diff options
author | 2015-08-04 12:17:53 -0700 | |
---|---|---|
committer | 2015-08-04 15:44:42 -0700 | |
commit | 9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 (patch) | |
tree | 1c9cafbcd35f783a87880a10f85d1a060db1a563 /kernel/drivers/pinctrl/pinctrl-adi2.c | |
parent | 98260f3884f4a202f9ca5eabed40b1354c489b29 (diff) |
Add the rt linux 4.1.3-rt3 as base
Import the rt linux 4.1.3-rt3 as OPNFV kvm base.
It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:
commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Sat Jul 25 12:13:34 2015 +0200
Prepare v4.1.3-rt3
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.
Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>
Diffstat (limited to 'kernel/drivers/pinctrl/pinctrl-adi2.c')
-rw-r--r-- | kernel/drivers/pinctrl/pinctrl-adi2.c | 1146 |
1 files changed, 1146 insertions, 0 deletions
diff --git a/kernel/drivers/pinctrl/pinctrl-adi2.c b/kernel/drivers/pinctrl/pinctrl-adi2.c new file mode 100644 index 000000000..8434439c5 --- /dev/null +++ b/kernel/drivers/pinctrl/pinctrl-adi2.c @@ -0,0 +1,1146 @@ +/* + * Pinctrl Driver for ADI GPIO2 controller + * + * Copyright 2007-2013 Analog Devices Inc. + * + * Licensed under the GPLv2 or later + */ + +#include <linux/bitops.h> +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/err.h> +#include <linux/debugfs.h> +#include <linux/seq_file.h> +#include <linux/irq.h> +#include <linux/platform_data/pinctrl-adi2.h> +#include <linux/irqdomain.h> +#include <linux/irqchip/chained_irq.h> +#include <linux/pinctrl/pinctrl.h> +#include <linux/pinctrl/pinmux.h> +#include <linux/pinctrl/consumer.h> +#include <linux/pinctrl/machine.h> +#include <linux/syscore_ops.h> +#include <linux/gpio.h> +#include <asm/portmux.h> +#include "pinctrl-adi2.h" +#include "core.h" + +/* +According to the BF54x HRM, pint means "pin interrupt". +http://www.analog.com/static/imported-files/processor_manuals/ADSP-BF54x_hwr_rev1.2.pdf + +ADSP-BF54x processor Blackfin processors have four SIC interrupt chan- +nels dedicated to pin interrupt purposes. These channels are managed by +four hardware blocks, called PINT0, PINT1, PINT2, and PINT3. Every PINTx +block can sense to up to 32 pins. While PINT0 and PINT1 can sense the +pins of port A and port B, PINT2 and PINT3 manage all the pins from port +C to port J as shown in Figure 9-2. + +n BF54x HRM: +The ten GPIO ports are subdivided into 8-bit half ports, resulting in lower and +upper half 8-bit units. The PINTx_ASSIGN registers control the 8-bit multi- +plexers shown in Figure 9-3. Lower half units of eight pins can be +forwarded to either byte 0 or byte 2 of either associated PINTx block. +Upper half units can be forwarded to either byte 1 or byte 3 of the pin +interrupt blocks, without further restrictions. + +All MMR registers in the pin interrupt module are 32 bits wide. To simply the +mapping logic, this driver only maps a 16-bit gpio port to the upper or lower +16 bits of a PINTx block. You can find the Figure 9-3 on page 583. + +Each IRQ domain is binding to a GPIO bank device. 2 GPIO bank devices can map +to one PINT device. Two in "struct gpio_pint" are used to ease the PINT +interrupt handler. + +The GPIO bank mapping to the lower 16 bits of the PINT device set its IRQ +domain pointer in domain[0]. The IRQ domain pointer of the other bank is set +to domain[1]. PINT interrupt handler adi_gpio_handle_pint_irq() finds out +the current domain pointer according to whether the interrupt request mask +is in lower 16 bits (domain[0]) or upper 16bits (domain[1]). + +A PINT device is not part of a GPIO port device in Blackfin. Multiple GPIO +port devices can be mapped to the same PINT device. + +*/ + +static LIST_HEAD(adi_pint_list); +static LIST_HEAD(adi_gpio_port_list); + +#define DRIVER_NAME "pinctrl-adi2" + +#define PINT_HI_OFFSET 16 + +/** + * struct gpio_port_saved - GPIO port registers that should be saved between + * power suspend and resume