diff options
| author |   Yunhong Jiang <yunhong.jiang@intel.com> | 2015-08-04 12:17:53 -0700 |
|---|---|---|
| committer | Yunhong Jiang <yunhong.jiang@intel.com> | 2015-08-04 15:44:42 -0700 |
| commit | 9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 (patch) | |
| tree | 1c9cafbcd35f783a87880a10f85d1a060db1a563 /kernel/drivers/pci/quirks.c | |
| parent | 98260f3884f4a202f9ca5eabed40b1354c489b29 (diff) | |
Add the rt linux 4.1.3-rt3 as base
Import the rt linux 4.1.3-rt3 as OPNFV kvm base.
It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:
commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Sat Jul 25 12:13:34 2015 +0200
Prepare v4.1.3-rt3
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.
Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>
Diffstat (limited to 'kernel/drivers/pci/quirks.c')
| -rw-r--r-- | kernel/drivers/pci/quirks.c | 4015 |
1 files changed, 4015 insertions, 0 deletions
diff --git a/kernel/drivers/pci/quirks.c b/kernel/drivers/pci/quirks.c new file mode 100644 index 000000000..c6dc1dfd2 --- /dev/null +++ b/kernel/drivers/pci/quirks.c @@ -0,0 +1,4015 @@ +/* + * This file contains work-arounds for many known PCI hardware + * bugs. Devices present only on certain architectures (host + * bridges et cetera) should be handled in arch-specific code. + * + * Note: any quirks for hotpluggable devices must _NOT_ be declared __init. + * + * Copyright (c) 1999 Martin Mares <mj@ucw.cz> + * + * Init/reset quirks for USB host controllers should be in the + * USB quirks file, where their drivers can access reuse it. + */ + +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/export.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/acpi.h> +#include <linux/kallsyms.h> +#include <linux/dmi.h> +#include <linux/pci-aspm.h> +#include <linux/ioport.h> +#include <linux/sched.h> +#include <linux/ktime.h> +#include <linux/mm.h> +#include <asm/dma.h> /* isa_dma_bridge_buggy */ +#include "pci.h" + +/* + * Decoding should be disabled for a PCI device during BAR sizing to avoid + * conflict. But doing so may cause problems on host bridge and perhaps other + * key system devices. For devices that need to have mmio decoding always-on, + * we need to set the dev->mmio_always_on bit. + */ +static void quirk_mmio_always_on(struct pci_dev *dev) +{ + dev->mmio_always_on = 1; +} +DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_BRIDGE_HOST, 8, quirk_mmio_always_on); + +/* The Mellanox Tavor device gives false positive parity errors + * Mark this device with a broken_parity_status, to allow + * PCI scanning code to "skip" this now blacklisted device. + */ +static void quirk_mellanox_tavor(struct pci_dev *dev) +{ + dev->broken_parity_status = 1; /* This device gives false positives */ +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX, PCI_DEVICE_ID_MELLANOX_TAVOR, quirk_mellanox_tavor); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX, PCI_DEVICE_ID_MELLANOX_TAVOR_BRIDGE, quirk_mellanox_tavor); + +/* Deal with broken BIOSes that neglect to enable passive release, + which can cause problems in combination with the 82441FX/PPro MTRRs */ +static void quirk_passive_release(struct pci_dev *dev) +{ + struct pci_dev *d = NULL; + unsigned char dlc; + + /* We have to make sure a particular bit is set in the PIIX3 + ISA bridge, so we have to go out and find it. */ + while ((d = pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_0, d))) { + pci_read_config_byte(d, 0x82, &dlc); + if (!(dlc & 1<<1)) { + dev_info(&d->dev, "PIIX3: Enabling Passive Release\n"); + dlc |= 1<<1; + pci_write_config_byte(d, 0x82, dlc); + } + } +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_passive_release); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_passive_release); + +/* The VIA VP2/VP3/MVP3 seem to have some 'features'. There may be a workaround + but VIA don't answer queries. If you happen to have good contacts at VIA + ask them for me please -- Alan + + This appears to be BIOS not version dependent. So presumably there is a + chipset level fix */ + +static void quirk_isa_dma_hangs(struct pci_dev *dev) +{ + if (!isa_dma_bridge_buggy) { + isa_dma_bridge_buggy = 1; + dev_info(&dev->dev, "Activating ISA DMA hang workarounds\n"); + } +} + /* + * Its not totally clear which chipsets are the problematic ones + * We know 82C586 and 82C596 variants are affected. + */ +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_0, quirk_isa_dma_hangs); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C596, quirk_isa_dma_hangs); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_0, quirk_isa_dma_hangs); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, quirk_isa_dma_hangs); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_1, quirk_isa_dma_hangs); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_2, quirk_isa_dma_hangs); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_3, quirk_isa_dma_hangs); + +/* + * Intel NM10 "TigerPoint" LPC PM1a_STS.BM_STS must be clear + * for some HT machines to use C4 w/o hanging. + */ +static void quirk_tigerpoint_bm_sts(struct pci_dev *dev) +{ + u32 pmbase; + u16 pm1a; + + pci_read_config_dword(dev, 0x40, &pmbase); + pmbase = pmbase & 0xff80; + pm1a = inw(pmbase); + + if (pm1a & 0x10) { + dev_info(&dev->dev, FW_BUG "TigerPoint LPC.BM_STS cleared\n"); + outw(0x10, pmbase); + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TGP_LPC, quirk_tigerpoint_bm_sts); + +/* + * Chipsets where PCI->PCI transfers vanish or hang + */ +static void quirk_nopcipci(struct pci_dev *dev) +{ + if ((pci_pci_problems & PCIPCI_FAIL) == 0) { + dev_info(&dev->dev, "Disabling direct PCI/PCI transfers\n"); + pci_pci_problems |= PCIPCI_FAIL; + } +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5597, quirk_nopcipci); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_496, quirk_nopcipci); + +static void quirk_nopciamd(struct pci_dev *dev) +{ + u8 rev; + pci_read_config_byte(dev, 0x08, &rev); + if (rev == 0x13) { + /* Erratum 24 */ + dev_info(&dev->dev, "Chipset erratum: Disabling direct PCI/AGP transfers\n"); + pci_pci_problems |= PCIAGP_FAIL; + } +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8151_0, quirk_nopciamd); + +/* + * Triton requires workarounds to be used by the drivers + */ +static void quirk_triton(struct pci_dev *dev) +{ + if ((pci_pci_problems&PCIPCI_TRITON) == 0) { + dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n"); + pci_pci_problems |= PCIPCI_TRITON; + } +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82437, quirk_triton); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82437VX, quirk_triton); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82439, quirk_triton); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82439TX, quirk_triton); + +/* + * VIA Apollo KT133 needs PCI latency patch + * Made according to a windows driver based patch by George E. Breese + * see PCI Latency Adjust on http://www.viahardware.com/download/viatweak.shtm + * and http://www.georgebreese.com/net/software/#PCI + * Also see http://www.au-ja.org/review-kt133a-1-en.phtml for + * the info on which Mr Breese based his work. + * + * Updated based on further information from the site and also on + * information provided by VIA + */ +static void quirk_vialatency(struct pci_dev *dev) +{ + struct pci_dev *p; + u8 busarb; + /* Ok we have a potential problem chipset here. Now see if we have + a buggy southbridge */ + + p = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, NULL); + if (p != NULL) { + /* 0x40 - 0x4f == 686B, 0x10 - 0x2f == 686A; thanks Dan Hollis */ + /* Check for buggy part revisions */ + if (p->revision < 0x40 || p->revision > 0x42) + goto exit; + } else { + p = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, NULL); + if (p == NULL) /* No problem parts */ + goto exit; + /* Check for buggy part revisions */ + if (p->revision < 0x10 || p->revision > 0x12) + goto exit; + } + + /* + * Ok we have the problem. Now set the PCI master grant to + * occur every master grant. The apparent bug is that under high + * PCI load (quite common in Linux of course) you can get data + * loss when the CPU is held off the bus for 3 bus master requests + * This happens to include the IDE controllers.... + * + * VIA only apply this fix when an SB Live! is present but under + * both Linux and Windows this isn't enough, and we have seen + * corruption without SB Live! but with things like 3 UDMA IDE + * controllers. So we ignore that bit of the VIA recommendation.. + */ + + pci_read_config_byte(dev, 0x76, &busarb); + /* Set bit 4 and bi 5 of byte 76 to 0x01 + "Master priority rotation on every PCI master grant */ + busarb &= ~(1<<5); + busarb |= (1<<4); + pci_write_config_byte(dev, 0x76, busarb); + dev_info(&dev->dev, "Applying VIA southbridge workaround\n"); +exit: + pci_dev_put(p); +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, quirk_vialatency); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8371_1, quirk_vialatency); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, quirk_vialatency); +/* Must restore this on a resume from RAM */ +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, quirk_vialatency); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8371_1, quirk_vialatency); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, quirk_vialatency); + +/* + * VIA Apollo VP3 needs ETBF on BT848/878 + */ +static void quirk_viaetbf(struct pci_dev *dev) +{ + if ((pci_pci_problems&PCIPCI_VIAETBF) == 0) { + dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n"); + pci_pci_problems |= PCIPCI_VIAETBF; + } +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C597_0, quirk_viaetbf); + +static void quirk_vsfx(struct pci_dev *dev) +{ + if ((pci_pci_problems&PCIPCI_VSFX) == 0) { + dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n"); + pci_pci_problems |= PCIPCI_VSFX; + } +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C576, quirk_vsfx); + +/* + * Ali Magik requires workarounds to be used by the drivers + * that DMA to AGP space. Latency must be set to 0xA and triton + * workaround applied too + * [Info kindly provided by ALi] + */ +static void quirk_alimagik(struct pci_dev *dev) +{ + if ((pci_pci_problems&PCIPCI_ALIMAGIK) == 0) { + dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n"); + pci_pci_problems |= PCIPCI_ALIMAGIK|PCIPCI_TRITON; + } +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1647, quirk_alimagik); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1651, quirk_alimagik); + +/* + * Natoma has some interesting boundary conditions with Zoran stuff + * at least + */ +static void quirk_natoma(struct pci_dev *dev) +{ + if ((pci_pci_problems&PCIPCI_NATOMA) == 0) { + dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n"); + pci_pci_problems |= PCIPCI_NATOMA; + } +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_natoma); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443LX_0, quirk_natoma); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443LX_1, quirk_natoma); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_0, quirk_natoma); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_1, quirk_natoma); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_2, quirk_natoma); + +/* + * This chip can cause PCI parity errors if config register 0xA0 is read + * while DMAs are occurring. + */ +static void quirk_citrine(struct pci_dev *dev) +{ + dev->cfg_size = 0xA0; +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE, quirk_citrine); + +/* On IBM Crocodile ipr SAS adapters, expand BAR to system page size */ +static void quirk_extend_bar_to_page(struct pci_dev *dev) +{ + int i; + + for (i = 0; i < PCI_STD_RESOURCE_END; i++) { + struct resource *r = &dev->resource[i]; + + if (r->flags & IORESOURCE_MEM && resource_size(r) < PAGE_SIZE) { + r->end = PAGE_SIZE - 1; + r->start = 0; + r->flags |= IORESOURCE_UNSET; + dev_info(&dev->dev, "expanded BAR %d to page size: %pR\n", + i, r); + } + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM, 0x034a, quirk_extend_bar_to_page); + +/* + * S3 868 and 968 chips report region size equal to 32M, but they decode 64M. + * If it's needed, re-allocate the region. + */ +static void quirk_s3_64M(struct pci_dev *dev) +{ + struct resource *r = &dev->resource[0]; + + if ((r->start & 0x3ffffff) || r->end != r->start + 0x3ffffff) { + r->flags |= IORESOURCE_UNSET; + r->start = 0; + r->end = 0x3ffffff; + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_868, quirk_s3_64M); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_968, quirk_s3_64M); + +static void quirk_io(struct pci_dev *dev, int pos, unsigned size, + const char *name) +{ + u32 region; + struct pci_bus_region bus_region; + struct resource *res = dev->resource + pos; + + pci_read_config_dword(dev, PCI_BASE_ADDRESS_0 + (pos << 2), ®ion); + + if (!region) + return; + + res->name = pci_name(dev); + res->flags = region & ~PCI_BASE_ADDRESS_IO_MASK; + res->flags |= + (IORESOURCE_IO | IORESOURCE_PCI_FIXED | IORESOURCE_SIZEALIGN); + region &= ~(size - 1); + + /* Convert from PCI bus to resource space */ + bus_region.start = region; + bus_region.end = region + size - 1; + pcibios_bus_to_resource(dev->bus, res, &bus_region); + + dev_info(&dev->dev, FW_BUG "%s quirk: reg 0x%x: %pR\n", + name, PCI_BASE_ADDRESS_0 + (pos << 2), res); +} + +/* + * Some CS5536 BIOSes (for example, the Soekris NET5501 board w/ comBIOS + * ver. 1.33 20070103) don't set the correct ISA PCI region header info. + * BAR0 should be 8 bytes; instead, it may be set to something like 8k + * (which conflicts w/ BAR1's memory range). + * + * CS553x's ISA PCI BARs may also be read-only (ref: + * https://bugzilla.kernel.org/show_bug.cgi?id=85991 - Comment #4 forward). + */ +static void quirk_cs5536_vsa(struct pci_dev *dev) +{ + static char *name = "CS5536 ISA bridge"; + + if (pci_resource_len(dev, 0) != 8) { + quirk_io(dev, 0, 8, name); /* SMB */ + quirk_io(dev, 1, 256, name); /* GPIO */ + quirk_io(dev, 2, 64, name); /* MFGPT */ + dev_info(&dev->dev, "%s bug detected (incorrect header); workaround applied\n", + name); + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, quirk_cs5536_vsa); + +static void quirk_io_region(struct pci_dev *dev, int port, + unsigned size, int nr, const char *name) +{ + u16 region; + struct pci_bus_region bus_region; + struct resource *res = dev->resource + nr; + + pci_read_config_word(dev, port, ®ion); + region &= ~(size - 1); + + if (!region) + return; + + res->name = pci_name(dev); + res->flags = IORESOURCE_IO; + + /* Convert from PCI bus to resource space */ + bus_region.start = region; + bus_region.end = region + size - 1; + pcibios_bus_to_resource(dev->bus, res, &bus_region); + + if (!pci_claim_resource(dev, nr)) + dev_info(&dev->dev, "quirk: %pR claimed by %s\n", res, name); +} + +/* + * ATI Northbridge setups MCE the processor if you even + * read somewhere between 0x3b0->0x3bb or read 0x3d3 + */ +static void quirk_ati_exploding_mce(struct pci_dev *dev) +{ + dev_info(&dev->dev, "ATI Northbridge, reserving I/O ports 0x3b0 to 0x3bb\n"); + /* Mae rhaid i ni beidio ag edrych ar y lleoliadiau I/O hyn */ + request_region(0x3b0, 0x0C, "RadeonIGP"); + request_region(0x3d3, 0x01, "RadeonIGP"); +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS100, quirk_ati_exploding_mce); + +/* + * In the AMD NL platform, this device ([1022:7912]) has a class code of + * PCI_CLASS_SERIAL_USB_XHCI (0x0c0330), which means the xhci driver will + * claim it. + * But the dwc3 driver is a more specific driver for this device, and we'd + * prefer to use it instead of xhci. To prevent xhci from claiming the + * device, change the class code to 0x0c03fe, which the PCI r3.0 spec + * defines as "USB device (not host controller)". The dwc3 driver can then + * claim it based on its Vendor and Device ID. + */ +static void quirk_amd_nl_class(struct pci_dev *pdev) +{ + /* + * Use 'USB Device' (0x0c03fe) instead of PCI header provided + */ + pdev->class = 0x0c03fe; +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_NL_USB, + quirk_amd_nl_class); + +/* + * Let's make the southbridge information explicit instead + * of having to worry about people probing the ACPI areas, + * for example.. (Yes, it happens, and if you read the wrong + * ACPI register it will put the machine to sleep with no + * way of waking it up again. Bummer). + * + * ALI M7101: Two IO regions pointed to by words at + * 0xE0 (64 bytes of ACPI registers) + * 0xE2 (32 bytes of SMB registers) + */ +static void quirk_ali7101_acpi(struct pci_dev *dev) +{ + quirk_io_region(dev, 0xE0, 64, PCI_BRIDGE_RESOURCES, "ali7101 ACPI"); + quirk_io_region(dev, 0xE2, 32, PCI_BRIDGE_RESOURCES+1, "ali7101 SMB"); +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101, quirk_ali7101_acpi); + +static void piix4_io_quirk(struct pci_dev *dev, const char *name, unsigned int port, unsigned int enable) +{ + u32 devres; + u32 mask, size, base; + + pci_read_config_dword(dev, port, &devres); + if ((devres & enable) != enable) + return; + mask = (devres >> 16) & 15; + base = devres & 0xffff; + size = 16; + for (;;) { + unsigned bit = size >> 1; + if ((bit & mask) == bit) + break; + size = bit; + } + /* + * For now we only print it out. Eventually we'll want to + * reserve it (at least if it's in the 0x1000+ range), but + * let's get enough confirmation reports first. + */ + base &= -size; + dev_info(&dev->dev, "%s PIO at %04x-%04x\n", name, base, + base + size - 1); +} + +static void piix4_mem_quirk(struct pci_dev *dev, const char *name, unsigned int port, unsigned int enable) +{ + u32 devres; + u32 mask, size, base; + + pci_read_config_dword(dev, port, &devres); + if ((devres & enable) != enable) + return; + base = devres & 0xffff0000; + mask = (devres & 0x3f) << 16; + size = 128 << 16; + for (;;) { + unsigned bit = size >> 1; + if ((bit & mask) == bit) + break; + size = bit; + } + /* + * For now we only print it out. Eventually we'll want to + * reserve it, but let's get enough confirmation reports first. + */ + base &= -size; + dev_info(&dev->dev, "%s MMIO at %04x-%04x\n", name, base, + base + size - 1); +} + +/* + * PIIX4 ACPI: Two IO regions pointed to by longwords at + * 0x40 (64 bytes of ACPI registers) + * 0x90 (16 bytes of SMB registers) + * and a few strange programmable PIIX4 device resources. + */ +static void quirk_piix4_acpi(struct pci_dev *dev) +{ + u32 res_a; + + quirk_io_region(dev, 0x40, 64, PCI_BRIDGE_RESOURCES, "PIIX4 ACPI"); + quirk_io_region(dev, 0x90, 16, PCI_BRIDGE_RESOURCES+1, "PIIX4 SMB"); + + /* Device resource A has enables for some of the other ones */ + pci_read_config_dword(dev, 0x5c, &res_a); + + piix4_io_quirk(dev, "PIIX4 devres B", 0x60, 3 << 21); + piix4_io_quirk(dev, "PIIX4 devres C", 0x64, 3 << 21); + + /* Device resource D is just bitfields for static resources */ + + /* Device 12 enabled? */ + if (res_a & (1 << 29)) { + piix4_io_quirk(dev, "PIIX4 devres E", 0x68, 1 << 20); + piix4_mem_quirk(dev, "PIIX4 devres F", 0x6c, 1 << 7); + } + /* Device 13 enabled? */ + if (res_a & (1 << 30)) { + piix4_io_quirk(dev, "PIIX4 devres G", 0x70, 1 << 20); + piix4_mem_quirk(dev, "PIIX4 devres H", 0x74, 1 << 7); + } + piix4_io_quirk(dev, "PIIX4 devres I", 0x78, 1 << 20); + piix4_io_quirk(dev, "PIIX4 devres J", 0x7c, 1 << 20); +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3, quirk_piix4_acpi); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_3, quirk_piix4_acpi); + +#define ICH_PMBASE 0x40 +#define ICH_ACPI_CNTL 0x44 +#define ICH4_ACPI_EN 0x10 +#define ICH6_ACPI_EN 0x80 +#define ICH4_GPIOBASE 0x58 +#define ICH4_GPIO_CNTL 0x5c +#define ICH4_GPIO_EN 0x10 +#define ICH6_GPIOBASE 0x48 +#define ICH6_GPIO_CNTL 0x4c +#define ICH6_GPIO_EN 0x10 + +/* + * ICH4, ICH4-M, ICH5, ICH5-M ACPI: Three IO regions pointed to by longwords at + * 0x40 (128 bytes of ACPI, GPIO & TCO registers) + * 0x58 (64 bytes of GPIO I/O space) + */ +static void quirk_ich4_lpc_acpi(struct pci_dev *dev) +{ + u8 enable; + + /* + * The check for PCIBIOS_MIN_IO is to ensure we won't create a conflict + * with low legacy (and fixed) ports. We don't know the decoding + * priority and can't tell whether the legacy device or the one created + * here is really at that address. This happens on boards with broken + * BIOSes. + */ + + pci_read_config_byte(dev, ICH_ACPI_CNTL, &enable); + if (enable & ICH4_ACPI_EN) + quirk_io_region(dev, ICH_PMBASE, 128, PCI_BRIDGE_RESOURCES, + "ICH4 ACPI/GPIO/TCO"); + + pci_read_config_byte(dev, ICH4_GPIO_CNTL, &enable); + if (enable & ICH4_GPIO_EN) + quirk_io_region(dev, ICH4_GPIOBASE, 64, PCI_BRIDGE_RESOURCES+1, + "ICH4 GPIO"); +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, quirk_ich4_lpc_acpi); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_0, quirk_ich4_lpc_acpi); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, quirk_ich4_lpc_acpi); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_10, quirk_ich4_lpc_acpi); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, quirk_ich4_lpc_acpi); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, quirk_ich4_lpc_acpi); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, quirk_ich4_lpc_acpi); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, quirk_ich4_lpc_acpi); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, quirk_ich4_lpc_acpi); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1, quirk_ich4_lpc_acpi); + +static void ich6_lpc_acpi_gpio(struct pci_dev *dev) +{ + u8 enable; + + pci_read_config_byte(dev, ICH_ACPI_CNTL, &enable); + if (enable & ICH6_ACPI_EN) + quirk_io_region(dev, ICH_PMBASE, 128, PCI_BRIDGE_RESOURCES, + "ICH6 ACPI/GPIO/TCO"); + + pci_read_config_byte(dev, ICH6_GPIO_CNTL, &enable); + if (enable & ICH6_GPIO_EN) + quirk_io_region(dev, ICH6_GPIOBASE, 64, PCI_BRIDGE_RESOURCES+1, + "ICH6 GPIO"); +} + +static void ich6_lpc_generic_decode(struct pci_dev *dev, unsigned reg, const char *name, int dynsize) +{ + u32 val; + u32 size, base; + + pci_read_config_dword(dev, reg, &val); + + /* Enabled? */ + if (!(val & 1)) + return; + base = val & 0xfffc; + if (dynsize) { + /* + * This is not correct. It is 16, 32 or 64 bytes depending on + * register D31:F0:ADh bits 5:4. + * + * But this gets us at least _part_ of it. + */ + size = 16; + } else { + size = 128; + } + base &= ~(size-1); + + /* Just print it out for now. We should reserve it after more debugging */ + dev_info(&dev->dev, "%s PIO at %04x-%04x\n", name, base, base+size-1); +} + +static void quirk_ich6_lpc(struct pci_dev *dev) +{ + /* Shared ACPI/GPIO decode with all ICH6+ */ + ich6_lpc_acpi_gpio(dev); + + /* ICH6-specific generic IO decode */ + ich6_lpc_generic_decode(dev, 0x84, "LPC Generic IO decode 1", 0); + ich6_lpc_generic_decode(dev, 0x88, "LPC Generic IO decode 2", 1); +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0, quirk_ich6_lpc); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, quirk_ich6_lpc); + +static void ich7_lpc_generic_decode(struct pci_dev *dev, unsigned reg, const char *name) +{ + u32 val; + u32 mask, base; + + pci_read_config_dword(dev, reg, &val); + + /* Enabled? */ + if (!(val & 1)) + return; + + /* + * IO base in bits 15:2, mask in bits 23:18, both + * are dword-based + */ + base = val & 0xfffc; + mask = (val >> 16) & 0xfc; + mask |= 3; + + /* Just print it out for now. We should reserve it after more debugging */ + dev_info(&dev->dev, "%s PIO at %04x (mask %04x)\n", name, base, mask); +} + +/* ICH7-10 has the same common LPC generic IO decode registers */ +static void quirk_ich7_lpc(struct pci_dev *dev) +{ + /* We share the common ACPI/GPIO decode with ICH6 */ + ich6_lpc_acpi_gpio(dev); + + /* And have 4 ICH7+ generic decodes */ + ich7_lpc_generic_decode(dev, 0x84, "ICH7 LPC Generic IO decode 1"); + ich7_lpc_generic_decode(dev, 0x88, "ICH7 LPC Generic IO decode 2"); + ich7_lpc_generic_decode(dev, 0x8c, "ICH7 LPC Generic IO decode 3"); + ich7_lpc_generic_decode(dev, 0x90, "ICH7 LPC Generic IO decode 4"); +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0, quirk_ich7_lpc); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1, quirk_ich7_lpc); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_31, quirk_ich7_lpc); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_0, quirk_ich7_lpc); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_2, quirk_ich7_lpc); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_3, quirk_ich7_lpc); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_1, quirk_ich7_lpc); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_4, quirk_ich7_lpc); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_2, quirk_ich7_lpc); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_4, quirk_ich7_lpc); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_7, quirk_ich7_lpc); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_8, quirk_ich7_lpc); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_1, quirk_ich7_lpc); + +/* + * VIA ACPI: One IO region pointed to by longword at + * 0x48 or 0x20 (256 bytes of ACPI registers) + */ +static void quirk_vt82c586_acpi(struct pci_dev *dev) +{ + if (dev->revision & 0x10) + quirk_io_region(dev, 0x48, 256, PCI_BRIDGE_RESOURCES, + "vt82c586 ACPI"); +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_vt82c586_acpi); + +/* + * VIA VT82C686 ACPI: Three IO region pointed to by (long)words at + * 0x48 (256 bytes of ACPI registers) + * 0x70 (128 bytes of hardware monitoring register) + * 0x90 (16 bytes of SMB registers) + */ +static void quirk_vt82c686_acpi(struct pci_dev *dev) +{ + quirk_vt82c586_acpi(dev); + + quirk_io_region(dev, 0x70, 128, PCI_BRIDGE_RESOURCES+1, + "vt82c686 HW-mon"); + + quirk_io_region(dev, 0x90, 16, PCI_BRIDGE_RESOURCES+2, "vt82c686 SMB"); +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_vt82c686_acpi); + +/* + * VIA VT8235 ISA Bridge: Two IO regions pointed to by words at + * 0x88 (128 bytes of power management registers) + * 0xd0 (16 bytes of SMB registers) + */ +static void quirk_vt8235_acpi(struct pci_dev *dev) +{ + quirk_io_region(dev, 0x88, 128, PCI_BRIDGE_RESOURCES, "vt8235 PM"); + quirk_io_region(dev, 0xd0, 16, PCI_BRIDGE_RESOURCES+1, "vt8235 SMB"); +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_vt8235_acpi); + +/* + * TI XIO2000a PCIe-PCI Bridge erroneously reports it supports fast back-to-back: + * Disable fast back-to-back on the secondary bus segment + */ +static void quirk_xio2000a(struct pci_dev *dev) +{ + struct pci_dev *pdev; + u16 command; + + dev_warn(&dev->dev, "TI XIO2000a quirk detected; secondary bus fast back-to-back transfers disabled\n"); + list_for_each_entry(pdev, &dev->subordinate->devices, bus_list) { + pci_read_config_word(pdev, PCI_COMMAND, &command); + if (command & PCI_COMMAND_FAST_BACK) + pci_write_config_word(pdev, PCI_COMMAND, command & ~PCI_COMMAND_FAST_BACK); + } +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_XIO2000A, + quirk_xio2000a); + +#ifdef CONFIG_X86_IO_APIC + +#include <asm/io_apic.h> + +/* + * VIA 686A/B: If an IO-APIC is active, we need to route all on-chip + * devices to the external APIC. + * + * TODO: When we have device-specific interrupt routers, + * this code will go away from quirks. + */ +static void quirk_via_ioapic(struct pci_dev *dev) +{ + u8 tmp; + + if (nr_ioapics < 1) + tmp = 0; /* nothing routed to external APIC */ + else + tmp = 0x1f; /* all known bits (4-0) routed to external APIC */ + + dev_info(&dev->dev, "%sbling VIA external APIC routing\n", + tmp == 0 ? "Disa" : "Ena"); + + /* Offset 0x58: External APIC IRQ output control */ + pci_write_config_byte(dev, 0x58, tmp); +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_ioapic); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_ioapic); + +/* + * VIA 8237: Some BIOSes don't set the 'Bypass APIC De-Assert Message' Bit. + * This leads to doubled level interrupt rates. + * Set this bit to get rid of cycle wastage. + * Otherwise uncritical. + */ +static void quirk_via_vt8237_bypass_apic_deassert(struct pci_dev *dev) +{ + u8 misc_control2; +#define BYPASS_APIC_DEASSERT 8 + + pci_read_config_byte(dev, 0x5B, &misc_control2); + if (!(misc_control2 & BYPASS_APIC_DEASSERT)) { + dev_info(&dev->dev, "Bypassing VIA 8237 APIC De-Assert Message\n"); + pci_write_config_byte(dev, 0x5B, misc_control2|BYPASS_APIC_DEASSERT); + } +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_vt8237_bypass_apic_deassert); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_vt8237_bypass_apic_deassert); + +/* + * The AMD io apic can hang the box when an apic irq is masked. + * We check all revs >= B0 (yet not in the pre production!) as the bug + * is currently marked NoFix + * + * We have multiple reports of hangs with this chipset that went away with + * noapic specified. For the moment we assume it's the erratum. We may be wrong + * of course. However the advice is demonstrably good even if so.. + */ +static void quirk_amd_ioapic(struct pci_dev *dev) +{ + if (dev->revision >= 0x02) { + dev_warn(&dev->dev, "I/O APIC: AMD Erratum #22 may be present. In the event of instability try\n"); + dev_warn(&dev->dev, " : booting with the \"noapic\" option\n"); + } +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7410, quirk_amd_ioapic); + +static void quirk_ioapic_rmw(struct pci_dev *dev) +{ + if (dev->devfn == 0 && dev->bus->number == 0) + sis_apic_bug = 1; +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_ANY_ID, quirk_ioapic_rmw); +#endif /* CONFIG_X86_IO_APIC */ + +/* + * Some settings of MMRBC can lead to data corruption so block changes. + * See AMD 8131 HyperTransport PCI-X Tunnel Revision Guide + */ +static void quirk_amd_8131_mmrbc(struct pci_dev *dev) +{ + if (dev->subordinate && dev->revision <= 0x12) { + dev_info(&dev->dev, "AMD8131 rev %x detected; disabling PCI-X MMRBC\n", + dev->revision); + dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MMRBC; + } +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_amd_8131_mmrbc); + +/* + * FIXME: it is questionable that quirk_via_acpi + * is needed. It shows up as an ISA bridge, and does not + * support the PCI_INTERRUPT_LINE register at all. Therefore + * it seems like setting the pci_dev's 'irq' to the + * value of the ACPI SCI interrupt is only done for convenience. + * -jgarzik + */ +static void quirk_via_acpi(struct pci_dev *d) +{ + /* + * VIA ACPI device: SCI IRQ line in PCI config byte 0x42 + */ + u8 irq; + pci_read_config_byte(d, 0x42, &irq); + irq &= 0xf; + if (irq && (irq != 2)) + d->irq = irq; +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_via_acpi); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_via_acpi); + + +/* + * VIA bridges which have VLink + */ + +static int via_vlink_dev_lo = -1, via_vlink_dev_hi = 18; + +static void quirk_via_bridge(struct pci_dev *dev) +{ + /* See what bridge we have and find the device ranges */ + switch (dev->device) { + case PCI_DEVICE_ID_VIA_82C686: + /* The VT82C686 is special, it attaches to PCI and can have + any device number. All its subdevices are functions of + that single device. */ + via_vlink_dev_lo = PCI_SLOT(dev->devfn); + via_vlink_dev_hi = PCI_SLOT(dev->devfn); + break; + case PCI_DEVICE_ID_VIA_8237: + case PCI_DEVICE_ID_VIA_8237A: + via_vlink_dev_lo = 15; + break; + case PCI_DEVICE_ID_VIA_8235: + via_vlink_dev_lo = 16; + break; + case PCI_DEVICE_ID_VIA_8231: + case PCI_DEVICE_ID_VIA_8233_0: + case PCI_DEVICE_ID_VIA_8233A: + case PCI_DEVICE_ID_VIA_8233C_0: + via_vlink_dev_lo = 17; + break; + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_bridge); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, quirk_via_bridge); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233_0, quirk_via_bridge); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233A, quirk_via_bridge); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233C_0, quirk_via_bridge); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_via_bridge); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_bridge); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237A, quirk_via_bridge); + +/** + * quirk_via_vlink - VIA VLink IRQ number update + * @dev: PCI device + * + * If the device we are dealing with is on a PIC IRQ we need to + * ensure that the IRQ line register which usually is not relevant + * for PCI cards, is actually written so that interrupts get sent + * to the right place. + * We only do this on systems where a VIA south bridge was detected, + * and only for VIA devices on the motherboard (see quirk_via_bridge + * above). + */ + +static void quirk_via_vlink(struct pci_dev *dev) +{ + u8 irq, new_irq; + + /* Check if we have VLink at all */ + if (via_vlink_dev_lo == -1) + return; + + new_irq = dev->irq; + + /* Don't quirk interrupts outside the legacy IRQ range */ + if (!new_irq || new_irq > 15) + return; + + /* Internal device ? */ + if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) > via_vlink_dev_hi || + PCI_SLOT(dev->devfn) < via_vlink_dev_lo) + return; + + /* This is an internal VLink device on a PIC interrupt. The BIOS + ought to have set this but may not have, so we redo it */ + + pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq); + if (new_irq != irq) { + dev_info(&dev->dev, "VIA VLink IRQ fixup, from %d to %d\n", + irq, new_irq); + udelay(15); /* unknown if delay really needed */ + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq); + } +} +DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_vlink); + +/* + * VIA VT82C598 has its device ID settable and many BIOSes + * set it to the ID of VT82C597 for backward compatibility. + * We need to switch it off to be able to recognize the real + * type of the chip. + */ +static void quirk_vt82c598_id(struct pci_dev *dev) +{ + pci_write_config_byte(dev, 0xfc, 0); + pci_read_config_word(dev, PCI_DEVICE_ID, &dev->device); +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C597_0, quirk_vt82c598_id); + +/* + * CardBus controllers have a legacy base address that enables them + * to respond as i82365 pcmcia controllers. We don't want them to + * do this even if the Linux CardBus driver is not loaded, because + * the Linux i82365 driver does not (and should not) handle CardBus. + */ +static void quirk_cardbus_legacy(struct pci_dev *dev) +{ + pci_write_config_dword(dev, PCI_CB_LEGACY_MODE_BASE, 0); +} +DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_BRIDGE_CARDBUS, 8, quirk_cardbus_legacy); +DECLARE_PCI_FIXUP_CLASS_RESUME_EARLY(PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_BRIDGE_CARDBUS, 8, quirk_cardbus_legacy); + +/* + * Following the PCI ordering rules is optional on the AMD762. I'm not + * sure what the designers were smoking but let's not inhale... + * + * To be fair to AMD, it follows the spec by default, its BIOS people + * who turn it off! + */ +static void quirk_amd_ordering(struct pci_dev *dev) +{ + u32 pcic; + pci_read_config_dword(dev, 0x4C, &pcic); + if ((pcic & 6) != 6) { + pcic |= 6; + dev_warn(&dev->dev, "BIOS failed to enable PCI standards compliance; fixing this error\n"); + pci_write_config_dword(dev, 0x4C, pcic); + pci_read_config_dword(dev, 0x84, &pcic); + pcic |= (1 << 23); /* Required in this mode */ + pci_write_config_dword(dev, 0x84, pcic); + } +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_FE_GATE_700C, quirk_amd_ordering); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_FE_GATE_700C, quirk_amd_ordering); + +/* + * DreamWorks