_timer_set_period(pwm->hwpwm, period);
+
+	ctrl = JZ_TIMER_CTRL_PRESCALER(prescaler) | JZ_TIMER_CTRL_SRC_EXT |
+		JZ_TIMER_CTRL_PWM_ABBRUPT_SHUTDOWN;
+
+	jz4740_timer_set_ctrl(pwm->hwpwm, ctrl);
+
+	if (is_enabled)
+		jz4740_pwm_enable(chip, pwm);
+
+	return 0;
+}
+
+static const struct pwm_ops jz4740_pwm_ops = {
+	.request = jz4740_pwm_request,
+	.free = jz4740_pwm_free,
+	.config = jz4740_pwm_config,
+	.enable = jz4740_pwm_enable,
+	.disable = jz4740_pwm_disable,
+	.owner = THIS_MODULE,
+};
+
+static int jz4740_pwm_probe(struct platform_device *pdev)
+{
+	struct jz4740_pwm_chip *jz4740;
+
+	jz4740 = devm_kzalloc(&pdev->dev, sizeof(*jz4740), GFP_KERNEL);
+	if (!jz4740)
+		return -ENOMEM;
+
+	jz4740->clk = devm_clk_get(&pdev->dev, "ext");
+	if (IS_ERR(jz4740->clk))
+		return PTR_ERR(jz4740->clk);
+
+	jz4740->chip.dev = &pdev->dev;
+	jz4740->chip.ops = &jz4740_pwm_ops;
+	jz4740->chip.npwm = NUM_PWM;
+	jz4740->chip.base = -1;
+
+	platform_set_drvdata(pdev, jz4740);
+
+	return pwmchip_add(&jz4740->chip);
+}
+
+static int jz4740_pwm_remove(struct platform_device *pdev)
+{
+	struct jz4740_pwm_chip *jz4740 = platform_get_drvdata(pdev);
+
+	return pwmchip_remove(&jz4740->chip);
+}
+
+static struct platform_driver jz4740_pwm_driver = {
+	.driver = {
+		.name = "jz4740-pwm",
+	},
+	.probe = jz4740_pwm_probe,
+	.remove = jz4740_pwm_remove,
+};
+module_platform_driver(jz4740_pwm_driver);
+
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("Ingenic JZ4740 PWM driver");
+MODULE_ALIAS("platform:jz4740-pwm");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/pwm/pwm-lp3943.c b/kernel/drivers/pwm/pwm-lp3943.c
new file mode 100644
index 000000000..872ea76a4
--- /dev/null
+++ b/kernel/drivers/pwm/pwm-lp3943.c
@@ -0,0 +1,316 @@
+/*
+ * TI/National Semiconductor LP3943 PWM driver
+ *
+ * Copyright 2013 Texas Instruments
+ *
+ * Author: Milo Kim <milo.kim@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2.
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/mfd/lp3943.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/slab.h>
+
+#define LP3943_MAX_DUTY			255
+#define LP3943_MIN_PERIOD		6250
+#define LP3943_MAX_PERIOD		1600000
+
+struct lp3943_pwm {
+	struct pwm_chip chip;
+	struct lp3943 *lp3943;
+	struct lp3943_platform_data *pdata;
+};
+
+static inline struct lp3943_pwm *to_lp3943_pwm(struct pwm_chip *_chip)
+{
+	return container_of(_chip, struct lp3943_pwm, chip);
+}
+
+static struct lp3943_pwm_map *
+lp3943_pwm_request_map(struct lp3943_pwm *lp3943_pwm, int hwpwm)
+{
+	struct lp3943_platform_data *pdata = lp3943_pwm->pdata;
+	struct lp3943 *lp3943 = lp3943_pwm->lp3943;
+	struct lp3943_pwm_map *pwm_map;
+	int i, offset;
+
+	pwm_map = kzalloc(sizeof(*pwm_map), GFP_KERNEL);
+	if (!pwm_map)
+		return ERR_PTR(-ENOMEM);
+
+	pwm_map->output = pdata->pwms[hwpwm]->output;
+	pwm_map->num_outputs = pdata->pwms[hwpwm]->num_outputs;
+
+	for (i = 0; i < pwm_map->num_outputs; i++) {
+		offset = pwm_map->output[i];
+
+		/* Return an error if the pin is already assigned */
+		if (test_and_set_bit(offset, &lp3943->pin_used)) {
+			kfree(pwm_map);
+			return ERR_PTR(-EBUSY);
+		}
+	}
+
+	return pwm_map;
+}
+
+static int lp3943_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct lp3943_pwm *lp3943_pwm = to_lp3943_pwm(chip);
+	struct lp3943_pwm_map *pwm_map;
+
+	pwm_map = lp3943_pwm_request_map(lp3943_pwm, pwm->hwpwm);
+	if (IS_ERR(pwm_map))
+		return PTR_ERR(pwm_map);
+
+	return pwm_set_chip_data(pwm, pwm_map);
+}
+
+static void lp3943_pwm_free_map(struct lp3943_pwm *lp3943_pwm,
+				struct lp3943_pwm_map *pwm_map)
+{
+	struct lp3943 *lp3943 = lp3943_pwm->lp3943;
+	int i, offset;
+
+	for (i = 0; i < pwm_map->num_outputs; i++) {
+		offset = pwm_map->output[i];
+		clear_bit(offset, &lp3943->pin_used);
+	}
+
+	kfree(pwm_map);
+}
+
+static void lp3943_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct lp3943_pwm *lp3943_pwm = to_lp3943_pwm(chip);
+	struct lp3943_pwm_map *pwm_map = pwm_get_chip_data(pwm);
+
+	lp3943_pwm_free_map(lp3943_pwm, pwm_map);
+}
+
+static int lp3943_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+			     int duty_ns, int period_ns)
+{
+	struct lp3943_pwm *lp3943_pwm = to_lp3943_pwm(chip);
+	struct lp3943 *lp3943 = lp3943_pwm->lp3943;
+	u8 val, reg_duty, reg_prescale;
+	int err;
+
+	/*
+	 * How to configure the LP3943 PWMs
+	 *
+	 * 1) Period = 6250 ~ 1600000
+	 * 2) Prescale = period / 6250 -1
+	 * 3) Duty = input duty
+	 *
+	 * Prescale and duty are register values
+	 */
+
+	if (pwm->hwpwm == 0) {
+		reg_prescale = LP3943_REG_PRESCALE0;
+		reg_duty     = LP3943_REG_PWM0;
+	} else {
+		reg_prescale = LP3943_REG_PRESCALE1;
+		reg_duty     = LP3943_REG_PWM1;
+	}
+
+	period_ns = clamp(period_ns, LP3943_MIN_PERIOD, LP3943_MAX_PERIOD);
+	val       = (u8)(period_ns / LP3943_MIN_PERIOD - 1);
+
+	err = lp3943_write_byte(lp3943, reg_prescale, val);
+	if (err)
+		return err;
+
+	val = (u8)(duty_ns * LP3943_MAX_DUTY / period_ns);
+
+	return lp3943_write_byte(lp3943, reg_duty, val);
+}
+
+static int lp3943_pwm_set_mode(struct lp3943_pwm *lp3943_pwm,
+			       struct lp3943_pwm_map *pwm_map,
+			       u8 val)
+{
+	struct lp3943 *lp3943 = lp3943_pwm->lp3943;
+	const struct lp3943_reg_cfg *mux = lp3943->mux_cfg;
+	int i, index, err;
+
+	for (i = 0; i < pwm_map->num_outputs; i++) {
+		index = pwm_map->output[i];
+		err = lp3943_update_bits(lp3943, mux[index].reg,
+					 mux[index].mask,
+					 val << mux[index].shift);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
+static int lp3943_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct lp3943_pwm *lp3943_pwm = to_lp3943_pwm(chip);
+	struct lp3943_pwm_map *pwm_map = pwm_get_chip_data(pwm);
+	u8 val;
+
+	if (pwm->hwpwm == 0)
+		val = LP3943_DIM_PWM0;
+	else
+		val = LP3943_DIM_PWM1;
+
+	/*
+	 * Each PWM generator is set to control any of outputs of LP3943.
+	 * To enable/disable the PWM, these output pins should be configured.
+	 */
+
+	return lp3943_pwm_set_mode(lp3943_pwm, pwm_map, val);
+}
+
+static void lp3943_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct lp3943_pwm *lp3943_pwm = to_lp3943_pwm(chip);
+	struct lp3943_pwm_map *pwm_map = pwm_get_chip_data(pwm);
+
+	/*
+	 * LP3943 outputs are open-drain, so the pin should be configured
+	 * when the PWM is disabled.
+	 */
+
+	lp3943_pwm_set_mode(lp3943_pwm, pwm_map, LP3943_GPIO_OUT_HIGH);
+}
+
+static const struct pwm_ops lp3943_pwm_ops = {
+	.request	= lp3943_pwm_request,
+	.free		= lp3943_pwm_free,
+	.config		= lp3943_pwm_config,
+	.enable		= lp3943_pwm_enable,
+	.disable	= lp3943_pwm_disable,
+	.owner		= THIS_MODULE,
+};
+
+static int lp3943_pwm_parse_dt(struct device *dev,
+			       struct lp3943_pwm *lp3943_pwm)
+{
+	static const char * const name[] = { "ti,pwm0", "ti,pwm1", };
+	struct device_node *node = dev->of_node;
+	struct lp3943_platform_data *pdata;
+	struct lp3943_pwm_map *pwm_map;
+	enum lp3943_pwm_output *output;
+	int i, err, proplen, count = 0;
+	u32 num_outputs;
+
+	if (!node)
+		return -EINVAL;
+
+	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
+
+	/*
+	 * Read the output map configuration from the device tree.
+	 * Each of the two PWM generators can drive zero or more outputs.
+	 */
+
+	for (i = 0; i < LP3943_NUM_PWMS; i++) {
+		if (!of_get_property(node, name[i], &proplen))
+			continue;
+
+		num_outputs = proplen / sizeof(u32);
+		if (num_outputs == 0)
+			continue;
+
+		output = devm_kzalloc(dev, sizeof(*output) * num_outputs,
+				      GFP_KERNEL);
+		if (!output)
+			return -ENOMEM;
+
+		err = of_property_read_u32_array(node, name[i], output,
+						 num_outputs);
+		if (err)
+			return err;
+
+		pwm_map = devm_kzalloc(dev, sizeof(*pwm_map), GFP_KERNEL);
+		if (!pwm_map)
+			return -ENOMEM;
+
+		pwm_map->output = output;
+		pwm_map->num_outputs = num_outputs;
+		pdata->pwms[i] = pwm_map;
+
+		count++;
+	}
+
+	if (count == 0)
+		return -ENODATA;
+
+	lp3943_pwm->pdata = pdata;
+	return 0;
+}
+
+static int lp3943_pwm_probe(struct platform_device *pdev)
+{
+	struct lp3943 *lp3943 = dev_get_drvdata(pdev->dev.parent);
+	struct lp3943_pwm *lp3943_pwm;
+	int ret;
+
+	lp3943_pwm = devm_kzalloc(&pdev->dev, sizeof(*lp3943_pwm), GFP_KERNEL);
+	if (!lp3943_pwm)
+		return -ENOMEM;
+
+	lp3943_pwm->pdata = lp3943->pdata;
+	if (!lp3943_pwm->pdata) {
+		if (IS_ENABLED(CONFIG_OF))
+			ret = lp3943_pwm_parse_dt(&pdev->dev, lp3943_pwm);
+		else
+			ret = -ENODEV;
+
+		if (ret)
+			return ret;
+	}
+
+	lp3943_pwm->lp3943 = lp3943;
+	lp3943_pwm->chip.dev = &pdev->dev;
+	lp3943_pwm->chip.ops = &lp3943_pwm_ops;
+	lp3943_pwm->chip.npwm = LP3943_NUM_PWMS;
+	lp3943_pwm->chip.can_sleep = true;
+
+	platform_set_drvdata(pdev, lp3943_pwm);
+
+	return pwmchip_add(&lp3943_pwm->chip);
+}
+
+static int lp3943_pwm_remove(struct platform_device *pdev)
+{
+	struct lp3943_pwm *lp3943_pwm = platform_get_drvdata(pdev);
+
+	return pwmchip_remove(&lp3943_pwm->chip);
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id lp3943_pwm_of_match[] = {
+	{ .compatible = "ti,lp3943-pwm", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, lp3943_pwm_of_match);
+#endif
+
+static struct platform_driver lp3943_pwm_driver = {
+	.probe = lp3943_pwm_probe,
+	.remove = lp3943_pwm_remove,
+	.driver = {
+		.name = "lp3943-pwm",
+		.of_match_table = of_match_ptr(lp3943_pwm_of_match),
+	},
+};
+module_platform_driver(lp3943_pwm_driver);
+
+MODULE_DESCRIPTION("LP3943 PWM driver");
+MODULE_ALIAS("platform:lp3943-pwm");
+MODULE_AUTHOR("Milo Kim");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/pwm/pwm-lpc32xx.c b/kernel/drivers/pwm/pwm-lpc32xx.c
new file mode 100644
index 000000000..9fde60ce8
--- /dev/null
+++ b/kernel/drivers/pwm/pwm-lpc32xx.c
@@ -0,0 +1,181 @@
+/*
+ * Copyright 2012 Alexandre Pereira da Silva <aletes.xgr@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/slab.h>
+
+struct lpc32xx_pwm_chip {
+	struct pwm_chip chip;
+	struct clk *clk;
+	void __iomem *base;
+};
+
+#define PWM_ENABLE	(1 << 31)
+#define PWM_RELOADV(x)	(((x) & 0xFF) << 8)
+#define PWM_DUTY(x)	((x) & 0xFF)
+
+#define to_lpc32xx_pwm_chip(_chip) \
+	container_of(_chip, struct lpc32xx_pwm_chip, chip)
+
+static int lpc32xx_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+			      int duty_ns, int period_ns)
+{
+	struct lpc32xx_pwm_chip *lpc32xx = to_lpc32xx_pwm_chip(chip);
+	unsigned long long c;
+	int period_cycles, duty_cycles;
+	u32 val;
+
+	c = clk_get_rate(lpc32xx->clk) / 256;
+	c = c * period_ns;
+	do_div(c, NSEC_PER_SEC);
+
+	/* Handle high and low extremes */
+	if (c == 0)
+		c = 1;
+	if (c > 255)
+		c = 0; /* 0 set division by 256 */
+	period_cycles = c;
+
+	/* The duty-cycle value is as follows:
+	 *
+	 *  DUTY-CYCLE     HIGH LEVEL
+	 *      1            99.9%
+	 *      25           90.0%
+	 *      128          50.0%
+	 *      220          10.0%
+	 *      255           0.1%
+	 *      0             0.0%
+	 *
+	 * In other words, the register value is duty-cycle % 256 with
+	 * duty-cycle in the range 1-256.
+	 */
+	c = 256 * duty_ns;
+	do_div(c, period_ns);
+	if (c > 255)
+		c = 255;
+	duty_cycles = 256 - c;
+
+	val = readl(lpc32xx->base + (pwm->hwpwm << 2));
+	val &= ~0xFFFF;
+	val |= PWM_RELOADV(period_cycles) | PWM_DUTY(duty_cycles);
+	writel(val, lpc32xx->base + (pwm->hwpwm << 2));
+
+	return 0;
+}
+
+static int lpc32xx_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct lpc32xx_pwm_chip *lpc32xx = to_lpc32xx_pwm_chip(chip);
+	u32 val;
+	int ret;
+
+	ret = clk_enable(lpc32xx->clk);
+	if (ret)
+		return ret;
+
+	val = readl(lpc32xx->base + (pwm->hwpwm << 2));
+	val |= PWM_ENABLE;
+	writel(val, lpc32xx->base + (pwm->hwpwm << 2));
+
+	return 0;
+}
+
+static void lpc32xx_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct lpc32xx_pwm_chip *lpc32xx = to_lpc32xx_pwm_chip(chip);
+	u32 val;
+
+	val = readl(lpc32xx->base + (pwm->hwpwm << 2));
+	val &= ~PWM_ENABLE;
+	writel(val, lpc32xx->base + (pwm->hwpwm << 2));
+
+	clk_disable(lpc32xx->clk);
+}
+
+static const struct pwm_ops lpc32xx_pwm_ops = {
+	.config = lpc32xx_pwm_config,
+	.enable = lpc32xx_pwm_enable,
+	.disable = lpc32xx_pwm_disable,
+	.owner = THIS_MODULE,
+};
+
+static int lpc32xx_pwm_probe(struct platform_device *pdev)
+{
+	struct lpc32xx_pwm_chip *lpc32xx;
+	struct resource *res;
+	int ret;
+
+	lpc32xx = devm_kzalloc(&pdev->dev, sizeof(*lpc32xx), GFP_KERNEL);
+	if (!lpc32xx)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	lpc32xx->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(lpc32xx->base))
+		return PTR_ERR(lpc32xx->base);
+
+	lpc32xx->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(lpc32xx->clk))
+		return PTR_ERR(lpc32xx->clk);
+
+	lpc32xx->chip.dev = &pdev->dev;
+	lpc32xx->chip.ops = &lpc32xx_pwm_ops;
+	lpc32xx->chip.npwm = 2;
+	lpc32xx->chip.base = -1;
+
+	ret = pwmchip_add(&lpc32xx->chip);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to add PWM chip, error %d\n", ret);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, lpc32xx);
+
+	return 0;
+}
+
+static int lpc32xx_pwm_remove(struct platform_device *pdev)
+{
+	struct lpc32xx_pwm_chip *lpc32xx = platform_get_drvdata(pdev);
+	unsigned int i;
+
+	for (i = 0; i < lpc32xx->chip.npwm; i++)
+		pwm_disable(&lpc32xx->chip.pwms[i]);
+
+	return pwmchip_remove(&lpc32xx->chip);
+}
+
+static const struct of_device_id lpc32xx_pwm_dt_ids[] = {
+	{ .compatible = "nxp,lpc3220-pwm", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, lpc32xx_pwm_dt_ids);
+
+static struct platform_driver lpc32xx_pwm_driver = {
+	.driver = {
+		.name = "lpc32xx-pwm",
+		.of_match_table = lpc32xx_pwm_dt_ids,
+	},
+	.probe = lpc32xx_pwm_probe,
+	.remove = lpc32xx_pwm_remove,
+};
+module_platform_driver(lpc32xx_pwm_driver);
+
+MODULE_ALIAS("platform:lpc32xx-pwm");
+MODULE_AUTHOR("Alexandre Pereira da Silva <aletes.xgr@gmail.com>");
+MODULE_DESCRIPTION("LPC32XX PWM Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/kernel/drivers/pwm/pwm-lpss-pci.c b/kernel/drivers/pwm/pwm-lpss-pci.c
new file mode 100644
index 000000000..cf20d2bea
--- /dev/null
+++ b/kernel/drivers/pwm/pwm-lpss-pci.c
@@ -0,0 +1,64 @@
+/*
+ * Intel Low Power Subsystem PWM controller PCI driver
+ *
+ * Copyright (C) 2014, Intel Corporation
+ *
+ * Derived from the original pwm-lpss.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+
+#include "pwm-lpss.h"
+
+static int pwm_lpss_probe_pci(struct pci_dev *pdev,
+			      const struct pci_device_id *id)
+{
+	const struct pwm_lpss_boardinfo *info;
+	struct pwm_lpss_chip *lpwm;
+	int err;
+
+	err = pcim_enable_device(pdev);
+	if (err < 0)
+		return err;
+
+	info = (struct pwm_lpss_boardinfo *)id->driver_data;
+	lpwm = pwm_lpss_probe(&pdev->dev, &pdev->resource[0], info);
+	if (IS_ERR(lpwm))
+		return PTR_ERR(lpwm);
+
+	pci_set_drvdata(pdev, lpwm);
+	return 0;
+}
+
+static void pwm_lpss_remove_pci(struct pci_dev *pdev)
+{
+	struct pwm_lpss_chip *lpwm = pci_get_drvdata(pdev);
+
+	pwm_lpss_remove(lpwm);
+}
+
+static const struct pci_device_id pwm_lpss_pci_ids[] = {
+	{ PCI_VDEVICE(INTEL, 0x0f08), (unsigned long)&pwm_lpss_byt_info},
+	{ PCI_VDEVICE(INTEL, 0x0f09), (unsigned long)&pwm_lpss_byt_info},
+	{ PCI_VDEVICE(INTEL, 0x2288), (unsigned long)&pwm_lpss_bsw_info},
+	{ PCI_VDEVICE(INTEL, 0x2289), (unsigned long)&pwm_lpss_bsw_info},
+	{ },
+};
+MODULE_DEVICE_TABLE(pci, pwm_lpss_pci_ids);
+
+static struct pci_driver pwm_lpss_driver_pci = {
+	.name = "pwm-lpss",
+	.id_table = pwm_lpss_pci_ids,
+	.probe = pwm_lpss_probe_pci,
+	.remove = pwm_lpss_remove_pci,
+};
+module_pci_driver(pwm_lpss_driver_pci);
+
+MODULE_DESCRIPTION("PWM PCI driver for Intel LPSS");
+MODULE_LICENSE("GPL v2");
diff --git a/kernel/drivers/pwm/pwm-lpss-platform.c b/kernel/drivers/pwm/pwm-lpss-platform.c
new file mode 100644
index 000000000..18a9c880a
--- /dev/null
+++ b/kernel/drivers/pwm/pwm-lpss-platform.c
@@ -0,0 +1,68 @@
+/*
+ * Intel Low Power Subsystem PWM controller driver
+ *
+ * Copyright (C) 2014, Intel Corporation
+ *
+ * Derived from the original pwm-lpss.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/acpi.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include "pwm-lpss.h"
+
+static int pwm_lpss_probe_platform(struct platform_device *pdev)
+{
+	const struct pwm_lpss_boardinfo *info;
+	const struct acpi_device_id *id;
+	struct pwm_lpss_chip *lpwm;
+	struct resource *r;
+
+	id = acpi_match_device(pdev->dev.driver->acpi_match_table, &pdev->dev);
+	if (!id)
+		return -ENODEV;
+
+	info = (const struct pwm_lpss_boardinfo *)id->driver_data;
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	lpwm = pwm_lpss_probe(&pdev->dev, r, info);
+	if (IS_ERR(lpwm))
+		return PTR_ERR(lpwm);
+
+	platform_set_drvdata(pdev, lpwm);
+	return 0;
+}
+
+static int pwm_lpss_remove_platform(struct platform_device *pdev)
+{
+	struct pwm_lpss_chip *lpwm = platform_get_drvdata(pdev);
+
+	return pwm_lpss_remove(lpwm);
+}
+
+static const struct acpi_device_id pwm_lpss_acpi_match[] = {
+	{ "80860F09", (unsigned long)&pwm_lpss_byt_info },
+	{ "80862288", (unsigned long)&pwm_lpss_bsw_info },
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, pwm_lpss_acpi_match);
+
+static struct platform_driver pwm_lpss_driver_platform = {
+	.driver = {
+		.name = "pwm-lpss",
+		.acpi_match_table = pwm_lpss_acpi_match,
+	},
+	.probe = pwm_lpss_probe_platform,
+	.remove = pwm_lpss_remove_platform,
+};
+module_platform_driver(pwm_lpss_driver_platform);
+
+MODULE_DESCRIPTION("PWM platform driver for Intel LPSS");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:pwm-lpss");
diff --git a/kernel/drivers/pwm/pwm-lpss.c b/kernel/drivers/pwm/pwm-lpss.c
new file mode 100644
index 000000000..e9798253a
--- /dev/null
+++ b/kernel/drivers/pwm/pwm-lpss.c
@@ -0,0 +1,163 @@
+/*
+ * Intel Low Power Subsystem PWM controller driver
+ *
+ * Copyright (C) 2014, Intel Corporation
+ * Author: Mika Westerberg <mika.westerberg@linux.intel.com>
+ * Author: Chew Kean Ho <kean.ho.chew@intel.com>
+ * Author: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
+ * Author: Chew Chiau Ee <chiau.ee.chew@intel.com>
+ * Author: Alan Cox <alan@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "pwm-lpss.h"
+
+#define PWM				0x00000000
+#define PWM_ENABLE			BIT(31)
+#define PWM_SW_UPDATE			BIT(30)
+#define PWM_BASE_UNIT_SHIFT		8
+#define PWM_BASE_UNIT_MASK		0x00ffff00
+#define PWM_ON_TIME_DIV_MASK		0x000000ff
+#define PWM_DIVISION_CORRECTION		0x2
+#define PWM_LIMIT			(0x8000 + PWM_DIVISION_CORRECTION)
+#define NSECS_PER_SEC			1000000000UL
+
+struct pwm_lpss_chip {
+	struct pwm_chip chip;
+	void __iomem *regs;
+	unsigned long clk_rate;
+};
+
+/* BayTrail */
+const struct pwm_lpss_boardinfo pwm_lpss_byt_info = {
+	.clk_rate = 25000000
+};
+EXPORT_SYMBOL_GPL(pwm_lpss_byt_info);
+
+/* Braswell */
+const struct pwm_lpss_boardinfo pwm_lpss_bsw_info = {
+	.clk_rate = 19200000
+};
+EXPORT_SYMBOL_GPL(pwm_lpss_bsw_info);
+
+static inline struct pwm_lpss_chip *to_lpwm(struct pwm_chip *chip)
+{
+	return container_of(chip, struct pwm_lpss_chip, chip);
+}
+
+static int pwm_lpss_config(struct pwm_chip *chip, struct pwm_device *pwm,
+			   int duty_ns, int period_ns)
+{
+	struct pwm_lpss_chip *lpwm = to_lpwm(chip);
+	u8 on_time_div;
+	unsigned long c;
+	unsigned long long base_unit, freq = NSECS_PER_SEC;
+	u32 ctrl;
+
+	do_div(freq, period_ns);
+
+	/* The equation is: base_unit = ((freq / c) * 65536) + correction */
+	base_unit = freq * 65536;
+
+	c = lpwm->clk_rate;
+	if (!c)
+		return -EINVAL;
+
+	do_div(base_unit, c);
+	base_unit += PWM_DIVISION_CORRECTION;
+	if (base_unit > PWM_LIMIT)
+		return -EINVAL;
+
+	if (duty_ns <= 0)
+		duty_ns = 1;
+	on_time_div = 255 - (255 * duty_ns / period_ns);
+
+	ctrl = readl(lpwm->regs + PWM);
+	ctrl &= ~(PWM_BASE_UNIT_MASK | PWM_ON_TIME_DIV_MASK);
+	ctrl |= (u16) base_unit << PWM_BASE_UNIT_SHIFT;
+	ctrl |= on_time_div;
+	/* request PWM to update on next cycle */
+	ctrl |= PWM_SW_UPDATE;
+	writel(ctrl, lpwm->regs + PWM);
+
+	return 0;
+}
+
+static int pwm_lpss_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct pwm_lpss_chip *lpwm = to_lpwm(chip);
+	u32 ctrl;
+
+	ctrl = readl(lpwm->regs + PWM);
+	writel(ctrl | PWM_ENABLE, lpwm->regs + PWM);
+
+	return 0;
+}
+
+static void pwm_lpss_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct pwm_lpss_chip *lpwm = to_lpwm(chip);
+	u32 ctrl;
+
+	ctrl = readl(lpwm->regs + PWM);
+	writel(ctrl & ~PWM_ENABLE, lpwm->regs + PWM);
+}
+
+static const struct pwm_ops pwm_lpss_ops = {
+	.config = pwm_lpss_config,
+	.enable = pwm_lpss_enable,
+	.disable = pwm_lpss_disable,
+	.owner = THIS_MODULE,
+};
+
+struct pwm_lpss_chip *pwm_lpss_probe(struct device *dev, struct resource *r,
+				     const struct pwm_lpss_boardinfo *info)
+{
+	struct pwm_lpss_chip *lpwm;
+	int ret;
+
+	lpwm = devm_kzalloc(dev, sizeof(*lpwm), GFP_KERNEL);
+	if (!lpwm)
+		return ERR_PTR(-ENOMEM);
+
+	lpwm->regs = devm_ioremap_resource(dev, r);
+	if (IS_ERR(lpwm->regs))
+		return ERR_CAST(lpwm->regs);
+
+	lpwm->clk_rate = info->clk_rate;
+	lpwm->chip.dev = dev;
+	lpwm->chip.ops = &pwm_lpss_ops;
+	lpwm->chip.base = -1;
+	lpwm->chip.npwm = 1;
+
+	ret = pwmchip_add(&lpwm->chip);
+	if (ret) {
+		dev_err(dev, "failed to add PWM chip: %d\n", ret);
+		return ERR_PTR(ret);
+	}
+
+	return lpwm;
+}
+EXPORT_SYMBOL_GPL(pwm_lpss_probe);
+
+int pwm_lpss_remove(struct pwm_lpss_chip *lpwm)
+{
+	u32 ctrl;
+
+	ctrl = readl(lpwm->regs + PWM);
+	writel(ctrl & ~PWM_ENABLE, lpwm->regs + PWM);
+
+	return pwmchip_remove(&lpwm->chip);
+}
+EXPORT_SYMBOL_GPL(pwm_lpss_remove);
+
+MODULE_DESCRIPTION("PWM driver for Intel LPSS");
+MODULE_AUTHOR("Mika Westerberg <mika.westerberg@linux.intel.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/kernel/drivers/pwm/pwm-lpss.h b/kernel/drivers/pwm/pwm-lpss.h
new file mode 100644
index 000000000..aa041bb1b
--- /dev/null
+++ b/kernel/drivers/pwm/pwm-lpss.h
@@ -0,0 +1,32 @@
+/*
+ * Intel Low Power Subsystem PWM controller driver
+ *
+ * Copyright (C) 2014, Intel Corporation
+ *
+ * Derived from the original pwm-lpss.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __PWM_LPSS_H
+#define __PWM_LPSS_H
+
+#include <linux/device.h>
+#include <linux/pwm.h>
+
+struct pwm_lpss_chip;
+
+struct pwm_lpss_boardinfo {
+	unsigned long clk_rate;
+};
+
+extern const struct pwm_lpss_boardinfo pwm_lpss_byt_info;
+extern const struct pwm_lpss_boardinfo pwm_lpss_bsw_info;
+
+struct pwm_lpss_chip *pwm_lpss_probe(struct device *dev, struct resource *r,
+				     const struct pwm_lpss_boardinfo *info);
+int pwm_lpss_remove(struct pwm_lpss_chip *lpwm);
+
+#endif	/* __PWM_LPSS_H */
diff --git a/kernel/drivers/pwm/pwm-mxs.c b/kernel/drivers/pwm/pwm-mxs.c
new file mode 100644
index 000000000..b430811e1
--- /dev/null
+++ b/kernel/drivers/pwm/pwm-mxs.c
@@ -0,0 +1,206 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/slab.h>
+#include <linux/stmp_device.h>
+
+#define SET	0x4
+#define CLR	0x8
+#define TOG	0xc
+
+#define PWM_CTRL		0x0
+#define PWM_ACTIVE0		0x10
+#define PWM_PERIOD0		0x20
+#define  PERIOD_PERIOD(p)	((p) & 0xffff)
+#define  PERIOD_PERIOD_MAX	0x10000
+#define  PERIOD_ACTIVE_HIGH	(3 << 16)
+#define  PERIOD_INACTIVE_LOW	(2 << 18)
+#define  PERIOD_CDIV(div)	(((div) & 0x7) << 20)
+#define  PERIOD_CDIV_MAX	8
+
+static const unsigned int cdiv[PERIOD_CDIV_MAX] = {
+	1, 2, 4, 8, 16, 64, 256, 1024
+};
+
+struct mxs_pwm_chip {
+	struct pwm_chip chip;
+	struct clk *clk;
+	void __iomem *base;
+};
+
+#define to_mxs_pwm_chip(_chip) container_of(_chip, struct mxs_pwm_chip, chip)
+
+static int mxs_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+			  int duty_ns, int period_ns)
+{
+	struct mxs_pwm_chip *mxs = to_mxs_pwm_chip(chip);
+	int ret, div = 0;
+	unsigned int period_cycles, duty_cycles;
+	unsigned long rate;
+	unsigned long long c;
+
+	rate = clk_get_rate(mxs->clk);
+	while (1) {
+		c = rate / cdiv[div];
+		c = c * period_ns;
+		do_div(c, 1000000000);
+		if (c < PERIOD_PERIOD_MAX)
+			break;
+		div++;
+		if (div >= PERIOD_CDIV_MAX)
+			return -EINVAL;
+	}
+
+	period_cycles = c;
+	c *= duty_ns;
+	do_div(c, period_ns);
+	duty_cycles = c;
+
+	/*
+	 * If the PWM channel is disabled, make sure to turn on the clock
+	 * before writing the register. Otherwise, keep it enabled.