operations. + * + * @fer: PORTx_FER register + * @data: PORTx_DATA register + * @dir: PORTx_DIR register + * @inen: PORTx_INEN register + * @mux: PORTx_MUX register + */ +struct gpio_port_saved { + u16 fer; + u16 data; + u16 dir; + u16 inen; + u32 mux; +}; + +/* + * struct gpio_pint_saved - PINT registers saved in PM operations + * + * @assign: ASSIGN register + * @edge_set: EDGE_SET register + * @invert_set: INVERT_SET register + */ +struct gpio_pint_saved { + u32 assign; + u32 edge_set; + u32 invert_set; +}; + +/** + * struct gpio_pint - Pin interrupt controller device. Multiple ADI GPIO + * banks can be mapped into one Pin interrupt controller. + * + * @node: All gpio_pint instances are added to a global list. + * @base: PINT device register base address + * @irq: IRQ of the PINT device, it is the parent IRQ of all + * GPIO IRQs mapping to this device. + * @domain: [0] irq domain of the gpio port, whose hardware interrupts are + * mapping to the low 16-bit of the pint registers. + * [1] irq domain of the gpio port, whose hardware interrupts are + * mapping to the high 16-bit of the pint registers. + * @regs: address pointer to the PINT device + * @map_count: No more than 2 GPIO banks can be mapped to this PINT device. + * @lock: This lock make sure the irq_chip operations to one PINT device + * for different GPIO interrrupts are atomic. + * @pint_map_port: Set up the mapping between one PINT device and + * multiple GPIO banks. + */ +struct gpio_pint { + struct list_head node; + void __iomem *base; + int irq; + struct irq_domain *domain[2]; + struct gpio_pint_regs *regs; + struct gpio_pint_saved saved_data; + int map_count; + spinlock_t lock; + + int (*pint_map_port)(struct gpio_pint *pint, bool assign, + u8 map, struct irq_domain *domain); +}; + +/** + * ADI pin controller + * + * @dev: a pointer back to containing device + * @pctl: the pinctrl device + * @soc: SoC data for this specific chip + */ +struct adi_pinctrl { + struct device *dev; + struct pinctrl_dev *pctl; + const struct adi_pinctrl_soc_data *soc; +}; + +/** + * struct gpio_port - GPIO bank device. Multiple ADI GPIO banks can be mapped + * into one pin interrupt controller. + * + * @node: All gpio_port instances are added to a list. + * @base: GPIO bank device register base address + * @irq_base: base IRQ of the GPIO bank device + * @width: PIN number of the GPIO bank device + * @regs: address pointer to the GPIO bank device + * @saved_data: registers that should be saved between PM operations. + * @dev: device structure of this GPIO bank + * @pint: GPIO PINT device that this GPIO bank mapped to + * @pint_map: GIOP bank mapping code in PINT device + * @pint_assign: The 32-bit PINT registers can be divided into 2 parts. A + * GPIO bank can be mapped into either low 16 bits[0] or high 16 + * bits[1] of each PINT register. + * @lock: This lock make sure the irq_chip operations to one PINT device + * for different GPIO interrrupts are atomic. + * @chip: abstract a GPIO controller + * @domain: The irq domain owned by the GPIO port. + * @rsvmap: Reservation map array for each pin in the GPIO bank + */ +struct gpio_port { + struct list_head node; + void __iomem *base; + int irq_base; + unsigned int width; + struct gpio_port_t *regs; + struct gpio_port_saved saved_data; + struct device *dev; + + struct gpio_pint *pint; + u8 pint_map; + bool pint_assign; + + spinlock_t lock; + struct gpio_chip chip; + struct irq_domain *domain; +}; + +static inline u8 pin_to_offset(struct pinctrl_gpio_range *range, unsigned pin) +{ + return pin - range->pin_base; +} + +static inline u32 hwirq_to_pintbit(struct gpio_port *port, int hwirq) +{ + return port->pint_assign ? BIT(hwirq) << PINT_HI_OFFSET : BIT(hwirq); +} + +static struct gpio_pint *find_gpio_pint(unsigned id) +{ + struct gpio_pint *pint; + int i = 0; + + list_for_each_entry(pint, &adi_pint_list, node) { + if (id == i) + return pint; + i++; + } + + return NULL; +} + +static inline