provided workaround for Dunord I-3000 problem + * + * This card decodes and responds to addresses not apparently + * assigned to it. We force a larger allocation to ensure that + * nothing gets put too close to it. + */ +static void quirk_dunord(struct pci_dev *dev) +{ + struct resource *r = &dev->resource[1]; + + r->flags |= IORESOURCE_UNSET; + r->start = 0; + r->end = 0xffffff; +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_DUNORD, PCI_DEVICE_ID_DUNORD_I3000, quirk_dunord); + +/* + * i82380FB mobile docking controller: its PCI-to-PCI bridge + * is subtractive decoding (transparent), and does indicate this + * in the ProgIf. Unfortunately, the ProgIf value is wrong - 0x80 + * instead of 0x01. + */ +static void quirk_transparent_bridge(struct pci_dev *dev) +{ + dev->transparent = 1; +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82380FB, quirk_transparent_bridge); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA, 0x605, quirk_transparent_bridge); + +/* + * Common misconfiguration of the MediaGX/Geode PCI master that will + * reduce PCI bandwidth from 70MB/s to 25MB/s. See the GXM/GXLV/GX1 + * datasheets found at http://www.national.com/analog for info on what + * these bits do. <christer@weinigel.se> + */ +static void quirk_mediagx_master(struct pci_dev *dev) +{ + u8 reg; + + pci_read_config_byte(dev, 0x41, ®); + if (reg & 2) { + reg &= ~2; + dev_info(&dev->dev, "Fixup for MediaGX/Geode Slave Disconnect Boundary (0x41=0x%02x)\n", + reg); + pci_write_config_byte(dev, 0x41, reg); + } +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_PCI_MASTER, quirk_mediagx_master); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_PCI_MASTER, quirk_mediagx_master); + +/* + * Ensure C0 rev restreaming is off. This is normally done by + * the BIOS but in the odd case it is not the results are corruption + * hence the presence of a Linux check + */ +static void quirk_disable_pxb(struct pci_dev *pdev) +{ + u16 config; + + if (pdev->revision != 0x04) /* Only C0 requires this */ + return; + pci_read_config_word(pdev, 0x40, &config); + if (config & (1<<6)) { + config &= ~(1<<6); + pci_write_config_word(pdev, 0x40, config); + dev_info(&pdev->dev, "C0 revision 450NX. Disabling PCI restreaming\n"); + } +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, quirk_disable_pxb); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, quirk_disable_pxb); + +static void quirk_amd_ide_mode(struct pci_dev *pdev) +{ + /* set SBX00/Hudson-2 SATA in IDE mode to AHCI mode */ + u8 tmp; + + pci_read_config_byte(pdev, PCI_CLASS_DEVICE, &tmp); + if (tmp == 0x01) { + pci_read_config_byte(pdev, 0x40, &tmp); + pci_write_config_byte(pdev, 0x40, tmp|1); + pci_write_config_byte(pdev, 0x9, 1); + pci_write_config_byte(pdev, 0xa, 6); + pci_write_config_byte(pdev, 0x40, tmp); + + pdev->class = PCI_CLASS_STORAGE_SATA_AHCI; + dev_info(&pdev->dev, "set SATA to AHCI mode\n"); + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, quirk_amd_ide_mode); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, quirk_amd_ide_mode); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE, quirk_amd_ide_mode); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE, quirk_amd_ide_mode); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x7900, quirk_amd_ide_mode); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, 0x7900, quirk_amd_ide_mode); + +/* + * Serverworks CSB5 IDE does not fully support native mode + */ +static void quirk_svwks_csb5ide(struct pci_dev *pdev) +{ + u8 prog; + pci_read_config_byte(pdev, PCI_CLASS_PROG, &prog); + if (prog & 5) { + prog &= ~5; + pdev->class &= ~5; + pci_write_config_byte(pdev, PCI_CLASS_PROG, prog); + /* PCI layer will sort out resources */ + } +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, quirk_svwks_csb5ide); + +/* + * Intel 82801CAM ICH3-M datasheet says IDE modes must be the same + */ +static void quirk_ide_samemode(struct pci_dev *pdev) +{ + u8 prog; + + pci_read_config_byte(pdev, PCI_CLASS_PROG, &prog); + + if (((prog & 1) && !(prog & 4)) || ((prog & 4) && !(prog & 1))) { + dev_info(&pdev->dev, "IDE mode mismatch; forcing legacy mode\n"); + prog &= ~5; + pdev->class &= ~5; + pci_write_config_byte(pdev, PCI_CLASS_PROG, prog); + } +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_10, quirk_ide_samemode); + +/* + * Some ATA devices break if put into D3 + */ + +static void quirk_no_ata_d3(struct pci_dev *pdev) +{ + pdev->dev_flags |= PCI_DEV_FLAGS_NO_D3; +} +/* Quirk the legacy ATA devices only. The AHCI ones are ok */ +DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_ANY_ID, + PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3); +DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_ATI, PCI_ANY_ID, + PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3); +/* ALi loses some register settings that we cannot then restore */ +DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_AL, PCI_ANY_ID, + PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3); +/* VIA comes back fine but we need to keep it alive or ACPI GTM failures + occur when mode detecting */ +DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_VIA, PCI_ANY_ID, + PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3); + +/* This was originally an Alpha specific thing, but it really fits here. + * The i82375 PCI/EISA bridge appears as non-classified. Fix that. + */ +static void quirk_eisa_bridge(struct pci_dev *dev) +{ + dev->class = PCI_CLASS_BRIDGE_EISA << 8; +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82375, quirk_eisa_bridge); + + +/* + * On ASUS P4B boards, the SMBus PCI Device within the ICH2/4 southbridge + * is not activated. The myth is that Asus said that they do not want the + * users to be irritated by just another PCI Device in the Win98 device + * manager. (see the file prog/hotplug/README.p4b in the lm_sensors + * package 2.7.0 for details) + * + * The SMBus PCI Device can be activated by setting a bit in the ICH LPC + * bridge. Unfortunately, this device has no subvendor/subdevice ID. So it + * becomes necessary to do this tweak in two steps -- the chosen trigger + * is either the Host bridge (preferred) or on-board VGA controller. + * + * Note that we used to unhide the SMBus that way on Toshiba laptops + * (Satellite A40 and Tecra M2) but then found that the thermal management + * was done by SMM code, which could cause unsynchronized concurrent + * accesses to the SMBus registers, with potentially bad effects. Thus you + * should be very careful when adding new entries: if SMM is accessing the + * Intel SMBus, this is a very good reason to leave it hidden. + * + * Likewise, many recent laptops use ACPI for thermal management. If the + * ACPI DSDT code accesses the SMBus, then Linux should not access it + * natively, and keeping the SMBus hidden is the right thing to do. If you + * are about to add an entry in the table below, please first disassemble + * the DSDT and double-check that there is no code accessing the SMBus. + */ +static int asus_hides_smbus; + +static void asus_hides_smbus_hostbridge(struct pci_dev *dev) +{ + if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK)) { + if (dev->device == PCI_DEVICE_ID_INTEL_82845_HB) + switch (dev->subsystem_device) { + case 0x8025: /* P4B-LX */ + case 0x8070: /* P4B */ + case 0x8088: /* P4B533 */ + case 0x1626: /* L3C notebook */ + asus_hides_smbus = 1; + } + else if (dev->device == PCI_DEVICE_ID_INTEL_82845G_HB) + switch (dev->subsystem_device) { + case 0x80b1: /* P4GE-V */ + case 0x80b2: /* P4PE */ + case 0x8093: /* P4B533-V */ + asus_hides_smbus = 1; + } + else if (dev->device == PCI_DEVICE_ID_INTEL_82850_HB) + switch (dev->subsystem_device) { + case 0x8030: /* P4T533 */ + asus_hides_smbus = 1; + } + else if (dev->device == PCI_DEVICE_ID_INTEL_7205_0) + switch (dev->subsystem_device) { + case 0x8070: /* P4G8X Deluxe */ + asus_hides_smbus = 1; + } + else if (dev->device == PCI_DEVICE_ID_INTEL_E7501_MCH) + switch (dev->subsystem_device) { + case 0x80c9: /* PU-DLS */ + asus_hides_smbus = 1; + } + else if (dev->device == PCI_DEVICE_ID_INTEL_82855GM_HB) + switch (dev->subsystem_device) { + case 0x1751: /* M2N notebook */ + case 0x1821: /* M5N notebook */ + case 0x1897: /* A6L notebook */ + asus_hides_smbus = 1; + } + else if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) + switch (dev->subsystem_device) { + case 0x184b: /* W1N notebook */ + case 0x186a: /* M6Ne notebook */ + asus_hides_smbus = 1; + } + else if (dev->device == PCI_DEVICE_ID_INTEL_82865_HB) + switch (dev->subsystem_device) { + case 0x80f2: /* P4P800-X */ + asus_hides_smbus = 1; + } + else if (dev->device == PCI_DEVICE_ID_INTEL_82915GM_HB) + switch (dev->subsystem_device) { + case 0x1882: /* M6V notebook */ + case 0x1977: /* A6VA notebook */ + asus_hides_smbus = 1; + } + } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_HP)) { + if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) + switch (dev->subsystem_device) { + case 0x088C: /* HP Compaq nc8000 */ + case 0x0890: /* HP Compaq nc6000 */ + asus_hides_smbus = 1; + } + else if (dev->device == PCI_DEVICE_ID_INTEL_82865_HB) + switch (dev->subsystem_device) { + case 0x12bc: /* HP D330L */ + case 0x12bd: /* HP D530 */ + case 0x006a: /* HP Compaq nx9500 */ + asus_hides_smbus = 1; + } + else if (dev->device == PCI_DEVICE_ID_INTEL_82875_HB) + switch (dev->subsystem_device) { + case 0x12bf: /* HP xw4100 */ + asus_hides_smbus = 1; + } + } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG)) { + if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) + switch (dev->subsystem_device) { + case 0xC00C: /* Samsung P35 notebook */ + asus_hides_smbus = 1; + } + } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ)) { + if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) + switch (dev->subsystem_device) { + case 0x0058: /* Compaq Evo N620c */ + asus_hides_smbus = 1; + } + else if (dev->device == PCI_DEVICE_ID_INTEL_82810_IG3) + switch (dev->subsystem_device) { + case 0xB16C: /* Compaq Deskpro EP 401963-001 (PCA# 010174) */ + /* Motherboard doesn't have Host bridge + * subvendor/subdevice IDs, therefore checking + * its on-board VGA controller */ + asus_hides_smbus = 1; + } + else if (dev->device == PCI_DEVICE_ID_INTEL_82801DB_2) + switch (dev->subsystem_device) { + case 0x00b8: /* Compaq Evo D510 CMT */ + case 0x00b9: /* Compaq Evo D510 SFF */ + case 0x00ba: /* Compaq Evo D510 USDT */ + /* Motherboard doesn't have Host bridge + * subvendor/subdevice IDs and on-board VGA + * controller is disabled if an AGP card is + * inserted, therefore checking USB UHCI + * Controller #1 */ + asus_hides_smbus = 1; + } + else if (dev->device == PCI_DEVICE_ID_INTEL_82815_CGC) + switch (dev->subsystem_device) { + case 0x001A: /* Compaq Deskpro EN SSF P667 815E */ + /* Motherboard doesn't have host bridge + * subvendor/subdevice IDs, therefore checking + * its on-board VGA controller */ + asus_hides_smbus = 1; + } + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82845_HB, asus_hides_smbus_hostbridge); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82845G_HB, asus_hides_smbus_hostbridge); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82850_HB, asus_hides_smbus_hostbridge); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82865_HB, asus_hides_smbus_hostbridge); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82875_HB, asus_hides_smbus_hostbridge); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_7205_0, asus_hides_smbus_hostbridge); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7501_MCH, asus_hides_smbus_hostbridge); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82855PM_HB, asus_hides_smbus_hostbridge); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82855GM_HB, asus_hides_smbus_hostbridge); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82915GM_HB, asus_hides_smbus_hostbridge); + +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82810_IG3, asus_hides_smbus_hostbridge); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_2, asus_hides_smbus_hostbridge); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82815_CGC, asus_hides_smbus_hostbridge); + +static void asus_hides_smbus_lpc(struct pci_dev *dev) +{ + u16 val; + + if (likely(!asus_hides_smbus)) + return; + + pci_read_config_word(dev, 0xF2, &val); + if (val & 0x8) { + pci_write_config_word(dev, 0xF2, val & (~0x8)); + pci_read_config_word(dev, 0xF2, &val); + if (val & 0x8) + dev_info(&dev->dev, "i801 SMBus device continues to play 'hide and seek'! 0x%x\n", + val); + else + dev_info(&dev->dev, "Enabled i801 SMBus device\n"); + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, asus_hides_smbus_lpc); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, asus_hides_smbus_lpc); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, asus_hides_smbus_lpc); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, asus_hides_smbus_lpc); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, asus_hides_smbus_lpc); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, asus_hides_smbus_lpc); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, asus_hides_smbus_lpc); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, asus_hides_smbus_lpc); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, asus_hides_smbus_lpc); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, asus_hides_smbus_lpc); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, asus_hides_smbus_lpc); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, asus_hides_smbus_lpc); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, asus_hides_smbus_lpc); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, asus_hides_smbus_lpc); + +/* It appears we just have one such device. If not, we have a warning */ +static void __iomem *asus_rcba_base; +static void asus_hides_smbus_lpc_ich6_suspend(struct pci_dev *dev) +{ + u32 rcba; + + if (likely(!asus_hides_smbus)) + return; + WARN_ON(asus_rcba_base); + + pci_read_config_dword(dev, 0xF0, &rcba); + /* use bits 31:14, 16 kB aligned */ + asus_rcba_base = ioremap_nocache(rcba & 0xFFFFC000, 0x4000); + if (asus_rcba_base == NULL) + return; +} + +static void asus_hides_smbus_lpc_ich6_resume_early(struct pci_dev *dev) +{ + u32 val; + + if (likely(!asus_hides_smbus || !asus_rcba_base)) + return; + /* read the Function Disable register, dword mode only */ + val = readl(asus_rcba_base + 0x3418); + writel(val & 0xFFFFFFF7, asus_rcba_base + 0x3418); /* enable the SMBus device */ +} + +static void asus_hides_smbus_lpc_ich6_resume(struct pci_dev *dev) +{ + if (likely(!asus_hides_smbus || !asus_rcba_base)) + return; + iounmap(asus_rcba_base); + asus_rcba_base = NULL; + dev_info(&dev->dev, "Enabled ICH6/i801 SMBus device\n"); +} + +static void asus_hides_smbus_lpc_ich6(struct pci_dev *dev) +{ + asus_hides_smbus_lpc_ich6_suspend(dev); + asus_hides_smbus_lpc_ich6_resume_early(dev); + asus_hides_smbus_lpc_ich6_resume(dev); +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6); +DECLARE_PCI_FIXUP_SUSPEND(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6_suspend); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6_resume); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6_resume_early); + +/* + * SiS 96x south bridge: BIOS typically hides SMBus device... + */ +static void quirk_sis_96x_smbus(struct pci_dev *dev) +{ + u8 val = 0; + pci_read_config_byte(dev, 0x77, &val); + if (val & 0x10) { + dev_info(&dev->dev, "Enabling SiS 96x SMBus\n"); + pci_write_config_byte(dev, 0x77, val & ~0x10); + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_961, quirk_sis_96x_smbus); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_962, quirk_sis_96x_smbus); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_963, quirk_sis_96x_smbus); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC, quirk_sis_96x_smbus); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_961, quirk_sis_96x_smbus); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_962, quirk_sis_96x_smbus); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_963, quirk_sis_96x_smbus); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC, quirk_sis_96x_smbus); + +/* + * ... This is further complicated by the fact that some SiS96x south + * bridges pretend to be 85C503/5513 instead. In that case see if we + * spotted a compatible north bridge to make sure. + * (pci_find_device doesn't work yet) + * + * We can also enable the sis96x bit in the discovery register.. + */ +#define SIS_DETECT_REGISTER 0x40 + +static void quirk_sis_503(struct pci_dev *dev) +{ + u8 reg; + u16 devid; + + pci_read_config_byte(dev, SIS_DETECT_REGISTER, ®); + pci_write_config_byte(dev, SIS_DETECT_REGISTER, reg | (1 << 6)); + pci_read_config_word(dev, PCI_DEVICE_ID, &devid); + if (((devid & 0xfff0) != 0x0960) && (devid != 0x0018)) { + pci_write_config_byte(dev, SIS_DETECT_REGISTER, reg); + return; + } + + /* + * Ok, it now shows up as a 96x.. run the 96x quirk by + * hand in case it has already been processed. + * (depends on link order, which is apparently not guaranteed) + */ + dev->device = devid; + quirk_sis_96x_smbus(dev); +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, quirk_sis_503); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, quirk_sis_503); + + +/* + * On ASUS A8V and A8V Deluxe boards, the onboard AC97 audio controller + * and MC97 modem controller are disabled when a second PCI soundcard is + * present. This patch, tweaking the VT8237 ISA bridge, enables them. + * -- bjd + */ +static void asus_hides_ac97_lpc(struct pci_dev *dev) +{ + u8 val; + int asus_hides_ac97 = 0; + + if (likely(dev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK)) { + if (dev->device == PCI_DEVICE_ID_VIA_8237) + asus_hides_ac97 = 1; + } + + if (!asus_hides_ac97) + return; + + pci_read_config_byte(dev, 0x50, &val); + if (val & 0xc0) { + pci_write_config_byte(dev, 0x50, val & (~0xc0)); + pci_read_config_byte(dev, 0x50, &val); + if (val & 0xc0) + dev_info(&dev->dev, "Onboard AC97/MC97 devices continue to play 'hide and seek'! 