+	 */
+	if (!test_bit(PWMF_ENABLED, &pwm->flags)) {
+		ret = clk_prepare_enable(mxs->clk);
+		if (ret)
+			return ret;
+	}
+
+	writel(duty_cycles << 16,
+			mxs->base + PWM_ACTIVE0 + pwm->hwpwm * 0x20);
+	writel(PERIOD_PERIOD(period_cycles) | PERIOD_ACTIVE_HIGH |
+	       PERIOD_INACTIVE_LOW | PERIOD_CDIV(div),
+			mxs->base + PWM_PERIOD0 + pwm->hwpwm * 0x20);
+
+	/*
+	 * If the PWM is not enabled, turn the clock off again to save power.
+	 */
+	if (!test_bit(PWMF_ENABLED, &pwm->flags))
+		clk_disable_unprepare(mxs->clk);
+
+	return 0;
+}
+
+static int mxs_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct mxs_pwm_chip *mxs = to_mxs_pwm_chip(chip);
+	int ret;
+
+	ret = clk_prepare_enable(mxs->clk);
+	if (ret)
+		return ret;
+
+	writel(1 << pwm->hwpwm, mxs->base + PWM_CTRL + SET);
+
+	return 0;
+}
+
+static void mxs_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct mxs_pwm_chip *mxs = to_mxs_pwm_chip(chip);
+
+	writel(1 << pwm->hwpwm, mxs->base + PWM_CTRL + CLR);
+
+	clk_disable_unprepare(mxs->clk);
+}
+
+static const struct pwm_ops mxs_pwm_ops = {
+	.config = mxs_pwm_config,
+	.enable = mxs_pwm_enable,
+	.disable = mxs_pwm_disable,
+	.owner = THIS_MODULE,
+};
+
+static int mxs_pwm_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct mxs_pwm_chip *mxs;
+	struct resource *res;
+	int ret;
+
+	mxs = devm_kzalloc(&pdev->dev, sizeof(*mxs), GFP_KERNEL);
+	if (!mxs)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	mxs->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(mxs->base))
+		return PTR_ERR(mxs->base);
+
+	mxs->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(mxs->clk))
+		return PTR_ERR(mxs->clk);
+
+	mxs->chip.dev = &pdev->dev;
+	mxs->chip.ops = &mxs_pwm_ops;
+	mxs->chip.base = -1;
+	mxs->chip.can_sleep = true;
+	ret = of_property_read_u32(np, "fsl,pwm-number", &mxs->chip.npwm);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to get pwm number: %d\n", ret);
+		return ret;
+	}
+
+	ret = pwmchip_add(&mxs->chip);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to add pwm chip %d\n", ret);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, mxs);
+
+	ret = stmp_reset_block(mxs->base);
+	if (ret)
+		goto pwm_remove;
+
+	return 0;
+
+pwm_remove:
+	pwmchip_remove(&mxs->chip);
+	return ret;
+}
+
+static int mxs_pwm_remove(struct platform_device *pdev)
+{
+	struct mxs_pwm_chip *mxs = platform_get_drvdata(pdev);
+
+	return pwmchip_remove(&mxs->chip);
+}
+
+static const struct of_device_id mxs_pwm_dt_ids[] = {
+	{ .compatible = "fsl,imx23-pwm", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mxs_pwm_dt_ids);
+
+static struct platform_driver mxs_pwm_driver = {
+	.driver = {
+		.name = "mxs-pwm",
+		.of_match_table = mxs_pwm_dt_ids,
+	},
+	.probe = mxs_pwm_probe,
+	.remove = mxs_pwm_remove,
+};
+module_platform_driver(mxs_pwm_driver);
+
+MODULE_ALIAS("platform:mxs-pwm");
+MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>");
+MODULE_DESCRIPTION("Freescale MXS PWM Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/kernel/drivers/pwm/pwm-pca9685.c b/kernel/drivers/pwm/pwm-pca9685.c
new file mode 100644
index 000000000..34b5c275a
--- /dev/null
+++ b/kernel/drivers/pwm/pwm-pca9685.c
@@ -0,0 +1,300 @@
+/*
+ * Driver for PCA9685 16-channel 12-bit PWM LED controller
+ *
+ * Copyright (C) 2013 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ *
+ * based on the pwm-twl-led.c driver
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#define PCA9685_MODE1		0x00
+#define PCA9685_MODE2		0x01
+#define PCA9685_SUBADDR1	0x02
+#define PCA9685_SUBADDR2	0x03
+#define PCA9685_SUBADDR3	0x04
+#define PCA9685_ALLCALLADDR	0x05
+#define PCA9685_LEDX_ON_L	0x06
+#define PCA9685_LEDX_ON_H	0x07
+#define PCA9685_LEDX_OFF_L	0x08
+#define PCA9685_LEDX_OFF_H	0x09
+
+#define PCA9685_ALL_LED_ON_L	0xFA
+#define PCA9685_ALL_LED_ON_H	0xFB
+#define PCA9685_ALL_LED_OFF_L	0xFC
+#define PCA9685_ALL_LED_OFF_H	0xFD
+#define PCA9685_PRESCALE	0xFE
+
+#define PCA9685_NUMREGS		0xFF
+#define PCA9685_MAXCHAN		0x10
+
+#define LED_FULL		(1 << 4)
+#define MODE1_SLEEP		(1 << 4)
+#define MODE2_INVRT		(1 << 4)
+#define MODE2_OUTDRV		(1 << 2)
+
+#define LED_N_ON_H(N)	(PCA9685_LEDX_ON_H + (4 * (N)))
+#define LED_N_ON_L(N)	(PCA9685_LEDX_ON_L + (4 * (N)))
+#define LED_N_OFF_H(N)	(PCA9685_LEDX_OFF_H + (4 * (N)))
+#define LED_N_OFF_L(N)	(PCA9685_LEDX_OFF_L + (4 * (N)))
+
+struct pca9685 {
+	struct pwm_chip chip;
+	struct regmap *regmap;
+	int active_cnt;
+};
+
+static inline struct pca9685 *to_pca(struct pwm_chip *chip)
+{
+	return container_of(chip, struct pca9685, chip);
+}
+
+static int pca9685_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+			      int duty_ns, int period_ns)
+{
+	struct pca9685 *pca = to_pca(chip);
+	unsigned long long duty;
+	unsigned int reg;
+
+	if (duty_ns < 1) {
+		if (pwm->hwpwm >= PCA9685_MAXCHAN)
+			reg = PCA9685_ALL_LED_OFF_H;
+		else
+			reg = LED_N_OFF_H(pwm->hwpwm);
+
+		regmap_write(pca->regmap, reg, LED_FULL);
+
+		return 0;
+	}
+
+	if (duty_ns == period_ns) {
+		if (pwm->hwpwm >= PCA9685_MAXCHAN)
+			reg = PCA9685_ALL_LED_ON_H;
+		else
+			reg = LED_N_ON_H(pwm->hwpwm);
+
+		regmap_write(pca->regmap, reg, LED_FULL);
+
+		return 0;
+	}
+
+	duty = 4096 * (unsigned long long)duty_ns;
+	duty = DIV_ROUND_UP_ULL(duty, period_ns);
+
+	if (pwm->hwpwm >= PCA9685_MAXCHAN)
+		reg = PCA9685_ALL_LED_OFF_L;
+	else
+		reg = LED_N_OFF_L(pwm->hwpwm);
+
+	regmap_write(pca->regmap, reg, (int)duty & 0xff);
+
+	if (pwm->hwpwm >= PCA9685_MAXCHAN)
+		reg = PCA9685_ALL_LED_OFF_H;
+	else
+		reg = LED_N_OFF_H(pwm->hwpwm);
+
+	regmap_write(pca->regmap, reg, ((int)duty >> 8) & 0xf);
+
+	return 0;
+}
+
+static int pca9685_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct pca9685 *pca = to_pca(chip);
+	unsigned int reg;
+
+	/*
+	 * The PWM subsystem does not support a pre-delay.
+	 * So, set the ON-timeout to 0
+	 */
+	if (pwm->hwpwm >= PCA9685_MAXCHAN)
+		reg = PCA9685_ALL_LED_ON_L;
+	else
+		reg = LED_N_ON_L(pwm->hwpwm);
+
+	regmap_write(pca->regmap, reg, 0);
+
+	if (pwm->hwpwm >= PCA9685_MAXCHAN)
+		reg = PCA9685_ALL_LED_ON_H;
+	else
+		reg = LED_N_ON_H(pwm->hwpwm);
+
+	regmap_write(pca->regmap, reg, 0);
+
+	/*
+	 * Clear the full-off bit.
+	 * It has precedence over the others and must be off.
+	 */
+	if (pwm->hwpwm >= PCA9685_MAXCHAN)
+		reg = PCA9685_ALL_LED_OFF_H;
+	else
+		reg = LED_N_OFF_H(pwm->hwpwm);
+
+	regmap_update_bits(pca->regmap, reg, LED_FULL, 0x0);
+
+	return 0;
+}
+
+static void pca9685_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct pca9685 *pca = to_pca(chip);
+	unsigned int reg;
+
+	if (pwm->hwpwm >= PCA9685_MAXCHAN)
+		reg = PCA9685_ALL_LED_OFF_H;
+	else
+		reg = LED_N_OFF_H(pwm->hwpwm);
+
+	regmap_write(pca->regmap, reg, LED_FULL);
+
+	/* Clear the LED_OFF counter. */
+	if (pwm->hwpwm >= PCA9685_MAXCHAN)
+		reg = PCA9685_ALL_LED_OFF_L;
+	else
+		reg = LED_N_OFF_L(pwm->hwpwm);
+
+	regmap_write(pca->regmap, reg, 0x0);
+}
+
+static int pca9685_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct pca9685 *pca = to_pca(chip);
+
+	if (pca->active_cnt++ == 0)
+		return regmap_update_bits(pca->regmap, PCA9685_MODE1,
+					  MODE1_SLEEP, 0x0);
+
+	return 0;
+}
+
+static void pca9685_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct pca9685 *pca = to_pca(chip);
+
+	if (--pca->active_cnt == 0)
+		regmap_update_bits(pca->regmap, PCA9685_MODE1, MODE1_SLEEP,
+				   MODE1_SLEEP);
+}
+
+static const struct pwm_ops pca9685_pwm_ops = {
+	.enable = pca9685_pwm_enable,
+	.disable = pca9685_pwm_disable,
+	.config = pca9685_pwm_config,
+	.request = pca9685_pwm_request,
+	.free = pca9685_pwm_free,
+	.owner = THIS_MODULE,
+};
+
+static const struct regmap_config pca9685_regmap_i2c_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = PCA9685_NUMREGS,
+	.cache_type = REGCACHE_NONE,
+};
+
+static int pca9685_pwm_probe(struct i2c_client *client,
+				const struct i2c_device_id *id)
+{
+	struct device_node *np = client->dev.of_node;
+	struct pca9685 *pca;
+	int ret;
+	int mode2;
+
+	pca = devm_kzalloc(&client->dev, sizeof(*pca), GFP_KERNEL);
+	if (!pca)
+		return -ENOMEM;
+
+	pca->regmap = devm_regmap_init_i2c(client, &pca9685_regmap_i2c_config);
+	if (IS_ERR(pca->regmap)) {
+		ret = PTR_ERR(pca->regmap);
+		dev_err(&client->dev, "Failed to initialize register map: %d\n",
+			ret);
+		return ret;
+	}
+
+	i2c_set_clientdata(client, pca);
+
+	regmap_read(pca->regmap, PCA9685_MODE2, &mode2);
+
+	if (of_property_read_bool(np, "invert"))
+		mode2 |= MODE2_INVRT;
+	else
+		mode2 &= ~MODE2_INVRT;
+
+	if (of_property_read_bool(np, "open-drain"))
+		mode2 &= ~MODE2_OUTDRV;
+	else
+		mode2 |= MODE2_OUTDRV;
+
+	regmap_write(pca->regmap, PCA9685_MODE2, mode2);
+
+	/* clear all "full off" bits */
+	regmap_write(pca->regmap, PCA9685_ALL_LED_OFF_L, 0);
+	regmap_write(pca->regmap, PCA9685_ALL_LED_OFF_H, 0);
+
+	pca->chip.ops = &pca9685_pwm_ops;
+	/* add an extra channel for ALL_LED */
+	pca->chip.npwm = PCA9685_MAXCHAN + 1;
+
+	pca->chip.dev = &client->dev;
+	pca->chip.base = -1;
+	pca->chip.can_sleep = true;
+
+	return pwmchip_add(&pca->chip);
+}
+
+static int pca9685_pwm_remove(struct i2c_client *client)
+{
+	struct pca9685 *pca = i2c_get_clientdata(client);
+
+	regmap_update_bits(pca->regmap, PCA9685_MODE1, MODE1_SLEEP,
+			   MODE1_SLEEP);
+
+	return pwmchip_remove(&pca->chip);
+}
+
+static const struct i2c_device_id pca9685_id[] = {
+	{ "pca9685", 0 },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(i2c, pca9685_id);
+
+static const struct of_device_id pca9685_dt_ids[] = {
+	{ .compatible = "nxp,pca9685-pwm", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, pca9685_dt_ids);
+
+static struct i2c_driver pca9685_i2c_driver = {
+	.driver = {
+		.name = "pca9685-pwm",
+		.owner = THIS_MODULE,
+		.of_match_table = pca9685_dt_ids,
+	},
+	.probe = pca9685_pwm_probe,
+	.remove = pca9685_pwm_remove,
+	.id_table = pca9685_id,
+};
+
+module_i2c_driver(pca9685_i2c_driver);
+
+MODULE_AUTHOR("Steffen Trumtrar <s.trumtrar@pengutronix.de>");
+MODULE_DESCRIPTION("PWM driver for PCA9685");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/pwm/pwm-puv3.c b/kernel/drivers/pwm/pwm-puv3.c
new file mode 100644
index 000000000..ed6007b27
--- /dev/null
+++ b/kernel/drivers/pwm/pwm-puv3.c
@@ -0,0 +1,155 @@
+/*
+ * linux/arch/unicore32/kernel/pwm.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ *	Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
+ *	Copyright (C) 2001-2010 Guan Xuetao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/pwm.h>
+
+#include <asm/div64.h>
+#include <mach/hardware.h>
+
+struct puv3_pwm_chip {
+	struct pwm_chip chip;
+	void __iomem *base;
+	struct clk *clk;
+};
+
+static inline struct puv3_pwm_chip *to_puv3(struct pwm_chip *chip)
+{
+	return container_of(chip, struct puv3_pwm_chip, chip);
+}
+
+/*
+ * period_ns = 10^9 * (PRESCALE + 1) * (PV + 1) / PWM_CLK_RATE
+ * duty_ns   = 10^9 * (PRESCALE + 1) * DC / PWM_CLK_RATE
+ */
+static int puv3_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+			   int duty_ns, int period_ns)
+{
+	unsigned long period_cycles, prescale, pv, dc;
+	struct puv3_pwm_chip *puv3 = to_puv3(chip);
+	unsigned long long c;
+
+	c = clk_get_rate(puv3->clk);
+	c = c * period_ns;
+	do_div(c, 1000000000);
+	period_cycles = c;
+
+	if (period_cycles < 1)
+		period_cycles = 1;
+
+	prescale = (period_cycles - 1) / 1024;
+	pv = period_cycles / (prescale + 1) - 1;
+
+	if (prescale > 63)
+		return -EINVAL;
+
+	if (duty_ns == period_ns)
+		dc = OST_PWMDCCR_FDCYCLE;
+	else
+		dc = (pv + 1) * duty_ns / period_ns;
+
+	/*
+	 * NOTE: the clock to PWM has to be enabled first
+	 * before writing to the registers
+	 */
+	clk_prepare_enable(puv3->clk);
+
+	writel(prescale, puv3->base + OST_PWM_PWCR);
+	writel(pv - dc, puv3->base + OST_PWM_DCCR);
+	writel(pv, puv3->base + OST_PWM_PCR);
+
+	clk_disable_unprepare(puv3->clk);
+
+	return 0;
+}
+
+static int puv3_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct puv3_pwm_chip *puv3 = to_puv3(chip);
+
+	return clk_prepare_enable(puv3->clk);
+}
+
+static void puv3_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct puv3_pwm_chip *puv3 = to_puv3(chip);
+
+	clk_disable_unprepare(puv3->clk);
+}
+
+static const struct pwm_ops puv3_pwm_ops = {
+	.config = puv3_pwm_config,
+	.enable = puv3_pwm_enable,
+	.disable = puv3_pwm_disable,
+	.owner = THIS_MODULE,
+};
+
+static int pwm_probe(struct platform_device *pdev)
+{
+	struct puv3_pwm_chip *puv3;
+	struct resource *r;
+	int ret;
+
+	puv3 = devm_kzalloc(&pdev->dev, sizeof(*puv3), GFP_KERNEL);
+	if (puv3 == NULL) {
+		dev_err(&pdev->dev, "failed to allocate memory\n");
+		return -ENOMEM;
+	}
+
+	puv3->clk = devm_clk_get(&pdev->dev, "OST_CLK");
+	if (IS_ERR(puv3->clk))
+		return PTR_ERR(puv3->clk);
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	puv3->base = devm_ioremap_resource(&pdev->dev, r);
+	if (IS_ERR(puv3->base))
+		return PTR_ERR(puv3->base);
+
+	puv3->chip.dev = &pdev->dev;
+	puv3->chip.ops = &puv3_pwm_ops;
+	puv3->chip.base = -1;
+	puv3->chip.npwm = 1;
+
+	ret = pwmchip_add(&puv3->chip);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, puv3);
+	return 0;
+}
+
+static int pwm_remove(struct platform_device *pdev)
+{
+	struct puv3_pwm_chip *puv3 = platform_get_drvdata(pdev);
+
+	return pwmchip_remove(&puv3->chip);
+}
+
+static struct platform_driver puv3_pwm_driver = {
+	.driver = {
+		.name = "PKUnity-v3-PWM",
+	},
+	.probe = pwm_probe,
+	.remove = pwm_remove,
+};
+module_platform_driver(puv3_pwm_driver);
+
+MODULE_LICENSE("GPL v2");
diff --git a/kernel/drivers/pwm/pwm-pxa.c b/kernel/drivers/pwm/pwm-pxa.c
new file mode 100644
index 000000000..cb2f7024c
--- /dev/null
+++ b/kernel/drivers/pwm/pwm-pxa.c
@@ -0,0 +1,237 @@
+/*
+ * drivers/pwm/pwm-pxa.c
+ *
+ * simple driver for PWM (Pulse Width Modulator) controller
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * 2008-02-13	initial version
+ *		eric miao <eric.miao@marvell.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/pwm.h>
+#include <linux/of_device.h>
+
+#include <asm/div64.h>
+
+#define HAS_SECONDARY_PWM	0x10
+
+static const struct platform_device_id pwm_id_table[] = {
+	/*   PWM    has_secondary_pwm? */
+	{ "pxa25x-pwm", 0 },
+	{ "pxa27x-pwm", HAS_SECONDARY_PWM },
+	{ "pxa168-pwm", 0 },
+	{ "pxa910-pwm", 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(platform, pwm_id_table);
+
+/* PWM registers and bits definitions */
+#define PWMCR		(0x00)
+#define PWMDCR		(0x04)
+#define PWMPCR		(0x08)
+
+#define PWMCR_SD	(1 << 6)
+#define PWMDCR_FD	(1 << 10)
+
+struct pxa_pwm_chip {
+	struct pwm_chip	chip;
+	struct device	*dev;
+
+	struct clk	*clk;
+	void __iomem	*mmio_base;
+};
+
+static inline struct pxa_pwm_chip *to_pxa_pwm_chip(struct pwm_chip *chip)
+{
+	return container_of(chip, struct pxa_pwm_chip, chip);
+}
+
+/*
+ * period_ns = 10^9 * (PRESCALE + 1) * (PV + 1) / PWM_CLK_RATE
+ * duty_ns   = 10^9 * (PRESCALE + 1) * DC / PWM_CLK_RATE
+ */
+static int pxa_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+			  int duty_ns, int period_ns)
+{
+	struct pxa_pwm_chip *pc = to_pxa_pwm_chip(chip);
+	unsigned long long c;
+	unsigned long period_cycles, prescale, pv, dc;
+	unsigned long offset;
+	int rc;
+
+	offset = pwm->hwpwm ? 0x10 : 0;
+
+	c = clk_get_rate(pc->clk);
+	c = c * period_ns;
+	do_div(c, 1000000000);
+	period_cycles = c;
+
+	if (period_cycles < 1)
+		period_cycles = 1;
+	prescale = (period_cycles - 1) / 1024;
+	pv = period_cycles / (prescale + 1) - 1;
+
+	if (prescale > 63)
+		return -EINVAL;
+
+	if (duty_ns == period_ns)
+		dc = PWMDCR_FD;
+	else
+		dc = (pv + 1) * duty_ns / period_ns;
+
+	/* NOTE: the clock to PWM has to be enabled first
+	 * before writing to the registers
+	 */
+	rc = clk_prepare_enable(pc->clk);
+	if (rc < 0)
+		return rc;
+
+	writel(prescale, pc->mmio_base + offset + PWMCR);
+	writel(dc, pc->mmio_base + offset + PWMDCR);
+	writel(pv, pc->mmio_base + offset + PWMPCR);
+
+	clk_disable_unprepare(pc->clk);
+	return 0;
+}
+
+static int pxa_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct pxa_pwm_chip *pc = to_pxa_pwm_chip(chip);
+
+	return clk_prepare_enable(pc->clk);
+}
+
+static void pxa_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct pxa_pwm_chip *pc = to_pxa_pwm_chip(chip);
+
+	clk_disable_unprepare(pc->clk);
+}
+
+static struct pwm_ops pxa_pwm_ops = {
+	.config = pxa_pwm_config,
+	.enable = pxa_pwm_enable,
+	.disable = pxa_pwm_disable,
+	.owner = THIS_MODULE,
+};
+
+#ifdef CONFIG_OF
+/*
+ * Device tree users must create one device instance for each PWM channel.
+ * Hence we dispense with the HAS_SECONDARY_PWM and "tell" the original driver
+ * code that this is a single channel pxa25x-pwm.  Currently all devices are
+ * supported identically.
