Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

1 files changed, 1335 insertions, 0 deletions

diff --git a/kernel/drivers/power/smb347-charger.c b/kernel/drivers/power/smb347-charger.c
new file mode 100644
index 000000000..0b60a0b58
--- /dev/null
+++ b/kernel/drivers/power/smb347-charger.c
@@ -0,0 +1,1335 @@
+/*
+ * Summit Microelectronics SMB347 Battery Charger Driver
+ *
+ * Copyright (C) 2011, Intel Corporation
+ *
+ * Authors: Bruce E. Robertson <bruce.e.robertson@intel.com>
+ *          Mika Westerberg <mika.westerberg@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <linux/power_supply.h>
+#include <linux/power/smb347-charger.h>
+#include <linux/regmap.h>
+
+/*
+ * Configuration registers. These are mirrored to volatile RAM and can be
+ * written once %CMD_A_ALLOW_WRITE is set in %CMD_A register. They will be
+ * reloaded from non-volatile registers after POR.
+ */
+#define CFG_CHARGE_CURRENT			0x00
+#define CFG_CHARGE_CURRENT_FCC_MASK		0xe0
+#define CFG_CHARGE_CURRENT_FCC_SHIFT		5
+#define CFG_CHARGE_CURRENT_PCC_MASK		0x18
+#define CFG_CHARGE_CURRENT_PCC_SHIFT		3
+#define CFG_CHARGE_CURRENT_TC_MASK		0x07
+#define CFG_CURRENT_LIMIT			0x01
+#define CFG_CURRENT_LIMIT_DC_MASK		0xf0
+#define CFG_CURRENT_LIMIT_DC_SHIFT		4
+#define CFG_CURRENT_LIMIT_USB_MASK		0x0f
+#define CFG_FLOAT_VOLTAGE			0x03
+#define CFG_FLOAT_VOLTAGE_FLOAT_MASK		0x3f
+#define CFG_FLOAT_VOLTAGE_THRESHOLD_MASK	0xc0
+#define CFG_FLOAT_VOLTAGE_THRESHOLD_SHIFT	6
+#define CFG_STAT				0x05
+#define CFG_STAT_DISABLED			BIT(5)
+#define CFG_STAT_ACTIVE_HIGH			BIT(7)
+#define CFG_PIN					0x06
+#define CFG_PIN_EN_CTRL_MASK			0x60
+#define CFG_PIN_EN_CTRL_ACTIVE_HIGH		0x40
+#define CFG_PIN_EN_CTRL_ACTIVE_LOW		0x60
+#define CFG_PIN_EN_APSD_IRQ			BIT(1)
+#define CFG_PIN_EN_CHARGER_ERROR		BIT(2)
+#define CFG_THERM				0x07
+#define CFG_THERM_SOFT_HOT_COMPENSATION_MASK	0x03
+#define CFG_THERM_SOFT_HOT_COMPENSATION_SHIFT	0
+#define CFG_THERM_SOFT_COLD_COMPENSATION_MASK	0x0c
+#define CFG_THERM_SOFT_COLD_COMPENSATION_SHIFT	2
+#define CFG_THERM_MONITOR_DISABLED		BIT(4)
+#define CFG_SYSOK				0x08
+#define CFG_SYSOK_SUSPEND_HARD_LIMIT_DISABLED	BIT(2)
+#define CFG_OTHER				0x09
+#define CFG_OTHER_RID_MASK			0xc0
+#define CFG_OTHER_RID_ENABLED_AUTO_OTG		0xc0
+#define CFG_OTG					0x0a
+#define CFG_OTG_TEMP_THRESHOLD_MASK		0x30
+#define CFG_OTG_TEMP_THRESHOLD_SHIFT		4
+#define CFG_OTG_CC_COMPENSATION_MASK		0xc0
+#define CFG_OTG_CC_COMPENSATION_SHIFT		6
+#define CFG_TEMP_LIMIT				0x0b
+#define CFG_TEMP_LIMIT_SOFT_HOT_MASK		0x03
+#define CFG_TEMP_LIMIT_SOFT_HOT_SHIFT		0
+#define CFG_TEMP_LIMIT_SOFT_COLD_MASK		0x0c
+#define CFG_TEMP_LIMIT_SOFT_COLD_SHIFT		2
+#define CFG_TEMP_LIMIT_HARD_HOT_MASK		0x30
+#define CFG_TEMP_LIMIT_HARD_HOT_SHIFT		4
+#define CFG_TEMP_LIMIT_HARD_COLD_MASK		0xc0
+#define CFG_TEMP_LIMIT_HARD_COLD_SHIFT		6
+#define CFG_FAULT_IRQ				0x0c
+#define CFG_FAULT_IRQ_DCIN_UV			BIT(2)
+#define CFG_STATUS_IRQ				0x0d
+#define CFG_STATUS_IRQ_TERMINATION_OR_TAPER	BIT(4)
+#define CFG_STATUS_IRQ_CHARGE_TIMEOUT		BIT(7)
+#define CFG_ADDRESS				0x0e
+
+/* Command registers */
+#define CMD_A					0x30
+#define CMD_A_CHG_ENABLED			BIT(1)
+#define CMD_A_SUSPEND_ENABLED			BIT(2)
+#define CMD_A_ALLOW_WRITE			BIT(7)
+#define CMD_B					0x31
+#define CMD_C					0x33
+
+/* Interrupt Status registers */
+#define IRQSTAT_A				0x35
+#define IRQSTAT_C				0x37
+#define IRQSTAT_C_TERMINATION_STAT		BIT(0)
+#define IRQSTAT_C_TERMINATION_IRQ		BIT(1)
+#define IRQSTAT_C_TAPER_IRQ			BIT(3)
+#define IRQSTAT_D				0x38
+#define IRQSTAT_D_CHARGE_TIMEOUT_STAT		BIT(2)
+#define IRQSTAT_D_CHARGE_TIMEOUT_IRQ		BIT(3)
+#define IRQSTAT_E				0x39
+#define IRQSTAT_E_USBIN_UV_STAT			BIT(0)
+#define IRQSTAT_E_USBIN_UV_IRQ			BIT(1)
+#define IRQSTAT_E_DCIN_UV_STAT			BIT(4)
+#define IRQSTAT_E_DCIN_UV_IRQ			BIT(5)
+#define IRQSTAT_F				0x3a
+
+/* Status registers */