0x%x\n", + val); + else + dev_info(&dev->dev, "Enabled onboard AC97/MC97 devices\n"); + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, asus_hides_ac97_lpc); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, asus_hides_ac97_lpc); + +#if defined(CONFIG_ATA) || defined(CONFIG_ATA_MODULE) + +/* + * If we are using libata we can drive this chip properly but must + * do this early on to make the additional device appear during + * the PCI scanning. + */ +static void quirk_jmicron_ata(struct pci_dev *pdev) +{ + u32 conf1, conf5, class; + u8 hdr; + + /* Only poke fn 0 */ + if (PCI_FUNC(pdev->devfn)) + return; + + pci_read_config_dword(pdev, 0x40, &conf1); + pci_read_config_dword(pdev, 0x80, &conf5); + + conf1 &= ~0x00CFF302; /* Clear bit 1, 8, 9, 12-19, 22, 23 */ + conf5 &= ~(1 << 24); /* Clear bit 24 */ + + switch (pdev->device) { + case PCI_DEVICE_ID_JMICRON_JMB360: /* SATA single port */ + case PCI_DEVICE_ID_JMICRON_JMB362: /* SATA dual ports */ + case PCI_DEVICE_ID_JMICRON_JMB364: /* SATA dual ports */ + /* The controller should be in single function ahci mode */ + conf1 |= 0x0002A100; /* Set 8, 13, 15, 17 */ + break; + + case PCI_DEVICE_ID_JMICRON_JMB365: + case PCI_DEVICE_ID_JMICRON_JMB366: + /* Redirect IDE second PATA port to the right spot */ + conf5 |= (1 << 24); + /* Fall through */ + case PCI_DEVICE_ID_JMICRON_JMB361: + case PCI_DEVICE_ID_JMICRON_JMB363: + case PCI_DEVICE_ID_JMICRON_JMB369: + /* Enable dual function mode, AHCI on fn 0, IDE fn1 */ + /* Set the class codes correctly and then direct IDE 0 */ + conf1 |= 0x00C2A1B3; /* Set 0, 1, 4, 5, 7, 8, 13, 15, 17, 22, 23 */ + break; + + case PCI_DEVICE_ID_JMICRON_JMB368: + /* The controller should be in single function IDE mode */ + conf1 |= 0x00C00000; /* Set 22, 23 */ + break; + } + + pci_write_config_dword(pdev, 0x40, conf1); + pci_write_config_dword(pdev, 0x80, conf5); + + /* Update pdev accordingly */ + pci_read_config_byte(pdev, PCI_HEADER_TYPE, &hdr); + pdev->hdr_type = hdr & 0x7f; + pdev->multifunction = !!(hdr & 0x80); + + pci_read_config_dword(pdev, PCI_CLASS_REVISION, &class); + pdev->class = class >> 8; +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, quirk_jmicron_ata); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB362, quirk_jmicron_ata); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB364, quirk_jmicron_ata); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, quirk_jmicron_ata); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB369, quirk_jmicron_ata); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, quirk_jmicron_ata); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB362, quirk_jmicron_ata); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB364, quirk_jmicron_ata); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, quirk_jmicron_ata); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB369, quirk_jmicron_ata); + +#endif + +#ifdef CONFIG_X86_IO_APIC +static void quirk_alder_ioapic(struct pci_dev *pdev) +{ + int i; + + if ((pdev->class >> 8) != 0xff00) + return; + + /* the first BAR is the location of the IO APIC...we must + * not touch this (and it's already covered by the fixmap), so + * forcibly insert it into the resource tree */ + if (pci_resource_start(pdev, 0) && pci_resource_len(pdev, 0)) + insert_resource(&iomem_resource, &pdev->resource[0]); + + /* The next five BARs all seem to be rubbish, so just clean + * them out */ + for (i = 1; i < 6; i++) + memset(&pdev->resource[i], 0, sizeof(pdev->resource[i])); +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EESSC, quirk_alder_ioapic); +#endif + +static void quirk_pcie_mch(struct pci_dev *pdev) +{ + pci_msi_off(pdev); + pdev->no_msi = 1; +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH, quirk_pcie_mch); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7320_MCH, quirk_pcie_mch); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7525_MCH, quirk_pcie_mch); + + +/* + * It's possible for the MSI to get corrupted if shpc and acpi + * are used together on certain PXH-based systems. + */ +static void quirk_pcie_pxh(struct pci_dev *dev) +{ + pci_msi_off(dev); + dev->no_msi = 1; + dev_warn(&dev->dev, "PXH quirk detected; SHPC device MSI disabled\n"); +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHD_0, quirk_pcie_pxh); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHD_1, quirk_pcie_pxh); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_pcie_pxh); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_pcie_pxh); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_pcie_pxh); + +/* + * Some Intel PCI Express chipsets have trouble with downstream + * device power management. + */ +static void quirk_intel_pcie_pm(struct pci_dev *dev) +{ + pci_pm_d3_delay = 120; + dev->no_d1d2 = 1; +} + +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e2, quirk_intel_pcie_pm); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e3, quirk_intel_pcie_pm); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e4, quirk_intel_pcie_pm); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e5, quirk_intel_pcie_pm); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e6, quirk_intel_pcie_pm); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e7, quirk_intel_pcie_pm); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25f7, quirk_intel_pcie_pm); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25f8, quirk_intel_pcie_pm); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25f9, quirk_intel_pcie_pm); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25fa, quirk_intel_pcie_pm); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2601, quirk_intel_pcie_pm); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2602, quirk_intel_pcie_pm); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2603, quirk_intel_pcie_pm); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2604, quirk_intel_pcie_pm); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2605, quirk_intel_pcie_pm); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2606, quirk_intel_pcie_pm); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2607, quirk_intel_pcie_pm); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2608, quirk_intel_pcie_pm); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2609, quirk_intel_pcie_pm); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260a, quirk_intel_pcie_pm); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260b, quirk_intel_pcie_pm); + +#ifdef CONFIG_X86_IO_APIC +/* + * Boot interrupts on some chipsets cannot be turned off. For these chipsets, + * remap the original interrupt in the linux kernel to the boot interrupt, so + * that a PCI device's interrupt handler is installed on the boot interrupt + * line instead. + */ +static void quirk_reroute_to_boot_interrupts_intel(struct pci_dev *dev) +{ + if (noioapicquirk || noioapicreroute) + return; + + dev->irq_reroute_variant = INTEL_IRQ_REROUTE_VARIANT; + dev_info(&dev->dev, "rerouting interrupts for [%04x:%04x]\n", + dev->vendor, dev->device); +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_0, quirk_reroute_to_boot_interrupts_intel); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_1, quirk_reroute_to_boot_interrupts_intel); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0, quirk_reroute_to_boot_interrupts_intel); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_reroute_to_boot_interrupts_intel); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_reroute_to_boot_interrupts_intel); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_reroute_to_boot_interrupts_intel); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_0, quirk_reroute_to_boot_interrupts_intel); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_1, quirk_reroute_to_boot_interrupts_intel); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_0, quirk_reroute_to_boot_interrupts_intel); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_1, quirk_reroute_to_boot_interrupts_intel); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0, quirk_reroute_to_boot_interrupts_intel); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_reroute_to_boot_interrupts_intel); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_reroute_to_boot_interrupts_intel); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_reroute_to_boot_interrupts_intel); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_0, quirk_reroute_to_boot_interrupts_intel); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_1, quirk_reroute_to_boot_interrupts_intel); + +/* + * On some chipsets we can disable the generation of legacy INTx boot + * interrupts. + */ + +/* + * IO-APIC1 on 6300ESB generates boot interrupts, see intel order no + * 300641-004US, section 5.7.3. + */ +#define INTEL_6300_IOAPIC_ABAR 0x40 +#define INTEL_6300_DISABLE_BOOT_IRQ (1<<14) + +static void quirk_disable_intel_boot_interrupt(struct pci_dev *dev) +{ + u16 pci_config_word; + + if (noioapicquirk) + return; + + pci_read_config_word(dev, INTEL_6300_IOAPIC_ABAR, &pci_config_word); + pci_config_word |= INTEL_6300_DISABLE_BOOT_IRQ; + pci_write_config_word(dev, INTEL_6300_IOAPIC_ABAR, pci_config_word); + + dev_info(&dev->dev, "disabled boot interrupts on device [%04x:%04x]\n", + dev->vendor, dev->device); +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_10, quirk_disable_intel_boot_interrupt); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_10, quirk_disable_intel_boot_interrupt); + +/* + * disable boot interrupts on HT-1000 + */ +#define BC_HT1000_FEATURE_REG 0x64 +#define BC_HT1000_PIC_REGS_ENABLE (1<<0) +#define BC_HT1000_MAP_IDX 0xC00 +#define BC_HT1000_MAP_DATA 0xC01 + +static void quirk_disable_broadcom_boot_interrupt(struct pci_dev *dev) +{ + u32 pci_config_dword; + u8 irq; + + if (noioapicquirk) + return; + + pci_read_config_dword(dev, BC_HT1000_FEATURE_REG, &pci_config_dword); + pci_write_config_dword(dev, BC_HT1000_FEATURE_REG, pci_config_dword | + BC_HT1000_PIC_REGS_ENABLE); + + for (irq = 0x10; irq < 0x10 + 32; irq++) { + outb(irq, BC_HT1000_MAP_IDX); + outb(0x00, BC_HT1000_MAP_DATA); + } + + pci_write_config_dword(dev, BC_HT1000_FEATURE_REG, pci_config_dword); + + dev_info(&dev->dev, "disabled boot interrupts on device [%04x:%04x]\n", + dev->vendor, dev->device); +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000SB, quirk_disable_broadcom_boot_interrupt); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000SB, quirk_disable_broadcom_boot_interrupt); + +/* + * disable boot interrupts on AMD and ATI chipsets + */ +/* + * NOIOAMODE needs to be disabled to disable "boot interrupts". For AMD 8131 + * rev. A0 and B0, NOIOAMODE needs to be disabled anyway to fix IO-APIC mode + * (due to an erratum). + */ +#define AMD_813X_MISC 0x40 +#define AMD_813X_NOIOAMODE (1<<0) +#define AMD_813X_REV_B1 0x12 +#define AMD_813X_REV_B2 0x13 + +static void quirk_disable_amd_813x_boot_interrupt(struct pci_dev *dev) +{ + u32 pci_config_dword; + + if (noioapicquirk) + return; + if ((dev->revision == AMD_813X_REV_B1) || + (dev->revision == AMD_813X_REV_B2)) + return; + + pci_read_config_dword(dev, AMD_813X_MISC, &pci_config_dword); + pci_config_dword &= ~AMD_813X_NOIOAMODE; + pci_write_config_dword(dev, AMD_813X_MISC, pci_config_dword); + + dev_info(&dev->dev, "disabled boot interrupts on device [%04x:%04x]\n", + dev->vendor, dev->device); +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_amd_813x_boot_interrupt); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_amd_813x_boot_interrupt); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE, quirk_disable_amd_813x_boot_interrupt); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE, quirk_disable_amd_813x_boot_interrupt); + +#define AMD_8111_PCI_IRQ_ROUTING 0x56 + +static void quirk_disable_amd_8111_boot_interrupt(struct pci_dev *dev) +{ + u16 pci_config_word; + + if (noioapicquirk) + return; + + pci_read_config_word(dev, AMD_8111_PCI_IRQ_ROUTING, &pci_config_word); + if (!pci_config_word) { + dev_info(&dev->dev, "boot interrupts on device [%04x:%04x] already disabled\n", + dev->vendor, dev->device); + return; + } + pci_write_config_word(dev, AMD_8111_PCI_IRQ_ROUTING, 0); + dev_info(&dev->dev, "disabled boot interrupts on device [%04x:%04x]\n", + dev->vendor, dev->device); +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS, quirk_disable_amd_8111_boot_interrupt); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS, quirk_disable_amd_8111_boot_interrupt); +#endif /* CONFIG_X86_IO_APIC */ + +/* + * Toshiba TC86C001 IDE controller reports the standard 8-byte BAR0 size + * but the PIO transfers won't work if BAR0 falls at the odd 8 bytes. + * Re-allocate the region if needed... + */ +static void quirk_tc86c001_ide(struct pci_dev *dev) +{ + struct resource *r = &dev->resource[0]; + + if (r->start & 0x8) { + r->flags |= IORESOURCE_UNSET; + r->start = 0; + r->end = 0xf; + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA_2, + PCI_DEVICE_ID_TOSHIBA_TC86C001_IDE, + quirk_tc86c001_ide); + +/* + * PLX PCI 9050 PCI Target bridge controller has an errata that prevents the + * local configuration registers accessible via BAR0 (memory) or BAR1 (i/o) + * being read correctly if bit 7 of the base address is set. + * The BAR0 or BAR1 region may be disabled (size 0) or enabled (size 128). + * Re-allocate the regions to a 256-byte boundary if necessary. + */ +static void quirk_plx_pci9050(struct pci_dev *dev) +{ + unsigned int bar; + + /* Fixed in revision 2 (PCI 9052). */ + if (dev->revision >= 2) + return; + for (bar = 0; bar <= 1; bar++) + if (pci_resource_len(dev, bar) == 0x80 && + (pci_resource_start(dev, bar) & 0x80)) { + struct resource *r = &dev->resource[bar]; + dev_info(&dev->dev, "Re-allocating PLX PCI 9050 BAR %u to length 256 to avoid bit 7 bug\n", + bar); + r->flags |= IORESOURCE_UNSET; + r->start = 0; + r->end = 0xff; + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + quirk_plx_pci9050); +/* + * The following Meilhaus (vendor ID 0x1402) device IDs (amongst others) + * may be using the PLX PCI 9050: 0x0630, 0x0940, 0x0950, 0x0960, 0x100b, + * 0x1400, 0x140a, 0x140b, 0x14e0, 0x14ea, 0x14eb, 0x1604, 0x1608, 0x160c, + * 0x168f, 0x2000, 0x2600, 0x3000, 0x810a, 0x810b. + * + * Currently, device IDs 0x2000 and 0x2600 are used by the Comedi "me_daq" + * driver. + */ +DECLARE_PCI_FIXUP_HEADER(0x1402, 0x2000, quirk_plx_pci9050); +DECLARE_PCI_FIXUP_HEADER(0x1402, 0x2600, quirk_plx_pci9050); + +static void quirk_netmos(struct pci_dev *dev) +{ + unsigned int num_parallel = (dev->subsystem_device & 0xf0) >> 4; + unsigned int num_serial = dev->subsystem_device & 0xf; + + /* + * These Netmos parts are multiport serial devices with optional + * parallel ports. Even when parallel ports are present, they + * are identified as class SERIAL, which means the serial driver + * will claim them. To prevent this, mark them as class OTHER. + * These combo devices should be claimed by parport_serial. + * + * The subdevice ID is of the form 0x00PS, where <P> is the number + * of parallel ports and <S> is the number of serial ports. + */ + switch (dev->device) { + case PCI_DEVICE_ID_NETMOS_9835: + /* Well, this rule doesn't hold for the following 9835 device */ + if (dev->subsystem_vendor == PCI_VENDOR_ID_IBM && + dev->subsystem_device == 0x0299) + return; + case PCI_DEVICE_ID_NETMOS_9735: + case PCI_DEVICE_ID_NETMOS_9745: + case PCI_DEVICE_ID_NETMOS_9845: + case PCI_DEVICE_ID_NETMOS_9855: + if (num_parallel) { + dev_info(&dev->dev, "Netmos %04x (%u parallel, %u serial); changing class SERIAL to OTHER (use parport_serial)\n", + dev->device, num_parallel, num_serial); + dev->class = (PCI_CLASS_COMMUNICATION_OTHER << 8) | + (dev->class & 0xff); + } + } +} +DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_VENDOR_ID_NETMOS, PCI_ANY_ID, + PCI_CLASS_COMMUNICATION_SERIAL, 8, quirk_netmos); + +static void quirk_e100_interrupt(struct pci_dev *dev) +{ + u16 command, pmcsr; + u8 __iomem *csr; + u8 cmd_hi; + + switch (dev->device) { + /* PCI IDs taken from drivers/net/e100.c */ + case 0x1029: + case 0x1030 ... 0x1034: + case 0x1038 ... 0x103E: + case 0x1050 ... 0x1057: + case 0x1059: + case 0x1064 ... 0x106B: + case 0x1091 ... 0x1095: + case 0x1209: + case 0x1229: + case 0x2449: + case 0x2459: + case 0x245D: + case 0x27DC: + break; + default: + return; + } + + /* + * Some firmware hands off the e100 with interrupts enabled, + * which can cause a flood of interrupts if packets are + * received before the driver attaches to the device. So + * disable all e100 interrupts here. The driver will + * re-enable them when it's ready. + */ + pci_read_config_word(dev, PCI_COMMAND, &command); + + if (!