+ */
+static const struct of_device_id pwm_of_match[] = {
+	{ .compatible = "marvell,pxa250-pwm", .data = &pwm_id_table[0]},
+	{ .compatible = "marvell,pxa270-pwm", .data = &pwm_id_table[0]},
+	{ .compatible = "marvell,pxa168-pwm", .data = &pwm_id_table[0]},
+	{ .compatible = "marvell,pxa910-pwm", .data = &pwm_id_table[0]},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, pwm_of_match);
+#else
+#define pwm_of_match NULL
+#endif
+
+static const struct platform_device_id *pxa_pwm_get_id_dt(struct device *dev)
+{
+	const struct of_device_id *id = of_match_device(pwm_of_match, dev);
+
+	return id ? id->data : NULL;
+}
+
+static struct pwm_device *
+pxa_pwm_of_xlate(struct pwm_chip *pc, const struct of_phandle_args *args)
+{
+	struct pwm_device *pwm;
+
+	pwm = pwm_request_from_chip(pc, 0, NULL);
+	if (IS_ERR(pwm))
+		return pwm;
+
+	pwm_set_period(pwm, args->args[0]);
+
+	return pwm;
+}
+
+static int pwm_probe(struct platform_device *pdev)
+{
+	const struct platform_device_id *id = platform_get_device_id(pdev);
+	struct pxa_pwm_chip *pwm;
+	struct resource *r;
+	int ret = 0;
+
+	if (IS_ENABLED(CONFIG_OF) && id == NULL)
+		id = pxa_pwm_get_id_dt(&pdev->dev);
+
+	if (id == NULL)
+		return -EINVAL;
+
+	pwm = devm_kzalloc(&pdev->dev, sizeof(*pwm), GFP_KERNEL);
+	if (pwm == NULL)
+		return -ENOMEM;
+
+	pwm->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(pwm->clk))
+		return PTR_ERR(pwm->clk);
+
+	pwm->chip.dev = &pdev->dev;
+	pwm->chip.ops = &pxa_pwm_ops;
+	pwm->chip.base = -1;
+	pwm->chip.npwm = (id->driver_data & HAS_SECONDARY_PWM) ? 2 : 1;
+
+	if (IS_ENABLED(CONFIG_OF)) {
+		pwm->chip.of_xlate = pxa_pwm_of_xlate;
+		pwm->chip.of_pwm_n_cells = 1;
+	}
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	pwm->mmio_base = devm_ioremap_resource(&pdev->dev, r);
+	if (IS_ERR(pwm->mmio_base))
+		return PTR_ERR(pwm->mmio_base);
+
+	ret = pwmchip_add(&pwm->chip);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, pwm);
+	return 0;
+}
+
+static int pwm_remove(struct platform_device *pdev)
+{
+	struct pxa_pwm_chip *chip;
+
+	chip = platform_get_drvdata(pdev);
+	if (chip == NULL)
+		return -ENODEV;
+
+	return pwmchip_remove(&chip->chip);
+}
+
+static struct platform_driver pwm_driver = {
+	.driver		= {
+		.name	= "pxa25x-pwm",
+		.of_match_table = pwm_of_match,
+	},
+	.probe		= pwm_probe,
+	.remove		= pwm_remove,
+	.id_table	= pwm_id_table,
+};
+
+module_platform_driver(pwm_driver);
+
+MODULE_LICENSE("GPL v2");
diff --git a/kernel/drivers/pwm/pwm-renesas-tpu.c b/kernel/drivers/pwm/pwm-renesas-tpu.c
new file mode 100644
index 000000000..ee63f9e9d
--- /dev/null
+++ b/kernel/drivers/pwm/pwm-renesas-tpu.c
@@ -0,0 +1,480 @@
+/*
+ * R-Mobile TPU PWM driver
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/pwm.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#define TPU_CHANNEL_MAX		4
+
+#define TPU_TSTR		0x00	/* Timer start register (shared) */
+
+#define TPU_TCRn		0x00	/* Timer control register */
+#define TPU_TCR_CCLR_NONE	(0 << 5)
+#define TPU_TCR_CCLR_TGRA	(1 << 5)
+#define TPU_TCR_CCLR_TGRB	(2 << 5)
+#define TPU_TCR_CCLR_TGRC	(5 << 5)
+#define TPU_TCR_CCLR_TGRD	(6 << 5)
+#define TPU_TCR_CKEG_RISING	(0 << 3)
+#define TPU_TCR_CKEG_FALLING	(1 << 3)
+#define TPU_TCR_CKEG_BOTH	(2 << 3)
+#define TPU_TMDRn		0x04	/* Timer mode register */
+#define TPU_TMDR_BFWT		(1 << 6)
+#define TPU_TMDR_BFB		(1 << 5)
+#define TPU_TMDR_BFA		(1 << 4)
+#define TPU_TMDR_MD_NORMAL	(0 << 0)
+#define TPU_TMDR_MD_PWM		(2 << 0)
+#define TPU_TIORn		0x08	/* Timer I/O control register */
+#define TPU_TIOR_IOA_0		(0 << 0)
+#define TPU_TIOR_IOA_0_CLR	(1 << 0)
+#define TPU_TIOR_IOA_0_SET	(2 << 0)
+#define TPU_TIOR_IOA_0_TOGGLE	(3 << 0)
+#define TPU_TIOR_IOA_1		(4 << 0)
+#define TPU_TIOR_IOA_1_CLR	(5 << 0)
+#define TPU_TIOR_IOA_1_SET	(6 << 0)
+#define TPU_TIOR_IOA_1_TOGGLE	(7 << 0)
+#define TPU_TIERn		0x0c	/* Timer interrupt enable register */
+#define TPU_TSRn		0x10	/* Timer status register */
+#define TPU_TCNTn		0x14	/* Timer counter */
+#define TPU_TGRAn		0x18	/* Timer general register A */
+#define TPU_TGRBn		0x1c	/* Timer general register B */
+#define TPU_TGRCn		0x20	/* Timer general register C */
+#define TPU_TGRDn		0x24	/* Timer general register D */
+
+#define TPU_CHANNEL_OFFSET	0x10
+#define TPU_CHANNEL_SIZE	0x40
+
+enum tpu_pin_state {
+	TPU_PIN_INACTIVE,		/* Pin is driven inactive */
+	TPU_PIN_PWM,			/* Pin is driven by PWM */
+	TPU_PIN_ACTIVE,			/* Pin is driven active */
+};
+
+struct tpu_device;
+
+struct tpu_pwm_device {
+	bool timer_on;			/* Whether the timer is running */
+
+	struct tpu_device *tpu;
+	unsigned int channel;		/* Channel number in the TPU */
+
+	enum pwm_polarity polarity;
+	unsigned int prescaler;
+	u16 period;
+	u16 duty;
+};
+
+struct tpu_device {
+	struct platform_device *pdev;
+	struct pwm_chip chip;
+	spinlock_t lock;
+
+	void __iomem *base;
+	struct clk *clk;
+};
+
+#define to_tpu_device(c)	container_of(c, struct tpu_device, chip)
+
+static void tpu_pwm_write(struct tpu_pwm_device *pwm, int reg_nr, u16 value)
+{
+	void __iomem *base = pwm->tpu->base + TPU_CHANNEL_OFFSET
+			   + pwm->channel * TPU_CHANNEL_SIZE;
+
+	iowrite16(value, base + reg_nr);
+}
+
+static void tpu_pwm_set_pin(struct tpu_pwm_device *pwm,
+			    enum tpu_pin_state state)
+{
+	static const char * const states[] = { "inactive", "PWM", "active" };
+
+	dev_dbg(&pwm->tpu->pdev->dev, "%u: configuring pin as %s\n",
+		pwm->channel, states[state]);
+
+	switch (state) {
+	case TPU_PIN_INACTIVE:
+		tpu_pwm_write(pwm, TPU_TIORn,
+			      pwm->polarity == PWM_POLARITY_INVERSED ?
+			      TPU_TIOR_IOA_1 : TPU_TIOR_IOA_0);
+		break;
+	case TPU_PIN_PWM:
+		tpu_pwm_write(pwm, TPU_TIORn,
+			      pwm->polarity == PWM_POLARITY_INVERSED ?
+			      TPU_TIOR_IOA_0_SET : TPU_TIOR_IOA_1_CLR);
+		break;
+	case TPU_PIN_ACTIVE:
+		tpu_pwm_write(pwm, TPU_TIORn,
+			      pwm->polarity == PWM_POLARITY_INVERSED ?
+			      TPU_TIOR_IOA_0 : TPU_TIOR_IOA_1);
+		break;
+	}
+}
+
+static void tpu_pwm_start_stop(struct tpu_pwm_device *pwm, int start)
+{
+	unsigned long flags;
+	u16 value;
+
+	spin_lock_irqsave(&pwm->tpu->lock, flags);
+	value = ioread16(pwm->tpu->base + TPU_TSTR);
+
+	if (start)
+		value |= 1 << pwm->channel;
+	else
+		value &= ~(1 << pwm->channel);
+
+	iowrite16(value, pwm->tpu->base + TPU_TSTR);
+	spin_unlock_irqrestore(&pwm->tpu->lock, flags);
+}
+
+static int tpu_pwm_timer_start(struct tpu_pwm_device *pwm)
+{
+	int ret;
+
+	if (!pwm->timer_on) {
+		/* Wake up device and enable clock. */
+		pm_runtime_get_sync(&pwm->tpu->pdev->dev);
+		ret = clk_prepare_enable(pwm->tpu->clk);
+		if (ret) {
+			dev_err(&pwm->tpu->pdev->dev, "cannot enable clock\n");
+			return ret;
+		}
+		pwm->timer_on = true;
+	}
+
+	/*
+	 * Make sure the channel is stopped, as we need to reconfigure it
+	 * completely. First drive the pin to the inactive state to avoid
+	 * glitches.
+	 */
+	tpu_pwm_set_pin(pwm, TPU_PIN_INACTIVE);
+	tpu_pwm_start_stop(pwm, false);
+
+	/*
+	 * - Clear TCNT on TGRB match
+	 * - Count on rising edge
+	 * - Set prescaler
+	 * - Output 0 until TGRA, output 1 until TGRB (active low polarity)
+	 * - Output 1 until TGRA, output 0 until TGRB (active high polarity
+	 * - PWM mode
+	 */
+	tpu_pwm_write(pwm, TPU_TCRn, TPU_TCR_CCLR_TGRB | TPU_TCR_CKEG_RISING |
+		      pwm->prescaler);
+	tpu_pwm_write(pwm, TPU_TMDRn, TPU_TMDR_MD_PWM);
+	tpu_pwm_set_pin(pwm, TPU_PIN_PWM);
+	tpu_pwm_write(pwm, TPU_TGRAn, pwm->duty);
+	tpu_pwm_write(pwm, TPU_TGRBn, pwm->period);
+
+	dev_dbg(&pwm->tpu->pdev->dev, "%u: TGRA 0x%04x TGRB 0x%04x\n",
+		pwm->channel, pwm->duty, pwm->period);
+
+	/* Start the channel. */
+	tpu_pwm_start_stop(pwm, true);
+
+	return 0;
+}
+
+static void tpu_pwm_timer_stop(struct tpu_pwm_device *pwm)
+{
+	if (!pwm->timer_on)
+		return;
+
+	/* Disable channel. */
+	tpu_pwm_start_stop(pwm, false);
+
+	/* Stop clock and mark device as idle. */
+	clk_disable_unprepare(pwm->tpu->clk);
+	pm_runtime_put(&pwm->tpu->pdev->dev);
+
+	pwm->timer_on = false;
+}
+
+/* -----------------------------------------------------------------------------
+ * PWM API
+ */
+
+static int tpu_pwm_request(struct pwm_chip *chip, struct pwm_device *_pwm)
+{
+	struct tpu_device *tpu = to_tpu_device(chip);
+	struct tpu_pwm_device *pwm;
+
+	if (_pwm->hwpwm >= TPU_CHANNEL_MAX)
+		return -EINVAL;
+
+	pwm = kzalloc(sizeof(*pwm), GFP_KERNEL);
+	if (pwm == NULL)
+		return -ENOMEM;
+
+	pwm->tpu = tpu;
+	pwm->channel = _pwm->hwpwm;
+	pwm->polarity = PWM_POLARITY_NORMAL;
+	pwm->prescaler = 0;
+	pwm->period = 0;
+	pwm->duty = 0;
+
+	pwm->timer_on = false;
+
+	pwm_set_chip_data(_pwm, pwm);
+
+	return 0;
+}
+
+static void tpu_pwm_free(struct pwm_chip *chip, struct pwm_device *_pwm)
+{
+	struct tpu_pwm_device *pwm = pwm_get_chip_data(_pwm);
+
+	tpu_pwm_timer_stop(pwm);
+	kfree(pwm);
+}
+
+static int tpu_pwm_config(struct pwm_chip *chip, struct pwm_device *_pwm,
+			  int duty_ns, int period_ns)
+{
+	static const unsigned int prescalers[] = { 1, 4, 16, 64 };
+	struct tpu_pwm_device *pwm = pwm_get_chip_data(_pwm);
+	struct tpu_device *tpu = to_tpu_device(chip);
+	unsigned int prescaler;
+	bool duty_only = false;
+	u32 clk_rate;
+	u32 period;
+	u32 duty;
+	int ret;
+
+	/*
+	 * Pick a prescaler to avoid overflowing the counter.
+	 * TODO: Pick the highest acceptable prescaler.
+	 */
+	clk_rate = clk_get_rate(tpu->clk);
+
+	for (prescaler = 0; prescaler < ARRAY_SIZE(prescalers); ++prescaler) {
+		period = clk_rate / prescalers[prescaler]
+		       / (NSEC_PER_SEC / period_ns);
+		if (period <= 0xffff)
+			break;
+	}
+
+	if (prescaler == ARRAY_SIZE(prescalers) || period == 0) {
+		dev_err(&tpu->pdev->dev, "clock rate mismatch\n");
+		return -ENOTSUPP;
+	}
+
+	if (duty_ns) {
+		duty = clk_rate / prescalers[prescaler]
+		     / (NSEC_PER_SEC / duty_ns);
+		if (duty > period)
+			return -EINVAL;
+	} else {
+		duty = 0;
+	}
+
+	dev_dbg(&tpu->pdev->dev,
+		"rate %u, prescaler %u, period %u, duty %u\n",
+		clk_rate, prescalers[prescaler], period, duty);
+
+	if (pwm->prescaler == prescaler && pwm->period == period)
+		duty_only = true;
+
+	pwm->prescaler = prescaler;
+	pwm->period = period;
+	pwm->duty = duty;
+
+	/* If the channel is disabled we're done. */
+	if (!test_bit(PWMF_ENABLED, &_pwm->flags))
+		return 0;
+
+	if (duty_only && pwm->timer_on) {
+		/*
+		 * If only the duty cycle changed and the timer is already
+		 * running, there's no need to reconfigure it completely, Just
+		 * modify the duty cycle.
+		 */
+		tpu_pwm_write(pwm, TPU_TGRAn, pwm->duty);
+		dev_dbg(&tpu->pdev->dev, "%u: TGRA 0x%04x\n", pwm->channel,
+			pwm->duty);
+	} else {
+		/* Otherwise perform a full reconfiguration. */
+		ret = tpu_pwm_timer_start(pwm);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (duty == 0 || duty == period) {
+		/*
+		 * To avoid running the timer when not strictly required, handle
+		 * 0% and 100% duty cycles as fixed levels and stop the timer.
+		 */
+		tpu_pwm_set_pin(pwm, duty ? TPU_PIN_ACTIVE : TPU_PIN_INACTIVE);
+		tpu_pwm_timer_stop(pwm);
+	}
+
+	return 0;
+}
+
+static int tpu_pwm_set_polarity(struct pwm_chip *chip, struct pwm_device *_pwm,
+				enum pwm_polarity polarity)
+{
+	struct tpu_pwm_device *pwm = pwm_get_chip_data(_pwm);
+
+	pwm->polarity = polarity;
+
+	return 0;
+}
+
+static int tpu_pwm_enable(struct pwm_chip *chip, struct pwm_device *_pwm)
+{
+	struct tpu_pwm_device *pwm = pwm_get_chip_data(_pwm);
+	int ret;
+
+	ret = tpu_pwm_timer_start(pwm);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * To avoid running the timer when not strictly required, handle 0% and
+	 * 100% duty cycles as fixed levels and stop the timer.
+	 */
+	if (pwm->duty == 0 || pwm->duty == pwm->period) {
+		tpu_pwm_set_pin(pwm, pwm->duty ?
+				TPU_PIN_ACTIVE : TPU_PIN_INACTIVE);
+		tpu_pwm_timer_stop(pwm);
+	}
+
+	return 0;
+}
+
+static void tpu_pwm_disable(struct pwm_chip *chip, struct pwm_device *_pwm)
+{
+	struct tpu_pwm_device *pwm = pwm_get_chip_data(_pwm);
+
+	/* The timer must be running to modify the pin output configuration. */
+	tpu_pwm_timer_start(pwm);
+	tpu_pwm_set_pin(pwm, TPU_PIN_INACTIVE);
+	tpu_pwm_timer_stop(pwm);
+}
+
+static const struct pwm_ops tpu_pwm_ops = {
+	.request = tpu_pwm_request,
+	.free = tpu_pwm_free,
+	.config = tpu_pwm_config,
+	.set_polarity = tpu_pwm_set_polarity,
+	.enable = tpu_pwm_enable,
+	.disable = tpu_pwm_disable,
+	.owner = THIS_MODULE,
+};
+
+/* -----------------------------------------------------------------------------
+ * Probe and remove
+ */
+
+static int tpu_probe(struct platform_device *pdev)
+{
+	struct tpu_device *tpu;
+	struct resource *res;
+	int ret;
+
+	tpu = devm_kzalloc(&pdev->dev, sizeof(*tpu), GFP_KERNEL);
+	if (tpu == NULL)
+		return -ENOMEM;
+
+	spin_lock_init(&tpu->lock);
+	tpu->pdev = pdev;
+
+	/* Map memory, get clock and pin control. */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	tpu->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(tpu->base))
+		return PTR_ERR(tpu->base);
+
+	tpu->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(tpu->clk)) {
+		dev_err(&pdev->dev, "cannot get clock\n");
+		return PTR_ERR(tpu->clk);
+	}
+
+	/* Initialize and register the device. */
+	platform_set_drvdata(pdev, tpu);
+
+	tpu->chip.dev = &pdev->dev;
+	tpu->chip.ops = &tpu_pwm_ops;
+	tpu->chip.of_xlate = of_pwm_xlate_with_flags;
+	tpu->chip.of_pwm_n_cells = 3;
+	tpu->chip.base = -1;
+	tpu->chip.npwm = TPU_CHANNEL_MAX;
+
+	ret = pwmchip_add(&tpu->chip);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to register PWM chip\n");
+		return ret;
+	}
+
+	dev_info(&pdev->dev, "TPU PWM %d registered\n", tpu->pdev->id);
+
+	pm_runtime_enable(&pdev->dev);
+
+	return 0;
+}
+
+static int tpu_remove(struct platform_device *pdev)
+{
+	struct tpu_device *tpu = platform_get_drvdata(pdev);
+	int ret;
+
+	ret = pwmchip_remove(&tpu->chip);
+	if (ret)
+		return ret;
+
+	pm_runtime_disable(&pdev->dev);
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id tpu_of_table[] = {
+	{ .compatible = "renesas,tpu-r8a73a4", },
+	{ .compatible = "renesas,tpu-r8a7740", },
+	{ .compatible = "renesas,tpu-r8a7790", },
+	{ .compatible = "renesas,tpu-sh7372", },
+	{ .compatible = "renesas,tpu", },
+	{ },
+};
+
+MODULE_DEVICE_TABLE(of, tpu_of_table);
+#endif
+
+static struct platform_driver tpu_driver = {
+	.probe		= tpu_probe,
+	.remove		= tpu_remove,
+	.driver		= {
+		.name	= "renesas-tpu-pwm",
+		.of_match_table = of_match_ptr(tpu_of_table),
+	}
+};
+
+module_platform_driver(tpu_driver);
+
+MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>");
+MODULE_DESCRIPTION("Renesas TPU PWM Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:renesas-tpu-pwm");
diff --git a/kernel/drivers/pwm/pwm-rockchip.c b/kernel/drivers/pwm/pwm-rockchip.c
new file mode 100644
index 000000000..9442df244
--- /dev/null
+++ b/kernel/drivers/pwm/pwm-rockchip.c
@@ -0,0 +1,303 @@
+/*
+ * PWM driver for Rockchip SoCs
+ *
+ * Copyright (C) 2014 Beniamino Galvani <b.galvani@gmail.com>
+ * Copyright (C) 2014 ROCKCHIP, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/time.h>
+
+#define PWM_CTRL_TIMER_EN	(1 << 0)
+#define PWM_CTRL_OUTPUT_EN	(1 << 3)
+
+#define PWM_ENABLE		(1 << 0)
+#define PWM_CONTINUOUS		(1 << 1)
+#define PWM_DUTY_POSITIVE	(1 << 3)
+#define PWM_DUTY_NEGATIVE	(0 << 3)
+#define PWM_INACTIVE_NEGATIVE	(0 << 4)
+#define PWM_INACTIVE_POSITIVE	(1 << 4)
+#define PWM_OUTPUT_LEFT		(0 << 5)
+#define PWM_LP_DISABLE		(0 << 8)
+
+struct rockchip_pwm_chip {
+	struct pwm_chip chip;
+	struct clk *clk;
+	const struct rockchip_pwm_data *data;
+	void __iomem *base;
+};
+
+struct rockchip_pwm_regs {
+	unsigned long duty;
+	unsigned long period;
+	unsigned long cntr;
+	unsigned long ctrl;
+};
+
+struct rockchip_pwm_data {
+	struct rockchip_pwm_regs regs;
+	unsigned int prescaler;
+	const struct pwm_ops *ops;
+
+	void (*set_enable)(struct pwm_chip *chip,
+			   struct pwm_device *pwm, bool enable);
+};
+
+static inline struct rockchip_pwm_chip *to_rockchip_pwm_chip(struct pwm_chip *c)
+{
+	return container_of(c, struct rockchip_pwm_chip, chip);
+}
+
+static void rockchip_pwm_set_enable_v1(struct pwm_chip *chip,
+				       struct pwm_device *pwm, bool enable)
+{
+	struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip);
+	u32 enable_conf = PWM_CTRL_OUTPUT_EN | PWM_CTRL_TIMER_EN;
+	u32 val;
+
+	val = readl_relaxed(pc->base + pc->data->regs.ctrl);
+
+	if (enable)
+		val |= enable_conf;
+	else
+		val &= ~enable_conf;
+
+	writel_relaxed(val, pc->base + pc->data->regs.ctrl);
+}
+
+static void rockchip_pwm_set_enable_v2(struct pwm_chip *chip,
+				       struct pwm_device *pwm, bool enable)
+{
+	struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip);
+	u32 enable_conf = PWM_OUTPUT_LEFT | PWM_LP_DISABLE | PWM_ENABLE |
+			  PWM_CONTINUOUS;
+	u32 val;
+
+	if (pwm->polarity == PWM_POLARITY_INVERSED)
+		enable_conf |= PWM_DUTY_NEGATIVE | PWM_INACTIVE_POSITIVE;
+	else
+		enable_conf |= PWM_DUTY_POSITIVE | PWM_INACTIVE_NEGATIVE;
+
+	val = readl_relaxed(pc->base + pc->data->regs.ctrl);
+
+	if (enable)
+		val |= enable_conf;
+	else
+		val &= ~enable_conf;
+
+	writel_relaxed(val, pc->base + pc->data->regs.ctrl);
+}
+
+static int rockchip_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+			       int duty_ns, int period_ns)
+{
+	struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip);
+	unsigned long period, duty;
+	u64 clk_rate, div;
+	int ret;
+
+	clk_rate = clk_get_rate(pc->clk);
+
+	/*
+	 * Since period and duty cycle registers have a width of 32
+	 * bits, every possible input period can be obtained using the
+	 * default prescaler value for all practical clock rate values.
+	 */
+	div = clk_rate * period_ns;
+	do_div(div, pc->data->prescaler * NSEC_PER_SEC);
+	period = div;
+
+	div = clk_rate * duty_ns;
+	do_div(div, pc->data->prescaler * NSEC_PER_SEC);
+	duty = div;
+
+	ret = clk_enable(pc->clk);
+	if (ret)
+		return ret;
+
+	writel(period, pc->base + pc->data->regs.period);
+	writel(duty, pc->base + pc->data->regs.duty);
+	writel(0, pc->base + pc->data->regs.cntr);
+
+	clk_disable(pc->clk);
+
+	return 0;
+}
+
+static int rockchip_pwm_set_polarity(struct pwm_chip *chip,
+				     struct pwm_device *pwm,
+				     enum pwm_polarity polarity)
+{
+	/*
+	 * No action needed here because pwm->polarity will be set by the core
+	 * and the core will only change polarity when the PWM is not enabled.
+	 * We'll handle things in set_enable().
+	 */
+
+	return 0;
+}
+
+static int rockchip_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip);
+	int ret;
+
+	ret = clk_enable(pc->clk);
+	if (ret)
+		return ret;
+
+	pc->data->set_enable(chip, pwm, true);
+
+	return 0;
+}
+
+static void rockchip_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip);
+
+	pc->data->set_enable(chip, pwm, false);
+
+	clk_disable(pc->clk);
+}
+
+static const struct pwm_ops rockchip_pwm_ops_v1 = {
+	.config = rockchip_pwm_config,
+	.enable = rockchip_pwm_enable,
+	.disable = rockchip_pwm_disable,
+	.owner = THIS_MODULE,
+};
+
+static const struct pwm_ops rockchip_pwm_ops_v2 = {
+	.config = rockchip_pwm_config,
+	.set_polarity = rockchip_pwm_set_polarity,
+	.enable = rockchip_pwm_enable,
+	.disable = rockchip_pwm_disable,
+	.owner = THIS_MODULE,
+};
+
+static const struct rockchip_pwm_data pwm_data_v1 = {
+	.regs = {
+		.duty = 0x04,
+		.period = 0x08,
+		.cntr = 0x00,
+		.ctrl = 0x0c,
+	},
+	.prescaler = 2,
+	.ops = &rockchip_pwm_ops_v1,
+	.set_enable = rockchip_pwm_set_enable_v1,
+};
+
+static const struct rockchip_pwm_data pwm_data_v2 = {
+	.regs = {
+		.duty = 0x08,
+		.period = 0x04,
+		.cntr = 0x00,
+		.ctrl = 0x0c,
+	},
+	.prescaler = 1,
+	.ops = &rockchip_pwm_ops_v2,
+	.set_enable = rockchip_pwm_set_enable_v2,
+};
+
+static const struct rockchip_pwm_data pwm_data_vop = {
+	.regs = {
+		.duty = 0x08,
+		.period = 0x04,
+		.cntr = 0x0c,
+		.ctrl = 0x00,
+	},
+	.prescaler = 1,
+	.ops = &rockchip_pwm_ops_v2,
+	.set_enable = rockchip_pwm_set_enable_v2,
+};
+
+static const struct of_device_id rockchip_pwm_dt_ids[] = {
+	{ .compatible = "rockchip,rk2928-pwm", .data = &pwm_data_v1},
+	{ .compatible = "rockchip,rk3288-pwm", .data = &pwm_data_v2},
+	{ .compatible = "rockchip,vop-pwm", .data = &pwm_data_vop},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, rockchip_pwm_dt_ids);
+
+static int rockchip_pwm_probe(struct platform_device *pdev)
+{
+	const struct of_device_id *id;
+	struct rockchip_pwm_chip *pc;
+	struct resource *r;
+	int ret;
+
+	id = of_match_device(rockchip_pwm_dt_ids, &pdev->dev);
+	if (!id)
+		return -EINVAL;
+
+	pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL);
+	if (!pc)
+		return -ENOMEM;
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	pc->base = devm_ioremap_resource(&pdev->dev, r);
+	if (IS_ERR(pc->base))
+		return PTR_ERR(pc->base);
+
+	pc->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(pc->clk))
+		return PTR_ERR(pc->clk);
+
+	ret = clk_prepare(pc->clk);
+	if (ret)
+		return ret;
+
+	platform_set_drvdata(pdev, pc);
+
+	pc->data = id->data;
+	pc->chip.dev = &pdev->dev;
+	pc->chip.ops = pc->data->ops;
+	pc->chip.base = -1;
+	pc->chip.npwm = 1;
+
+	if (pc->data->ops->set_polarity) {
+		pc->chip.of_xlate = of_pwm_xlate_with_flags;
+		pc->chip.of_pwm_n_cells = 3;
+	}
+
+	ret = pwmchip_add(&pc->chip);
+	if (ret < 0) {
+		clk_unprepare(pc->clk);
+		dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
+	}
+
+	return ret;
+}
+
+static int rockchip_pwm_remove(struct platform_device *pdev)
+{
+	struct rockchip_pwm_chip *pc = platform_get_drvdata(pdev);
+
+	clk_unprepare(pc->clk);
+
+	return pwmchip_remove(&pc->chip);
+}
+
+static struct platform_driver rockchip_pwm_driver = {
+	.driver = {
+		.name = "rockchip-pwm",
+		.of_match_table = rockchip_pwm_dt_ids,
+	},
+	.probe = rockchip_pwm_probe,
+	.remove = rockchip_pwm_remove,
+};
+module_platform_driver(rockchip_pwm_driver);
+
+MODULE_AUTHOR("Beniamino Galvani <b.galvani@gmail.com>");
+MODULE_DESCRIPTION("Rockchip SoC PWM driver");
+MODULE_LICENSE("GPL v2");
diff --git a/kernel/drivers/pwm/pwm-samsung.c b/kernel/drivers/pwm/pwm-samsung.c
new file mode 100644
index 000000000..ff201e1b9
--- /dev/null
+++ b/kernel/drivers/pwm/pwm-samsung.c
@@ -0,0 +1,644 @@
+/*
+ * Copyright (c) 2007 Ben Dooks
+ * Copyright (c) 2008 Simtec Electronics
+ *     Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org>
+ * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ *
+ * PWM driver for Samsung SoCs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/export.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/time.h>
+
+/* For struct samsung_timer_variant and samsung_pwm_lock. */
+#include <clocksource/samsung_pwm.h>
+
+#define REG_TCFG0			0x00
+#define REG_TCFG1			0x04
+#define REG_TCON			0x08
+
+#define REG_TCNTB(chan)			(0x0c + ((chan) * 0xc))
+#define REG_TCMPB(chan)			(0x10 + ((chan) * 0xc))
+
+#define TCFG0_PRESCALER_MASK		0xff
+#define TCFG0_PRESCALER1_SHIFT		8
+
+#define TCFG1_MUX_MASK			0xf
+#define TCFG1_SHIFT(chan)		(4 * (chan))
+
+/*
+ * Each channel occupies 4 bits in TCON register, but there is a gap of 4
+ * bits (one channel) after channel 0, so channels have different numbering
+ * when accessing TCON register. See to_tcon_channel() function.
+ *
+ * In addition, the location of autoreload bit for channel 4 (TCON channel 5)
+ * in its set of bits is 2 as opposed to 3 for other channels.
+ */
+#define TCON_START(chan)		BIT(4 * (chan) + 0)
+#define TCON_MANUALUPDATE(chan)		BIT(4 * (chan) + 1)
+#define TCON_INVERT(chan)		BIT(4 * (chan) + 2)
+#define _TCON_AUTORELOAD(chan)		BIT(4 * (chan) + 3)
+#define _TCON_AUTORELOAD4(chan)		BIT(4 * (chan) + 2)
+#define TCON_AUTORELOAD(chan)		\
+	((chan < 5) ? _TCON_AUTORELOAD(chan) : _TCON_AUTORELOAD4(chan))
+
+/**
+ * struct samsung_pwm_channel - private data of PWM channel
+ * @period_ns:	current period in nanoseconds programmed to the hardware
+ * @duty_ns:	current duty time in nanoseconds programmed to the hardware
+ * @tin_ns:	time of one timer tick in nanoseconds with current timer rate
+ */
+struct samsung_pwm_channel {
+	u32 period_ns;
+	u32 duty_ns;
+	u32 tin_ns;
+};
+
+/**
+ * struct samsung_pwm_chip - private data of PWM chip
+ * @chip:		generic PWM chip
+ * @variant:		local copy of hardware variant data
+ * @inverter_mask:	inverter status for all channels - one bit per channel
+ * @base:		base address of mapped PWM registers
+ * @base_clk:		base clock used to drive the timers
+ * @tclk0:		external clock 0 (can be ERR_PTR if not present)
+ * @tclk1:		external clock 1 (can be ERR_PTR if not present)
+ */
+struct samsung_pwm_chip {
+	struct pwm_chip chip;
+	struct samsung_pwm_variant variant;
+	u8 inverter_mask;
+
+	void __iomem *base;
+	struct clk *base_clk;
+	struct clk *tclk0;
+	struct clk *tclk1;
+};
+
+#ifndef CONFIG_CLKSRC_SAMSUNG_PWM
+/*
+ * PWM block is shared between pwm-samsung and samsung_pwm_timer drivers
+ * and some registers need access synchronization. If both drivers are
+ * compiled in, the spinlock is defined in the clocksource driver,
+ * otherwise following definition is used.