void port_setup(struct gpio_port *port, unsigned offset, + bool use_for_gpio) +{ + struct gpio_port_t *regs = port->regs; + + if (use_for_gpio) + writew(readw(®s->port_fer) & ~BIT(offset), + ®s->port_fer); + else + writew(readw(®s->port_fer) | BIT(offset), ®s->port_fer); +} + +static inline void portmux_setup(struct gpio_port *port, unsigned offset, + unsigned short function) +{ + struct gpio_port_t *regs = port->regs; + u32 pmux; + + pmux = readl(®s->port_mux); + + /* The function field of each pin has 2 consecutive bits in + * the mux register. + */ + pmux &= ~(0x3 << (2 * offset)); + pmux |= (function & 0x3) << (2 * offset); + + writel(pmux, ®s->port_mux); +} + +static inline u16 get_portmux(struct gpio_port *port, unsigned offset) +{ + struct gpio_port_t *regs = port->regs; + u32 pmux = readl(®s->port_mux); + + /* The function field of each pin has 2 consecutive bits in + * the mux register. + */ + return pmux >> (2 * offset) & 0x3; +} + +static void adi_gpio_ack_irq(struct irq_data *d) +{ + unsigned long flags; + struct gpio_port *port = irq_data_get_irq_chip_data(d); + struct gpio_pint_regs *regs = port->pint->regs; + unsigned pintbit = hwirq_to_pintbit(port, d->hwirq); + + spin_lock_irqsave(&port->lock, flags); + spin_lock(&port->pint->lock); + + if (irqd_get_trigger_type(d) == IRQ_TYPE_EDGE_BOTH) { + if (readl(®s->invert_set) & pintbit) + writel(pintbit, ®s->invert_clear); + else + writel(pintbit, ®s->invert_set); + } + + writel(pintbit, ®s->request); + + spin_unlock(&port->pint->lock); + spin_unlock_irqrestore(&port->lock, flags); +} + +static void adi_gpio_mask_ack_irq(struct irq_data *d) +{ + unsigned long flags; + struct gpio_port *port = irq_data_get_irq_chip_data(d); + struct gpio_pint_regs *regs = port->pint->regs; + unsigned pintbit = hwirq_to_pintbit(port, d->hwirq); + + spin_lock_irqsave(&port->lock, flags); + spin_lock(&port->pint->lock); + + if (irqd_get_trigger_type(d) == IRQ_TYPE_EDGE_BOTH) { + if (readl(®s->invert_set) & pintbit) + writel(pintbit, ®s->invert_clear); + else + writel(pintbit, ®s->invert_set); + } + + writel(pintbit, ®s->request); + writel(pintbit, ®s->mask_clear); + + spin_unlock(&port->pint->lock); + spin_unlock_irqrestore(&port->lock, flags); +} + +static void adi_gpio_mask_irq(struct irq_data *d) +{ + unsigned long flags; + struct gpio_port *port = irq_data_get_irq_chip_data(d); + struct gpio_pint_regs *regs = port->pint->regs; + + spin_lock_irqsave(&port->lock, flags); + spin_lock(&port->pint->lock); + + writel(hwirq_to_pintbit(port, d->hwirq), ®s->mask_clear); + + spin_unlock(&port->pint->lock); + spin_unlock_irqrestore(&port->lock, flags); +} + +static void adi_gpio_unmask_irq(struct irq_data *d) +{ + unsigned long flags; + struct gpio_port *port = irq_data_get_irq_chip_data(d); + struct gpio_pint_regs *regs = port->pint->regs; + + spin_lock_irqsave(&port->lock, flags); + spin_lock(&port->pint->lock); + + writel(hwirq_to_pintbit(port, d->hwirq), ®s->mask_set); + + spin_unlock(&port->pint->lock); + spin_unlock_irqrestore(&port->lock, flags); +} + +static unsigned int adi_gpio_irq_startup(struct irq_data *d) +{ + unsigned long flags; + struct gpio_port *port = irq_data_get_irq_chip_data(d); + struct gpio_pint_regs *regs; + + if (!port) { + pr_err("GPIO IRQ %d :Not exist\n", d->irq); + /* FIXME: negative return code will be ignored */ + return -ENODEV; + } + + regs = port->pint->regs; + + spin_lock_irqsave(&port->lock, flags); + spin_lock(&port->pint->lock); + + port_setup(port, d->hwirq, true); + writew(BIT(d->hwirq), &port->regs->dir_clear); + writew(readw(&port->regs->inen) | BIT(d->hwirq), &port->regs->inen); + + writel(hwirq_to_pintbit(port, d->hwirq), ®s->mask_set); + + spin_unlock(&port->pint->lock); + spin_unlock_irqrestore(&port->lock, flags); + + return 0; +} + +static void adi_gpio_irq_shutdown(struct irq_data *d) +{ + unsigned long flags; + struct gpio_port *port = irq_data_get_irq_chip_data(d); + struct gpio_pint_regs *regs = port->pint->regs; + + spin_lock_irqsave(&port->lock, flags); + spin_lock(&port->pint->lock); + + writel(hwirq_to_pintbit(port, d->hwirq), ®s->mask_clear); + + spin_unlock(&port->pint->lock); + spin_unlock_irqrestore(&port->lock, flags); +} + +static int adi_gpio_irq_type(struct irq_data *d, unsigned int type) +{ + unsigned long flags; + struct gpio_port *port = irq_data_get_irq_chip_data(d); + struct gpio_pint_regs *pint_regs; + unsigned pintmask; + unsigned int irq = d->irq; + int ret = 0; + char buf[16]; + + if (!port) { + pr_err("GPIO IRQ %d :Not exist\n", d->irq); + return -ENODEV; + } + + pint_regs = port->pint->regs; + + pintmask = hwirq_to_pintbit(port, d->hwirq); + + spin_lock_irqsave(&port->lock, flags); + spin_lock(&port->pint->lock); + + /* In case of interrupt autodetect, set irq type to edge sensitive. */ + if (type == IRQ_TYPE_PROBE) + type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; + + if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING | + IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) { + snprintf(buf, 16, "gpio-irq%u", irq); + port_setup(port, d->hwirq, true); + } else + goto out; + + /* The GPIO interrupt is triggered only when its input value + * transfer from 0 to 1. So, invert the input value if the + * irq type is low or falling + */ + if ((type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_LOW))) + writel(pintmask, &pint_regs->invert_set); + else + writel(pintmask, &pint_regs->invert_clear); + + /* In edge sensitive case, if the input value of the requested irq + * is already 1, invert it. + */ + if ((type & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH) { + if (gpio_get_value(port->chip.base + d->hwirq)) + writel(pintmask, &pint_regs->invert_set); + else + writel(pintmask, &pint_regs->invert_clear); + } + + if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) { + writel(pintmask, &pint_regs->edge_set); + __irq_set_handler_locked(irq, handle_edge_irq); + } else { + writel(pintmask, &pint_regs->edge_clear); + __irq_set_handler_locked(irq, handle_level_irq); + } + +out: + spin_unlock(&port->pint->lock); + spin_unlock_irqrestore(&port->lock, flags); + + return ret; +} + +#ifdef CONFIG_PM +static int adi_gpio_set_wake(struct irq_data *d, unsigned int state) +{ + struct gpio_port *port = irq_data_get_irq_chip_data(d); + + if (!port || !port->pint || port->pint->irq != d->irq) + return -EINVAL; + +#ifndef SEC_GCTL + adi_internal_set_wake(port->pint->irq, state); +#endif + + return 0; +} + +static int adi_pint_suspend(void) +{ + struct gpio_pint *pint; + + list_for_each_entry(pint, &adi_pint_list, node) { + writel(0xffffffff, &pint->regs->mask_clear); + pint->saved_data.assign = readl(&pint->regs->assign); + pint->saved_data.edge_set = readl(&pint->regs->edge_set); + pint->saved_data.invert_set = readl(&pint->regs->invert_set); + } + + return 0; +} + +static void adi_pint_resume(void) +{ + struct gpio_pint *pint; + + list_for_each_entry(pint, &adi_pint_list, node) { + writel(pint->saved_data.assign, &pint->regs->assign); + writel(pint->saved_data.edge_set, &pint->regs->edge_set); + writel(pint->saved_data.invert_set, &pint->regs->invert_set); + } +} + +static int adi_gpio_suspend(void) +{ + struct gpio_port *port; + + list_for_each_entry(port, &adi_gpio_port_list, node) { + port->saved_data.fer = readw(&port->regs->port_fer); + port->saved_data.mux = readl(&port->regs->port_mux); + port->saved_data.data = readw(&port->regs->data); + port->saved_data.inen = readw(&port->regs->inen); + port->saved_data.dir = readw(&port->regs->dir_set); + } + + return adi_pint_suspend(); +} + +static void adi_gpio_resume(void) +{ + struct gpio_port *port; + + adi_pint_resume(); + + list_for_each_entry(port, &adi_gpio_port_list, node) { + writel(port->saved_data.mux, &port->regs->port_mux); + writew(port->saved_data.fer, &port->regs->port_fer); + writew(port->saved_data.inen, &port->regs->inen); + writew(port->saved_data.data & port->saved_data.dir, + &port->regs->data_set); + writew(port->saved_data.dir, &port->regs->dir_set); + } + +} + +static struct syscore_ops gpio_pm_syscore_ops = { + .suspend = adi_gpio_suspend, + .resume = adi_gpio_resume, +}; +#else /* CONFIG_PM */ +#define adi_gpio_set_wake NULL +#endif /* CONFIG_PM */ + +#ifdef CONFIG_IRQ_PREFLOW_FASTEOI +static inline void preflow_handler(struct irq_desc *desc) +{ + if (desc->preflow_handler) + desc->preflow_handler(&desc->irq_data); +} +#else +static inline void preflow_handler(struct irq_desc *desc) { } +#endif + +static void adi_gpio_handle_pint_irq(unsigned int inta_irq, + struct irq_desc *desc) +{ + u32 request; + u32 level_mask, hwirq; + bool umask = false; + struct gpio_pint *pint = irq_desc_get_handler_data(desc); + struct irq_chip *chip = irq_desc_get_chip(desc); + struct gpio_pint_regs *regs = pint->regs; + struct irq_domain *domain; + + preflow_handler(desc); + chained_irq_enter(chip, desc); + + request = readl(®s->request); + level_mask = readl(®s->edge_set) & request; + + hwirq = 0; + domain = pint->domain[0]; + while (request) { + /* domain pointer need to be changed only once at IRQ 16 when + * we go through IRQ requests from bit 0 to bit 31. + */ + if (hwirq == PINT_HI_OFFSET) + domain = pint->domain[1]; + + if (request & 1) { + if (level_mask & BIT(hwirq)) { + umask = true; + chained_irq_exit(chip, desc); + } + generic_handle_irq(irq_find_mapping(domain, + hwirq % PINT_HI_OFFSET)); + } + + hwirq++; + request >>= 1; + } + + if (!umask) + chained_irq_exit(chip, desc); +} + +static struct irq_chip adi_gpio_irqchip = { + .name = "GPIO", + .irq_ack = adi_gpio_ack_irq, + .irq_mask = adi_gpio_mask_irq, + .irq_mask_ack = adi_gpio_mask_ack_irq, + .irq_unmask = adi_gpio_unmask_irq, + .irq_disable = adi_gpio_mask_irq, + .irq_enable = adi_gpio_unmask_irq, + .irq_set_type = adi_gpio_irq_type, + .irq_startup = adi_gpio_irq_startup, + .irq_shutdown = adi_gpio_irq_shutdown, + .irq_set_wake = adi_gpio_set_wake, +}; + +static int adi_get_groups_count(struct pinctrl_dev *pctldev) +{ + struct adi_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctldev); + + return pinctrl->soc->ngroups; +} + +static const char *adi_get_group_name(struct pinctrl_dev *pctldev, + unsigned selector) +{ + struct adi_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctldev); + + return pinctrl->soc->groups[selector].name; +} + +static int adi_get_group_pins(struct pinctrl_dev *pctldev, unsigned selector, + const unsigned **pins, + unsigned *num_pins) +{ + struct adi_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctldev); + + *pins = pinctrl->soc->groups[selector].pins; + *num_pins = pinctrl->soc->groups[selector].num; + return 0; +} + +static struct pinctrl_ops adi_pctrl_ops = { + .get_groups_count = adi_get_groups_count, + .get_group_name = adi_get_group_name, + .get_group_pins = adi_get_group_pins, +}; + +static int adi_pinmux_set(struct pinctrl_dev *pctldev, unsigned func_id, + unsigned group_id) +{ + struct adi_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctldev); + struct gpio_port *port; + struct pinctrl_gpio_range *range; + unsigned long flags; + unsigned short *mux, pin; + + mux = (unsigned short *)pinctrl->soc->groups[group_id].mux; + + while (*mux) { + pin = P_IDENT(*mux); + + range = pinctrl_find_gpio_range_from_pin(pctldev, pin); + if (range == NULL) /* should not happen */ + return -ENODEV; + + port = container_of(range->gc, struct gpio_port, chip); + + spin_lock_irqsave(&port->lock, flags); + + portmux_setup(port, pin_to_offset(range, pin), + P_FUNCT2MUX(*mux)); + port_setup(port, pin_to_offset(range, pin), false); + mux++; + + spin_unlock_irqrestore(&port->lock, flags); + } + + return 0; +} + +static int adi_pinmux_get_funcs_count(struct pinctrl_dev *pctldev) +{ + struct adi_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctldev); + + return pinctrl->soc->nfunctions; +} + +static const char *adi_pinmux_get_func_name(struct