+#define STAT_A					0x3b
+#define STAT_A_FLOAT_VOLTAGE_MASK		0x3f
+#define STAT_B					0x3c
+#define STAT_C					0x3d
+#define STAT_C_CHG_ENABLED			BIT(0)
+#define STAT_C_HOLDOFF_STAT			BIT(3)
+#define STAT_C_CHG_MASK				0x06
+#define STAT_C_CHG_SHIFT			1
+#define STAT_C_CHG_TERM				BIT(5)
+#define STAT_C_CHARGER_ERROR			BIT(6)
+#define STAT_E					0x3f
+
+#define SMB347_MAX_REGISTER			0x3f
+
+/**
+ * struct smb347_charger - smb347 charger instance
+ * @lock: protects concurrent access to online variables
+ * @dev: pointer to device
+ * @regmap: pointer to driver regmap
+ * @mains: power_supply instance for AC/DC power
+ * @usb: power_supply instance for USB power
+ * @battery: power_supply instance for battery
+ * @mains_online: is AC/DC input connected
+ * @usb_online: is USB input connected
+ * @charging_enabled: is charging enabled
+ * @pdata: pointer to platform data
+ */
+struct smb347_charger {
+	struct mutex		lock;
+	struct device		*dev;
+	struct regmap		*regmap;
+	struct power_supply	*mains;
+	struct power_supply	*usb;
+	struct power_supply	*battery;
+	bool			mains_online;
+	bool			usb_online;
+	bool			charging_enabled;
+	const struct smb347_charger_platform_data *pdata;
+};
+
+/* Fast charge current in uA */
+static const unsigned int fcc_tbl[] = {
+	700000,
+	900000,
+	1200000,
+	1500000,
+	1800000,
+	2000000,
+	2200000,
+	2500000,
+};
+
+/* Pre-charge current in uA */
+static const unsigned int pcc_tbl[] = {
+	100000,
+	150000,
+	200000,
+	250000,
+};
+
+/* Termination current in uA */
+static const unsigned int tc_tbl[] = {
+	37500,
+	50000,
+	100000,
+	150000,
+	200000,
+	250000,
+	500000,
+	600000,
+};
+
+/* Input current limit in uA */
+static const unsigned int icl_tbl[] = {
+	300000,
+	500000,
+	700000,
+	900000,
+	1200000,
+	1500000,
+	1800000,
+	2000000,
+	2200000,
+	2500000,
+};
+
+/* Charge current compensation in uA */
+static const unsigned int ccc_tbl[] = {
+	250000,
+	700000,
+	900000,
+	1200000,
+};
+
+/* Convert register value to current using lookup table */
+static int hw_to_current(const unsigned int *tbl, size_t size, unsigned int val)
+{
+	if (val >= size)
+		return -EINVAL;
+	return tbl[val];
+}
+
+/* Convert current to register value using lookup table */
+static int current_to_hw(const unsigned int *tbl, size_t size, unsigned int val)
+{
+	size_t i;
+
+	for (i = 0; i < size; i++)
+		if (val < tbl[i])
+			break;
+	return i > 0 ? i - 1 : -EINVAL;
+}
+
+/**
+ * smb347_update_ps_status - refreshes the power source status
+ * @smb: pointer to smb347 charger instance
+ *
+ * Function checks whether any power source is connected to the charger and
+ * updates internal state accordingly. If there is a change to previous state
+ * function returns %1, otherwise %0 and negative errno in case of errror.
+ */
+static int smb347_update_ps_status(struct smb347_charger *smb)
+{
+	bool usb = false;
+	bool dc = false;
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(smb->regmap, IRQSTAT_E, &val);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * Dc and usb are set depending on whether they are enabled in
+	 * platform data _and_ whether corresponding undervoltage is set.
+	 */
+	if (smb->pdata->use_mains)
+		dc = !(val & IRQSTAT_E_DCIN_UV_STAT);
+	if (smb->pdata->use_usb)
+		usb = !(val & IRQSTAT_E_USBIN_UV_STAT);
+
+	mutex_lock(&smb->lock);
+	ret = smb->mains_online != dc || smb->usb_online != usb;
+	smb->mains_online = dc;
+	smb->usb_online = usb;
+	mutex_unlock(&smb->lock);
+
+	return ret;
+}
+
+/*
+ * smb347_is_ps_online - returns whether input power source is connected
+ * @smb: pointer to smb347 charger instance
+ *
+ * Returns %true if input power source is connected. Note that this is
+ * dependent on what platform has configured for usable power sources. For
+ * example if USB is disabled, this will return %false even if the USB cable
+ * is connected.