+ *
+ * Currently we do not need any more complex synchronization method
+ * because all the supported SoCs contain only one instance of the PWM
+ * IP. Should this change, both drivers will need to be modified to
+ * properly synchronize accesses to particular instances.
+ */
+static DEFINE_SPINLOCK(samsung_pwm_lock);
+#endif
+
+static inline
+struct samsung_pwm_chip *to_samsung_pwm_chip(struct pwm_chip *chip)
+{
+	return container_of(chip, struct samsung_pwm_chip, chip);
+}
+
+static inline unsigned int to_tcon_channel(unsigned int channel)
+{
+	/* TCON register has a gap of 4 bits (1 channel) after channel 0 */
+	return (channel == 0) ? 0 : (channel + 1);
+}
+
+static void pwm_samsung_set_divisor(struct samsung_pwm_chip *pwm,
+				    unsigned int channel, u8 divisor)
+{
+	u8 shift = TCFG1_SHIFT(channel);
+	unsigned long flags;
+	u32 reg;
+	u8 bits;
+
+	bits = (fls(divisor) - 1) - pwm->variant.div_base;
+
+	spin_lock_irqsave(&samsung_pwm_lock, flags);
+
+	reg = readl(pwm->base + REG_TCFG1);
+	reg &= ~(TCFG1_MUX_MASK << shift);
+	reg |= bits << shift;
+	writel(reg, pwm->base + REG_TCFG1);
+
+	spin_unlock_irqrestore(&samsung_pwm_lock, flags);
+}
+
+static int pwm_samsung_is_tdiv(struct samsung_pwm_chip *chip, unsigned int chan)
+{
+	struct samsung_pwm_variant *variant = &chip->variant;
+	u32 reg;
+
+	reg = readl(chip->base + REG_TCFG1);
+	reg >>= TCFG1_SHIFT(chan);
+	reg &= TCFG1_MUX_MASK;
+
+	return (BIT(reg) & variant->tclk_mask) == 0;
+}
+
+static unsigned long pwm_samsung_get_tin_rate(struct samsung_pwm_chip *chip,
+					      unsigned int chan)
+{
+	unsigned long rate;
+	u32 reg;
+
+	rate = clk_get_rate(chip->base_clk);
+
+	reg = readl(chip->base + REG_TCFG0);
+	if (chan >= 2)
+		reg >>= TCFG0_PRESCALER1_SHIFT;
+	reg &= TCFG0_PRESCALER_MASK;
+
+	return rate / (reg + 1);
+}
+
+static unsigned long pwm_samsung_calc_tin(struct samsung_pwm_chip *chip,
+					  unsigned int chan, unsigned long freq)
+{
+	struct samsung_pwm_variant *variant = &chip->variant;
+	unsigned long rate;
+	struct clk *clk;
+	u8 div;
+
+	if (!pwm_samsung_is_tdiv(chip, chan)) {
+		clk = (chan < 2) ? chip->tclk0 : chip->tclk1;
+		if (!IS_ERR(clk)) {
+			rate = clk_get_rate(clk);
+			if (rate)
+				return rate;
+		}
+
+		dev_warn(chip->chip.dev,
+			"tclk of PWM %d is inoperational, using tdiv\n", chan);
+	}
+
+	rate = pwm_samsung_get_tin_rate(chip, chan);
+	dev_dbg(chip->chip.dev, "tin parent at %lu\n", rate);
+
+	/*
+	 * Compare minimum PWM frequency that can be achieved with possible
+	 * divider settings and choose the lowest divisor that can generate
+	 * frequencies lower than requested.
+	 */
+	for (div = variant->div_base; div < 4; ++div)
+		if ((rate >> (variant->bits + div)) < freq)
+			break;
+
+	pwm_samsung_set_divisor(chip, chan, BIT(div));
+
+	return rate >> div;
+}
+
+static int pwm_samsung_request(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct samsung_pwm_chip *our_chip = to_samsung_pwm_chip(chip);
+	struct samsung_pwm_channel *our_chan;
+
+	if (!(our_chip->variant.output_mask & BIT(pwm->hwpwm))) {
+		dev_warn(chip->dev,
+			"tried to request PWM channel %d without output\n",
+			pwm->hwpwm);
+		return -EINVAL;
+	}
+
+	our_chan = devm_kzalloc(chip->dev, sizeof(*our_chan), GFP_KERNEL);
+	if (!our_chan)
+		return -ENOMEM;
+
+	pwm_set_chip_data(pwm, our_chan);
+
+	return 0;
+}
+
+static void pwm_samsung_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	devm_kfree(chip->dev, pwm_get_chip_data(pwm));
+	pwm_set_chip_data(pwm, NULL);
+}
+
+static int pwm_samsung_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct samsung_pwm_chip *our_chip = to_samsung_pwm_chip(chip);
+	unsigned int tcon_chan = to_tcon_channel(pwm->hwpwm);
+	unsigned long flags;
+	u32 tcon;
+
+	spin_lock_irqsave(&samsung_pwm_lock, flags);
+
+	tcon = readl(our_chip->base + REG_TCON);
+
+	tcon &= ~TCON_START(tcon_chan);
+	tcon |= TCON_MANUALUPDATE(tcon_chan);
+	writel(tcon, our_chip->base + REG_TCON);
+
+	tcon &= ~TCON_MANUALUPDATE(tcon_chan);
+	tcon |= TCON_START(tcon_chan) | TCON_AUTORELOAD(tcon_chan);
+	writel(tcon, our_chip->base + REG_TCON);
+
+	spin_unlock_irqrestore(&samsung_pwm_lock, flags);
+
+	return 0;
+}
+
+static void pwm_samsung_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct samsung_pwm_chip *our_chip = to_samsung_pwm_chip(chip);
+	unsigned int tcon_chan = to_tcon_channel(pwm->hwpwm);
+	unsigned long flags;
+	u32 tcon;
+
+	spin_lock_irqsave(&samsung_pwm_lock, flags);
+
+	tcon = readl(our_chip->base + REG_TCON);
+	tcon &= ~TCON_AUTORELOAD(tcon_chan);
+	writel(tcon, our_chip->base + REG_TCON);
+
+	spin_unlock_irqrestore(&samsung_pwm_lock, flags);
+}
+
+static void pwm_samsung_manual_update(struct samsung_pwm_chip *chip,
+				      struct pwm_device *pwm)
+{
+	unsigned int tcon_chan = to_tcon_channel(pwm->hwpwm);
+	u32 tcon;
+	unsigned long flags;
+
+	spin_lock_irqsave(&samsung_pwm_lock, flags);
+
+	tcon = readl(chip->base + REG_TCON);
+	tcon |= TCON_MANUALUPDATE(tcon_chan);
+	writel(tcon, chip->base + REG_TCON);
+
+	tcon &= ~TCON_MANUALUPDATE(tcon_chan);
+	writel(tcon, chip->base + REG_TCON);
+
+	spin_unlock_irqrestore(&samsung_pwm_lock, flags);
+}
+
+static int pwm_samsung_config(struct pwm_chip *chip, struct pwm_device *pwm,
+			      int duty_ns, int period_ns)
+{
+	struct samsung_pwm_chip *our_chip = to_samsung_pwm_chip(chip);
+	struct samsung_pwm_channel *chan = pwm_get_chip_data(pwm);
+	u32 tin_ns = chan->tin_ns, tcnt, tcmp, oldtcmp;
+
+	/*
+	 * We currently avoid using 64bit arithmetic by using the
+	 * fact that anything faster than 1Hz is easily representable
+	 * by 32bits.
+	 */
+	if (period_ns > NSEC_PER_SEC)
+		return -ERANGE;
+
+	if (period_ns == chan->period_ns && duty_ns == chan->duty_ns)
+		return 0;
+
+	tcnt = readl(our_chip->base + REG_TCNTB(pwm->hwpwm));
+	oldtcmp = readl(our_chip->base + REG_TCMPB(pwm->hwpwm));
+
+	/* We need tick count for calculation, not last tick. */
+	++tcnt;
+
+	/* Check to see if we are changing the clock rate of the PWM. */
+	if (chan->period_ns != period_ns) {
+		unsigned long tin_rate;
+		u32 period;
+
+		period = NSEC_PER_SEC / period_ns;
+
+		dev_dbg(our_chip->chip.dev, "duty_ns=%d, period_ns=%d (%u)\n",
+						duty_ns, period_ns, period);
+
+		tin_rate = pwm_samsung_calc_tin(our_chip, pwm->hwpwm, period);
+
+		dev_dbg(our_chip->chip.dev, "tin_rate=%lu\n", tin_rate);
+
+		tin_ns = NSEC_PER_SEC / tin_rate;
+		tcnt = period_ns / tin_ns;
+	}
+
+	/* Period is too short. */
+	if (tcnt <= 1)
+		return -ERANGE;
+
+	/* Note that counters count down. */
+	tcmp = duty_ns / tin_ns;
+
+	/* 0% duty is not available */
+	if (!tcmp)
+		++tcmp;
+
+	tcmp = tcnt - tcmp;
+
+	/* Decrement to get tick numbers, instead of tick counts. */
+	--tcnt;
+	/* -1UL will give 100% duty. */
+	--tcmp;
+
+	dev_dbg(our_chip->chip.dev,
+				"tin_ns=%u, tcmp=%u/%u\n", tin_ns, tcmp, tcnt);
+
+	/* Update PWM registers. */
+	writel(tcnt, our_chip->base + REG_TCNTB(pwm->hwpwm));
+	writel(tcmp, our_chip->base + REG_TCMPB(pwm->hwpwm));
+
+	/*
+	 * In case the PWM is currently at 100% duty cycle, force a manual
+	 * update to prevent the signal staying high if the PWM is disabled
+	 * shortly afer this update (before it autoreloaded the new values).
+	 */
+	if (oldtcmp == (u32) -1) {
+		dev_dbg(our_chip->chip.dev, "Forcing manual update");
+		pwm_samsung_manual_update(our_chip, pwm);
+	}
+
+	chan->period_ns = period_ns;
+	chan->tin_ns = tin_ns;
+	chan->duty_ns = duty_ns;
+
+	return 0;
+}
+
+static void pwm_samsung_set_invert(struct samsung_pwm_chip *chip,
+				   unsigned int channel, bool invert)
+{
+	unsigned int tcon_chan = to_tcon_channel(channel);
+	unsigned long flags;
+	u32 tcon;
+
+	spin_lock_irqsave(&samsung_pwm_lock, flags);
+
+	tcon = readl(chip->base + REG_TCON);
+
+	if (invert) {
+		chip->inverter_mask |= BIT(channel);
+		tcon |= TCON_INVERT(tcon_chan);
+	} else {
+		chip->inverter_mask &= ~BIT(channel);
+		tcon &= ~TCON_INVERT(tcon_chan);
+	}
+
+	writel(tcon, chip->base + REG_TCON);
+
+	spin_unlock_irqrestore(&samsung_pwm_lock, flags);
+}
+
+static int pwm_samsung_set_polarity(struct pwm_chip *chip,
+				    struct pwm_device *pwm,
+				    enum pwm_polarity polarity)
+{
+	struct samsung_pwm_chip *our_chip = to_samsung_pwm_chip(chip);
+	bool invert = (polarity == PWM_POLARITY_NORMAL);
+
+	/* Inverted means normal in the hardware. */
+	pwm_samsung_set_invert(our_chip, pwm->hwpwm, invert);
+
+	return 0;
+}
+
+static const struct pwm_ops pwm_samsung_ops = {
+	.request	= pwm_samsung_request,
+	.free		= pwm_samsung_free,
+	.enable		= pwm_samsung_enable,
+	.disable	= pwm_samsung_disable,
+	.config		= pwm_samsung_config,
+	.set_polarity	= pwm_samsung_set_polarity,
+	.owner		= THIS_MODULE,
+};
+
+#ifdef CONFIG_OF
+static const struct samsung_pwm_variant s3c24xx_variant = {
+	.bits		= 16,
+	.div_base	= 1,
+	.has_tint_cstat	= false,
+	.tclk_mask	= BIT(4),
+};
+
+static const struct samsung_pwm_variant s3c64xx_variant = {
+	.bits		= 32,
+	.div_base	= 0,
+	.has_tint_cstat	= true,
+	.tclk_mask	= BIT(7) | BIT(6) | BIT(5),
+};
+
+static const struct samsung_pwm_variant s5p64x0_variant = {
+	.bits		= 32,
+	.div_base	= 0,
+	.has_tint_cstat	= true,
+	.tclk_mask	= 0,
+};
+
+static const struct samsung_pwm_variant s5pc100_variant = {
+	.bits		= 32,
+	.div_base	= 0,
+	.has_tint_cstat	= true,
+	.tclk_mask	= BIT(5),
+};
+
+static const struct of_device_id samsung_pwm_matches[] = {
+	{ .compatible = "samsung,s3c2410-pwm", .data = &s3c24xx_variant },
+	{ .compatible = "samsung,s3c6400-pwm", .data = &s3c64xx_variant },
+	{ .compatible = "samsung,s5p6440-pwm", .data = &s5p64x0_variant },
+	{ .compatible = "samsung,s5pc100-pwm", .data = &s5pc100_variant },
+	{ .compatible = "samsung,exynos4210-pwm", .data = &s5p64x0_variant },
+	{},
+};
+
+static int pwm_samsung_parse_dt(struct samsung_pwm_chip *chip)
+{
+	struct device_node *np = chip->chip.dev->of_node;
+	const struct of_device_id *match;
+	struct property *prop;
+	const __be32 *cur;
+	u32 val;
+
+	match = of_match_node(samsung_pwm_matches, np);
+	if (!match)
+		return -ENODEV;
+
+	memcpy(&chip->variant, match->data, sizeof(chip->variant));
+
+	of_property_for_each_u32(np, "samsung,pwm-outputs", prop, cur, val) {
+		if (val >= SAMSUNG_PWM_NUM) {
+			dev_err(chip->chip.dev,
+				"%s: invalid channel index in samsung,pwm-outputs property\n",
+								__func__);
+			continue;
+		}
+		chip->variant.output_mask |= BIT(val);
+	}
+
+	return 0;
+}
+#else
+static int pwm_samsung_parse_dt(struct samsung_pwm_chip *chip)
+{
+	return -ENODEV;
+}
+#endif
+
+static int pwm_samsung_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct samsung_pwm_chip *chip;
+	struct resource *res;
+	unsigned int chan;
+	int ret;
+
+	chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
+	if (chip == NULL)
+		return -ENOMEM;
+
+	chip->chip.dev = &pdev->dev;
+	chip->chip.ops = &pwm_samsung_ops;
+	chip->chip.base = -1;
+	chip->chip.npwm = SAMSUNG_PWM_NUM;
+	chip->inverter_mask = BIT(SAMSUNG_PWM_NUM) - 1;
+
+	if (IS_ENABLED(CONFIG_OF) && pdev->dev.of_node) {
+		ret = pwm_samsung_parse_dt(chip);
+		if (ret)
+			return ret;
+
+		chip->chip.of_xlate = of_pwm_xlate_with_flags;
+		chip->chip.of_pwm_n_cells = 3;
+	} else {
+		if (!pdev->dev.platform_data) {
+			dev_err(&pdev->dev, "no platform data specified\n");
+			return -EINVAL;
+		}
+
+		memcpy(&chip->variant, pdev->dev.platform_data,
+							sizeof(chip->variant));
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	chip->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(chip->base))
+		return PTR_ERR(chip->base);
+
+	chip->base_clk = devm_clk_get(&pdev->dev, "timers");
+	if (IS_ERR(chip->base_clk)) {
+		dev_err(dev, "failed to get timer base clk\n");
+		return PTR_ERR(chip->base_clk);
+	}
+
+	ret = clk_prepare_enable(chip->base_clk);
+	if (ret < 0) {
+		dev_err(dev, "failed to enable base clock\n");
+		return ret;
+	}
+
+	for (chan = 0; chan < SAMSUNG_PWM_NUM; ++chan)
+		if (chip->variant.output_mask & BIT(chan))
+			pwm_samsung_set_invert(chip, chan, true);
+
+	/* Following clocks are optional. */
+	chip->tclk0 = devm_clk_get(&pdev->dev, "pwm-tclk0");
+	chip->tclk1 = devm_clk_get(&pdev->dev, "pwm-tclk1");
+
+	platform_set_drvdata(pdev, chip);
+
+	ret = pwmchip_add(&chip->chip);
+	if (ret < 0) {
+		dev_err(dev, "failed to register PWM chip\n");
+		clk_disable_unprepare(chip->base_clk);
+		return ret;
+	}
+
+	dev_dbg(dev, "base_clk at %lu, tclk0 at %lu, tclk1 at %lu\n",
+		clk_get_rate(chip->base_clk),
+		!IS_ERR(chip->tclk0) ? clk_get_rate(chip->tclk0) : 0,
+		!IS_ERR(chip->tclk1) ? clk_get_rate(chip->tclk1) : 0);
+
+	return 0;
+}
+
+static int pwm_samsung_remove(struct platform_device *pdev)
+{
+	struct samsung_pwm_chip *chip = platform_get_drvdata(pdev);
+	int ret;
+
+	ret = pwmchip_remove(&chip->chip);
+	if (ret < 0)
+		return ret;
+
+	clk_disable_unprepare(chip->base_clk);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int pwm_samsung_suspend(struct device *dev)
+{
+	struct samsung_pwm_chip *chip = dev_get_drvdata(dev);
+	unsigned int i;
+
+	/*
+	 * No one preserves these values during suspend so reset them.
+	 * Otherwise driver leaves PWM unconfigured if same values are
+	 * passed to pwm_config() next time.
+	 */
+	for (i = 0; i < SAMSUNG_PWM_NUM; ++i) {
+		struct pwm_device *pwm = &chip->chip.pwms[i];
+		struct samsung_pwm_channel *chan = pwm_get_chip_data(pwm);
+
+		if (!chan)
+			continue;
+
+		chan->period_ns = 0;
+		chan->duty_ns = 0;
+	}
+
+	return 0;
+}
+
+static int pwm_samsung_resume(struct device *dev)
+{
+	struct samsung_pwm_chip *chip = dev_get_drvdata(dev);
+	unsigned int chan;
+
+	/*
+	 * Inverter setting must be preserved across suspend/resume
+	 * as nobody really seems to configure it more than once.
+	 */
+	for (chan = 0; chan < SAMSUNG_PWM_NUM; ++chan) {
+		if (chip->variant.output_mask & BIT(chan))
+			pwm_samsung_set_invert(chip, chan,
+					chip->inverter_mask & BIT(chan));
+	}
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(pwm_samsung_pm_ops, pwm_samsung_suspend,
+			 pwm_samsung_resume);
+
+static struct platform_driver pwm_samsung_driver = {
+	.driver		= {
+		.name	= "samsung-pwm",
+		.pm	= &pwm_samsung_pm_ops,
+		.of_match_table = of_match_ptr(samsung_pwm_matches),
+	},
+	.probe		= pwm_samsung_probe,
+	.remove		= pwm_samsung_remove,
+};
+module_platform_driver(pwm_samsung_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Tomasz Figa <tomasz.figa@gmail.com>");
+MODULE_ALIAS("platform:samsung-pwm");
diff --git a/kernel/drivers/pwm/pwm-spear.c b/kernel/drivers/pwm/pwm-spear.c
new file mode 100644
index 000000000..6c6b44fd3
--- /dev/null
+++ b/kernel/drivers/pwm/pwm-spear.c
@@ -0,0 +1,266 @@
+/*
+ * ST Microelectronics SPEAr Pulse Width Modulator driver
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Shiraz Hashim <shiraz.linux.kernel@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/math64.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+#define NUM_PWM		4
+
+/* PWM registers and bits definitions */
+#define PWMCR			0x00	/* Control Register */
+#define PWMCR_PWM_ENABLE	0x1
+#define PWMCR_PRESCALE_SHIFT	2
+#define PWMCR_MIN_PRESCALE	0x00
+#define PWMCR_MAX_PRESCALE	0x3FFF
+
+#define PWMDCR			0x04	/* Duty Cycle Register */
+#define PWMDCR_MIN_DUTY		0x0001
+#define PWMDCR_MAX_DUTY		0xFFFF
+
+#define PWMPCR			0x08	/* Period Register */
+#define PWMPCR_MIN_PERIOD	0x0001
+#define PWMPCR_MAX_PERIOD	0xFFFF
+
+/* Following only available on 13xx SoCs */
+#define PWMMCR			0x3C	/* Master Control Register */
+#define PWMMCR_PWM_ENABLE	0x1
+
+/**
+ * struct spear_pwm_chip - struct representing pwm chip
+ *
+ * @mmio_base: base address of pwm chip
+ * @clk: pointer to clk structure of pwm chip
+ * @chip: linux pwm chip representation
+ */
+struct spear_pwm_chip {
+	void __iomem *mmio_base;
+	struct clk *clk;
+	struct pwm_chip chip;
+};
+
+static inline struct spear_pwm_chip *to_spear_pwm_chip(struct pwm_chip *chip)
+{
+	return container_of(chip, struct spear_pwm_chip, chip);
+}
+
+static inline u32 spear_pwm_readl(struct spear_pwm_chip *chip, unsigned int num,
+				  unsigned long offset)
+{
+	return readl_relaxed(chip->mmio_base + (num << 4) + offset);
+}
+
+static inline void spear_pwm_writel(struct spear_pwm_chip *chip,
+				    unsigned int num, unsigned long offset,
+				    unsigned long val)
+{
+	writel_relaxed(val, chip->mmio_base + (num << 4) + offset);
+}
+
+static int spear_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+			    int duty_ns, int period_ns)
+{
+	struct spear_pwm_chip *pc = to_spear_pwm_chip(chip);
+	u64 val, div, clk_rate;
+	unsigned long prescale = PWMCR_MIN_PRESCALE, pv, dc;
+	int ret;
+
+	/*
+	 * Find pv, dc and prescale to suit duty_ns and period_ns. This is done
+	 * according to formulas described below:
+	 *
+	 * period_ns = 10^9 * (PRESCALE + 1) * PV / PWM_CLK_RATE
+	 * duty_ns = 10^9 * (PRESCALE + 1) * DC / PWM_CLK_RATE
+	 *
+	 * PV = (PWM_CLK_RATE * period_ns) / (10^9 * (PRESCALE + 1))
+	 * DC = (PWM_CLK_RATE * duty_ns) / (10^9 * (PRESCALE + 1))
+	 */
+	clk_rate = clk_get_rate(pc->clk);
+	while (1) {
+		div = 1000000000;
+		div *= 1 + prescale;
+		val = clk_rate * period_ns;
+		pv = div64_u64(val, div);
+		val = clk_rate * duty_ns;
+		dc = div64_u64(val, div);
+
+		/* if duty_ns and period_ns are not achievable then return */
+		if (pv < PWMPCR_MIN_PERIOD || dc < PWMDCR_MIN_DUTY)
+			return -EINVAL;
+
+		/*
+		 * if pv and dc have crossed their upper limit, then increase
+		 * prescale and recalculate pv and dc.
+		 */
+		if (pv > PWMPCR_MAX_PERIOD || dc > PWMDCR_MAX_DUTY) {
+			if (++prescale > PWMCR_MAX_PRESCALE)
+				return -EINVAL;
+			continue;
+		}
+		break;
+	}
+
+	/*
+	 * NOTE: the clock to PWM has to be enabled first before writing to the
+	 * registers.
+	 */
+	ret = clk_enable(pc->clk);
+	if (ret)
+		return ret;
+
+	spear_pwm_writel(pc, pwm->hwpwm, PWMCR,
+			prescale << PWMCR_PRESCALE_SHIFT);
+	spear_pwm_writel(pc, pwm->hwpwm, PWMDCR, dc);
+	spear_pwm_writel(pc, pwm->hwpwm, PWMPCR, pv);
+	clk_disable(pc->clk);
+
+	return 0;
+}
+
+static int spear_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct spear_pwm_chip *pc = to_spear_pwm_chip(chip);
+	int rc = 0;
+	u32 val;
+
+	rc = clk_enable(pc->clk);
+	if (rc)
+		return rc;
+
+	val = spear_pwm_readl(pc, pwm->hwpwm, PWMCR);
+	val |= PWMCR_PWM_ENABLE;
+	spear_pwm_writel(pc, pwm->hwpwm, PWMCR, val);
+
+	return 0;
+}
+
+static void spear_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct spear_pwm_chip *pc = to_spear_pwm_chip(chip);
+	u32 val;
+
+	val = spear_pwm_readl(pc, pwm->hwpwm, PWMCR);
+	val &= ~PWMCR_PWM_ENABLE;
+	spear_pwm_writel(pc, pwm->hwpwm, PWMCR, val);
+
+	clk_disable(pc->clk);
+}
+
+static const struct pwm_ops spear_pwm_ops = {
+	.config = spear_pwm_config,
+	.enable = spear_pwm_enable,
+	.disable = spear_pwm_disable,
+	.owner = THIS_MODULE,
+};
+
+static int spear_pwm_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct spear_pwm_chip *pc;
+	struct resource *r;
+	int ret;
+	u32 val;
+
+	pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL);
+	if (!pc)
+		return -ENOMEM;
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	pc->mmio_base = devm_ioremap_resource(&pdev->dev, r);
+	if (IS_ERR(pc->mmio_base))
+		return PTR_ERR(pc->mmio_base);
+
+	pc->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(pc->clk))
+		return PTR_ERR(pc->clk);
+
+	platform_set_drvdata(pdev, pc);
+
+	pc->chip.dev = &pdev->dev;
+	pc->chip.ops = &spear_pwm_ops;
+	pc->chip.base = -1;
+	pc->chip.npwm = NUM_PWM;
+
+	ret = clk_prepare(pc->clk);
+	if (ret)
+		return ret;
+
+	if (of_device_is_compatible(np, "st,spear1340-pwm")) {
+		ret = clk_enable(pc->clk);
+		if (ret) {
+			clk_unprepare(pc->clk);
+			return ret;
+		}
+		/*
+		 * Following enables PWM chip, channels would still be
+		 * enabled individually through their control register
+		 */
+		val = readl_relaxed(pc->mmio_base + PWMMCR);
+		val |= PWMMCR_PWM_ENABLE;
+		writel_relaxed(val, pc->mmio_base + PWMMCR);
+
+		clk_disable(pc->clk);
+	}
+
+	ret = pwmchip_add(&pc->chip);
+	if (ret < 0) {
+		clk_unprepare(pc->clk);
+		dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
+	}
+
+	return ret;
+}
+
+static int spear_pwm_remove(struct platform_device *pdev)
+{
+	struct spear_pwm_chip *pc = platform_get_drvdata(pdev);
+	int i;
+
+	for (i = 0; i < NUM_PWM; i++)
+		pwm_disable(&pc->chip.pwms[i]);
+
+	/* clk was prepared in probe, hence unprepare it here */
+	clk_unprepare(pc->clk);
+	return pwmchip_remove(&pc->chip);
+}
+
+static const struct of_device_id spear_pwm_of_match[] = {
+	{ .compatible = "st,spear320-pwm" },
+	{ .compatible = "st,spear1340-pwm" },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(of, spear_pwm_of_match);
+
+static struct platform_driver spear_pwm_driver = {
+	.driver = {
+		.name = "spear-pwm",
+		.of_match_table = spear_pwm_of_match,
+	},
+	.probe = spear_pwm_probe,
+	.remove = spear_pwm_remove,
+};
+
+module_platform_driver(spear_pwm_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Shiraz Hashim <shiraz.linux.kernel@gmail.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.kumar@linaro.com>");
+MODULE_ALIAS("platform:spear-pwm");
diff --git a/kernel/drivers/pwm/pwm-sti.c b/kernel/drivers/pwm/pwm-sti.c
new file mode 100644
index 000000000..92abbd56b
--- /dev/null
+++ b/kernel/drivers/pwm/pwm-sti.c
@@ -0,0 +1,410 @@
+/*
+ * PWM device driver for ST SoCs.
