Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

1 files changed, 159 insertions, 0 deletions

diff --git a/kernel/drivers/phy/phy-qcom-ufs-i.h b/kernel/drivers/phy/phy-qcom-ufs-i.h
new file mode 100644
index 000000000..591a39175
--- /dev/null
+++ b/kernel/drivers/phy/phy-qcom-ufs-i.h
@@ -0,0 +1,159 @@
+/*
+ * Copyright (c) 2013-2015, Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef UFS_QCOM_PHY_I_H_
+#define UFS_QCOM_PHY_I_H_
+
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/phy/phy-qcom-ufs.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+
+#define readl_poll_timeout(addr, val, cond, sleep_us, timeout_us) \
+({ \
+	ktime_t timeout = ktime_add_us(ktime_get(), timeout_us); \
+	might_sleep_if(timeout_us); \
+	for (;;) { \
+		(val) = readl(addr); \
+		if (cond) \
+			break; \
+		if (timeout_us && ktime_compare(ktime_get(), timeout) > 0) { \
+			(val) = readl(addr); \
+			break; \
+		} \
+		if (sleep_us) \
+			usleep_range(DIV_ROUND_UP(sleep_us, 4), sleep_us); \
+	} \
+	(cond) ? 0 : -ETIMEDOUT; \
+})
+
+#define UFS_QCOM_PHY_CAL_ENTRY(reg, val)	\
+	{				\
+		.reg_offset = reg,	\
+		.cfg_value = val,	\
+	}
+
+#define UFS_QCOM_PHY_NAME_LEN	30
+
+enum {
+	MASK_SERDES_START       = 0x1,
+	MASK_PCS_READY          = 0x1,
+};
+
+enum {
+	OFFSET_SERDES_START     = 0x0,
+};
+
+struct ufs_qcom_phy_stored_attributes {
+	u32 att;
+	u32 value;
+};
+
+
+struct ufs_qcom_phy_calibration {
+	u32 reg_offset;
+	u32 cfg_value;
+};
+
+struct ufs_qcom_phy_vreg {
+	const char *name;
+	struct regulator *reg;
+	int max_uA;
+	int min_uV;
+	int max_uV;
+	bool enabled;
+	bool is_always_on;
+};
+
+struct ufs_qcom_phy {
+	struct list_head list;
+	struct device *dev;
+	void __iomem *mmio;
+	void __iomem *dev_ref_clk_ctrl_mmio;
+	struct clk *tx_iface_clk;
+	struct clk *rx_iface_clk;
+	bool is_iface_clk_enabled;
+	struct clk *ref_clk_src;
+	struct clk *ref_clk_parent;
+	struct clk *ref_clk;
+	bool is_ref_clk_enabled;
+	bool is_dev_ref_clk_enabled;
+	struct ufs_qcom_phy_vreg vdda_pll;
+	struct ufs_qcom_phy_vreg vdda_phy;
+	struct ufs_qcom_phy_vreg vddp_ref_clk;
+	unsigned int quirks;
+
+	/*
+	* If UFS link is put into Hibern8 and if UFS PHY analog hardware is
+	* power collapsed (by clearing UFS_PHY_POWER_DOWN_CONTROL), Hibern8
+	* exit might fail even after powering on UFS PHY analog hardware.
+	* Enabling this quirk will help to solve above issue by doing
+	* custom PHY settings just before PHY analog power collapse.
+	*/
+	#define UFS_QCOM_PHY_QUIRK_HIBERN8_EXIT_AFTER_PHY_PWR_COLLAPSE	BIT(0)
+
+	u8 host_ctrl_rev_major;
+	u16 host_ctrl_rev_minor;
+	u16 host_ctrl_rev_step;
+
+	char name[UFS_QCOM_PHY_NAME_LEN];
+	struct ufs_qcom_phy_calibration *cached_regs;
+	int cached_regs_table_size;
+	bool is_powered_on;
+	struct ufs_qcom_phy_specific_ops *phy_spec_ops;
+};
+
+/**
+ * struct ufs_qcom_phy_specific_ops - set of pointers to functions which have a
+ * specific implementation per phy. Each UFS phy, should implement
+ * those functions according to its spec and requirements
+ * @calibrate_phy: pointer to a function that calibrate the phy
+ * @start_serdes: pointer to a function that starts the serdes
+ * @is_physical_coding_sublayer_ready: pointer to a function that
+ * checks pcs readiness. returns 0 for success and non-zero for error.
+ * @set_tx_lane_enable: pointer to a function that enable tx lanes
+ * @power_control: pointer to a function that controls analog rail of phy
+ * and writes to QSERDES_RX_SIGDET_CNTRL attribute
+ */
+struct ufs_qcom_phy_specific_ops {
+	int (*calibrate_phy)(struct ufs_qcom_phy *phy, bool is_rate_B);
+	void (*start_serdes)(struct ufs_qcom_phy *phy);
+	int (*is_physical_coding_sublayer_ready)(struct ufs_qcom_phy *phy);
+	void (*set_tx_lane_enable)(struct ufs_qcom_phy *phy, u32 val);
+	void (*power_control)(struct ufs_qcom_phy *phy, bool val);
+};
+
+struct ufs_qcom_phy *get_ufs_qcom_phy(struct phy *generic_phy);
+int ufs_qcom_phy_power_on(struct phy *generic_phy);
+int ufs_qcom_phy_power_off(struct phy *generic_phy);
+int ufs_qcom_phy_exit(struct phy *generic_phy);
+int ufs_qcom_phy_init_clks(struct phy *generic_phy,
+			struct ufs_qcom_phy *phy_common);
+int ufs_qcom_phy_init_vregulators(struct phy *generic_phy,
+			struct ufs_qcom_phy *phy_common);
+int ufs_qcom_phy_remove(struct phy *generic_phy,
+		       struct ufs_qcom_phy *ufs_qcom_phy);
+struct phy *ufs_qcom_phy_generic_probe(struct platform_device *pdev,
+			struct ufs_qcom_phy *common_cfg,
+			struct phy_ops *ufs_qcom_phy_gen_ops,
+			struct ufs_qcom_phy_specific_ops *phy_spec_ops);
+int ufs_qcom_phy_calibrate(struct ufs_qcom_phy *ufs_qcom_phy,
+			struct ufs_qcom_phy_calibration *tbl_A, int tbl_size_A,
+			struct ufs_qcom_phy_calibration *tbl_B, int tbl_size_B,
+			bool is_rate_B);
+#endif