+ */
+static bool smb347_is_ps_online(struct smb347_charger *smb)
+{
+	bool ret;
+
+	mutex_lock(&smb->lock);
+	ret = smb->usb_online || smb->mains_online;
+	mutex_unlock(&smb->lock);
+
+	return ret;
+}
+
+/**
+ * smb347_charging_status - returns status of charging
+ * @smb: pointer to smb347 charger instance
+ *
+ * Function returns charging status. %0 means no charging is in progress,
+ * %1 means pre-charging, %2 fast-charging and %3 taper-charging.
+ */
+static int smb347_charging_status(struct smb347_charger *smb)
+{
+	unsigned int val;
+	int ret;
+
+	if (!smb347_is_ps_online(smb))
+		return 0;
+
+	ret = regmap_read(smb->regmap, STAT_C, &val);
+	if (ret < 0)
+		return 0;
+
+	return (val & STAT_C_CHG_MASK) >> STAT_C_CHG_SHIFT;
+}
+
+static int smb347_charging_set(struct smb347_charger *smb, bool enable)
+{
+	int ret = 0;
+
+	if (smb->pdata->enable_control != SMB347_CHG_ENABLE_SW) {
+		dev_dbg(smb->dev, "charging enable/disable in SW disabled\n");
+		return 0;
+	}
+
+	mutex_lock(&smb->lock);
+	if (smb->charging_enabled != enable) {
+		ret = regmap_update_bits(smb->regmap, CMD_A, CMD_A_CHG_ENABLED,
+					 enable ? CMD_A_CHG_ENABLED : 0);
+		if (!ret)
+			smb->charging_enabled = enable;
+	}
+	mutex_unlock(&smb->lock);
+	return ret;
+}
+
+static inline int smb347_charging_enable(struct smb347_charger *smb)
+{
+	return smb347_charging_set(smb, true);
+}
+
+static inline int smb347_charging_disable(struct smb347_charger *smb)
+{
+	return smb347_charging_set(smb, false);
+}
+
+static int smb347_start_stop_charging(struct smb347_charger *smb)
+{
+	int ret;
+
+	/*
+	 * Depending on whether valid power source is connected or not, we
+	 * disable or enable the charging. We do it manually because it
+	 * depends on how the platform has configured the valid inputs.
+	 */
+	if (smb347_is_ps_online(smb)) {
+		ret = smb347_charging_enable(smb);
+		if (ret < 0)
+			dev_err(smb->dev, "failed to enable charging\n");
+	} else {
+		ret = smb347_charging_disable(smb);
+		if (ret < 0)
+			dev_err(smb->dev, "failed to disable charging\n");
+	}
+
+	return ret;
+}
+
+static int smb347_set_charge_current(struct smb347_charger *smb)
+{
+	int ret;
+
+	if (smb->pdata->max_charge_current) {
+		ret = current_to_hw(fcc_tbl, ARRAY_SIZE(fcc_tbl),
+				    smb->pdata->max_charge_current);
+		if (ret < 0)
+			return ret;
+
+		ret = regmap_update_bits(smb->regmap, CFG_CHARGE_CURRENT,
+					 CFG_CHARGE_CURRENT_FCC_MASK,
+					 ret << CFG_CHARGE_CURRENT_FCC_SHIFT);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (smb->pdata->pre_charge_current) {
+		ret = current_to_hw(pcc_tbl, ARRAY_SIZE(pcc_tbl),
+				    smb->pdata->pre_charge_current);
+		if (ret < 0)
+			return ret;
+
+		ret = regmap_update_bits(smb->regmap, CFG_CHARGE_CURRENT,
+					 CFG_CHARGE_CURRENT_PCC_MASK,
+					 ret << CFG_CHARGE_CURRENT_PCC_SHIFT);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (smb->pdata->termination_current) {
+		ret = current_to_hw(tc_tbl, ARRAY_SIZE(tc_tbl),
+				    smb->pdata->termination_current);
+		if (ret < 0)
+			return ret;
+
+		ret = regmap_update_bits(smb->regmap, CFG_CHARGE_CURRENT,
+					 CFG_CHARGE_CURRENT_TC_MASK, ret);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int smb347_set_current_limits(struct smb347_charger *smb)
+{
+	int ret;
+
+	if (smb->pdata->mains_current_limit) {
+		ret = current_to_hw(icl_tbl, ARRAY_SIZE(icl_tbl),
+				    smb->pdata->mains_current_limit);
+		if (ret < 0)
+			return ret;
+
+		ret = regmap_update_bits(smb->regmap, CFG_CURRENT_LIMIT,
+					 CFG_CURRENT_LIMIT_DC_MASK,
+					 ret << CFG_CURRENT_LIMIT_DC_SHIFT);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (smb->pdata->usb_hc_current_limit) {
+		ret = current_to_hw(icl_tbl, ARRAY_SIZE(icl_tbl),
+				    smb->pdata->usb_hc_current_limit);
+		if (ret < 0)
+			return ret;
+
+		ret = regmap_update_bits(smb->regmap, CFG_CURRENT_LIMIT,
+					 CFG_CURRENT_LIMIT_USB_MASK, ret);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int smb347_set_voltage_limits(struct smb347_charger *smb)
+{
+	int ret;
+
+	if (smb->pdata->pre_to_fast_voltage) {
+		ret = smb->pdata->pre_to_fast_voltage;
+
+		/* uV */
+		ret = clamp_val(ret, 2400000, 3000000) - 2400000;
+		ret /= 200000;
+
+		ret = regmap_update_bits(smb->regmap, CFG_FLOAT_VOLTAGE,
+				CFG_FLOAT_VOLTAGE_THRESHOLD_MASK,