+ * Author: Ajit Pal Singh <ajitpal.singh@st.com>
+ *
+ * Copyright (C) 2013-2014 STMicroelectronics (R&D) Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/math64.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/time.h>
+
+#define STI_DS_REG(ch)	(4 * (ch))	/* Channel's Duty Cycle register */
+#define STI_PWMCR	0x50		/* Control/Config register */
+#define STI_INTEN	0x54		/* Interrupt Enable/Disable register */
+#define PWM_PRESCALE_LOW_MASK		0x0f
+#define PWM_PRESCALE_HIGH_MASK		0xf0
+
+/* Regfield IDs */
+enum {
+	PWMCLK_PRESCALE_LOW,
+	PWMCLK_PRESCALE_HIGH,
+	PWM_EN,
+	PWM_INT_EN,
+
+	/* Keep last */
+	MAX_REGFIELDS
+};
+
+struct sti_pwm_compat_data {
+	const struct reg_field *reg_fields;
+	unsigned int num_chan;
+	unsigned int max_pwm_cnt;
+	unsigned int max_prescale;
+};
+
+struct sti_pwm_chip {
+	struct device *dev;
+	struct clk *clk;
+	unsigned long clk_rate;
+	struct regmap *regmap;
+	struct sti_pwm_compat_data *cdata;
+	struct regmap_field *prescale_low;
+	struct regmap_field *prescale_high;
+	struct regmap_field *pwm_en;
+	struct regmap_field *pwm_int_en;
+	struct pwm_chip chip;
+	struct pwm_device *cur;
+	unsigned long configured;
+	unsigned int en_count;
+	struct mutex sti_pwm_lock; /* To sync between enable/disable calls */
+	void __iomem *mmio;
+};
+
+static const struct reg_field sti_pwm_regfields[MAX_REGFIELDS] = {
+	[PWMCLK_PRESCALE_LOW]	= REG_FIELD(STI_PWMCR, 0, 3),
+	[PWMCLK_PRESCALE_HIGH]	= REG_FIELD(STI_PWMCR, 11, 14),
+	[PWM_EN]		= REG_FIELD(STI_PWMCR, 9, 9),
+	[PWM_INT_EN]		= REG_FIELD(STI_INTEN, 0, 0),
+};
+
+static inline struct sti_pwm_chip *to_sti_pwmchip(struct pwm_chip *chip)
+{
+	return container_of(chip, struct sti_pwm_chip, chip);
+}
+
+/*
+ * Calculate the prescaler value corresponding to the period.
+ */
+static int sti_pwm_get_prescale(struct sti_pwm_chip *pc, unsigned long period,
+				unsigned int *prescale)
+{
+	struct sti_pwm_compat_data *cdata = pc->cdata;
+	unsigned long val;
+	unsigned int ps;
+
+	/*
+	 * prescale = ((period_ns * clk_rate) / (10^9 * (max_pwm_count + 1)) - 1
+	 */
+	val = NSEC_PER_SEC / pc->clk_rate;
+	val *= cdata->max_pwm_cnt + 1;
+
+	if (period % val) {
+		return -EINVAL;
+	} else {
+		ps  = period / val - 1;
+		if (ps > cdata->max_prescale)
+			return -EINVAL;
+	}
+	*prescale = ps;
+
+	return 0;
+}
+
+/*
+ * For STiH4xx PWM IP, the PWM period is fixed to 256 local clock cycles.
+ * The only way to change the period (apart from changing the PWM input clock)
+ * is to change the PWM clock prescaler.
+ * The prescaler is of 8 bits, so 256 prescaler values and hence
+ * 256 possible period values are supported (for a particular clock rate).
+ * The requested period will be applied only if it matches one of these
+ * 256 values.
+ */
+static int sti_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+			 int duty_ns, int period_ns)
+{
+	struct sti_pwm_chip *pc = to_sti_pwmchip(chip);
+	struct sti_pwm_compat_data *cdata = pc->cdata;
+	struct pwm_device *cur = pc->cur;
+	struct device *dev = pc->dev;
+	unsigned int prescale = 0, pwmvalx;
+	int ret;
+	unsigned int ncfg;
+	bool period_same = false;
+
+	ncfg = hweight_long(pc->configured);
+	if (ncfg)
+		period_same = (period_ns == pwm_get_period(cur));
+
+	/* Allow configuration changes if one of the
+	 * following conditions satisfy.
+	 * 1. No channels have been configured.
+	 * 2. Only one channel has been configured and the new request
+	 *    is for the same channel.
+	 * 3. Only one channel has been configured and the new request is
+	 *    for a new channel and period of the new channel is same as
+	 *    the current configured period.
+	 * 4. More than one channels are configured and period of the new
+	 *    requestis the same as the current period.
+	 */
+	if (!ncfg ||
+	    ((ncfg == 1) && (pwm->hwpwm == cur->hwpwm)) ||
+	    ((ncfg == 1) && (pwm->hwpwm != cur->hwpwm) && period_same) ||
+	    ((ncfg > 1) && period_same)) {
+		/* Enable clock before writing to PWM registers. */
+		ret = clk_enable(pc->clk);
+		if (ret)
+			return ret;
+
+		if (!period_same) {
+			ret = sti_pwm_get_prescale(pc, period_ns, &prescale);
+			if (ret)
+				goto clk_dis;
+
+			ret =
+			regmap_field_write(pc->prescale_low,
+					   prescale & PWM_PRESCALE_LOW_MASK);
+			if (ret)
+				goto clk_dis;
+
+			ret =
+			regmap_field_write(pc->prescale_high,
+				(prescale & PWM_PRESCALE_HIGH_MASK) >> 4);
+			if (ret)
+				goto clk_dis;
+		}
+
+		/*
+		 * When PWMVal == 0, PWM pulse = 1 local clock cycle.
+		 * When PWMVal == max_pwm_count,
+		 * PWM pulse = (max_pwm_count + 1) local cycles,
+		 * that is continuous pulse: signal never goes low.
+		 */
+		pwmvalx = cdata->max_pwm_cnt * duty_ns / period_ns;
+
+		ret = regmap_write(pc->regmap, STI_DS_REG(pwm->hwpwm), pwmvalx);
+		if (ret)
+			goto clk_dis;
+
+		ret = regmap_field_write(pc->pwm_int_en, 0);
+
+		set_bit(pwm->hwpwm, &pc->configured);
+		pc->cur = pwm;
+
+		dev_dbg(dev, "prescale:%u, period:%i, duty:%i, pwmvalx:%u\n",
+			prescale, period_ns, duty_ns, pwmvalx);
+	} else {
+		return -EINVAL;
+	}
+
+clk_dis:
+	clk_disable(pc->clk);
+	return ret;
+}
+
+static int sti_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct sti_pwm_chip *pc = to_sti_pwmchip(chip);
+	struct device *dev = pc->dev;
+	int ret = 0;
+
+	/*
+	 * Since we have a common enable for all PWM channels,
+	 * do not enable if already enabled.
+	 */
+	mutex_lock(&pc->sti_pwm_lock);
+	if (!pc->en_count) {
+		ret = clk_enable(pc->clk);
+		if (ret)
+			goto out;
+
+		ret = regmap_field_write(pc->pwm_en, 1);
+		if (ret) {
+			dev_err(dev, "failed to enable PWM device:%d\n",
+				pwm->hwpwm);
+			goto out;
+		}
+	}
+	pc->en_count++;
+out:
+	mutex_unlock(&pc->sti_pwm_lock);
+	return ret;
+}
+
+static void sti_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct sti_pwm_chip *pc = to_sti_pwmchip(chip);
+
+	mutex_lock(&pc->sti_pwm_lock);
+	if (--pc->en_count) {
+		mutex_unlock(&pc->sti_pwm_lock);
+		return;
+	}
+	regmap_field_write(pc->pwm_en, 0);
+
+	clk_disable(pc->clk);
+	mutex_unlock(&pc->sti_pwm_lock);
+}
+
+static void sti_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct sti_pwm_chip *pc = to_sti_pwmchip(chip);
+
+	clear_bit(pwm->hwpwm, &pc->configured);
+}
+
+static const struct pwm_ops sti_pwm_ops = {
+	.config = sti_pwm_config,
+	.enable = sti_pwm_enable,
+	.disable = sti_pwm_disable,
+	.free = sti_pwm_free,
+	.owner = THIS_MODULE,
+};
+
+static int sti_pwm_probe_dt(struct sti_pwm_chip *pc)
+{
+	struct device *dev = pc->dev;
+	const struct reg_field *reg_fields;
+	struct device_node *np = dev->of_node;
+	struct sti_pwm_compat_data *cdata = pc->cdata;
+	u32 num_chan;
+
+	of_property_read_u32(np, "st,pwm-num-chan", &num_chan);
+	if (num_chan)
+		cdata->num_chan = num_chan;
+
+	reg_fields = cdata->reg_fields;
+
+	pc->prescale_low = devm_regmap_field_alloc(dev, pc->regmap,
+					reg_fields[PWMCLK_PRESCALE_LOW]);
+	if (IS_ERR(pc->prescale_low))
+		return PTR_ERR(pc->prescale_low);
+
+	pc->prescale_high = devm_regmap_field_alloc(dev, pc->regmap,
+					reg_fields[PWMCLK_PRESCALE_HIGH]);
+	if (IS_ERR(pc->prescale_high))
+		return PTR_ERR(pc->prescale_high);
+
+	pc->pwm_en = devm_regmap_field_alloc(dev, pc->regmap,
+					     reg_fields[PWM_EN]);
+	if (IS_ERR(pc->pwm_en))
+		return PTR_ERR(pc->pwm_en);
+
+	pc->pwm_int_en = devm_regmap_field_alloc(dev, pc->regmap,
+						 reg_fields[PWM_INT_EN]);
+	if (IS_ERR(pc->pwm_int_en))
+		return PTR_ERR(pc->pwm_int_en);
+
+	return 0;
+}
+
+static const struct regmap_config sti_pwm_regmap_config = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+};
+
+static int sti_pwm_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct sti_pwm_compat_data *cdata;
+	struct sti_pwm_chip *pc;
+	struct resource *res;
+	int ret;
+
+	pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL);
+	if (!pc)
+		return -ENOMEM;
+
+	cdata = devm_kzalloc(dev, sizeof(*cdata), GFP_KERNEL);
+	if (!cdata)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	pc->mmio = devm_ioremap_resource(dev, res);
+	if (IS_ERR(pc->mmio))
+		return PTR_ERR(pc->mmio);
+
+	pc->regmap = devm_regmap_init_mmio(dev, pc->mmio,
+					   &sti_pwm_regmap_config);
+	if (IS_ERR(pc->regmap))
+		return PTR_ERR(pc->regmap);
+
+	/*
+	 * Setup PWM data with default values: some values could be replaced
+	 * with specific ones provided from Device Tree.
+	 */
+	cdata->reg_fields   = &sti_pwm_regfields[0];
+	cdata->max_prescale = 0xff;
+	cdata->max_pwm_cnt  = 255;
+	cdata->num_chan     = 1;
+
+	pc->cdata = cdata;
+	pc->dev = dev;
+	pc->en_count = 0;
+	mutex_init(&pc->sti_pwm_lock);
+
+	ret = sti_pwm_probe_dt(pc);
+	if (ret)
+		return ret;
+
+	pc->clk = of_clk_get_by_name(dev->of_node, "pwm");
+	if (IS_ERR(pc->clk)) {
+		dev_err(dev, "failed to get PWM clock\n");
+		return PTR_ERR(pc->clk);
+	}
+
+	pc->clk_rate = clk_get_rate(pc->clk);
+	if (!pc->clk_rate) {
+		dev_err(dev, "failed to get clock rate\n");
+		return -EINVAL;
+	}
+
+	ret = clk_prepare(pc->clk);
+	if (ret) {
+		dev_err(dev, "failed to prepare clock\n");
+		return ret;
+	}
+
+	pc->chip.dev = dev;
+	pc->chip.ops = &sti_pwm_ops;
+	pc->chip.base = -1;
+	pc->chip.npwm = pc->cdata->num_chan;
+	pc->chip.can_sleep = true;
+
+	ret = pwmchip_add(&pc->chip);
+	if (ret < 0) {
+		clk_unprepare(pc->clk);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, pc);
+
+	return 0;
+}
+
+static int sti_pwm_remove(struct platform_device *pdev)
+{
+	struct sti_pwm_chip *pc = platform_get_drvdata(pdev);
+	unsigned int i;
+
+	for (i = 0; i < pc->cdata->num_chan; i++)
+		pwm_disable(&pc->chip.pwms[i]);
+
+	clk_unprepare(pc->clk);
+
+	return pwmchip_remove(&pc->chip);
+}
+
+static const struct of_device_id sti_pwm_of_match[] = {
+	{ .compatible = "st,sti-pwm", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, sti_pwm_of_match);
+
+static struct platform_driver sti_pwm_driver = {
+	.driver = {
+		.name = "sti-pwm",
+		.of_match_table = sti_pwm_of_match,
+	},
+	.probe = sti_pwm_probe,
+	.remove = sti_pwm_remove,
+};
+module_platform_driver(sti_pwm_driver);
+
+MODULE_AUTHOR("Ajit Pal Singh <ajitpal.singh@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics ST PWM driver");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/pwm/pwm-sun4i.c b/kernel/drivers/pwm/pwm-sun4i.c
new file mode 100644
index 000000000..cd9dde563
--- /dev/null
+++ b/kernel/drivers/pwm/pwm-sun4i.c
@@ -0,0 +1,366 @@
+/*
+ * Driver for Allwinner sun4i Pulse Width Modulation Controller
+ *
+ * Copyright (C) 2014 Alexandre Belloni <alexandre.belloni@free-electrons.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/time.h>
+
+#define PWM_CTRL_REG		0x0
+
+#define PWM_CH_PRD_BASE		0x4
+#define PWM_CH_PRD_OFFSET	0x4
+#define PWM_CH_PRD(ch)		(PWM_CH_PRD_BASE + PWM_CH_PRD_OFFSET * (ch))
+
+#define PWMCH_OFFSET		15
+#define PWM_PRESCAL_MASK	GENMASK(3, 0)
+#define PWM_PRESCAL_OFF		0
+#define PWM_EN			BIT(4)
+#define PWM_ACT_STATE		BIT(5)
+#define PWM_CLK_GATING		BIT(6)
+#define PWM_MODE		BIT(7)
+#define PWM_PULSE		BIT(8)
+#define PWM_BYPASS		BIT(9)
+
+#define PWM_RDY_BASE		28
+#define PWM_RDY_OFFSET		1
+#define PWM_RDY(ch)		BIT(PWM_RDY_BASE + PWM_RDY_OFFSET * (ch))
+
+#define PWM_PRD(prd)		(((prd) - 1) << 16)
+#define PWM_PRD_MASK		GENMASK(15, 0)
+
+#define PWM_DTY_MASK		GENMASK(15, 0)
+
+#define BIT_CH(bit, chan)	((bit) << ((chan) * PWMCH_OFFSET))
+
+static const u32 prescaler_table[] = {
+	120,
+	180,
+	240,
+	360,
+	480,
+	0,
+	0,
+	0,
+	12000,
+	24000,
+	36000,
+	48000,
+	72000,
+	0,
+	0,
+	0, /* Actually 1 but tested separately */
+};
+
+struct sun4i_pwm_data {
+	bool has_prescaler_bypass;
+	bool has_rdy;
+};
+
+struct sun4i_pwm_chip {
+	struct pwm_chip chip;
+	struct clk *clk;
+	void __iomem *base;
+	spinlock_t ctrl_lock;
+	const struct sun4i_pwm_data *data;
+};
+
+static inline struct sun4i_pwm_chip *to_sun4i_pwm_chip(struct pwm_chip *chip)
+{
+	return container_of(chip, struct sun4i_pwm_chip, chip);
+}
+
+static inline u32 sun4i_pwm_readl(struct sun4i_pwm_chip *chip,
+				  unsigned long offset)
+{
+	return readl(chip->base + offset);
+}
+
+static inline void sun4i_pwm_writel(struct sun4i_pwm_chip *chip,
+				    u32 val, unsigned long offset)
+{
+	writel(val, chip->base + offset);
+}
+
+static int sun4i_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+			    int duty_ns, int period_ns)
+{
+	struct sun4i_pwm_chip *sun4i_pwm = to_sun4i_pwm_chip(chip);
+	u32 prd, dty, val, clk_gate;
+	u64 clk_rate, div = 0;
+	unsigned int prescaler = 0;
+	int err;
+
+	clk_rate = clk_get_rate(sun4i_pwm->clk);
+
+	if (sun4i_pwm->data->has_prescaler_bypass) {
+		/* First, test without any prescaler when available */
+		prescaler = PWM_PRESCAL_MASK;
+		/*
+		 * When not using any prescaler, the clock period in nanoseconds
+		 * is not an integer so round it half up instead of
+		 * truncating to get less surprising values.
+		 */
+		div = clk_rate * period_ns + NSEC_PER_SEC/2;
+		do_div(div, NSEC_PER_SEC);
+		if (div - 1 > PWM_PRD_MASK)
+			prescaler = 0;
+	}
+
+	if (prescaler == 0) {
+		/* Go up from the first divider */
+		for (prescaler = 0; prescaler < PWM_PRESCAL_MASK; prescaler++) {
+			if (!prescaler_table[prescaler])
+				continue;
+			div = clk_rate;
+			do_div(div, prescaler_table[prescaler]);
+			div = div * period_ns;
+			do_div(div, NSEC_PER_SEC);
+			if (div - 1 <= PWM_PRD_MASK)
+				break;
+		}
+
+		if (div - 1 > PWM_PRD_MASK) {
+			dev_err(chip->dev, "period exceeds the maximum value\n");
+			return -EINVAL;
+		}
+	}
+
+	prd = div;
+	div *= duty_ns;
+	do_div(div, period_ns);
+	dty = div;
+
+	err = clk_prepare_enable(sun4i_pwm->clk);
+	if (err) {
+		dev_err(chip->dev, "failed to enable PWM clock\n");
+		return err;
+	}
+
+	spin_lock(&sun4i_pwm->ctrl_lock);
+	val = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG);
+
+	if (sun4i_pwm->data->has_rdy && (val & PWM_RDY(pwm->hwpwm))) {
+		spin_unlock(&sun4i_pwm->ctrl_lock);
+		clk_disable_unprepare(sun4i_pwm->clk);
+		return -EBUSY;
+	}
+
+	clk_gate = val & BIT_CH(PWM_CLK_GATING, pwm->hwpwm);
+	if (clk_gate) {
+		val &= ~BIT_CH(PWM_CLK_GATING, pwm->hwpwm);
+		sun4i_pwm_writel(sun4i_pwm, val, PWM_CTRL_REG);
+	}
+
+	val = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG);
+	val &= ~BIT_CH(PWM_PRESCAL_MASK, pwm->hwpwm);
+	val |= BIT_CH(prescaler, pwm->hwpwm);
+	sun4i_pwm_writel(sun4i_pwm, val, PWM_CTRL_REG);
+
+	val = (dty & PWM_DTY_MASK) | PWM_PRD(prd);
+	sun4i_pwm_writel(sun4i_pwm, val, PWM_CH_PRD(pwm->hwpwm));
+
+	if (clk_gate) {
+		val = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG);
+		val |= clk_gate;
+		sun4i_pwm_writel(sun4i_pwm, val, PWM_CTRL_REG);
+	}
+
+	spin_unlock(&sun4i_pwm->ctrl_lock);
+	clk_disable_unprepare(sun4i_pwm->clk);
+
+	return 0;
+}
+
+static int sun4i_pwm_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm,
+				  enum pwm_polarity polarity)
+{
+	struct sun4i_pwm_chip *sun4i_pwm = to_sun4i_pwm_chip(chip);
+	u32 val;
+	int ret;
+
+	ret = clk_prepare_enable(sun4i_pwm->clk);
+	if (ret) {
+		dev_err(chip->dev, "failed to enable PWM clock\n");
+		return ret;
+	}
+
+	spin_lock(&sun4i_pwm->ctrl_lock);
+	val = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG);
+
+	if (polarity != PWM_POLARITY_NORMAL)
+		val &= ~BIT_CH(PWM_ACT_STATE, pwm->hwpwm);
+	else
+		val |= BIT_CH(PWM_ACT_STATE, pwm->hwpwm);
+
+	sun4i_pwm_writel(sun4i_pwm, val, PWM_CTRL_REG);
+
+	spin_unlock(&sun4i_pwm->ctrl_lock);
+	clk_disable_unprepare(sun4i_pwm->clk);
+
+	return 0;
+}
+
+static int sun4i_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct sun4i_pwm_chip *sun4i_pwm = to_sun4i_pwm_chip(chip);
+	u32 val;
+	int ret;
+
+	ret = clk_prepare_enable(sun4i_pwm->clk);
+	if (ret) {
+		dev_err(chip->dev, "failed to enable PWM clock\n");
+		return ret;
+	}
+
+	spin_lock(&sun4i_pwm->ctrl_lock);
+	val = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG);
+	val |= BIT_CH(PWM_EN, pwm->hwpwm);
+	val |= BIT_CH(PWM_CLK_GATING, pwm->hwpwm);
+	sun4i_pwm_writel(sun4i_pwm, val, PWM_CTRL_REG);
+	spin_unlock(&sun4i_pwm->ctrl_lock);
+
+	return 0;
+}
+
+static void sun4i_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct sun4i_pwm_chip *sun4i_pwm = to_sun4i_pwm_chip(chip);
+	u32 val;
+
+	spin_lock(&sun4i_pwm->ctrl_lock);
+	val = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG);
+	val &= ~BIT_CH(PWM_EN, pwm->hwpwm);
+	val &= ~BIT_CH(PWM_CLK_GATING, pwm->hwpwm);
+	sun4i_pwm_writel(sun4i_pwm, val, PWM_CTRL_REG);
+	spin_unlock(&sun4i_pwm->ctrl_lock);
+
+	clk_disable_unprepare(sun4i_pwm->clk);
+}
+
+static const struct pwm_ops sun4i_pwm_ops = {
+	.config = sun4i_pwm_config,
+	.set_polarity = sun4i_pwm_set_polarity,
+	.enable = sun4i_pwm_enable,
+	.disable = sun4i_pwm_disable,
+	.owner = THIS_MODULE,
+};
+
+static const struct sun4i_pwm_data sun4i_pwm_data_a10 = {
+	.has_prescaler_bypass = false,
+	.has_rdy = false,
+};
+
+static const struct sun4i_pwm_data sun4i_pwm_data_a20 = {
+	.has_prescaler_bypass = true,
+	.has_rdy = true,
+};
+
+static const struct of_device_id sun4i_pwm_dt_ids[] = {
+	{
+		.compatible = "allwinner,sun4i-a10-pwm",
+		.data = &sun4i_pwm_data_a10,
+	}, {
+		.compatible = "allwinner,sun7i-a20-pwm",
+		.data = &sun4i_pwm_data_a20,
+	}, {
+		/* sentinel */
+	},
+};
+MODULE_DEVICE_TABLE(of, sun4i_pwm_dt_ids);
+
+static int sun4i_pwm_probe(struct platform_device *pdev)
+{
+	struct sun4i_pwm_chip *pwm;
+	struct resource *res;
+	u32 val;
+	int i, ret;
+	const struct of_device_id *match;
+
+	match = of_match_device(sun4i_pwm_dt_ids, &pdev->dev);
+
+	pwm = devm_kzalloc(&pdev->dev, sizeof(*pwm), GFP_KERNEL);
+	if (!pwm)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	pwm->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(pwm->base))
+		return PTR_ERR(pwm->base);
+
+	pwm->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(pwm->clk))
+		return PTR_ERR(pwm->clk);
+
+	pwm->chip.dev = &pdev->dev;
+	pwm->chip.ops = &sun4i_pwm_ops;
+	pwm->chip.base = -1;
+	pwm->chip.npwm = 2;
+	pwm->chip.can_sleep = true;
+	pwm->chip.of_xlate = of_pwm_xlate_with_flags;
+	pwm->chip.of_pwm_n_cells = 3;
+	pwm->data = match->data;
+
+	spin_lock_init(&pwm->ctrl_lock);
+
+	ret = pwmchip_add(&pwm->chip);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to add PWM chip: %d\n", ret);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, pwm);
+
+	ret = clk_prepare_enable(pwm->clk);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to enable PWM clock\n");
+		goto clk_error;
+	}
+
+	val = sun4i_pwm_readl(pwm, PWM_CTRL_REG);
+	for (i = 0; i < pwm->chip.npwm; i++)
+		if (!(val & BIT_CH(PWM_ACT_STATE, i)))
+			pwm->chip.pwms[i].polarity = PWM_POLARITY_INVERSED;
+	clk_disable_unprepare(pwm->clk);
+
+	return 0;
+
+clk_error:
+	pwmchip_remove(&pwm->chip);
+	return ret;
+}
+
+static int sun4i_pwm_remove(struct platform_device *pdev)
+{
+	struct sun4i_pwm_chip *pwm = platform_get_drvdata(pdev);
+
+	return pwmchip_remove(&pwm->chip);
+}
+
+static struct platform_driver sun4i_pwm_driver = {
+	.driver = {
+		.name = "sun4i-pwm",
+		.of_match_table = sun4i_pwm_dt_ids,
+	},
+	.probe = sun4i_pwm_probe,
+	.remove = sun4i_pwm_remove,
+};
+module_platform_driver(sun4i_pwm_driver);
+
+MODULE_ALIAS("platform:sun4i-pwm");
+MODULE_AUTHOR("Alexandre Belloni <alexandre.belloni@free-electrons.com>");
+MODULE_DESCRIPTION("Allwinner sun4i PWM driver");
+MODULE_LICENSE("GPL v2");
diff --git a/kernel/drivers/pwm/pwm-tegra.c b/kernel/drivers/pwm/pwm-tegra.c
new file mode 100644
index 000000000..cabd7d8e0
--- /dev/null
+++ b/kernel/drivers/pwm/pwm-tegra.c
@@ -0,0 +1,250 @@
+/*
+ * drivers/pwm/pwm-tegra.c
+ *
+ * Tegra pulse-width-modulation controller driver
+ *
+ * Copyright (c) 2010, NVIDIA Corporation.
+ * Based on arch/arm/plat-mxc/pwm.c by Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/pwm.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#define PWM_ENABLE	(1 << 31)
+#define PWM_DUTY_WIDTH	8
+#define PWM_DUTY_SHIFT	16
+#define PWM_SCALE_WIDTH	13
+#define PWM_SCALE_SHIFT	0
+
+#define NUM_PWM 4
+
+struct tegra_pwm_chip {
+	struct pwm_chip		chip;
+	struct device		*dev;
+
+	struct clk		*clk;
+
+	void __iomem		*mmio_base;
+};
+
+static inline struct tegra_pwm_chip *to_tegra_pwm_chip(struct pwm_chip *chip)
+{
+	return container_of(chip, struct tegra_pwm_chip, chip);
+}
+
+static inline u32 pwm_readl(struct tegra_pwm_chip *chip, unsigned int num)
+{
+	return readl(chip->mmio_base + (num << 4));
+}
+
+static inline void pwm_writel(struct tegra_pwm_chip *chip, unsigned int num,
+			     unsigned long val)
+{
+	writel(val, chip->mmio_base + (num << 4));
+}
+
+static int tegra_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+			    int duty_ns, int period_ns)
+{
+	struct tegra_pwm_chip *pc = to_tegra_pwm_chip(chip);
+	unsigned long long c;
+	unsigned long rate, hz;
+	u32 val = 0;
+	int err;
+
+	/*
+	 * Convert from duty_ns / period_ns to a fixed number of duty ticks
+	 * per (1 << PWM_DUTY_WIDTH) cycles and make sure to round to the
+	 * nearest integer during division.
+	 */
+	c = duty_ns * ((1 << PWM_DUTY_WIDTH) - 1) + period_ns / 2;
+	do_div(c, period_ns);
+
+	val = (u32)c << PWM_DUTY_SHIFT;
+
+	/*
+	 * Compute the prescaler value for which (1 << PWM_DUTY_WIDTH)
+	 * cycles at the PWM clock rate will take period_ns nanoseconds.
+	 */
+	rate = clk_get_rate(pc->clk) >> PWM_DUTY_WIDTH;
+	hz = NSEC_PER_SEC / period_ns;
+
+	rate = (rate + (hz / 2)) / hz;
+
+	/*
+	 * Since the actual PWM divider is the register's frequency divider
+	 * field minus 1, we need to decrement to get the correct value to
+	 * write to the register.
+	 */
+	if (rate > 0)
+		rate--;
+
+	/*
+	 * Make sure that the rate will fit in the register's frequency
+	 * divider field.
+	 */
+	if (rate >> PWM_SCALE_WIDTH)
+		return -EINVAL;
+
+	val |= rate << PWM_SCALE_SHIFT;
+
+	/*
+	 * If the PWM channel is disabled, make sure to turn on the clock
+	 * before writing the register. Otherwise, keep it enabled.
+	 */
+	if (!test_bit(PWMF_ENABLED, &pwm->flags)) {
+		err = clk_prepare_enable(pc->clk);
+		if (err < 0)
+			return err;
+	} else
+		val |= PWM_ENABLE;
+
+	pwm_writel(pc, pwm->hwpwm, val);
+
+	/*
+	 * If the PWM is not enabled, turn the clock off again to save power.