(command & PCI_COMMAND_MEMORY) || !pci_resource_start(dev, 0)) + return; + + /* + * Check that the device is in the D0 power state. If it's not, + * there is no point to look any further. + */ + if (dev->pm_cap) { + pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr); + if ((pmcsr & PCI_PM_CTRL_STATE_MASK) != PCI_D0) + return; + } + + /* Convert from PCI bus to resource space. */ + csr = ioremap(pci_resource_start(dev, 0), 8); + if (!csr) { + dev_warn(&dev->dev, "Can't map e100 registers\n"); + return; + } + + cmd_hi = readb(csr + 3); + if (cmd_hi == 0) { + dev_warn(&dev->dev, "Firmware left e100 interrupts enabled; disabling\n"); + writeb(1, csr + 3); + } + + iounmap(csr); +} +DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, + PCI_CLASS_NETWORK_ETHERNET, 8, quirk_e100_interrupt); + +/* + * The 82575 and 82598 may experience data corruption issues when transitioning + * out of L0S. To prevent this we need to disable L0S on the pci-e link + */ +static void quirk_disable_aspm_l0s(struct pci_dev *dev) +{ + dev_info(&dev->dev, "Disabling L0s\n"); + pci_disable_link_state(dev, PCIE_LINK_STATE_L0S); +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10a7, quirk_disable_aspm_l0s); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10a9, quirk_disable_aspm_l0s); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10b6, quirk_disable_aspm_l0s); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c6, quirk_disable_aspm_l0s); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c7, quirk_disable_aspm_l0s); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c8, quirk_disable_aspm_l0s); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10d6, quirk_disable_aspm_l0s); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10db, quirk_disable_aspm_l0s); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10dd, quirk_disable_aspm_l0s); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10e1, quirk_disable_aspm_l0s); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10ec, quirk_disable_aspm_l0s); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10f1, quirk_disable_aspm_l0s); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10f4, quirk_disable_aspm_l0s); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1508, quirk_disable_aspm_l0s); + +static void fixup_rev1_53c810(struct pci_dev *dev) +{ + /* rev 1 ncr53c810 chips don't set the class at all which means + * they don't get their resources remapped. Fix that here. + */ + + if (dev->class == PCI_CLASS_NOT_DEFINED) { + dev_info(&dev->dev, "NCR 53c810 rev 1 detected; setting PCI class\n"); + dev->class = PCI_CLASS_STORAGE_SCSI; + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810); + +/* Enable 1k I/O space granularity on the Intel P64H2 */ +static void quirk_p64h2_1k_io(struct pci_dev *dev) +{ + u16 en1k; + + pci_read_config_word(dev, 0x40, &en1k); + + if (en1k & 0x200) { + dev_info(&dev->dev, "Enable I/O Space to 1KB granularity\n"); + dev->io_window_1k = 1; + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x1460, quirk_p64h2_1k_io); + +/* Under some circumstances, AER is not linked with extended capabilities. + * Force it to be linked by setting the corresponding control bit in the + * config space. + */ +static void quirk_nvidia_ck804_pcie_aer_ext_cap(struct pci_dev *dev) +{ + uint8_t b; + if (pci_read_config_byte(dev, 0xf41, &b) == 0) { + if (!(b & 0x20)) { + pci_write_config_byte(dev, 0xf41, b | 0x20); + dev_info(&dev->dev, "Linking AER extended capability\n"); + } + } +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE, + quirk_nvidia_ck804_pcie_aer_ext_cap); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE, + quirk_nvidia_ck804_pcie_aer_ext_cap); + +static void quirk_via_cx700_pci_parking_caching(struct pci_dev *dev) +{ + /* + * Disable PCI Bus Parking and PCI Master read caching on CX700 + * which causes unspecified timing errors with a VT6212L on the PCI + * bus leading to USB2.0 packet loss. + * + * This quirk is only enabled if a second (on the external PCI bus) + * VT6212L is found -- the CX700 core itself also contains a USB + * host controller with the same PCI ID as the VT6212L. + */ + + /* Count VT6212L instances */ + struct pci_dev *p = pci_get_device(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_8235_USB_2, NULL); + uint8_t b; + + /* p should contain the first (internal) VT6212L -- see if we have + an external one by searching again */ + p = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235_USB_2, p); + if (!p) + return; + pci_dev_put(p); + + if (pci_read_config_byte(dev, 0x76, &b) == 0) { + if (b & 0x40) { + /* Turn off PCI Bus Parking */ + pci_write_config_byte(dev, 0x76, b ^ 0x40); + + dev_info(&dev->dev, "Disabling VIA CX700 PCI parking\n"); + } + } + + if (pci_read_config_byte(dev, 0x72, &b) == 0) { + if (b != 0) { + /* Turn off PCI Master read caching */ + pci_write_config_byte(dev, 0x72, 0x0); + + /* Set PCI Master Bus time-out to "1x16 PCLK" */ + pci_write_config_byte(dev, 0x75, 0x1); + + /* Disable "Read FIFO Timer" */ + pci_write_config_byte(dev, 0x77, 0x0); + + dev_info(&dev->dev, "Disabling VIA CX700 PCI caching\n"); + } + } +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, 0x324e, quirk_via_cx700_pci_parking_caching); + +/* + * For Broadcom 5706, 5708, 5709 rev. A nics, any read beyond the + * VPD end tag will hang the device. This problem was initially + * observed when a vpd entry was created in sysfs + * ('/sys/bus/pci/devices/<id>/vpd'). A read to this sysfs entry + * will dump 32k of data. Reading a full 32k will cause an access + * beyond the VPD end tag causing the device to hang. Once the device + * is hung, the bnx2 driver will not be able to reset the device. + * We believe that it is legal to read beyond the end tag and + * therefore the solution is to limit the read/write length. + */ +static void quirk_brcm_570x_limit_vpd(struct pci_dev *dev) +{ + /* + * Only disable the VPD capability for 5706, 5706S, 5708, + * 5708S and 5709 rev. A + */ + if ((dev->device == PCI_DEVICE_ID_NX2_5706) || + (dev->device == PCI_DEVICE_ID_NX2_5706S) || + (dev->device == PCI_DEVICE_ID_NX2_5708) || + (dev->device == PCI_DEVICE_ID_NX2_5708S) || + ((dev->device == PCI_DEVICE_ID_NX2_5709) && + (dev->revision & 0xf0) == 0x0)) { + if (dev->vpd) + dev->vpd->len = 0x80; + } +} + +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, + PCI_DEVICE_ID_NX2_5706, + quirk_brcm_570x_limit_vpd); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, + PCI_DEVICE_ID_NX2_5706S, + quirk_brcm_570x_limit_vpd); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, + PCI_DEVICE_ID_NX2_5708, + quirk_brcm_570x_limit_vpd); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, + PCI_DEVICE_ID_NX2_5708S, + quirk_brcm_570x_limit_vpd); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, + PCI_DEVICE_ID_NX2_5709, + quirk_brcm_570x_limit_vpd); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, + PCI_DEVICE_ID_NX2_5709S, + quirk_brcm_570x_limit_vpd); + +static void quirk_brcm_5719_limit_mrrs(struct pci_dev *dev) +{ + u32 rev; + + pci_read_config_dword(dev, 0xf4, &rev); + + /* Only CAP the MRRS if the device is a 5719 A0 */ + if (rev == 0x05719000) { + int readrq = pcie_get_readrq(dev); + if (readrq > 2048) + pcie_set_readrq(dev, 2048); + } +} + +DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_BROADCOM, + PCI_DEVICE_ID_TIGON3_5719, + quirk_brcm_5719_limit_mrrs); + +/* Originally in EDAC sources for i82875P: + * Intel tells BIOS developers to hide device 6 which + * configures the overflow device access containing + * the DRBs - this is where we expose device 6. + * http://www.x86-secret.com/articles/tweak/pat/patsecrets-2.htm + */ +static void quirk_unhide_mch_dev6(struct pci_dev *dev) +{ + u8 reg; + + if (pci_read_config_byte(dev, 0xF4, ®) == 0 && !(reg & 0x02)) { + dev_info(&dev->dev, "Enabling MCH 'Overflow' Device\n"); + pci_write_config_byte(dev, 0xF4, reg | 0x02); + } +} + +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82865_HB, + quirk_unhide_mch_dev6); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82875_HB, + quirk_unhide_mch_dev6); + +#ifdef CONFIG_TILEPRO +/* + * The Tilera TILEmpower tilepro platform needs to set the link speed + * to 2.5GT(Giga-Transfers)/s (Gen 1). The default link speed + * setting is 5GT/s (Gen 2). 0x98 is the Link Control2 PCIe + * capability register of the PEX8624 PCIe switch. The switch + * supports link speed auto negotiation, but falsely sets + * the link speed to 5GT/s. + */ +static void quirk_tile_plx_gen1(struct pci_dev *dev) +{ + if (tile_plx_gen1) { + pci_write_config_dword(dev, 0x98, 0x1); + mdelay(50); + } +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8624, quirk_tile_plx_gen1); +#endif /* CONFIG_TILEPRO */ + +#ifdef CONFIG_PCI_MSI +/* Some chipsets do not support MSI. We cannot easily rely on setting + * PCI_BUS_FLAGS_NO_MSI in its bus flags because there are actually + * some other buses controlled by the chipset even if Linux is not + * aware of it. Instead of setting the flag on all buses in the + * machine, simply disable MSI globally. + */ +static void quirk_disable_all_msi(struct pci_dev *dev) +{ + pci_no_msi(); + dev_warn(&dev->dev, "MSI quirk detected; MSI disabled\n"); +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_GCNB_LE, quirk_disable_all_msi); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS400_200, quirk_disable_all_msi); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS480, quirk_disable_all_msi); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3336, quirk_disable_all_msi); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3351, quirk_disable_all_msi); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3364, quirk_disable_all_msi); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8380_0, quirk_disable_all_msi); + +/* Disable MSI on chipsets that are known to not support it */ +static void quirk_disable_msi(struct pci_dev *dev) +{ + if (dev->subordinate) { + dev_warn(&dev->dev, "MSI quirk detected; subordinate MSI disabled\n"); + dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI; + } +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_msi); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, 0xa238, quirk_disable_msi); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x5a3f, quirk_disable_msi); + +/* + * The APC bridge device in AMD 780 family northbridges has some random + * OEM subsystem ID in its vendor ID register (erratum 18), so instead + * we use the possible vendor/device IDs of the host bridge for the + * declared quirk, and search for the APC bridge by slot number. + */ +static void quirk_amd_780_apc_msi(struct pci_dev *host_bridge) +{ + struct pci_dev *apc_bridge; + + apc_bridge = pci_get_slot(host_bridge->bus, PCI_DEVFN(1, 0)); + if (apc_bridge) { + if (apc_bridge->device == 0x9602) + quirk_disable_msi(apc_bridge); + pci_dev_put(apc_bridge); + } +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x9600, quirk_amd_780_apc_msi); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x9601, quirk_amd_780_apc_msi); + +/* Go through the list of Hypertransport capabilities and + * return 1 if a HT MSI capability is found and enabled */ +static int msi_ht_cap_enabled(struct pci_dev *dev) +{ + int pos, ttl = 48; + + pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING); + while (pos && ttl--) { + u8 flags; + + if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, + &flags) == 0) { + dev_info(&dev->dev, "Found %s HT MSI Mapping\n", + flags & HT_MSI_FLAGS_ENABLE ? + "enabled" : "disabled"); + return (flags & HT_MSI_FLAGS_ENABLE) != 0; + } + + pos = pci_find_next_ht_capability(dev, pos, + HT_CAPTYPE_MSI_MAPPING); + } + return 0; +} + +/* Check the hypertransport MSI mapping to know whether MSI is enabled or not */ +static void quirk_msi_ht_cap(struct pci_dev *dev) +{ + if (dev->subordinate && !msi_ht_cap_enabled(dev)) { + dev_warn(&dev->dev, "MSI quirk detected; subordinate MSI disabled\n"); + dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI; + } +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT2000_PCIE, + quirk_msi_ht_cap); + +/* The nVidia CK804 chipset may have 2 HT MSI mappings. + * MSI are supported if the MSI capability set in any of these mappings. + */ +static void quirk_nvidia_ck804_msi_ht_cap(struct pci_dev *dev) +{ + struct pci_dev *pdev; + + if (!dev->subordinate) + return; + + /* check HT MSI cap on this chipset and the root one. + * a single one having MSI is enough to be sure that MSI are supported. + */ + pdev = pci_get_slot(dev->bus, 0); + if (!pdev) + return; + if (!msi_ht_cap_enabled(dev) && !msi_ht_cap_enabled(pdev)) { + dev_warn(&dev->dev, "MSI quirk detected; subordinate MSI disabled\n"); + dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI; + } + pci_dev_put(pdev); +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE, + quirk_nvidia_ck804_msi_ht_cap); + +/* Force enable MSI mapping capability on HT bridges */ +static void ht_enable_msi_mapping(struct pci_dev *dev) +{ + int pos, ttl = 48; + + pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING); + while (pos && ttl--) { + u8 flags; + + if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, + &flags) == 0) { + dev_info(&dev->dev, "Enabling HT MSI Mapping\n"); + + pci_write_config_byte(dev, pos + HT_MSI_FLAGS, + flags | HT_MSI_FLAGS_ENABLE); + } + pos = pci_find_next_ht_capability(dev, pos, + HT_CAPTYPE_MSI_MAPPING); + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS, + PCI_DEVICE_ID_SERVERWORKS_HT1000_PXB, + ht_enable_msi_mapping); + +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE, + ht_enable_msi_mapping); + +/* The P5N32-SLI motherboards from Asus have a problem with msi + * for the MCP55 NIC. It is not yet determined whether the msi problem + * also affects other devices. As for now, turn off msi for this device. + */ +static void nvenet_msi_disable(struct pci_dev *dev) +{ + const char *board_name = dmi_get_system_info(DMI_BOARD_NAME); + + if (board_name && + (strstr(board_name, "P5N32-SLI PREMIUM") || + strstr(board_name, "P5N32-E SLI"))) { + dev_info(&dev->dev, "Disabling msi for MCP55 NIC on P5N32-SLI\n"); + dev->no_msi = 1; + } +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, + PCI_DEVICE_ID_NVIDIA_NVENET_15, + nvenet_msi_disable); + +/* + * Some versions of the MCP55 bridge from Nvidia have a legacy IRQ routing + * config register. This register controls the routing of legacy + * interrupts from devices that route through the MCP55. If this register + * is misprogrammed, interrupts are only sent to the BSP, unlike + * conventional systems where the IRQ is broadcast to all online CPUs. Not + * having this register set properly prevents kdump from booting up + * properly, so let's make sure that we have it set correctly. + * Note that this is an undocumented register. + */ +static void nvbridge_check_legacy_irq_routing(struct pci_dev *dev) +{ + u32 cfg; + + if (!pci_find_capability(dev, PCI_CAP_ID_HT)) + return; + + pci_read_config_dword(dev, 0x74, &cfg); + + if (cfg & ((1 << 2) | (1 << 15))) { + printk(KERN_INFO "Rewriting irq routing register on MCP55\n"); + cfg &= ~((1 << 2) | (1 << 15)); + pci_write_config_dword(dev, 0x74, cfg); + } +} + +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, + PCI_DEVICE_ID_NVIDIA_MCP55_BRIDGE_V0, + nvbridge_check_legacy_irq_routing); + +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, + PCI_DEVICE_ID_NVIDIA_MCP55_BRIDGE_V4, + nvbridge_check_legacy_irq_routing); + +static int ht_check_msi_mapping(struct pci_dev *dev) +{ + int pos, ttl = 48; + int found = 0; + + /* check if there is HT MSI cap or enabled on this device */ + pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING); + while (pos && ttl--) { + u8 flags; + + if (found < 1) + found = 1; + if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, + &flags) == 0) { + if (flags & HT_MSI_FLAGS_ENABLE) { + if (found < 2) { + found = 2; + break; + } + } + } + pos = pci_find_next_ht_capability(dev, pos, + HT_CAPTYPE_MSI_MAPPING); + } + + return found; +} + +static int host_bridge_with_leaf(struct pci_dev *host_bridge) +{ + struct pci_dev *dev; + int pos; + int i, dev_no; + int found = 0; + + dev_no = host_bridge->devfn >> 3; + for (i = dev_no + 1; i < 0x20; i++) { + dev = pci_get_slot(host_bridge->bus, PCI_DEVFN(i, 0)); + if (!dev) + continue; + + /* found next host bridge ?