+				ret << CFG_FLOAT_VOLTAGE_THRESHOLD_SHIFT);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (smb->pdata->max_charge_voltage) {
+		ret = smb->pdata->max_charge_voltage;
+
+		/* uV */
+		ret = clamp_val(ret, 3500000, 4500000) - 3500000;
+		ret /= 20000;
+
+		ret = regmap_update_bits(smb->regmap, CFG_FLOAT_VOLTAGE,
+					 CFG_FLOAT_VOLTAGE_FLOAT_MASK, ret);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int smb347_set_temp_limits(struct smb347_charger *smb)
+{
+	bool enable_therm_monitor = false;
+	int ret = 0;
+	int val;
+
+	if (smb->pdata->chip_temp_threshold) {
+		val = smb->pdata->chip_temp_threshold;
+
+		/* degree C */
+		val = clamp_val(val, 100, 130) - 100;
+		val /= 10;
+
+		ret = regmap_update_bits(smb->regmap, CFG_OTG,
+					 CFG_OTG_TEMP_THRESHOLD_MASK,
+					 val << CFG_OTG_TEMP_THRESHOLD_SHIFT);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (smb->pdata->soft_cold_temp_limit != SMB347_TEMP_USE_DEFAULT) {
+		val = smb->pdata->soft_cold_temp_limit;
+
+		val = clamp_val(val, 0, 15);
+		val /= 5;
+		/* this goes from higher to lower so invert the value */
+		val = ~val & 0x3;
+
+		ret = regmap_update_bits(smb->regmap, CFG_TEMP_LIMIT,
+					 CFG_TEMP_LIMIT_SOFT_COLD_MASK,
+					 val << CFG_TEMP_LIMIT_SOFT_COLD_SHIFT);
+		if (ret < 0)
+			return ret;
+
+		enable_therm_monitor = true;
+	}
+
+	if (smb->pdata->soft_hot_temp_limit != SMB347_TEMP_USE_DEFAULT) {
+		val = smb->pdata->soft_hot_temp_limit;
+
+		val = clamp_val(val, 40, 55) - 40;
+		val /= 5;
+
+		ret = regmap_update_bits(smb->regmap, CFG_TEMP_LIMIT,
+					 CFG_TEMP_LIMIT_SOFT_HOT_MASK,
+					 val << CFG_TEMP_LIMIT_SOFT_HOT_SHIFT);
+		if (ret < 0)
+			return ret;
+
+		enable_therm_monitor = true;
+	}
+
+	if (smb->pdata->hard_cold_temp_limit != SMB347_TEMP_USE_DEFAULT) {
+		val = smb->pdata->hard_cold_temp_limit;
+
+		val = clamp_val(val, -5, 10) + 5;
+		val /= 5;
+		/* this goes from higher to lower so invert the value */
+		val = ~val & 0x3;
+
+		ret = regmap_update_bits(smb->regmap, CFG_TEMP_LIMIT,
+					 CFG_TEMP_LIMIT_HARD_COLD_MASK,
+					 val << CFG_TEMP_LIMIT_HARD_COLD_SHIFT);
+		if (ret < 0)
+			return ret;
+
+		enable_therm_monitor = true;
+	}
+
+	if (smb->pdata->hard_hot_temp_limit != SMB347_TEMP_USE_DEFAULT) {
+		val = smb->pdata->hard_hot_temp_limit;
+
+		val = clamp_val(val, 50, 65) - 50;
+		val /= 5;
+
+		ret = regmap_update_bits(smb->regmap, CFG_TEMP_LIMIT,
+					 CFG_TEMP_LIMIT_HARD_HOT_MASK,
+					 val << CFG_TEMP_LIMIT_HARD_HOT_SHIFT);
+		if (ret < 0)
+			return ret;
+
+		enable_therm_monitor = true;
+	}
+
+	/*
+	 * If any of the temperature limits are set, we also enable the
+	 * thermistor monitoring.
+	 *
+	 * When soft limits are hit, the device will start to compensate
+	 * current and/or voltage depending on the configuration.
+	 *
+	 * When hard limit is hit, the device will suspend charging
+	 * depending on the configuration.
+	 */
+	if (enable_therm_monitor) {
+		ret = regmap_update_bits(smb->regmap, CFG_THERM,
+					 CFG_THERM_MONITOR_DISABLED, 0);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (smb->pdata->suspend_on_hard_temp_limit) {
+		ret = regmap_update_bits(smb->regmap, CFG_SYSOK,
+				 CFG_SYSOK_SUSPEND_HARD_LIMIT_DISABLED, 0);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (smb->pdata->soft_temp_limit_compensation !=
+	    SMB347_SOFT_TEMP_COMPENSATE_DEFAULT) {
+		val = smb->pdata->soft_temp_limit_compensation & 0x3;
+
+		ret = regmap_update_bits(smb->regmap, CFG_THERM,
+				 CFG_THERM_SOFT_HOT_COMPENSATION_MASK,
+				 val << CFG_THERM_SOFT_HOT_COMPENSATION_SHIFT);
+		if (ret < 0)
+			return ret;
+
+		ret = regmap_update_bits(smb->regmap, CFG_THERM,
+				 CFG_THERM_SOFT_COLD_COMPENSATION_MASK,
+				 val << CFG_THERM_SOFT_COLD_COMPENSATION_SHIFT);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (smb->pdata->charge_current_compensation) {
+		val = current_to_hw(ccc_tbl, ARRAY_SIZE(ccc_tbl),
+				    smb->pdata->charge_current_compensation);
+		if (val < 0)
+			return val;
+
+		ret = regmap_update_bits(smb->regmap, CFG_OTG,
+				CFG_OTG_CC_COMPENSATION_MASK,
+				(val & 0x3) << CFG_OTG_CC_COMPENSATION_SHIFT);
+		if (ret < 0)
+			return ret;
+	}
+
+	return ret;
+}
+
+/*
+ * smb347_set_writable - enables/disables writing to non-volatile registers
+ * @smb: pointer to smb347 charger instance
+ *
+ * You can enable/disable writing to the non-volatile configuration
+ * registers by calling this function.