+	 */
+	if (!test_bit(PWMF_ENABLED, &pwm->flags))
+		clk_disable_unprepare(pc->clk);
+
+	return 0;
+}
+
+static int tegra_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct tegra_pwm_chip *pc = to_tegra_pwm_chip(chip);
+	int rc = 0;
+	u32 val;
+
+	rc = clk_prepare_enable(pc->clk);
+	if (rc < 0)
+		return rc;
+
+	val = pwm_readl(pc, pwm->hwpwm);
+	val |= PWM_ENABLE;
+	pwm_writel(pc, pwm->hwpwm, val);
+
+	return 0;
+}
+
+static void tegra_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct tegra_pwm_chip *pc = to_tegra_pwm_chip(chip);
+	u32 val;
+
+	val = pwm_readl(pc, pwm->hwpwm);
+	val &= ~PWM_ENABLE;
+	pwm_writel(pc, pwm->hwpwm, val);
+
+	clk_disable_unprepare(pc->clk);
+}
+
+static const struct pwm_ops tegra_pwm_ops = {
+	.config = tegra_pwm_config,
+	.enable = tegra_pwm_enable,
+	.disable = tegra_pwm_disable,
+	.owner = THIS_MODULE,
+};
+
+static int tegra_pwm_probe(struct platform_device *pdev)
+{
+	struct tegra_pwm_chip *pwm;
+	struct resource *r;
+	int ret;
+
+	pwm = devm_kzalloc(&pdev->dev, sizeof(*pwm), GFP_KERNEL);
+	if (!pwm)
+		return -ENOMEM;
+
+	pwm->dev = &pdev->dev;
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	pwm->mmio_base = devm_ioremap_resource(&pdev->dev, r);
+	if (IS_ERR(pwm->mmio_base))
+		return PTR_ERR(pwm->mmio_base);
+
+	platform_set_drvdata(pdev, pwm);
+
+	pwm->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(pwm->clk))
+		return PTR_ERR(pwm->clk);
+
+	pwm->chip.dev = &pdev->dev;
+	pwm->chip.ops = &tegra_pwm_ops;
+	pwm->chip.base = -1;
+	pwm->chip.npwm = NUM_PWM;
+
+	ret = pwmchip_add(&pwm->chip);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int tegra_pwm_remove(struct platform_device *pdev)
+{
+	struct tegra_pwm_chip *pc = platform_get_drvdata(pdev);
+	int i;
+
+	if (WARN_ON(!pc))
+		return -ENODEV;
+
+	for (i = 0; i < NUM_PWM; i++) {
+		struct pwm_device *pwm = &pc->chip.pwms[i];
+
+		if (!test_bit(PWMF_ENABLED, &pwm->flags))
+			if (clk_prepare_enable(pc->clk) < 0)
+				continue;
+
+		pwm_writel(pc, i, 0);
+
+		clk_disable_unprepare(pc->clk);
+	}
+
+	return pwmchip_remove(&pc->chip);
+}
+
+static const struct of_device_id tegra_pwm_of_match[] = {
+	{ .compatible = "nvidia,tegra20-pwm" },
+	{ .compatible = "nvidia,tegra30-pwm" },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(of, tegra_pwm_of_match);
+
+static struct platform_driver tegra_pwm_driver = {
+	.driver = {
+		.name = "tegra-pwm",
+		.of_match_table = tegra_pwm_of_match,
+	},
+	.probe = tegra_pwm_probe,
+	.remove = tegra_pwm_remove,
+};
+
+module_platform_driver(tegra_pwm_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("NVIDIA Corporation");
+MODULE_ALIAS("platform:tegra-pwm");
diff --git a/kernel/drivers/pwm/pwm-tiecap.c b/kernel/drivers/pwm/pwm-tiecap.c
new file mode 100644
index 000000000..e557befdf
--- /dev/null
+++ b/kernel/drivers/pwm/pwm-tiecap.c
@@ -0,0 +1,345 @@
+/*
+ * ECAP PWM driver
+ *
+ * Copyright (C) 2012 Texas Instruments, Inc. - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/pm_runtime.h>
+#include <linux/pwm.h>
+#include <linux/of_device.h>
+
+#include "pwm-tipwmss.h"
+
+/* ECAP registers and bits definitions */
+#define CAP1			0x08
+#define CAP2			0x0C
+#define CAP3			0x10
+#define CAP4			0x14
+#define ECCTL2			0x2A
+#define ECCTL2_APWM_POL_LOW	BIT(10)
+#define ECCTL2_APWM_MODE	BIT(9)
+#define ECCTL2_SYNC_SEL_DISA	(BIT(7) | BIT(6))
+#define ECCTL2_TSCTR_FREERUN	BIT(4)
+
+struct ecap_context {
+	u32	cap3;
+	u32	cap4;
+	u16	ecctl2;
+};
+
+struct ecap_pwm_chip {
+	struct pwm_chip	chip;
+	unsigned int	clk_rate;
+	void __iomem	*mmio_base;
+	struct ecap_context ctx;
+};
+
+static inline struct ecap_pwm_chip *to_ecap_pwm_chip(struct pwm_chip *chip)
+{
+	return container_of(chip, struct ecap_pwm_chip, chip);
+}
+
+/*
+ * period_ns = 10^9 * period_cycles / PWM_CLK_RATE
+ * duty_ns   = 10^9 * duty_cycles / PWM_CLK_RATE
+ */
+static int ecap_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+		int duty_ns, int period_ns)
+{
+	struct ecap_pwm_chip *pc = to_ecap_pwm_chip(chip);
+	unsigned long long c;
+	unsigned long period_cycles, duty_cycles;
+	unsigned int reg_val;
+
+	if (period_ns > NSEC_PER_SEC)
+		return -ERANGE;
+
+	c = pc->clk_rate;
+	c = c * period_ns;
+	do_div(c, NSEC_PER_SEC);
+	period_cycles = (unsigned long)c;
+
+	if (period_cycles < 1) {
+		period_cycles = 1;
+		duty_cycles = 1;
+	} else {
+		c = pc->clk_rate;
+		c = c * duty_ns;
+		do_div(c, NSEC_PER_SEC);
+		duty_cycles = (unsigned long)c;
+	}
+
+	pm_runtime_get_sync(pc->chip.dev);
+
+	reg_val = readw(pc->mmio_base + ECCTL2);
+
+	/* Configure APWM mode & disable sync option */
+	reg_val |= ECCTL2_APWM_MODE | ECCTL2_SYNC_SEL_DISA;
+
+	writew(reg_val, pc->mmio_base + ECCTL2);
+
+	if (!test_bit(PWMF_ENABLED, &pwm->flags)) {
+		/* Update active registers if not running */
+		writel(duty_cycles, pc->mmio_base + CAP2);
+		writel(period_cycles, pc->mmio_base + CAP1);
+	} else {
+		/*
+		 * Update shadow registers to configure period and
+		 * compare values. This helps current PWM period to
+		 * complete on reconfiguring
+		 */
+		writel(duty_cycles, pc->mmio_base + CAP4);
+		writel(period_cycles, pc->mmio_base + CAP3);
+	}
+
+	if (!test_bit(PWMF_ENABLED, &pwm->flags)) {
+		reg_val = readw(pc->mmio_base + ECCTL2);
+		/* Disable APWM mode to put APWM output Low */
+		reg_val &= ~ECCTL2_APWM_MODE;
+		writew(reg_val, pc->mmio_base + ECCTL2);
+	}
+
+	pm_runtime_put_sync(pc->chip.dev);
+	return 0;
+}
+
+static int ecap_pwm_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm,
+		enum pwm_polarity polarity)
+{
+	struct ecap_pwm_chip *pc = to_ecap_pwm_chip(chip);
+	unsigned short reg_val;
+
+	pm_runtime_get_sync(pc->chip.dev);
+	reg_val = readw(pc->mmio_base + ECCTL2);
+	if (polarity == PWM_POLARITY_INVERSED)
+		/* Duty cycle defines LOW period of PWM */
+		reg_val |= ECCTL2_APWM_POL_LOW;
+	else
+		/* Duty cycle defines HIGH period of PWM */
+		reg_val &= ~ECCTL2_APWM_POL_LOW;
+
+	writew(reg_val, pc->mmio_base + ECCTL2);
+	pm_runtime_put_sync(pc->chip.dev);
+	return 0;
+}
+
+static int ecap_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct ecap_pwm_chip *pc = to_ecap_pwm_chip(chip);
+	unsigned int reg_val;
+
+	/* Leave clock enabled on enabling PWM */
+	pm_runtime_get_sync(pc->chip.dev);
+
+	/*
+	 * Enable 'Free run Time stamp counter mode' to start counter
+	 * and  'APWM mode' to enable APWM output
+	 */
+	reg_val = readw(pc->mmio_base + ECCTL2);
+	reg_val |= ECCTL2_TSCTR_FREERUN | ECCTL2_APWM_MODE;
+	writew(reg_val, pc->mmio_base + ECCTL2);
+	return 0;
+}
+
+static void ecap_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct ecap_pwm_chip *pc = to_ecap_pwm_chip(chip);
+	unsigned int reg_val;
+
+	/*
+	 * Disable 'Free run Time stamp counter mode' to stop counter
+	 * and 'APWM mode' to put APWM output to low
+	 */
+	reg_val = readw(pc->mmio_base + ECCTL2);
+	reg_val &= ~(ECCTL2_TSCTR_FREERUN | ECCTL2_APWM_MODE);
+	writew(reg_val, pc->mmio_base + ECCTL2);
+
+	/* Disable clock on PWM disable */
+	pm_runtime_put_sync(pc->chip.dev);
+}
+
+static void ecap_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	if (test_bit(PWMF_ENABLED, &pwm->flags)) {
+		dev_warn(chip->dev, "Removing PWM device without disabling\n");
+		pm_runtime_put_sync(chip->dev);
+	}
+}
+
+static const struct pwm_ops ecap_pwm_ops = {
+	.free		= ecap_pwm_free,
+	.config		= ecap_pwm_config,
+	.set_polarity	= ecap_pwm_set_polarity,
+	.enable		= ecap_pwm_enable,
+	.disable	= ecap_pwm_disable,
+	.owner		= THIS_MODULE,
+};
+
+static const struct of_device_id ecap_of_match[] = {
+	{ .compatible	= "ti,am33xx-ecap" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, ecap_of_match);
+
+static int ecap_pwm_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct resource *r;
+	struct clk *clk;
+	struct ecap_pwm_chip *pc;
+	u16 status;
+
+	pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL);
+	if (!pc)
+		return -ENOMEM;
+
+	clk = devm_clk_get(&pdev->dev, "fck");
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "failed to get clock\n");
+		return PTR_ERR(clk);
+	}
+
+	pc->clk_rate = clk_get_rate(clk);
+	if (!pc->clk_rate) {
+		dev_err(&pdev->dev, "failed to get clock rate\n");
+		return -EINVAL;
+	}
+
+	pc->chip.dev = &pdev->dev;
+	pc->chip.ops = &ecap_pwm_ops;
+	pc->chip.of_xlate = of_pwm_xlate_with_flags;
+	pc->chip.of_pwm_n_cells = 3;
+	pc->chip.base = -1;
+	pc->chip.npwm = 1;
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	pc->mmio_base = devm_ioremap_resource(&pdev->dev, r);
+	if (IS_ERR(pc->mmio_base))
+		return PTR_ERR(pc->mmio_base);
+
+	ret = pwmchip_add(&pc->chip);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
+		return ret;
+	}
+
+	pm_runtime_enable(&pdev->dev);
+	pm_runtime_get_sync(&pdev->dev);
+
+	status = pwmss_submodule_state_change(pdev->dev.parent,
+			PWMSS_ECAPCLK_EN);
+	if (!(status & PWMSS_ECAPCLK_EN_ACK)) {
+		dev_err(&pdev->dev, "PWMSS config space clock enable failed\n");
+		ret = -EINVAL;
+		goto pwmss_clk_failure;
+	}
+
+	pm_runtime_put_sync(&pdev->dev);
+
+	platform_set_drvdata(pdev, pc);
+	return 0;
+
+pwmss_clk_failure:
+	pm_runtime_put_sync(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+	pwmchip_remove(&pc->chip);
+	return ret;
+}
+
+static int ecap_pwm_remove(struct platform_device *pdev)
+{
+	struct ecap_pwm_chip *pc = platform_get_drvdata(pdev);
+
+	pm_runtime_get_sync(&pdev->dev);
+	/*
+	 * Due to hardware misbehaviour, acknowledge of the stop_req
+	 * is missing. Hence checking of the status bit skipped.
+	 */
+	pwmss_submodule_state_change(pdev->dev.parent, PWMSS_ECAPCLK_STOP_REQ);
+	pm_runtime_put_sync(&pdev->dev);
+
+	pm_runtime_disable(&pdev->dev);
+	return pwmchip_remove(&pc->chip);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static void ecap_pwm_save_context(struct ecap_pwm_chip *pc)
+{
+	pm_runtime_get_sync(pc->chip.dev);
+	pc->ctx.ecctl2 = readw(pc->mmio_base + ECCTL2);
+	pc->ctx.cap4 = readl(pc->mmio_base + CAP4);
+	pc->ctx.cap3 = readl(pc->mmio_base + CAP3);
+	pm_runtime_put_sync(pc->chip.dev);
+}
+
+static void ecap_pwm_restore_context(struct ecap_pwm_chip *pc)
+{
+	writel(pc->ctx.cap3, pc->mmio_base + CAP3);
+	writel(pc->ctx.cap4, pc->mmio_base + CAP4);
+	writew(pc->ctx.ecctl2, pc->mmio_base + ECCTL2);
+}
+
+static int ecap_pwm_suspend(struct device *dev)
+{
+	struct ecap_pwm_chip *pc = dev_get_drvdata(dev);
+	struct pwm_device *pwm = pc->chip.pwms;
+
+	ecap_pwm_save_context(pc);
+
+	/* Disable explicitly if PWM is running */
+	if (test_bit(PWMF_ENABLED, &pwm->flags))
+		pm_runtime_put_sync(dev);
+
+	return 0;
+}
+
+static int ecap_pwm_resume(struct device *dev)
+{
+	struct ecap_pwm_chip *pc = dev_get_drvdata(dev);
+	struct pwm_device *pwm = pc->chip.pwms;
+
+	/* Enable explicitly if PWM was running */
+	if (test_bit(PWMF_ENABLED, &pwm->flags))
+		pm_runtime_get_sync(dev);
+
+	ecap_pwm_restore_context(pc);
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(ecap_pwm_pm_ops, ecap_pwm_suspend, ecap_pwm_resume);
+
+static struct platform_driver ecap_pwm_driver = {
+	.driver = {
+		.name	= "ecap",
+		.of_match_table = ecap_of_match,
+		.pm	= &ecap_pwm_pm_ops,
+	},
+	.probe = ecap_pwm_probe,
+	.remove = ecap_pwm_remove,
+};
+
+module_platform_driver(ecap_pwm_driver);
+
+MODULE_DESCRIPTION("ECAP PWM driver");
+MODULE_AUTHOR("Texas Instruments");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/pwm/pwm-tiehrpwm.c b/kernel/drivers/pwm/pwm-tiehrpwm.c
new file mode 100644
index 000000000..694b3cf76
--- /dev/null
+++ b/kernel/drivers/pwm/pwm-tiehrpwm.c
@@ -0,0 +1,613 @@
+/*
+ * EHRPWM PWM driver
+ *
+ * Copyright (C) 2012 Texas Instruments, Inc. - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/pm_runtime.h>
+#include <linux/of_device.h>
+
+#include "pwm-tipwmss.h"
+
+/* EHRPWM registers and bits definitions */
+
+/* Time base module registers */
+#define TBCTL			0x00
+#define TBPRD			0x0A
+
+#define TBCTL_RUN_MASK		(BIT(15) | BIT(14))
+#define TBCTL_STOP_NEXT		0
+#define TBCTL_STOP_ON_CYCLE	BIT(14)
+#define TBCTL_FREE_RUN		(BIT(15) | BIT(14))
+#define TBCTL_PRDLD_MASK	BIT(3)
+#define TBCTL_PRDLD_SHDW	0
+#define TBCTL_PRDLD_IMDT	BIT(3)
+#define TBCTL_CLKDIV_MASK	(BIT(12) | BIT(11) | BIT(10) | BIT(9) | \
+				BIT(8) | BIT(7))
+#define TBCTL_CTRMODE_MASK	(BIT(1) | BIT(0))
+#define TBCTL_CTRMODE_UP	0
+#define TBCTL_CTRMODE_DOWN	BIT(0)
+#define TBCTL_CTRMODE_UPDOWN	BIT(1)
+#define TBCTL_CTRMODE_FREEZE	(BIT(1) | BIT(0))
+
+#define TBCTL_HSPCLKDIV_SHIFT	7
+#define TBCTL_CLKDIV_SHIFT	10
+
+#define CLKDIV_MAX		7
+#define HSPCLKDIV_MAX		7
+#define PERIOD_MAX		0xFFFF
+
+/* compare module registers */
+#define CMPA			0x12
+#define CMPB			0x14
+
+/* Action qualifier module registers */
+#define AQCTLA			0x16
+#define AQCTLB			0x18
+#define AQSFRC			0x1A
+#define AQCSFRC			0x1C
+
+#define AQCTL_CBU_MASK		(BIT(9) | BIT(8))
+#define AQCTL_CBU_FRCLOW	BIT(8)
+#define AQCTL_CBU_FRCHIGH	BIT(9)
+#define AQCTL_CBU_FRCTOGGLE	(BIT(9) | BIT(8))
+#define AQCTL_CAU_MASK		(BIT(5) | BIT(4))
+#define AQCTL_CAU_FRCLOW	BIT(4)
+#define AQCTL_CAU_FRCHIGH	BIT(5)
+#define AQCTL_CAU_FRCTOGGLE	(BIT(5) | BIT(4))
+#define AQCTL_PRD_MASK		(BIT(3) | BIT(2))
+#define AQCTL_PRD_FRCLOW	BIT(2)
+#define AQCTL_PRD_FRCHIGH	BIT(3)
+#define AQCTL_PRD_FRCTOGGLE	(BIT(3) | BIT(2))
+#define AQCTL_ZRO_MASK		(BIT(1) | BIT(0))
+#define AQCTL_ZRO_FRCLOW	BIT(0)
+#define AQCTL_ZRO_FRCHIGH	BIT(1)
+#define AQCTL_ZRO_FRCTOGGLE	(BIT(1) | BIT(0))
+
+#define AQCTL_CHANA_POLNORMAL	(AQCTL_CAU_FRCLOW | AQCTL_PRD_FRCHIGH | \
+				AQCTL_ZRO_FRCHIGH)
+#define AQCTL_CHANA_POLINVERSED	(AQCTL_CAU_FRCHIGH | AQCTL_PRD_FRCLOW | \
+				AQCTL_ZRO_FRCLOW)
+#define AQCTL_CHANB_POLNORMAL	(AQCTL_CBU_FRCLOW | AQCTL_PRD_FRCHIGH | \
+				AQCTL_ZRO_FRCHIGH)
+#define AQCTL_CHANB_POLINVERSED	(AQCTL_CBU_FRCHIGH | AQCTL_PRD_FRCLOW | \
+				AQCTL_ZRO_FRCLOW)
+
+#define AQSFRC_RLDCSF_MASK	(BIT(7) | BIT(6))
+#define AQSFRC_RLDCSF_ZRO	0
+#define AQSFRC_RLDCSF_PRD	BIT(6)
+#define AQSFRC_RLDCSF_ZROPRD	BIT(7)
+#define AQSFRC_RLDCSF_IMDT	(BIT(7) | BIT(6))
+
+#define AQCSFRC_CSFB_MASK	(BIT(3) | BIT(2))
+#define AQCSFRC_CSFB_FRCDIS	0
+#define AQCSFRC_CSFB_FRCLOW	BIT(2)
+#define AQCSFRC_CSFB_FRCHIGH	BIT(3)
+#define AQCSFRC_CSFB_DISSWFRC	(BIT(3) | BIT(2))
+#define AQCSFRC_CSFA_MASK	(BIT(1) | BIT(0))
+#define AQCSFRC_CSFA_FRCDIS	0
+#define AQCSFRC_CSFA_FRCLOW	BIT(0)
+#define AQCSFRC_CSFA_FRCHIGH	BIT(1)
+#define AQCSFRC_CSFA_DISSWFRC	(BIT(1) | BIT(0))
+
+#define NUM_PWM_CHANNEL		2	/* EHRPWM channels */
+
+struct ehrpwm_context {
+	u16 tbctl;
+	u16 tbprd;
+	u16 cmpa;
+	u16 cmpb;
+	u16 aqctla;
+	u16 aqctlb;
+	u16 aqsfrc;
+	u16 aqcsfrc;
+};
+
+struct ehrpwm_pwm_chip {
+	struct pwm_chip	chip;
+	unsigned int	clk_rate;
+	void __iomem	*mmio_base;
+	unsigned long period_cycles[NUM_PWM_CHANNEL];
+	enum pwm_polarity polarity[NUM_PWM_CHANNEL];
+	struct	clk	*tbclk;
+	struct ehrpwm_context ctx;
+};
+
+static inline struct ehrpwm_pwm_chip *to_ehrpwm_pwm_chip(struct pwm_chip *chip)
+{
+	return container_of(chip, struct ehrpwm_pwm_chip, chip);
+}
+
+static inline u16 ehrpwm_read(void __iomem *base, int offset)
+{
+	return readw(base + offset);
+}
+
+static inline void ehrpwm_write(void __iomem *base, int offset, unsigned int val)
+{
+	writew(val & 0xFFFF, base + offset);
+}
+
+static void ehrpwm_modify(void __iomem *base, int offset,
+		unsigned short mask, unsigned short val)
+{
+	unsigned short regval;
+
+	regval = readw(base + offset);
+	regval &= ~mask;
+	regval |= val & mask;
+	writew(regval, base + offset);
+}
+
+/**
+ * set_prescale_div -	Set up the prescaler divider function
+ * @rqst_prescaler:	prescaler value min
+ * @prescale_div:	prescaler value set
+ * @tb_clk_div:		Time Base Control prescaler bits
+ */
+static int set_prescale_div(unsigned long rqst_prescaler,
+		unsigned short *prescale_div, unsigned short *tb_clk_div)
+{
+	unsigned int clkdiv, hspclkdiv;
+
+	for (clkdiv = 0; clkdiv <= CLKDIV_MAX; clkdiv++) {
+		for (hspclkdiv = 0; hspclkdiv <= HSPCLKDIV_MAX; hspclkdiv++) {
+
+			/*
+			 * calculations for prescaler value :
+			 * prescale_div = HSPCLKDIVIDER * CLKDIVIDER.
+			 * HSPCLKDIVIDER =  2 ** hspclkdiv
+			 * CLKDIVIDER = (1),		if clkdiv == 0 *OR*
+			 *		(2 * clkdiv),	if clkdiv != 0
+			 *
+			 * Configure prescale_div value such that period
+			 * register value is less than 65535.
+			 */
+
+			*prescale_div = (1 << clkdiv) *
+					(hspclkdiv ? (hspclkdiv * 2) : 1);
+			if (*prescale_div > rqst_prescaler) {
+				*tb_clk_div = (clkdiv << TBCTL_CLKDIV_SHIFT) |
+					(hspclkdiv << TBCTL_HSPCLKDIV_SHIFT);
+				return 0;
+			}
+		}
+	}
+	return 1;
+}
+
+static void configure_polarity(struct ehrpwm_pwm_chip *pc, int chan)
+{
+	int aqctl_reg;
+	unsigned short aqctl_val, aqctl_mask;
+
+	/*
+	 * Configure PWM output to HIGH/LOW level on counter
+	 * reaches compare register value and LOW/HIGH level
+	 * on counter value reaches period register value and
+	 * zero value on counter
+	 */
+	if (chan == 1) {
+		aqctl_reg = AQCTLB;
+		aqctl_mask = AQCTL_CBU_MASK;
+
+		if (pc->polarity[chan] == PWM_POLARITY_INVERSED)
+			aqctl_val = AQCTL_CHANB_POLINVERSED;
+		else
+			aqctl_val = AQCTL_CHANB_POLNORMAL;
+	} else {
+		aqctl_reg = AQCTLA;
+		aqctl_mask = AQCTL_CAU_MASK;
+
+		if (pc->polarity[chan] == PWM_POLARITY_INVERSED)
+			aqctl_val = AQCTL_CHANA_POLINVERSED;
+		else
+			aqctl_val = AQCTL_CHANA_POLNORMAL;
+	}
+
+	aqctl_mask |= AQCTL_PRD_MASK | AQCTL_ZRO_MASK;
+	ehrpwm_modify(pc->mmio_base, aqctl_reg, aqctl_mask, aqctl_val);
+}
+
+/*
+ * period_ns = 10^9 * (ps_divval * period_cycles) / PWM_CLK_RATE
+ * duty_ns   = 10^9 * (ps_divval * duty_cycles) / PWM_CLK_RATE
+ */
+static int ehrpwm_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+		int duty_ns, int period_ns)
+{
+	struct ehrpwm_pwm_chip *pc = to_ehrpwm_pwm_chip(chip);
+	unsigned long long c;
+	unsigned long period_cycles, duty_cycles;
+	unsigned short ps_divval, tb_divval;
+	int i, cmp_reg;
+
+	if (period_ns > NSEC_PER_SEC)
+		return -ERANGE;
+
+	c = pc->clk_rate;
+	c = c * period_ns;
+	do_div(c, NSEC_PER_SEC);
+	period_cycles = (unsigned long)c;
+
+	if (period_cycles < 1) {
+		period_cycles = 1;
+		duty_cycles = 1;
+	} else {
+		c = pc->clk_rate;
+		c = c * duty_ns;
+		do_div(c, NSEC_PER_SEC);
+		duty_cycles = (unsigned long)c;
+	}
+
+	/*
+	 * Period values should be same for multiple PWM channels as IP uses
+	 * same period register for multiple channels.
+	 */
+	for (i = 0; i < NUM_PWM_CHANNEL; i++) {
+		if (pc->period_cycles[i] &&
+				(pc->period_cycles[i] != period_cycles)) {
+			/*
+			 * Allow channel to reconfigure period if no other
+			 * channels being configured.