*/ + pos = pci_find_ht_capability(dev, HT_CAPTYPE_SLAVE); + if (pos != 0) { + pci_dev_put(dev); + break; + } + + if (ht_check_msi_mapping(dev)) { + found = 1; + pci_dev_put(dev); + break; + } + pci_dev_put(dev); + } + + return found; +} + +#define PCI_HT_CAP_SLAVE_CTRL0 4 /* link control */ +#define PCI_HT_CAP_SLAVE_CTRL1 8 /* link control to */ + +static int is_end_of_ht_chain(struct pci_dev *dev) +{ + int pos, ctrl_off; + int end = 0; + u16 flags, ctrl; + + pos = pci_find_ht_capability(dev, HT_CAPTYPE_SLAVE); + + if (!pos) + goto out; + + pci_read_config_word(dev, pos + PCI_CAP_FLAGS, &flags); + + ctrl_off = ((flags >> 10) & 1) ? + PCI_HT_CAP_SLAVE_CTRL0 : PCI_HT_CAP_SLAVE_CTRL1; + pci_read_config_word(dev, pos + ctrl_off, &ctrl); + + if (ctrl & (1 << 6)) + end = 1; + +out: + return end; +} + +static void nv_ht_enable_msi_mapping(struct pci_dev *dev) +{ + struct pci_dev *host_bridge; + int pos; + int i, dev_no; + int found = 0; + + dev_no = dev->devfn >> 3; + for (i = dev_no; i >= 0; i--) { + host_bridge = pci_get_slot(dev->bus, PCI_DEVFN(i, 0)); + if (!host_bridge) + continue; + + pos = pci_find_ht_capability(host_bridge, HT_CAPTYPE_SLAVE); + if (pos != 0) { + found = 1; + break; + } + pci_dev_put(host_bridge); + } + + if (!found) + return; + + /* don't enable end_device/host_bridge with leaf directly here */ + if (host_bridge == dev && is_end_of_ht_chain(host_bridge) && + host_bridge_with_leaf(host_bridge)) + goto out; + + /* root did that ! */ + if (msi_ht_cap_enabled(host_bridge)) + goto out; + + ht_enable_msi_mapping(dev); + +out: + pci_dev_put(host_bridge); +} + +static void ht_disable_msi_mapping(struct pci_dev *dev) +{ + int pos, ttl = 48; + + pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING); + while (pos && ttl--) { + u8 flags; + + if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, + &flags) == 0) { + dev_info(&dev->dev, "Disabling HT MSI Mapping\n"); + + pci_write_config_byte(dev, pos + HT_MSI_FLAGS, + flags & ~HT_MSI_FLAGS_ENABLE); + } + pos = pci_find_next_ht_capability(dev, pos, + HT_CAPTYPE_MSI_MAPPING); + } +} + +static void __nv_msi_ht_cap_quirk(struct pci_dev *dev, int all) +{ + struct pci_dev *host_bridge; + int pos; + int found; + + if (!pci_msi_enabled()) + return; + + /* check if there is HT MSI cap or enabled on this device */ + found = ht_check_msi_mapping(dev); + + /* no HT MSI CAP */ + if (found == 0) + return; + + /* + * HT MSI mapping should be disabled on devices that are below + * a non-Hypertransport host bridge. Locate the host bridge... + */ + host_bridge = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0)); + if (host_bridge == NULL) { + dev_warn(&dev->dev, "nv_msi_ht_cap_quirk didn't locate host bridge\n"); + return; + } + + pos = pci_find_ht_capability(host_bridge, HT_CAPTYPE_SLAVE); + if (pos != 0) { + /* Host bridge is to HT */ + if (found == 1) { + /* it is not enabled, try to enable it */ + if (all) + ht_enable_msi_mapping(dev); + else + nv_ht_enable_msi_mapping(dev); + } + goto out; + } + + /* HT MSI is not enabled */ + if (found == 1) + goto out; + + /* Host bridge is not to HT, disable HT MSI mapping on this device */ + ht_disable_msi_mapping(dev); + +out: + pci_dev_put(host_bridge); +} + +static void nv_msi_ht_cap_quirk_all(struct pci_dev *dev) +{ + return __nv_msi_ht_cap_quirk(dev, 1); +} + +static void nv_msi_ht_cap_quirk_leaf(struct pci_dev *dev) +{ + return __nv_msi_ht_cap_quirk(dev, 0); +} + +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, nv_msi_ht_cap_quirk_leaf); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, nv_msi_ht_cap_quirk_leaf); + +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_ANY_ID, nv_msi_ht_cap_quirk_all); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AL, PCI_ANY_ID, nv_msi_ht_cap_quirk_all); + +static void quirk_msi_intx_disable_bug(struct pci_dev *dev) +{ + dev->dev_flags |= PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG; +} +static void quirk_msi_intx_disable_ati_bug(struct pci_dev *dev) +{ + struct pci_dev *p; + + /* SB700 MSI issue will be fixed at HW level from revision A21, + * we need check PCI REVISION ID of SMBus controller to get SB700 + * revision. + */ + p = pci_get_device(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS, + NULL); + if (!p) + return; + + if ((p->revision < 0x3B) && (p->revision >= 0x30)) + dev->dev_flags |= PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG; + pci_dev_put(p); +} +static void quirk_msi_intx_disable_qca_bug(struct pci_dev *dev) +{ + /* AR816X/AR817X/E210X MSI is fixed at HW level from revision 0x18 */ + if (dev->revision < 0x18) { + dev_info(&dev->dev, "set MSI_INTX_DISABLE_BUG flag\n"); + dev->dev_flags |= PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG; + } +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, + PCI_DEVICE_ID_TIGON3_5780, + quirk_msi_intx_disable_bug); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, + PCI_DEVICE_ID_TIGON3_5780S, + quirk_msi_intx_disable_bug); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, + PCI_DEVICE_ID_TIGON3_5714, + quirk_msi_intx_disable_bug); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, + PCI_DEVICE_ID_TIGON3_5714S, + quirk_msi_intx_disable_bug); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, + PCI_DEVICE_ID_TIGON3_5715, + quirk_msi_intx_disable_bug); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, + PCI_DEVICE_ID_TIGON3_5715S, + quirk_msi_intx_disable_bug); + +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4390, + quirk_msi_intx_disable_ati_bug); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4391, + quirk_msi_intx_disable_ati_bug); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4392, + quirk_msi_intx_disable_ati_bug); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4393, + quirk_msi_intx_disable_ati_bug); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4394, + quirk_msi_intx_disable_ati_bug); + +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4373, + quirk_msi_intx_disable_bug); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4374, + quirk_msi_intx_disable_bug); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4375, + quirk_msi_intx_disable_bug); + +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1062, + quirk_msi_intx_disable_bug); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1063, + quirk_msi_intx_disable_bug); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x2060, + quirk_msi_intx_disable_bug); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x2062, + quirk_msi_intx_disable_bug); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1073, + quirk_msi_intx_disable_bug); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1083, + quirk_msi_intx_disable_bug); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1090, + quirk_msi_intx_disable_qca_bug); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1091, + quirk_msi_intx_disable_qca_bug); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x10a0, + quirk_msi_intx_disable_qca_bug); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x10a1, + quirk_msi_intx_disable_qca_bug); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0xe091, + quirk_msi_intx_disable_qca_bug); +#endif /* CONFIG_PCI_MSI */ + +/* Allow manual resource allocation for PCI hotplug bridges + * via pci=hpmemsize=nnM and pci=hpiosize=nnM parameters. For + * some PCI-PCI hotplug bridges, like PLX 6254 (former HINT HB6), + * kernel fails to allocate resources when hotplug device is + * inserted and PCI bus is rescanned. + */ +static void quirk_hotplug_bridge(struct pci_dev *dev) +{ + dev->is_hotplug_bridge = 1; +} + +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_HINT, 0x0020, quirk_hotplug_bridge); + +/* + * This is a quirk for the Ricoh MMC controller found as a part of + * some mulifunction chips. + + * This is very similar and based on the ricoh_mmc driver written by + * Philip Langdale. Thank you for these magic sequences. + * + * These chips implement the four main memory card controllers (SD, MMC, MS, xD) + * and one or both of cardbus or firewire. + * + * It happens that they implement SD and MMC + * support as separate controllers (and PCI functions). The linux SDHCI + * driver supports MMC cards but the chip detects MMC cards in hardware + * and directs them to the MMC controller - so the SDHCI driver never sees + * them. + * + * To get around this, we must disable the useless MMC controller. + * At that point, the SDHCI controller will start seeing them + * It seems to be the case that the relevant PCI registers to deactivate the + * MMC controller live on PCI function 0, which might be the cardbus controller + * or the firewire controller, depending on the particular chip in question + * + * This has to be done early, because as soon as we disable the MMC controller + * other pci functions shift up one level, e.g. function #2 becomes function + * #1, and this will confuse the pci core. + */ + +#ifdef CONFIG_MMC_RICOH_MMC +static void ricoh_mmc_fixup_rl5c476(struct pci_dev *dev) +{ + /* disable via cardbus interface */ + u8 write_enable; + u8 write_target; + u8 disable; + + /* disable must be done via function #0 */ + if (PCI_FUNC(dev->devfn)) + return; + + pci_read_config_byte(dev, 0xB7, &disable); + if (disable & 0x02) + return; + + pci_read_config_byte(dev, 0x8E, &write_enable); + pci_write_config_byte(dev, 0x8E, 0xAA); + pci_read_config_byte(dev, 0x8D, &write_target); + pci_write_config_byte(dev, 0x8D, 0xB7); + pci_write_config_byte(dev, 0xB7, disable | 0x02); + pci_write_config_byte(dev, 0x8E, write_enable); + pci_write_config_byte(dev, 0x8D, write_target); + + dev_notice(&dev->dev, "proprietary Ricoh MMC controller disabled (via cardbus function)\n"); + dev_notice(&dev->dev, "MMC cards are now supported by standard SDHCI controller\n"); +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, ricoh_mmc_fixup_rl5c476); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, ricoh_mmc_fixup_rl5c476); + +static void ricoh_mmc_fixup_r5c832(struct pci_dev *dev) +{ + /* disable via firewire interface */ + u8 write_enable; + u8 disable; + + /* disable must be done via function #0 */ + if (PCI_FUNC(dev->devfn)) + return; + /* + * RICOH 0xe822 and 0xe823 SD/MMC card readers fail to recognize + * certain types of SD/MMC cards. Lowering the SD base + * clock frequency from 200Mhz to 50Mhz fixes this issue. + * + * 0x150 - SD2.0 mode enable for changing base clock + * frequency to 50Mhz + * 0xe1 - Base clock frequency + * 0x32 - 50Mhz new clock frequency + * 0xf9 - Key register for 0x150 + * 0xfc - key register for 0xe1 + */ + if (dev->device == PCI_DEVICE_ID_RICOH_R5CE822 || + dev->device == PCI_DEVICE_ID_RICOH_R5CE823) { + pci_write_config_byte(dev, 0xf9, 0xfc); + pci_write_config_byte(dev, 0x150, 0x10); + pci_write_config_byte(dev, 0xf9, 0x00); + pci_write_config_byte(dev, 0xfc, 0x01); + pci_write_config_byte(dev, 0xe1, 0x32); + pci_write_config_byte(dev, 0xfc, 0x00); + + dev_notice(&dev->dev, "MMC controller base frequency changed to 50Mhz.\n"); + } + + pci_read_config_byte(dev, 0xCB, &disable); + + if (disable & 0x02) + return; + + pci_read_config_byte(dev, 0xCA, &write_enable); + pci_write_config_byte(dev, 0xCA, 0x57); + pci_write_config_byte(dev, 0xCB, disable | 0x02); + pci_write_config_byte(dev, 0xCA, write_enable); + + dev_notice(&dev->dev, "proprietary Ricoh MMC controller disabled (via firewire function)\n"); + dev_notice(&dev->dev, "MMC cards are now supported by standard SDHCI controller\n"); + +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE822, ricoh_mmc_fixup_r5c832); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE822, ricoh_mmc_fixup_r5c832); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE823, ricoh_mmc_fixup_r5c832); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE823, ricoh_mmc_fixup_r5c832); +#endif /*CONFIG_MMC_RICOH_MMC*/ + +#ifdef CONFIG_DMAR_TABLE +#define VTUNCERRMSK_REG 0x1ac +#define VTD_MSK_SPEC_ERRORS (1 << 31) +/* + * This is a quirk for masking vt-d spec defined errors to platform error + * handling logic. With out this, platforms using Intel 7500, 5500 chipsets + * (and the derivative chipsets like X58 etc) seem to generate NMI/SMI (based + * on the RAS config settings of the platform) when a vt-d fault happens. + * The resulting SMI caused the system to hang. + * + * VT-d spec related errors are already handled by the VT-d OS code, so no + * need to report the same error through other channels. + */ +static void vtd_mask_spec_errors(struct pci_dev *dev) +{ + u32 word; + + pci_read_config_dword(dev, VTUNCERRMSK_REG, &word); + pci_write_config_dword(dev, VTUNCERRMSK_REG, word | VTD_MSK_SPEC_ERRORS); +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x342e, vtd_mask_spec_errors); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x3c28, vtd_mask_spec_errors); +#endif + +static void fixup_ti816x_class(struct pci_dev *dev) +{ + /* TI 816x devices do not have class code set when in PCIe boot mode */ + dev_info(&dev->dev, "Setting PCI class for 816x PCIe device\n"); + dev->class = PCI_CLASS_MULTIMEDIA_VIDEO; +} +DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_TI, 0xb800, + PCI_CLASS_NOT_DEFINED, 0, fixup_ti816x_class); + +/* Some PCIe devices do not work reliably with the claimed maximum + * payload size supported. + */ +static void fixup_mpss_256(struct pci_dev *dev) +{ + dev->pcie_mpss = 1; /* 256 bytes */ +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE, + PCI_DEVICE_ID_SOLARFLARE_SFC4000A_0, fixup_mpss_256); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE, + PCI_DEVICE_ID_SOLARFLARE_SFC4000A_1, fixup_mpss_256); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE, + PCI_DEVICE_ID_SOLARFLARE_SFC4000B, fixup_mpss_256); + +/* Intel 5000 and 5100 Memory controllers have an errata with read completion + * coalescing (which is enabled by default on some BIOSes) and MPS of 256B. + * Since there is no way of knowing what the PCIE MPS on each fabric will be + * until all of the devices are discovered and buses walked, read completion + * coalescing must be disabled. Unfortunately, it cannot be re-enabled because + * it is possible to hotplug a device with MPS of 256B. + */ +static void quirk_intel_mc_errata(struct pci_dev *dev) +{ + int err; + u16 rcc; + + if (pcie_bus_config == PCIE_BUS_TUNE_OFF) + return; + + /* Intel errata specifies bits to change but does not say what they are. + * Keeping them magical until such time as the registers and values can + * be explained. + */ + err = pci_read_config_word(dev, 0x48, &rcc); + if (err) { + dev_err(&dev->dev, "Error attempting to read the read completion coalescing register\n"); + return; + } + + if (!(rcc & (1 << 10))) + return; + + rcc &= ~(1 << 10); + + err = pci_write_config_word(dev, 0x48, rcc); + if (err) { + dev_err(&dev->dev, "Error attempting to write the read completion coalescing register\n"); + return; + } + + pr_info_once("Read completion coalescing disabled due to hardware errata relating to 256B MPS\n"); +} +/* Intel 5000 series memory controllers and ports 2-7 */ +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25c0, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25d0, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25d4, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25d8, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e2, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e3, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e4, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e5, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e6, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e7, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25f7, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25f8, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25f9, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25fa, quirk_intel_mc_errata); +/* Intel 5100 series memory controllers and ports 2-7 */ +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65c0, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e2, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e3, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e4, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e5, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e6, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e7, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f7, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f8, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f9, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65fa, quirk_intel_mc_errata); + + +/* + * Ivytown NTB BAR sizes are misreported by the hardware due to an erratum. To + * work around this, query the size it should be configured to by the device and + * modify the resource end to correspond to this new size. + */ +static void quirk_intel_ntb(struct pci_dev *dev) +{ + int rc; + u8 val; + + rc = pci_read_config_byte(dev, 0x00D0, &val); + if (rc) + return; + + dev->resource[2].end = dev->resource[2].start + ((u64) 1 << val) - 1; + + rc = pci_read_config_byte(dev, 0x00D1, &val); + if (rc) + return; + + dev->resource[4].end = dev->resource[4].start + ((u64) 1 << val) - 1; +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0e08, quirk_intel_ntb); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0e0d, quirk_intel_ntb); + +static ktime_t fixup_debug_start(struct pci_dev *dev, + void (*fn)(struct pci_dev *dev)) +{ + ktime_t calltime = ktime_set(0, 0); + + dev_dbg(&dev->dev, "calling %pF\n", fn); + if (initcall_debug) { + pr_debug("calling %pF @ %i for %s\n", + fn, task_pid_nr(current), dev_name(&dev->dev)); + calltime = ktime_get(); + } + + return calltime; +} + +static void fixup_debug_report(struct pci_dev *dev, ktime_t calltime, + void (*fn)(struct pci_dev *dev)) +{ + ktime_t delta, rettime; + unsigned long long duration; + + if (initcall_debug) { + rettime = ktime_get(); + delta = ktime_sub(rettime, calltime); + duration = (unsigned long long) ktime_to_ns(delta) >> 10; + pr_debug("pci fixup %pF returned after %lld usecs for %s\n", + fn, duration, dev_name(&dev->dev)); + } +} + +/* + * Some BIOS implementations leave the Intel GPU interrupts enabled, + * even though no one is handling them (f.e. i915 driver is never loaded). + * Additionally the interrupt destination is not set up properly + * and the interrupt ends up -somewhere-. + * + * These spurious interrupts are "sticky" and the kernel disables + * the (shared) interrupt line after 100.000+ generated interrupts. + * + * Fix it by disabling the still enabled interrupts. + * This resolves crashes often seen on monitor unplug. + */ +#define I915_DEIER_REG 0x4400c +static void disable_igfx_irq(struct pci_dev *dev) +{ + void __iomem *regs = pci_iomap(dev, 0, 0); + if (regs == NULL) { + dev_warn(&dev->dev, "igfx quirk: Can't iomap PCI device\n"); + return; + } + + /* Check if any interrupt line is still enabled */ + if (readl(regs + I915_DEIER_REG) != 0) { + dev_warn(&dev->dev, "BIOS left Intel GPU interrupts enabled; disabling\n"); + + writel(0, regs + I915_DEIER_REG); + } + + pci_iounmap(dev, regs); +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0102, disable_igfx_irq); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0152, disable_igfx_irq); + +/* + * PCI devices which are on Intel chips can skip the 10ms delay + * before entering D3 