+ *
+ * Returns %0 on success and negative errno in case of failure.
+ */
+static int smb347_set_writable(struct smb347_charger *smb, bool writable)
+{
+	return regmap_update_bits(smb->regmap, CMD_A, CMD_A_ALLOW_WRITE,
+				  writable ? CMD_A_ALLOW_WRITE : 0);
+}
+
+static int smb347_hw_init(struct smb347_charger *smb)
+{
+	unsigned int val;
+	int ret;
+
+	ret = smb347_set_writable(smb, true);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * Program the platform specific configuration values to the device
+	 * first.
+	 */
+	ret = smb347_set_charge_current(smb);
+	if (ret < 0)
+		goto fail;
+
+	ret = smb347_set_current_limits(smb);
+	if (ret < 0)
+		goto fail;
+
+	ret = smb347_set_voltage_limits(smb);
+	if (ret < 0)
+		goto fail;
+
+	ret = smb347_set_temp_limits(smb);
+	if (ret < 0)
+		goto fail;
+
+	/* If USB charging is disabled we put the USB in suspend mode */
+	if (!smb->pdata->use_usb) {
+		ret = regmap_update_bits(smb->regmap, CMD_A,
+					 CMD_A_SUSPEND_ENABLED,
+					 CMD_A_SUSPEND_ENABLED);
+		if (ret < 0)
+			goto fail;
+	}
+
+	/*
+	 * If configured by platform data, we enable hardware Auto-OTG
+	 * support for driving VBUS. Otherwise we disable it.
+	 */
+	ret = regmap_update_bits(smb->regmap, CFG_OTHER, CFG_OTHER_RID_MASK,
+		smb->pdata->use_usb_otg ? CFG_OTHER_RID_ENABLED_AUTO_OTG : 0);
+	if (ret < 0)
+		goto fail;
+
+	/*
+	 * Make the charging functionality controllable by a write to the
+	 * command register unless pin control is specified in the platform
+	 * data.
+	 */
+	switch (smb->pdata->enable_control) {
+	case SMB347_CHG_ENABLE_PIN_ACTIVE_LOW:
+		val = CFG_PIN_EN_CTRL_ACTIVE_LOW;
+		break;
+	case SMB347_CHG_ENABLE_PIN_ACTIVE_HIGH:
+		val = CFG_PIN_EN_CTRL_ACTIVE_HIGH;
+		break;
+	default:
+		val = 0;
+		break;
+	}
+
+	ret = regmap_update_bits(smb->regmap, CFG_PIN, CFG_PIN_EN_CTRL_MASK,
+				 val);
+	if (ret < 0)
+		goto fail;
+
+	/* Disable Automatic Power Source Detection (APSD) interrupt. */
+	ret = regmap_update_bits(smb->regmap, CFG_PIN, CFG_PIN_EN_APSD_IRQ, 0);
+	if (ret < 0)
+		goto fail;
+
+	ret = smb347_update_ps_status(smb);
+	if (ret < 0)
+		goto fail;
+
+	ret = smb347_start_stop_charging(smb);
+
+fail:
+	smb347_set_writable(smb, false);
+	return ret;
+}
+
+static irqreturn_t smb347_interrupt(int irq, void *data)
+{
+	struct smb347_charger *smb = data;
+	unsigned int stat_c, irqstat_c, irqstat_d, irqstat_e;
+	bool handled = false;
+	int ret;
+
+	ret = regmap_read(smb->regmap, STAT_C, &stat_c);
+	if (ret < 0) {
+		dev_warn(smb->dev, "reading STAT_C failed\n");
+		return IRQ_NONE;
+	}
+
+	ret = regmap_read(smb->regmap, IRQSTAT_C, &irqstat_c);
+	if (ret < 0) {
+		dev_warn(smb->dev, "reading IRQSTAT_C failed\n");
+		return IRQ_NONE;
+	}
+
+	ret = regmap_read(smb->regmap, IRQSTAT_D, &irqstat_d);
+	if (ret < 0) {
+		dev_warn(smb->dev, "reading IRQSTAT_D failed\n");
+		return IRQ_NONE;
+	}
+
+	ret = regmap_read(smb->regmap, IRQSTAT_E, &irqstat_e);
+	if (ret < 0) {
+		dev_warn(smb->dev, "reading IRQSTAT_E failed\n");
+		return IRQ_NONE;
+	}
+
+	/*
+	 * If we get charger error we report the error back to user.
+	 * If the error is recovered charging will resume again.
+	 */
+	if (stat_c & STAT_C_CHARGER_ERROR) {
+		dev_err(smb->dev, "charging stopped due to charger error\n");
+		power_supply_changed(smb->battery);
+		handled = true;
+	}
+
+	/*
+	 * If we reached the termination current the battery is charged and
+	 * we can update the status now. Charging is automatically
+	 * disabled by the hardware.