pinctrl_dev *pctldev, + unsigned selector) +{ + struct adi_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctldev); + + return pinctrl->soc->functions[selector].name; +} + +static int adi_pinmux_get_groups(struct pinctrl_dev *pctldev, unsigned selector, + const char * const **groups, + unsigned * const num_groups) +{ + struct adi_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctldev); + + *groups = pinctrl->soc->functions[selector].groups; + *num_groups = pinctrl->soc->functions[selector].num_groups; + return 0; +} + +static int adi_pinmux_request_gpio(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range, unsigned pin) +{ + struct gpio_port *port; + unsigned long flags; + u8 offset; + + port = container_of(range->gc, struct gpio_port, chip); + offset = pin_to_offset(range, pin); + + spin_lock_irqsave(&port->lock, flags); + + port_setup(port, offset, true); + + spin_unlock_irqrestore(&port->lock, flags); + + return 0; +} + +static struct pinmux_ops adi_pinmux_ops = { + .set_mux = adi_pinmux_set, + .get_functions_count = adi_pinmux_get_funcs_count, + .get_function_name = adi_pinmux_get_func_name, + .get_function_groups = adi_pinmux_get_groups, + .gpio_request_enable = adi_pinmux_request_gpio, +}; + + +static struct pinctrl_desc adi_pinmux_desc = { + .name = DRIVER_NAME, + .pctlops = &adi_pctrl_ops, + .pmxops = &adi_pinmux_ops, + .owner = THIS_MODULE, +}; + +static int adi_gpio_request(struct gpio_chip *chip, unsigned offset) +{ + return pinctrl_request_gpio(chip->base + offset); +} + +static void adi_gpio_free(struct gpio_chip *chip, unsigned offset) +{ + pinctrl_free_gpio(chip->base + offset); +} + +static int adi_gpio_direction_input(struct gpio_chip *chip, unsigned offset) +{ + struct gpio_port *port; + unsigned long flags; + + port = container_of(chip, struct gpio_port, chip); + + spin_lock_irqsave(&port->lock, flags); + + writew(BIT(offset), &port->regs->dir_clear); + writew(readw(&port->regs->inen) | BIT(offset), &port->regs->inen); + + spin_unlock_irqrestore(&port->lock, flags); + + return 0; +} + +static void adi_gpio_set_value(struct gpio_chip *chip, unsigned offset, + int value) +{ + struct gpio_port *port = container_of(chip, struct gpio_port, chip); + struct gpio_port_t *regs = port->regs; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + + if (value) + writew(BIT(offset), ®s->data_set); + else + writew(BIT(offset), ®s->data_clear); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static int adi_gpio_direction_output(struct gpio_chip *chip, unsigned offset, + int value) +{ + struct gpio_port *port = container_of(chip, struct gpio_port, chip); + struct gpio_port_t *regs = port->regs; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + + writew(readw(®s->inen) & ~BIT(offset), ®s->inen); + if (value) + writew(BIT(offset), ®s->data_set); + else + writew(BIT(offset), ®s->data_clear); + writew(BIT(offset), ®s->dir_set); + + spin_unlock_irqrestore(&port->lock, flags); + + return 0; +} + +static int adi_gpio_get_value(struct gpio_chip *chip, unsigned offset) +{ + struct gpio_port *port = container_of(chip, struct gpio_port, chip); + struct gpio_port_t *regs = port->regs; + unsigned long flags; + int ret; + + spin_lock_irqsave(&port->lock, flags); + + ret = !!(readw(®s->data) & BIT(offset)); + + spin_unlock_irqrestore(&port->lock, flags); + + return ret; +} + +static int adi_gpio_to_irq(struct gpio_chip *chip, unsigned offset) +{ + struct gpio_port *port = container_of(chip, struct gpio_port, chip); + + if (port->irq_base >= 0) + return irq_find_mapping(port->domain, offset); + else + return irq_create_mapping(port->domain, offset); +} + +static int adi_pint_map_port(struct gpio_pint *pint, bool assign, u8 map, + struct irq_domain *domain) +{ + struct gpio_pint_regs *regs = pint->regs; + u32 map_mask; + + if (pint->map_count > 1) + return -EINVAL; + + pint->map_count++; + + /* The map_mask of each gpio port is a 16-bit duplicate + * of the 8-bit map. It can be set to either high 16 bits or low + * 16 bits of the pint assignment register. + */ + map_mask = (map << 8) | map; + if (assign) { + map_mask <<= PINT_HI_OFFSET; + writel((readl(®s->assign) & 0xFFFF) | map_mask, + ®s->assign); + } else + writel((readl(®s->assign) & 0xFFFF0000) | map_mask, + ®s->assign); + + pint->domain[assign] = domain; + + return 0; +} + +static int adi_gpio_pint_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct resource *res; + struct gpio_pint *pint; + + pint = devm_kzalloc(dev, sizeof(struct gpio_pint), GFP_KERNEL); + if (!pint) { + dev_err(dev, "Memory alloc failed\n"); + return -ENOMEM; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + pint->base = devm_ioremap_resource(dev, res); + if (IS_ERR(pint->base)) + return PTR_ERR(pint->base); + + pint->regs = (struct gpio_pint_regs *)pint->base; + + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!res) { + dev_err(dev, "Invalid IRQ resource\n"); + return -ENODEV; + } + + spin_lock_init(&pint->lock); + + pint->irq = res->start; + pint->pint_map_port = adi_pint_map_port; + platform_set_drvdata(pdev, pint); + + irq_set_chained_handler(pint->irq, adi_gpio_handle_pint_irq); + irq_set_handler_data(pint->irq, pint); + + list_add_tail(&pint->node, &adi_pint_list); + + return 0; +} + +static int adi_gpio_pint_remove(struct platform_device *pdev) +{ + struct gpio_pint *pint = platform_get_drvdata(pdev); + + list_del(&pint->node); + irq_set_handler(pint->irq, handle_simple_irq); + + return 0; +} + +static int adi_gpio_irq_map(struct irq_domain *d, unsigned int irq, + irq_hw_number_t hwirq) +{ + struct gpio_port *port = d->host_data; + + if (!port) + return -EINVAL; + + irq_set_chip_data(irq, port); + irq_set_chip_and_handler(irq, &adi_gpio_irqchip, + handle_level_irq); + + return 0; +} + +static const struct irq_domain_ops adi_gpio_irq_domain_ops = { + .map = adi_gpio_irq_map, + .xlate = irq_domain_xlate_onecell, +}; + +static int adi_gpio_init_int(struct gpio_port *port) +{ + struct device_node *node = port->dev->of_node; + struct gpio_pint *pint = port->pint; + int ret; + + port->domain = irq_domain_add_linear(node, port->width, + &adi_gpio_irq_domain_ops, port); + if (!port->domain) { + dev_err(port->dev, "Failed to create irqdomain\n"); + return -ENOSYS; + } + + /* According to BF54x and BF60x HRM, pin interrupt devices are not + * part of the GPIO port device. in GPIO interrupt mode, the GPIO + * pins of multiple port devices can be routed into one pin interrupt + * device. The mapping can be configured by setting pint assignment + * register with the mapping value of different GPIO port. This is + * done via function pint_map_port(). + */ + ret = pint->pint_map_port(port->pint, port->pint_assign, + port->pint_map, port->domain); + if (ret) + return ret; + + if (port->irq_base >= 0) { + ret = irq_create_strict_mappings(port->domain, port->irq_base, + 0, port->width); + if (ret) { + dev_err(port->dev, "Couldn't associate to domain\n"); + return ret; + } + } + + return 0; +} + +#define DEVNAME_SIZE 16 + +static int adi_gpio_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + const struct adi_pinctrl_gpio_platform_data *pdata; + struct resource *res; + struct gpio_port *port; + char pinctrl_devname[DEVNAME_SIZE]; + static int gpio; + int ret = 0; + + pdata = dev->platform_data; + if (!pdata) + return -EINVAL; + + port = devm_kzalloc(dev, sizeof(struct gpio_port), GFP_KERNEL); + if (!port) { + dev_err(dev, "Memory alloc failed\n"); + return -ENOMEM; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + port->base = devm_ioremap_resource(dev, res); + if (IS_ERR(port->base)) + return PTR_ERR(port->base); + + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!res) + port->irq_base = -1; + else + port->irq_base = res->start; + + port->width = pdata->port_width; + port->dev = dev; + port->regs = (struct gpio_port_t *)port->base; + port->pint_assign = pdata->pint_assign; + port->pint_map = pdata->pint_map; + + port->pint = find_gpio_pint(pdata->pint_id); + if (port->pint) { + ret = adi_gpio_init_int(port); + if (ret) + return ret; + } + + spin_lock_init(&port->lock); + + platform_set_drvdata(pdev, port); + + port->chip.label = "adi-gpio"; + port->chip.direction_input = adi_gpio_direction_input; + port->chip.get = adi_gpio_get_value; + port->chip.direction_output = adi_gpio_direction_output; + port->chip.set = adi_gpio_set_value; + port->chip.request = adi_gpio_request; + port->chip.free = adi_gpio_free; + port->chip.to_irq = adi_gpio_to_irq; + if (pdata->port_gpio_base > 0) + port->chip.base = pdata->port_gpio_base; + else + port->chip.base = gpio; + port->chip.ngpio = port->width; + gpio = port->chip.base + port->width; + + ret = gpiochip_add(&port->chip); + if (ret) { + dev_err(&pdev->dev, "Fail to add GPIO chip.\n"); + goto out_remove_domain; + } + + /* Add gpio pin range */ + snprintf(pinctrl_devname, DEVNAME_SIZE, "pinctrl-adi2.%d", + pdata->pinctrl_id); + pinctrl_devname[DEVNAME_SIZE - 1] = 0; + ret = gpiochip_add_pin_range(&port->chip, pinctrl_devname, + 0, pdata->port_pin_base, port->width); + if (ret) { + dev_err(&pdev->dev, "Fail to add pin range to %s.\n", + pinctrl_devname); + goto out_remove_gpiochip; + } + + list_add_tail(&port->node, &adi_gpio_port_list); + + return 0; + +out_remove_gpiochip: + gpiochip_remove(&port->chip); +out_remove_domain: + if (port->pint) + irq_domain_remove(port->domain); + + return ret; +} + +static int adi_gpio_remove(struct platform_device *pdev) +{ + struct gpio_port *port = platform_get_drvdata(pdev); + u8 offset; + + list_del(&port->node); + gpiochip_remove(&port->chip); + if (port->pint) { + for (offset = 0; offset < port->width; offset++) + irq_dispose_mapping(irq_find_mapping(port->domain, + offset)); + irq_domain_remove(port->domain); + } + + return 0; +} + +static int adi_pinctrl_probe(struct platform_device *pdev) +{ + struct adi_pinctrl *pinctrl; + + pinctrl = devm_kzalloc(&pdev->dev, sizeof(*pinctrl), GFP_KERNEL); + if (!pinctrl) + return -ENOMEM; + + pinctrl->dev = &pdev->dev; + + adi_pinctrl_soc_init(&pinctrl->soc); + + adi_pinmux_desc.pins = pinctrl->soc->pins; + adi_pinmux_desc.npins = pinctrl->soc->npins; + + /* Now register the pin controller and all pins it handles */ + pinctrl->pctl = pinctrl_register(&adi_pinmux_desc, &pdev->dev, pinctrl); + if (!pinctrl->pctl) { + dev_err(&pdev->dev, "could not register pinctrl ADI2 driver\n"); + return -EINVAL; + } + + platform_set_drvdata(pdev, pinctrl); + + return 0; +} + +static int adi_pinctrl_remove(struct platform_device *pdev) +{ + struct adi_pinctrl *pinctrl = platform_get_drvdata(pdev); + + pinctrl_unregister(pinctrl->pctl); + + return 0; +} + +static struct platform_driver adi_pinctrl_driver = { + .probe = adi_pinctrl_probe, + .remove = adi_pinctrl_remove, + .driver = { + .name = DRIVER_NAME, + }, +}; + +static struct platform_driver adi_gpio_pint_driver = { + .probe = adi_gpio_pint_probe, + .remove = adi_gpio_pint_remove, + .driver = { + .name = "adi-gpio-pint", + }, +}; + +static struct platform_driver adi_gpio_driver = { + .probe = adi_gpio_probe, + .remove = adi_gpio_remove, + .driver = { + .name = "adi-gpio", + }, +}; + +static int __init adi_pinctrl_setup(void) +{ + int ret; + + ret = platform_driver_register(&adi_pinctrl_driver); + if (ret) + return ret; + + ret = platform_driver_register(&adi_gpio_pint_driver); + if (ret) + goto pint_error; + + ret = platform_driver_register(&adi_gpio_driver); + if (ret) + goto gpio_error; + +#ifdef CONFIG_PM + register_syscore_ops(&gpio_pm_syscore_ops); +#endif + return ret; +gpio_error: + platform_driver_unregister(&adi_gpio_pint_driver); +pint_error: + platform_driver_unregister(&adi_pinctrl_driver); + + return ret; +} +arch_initcall(adi_pinctrl_setup); + +MODULE_AUTHOR("Sonic Zhang <sonic.zhang@analog.com>"); +MODULE_DESCRIPTION("ADI gpio2 pin control driver"); +MODULE_LICENSE("GPL"); |