mode. + */ +static void quirk_remove_d3_delay(struct pci_dev *dev) +{ + dev->d3_delay = 0; +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0c00, quirk_remove_d3_delay); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0412, quirk_remove_d3_delay); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0c0c, quirk_remove_d3_delay); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c31, quirk_remove_d3_delay); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c3a, quirk_remove_d3_delay); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c3d, quirk_remove_d3_delay); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c2d, quirk_remove_d3_delay); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c20, quirk_remove_d3_delay); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c18, quirk_remove_d3_delay); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c1c, quirk_remove_d3_delay); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c26, quirk_remove_d3_delay); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c4e, quirk_remove_d3_delay); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c02, quirk_remove_d3_delay); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c22, quirk_remove_d3_delay); + +/* + * Some devices may pass our check in pci_intx_mask_supported if + * PCI_COMMAND_INTX_DISABLE works though they actually do not properly + * support this feature. + */ +static void quirk_broken_intx_masking(struct pci_dev *dev) +{ + dev->broken_intx_masking = 1; +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CHELSIO, 0x0030, + quirk_broken_intx_masking); +DECLARE_PCI_FIXUP_HEADER(0x1814, 0x0601, /* Ralink RT2800 802.11n PCI */ + quirk_broken_intx_masking); +/* + * Realtek RTL8169 PCI Gigabit Ethernet Controller (rev 10) + * Subsystem: Realtek RTL8169/8110 Family PCI Gigabit Ethernet NIC + * + * RTL8110SC - Fails under PCI device assignment using DisINTx masking. + */ +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_REALTEK, 0x8169, + quirk_broken_intx_masking); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MELLANOX, PCI_ANY_ID, + quirk_broken_intx_masking); + +static void quirk_no_bus_reset(struct pci_dev *dev) +{ + dev->dev_flags |= PCI_DEV_FLAGS_NO_BUS_RESET; +} + +/* + * Atheros AR93xx chips do not behave after a bus reset. The device will + * throw a Link Down error on AER-capable systems and regardless of AER, + * config space of the device is never accessible again and typically + * causes the system to hang or reset when access is attempted. + * http://www.spinics.net/lists/linux-pci/msg34797.html + */ +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x0030, quirk_no_bus_reset); + +static void quirk_no_pm_reset(struct pci_dev *dev) +{ + /* + * We can't do a bus reset on root bus devices, but an ineffective + * PM reset may be better than nothing. + */ + if (!pci_is_root_bus(dev->bus)) + dev->dev_flags |= PCI_DEV_FLAGS_NO_PM_RESET; +} + +/* + * Some AMD/ATI GPUS (HD8570 - Oland) report that a D3hot->D0 transition + * causes a reset (i.e., they advertise NoSoftRst-). This transition seems + * to have no effect on the device: it retains the framebuffer contents and + * monitor sync. Advertising this support makes other layers, like VFIO, + * assume pci_reset_function() is viable for this device. Mark it as + * unavailable to skip it when testing reset methods. + */ +DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_VENDOR_ID_ATI, PCI_ANY_ID, + PCI_CLASS_DISPLAY_VGA, 8, quirk_no_pm_reset); + +#ifdef CONFIG_ACPI +/* + * Apple: Shutdown Cactus Ridge Thunderbolt controller. + * + * On Apple hardware the Cactus Ridge Thunderbolt controller needs to be + * shutdown before suspend. Otherwise the native host interface (NHI) will not + * be present after resume if a device was plugged in before suspend. + * + * The thunderbolt controller consists of a pcie switch with downstream + * bridges leading to the NHI and to the tunnel pci bridges. + * + * This quirk cuts power to the whole chip. Therefore we have to apply it + * during suspend_noirq of the upstream bridge. + * + * Power is automagically restored before resume. No action is needed. + */ +static void quirk_apple_poweroff_thunderbolt(struct pci_dev *dev) +{ + acpi_handle bridge, SXIO, SXFP, SXLV; + + if (!dmi_match(DMI_BOARD_VENDOR, "Apple Inc.")) + return; + if (pci_pcie_type(dev) != PCI_EXP_TYPE_UPSTREAM) + return; + bridge = ACPI_HANDLE(&dev->dev); + if (!bridge) + return; + /* + * SXIO and SXLV are present only on machines requiring this quirk. + * TB bridges in external devices might have the same device id as those + * on the host, but they will not have the associated ACPI methods. This + * implicitly checks that we are at the right bridge. + */ + if (ACPI_FAILURE(acpi_get_handle(bridge, "DSB0.NHI0.SXIO", &SXIO)) + || ACPI_FAILURE(acpi_get_handle(bridge, "DSB0.NHI0.SXFP", &SXFP)) + || ACPI_FAILURE(acpi_get_handle(bridge, "DSB0.NHI0.SXLV", &SXLV))) + return; + dev_info(&dev->dev, "quirk: cutting power to thunderbolt controller...\n"); + + /* magic sequence */ + acpi_execute_simple_method(SXIO, NULL, 1); + acpi_execute_simple_method(SXFP, NULL, 0); + msleep(300); + acpi_execute_simple_method(SXLV, NULL, 0); + acpi_execute_simple_method(SXIO, NULL, 0); + acpi_execute_simple_method(SXLV, NULL, 0); +} +DECLARE_PCI_FIXUP_SUSPEND_LATE(PCI_VENDOR_ID_INTEL, 0x1547, + quirk_apple_poweroff_thunderbolt); + +/* + * Apple: Wait for the thunderbolt controller to reestablish pci tunnels. + * + * During suspend the thunderbolt controller is reset and all pci + * tunnels are lost. The NHI driver will try to reestablish all tunnels + * during resume. We have to manually wait for the NHI since there is + * no parent child relationship between the NHI and the tunneled + * bridges. + */ +static void quirk_apple_wait_for_thunderbolt(struct pci_dev *dev) +{ + struct pci_dev *sibling = NULL; + struct pci_dev *nhi = NULL; + + if (!dmi_match(DMI_BOARD_VENDOR, "Apple Inc.")) + return; + if (pci_pcie_type(dev) != PCI_EXP_TYPE_DOWNSTREAM) + return; + /* + * Find the NHI and confirm that we are a bridge on the tb host + * controller and not on a tb endpoint. + */ + sibling = pci_get_slot(dev->bus, 0x0); + if (sibling == dev) + goto out; /* we are the downstream bridge to the NHI */ + if (!sibling || !sibling->subordinate) + goto out; + nhi = pci_get_slot(sibling->subordinate, 0x0); + if (!nhi) + goto out; + if (nhi->vendor != PCI_VENDOR_ID_INTEL + || (nhi->device != 0x1547 && nhi->device != 0x156c) + || nhi->subsystem_vendor != 0x2222 + || nhi->subsystem_device != 0x1111) + goto out; + dev_info(&dev->dev, "quirk: waiting for thunderbolt to reestablish PCI tunnels...\n"); + device_pm_wait_for_dev(&dev->dev, &nhi->dev); +out: + pci_dev_put(nhi); + pci_dev_put(sibling); +} +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, 0x1547, + quirk_apple_wait_for_thunderbolt); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, 0x156d, + quirk_apple_wait_for_thunderbolt); +#endif + +static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, + struct pci_fixup *end) +{ + ktime_t calltime; + + for (; f < end; f++) + if ((f->class == (u32) (dev->class >> f->class_shift) || + f->class == (u32) PCI_ANY_ID) && + (f->vendor == dev->vendor || + f->vendor == (u16) PCI_ANY_ID) && + (f->device == dev->device || + f->device == (u16) PCI_ANY_ID)) { + calltime = fixup_debug_start(dev, f->hook); + f->hook(dev); + fixup_debug_report(dev, calltime, f->hook); + } +} + +extern struct pci_fixup __start_pci_fixups_early[]; +extern struct pci_fixup __end_pci_fixups_early[]; +extern struct pci_fixup __start_pci_fixups_header[]; +extern struct pci_fixup __end_pci_fixups_header[]; +extern struct pci_fixup __start_pci_fixups_final[]; +extern struct pci_fixup __end_pci_fixups_final[]; +extern struct pci_fixup __start_pci_fixups_enable[]; +extern struct pci_fixup __end_pci_fixups_enable[]; +extern struct pci_fixup __start_pci_fixups_resume[]; +extern struct pci_fixup __end_pci_fixups_resume[]; +extern struct pci_fixup __start_pci_fixups_resume_early[]; +extern struct pci_fixup __end_pci_fixups_resume_early[]; +extern struct pci_fixup __start_pci_fixups_suspend[]; +extern struct pci_fixup __end_pci_fixups_suspend[]; +extern struct pci_fixup __start_pci_fixups_suspend_late[]; +extern struct pci_fixup __end_pci_fixups_suspend_late[]; + +static bool pci_apply_fixup_final_quirks; + +void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev) +{ + struct pci_fixup *start, *end; + + switch (pass) { + case pci_fixup_early: + start = __start_pci_fixups_early; + end = __end_pci_fixups_early; + break; + + case pci_fixup_header: + start = __start_pci_fixups_header; + end = __end_pci_fixups_header; + break; + + case pci_fixup_final: + if (!pci_apply_fixup_final_quirks) + return; + start = __start_pci_fixups_final; + end = __end_pci_fixups_final; + break; + + case pci_fixup_enable: + start = __start_pci_fixups_enable; + end = __end_pci_fixups_enable; + break; + + case pci_fixup_resume: + start = __start_pci_fixups_resume; + end = __end_pci_fixups_resume; + break; + + case pci_fixup_resume_early: + start = __start_pci_fixups_resume_early; + end = __end_pci_fixups_resume_early; + break; + + case pci_fixup_suspend: + start = __start_pci_fixups_suspend; + end = __end_pci_fixups_suspend; + break; + + case pci_fixup_suspend_late: + start = __start_pci_fixups_suspend_late; + end = __end_pci_fixups_suspend_late; + break; + + default: + /* stupid compiler warning, you would think with an enum... */ + return; + } + pci_do_fixups(dev, start, end); +} +EXPORT_SYMBOL(pci_fixup_device); + + +static int __init pci_apply_final_quirks(void) +{ + struct pci_dev *dev = NULL; + u8 cls = 0; + u8 tmp; + + if (pci_cache_line_size) + printk(KERN_DEBUG "PCI: CLS %u bytes\n", + pci_cache_line_size << 2); + + pci_apply_fixup_final_quirks = true; + for_each_pci_dev(dev) { + pci_fixup_device(pci_fixup_final, dev); + /* + * If arch hasn't set it explicitly yet, use the CLS + * value shared by all PCI devices. If there's a + * mismatch, fall back to the default value. + */ + if (!pci_cache_line_size) { + pci_read_config_byte(dev, PCI_CACHE_LINE_SIZE, &tmp); + if (!cls) + cls = tmp; + if (!tmp || cls == tmp) + continue; + + printk(KERN_DEBUG "PCI: CLS mismatch (%u != %u), using %u bytes\n", + cls << 2, tmp << 2, + pci_dfl_cache_line_size << 2); + pci_cache_line_size = pci_dfl_cache_line_size; + } + } + + if (!pci_cache_line_size) { + printk(KERN_DEBUG "PCI: CLS %u bytes, default %u\n", + cls << 2, pci_dfl_cache_line_size << 2); + pci_cache_line_size = cls ? cls : pci_dfl_cache_line_size; + } + + return 0; +} + +fs_initcall_sync(pci_apply_final_quirks); + +/* + * Followings are device-specific reset methods which can be used to + * reset a single function if other methods (e.g. FLR, PM D0->D3) are + * not available. + */ +static int reset_intel_generic_dev(struct pci_dev *dev, int probe) +{ + int pos; + + /* only implement PCI_CLASS_SERIAL_USB at present */ + if (dev->class == PCI_CLASS_SERIAL_USB) { + pos = pci_find_capability(dev, PCI_CAP_ID_VNDR); + if (!pos) + return -ENOTTY; + + if (probe) + return 0; + + pci_write_config_byte(dev, pos + 0x4, 1); + msleep(100); + + return 0; + } else { + return -ENOTTY; + } +} + +static int reset_intel_82599_sfp_virtfn(struct pci_dev *dev, int probe) +{ + /* + * http://www.intel.com/content/dam/doc/datasheet/82599-10-gbe-controller-datasheet.pdf + * + * The 82599 supports FLR on VFs, but FLR support is reported only + * in the PF DEVCAP (sec 9.3.10.4), not in the VF DEVCAP (sec 9.5). + * Therefore, we can't use pcie_flr(), which checks the VF DEVCAP. + */ + + if (probe) + return 0; + + if (!pci_wait_for_pending_transaction(dev)) + dev_err(&dev->dev, "transaction is not cleared; proceeding with reset anyway\n"); + + pcie_capability_set_word(dev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_BCR_FLR); + + msleep(100); + + return 0; +} + +#include "../gpu/drm/i915/i915_reg.h" +#define MSG_CTL 0x45010 +#define NSDE_PWR_STATE 0xd0100 +#define IGD_OPERATION_TIMEOUT 10000 /* set timeout 10 seconds */ + +static int reset_ivb_igd(struct pci_dev *dev, int probe) +{ + void __iomem *mmio_base; + unsigned long timeout; + u32 val; + + if (probe) + return 0; + + mmio_base = pci_iomap(dev, 0, 0); + if (!mmio_base) + return -ENOMEM; + + iowrite32(0x00000002, mmio_base + MSG_CTL); + + /* + * Clobbering SOUTH_CHICKEN2 register is fine only if the next + * driver loaded sets the right bits. However, this's a reset and + * the bits have been set by i915 previously, so we clobber + * SOUTH_CHICKEN2 register directly here. + */ + iowrite32(0x00000005, mmio_base + SOUTH_CHICKEN2); + + val = ioread32(mmio_base + PCH_PP_CONTROL) & 0xfffffffe; + iowrite32(val, mmio_base + PCH_PP_CONTROL); + + timeout = jiffies + msecs_to_jiffies(IGD_OPERATION_TIMEOUT); + do { + val = ioread32(mmio_base + PCH_PP_STATUS); + if ((val & 0xb0000000) == 0) + goto reset_complete; + msleep(10); + } while (time_before(jiffies, timeout)); + dev_warn(&dev->dev, "timeout during reset\n"); + +reset_complete: + iowrite32(0x00000002, mmio_base + NSDE_PWR_STATE); + + pci_iounmap(dev, mmio_base); + return 0; +} + +/* + * Device-specific reset method for Chelsio T4-based adapters. + */ +static int reset_chelsio_generic_dev(struct pci_dev *dev, int probe) +{ + u16 old_command; + u16 msix_flags; + + /* + * If this isn't a Chelsio T4-based device, return -ENOTTY indicating + * that we have no device-specific reset method. + */ + if ((dev->device & 0xf000) != 0x4000) + return -ENOTTY; + + /* + * If this is the "probe" phase, return 0 indicating that we can + * reset this device. + */ + if (probe) + return 0; + + /* + * T4 can wedge if there are DMAs in flight within the chip and Bus + * Master has been disabled. We need to have it on till the Function + * Level Reset completes. (BUS_MASTER is disabled in + * pci_reset_function()). + */ + pci_read_config_word(dev, PCI_COMMAND, &old_command); + pci_write_config_word(dev, PCI_COMMAND, + old_command | PCI_COMMAND_MASTER); + + /* + * Perform the actual device function reset, saving and restoring + * configuration information around the reset. + */ + pci_save_state(dev); + + /* + * T4 also suffers a Head-Of-Line blocking problem if MSI-X interrupts + * are disabled when an MSI-X interrupt message needs to be delivered. + * So we briefly re-enable MSI-X interrupts for the duration of the + * FLR. The pci_restore_state() below will restore the original + * MSI-X state. + */ + pci_read_config_word(dev, dev->msix_cap+PCI_MSIX_FLAGS, &msix_flags); + if ((msix_flags & PCI_MSIX_FLAGS_ENABLE) == 0) + pci_write_config_word(dev, dev->msix_cap+PCI_MSIX_FLAGS, + msix_flags | + PCI_MSIX_FLAGS_ENABLE | + PCI_MSIX_FLAGS_MASKALL); + + /* + * Start of pcie_flr() code sequence. This reset code is a copy of + * the guts of pcie_flr() because that's not an exported function. + */ + + if (!pci_wait_for_pending_transaction(dev)) + dev_err(&dev->dev, "transaction is not cleared; proceeding with reset anyway\n"); + + pcie_capability_set_word(dev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_BCR_FLR); + msleep(100); + + /* + * End of pcie_flr() code sequence. + */ + + /* + * Restore the configuration information (BAR values, etc.) including + * the original PCI Configuration Space Command word, and return + * success. + */ + pci_restore_state(dev); + pci_write_config_word(dev, PCI_COMMAND, old_command); + return 0; +} + +#define PCI_DEVICE_ID_INTEL_82599_SFP_VF 0x10ed +#define PCI_DEVICE_ID_INTEL_IVB_M_VGA 0x0156 +#define PCI_DEVICE_ID_INTEL_IVB_M2_VGA 0x0166 + +static const struct pci_dev_reset_methods pci_dev_reset_methods[] = { + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82599_SFP_VF, + reset_intel_82599_sfp_virtfn }, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IVB_M_VGA, + reset_ivb_igd }, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IVB_M2_VGA, + reset_ivb_igd }, + { PCI_VENDOR_ID_INTEL, PCI_ANY_ID, + reset_intel_generic_dev }, + { PCI_VENDOR_ID_CHELSIO, PCI_ANY_ID, + reset_chelsio_generic_dev }, + { 0 } +}; + +/* + * These device-specific reset methods are here rather than in a driver + * because when a host assigns a device to a guest VM, the host may need + * to reset the device but probably doesn't have a driver for it. + */ +int pci_dev_specific_reset(struct pci_dev *dev, int probe) +{ + const struct pci_dev_reset_methods *i; + + for (i = pci_dev_reset_methods; i->reset; i++) { + if ((i->vendor == dev->vendor || + i->vendor == (u16)PCI_ANY_ID) && + (i->device == dev->device || + i->device == (u16)PCI_ANY_ID)) + return i->reset(dev, probe); + } + + return -ENOTTY; +} + +static void quirk_dma_func0_alias(struct pci_dev *dev) +{ + if (PCI_FUNC(dev->devfn) != 0) { + dev->dma_alias_devfn = PCI_DEVFN(PCI_SLOT(dev->devfn), 0); + dev->dev_flags |= PCI_DEV_FLAGS_DMA_ALIAS_DEVFN; + } +} + +/* + * https://bugzilla.redhat.com/show_bug.cgi?id=605888 + * + * Some Ricoh devices use function 0 as the PCIe requester ID for DMA. + */ +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_RICOH, 0xe832, quirk_dma_func0_alias); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_RICOH, 0xe476, quirk_dma_func0_alias); + +static void quirk_dma_func1_alias(struct pci_dev *dev) +{ + if (PCI_FUNC(dev->devfn) != 1) { + dev->dma_alias_devfn = PCI_DEVFN(PCI_SLOT(dev->devfn), 1); + dev->dev_flags |= PCI_DEV_FLAGS_DMA_ALIAS_DEVFN; + } +} + +/* + * Marvell 88SE9123 uses function 1 as the requester ID for DMA. In some + * SKUs function 1 is present and is a legacy IDE controller, in other + * SKUs this function is not present, making this a ghost requester. + * https://bugzilla.kernel.org/show_bug.cgi?id=42679 + */ +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9123, + quirk_dma_func1_alias); +/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c14 */ +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9130, + quirk_dma_func1_alias); +/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c47 + c57 */ +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9172, + quirk_dma_func1_alias); +/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c59 */ +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x917a, + quirk_dma_func1_alias); +/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c46 */ +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x91a0, + quirk_dma_func1_alias); +/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c49 */ +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9230, + quirk_dma_func1_alias); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TTI, 0x0642, + quirk_dma_func1_alias); +/* https://bugs.gentoo.org/show_bug.cgi?id=497630 */ +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_JMICRON, + PCI_DEVICE_ID_JMICRON_JMB388_ESD, + quirk_dma_func1_alias); + +/* + * Some devices DMA with the wrong devfn, not just the wrong function. + * quirk_fixed_dma_alias() uses this table to create fixed aliases, where + * the alias is "fixed" and independent of the device devfn. + * + * For example, the Adaptec 3405 is a PCIe card with an Intel 80333 I/O + * processor. To software, this appears as a PCIe-to-PCI/X bridge with a + * single device on the secondary bus. In reality, the single exposed + * device at 0e.0 is the Address Translation Unit (ATU) of the controller + * that provides a bridge to the internal bus of the I/O processor. The + * controller supports private devices, which can be hidden from PCI config + * space. In the case of the Adaptec 3405, a private device at 01.0 + * appears to be the DMA engine, which therefore needs to become a DMA + * alias for the device. + */ +static const struct pci_device_id fixed_dma_alias_tbl[] = { + { PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x0285, + PCI_VENDOR_ID_ADAPTEC2, 0x02bb), /* Adaptec 3405 */ + .driver_data = PCI_DEVFN(1, 0) }, + { 0 } +}; + +static void quirk_fixed_dma_alias(struct pci_dev *dev) +{ + const struct pci_device_id *id; + + id = pci_match_id(fixed_dma_alias_tbl, dev); + if (id) { + dev->dma_alias_devfn = id->driver_data; + dev->dev_flags |= PCI_DEV_FLAGS_DMA_ALIAS_DEVFN; + dev_info(&dev->dev, "Enabling fixed DMA alias to %02x.