+	 */
+	if (irqstat_c & (IRQSTAT_C_TERMINATION_IRQ | IRQSTAT_C_TAPER_IRQ)) {
+		if (irqstat_c & IRQSTAT_C_TERMINATION_STAT)
+			power_supply_changed(smb->battery);
+		dev_dbg(smb->dev, "going to HW maintenance mode\n");
+		handled = true;
+	}
+
+	/*
+	 * If we got a charger timeout INT that means the charge
+	 * full is not detected with in charge timeout value.
+	 */
+	if (irqstat_d & IRQSTAT_D_CHARGE_TIMEOUT_IRQ) {
+		dev_dbg(smb->dev, "total Charge Timeout INT received\n");
+
+		if (irqstat_d & IRQSTAT_D_CHARGE_TIMEOUT_STAT)
+			dev_warn(smb->dev, "charging stopped due to timeout\n");
+		power_supply_changed(smb->battery);
+		handled = true;
+	}
+
+	/*
+	 * If we got an under voltage interrupt it means that AC/USB input
+	 * was connected or disconnected.
+	 */
+	if (irqstat_e & (IRQSTAT_E_USBIN_UV_IRQ | IRQSTAT_E_DCIN_UV_IRQ)) {
+		if (smb347_update_ps_status(smb) > 0) {
+			smb347_start_stop_charging(smb);
+			if (smb->pdata->use_mains)
+				power_supply_changed(smb->mains);
+			if (smb->pdata->use_usb)
+				power_supply_changed(smb->usb);
+		}
+		handled = true;
+	}
+
+	return handled ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static int smb347_irq_set(struct smb347_charger *smb, bool enable)
+{
+	int ret;
+
+	ret = smb347_set_writable(smb, true);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * Enable/disable interrupts for:
+	 *	- under voltage
+	 *	- termination current reached
+	 *	- charger timeout
+	 *	- charger error
+	 */
+	ret = regmap_update_bits(smb->regmap, CFG_FAULT_IRQ, 0xff,
+				 enable ? CFG_FAULT_IRQ_DCIN_UV : 0);
+	if (ret < 0)
+		goto fail;
+
+	ret = regmap_update_bits(smb->regmap, CFG_STATUS_IRQ, 0xff,
+			enable ? (CFG_STATUS_IRQ_TERMINATION_OR_TAPER |
+					CFG_STATUS_IRQ_CHARGE_TIMEOUT) : 0);
+	if (ret < 0)
+		goto fail;
+
+	ret = regmap_update_bits(smb->regmap, CFG_PIN, CFG_PIN_EN_CHARGER_ERROR,
+				 enable ? CFG_PIN_EN_CHARGER_ERROR : 0);
+fail:
+	smb347_set_writable(smb, false);
+	return ret;
+}
+
+static inline int smb347_irq_enable(struct smb347_charger *smb)
+{
+	return smb347_irq_set(smb, true);
+}
+
+static inline int smb347_irq_disable(struct smb347_charger *smb)
+{
+	return smb347_irq_set(smb, false);
+}
+
+static int smb347_irq_init(struct smb347_charger *smb,
+			   struct i2c_client *client)
+{
+	const struct smb347_charger_platform_data *pdata = smb->pdata;
+	int ret, irq = gpio_to_irq(pdata->irq_gpio);
+
+	ret = gpio_request_one(pdata->irq_gpio, GPIOF_IN, client->name);
+	if (ret < 0)
+		goto fail;
+
+	ret = request_threaded_irq(irq, NULL, smb347_interrupt,
+				   IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+				   client->name, smb);
+	if (ret < 0)
+		goto fail_gpio;
+
+	ret = smb347_set_writable(smb, true);
+	if (ret < 0)
+		goto fail_irq;
+
+	/*
+	 * Configure the STAT output to be suitable for interrupts: disable
+	 * all other output (except interrupts) and make it active low.
+	 */
+	ret = regmap_update_bits(smb->regmap, CFG_STAT,
+				 CFG_STAT_ACTIVE_HIGH | CFG_STAT_DISABLED,
+				 CFG_STAT_DISABLED);
+	if (ret < 0)
+		goto fail_readonly;
+
+	smb347_set_writable(smb, false);
+	client->irq = irq;
+	return 0;
+
+fail_readonly:
+	smb347_set_writable(smb, false);
+fail_irq:
+	free_irq(irq, smb);
+fail_gpio:
+	gpio_free(pdata->irq_gpio);
+fail:
+	client->irq = 0;
+	return ret;
+}
+
+/*
+ * Returns the constant charge current programmed
+ * into the charger in uA.
+ */
+static int get_const_charge_current(struct smb347_charger *smb)
+{
+	int ret, intval;
+	unsigned int v;
+
+	if (!smb347_is_ps_online(smb))
+		return -ENODATA;
+
+	ret = regmap_read(smb->regmap, STAT_B, &v);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * The current value is composition of FCC and PCC values
+	 * and we can detect which table to use from bit 5.
+	 */
+	if (v & 0x20) {
+		intval = hw_to_current(fcc_tbl, ARRAY_SIZE(fcc_tbl), v & 7);
+	} else {
+		v >>= 3;
+		intval = hw_to_current(pcc_tbl, ARRAY_SIZE(pcc_tbl), v & 7);
+	}
+
+	return intval;
+}
+
+/*
+ * Returns the constant charge voltage programmed
+ * into the charger in uV.