+			 */
+			if (i == pwm->hwpwm)
+				continue;
+
+			dev_err(chip->dev, "Period value conflicts with channel %d\n",
+					i);
+			return -EINVAL;
+		}
+	}
+
+	pc->period_cycles[pwm->hwpwm] = period_cycles;
+
+	/* Configure clock prescaler to support Low frequency PWM wave */
+	if (set_prescale_div(period_cycles/PERIOD_MAX, &ps_divval,
+				&tb_divval)) {
+		dev_err(chip->dev, "Unsupported values\n");
+		return -EINVAL;
+	}
+
+	pm_runtime_get_sync(chip->dev);
+
+	/* Update clock prescaler values */
+	ehrpwm_modify(pc->mmio_base, TBCTL, TBCTL_CLKDIV_MASK, tb_divval);
+
+	/* Update period & duty cycle with presacler division */
+	period_cycles = period_cycles / ps_divval;
+	duty_cycles = duty_cycles / ps_divval;
+
+	/* Configure shadow loading on Period register */
+	ehrpwm_modify(pc->mmio_base, TBCTL, TBCTL_PRDLD_MASK, TBCTL_PRDLD_SHDW);
+
+	ehrpwm_write(pc->mmio_base, TBPRD, period_cycles);
+
+	/* Configure ehrpwm counter for up-count mode */
+	ehrpwm_modify(pc->mmio_base, TBCTL, TBCTL_CTRMODE_MASK,
+			TBCTL_CTRMODE_UP);
+
+	if (pwm->hwpwm == 1)
+		/* Channel 1 configured with compare B register */
+		cmp_reg = CMPB;
+	else
+		/* Channel 0 configured with compare A register */
+		cmp_reg = CMPA;
+
+	ehrpwm_write(pc->mmio_base, cmp_reg, duty_cycles);
+
+	pm_runtime_put_sync(chip->dev);
+	return 0;
+}
+
+static int ehrpwm_pwm_set_polarity(struct pwm_chip *chip,
+		struct pwm_device *pwm,	enum pwm_polarity polarity)
+{
+	struct ehrpwm_pwm_chip *pc = to_ehrpwm_pwm_chip(chip);
+
+	/* Configuration of polarity in hardware delayed, do at enable */
+	pc->polarity[pwm->hwpwm] = polarity;
+	return 0;
+}
+
+static int ehrpwm_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct ehrpwm_pwm_chip *pc = to_ehrpwm_pwm_chip(chip);
+	unsigned short aqcsfrc_val, aqcsfrc_mask;
+	int ret;
+
+	/* Leave clock enabled on enabling PWM */
+	pm_runtime_get_sync(chip->dev);
+
+	/* Disabling Action Qualifier on PWM output */
+	if (pwm->hwpwm) {
+		aqcsfrc_val = AQCSFRC_CSFB_FRCDIS;
+		aqcsfrc_mask = AQCSFRC_CSFB_MASK;
+	} else {
+		aqcsfrc_val = AQCSFRC_CSFA_FRCDIS;
+		aqcsfrc_mask = AQCSFRC_CSFA_MASK;
+	}
+
+	/* Changes to shadow mode */
+	ehrpwm_modify(pc->mmio_base, AQSFRC, AQSFRC_RLDCSF_MASK,
+			AQSFRC_RLDCSF_ZRO);
+
+	ehrpwm_modify(pc->mmio_base, AQCSFRC, aqcsfrc_mask, aqcsfrc_val);
+
+	/* Channels polarity can be configured from action qualifier module */
+	configure_polarity(pc, pwm->hwpwm);
+
+	/* Enable TBCLK before enabling PWM device */
+	ret = clk_enable(pc->tbclk);
+	if (ret) {
+		dev_err(chip->dev, "Failed to enable TBCLK for %s\n",
+			dev_name(pc->chip.dev));
+		return ret;
+	}
+
+	/* Enable time counter for free_run */
+	ehrpwm_modify(pc->mmio_base, TBCTL, TBCTL_RUN_MASK, TBCTL_FREE_RUN);
+	return 0;
+}
+
+static void ehrpwm_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct ehrpwm_pwm_chip *pc = to_ehrpwm_pwm_chip(chip);
+	unsigned short aqcsfrc_val, aqcsfrc_mask;
+
+	/* Action Qualifier puts PWM output low forcefully */
+	if (pwm->hwpwm) {
+		aqcsfrc_val = AQCSFRC_CSFB_FRCLOW;
+		aqcsfrc_mask = AQCSFRC_CSFB_MASK;
+	} else {
+		aqcsfrc_val = AQCSFRC_CSFA_FRCLOW;
+		aqcsfrc_mask = AQCSFRC_CSFA_MASK;
+	}
+
+	/*
+	 * Changes to immediate action on Action Qualifier. This puts
+	 * Action Qualifier control on PWM output from next TBCLK
+	 */
+	ehrpwm_modify(pc->mmio_base, AQSFRC, AQSFRC_RLDCSF_MASK,
+			AQSFRC_RLDCSF_IMDT);
+
+	ehrpwm_modify(pc->mmio_base, AQCSFRC, aqcsfrc_mask, aqcsfrc_val);
+
+	/* Disabling TBCLK on PWM disable */
+	clk_disable(pc->tbclk);
+
+	/* Stop Time base counter */
+	ehrpwm_modify(pc->mmio_base, TBCTL, TBCTL_RUN_MASK, TBCTL_STOP_NEXT);
+
+	/* Disable clock on PWM disable */
+	pm_runtime_put_sync(chip->dev);
+}
+
+static void ehrpwm_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct ehrpwm_pwm_chip *pc = to_ehrpwm_pwm_chip(chip);
+
+	if (test_bit(PWMF_ENABLED, &pwm->flags)) {
+		dev_warn(chip->dev, "Removing PWM device without disabling\n");
+		pm_runtime_put_sync(chip->dev);
+	}
+
+	/* set period value to zero on free */
+	pc->period_cycles[pwm->hwpwm] = 0;
+}
+
+static const struct pwm_ops ehrpwm_pwm_ops = {
+	.free		= ehrpwm_pwm_free,
+	.config		= ehrpwm_pwm_config,
+	.set_polarity	= ehrpwm_pwm_set_polarity,
+	.enable		= ehrpwm_pwm_enable,
+	.disable	= ehrpwm_pwm_disable,
+	.owner		= THIS_MODULE,
+};
+
+static const struct of_device_id ehrpwm_of_match[] = {
+	{ .compatible	= "ti,am33xx-ehrpwm" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, ehrpwm_of_match);
+
+static int ehrpwm_pwm_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct resource *r;
+	struct clk *clk;
+	struct ehrpwm_pwm_chip *pc;
+	u16 status;
+
+	pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL);
+	if (!pc)
+		return -ENOMEM;
+
+	clk = devm_clk_get(&pdev->dev, "fck");
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "failed to get clock\n");
+		return PTR_ERR(clk);
+	}
+
+	pc->clk_rate = clk_get_rate(clk);
+	if (!pc->clk_rate) {
+		dev_err(&pdev->dev, "failed to get clock rate\n");
+		return -EINVAL;
+	}
+
+	pc->chip.dev = &pdev->dev;
+	pc->chip.ops = &ehrpwm_pwm_ops;
+	pc->chip.of_xlate = of_pwm_xlate_with_flags;
+	pc->chip.of_pwm_n_cells = 3;
+	pc->chip.base = -1;
+	pc->chip.npwm = NUM_PWM_CHANNEL;
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	pc->mmio_base = devm_ioremap_resource(&pdev->dev, r);
+	if (IS_ERR(pc->mmio_base))
+		return PTR_ERR(pc->mmio_base);
+
+	/* Acquire tbclk for Time Base EHRPWM submodule */
+	pc->tbclk = devm_clk_get(&pdev->dev, "tbclk");
+	if (IS_ERR(pc->tbclk)) {
+		dev_err(&pdev->dev, "Failed to get tbclk\n");
+		return PTR_ERR(pc->tbclk);
+	}
+
+	ret = clk_prepare(pc->tbclk);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "clk_prepare() failed: %d\n", ret);
+		return ret;
+	}
+
+	ret = pwmchip_add(&pc->chip);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
+		return ret;
+	}
+
+	pm_runtime_enable(&pdev->dev);
+	pm_runtime_get_sync(&pdev->dev);
+
+	status = pwmss_submodule_state_change(pdev->dev.parent,
+			PWMSS_EPWMCLK_EN);
+	if (!(status & PWMSS_EPWMCLK_EN_ACK)) {
+		dev_err(&pdev->dev, "PWMSS config space clock enable failed\n");
+		ret = -EINVAL;
+		goto pwmss_clk_failure;
+	}
+
+	pm_runtime_put_sync(&pdev->dev);
+
+	platform_set_drvdata(pdev, pc);
+	return 0;
+
+pwmss_clk_failure:
+	pm_runtime_put_sync(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+	pwmchip_remove(&pc->chip);
+	clk_unprepare(pc->tbclk);
+	return ret;
+}
+
+static int ehrpwm_pwm_remove(struct platform_device *pdev)
+{
+	struct ehrpwm_pwm_chip *pc = platform_get_drvdata(pdev);
+
+	clk_unprepare(pc->tbclk);
+
+	pm_runtime_get_sync(&pdev->dev);
+	/*
+	 * Due to hardware misbehaviour, acknowledge of the stop_req
+	 * is missing. Hence checking of the status bit skipped.
+	 */
+	pwmss_submodule_state_change(pdev->dev.parent, PWMSS_EPWMCLK_STOP_REQ);
+	pm_runtime_put_sync(&pdev->dev);
+
+	pm_runtime_put_sync(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+	return pwmchip_remove(&pc->chip);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static void ehrpwm_pwm_save_context(struct ehrpwm_pwm_chip *pc)
+{
+	pm_runtime_get_sync(pc->chip.dev);
+	pc->ctx.tbctl = ehrpwm_read(pc->mmio_base, TBCTL);
+	pc->ctx.tbprd = ehrpwm_read(pc->mmio_base, TBPRD);
+	pc->ctx.cmpa = ehrpwm_read(pc->mmio_base, CMPA);
+	pc->ctx.cmpb = ehrpwm_read(pc->mmio_base, CMPB);
+	pc->ctx.aqctla = ehrpwm_read(pc->mmio_base, AQCTLA);
+	pc->ctx.aqctlb = ehrpwm_read(pc->mmio_base, AQCTLB);
+	pc->ctx.aqsfrc = ehrpwm_read(pc->mmio_base, AQSFRC);
+	pc->ctx.aqcsfrc = ehrpwm_read(pc->mmio_base, AQCSFRC);
+	pm_runtime_put_sync(pc->chip.dev);
+}
+
+static void ehrpwm_pwm_restore_context(struct ehrpwm_pwm_chip *pc)
+{
+	ehrpwm_write(pc->mmio_base, TBPRD, pc->ctx.tbprd);
+	ehrpwm_write(pc->mmio_base, CMPA, pc->ctx.cmpa);
+	ehrpwm_write(pc->mmio_base, CMPB, pc->ctx.cmpb);
+	ehrpwm_write(pc->mmio_base, AQCTLA, pc->ctx.aqctla);
+	ehrpwm_write(pc->mmio_base, AQCTLB, pc->ctx.aqctlb);
+	ehrpwm_write(pc->mmio_base, AQSFRC, pc->ctx.aqsfrc);
+	ehrpwm_write(pc->mmio_base, AQCSFRC, pc->ctx.aqcsfrc);
+	ehrpwm_write(pc->mmio_base, TBCTL, pc->ctx.tbctl);
+}
+
+static int ehrpwm_pwm_suspend(struct device *dev)
+{
+	struct ehrpwm_pwm_chip *pc = dev_get_drvdata(dev);
+	int i;
+
+	ehrpwm_pwm_save_context(pc);
+	for (i = 0; i < pc->chip.npwm; i++) {
+		struct pwm_device *pwm = &pc->chip.pwms[i];
+
+		if (!test_bit(PWMF_ENABLED, &pwm->flags))
+			continue;
+
+		/* Disable explicitly if PWM is running */
+		pm_runtime_put_sync(dev);
+	}
+	return 0;
+}
+
+static int ehrpwm_pwm_resume(struct device *dev)
+{
+	struct ehrpwm_pwm_chip *pc = dev_get_drvdata(dev);
+	int i;
+
+	for (i = 0; i < pc->chip.npwm; i++) {
+		struct pwm_device *pwm = &pc->chip.pwms[i];
+
+		if (!test_bit(PWMF_ENABLED, &pwm->flags))
+			continue;
+
+		/* Enable explicitly if PWM was running */
+		pm_runtime_get_sync(dev);
+	}
+	ehrpwm_pwm_restore_context(pc);
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(ehrpwm_pwm_pm_ops, ehrpwm_pwm_suspend,
+		ehrpwm_pwm_resume);
+
+static struct platform_driver ehrpwm_pwm_driver = {
+	.driver = {
+		.name	= "ehrpwm",
+		.of_match_table = ehrpwm_of_match,
+		.pm	= &ehrpwm_pwm_pm_ops,
+	},
+	.probe = ehrpwm_pwm_probe,
+	.remove = ehrpwm_pwm_remove,
+};
+
+module_platform_driver(ehrpwm_pwm_driver);
+
+MODULE_DESCRIPTION("EHRPWM PWM driver");
+MODULE_AUTHOR("Texas Instruments");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/pwm/pwm-tipwmss.c b/kernel/drivers/pwm/pwm-tipwmss.c
new file mode 100644
index 000000000..5cf65a15d
--- /dev/null
+++ b/kernel/drivers/pwm/pwm-tipwmss.c
@@ -0,0 +1,133 @@
+/*
+ * TI PWM Subsystem driver
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/pm_runtime.h>
+#include <linux/of_device.h>
+
+#include "pwm-tipwmss.h"
+
+#define PWMSS_CLKCONFIG		0x8	/* Clock gating reg */
+#define PWMSS_CLKSTATUS		0xc	/* Clock gating status reg */
+
+struct pwmss_info {
+	void __iomem	*mmio_base;
+	struct mutex	pwmss_lock;
+	u16		pwmss_clkconfig;
+};
+
+u16 pwmss_submodule_state_change(struct device *dev, int set)
+{
+	struct pwmss_info *info = dev_get_drvdata(dev);
+	u16 val;
+
+	mutex_lock(&info->pwmss_lock);
+	val = readw(info->mmio_base + PWMSS_CLKCONFIG);
+	val |= set;
+	writew(val , info->mmio_base + PWMSS_CLKCONFIG);
+	mutex_unlock(&info->pwmss_lock);
+
+	return readw(info->mmio_base + PWMSS_CLKSTATUS);
+}
+EXPORT_SYMBOL(pwmss_submodule_state_change);
+
+static const struct of_device_id pwmss_of_match[] = {
+	{ .compatible	= "ti,am33xx-pwmss" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, pwmss_of_match);
+
+static int pwmss_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct resource *r;
+	struct pwmss_info *info;
+	struct device_node *node = pdev->dev.of_node;
+
+	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	mutex_init(&info->pwmss_lock);
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	info->mmio_base = devm_ioremap_resource(&pdev->dev, r);
+	if (IS_ERR(info->mmio_base))
+		return PTR_ERR(info->mmio_base);
+
+	pm_runtime_enable(&pdev->dev);
+	pm_runtime_get_sync(&pdev->dev);
+	platform_set_drvdata(pdev, info);
+
+	/* Populate all the child nodes here... */
+	ret = of_platform_populate(node, NULL, NULL, &pdev->dev);
+	if (ret)
+		dev_err(&pdev->dev, "no child node found\n");
+
+	return ret;
+}
+
+static int pwmss_remove(struct platform_device *pdev)
+{
+	struct pwmss_info *info = platform_get_drvdata(pdev);
+
+	pm_runtime_put_sync(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+	mutex_destroy(&info->pwmss_lock);
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int pwmss_suspend(struct device *dev)
+{
+	struct pwmss_info *info = dev_get_drvdata(dev);
+
+	info->pwmss_clkconfig = readw(info->mmio_base + PWMSS_CLKCONFIG);
+	pm_runtime_put_sync(dev);
+	return 0;
+}
+
+static int pwmss_resume(struct device *dev)
+{
+	struct pwmss_info *info = dev_get_drvdata(dev);
+
+	pm_runtime_get_sync(dev);
+	writew(info->pwmss_clkconfig, info->mmio_base + PWMSS_CLKCONFIG);
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(pwmss_pm_ops, pwmss_suspend, pwmss_resume);
+
+static struct platform_driver pwmss_driver = {
+	.driver	= {
+		.name	= "pwmss",
+		.pm	= &pwmss_pm_ops,
+		.of_match_table	= pwmss_of_match,
+	},
+	.probe	= pwmss_probe,
+	.remove	= pwmss_remove,
+};
+
+module_platform_driver(pwmss_driver);
+
+MODULE_DESCRIPTION("PWM Subsystem driver");
+MODULE_AUTHOR("Texas Instruments");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/pwm/pwm-tipwmss.h b/kernel/drivers/pwm/pwm-tipwmss.h
new file mode 100644
index 000000000..10ad80404
--- /dev/null
+++ b/kernel/drivers/pwm/pwm-tipwmss.h
@@ -0,0 +1,39 @@
+/*
+ * TI PWM Subsystem driver
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __TIPWMSS_H
+#define __TIPWMSS_H
+
+/* PWM substem clock gating */
+#define PWMSS_ECAPCLK_EN	BIT(0)
+#define PWMSS_ECAPCLK_STOP_REQ	BIT(1)
+#define PWMSS_EPWMCLK_EN	BIT(8)
+#define PWMSS_EPWMCLK_STOP_REQ	BIT(9)
+
+#define PWMSS_ECAPCLK_EN_ACK	BIT(0)
+#define PWMSS_EPWMCLK_EN_ACK	BIT(8)
+
+#ifdef CONFIG_PWM_TIPWMSS
+extern u16 pwmss_submodule_state_change(struct device *dev, int set);
+#else
+static inline u16 pwmss_submodule_state_change(struct device *dev, int set)
+{
+	/* return success status value */
+	return 0xFFFF;
+}
+#endif
+#endif	/* __TIPWMSS_H */
diff --git a/kernel/drivers/pwm/pwm-twl-led.c b/kernel/drivers/pwm/pwm-twl-led.c
new file mode 100644
index 000000000..b96447002
--- /dev/null
+++ b/kernel/drivers/pwm/pwm-twl-led.c
@@ -0,0 +1,348 @@
+/*
+ * Driver for TWL4030/6030 Pulse Width Modulator used as LED driver
+ *
+ * Copyright (C) 2012 Texas Instruments
+ * Author: Peter Ujfalusi <peter.ujfalusi@ti.com>
+ *
+ * This driver is a complete rewrite of the former pwm-twl6030.c authorded by:
+ * Hemanth V <hemanthv@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/i2c/twl.h>
+#include <linux/slab.h>
+
+/*
+ * This driver handles the PWM driven LED terminals of TWL4030 and TWL6030.
+ * To generate the signal on TWL4030:
+ *  - LEDA uses PWMA
+ *  - LEDB uses PWMB
+ * TWL6030 has one LED pin with dedicated LEDPWM
+ */
+
+#define TWL4030_LED_MAX		0x7f
+#define TWL6030_LED_MAX		0xff
+
+/* Registers, bits and macro for TWL4030 */
+#define TWL4030_LEDEN_REG	0x00
+#define TWL4030_PWMA_REG	0x01
+
+#define TWL4030_LEDXON		(1 << 0)
+#define TWL4030_LEDXPWM		(1 << 4)
+#define TWL4030_LED_PINS	(TWL4030_LEDXON | TWL4030_LEDXPWM)
+#define TWL4030_LED_TOGGLE(led, x)	((x) << (led))
+
+/* Register, bits and macro for TWL6030 */
+#define TWL6030_LED_PWM_CTRL1	0xf4
+#define TWL6030_LED_PWM_CTRL2	0xf5
+
+#define TWL6040_LED_MODE_HW	0x00
+#define TWL6040_LED_MODE_ON	0x01
+#define TWL6040_LED_MODE_OFF	0x02
+#define TWL6040_LED_MODE_MASK	0x03
+
+struct twl_pwmled_chip {
+	struct pwm_chip chip;
+	struct mutex mutex;
+};
+
+static inline struct twl_pwmled_chip *to_twl(struct pwm_chip *chip)
+{
+	return container_of(chip, struct twl_pwmled_chip, chip);
+}
+
+static int twl4030_pwmled_config(struct pwm_chip *chip, struct pwm_device *pwm,
+			      int duty_ns, int period_ns)
+{
+	int duty_cycle = DIV_ROUND_UP(duty_ns * TWL4030_LED_MAX, period_ns) + 1;
+	u8 pwm_config[2] = { 1, 0 };
+	int base, ret;
+
+	/*
+	 * To configure the duty period:
+	 * On-cycle is set to 1 (the minimum allowed value)
+	 * The off time of 0 is not configurable, so the mapping is:
+	 * 0 -> off cycle = 2,
+	 * 1 -> off cycle = 2,
+	 * 2 -> off cycle = 3,
+	 * 126 - > off cycle 127,
+	 * 127 - > off cycle 1
+	 * When on cycle == off cycle the PWM will be always on
+	 */
+	if (duty_cycle == 1)
+		duty_cycle = 2;
+	else if (duty_cycle > TWL4030_LED_MAX)
+		duty_cycle = 1;
+
+	base = pwm->hwpwm * 2 + TWL4030_PWMA_REG;
+
+	pwm_config[1] = duty_cycle;
+
+	ret = twl_i2c_write(TWL4030_MODULE_LED, pwm_config, base, 2);
+	if (ret < 0)
+		dev_err(chip->dev, "%s: Failed to configure PWM\n", pwm->label);
+
+	return ret;
+}
+
+static int twl4030_pwmled_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct twl_pwmled_chip *twl = to_twl(chip);
+	int ret;
+	u8 val;
+
+	mutex_lock(&twl->mutex);
+	ret = twl_i2c_read_u8(TWL4030_MODULE_LED, &val, TWL4030_LEDEN_REG);
+	if (ret < 0) {
+		dev_err(chip->dev, "%s: Failed to read LEDEN\n", pwm->label);
+		goto out;
+	}
+
+	val |= TWL4030_LED_TOGGLE(pwm->hwpwm, TWL4030_LED_PINS);
+
+	ret = twl_i2c_write_u8(TWL4030_MODULE_LED, val, TWL4030_LEDEN_REG);
+	if (ret < 0)
+		dev_err(chip->dev, "%s: Failed to enable PWM\n", pwm->label);
+
+out:
+	mutex_unlock(&twl->mutex);
+	return ret;
+}
+
+static void twl4030_pwmled_disable(struct pwm_chip *chip,
+				   struct pwm_device *pwm)
+{
+	struct twl_pwmled_chip *twl = to_twl(chip);
+	int ret;
+	u8 val;
+
+	mutex_lock(&twl->mutex);
+	ret = twl_i2c_read_u8(TWL4030_MODULE_LED, &val, TWL4030_LEDEN_REG);
+	if (ret < 0) {
+		dev_err(chip->dev, "%s: Failed to read LEDEN\n", pwm->label);
+		goto out;
+	}
+
+	val &= ~TWL4030_LED_TOGGLE(pwm->hwpwm, TWL4030_LED_PINS);
+
+	ret = twl_i2c_write_u8(TWL4030_MODULE_LED, val, TWL4030_LEDEN_REG);
+	if (ret < 0)
+		dev_err(chip->dev, "%s: Failed to disable PWM\n", pwm->label);
+
+out:
+	mutex_unlock(&twl->mutex);
+}
+
+static int twl6030_pwmled_config(struct pwm_chip *chip, struct pwm_device *pwm,
+			      int duty_ns, int period_ns)
+{
+	int duty_cycle = (duty_ns * TWL6030_LED_MAX) / period_ns;
+	u8 on_time;
+	int ret;
+
+	on_time = duty_cycle & 0xff;
+
+	ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, on_time,
+			       TWL6030_LED_PWM_CTRL1);
+	if (ret < 0)
+		dev_err(chip->dev, "%s: Failed to configure PWM\n", pwm->label);
+
+	return ret;
+}
+
+static int twl6030_pwmled_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct twl_pwmled_chip *twl = to_twl(chip);
+	int ret;
+	u8 val;
+
+	mutex_lock(&twl->mutex);
+	ret = twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, TWL6030_LED_PWM_CTRL2);
+	if (ret < 0) {
+		dev_err(chip->dev, "%s: Failed to read PWM_CTRL2\n",
+			pwm->label);
+		goto out;
+	}
+
+	val &= ~TWL6040_LED_MODE_MASK;
+	val |= TWL6040_LED_MODE_ON;
+
+	ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_LED_PWM_CTRL2);
+	if (ret < 0)
+		dev_err(chip->dev, "%s: Failed to enable PWM\n", pwm->label);
+
+out:
+	mutex_unlock(&twl->mutex);
+	return ret;
+}
+
+static void twl6030_pwmled_disable(struct pwm_chip *chip,
+				   struct pwm_device *pwm)
+{
+	struct twl_pwmled_chip *twl = to_twl(chip);
+	int ret;
+	u8 val;
+
+	mutex_lock(&twl->mutex);
+	ret = twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, TWL6030_LED_PWM_CTRL2);
+	if (ret < 0) {
+		dev_err(chip->dev, "%s: Failed to read PWM_CTRL2\n",
+			pwm->label);
+		goto out;
+	}
+
+	val &= ~TWL6040_LED_MODE_MASK;
+	val |= TWL6040_LED_MODE_OFF;
+
+	ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_LED_PWM_CTRL2);
+	if (ret < 0)
+		dev_err(chip->dev, "%s: Failed to disable PWM\n", pwm->label);
+
+out:
+	mutex_unlock(&twl->mutex);
+}
+
+static int twl6030_pwmled_request(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct twl_pwmled_chip *twl = to_twl(chip);
+	int ret;
+	u8 val;
+
+	mutex_lock(&twl->mutex);
+	ret = twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, TWL6030_LED_PWM_CTRL2);
+	if (ret < 0) {
+		dev_err(chip->dev, "%s: Failed to read PWM_CTRL2\n",
+			pwm->label);
+		goto out;
+	}
+
+	val &= ~TWL6040_LED_MODE_MASK;
+	val |= TWL6040_LED_MODE_OFF;
+
+	ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_LED_PWM_CTRL2);
+	if (ret < 0)
+		dev_err(chip->dev, "%s: Failed to request PWM\n", pwm->label);
+
+out:
+	mutex_unlock(&twl->mutex);
+	return ret;
+}
+
+static void twl6030_pwmled_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct twl_pwmled_chip *twl = to_twl(chip);
+	int ret;
+	u8 val;
+
+	mutex_lock(&twl->mutex);
+	ret = twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, TWL6030_LED_PWM_CTRL2);
+	if (ret < 0) {
+		dev_err(chip->dev, "%s: Failed to read PWM_CTRL2\n",
+			pwm->label);
+		goto out;
+	}
+
+	val &= ~TWL6040_LED_MODE_MASK;
+	val |= TWL6040_LED_MODE_HW;
+
+	ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_LED_PWM_CTRL2);
+	if (ret < 0)
+		dev_err(chip->dev, "%s: Failed to free PWM\n", pwm->label);
+
+out:
+	mutex_unlock(&twl->mutex);
+}
+
+static const struct pwm_ops twl4030_pwmled_ops = {
+	.enable = twl4030_pwmled_enable,
+	.disable = twl4030_pwmled_disable,
+	.config = twl4030_pwmled_config,
+	.owner = THIS_MODULE,
+};
+
+static const struct pwm_ops twl6030_pwmled_ops = {
+	.enable = twl6030_pwmled_enable,
+	.disable = twl6030_pwmled_disable,
+	.config = twl6030_pwmled_config,
+	.request = twl6030_pwmled_request,
+	.free = twl6030_pwmled_free,
+	.owner = THIS_MODULE,
+};
+
+static int twl_pwmled_probe(struct platform_device *pdev)
+{
+	struct twl_pwmled_chip *twl;
+	int ret;
+
+	twl = devm_kzalloc(&pdev->dev, sizeof(*twl), GFP_KERNEL);
+	if (!twl)
+		return -ENOMEM;
+
+	if (twl_class_is_4030()) {
+		twl->chip.ops = &twl4030_pwmled_ops;
+		twl->chip.npwm = 2;
+	} else {
+		twl->chip.ops = &twl6030_pwmled_ops;
+		twl->chip.npwm = 1;
+	}
+
+	twl->chip.dev = &pdev->dev;
+	twl->chip.base = -1;
+	twl->chip.can_sleep = true;
+
+	mutex_init(&twl->mutex);
+
+	ret = pwmchip_add(&twl->chip);
+	if (ret < 0)
+		return ret;
+
+	platform_set_drvdata(pdev, twl);
+
+	return 0;
+}
+
+static int twl_pwmled_remove(struct platform_device *pdev)
+{
+	struct twl_pwmled_chip *twl = platform_get_drvdata(pdev);
+
+	return pwmchip_remove(&twl->chip);
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id twl_pwmled_of_match[] = {
+	{ .compatible = "ti,twl4030-pwmled" },
+	{ .compatible = "ti,twl6030-pwmled" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, twl_pwmled_of_match);
+#endif
+
+static struct platform_driver twl_pwmled_driver = {
+	.driver = {
+		.name = "twl-pwmled",
+		.of_match_table = of_match_ptr(twl_pwmled_of_match),
+	},
+	.probe = twl_pwmled_probe,
+	.remove = twl_pwmled_remove,
+};
+module_platform_driver(twl_pwmled_driver);
+
+MODULE_AUTHOR("Peter Ujfalusi <peter.ujfalusi@ti.com>");
+MODULE_DESCRIPTION("PWM driver for TWL4030 and TWL6030 LED outputs");
+MODULE_ALIAS("platform:twl-pwmled");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/pwm/pwm-twl.c b/kernel/drivers/pwm/pwm-twl.c
new file mode 100644
index 000000000..04f76725d
--- /dev/null
+++ b/kernel/drivers/pwm/pwm-twl.c
@@ -0,0 +1,352 @@
+/*
+ * Driver for TWL4030/6030 Generic Pulse Width Modulator
+ *
+ * Copyright (C) 2012 Texas Instruments
+ * Author: Peter Ujfalusi <peter.ujfalusi@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/i2c/twl.h>
+#include <linux/slab.h>
+
+/*
+ * This driver handles the PWMs of TWL4030 and TWL6030.