%d\n", + PCI_SLOT(dev->dma_alias_devfn), + PCI_FUNC(dev->dma_alias_devfn)); + } +} + +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ADAPTEC2, 0x0285, quirk_fixed_dma_alias); + +/* + * A few PCIe-to-PCI bridges fail to expose a PCIe capability, resulting in + * using the wrong DMA alias for the device. Some of these devices can be + * used as either forward or reverse bridges, so we need to test whether the + * device is operating in the correct mode. We could probably apply this + * quirk to PCI_ANY_ID, but for now we'll just use known offenders. The test + * is for a non-root, non-PCIe bridge where the upstream device is PCIe and + * is not a PCIe-to-PCI bridge, then @pdev is actually a PCIe-to-PCI bridge. + */ +static void quirk_use_pcie_bridge_dma_alias(struct pci_dev *pdev) +{ + if (!pci_is_root_bus(pdev->bus) && + pdev->hdr_type == PCI_HEADER_TYPE_BRIDGE && + !pci_is_pcie(pdev) && pci_is_pcie(pdev->bus->self) && + pci_pcie_type(pdev->bus->self) != PCI_EXP_TYPE_PCI_BRIDGE) + pdev->dev_flags |= PCI_DEV_FLAG_PCIE_BRIDGE_ALIAS; +} +/* ASM1083/1085, https://bugzilla.kernel.org/show_bug.cgi?id=44881#c46 */ +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ASMEDIA, 0x1080, + quirk_use_pcie_bridge_dma_alias); +/* Tundra 8113, https://bugzilla.kernel.org/show_bug.cgi?id=44881#c43 */ +DECLARE_PCI_FIXUP_HEADER(0x10e3, 0x8113, quirk_use_pcie_bridge_dma_alias); +/* ITE 8892, https://bugzilla.kernel.org/show_bug.cgi?id=73551 */ +DECLARE_PCI_FIXUP_HEADER(0x1283, 0x8892, quirk_use_pcie_bridge_dma_alias); +/* Intel 82801, https://bugzilla.kernel.org/show_bug.cgi?id=44881#c49 */ +DECLARE_PCI_FIXUP_HEADER(0x8086, 0x244e, quirk_use_pcie_bridge_dma_alias); + +/* + * AMD has indicated that the devices below do not support peer-to-peer + * in any system where they are found in the southbridge with an AMD + * IOMMU in the system. Multifunction devices that do not support + * peer-to-peer between functions can claim to support a subset of ACS. + * Such devices effectively enable request redirect (RR) and completion + * redirect (CR) since all transactions are redirected to the upstream + * root complex. + * + * http://permalink.gmane.org/gmane.comp.emulators.kvm.devel/94086 + * http://permalink.gmane.org/gmane.comp.emulators.kvm.devel/94102 + * http://permalink.gmane.org/gmane.comp.emulators.kvm.devel/99402 + * + * 1002:4385 SBx00 SMBus Controller + * 1002:439c SB7x0/SB8x0/SB9x0 IDE Controller + * 1002:4383 SBx00 Azalia (Intel HDA) + * 1002:439d SB7x0/SB8x0/SB9x0 LPC host controller + * 1002:4384 SBx00 PCI to PCI Bridge + * 1002:4399 SB7x0/SB8x0/SB9x0 USB OHCI2 Controller + * + * https://bugzilla.kernel.org/show_bug.cgi?id=81841#c15 + * + * 1022:780f [AMD] FCH PCI Bridge + * 1022:7809 [AMD] FCH USB OHCI Controller + */ +static int pci_quirk_amd_sb_acs(struct pci_dev *dev, u16 acs_flags) +{ +#ifdef CONFIG_ACPI + struct acpi_table_header *header = NULL; + acpi_status status; + + /* Targeting multifunction devices on the SB (appears on root bus) */ + if (!dev->multifunction || !pci_is_root_bus(dev->bus)) + return -ENODEV; + + /* The IVRS table describes the AMD IOMMU */ + status = acpi_get_table("IVRS", 0, &header); + if (ACPI_FAILURE(status)) + return -ENODEV; + + /* Filter out flags not applicable to multifunction */ + acs_flags &= (PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_EC | PCI_ACS_DT); + + return acs_flags & ~(PCI_ACS_RR | PCI_ACS_CR) ? 0 : 1; +#else + return -ENODEV; +#endif +} + +/* + * Many Intel PCH root ports do provide ACS-like features to disable peer + * transactions and validate bus numbers in requests, but do not provide an + * actual PCIe ACS capability. This is the list of device IDs known to fall + * into that category as provided by Intel in Red Hat bugzilla 1037684. + */ +static const u16 pci_quirk_intel_pch_acs_ids[] = { + /* Ibexpeak PCH */ + 0x3b42, 0x3b43, 0x3b44, 0x3b45, 0x3b46, 0x3b47, 0x3b48, 0x3b49, + 0x3b4a, 0x3b4b, 0x3b4c, 0x3b4d, 0x3b4e, 0x3b4f, 0x3b50, 0x3b51, + /* Cougarpoint PCH */ + 0x1c10, 0x1c11, 0x1c12, 0x1c13, 0x1c14, 0x1c15, 0x1c16, 0x1c17, + 0x1c18, 0x1c19, 0x1c1a, 0x1c1b, 0x1c1c, 0x1c1d, 0x1c1e, 0x1c1f, + /* Pantherpoint PCH */ + 0x1e10, 0x1e11, 0x1e12, 0x1e13, 0x1e14, 0x1e15, 0x1e16, 0x1e17, + 0x1e18, 0x1e19, 0x1e1a, 0x1e1b, 0x1e1c, 0x1e1d, 0x1e1e, 0x1e1f, + /* Lynxpoint-H PCH */ + 0x8c10, 0x8c11, 0x8c12, 0x8c13, 0x8c14, 0x8c15, 0x8c16, 0x8c17, + 0x8c18, 0x8c19, 0x8c1a, 0x8c1b, 0x8c1c, 0x8c1d, 0x8c1e, 0x8c1f, + /* Lynxpoint-LP PCH */ + 0x9c10, 0x9c11, 0x9c12, 0x9c13, 0x9c14, 0x9c15, 0x9c16, 0x9c17, + 0x9c18, 0x9c19, 0x9c1a, 0x9c1b, + /* Wildcat PCH */ + 0x9c90, 0x9c91, 0x9c92, 0x9c93, 0x9c94, 0x9c95, 0x9c96, 0x9c97, + 0x9c98, 0x9c99, 0x9c9a, 0x9c9b, + /* Patsburg (X79) PCH */ + 0x1d10, 0x1d12, 0x1d14, 0x1d16, 0x1d18, 0x1d1a, 0x1d1c, 0x1d1e, + /* Wellsburg (X99) PCH */ + 0x8d10, 0x8d11, 0x8d12, 0x8d13, 0x8d14, 0x8d15, 0x8d16, 0x8d17, + 0x8d18, 0x8d19, 0x8d1a, 0x8d1b, 0x8d1c, 0x8d1d, 0x8d1e, +}; + +static bool pci_quirk_intel_pch_acs_match(struct pci_dev *dev) +{ + int i; + + /* Filter out a few obvious non-matches first */ + if (!pci_is_pcie(dev) || pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT) + return false; + + for (i = 0; i < ARRAY_SIZE(pci_quirk_intel_pch_acs_ids); i++) + if (pci_quirk_intel_pch_acs_ids[i] == dev->device) + return true; + + return false; +} + +#define INTEL_PCH_ACS_FLAGS (PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF | PCI_ACS_SV) + +static int pci_quirk_intel_pch_acs(struct pci_dev *dev, u16 acs_flags) +{ + u16 flags = dev->dev_flags & PCI_DEV_FLAGS_ACS_ENABLED_QUIRK ? + INTEL_PCH_ACS_FLAGS : 0; + + if (!pci_quirk_intel_pch_acs_match(dev)) + return -ENOTTY; + + return acs_flags & ~flags ? 0 : 1; +} + +static int pci_quirk_mf_endpoint_acs(struct pci_dev *dev, u16 acs_flags) +{ + /* + * SV, TB, and UF are not relevant to multifunction endpoints. + * + * Multifunction devices are only required to implement RR, CR, and DT + * in their ACS capability if they support peer-to-peer transactions. + * Devices matching this quirk have been verified by the vendor to not + * perform peer-to-peer with other functions, allowing us to mask out + * these bits as if they were unimplemented in the ACS capability. + */ + acs_flags &= ~(PCI_ACS_SV | PCI_ACS_TB | PCI_ACS_RR | + PCI_ACS_CR | PCI_ACS_UF | PCI_ACS_DT); + + return acs_flags ? 0 : 1; +} + +static const struct pci_dev_acs_enabled { + u16 vendor; + u16 device; + int (*acs_enabled)(struct pci_dev *dev, u16 acs_flags); +} pci_dev_acs_enabled[] = { + { PCI_VENDOR_ID_ATI, 0x4385, pci_quirk_amd_sb_acs }, + { PCI_VENDOR_ID_ATI, 0x439c, pci_quirk_amd_sb_acs }, + { PCI_VENDOR_ID_ATI, 0x4383, pci_quirk_amd_sb_acs }, + { PCI_VENDOR_ID_ATI, 0x439d, pci_quirk_amd_sb_acs }, + { PCI_VENDOR_ID_ATI, 0x4384, pci_quirk_amd_sb_acs }, + { PCI_VENDOR_ID_ATI, 0x4399, pci_quirk_amd_sb_acs }, + { PCI_VENDOR_ID_AMD, 0x780f, pci_quirk_amd_sb_acs }, + { PCI_VENDOR_ID_AMD, 0x7809, pci_quirk_amd_sb_acs }, + { PCI_VENDOR_ID_SOLARFLARE, 0x0903, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_SOLARFLARE, 0x0923, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_INTEL, 0x10C6, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_INTEL, 0x10DB, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_INTEL, 0x10DD, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_INTEL, 0x10E1, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_INTEL, 0x10F1, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_INTEL, 0x10F7, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_INTEL, 0x10F8, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_INTEL, 0x10F9, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_INTEL, 0x10FA, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_INTEL, 0x10FB, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_INTEL, 0x10FC, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_INTEL, 0x1507, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_INTEL, 0x1514, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_INTEL, 0x151C, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_INTEL, 0x1529, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_INTEL, 0x152A, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_INTEL, 0x154D, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_INTEL, 0x154F, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_INTEL, 0x1551, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_INTEL, 0x1558, pci_quirk_mf_endpoint_acs }, + /* 82580 */ + { PCI_VENDOR_ID_INTEL, 0x1509, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_INTEL, 0x150E, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_INTEL, 0x150F, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_INTEL, 0x1510, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_INTEL, 0x1511, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_INTEL, 0x1516, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_INTEL, 0x1527, pci_quirk_mf_endpoint_acs }, + /* 82576 */ + { PCI_VENDOR_ID_INTEL, 0x10C9, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_INTEL, 0x10E6, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_INTEL, 0x10E7, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_INTEL, 0x10E8, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_INTEL, 0x150A, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_INTEL, 0x150D, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_INTEL, 0x1518, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_INTEL, 0x1526, pci_quirk_mf_endpoint_acs }, + /* 82575 */ + { PCI_VENDOR_ID_INTEL, 0x10A7, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_INTEL, 0x10A9, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_INTEL, 0x10D6, pci_quirk_mf_endpoint_acs }, + /* I350 */ + { PCI_VENDOR_ID_INTEL, 0x1521, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_INTEL, 0x1522, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_INTEL, 0x1523, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_INTEL, 0x1524, pci_quirk_mf_endpoint_acs }, + /* 82571 (Quads omitted due to non-ACS switch) */ + { PCI_VENDOR_ID_INTEL, 0x105E, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_INTEL, 0x105F, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_INTEL, 0x1060, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_INTEL, 0x10D9, pci_quirk_mf_endpoint_acs }, + /* Intel PCH root ports */ + { PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_quirk_intel_pch_acs }, + { 0x19a2, 0x710, pci_quirk_mf_endpoint_acs }, /* Emulex BE3-R */ + { 0x10df, 0x720, pci_quirk_mf_endpoint_acs }, /* Emulex Skyhawk-R */ + { 0 } +}; + +int pci_dev_specific_acs_enabled(struct pci_dev *dev, u16 acs_flags) +{ + const struct pci_dev_acs_enabled *i; + int ret; + + /* + * Allow devices that do not expose standard PCIe ACS capabilities + * or control to indicate their support here. Multi-function express + * devices which do not allow internal peer-to-peer between functions, + * but do not implement PCIe ACS may wish to return true here. + */ + for (i = pci_dev_acs_enabled; i->acs_enabled; i++) { + if ((i->vendor == dev->vendor || + i->vendor == (u16)PCI_ANY_ID) && + (i->device == dev->device || + i->device == (u16)PCI_ANY_ID)) { + ret = i->acs_enabled(dev, acs_flags); + if (ret >= 0) + return ret; + } + } + + return -ENOTTY; +} + +/* Config space offset of Root Complex Base Address register */ +#define INTEL_LPC_RCBA_REG 0xf0 +/* 31:14 RCBA address */ +#define INTEL_LPC_RCBA_MASK 0xffffc000 +/* RCBA Enable */ +#define INTEL_LPC_RCBA_ENABLE (1 << 0) + +/* Backbone Scratch Pad Register */ +#define INTEL_BSPR_REG 0x1104 +/* Backbone Peer Non-Posted Disable */ +#define INTEL_BSPR_REG_BPNPD (1 << 8) +/* Backbone Peer Posted Disable */ +#define INTEL_BSPR_REG_BPPD (1 << 9) + +/* Upstream Peer Decode Configuration Register */ +#define INTEL_UPDCR_REG 0x1114 +/* 5:0 Peer Decode Enable bits */ +#define INTEL_UPDCR_REG_MASK 0x3f + +static int pci_quirk_enable_intel_lpc_acs(struct pci_dev *dev) +{ + u32 rcba, bspr, updcr; + void __iomem *rcba_mem; + + /* + * Read the RCBA register from the LPC (D31:F0). PCH root ports + * are D28:F* and therefore get probed before LPC, thus we can't + * use pci_get_slot/pci_read_config_dword here. + */ + pci_bus_read_config_dword(dev->bus, PCI_DEVFN(31, 0), + INTEL_LPC_RCBA_REG, &rcba); + if (!(rcba & INTEL_LPC_RCBA_ENABLE)) + return -EINVAL; + + rcba_mem = ioremap_nocache(rcba & INTEL_LPC_RCBA_MASK, + PAGE_ALIGN(INTEL_UPDCR_REG)); + if (!rcba_mem) + return -ENOMEM; + + /* + * The BSPR can disallow peer cycles, but it's set by soft strap and + * therefore read-only. If both posted and non-posted peer cycles are + * disallowed, we're ok. If either are allowed, then we need to use + * the UPDCR to disable peer decodes for each port. This provides the + * PCIe ACS equivalent of PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF + */ + bspr = readl(rcba_mem + INTEL_BSPR_REG); + bspr &= INTEL_BSPR_REG_BPNPD | INTEL_BSPR_REG_BPPD; + if (bspr != (INTEL_BSPR_REG_BPNPD | INTEL_BSPR_REG_BPPD)) { + updcr = readl(rcba_mem + INTEL_UPDCR_REG); + if (updcr & INTEL_UPDCR_REG_MASK) { + dev_info(&dev->dev, "Disabling UPDCR peer decodes\n"); + updcr &= ~INTEL_UPDCR_REG_MASK; + writel(updcr, rcba_mem + INTEL_UPDCR_REG); + } + } + + iounmap(rcba_mem); + return 0; +} + +/* Miscellaneous Port Configuration register */ +#define INTEL_MPC_REG 0xd8 +/* MPC: Invalid Receive Bus Number Check Enable */ +#define INTEL_MPC_REG_IRBNCE (1 << 26) + +static void pci_quirk_enable_intel_rp_mpc_acs(struct pci_dev *dev) +{ + u32 mpc; + + /* + * When enabled, the IRBNCE bit of the MPC register enables the + * equivalent of PCI ACS Source Validation (PCI_ACS_SV), which + * ensures that requester IDs fall within the bus number range + * of the bridge. Enable if not already. + */ + pci_read_config_dword(dev, INTEL_MPC_REG, &mpc); + if (!(mpc & INTEL_MPC_REG_IRBNCE)) { + dev_info(&dev->dev, "Enabling MPC IRBNCE\n"); + mpc |= INTEL_MPC_REG_IRBNCE; + pci_write_config_word(dev, INTEL_MPC_REG, mpc); + } +} + +static int pci_quirk_enable_intel_pch_acs(struct pci_dev *dev) +{ + if (!pci_quirk_intel_pch_acs_match(dev)) + return -ENOTTY; + + if (pci_quirk_enable_intel_lpc_acs(dev)) { + dev_warn(&dev->dev, "Failed to enable Intel PCH ACS quirk\n"); + return 0; + } + + pci_quirk_enable_intel_rp_mpc_acs(dev); + + dev->dev_flags |= PCI_DEV_FLAGS_ACS_ENABLED_QUIRK; + + dev_info(&dev->dev, "Intel PCH root port ACS workaround enabled\n"); + + return 0; +} + +static const struct pci_dev_enable_acs { + u16 vendor; + u16 device; + int (*enable_acs)(struct pci_dev *dev); +} pci_dev_enable_acs[] = { + { PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_quirk_enable_intel_pch_acs }, + { 0 } +}; + +void pci_dev_specific_enable_acs(struct pci_dev *dev) +{ + const struct pci_dev_enable_acs *i; + int ret; + + for (i = pci_dev_enable_acs; i->enable_acs; i++) { + if ((i->vendor == dev->vendor || + i->vendor == (u16)PCI_ANY_ID) && + (i->device == dev->device || + i->device == (u16)PCI_ANY_ID)) { + ret = i->enable_acs(dev); + if (ret >= 0) + return; + } + } +} |