+ */
+static int get_const_charge_voltage(struct smb347_charger *smb)
+{
+	int ret, intval;
+	unsigned int v;
+
+	if (!smb347_is_ps_online(smb))
+		return -ENODATA;
+
+	ret = regmap_read(smb->regmap, STAT_A, &v);
+	if (ret < 0)
+		return ret;
+
+	v &= STAT_A_FLOAT_VOLTAGE_MASK;
+	if (v > 0x3d)
+		v = 0x3d;
+
+	intval = 3500000 + v * 20000;
+
+	return intval;
+}
+
+static int smb347_mains_get_property(struct power_supply *psy,
+				     enum power_supply_property prop,
+				     union power_supply_propval *val)
+{
+	struct smb347_charger *smb = power_supply_get_drvdata(psy);
+	int ret;
+
+	switch (prop) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = smb->mains_online;
+		break;
+
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+		ret = get_const_charge_voltage(smb);
+		if (ret < 0)
+			return ret;
+		else
+			val->intval = ret;
+		break;
+
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+		ret = get_const_charge_current(smb);
+		if (ret < 0)
+			return ret;
+		else
+			val->intval = ret;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static enum power_supply_property smb347_mains_properties[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
+};
+
+static int smb347_usb_get_property(struct power_supply *psy,
+				   enum power_supply_property prop,
+				   union power_supply_propval *val)
+{
+	struct smb347_charger *smb = power_supply_get_drvdata(psy);
+	int ret;
+
+	switch (prop) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = smb->usb_online;
+		break;
+
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+		ret = get_const_charge_voltage(smb);
+		if (ret < 0)
+			return ret;
+		else
+			val->intval = ret;
+		break;
+
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+		ret = get_const_charge_current(smb);
+		if (ret < 0)
+			return ret;
+		else
+			val->intval = ret;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static enum power_supply_property smb347_usb_properties[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
+};
+
+static int smb347_get_charging_status(struct smb347_charger *smb)
+{
+	int ret, status;
+	unsigned int val;
+
+	if (!smb347_is_ps_online(smb))
+		return POWER_SUPPLY_STATUS_DISCHARGING;
+
+	ret = regmap_read(smb->regmap, STAT_C, &val);
+	if (ret < 0)
+		return ret;
+
+	if ((val & STAT_C_CHARGER_ERROR) ||
+			(val & STAT_C_HOLDOFF_STAT)) {
+		/*
+		 * set to NOT CHARGING upon charger error
+		 * or charging has stopped.
+		 */
+		status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+	} else {
+		if ((val & STAT_C_CHG_MASK) >> STAT_C_CHG_SHIFT) {
+			/*
+			 * set to charging if battery is in pre-charge,
+			 * fast charge or taper charging mode.
+			 */
+			status = POWER_SUPPLY_STATUS_CHARGING;
+		} else if (val & STAT_C_CHG_TERM) {
+			/*
+			 * set the status to FULL if battery is not in pre
+			 * charge, fast charge or taper charging mode AND
+			 * charging is terminated at least once.
+			 */
+			status = POWER_SUPPLY_STATUS_FULL;
+		} else {
+			/*
+			 * in this case no charger error or termination
+			 * occured but charging is not in progress!!!
+			 */
+			status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+		}
+	}
+
+	return status;
+}
+
+static int smb347_battery_get_property(struct power_supply *psy,
+				       enum power_supply_property prop,
+				       union power_supply_propval *val)
+{
+	struct smb347_charger *smb = power_supply_get_drvdata(psy);
+	const struct smb347_charger_platform_data *pdata = smb->pdata;
+	int ret;
+
+	ret = smb347_update_ps_status(smb);
+	if (ret < 0)
+		return ret;
+
+	switch (prop) {
+	case POWER_SUPPLY_PROP_STATUS:
+		ret = smb347_get_charging_status(smb);
+		if (ret < 0)
+			return ret;
+		val->intval = ret;
+		break;
+
+	case POWER_SUPPLY_PROP_CHARGE_TYPE:
+		if (!smb347_is_ps_online(smb))
+			return -ENODATA;
+
+		/*
+		 * We handle trickle and pre-charging the same, and taper
+		 * and none the same.
+		 */
+		switch (smb347_charging_status(smb)) {
+		case 1:
+			val->intval = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+			break;
+		case 2:
+			val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST;
+			break;
+		default:
+			val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE;
+			break;
+		}
+		break;
+
+	case POWER_SUPPLY_PROP_TECHNOLOGY:
+		val->intval = pdata->battery_info.technology;
+		break;
+
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+		val->intval = pdata->battery_info.voltage_min_design;
+		break;
+
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+		val->intval = pdata->battery_info.voltage_max_design;
+		break;
+
+	case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+		val->intval = pdata->battery_info.charge_full_design;
+		break;
+
+	case POWER_SUPPLY_PROP_MODEL_NAME:
+		val->strval = pdata->battery_info.name;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static enum power_supply_property smb347_battery_properties[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_CHARGE_TYPE,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+	POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+	POWER_SUPPLY_PROP_MODEL_NAME,