+ * The TRM names for the PWMs on TWL4030 are: PWM0, PWM1
+ * TWL6030 also have two PWMs named in the TRM as PWM1, PWM2
+ */
+
+#define TWL_PWM_MAX		0x7f
+
+/* Registers, bits and macro for TWL4030 */
+#define TWL4030_GPBR1_REG	0x0c
+#define TWL4030_PMBR1_REG	0x0d
+
+/* GPBR1 register bits */
+#define TWL4030_PWMXCLK_ENABLE	(1 << 0)
+#define TWL4030_PWMX_ENABLE	(1 << 2)
+#define TWL4030_PWMX_BITS	(TWL4030_PWMX_ENABLE | TWL4030_PWMXCLK_ENABLE)
+#define TWL4030_PWM_TOGGLE(pwm, x)	((x) << (pwm))
+
+/* PMBR1 register bits */
+#define TWL4030_GPIO6_PWM0_MUTE_MASK		(0x03 << 2)
+#define TWL4030_GPIO6_PWM0_MUTE_PWM0		(0x01 << 2)
+#define TWL4030_GPIO7_VIBRASYNC_PWM1_MASK	(0x03 << 4)
+#define TWL4030_GPIO7_VIBRASYNC_PWM1_PWM1	(0x03 << 4)
+
+/* Register, bits and macro for TWL6030 */
+#define TWL6030_TOGGLE3_REG	0x92
+
+#define TWL6030_PWMXR		(1 << 0)
+#define TWL6030_PWMXS		(1 << 1)
+#define TWL6030_PWMXEN		(1 << 2)
+#define TWL6030_PWM_TOGGLE(pwm, x)	((x) << (pwm * 3))
+
+struct twl_pwm_chip {
+	struct pwm_chip chip;
+	struct mutex mutex;
+	u8 twl6030_toggle3;
+	u8 twl4030_pwm_mux;
+};
+
+static inline struct twl_pwm_chip *to_twl(struct pwm_chip *chip)
+{
+	return container_of(chip, struct twl_pwm_chip, chip);
+}
+
+static int twl_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+			      int duty_ns, int period_ns)
+{
+	int duty_cycle = DIV_ROUND_UP(duty_ns * TWL_PWM_MAX, period_ns) + 1;
+	u8 pwm_config[2] = { 1, 0 };
+	int base, ret;
+
+	/*
+	 * To configure the duty period:
+	 * On-cycle is set to 1 (the minimum allowed value)
+	 * The off time of 0 is not configurable, so the mapping is:
+	 * 0 -> off cycle = 2,
+	 * 1 -> off cycle = 2,
+	 * 2 -> off cycle = 3,
+	 * 126 - > off cycle 127,
+	 * 127 - > off cycle 1
+	 * When on cycle == off cycle the PWM will be always on
+	 */
+	if (duty_cycle == 1)
+		duty_cycle = 2;
+	else if (duty_cycle > TWL_PWM_MAX)
+		duty_cycle = 1;
+
+	base = pwm->hwpwm * 3;
+
+	pwm_config[1] = duty_cycle;
+
+	ret = twl_i2c_write(TWL_MODULE_PWM, pwm_config, base, 2);
+	if (ret < 0)
+		dev_err(chip->dev, "%s: Failed to configure PWM\n", pwm->label);
+
+	return ret;
+}
+
+static int twl4030_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct twl_pwm_chip *twl = to_twl(chip);
+	int ret;
+	u8 val;
+
+	mutex_lock(&twl->mutex);
+	ret = twl_i2c_read_u8(TWL4030_MODULE_INTBR, &val, TWL4030_GPBR1_REG);
+	if (ret < 0) {
+		dev_err(chip->dev, "%s: Failed to read GPBR1\n", pwm->label);
+		goto out;
+	}
+
+	val |= TWL4030_PWM_TOGGLE(pwm->hwpwm, TWL4030_PWMXCLK_ENABLE);
+
+	ret = twl_i2c_write_u8(TWL4030_MODULE_INTBR, val, TWL4030_GPBR1_REG);
+	if (ret < 0)
+		dev_err(chip->dev, "%s: Failed to enable PWM\n", pwm->label);
+
+	val |= TWL4030_PWM_TOGGLE(pwm->hwpwm, TWL4030_PWMX_ENABLE);
+
+	ret = twl_i2c_write_u8(TWL4030_MODULE_INTBR, val, TWL4030_GPBR1_REG);
+	if (ret < 0)
+		dev_err(chip->dev, "%s: Failed to enable PWM\n", pwm->label);
+
+out:
+	mutex_unlock(&twl->mutex);
+	return ret;
+}
+
+static void twl4030_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct twl_pwm_chip *twl = to_twl(chip);
+	int ret;
+	u8 val;
+
+	mutex_lock(&twl->mutex);
+	ret = twl_i2c_read_u8(TWL4030_MODULE_INTBR, &val, TWL4030_GPBR1_REG);
+	if (ret < 0) {
+		dev_err(chip->dev, "%s: Failed to read GPBR1\n", pwm->label);
+		goto out;
+	}
+
+	val &= ~TWL4030_PWM_TOGGLE(pwm->hwpwm, TWL4030_PWMX_ENABLE);
+
+	ret = twl_i2c_write_u8(TWL4030_MODULE_INTBR, val, TWL4030_GPBR1_REG);
+	if (ret < 0)
+		dev_err(chip->dev, "%s: Failed to disable PWM\n", pwm->label);
+
+	val &= ~TWL4030_PWM_TOGGLE(pwm->hwpwm, TWL4030_PWMXCLK_ENABLE);
+
+	ret = twl_i2c_write_u8(TWL4030_MODULE_INTBR, val, TWL4030_GPBR1_REG);
+	if (ret < 0)
+		dev_err(chip->dev, "%s: Failed to disable PWM\n", pwm->label);
+
+out:
+	mutex_unlock(&twl->mutex);
+}
+
+static int twl4030_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct twl_pwm_chip *twl = to_twl(chip);
+	int ret;
+	u8 val, mask, bits;
+
+	if (pwm->hwpwm == 1) {
+		mask = TWL4030_GPIO7_VIBRASYNC_PWM1_MASK;
+		bits = TWL4030_GPIO7_VIBRASYNC_PWM1_PWM1;
+	} else {
+		mask = TWL4030_GPIO6_PWM0_MUTE_MASK;
+		bits = TWL4030_GPIO6_PWM0_MUTE_PWM0;
+	}
+
+	mutex_lock(&twl->mutex);
+	ret = twl_i2c_read_u8(TWL4030_MODULE_INTBR, &val, TWL4030_PMBR1_REG);
+	if (ret < 0) {
+		dev_err(chip->dev, "%s: Failed to read PMBR1\n", pwm->label);
+		goto out;
+	}
+
+	/* Save the current MUX configuration for the PWM */
+	twl->twl4030_pwm_mux &= ~mask;
+	twl->twl4030_pwm_mux |= (val & mask);
+
+	/* Select PWM functionality */
+	val &= ~mask;
+	val |= bits;
+
+	ret = twl_i2c_write_u8(TWL4030_MODULE_INTBR, val, TWL4030_PMBR1_REG);
+	if (ret < 0)
+		dev_err(chip->dev, "%s: Failed to request PWM\n", pwm->label);
+
+out:
+	mutex_unlock(&twl->mutex);
+	return ret;
+}
+
+static void twl4030_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct twl_pwm_chip *twl = to_twl(chip);
+	int ret;
+	u8 val, mask;
+
+	if (pwm->hwpwm == 1)
+		mask = TWL4030_GPIO7_VIBRASYNC_PWM1_MASK;
+	else
+		mask = TWL4030_GPIO6_PWM0_MUTE_MASK;
+
+	mutex_lock(&twl->mutex);
+	ret = twl_i2c_read_u8(TWL4030_MODULE_INTBR, &val, TWL4030_PMBR1_REG);
+	if (ret < 0) {
+		dev_err(chip->dev, "%s: Failed to read PMBR1\n", pwm->label);
+		goto out;
+	}
+
+	/* Restore the MUX configuration for the PWM */
+	val &= ~mask;
+	val |= (twl->twl4030_pwm_mux & mask);
+
+	ret = twl_i2c_write_u8(TWL4030_MODULE_INTBR, val, TWL4030_PMBR1_REG);
+	if (ret < 0)
+		dev_err(chip->dev, "%s: Failed to free PWM\n", pwm->label);
+
+out:
+	mutex_unlock(&twl->mutex);
+}
+
+static int twl6030_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct twl_pwm_chip *twl = to_twl(chip);
+	int ret;
+	u8 val;
+
+	mutex_lock(&twl->mutex);
+	val = twl->twl6030_toggle3;
+	val |= TWL6030_PWM_TOGGLE(pwm->hwpwm, TWL6030_PWMXS | TWL6030_PWMXEN);
+	val &= ~TWL6030_PWM_TOGGLE(pwm->hwpwm, TWL6030_PWMXR);
+
+	ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_TOGGLE3_REG);
+	if (ret < 0) {
+		dev_err(chip->dev, "%s: Failed to enable PWM\n", pwm->label);
+		goto out;
+	}
+
+	twl->twl6030_toggle3 = val;
+out:
+	mutex_unlock(&twl->mutex);
+	return ret;
+}
+
+static void twl6030_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct twl_pwm_chip *twl = to_twl(chip);
+	int ret;
+	u8 val;
+
+	mutex_lock(&twl->mutex);
+	val = twl->twl6030_toggle3;
+	val |= TWL6030_PWM_TOGGLE(pwm->hwpwm, TWL6030_PWMXR);
+	val &= ~TWL6030_PWM_TOGGLE(pwm->hwpwm, TWL6030_PWMXS | TWL6030_PWMXEN);
+
+	ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_TOGGLE3_REG);
+	if (ret < 0) {
+		dev_err(chip->dev, "%s: Failed to disable PWM\n", pwm->label);
+		goto out;
+	}
+
+	twl->twl6030_toggle3 = val;
+out:
+	mutex_unlock(&twl->mutex);
+}
+
+static const struct pwm_ops twl4030_pwm_ops = {
+	.config = twl_pwm_config,
+	.enable = twl4030_pwm_enable,
+	.disable = twl4030_pwm_disable,
+	.request = twl4030_pwm_request,
+	.free = twl4030_pwm_free,
+	.owner = THIS_MODULE,
+};
+
+static const struct pwm_ops twl6030_pwm_ops = {
+	.config = twl_pwm_config,
+	.enable = twl6030_pwm_enable,
+	.disable = twl6030_pwm_disable,
+	.owner = THIS_MODULE,
+};
+
+static int twl_pwm_probe(struct platform_device *pdev)
+{
+	struct twl_pwm_chip *twl;
+	int ret;
+
+	twl = devm_kzalloc(&pdev->dev, sizeof(*twl), GFP_KERNEL);
+	if (!twl)
+		return -ENOMEM;
+
+	if (twl_class_is_4030())
+		twl->chip.ops = &twl4030_pwm_ops;
+	else
+		twl->chip.ops = &twl6030_pwm_ops;
+
+	twl->chip.dev = &pdev->dev;
+	twl->chip.base = -1;
+	twl->chip.npwm = 2;
+	twl->chip.can_sleep = true;
+
+	mutex_init(&twl->mutex);
+
+	ret = pwmchip_add(&twl->chip);
+	if (ret < 0)
+		return ret;
+
+	platform_set_drvdata(pdev, twl);
+
+	return 0;
+}
+
+static int twl_pwm_remove(struct platform_device *pdev)
+{
+	struct twl_pwm_chip *twl = platform_get_drvdata(pdev);
+
+	return pwmchip_remove(&twl->chip);
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id twl_pwm_of_match[] = {
+	{ .compatible = "ti,twl4030-pwm" },
+	{ .compatible = "ti,twl6030-pwm" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, twl_pwm_of_match);
+#endif
+
+static struct platform_driver twl_pwm_driver = {
+	.driver = {
+		.name = "twl-pwm",
+		.of_match_table = of_match_ptr(twl_pwm_of_match),
+	},
+	.probe = twl_pwm_probe,
+	.remove = twl_pwm_remove,
+};
+module_platform_driver(twl_pwm_driver);
+
+MODULE_AUTHOR("Peter Ujfalusi <peter.ujfalusi@ti.com>");
+MODULE_DESCRIPTION("PWM driver for TWL4030 and TWL6030");
+MODULE_ALIAS("platform:twl-pwm");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/pwm/pwm-vt8500.c b/kernel/drivers/pwm/pwm-vt8500.c
new file mode 100644
index 000000000..cdb58fd46
--- /dev/null
+++ b/kernel/drivers/pwm/pwm-vt8500.c
@@ -0,0 +1,276 @@
+/*
+ * drivers/pwm/pwm-vt8500.c
+ *
+ * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/pwm.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+
+#include <asm/div64.h>
+
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_address.h>
+
+/*
+ * SoC architecture allocates register space for 4 PWMs but only
+ * 2 are currently implemented.
+ */
+#define VT8500_NR_PWMS	2
+
+#define REG_CTRL(pwm)		(((pwm) << 4) + 0x00)
+#define REG_SCALAR(pwm)		(((pwm) << 4) + 0x04)
+#define REG_PERIOD(pwm)		(((pwm) << 4) + 0x08)
+#define REG_DUTY(pwm)		(((pwm) << 4) + 0x0C)
+#define REG_STATUS		0x40
+
+#define CTRL_ENABLE		BIT(0)
+#define CTRL_INVERT		BIT(1)
+#define CTRL_AUTOLOAD		BIT(2)
+#define CTRL_STOP_IMM		BIT(3)
+#define CTRL_LOAD_PRESCALE	BIT(4)
+#define CTRL_LOAD_PERIOD	BIT(5)
+
+#define STATUS_CTRL_UPDATE	BIT(0)
+#define STATUS_SCALAR_UPDATE	BIT(1)
+#define STATUS_PERIOD_UPDATE	BIT(2)
+#define STATUS_DUTY_UPDATE	BIT(3)
+#define STATUS_ALL_UPDATE	0x0F
+
+struct vt8500_chip {
+	struct pwm_chip chip;
+	void __iomem *base;
+	struct clk *clk;
+};
+
+#define to_vt8500_chip(chip)	container_of(chip, struct vt8500_chip, chip)
+
+#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
+static inline void pwm_busy_wait(struct vt8500_chip *vt8500, int nr, u8 bitmask)
+{
+	int loops = msecs_to_loops(10);
+	u32 mask = bitmask << (nr << 8);
+
+	while ((readl(vt8500->base + REG_STATUS) & mask) && --loops)
+		cpu_relax();
+
+	if (unlikely(!loops))
+		dev_warn(vt8500->chip.dev, "Waiting for status bits 0x%x to clear timed out\n",
+			 mask);
+}
+
+static int vt8500_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+		int duty_ns, int period_ns)
+{
+	struct vt8500_chip *vt8500 = to_vt8500_chip(chip);
+	unsigned long long c;
+	unsigned long period_cycles, prescale, pv, dc;
+	int err;
+	u32 val;
+
+	err = clk_enable(vt8500->clk);
+	if (err < 0) {
+		dev_err(chip->dev, "failed to enable clock\n");
+		return err;
+	}
+
+	c = clk_get_rate(vt8500->clk);
+	c = c * period_ns;
+	do_div(c, 1000000000);
+	period_cycles = c;
+
+	if (period_cycles < 1)
+		period_cycles = 1;
+	prescale = (period_cycles - 1) / 4096;
+	pv = period_cycles / (prescale + 1) - 1;
+	if (pv > 4095)
+		pv = 4095;
+
+	if (prescale > 1023) {
+		clk_disable(vt8500->clk);
+		return -EINVAL;
+	}
+
+	c = (unsigned long long)pv * duty_ns;
+	do_div(c, period_ns);
+	dc = c;
+
+	writel(prescale, vt8500->base + REG_SCALAR(pwm->hwpwm));
+	pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_SCALAR_UPDATE);
+
+	writel(pv, vt8500->base + REG_PERIOD(pwm->hwpwm));
+	pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_PERIOD_UPDATE);
+
+	writel(dc, vt8500->base + REG_DUTY(pwm->hwpwm));
+	pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_DUTY_UPDATE);
+
+	val = readl(vt8500->base + REG_CTRL(pwm->hwpwm));
+	val |= CTRL_AUTOLOAD;
+	writel(val, vt8500->base + REG_CTRL(pwm->hwpwm));
+	pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_CTRL_UPDATE);
+
+	clk_disable(vt8500->clk);
+	return 0;
+}
+
+static int vt8500_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct vt8500_chip *vt8500 = to_vt8500_chip(chip);
+	int err;
+	u32 val;
+
+	err = clk_enable(vt8500->clk);
+	if (err < 0) {
+		dev_err(chip->dev, "failed to enable clock\n");
+		return err;
+	}
+
+	val = readl(vt8500->base + REG_CTRL(pwm->hwpwm));
+	val |= CTRL_ENABLE;
+	writel(val, vt8500->base + REG_CTRL(pwm->hwpwm));
+	pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_CTRL_UPDATE);
+
+	return 0;
+}
+
+static void vt8500_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct vt8500_chip *vt8500 = to_vt8500_chip(chip);
+	u32 val;
+
+	val = readl(vt8500->base + REG_CTRL(pwm->hwpwm));
+	val &= ~CTRL_ENABLE;
+	writel(val, vt8500->base + REG_CTRL(pwm->hwpwm));
+	pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_CTRL_UPDATE);
+
+	clk_disable(vt8500->clk);
+}
+
+static int vt8500_pwm_set_polarity(struct pwm_chip *chip,
+				   struct pwm_device *pwm,
+				   enum pwm_polarity polarity)
+{
+	struct vt8500_chip *vt8500 = to_vt8500_chip(chip);
+	u32 val;
+
+	val = readl(vt8500->base + REG_CTRL(pwm->hwpwm));
+
+	if (polarity == PWM_POLARITY_INVERSED)
+		val |= CTRL_INVERT;
+	else
+		val &= ~CTRL_INVERT;
+
+	writel(val, vt8500->base + REG_CTRL(pwm->hwpwm));
+	pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_CTRL_UPDATE);
+
+	return 0;
+}
+
+static struct pwm_ops vt8500_pwm_ops = {
+	.enable = vt8500_pwm_enable,
+	.disable = vt8500_pwm_disable,
+	.config = vt8500_pwm_config,
+	.set_polarity = vt8500_pwm_set_polarity,
+	.owner = THIS_MODULE,
+};
+
+static const struct of_device_id vt8500_pwm_dt_ids[] = {
+	{ .compatible = "via,vt8500-pwm", },
+	{ /* Sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, vt8500_pwm_dt_ids);
+
+static int vt8500_pwm_probe(struct platform_device *pdev)
+{
+	struct vt8500_chip *chip;
+	struct resource *r;
+	struct device_node *np = pdev->dev.of_node;
+	int ret;
+
+	if (!np) {
+		dev_err(&pdev->dev, "invalid devicetree node\n");
+		return -EINVAL;
+	}
+
+	chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
+	if (chip == NULL)
+		return -ENOMEM;
+
+	chip->chip.dev = &pdev->dev;
+	chip->chip.ops = &vt8500_pwm_ops;
+	chip->chip.of_xlate = of_pwm_xlate_with_flags;
+	chip->chip.of_pwm_n_cells = 3;
+	chip->chip.base = -1;
+	chip->chip.npwm = VT8500_NR_PWMS;
+
+	chip->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(chip->clk)) {
+		dev_err(&pdev->dev, "clock source not specified\n");
+		return PTR_ERR(chip->clk);
+	}
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	chip->base = devm_ioremap_resource(&pdev->dev, r);
+	if (IS_ERR(chip->base))
+		return PTR_ERR(chip->base);
+
+	ret = clk_prepare(chip->clk);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to prepare clock\n");
+		return ret;
+	}
+
+	ret = pwmchip_add(&chip->chip);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to add PWM chip\n");
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, chip);
+	return ret;
+}
+
+static int vt8500_pwm_remove(struct platform_device *pdev)
+{
+	struct vt8500_chip *chip;
+
+	chip = platform_get_drvdata(pdev);
+	if (chip == NULL)
+		return -ENODEV;
+
+	clk_unprepare(chip->clk);
+
+	return pwmchip_remove(&chip->chip);
+}
+
+static struct platform_driver vt8500_pwm_driver = {
+	.probe		= vt8500_pwm_probe,
+	.remove		= vt8500_pwm_remove,
+	.driver		= {
+		.name	= "vt8500-pwm",
+		.of_match_table = vt8500_pwm_dt_ids,
+	},
+};
+module_platform_driver(vt8500_pwm_driver);
+
+MODULE_DESCRIPTION("VT8500 PWM Driver");
+MODULE_AUTHOR("Tony Prisk <linux@prisktech.co.nz>");
+MODULE_LICENSE("GPL v2");
diff --git a/kernel/drivers/pwm/sysfs.c b/kernel/drivers/pwm/sysfs.c
new file mode 100644
index 000000000..4bd0c639e
--- /dev/null
+++ b/kernel/drivers/pwm/sysfs.c
@@ -0,0 +1,347 @@
+/*
+ * A simple sysfs interface for the generic PWM framework
+ *
+ * Copyright (C) 2013 H Hartley Sweeten <hsweeten@visionengravers.com>
+ *
+ * Based on previous work by Lars Poeschel <poeschel@lemonage.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/device.h>
+#include <linux/mutex.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/kdev_t.h>
+#include <linux/pwm.h>
+
+struct pwm_export {
+	struct device child;
+	struct pwm_device *pwm;
+};
+
+static struct pwm_export *child_to_pwm_export(struct device *child)
+{
+	return container_of(child, struct pwm_export, child);
+}
+
+static struct pwm_device *child_to_pwm_device(struct device *child)
+{
+	struct pwm_export *export = child_to_pwm_export(child);
+
+	return export->pwm;
+}
+
+static ssize_t pwm_period_show(struct device *child,
+			       struct device_attribute *attr,
+			       char *buf)
+{
+	const struct pwm_device *pwm = child_to_pwm_device(child);
+
+	return sprintf(buf, "%u\n", pwm->period);
+}
+
+static ssize_t pwm_period_store(struct device *child,
+				struct device_attribute *attr,
+				const char *buf, size_t size)
+{
+	struct pwm_device *pwm = child_to_pwm_device(child);
+	unsigned int val;
+	int ret;
+
+	ret = kstrtouint(buf, 0, &val);
+	if (ret)
+		return ret;
+
+	ret = pwm_config(pwm, pwm->duty_cycle, val);
+
+	return ret ? : size;
+}
+
+static ssize_t pwm_duty_cycle_show(struct device *child,
+				   struct device_attribute *attr,
+				   char *buf)
+{
+	const struct pwm_device *pwm = child_to_pwm_device(child);
+
+	return sprintf(buf, "%u\n", pwm->duty_cycle);
+}
+
+static ssize_t pwm_duty_cycle_store(struct device *child,
+				    struct device_attribute *attr,
+				    const char *buf, size_t size)
+{
+	struct pwm_device *pwm = child_to_pwm_device(child);
+	unsigned int val;
+	int ret;
+
+	ret = kstrtouint(buf, 0, &val);
+	if (ret)
+		return ret;
+
+	ret = pwm_config(pwm, val, pwm->period);
+
+	return ret ? : size;
+}
+
+static ssize_t pwm_enable_show(struct device *child,
+			       struct device_attribute *attr,
+			       char *buf)
+{
+	const struct pwm_device *pwm = child_to_pwm_device(child);
+	int enabled = test_bit(PWMF_ENABLED, &pwm->flags);
+
+	return sprintf(buf, "%d\n", enabled);
+}
+
+static ssize_t pwm_enable_store(struct device *child,
+				struct device_attribute *attr,
+				const char *buf, size_t size)
+{
+	struct pwm_device *pwm = child_to_pwm_device(child);
+	int val, ret;
+
+	ret = kstrtoint(buf, 0, &val);
+	if (ret)
+		return ret;
+
+	switch (val) {
+	case 0:
+		pwm_disable(pwm);
+		break;
+	case 1:
+		ret = pwm_enable(pwm);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	return ret ? : size;
+}
+
+static ssize_t pwm_polarity_show(struct device *child,
+				 struct device_attribute *attr,
+				 char *buf)
+{
+	const struct pwm_device *pwm = child_to_pwm_device(child);
+
+	return sprintf(buf, "%s\n", pwm->polarity ? "inversed" : "normal");
+}
+
+static ssize_t pwm_polarity_store(struct device *child,
+				  struct device_attribute *attr,
+				  const char *buf, size_t size)
+{
+	struct pwm_device *pwm = child_to_pwm_device(child);
+	enum pwm_polarity polarity;
+	int ret;
+
+	if (sysfs_streq(buf, "normal"))
+		polarity = PWM_POLARITY_NORMAL;
+	else if (sysfs_streq(buf, "inversed"))
+		polarity = PWM_POLARITY_INVERSED;
+	else
+		return -EINVAL;
+
+	ret = pwm_set_polarity(pwm, polarity);
+
+	return ret ? : size;
+}
+
+static DEVICE_ATTR(period, 0644, pwm_period_show, pwm_period_store);
+static DEVICE_ATTR(duty_cycle, 0644, pwm_duty_cycle_show, pwm_duty_cycle_store);
+static DEVICE_ATTR(enable, 0644, pwm_enable_show, pwm_enable_store);
+static DEVICE_ATTR(polarity, 0644, pwm_polarity_show, pwm_polarity_store);
+
+static struct attribute *pwm_attrs[] = {
+	&dev_attr_period.attr,
+	&dev_attr_duty_cycle.attr,
+	&dev_attr_enable.attr,
+	&dev_attr_polarity.attr,
+	NULL
+};
+ATTRIBUTE_GROUPS(pwm);
+
+static void pwm_export_release(struct device *child)
+{
+	struct pwm_export *export = child_to_pwm_export(child);
+
+	kfree(export);
+}
+
+static int pwm_export_child(struct device *parent, struct pwm_device *pwm)
+{
+	struct pwm_export *export;
+	int ret;
+
+	if (test_and_set_bit(PWMF_EXPORTED, &pwm->flags))
+		return -EBUSY;
+
+	export = kzalloc(sizeof(*export), GFP_KERNEL);
+	if (!export) {
+		clear_bit(PWMF_EXPORTED, &pwm->flags);
+		return -ENOMEM;
+	}
+
+	export->pwm = pwm;
+
+	export->child.release = pwm_export_release;
+	export->child.parent = parent;
+	export->child.devt = MKDEV(0, 0);
+	export->child.groups = pwm_groups;
+	dev_set_name(&export->child, "pwm%u", pwm->hwpwm);
+
+	ret = device_register(&export->child);
+	if (ret) {
+		clear_bit(PWMF_EXPORTED, &pwm->flags);
+		kfree(export);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int pwm_unexport_match(struct device *child, void *data)
+{
+	return child_to_pwm_device(child) == data;
+}
+
+static int pwm_unexport_child(struct device *parent, struct pwm_device *pwm)
+{
+	struct device *child;
+
+	if (!test_and_clear_bit(PWMF_EXPORTED, &pwm->flags))
+		return -ENODEV;
+
+	child = device_find_child(parent, pwm, pwm_unexport_match);
+	if (!child)
+		return -ENODEV;
+
+	/* for device_find_child() */
+	put_device(child);
+	device_unregister(child);
+	pwm_put(pwm);
+
+	return 0;
+}
+
+static ssize_t pwm_export_store(struct device *parent,
+				struct device_attribute *attr,
+				const char *buf, size_t len)
+{
+	struct pwm_chip *chip = dev_get_drvdata(parent);
+	struct pwm_device *pwm;
+	unsigned int hwpwm;
+	int ret;
+
+	ret = kstrtouint(buf, 0, &hwpwm);
+	if (ret < 0)
+		return ret;
+
+	if (hwpwm >= chip->npwm)
+		return -ENODEV;
+
+	pwm = pwm_request_from_chip(chip, hwpwm, "sysfs");
+	if (IS_ERR(pwm))
+		return PTR_ERR(pwm);
+
+	ret = pwm_export_child(parent, pwm);
+	if (ret < 0)
+		pwm_put(pwm);
+
+	return ret ? : len;
+}
+static DEVICE_ATTR(export, 0200, NULL, pwm_export_store);
+
+static ssize_t pwm_unexport_store(struct device *parent,
+				  struct device_attribute *attr,
+				  const char *buf, size_t len)
+{
+	struct pwm_chip *chip = dev_get_drvdata(parent);
+	unsigned int hwpwm;
+	int ret;
+
+	ret = kstrtouint(buf, 0, &hwpwm);
+	if (ret < 0)
+		return ret;
+
+	if (hwpwm >= chip->npwm)
+		return -ENODEV;
+
+	ret = pwm_unexport_child(parent, &chip->pwms[hwpwm]);
+
+	return ret ? : len;
+}
+static DEVICE_ATTR(unexport, 0200, NULL, pwm_unexport_store);
+
+static ssize_t npwm_show(struct device *parent, struct device_attribute *attr,
+			 char *buf)
+{
+	const struct pwm_chip *chip = dev_get_drvdata(parent);
+
+	return sprintf(buf, "%u\n", chip->npwm);
+}
+static DEVICE_ATTR_RO(npwm);
+
+static struct attribute *pwm_chip_attrs[] = {
+	&dev_attr_export.attr,
+	&dev_attr_unexport.attr,
+	&dev_attr_npwm.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(pwm_chip);
+
+static struct class pwm_class = {
+	.name		= "pwm",
+	.owner		= THIS_MODULE,
+	.dev_groups	= pwm_chip_groups,
+};
+
+static int pwmchip_sysfs_match(struct device *parent, const void *data)
+{
+	return dev_get_drvdata(parent) == data;
+}
+
+void pwmchip_sysfs_export(struct pwm_chip *chip)
+{
+	struct device *parent;
+
+	/*
+	 * If device_create() fails the pwm_chip is still usable by
+	 * the kernel its just not exported.
+	 */
+	parent = device_create(&pwm_class, chip->dev, MKDEV(0, 0), chip,
+			       "pwmchip%d", chip->base);
+	if (IS_ERR(parent)) {
+		dev_warn(chip->dev,
+			 "device_create failed for pwm_chip sysfs export\n");
+	}
+}
+
+void pwmchip_sysfs_unexport(struct pwm_chip *chip)
+{
+	struct device *parent;
+
+	parent = class_find_device(&pwm_class, NULL, chip,
+				   pwmchip_sysfs_match);
+	if (parent) {
+		/* for class_find_device() */
+		put_device(parent);
+		device_unregister(parent);
+	}
+}
+
+static int __init pwm_sysfs_init(void)
+{
+	return class_register(&pwm_class);
+}
+subsys_initcall(pwm_sysfs_init);