+};
+
+static bool smb347_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case IRQSTAT_A:
+	case IRQSTAT_C:
+	case IRQSTAT_E:
+	case IRQSTAT_F:
+	case STAT_A:
+	case STAT_B:
+	case STAT_C:
+	case STAT_E:
+		return true;
+	}
+
+	return false;
+}
+
+static bool smb347_readable_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case CFG_CHARGE_CURRENT:
+	case CFG_CURRENT_LIMIT:
+	case CFG_FLOAT_VOLTAGE:
+	case CFG_STAT:
+	case CFG_PIN:
+	case CFG_THERM:
+	case CFG_SYSOK:
+	case CFG_OTHER:
+	case CFG_OTG:
+	case CFG_TEMP_LIMIT:
+	case CFG_FAULT_IRQ:
+	case CFG_STATUS_IRQ:
+	case CFG_ADDRESS:
+	case CMD_A:
+	case CMD_B:
+	case CMD_C:
+		return true;
+	}
+
+	return smb347_volatile_reg(dev, reg);
+}
+
+static const struct regmap_config smb347_regmap = {
+	.reg_bits	= 8,
+	.val_bits	= 8,
+	.max_register	= SMB347_MAX_REGISTER,
+	.volatile_reg	= smb347_volatile_reg,
+	.readable_reg	= smb347_readable_reg,
+};
+
+static const struct power_supply_desc smb347_mains_desc = {
+	.name		= "smb347-mains",
+	.type		= POWER_SUPPLY_TYPE_MAINS,
+	.get_property	= smb347_mains_get_property,
+	.properties	= smb347_mains_properties,
+	.num_properties	= ARRAY_SIZE(smb347_mains_properties),
+};
+
+static const struct power_supply_desc smb347_usb_desc = {
+	.name		= "smb347-usb",
+	.type		= POWER_SUPPLY_TYPE_USB,
+	.get_property	= smb347_usb_get_property,
+	.properties	= smb347_usb_properties,
+	.num_properties	= ARRAY_SIZE(smb347_usb_properties),
+};
+
+static const struct power_supply_desc smb347_battery_desc = {
+	.name		= "smb347-battery",
+	.type		= POWER_SUPPLY_TYPE_BATTERY,
+	.get_property	= smb347_battery_get_property,
+	.properties	= smb347_battery_properties,
+	.num_properties	= ARRAY_SIZE(smb347_battery_properties),
+};
+
+static int smb347_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	static char *battery[] = { "smb347-battery" };
+	const struct smb347_charger_platform_data *pdata;
+	struct power_supply_config mains_usb_cfg = {}, battery_cfg = {};
+	struct device *dev = &client->dev;
+	struct smb347_charger *smb;
+	int ret;
+
+	pdata = dev->platform_data;
+	if (!pdata)
+		return -EINVAL;
+
+	if (!pdata->use_mains && !pdata->use_usb)
+		return -EINVAL;
+
+	smb = devm_kzalloc(dev, sizeof(*smb), GFP_KERNEL);
+	if (!smb)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, smb);
+
+	mutex_init(&smb->lock);
+	smb->dev = &client->dev;
+	smb->pdata = pdata;
+
+	smb->regmap = devm_regmap_init_i2c(client, &smb347_regmap);
+	if (IS_ERR(smb->regmap))
+		return PTR_ERR(smb->regmap);
+
+	ret = smb347_hw_init(smb);
+	if (ret < 0)
+		return ret;
+
+	mains_usb_cfg.supplied_to = battery;
+	mains_usb_cfg.num_supplicants = ARRAY_SIZE(battery);
+	mains_usb_cfg.drv_data = smb;
+	if (smb->pdata->use_mains) {
+		smb->mains = power_supply_register(dev, &smb347_mains_desc,
+						   &mains_usb_cfg);
+		if (IS_ERR(smb->mains))
+			return PTR_ERR(smb->mains);
+	}
+
+	if (smb->pdata->use_usb) {
+		smb->usb = power_supply_register(dev, &smb347_usb_desc,
+						 &mains_usb_cfg);
+		if (IS_ERR(smb->usb)) {
+			if (smb->pdata->use_mains)
+				power_supply_unregister(smb->mains);
+			return PTR_ERR(smb->usb);
+		}
+	}
+
+	battery_cfg.drv_data = smb;
+	smb->battery = power_supply_register(dev, &smb347_battery_desc,
+					     &battery_cfg);
+	if (IS_ERR(smb->battery)) {
+		if (smb->pdata->use_usb)
+			power_supply_unregister(smb->usb);
+		if (smb->pdata->use_mains)
+			power_supply_unregister(smb->mains);
+		return PTR_ERR(smb->battery);
+	}
+
+	/*
+	 * Interrupt pin is optional. If it is connected, we setup the
+	 * interrupt support here.
+	 */
+	if (pdata->irq_gpio >= 0) {
+		ret = smb347_irq_init(smb, client);
+		if (ret < 0) {
+			dev_warn(dev, "failed to initialize IRQ: %d\n", ret);
+			dev_warn(dev, "disabling IRQ support\n");
+		} else {
+			smb347_irq_enable(smb);
+		}
+	}
+
+	return 0;
+}
+
+static int smb347_remove(struct i2c_client *client)
+{
+	struct smb347_charger *smb = i2c_get_clientdata(client);
+
+	if (client->irq) {
+		smb347_irq_disable(smb);
+		free_irq(client->irq, smb);
+		gpio_free(smb->pdata->irq_gpio);
+	}
+
+	power_supply_unregister(smb->battery);
+	if (smb->pdata->use_usb)
+		power_supply_unregister(smb->usb);
+	if (smb->pdata->use_mains)
+		power_supply_unregister(smb->mains);
+	return 0;
+}
+
+static const struct i2c_device_id smb347_id[] = {
+	{ "smb347", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, smb347_id);
+
+static struct i2c_driver smb347_driver = {
+	.driver = {
+		.name = "smb347",
+	},
+	.probe        = smb347_probe,
+	.remove       = smb347_remove,
+	.id_table     = smb347_id,
+};
+
+module_i2c_driver(smb347_driver);
+
+MODULE_AUTHOR("Bruce E. Robertson <bruce.e.robertson@intel.com>");
+MODULE_AUTHOR("Mika Westerberg <mika.westerberg@linux.intel.com>");
+MODULE_DESCRIPTION("SMB347 battery charger driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("i2c:smb347");